C L E AR S
Available in Three Levels of Sheen On Oak Satin
SATIN A traditional choice for a natural appearance in high-use areas such as floors and table tops. Available in Oil-based Polyurethane, Water-based Polyurethane, Varnish, Brushing Lacquer
SEMI-GLOSS The perfect combination of both natural beauty and durable performance. Available in Oil-based Polyurethane, Water-based Polyurethane, Varnish, Brushing Lacquer
GLOSS The premium choice for a lustrous finish with added depth and brilliance. Available in Oil-based Polyurethane, Water-based Polyurethane, Varnish, Brushing Lacquer
For Every Interior Application OIL-BASED POLYURETHANE
A durable finish which protects interior wood surfaces from nicks,
Combines superior durability with faster dry-times
scratches, spills and stains. This easy-to-apply polyurethane dries to a
and the convenience of soap and water clean-up.
clear finish, which enhances the natural wood grain. Ideal for use on
This finish is formulated with an advanced resin that
interior surfaces including floors, doors,
yields superior results on virtually every type
furniture and cabinets.
of interior wood surface such as furniture, trim, paneling and floors.
Enriches fine wood surfaces with a beautiful finish that pro-
A super-fast drying clear finish that provides
tects surfaces from minor nicks, scratches, spills and stains.
superior leveling on wood doors, furniture,
Ideal for interior fine wood, furniture and cabinets.
woodwork, cabinets and shelves.
Special Products for Unique Results TEAK OIL Provides a rich, deeppenetrating oiled appearance while restoring and maintaining teak wood with a premium blend of natural ingredients.
TUNG OIL A deep-penetrating formula that revitalizes wood while it imparts a striking, handrubbed beauty to both bare and stained wood surfaces.
An easily-applied and protective polyurethane finish with a traditional hand-rubbed appearance.
T E C H N I C A L DESCRIPTION Recommended Uses: Cabot PRO.V.T. covers previously painted or stained surfaces in just one coat, improving project completion time and maximizing labor efficiencies. Cabot PRO.V.T. is so advanced that it does not require the use of a primer coat on non-extractive-prone wood species such as pine, white cedar or cypress. In addition, this product has been developed and tested for use in colder temperatures, extending the exterior maintenance season for professionals in cooler climates. This versatile, fade resistant and water-repellent exterior stain provides superior results when applied on new or reconditioned wood siding and shingles, cement siding, manufactured hardboards, previously painted surfaces, aluminum and pre-primed ferrous metal, masonry, stucco and plywood panel siding. Composition: Advanced 100% acrylic, richly pigmented, opaque stain. Finish: Dries to a flat finish. Colors: Available in high-hiding Ultra White #0812 and four bases for tinting to an unlimited color selection. Tinting/Intermixing: Cabotâ€™s PRO.V.T. is available in four tint bases; White #0801, Neutral #0806, Deep #0807 and Medium #0808, that must be tinted with compatible universal colorants.
I N F O R M A T I O N
Coverage: On smooth surfaces covers approximately 300-400 square feet per gallon (7.4-9.8 square meters per liter) and on rough surfaces 200-300 square feet per gallon (4.9-7.4 square meters per liter). These rates will vary depending on the porosity of the surface. Packaging/Containers: Available in one-gallon and five-gallon containers. TECHNICAL DATA Cleanup and Disposal: Clean brushes and equipment with warm water and soap or detergent. Drying Time: Approximately 1 hour, recoat after 4 hours. Note that cold temperatures and/or high humidity may impede the dry time. Pigment Type: Titanium dioxide, iron oxide pigments, light-fast organic pigments and silica. Vehicle Type: 100% acrylic resin. V.O.C. Content: Maximum of 350 grams per liter (2.92 lbs./gal.). APPLICATION Surface Preparation: Proper surface preparation is the key to maximum stain performance.
Stirring: Stir thoroughly before and occasionally while using. If the job requires more than one container, or different batches are used, blend them together to ensure uniformity of color. Application Methods: Apply evenly with a brush or spray. Best results can be obtained by using a high-quality, synthetic bristle brush or airless sprayer. Always backbrush immediatly after each section is coated to ensure proper penetration. Apply stain to small sections at a time. To avoid lap marks, start at one edge and follow through to the end of the boards or to a natural break such as a door, window or corner. Dramatic color changes may require more than one coat. LIMITED WARRANTY If this product does not perform as stated on the label after you apply it according to label directions, Samuel Cabot Incorporated will either replace this product or refund its purchase price, at its option. Samuel Cabot Incorporated disclaims all other implied or express warranties. Samuel Cabot Incorporated will not provide or pay for labor for removal or application of the product. This warranty excludes all incidental or consequential damages. This warranty gives you specific legal rights, and you may have other rights which vary from state to state.
Samuel Cabot Incorporated 100 Hale Street, Newbur yport, Massachusetts 01950 (800) US-STAIN www.cabotinter iors.com