Different Layers of Insulations for the Buildings-insulationmachines.net While insulation layers of more than 20 centimeters are often applied when insulating the building from the outside and also in the area of the inner roof, the optimum insulation layer for interiors is "only" six to eight centimeters thick. According to the Hessian Ministry for the Environment and Energy, Agriculture and Consumer Protection, the first six centimeters of insulation cause the greatest reduction in energy loss. Because: The energy losses through thermal bridges increase disproportionately, the thicker the internal insulation panels are. Thicker insulation would bring hardly any noticeable savings - but would risk for. The use of the used insulation blowing machine is essential in this matter now. The so-called heat transfer coefficient (abbreviated U value and given in units of watts per square meter and Kelvin), is usually between one and a half and two and a half watts per square meter and Kelvin in older buildings. Proper insulation of the wall from the inside can reduce this U-value to a good 0.5 W / m²K.
Thanks to a rule of thumb, it is even possible to estimate how much oil or gas can be saved from the inside by insulating the wall. It is: Multiply the value of the change in the U-value by the area of the insulated outer walls in square meters and multiply the whole by a factor of 7. The result is the saved liters of fuel oil or the saved cubic meters of gas with an insulation of the inner walls. Increase damage due to moisture very much.
Insulating materials for inner insulation, however, are now well able to counteract a high content of moisture in the outer skin. With the insulation machines for sale you can make use of the same and come up with the solutions now. One differentiates thereby: Diffusion-proof inner insulation The relatively small thickness of the insulation inside, however, is advantageous in that an insulation of the walls and ceilings from the inside always means a smaller reduction of the subsequently still available living space. For that you definitely require the used industrial insulation blower now. Materials for interior insulation of walls and ceilings To insulate walls and ceilings from the inside, there are now a whole series of insulation materials. These differ in their insulating effect and the side effects they possess. The differences are due to the origin of the insulation materials. Basically, one should know that as insulation boards for the inner insulation only those come into question, which are expressly provided for in accordance with the standard DIN 4108 Part 10.