OILS & LUBRICATION


![]()



4-Stroke Motor Oil 5
2-Stroke Motor Oil 6
9
4-Stroke Motor Oil 11
2-Stroke Motor Oil 14
Oil 15
17
Oil 17
4-Stroke
4-Stroke Motor Oil 77
4-Stroke Motor Oil 20
2-Stroke Motor Oil 22
Oil 23
25
25
4-Stroke Motor Oil 27 2-Stroke Motor Oil 30
Oil 30
4-Stroke Motor Oil 60
4-Stroke Motor Oil 80




AMSOIL Synthetic Marine Engine Oil is a premium synthetic formulation designed to withstand the heat and stress of high-rpm operation and deliver excellent wear protection. It protects against rust and corrosion during periods of inactivity and long-term storage to keep your engine protected, even when it’s not running.
AMSOIL Synthetic Marine Engine Oil is perfect for hardcore anglers and boating enthusiasts who demand the best protection for their marine engines.
• 100% Synthetic
• NMMA FC-W Catalyst Compatible
• API SM, JASO MA


Engine performance and reliability are key to a successful day fishing or boating. High-rpm operation and constant exposure to water, however, invite engine wear and formation of rust and corrosion, reducing engine performance and life. AMSOIL 25W40 Synthetic Blend Marine Engine Oil guards against wear while delivering excellent protection against rust and corrosion. It is Warranty Secure® and will not void your marine engine’s warranty.
• Synthetic Blend
• NMMA FC-W Catalyst Compatible
• API SM

AMSOIL Synthetic ATV/UTV Motor Oil is formulated to deliver upgraded performance for hard-working and performance ATVs and UTVs. Its outstanding severe-service formulation allows riders to confidently and safely push their machines to the limit, whether tackling tough chores around their property or riding aggressively on the trail.
• 100% Synthetic
• API SL, JASO MA


Designed for top engine and transmission performance and ideal for equipment pushed hard on the trail or on the job. Anti-wear fortified and wet-clutch compatible. All-climate/all-season formula for excellent performance in both cold and hot temperature extremes. Use in ATVs, snowmobiles and other powersports applications that require 0W-30, 0W-40, 5W-30, 5W-40, 10W-30 or 10W-40 oil.



• 100% Synthetic
• API SN, SM, SL/CF, SJ, SH, SG
• JASO MA/MA2
• ISO-L-EMA2

Engineered for maximum performance in V-twin engines, motorcycle transmissions and primary chaincases. Protects against extreme heat. Wet-clutch compatible. Advanced synthetic formulation resists viscosity loss to keep critical components clean and protected.
• 100% Synthetic
• API SG, SH, SL
• JASO MA/MA2
• ISO-L-EMA2




Strenuous conditions define the normal operating environments of snowmobiles and boats. Without the right lubrication, two-stroke snowmobile engines and outboard motors run hotter, accumulate deposits and suffer a reduction in performance. AMSOIL Synthetic 2-Stroke Injector Oil offers the convenience of one formula for the tough conditions of all twostroke recreational equipment. It is tested and proven to minimize wear and deposits that can damage internal components. Provides quality and affordability for cost-conscious enthusiasts who want the benefits of synthetic two-stroke oil. Use as injection oil or 50:1 pre-mix.
• 100% Synthetic
• API TC, TC-W3


High-quality oil is critical for maximum performance in modern twostroke marine motors. Direct fuel injection (DFI) improves combustion efficiency, delivering the extra power boaters want, while leaner gas-to oil ratios provide the reduced exhaust emissions. Excellent for Evinrude® E-TEC™ factorylean setting (replaces Evinrude XD100™ 2-Cycle Oil). Helps prevent deposits, protects against wear, has low smoke, protects against rust and has low aquatic toxicity. Superior performance as an injection oil or at 50:1 pre-mix.
• 100% Synthetic
• TC-W3

True marine gear performance. Provides superior protection from shock loading. Resists foam and retains extreme-pressure qualities even when subjected to 10% water contamination. For use in outboard lower units, sterndrives, V-drives, bow and tunnel thrusters and marine transmissions Excellent for use in ATVs.
• 100% Synthetic
• API GL-4, GL-5
55-653-001


Amsoil 75W/80W-90 Gear lube 946ml
55-653-020 Amsoil 75W/80W-90 Gear lube 18,93L
55-653-295 Amsoil 75W/80W-90 Gear lube 295ml
SEVERE GEAR is designed for those who demand the best. Engineered with high film strength for high-load demands. Reduces friction and provides the ultimate protection against wear. Excels in extreme temperatures. Helps maintain efficiency and outperforms conventional gear oils.
• 100% Synthetic
• API GL-5, MT-1, MILPRF-2105E, Dana SHAES 234, Mack GO-J


AMSOIL Synthetic Chaincase & Gear Oil provides superior protection and performance for enclosed chains and gears found in snowmobiles, ATVs and general equipment. Formulated with extremepressure additives, it helps extend chain and gear life through increased wear protection. AMSOIL Synthetic Chaincase & Gear Oil repels water, while also inhibiting rust, oxidation and foam. Its low pour point ensures superior low-temperature starting, reducing drag to deliver maximum power.
• 100% Synthetic


AMSOIL Synthetic ATV/UTV Powertrain Fluid is purpose-built and recommended by AMSOIL for use in Polaris ATV/UTV transmission/differentials and front drives. Its unique formulation provides the convenience of buying only one lubricant for both areas instead of having to buy two different original equipment manufacturer (OEM) lubricants. It offers enthusiasts a high-performance alternative to OEM fluids.
• 100% Synthetic

SYNTHETIC ATV/UTV TRANSMISSION & DIFFERENTIAL FLUID
AMSOIL Synthetic ATV/UTV Transmission & Differential Fluid is engineered to deliver upgraded performance for hard-working and performance ATVs and UTVs. Its outstanding severe-service formulation allows riders to confidently and safely push their machines to the limit, whether tackling tough chores around their property or riding aggressively on the trail.
• 100% Synthetic
• API GL-5


Superior Lubrication and Protection in Automotive, Powersports and Industrial Applications. Resists water washout and degradation. Unparalleled protection for boat trailer wheel bearings and other components frequently exposed to water. Stays in place, lubricates and protects against rust.

AMSOIL Power Foam® (APF) improves engine performance by removing gum, varnish and carbon deposits that affect power, operation, idle and fuel economy. Power Foam cleans intake valves, intake manifolds and throttle plates to keep the combustion intake system running at peak efficiency. Effective in both two- and four-stroke gasoline engines, Power Foam helps reduce engine ping and keeps carburetors and injector systems operating like new.


A highly-effective rust preventative designed to protect internal engine components during storage or long periods of inactivity. Ideal for outboard motors, lawn and garden equipment, motorcycles, snowmobiles, ATVs, motor homes and generators or any equipment with a two- or four-stroke engine.

Helps keep fuel fresh for up to 12 months. Fights oxidation to prevent the formation of varnish and sludge and keep floats and injectors clean for optimal engine performance. Ideal for stored seasonal equipment such as snowmobiles, lawnmowers, motorcycles and boats. Eases starting process when equipment is taken out of storage.

Cleans powersports fuel systems. Addresses ethanol-related performance issues. Stabilizes fuel during short-term storage. Designed for use in all two- and four-stroke gasoline-powered engines, including motorcycles, snowmobiles, boats, ATVs/UTVs, edgers, tillers, mowers, snowblowers, chainsaws, generators and farm/construction equipment. One 236-ml bottle treats up to 23 litres for cleanup and up to 45 litres for continued protection. For best protection, use with every tank.




Bel-Ray EXS Full Synthetic Ester 4T Engine Oil is a premium motorcycle oil that uses the finest quality synthetic hydrocarbon and ester base fluids combined with unique Extreme Pressure, anti-wear additives and shear resistant VI improvers to meet the demands of high-performance applications. Lowers engine temperatures and increases horsepower. Meets the performance requirements of API SN and JASO MA2. Suitable for air-cooled/ liquid-cooled 4-stroke engines and wet clutches.
• Synthetic Ester and PAO base fluid formula
• Delivers ultimate performance, protection and power
• Increased value from extended drain intervals
• Premium transmission and wet clutch performance
55-931-001 EXS Full Synthetic Ester 4T Engine Oil 10W-40 1L 55-931-004

Bel-Ray EXP Synthetic Ester Blend 4T Engine Oil is a 4-stroke motorcycle oil that combines the finest quality synthetic oils with select mineral base oils ensuring the highest level of protection for all 4-stroke motorcycles. Contains shear resistant VI improvers to resist viscosity breakdown. Meets the performance requirements of API SN and JASO MA2. Suitable for air-cooled/ liquid-cooled 4-stroke engines and wet clutches.
• Synthetic Ester blended with select synthetic and petroleum components
• Provides exceptional component protection and increased horsepower
• Premium anti-wear properties
• JASO

Bel-Ray EXL Mineral 4T Engine Oil is a premium 4-stroke motorcycle oil. Meets the performance requirements of API SN and JASO MA2. Suitable for air-cooled/liquid-cooled 4-stroke engines and wet clutches.
• Delivers outstanding protection
• Exceeds all OEM requirements
• Long change intervals
• Excellent transmission and wet clutch performance
JASO MA2 , API SN

ATV & SxS 4T engine oil is a premium multi-grade engine oil developed for the unique demands of all 4-stroke ATVs, side-byside (SxS), Quads, and UTVs. This specially formulated engine oil provides superior protection and lubrication performance for any 4-stroke ATV, air-cooled or liquid-cooled. ATV & SxS 4T is wet clutch compatible and can be used to lubricate transmissions in vehicles that share oil for the engine and transmission. Bel-Ray ATV & SxS 4T engine oil is the best choice for off-road recreational and utility vehicles.
Application: Any ATV recommending 10W-40, 15W-40, or 20W-40 4T engine oil
• Bel-Ray's Rust Defense System (RDS) additive chemistry
• Exclusive Bel-Ray anti-wear additives
• Low volatility base oils
• Superior detergency and deposit contro

Shop Oil is an excellent value, premium multi-grade petroleum motor oil for service departments, shop fill and new and rebuilt engine run-in. Formulated for 4-stroke motorcycles and other 4-stroke performance engines. It is designed for topping off, service fills, as well as new and rebuilt engine run-in. It has all the superior lubrication performance of Bel-Ray’s additive chemistry and high Viscosity Index, low-volatility, petroleum base oils to provide premium 4-stroke engine protection.
• Provides excellent performance, engine protection and reliable allseason use
• Equally suitable for air-cooled and liquid-cooled engines
• Superior deposit control reduces sludge and varnish for cleaner, cooler running engines
• Minimizes deposit formation and reduces oil consumption

V-Twin Mineral Engine Oil 20W-50 is a value priced, multi-grade, 4-stroke motorcycle oil formulated for V-Twin engines. It is formulated with high viscosity Index and low volatility petroleum base oils.
• Delivers outstanding protection
• Exceeds all OEM specifications
• Long change intervals
• Excellent transmission and wet clutch performance for V-Twins with shared transmissions compartments
JASO MA2 , API SN

V-Twin Semi-Synthetic Engine Oil 20W-50 is a synthetic blend, multi-grade V-Twin motorcycle oil formulated to meet the specific demands of large displacement V-Twin engines. It combines the benefits of fully-synthetic oils with the lower cost of petroleum oils.
• Synthetic Ester blended with select synthetic and petroleum components
• Provides exceptional component protection and increased horsepower
• Premium anti-wear properties
• Superior transmission and wet clutch performance for V-Twins with shared transmissions compartments
JASO MA2 , API SN

V-Twin Synthetic Engine Oil 10W-50 is a multi-grade synthetic motorcycle oil formulated to meet the specific demands of large displacement V-Twin engines. It combines the benefits of fully-synthetic base oils with high performance additives.
• Synthetic Ester and PAO base fluid formula
• Delivers ultimate performance, protection and power
• Better cooling performance for hot engines
• Premium transmission and wet clutch performance for V-Twins with shared transmissions compartments

SAE Viscosity Grade & Outdoor Temperature
SAE 20W-50
SAE 15W-50
SAE 10W-40
SAE 10W-30


Bel-Ray Thumper Racing Works Synthetic Ester 4T Engine Oil is a 4-stroke synthetic motorcycle racing oil that has been developed for full works competition use and is designed to withstand extreme racing conditions. Full synthetic ester base oils withstand the highest temperatures and stresses and provide the ultimate performance for 4-stroke motorcycles. Meets API SN and JASO MA2 requirements. Suitable for air-cooled/liquid-cooled 4-stroke engines and wet clutches.
• Synthetic ester formula for the ultimate Thumper performance
• Withstands extreme racing conditions
• For air-cooled/liquid-cooled 4T engines with wet clutches
JASO MA2 , API SN

SAE 5W-40
Motor Oil Viscosity Ratings
Viscosity ratings for commonly used motor oils typically range from O up to 50.
• With multi-viscosity oils, a “W” after the number stands for “Winter” grade oil
Bel-Ray Thumper Racing Synthetic Ester Blend 4T Engine Oil is a 4-stroke motorcycle racing oil that combines the finest quality synthetic esters and highly-refined mineral base oils specifically engineered for today’s 4-stroke single cylinder, multi-valve racing engines. Provides maximum anti-wear protection for valve-trains, rings, cylinders and pistons. Delivers maximum horsepower while providing consistent clutch performance. Meets API SN and JASO MA2 requirements. Suitable for air-cooled/liquid-cooled 4-stroke engines and wet clutches.
• The numeric value of the first number (example 5W-20) is a reference point to the lowest applicable temperature
• The SAE grade is a reference point to the oil viscosity at operating temperatures
• Synthetic ester blend for racing engines
• Maximum horsepower and consistent clutch performance
• Wear protection for valve-trains, rings, cylinders and pistons
• JASO MA2 , API SN

55-818-001
55-818-004
55-825-001
55-825-004
Bel-Ray Thumper Racing 10W-40 Synthetic Ester Blend 4T Engine Oil 1L
Bel-Ray Thumper Racing 10W-40 Synthetic Ester Blend 4T Engine Oil 4L
Bel-Ray Thumper Racing 15W-50 Synthetic Ester Blend 4T Engine Oil 1L
Bel-Ray Thumper Racing 15W-50 Synthetic Ester Blend 4T Engine Oil 4L
Bel-Ray 2T Mineral Engine Oil is a 2-stroke motorcycle oil specially formulated for pre-mix and injector systems for small 2-stroke engines allowing a clean burn that reduces deposits, smoke and engine wear, providing added power and improved reliability.
• Clean-burning, petroleum-based formula for injector/auto-lube or pre-mix applications
• Wear protection extends engine life
• Improves ring seal for maximum compression

Bel-Ray SL-2 Semi-Synthetic 2T Engine Oil is a 2-stroke semi-synthetic motorcycle oil that provides outstanding performance in 2-stroke motorcycle engines. Reduces exhaust smoke and prevents the build-up of carbon deposits to ensure longer lasting, better performing engines. Meets the JASO FD and ISO-L-EGD ratings ensuring the highest level of detergency for better performing, longer running engines. Recommended for both autolube and pre-mix applications.
• Clean-burning synthetic blend for injector/ auto-lube or pre-mix applications
• Wear protection extends engine life

Bel-Ray Si-7 Full Synthetic 2T Engine Oil is a 2-stroke motorcycle oil specifically formulated for use in injector/autolube systems, but can be used as pre-mix. Formulated to reduce smoke and carbon residue while providing the highest level of protection for all 2-stroke engines. BelRay Si-7 meets the JASO FD and ISO-L-EGD ratings ensuring the highest level of detergency for better performing, longer running engines.
• Clean-burning, synthetic ester for injector/ auto-lube or pre-mix applications
• Provides a high level of protection and performance for all 2-stroke engines
• Formulated to reduce smoke and carbon residue

Bel-Ray H1-R Racing 100% Synthetic Ester 2T Engine Oil is formulated for all power valve 2-stroke engines. Advanced 100% synthetic ester base oils cling to metal, preventing wear in all 2-stroke applications. Bel-Ray H1-R Racing 100% Synthetic Ester 2T Engine Oil is clean burning to prevent carbon build-up in combustion chambers and power valve mechanisms. Not suitable for methanol fuel. 2017 CIK-FIA Certified for use in high performance racing kart applications.
• Synthetic Ester formula
• Keeps power-valves clean and responsive for increased horsepower
• Superior film strength prevents wear
• Suitable for any and all manufacturers recommended mix ratios

• CIK-FIA approved for use in racing kart engines
• Pre-mix only for air-cooled/liquid-cooled 2T power-valve engines (not for methanol fuel)
Bel-Ray Gear Saver Transmission Oil is a gear oil that has been developed for the unique demands of all motorcycle transmissions equipped with wet clutches. Bel-Ray Gear Saver Transmission Oil flows freely for better clutch cooling and provides positive clutch engagement for better starts and longer clutch life while protecting highly-loaded gears from wear, ensuring smooth shifts for more positive action.
• Formulated to protect transmission gears from wear
• Positive clutch engagement for better starts and longer clutch life
• Protects shafts, bearings and gears
• For air-cooled/liquid-cooled 2T/4T transmissions with wet clutches

Bel-Ray Thumper Gear Saver Transmission Oil is a premium transmission oil that has been developed for the unique demands of motorcycles equipped with separate engines and transmissions. Formulated with extra protection for gears and bearings subject to high torque loads of modern motorcycle transmissions. This multi-viscosity formula flows freely for better clutch cooling and provides positive clutch engagement for better starts and longer clutch life while protecting highly-loaded gears from wear, ensuring smooth shifts for more positive action.
• Formulated to protect transmission gears from wear
• Maximum clutch performance and smooth shifting
• Wear protection extends clutch life
• For 2T/4T transmissions with a wet clutch

Big Twin Transmission Oil is a multi-grade 4-stroke V-Twin transmission oil formulated for sliding contacts of gears in heavily loaded 4-stroke transmissions. It provides superior anti-wear, smooth shifting and reduces gear noise.
• Formulated for motorcycles with separate transmissions
• Wear protection extends gear life
• Quiets gear whine and improves shifting
• For Big Twin, air-cooled/liquid-cooled transmissions
API GL-5

Bel-Ray Gear Saver Hypoid Gear Oil features Bel-Ray’s state-of-the-art Extreme Pressure chemistry to give unsurpassed protection for heavily-loaded shaft drive and final drive units. Meets or exceeds API GL-4 and GL-5 requirements. Not recommended for wet clutches.
• Formulated for gearboxes and final drive units without a wet clutch
• Smoother shifting and reduced gear whine
• Extreme Pressure additives reduce component wear
• For motorcycles and ATVs (not for wet clutches)
API GL-5

Sport Transmission Fluid has been developed for the unique demands of Harley-Davidson® Sportster® V-Twin motorcycle transmissions equipped with wet clutches. Bel-Ray Sports Transmission Fluid flows freely for better clutch cooling and provides positive clutch engagement for better starts and longer clutch life while protecting highly-loaded gears from wear, ensuring smooth shifts for more positive action.
• Formulated for the transmission and primary of Sportster motorcycles and Buell® Blast™ motorcycles
• Wear protection extends transmission life
• Prevents clutch slipping and chatter for consistent engagement
• Distinctive red color for easy leak detection
• For Sportster transmissions

Primary Chaincase Lubricant is premium motorcycle oil specially formulated for the primary chaincase of all big twin motorcycles. Ideally suited to stand up to high pressures, its exclusive Bel-Ray antiwear chemistry ensures long service life for the primary chain. Superior oxidation protection for extended performance, and prevents clutch slipping and chatter for consistent engagement. Distinctive red color makes it easier to detect leaks in multiple lubrication cavity engines.
• Formulated for primary chains and wet clutches
• Wear protection extends primary chain life and protects gears from wear
• Prevents clutch slipping and chatter for consistent engagement
• Distinctive red color for easy leak detection

• For Big Twin, air-cooled/liquid-cooled for primary chaincases
Primary Chaincase Lubricant 80W 1L

Bel-Ray Moto Chill Racing Coolant is an engine coolant that uses a special non-toxic propylene glycol formula designed for better heat transfer and cooler running engines. Protects from corrosion and extends the life of all motorcycle cooling systems including those using magnesium and aluminum components. The ultimate high-performance engine coolant — especially suited for racing conditions. Do not dilute. Ready to use.
• Non-toxic, Propylene Glycol anti-freeze
• Protects aluminum and magnesium components from corrosion
• Pre-mixed, ready to use
• Compatible with all common coolants

Bel-Ray High Performance Fork Oil is a front suspension oil formulated for use in all suspension forks including those using cartridge and dual chamber systems. Through the use of carefully selected high-viscosity base oils, fade is reduced providing smooth operation over a wide temperature range.
Bel-Ray High Performance Fork Oil eliminates stiction and drag while greatly improving fork action.
• Formulated for front forks
• Reduces fade for smooth operation
• Eliminates stiction and drag, improving fork action
• Anti-wear and anti-foam

Bel-Ray Blue Tac Chain Lube is a highperformance, fully synthetic chain lube for all powersports chain applications. Developed with input from professional racing teams, Blue Tac Chain Lube offers an extremely tacky formula that will not fling off when used as directed. Professional racing teams and dyno tests have proven that even at speeds of 100 mph and up, Bel-Ray Blue Tac Chain Lube remains in place on your chain, providing the performance and protection you require. For racing kart applications, Blue Tac Chain Lube will ensure consistent power to the wheels with minimal power loss and clutch contamination during racing events. The tacky properties ensure TAG clutch hubs are protected from chain fling-off.

• Designed to resist fling-off (even in high speed applications)
• Wear and corrosion protection for long chain and sprocket life
• Sprays on blue, dries clear
• For chain applications, including ‘O’, ‘X’ and ‘Z’ ring units and roller chains
Bel-Ray Super Clean Chain Lube is an aerosol chain lube that utilizes the latest innovation in chain lubricant technology, combining unsurpassed anti-wear protection for long chain and sprocket life with an outer protective coating that will not attract dirt, sand, or grit and ABSOLUTELY WILL NOT FLING OFF when used as directed. Suitable for all ‘O’ ‘X’ and ‘Z’ ring and roller type chains for street, off-road, and racing use.
• Designed to resist fling-off (even in high speed applications)
• Protective coating dries white to ensure complete coverage
• Will not fling-off or attract dirt, sand or grit
• Wear and corrosion protection for long chain and sprocket life

• For chain applications, including ‘O’, ‘X’ and ‘Z’ ring units and roller chains
Bel-Ray Foam Filter Oil is a foam air filter oil for all street, offroad, and racing foam air filter applications. Innovative Bel-Ray technology has produced a foam filter oil unlike any other. It is easy to apply and improves airflow. Ultra-viscous formula forms an oil barrier to trap micron-sized particles that can cause engine damage. Bel-Ray’s waterproof air filter oil prevents clogging when wet.
• Designed to improve air flow
• Traps microscopic particles to extend engine life
• Waterproof formula prevents clogging when wet
• For foam air filters


Bel-Ray Waterproof Grease is the legendary high-performance, multi-purpose grease. Superior water resistance, even in salt water, will ensure continued sealing and protection. Perfect for wheel bearings, headsets, shock linkages, swing arm pivots and other motorcycle, ATV, snowmobile and marine chassis lubrication points. Due to its aluminum complex formula, it won’t melt or run out. Enhanced mechanical stability and special anti-wear additives protect and lubricate bearings for improved performance.
• Waterproof grease for all bearing and bushing applications
• Corrosion protection, even in salt water
• Wear protection extends bearing life
• Will not melt or run


Foam Filter Spray 400ml
Foam Filter Oil 1L
Bel-Ray 6 in 1 is a multi-purpose aerosol lubricant that contains anti-wear additives that provide high film strength to this exceptional penetrating and lubricating fluid. Bel-Ray 6 in 1 cleans as it lubricates, protects against rust and corrosion, displaces water, and reduces friction. Bel-Ray 6 in 1 will not harm electrical contacts, vinyl, wood or paint.
• Multi-purpose lubricant
• Cleans, lubricates, protects, displaces water, reduces friction and penetrates rust
• Safe for use on electrical contacts, vinyl, wood and paint


























Castrol POWER1 ULTIMATE is a Full Synthetic technology 4-stroke motorcycle engine oil. 5-in-1 formula delivers outstanding performance and protection. Suitable for all makes of 4-stroke bikes, both carburetor or fuel injected where JASO MA or MA2 are recommended.
Castrol POWER1 ULTIMATE’s 5-in-1 formula delivers:
• Excellent acceleration*
• Excellent protection
• Smooth riding
• Keeps the engine cool on long rides
• Enduring performance
Complies with requirements of catalyst equipped engines.
*Acceleration benefits will be subject to riding style and oil viscosity grade
API SN
JASO MA-2

Product number Product

55-4010-001 Castrol Power1 Ultimate 4T 5W-40 1 L
55-4010-004 Castrol Power1 Ultimate 4T 5W-40 4 L
55-4010-208 Castrol Power1 Ultimate 4T 5W-40 208 L
55-4000-001 Castrol Power1 Ultimate 4T 10W-50 1 L
55-4000-004 Castrol Power1 Ultimate 4T 10W-50 4 L
55-4000-208 Castrol Power1 Ultimate 4T 10W-50 208 L
Castrol MAGNATEC meets leading industry standards and matches the handbook specification for many cars, SUVs and pickup trucks. It is used by millions of mechanics around the world.
5W-30 C3
ACEA C2/C3
API SP
BMW Longlife-04
FIAT 9.55535-S3
OPEL OV 040 1547-D30/G30 Meets MB 229.31/229.51/229.52
Castrol POWER1 delivers high performance to drive you forward with a new 3-in-1 formula for 4-stroke engines. Provides superior performance and protection. Castrol POWER1's new 3-in-1 formula has been developed to deliver three key benefits.
• Excellent acceleration
• Excellent protection
• Smooth driving
10W-30 API SL
10W-40/15W-50/20W-50 API SN
JASO MA-2



55-402-001 Castrol Power 1 4T 10W-30 1 L
55-402-004 Castrol Power 1 4T 10W-30 4 L
55-402-208 Castrol Power 1 4T 10W-30 208 L
55-406-001 Castrol Power 1 4T 10W-40 1 L
55-406-004 Castrol Power 1 4T 10W-40 4 L
55-406-208 Castrol Power 1 4T 10W-40 208 L
55-408-001 Castrol Power 1 4T 15W-50 1 L
55-408-004 Castrol Power 1 4T 15W-50 4 L
55-408-208 Castrol Power 1 4T 15W-50 208 L
55-410-001 Castrol Power 1 4T 20W-50 1 L
55-410-004 Castrol Power 1 4T 20W-50 4 L
55-410-208 Castrol Power 1 4T 20W-50 208 L
5W-40 C3
ACEA C3
API SN Plus
BMW Longlife-04
Fiat 9.55535-S2 Meets MB 229.31/229.51/229.52


Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most. Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine. Suitable for use in automotive gasoline and diesel vehicles.
• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low temperature performance
0W-30 A3/B4
ACEA A3/B4
API SL
BMW Longlife-01
MB-Approval 229.3/ 229.5
Renault RN0700 / RN0710
VW 502 00/ 505 00
0W-40 A3/B4
ACEA A3/B4
API SP
BMW Longlife-01
MB-Approval 229.3/ 229.5
Renault RN0700 / RN0710
VW 502 00/ 505 00
Ford WSS-M2C937-A

























4L 55-417-004
EDGE 0W-40 A3/B4 4L
























Castrol POWER1 ULTIMATE 2T is an advanced, fully synthetic 2-stroke engine oil for use in high speed, high performance 2-stroke motorcycle engines to deliver ultimate performance. Its fastburning, high protection formula is designed to unlock the full potential of high tuned motorbike engines.

Castrol POWER1 Scooter is fully synthetic engine oil. For 2-Stroke engines Castrol POWER1 2T is a low smoke oil for modern 2T scooters. Its unique formulation protects the exhaust system from the build up of excessive carbon deposits which can lead to a drop in engine performance over time.

Castrol Power 1 2T is superior part synthetic 2-Stroke engine oil. Its unique Clean Burning Formula makes it especially suitable for use in 2 Stroke vehicles delivering long lasting performance and superior engine cleanliness.

Castrol POWER1 A747 is a low ash, part synthetic racing lubricant specially formulated for use in multi-cylinder, watercooled two-stroke engines fitted to road racing machines, where combustion chamber deposit control is essential. It also contains special additives to prevent throttle slide sticking in wet weather conditions.

75W-140 is a full synthetic final drive lubricant which is suitable for use in axles and final drives in commercial vehicles and passenger cars where API GL-5 performance is required. Included in the Scania High Performance product list and is approved against Scania STO 2:0A.
75W-140
API GL-5
Scania STO 2:0A
75W-90, formulated with Smooth Drive Technology™, is a full synthetic rear axle fluid. It provides superior protection, especially when driving under stop-start or extreme conditions. This enables smoother axle operation and noise reduction, resulting in a more comfortable drive throughout the lifetime of the vehicle.
75W-90
API GL-5
MAN 342 S1
ZF TE-ML 05A, 12B, 17B, 19C, 21A
BMW (Non-Limited Slip Rear Axles)


Castrol MTX 10W-40 is a transmission oil designed for the latest generation of 2 and 4-stroke motorcycles. Castrol MTX 10W-40 provides balanced friction properties for quick and easy shifting, long clutch life and excellent performance. API SG








API GL-5
MAN 342 M2
ZF TE-ML 05A, 12E, 16B, 17B, 19B, 21A
API GL-5
BMW LS Rear Axles
















Castrol Transmax Axle EPX 80W-90 is a multipurpose axle oil which may be used in differentials, final drives and other applications in passenger cars and commercial vehicles where API GL-5 performance is required. It is approved by MAN and ZF for use in a range of commercial applications including axles in off-road and agricultural equipment.

Castrol Transmax Limited Slip LL 75W-140, formulated with Smooth Drive Technology™ is a fully synthetic hypoid oil for conventional and limited slip differentials. Provides excellent performance in high-end vehicles equipped with limited slip differential. Approved for use in BMW M-series and Mercedes Benz AMG limited slip differentials.
MB-Approval 235.61, ZFTE-ML 05C, ZFTE-ML 16G, ZFTE-ML 18, ZFTE-ML 21C
Recommended for use in Nissan GTR limited slip rear axles








Allison TES 389
MB-Approval 236.9
Voith H55.6335.xx
















Automatic Transmission Fluid that is recommended for use in GM automatic transmissions pre-2005 (Dexron® II or III) and Ford automatic transmissions built between 1983 and 1996 (Mercon®). This product is approved for use in Allison heavy duty transmissions against TES 389 and approved for use in a wide range of European heavy duty automatic transmissions. This product replaces Castrol ATF Dex II Multivehicle
MAN 339 L1, MAN 339 V1, MAN 339 Z1
Volvo Transmission Oil 97341:071, ZF TE-ML 04D, 14A
Meets Allison C4, Ford MERCON®, GM

Castrol Transmax Universal LL 75W-90 formulated with Smooth Drive Technology™ is a full synthetic multi purpose manual transmission and final drive lubricant. It may be used in synchronised manual transmissions and final drives / differentials of a wide range of vehicles (commercial vehicle, construction equipment) where API GL-4 or API GL-5 fluids are required and it carries a number of OEM approvals.
API GL-4/GL-5/MT-1
SAE J2360
MAN 341 Z2
MAN 342 S1
MB-Approval 235.8
Scania STO 1:0
ZF TE-ML 02B, 05A, 12L, 12N, 16F, 17B, 19C, 21A
Eaton Europe




Castrol Brake Fluid DOT 4 is a synthetic brake fluid comprising of glycols and borate esters to achieve a higher boiling point and wet boiling point.
JIS K2233, SAE J1703, SAE J1704, ISO 4925 Class 4,
FWVSS DOT 4

Castrol React Performance DOT 4 is a high boiling synthetic brake fluid which far exceeds the requirements of the SAE J1704, FMVSS 116 DOT 3 and DOT 4, ISO 4925 and JIS K2233 specifications. This product has been formulated from mixed polyalkylene glycol ethers and borate ester together with other high performance additives and inhibitors which give ultimate system protection against the effects of corrosion and high temperature vapour lock. Castrol React Performance DOT 4 brake fluid is designed for use in all brake systems particularly those which are exposed to extreme conditions such as high performance vehicles and race conditions.
SAE J1703 & J1704
FMVSS 116 DOT 4
JIS K2233
ISO 4925 Class 4

Castrol React SRF Racing is a high performance brake fluid of special value in competitive motor sport where extreme braking conditions are encountered. Castrol React SRF Racing has an exceptionally high dry boiling point making it ideal for use under arduous braking conditions such as racing or rallying.
FMVSS 116 DOT 3
FMVSS 116 DOT 4
ISO 4925 Class 4
SAE J1703
JASO JIS K2233 Class 4






ASTM D3306; BS 6580:2010;












Castrol Chain Spray O-R is a white, fully synthetic chain lubricant for motorcycle O-ring and X-ring chains. It protects against corrosion and aggressive environmental influences and reduces frictional properties for maximised power output and wear protection.
Castrol Radicool is a concentrated engine coolant for use in both petrol and diesel engines with aluminium or cast iron engines. This coolant can be mixed using 33% concentration with purified water to give frost protection to -18 deg C, however it is recommended to use a 50% dilution to provide optimum corrosion protection and freeze protection down to -36 deg C. At these concentrations this coolant will provides year round protection. To maintain optimum performance this product should be replaced after 1 year












SHOGUN is a 100% synthetic 4-stroke motorcycle engine oil made exclusively of high quality polyalphaolefins (PAOs), esters and additives.
THE ULTIMATE PERFORMANCE
The most advanced, high-performing 4-stroke engine oil. Formulated with 100% PAO & Ester technology, it delivers maximum protection under the most extreme conditions. SHOGUN is made for riders who demand nothing but the best on the road and the track.
• Exceptional performance
• Maximum engine protection
• For track and road use
• Ideal for Race bikes
• Used in the Red Bull Rookies Cup
JASO MA2, API SP






SHOGUN OFF-ROAD is a 100% synthetic 4-stroke motorcycle engine oil made exclusively of high quality polyalphaolefins (PAOs), esters and additives.
THE ULTIMATE PERFORMANCE
The most advanced, high-performing 4-stroke engine oil. Formulated with 100% PAO & Ester technology, it delivers maximum protection under the most extreme conditions. SHOGUN is made for riders who demand nothing but the best.
• Exceptional performance
• Maximum engine protection
• Off-road use
• Ideal for 4-stroke MX/Enduro bikes




KATANA is a 100% synthetic 4-stroke motorcycle engine oil made of high-quality polyalphaolefins (PAOs), esters and additives. It offers excellent protection even at full power and guarantees the best engine efficiency at high revs. Ideal for roadsters, trail bikes and sporty GTs, it promotes sharper revs and smooth, fast gear changes.
• Smooth and pleasant gearbox
• Smooth and faster gear changes
• Maximum engine performance at very high speeds
• Engine protection even at full power
JASO MA2, API SP


55-1264-001 Ipone Katana 10W-40 1L
55-1264-004 Ipone Katana 10W-40 4L
55-1265-001 Ipone Katana 10W-50 1L
55-1265-004 Ipone Katana 10W-50 4L
KATANA ATV is a 100% synthetic 4-stroke engine oil made of high-quality polyalphaolefins (PAOs), esters and additives. Specially formulated for 4-stroke ATV/UTV/quads approved for road or off-road use. It provides the best performance and maximum protection of the engine. Anticorrosion and anti-oxidation, it is resistant to extreme off-road conditions.
• Best engine performance
• Engine protection
• Anti-corrosion and antioxidation
• Resistance to extreme offroad conditions
• Ultra practical pouring spout
JASO MA2, API SP

KATANA OFF-ROAD is a 100% synthetic 4-stroke motorcycle engine oil made of high-quality polyalphaolefins (PAOs), esters and additives. Designed to offer very high off-road performance, it guarantees maximum protection under heavy load and excellent clutch control. Ideal for cross, enduro and enduro trail bikes, it promotes sharper revs and smooth, fast gear changes.
• Quicker revs
• Fast and precise gear shifts
• Resistance to intensive clutch loads
• Tested and approved at the Touquet Enduropale



55-206-001
Ipone Katana OFF-ROAD 10W-40 1L
55-207-001 Ipone Katana OFF-ROAD 10W-50 1L
55-194-001 Ipone Katana OFF-ROAD 10W-60 1L
55-194-004 Ipone Katana OFF-ROAD 10W-60 4L
The 100% synthetic engine oil for 4-stroke scooters and maxiscooters.
Guarantees best engine performance for scooters and maxi scooters. It ensures optimum lubrication and offers maximum protection and longevity of the engine and gearbox. Its FUEL ECO formula allows you to save petrol.
• Best engine performances
• Fuel economy
• Engine protection
JASO MB, API SM






R4000 is a semi-synthetic+ 4-stroke motorcycle engine oil made of high-quality esters and additives. Designed to provide longlasting engine protection, it extends engine life and reduces oil consumption. It is suitable for all engine sizes and is the ideal choice for riders looking for a reliable, high-performance solution for their bike.
• Optimum engine and gearbox protection
• Wear resistance
• Anti-corrosion and anti-oxidation
• Can with pouring spout for precise dosing


R4000 ATV is a semi-synthetic+ 4-stroke quad and SSV engine oil made of high-quality esters and additives. Designed to provide long- lasting engine protection, it extends engine life and reduces oil consumption. It is the ideal choice for those looking for a reliable, high-performance solution for their ATVs. Specially developed for 4-stroke ATV's in agricultural and utility uses.
• Optimum lubrication
• Engine protection
• Anti-corrosion and anti-oxidation
• Ultra practical pouring spout
JASO MA2, API SP

Product number Product
55-110-001 Ipone R4000 ATV 10W-40 1L
55-110-004 Ipone R4000 ATV 10W-40 4L
10.3 / 10.4 / 15.5 / 20.5
The semi-synthetic motor oil for 4-stroke road motorcycles
• Great price/quality ratio
• Wear resistance
• Optimum lubrication
Ideally suited for 4-stroke road or dual-sport motorcycles, with wet or dry clutch.
JASO MA2, API SL
R4000 SCOOT is a semi-synthetic+ 4-stroke scooter engine oil made of high-quality additives. Designed to provide longlasting engine protection, it extends engine life and reduces oil consumption. It is suitable for all engine sizes and is the ideal choice for riders looking for a reliable, high-performance solution for their scooter.
• Fuel economy
• Engine protection
JASO MB, API SL





55-120-004
10.4 10W-40 4L 55-120-220 Ipone 10.4 10W-40 220L 55-122-001
15.5 15W-50 1L 55-123-001

Specially designed to meet the requirements of mountain driving, it protects the engine from negative temperatures up to -45°C. Intended for sports and competition use, it protects the engine at high speeds.
It is suitable for 2-stroke air-cooled or liquidcooled engines, with or without exhaust valves as well as for modern injection systems such as E-TEC.
• Protection of the engine at high speeds
• Meets the requirements of high altitude mountain driving
• Anti-smoke formula
• Strawberry scent
JASO FD, API TC
Product number Product 55-1000-001 Ipone R2000 Snow 1L

SHOGUN 2R is a 100% synthetic racing engine oil, specially developed for highperformance 2-stroke racing engines running at high speeds and under heavy loads, lubricated by mixing. Tested in the most demanding competition environments and adapted to extreme conditions, it guarantees full engine power, flexible and fast gear changes and offers unparalleled performance.
To mix yourself, it is suitable for both aircooled and water-cooled engines, for all fuels leaded and unleaded.

• Guarantees full engine power and unmatched performances
• Engine protection
• For competitions: cross, enduro, trial
• Practical dosing bottle
Compliant with the API TC standard, its quality is superior to the requirements of the current JASO specifications.
KATANA SNOW is a 100% synthetic 4-stroke snowmobile engine oil made of high-quality polyalphaolefins (PAOs), esters and additives.
Designed to meet extreme weather conditions. It offers you an easy and fast start thanks to its 0W cold viscosity grade, ideal when dealing with negative temperatures.
Its formulation allows a reduction in oil consumption and a gain in power thanks to a reduction of friction and shear resistance.
It guarantees seamless operation up to -45°C and meets the requirements of high-altitude mountain driving with optimum engine protection at high speeds.
• Power gain and engine performance optimization
• Meets the requirements of high altitude mountain driving
• Easy and quick starts
• Reduced oil consumption
55-1000-004 Ipone R2000 Snow 4L 55-1000-220 Ipone R2000 Snow 220L Product number Product 55-104-004 Ipone Katana Snow 0W40 4L

Product number Product
55-130-001
Ipone SHOGUN 2R (racing) 1L
SAMOURAI is THE reference in matters of 2-Stroke motor oil. Its reputation is no longer to be made, everyone knows it and wants it!
• Resistance to heavy loads
• Engine protection at very high speeds
• Reduction in smoke emissions
• 100% Synthetic with ESTER
• Competition/Road/Off-Road
• Practical dosing canister
API TC
Product number Product
55-131-001
55-132-001

Ipone Samourai 2T 1L
Ipone Samourai strawberry 2T 1L

Semi-synthetic (plus) engine oil for 2-stroke road bikes. Perfectly suited for a 2-stroke motorcycle ride in the city.
• Compatible mixing and injection systems
• Reduction of smoke emissions
• Perfect lubrication, better engine performance
• Better start-ups

Ensures optimum lubrication of 2-stroke scooters and helps to limit smoke emissions and reduce noise. Semi-synthetic +, it guarantees good protection of the engine.
• Compatible mixing and injection
• Noise and smoke emissions reduction
• Ultra practical pouring spout

Because SELF OIL is a gardener’s friend! It is suitable for lawn mowers, chainsaws, hedge trimmers, brush cutters and other 2-stroke motor-powered cultivators.
• Semi-Synthetic
• Optimum lubrication
• Engine protection
• Practical dosing canister




Specially designed for hydraulic braking systems of racing motorcycles.
Ensures thermal stability and maintains braking power and efficiency even in extreme conditions. You will be able to take the turn at the end of a straight line with confidence!
It provides excellent protection to the entire brake system (hoses, caliper seals, front and rear master cylinders and brake lines) and extends its lifespan.
• Extremely high dry boiling point: 328°C
• Maintains braking power and effectiveness

BRAKE DOT 5.1 ensures perfect and safe braking thanks to its 270° dry boiling point. It ensures effective and precise braking without altering your feeling on brake levers.
After a brake fluid purge, you will retrieve sharp brakes, whether it be for regular use or during more sporty rides.
• Dry boiling point: 270°C
• Recommended for hydraulic braking systems
• Compatible with ABS breaking systems
• Compatible Dot 4, 5.1
• 100% synthetic

• Developed in partnership with the Red Bull MotoGP Rookies Cup
• Compatible with Dot 4
• 100% synthetic



Road and off-road use
• FORK 5 was developed for soft forks

• FORK 10 was developed for medium forks
• FORK 15 was developed for medium/hard forks
• FORK 20 was developed for hard forks
• No more noises and clicking
• Handling is significantly improved
• Maintains its performance at all temperatures
• Protection against wear and corrosion
100% synthetic grade 3 competition fork oil. Was specially developed for inverted telescopic forks subject to very high demands in competition: track, cross and enduro. Compatible with all fork brands, FORK FLUID 3 extends the life of your suspension!
• Maintains its performance at all temperatures
• Protection against wear and corrosion
• Facilitates slippage, reduces internal friction
• Stability and constant damping effect
• Its can with pouring spout is very convenient for a precise dosage

The semi-synthetic competition oil for shock absorbers, grade: 3.
Specially formulated for shock absorbers subject to high competitive demands.
• Perfect stability of the suspension and damping consistency
• Facilitates slippage and limits jolts
• Anti-corrosion and anti-oxidation
• Developed in partnership with the Red Bull MotoGP Rookies Cup


Semi-synthetic (plus), ester-based lubricant for separate gearboxes with a wet clutch. IPONE has selected the best synthetic bases and additives to guarantee optimum protection for your gearbox and exeptional resistance to shearing.
• Easy and crackless gear shifts
• Prevents sticking and slipping of the clutch
• Facilitates cold starts
• Gearbox protection

80W90 - Mineral
80W140 - Synthetic plus The cardan shaft and axle oil. Ensures a perfect lubrication and an optimum protection of mechanical parts such as cardan shafts and rear wheel bearings.
• Reduces jolts during gear shifts
• Reduces mechanical noise
• Resistance to high loads
• Extreme pressure additives
GL5


Specially designed for 2-stroke motorcycles in competition, track and off-road use. Tested and approved in the most extreme races and environments, in which the gearbox and the clutch of 2-stroke motorcycles are subjected to very strong demands on track or in off-road use.
• Reduces the risk of slipping
• Developed in partnership with the Red Bull MotoGP Rookies Cup
• Recommended for wet or dry clutches
• 100% synthetic

Mineral
Extreme pressure additivies API GL5
• Optimum lubrication
• Extends the life of the gears
• Compatible with seals

Mineral-based transmission oil for motorcycle and ATV use.
Perfect for automatic motorcycle transmissions but also for power steering, atv differential and axles.
• Certified to the Dexron IID standard
• Optimum lubrication
• Shear resistance
• Maximum protection

Ready to use coolant.
• Allows you to save up to 5° C on your engine temperature
• Anti-freeze protection
• Removes deposits
• Blue colour


• The ultimate chain grease for road motorcycles.
• Long-lasting performance (800km) in extreme conditions
• Zero projection
• Visible at application
• Multi-position diffuser with retractable rod
• O-X-Z ring compatible

Because in this pack you have everything you need for a complete maintenance of your chain!
• 1 road chain grease 750ml
• 1 chain cleaner 750ml
• 1 chain brush

Chain grease specially developed to withstand extreme conditions in cross and enduro.
• Resistant to water, sand, mud, soil
• Non-stick formulation
• Zero projection
• O-X-Z ring compatible

Because in this pack you have everything you need for a complete maintenance of your chain!
• 1 off road chain grease 750ml
• 1 chain cleaner 750ml
• 1 chain brush

• Red / Blue / White coloured chain grease
• Water resistant
• Anti-corrosion



Because CHAIN CLEANER is THE ultimate chain degreaser that cleans and makes your chain shine like it's brand-new.
• Powerful and precise spray
• Powerful chain degreaser, effective against the most stubborn greases
• Multi-position diffuser with retractable rod
• Compatible with O-rings


Facilitates starts after long periods of inactivity of the engine as over wintering.
• Conserves fuel for 2 years
• Preserves the properties of gasoline
• Practical dosing bottle
• Reduces maintenance cos


For foam air filters Keeps the dirt in the filter so that it doesn't go into your engine.
• Holds water, mud, dust and sand
• Boost your engine power
• Wide and homogeneous spraying
• Blue colour
• Powerful carburettor degreaser
• Improves power recovery
• Reduces exhaust smoke emissions
• Reduce your fuel consumption
• Powerful and precise spraying

Degreaser for foam air filters. Removes impurities from your filter to give your engine maximum power.
• Cleans and degreases effectively
• Does not damage filters
• Easy application


Makes starting easier and restores the original performance of your bike.
• Eliminates deposits in the injection system
• Better engine torque at acceleration
• Reduces exhaust smoke emissions
• Limits oil and fuel consumption


• Powerful degreaser
• Removes dust from the brake and clutch system
• Prevents brake squeal
• Extends the service life of brake discs and pads
• Dries quickly without leaving any residue

Water resistant (evel salted!) mechanical grease
• Prevents breakage and oxidation of parts
• Perfect for bearings, joints, axes and other pivots
• Good adhesion to moving parts
• Durability and efficiency over time

Puncture-proof spray. S.O.S TYRE repairs and reinflates your tyre in 10 seconds.
• Compatible with all types of tyres
• Convenient portable format

• Silicone based plastic renovator
• Renovates dull plastics
• Without damaging plastics
• Without traces or greasy layer




A complete kit to clean every surface of your bike!
• Deep clean with MOTO WASH 1L
• Rims like new with WHEEL CLEANER 1L
• Two accessories designed to make cleaning easier; 1 wash mitt & 1 wheel brush
Multi-purpose universal lubricant. Removes moisture from electrical components, removes rusted parts and lubricates handles, cables and chains. Great after washing. Good pressure!

• Multi-surface cleaning wax
• Effortlessly cleans and polishes
• Leaves no traces or greasy finish
• To be used without water with a microfibre wipe
• Removes micro-scratches


Because a true rider never hits the road without the essentials: the must-have survival kit for every motorcycle adventure.


• Pouch - Allows you to carry this biker survival kit anywhere
• Microfibre wipe - 30x50cm To be used with HELMET'OUT
• HELMET'OUT - An exterior helmet/visor cleaner 100ml
• X-TREM CHAIN ROAD - Road chain grease 100ml
• S.O.S TYRE - Puncture repair spray 200ml
Ipone Road Trip Kit

Nourishing cream for leather care.
• Suitable for all types of leather (jackets, boots, gloves, saddle and luggage)
• Effective against encrusted insects
• The cream has a good hold and does not drip
• Practical format, opens with a simple thumb push

Effective rain repellent for visor and bubble
• Disperses water instantly and improves your visibility for greater safety.
• Tested in extreme rain conditions
• Does not leave traces

Allows you to completely clean your helmet. Practical transportable format, can be put under the saddle
• 1 helmet exterior cleaner
• 1 helmet interior cleaner
• 1 rain repellent
• 1 microfibre wipe

Eliminates all the dirt and insects encrusted on your helmet and visor.
• Efficient on glossy and matt paints
• Does not drip
• Does not leave traces
• Practical transportable format



This oil, acid and fuel resistant plastic jug makes it possible to fill even the hardest-to-reach tanks without spilling its contents.
This graduated dispenser is the essential utensil to make all your mixes.

Manual, for 60 & 220 liter.




Fully synthetic high-performance 4-stroke engine oil, specially developed for demanding use in hypersport motorcycles with powerful engines. These lubrications provide engines, gearboxes and clutches with optimum protection over the entire range of applications.
• aggressive power development
• optimum wear protection
• ideal for wet multi-disc clutches (JASO MA2 approval)
SAE 5W/40 JASO MA2 T903: 2011; API SN, SM, SL
SAE 10W/50 JASO MA2 T903: 2011; API SN, SM, SL
SAE 10W/60 JASO MA2 T903: 2006; API SJ, SH, SG

Product number Product

552-166-001 Motorex Power Synt 4T 5W/40 1 ltr (10)
552-166-004 Motorex Power Synt 4T 5W/40 4 ltr (4)
552-169-001 Motorex Power Synt 4T 10W/50 1 ltr (10)
552-169-004 Motorex Power Synt 4T 10W/50 4 ltr (4)
552-169-020 Motorex Power Synt 4T 10W/50 20 ltr
552-169-060 Motorex Power Synt 4T 10W/50 60 ltr
552-169-200 Motorex Power Synt 4T 10W/50 200 ltr
552-172-001 Motorex Power Synt 4T 10W/60 1 ltr (10)
552-172-004 Motorex Power Synt 4T 10W/60 4 ltr (4)
552-172-060 Motorex Power Synt 4T 10W/60 60 ltr
Fully synthetic high-performance 4-stroke engine oil, especially developed for Off-Road motorcycles. When this oil was developed, in close cooperation with racing teams and motorcycle manufacturers, attention was paid to the specific requirements of Off-Road use.
• racing quality
• extremely good thermal and shear stability
• ideal for wet multi-disc clutches (JASO MA2 approval)
SAE 5W/40 JASO MA2 T903: 2011; API SN, SM, SL
SAE 10W/50 JASO MA2 T903: 2011; API SN, SM, SL
SAE 10W/60 JASO MA2 T903: 2006; API SL, SJ, SH, SG; KTM LC4 2007+


552-142-001 Motorex Cross Power 4T 5W/40 1 ltr (10)
552-142-004 Motorex Cross Power 4T 5W/40 4 ltr (4)
552-145-001 Motorex Cross Power 4T 10W/50 1 ltr (10)
552-145-004 Motorex Cross Power 4T 10W/50
552-145-020
552-148-001
552-148-004
552-148-020

Synthetic high-performance engine oil, specifically for use in watercooled boxer engines. Guarantees a stable lubricating film and a constantly high oil pressure under all operating conditions and lowers the friction in the engine significantly.
• ideal for water/oil-cooled engines
• reduces oil consumption
• developed in close cooperation
JASO MA2 T903: 2011; API SN, SM, SL

Modern synthetic high-performance engine oil for 4-stroke motorcycles. With this MC (Molecular Converted) technology highquality base oils are refined chemically and achieve a very high level of performance. Meets BMW requirements for the K1200, K1300 and K1600 Series plus the S1000 Series.
• excellent wear protection
• lowers oil consumption
• ideal for wet multi-disc clutches
(JASO MA2 approval)
SAE 5W/40 JASO MA2 T 903: 2016; API SL, SJ, SH, SG
SAE 10W/30 JASO MA2 T903: 2011; API SN, SM, SL
SAE 10W/40 JASO MA2 T903: 2011; API SN, SM, SL
SAE 15W/50 JASO MA2 T903: 2011; API SN, SM, SL

Synthetic high-performance engine oil, specifically for use in 4-stroke boxer engines. Guarantees a stable lubricating film and a constantly high oil pressure under all operating conditions and lowers the friction in the engine significantly.
• ideal for air/oil-cooled engines
• reduces oil consumption
• developed in close cooperation with the BMW tuner AC SCHNITZER
JASO MA T903: 2006; API SL, SJ, SH, SG

552-139-001

552-190-001 Motorex Top Speed 4T 5W/40 1 ltr (10)
552-190-004 Motorex Top Speed 4T 5W/40 4 ltr (4)
552-190-200 Motorex Top Speed 4T 5W/40 200 ltr
552-193-001 Motorex Top Speed 4T 10W/30 1 ltr (10)
552-193-004 Motorex Top Speed 4T 10W/30 4 ltr (4)
552-196-001 Motorex Top Speed 4T 10W/40 1 ltr (10)
552-196-004 Motorex Top Speed 4T 10W/40 4 ltr (4)
552-196-020 Motorex Top Speed 4T 10W/40 20 ltr
552-196-060 Motorex Top Speed 4T 10W/40 60 ltr
552-196-200 Motorex Top Speed 4T 10W/40 200 ltr
552-199-001 Motorex Top Speed 4T 15W/50 1 ltr (10)
552-199-004 Motorex Top Speed 4T 15W/50 4 ltr (4)
552-199-020 Motorex Top Speed 4T 15W/50 20 ltr
552-199-060 Motorex Top Speed 4T 15W/50 60 ltr
Modern synthetic quality engine oil for 4-stroke motorcycles. They provide theengine, gearbox and clutch with goodprotection in all areas.
• good wear protection
• resistance at all temperatures
• for wet multi-disc clutches(JASO MA 2approval)
SAE 10W/40 JASO MA2 T903: 2016; API SL, SJ, SH, SG
SAE 15W/50 JASO MA2 T903: 2016; API SL, SJ, SH, SG
SAE 20W/50 JASO MA2 T903: 2016; API SL, SJ, SH, SG


552-151-001 Motorex Formula 4T 10W/40 1 ltr (10)
552-151-004 Motorex Formula 4T 10W/40 4 ltr (4)
552-151-020 Motorex Formula 4T 10W/40 20 ltr
552-151-060 Motorex Formula 4T 10W/40 60 ltr
552-151-200 Motorex Formula 4T 10W/40 200 ltr
552-154-001 Motorex Formula 4T 15W/50 1 ltr (10)
552-154-004 Motorex Formula 4T 15W/50 4 ltr (4)
552-154-020 Motorex Formula 4T 15W/50 20 ltr
552-154-060 Motorex Formula 4T 15W/50 60 ltr
552-154-200 Motorex Formula 4T 15W/50 200 ltr
Modern synthetic quality engine oil for 4-stroke ATV/Quads. This oil provides goodshear stability and very rapid lubrication,including at low temperatures.
• excellent wear protection
• very good cold starting characteristics
• for wet multi-disc clutches (JASO MA2 approval)
JASO MA2 T903: 2016; API SL, SJ, SH, SG

High-quality mineral-oil-based engine oil for 4-stroke motorcycles with separate engineand gearbox lubrication. Thanks to theselection of base oils and additives specially adapted for this engine type, this engineoil provides optimum protection againstwear and high temperature stability.
• high thermal stability
• optimum oil film, even at hightemperatures
• ideal for high-capacity two-cylinderengines
API SJ, SG/CF; ACEA A3/B3

MOTOREX FOUR STROKE 4T is a synthetic shearstable engine oil (synthetic blend) that is also suitable for engines with wet clutches.
• Stable lubricating film
• Temperature stable
• Shear stable (Stay-in-Grade)
JASO MA2, API SG, SH, SJ, SL

PERFORMANCE LEVEL
POWER SYNT 5W/40
POWER SYNT 10W/50
POWER SYNT 10W/60
CROSS POWER 5W/40
CROSS POWER 10W/50
CROSS POWER 10W/60
ATV QUAD RACING 10W/50
SCOOTER FORZA 0W/30
SCOOTER FORZA 5W/40
PERFORMANCE LEVEL
TOP SPEED 5W/40
TOP SPEED 10W/30
TOP SPEED 10W/40
TOP SPEED 15W/50
PERFORMANCE LEVEL
FORMULA 10W/40
FORMULA 15W/50
FORMULA HD 20W/50
• JASO MA2 SN, SM, SL
• • JASO MA2 SN, SM, SL
• JASO MA2 SJ, SH, SG
• JASO MA2 SN, SM, SL
• JASO MA2 SN, SM, SL
• JASO MA2 SL, SJ, SH, SG
• JASO MA SN, SM, SL
• VW-NORM
• SN, SM, SL
• JASO MA2 SN, SM, SL
• JASO MA2 SN, SM, SL
• JASO MA2 SN, SM, SL
• JASO MA2 SN, SM, SL
• • JASO MA2 SL, SJ, SH, SG
JASO MA2 SL, SJ, SH, SG
JASO MA2 SL, SJ, SH, SG ATV QUAD 10W/40
JASO
SCOOTER 5W/30
SCOOTER 10W/30
SCOOTER 10W/40
PERFORMANCE LEVEL LEGEND 20W/50
PERFORMANCE LEVEL
KTM RACING 20W/60
BOXER 5W/40
BOXER 15W/50
PERFORMANCE LEVEL
RACING PRO 4T 0W/40
RACING PRO 4T 5W/30
RACING PRO 4T CROSS 10W/40
RACING PRO 4T 15W/50
SJ, SG/CF

Fully synthetic high-performance engine oil for 2-stroke supersport motorcycles. This lubricant offers optimum performance and maximum protection as well as extremely clean combustion.
• optimum protection against wear
• low-smoke formula
• for pre-mix and separate lubrication
JASO FD, API TC, ISO-L-EGD

Product number
552-106-001 Motorex Power Synt 2T 1 ltr (10)
Modern synthetic engine oil for 2-stroke motorcycles. It offers the engine good protection in all areas of use.
• minimal combustion residues
• especially low smoke
• for pre-mix and separate lubrication
JASO FC, API TC, ISO-L-EGC

Fully synthetic high-performance engine oil for 2-stroke Off-Road motorcycles. When this oil was developed – in direct cooperation with racing teams and motorcycle manufacturers – special attention was paid to the specific demands of OffRoad use.
• racing quality
• reduces combustion residues
• for pre-mix and separate lubrication
API TC, ISO-L-EGD, Safety + Performance: JASO FD
Product number Product

552-100-001 Motorex Cross Power 2T 1 ltr (10)
552-100-004 Motorex Cross Power 2T 4 ltr (4)
TWO STROKE 2T is a modern semisynthetic engine oil for all 2-stroke off-road motorcycles.
• Low smoke and combustion residue
• For pre-mix and separate lubrication
JASO FC, API TC, ISO-L-EGC
Product number Product
552-115-001 Motorex 2-Stroke 1 ltr (12) Product number
552-103-001 Motorex Formula 2T 1 ltr (10)
Synthetic 2-stroke engine oil for scooters. Points taken into special account during its development were the specific demands placed on scooters in daily use, with frequent cold starts and high operating temperatures.
• low-smoke formula
• ideal for stop-and-go traffic
• for pre-mix and separate lubrication
JASO FC, API TC, ISO-L-EGC

Product number
552-109-001 Motorex Scooter 2T 1 ltr (10)
552-109-004 Motorex Scooter 2T 4 ltr (4)

High-performance gear oil. Extremely good resistance to pressure. For separately lubricated gearboxes and clutches. Is highly efficient against clutch wear.
• Synthetic (Synthetic Performance) with MC technology
• Developed and used by MOTOREX Racing Support
• Tested under the most extreme racing conditions

number
552-229-001 Motorex Racing Gear Oil 10W/40 1 ltr (12)
A fully synthetic transmission oil designed for the specific requirements seen on trial motorcycles. In trial motorcycles, the clutch and transmission are put under particularly high stress.
• Specially developed for trial motorcycles in collaboration with GasGas
• Particularly sensitive and smooth response behaviour on the clutch
• Perfect clutch separation
GL-4

Synthetic performance. Especially suitable for gears of two-stroke motorbikes equipped with wet clutches as well as for all motorbikes with separate gear lubrication. First-class base oils and cutting-edge additives ensure optimum lubrication and shiftability.
• Excellent shiftability at all temperatures
• First-class corrosion protection
• Markedly powerful foam inhibition
API GL-4
552-333-001
552-333-004
552-333-020

Oil 10W/30 1 ltr (10)
Gear Oil 10W/30 4 ltr (4)
Gear Oil 10W/30 20 ltr
Fully synthetic, high-performance gear oil. The high-quality base oils and specially coordinated additives guarantee high thermal stability. Has critical reserves even under extreme loads.
SAE 75W/90:
API GL-5, Safety + Performance: ZF TE-ML-05B; -07A; -08; -12B; MB 235.8; MAN 342 S1; SCANIA STO 1:0; VOLVO 97312
SAE 75W/140:
API GL-5, Safety + Performance: ZF TE-ML-05B; -07A; -08; -12B; VOLVO 97312; SCANIA STO 1:0

552-346-001 Motorex Penta Ls 75W/90 Gl-5 1ltr (10) 552-347-001 Motorex Penta Ls 75W/140 Gl5 1ltr (10)
ATF DEXRON III is a versatile, highperformance ATF, which meets the high requirements of the General Motors DEXRON III H specification.
• Protection against wear and corrosion
• High shear stability
• Excellent low-temperature properties
API GL 4+5
DEXRON III H; ALLISON C4; CATERPILLAR TO-2.; MERCON; VOITH H55.6335.xx; ZF TE-ML-05L; ZF TE-ML-21L
Safety + Performance: LT 71141; MB 236.1; MB 236.6; MB 236.7; MB 236.10; MB 236.11; VW TL 521 62; VW TL 529 90; ZF TE-ML-03D; ZF TE-ML-04D; ZF TE-ML-09; ZF TE-ML-11A; ZF TE-ML-11B; ZF TE-ML-14A; ZF TE-ML-17C

Special synthetic gear oil. Provides an excellent gear-changing performance. For motorcycles with separately lubricated gearboxes and for universal joint transmissions and hypoid gears.
• Optimum protection against wear
• Excellent oxidation and shear stability
• Excellent viscosity / temperature behaviour
API GL-4/5
Safety + Performance: ZF TE-ML-07A; ZF TE-ML-08

High-pressure gear oil that can be used wherever very high levels of stress occur, such as in cardan joints, hypoid gears etc.
• Extreme loading capacity at all temperatures
• Excellent water separation
• Excellent corrosion protection
API GL-5
MAN 342 M1; MAN 342 M2; ZF TE-ML-17B; ZF TE-ML-19B; ZF TE-ML-21A; ZF TE-ML-05A; ZF TE-ML-07A; ZF TE-ML-08; ZF TE-ML-12E; ZF TEML-16B; ZF TE-ML-16C
Safety + Performance: VOLVO 1273.10; VOLVO 97310

552-339-001
552-339-004
552-339-025
Semi-synthetic, special gear oil for scooters. Ideal for continuous drives. Optimum coefficient of friction.
• Superior load-carrying capacity
• Highly comfortable shifting across the entire temperature range
• Excellent wear protection

552-345-0001
SNOWMOBILE ADVENTURE 2T is a semi-synthetic, two-stroke snowmobile motor oil. Thanks to its innovative formula, the product offers outstandingly good wear protection and ensures low-residue combustion.
JASO FD; ISO-L-EGD; API TC; ROTAX 253 Performance Level


SNOWMOBILE POLAR SYNT 4T SAE 0W/40 is a fully synthetic, high-performance special oil specifically developed for use in snowmobiles. It exhibits extremely good temperature resistance and shear strength, thereby effectively reducing engine wear.
API SM; SL; SJ


SNOWMOBILE POLAR SYNT 2T is a fully synthetic, two-stroke snowmobile motor oil. This two-stroke motor oil offers outstanding wear protection and also ensures residue-free combustion under the most extreme temperature conditions.
JASO FD; ISO-L-EGD; API TC; ROTAX 253 Performance Level


High-performance brake fluid. Thanks to its extremely high wet and dry boiling points, the product is ideal for use in racing.
• Exceptionally high wet boiling point
• Tested and proven under the most extreme racing conditions
• Can be used without any problems in all ABS and ADS systems where a DOT 4 brake fluid is required
FMVSS 116 DOT 4
ISO 4925 CLASS 4
SAE J1703/J1704

Coolant based on ethylene glycol provides excellent protection for all modern engines but particularly aluminium engines operating under high loads. Free of silicates, nitrates, amines and phosphates (OAT technology). Colour pink.
BRAKE FLUID DOT 4 is a state-of-the-art premium brake fluid known for its excellent quality and high performance.
• Biodegradable
• High wet boiling point
• Borate- and ester-free
• Extreme safety reserve against vapour lock
• Can be mixed with all brake fluids with the same specifications
• Specially suited to state-of-the-art ABS and ADS systems
FMVSS 116 DOT 4
ISO 4925 CLASS 4
SAE J1703/J1704
552-371-0002
552-403-001


552-403-004
552-403-020

Red colour
Red colour
Coolant based on ethylene glycol. It meets the strictest requirements of various manufacturers. Free of nitrates, amines and phosphates. Colour turquoise. Available as concentrate or as ready to use. (HYBRID-Technology) Product
BRAKE FLUID DOT 5.1 is a brake fluid for hydraulic brake and clutch systems with a boiling point of at least 260 °C and an extremely high wet boiling point of at least 180 °C.
• Increases safety reserve against vapour lock
• Suitable for ABS, ASR and ESP
• Ensures optimum brake performance and excellent response behaviour
FMVSS 116 DOT 5.1
ISO 4925 CLASS 5.1
SAE J1703/J1704


552-409-001
552-409-004
552-409-020

green/blue colour
(4) green/blue colour
colour
Extremely effective chain degreaser, for all types of motorcycles. Tested for O-rings, X-rings and Z-rings. Effective removal ofencrusted oil and grease deposits, etc.Regular use considerably extends theworking life of the chain kit! Finally spraywith MOTOREX CHAINLUBE.
• Highly effective cleaning
• Reduces chain wear
• Easy application

Fully synthetic chain lubricant. Especially formulated for off-road motorcycles. Tested for O-rings, X-rings and Z-rings. Excellent lubricating properties, deep penetration, resistant to water. Extends the working life of the chain kit.
• Centrifuge-resistant
• Water-resistant
• Thermostable

White high-performance chain lubricant containing PTFE. Ideal for sports and racing motorcycles. Tested for O-rings, X-rings and Z-rings. Reduces wear, extremely good adhesion. Extends the working life of the chain kit.
• Water-resistant
• Wear-reducing effect
• Thermostable

White chain lubricant specifically adapted to the requirements of modern travel enduro bikes. Excellent running performance with low dirt and dust attraction. O-ring and X-ring tested. Extremely resistant to high pressure with ultra-adhesive lubricating film.
• Water-resistant, extremely adhesive lubricating film
• O-ring and X-ring tested
• Low dirt adhesion

White chain lubricant. Especially formulated for road-going motorcycles. Tested for O-rings, X-rings and Z-rings. Extremely good adhesion, resistant to water. Extends the working life of the chain kit.
• Centrifuge-resistant
• Water-resistant
• Thermostable

Biodegradable, fully synthetic oil wax- based lubricant. Penetrates faster and forms a homogeneous surface that protects the chain against dirt and dust. This lubricant provides enhanced lubrication combined with outstanding protection against corrosion and wear and reduces abrasion. Ideal for lubrication in dry, dusty conditions.
• Biodegrades quickly
• Free of heavy metals
• Excellent dirt and dust resistance

RACING FORK OIL with the new «3D RESPONSE TECHNOLOGY». The technology enables a new innovative damping behavior by the special molecular structure. This means that tractive and impact forces are no longer diverted along a zig-zag path like an accordion, but through a multi-level grid structure instead. The three-dimensional structure of the new molecular composition forms the basis of the 3D RESPONSE TECHNOLOGY.
• Improved breakaway torque (stick-slip)
• Fork oil specially developed for modern fork systems
• Significantly improved thermal stability
• Adaptation of the viscosity index in the maximum range
• Improved shear stability
• Optimum air release
• Reduced formation of foam

Product number
Product
RACING SHOCK OIL is all about maintaining the absolutely outstanding performance of RACING FORK OIL while withstanding the higher thermal loads encountered in the shock absorber without suffering any losses.
• Optimum reduction in the coefficient of friction
• Improved initial breakaway torque (stick-slip)
• Specially developed for high thermal loads
• Minimal formation of foam
• Optimum air release for a very quick process



552-303-001 Motorex Racing Fork Oil 2,5W 1 ltr (6)


552-303-020 Motorex Racing Fork Oil 2,5W 20 ltr
552-306-001 Motorex Racing Fork Oil 4W 1 ltr (6)
552-306-020 Motorex Racing Fork Oil 4W 20 ltr
552-306-060 Motorex Racing Fork Oil 4W 60 ltr
552-309-001 Motorex Racing Fork Oil 5W 1 ltr (6)
552-309-060 Motorex Racing Fork Oil 5W 60 ltr
552-312-001 Motorex Racing Fork Oil 7,5W 1 ltr (6)
552-315-001 Motorex Racing Fork Oil 10W 1 ltr (6)
552-315-020 Motorex Racing Fork Oil 10W 20 ltr
552-318-001 Motorex Racing Fork Oil 15W 1 ltr (6)
Multigrade fork oil, for optimum damping at all temperatures. Prevents the formation of foam and inhibits corrosion. With care additive for seals.
• Protects against corrosion
• Prevents the formation of foam
• Reduces wear

552-300-001
Product number Product
552-324-001 Motorex Racing Shock Oil 1 ltr (6)
552-324-020 Motorex Racing Shock Oil 20 ltr

552-324-060 Motorex Racing Shock Oil 60 ltr
Shock absorber oil for racing with a high viscosity index. Provides optimum damping even under extreme conditions. Prevents the formation of foam and inhibits corrosion.
• Superb damping performance
• Optimum corrosion protection
• Excellent air separation abilities
• Outstanding protection against ageing
• Reliable wear protection

Product number
552-321-005 Motorex Racing Sd-1 5 ltr (4)
MOTOREX RACING BIO is a cleaner in powder form specially developed for off-road motorbikes and quads (ATVs) that feature a reusable foam air filter. Thanks to its active substances, it also quickly dissolves the most stubborn dirt.
• Developed by MOTOREX Racing Lab in collaboration with Twin Air
• Powder form
• Biodegrades quickly

552-232-0009
900 gr (12)
• Specially developed air filter oil for foam air filter elements with good adhesion.
• Keeps out sand, dust and water. Guaranteed optimal air flow.
• Very good adhesion.


552-359-001 Motorex Air Filter Oil 206 1 ltr (12)
552-362-0007 Motorex Air Filter Oil 750 ml (12)
MOTOREX RACING BIO AIR FILTER OIL is an air filter oil specially developed for off-road motorbikes and quads (ATVs) that feature a reusable foam air filter. This biodegradable special oil has excellent absorption capacity with regards to dust and dirt. Thanks to the special substances it contains, harmful foreign bodies are prevented from entering the engine – even in the toughest usage conditions.
• Developed by MOTOREX Racing Lab in close collaboration with Twin Air
• Biodegradable
• For reusable foam air filters
552-235-001
Racing Bio 1 ltr (12)
Cleaning agent for foam filter elements. Free of sol-vents, biodegradable and non-combustible. After cleaning, wash out with water and allow to dry. Then treat with MOTOREX AIR FILTER OIL 206.
• Optimum cleaning agent, even for very dirty filters
• For long service life
• Biodegradable

Complete maintenance set for air filters. Indispensable for off-road pilots. Simple, practical and effective.


The perfect kit for chain, motorbike and equipment care - and for everything that requires lubrication.


• Complete care set for motorbikes
• Highly effective, perfect chain cleaning and lubrication
• Protection and a sparkling finish for paint and plastic
• Cleaning and care of helmets and equipment
• Universal lubricating and corrosion protection spray
CONTAINS:
Chain clean degreaser spray 500ml
Chainlube road strong 56ml
Moto shine MS1 500ml
Helmet care spray 200ml
Intact MX 50 spray 200ml
Microfibre cloth
Fast-acting, organically based and environmentally friendly motorcycle cleaner. The optimised power formula gives motorbikes a thorough clean. Its intense cleaning power achieves outstanding results after being left to work for just a short time. The cleaner is concentrated but can also be used in diluted form. With the high-quality manual pump spray, the cleaner can be applied sparingly and can also be used overhead thanks to its 360-degree application.
• Lower pH value formula
• Better distribution over surfaces
• Excellent compatibility with rubber, plastics and metal



Particularly suitable for protection during extended downtimes. MOTO PROTECT maintains, preserves and protects surfaces against dust and dirt. It repels moisture and the fine oil film protects the treated surfaces against corrosion.
• Long lasting
• Care and protection spray
• Preserves bikes when they are not being used for long periods

Quick and protective cleaning for a sparkling clean result. QUICK CLEANER does not need additional water! Ideal for plastics, glass, varnishes, metals as well as windscreens and visors. With the 360-degree spray system, QUICK CLEANER can be applied in all locations.
• Beading effect
• 360-degree spraying system (500 ml)
• Cleans plastics, visors, windscreens and varnished surfaces

High-shine polish for chrome, stainless steel and aluminium. The product cleans, polishes and protects surfaces. For example, it can be used to clean road tar burnt onto motorbike exhausts. An extremely thin, invisible, gloss protective film that protects against corrosion is left behind on the cleaned surface.
• Highly effective cleaning
• Protects against corrosion

Special gloss spray for the perfect finish after cleaning a vehicle. Gives a lasting shine to varnish, plastic, chrome, etc. and forms an antistatic film with droprepellent effect. Also ideal for vehicles at trade fairs or showrooms. MOTO SHINE has a pleasant cherry aroma.
• Perfect gloss finish after cleaning
• Repels water
• Antistatic film
Cleans and degreases even in the event of stubborn dirt. Reliably dissolves oil, grease, tar etc. without leaving behind any residues. Cleans ignition plugs, battery terminal posts, electrical connections and contacts. Safe for rubber, plastic and varnish.
• Contact cleaner
• Dielectric

552-451-0005
Brake cleaner degreases and cleans all brake and coupling parts under high pressure without leaving any residue. Reliably dissolves and removes oil, grease, tar, brake fluid, dirt, etc.
• Does not attack rubber, plastic or paint.
• High can pressure for excellent cleaning results
• Residue free cleaning

552-448-0005


BRAKE CLEAN is a volatile cleaner. Manufactured on the basis of hydrocarbons. Does not contain any aromatic or chlorinated hydrocarbons and is very compatible with all metals as well as lots of paints and plastics. Is free from harmful substances such as PCB, lead, cadmium and other hazardous substances. Cleans and degreases all brake and coupling parts without leaving behind any residue. Reliably dissolves and removes oil, grease, tar, brake fluid, dirt, etc. Does not attack rubber, plastic or paint.
This glass cleaner with active foam is a highly effective cleaner for any flat surface such as windows or mirrors in your vehicle or at home and in the office. The special formula removes all kinds of dirt easily and streak-free, leaving behind a pleasant citrus scent. The stable active foam means no unwanted liquid will run off when cleaning vertical surfaces. With long-term protection for a longer-lasting cleanliness. Do not spray on hot surfaces or use in direct sunlight. Not suitable for polycarbonate glass.
• Upside-down use
• Targeted use
• Visible, white foam

Quickly and effectively loosens and removes dust, insects, oil residue etc. Increased safety thanks to a smudge-free, clear view. The handy little cleaning kit, which contains one wet wipe and one dry, fits in any small bag, making it perfect for use on the move.
• Perfect and effective clean
• See clearly again straight away
• Can also be used to clean wind shields, lights and indicators, for example

Textile and leather impregnation. Highly effective, long-lasting protection against wet conditions and oil. Suitable for leather, textiles and microfibres (e.g. GORE-TEX®); preserves the natural breathability of the fabric. Ideal for shoes, motorbike, ski and cycle clothing, convertible roofs and other sport and leisure items.
• Oil-repellent
• Breathable
• Efficient


The tried-and-tested active foam formula cleans and freshens up helmets and various protectors, but can also be used on your gloves and the full range of protective equipment. Ice hockey gear, boxing gloves, riding boots, or walking shoes – the care spray is ideal for all hard-toclean items that require gentle cleaning and freshening up. HELMET & GEAR CARE is very easy to use and lets you care for and deodorise your equipment – both gently and effectively – in a single step.
• Deoderizes
• Freshens
• Quick and effective


Carburetor cleaner to ensure trouble-free cleaning of residue and impurities from carburetors. Cleans air passages, inlet flaps, Venturi tubes, adjustment screw seats and carburetor housings. Ideally suited for use in overhauls of older vehicles or those that have been laid up for a relatively long time.
• Removes residue left by poor-quality fuel
• Extreme cleaning power
552-377-0005


Dependable, highly effective, starting aid for petrol and diesel engines. Friction-reducing lubricating additive reduces engine wear at start-up.
• Economical to use
• Friction-reducing
• Preserves the engine and battery

552-442-0005
• Special oil for hydraulic clutch systems Excellent age resistance. Ideal viscosity at both high and low temperatures. High seal compatibility. Area of application: When-ever the manufacturer recommends a mineral oil based fluid.

Fuel additive that cleans and breaks up deposits throughout the fuel injection system. It improves corrosion protection and binds water. For all petrol and diesel fuels.
• Long-lasting corrosion protection
• Binds water
• Special cleaner for fuel system
• Mixing ratio 1 L : 250 L, 125 ml : ~30L

Fuel additive that improves the properties of all fuels mixed with ethanol. Its properties reduce phase separation/separation, optimise fuel efficiency and reduce corrosion. Ensures that the engine runs more easily, removes deposits in the combustion chamber, regenerates old fuel and helps to remove water from the system.
• Ensures that the engine runs more easily
• Regenerates old fuel
• Removes deposits in the combustion chamber
• Shock 10 ml : 10 L, prevention 10 ml : 20 L

Fuel oxidation protection additive; helps to stabilize fuel during the winter season, also binds water and protects the system against rust and corrosion. Suitable for petrol and diesel systems. With an effect lasting up to six months. For all seasonal vehicles and units with or without turbocharging, particulate filters or catalytic converters.
• Improves start-up behaviour
• Protects the fuel system
• Increases corrosion protection
• Mixing ratio 1 L : 250 L, 125 ml : ~30L

Special, fast-drying and economical tyre mounting fluid for effortless mounting and removal of all conventional tyres. Tested for tyre pressure monitoring systems. (TPMS). Does not leave any visible residues after mounting.
• Very good lubrication properties
• Quick drying time
• Efficient in application

Special grease developed for lubricating sealing rings in suspension forks and shock absorbers. It is effective at reducing stickslip effects.
• Reduces stick-slip effects
• Extremely water-repellent
• Oxidation-resistant
DIN 51502, KP2G-30, NLGI 2

Protects battery terminal posts, pole terminals, connectors and starter connection cables. Prevents corrosion and oxidation.
• Fire resistance
• Excellent lubricating properties




Calcium-based yellow fluorescent grease with remarkable and long-lasting lubricating performance.
MOTOREX BIKE GREASE 2000 is a highly water-repellent and extremely pressureresistant grease. It offers increased oxidation resistance and very good ageing resistance. Ideal for lubricating bearings, wheel bearings, joints and headset. Neutral to elastomers and seals and prevents galvanic corrosion.
• Ideal for joints, hubs and headsets
• Excellent pressure resistance
• Extremely water-repellent NLGI 2

Lithium-based white lubricant grease. Outstanding wear-reducing properties and remains malleable at cold temperatures.
• Reliable corrosion and wear protection
• Very stable lubricating film
DIN 51502, KLF2K-30, NLGI 2

GREASE 176 GP is based on mineral oil and lithium soap. With effective EP (extreme pressure) additives. Ageing-resistant, stable against water, weak acids and alkali solutions. GREASE 176 GP is a multi-purpose grease for use in a wide variety of applications to ensure excellent performance in all slide bearings and roller bearings. For use in workshops, agriculture, industry, transport and construction.
• Good wear protection
• Solid ageing-resistance
• Increased corrosion protection
DIN 51502, KP2K-20, NLGI 2

Viscous grease spray with a good level of adhesive power; can be used as an alternative to a grease brush. Water and salt-water-resistant. Excellent corrosion and wear protection.
• Water-resistant
• Corrosion and wear protection
• Adhesive
552-418-0005
Special mounting (white) paste for metal and aluminium connections including any parts that need to be press-fit, aluminium supports in metal frames and all screw connections.
• Prevents contact corrosion
• Prevents micropitting
• Water-resistant
NLGI 1-2
552-508-0001
Rust remover and screw releaser with outstanding creep effect. Quickly loosens seized-up metal parts. Protects against corrosion and repels moisture. Rust-loosening, water-repellent and lubricating.
• Penetrating
• Protects against corrosion
• Repels water
• EV approved
NLGI 1-2
552-365-0005

Drilling and cutting oil spray for all high-alloyed steel grades as well as non-ferrous metals and aluminium. Increases the machining speed, reduces wear and extends the service life of tools. Optimum cooling and lubricating properties.
MOTOREX EASY CUT PUMPSPRAY is perfect for processing (drilling, thread cutting, sawing, turning, milling, punching) all high-alloyed steel grades as well as non-ferrous metals and aluminium.
• Reduces wear caused by friction
• Extends the service life of tools
• Low evaporation loss
Product number Product
552-419-0002 Motorex Easy Cut Spray 250ml (12)

Welding protection spray; silicone and solvent-free and incombustible. Effectively prevents the adhesion of welding beads, protects weld deposits and equipment from corrosion, does not leave behind any ash residues and can easily be rinsed with water.
MOTOREX PROWELD SPRAY is ideal for use in any type of welding operation. Product is sensitive to low temperatures do not store or use at temperatures below 5°C.
• Silicone- and solvent-free
• Extends the service life of tools
• Low evaporation loss

Product number Product
552-440-0005 Motorex Proweld 500ml (12)
A special lubricant for preventing the fusing/ sticking of parts subject to high thermal stress such as exhaust screws, ignition plugs, brake pads and heat exchangers. Noise-absorbing, oxidation-stable, protects against corrosion, very adhesive, saltwater-resistant and extremely temperature-stable. Application range: -40 °C to +1200 °C.
• Adhesive
• Very good corrosion protection
• Water-resistant
Product number Product
552-412-0003 Motorex Copper 300 ml (12)

Indispensable for industry, trade, workshops, service stations, households, gardens, sport and leisure activities. Lubricates all moving parts, stops squeaking, undermines water, protects against corrosion, has a dielectric effect, cleans and cares for metals and plastics. Fully synthetic.
• Eliminates squeaking
• Penetrating
• Protects against corrosion
• EV approved
Product number Product
552-430-0005 Motorex Joker 440 500 ml (12)

Spray with PTFE is a dry lubricant, suitable as an anti-seize and release agent, which does not leave behind any oily marks. The extremely thin PTFE layer with a particle size of 5 μm prevents parts sticking to moulds and stops mounted parts becoming seized on machine tools. Almost unlimited chemical resistance and suitable for use over a very wide range of temperatures (+265 °C/+509 °F). Antistatic.
• Dry lubricant
• Adhesive
• Smoothing
Product number Product
552-469-0002 Motorex Spray Ptfe 200 ml (12)

Lubricates, cares for and protects rubber, plastic and all metal parts. Plastic components are given a high gloss; rubber items receive care and protection. Thermal stability from -50 °C (-58 °F) to +200 °C (+392 °F). Antistatic, water-repellent, guards against oxidation.
• Water-repelling
• Temperature-stable
• Protects
Product number Product
552-463-0005 Motorex Silicone 500 ml (12)

Our approved products are used and demanded by leading professional race teams including MotoGP, World Superbikes, British Superbikes and many more including Motocross and Karting.
Developed using the latest lubricant technologies, our products offer users measurable performance improvements. Use FUCHS Silkolene and get a genuine ‘Oil Tune’.




Fully synthetic oil developed for highperformance 4 stroke engines. Using XP Technology, PRO 4 provides excellent engine protection, reduces friction, and enhances power output, making it ideal for sportbikes, superbikes, and highperformance road and off-road motorcycles.
PRO Ester Based Fully Synthetic
API SN, JASO MA2 approved

551-116-001
Silkolene Pro 4 10W-40 XP 1L
551-116-004C Silkolene Pro 4 10W-40 XP 4L CUBE
551-118-001
Silkolene Pro 4 15W-50 XP 1L
551-118-004C Silkolene Pro 4 15W-50 XP 4L CUBE
551-120-001
Silkolene Pro 4 10W-60 XP 1L
551-120-004C Silkolene Pro 4 10W-60 XP 4L CUBE
551-122-001
Silkolene Pro 4 5W-40 XP 1L
551-122-004C Silkolene Pro 4 5W-40 XP 4L CUBE
551-122-020C Silkolene Pro 4 5W-40 XP 20L CUBE
551-124-001
Silkolene Pro 4 10W-50 XP 1L
551-124-004C Silkolene Pro 4 10W-50 XP 4L CUBE
551-124-020C Silkolene Pro 4 10W-50 XP 20L CUBE
Semi-synthetic 4T engine oil designed for modern motorcycles. Its advanced formulation using MC-Syn Technology provides superior engine and transmission protection, minimizes wear, and ensures smooth operation from startup to full power, making it perfect for everyday riding in varying weather conditions.
SUPER Semi Synthetic API SL, JASO MA2 approved
551-104-001
551-104-004C
551-104-020C

Silkolene Super 4 10W-40
High-performance part synthetic engine oil with XP technology, COMP 4 provides superior engine protection, improved power, and reduced fuel consumption. Ideal for road and off-road motorcycles, it offers excellent wear protection and maintains viscosity throughout the service interval.
COMP Ester Based Premium Semi Synthetic API SN, JASO MA2 approved

551-110-001 Silkolene Comp 4 10W-40 XP 1L
551-110-020C Silkolene Comp 4 10W-40 XP 20L CUBE
551-110-060 Silkolene Comp 4 10W-40 XP 60L
CUBE
High-performance engine oil, designed specifically for off-road and utility vehicles. Protects the engine and transmissions from start to full power. Detergents, dispersants, load-carrying agents and anti-corrosion systems provide excellent engine cleanliness and minimum wear to ensure long-term reliability.
5W-40
PRO Ester Based Fully Synthetic API SN, ACEA A3/B3, JASO MA2 approved
10W-40
SUPER Semi Synthetic
API SL, JASO MA2 approved
Product number Product
551-134-004C Silkolene Quad ATV 5W-40 4L CUBE
551-136-001 Silkolene Quad ATV 10W-40 1L
551-136-004C Silkolene Quad ATV 10W-40 4L CUBE


Mineral engine oil formulated for all Harley Davidson and Metric VTwins. Provides high level of engine cleanliness and protects engine components from wear and corrosion.
SUPER Semi Synthetic API SL, JASO MA2 approved
Fully synthetic engine oil designed for highperformance 4-stroke scooters, offering superior protection against wear, reduced friction and enhanced engine performance. It offers excellent stay-in-grade performance over a wide temperature range, ensuring long-lasting reliability in both city and sporty riding conditions.
PRO Ester Based Fully Synthetic API SN, JASO MA2 approved


Designed for dry sump speedway engines, improves lubrication, minimizes high temperature thickening and lacquer formation. Improves lubrication and minimizes the risk of thickening and lacquer formation at high temperature. Fully soluble in methanol based fuels.
MUST NOT BE MIXED WITH MINERAL OILS
FOR RACE USE ONLY
RACE Fully Synthetic

SILKOLENE SNOW PRO 2 is a fully synthetic 2-stroke oil for Snowmobile engines operating with high output power and in cold climate. Clean burning formula that ensures freedom from plug fouling and heavy combustion deposits in vital areas such as rings, ports, pistons and valves, giving more efficient combustion. Ultra-low smoke providing maximum, clean, performance, extra power and reliability. Reduces friction and wear under high stress and ensures a high degree of internal engine cleanliness for optimum performance retention.
PRO Ester Based Fully Synthetic JASO FD / ISO L-EGD / Direct Fuel Injection (DFI) proven

SNOW COMP 2 is a Premium Semi Synthetic ester based 2-stroke oil for Snowmobiles, developed for usage in cold conditions. MC Syn Technology, clean burning formula reduces wear and ensures reliabiilty. Compatible with all fuels. Suitable for PreMix and Injector.
COMP Ester Based Premium Semi Synthetic
/ JASO
/ ISO L-EGD / 253 Snowmobile test

Synthetic Ester based, clean burning, low smoke engine oil. Optimises power and improves fuel economy. Outstanding resistance to ring sticking, plug fouling and pre-ignition. Compatible with all fuels. Suitable for both premix and injector systems.
COMP Ester Based Premium Semi Synthetic
FC/FD / API TC / ISO L-EGD

Low-smoke 2-stroke oil designed to reduce engine wear and prevent piston seizure. It offers excellent anti-wear properties and protects against exhaust port blockage, making it ideal for both pre-mix and injector systems in high-performance 2-stroke engines.
COMP Ester Based Premium Semi Synthetic
FC/FD / API TC / ISO L-EGD
Product
Ultimate engine protection, increased power, performance and reliability. Track experience at Grand Prix and international level has shown that PRO 2 is one of the very few competition oils which can provide the latest racing engines with the outstanding load-carrying and cleanliness requirements necessary for full power output even at high fuel to oil ratios. Only for use with PreMix systems. Recommended mix up to 50:1 (2%).
RACE Fully Synthetic CIK FIA Approved
Product
551-310-001
Pro 2 1L


Comp 2 1L
Pro KR2 1L Product
Fully synthetic, ultra-low smoke 2-stroke oil offering superior protection for highperformance engines. Its advanced formulation reduces deposits and enhances reliability, ensuring clean burning and maximum power output, while being suitable for both pre-mix and injector systems.
PRO Ester Based Fully Synthetic JASO FC/FD / API, TC / ISO L-EGD

Product
551-308-001
Comp 2 Plus 1L 551-308-004C
Comp 2 Plus 4L CUBE
SAE 30. For high output kart engines giving exceptional performance and reliability. Do not mix with other lubricants. Compatible with all fuels. Consult engine manufacturer for mix recommendations.
RACE Fully Synthetic CIK FIA Approved

High-quality, high-boiling-point racing brake fluid, ideal for extreme conditions. It offers excellent resistance to brake fade, ensuring reliable performance in both road and race environments, with a typical dry boiling point of 328°C (594°F) and wet boiling point of 204°C (399°F).
DOT 3 & 4
FMVSS 116, SAE J1703/J1704

High-performance fluid suitable for motorcycles across the UK, US, European, and Japanese markets. It offers excellent resistance to brake fade and ensures smooth clutch operation, providing reliable performance under demanding conditions with a typical dry boiling point of 230°C (594°F) and wet boiling point of 155°C (399°F).
DOT 3 & 4
FMVSS 116, SAE 70R 1 & 3, SAE

Product number Product
551-550-0005
The FUCHS Silkolene RSF range (formerly known as Pro RSF) has replaced their standard Fork oil Counterparts. Our premium high performance RSF range, available in (2.5, 5, 7.5, 10 & 15 W) is a race/ road/track proven suspension fluid already in use and chosen by many of today's market leading suspension manufacturer's and currently already used as original equipment in many of today's modern motorcycles.

551-470-001
551-470-020
551-472-001
551-472-020
551-474-001
551-476-001
551-478-001
Silkolene RSF 2.5 1L
Silkolene RSF 2.5 20L
Silkolene RSF 5 1L
Silkolene RSF 5 20L
Silkolene RSF 7.5 1L
Silkolene RSF 10 1L
Silkolene RSF 15 1L Product number Product
Premium synthetic suspension fluid designed to provide smooth suspension performance under all road and competition conditions. Its advanced high viscosity index formulation combats friction, protects seals, and resists corrosion. Grades can be mixed.
ISO 68
551-480-001

SF 20 1L
Exceptional performance and zero drag in racing forks. Low friction synthetic additives ensure smooth, predictable action on all terrains. Reduces stickslip, minimises pressurisation at high temperature in all conditions.

Product number Product
551-482-001 Silkolene 02 Synthetic Fork Oil 1L
551-484-001 Silkolene 05 Synthetic Fork Oil 1L
Premium hypoid gear oil designed to provide outstanding lubrication and protection for motorcycle shaft drives/ final drives. Its robust formulation ensures smooth gear shifts, reduces wear, and offers excellent performance in both API GL-4 and GL-5 applications.

Semi synthetic racing gear oil. Race proven ester synthetic formulation gives smooth gear changes, positive clutch action and reduced wear especially where aluminium clutch plates are used. SAE 80W-90. Crankcase rating SAE 10W-40.

Designed to improve power and maintain consistent high performance, PRO SRG 75 is a fully synthetic racing gear oil designed for high-performance motorcycles. With a naturally high viscosity index and excellent shear strength, PRO SRG 75 ensures smooth gear changes and extended component life thanks to superior protection against wear and friction even under the most demanding conditions.
SAE 75W-80

Advanced gear oil for wet or dry clutch transmissions. Reduces drag, combats clutch slip and protects highly stressed components.
Light: SAE 75W-80, Crankcase rating SAE 10W-40 Medium: SAE 85W-90, Crankcase rating SAE 20W-50
AP GL-3 / API GL-4

Packed in an easy-to-use one-shot 125ml tube, SCOOTER GEAR OIL 80W-90 is ideal for use in all scooters where an SAE 85W-90 or 80W-90 lubricant is specified. Outstanding performance in transmission drive systems of scooters and mopeds.


A superior high temperature anti-seize lubricant containing copper. Designed to control pitting, rusting, thread distortion and seizure due to corrosion and chemical attack, the product overcomes galling on assembly and reduces dismantling torque. Lowering force required during assembly, it is perfect for threaded connections, wheel nuts, spark plug threads, cylinder head bolts, exhaust systems, etc. Prevents brake squeal - apply to caliper, pins and back of pad.
Product number

An advanced, high melting point, synthetic racing grease, PRO RG2 is a multi-functional, high performance grease with exceptional heat resisting and water-proofing properties. PRO RG2 has outstanding water repellence, excellent corrosion inhibition properties and high resistance to water wash-off, making it an ideal choice for rally and watercraft use.
NLGI-2
551-546-0001 Fuchs Copper Paste 100gr Product number

551-540-0005 Silkolene Pro RG2 Grease 500g
551-542-0001 Silkolene Pro RG2 Grease 100g
A highly effective, water rinsable cleaner/ degreaser formulated specifically for cleaning foam filters prior to re-oiling with FUCHS

Advanced, low viscosity coating treatment designed to improve the efficiency of foam air filters. Contains polymeric additives to provide a hyper-tacky surface that resists the ingress of the most pervasive sand, dust and water, without affecting engine breathing. Developed to provide outstanding engine protection even in the most severe conditions. Reduces the risk of breakdown and helps extend engine life. The chlorinated solvent-free formula will not damage the foam filter construction or air box materials.
SILKOLENE FOAM FILTER OIL. Easily removes soiling, grease and grime, extending the life of filters. FOAM FILTER CLEANER is also suitable for many other cleaning tasks including the degreasing of engine parts and the removal of stubborn oil based marks. Product
551-452-001

Foam Filter Oil
Based on low toxicity propylene gylocol, PRO COOL is an advanced, all-season engine coolant, formulated to provide superior cooling performance. PRO COOL provides optimum frost protection in severe winter condition whilst protecting against overheating, corrosion, and cavitation. The ready-to-use formulation includes 50% distilled water so will not leave any lime scale deposits and is compagtible with most alloys, plastics, elastomers and gasket materials used in modern engine cooling systems.

MAG COOL is a race-proven, ready-to-use premium coolant based on mono-ethylene glycol (MEG), designed for high-performance motorcycles. Free from nitrites, amines, silicates and phosphates, MAG COOL offers excellent protection against overheating, corrosion, and cavitation, ensuring reliable engine cooling under extreme racing or road conditions.

A powerful cleaner for brake and chain components, BRAKE & CHAIN CLEANER is a powerful, fast-acting spray designed to remove dirt, grease and unwanted deposits from motorcycle brake and chain systems. Its advanced formula ensures thorough cleaning, helping to maintain optimal braking performance and prolong chain life. Suitable for all types of motorcycles, this cleaner dries quickly and leaves no residue.

High-performance 100% synthetic racing chain oil designed for both road and off-road motorcycles. Its advanced formula provides superior protection against wear and corrosion, reducing chain friction and ensuring longlasting lubrication. Suitable for all chains including "O" and "X" ring types.

Semi-synthetic chain lubricant suitable for both on- and off-road motorcycles. Its advanced formulation ensures maximum penetration, superior anti-wear protection, and reduces chain friction for smoother operation. This lube resists fling-off, ensuring long-lasting lubrication even in challenging environments. Suitable for all chains including "O" and "X" ring types.

Versatile, premium moisture-repellent spray that can be used in a variety of applications in both the garage and home. With excellent dewatering properties, ALL IN ONE provides exceptional protection by repelling moisture, preventing rust, and lubricating moving parts. Ensures smooth operation and longlasting protection against corrosion. Its multi-purpose formulation makes it a reliable choice for maintaining motorcycles, tools, and household equipment. Please note: May affect certain rubbers and plastics.

Scented, high-quality and water-repellent, hard surface conditioner that provides a protective microbarrier against dirt and and unwanted deposits. PRO PREP enhances the appearance of plastic parts with a factory finish and helps waterproof and insulate ignition systems.

This graphited penetrating spray eases the dismantling of seized threaded fasteners. Can also be used to lubricate and clean cables. When used with a cable oiler, SILKOPEN penetrates the full length of the cable, forcing out dirt and corrosion, leaving a thin graphite and oil lubricating film for a silky smooth lever action.
Powerful cleaning solution designed to remove gum, varnish, and carbon deposits from fuel injectors and carburetors. It ensures optimal fuel system performance, improving throttle response and fuel efficiency for cleaner, more efficient operation. Also suitable for cleaning throttle linkages and carburettor bodies.

551-516-0005
Highly effective corrosion inhibitor designed for racing engines. It provides excellent protection against rust and corrosion, even in harsh environments. Mixed at a ratio of 3% to 5%, it ensures long-lasting engine protection without affecting performance. PRO CCA ULTRA provides corrosion protection for all metals normally found in cooling systems and is harmless to seals, elastomers and all other non metals used in the cooling circuit.
NOTE: Contains silicones - do not use where painting is carried out or on windscreens or visors. Product number
551-464-001
NOTE: May affect certain rubbers and plastics.

551-512-0005
TITANIUM DRY LUBE is a non-fling chain lubricant, boosted with PTFE for superior antiwear and anti-corrosion performance, even in severe conditions. With a hyper-strong dry formula that leaves a white "as new" finish, TITANIUM DRY LUBE ensures long-lasting protection without attracting dirt, making it ideal for both road and off-road use.

Titanium Dri Gel 500ml

A cost-effective spray-on / hose-off bike cleaner suitable for all street and off-road motorbikes, bicycles, quads and ATV’s.

551-532-001
551-532-005
Wash Off (Green) 1L
Wash Off (Green) 5L



FEATURES
A new generation of mineral oil for year-round use. The oil has been developed for todayʼs modern heavy-duty diesel engines.
• Full engine power even in extreme conditions
• Clean engine
• Reduced fuel and oil consumption
• Smooth performance between oil changes
• Lower TCO
• Environment friendly
Platinum Ultor Plus 15W-40 is designed for modern diesel engines that meet Euro V standards and have SCR catalytic converters.
Platinum Ultor Plus is also ideal for older engines that meet Euro IV, III, II and I standards.
Quality class: API: CI-4/CH-4/CG-4/SL/SJ
ACEA: E7/E5/E3/B4/B3/A3
Viscosity: SAE 15W-40
APPROVALS
MAN M 3275-1
Volvo VDS-3
Mack EO-N
Renault VI RLD-2
Cummins CES 20071/72/75/76/77/78
MTU Type 2
TEDOM 258-3
AVIA - Engine type: 712, D407, D421.76, D421.85
Meets requirements:
MB-Approval 228.3
MB-Approval 229.1
Volkswagen 505.00
Scania
(Scania Euro III and Euro IV engines with oil change interval of 60,000 km)
DAF EUR 2 i EUR 3
Iveco
Deutz DQC-III-05
Mack EO-M Plus
Detroit Diesel 7SE 270
Caterpillar ECF-1a


FEATURES
A new generation of mineral oil for year-round use. The oil has been developed for todayʼs modern heavy-duty diesel engines.
• Full engine power even in extreme conditions
• Thanks to Mid SAPS technology, the filters stay clean longer.
• Anti-corrosion
• Allows longer service intervals
• Meets emission requirements for harmful substances
Platinum Ultor Futuro 15W-40 is designed for all types of diesel engines that meet Euro V standards and have EGR / SCR, DOC and DPF catalytic converters.
Platinum Ultor Futuro is suitable for extending the life of fixed filter systems.
Quality class: API: CJ-4/CI-4 Plus/CI-4/SM/CF
ACEA: E9, E7
Viscosity: SAE 15W-40
APPROVALS
MAN M 3575
Volvo VDS-4, Volvo VDS-4.5
Mack EO-O Premium Plus Renault RVI RLD-3
Cummins CES 20081
MB-Approval 228.31
Meets requirements:
MTU Type 2.1 Caterpillar ECF-2, ECF-3 DDC 93K218
Global DHD-1
JASO DH-1, 2
MAZ
Isuzu


55-600-060

X-1R IS A HIGH LEVEL
LUBRICATION SYSTEM... ...ORIGINALLY DEVELOPED IN THE USA... ...FOR THE NEEDS OF


The X-1R is a synthetic, liquid treatment that significantly reduces friction caused by mutual contact and movement between metal surfaces. This makes it highly versatile for a wide range of lubrication applications. It enhances the performance of motors, transmissions, differentials and hydraulics, reducing wear by 45–75%.
• Facilitates cold start
• Reduces fuel consumption
• Reduces the temperature of machinery and oil
• Reduces emissions, including smoke
• Reduces engine noise
• Prevents jamming




Used in engines to lubricate and clean the entire fuel system and promote combustion.
• Cleans tanks, pipes, pumps and nozzles
• Gradually removes soot from the engine
• Chemically eliminates condensation water from the tank
• Combustion stabilizer burns fuel more completely
• Reduced maintenance and fuel costs
• More horsepower



Increases power and enhances combustion. Increases engine performance and enables maximum use of horsepower. Acts as a cushion, dampening the shocks of the valves and lubricates and cleans the entire fuel system. Reduces engine and fuel consumption. Not for street use.

The oil stabilizer is a comprehensive additive for older engines. The cleaning and blocking agents added to it minimize oil burning, improve oil penetration and prevent damage caused by cold starting. It also reduces blue smoke, oil consumption and seal leaks.
• Reduces oil leaks in the engine, gearbox and power steering
• Minimizes oil burning, reduces blue smoke
• Prevents damage caused by a cold start
• Increases oil life by up to 75%
• Compatible with all synthetic and mineral oils
• Minimizes transmission and differential noise
• Enriched d/i formula


Used in all 2-stroke engines to protect the engine, clean the fuel system and improve engine performance even in cold conditions.
• Restores horsepower
• Lubricates effectively
• Makes startup easier
• Smokeless and odorless
• Also works in cold temperatures
CEC TSC-4/API TC+, JASO (M35-93) FC, ROTAX 253

Fully synthetic chain oil that penetrates very well into the joints of the chain, forming a light, durable surface. Places of use: Industrial/agricultural chains, motorcycles, bicycles, also for O-ring chains.
• Effective lubrication and protection
• Protects against water, dust and impurities
• Withstands heavy surface pressures

553-9062 X-1R synthetic 2-stroke oil 1L Product number Product
553-9049 X-1R chain oil 150ml
553-9050 X-1R chain oil 400ml

A versatile lubricant with exceptional penetration capability for household, industrial and workshop use. Also suitable for electrical appliances.
• Remove rusted bolts and nuts
• Good penetration
• Rejects water
• Also suitable for plastic and rubber
• Cleans
• High flash point

Product
553-9044 X-1R PSL lubricant 400ml

Premium all-temperature grease. Water resistant multi-purpose grease/lubricant that protects against rust and wear.
• Lubricates in all seasons at high and low temperatures
• Adheres and stays well but not sticky
• Effectively protects against wear and tear - extends the service life of the object
• Withstands heavy loads
• Effective protection against rusting
• Can withstand both fresh and salt water
• Does not contain harmful solvents


Air Tool Lube. Lubricant for compressed air tools and pneumatics. Used to clean, lubricate and protect compressed air tools against corrosion and rust.
• Helps tools to work at maximum power
• Durable protection against wear
• Reduces friction
• Maintains operation of air tools
• Extends service life
• Prevents rusting and corrosion
• Contains no solvents


Lithium-based multi-purpose grease with excellent wear and pressure resistance.Grease provides superior lubrication for bearings, as well as forestry, agricultural, road work, mining and industrial machinery.
NLGI 2

Used to remove friction and reduce wear in applications where a highly lubricating grease is required. Resistant to heavy loads and extreme temperatures. Excellent water resistance and rust protection.
• Multipurpose and long-lasting
• Withstand high loads and high temperatures
• Particularly suitable for extreme conditions
• Compatible with other lubricating greases
NLGI 2

High-quality engine oil for lawn mowers. X1-R with additives guarantees better resistance to surface pressure than standard engine oil.
Mineral oil


553-83051
Greentek Lubricants high-quality fully synthetic 2-stroke oil for year-round use for chainsaws and clearing saws. Perfectly suitable for winter use, also for fresh and mixed lubrication. Suitable for all 2-stroke engines where the best lubrication properties are required. In the bottle, a dosing measure, which makes it easier to make the fuel mixture.
2-S Synthetic
JASO FD, API TC, ISO GD++, ROTAX 253

Greentek is a high-quality synthetic motor oil for year-round use. X1-R with additives guarantees better resistance to surface pressure than standard engine oil. Suitable for small air-cooled engines (lawn mowers, generators, garden tractors, garden tillers, snow blowers).
Semi-Synthetic API SG JASO MA/MA2

553-83053
Mineral-based special oil for four-stroke boat engines. The effective X1-R additive reduces friction and reduces the wear of parts. Oils anti-corrosion features provide excellent protection for gasoline and diesel engines of boats.
Mineral oil SAE 10W-30, NMMA FC-W, JASO MON, API SL


High-quality bevel gear grease for clearing saws. Contains X-1R additive which reduces friction, thus improving the service life of the gearbox. Suitable for clearing saws with angle gear. Easy-to-squeeze plastic bottle.


For simple and clean mounting and removal of all tyres. Particularly suitable for run-flat and motorcycle tyres.


High quality hydrostatic oil (HST). Contains X-1R additive which reduces friction, thus improving the service life of the gearbox. The oil is suitable for riding mowers with hydrostatic transmission.

553-83055
Mineral-based special gear oil for boat engines, intended for the lubrication of boat traction devices and bevel gears of outboard motors. The effective X1-R additive reduces friction and reduces wear on parts. The oil tolerates wet conditions very well, protecting components from corrosion.
SAE 80w90, API GL-5, MIL-L-2105DL

553-83058
553-83059

Greentek Outboard lower unit 80W90, 250ml, (Mineral oil - X1-R)
Greentek Outboard lower unit 80W90, 1L, (Mineral oil - X1-R)
High-quality special chain oil suitable for use by professional lumberjacks. Excellent lubrication properties. Used for lubrication and maintenance of chains of chainsaws and cables. Excellent antioxidation and anti-corrosion properties and high film strength (sticking well to metal parts of the machinery). Perfect fit for combustion engine saws and electric saws.

High-quality special chain oil suitable for use by professional foresters. Excellent lubricating properties. Used to lubricate and maintain chains of chainsaws and ropes. Excellent oxidation and anti-corrosion properties and high film strength (adheres well to metal parts of the machine). Ideal for internal combustion engine saws and electric saws. It is well suited to winter conditions, withstanding temperatures down to -30 C.

Hydraulic oil for year-round use in all hydraulic systems.
• Tipping equipment
• Fluid couplings
• Torque converters
• Boat hydraulic controls
Quality grade: 32/46 HVLP


Specialized oil for 4 stroke engines with or without a turbocharger. A customized additive ensures a stable operation on hard loaded engines in a demanding environment. The oil contains excellent corrosion inhibitors that prevents corrosion from fresh and salt water. This high quality oil provides maximum protection against wear and prevents buildup of deposits in the engine's internal parts.
Specifications
• SAE grad(er): 15W-40
• API: C1-4/CG-4/ CF-4/CF/SL
• ACEA: 04-E7/ A3/B3/ B4
• Volvo: VDS 3
Product number Product

117-6-2402-1 Diesel engine oil 15w40 1L, Replaces: 3840002
117-6-2402-208 Diesel engine oil 15w40 208L Drum
117-6-2402-20 Diesel engine oil 15w40 20L Bag-in-box Replaces: 22479643
117-6-2402-5 Diesel engine oil 15w40 5L, Replaces: 3840003
“The product is ash free, which means that soot residues are not formed on the internal moving parts of the engine. The oil is temperature-stable, which provides an easy start winter time and ensures a cool operation summer time. The product is suitable for most piston compressors.
Specifications
• ISO VG80”

Product number Product
117-6-2404-020 Compressor oil ISO VG 80
Drain tap
Drain tap for easy usage of the 20 liters Bag-in box.

Product number Product
117-6-2417 Drain tap 20L Bag-in-box

Transmission oil constructed for gears operating under very tough circumstances. The product is a mineral oil based hypoid oil which contains heavy amounts of EP-additives. The oil has a very broad application area e.g gears and switches and other uses where SAE 90/API GL-5 oil is recommended.
Technical data
• SAE degree(s): 80W-90
• Viscosity at 40 C: 190 mm /s
• Viscosity at 100C: 18.1 mm/s
• Temperature range: -25C - 160C
• Type: API-GL5

Dextron-type ATF oil is designed for power trims, trim tabs and automatic gearboxes. The excellent low and high-pressure properties of the product ensures an excellent function under varying operating conditions. The product is highly oxidative stable, which results in a long life-span. The oil has low volatility and is gentle to all types of gaskets and seals. The product is recommended for all types of automatic and manual transmissions where an ATF oil is recommended.
Specifications
• GM: Dextron III-G
• ZF: TE-ML

117-6-2418-1
117-6-2418-20 Gear oil Mineral 80w-90 20L, Replaces OEM: 3809444
117-6-2418-5 Gear oil Mineral 80W-90 5L Product
117-6-2406-1 ATF dextron III oil 1L, Replaces: 85122800
Synthetic gear oil designed to withstand both high and low temperatures in difficult operating conditions. The product contains well-balanced additives and is intended for all types of transmissions where an EP lubricant is recommended. The oil does not foam, can handle extreme pressures and possesses good anti-emulsion properties.
Specifications
• SAE grad(er): 75W-140
• API: GL-5
• MIL: MIL-L-2105

Recommended for Mercruiser, Volvo DPH 1,59:1, DPG.
117-6-2406-5 ATF dextron III oil 5L, Replaces: 1161995 Product number
117-6-2405-1 Synthetic gear oil 75w140 1L
117-6-2405-5 Gearhouseoil Synthetic 75W-140 5L, Replaces: 3809439
117-6-2405-20 Synthetic gear oil 75w140 20L Bag-in-Box
Synthetic gear oil designed to withstand both high and low temperatures in difficult operating conditions. The product contains well-balanced additives and is intended for all types of transmissions where an EP lubricant is recommended. The oil does not foam, can handle extreme pressures and possesses good anti-emulsion properties.
Specifications
• SAE grad(er): 75W-90
• API: GL-5

Recommended for most AQ-drives, IPS and Outboards.
117-6-2403-020 Synthetic gear oil 75W-90 200ml
117-6-2403-1 Synthetic gear oil 75w90 1L, Replaces: 22479650
117-6-2403-5 Synthetic gear oil 75w90 5L, Replaces: 22479648
117-6-2403-20 Synthetic gear oil 75w90 20L Bag-in-Box Replaces: 22479647
117-6-2403-208 Växelhusolja syntetisk 75W-90 208L Drum
This grease is a so-called complex grease based on synthetic based oils. The product is extremely water resistant and is an excellent choice for a large number of different applications. Handles high loads and temperatures. This grease is resistant to many types of solvents, acids etc. and has a very good mechanical stability. Excellent for shaft bushings and propeller axles etc.
Specifications
• NLGI 3 Replaces: 3809449
Product number Product

117-6-2407 Propeller shaft grease NLGI 3, 500gram
This grease is a so-called complex grease based on synthetic based oils. The product is extremely water resistant and is an excellent choice for a large number of different applications. Handles high loads and temperatures. This grease is resistant to many types of solvents, acids etc. and has a very good mechanical stability. Excellent for a variety range of applications and conditions.
Specifications
• NLGI 2

Product number Product
117-6-2408-020 Universal grease 20 gram tube, Replaces: 828250
117-2408-400 Universal Grease NLGI 2 400gram cartridge, Replaces: 21347121
A high quality oil made of a synthetic based blend. This Long life oil ensures efficient lubrication at varying levels of operating temperatures and loads. It also contains wearresistant additives that keeps the engine clean from harmful slag products which benefits the life of both the oil as well as the engine.
Specifications
• SAE grad(er): 5W-30 Longlife
• API: SM/CF
• ACEA: 04-A3/B3
• MB 229.51,
• Porsche C30,

• VW 502.00/503.01/504.00/505.00/505.01/506.00/506.01/507. 00, BMW LL-04
Recommended for inboard and outboard engines
Product
117-6-2401-1 Petrol engine oil 5w-30 1L, Replaces: 21363429
117-6-2401-5 Petrol engine oil 5w-30 5L, Replaces: 21363430
117-6-2401-20 Petrol engine oil 5w-30 20L Bag-in-Box Replaces: 21363431
117-6-2401208 Petrol engine oil 5W-30 208L

Marine engines are often operated in harsh, saltwater environments that are much more demanding than the conditions faced by most automotive engines. Accordingly, their engine oil must be up to the task. Pro Star Super Premium Synthetic Blend 4 Stroke Oil is specifically designed for high performance 4 stroke outboards, gasoline inboards and stern drives. One of the first 4 stroke oils to be certified under NMMA’s new FC-W category. Meets or exceeds all criteria for viscosity, filter plugging, foaming and aeration. Successfully passed NMMA’s 100-hour general performance engine test.
Features
• Surpasses API requirements for SJ, CF-4 and CH-4.
• Premium, synthetic blend engine oil designed for 4 stroke highperformance outboards, gasoline inboards and stern drives.
• Additive package optimizes engine cleanliness, prevents sludge build up,
• Shear-stable polymer additives plus synthetic base stocks maintain proper viscosity under extremely harsh marine conditions.
• Synthetic/organic blend assures excellent low-temperature properties for quicker starts.
• Provides maximum protection in severe, high rpm applications.
• Marine engines typically operate at higher rpms than automotive engines, requiring an oil that is specifically designed and formulated to provide protection under these higher temperature, higher stress circumstances.


• FOR NISSAN, YAMAHA, TOHATSU, HONDA
Adaptor Fitting for Nissan/Yamaha/ Tohatsu and Honda Lower Unit.
Features
Adapters are made from brass and chrome plated to withstand the marine enviroment.
These adapters fit Lube Tube # 28600 and Lower unit quart pump # 27400.
Product

136-28401 Star brite Adaptor Fitting For Nissan, Yamaha, Tohatsu, Honda

Features
• Exceeds OEM warranty requirements Formulated to provide consistent (no-fade) performance in all marine trim and tilt applications.
• These products exceed all engine manufacturers specifications and are designed specifically for the marine environment.
• Enhanced to protect seals, hoses and other components from drying, cracking or corroding.
• Anti-foam, anti-wear, anti-oxidation and advanced stabilizing additives assure optimum performance in hydraulic trim tabs, power tilt and power steering systems.
• Viscosity: 8 - 10 cSt @ 100C - ISO 68

Synthetic Blend High Viscosity 80W 90 for API GL-5, MT-1 service SAE J2360, Mack GO-J. For long term performance synthetics are the best choice.
Features
• Special extreme pressure and anti-wear additives
• Recommended for all engines over 100 hp
• Protects against rust & corrosion; great thermal stability
• Recommended for all engines over 100 hp Protects against rust and corrosion.
• Refer to Manufacturer’s Engine Service Manual for flushing and filling instructions. If none are available: 1) Remove upper and lower plugs on lower unit gear case and completely drain old oil. 2) Install fill tube into lower hole. We recommend using Star brite Lower Unit Quart Pump (#27400, Lube Tube (#28600) and Adaptor (#28401, #28402) for easy installation. 3) Slowly refill unit with new lubricant until fluid appears at the lip of the upper hole. 4) Replace upper plug and tighten securely. 5) Remove fill tube from lower hole and replace lower plug. Tighten securely.

Superior rust and corrosion protection from salt water, salt air and atmospheric chemicals.
Features
• Recommended for corrosive marine applications - trailer wheel bearings, water pumps, hinges, pins, winches, anchor chain reels.
• Special water-insoluble formula is highly resistant to wash-out. N.L.G.I. #2.
High Viscosity Lower Unit Gear Lube 80W 90 for MIL-PSF-2105E, API MT-1, API GL-5, MACK GO-J, MACK GO-H.
Features
• Formulated with special anti-wear additives, rust and corrosion inhibitors.
• For lower units of all outboard motors and stern drives.


• Directions
• Refer to Manufacturer's Engine Service Manual for flushing and filling instructions. If none are available: 1) Remove upper and lower plugs on lower unit gear case and completely drain old oil. 2) Install fill tube into lower hole. We recommend using Star brite Lower Unit Quart Pump (#27400, Lube Tube (#28600) and Adaptor (#28401, #28402) for easy installation. 3) Slowly refill unit with new lubricant until fluid appears at the lip of the upper hole. 4) Replace upper plug and tighten securely. 5) Remove fill tube from lower hole and replace lower plug. Tighten securely.


Perfect for use in almost every vehicle over all types of terrain. Engine Ice is easy to use in the convenient 1/2 gallon bottle. Premixed to save you time, choose Engine Ice when you make your next coolant change.
• Superior heat reduction vs competition*
• Boil-over protection to 125c
• Freeze protection to -22c
• Superior corrosion protection**
• New oat technology
• Ready to use
* Independently lab-tested against leading competitive products.
** Compared to straight water without additives

Designed to meet the specific needs of the SXS & UTV machines, Engine Ice Hi-Performance SXS/ATV Coolant + Antifreeze is specially formulated to improve the performance of the highperformance SXS by providing excellent heat dispersion and maintaining optimum operating temperature. It provides superior corrosion protection when compared to water. Pre-mixed to save you time, choose Engine Ice when you make your next coolant change.
• Superior heat reduction vs competition*
• Boil-over protection to 125c
• Freeze protection to -33c
• Superior corrosion protection**
• New oat technology
• Ready to use
* Independently lab tested against leading competitive products.
** Compared to straight water without additives.

KEEP YOUR COOL NO MATTER HOW HOT THE COMPETITION OR HOW TREACHEROUS THE
When old man winter comes calling, you need extreme protection from freezing as well as the heat dissipation of a premium coolant. Engine Ice Hi-Performance Snowmobile & Winter Coolant and Antifreeze gives you the best of both worlds. Perfect for snowmobiles, snow bikes, UTVs, or anywhere you need extra low-temperature protection. And it still offers the excellent heat dispersion properties that Engine Ice has always provided. Engine Ice is easy to use in the convenient 1/2 gallon bottle. Pre-mixed to save you time, choose Engine Ice when you make your next coolant change.
• Superior heat reduction vs competition*
• Boil-over protection to 260f (127c)
• Freeze protection to -45f (-43c)
• Superior corrosion protection**
• New oat technology
• Ready to use
* Independently lab-tested against leading competitive products.
** Compared to straight water without additives.

K&N Air Filter Oil is the only oil specially formulated to work in combination with the cotton fabric in K&N air filter elements providing a superior air filtration system. When used as directed, it quickly penetrates the filter pleats, where it remains suspended in the cotton fabric. Saturation is maintained until the element is cleaned with K&N Air Filter Cleaner.

K&N Air Filter Oil is the only oil specially formulated to work in combination with the cotton fabric in K&N air filter elements providing a superior air filtration system. When used as directed, it quickly penetrates the filter pleats, where it remains suspended in the cotton fabric. Saturation is maintained until the element is cleaned with K&N Air Filter Cleaner.


K&N Recharger Kit is designed for cleaning your K&N oiled cotton air filter when it is time to be serviced. The kit comes with K&N Power Kleen air filter cleaner and air filter oil. Will restore air flow efficiency and will bring your K&N oiled cotton air filter to like new condition. K&N Power Kleen works to dissolve the dirt build up and old filter oil, and can be washed away with water. After the air filter fully dries re-oil your air filter then reinstall it. This Recharger Kit comes with a 204 milliliter aerosol spray can of oil and a 355 milliliter K&N pump bottle of Power Kleen air filter cleaner.

K&N Air Filter Oil is the only oil specially formulated to work in combination with the cotton fabric in K&N air filter elements providing a superior air filtration system. When used as directed, it quickly penetrates the filter pleats, where it remains suspended in the cotton fabric. Saturation is maintained until the element is cleaned with K&N Air Filter Cleaner.

When used as directed, it quickly penetrates the filter pleats, where it remains suspended in the cotton fabric. Saturation is maintained until the element is cleaned with K&N Air Filter Cleaner.


K&N Air Filter Cleaner is the only cleaner recommended to clean K&N cotton air filter elements. K&N Power Kleen works to dissolve the dirt build up and old filter oil, then it can be washed away with water. The use of any other cleaning solution can void your air filter's warranty. It is so good at cleaning greasy dirt and grime that it can also be used as an industrial strength degreaser by removing deposits from most surfaces including cotton air filters, painted surfaces, chrome, plastic and more!

K&N Power Kleen is the only cleaner recommended to clean K&N cotton air filter elements. K&N Power Kleen works to dissolve the dirt build up and old filter oil, then it can be washed away with water. The use of any other cleaning solution can void the filter's warranty. It is so good at cleaning greasy dirt and grime that it can also be used as an industrial strength degreaser by removing deposits from most surfaces including cotton air filters, painted surfaces, chrome, plastic and more!

20-99-0621
It works to dissolve the dirt build up and old filter oil, then it can be washed away with water. The use of any other cleaning solution can void the filter's warranty. It is so good at cleaning greasy dirt and grime that it can also be used as an industrial strength degreaser by removing deposits from most surfaces including cotton air filters, painted surfaces, chrome, plastic and more!

Power Kleen, Filter Cleaner, 32 Oz Trigger Sprayer
K&N air filter cleaner is the only cleaner recommended to clean K&N cotton air filter elements. It will bring your K&N oiled cotton air filter to like new condition. K&N Power Kleen works to dissolve the dirt build up and old filter oil, then it can be washed away with water. The use of any other cleaning solution can void the filter's warranty. It is so good at cleaning greasy dirt and grime that it can also be used as an industrial strength degreaser by removing deposits from most surfaces including cotton air filters, painted surfaces, chrome, plastic and more!

20-99-0640 K&N Power Kleen, Filter Cleaner, 5 Gallon
• Maintenance system for all K&N Filtercharger air filters
• Restores air flow efficiency
• Includes air filter cleaner and air filter oil
• The air filter cleaner comes in a pump bottle and the oil comes in a squeeze bottle


K&N Power Kleen works to dissolve the dirt build up and old filter oil, then it can be washed away with water. After the air filter fully dries re-oil your air filter then reinstall it. This Recharger Kit comes with an 8 ounce squeeze bottle of oil and a 12 ounce K&N pump bottle of Power Kleen air filter cleaner.

20-99-5050BK K&N Recharger Kit, Squeeze Oil- Black
K&N Sealing Grease provides an airtight fit around sealing surfaces on all types of air filter elements. It resists heat and will not melt or run off. K&N Sealing Grease is designed to maintain a seal in severe conditions. It is not to be used on clamp-on filter elements.


20-99-0703-1 K&N Sealing Grease, 1 Oz Tube
20-99-0704 K&N Sealing Grease, 6 Oz Tube
Will restore air flow efficiency and will bring your K&N oiled cotton air filter to like new condition. K&N Power Kleen works to dissolve the dirt build up and old filter oil, then it can be washed away with water. After the air filter fully dries re-oil your air filter then reinstall it. This Recharger Kit comes with a 204 milliliter aerosol spray can of oil and a 355 milliliter K&N pump bottle of Power Kleen air filter cleaner.
20-99-5003 K&N Recharger Kit, Aerosol Oil, (De/Fr/Nl/It/ Pt)


The Classic Starter Pack. The No-Toil Classic 3-pack gives you everything you need to perfectly maintain a filter. No-Toil Classic Biodegradable Filter Oil gives you the best protection, while No-Toil Biodegradable Cleaner makes cleaning your dirty a filter a breeze without solvents, and No-Toil Biodegradable Rim Grease ensures an air-tight seal of your filter on your air box.

No-Toil Air Filter Oil is the only 100% Biodegradable air filter oil on the market. Offer superior protection and combined with No-Toil Biodegradable Air Filter Cleaner makes the safest and easiest way to maintain your air filter


Designed to keep your air filter sealed tight against the air box to ensure that no dirt sneaks into your engine by the seal.

No-Toil Filter Cleaner is a concentrated formula designed to mix with water, no solvents are required to clean No-Toil treated filters! No-Toil Biodegradable Air Filter products are the fast, convenient way to maintain your air filters.


Keep your air filter clean, and you'll keep your engine running at top power and running longer. The System is the solution everything you need in a sturdy storage box with carrying handles, including the Twin Air Cleaning Tub, Oiling Tub, Dirt Remover and Liquid Power Filter Oil, plus Twin Air Contact Cleaner and gloves.


(IMO)
This resealable tub comes with a filter tray that allows dirt to sink to the bottom, away from your filter, and a second tray to keep your filter submerged.

including Cages Orange + Black
Submerge your clean filter in the tub, squeezing the foam until it is saturated. Then remove filter and squeeze excess oil back into the tub – ideal for oiling multiple filters. Then return oil to the original container for long term storage.

The original formula that set the standard of excellence in foam air filter oils. Many filter oils have a tendency to drain to one side, leaving part of your filter unprotected. Blue ORIGINAL Liquid Power starts thin for deep penetration, then dries evenly to microcoat the foam cell walls with a shield that repels dirt while accelerating airflow.


201-15-9015 Twin Air Liquid Power, Air Filter Oil (1 liter) (12) (IMO)
201-15-9016M Twin Air Liquid Power Spray, Air Filter Oil (500ml) (12) (IMO)
Formulated to quickly cut through ORIGINAL Liquid Power, loosen the dirt and flush your filter clean. Will not harden or damage filter foam like solvents and gasoline do.

201-15-9002

Like the Original Formula, green BIO Liquid Power microcoats the foam cell walls to prevent dirt, dust, mud and even water from entering your carburetor. Boost your bike’s performance with the first biodegradable air filter oil that works in all riding conditions, with the added convenience of wash-down-the-drain cleaning.

201-15-9017 Twin Air Liquid Bio Power, Air Filter Oil (1 liter) (12) (IMO)
201-15-9018M Twin Air Liquid Bio Power Spray, Air Filter Oil (500ml) (12) (IMO)

Clean your BIO Liquid Power-oiled filter with BIO Dirt Remover. Mixed with hot water, the granular cleaner quickly cuts through the filter oil. Hand-wash your filter in a bucket or sink – this water-soluble cleaner can go right down the drain without clogging or harming the environment.

This is the one grime-fighting super power to keep handy for cleaning your bike, tools and hands. Use these durable, damp, highly absorbent wipes to take on–bare-handed–heavy industrial grime including oil, grease, paints, glues, varnishes and sealants. They work without solvents, smell like eucalyptus, and don’t leave a sticky feeling. Tough on grime, gentle on hands. 70 WIPES PER PACK.



70pcs
If you’re a fan of the groundbreaking BIO Formula, we’ve saddled up Liquid Power and Dirt Remover in handy, handled packs for your go-anywhere convenience.

We’ve saddled up Liquid Power and Dirt Remover in handy, handled packs for your go-anywhere convenience.

Clean your airbox, cage and more with this fast drying formula that leaves no residue. Safe for plastic and painted surfaces.

This ready-to-use coolant provides long lasting protection of all metals inside today’s liquidcooled systems, without harming the water pump seals. It reduces and maintains the operating temperature to prevent overheating, offers the added assurance of an extreme freezing point (-26ºC / -14.8ºF) and boosts reliability. The coolant of choice for extreme off-road conditions as well as onroad usage yearround, in all climates. IceFlow is Mono Propylene Glycol-based, silicate-free and formulated with demineralized water – non-toxic, biodegradable and eco-friendly.
If you’re planning to ride in very extreme conditions, a bead of BIO Air Filter Sealant can provide that extra line of defense. It’s airtight, waterproof, dustproof and gritproof, and unlike grease, it will not dissolve under high heat or solidify in extreme cold.



Ideal for cleaning and maintaining bicycles, motorcycles, quads, scooters, go-karts.
• Instantly removes mud, insect marks and oily contaminants.
• Recommended for cleaning metal, plastic, rubber, painted and chrome parts.
• Eco-friendly: Contains no hydroxides, works perfectly with cold and hard water and is fully biodegradable (ECO).
• The OC1 motorcycle cleaner is your ideal partner for motorcycle care


Safely, powerfully and effectively cleans all surfaces of off-road motorcycles and MTB bikes without attacking them.
• The formula is based on the latest findings from the chemical industry and is environmentally friendly.

Ideal for the care and maintenance of rubber, synthetic and plastic surfaces.
• Perfectly polishes and renews, offers long-lasting protection against stains and water marks.
• Hydrophobic coating: creates a pearl effect and slows down the process of re-soiling.
• Environmentally friendly: Fully biodegradable (ECO).
• Protects against harmful effects of external factors such as UV radiation, moisture, salt, and chemicals
No water or detergent needed, this product works instantly. With its unique formula, it removes dirt and stains, masks small scratches and enhances the color of the surface. It also removes stubborn water stains, ideal for motorcycle and bicycle helmets, fairings, glasses and more.
• Easy to use
• Environmentally friendly and biodegradable
• Effective against dirt and stains
• Leaves a pleasant scent

• Hydrophobic Coating: Leaves a water-repellent coating that protects your vehicle from the elements.
• Long-lasting shine: Provides a lasting shine effect that always shows your vehicle in the best light
• After-wash corrosion inhibitor helps to protect your bike from the elements, making it an ideal winter protectant



Simple and effective solution for polishing and protecting elements of all types of motorcycles, bicycles, scooters and fairings. Its easyto-use formula leaves no greasy marks and light reflections, leaving a clean and shiny finish every time.


cleaning product specially developed for chains that thoroughly removes dirt, dried grease and residues of earth and sand. It is ideal for cleaning chains without O-rings, with O-rings, Z-rings, X-rings.
• Restores the drive to full efficiency and extends the life of the chain
• Safe to use, as it does not contain chlorinated solvents
• Immediately degreases the chain, making it easier to clean

"For a perfectly clean and clear view!"
The Lens Cleaner 100ml is an excellent liquid for cleaning lenses without streaking. Suitable for both smooth and porous surfaces, this versatile cleaner effectively removes handprints, grease stains, dirt and dust. It leaves an electrostatic film that limits re-soiling, keeping the lens clean for longer.
• No banding
• Effectively removes dirt and grease stains
• Leaves a protective film against renewed soiling
• Allergy-friendly and alcohol-free
"For a clear view at all times, no matter what the weather is like!"
OC1 Anti Fog 100ml is a versatile product that can be used on a wide variety of surfaces including windows, mirrors and lenses of all types. It is ideal for sports goggles, diving masks, safety goggles and even car glass. The solution dries quickly, leaving a micro-thin coating that prevents fogging.
• Prevents fogging and provides clear vision
• Easy application and quick drying
• Lasts up to five days
• Safe for all types of lenses
Lubricant specially developed for motorcycles that optimally lubricates and protects your chain and other moving parts. It is dust resistant, water and mud resistant, and transparent to let your chain shine in its natural state.
• Leaves long-lasting protective coating
• Protects against corrosion
• Water and mud resistant





"High-performance cleaning for your motorcycle exhaust!"
Our Exhaust Cleaner 0.25L is a powerful cleaning solution based on advanced nanotechnology. This specially developed formula is designed to instantly clean your motorcycle exhaust, reducing corrosion and dirt to restore it to its original lustrous shine. Application is very simple, just apply the cleaner to the surface, buff with a cloth and wipe away any residue. Perfect for removing stubborn dirt and rust from 2 and 4 stroke exhaust systems, motorcycle exhaust pipes, nuts and bolts.
• Immediate cleaning and protection against corrosion
• Removes stubborn dirt and rust
• Suitable for all metal types
• Easy to use



Ultra-delicate microfiber for waxing, sealants and quick detailers. The high weight ensures us safety when working with our products.



This shine and protection spray offers a long-lasting anti-static effect that is water and dirt repellent. This means your bikes stay cleaner after each use and are less prone to dirt and grime.
• Enhances color depth and provides a sparkling shine on metal, plastic, and rubber surfaces
• Restores an as-new finish after steam pressure and high-pressure washing
• Silicon-based formula is safe to use on plastic surfaces such as fairings, painted surfaces, dashboards, mudguards, fenders, side mirrors, and engines

Powerful cleaning agent specially formulated to improve the performance and longevity of your brakes. With its unique formula, it effectively removes deposits such as asphalt, tar, road dust, brake pads and oil stains that can affect braking performance.
• Usable on all brake parts and carbon fiber without leaving marks or stains.
• With a powerful aerosol spray that can be sprayed on heavily soiled areas and evaporates quickly.
• It also rehydrates disc brake pads to reduce brake squeal and extend disc brake life.




Quickly and easily cleans all parts of the bike without the need for scrubbing or harsh chemicals.
• Formula: Powerful cleaning formula that removes dirt, oil stains and bugs in an instant. Safe for All Parts and
• Surfaces: Will not damage carbon fiber, anodized metal, disc brake rotors and pads, seals, cables or other bike components.
• Corrosion Inhibitors: Lays down a protective layer to prevent future corrosion.

Hygiene and freshness - for a safe training experience! Introducing OC1 Fresh UP - the ultimate solution to maintaining a clean and hygienic training environment. With its advanced formula and refreshing fragrance, OC1 Fresh UP keeps your indoor trainers and fitness equipment free from germs and odors, guaranteeing a clean and healthy training experience.
• Kills 99.99% of germs
• Effective against enveloped viruses
• Lasts longer than alcohol-based sanitizers
• Safe for all surfaces

The ultimate solution for lubrication in difficult weather conditions. Our OC1 Chain Lube Wet 125ml is made with synthetic grease in the form of olive oil, enriched with additives that increase its water resistance. With its excellent properties, it can carry heavy loads and minimize wear on the lubricated elements, ensuring smooth and efficient operation.

Premium synthetic lubricant for excellent lubricity and corrosion protection. OC1 Chain Lube Dry is a premium synthetic lubricant designed to penetrate all areas of the chain and provide excellent lubricity and protection against corrosion, dust, dirt and grit. With its advanced formula, OC1 Chain Lube Dry withstands even the most extreme conditions that would normally cause other chain lubes to fail.


Safe and efficient sealing performance for all your bike rides! OC1 tubeless sealant is a premium quality product specifically formulated to meet the needs of high pressure road bikes and low pressure downhill, enduro and gravel racing bikes. It effectively seals porous tires and rim tapes and provides exceptional adhesion throughout the inside of the tire.


Effective protection for metallic threaded connections! Bolt Glue 10ml is a highly effective anaerobic adhesive specifically designed to secure medium strength threaded metal connections. This special adhesive bonds on contact with the metal surface in the absence of air, offers excellent corrosion protection and temperature resistance from -55°C to +150°C.
• Locking and sealing of nuts and bolts
• Prevents self-loosening due to vibrations
• Temperature resistant from -55°C to +150°C
• Resistant to light industrial oil spills

High-performance dry lubricant for extreme requirements. OC1 Chain Lube Wax is a high quality chain lubricant specially developed for extreme lubrication requirements. This premium lubricant provides exceptional protection and reduces wear on your bike chain to ensure optimal performance in the toughest conditions. With its advanced wax formula, it achieves a wear reduction of over 80%, which significantly extends the life of your chain compared to traditional lubricants.

The device is very comfortable and ergonomic. Recommended for work in workshops. The efficient hand pump ensures high pressure, thanks to which the sprayer has a sufficiently long range.

Protect your materials and leather from dirt!
OC1 Waterproofing Spray is a powerful and easyto-use protective spray designed to keep your materials and leather dirt-free. The spray creates an invisible and breathable protective film that prevents dirt from adhering and is water-repellent at the same time. The spray offers long-lasting protection and is easy to use, making it an indispensable tool for every biker.
• Creates an invisible and breathable protective film to prevent adhesion of dirt
• Long-lasting effect to protect against soaking, evaporation from cold, and UV radiation bleaching
• Suitable for use on hardshell clothing and down-filled garments

OC1 Extra Adhesive Remover 500ml is a powerful solution designed to effectively remove various substances such as grease, tar, oil, wax, ink, resin, stickers and adhesive residues from treated and untreated surfaces. Be it metal, wood, stone or various plastics, this versatile product gets the job done.
• Powerful adhesive remover for the effective removal of grease, tar, oil, wax, ink, resin, stickers and adhesive residue
• Suitable for use on treated and untreated surfaces including metal, wood, stone and various plastics
• Citrus-based formula dissolves grease and cleans surfaces easily
• Non-corrosive formulation safe for most metal surfaces, plastics and carbon

High-quality hydraulic oil based on mineral oil. Every HYMEC is filled with MAGURA Blood. Container size: 100 ml and 1 Litre

363-072-1820 Magura Blood clutch oil 100ml
363-072-1821 Magura Blood clutch oil 1L
Is a high-quality brake/hydraulic fluid made from mineral oil. Recommended to use with MAGURA rim, disc brakes and for the maintenance of dropper posts.

Product
363-270-2138 MAGURA Royal Blood, 1000ml
LCF 600 Plus fluid is commercially available, although it is recommended for track use: since it has a high hygroscopic level, it has a limited lifespan. This depends on several factors, but it usually ranges from 2,000 to 4000 km (1242 to 2485 miles). It can be mixed with other DOT3 and DOT4 racing fluids but should not be used in brake systems with magnesium part


The Brembo Sport Evo 500++ DOT4 fluid, on the other hand, has a dry boiling point of 270°C (518° F) and is recommended for road use without compromising performance. Its excellent properties help it to reach a high mileage before it has to be replaced, usually from 12,000 to 24,000 km (7456 to 14912 miles). However, it is not for brake systems designed for mineral fluids.

• Exclusively for racing use
• Brembo Racing HTC 64T has been specifically formulated to provide the highest performance under all racing conditions

55-086-001
Front Fork KYB Oil 02M 1L
55-086-005 KYB Front Fork KYB Oil 02M 5L
55-086-020 KYB Front Fork KYB Oil 02M 20L



KYB K2C SHOCK OIL is specifically designed to be only used in shock absorbers with the highest demands for optimal performance. KYB oil is recognised by OEM manufacturers all over the world to be oil of the highest quality and therefore the go-to oil for them.
• A super stable viscosity
• Excellent anti-friction properties
• Optimal ageing resistance
• Reduction of excessive foaming





TECHNICAL SUSPENSION GREASE

Product number Product
453-G597000500 Showa Technical Suspension Grease 500gr.


Product number Product
453-L598005001 Showa FF OIL SS05 (15,1 CST at 40ºC) 1 Liter
453-L598005005 Showa FF OIL SS05 (15,1 CST at 40ºC) 5 Liters

Product number Product
453-L598025001 Showa RR OIL SS25 (3,63 CST at 40ºC) 1 Liter
453-L598025005 Showa RR OIL SS25 (3,63 CST at 40ºC) 5 Liters

Product number Product
453-L598A15001 Showa FF OIL A1500 (15,3 CST at 40ºC) 1 Liter
453-L598A15005 Showa FF OIL A1500 (15,3 CST at 40ºC) 5 Liters

OEM specified. For dealership warranty requirements, Supra Black ensures extended drivetrain warranty compliance. Fast-curing formula. Sensor-safe, low odor, noncorrosive. Meets performance specs of OE silicone gaskets. Retains high flexibility, oil resistant properties through use of a patented adhesion system. Temperature range -70°C to 260°C intermittent; resists auto and shop fluids and vibration.

Permatex’s Medium-Strength Threadlocker Blue is ideal for all nut and bolt applications 1/4 to 3/4 (6mm to 20mm). Threadlocker Blue eliminates need for stocking expensive lock nuts and lock washers and locks and seals while preventing parts loosening due to vibration. Protects threads from corrosion. Threadlocker BLUE is easily removable with hand tools for easy disassembly. The Gel formula provides “liquid-reliability” without drips, globs, mess or waste and is available in convenient dispensing systems: choose GEL TWIST® pin-point applicator or the GEL SQUEEZE® applicator. (Mil-S-46163A, Type II, Grade N).

OEM specified. For high operating temperatures common in 4-cylinder, turbocharged or high-performance engines. The most advanced, high temp RTV silicone gasket available. Sensor-safe, low odor, noncorrosive. Superior adhesion. Three times more oil resistant than conventional silicones; eight times more flexible than cut gaskets.
Temperature range -70°C to 350°C intermittent; resists auto and shop fluids and vibration.

The #1 selling, biodegradable, waterless, petroleum solvent-free hand cleaner that contains no harsh chemicals, petroleum solvents or ammonia that can sting cuts or abrasions. Pure, fresh-smelling natural citrus power does the cleaning. Fortified with aloe, lanolin, glycerin, and other skin conditioners to soothe raw, rough hands. Fine Pumice deep cleans the toughest dirt. Works great on laundry stains (smooth lotion only), scuff marks, tile floors, pet odors and many other household cleaning needs.
OEM specified. For high operating temperatures common in 4-cylinder, turbocharged or high-performance engines. The most advanced, high temp RTV silicone gasket available. Sensor-safe, low odor, noncorrosive. Superior adhesion. Three times more oil resistant than conventional silicones; eight times more flexible than cut gaskets.
Temperature range -70°C to 350°C intermittent; resists auto and shop fluids and vibration.





Renthal Quick Bond Grip Glue is a fast acting liquid adhesive, chemically engineered to bond Renthal grips to all handlebars in a matter of minutes. Specially formulated to allow users to apply glue to bar and grip, fit the grip and position into the best position before creating a safe and secure bond between the grips and handlebar. Due to the Quick Bond formula that makes up Renthal Quick Bond Grip Glue, users are recommended to fit grips individually and only apply glue when the grip is ready to be fitted. Renthal Quick Bond Grip Glue is individually packed in a 20g resealable bottle.


9-1-12067-2 Nitrile Gloves Black M (50-pack)
9-1-12067-3 Nitrile Gloves Black L (50-pack)
9-1-12067-4 Nitrile Gloves Black XL (50-pack)



ODI Grip Glue is designed to bond grips to bars without damaging the grips. 5ml single shot tube is enough to install one pair of grips.
ODI Grip Glue - 5ml Tube

Grip glue from Ariete!
• Dries in 30 to 90 seconds
• High viscosity
• Packaging of 20 gr
• Read and follow description instructions carefully


• FIM approved
201-17-7769 Twin Air Pit Mat (180X80cm = FIM Dimensions) = Rubber with Polyester 250g/sqm
201-17-7769N Twin Air Pitmat 210X100cm FIM Rubber with Polyester 250g/sqm
201-17-7769XL Twin Air XL Pit Mat (250X190cm) Velour PA, Latex backing


•
• not FIM approved

•
• not FIM approved

Oilfilter wrench

9-1-05180 Hyper oilfilter wrench 65/67/14-k
9-1-05181 Hyper oilfilter wrench 68/14-k
9-1-05186 Hyper oilfilter wrench 76/14-k
9-1-05197 Hyper oilfilter wrench 76/12-k Bmw
9-1-72654 Forte Oil filter wrench, 68-69mm 14-sides
Oil filter wrench

• 16-pcs set
9-1-12730 Hyper Oil filter wrench set 16-pcs ®

9-1-12457 Hyper Oil filter wrench 60-115mm




Small accessories are often the most useful. Now you can prepare your oil/fuel mix with the help of Polisport Oil Mixer Bottle. It comes with a scale to help you prepare the mix, the mixer is available in two different capacities, 250 ml / 8.5 oz and 125 ml / 4.22 oz.
179-8152500001





Plastic oil beakers to make the maintenance of your motorbike. They come in different sizes with the same durable and resistant plastic compound.
179-8453300001 1000 ml / 0.26 gal.
179-8453300002 500 ml / 0.13 gal.
179-8453300003 250 ml / 0.06 gal.
179-8453300004 100 ml / 0.026 gal.




391-174X050 TMV Oil Measure Can 1Ltr (with Cap)
391-174X060 TMV Oil Measure Can 3Ltr (with Cap)
391-174X070 TMV Oil Measure Can 5Ltr (with Cap)
391-174X080 TMV Oil Measure Can
Spout-Length 18.5cm - Dia 2.6cm
Product

9-1-12149



391-174X036 TMV Oil Measure Bottle 1000cc
391-174X044 TMV Oil Measure Bottle 100cc (With Cap)
391-174X045 TMV Oil Measure Bottle 250cc
391-174X035 TMV Oil Measure Bottle 500cc


Filling can 1L has a red color and it is manufactured in Finland. Excellent in filling the oil in small engines such as lawn mower. Made in Lohja. 13,5x24,5x19 cm. Made from recycled plastic.


Homologated Jerry
Filling can 1L has a red color and it is manufactured in Finland. Excellent in filling the oil in small engines such as lawn mower. Made in Finland. 13,5x24,5x19 cm. Made from recycled plastic.

Natural color measuring jug with graduated scale is made of polypropylene. Measuring jug has a capacity of 2 liters, and its scale is dl. Measuring jug can withstand prolonged use of -20 to + 100 ° C. Measuring jug is resistant to solvents and other chemicals. Does not drip! And it is very accurate to pour. Large handle makes the jar can easily be handled even while wearing gloves. Made in Finland.








FEATURES
• Certified as a portable fuel container for Europe
• Complies with ADR standards
• Highly durable and leak-proof cap and walls
• Includes Transportation Cap and Hose or Quick Fill Spout
• Ergonomically designed handle for transport
• Two handle design to help the filling process
• Reinforced ribbed bottom
• Oil/Fuel Mixer Included and attached to the Fuel Jug
• Free area to customize with name and/or number
• Oil/Fuel mix gauge on the cap to identify the fuel mix
• Non-slip bottom

AUTO SHUT-OFF IN BOTH FILLING SYSTEMS in order to prevent fuel spilling


Spare Parts & Accessories
179-8152800001 Polisport Quick Fill Spout
179-8152700001 Polisport Fill Hose + Bender + cap for ProOctane
179-8152700002 Polisport Fill Hose + Bender for ProOctane
179-8152500001 Polisport ProOctane Mixer 250 ml with scale
179-8152600001 Polisport ProOctane Mixer 125 ml with scale
179-8155200001 Polisport o-rengassarja ProOctane kanisteriin

• High Capacity Design Great for Work or Big Toys
• 14 Gallon High Capacity Container
• Siphon & Gravity Driven Action Fuels Equipment
• Intelligent Design w/ Multiple Valves, Vented Cap & Strap Supports
• Long reach with 10ft Hose & Built In Handles


• Reliable Scepter quality in an excellent value
• Easy to Transport
• Compact Design for Convenient Under-Seat Storage
• Made of UV Stabilized, Rust and Corrosion Resistant HDPE for Maximum Durability
• Combination Fuel / Sight Gauge
• 2-Way Vented Cap


• Top Integrated Carrying Handle make it Easy to Transport
• Compact Design for Convenient Under Seat Storage
• Made of UV Stabilized, Rust and Corrosion Resistant HDPE for Maximum Durability
• Standard Marine Cap with Manually Vented Screw




• Includes the Gas Can Cap, Stopper, Vent Cap and spout.
• Replacement parts for Scepter Gas Cans (Canadian & International Only)



Get ready to elevate your fluid-handling experience with the Tuff Jug - where durability meets convenience in a uniquely exciting way!
• Approved for long time fuel storage
• Auto-Stop, No Spilling!
• Clear View Strip
• No Leaky vents
• Fastest Fill Rates
• Side Handle
• Multi-layer HDPE
The Ripper Cap isn't just fast, it's the Fastest Pouring Cap option on the market- pouring 5 gallons in a mindblowing 42 seconds! No more overfilling or spilling, thanks to the built in automatic fluid cutoff technology. Say goodbye to the waiting game and hello to Instant Fluid Transfer like never before.
981-5010-006 Black w/ Orange Cap
981-5010-020 Red w/ Black Cap
981-5010-030 Kawi Green w/ Black Cap
981-5010-040 Blue w/ Black Cap
981-5010-100 White w/ Black Cap
981-5010-102 White w/ Red Cap
981-5010-330 Forest Green w/ Black Cap







981-5020-020 Red w/ Black Cap
981-5020-030 Kawi Green w/ Black Cap
981-5020-040 Blue w/ Black Cap
981-5020-060 Orange w/ Black Cap
981-5020-100 White w/ Black Cap
981-5020-102 White w/ Red Cap
981-5020-330 Forest Green w/ Black Cap










Unique to Tuff Jug, the Auto-stop Spout is internally vented to provide both the Fastest Flow and Auto Shutoff, all in one. The internal venting system removes the need for external jug vents that can break or allow fluids to spill out the side of your container when filling.


Kit (GEN 3) 981-3009-2 Ripper Cap Seal/Grease Kit (GEN 2)
981-3000 Large Cap Seal (GEN 1/2)
981-6000 Standard/Ripper/Smart Cap Seal (GEN 3)
Auto-stop Spout is internally vented to provide both the Fastest Flow and Auto Shutoff, all in one. When you use the Autostop Spout you will eliminate overfilling and spilling as fluids stop flowing automatically after reaching the end of the spout.


The Standard Cap arrives molded with a 1” NPT thread and plug, giving you a head start on customization.





Product number Product
981-3006 Red Ripper Cap

The Ripper Cap isn’t just fast, it’s the Fastest Pouring Cap option on the marketpouring 5 gallons in a mind-blowing 42 seconds! That’s up to 500% faster than a standard 5 gallon fuel container!
Product number Product
981-6010-00 10L
981-6020-00 20L


Product number Product
981-3001 Adapter 981-3002 KTM Adapter
