Eduard 8487 Fokker Dr.I, схема сборки

Fokker Dr.I

8487 1/48

PLASTIC PARTS

A>

B> 8160 A

8160 B

C>

8160 C GUNZE H3 C3 H4 C4 H11 C62 H12 C33 H27 C44 H37 C43 H47 C41 H51 C11 H52 C12 H70 C60 H77 C74 Mr.METAL COLOR

MISSION MODELS

MMP-003 MMP-001 MMM-007 MMP-001 MMP-047 MMP-047 MMP-047 MMP-012 MMP-063 MMP-091 MMP-056 MMP-061

RED YELLOW FLAT WHITE FLAT BLACK TAN WOOD BROWN RED BROWN LIGHT GULL GRAY OLIVE DRAB GRAY AIR SUPERIORITY BLUE

METALLICS

MC213 MMM-006 MC214 MMM-001 MC218 MMM-003 MC219 MMM-009

STEEL DARK IRON ALUMINIUM BRASS

-Parts not for use. -Teile werden nicht verwendet. -Pieces a ne pas utiliser. -Tyto díly nepoužívejte při stavbě. -

ATTENTION

ACHTUNG

UPOZORNENÍ

ATTENTION

GB

Carefully read instruction sheet before assembling. When you use glue or paint, do not use near open flame and use in well ventilated room. Keep out of reach of small children. Children must not be allowed to suck any part, or pull vinyl bag over the head.

CZ

Před započetím stavby si pečlivě prostudujte stavební návod. Při používání barev a lepidel pracujte v dobře větrané místnosti.

Lepidla ani barvy nepoužívejte v blízkosti otevřeného ohně. Model není určen malým dětem, mohlo by dojít k požití drobných dílů.

D

Vor dem Zusammenbau die Bauanleitung gut durchlesen. Kleber und Farben nicht in der Nähe von offenem Feuer verwenden und für eine ausreichende Belüftung sorgen. Den Bausatz von kleinen Kindern fernhalten. Vermeiden Sie, dass Kinder Bauteile in den Mund nehmen oder sich Plastiktüten über den Kopf ziehen.

F

Iire soigneusement la fiche d´instructions avant d´assembler. Ne pas utiliser de colle ou de peinture à proximité d´une flamme nue, et aérer la piece de temps en temps. Garder hors de portée des enfants en bas âge. Ne pas laisser les enfants mettre en bouche ou sucer les pièces, ou passer un sachet vinyl sur la tetê.

INSTRUCTION SIGNS OPTIONAL VOLBA

BEND OHNOUT

SAND BROUSIT

INSTR. SYMBOLY OPEN HOLE VYVRTAT OTVOR

INSTRUKTION SINNBILDEN

SYMETRICAL ASSEMBLY SYMETRICKÁ MONTÁŽ

REMOVE ODŘÍZNOUT

REVERSE SIDE OTOČIT

SYMBOLES APPLY EDUARD MASK AND PAINT POUŽÍT EDUARD MASK NABARVIT

8487 - NAV1

H37 C43

C29

WOOD BROWN

A1

H52 MMP C12 091 H70 MMP C60 056

OLIVE DRAB

H37 C43

H70 MMP C60 056

GRAY

H37 C43

WOOD BROWN

GRAY

WOOD BROWN

C9

C29

decal 30

H47 MMP C41 012 RED BROWN

C26 H70 MMP C60 056

H70 MMP C60 056

C19

C27

GRAY

GRAY

H70 MMP C60 056 GRAY

C40

H37 C43

C6

WOOD BROWN

B5

H70 MMP C60 056 GRAY

decal 35 decal 34

A1

decal 33

plastic - 2,2 mm l - 0,5 mm

decal 29

decal 33

H47 MMP C41 012 RED BROWN

C13

H27 C44

C12

TAN

H70 MMP C60 056 GRAY

C3

C23 H37 C43 WOOD BROWN

C3 2

H70 MMP C60 056 GRAY

A1

B6 MC218 MMM 003 ALUMINIUM

A1 C39

- 1,8 mm l - 0,5 mm

plastic C39

H70 MMP C60 056 GRAY

decal 31

B4 MC218 MMM 003 ALUMINIUM

B4

B6

C39

C19 3

H37 C43 WOOD BROWN

H52 MMP C12 091 OLIVE DRAB

H70 MMP C60 056 GRAY

B14

C16 H70 MMP C60 056 GRAY

A1 C36

B14

4

decal 32

C25 C25

C7 A8

A8

A8

C42

A2

A3

5

B12

B1

H70 MMP C60 056 GRAY

MC214 MMM 001

C38

DARK IRON

C18

C22

C30

H37 C43 WOOD BROWN

H70 MMP C60 056 GRAY

C38 H70 MMP C60 056 GRAY

6

C35

B10

MC214 MMM 001

B3

DARK IRON

B10

B3 C35 MC214 MMM 001

C35

DARK IRON

A

MC219 MMM 009

H47 MMP C41 012

C2

C24

BRASS

RED BROWN

MC218 MMM 003

C5

ALUMINIUM

C28 C2

C31 MC214 MMM 001 DARK IRON

MC214 MMM 001 DARK IRON

MC218 MMM 003 ALUMINIUM

MC218 MMM 003

C31

MC214 MMM 001 DARK IRON

ALUMINIUM

MC218 MMM 003 ALUMINIUM

MC218 MMM 003 ALUMINIUM

B11

A 7

MC218 MMM 003

C11

ALUMINIUM

C34

A9 A9

C10 MC214 MMM 001

B7

DARK IRON

C10 MC214 MMM 001 DARK IRON

A10 B7

C21 C14

8

C20 A6

C41

C37

C15

B9

B13

A7 B9

C33

C17 C33

C17

C1

9

A

479/17 flown by Ltn. A. Raben, Jasta 18, Montingen (Montoy – Flanville now), France, October 1918

After command of Jasta 18 was handed over to August Raben, who previously CO'd Jasta 11, the appearance of the unit's fighters went through some changes. Originally, the noses of the fighters were in red, while the remaining upper and side surfaces were in dark blue. Now, the upper and side surfaces of the front of the aircraft were in red while the rear section including tail were in white. The lower surfaces remained in the factory blue.

The sides of the fuselage were painted with a black or white bird which symbolized the CO's name, since the translation of Rabe is 'Raven'. The original white base colour in the crosses on the upper wing were irregularly overpainted with red after the changes to the national markings were implemented in the spring of 1918.

B

503/17, Ltn. Hans Körner, Jasta 19, Balatre, Belgium, April 1918

The road of combat for Hans Körner was anything but typical. He joined in the ranks of Jasta 8 on the January 8th, 1917 and two days later downed an observation balloon at Yper. In February he was transferred to Jasta 27, returning to Jasta 8 after only two weeks. By May he moved on to the ranks of FA(A) 246 on the Macedonian Front, where he would gain his second victory. In October 1917 he found himself bac kat Jasta 8 for a third time, where he achieved another victory. In December he was once again transferred, this time to Jasta 19. Here he would serve out the war, and also down a further four enemy aircraft. Flying, which continued to do after the war, proved to be fateful to him in an indirect way – he died in a motorcycle accident on his way to the airfield. Hans Korner’s aircraft sporting the factory paint finish consisting of the brush-painted parallel stripes of the olivegreen paint applied to the canvas covering the frame structure, carried the white flashes marking on the sides and top of the fuselage. The horizontal tail surfaces were painted in yellow with black stripes, the engine cowling was white, both used as the Jasta 19 markings.

UNDERSURFACE OF THE WINGS

21?36

21?36

21?36

21?36

21?36

12 © EDUARD

eduard

M.A. 2019

www.eduard.com

Made in Czech Republic