Newsletter issue 3

Inside this issue: - 5 Wire Oxygen Sensors - Motorcycle TPMS - Clogging in EGR Valves - Website Updates

Welcome to Issue 3 of the Mobiletron newsletter!

Our newsletter is specifically designed to keep you up to date with the developments at Mobiletron.

This quarterly newsletter will be full of company updates, news, new products and useful tips.

HOT PRODUCTS VR-LC11

VR-H2009-204

RV-H034

CS-E149

www.mobiletron.co.uk

Newsletter - Issue 3

5 WIRE OXYGEN SENSORS

FOR MAXIMUM PERFORMANCE AND BETTER FUEL ECONOMY Increase engine efficiency Decrease exhaust emissions Quicker response to changing environmental conditions More accuracy than narrow band oxygen sensors Senses a wider range of lambda and air/fuel ratio values compared to narrow band sensor

MOTORCYCLE TPMS RETROFIT SYSTEM

PSI

°C

Easy to install, simple to operate Real time tyre pressure & temperature Fuel saving and reduces chance of blow-out Wireless transmission and reception

CLOGGING IN EGR VALVES Causes of EGR valves clogging EGR valves can be controlled either by vacuum or electronically. Both are at risk to sticking or not seating correctly due to an accumulation of soot, carbon and even oil around the valve seat or spool.

This can be caused by original engine issues which can prematurely block the EGR valve, causing the Engine Management Light to light up and EGR fault codes to be stored in the ECU (Electronic Control Unit).

When carbon and soot deposits build up around the valve seat, the valve is not able to fully close. As a result, when in its rest position, the EGR valve lets the flow of exhaust gas back into the cylinders when it’s not necessary.

More and more EGR valves now have important position sensors which direct valve position data to the ECU. If an unexpected valve position is registered due to it not seating properly, the engine management light will illuminate.

HAVE YOU SEEN...

The updates to our website?

We have updated our website!

We have added fresh new images, information and made it better for you to use.

Be sure to check it out!

www.mobiletron.co.uk

All manufactured products are individually tested during production under strict TS16949 quality controls.

We are a certified data supplier to TecDoc. All our products are listed on Autocat to help you reference our products. We aim to provide as much technical information as possible with our new MobCAT ecatalogue at www.mobiletron.co.uk

However if you are unable to find a cross reference, fitment advice or dimension data for a Mobiletron component our technical team are available from MON - FRI 8.30am – 5.00pm 01772 693780, alternatively you can email our technical team on technical@mobiletron.co.uk

Mobiletron UK, Unit 80 Roman Way Industrial Est., Longridge Rd, Preston, Lancashire, PR2 5BE For any questions about our product and services or for more information on how we can support your business don’t hesitate to contact us.

+44 (0)1772 693780 Sales enquiries

sales@mobiletron.co.uk

Technical enquiries

technical@mobiletron.co.uk

Come join us on on Facebook, Linkedin and Twitter. You can find us by searching for

@mobiletronuk