Oils, lubricants & chemicals - 2023

Foreword

In 2023 we celebrate our 40th anniversary! It’s “Damn good fun” that you are with us on this journey.

With summer just around the corner, it's important to make sure that your vehicle or equipment is ready for the season.

We strive to bring you the best selection of high-quality oils and maintenance & care products from trusted brands. Each of these brands offers high-quality oils that are designed to meet the needs of modern engines and ensure optimal performance and longevity.

We are also excited to announce four new brands to our selection: Repsol, Greentek, Permatex, and Motip.

Best Regards Team Duell

4-STROKE MOTOR OILS

RACING

These lubricants are designed for those who are looking for excellence, are committed to the cutting edge, and know the technology behind the creation of the Racing range, a lubricants range that has been 20 times world champion in official competitions.

• Greater stability of the oil against oxidation and formation of deposits, minimizing the problem of pre-ignition

• Greater resistance to oxidation, maintaining properties better during its service life ––> greater engine life.

• Greater driving power and coupling to the clutch. Guarantees maximum performance of the most powerful engines thanks to the excellent stability of the oil at high temperatures and speeds.

553-1000-0001

553-1008-0001

553-1018-0001

553-1021-0001

553-1021-0004

MASTER RACING

POLARIS ATV OIL. Synthetic lubricant oil specifically designed to cover the needs of high performance engines. MASTER RACING 5W-50 is a result of the experience accumulated by the Repsol racing teams, and its carefully studied formula optimises the resistance to oxidation of the different engine parts, prevents the formation of deposits and favours good performance at low temperatures. It is a perfect lubricant for powerful vehicles used daily in any environment and circumstances.

Fully synthetic / API SN/CF

553-1150-0001

4-STROKE MOTOR OILS CONTINUES...

SMARTER

The Smarter range is developed for customers who rely on their motorcycles or scooters as their usual means of urban or intercity transportation.

• For motorcyclists who seek practicality in driving and fuel economy without sacrificing the high quality and protection of their engines.

• They guarantee soft couplings to the clutch that allow strong starts after being stopped, even with motorcycles equipped with DCT systems.

• They are compatible with three-way catalytic converters, to comply with Euro 5 standards.

V-Twin Custom: Fully synthetic Smarter V-Twin: Mineral API SN API SL JASO MA2 JASO MA2

Smarter Scooter: Fully synthetic Smarter Sport: Synthetic blend API SN API SL JASO MA2 JASO MA2

Hmeoc Smarter Synthetic JASO T 903:2016 MA2* API SN API: SL JASO T 903:2016 MA2*

553-1066-0001 Repsol Smarter V-Twin Custom 4T 20W-50 1L (12)

553-1066-0060 Repsol Smarter V-Twin Custom 4T 20W-50 60L

553-1066-0208 Repsol Smarter V-Twin Custom 4T 20W-50 208L

553-1063-0001 Repsol Smarter V-Twin 4T 20W-50 1L (12)

553-1054-0001 Repsol Smarter Sport 4T 10W-40 1L (12)

553-1054-0004 Repsol Smarter Sport 4T 10W-40 4L (5)

553-1054-0208 Repsol Smarter Sport 4T 10W-40 208L

553-1045-0001 Repsol Smarter Synthetic 4T 10W-40 1L (12)

553-1045-0004 Repsol Smarter Synthetic 4T 10W-40 4L (5)

553-1045-0208 Repsol Smarter Synthetic 4T 10W-40 208L

553-1033-0001 Repsol Smarter Scooter 4T 5W-40 1L (12)

553-1033-0208 Repsol Smarter Scooter 4T 5W-40 208L

553-1039-0001 Repsol Smarter Hmeoc 4T 10W-30 1L (12)

553-1039-0004 Repsol Smarter Hmeoc 4T 10W-30 4L (5)

RIDER

Our range of Rider lubricants is designed by and for true lovers of two and three-wheeled vehicles. Versatile and affordable products, with the best quality and at the best price.

• High-quality mineral lubricants that guarantee great engine protection during the entire oil change period.

• The option for those looking for affordable products with the best guarantee and quality.

553-1072-0001

553-1072-0004

553-1072-0208

553-1075-0001

553-1075-0004

553-1081-0001

553-1081-0060

553-1081-0208

• This range includes High Mileage products optimized for older motorcycles and formulated to provide maximum engine and transmission protection for all types of two and three-wheeled vehicles (motorcycle taxis, tuc-tuc...), and any other small combustion vehicles

Mineral / API SL / JASO MA2

2-STROKE MOTOR OILS

RACING MIX

High-performance mineral lubricant that is suitable for a wide variety of two-stroke engines. This engine oil is the perfect choice for gardening and forestry applications such as chainsaws and lawnmowers. The Mix 2T is a clean oil that takes care of the engine, protects all metallic pieces from wear and corrosion and offers optimal lubrication for the combustion chamber.

Synthetic blend

553-1027-0001 Repsol Racing Mix 2T 1L (12)

553-1030-0001 Repsol Racing Off Road 2T 1L (12)

SMARTER SYNTHETIC

It is essentially suitable for high performance small cylinder capacity 2-stroke engines. Its formulation protects the engine against the formation of deposits in the exhaust and the degradation of engine components. It is suitable for both premix and for injector lubrication system engines. It is perfectly suitable for all types of 2-stroke motorcycles in their very varied disciplines.

Synthetic blend / TC, FD

Productnr

553-1069-0001

RIDER TOWN

FORK OIL

QUALIFIER FORK OIL

A high-performance hydraulic oils for motorcycle forks and shock absorbers. Fully synthetic / DIN

Mineral / TC, FD

Smarter Synthetic 2T 1L (12) Productnr

553-1093-00005

553-1093-0001

553-1093-0020

Lubricant oil for general use in 2-stroke engines. It is suitable for a wide range of motorcycles and is mainly recommended for urban use. It is a clean oil, which cares for the engine and always keeps the exhaust vents clean. In addition, it supports very high temperatures produced by intensive use in city traffic, or as a consequence of carrying a passenger on a scooter or a small cylinder capacity motorcycle.

Rider Town 2T 500ml (24)

Rider Town 2T 1L (12)

Rider Town 2T 20L

TRANSMISSION OIL

NAVIGATOR HQ

Extreme Pressure monograde lubricant oil, recommended for use in differentials/ rear axles of vehicles or in hypoid and helicoidal transmission systems. Also suitable for use in gearboxes and other gear assemblies working in very severe service conditions.

Mineral / API: GL-5

NAVIGATOR AWD

Synthetic multigrade lubricant oil, with high thermal stability, recommended for auto-locking transmissions or limited slip differentials (LSD) working under extreme pressure conditions, contact loads and slip characteristic of vehicles used for driving sports.

Fully synthetic / API GL-5, LSD

QUALIFIER TRANSMISSION

A lubricating oil formulated to lubricate motorcycles and gearboxes. It has excellent shear stability and ensures that wet clutches operate with perfect slipping control in extreme conditions.

Fully synthetic

10W-40: API SL / JASO T-903:2016 MA2*

80W-90: API GL-4

75W: API GL-4/GL-5

NAVIGATOR LSD

It is an extreme pressure multigrade oil lubricant, recommended for use in limited slip differentials and drive axles for public works vehicles and four-wheel-drive all-terrain vehicles where fluids with LSD (limited slip differential) characteristics are needed. They may also be used in non-limited slip differentials which require an API GL-5 quality level.

Mineral / MIL: L-2105-D API: GL-5, LSD

BRAKE FLUID 4 & 5.1

QUALIFIER BRAKE FLUID DOT 4

Synthetic brake fluid designed for motorcycle hydraulic systems that are used in harsh conditions where a quality level of DOT 4 or DOT 3 is recommended.

UNE 26-109-88 FMVSS 116 DOT 3 Y DOT 4 SAE J1703, J1704 ISO 4925

QUALIFIER BRAKE FLUID DOT 5.1

MARINE

SAILOR OUTBOARD & JET SKI

Lubricant oil for high performance outboard 2-stroke engines. Its highly refined and exclusive additive mineral base formulation provides the highest performance in jet skis, in addition to securing the best protection against damp and corrosion. Its exceptional quality meets the NMMA TCW3 standard and enables you to obtain intense enjoyment at the controls of a powerful jet ski while ensuring maximum mechanical protection.

Mineral / NMMA, TC-W3

Synthetic brake fluid designed for motorcycles with hydraulic systems that are used in harsh conditions where a quality level of DOT 5.1 or DOT 4 is recommended.

UNE 26-409 SUBCLASE A FMVSS 116 DOT 5.1 Y DOT 4 SAE J1703, J1704 ISO 4925

SAILOR GASOLINE BOARD

Synthetic engine oil developed for all types of outboard and outboard-inboard watercooled 4-stroke petrol engines. Its composition provides excellent protection against corrosion and it is recommended by the majority of powerboat manufacturers. Its formula meets the strict NMMA FC-W standards for boat engines and ensures reliable sailing for the engine.

Fully synthetic / NMMA: FC-W/ FC-W(CAT), API, SM

OTHER PRODUCTS

QUALIFIER CLEANER & POLISH

Cleans and polishes all metallic, fiber, and plastic motorcycle parts. Removes dirt, grease, and insect remains without water.

BRAKE & PARTS CONTACT CLEANER

Degreaser for brake discs and pads. In addition, it removes grease, oil, dirt, brake liquid and other contaminants from any part of the motorcycle, leaving the surfaces clean and dry. It acts extremely fast on the area to be treated with no need to rub and it evaporates easily without leaving any traces.

Productnr

553-1129-00004

Productnr

DEGREASER & ENGINE CLEANER

Degreasing cleaner for motorcycle engines. Its great penetrating power enables oil, dirt and grease to be removed from all the engine´s metal parts. Its immediate action ensures easy cleaning after application.

SILICONE SPRAY

Silicone-based cleaning spray, which enhances the sheen on the rubber parts of the motorcycle. Specially designed to cover and protect all rubber, soft plastic and synthetic leather surfaces. It protects them from the sun and rain and restores their original lustre.

CHAIN OIL

QUALIFIER CHAIN

Aerosol lubricating oil, resistant to water, and capable of working at high temperatures, to keep chains and secondary transmissions in perfect conditions.

553-1123-00004

BRILLIANCE -MADEFOR RIDERS

4-STROKE MOTOR OIL

POWER SYNT 4T

Fully synthetic high-performance 4-stroke engine oil, specially developed for demanding use in hypersport motorcycles with powerful engines. These lubrications provide engines, gearboxes and clutches with optimum protection over the entire range of applications.

• aggressive power development

• optimum wear protection

• ideal for wet multi-disc clutches (JASO MA2 approval)

SAE 5W/40 JASO MA2 T903: 2011; API SN, SM, SL

SAE 10W/50 JASO MA2 T903: 2011; API SN, SM, SL

CROSS POWER 4T

Fully synthetic high-performance 4-stroke engine oil, especially developed for Off-Road motorcycles. When this oil was developed, in close cooperation with racing teams and motorcycle manufacturers, attention was paid to the specific requirements of Off-Road use.

• racing quality

• extremely good thermal and shear stability

• ideal for wet multi-disc clutches (JASO MA2 approval)

SAE 5W/40 JASO MA2 T903: 2011; API SN, SM, SL

SAE 10W/50 JASO MA2 T903: 2011; API SN, SM, SL

NEW

SAE 10W/60 JASO MA2 T903: 2006; API SJ, SH, SG

Productnr Product

552-166-001 Motorex Power Synt 4T 5W/40 1 ltr (10)

552-166-004 Motorex Power Synt 4T 5W/40 4 ltr (4)

552-169-001 Motorex Power Synt 4T 10W/50 1 ltr (10)

552-169-004 Motorex Power Synt 4T 10W/50 4 ltr (4)

552-169-020 Motorex Power Synt 4T 10W/50 20 ltr

552-169-060 Motorex Power Synt 4T 10W/50 60 ltr

552-169-200 Motorex Power Synt 4T 10W/50 200 ltr

552-172-001 Motorex Power Synt 4T 10W/60 1 ltr (10)

552-172-004 Motorex Power Synt 4T 10W/60 4 ltr (4)

552-172-020 Motorex Power Synt 4T 10W/60 20 ltr

552-172-060 Motorex Power Synt 4T 10W/60 60 ltr

20 ltr

NEW

SAE 10W/60 JASO MA2 T903: 2006; API SL, SJ, SH, SG; KTM LC4 2007+

Productnr Product

552-142-001 Motorex Cross Power 4T 5W/40 1 ltr (10)

552-142-004 Motorex Cross Power 4T 5W/40 4 ltr (4)

552-145-001 Motorex Cross Power 4T 10W/50 1 ltr (10)

552-145-004 Motorex Cross Power 4T 10W/50 4 ltr (4)

552-145-020 Motorex Cross Power 4T 10W/50 20 ltr

552-148-001 Motorex Cross Power 4T 10W/60 1 ltr (10)

552-148-004 Motorex Cross Power 4T 10W/60 4 ltr (4)

552-148-020 Motorex Cross Power 4T 10W/60 20 ltr

552-148-060 Motorex Cross Power 4T 10W/60 60 ltr

4-STROKE MOTOR OIL CONTINUES...

BOXER 4T

Synthetic high-performance engine oil, specifically for use in watercooled boxer engines. Guarantees a stable lubricating film and a constantly high oil pressure under all operating conditions and lowers the friction in the engine significantly.

• ideal for water/oil-cooled engines

• reduces oil consumption

• developed in close cooperation

JASO MA2 T903: 2011; API SN, SM, SL

TOP SPEED 4T

Modern synthetic high-performance engine oil for 4-stroke motorcycles. With this MC (Molecular Converted) technology highquality base oils are refined chemically and achieve a very high level of performance. Meets BMW requirements for the K1200, K1300 and K1600 Series plus the S1000 Series.

• excellent wear protection

• lowers oil consumption

• ideal for wet multi-disc clutches

(JASO MA2 approval)

SAE 5W/40 JASO MA2 T 903: 2016; API SL, SJ, SH, SG

SAE 10W/30 JASO MA2 T903: 2011; API SN, SM, SL

BOXER 4T

Synthetic high-performance engine oil, specifically for use in 4-stroke boxer engines. Guarantees a stable lubricating film and a constantly high oil pressure under all operating conditions and lowers the friction in the engine significantly.

• ideal for air/oil-cooled engines

• reduces oil consumption

• developed in close cooperation with the BMW tuner AC SCHNITZER

JASO MA T903: 2006; API SL, SJ, SH, SG

552-139-001

SAE 10W/40 JASO MA2 T903: 2011; API SN, SM, SL

NEW 20 ltr

SAE 15W/50 JASO MA2 T903: 2011; API SN, SM, SL

552-190-001 Motorex Top Speed 4T 5W/40 1 ltr (10)

552-190-004 Motorex Top Speed 4T 5W/40 4 ltr (4)

552-190-200 Motorex Top Speed 4T 5W/40 200 ltr

552-193-001 Motorex Top Speed 4T 10W/30 1 ltr (10)

552-193-004 Motorex Top Speed 4T 10W/30 4 ltr (4)

552-196-001 Motorex Top Speed 4T 10W/40 1 ltr (10)

552-196-004 Motorex Top Speed 4T 10W/40 4 ltr (4)

552-196-020 Motorex Top Speed 4T 10W/40 20 ltr

552-196-060 Motorex Top Speed 4T 10W/40 60 ltr

552-196-200 Motorex Top Speed 4T 10W/40 200 ltr

552-199-001 Motorex Top Speed 4T 15W/50 1 ltr (10)

552-199-004 Motorex Top Speed 4T 15W/50 4 ltr (4)

552-199-020 Motorex Top Speed 4T 15W/50 20 ltr

552-199-060 Motorex Top Speed 4T 15W/50 60 ltr

4-STROKE MOTOR OIL CONTINUES...

FORMULA 4T

Modern synthetic quality engine oil for 4-stroke motorcycles. They provide theengine, gearbox and clutch with goodprotection in all areas.

• good wear protection

• resistance at all temperatures

• for wet multi-disc clutches(JASO MA 2approval)

SAE 10W/40 JASO MA2 T903: 2016; API SL, SJ, SH, SG

SAE 15W/50 JASO MA2 T903: 2016; API SL, SJ, SH, SG

SAE 20W/50 JASO MA2 T903: 2016; API SL, SJ, SH, SG

20 ltr

NEW

LEGEND 4T

High-quality mineral-oil-based engine oil for 4-stroke motorcycles with separate engineand gearbox lubrication. Thanks to theselection of base oils and additives specially adapted for this engine type, this engineoil provides optimum protection againstwear and high temperature stability.

• high thermal stability

• optimum oil film, even at hightemperatures

• ideal for high-capacity two-cylinderengines

API SJ, SG/CF; ACEA A3/B3

20 ltr

Productnr Product

552-151-001 Motorex Formula 4T 10W/40 1 ltr (10)

552-151-004 Motorex Formula 4T 10W/40 4 ltr (4)

552-151-020 Motorex Formula 4T 10W/40 20 ltr

552-151-060 Motorex Formula 4T 10W/40 60 ltr

552-151-200 Motorex Formula 4T 10W/40 200 ltr

552-154-001 Motorex Formula 4T 15W/50 1 ltr (10)

552-154-004 Motorex Formula 4T 15W/50 4 ltr (4)

552-154-020 Motorex Formula 4T 15W/50 20 ltr

552-154-060 Motorex Formula 4T 15W/50 60 ltr

552-154-200 Motorex Formula 4T 15W/50 200 ltr

ATV QUAD 4T

Modern synthetic quality engine oil for 4-stroke ATV/Quads. This oil provides goodshear stability and very rapid lubrication,including at low temperatures.

• excellent wear protection

• very good cold starting characteristics

• for wet multi-disc clutches (JASO MA2 approval)

JASO MA2 T903: 2016; API SL, SJ, SH, SG

NEW

Productnr Product

552-163-001 Motorex Legend 4T 20W/50 1 ltr (10)

552-163-020 Motorex Legend 4T 20W/50 20 ltr

552-163-060 Motorex Legend 4T 20W/50 60 ltr

RACING PRO 4T

MOTOREX RACING PRO 4T 10W/40 CROSS is a mineral engine oil tailored specifically to the latest generation of four-stroke motocross bikes. It meets all the requirements of Yamaha, Suzuki, Kawasaki and Honda for use in their factory bikes and motocross models. Even under the toughest racing conditions it offers your engine the best wear protection possible and also guarantees maximum clutch protection. Thanks to its lubricating properties, RACING PRO 4T 10W/40 CROSS is the perfect engine oil for high temperatures.

Productnr

4-STROKE MOTOR OIL CONTINUES...

4-STROKE 10W/40

Productnr Product

552-205-004 Motorex 4-Stroke 10W/40 4 ltr (4) 552-205-060 Motorex 4-Stroke 10W/40 60 ltr

SCOOTER FORZA 0W/30

SCOOTER FORZA 5W/40

PERFORMANCE LEVEL

TOP SPEED 5W/40

TOP SPEED 10W/30

TOP SPEED 10W/40

TOP SPEED 15W/50

JASO MA SN, SM, SL

• VW-NORM

• SN, SM, SL

• JASO MA2 SN, SM, SL

• JASO MA2 SN, SM, SL

• JASO MA2 SN, SM, SL

• JASO MA2 SN, SM, SL PERFORMANCE LEVEL

FORMULA 10W/40

FORMULA 15W/50

FORMULA HD 20W/50

ATV QUAD 10W/40

SCOOTER 5W/30

SCOOTER 10W/30

SCOOTER 10W/40

PERFORMANCE LEVEL LEGEND 20W/50

PERFORMANCE LEVEL

KTM RACING 20W/60

BOXER 5W/40

BOXER 15W/50

PERFORMANCE LEVEL

RACING PRO 4T 0W/40

RACING PRO 4T 5W/30

RACING PRO 4T CROSS 10W/40

RACING PRO 4T 15W/50

JASO MA2 SL, SJ, SH, SG

JASO MA2 SL, SJ, SH, SG

JASO MA2 SL, SJ, SH, SG

JASO MA2 SL, SJ, SH, SG

JASO MB JASO T 903: 2016

JASO MB SL, SJ, SH, SG

SL, SJ, SH, SG

SJ, SG/CF

SL, SJ, SN

JASO MA2 SN, SM, SL

JASO MA SL, SJ, SH, SG

2-STROKE MOTOR OIL

POWER SYNT 2T

Fully synthetic high-performance engine oil for 2-stroke supersport motorcycles. This lubricant offers optimum performance and maximum protection as well as extremely clean combustion.

• optimum protection against wear

• low-smoke formula

• for pre-mix and separate lubrication

JASO FD, API TC, ISO-L-EGD

Productnr Product

552-106-001 Motorex Power Synt 2T 1 ltr (10)

CROSS POWER 2T

Fully synthetic high-performance engine oil for 2-stroke Off-Road motorcycles. When this oil was developed – in direct cooperation with racing teams and motorcycle manufacturers – special attention was paid to the specific demands of OffRoad use.

• racing quality

• reduces combustion residues

• for pre-mix and separate lubrication

API TC, ISO-L-EGD, Safety + Performance: JASO FD

Productnr Product

552-100-001 Motorex Cross Power 2T 1 ltr (10)

552-100-004 Motorex Cross Power 2T 4 ltr (4)

FORMULA 2T

Modern synthetic engine oil for 2-stroke motorcycles. It offers the engine good protection in all areas of use.

• minimal combustion residues

• especially low smoke

• for pre-mix and separate lubrication

JASO FC, API TC, ISO-L-EGC

Productnr Product

552-103-001 Motorex Formula 2T 1 ltr (10)

SCOOTER 2T

Synthetic 2-stroke engine oil for scooters. Points taken into special account during its development were the specific demands placed on scooters in daily use, with frequent cold starts and high operating temperatures.

• low-smoke formula

• ideal for stop-and-go traffic

• for pre-mix and separate lubrication

JASO FC, API TC, ISO-L-EGC

Productnr Product

552-109-001 Motorex Scooter 2T 1 ltr (10)

552-109-004 Motorex Scooter 2T 4 ltr (4)

SCOOTER FORZA 2T

Modern fully synthetic 2-stroke engine oil for scooters. Points taken into special account during its development were the high demands placed on scooters in daily use, with frequent cold starts and high operating temperatures. Ideal for models with injection engines and catalytic converters.

• low-smoke formula

• reduces combustion residues

• for pre-mix and separate lubrication

JASO FD, API TC, ISO-L-EGD, Safety + Performance: PIAGGIO HEXAGON

Productnr Product

552-112-001 Motorex Scooter Forza 2T 1 ltr (10)

2-STROKE

Productnr Product

552-115-001 Motorex 2-Stroke 1 ltr (12)

TRANSMISSION OIL

RACING GEAR OIL

High-performance gear oil. Extremely good resistance to pressure. For separately lubricated gearboxes and clutches. Is highly efficient against clutch wear.

552-229-001 Motorex Racing Gear Oil 10W/40 1 ltr (12)

TRIAL GEAR OIL

A fully synthetic transmission oil designed for the specific requirements seen on trial motorcycles. In trial motorcycles, the clutch and transmission are put under particularly high stress.

GEAR OIL

Synthetic performance. Special transmission oil for separately lubricated gearboxes in 2-stroke motorcycles. Also excellently suited for Vespas. Makes for a clean separation of clutch discs. Reduces the effort required to select gears.

API GL-4

552-331-001 Motorex Gear Oil Universal Sae 85W/140 Gl-5 1ltr (12)

552-333-001 Motorex Gear Oil 10W/30 1 ltr (10)

552-333-004 Motorex Gear Oil 10W/30 4 ltr (4)

PENTA GEAR OIL

Fully synthetic, high-performance gear oil. The high-quality base oils and specially coordinated additives guarantee high thermal stability. Has critical reserves even under extreme loads.

552-335-001

SAE 75W/90: API GL-5, Safety + Performance: ZF TE-ML-05B; -07A; -08; -12B; MB 235.8; MAN 342 S1; SCANIA STO 1:0; VOLVO 97312

SAE 75W/140: API GL-5, Safety + Performance: ZF TE-ML-05B; -07A; -08; -12B; VOLVO 97312; SCANIA STO 1:0

ATF DEXRON III

Automatic transmission fluid. Excellent performance in cold conditions and in respect of ageing.

API GL 4+5

Productnr Product

552-330-001 Motorex Atf Dexron III 1 ltr (10)

PRISMA ZX

Special synthetic gear oil. Provides an excellent gear-changing performance. For motorcycles with separately lubricated gearboxes and for universal joint transmissions and hypoid gears.

API GL 4+5

Productnr Product

552-342-001 Motorex Prisma Zx 75W/90 1 ltr (10)

HYPOID

Peak-pressure transmission oil for motorcycle gear and universal joint lubrication.

API GL-5

Productnr Product

552-339-001 Motorex Hypoid 80W/90 1 ltr (10)

552-339-004 Motorex Hypoid 80W/90 4 ltr (4)

552-339-025 Motorex Hypoid 80W/90 25 ltr

SCOOTER ZX

Semi-synthetic, special gear oil for scooters. Ideal for continuous drives. Optimum coefficient of friction.

Productnr Product

552-345-0001 Motorex Scooter Zx 80W/90 130 ml (12)

SNOWMOBILE OIL

SNOWMOBILE ADVENTURE 2T

SNOWMOBILE ADVENTURE 2T is a semisynthetic, two-stroke snowmobile motor oil. Thanks to its innovative formula, the product offers outstandingly good wear protection and ensures low-residue combustion.

JASO FD; ISO-L-EGD; API TC; ROTAX 253 Performance Level

Productnr Product

552-250-001 Motorex Snowmobile Adventure 2T 1 ltr (10)

552-250-004 Motorex Snowmobile Adventure 2T 4 ltr (4)

SNOWMOBILE POLAR SYNT 2T

SNOWMOBILE POLAR SYNT 2T is a fully synthetic, two-stroke snowmobile motor oil. This two-stroke motor oil offers outstanding wear protection and also ensures residuefree combustion under the most extreme temperature conditions.

JASO FD; ISO-L-EGD; API TC; ROTAX 253 Performance Level

Productnr Product

552-253-001 Motorex Snowmobile Polar Synt 2T 1 ltr (10)

552-253-004 Motorex Snowmobile Polar Synt 2T 4 ltr (8)

SNOWMOBILE POLAR SYNT 4T

SNOWMOBILE POLAR SYNT 4T SAE

0W/40 is a fully synthetic, high-performance special oil specifically developed for use in snowmobiles. It exhibits extremely good temperature resistance and shear strength, thereby effectively reducing engine wear.

API SM; SL; SJ

Productnr Product

552-256-001 Motorex Snowmobile Polar Synt 4T 0W/40 1 ltr (10)

552-256-004 Motorex Snowmobile Polar Synt 4T 0W/40 4 ltr (4)

BRAKE FLUID

RACING BRAKE FLUID

• High-performance brake fluid.

• Ex-tremely high dry and wet boiling points (563°F/383°F, 295°C/195°C).

• Easily ex-ceeds DOT 4 specifications.

COOLANT

COOLANT M3.0

Coolant based on ethylene glycol provides excellent protection for all modern engines but particularly aluminium engines operating under high loads. Free of silicates, nitrates, amines and phosphates (OAT technology). Colour pink.

RAKE FLUID DOT 4

High-performance brake fluid with a wet boiling point of more than 165 °C (329 °F). Prevents the formation of vapour even at extreme braking loads. Provides optimum braking performance and responsive braking.

BRAKE FLUID DOT 5.1

High-performance brake fluid for hydraulic brakes. Extremely high wet boiling point of more than 180°C (356° F). Prevents the formation of vapour bubbles even at extreme braking loads. Provides powerful and responsive braking.

552-403-001 Motorex Coolant M3.0

(10) Red colour

552-403-004 Motorex Coolant M3.0 Ready To Use 4 ltr (4) Red colour

552-403-020 Motorex Coolant M3.0 Ready To Use 20 ltr Red colour

552-403-200 Motorex Coolant M3.0 Ready To Use 200 ltr Red colour

COOLANT M5.0

Coolant based on ethylene glycol. It meets the strictest requirements of various manufacturers. Free of nitrates, amines and phosphates. Colour turquoise. Available as concentrate or as ready to use. (HYBRID-Technology) Productnr Product

green/blue colour

552-409-004 Motorex Coolant

552-409-020

green/blue colour

green/blue colour

CHAIN CARE

CHAIN CLEAN DEGREASER

Extremely effective chain degreaser, for all types of motorcycles. Tested for O-rings, X-rings and Z-rings. Effective removal ofencrusted oil and grease deposits, etc.Regular use considerably extends theworking life of the chain kit! Finally spraywith MOTOREX CHAINLUBE.

CHAIN LUBE ADVENTURE

White chain lubricant specifically adapted to the requirements of modern travel enduro bikes. Excellent running performance with low dirt and dust attraction. O-ring and X-ring tested. Extremely resistant to high pressure with ultraadhesive lubricating film.

CHAIN LUBE OFF ROAD

Fully synthetic chain lubricant. Especially formulated for off-road motorcycles. Tested for O-rings, X-rings and Z-rings. Excellent lubricating properties, deep penetration, resistant to water. Extends the working life of the chain kit.

CHAIN LUBE RACING

White high-performance chain lubricant containing PTFE. Ideal for sports and racing motorcycles. Tested for O-rings, X-rings and Z-rings. Reduces wear, extremely good adhesion. Extends the working life of the chain kit.

CHAIN LUBE ROAD STRONG

White chain lubricant. Especially formulated for road-going motorcycles. Tested for O-rings, X-rings and Z-rings. Extremely good adhesion, resistant to water. Extends the working life of the chain kit.

FORK OIL

RACING FORK OIL

RACING FORK OIL with the new «3D RESPONSE TECHNOLOGY». The technology enables a new innovative damping behavior by the special molecular structure. This means that tractive and impact forces are no longer diverted along a zig-zag path like an accordion, but through a multi-level grid structure instead. The three-dimensional structure of the new molecular composition forms the basis of the 3D RESPONSE TECHNOLOGY.

Productnr Product

RACING SHOCK OIL

RACING SHOCK OIL is all about maintaining the absolutely outstanding performance of RACING FORK OIL while withstanding the higher thermal loads encountered in the shock absorber without suffering any losses.

552-303-001 Motorex Racing Fork Oil 2,5W 1 ltr (6)

552-303-020 Motorex Racing Fork Oil 2,5W 20 ltr

552-306-001 Motorex Racing Fork Oil 4W 1 ltr (6)

552-306-020 Motorex Racing Fork Oil 4W 20 ltr

552-306-060 Motorex Racing Fork Oil 4W 60 ltr

552-309-001 Motorex Racing Fork Oil 5W 1 ltr (6)

552-309-020 Motorex Racing Fork Oil 5W 20 ltr

552-309-060 Motorex Racing Fork Oil 5W 60 ltr

552-312-001 Motorex Racing Fork Oil 7,5W 1 ltr (6)

552-312-020 Motorex Racing Fork Oil 7,5W 20 ltr

552-315-001 Motorex Racing Fork Oil 10W 1 ltr (6)

552-315-020 Motorex Racing Fork Oil 10W 20 ltr

552-318-001 Motorex Racing Fork Oil 15W 1 ltr (6)

552-318-020 Motorex Racing Fork Oil 15W 20 ltr

FORK OIL

Multigrade fork oil, for optimum damping at all temperatures. Prevents the formation of foam and inhibits corrosion. With care additive for seals.

Productnr Product

552-300-001 Motorex Fork Oil 10W/30 1 ltr (12)

Productnr

552-324-001 Motorex Racing Shock Oil 1 ltr (6)

552-324-020 Motorex Racing Shock Oil 20 ltr

552-324-060 Motorex Racing Shock Oil 60 ltr

RACING SD1

Shock absorber oil for racing with a high viscosity index. Provides optimum damping even under extreme conditions. Prevents the formation of foam and inhibits corrosion.

Productnr

552-321-005 Motorex Racing Sd-1 5 ltr (4)

AIR FILTER OIL

RACING BIO AIR FILTER CLEANER

MOTOREX RACING BIO DIRT REMOVER is a cleaner in powder form specially developed for off-road motorbikes and quads (ATVs) that feature a reusable foam air filter. Thanks to its active substances, it also quickly dissolves the most stubborn dirt.

552-232-0009

AIR FILTER OIL

• Specially developed air filter oil for foam air filter elements with good adhesion.

• Keeps out sand, dust and water. Guaranteed optimal air flow.

• Very good adhesion.

552-359-001 Motorex Air Filter Oil 206 1 ltr (12)

552-362-0007 Motorex Air Filter Oil 750 ml (12)

RACING BIO LIQUID POWER

Developed in close co-operation with Twin Air. MOTOREX RACING BIO LIQUID POWER is an air filter oil that has been specially developed for off-road motorcycles and quads (ATV) equipped with reusable foam air filters. This special, biodegradable oil can absorb very large amounts of dust and dirt.

AIR FILTER CLEANER

• Cleaner for foam air filter elements.

• Free of solvents, biodegradable and noncombustible.

• Ready to use.

AIR FILTER KIT

Complete maintenance set for air filters. Indispensable for off-road pilots. Simple, practical and effective.

552-235-001

CLEAN & CARE

MOTO CLEAN (360°)

New formulation with more power and reduced pH-value.Quick, clean and completely biodegradable. Penetrates well and works against corrosion. Perfect compatibility with rubber, plastic or painted parts

Productnr Product

552-433-001 Motorex Moto Clean 1 ltr (6)

552-433-005 Motorex Moto Clean 5 ltr (4)

QUICK CLEANER (360°)

• Quick cleaner with water-beading effect

Cleans plastics, visors, windscreens, paint and metal without adding water.Removes stubborn stain by insects as well as dirt, dust, etc. Fast and simple cleaning and perfect for traveling.

Productnr Product

552-460-0001 Motorex Quick Cleaner "Refill Me" 60 ml (12)

552-460-0005 Motorex Quick Cleaner 500 ml (12)

MOTO PROTECT (360°)

To preserve if not used for a long time. For painted surfaces as well as for chromium and all metal parts. Excellent corrosion protection thanks to a slight oil film. Protects against dust and dirt. Ideal for a everlasting winter protection.

Productnr Product

552-457-0005 Motorex Moto Protect 500 ml (12)

CHROME POLISH

High gloss polish for aluminium, chrome and stainless steel. This product cleans, polishes and protects the surface area. Clean the‚ burnt on road tar‘ from your exhaust.

Productnr Product

552-397-0002 Motorex Chrome Polish 200 ml (6)

POWER CLEAN

• Degreases and cleans even the most stubborn dirt.

• Removes oil, grease, tar, etc.

• Does not harm rubber, plastic and paint.

Productnr Product

552-451-0005 Motorex Power Clean 500 ml (12)

MOTO SHINE

Special gloss spray for a perfect finish after cleaning. For lasting shine on paint, plastic, chrome etc. and creates a protective antistatic film with drop-repellent effect. Outstanding also trade fair and showroom vehicles.

Productnr Product

552-439-0005 Motorex Moto Shine 500 ml (12)

CLEAN & CARE CONTINUES...

GLASS CLEANER FOAM

This glass cleaner with active foam is a highly effective cleaner for any flat surface such as windows or mirrors in your vehicle or at home and in the office. The special formula removes all kinds of dirt easily and streak-free, leaving behind a pleasant citrus scent. The stable active foam means no unwanted liquid will run off when cleaning vertical surfaces. With long-term protection for a longer-lasting cleanliness. Do not spray on hot surfaces or use in direct sunlight. Not suitable for polycarbonate glass.

Productnr Product

552-425-0005 Motorex Glass Cleaner Foam 500ml (12)

VISO-CLEAN

• Visor and helmet cleaning cloths. VISO-CLEAN quickly and effectively loosens and removes dirt, bugs, oil and soot. Better safety thanks to a smudge-free, clear view and protection with anti-fogging treatment.

PROTEX

Textile and leather impregnation. Highly effective, long-lasting protection against wet conditions and oil. Suitable for leather, textiles and microfibres (e.g. GORE-TEX®); preserves the natural breathability of the fabric. Ideal for shoes, motorbike, ski and cycle clothing, convertible roofs and other sport and leisure items.

Productnr Product

552-454-0005 Motorex Protex 500 ml (12)

HELMET CARE

Active foam for cleaning and care the inner padding. Fast and effective, antibacterial. Has deodorising and freshening effect.

Productnr

552-424-0002 Motorex Helmet Care 200 ml (12)

BRAKE CLEAN

BRAKE CLEAN is a volatile cleaner. Manufactured on the basis of hydrocarbons. Does not contain any aromatic or chlorinated hydrocarbons and is very compatible with all metals as well as lots of paints and plastics. Is free from harmful substances such as PCB, lead, cadmium and other hazardous substances. Cleans and degreases all brake and coupling parts without leaving behind any residue. Reliably dissolves and removes oil, grease, tar, brake fluid, dirt, etc. Does not attack rubber, plastic or paint.

Productnr Product

552-515-005 Motorex Brake Clean 5 ltr (4)

POWER BRAKE CLEAN

Brake cleaner degreases and cleans all brake and coupling parts under high pressure without leaving any residue. Reliably dissolves and removes oil, grease, tar, brake fluid, dirt, etc.

• Does not attack rubber, plastic or paint.

Productnr Product

552-448-0005 Motorex Power Brake Clean 750 ml (12)

Productnr

552-478 Motorex Viso-Clean 12x 6 packs (6)

WORKSHOP

CARBURETOR CLEAN FLUID

Carburetor cleaner to ensure trouble-free cleaning of residue and impurities from carburetors. Cleans air passages, inlet flaps, Venturi tubes, adjustment screw seats and carburetor housings. Ideally suited for use in overhauls of older vehicles or those that have been laid up for a relatively long time.

SYSTEM GUARD

Fuel additive that cleans and breaks up deposits throughout the fuel injection system. It improves corrosion protection and binds water. For all petrol and diesel fuels.

552-377-0005 Motorex Carburetor 500 ml (12)

552-381-001 Motorex Carburetor Clean Fluid 1 ltr (12)

MOTOR START

Dependable, highly effective, starting aid for petrol and diesel engines. Friction-reducing lubricating additive reduces engine wear at start-up.

552-442-0005 Motorex Motor Start 500 ml (12)

HYDRAULIC FLUID 75

ETHANOL TREATMENT

Fuel additive that improves the properties of all fuels mixed with ethanol. Its properties reduce phase separation/separation, optimise fuel efficiency and reduce corrosion. Ensures that the engine runs more easily, removes deposits in the combustion chamber, regenerates old fuel and helps to remove water from the system.

FUEL STABILIZER

Productnr Product

552-348-0002 Motorex Hydraulic Fluid 75 250 ml (12)

552-348-001 Motorex Hydraulic Fluid 75 1 ltr (12)

Fuel system additive stabilizes fuel during long periods of storage. FUEL STABILIZER prevents the gummy build up in the fuel system associated with oxidation and ensures a smooth start after long periods of storage. For all 2-stroke and 4-stroke engines with or without catalytic converters. Mixing ratios: 1l:250l.

• Special oil for hydraulic clutch systems Excellent age resistance. Ideal viscosity at both high and low temperatures. High seal compatibility. Area of application: When-ever the manufacturer recommends a mineral oil based fluid. Productnr

552-481-0012 Motorex Fuel Stabilizer In Desk Display 125 ml (12)

WORKSHOP CONTINUES...

TYRE MOUNTING FLUID

Special, fast-drying and economical tyre mounting fluid for effortless mounting and removal of all conventional tyres. Tested for tyre pressure monitoring systems. (TPMS). Does not leave any visible residues after mounting.

ACCU PROTECT

Protects battery terminal posts, pole terminals, connectors and starter connection cables. Prevents corrosion and oxidation.

Productnr Product

552-493-0001 Motorex Tyre Mounting Fluid 100 ml (12)

552-493-001 Motorex Tyre Mounting Fluid 1 ltr (12)

BIKE GREASE 2000

Calcium-based yellow fluorescent grease with remarkable and long-lasting lubricating performance. MOTOREX BIKE GREASE 2000 is a highly waterrepellent and extremely pressureresistant grease. It offers increased oxidation resistance and very good ageing resistance. Ideal for lubricating bearings, wheel bearings, joints and headset. Neutral to elastomers and seals and prevents galvanic corrosion.

Productnr Product

552-503-0004 Motorex Bike Grease 2000 400 gr (10)

552-503-0008 Motorex Bike Grease 2000 850 gr (12)

WHITE GREASE

This special white lubricating grease for all two-wheeled vehicles resists ageing and has good adhesion properties. Lithium grease, NLGI 2.

Productnr

552-506-0001 Motorex White Grease 628 100 gr (12)

Productnr Product

552-350-0002 Motorex Accu Protect 200 ml (12)

GREASE 176 GP

GREASE 176 GP is based on mineral oil and lithium soap. With effective EP (extreme pressure) additives. Ageing-resistant, stable against water, weak acids and alkali solutions. GREASE 176 GP is a multi-purpose grease for use in a wide variety of applications to ensure excellent performance in all slide bearings and roller bearings. For use in workshops, agriculture, industry, transport and construction.

Productnr

552-500-0002 Motorex Grease 176 Gp 250 gr (12)

552-500-0008 Motorex Grease 176 Gp 850 gr (12)

GREASE

Viscous grease spray with good adhesion, as an alternative to brushing application. Resistant to water and saline solution.

• Good protection against corrosion and wear.

Productnr

552-418-0005 Motorex Grease 500 ml (12)

WORKSHOP CONTINUES...

EASY CUT SPRAY

Drilling and cutting oil spray for all high-alloyed steel grades as well as non-ferrous metals and aluminium. Increases the machining speed, reduces wear and extends the service life of tools. Optimum cooling and lubricating properties.

MOTOREX EASY CUT PUMPSPRAY is perfect for processing (drilling, thread cutting, sawing, turning, milling, punching) all high-alloyed steel grades as well as non-ferrous metals and aluminium.

552-419-0002 Motorex Easy Cut Spray 250ml (12)

PROWELD

Welding protection spray; silicone and solvent-free and incombustible. Effectively prevents the adhesion of welding beads, protects weld deposits and equipment from corrosion, does not leave behind any ash residues and can easily be rinsed with water.

MOTOREX PROWELD SPRAY is ideal for use in any type of welding operation. Product is sensitive to low temperatures do not store or use at temperatures below 5°C.

COPPER SPRAY

Is a special copper spray to prevent mechanical parts exposed to high temperatures such as exhaust manifold bolts, spark plugs, brake pads and heat exchangers from seizing as a result of heart. Silencing properties, resists oxidation, protection against corrosion, good adhesion, resistant to salt water, extremely good thermal stability. Suitable for use between -40 ºC (-40 ºF) and +1200 ºC (+2192 ºF).

552-412-0003 Motorex Copper 300 ml (12)

JOKER 440

Indispensable for industry, trade, workshops, service stations, households, gardens, sport and leisure activities. Lubricates all moving parts, stops squeaking, undermines water, protects against corrosion, has a dielectric effect, cleans and cares for metals and plastics. Fully synthetic.

552-430-0005 Motorex Joker 440 500 ml (12)

PTFE SPRAY

Spray with PTFE is a dry lubricant, suitable as an anti-seize and release agent, which does not leave behind any oily marks. The extremely thin PTFE layer with a particle size of 5 μm prevents parts sticking to moulds and stops mounted parts becoming seized on machine tools. Almost unlimited chemical resistance and suitable for use over a very wide range of temperatures (+265 °C/+509 °F). Antistatic.

Spray Ptfe 200 ml (12)

SILICONE SPRAY

Lubricates, cares for and protects rubber, plastic and all metal parts. Plastic components are given a high gloss; rubber items receive care and protection. Thermal stability from -50 °C (-58 °F) to +200 °C (+392 °F). Antistatic, water-repellent, guards against oxidation.

552-463-0005 Motorex Silicone 500 ml (12)

Productnr Product 552-440-0005 Motorex Proweld 500ml (12)

4-STROKE MOTOR OIL

FULL POWER KATANA

The 100% synthetic engine oil for sporty driving. Because with FULL POWER KATANA, no more cracking boxes and no more trouble finding neutral.

• Smooth and pleasant gearbox

• Smooth and faster gear changes

• Maximum engine performance at very high speeds

• Engine protection even at full power

JASO MA2, API SN

R4000 RS

The high-performance semi-synthetic (with ESTER) engine oil for road motorcycles. Because R4000 RS ensures better clutch operation when starting, accelerating and at maximum speed.

• Optimum engine and gearbox protection

• Wear resistance

• Anti-corrosion and anti-oxidation

• Can with pouring spout for precise dosing

JASO MA2/ API SM

KATANA OFF-ROAD

The 100% synthetic engine oil for sporty off-road driving. Whether you’re a crossman or an enduro rider, it was made for you!

• Quicker revs

• Resistance to intensive clutch loads

• Fast and precise gear shifts

• Tested and approved at the Touquet Enduropale

JASO MA2, API SN

10.3 / 10.4 / 15.5

The semi-synthetic motor oil for road motorcycles.

• Wear resistance

• Optimum lubrication

JASO MA 2, API SL

Productnr Product

55-205-001

55-120-001

55-120-004

55-120-220

55-122-001

Ipone 10.3 10W30 semi-synt. 1L

Ipone 10.4 10W40 semi-synt. 1L

Ipone 10.4 10W40 semi-synt. 4L US

Ipone 10.4 10W40 semi-synt. 220L US

Ipone 15.5 15W50 semi-synt 1L

4-STROKE MOTOR OIL CONTINUES...

SCOOT

The semi-synthetic engine oil for 4-stroke scooters

• Fuel economy

• Engine protection

JASO MB, API SL

Productnr

55-192-001

Scoot 4 10W-40 1L

KATANA SCOOT

The engine oil for 4-stroke scooters and maxi-scooters

• Best engine performances

• Fuel economy

• 100% Synthetic

• Engine protection

JASO MB, API SM

55-191-001 Ipone Katana Scoot 4 5W-40 1L

SNOWMOBILE OIL

Snow Racing 2-Stroke

Semi-synthetic snowmobile oil suitable for air- and liquid-cooled engines. Especially developed for engines with exhaust controls. Suitable for route and racing.

ATV 4000 RS

5W-40 is fully synthetic and 10W-40 semi-synthetic. Because ATV 4000 RS is specially developed for 4-stroke quads in agricultural and utility uses.

• Engine protection

• Anti-corrosion and anti-oxidation

JASO MA2, API SL

• Excellent lubricating properties even in extreme conditions.

• Melting point 54 ° C.

• Exhaust strawberry scented and smokeless.

JASO FD/API TC

55-100-001

55-100-004

55-100-005

55-100-220

Ipone Snow Racing 2 1L

Ipone Snow Racing 2 4L

Ipone Snow Racing 2 4+1L

Ipone Snow Racing 2 220L

Snow Racing 4-Stroke

A fully synthetic oil specially formulated for 4-stroke sports sleds. Suitable for route and racing. Excellent lubrication properties when starting in the harshest temperatures (-54 ° C). Reduces engine friction very effectively in all conditions!

API SN

Productnr

55-104-004

Ipone Snow Racing 4 0W40 4L

2-STROKE MOTOR OIL

STROKE 2R RACING

A fully synthetic 2-stroke oil developed for the toughest requirements in competitive conditions. Suitable for motocross, enduro and trial use. The bottle comes with a measuring cup that makes it easy to measure the oil! Pre-mix only.

Stroke 2 R (racing) 1L

SAMOURAI RACING

Fully synthetic 2-stroke oil for racing use.

• Best performances

• Compatible mixing, separate lubrication and latest injection systems

• 100% Synthetic with ESTER

• Practical dosing canister

API TC

R2000 RS

• Synthetic plus

• Anti-smoke formula

• Oil fuel mixing bottle

API TC / JASO FD

SCOOT CITY STRAWBERRY

• Synthetic Plus

• Anti-smoke formula for urban use

• Available with strawberry scent

JASO FD, API TC

SELF OIL

Because SELF OIL is a gardener’s friend! It is suitable for lawn mowers, chainsaws, hedge trimmers, brush cutters and other 2-stroke motor-powered cultivators.

• Semi-Synthetic

• Optimum lubrication

• Engine protection

• Practical dosing canister

JASO FC, API TC

Scoot City

The semi-synthetic engine oil for 2-stroke scooters in regular use

• Compatible mixing and injection

• Noise and smoke emissions reduction

JASO FD, API TC

BRAKE FLUID FORK OIL

X-TREM BRAKE FLUID

A fully synthetic brake fluid developed for competitive use. Extremely high boiling point (328 ° C). 100% synthetic.

Productnr

55-171 Ipone X-Trem Brake Fluid Racing 500ml

BRAKE DOT 5.1

• Dry boiling point : 270°C / 518°F

• Particularly well-suited to vehicles with ABS brake systems

• 100% Synthetic

Productnr

55-172-1

Brake DOT 5.1 500ml

FORK RACING

100% Synthetic Formulated for competition Exclusive anti-friction additive Available in Grade 3 and 7

55-148-001 Ipone Fluid Fork Racing SAE3

FORK SYNTHESIS

Road and off-road use

• FORK 5 was developed for soft forks

• FORK 10 was developed for medium forks

• FORK 15 was developed for medium/hard forks

• FORK 20 was developed for hard forks

• No more noises and clicking

• Handling is significantly improved

• Maintains its performance at all temperatures

• Protection against wear and corrosion

Productnr

55-150-001 Ipone Fork Synthesis gr 5 1L

55-152-001 Ipone Fork Synthesis gr 10 1L

55-154-001 Ipone Fork Synthesis gr 15 1L

55-156-001 Ipone Fork Synthesis gr 20 1L

MONO SHOCK FLUID

Synthetic with Ester Formulated for competition Anti-friction. Anti-emulsion Perfect suspension stability

55-170-001

Monoshock Fluid 1L

TRANSMISSION OIL

BOX 2 SYNTHESIS

Synthetic Plus with Ester Formulated for separated gearboxes with a wet clutch High protection

DEXTRON 2R

Mineral

Compliant with the Dexron IID standard Lubrication and optimum protection for your transmission

BOX X-TREM

Specially designed for 2-stroke motorcycles in competition, track and off-road use.

• Developed in partnership with the Red Bull MotoGP Rookies Cup

• Reduces the risk of slipping

• Recommended for wet or dry clutches

TRANS 4

80W90 - Mineral 80W140 - Synthetic plus The cardan shaft and axle oil. Ensures a perfect lubrication and an optimum protection of mechanical parts such as cardan shafts and rear wheel bearings.

• Reduces jolts during gear shifts

• Reduces mechanical noise

• Resistance to high loads

• Extreme pressure additives

API GL5

TRANSCOOT

Mineral

Extreme pressure additivies API GL5

• Optimum lubrication

• Extends the life of the gears

• Compatible with seals

CHAIN OIL

X-TREM CHAIN ROAD

• Long-lasting performance (800km) in extreme conditions

• Zero projection

• Visible at application

• Multi-position diffuser with retractable rod

• O-X-Z ring compatible

ROAD CHAIN PACK

Because in this pack you have everything you need for a complete maintenance of your chain!

• 1 road chain grease 750ml

• 1 chain cleaner 750ml

• 1 chain brush

X-TREM CHAIN OFF-ROAD

Chain grease specially developed to withstand extreme conditions in cross and enduro.

• Resistant to water, sand, mud, soil

• Non-stick formulation

• Zero projection

• O-X-Z ring compatible

OFF ROAD CHAIN PACK

Because in this pack you have everything you need for a complete maintenance of your chain!

• 1 off road chain grease 750ml

• 1 chain cleaner 750ml

• 1 chain brush

COLOURED CHAIN GREASE

• Red / Blue / White coloured chain grease

• Water resistant

• Anti-corrosion

CHAIN CLEANER

Because CHAIN CLEANER is THE ultimate chain degreaser that cleans and makes your chain shine like it's brand-new.

• Powerful and precise spray

• Powerful chain degreaser, effective against the most stubborn greases

• Multi-position diffuser with retractable rod

• Compatible with O-rings

CLEAN, CARE & WORKSHOP

RADIATOR LIQUID

Ready to use coolant.

• Allows you to save up to 5° C on your engine temperature

• Anti-freeze protection

• Removes deposits

• Blue colour

AIR FILTER OIL SPRAY

For foam air filters Keeps the dirt in the filter so that it doesn't go into your engine.

• Holds water, mud, dust and sand

• Boost your engine power

• Wide and homogeneous spraying

• Blue colour

CARBU CLEANER

• Powerful carburettor degreaser

• Improves power recovery

• Reduces exhaust smoke emissions

• Reduce your fuel consumption

• Powerful and precise spraying

FUEL STABILIZER

Facilitates starts after long periods of inactivity of the engine as over wintering.

• Conserves fuel for 2 years

• Preserves the properties of gasoline

• Practical dosing bottle

• Reduces maintenance cos

AIR FILTER CLEANER

Degreaser for foam air filters. Removes impurities from your filter to give your engine maximum power.

• Cleans and degreases effectively

• Does not damage filters

• Easy application

INJECTOR CLEANER

Makes starting easier and restores the original performance of your bike.

• Eliminates deposits in the injection system

• Better engine torque at acceleration

• Reduces exhaust smoke emissions

• Limits oil and fuel consumption

CLEAN, CARE & WORKSHOP CONTINUES...

BRAKE CLEANER

• Powerful degreaser

• Removes dust from the brake and clutch system

• Prevents brake squeal

• Extends the service life of brake discs and pads

• Dries quickly without leaving any residue

FULL PROTECT

Multi-purpose universal lubricant. Removes moisture from electrical components, removes rusted parts and lubricates handles, cables and chains. Great after washing. Good pressure!

WATERPROOF GREASE

Water resistant (evel salted!) mechanical grease

• Prevents breakage and oxidation of parts

• Perfect for bearings, joints, axes and other pivots

• Good adhesion to moving parts

• Durability and efficiency over time

S.O.S TYRE

Puncture-proof spray. S.O.S TYRE repairs and reinflates your tyre in 10 seconds.

• Compatible with all types of tyres

• Convenient portable format

CLEANER POLISH

• Multi-surface cleaning wax

• Effortlessly cleans and polishes

• Leaves no traces or greasy finish

• To be used without water with a microfibre wipe

• Removes micro-scratches

PLASTIC SHINE

• Silicone based plastic renovator

• Renovates dull plastics

• Without damaging plastics

• Without traces or greasy layer

Ipone Full Protect 750ml

CLEAN, CARE & WORKSHOP CONTINUES...

TEXTILE CLEANER

Foam cleaner for motorcycle textile.

• Does not damage fabrics and fibres

• Leaves a pleasant smell

• Integrated brush

• Suitable for all types of textiles

LEATHER CREAM

Nourishing cream for leather care.

• Suitable for all types of leather (jackets, boots, gloves, saddle and luggage)

• Effective against encrusted insects

• The cream has a good hold and does not drip

• Practical format, opens with a simple thumb push

HELMET KIT

Allows you to completely clean your helmet. Practical transportable format, can be put under the saddle

• 1 helmet exterior cleaner

• 1 helmet interior cleaner

• 1 rain repellent

• 1 microfibre wipe

VISOR RAINOFF

Effective rain repellent for visor and bubble

• Disperses water instantly and improves your visibility for greater safety.

• Tested in extreme rain conditions

• Does not leave traces

4-STROKE MOTOR OIL

POWER1 RACING

Castrol POWER1 Racing 4T is fully synthetic engine oil for modern, high performance 4-stroke sports bike that increases engine acceleration and power right up to maximum rpm. Castrol POWER1 Racing 4T using ‘Race Derived Technology’ based on Castrol’s long and successful racing association, flows fast and stays strong, reducing internal engine friction even under the most arduous riding conditions. API SN

JASO MA-2

55-401-001 Castrol Power 1 Racing 4T 5W-40 1 L 55-401-004 Castrol Power 1 Racing 4T 5W-40 4 L

55-401-208 Castrol Power 1 Racing 4T 5W-40 208 L

55-400-001 Castrol Power 1 Racing 4T 10W-50 1 L

55-400-004 Castrol Power 1 Racing 4T 10W-50 4 L

Castrol Power 1 Racing 4T 10W-50 208 L

POWER1

Castrol POWER1 Racing 4T is fully synthetic engine oil. Castrol Power 1 4T is an advanced, premium quality engine oil developed for the latest generation 4-stroke motorcycle engines. Castrol Power 1 4T with Power Release Formula is designed specifically for bikers who love the exhilaration of riding.

• Advanced 4-stroke motorcycle engine oil formulation.

• Allows the engine to develop the same power as when new, even after an extended duration of speed, high load, high temperature running

• Flows fast and reduces internal engine losses to friction.

• Trizone TechnologyTM for protection of engine, clutch and gears.

10W-30 (API SL)

15W-50 / 10W-40 API SN

JASO MA-2

Castrol Power 1 4T 15W-50 (GPS) 1 L 55-408-004 Castrol Power 1 4T 15W-50 (GPS) 4 L

55-408-208 Castrol Power 1 4T 15W-50 (GPS) 208 L

POWER1 MINERAL

Castrol Power 1 4T 20W-40 is an advanced, premium quality Mineral engine oil designed for the latest generation 4-stroke motorcycle engines. It’s ‘Power Release Formula’ helps to flow fast and reduces internal engine losses to friction, giving maximum and sustained power right up to very high operating rpm. It has been tested and proven to deliver superior acceleration at the touch of the throttle. The added Castrol advantage of Trizone TechnologyTM ensures uncompromised performance protection

• Complies with requirements of catalyst equipped engines

MAGNATEC C3

Application Castrol Magnatec 5W-40 C3 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA C3, API SN/CF or earlier specification 5W-40 lubricant. Castrol Magnatec 5W-40 C3 is approved for use in vehicles from a wide range of manufacturers, please refer to the specifications section and your vehicle handbook. Castrol Magnatec 5W-40 C3 has been specially formulated to deliver outstanding protection for the latest engines fitted with after treatment devices such as diesel particulate filters and 3 way catalysts *GM dexos2®: supersedes GM-LL-B-025 and GMLL-A-025 : GB2D0115082

API SN

JASO MA-2

ACEA A3/B4

EDGE Ti A3/B4

4-STROKE MOTOR OIL CONTINUES...

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most. Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine

EDGE A3/B4

Castrol EDGE 0W-40 A3/B4 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA A3/B4, API SP or earlier specifcation 0W-40 lubricant.

• Transforms to be strongest when the pressure is highest, protecting your engine

• Reduces power-robbing friction across engine speeds and conditions

• Independently tested at the highest standards for proven performance

• Recommended by world-leading car manufacturers

• Protects the engine for the entire drain interval even under extreme pressure

• Delivers high levels of fuel efficiency and low temperature performance

ACEA A3/B4

2-STROKE MOTOR OIL

POWER 1 RACING (TTS)

Castrol Power1 Racing 2T is an advanced, fully synthetic 2-stroke engine oil for use in high speed, high performance 2stroke motorcycle engines to deliver ultimate performance. Castrol Power1 Racing 2T with Race Derived Technology is designed to release the full potential from highly tuned motorcycle engines as it burns fast and protects well. It enhances throttle response for faster acceleration.

API TC

ISO-L-EGD JASO FD

POWER 1

Castrol Power 1 2T is superior part synthetic 2-Stroke engine oil. Its unique Clean Burning Formula makes it especially suitable for use in 2 Stroke vehicles delivering long lasting performance and superior engine cleanliness.

API TC

ISO-L-EGD JASO FD

55-422-001 Castrol Power 1 2T 1 L

Power 1 A747

Castrol POWER1 A747 is a low ash, part synthetic racing lubricant specially formulated for use in multi-cylinder, watercooled two-stroke engines fitted to road racing machines, where combustion chamber deposit control is essential. It also contains special additives to prevent throttle slide sticking in wet weather conditions.

API TC

Productnr

55-426-001 Castrol A 747 1 L

POWER1 SCOOTER

API TC+

ISO-L-EGD JASO FD

Castrol POWER1 Scooter is fully synthetic engine oil. For 2-Stroke engines Castrol POWER1 2T is a low smoke oil for modern 2T scooters. Its unique formulation protects the exhaust system from the build up of excessive carbon deposits which can lead to a drop in engine performance over time.

TRANSMISSION OIL

TRANSMAX AXLE LL

Fully synthetic final drive lubricant which is suitable for use in axles and final drives in commercial vehicles and passenger cars where API GL-5 performance is required. Transmax Axle Long Life 75W-140 is included in the Scania High Performance product list and is approved against Scania STO 2:0A

API GL-5 Scania STO 2:0A

TRANSMAX AXLE EPX

Product Perfromance Claims: FMVSS 116 DOT4, ISO 4925 Class 4, JIS K2233, SAE J 1703, SAE J1704

MTX 10W-40

Transmission oil for motorcycles.

API SG. JASO MA

Productnr

55-445-001 Castrol MTX 10W-40 1 L

ATF DX III Multivehicle

Automatic Transmission Fluid that is recommended for use in GM automatic transmissions pre-2005 (Dexron® II or III) and Ford automatic transmissions built between 1983 and 1996 (Mercon®). This product is approved for use in Allison heavy duty transmissions against TES 389 and approved for use in a wide range of European heavy duty automatic transmissions. This product replaces Castrol ATF Dex II Multivehicle

TRANSMAX UNIVERSAL LL

Castrol Transmax Universal LL 75W-90 formulated with Smooth Drive Technology™ is a full synthetic multi purpose manual transmission and final drive lubricant. It may be used in synchronised manual transmissions and final drives / differentials of a wide range of vehicles (commercial vehicle, construction equipment) where API GL-4 or API GL-5 fluids are required and it carries a number of OEM approvals.

Syntrax Universal LL

Fully synthetic, highly versatile oil that can be used in automotive manual transmissions, transfer cases, traction gears and other applications where API GL-4 or GL-5 oil is recommended. The product is suitable for use in all applications where the viscosity requirement is SAE 75W, 80W, 90, 75W-90, 80W-90 or 85W-90 and can replace e.g. the following Castrol products: Castrol EP 80W; Castrol EP 90: Castrol EPX 80W-90. API GL-4, API GL-5, API MT-1

BRAKEFLUID CHAIN OIL

BRAKE FLUID DOT 4

Castrol Brake Fluid DOT 4 is a synthetic brake fluid comprising of glycols and borate esters to achieve a higher boiling point and wet boiling point.

JIS K2233, SAE J1703, SAE J1704, ISO 4925 Class 4, FWVSS DOT 4

REACT PERFORMANCE DOT 4

Castrol React Performance DOT 4 is a high boiling synthetic brake fluid which far exceeds the requirements of the SAE J1704, FMVSS 116 DOT 3 and DOT 4, ISO 4925 and JIS K2233 specifications. This product has been formulated from mixed polyalkylene glycol ethers and borate ester together with other high performance additives and inhibitors which give ultimate system protection against the effects of corrosion and high temperature vapour lock. Castrol React Performance DOT 4 brake fluid is designed for use in all brake systems particularly those which are exposed to extreme conditions such as high performance vehicles and race conditions.

SAE J1703 & J1704

FMVSS 116 DOT 4

JIS K2233

ISO 4925 Class 4

CHAIN SPRAY OR

COOLANT

CHAIN SPRAY OR

ASTM D3306; BS 6580:2010;

FORK OIL

FORK OIL

Castrol Fork Oil Synthetic 5W is a fully synthetic suspension fluid designed to provide the ultimate damping performance in all on and off road suspensions.

Application To maximise the performance of Castrol Chain Spray O-R, clean the chain with Castrol Chain Cleaner before gently applying the chain spray. Once the lubricant has been applied, wait, depending on the outside temperature for 10-20 minutes, to let solvent evaporate before using the motorcycle.

Castrol Radicool is a concentrated engine coolant for use in both petrol and diesel engines with aluminium or cast iron engines. This coolant can be mixed using 33% concentration with purified water to give frost protection to -18 deg C, however it is recommended to use a 50% dilution to provide optimum corrosion protection and freeze protection down to -36 deg C. At these concentrations this coolant will provides year round protection. To maintain optimum performance this product should be replaced after 1 year

4-STROKE MOTOR OIL

EXS ENGINE OIL

Bel-Ray EXS Full Synthetic Ester 4T Engine Oil is a premium motorcycle oil that uses the finest quality synthetic hydrocarbon and ester base fluids combined with unique Extreme Pressure, anti-wear additives and shear resistant VI improvers to meet the demands of high-performance applications. Lowers engine temperatures and increases horsepower. Meets the performance requirements of API SN and JASO MA2. Suitable for air-cooled/ liquid-cooled 4-stroke engines and wet clutches.

• Synthetic Ester and PAO base fluid formula

• Delivers ultimate performance, protection and power

• Increased value from extended drain intervals

• Premium transmission and wet clutch performance

EXP ENGINE OIL

Bel-Ray EXP Synthetic Ester Blend 4T Engine Oil is a 4-stroke motorcycle oil that combines the finest quality synthetic oils with select mineral base oils ensuring the highest level of protection for all 4-stroke motorcycles. Contains shear resistant VI improvers to resist viscosity breakdown. Meets the performance requirements of API SN and JASO MA2. Suitable for air-cooled/ liquid-cooled 4-stroke engines and wet clutches.

• Synthetic Ester blended with select synthetic and petroleum components

• Provides exceptional component protection and increased horsepower

• Premium anti-wear properties

•

EXL ENGINE OIL

Bel-Ray EXL Mineral 4T Engine Oil is a premium 4-stroke motorcycle oil. Meets the performance requirements of API SN and JASO MA2. Suitable for air-cooled/liquid-cooled 4-stroke engines and wet clutches.

• Delivers outstanding protection

• Exceeds all OEM requirements

• Long change intervals

• Excellent transmission and wet clutch performance

JASO MA2 , API SN

JASO MA2 , API SN

JASO MA2 , API SN

4-STROKE MOTOR OIL CONTINUES...

ATV TRAIL MINERAL 4T ENGINE OIL

Bel-Ray ATV Trail Mineral 4T Engine Oil with Rust Defense System is a premium multi-grade 4-stroke ATV oil for the unique demands of all 4-stroke ATVs, Quads, and UTVs. Equally suitable for aircooled/liquid-cooled 4-stroke engines. The specially developed Rust Defense System coats internal engine components providing unsurpassed rust and corrosion protection. Unbeatable anti-wear chemistry eliminates wear, extending engine life.

• Petroleum-based formula for the unique demands of 4T ATVs and UTVs

• Rust Defense System coats engine components for corrosion protection

• Wear protection extends engine life

• For air-cooled/liquid-cooled 4T engines with JASO MA2 wet clutch performance

JASO MA2, API SM

SHOP OIL

Shop Oil is an excellent value, premium multi-grade petroleum motor oil for service departments, shop fill and new and rebuilt engine run-in. Formulated for 4-stroke motorcycles and other 4-stroke performance engines. It is designed for topping off, service fills, as well as new and rebuilt engine run-in. It has all the superior lubrication performance of Bel-Ray’s additive chemistry and high Viscosity Index, low-volatility, petroleum base oils to provide premium 4-stroke engine protection.

• Provides excellent performance, engine protection and reliable allseason use

• Equally suitable for air-cooled and liquid-cooled engines

• Superior deposit control reduces sludge and varnish for cleaner, cooler running engines

• Minimizes deposit formation and reduces oil consumption

V-TWIN MINERAL ENGINE OIL

V-Twin Mineral Engine Oil 20W-50 is a value priced, multi-grade, 4-stroke motorcycle oil formulated for V-Twin engines. It is formulated with high viscosity Index and low volatility petroleum base oils.

• Delivers outstanding protection

• Exceeds all OEM specifications

• Long change intervals

• Excellent transmission and wet clutch performance for V-Twins with shared transmissions compartments

JASO MA2 , API SN

V-TWIN SEMI-SYNTHETIC ENGINE OIL

V-Twin Semi-Synthetic Engine Oil 20W-50 is a synthetic blend, multi-grade V-Twin motorcycle oil formulated to meet the specific demands of large displacement V-Twin engines. It combines the benefits of fully-synthetic oils with the lower cost of petroleum oils.

• Synthetic Ester blended with select synthetic and petroleum components

• Provides exceptional component protection and increased horsepower

• Premium anti-wear properties

• Superior transmission and wet clutch performance for V-Twins with shared transmissions compartments

JASO MA2 , API SN

JASO MA2 , API SL

4-STROKE MOTOR OIL CONTINUES...

V-TWIN SYNTHETIC ENGINE OIL

V-Twin Synthetic Engine Oil 10W-50 is a multi-grade synthetic motorcycle oil formulated to meet the specific demands of large displacement V-Twin engines. It combines the benefits of fully-synthetic base oils with high performance additives.

• Synthetic Ester and PAO base fluid formula

• Delivers ultimate performance, protection and power

• Better cooling performance for hot engines

• Premium transmission and wet clutch performance for V-Twins with shared transmissions compartments

THUMPER® RACING WORKS

SYNTHETIC ESTER 4T ENGINE OIL

Bel-Ray Thumper Racing Works Synthetic Ester 4T Engine Oil is a 4-stroke synthetic motorcycle racing oil that has been developed for full works competition use and is designed to withstand extreme racing conditions. Full synthetic ester base oils withstand the highest temperatures and stresses and provide the ultimate performance for 4-stroke motorcycles. Meets API SN and JASO MA2 requirements. Suitable for air-cooled/liquid-cooled 4-stroke engines and wet clutches.

• Synthetic ester formula for the ultimate Thumper performance

• Withstands extreme racing conditions

• For air-cooled/liquid-cooled 4T engines with wet clutches

JASO MA2 , API SN

SAE Viscosity Grade & Outdoor Temperature

SAE 20W-50

SAE 15W-50

SAE 10W-40

SAE 10W-30 SAE 5W-40

Motor Oil Viscosity Ratings

Viscosity ratings for commonly used motor oils typically range from O up to 50.

THUMPER RACING ENGINE OIL

• With multi-viscosity oils, a “W” after the number stands for “Winter” grade oil

• The numeric value of the first number (example 5W-20) is a reference point to the lowest applicable temperature

Bel-Ray Thumper Racing Synthetic Ester Blend 4T Engine Oil is a 4-stroke motorcycle racing oil that combines the finest quality synthetic esters and highly-refined mineral base oils specifically engineered for today’s 4-stroke single cylinder, multi-valve racing engines. Provides maximum anti-wear protection for valve-trains, rings, cylinders and pistons. Delivers maximum horsepower while providing consistent clutch performance. Meets API SN and JASO MA2 requirements. Suitable for air-cooled/liquid-cooled 4-stroke engines and wet clutches.

• The SAE grade is a reference point to the oil viscosity at operating temperatures

• Synthetic ester blend for racing engines

• Maximum horsepower and consistent clutch performance

• Wear protection for valve-trains, rings, cylinders and pistons

•

55-818-001

55-818-004

55-825-001

55-825-004

Bel-Ray Thumper Racing 10W-40 Synthetic Ester Blend 4T Engine Oil 1L

Bel-Ray Thumper Racing 10W-40 Synthetic Ester Blend 4T Engine Oil 4L

Bel-Ray Thumper Racing 15W-50 Synthetic Ester Blend 4T Engine Oil 1L

Bel-Ray Thumper Racing 15W-50 Synthetic Ester Blend 4T Engine Oil 4L

JASO MA2 , API SN

JASO MA2 , API SN

2-STROKE MOTOR OIL

MINERAL ENGINE OIL

Bel-Ray 2T Mineral Engine Oil is a 2-stroke motorcycle oil specially formulated for pre-mix and injector systems for small 2-stroke engines allowing a clean burn that reduces deposits, smoke and engine wear, providing added power and improved reliability.

• Clean-burning, petroleum-based formula for injector/auto-lube or pre-mix applications

• Wear protection extends engine life

• Improves ring seal for maximum compression

JASO FD , ISO L-EGD

Productnr Product

55-820-001 Bel-Ray 2T Mineral Engine Oil 1L

SL-2 ENGINE OIL

Bel-Ray SL-2 Semi-Synthetic 2T Engine Oil is a 2-stroke semi-synthetic motorcycle oil that provides outstanding performance in 2-stroke motorcycle engines. Reduces exhaust smoke and prevents the build-up of carbon deposits to ensure longer lasting, better performing engines. Meets the JASO FD and ISO-L-EGD ratings ensuring the highest level of detergency for better performing, longer running engines. Recommended for both autolube and pre-mix applications.

• Clean-burning synthetic blend for injector/ auto-lube or pre-mix applications

• Wear protection extends engine life

Productnr Product

SI-7 ENGINE OIL

Bel-Ray Si-7 Full Synthetic 2T Engine Oil is a 2-stroke motorcycle oil specifically formulated for use in injector/autolube systems, but can be used as pre-mix. Formulated to reduce smoke and carbon residue while providing the highest level of protection for all 2-stroke engines. BelRay Si-7 meets the JASO FD and ISO-L-EGD ratings ensuring the highest level of detergency for better performing, longer running engines.

• Clean-burning, synthetic ester for injector/ auto-lube or pre-mix applications

• Provides a high level of protection and performance for all 2-stroke engines

• Formulated to reduce smoke and carbon residue

H1-R RACING ENGINE OIL

Bel-Ray H1-R Racing 100% Synthetic Ester 2T Engine Oil is formulated for all power valve 2-stroke engines. Advanced 100% synthetic ester base oils cling to metal, preventing wear in all 2-stroke applications. Bel-Ray H1-R Racing 100% Synthetic Ester 2T Engine Oil is clean burning to prevent carbon build-up in combustion chambers and power valve mechanisms. Not suitable for methanol fuel. 2017 CIK-FIA Certified for use in high performance racing kart applications.

• Synthetic Ester formula

• Keeps power-valves clean and responsive for increased horsepower

• Superior film strength prevents wear

• Suitable for any and all manufacturers recommended mix ratios

• CIK-FIA approved for use in racing kart engines

55-824-001 Bel-Ray SL-2 Semi-Synthetic 2T Engine Oil 1L Productnr Product

55-821-001 Bel-Ray Si-7 Synthetic 2T Engine Oil 1L

• Pre-mix only for air-cooled/liquid-cooled 2T power-valve engines (not for methanol fuel)

JASO FD , ISO L-EGD

Productnr Product

API TC, JASO FD , ISO L-EGD

API TC, JASO FD , ISO L-EGD

TRANSMISSION OIL

GEAR SAVER TRANSMISSION OIL

Bel-Ray Gear Saver Transmission Oil is a gear oil that has been developed for the unique demands of all motorcycle transmissions equipped with wet clutches. Bel-Ray Gear Saver Transmission Oil flows freely for better clutch cooling and provides positive clutch engagement for better starts and longer clutch life while protecting highly-loaded gears from wear, ensuring smooth shifts for more positive action.

• Formulated to protect transmission gears from wear

• Positive clutch engagement for better starts and longer clutch life

• Protects shafts, bearings and gears

• For air-cooled/liquid-cooled 2T/4T transmissions with wet clutches

THUMPER GEAR SAVER TRANSMISSION OIL

Bel-Ray Thumper Gear Saver Transmission Oil is a premium transmission oil that has been developed for the unique demands of motorcycles equipped with separate engines and transmissions. Formulated with extra protection for gears and bearings subject to high torque loads of modern motorcycle transmissions. This multi-viscosity formula flows freely for better clutch cooling and provides positive clutch engagement for better starts and longer clutch life while protecting highly-loaded gears from wear, ensuring smooth shifts for more positive action.

• Formulated to protect transmission gears from wear

• Maximum clutch performance and smooth shifting

• Wear protection extends clutch life

• For 2T/4T transmissions with a wet clutch

BIG TWIN TRANSMISSION OIL

Big Twin Transmission Oil is a multi-grade 4-stroke V-Twin transmission oil formulated for sliding contacts of gears in heavily loaded 4-stroke transmissions. It provides superior anti-wear, smooth shifting and reduces gear noise.

• Formulated for motorcycles with separate transmissions

• Wear protection extends gear life

• Quiets gear whine and improves shifting

• For Big Twin, air-cooled/liquid-cooled transmissions

GEAR SAVER HYPOID GEAR OIL

Bel-Ray Gear Saver Hypoid Gear Oil features Bel-Ray’s state-of-the-art Extreme Pressure chemistry to give unsurpassed protection for heavily-loaded shaft drive and final drive units. Meets or exceeds API GL-4 and GL-5 requirements. Not recommended for wet clutches.

• Formulated for gearboxes and final drive units without a wet clutch

• Smoother shifting and reduced gear whine

• Extreme Pressure additives reduce component wear

• For motorcycles and ATVs (not for wet clutches)

API GL-5

TRANSMISSION OIL CONTINUES...

SPORT TRANSMISSION FLUID

Sport Transmission Fluid has been developed for the unique demands of Harley-Davidson® Sportster® V-Twin motorcycle transmissions equipped with wet clutches. Bel-Ray Sports Transmission Fluid flows freely for better clutch cooling and provides positive clutch engagement for better starts and longer clutch life while protecting highly-loaded gears from wear, ensuring smooth shifts for more positive action.

• Formulated for the transmission and primary of Sportster motorcycles and Buell® Blast™ motorcycles

• Wear protection extends transmission life

• Prevents clutch slipping and chatter for consistent engagement

• Distinctive red color for easy leak detection

• For Sportster transmissions

Productnr Product

PRIMARY CHAINCASE LUBRICANT

Primary Chaincase Lubricant is premium motorcycle oil specially formulated for the primary chaincase of all big twin motorcycles. Ideally suited to stand up to high pressures, its exclusive Bel-Ray antiwear chemistry ensures long service life for the primary chain. Superior oxidation protection for extended performance, and prevents clutch slipping and chatter for consistent engagement. Distinctive red color makes it easier to detect leaks in multiple lubrication cavity engines.

• Formulated for primary chains and wet clutches

• Wear protection extends primary chain life and protects gears from wear

• Prevents clutch slipping and chatter for consistent engagement

• Distinctive red color for easy leak detection

• For Big Twin, air-cooled/liquid-cooled for primary chaincases

Productnr Product

55-907-001 Bel-Ray Primary Chaincase Lubricant 80W 1L

BRAKE FLUID

SUPER DOT 4 BRAKE FLUID

Bel-Ray Super DOT 4 Brake Fluid exceeds FMVSS Sec. 571.116

DOT 4 motor vehicle brake fluid, SAE J1704 and ISO 4925 specifications. Mixes with all fluids meeting DOT 3 or DOT 4 specifications. For use in all drum or disc brake systems and hydraulic clutches, except systems using mineral-based fluids (LHM).

• Formulated for hydraulic brake systems

• Mixes with all fluids meeting DOT 3 and DOT 4 specifications

• Boiling point: Dry 272°C (522°F), Wet 169°C (336°F)

FMVSS SEC, 571.116, SAE J1704, ISO 4925

SILICONE DOT 5 BRAKE FLUID

Bel-Ray Silicone DOT 5 Brake Fluid exceeds FMVSS Sec. 571.116 DOT 5 silicone base motor vehicle brake fluid specifications. Mixes with all fluids meeting such specifications. DOT 5 brake fluid may not be mixed with DOT 3 and DOT 4. DOT 5 may be used to replace either DOT 3 or DOT 4 if a complete system flush is done. For use in all drum or disc hydraulic brake systems, except systems using mineral-based fluids (LHM).

• Mixes with all fluids meeting DOT 5 specifications (not compatible with DOT 3 and DOT 4)

• Will not damage paint or absorb moisture

• For brake systems and hydraulic clutches, except systems using mineral brake fluids

• Boiling point: Dry 260°C (500°F), Wet 185°C (365°F)

FMVSS SEC, 571.116, SAE J1705

COOLANT

MOTO CHILL RACING COOLANT

Bel-Ray Moto Chill Racing Coolant is an engine coolant that uses a special non-toxic propylene glycol formula designed for better heat transfer and cooler running engines. Protects from corrosion and extends the life of all motorcycle cooling systems including those using magnesium and aluminum components. The ultimate high-performance engine coolant — especially suited for racing conditions. Do not dilute. Ready to use.

• Non-toxic, Propylene Glycol anti-freeze

• Protects aluminum and magnesium components from corrosion

• Pre-mixed, ready to use

• Compatible with all common coolants

FORK OIL

HIGH PERFORMANCE FORK OIL

Bel-Ray High Performance Fork Oil is a front suspension oil formulated for use in all suspension forks including those using cartridge and dual chamber systems. Through the use of carefully selected high-viscosity base oils, fade is reduced providing smooth operation over a wide temperature range.

Bel-Ray High Performance Fork Oil eliminates stiction and drag while greatly improving fork action.

• Formulated for front forks

• Reduces fade for smooth operation

• Eliminates stiction and drag, improving fork action

• Anti-wear and anti-foam

55-890-001

Moto Chill Racing Coolant 1L Blue

CHAIN OIL

BLUE TAC CHAIN LUBE

Bel-Ray Blue Tac Chain Lube is a high-performance, fully synthetic chain lube for all powersports chain applications. Developed with input from professional racing teams, Blue Tac Chain Lube offers an extremely tacky formula that will not fling off when used as directed. Professional racing teams and dyno tests have proven that even at speeds of 100 mph and up, Bel-Ray Blue Tac Chain Lube remains in place on your chain, providing the performance and protection you require. For racing kart applications, Blue Tac Chain Lube will ensure consistent power to the wheels with minimal power loss and clutch contamination during racing events. The tacky properties ensure TAG clutch hubs are protected from chain fling-off.

• Designed to resist fling-off (even in high speed applications)

• Wear and corrosion protection for long chain and sprocket life

• Sprays on blue, dries clear

• For chain applications, including ‘O’, ‘X’ and ‘Z’ ring units and roller chains

SUPER CLEAN CHAIN LUBE

Bel-Ray Super Clean Chain Lube is an aerosol chain lube that utilizes the latest innovation in chain lubricant technology, combining unsurpassed antiwear protection for long chain and sprocket life with an outer protective coating that will not attract dirt, sand, or grit and ABSOLUTELY WILL NOT FLING OFF when used as directed. Suitable for all ‘O’ ‘X’ and ‘Z’ ring and roller type chains for street, offroad, and racing use.

• Designed to resist fling-off (even in high speed applications)

• Protective coating dries white to ensure complete coverage

• Will not fling-off or attract dirt, sand or grit

• Wear and corrosion protection for long chain and sprocket life

• For chain applications, including ‘O’, ‘X’ and ‘Z’ ring units and roller chains

WORKSHOP

Foam Filter

Bel-Ray Foam Filter Oil is a foam air filter oil for all street, offroad, and racing foam air filter applications. Innovative Bel-Ray technology has produced a foam filter oil unlike any other. It is easy to apply and improves airflow. Ultra-viscous formula forms an oil barrier to trap micron-sized particles that can cause engine damage. Bel-Ray’s waterproof air filter oil prevents clogging when wet.

• Designed to improve air flow

• Traps microscopic particles to extend engine life

• Waterproof formula prevents clogging when wet

• For foam air filters

Waterproof Grease

Bel-Ray Waterproof Grease is the legendary high-performance, multi-purpose grease. Superior water resistance, even in salt water, will ensure continued sealing and protection. Perfect for wheel bearings, headsets, shock linkages, swing arm pivots and other motorcycle, ATV, snowmobile and marine chassis lubrication points. Due to its aluminum complex formula, it won’t melt or run out. Enhanced mechanical stability and special anti-wear additives protect and lubricate bearings for improved performance.

• Waterproof grease for all bearing and bushing applications

• Corrosion protection, even in salt water

• Wear protection extends bearing life

• Will not melt or run

6 in 1®

Bel-Ray 6 in 1 is a multi-purpose aerosol lubricant that contains anti-wear additives that provide high film strength to this exceptional penetrating and lubricating fluid. Bel-Ray 6 in 1 cleans as it lubricates, protects against rust and corrosion, displaces water, and reduces friction. Bel-Ray 6 in 1 will not harm electrical contacts, vinyl, wood or paint.

• Multi-purpose lubricant

• Cleans, lubricates, protects, displaces water, reduces friction and penetrates rust

• Safe for use on electrical contacts, vinyl, wood and paint

Our approved products are used and demanded by leading professional race teams including MotoGP, World Superbikes, British Superbikes and many more including Motocross and Karting. Developed using the latest lubricant technologies, our products offer users measurable performance improvements. Use FUCHS Silkolene and get a genuine ‘Oil Tune’.

4-STROKE MOTOR OIL

Pro 4

Formulated to meet the needs of both air and watercooled 4-stroke engines. The recommended SAE grades for the majority of motorcycle manufacturers.

PRO Ester Based Fully Synthetic API SM/SN, JASO MA2 approved

Productnr Product

551-116-001 Silkolene Pro 4 10W-40 XP 1L

551-116-004C Silkolene Pro 4 10W-40 XP 4L CUBE

551-118-001 Silkolene Pro 4 15W-50 XP 1L

551-118-004C Silkolene Pro 4 15W-50 XP 4L CUBE

551-120-001 Silkolene Pro 4 10W-60 XP 1L

551-122-001 Silkolene Pro 4 5W-40 XP 1L

551-122-004C Silkolene Pro 4 5W-40 XP 4L CUBE

551-124-001 Silkolene Pro 4 10W-50 XP 1L

551-124-004C Silkolene Pro 4 10W-50 XP 4L CUBE

Super 4

MC-Syn Technology protects the engine and transmission with advanced additive chemistry from start to full power. Detergents, dispersants and load carrying agents are incorporated to give excellent engine cleanliness and minimumzwear of moving parts. A balanced blend of inhibitors and anti-wear agents ensure correct operation of oil immersed clutches and other drive line components.

SUPER Semi Synthetic

API SL approved

Productnr Product

551-104-001 Silkolene Super 4 10W-40 1L

551-104-004C Silkolene Super 4 10W-40 4L CUBE

551-106-001 Silkolene Super 4 20W-50 1L

V-Twin

Mineral engine oil formulated for all Harley Davidson and Metric VTwins. Provides high level of engine cleanliness and protects engine components from wear and corrosion.

COMP Ester Based Premium Semi Synthetic

API SL, JASO MA2 approved

Comp 4 XP

Formulated to meet the needs of both air and water-cooled 4-stroke engines, Comp 4 10W40 XP is the recommended SAE grade for many motorcycle manufacturers.

COMP Ester Based Premium Semi Synthetic API SL, JASO MA2 approved

Productnr Product

551-108-001 Silkolene Comp 4 10W-30 XP 1L

551-110-001 Silkolene Comp 4 10W-40 XP 1L

551-110-004C Silkolene Comp 4 10W-40 XP 4L CUBE

551-112-001 Silkolene Comp 4 15W-50 XP 1L

COLOR COORDINATION

4-STROKE

PRO Ester Based Fully Synthetic

COMP Ester Based Premium Semi Synthetic

SUPER Semi Synthetic 2-STROKE

PRO Ester Based Fully Synthetic

COMP Ester Based Premium Semi Synthetic

SUPER Semi Synthetic MAINTAIN

Gear Oils

Suspension fluids, coolants, fuel additives

Brake & clutch fluids, cleaners, grease

Chain lubes & cleaners

Productnr Product

551-132-001

Quad ATV

Latest Technology providing increased power and optimum engine protection over a wide range of ambient temperatures. Stay-in-grade capability ensures consistent performance for the full oil service life.

PRO Ester Based Fully Synthetic

API SN, ACEA A3/B3, JASO MA2 approved

Productnr Product

551-134-004C

4-STROKE MOTOR OIL CONTINUES...

Scoot Sport 4

Latest Technology providing increased power and optimum engine protection for improved long term performance and reliability. SCOOT SPORT 4 5W-40 offers excellent stay-in-grade performance over a wide temperature range with outstanding anti-corrosion and anti-wear characteristics.

COMP Ester Based

Semi Synthetic API SG, SH & SJ JASO MA2 approved

Scoot Sport 4 5W-40 1L

CLASSIC

Hardwick 50

Classic/vintage SAE 50 mono-grade oil with good detergency and a high level of anti-wear additives

API SF/CD MIL-L-2104B

Productnr

551-208-004 Hardwick 50 4L

Osmaston 50

A high quality premium grade, nondetergent engine oil often preferred by owners of pre-war classic and vintage vehicles. Being a non-detergent type of lubricant it is important to ensure that the engine oil is changed at least every 1000 miles. This grade is also ideal for total loss lubrication systems used in the engines of early cars and motorcycles. OSMASTON 50 Classic may also be used as appropriate in gearboxes.

API SB

Castorene R40S

Designed for dry sump speedway engines, improves lubrication, minimizes high temperature thickening and lacquer formation. Improves lubrication and minimizes the risk of thickening and lacquer formation at high temperature. Fully soluble in methanol based fuels. MUST NOT BE MIXED WITH MINERAL OILS

FOR RACE USE ONLY PRO Ester Based Fully Synthetic

R40S 1L

Silkolube

For cherished classic motorcycles SILKOLUBE 20W-50 is a multigrade motor oil developed for economical protection of many petrol engines in classic motorcycles operating under normal service conditions over a wide range of temperatures. Advantages/ benefits: Good detergent/dispersant performance to ensure engine cleanliness, good anti-wear, antioxidation and anti-rust properties, viscosity and performance level suited to older engines

API GL3

2-STROKE MOTOR OIL

Scoot 2

MC-Syn Technology provides excellent anti-wear properties. A clean burning, low smoke formula compatible with all fuels.

COMP

Comp 2

Advanced low smoke, low ash formula reduces engine wear. Prevents piston seizure, ring sticking, plug fouling and exhaust port blockage. The latest technical advances produce an environmentally friendly low smoke lubricant. Suitable for both premix and injector systems. Mix thoroughly. Refer to handbook for mix recommendations. Compatible with all fuels

COMP Ester Based Premium Semi Synthetic

Scoot Sport 2

Synthetic Ester based, clean burning, low smoke engine oil. Optimises power and improves fuel economy. Outstanding resistance to ring sticking, plug fouling and pre-ignition. Compatible with all fuels. Suitable for both premix and injector systems.

COMP Ester Based Premium Semi Synthetic

JASO FC/FD / API TC / ISO L-EGD

Comp 2 Plus

Ultra low smoke, clean burning lubricant providing maximum performance, extra power and reliability. Compatible with all fuels. Suitable for PreMix and Injector systems.

PRO Ester Based Fully Synthetic JASO FC/FD / API, TC / ISO L-EGD

Pro 2

Ultimate engine protection, increased power, performance and reliability. Track experience at Grand Prix and international level has shown that PRO 2 is one of the very few competition oils which can provide the latest racing engines with the outstanding load-carrying and cleanliness requirements necessary for full power output even at high fuel to oil ratios. Only for use with PreMix systems. Recommended mix up to 50:1 (2%).

PRO Ester Based Fully Synthetic CIK FIA Approved

Pro KR2

SAE 30. For high output kart engines giving exceptional performance and reliability. Do not mix with other lubricants. Compatible with all fuels. Consult engine manufacturer for mix recommendations.

PRO Ester Based Fully Synthetic CIK FIA Approved

BRAKE FLUID

Pro Race Brake Fluid

Brake fluids are often forgotten but are possibly the most essential fluid in a vehicle from the safety aspect. They need checking and changing regularly to avoid brake fade and loss of efficiency. The performance of a brake fluid is generally denoted by reference to a DOT specification. Vehicle manufacturers specify the minimum performance requirements of suitable fluids by reference to this DOT spec. Commonly available products are DOT 3, DOT 4, Universal (covering the requirements of both DOT 3 and DOT 4) and DOT 5, although Racing Brake Fluids are available for competition use. Unlike most Racing Brake Fluids PRO RACE BRAKE FLUID is suitable for road use.

DOT 4. Boilingpoint (dry) 315 °C

Boilingpoint (wet) 204 °C

Min boilingpoint (wet) 195 °C

Productnr

Universal Brake & Clutch Fluid

Suitable for UK, US, European and Japanese motorcycles.

FMVSS116 DOT 5.1, DOT 4, DOT 3, ISO 4925, SAE J 1703

551-550-0005 Silkolene Pro Race Brake Fluid 500ml

FORK OIL

Fork & Suspension Fluid RSF

The FUCHS Silkolene RSF range (formerly known as Pro RSF) has replaced their standard Fork oil Counterparts. Our premium high performance RSF range, available in (2.5, 5, 7.5, 10 & 15 W) is a race/ road/track proven suspension fluid already in use and chosen by many of today's market leading suspension manufacturer's and currently already used as original equipment in many of today's modern motorcycles.

Productnr

551-470-020 Silkolene RSF 2.5 20L

551-472-001 Silkolene RSF 5 1L

551-472-020 Silkolene RSF 5 20L

551-474-001 Silkolene RSF 7.5 1L

551-476-001 Silkolene RSF 10 1L

551-478-001 Silkolene RSF 15 1L

Productnr

551-552-0005

Fork & Suspension Fluid SF20

High VI index formulation, combats friction, protects seals and resists corrosion. Ensures smooth suspension under all road and competition conditions. Grades can be mixed.

551-480-001

Synthetic Fork oil

Exceptional performance and zero drag in racing forks. Low friction synthetic additives ensure smooth, predictable action on all terrains. Reduces stickslip, minimises pressurisation at high temperature in all conditions.

SF 20 1L Productnr

551-482-001

551-484-001

Univ Brake / Clutch Fluid 500ml

TRANSMISSION OIL

V-Twin

Semi synthetic. Extreme pressure gear oil for Harley Davidson and Metric V-Twins. Providing outstanding protection over a wide temperature range and all riding conditions.

Productnr Product

551-414-001 Silkolene V-Twin 80W-90 1L

Comp Gear

Semi synthetic racing gear oil. Race proven ester synthetic formulation gives smooth gear changes, positive clutch action and reduced wear especially where aluminium clutch plates are used. SAE 80W-90. Crankcase rating SAE 10W-40.

Productnr Product

551-406-001 Silkolene Comp Gear 1L

Gear Oil Medium

Advanced gear oil for wet or dry clutch transmissions. Reduces drag, combats clutch slip and protects highly stressed components. SAE 85W-90. Crankcase rating SAE 20W-50.

GL3 / GL4 Motorcycle applications only SAE 85/ SAE 90

Productnr Product

551-404-001 Silkolene Gear Oil Medium 1L

Pro SRG 75

Fully Synthetic Racing Gear Oil. Designed to improve power and maintain consistent high performance. SAE 75W Crankcase rating SAE 10W-30. This grade has a naturally high viscosity index (ensuring good low temperature performance) and excellent shear strength, as well as possessing an inherently excellent load carrying capability. PRO SRG 75 provides very superior protection and performance under the most demanding race conditions.

Productnr Product

551-408-001 Silkolene Pro SRG 75 1L

Rhino 140

A multi-purpose mild EP gear oil for use in most types of sliding pinion gearboxes. It is particularly suited for use in light to moderately loaded reduction gears, worm gears and certain bevel gears. Widely used in the transmission and final drives of certain older cars and commercial vehicles where its viscosity and lower EP activity are appropriate. Fully compatible with bronze or brass gears, bushes and bearing cages.

API GL3

Productnr Product

551-412-005 Rhino 140 5L

Scooter Gear Oil

Packed in an easy-to-use one-shot 125ml tube, SCOOTER GEAR OIL 80W-90 is ideal for use in all scooters where an SAE 85W-90 or 80W-90 lubricant is specified. Outstanding performance in transmission drive systems of scooters and mopeds.

API GL-4

Productnr Product

551-400000125 Silkolene Scooter Gear Oil 125ml

WORKSHOP & MAINTENANCE

Foam Filter Cleaner

A highly effective, water rinsable cleaner/ degreaser formulated specifically for cleaning foam filters prior to re-oiling with FUCHS

SILKOLENE FOAM FILTER OIL. Easily removes soiling, grease and grime, extending the life of filters. FOAM FILTER CLEANER is also suitable for many other cleaning tasks including the degreasing of engine parts and the removal of stubborn oil based marks.

551-450-001

Pro Cool

Based on propylene glycol and hence gives a very safe level of toxicity when compared to ethylene glycol based anti-freezes. The ready to use formulation includes 50% distilled water to give zero lime scale deposits, optimum frost protection in severe winter conditions, plus excellent anticorrosion performance. Anti-cavitation performance exceeds that of conventional ethylene glycol based antifreezes, providing the user with superior protection against engine and coolant pump damage. Compatible with most alloys, plastics, elastomers and gasket materials used in modern engine cooling systems. Ready-to-useno dilution required.

551-458-001

Pro Cool 1L (blue) 551-458-020

Pro Cool (blue) 20L

Foam Filter Oil

Advanced, low viscosity coating treatment designed to improve the efficiency of foam air filters. Contains polymeric additives to provide a hyper-tacky surface that resists the ingress of the most pervasive sand, dust and water, without affecting engine breathing. Developed to provide outstanding engine protection even in the most severe conditions. Reduces the risk of breakdown and helps extend engine life. The chlorinated solvent-free formula will not damage the foam filter construction or air box materials.

Mag Cool

Advanced Long-Life, Magnesium Alloy Friendly, Pre-Mixed, race proven engine coolant. Offers winter protection down to -40°C. Suitable for all engines. Compatible with plastics, hoses, paint work and all metals. Contains Bittering Agent. Contains NO harmful silicates.

Brake & Chain Cleaner

A powerful cleaner for Brake & Chain components. With its powerful spray, FUCHS SILKOLENE Brake & Chain Cleaner is perfect for removing unwanted deposits from chain and brake components - leaving no oily film whilst maintaining chain and brake performance. Safe to use on seals and hoses. Directions for Use: Spray on, allow to penetrate, agitate as required and allow to dry. FUCHS strongly advise that the clean chain is lubricated with a FUCHS SILKOLENE CHAIN LUBRICANT.

Pro Chain

100% Synthetic Racing Chain Oil. Suitable for Road & Off Road Use. For high performance road, racing and off-road motorcycles. 100% synthetic chain lubricant with exceptional anti-wear and anti-corrosion properties to resist high speed fling-off. For all chains including "O" and "X" ring types. Directions for Use: Apply sparingly to the inside of a clean warm chain. For best results leave overnight before use. FUCHS strongly recommend the use of FUCHS SILKOLENE BRAKE & CHAIN CLEANER prior to use. Also available in an easy to carry mini 100ml size.

WORKSHOP & MAINTENANCE CONTINUES...

All In One

Premium, multi-purpose, moisture repellent spray with many uses which include cleaning, protecting and lubricating. For use in and around the home, garage and workshop. With excellent dewatering properties, it repels moisture, penetrates corroded threads, lubricates and even offers protection against corrosion - a valuable product for every mechanic and an essential piece of emergency kit for all bikes!

NOTE: May affect certain rubbers and plastics.

Silkopen

This graphited penetrating spray eases the dismantling of seized threaded fasteners. Can also be used to lubricate and clean cables. When used with a cable oiler, SILKOPEN penetrates the full length of the cable, forcing out dirt and corrosion, leaving a thin graphite and oil lubricating film for a silky smooth lever action.

NOTE: May affect certain rubbers and plastics.

Contact Cleaner

This powerful solvent cleaner is ideal for cleaning electrical components and other precision parts. Penetrating and quick drying, FUCHS SILKOLENE. Contact cleaner leaves no residue. Perfect for cleaning fouled plugs, dirty points and other precision parts, simply spray onto parts to be cleaned and allow to dry off. Contact cleaner is ideal for cleaning suspension and engine components during assembly, thereby ensuring maximum component life.

Titanium Dry Lube

Non fling PTFE boosted Chain Lubricant. Suitable for Road & Off Road use. This hyper strong PTFE boosted formula resists high speed fling-off while providing exceptional anti-wear and anti-corrosion performance even in severe conditions. Silkolene Titanium Dri-Gel protects your chain, leaving it with a white "as new" finish. For all chains including "O" and "X" ring types. Directions for Use: Apply sparingly to the inside of a clean warm chain. For best results leave overnight before use. FUCHS strongly recommend the use of FUCHS SILKOLENE BRAKE & CHAIN CLEANER prior to use.

Productnr Product

551-504-0005 Silkolene Titanium Dri Gel 500ml

Pro Prep

A high quality water repellent, hard surface conditioner which provides a micro nbarrier against dirt and unwanted deposits. Safe to use on all exposed bodywork to make cleaning easier. It also retards metal corrosion and inhibits the further adhesion of dirt and mud. Pro Prep gives that elusive 'factory finish' and also ensures smooth operation of plastic moving parts. Helps to waterproof and insulate ignition systems.

NOTE: Contains silicones - do not use where painting is carried out or on windscreens or visors.

Productnr Product

551-518-0005 Silkolene Pro Prep 500ml

Injector & Carb Cleaner

Solvents interact to remove internal and external gum and resin build up from carburettors and injection systems allowing smoother operation and improved engine performance. Remove air filter and start engine. With throttle part open, spray into air intake until engine begins to stall. CARB CLEANER is also suitable for cleaning throttle linkages and carburettor bodies.

WORKSHOP & MAINTENANCE CONTINUES...

Copper Paste

A superior high temperature anti-seize lubricant containing copper. Designed to control pitting, rusting, thread distortion and seizure due to corrosion and chemical attack, the product overcomes galling on assembly and reduces dismantling torque. Lowering force required during assembly, it is perfect for threaded connections, wheel nuts, spark plug threads, cylinder head bolts, exhaust systems, etc. Prevents brake squeal - apply to caliper, pins and back of pad.

Pro/RG2 Grease

An advanced, high melting point, synthetic racing grease, PRO RG2 is a multi-functional, high performance grease with exceptional heat resisting and water-proofing properties. PRO RG2 has outstanding water repellence, excellent corrosion inhibition properties and high resistance to water wash-off, making it an ideal choice for rally and watercraft use.

Renolit Copper Paste 500gr

A superior high temperature anti-seize lubricant containing copper. Designed to control pitting, rusting, thread distortion and seizure due to corrosion and chemical attack, the product overcomes galling on assembly and reduces dismantling torque. Lowering force required during assembly, it is perfect for threaded connections, wheel nuts, spark plug threads, cylinder head bolts, exhaust systems, etc. Prevents brake squeal - apply to calliper, pins and back of pad.

Renolit RHF 1

RENOLIT RHF 1 is a lithium soaped longlife EPlubricating grease based on synthetic (polyalphaolefin) oil and selected additives to improve mechanical and thermal loads. RENOLIT RHF 1 is work stable, water resistant, friction reducing, and protects against corrosion even in salty environments. RENOLIT RHF 1 is compatible with various elastomers RENOLIT RHF 1 is used for pneumatic valves of brakes and slack adjusters in commercial vehicles, and for high-speed bearings exposed to fluctuating ambient temperatures. It is suitable for lifetime lubrication.

• Long-term lubricant

• Good corrosion protection, even in presence of salt water

• Good sliding friction behaviour

• High thermal and mechanic load

• Friction reducing

• Good adhesiveness

• Water resistant

• Shear stable

• Good elastomer compatibility

Wabco, Daimler

Renolit SI410M 100g

RENOLIT SI 410 M is a non-aging silicone grease based on calcium soap.

RENOLIT SI 410 M is water-resistant and compatible with most elastomers and plastics, except of silicone caoutchouc.

RENOLIT SI 410 M is suitable for lubrication of bearings exposed to low loads within a temperature range of -55°C up to +130°C, e.g., valves, o-rings, packaging machines, bottling plants, etc.

• Good low temperature properties

• Good aging resistance

• Good compatibility with elastomers and plastics

• Low evaporation loss

• Good water resistance

Wash Off

A cost-effective spray-on / hose-off bike cleaner suitable for all street and off-road motorbikes, bicycles, quads and ATV’s.

MOTOR CHAIN

High-quality chain grease for general use. - also suitable for O-, X- and Z-ring chains. - does not leave a film on the surface to be cleaned. - excellent adhesion and stability in the chain. - convenient packaging for touring cyclists. - does not corrode sensitive materials.

PENETRATING

Loosen rusted parts with MOTIP Penetrating Oil. This oil has good penetrative properties, it contains graphite and MoS2, is moisture repellent and prevents rusting.

SILICONE SPRAY

Protect and lubricate rubber parts against freezing, drying out and plastic parts from creaking and squeaking with MOTIP Silicone Spray. Silicone spray is water-repellent, pH-neutral and resistant to the weather and weak acids and bases. Silicone spray has outstanding mechanical and thermal stability. MOTIP Silicone Spray has a directed jet-spray and is resistant to temperatures of - 50ºC up to+ 200ºC.

NEW NEW NEW NEW NEW NEW

PTFE OIL

MULTI SPRAY

Prevent creaking and squeaking and let stuck parts run smoothly again by lubricating the parts with MOTIP Multi Spray. The Multi Spray has a cleaning effect and removes oil, grease, wax and tar. MOTIP Multi Spray is a universal oil that lubricates, protects and cleans. It offers excellent penetration, is moisturerepellent, prevents rust, and leaves a protective film.

Lubricate all mechanical metal parts on your bike with MOTIP PTFE Spray. The spray maintains the lubricating effect of your bike chain, brake and gear levers and wheels. PTFE spray has excellent mechanical and thermal stability and prevents wear.

TYRE REPAIR FOAM

Use MOTIP Tyre Repair to do emergency repairs on tubeless tyres. Tyre Repair can be used without removing the tyre.

NEW

V-BELT SPRAY

Protect the v-belt of your car with MOTIP V-Belt spray to remedy and prevent slipping. Also suitable for other vehicles and machines. Spray with excellent adhesion to protect V-Belts and to remedy and prevent slipping. MOTIP V-Belt spray is dilatant (increases in volume and viscosity) and user-friendly and gives lasting protection. MOTIP V-Belt Spray delays the wear, conditions V-belts and is resistant to the weather.

COPPER SPRAY

Prevent wear and sticking of screwed connections exposed to very high temperatures with MOTIP Copper Grease. Copper Grease has high thermal stability and is corrosion preventive. MOTIP Copper Grease is resistant to temperatures of - 40°C up to + 1.100°C.

NEW NEW NEW NEW NEW

FREEZER

Loosen pressed connections such as crankshafts and fastening materials (screws, bolts and nuts) with MOTIP Freezer. MOTIP Freezer briefly decreases temperature to -50°C to loosen pressed connections and has a precise jet spray.

WHITE GREASE

Let stuck parts, hinges, bearings, springs and many more application run smoothly again with White Grease containing PTFE. Spray Grease has excellent adhesion and high viscosity to lubricate mechanical parts of metal or plastic. White grease has outstanding mechanical and thermal stability and is resistant to the weather and weak acids and bases. White grease is water-repellent and pH neutral. White grease contains PTFE (polytetrafluoretheen) and prevents wear and sticking. MOTIP White Grease is resistant to temperatures of - 30°C up to + 160°C

VASELINE SPRAY

Lubricate and protect parts such as screws, bolts and ultra-light materials with MOTIP Vaseline Spray. Vaseline Spray is water-repellent, pH-neutral and resistant to the weather and weak acids and bases. Vaseline Spray is a universal, transparent, lubricant and preservative with excellent adhesion.

GASKET REMOVER

Remove dried adhesives and seals, as well as hardened sealing material quickly and easily from car and machine parts with MOTIP Gasket Remover. Suitable for Cylinder heads, gearboxes, exhausts, carters, plumbing, water and oil pumps and electric motors. MOTIP Gasket Remover has excellent dissolving properties, is non-conductive, noncorrosive, is highly viscous, and user-friendly with a precise spray.

LEAK DETECTOR

Easily find leaks in gas pipes with MOTIP Leak Detector. Leak detector is non-flammable and non-corrosive. Leak detector can be removed with water and is environmentally-friendly. Leak detector is slightly foaming and slightly basic. MOTIP Leak Detector is DVGW-certified, number NG/5170BR0105.

ENGINE CLEANER

Clean engines of vehicles and machines with MOTIP Engine Cleaner. Engine Cleaner has high dissolving properties without leaving a residue. It is also nonconductive and non-corrosive.

NEW NEW NEW NEW NEW

CARBURETTOR CLEANER

Clean the inside and outside of carburettors, butterfly valves and drain valves without disassembling with MOTIP Carburettor Cleaner. It has high dissolving properties, leaves no residue, is non-corrosive and has a precise jet-spray.

POWER BRAKE CLEANER

Easily remove dirt off your brakes with MOTIP Brake Cleaner. Brake Cleaner can be used on drum brakes, disc brakes, brake linings, calipers and brake shoes. The brake cleaner has excellent dissolving properties, leaves no residue and is non-conductive and non-corrosive. MOTIP Brake Cleaner has a powerful jet-spray and can be used in various positions.

BRAKE CLEANER

Easily remove dirt off your brakes with MOTIP Brake Cleaner. Brake Cleaner can be used on drum brakes, disc brakes, brake linings, calipers and brake shoes. The brake cleaner has excellent dissolving properties, leaves no residue and is non-conductive and non-corrosive. MOTIP Brake Cleaner has a powerful jet-spray and can be used in various positions.

BRAKE FLUID

BLOOD

High-quality hydraulic oil based on mineral oil. Every HYMEC is filled with MAGURA Blood. Container size: 100 ml and 1 Litre

Productnr

363-072-1820 Magura Blood clutch oil 100ml

363-072-1821 Magura Blood clutch oil 1L

ROYAL BLOOD NEW

LCF600+ BRAKE FLUID

LCF 600 Plus fluid is commercially available, although it is recommended for track use: since it has a high hygroscopic level, it has a limited lifespan. This depends on several factors, but it usually ranges from 2,000 to 4000 km (1242 to 2485 miles). It can be mixed with other DOT3 and DOT4 racing fluids but should not be used in brake systems with magnesium part

NEW NEW

SPORT EVO BRAKE FLUID

The Brembo Sport Evo 500++ DOT4 fluid, on the other hand, has a dry boiling point of 270°C (518° F) and is recommended for road use without compromising performance. Its excellent properties help it to reach a high mileage before it has to be replaced, usually from 12,000 to 24,000 km (7456 to 14912 miles). However, it is not for brake systems designed for mineral fluids.

NEW

HTC 64 T BRAKE FLUID

• Exclusively for racing use

• Brembo Racing HTC 64T has been specifically formulated to provide the highest performance under all racing conditions

4-STROKE MOTOR OIL

DIESEL ENGINE OIL 15W-40

Specialized oil for 4 stroke engines with or without a turbocharger. A customized additive ensures a stable operation on hard loaded engines in a demanding environment. The oil contains excellent corrosion inhibitors that prevents corrosion from fresh and salt water. This high quality oil provides maximum protection against wear and prevents buildup of deposits in the engine's internal parts.

Specifications

• SAE grad(er): 15W-40

• API: C1-4/CG-4/ CF-4/CF/SL

• ACEA: 04-E7/ A3/B3/ B4

• Volvo: VDS 3

Productnr Product

117-6-2402-1 Diesel engine oil 15w40 1L, Replaces: 3840002

117-6-2402-208 Diesel engine oil 15w40 208L Drum

117-6-2402-20 Diesel engine oil 15w40 20L Bag-in-box Replaces: 22479643

117-6-2402-5 Diesel engine oil 15w40 5L, Replaces: 3840003

COMPRESSOR OIL

COMPRESSOR OIL ISO VG 80

“The product is ash free, which means that soot residues are not formed on the internal moving parts of the engine. The oil is temperature-stable, which provides an easy start winter time and ensures a cool operation summer time. The product is suitable for most piston compressors.

Specifications

• ISO VG80”

Productnr Product

117-6-2404-025 Compressor oil ISO VG 80

Drain tap

Drain tap for easy usage of the 20 liters Bag-in box.

Productnr Product

117-6-2417 Drain tap 20L Bag-in-box

TRANSMISSION OIL

GEAR OIL MINERAL 80W-90

Transmission oil constructed for gears operating under very tough circumstances. The product is a mineral oil based hypoid oil which contains heavy amounts of EP-additives. The oil has a very broad application area e.g gears and switches and other uses where SAE 90/API GL-5 oil is recommended.

Technical data

• SAE degree(s): 80W-90

• Viscosity at 40 C: 190 mm /s

• Viscosity at 100C: 18.1 mm/s

• Temperature range: -25C - 160C

• Type: API-GL5

ATF DEXTRON III OIL

Dextron-type ATF oil is designed for power trims, trim tabs and automatic gearboxes. The excellent low and high-pressure properties of the product ensures an excellent function under varying operating conditions. The product is highly oxidative stable, which results in a long life-span. The oil has low volatility and is gentle to all types of gaskets and seals. The product is recommended for all types of automatic and manual transmissions where an ATF oil is recommended.

Specifications

• GM: Dextron III-G

• ZF: TE-ML

Productnr Product

117-6-2418-1 Gear oil Mineral 80w-90 1L

117-6-2418-20 Gear oil Mineral 80w-90 20L, Replaces OEM: 3809444

117-6-2418-5 Gear oil Mineral 80W-90 5L

117-6-2406-1 ATF dextron III oil 1L, Replaces: 85122800

117-6-2406-5 ATF dextron III oil 5L, Replaces: 1161995

SYNTHETIC GEAR OIL 75W-140

Synthetic gear oil designed to withstand both high and low temperatures in difficult operating conditions. The product contains well-balanced additives and is intended for all types of transmissions where an EP lubricant is recommended. The oil does not foam, can handle extreme pressures and possesses good anti-emulsion properties.

Specifications

• SAE grad(er): 75W-140

• API: GL-5

• MIL: MIL-L-2105

Recommended for Mercruiser, Volvo DPH 1,59:1, DPG.

Productnr Product

117-6-2405-1 Synthetic gear oil 75w140 1L

117-6-2405-5 Gearhouseoil Synthetic 75W-140 5L, Replaces: 3809439

117-6-2405-20 Synthetic gear oil 75w140 20L Bag-in-Box

SYNTHETIC GEAR OIL 75W-90

Synthetic gear oil designed to withstand both high and low temperatures in difficult operating conditions. The product contains well-balanced additives and is intended for all types of transmissions where an EP lubricant is recommended. The oil does not foam, can handle extreme pressures and possesses good anti-emulsion properties.

Specifications

• SAE grad(er): 75W-90

• API: GL-5

Recommended for most AQ-drives, IPS and Outboards.

Productnr Product

117-6-2403-020 Synthetic gear oil 75W-90 200ml

117-6-2403-1 Synthetic gear oil 75w90 1L, Replaces: 22479650

117-6-2403-5 Synthetic gear oil 75w90 5L, Replaces: 22479648

117-6-2403-20 Synthetic gear oil 75w90 20L Bag-in-Box Replaces: 22479647

117-6-2403-208 Växelhusolja syntetisk 75W-90 208L Drum

GREASE & LUBRICANTS

PROPELLER SHAFT GREASE

This grease is a so-called complex grease based on synthetic based oils. The product is extremely water resistant and is an excellent choice for a large number of different applications. Handles high loads and temperatures. This grease is resistant to many types of solvents, acids etc. and has a very good mechanical stability. Excellent for shaft bushings and propeller axles etc.

Specifications

• NLGI 3 Replaces: 3809449

Productnr Product

117-6-2407 Propeller shaft grease NLGI 3, 500gram

UNIVERSAL GREASE

This grease is a so-called complex grease based on synthetic based oils. The product is extremely water resistant and is an excellent choice for a large number of different applications. Handles high loads and temperatures. This grease is resistant to many types of solvents, acids etc. and has a very good mechanical stability. Excellent for a variety range of applications and conditions.

Specifications

• NLGI 2

Productnr Product

117-6-2408-020 Universal grease 20 gram tube, Replaces: 828250

117-2408-400 Universal Grease NLGI 2 400gram cartridge, Replaces: 21347121

PETROL ENGINE OIL

A high quality oil made of a synthetic based blend. This Long life oil ensures efficient lubrication at varying levels of operating temperatures and loads. It also contains wearresistant additives that keeps the engine clean from harmful slag products which benefits the life of both the oil as well as the engine.

Specifications

• SAE grad(er): 5W-30 Longlife

• API: SM/CF

• ACEA: 04-A3/B3

• MB 229.51,

• Porsche C30,

• VW 502.00/503.01/504.00/505.00/505.01/506.00/506.01/507. 00, BMW LL-04

Recommended for inboard and outboard engines

Productnr Product

117-6-2401-1 Petrol engine oil 5w-30 1L, Replaces: 21363429

117-6-2401-5 Petrol engine oil 5w-30 5L, Replaces: 21363430

117-6-2401-20 Petrol engine oil 5w-30 20L Bag-in-Box Replaces: 21363431

117-6-2401208 Petrol engine oil 5W-30 208L

PLATINUM ULTOR PLUS 15W-40

FEATURES

A new generation of mineral oil for year-round use. The oil has been developed for todayʼs modern heavy-duty diesel engines.

• Full engine power even in extreme conditions

• Clean engine

• Reduced fuel and oil consumption

• Smooth performance between oil changes

• Lower TCO

• Environment friendly

Platinum Ultor Plus 15W-40 is designed for modern diesel engines that meet Euro V standards and have SCR catalytic converters.

Platinum Ultor Plus is also ideal for older engines that meet Euro IV, III, II and I standards.

Quality class: API: CI-4/CH-4/CG-4/SL/SJ

ACEA: E7/E5/E3/B4/B3/A3

Viscosity: SAE 15W-40

APPROVALS

MAN M 3275-1

Volvo VDS-3

Mack EO-N

Renault VI RLD-2

Cummins CES 20071/72/75/76/77/78

MTU Type 2

TEDOM 258-3

AVIA - Engine type: 712, D407, D421.76, D421.85

Meets requirements:

MB-Approval 228.3

MB-Approval 229.1

Volkswagen 505.00

Scania

(Scania Euro III and Euro IV engines with oil change interval of 60,000 km)

DAF EUR 2 i EUR 3

Iveco

Deutz DQC-III-05

Mack EO-M Plus

Detroit Diesel 7SE 270

Caterpillar ECF-1a

PLATINUM ULTOR FUTURO 15W-40

FEATURES

A new generation of mineral oil for year-round use. The oil has been developed for todayʼs modern heavy-duty diesel engines.

• Full engine power even in extreme conditions

• Thanks to Mid SAPS technology, the filters stay clean longer.

• Anti-corrosion

• Allows longer service intervals

• Meets emission requirements for harmful substances

Platinum Ultor Futuro 15W-40 is designed for all types of diesel engines that meet Euro V standards and have EGR / SCR, DOC and DPF catalytic converters.

Platinum Ultor Futuro is suitable for extending the life of fixed filter systems.

Quality class: API: CJ-4/CI-4 Plus/CI-4/SM/CF

ACEA: E9, E7

Viscosity: SAE 15W-40

APPROVALS

MAN M 3575

Volvo VDS-4, Volvo VDS-4.5

Mack EO-O Premium Plus Renault RVI RLD-3

Cummins CES 20081

MB-Approval 228.31

Meets requirements:

MTU Type 2.1 Caterpillar ECF-2, ECF-3 DDC 93K218

Global DHD-1

JASO DH-1, 2

MAZ

Isuzu

55-600-060

4-STROKE MOTOR OIL

GARDEN SAE 30

High-quality engine oil for lawn mowers. X1-R with additives guarantees better resistance to surface pressure than standard engine oil.

Mineral oil

Productnr Product

553-83051 Garden SAE 30, 0,6L , (Mineral oil - X1-R)

553-83052 Garden SAE 30, 1,5L , (Mineral oil - X1-R)

5W-30

NEW NEW

2-STROKE MOTOR OILS

GARDEN 2T

NEW

Greentek Lubricants high-quality fully synthetic 2-stroke oil for year-round use for chainsaws and clearing saws. Perfectly suitable for winter use, also for fresh and mixed lubrication. Suitable for all 2-stroke engines where the best lubrication properties are required. In the bottle, a dosing measure, which makes it easier to make the fuel mixture.

2-S Synthetic JASO FD, API TC, ISO GD++, ROTAX 253

Greentek is a high-quality synthetic motor oil for year-round use. X1-R with additives guarantees better resistance to surface pressure than standard engine oil. Suitable for small air-cooled engines (lawn mowers, generators, garden tractors, garden tillers, snow blowers).

Semi-Synthetic API SG JASO MA/MA2

Productnr Product

553-83053 Greentek 5W-30, 1L (Semi-Synthetic - X1-R)

OUTBOARD ENGINE

NEW

Mineral-based special oil for four-stroke boat engines. The effective X1-R additive reduces friction and reduces the wear of parts. Oils anti-corrosion features provide excellent protection for gasoline and diesel engines of boats.

Mineral oil

SAE 10W-30, NMMA FC-W, JASO MON, API SL Productnr

553-83049

Garden 2T, 0,5L , (2-S Synthetic)

553-83056

553-83057

Outboard engine 10W30, 1L , (Mineral oil - X1-R)

Outboard engine 10W30, 4L , (Mineral oil - X1-R)

LUBE TRANSMISSION OIL

GEAR GREASE

High-quality bevel gear grease for clearing saws. Contains X-1R additive which reduces friction, thus improving the service life of the gearbox. Suitable for clearing saws with angle gear. Easy-to-squeeze plastic bottle.

Productnr Product

553-83048 Greentek Gear Grease, 150g , (Bottle- X1-R)

GARDEN 5W-50 HST

High quality hydrostatic oil (HST). Contains X-1R additive which reduces friction, thus improving the service life of the gearbox. The oil is suitable for riding mowers with hydrostatic transmission.

Hydrostat Oil, Mineral API GL-4/GL-5 + LS

BIO PRO CHAIN OIL

High-quality special chain oil suitable for use by professional lumberjacks. Excellent lubrication properties. Used for lubrication and maintenance of chains of chainsaws and cables. Excellent anti-oxidation and anticorrosion properties and high film strength (sticking well to metal parts of the machinery). Perfect fit for combustion engine saws and electric saws.

Productnr Product

553-83054 Greentek Bio Pro Chain Oil, 1,5L , (Bio Oil)

EURO CHAIN OIL

High-quality special chain oil suitable for use by professional foresters. Excellent lubricating properties. Used to lubricate and maintain chains of chainsaws and ropes. Excellent oxidation and anti-corrosion properties and high film strength (adheres well to metal parts of the machine). Ideal for internal combustion engine saws and electric saws. It is well suited to winter conditions, withstanding temperatures down to -30 C.

Mineral oil

Productnr

553-83050

Productnr

553-83055

Greentek Garden 5W-50 HST, 1L , (Transmission-, Hydrostat Oil, Mineral - X1-R)

Euro Chain Oil, 5L , (Mineral oil)

OUTBOARD LOWER UNIT

Mineral-based special gear oil for boat engines, intended for the lubrication of boat traction devices and bevel gears of outboard motors. The effective X1-R additive reduces friction and reduces wear on parts. The oil tolerates wet conditions very well, protecting components from corrosion.

Mineral oil

SAE 80w90, API GL-5, MIL-L-2105DL

Productnr

553-83058

553-83059

Greentek Outboard lower unit 80W90, 250ml, (Mineral oil - X1-R)

Greentek Outboard lower unit 80W90, 1L, (Mineral oil - X1-R)

4-STROKE MOTOR OIL 2-STROKE MOTOR OIL

SUPER PREMIUM SYNTHETIC BLEND

Marine engines are often operated in harsh, saltwater environments that are much more demanding than the conditions faced by most automotive engines. Accordingly, their engine oil must be up to the task. Pro Star Super Premium Synthetic Blend 4 Stroke Oil is specifically designed for high performance 4 stroke outboards, gasoline inboards and stern drives. One of the first 4 stroke oils to be certified under NMMA’s new FC-W category. Meets or exceeds all criteria for viscosity, filter plugging, foaming and aeration. Successfully passed NMMA’s 100-hour general performance engine test.

Features

• Surpasses API requirements for SJ, CF-4 and CH-4.

• Premium, synthetic blend engine oil designed for 4 stroke highperformance outboards, gasoline inboards and stern drives.

• Additive package optimizes engine cleanliness, prevents sludge build up,

• Shear-stable polymer additives plus synthetic base stocks maintain proper viscosity under extremely harsh marine conditions.

• Synthetic/organic blend assures excellent low-temperature properties for quicker starts.

• Provides maximum protection in severe, high rpm applications.

• Marine engines typically operate at higher rpms than automotive engines, requiring an oil that is specifically designed and formulated to provide protection under these higher temperature, higher stress circumstances.

Productnr Product

136-28100 10W-30 = 3,78L

136-28132 10W-30 = 1L

136-28200 10W-40 = 3,78L

136-28232 10W-40 = 1L

136-28300 25W-40 = 3,78L

136-28332 25W-40 = 1L

PREMIUM ENGINE OIL TC-W3

Premium TC-W3 combines an extremely high-grade syntheticblend base stock with a custom additive package that equals or exceeds all OEM oils. The result is first-rate performance and protection at an affordable price. It is ideal for use in all 2-cycle engines, to include personal watercraft, pre-mix and directinjection designs. It meets or exceeds all engine manufacturer specifications and it will not void any engine warranties.

Features

• Synthetic blend ashless formula minimizes piston ring sticking and protects against pre-ignition problems.

• Environmentally friendly, clean burning oil that reduces emissions.

• Engineered for operation under extreme conditions.

• For use in oil injection, 2 cycle and pre-mix engines.

Productnr Product

136-19000 3,78L

136-19016 500 ml

136-19032 1L

SUPER PREMIUM ENGINE OIL TC-W3

Super Premium TC-W3 combines an extremely high-grade synthetic-blend base stock with a custom additive package. The result is the best synthetic-blend TC-W3 oil available that equals or exceeds all OEM oils. It will not void engine warranties, meets or exceeds all engine manufacturer specifications and provides first-rate performance and protection at an affordable price. Super Premium TC-W3 contains a higher concentration of the additives found in Premium TC-W3. It is ideal for use in high-performance engines, including FICHT, E-TEC, Optimax and HPDI outboards. It is ideal for use in all 2-cycle engines, to include personal watercraft, pre-mix and direct-injection designs.

Features

• Exceeds performance specifications for E-Tec, FICHT, Optimax and HPDI engines.

• Contains PIB viscosity modifier to greatly improve lubricity and to reduce smoking.

• High-detergent formula removes deposits from fuel delivery system.

• Synthetic blend ashless formula minimizes piston ring sticking and protects against pre-ignition problems.

• Environmentally friendly, reduces emissions.

Productnr Product

136-19200 3,78L

136-19232 1L

MOTOR OIL

PRO STAR SUPER PREMIUM HEAVY DUTY -SAE 30

Pro Star Super Premium Heavy Duty Motor Oil SAE 30. Recommended for engines requiring API CF-2 level performance Exceeds warranty requirements for all diesel and gasoline engines specifying SAE 30 grade and API service classification including Catepillar, Cummins, Detroit Diesel, Mack, Navistar and Volvo Exceeds Mack EO-K/2 and Allison C4 specifications and CID; A-A- 52306A requirements API Service Classifications; CF-2, CD-II, CD, CF, CE/SJ, SH and SG Heavyduty formulation minimizes engine wear to provide long-engine life.

Features

• Exceeds OEM requirements-will not void engine warranty.

• Recommended for engines requiring API CF-2 level performance.

• Exceeds warranty requirements for all diesel and gasoline engines specifying SAE 30 or SAE 40 grade and API service classification including Caterpillar, Cummins, Detroit Diesel, Mack, Navistar, MAN and Volvo.

• Exceeds Mack EO-K/2 and Allison C4 specifications and CID; A-A52306A requirements.

• API Service Classifications; CF-2, CD-II, CD, CF, CE/SJ, SH and SG.

• Heavy-duty formulation minimizes engine wear to provide long engine life.

PRO STAR SUPER PREMIUM HEAVY DUTY -SAE 40

Pro Star Super Premium Heavy Duty Motor Oil SAE 40. Recommended for engines requiring API CF-2 level performance Exceeds warranty requirements for all diesel and gasoline engines specifying SAE 40 grade and API service classification including Caterpillar, Cummins, Detroit Diesel, Mack, Navistar and Volvo. Exceeds Mack EO-K/2 and Allison C4 specifications and CID; A-A52306A requirements API Service Classifications; CF-2, CD-II, CD, CF, CE/SJ, SH and SG.

Features

• Recommended for engines requiring API CF-2 level performance.

• These oils equal or exceed the performance of all national brands of oil.

• Exceeds warranty requirements for all diesel and gasoline engines specifying SAE 30 or SAE 40 grade and API service classification including Caterpillar, Cummins, Detroit Diesel, Mack, Navistar, MAN and Volvo.

• Exceeds Mack EO-K/2 and Allison C4 specifications and CID; A-A52306A requirements.

• API Service Classifications; CF-2, CD-II, CD, CF, CE/SJ, SH and SG.

• Heavy-duty formulation minimizes engine wear to provide long engine life

PRO STAR SUPER PREMIUM HEAVY DUTY -SAE 15W 40

Pro Star Super Premium Heavy Duty Motor Oil SAE 15. Heavyduty formulation minimizes engine wear to provide long-engine life. Exceeds the highest performance specifications for engines requiring CI service. Recommended for engines requiring API CI level performance. Exceeds warranty requirements for all diesel and gasoline engines specifying SAE 15W40 grade and API service classification including; Catepillar, Cummins, Detroit Diesel, Mack, Navistar and Volvo Recommended for applications requiring ACEA E3, E5, MB228.3, Cummins CES 20077, 20076, 20072 & 20071, DDC/MTU Type 1 and 2, Mack EO-M Plus, EO-M and EO-L Plus, Volvo VDS and VDS-2, Allison C4, JASO DH1, MAN 271 and 3275 and Global DHD-1 performance API Service Classifications; CJ-4, CH-4, CG-4, CF-4, CF, CE, CD/SJ, SH and EC.

Features

• Exceeds OEM requirements, will not void engine warranty.

• Recommended for engines requiring API CI level performance.

• Exceeds warranty requirements for all diesel andgasoline engines specifying SAE 15W-40 grade and API serviceclassification including Caterpillar, Cummins, Detroit Diesel, Mack, Navistar, MAN and Volvo.

• Recommended for applications requiring ACEA E3 & E5, MB228.3, Cummins CES 20077, 20076, 20072 & 20071, DDC/ MTU Type 1 & 2, Mack EO-M Plus, EO-M & EO-L Plus, Volvo VDS & VDS-2, Allison C4, JASO DH1, MAN 271 & 3275 and GlobalDHD-1 performance.

• API Service Classifications; CJ-4, CH-4, CG-4, CF-4, CF, CE, CD/SJ, SH and EC.

• Heavy-duty formulation minimizes engine wear to provide long engine life.

• Exceeds the highest performance specifications for engines requiring CJ-4 service.

GREASE & LUBRICANT

POWER TRIM AND TILT FLUID

Features

• Exceeds OEM warranty requirements Formulated to provide consistent (no-fade) performance in all marine trim and tilt applications.

• These products exceed all engine manufacturers specifications and are designed specifically for the marine environment.

• Enhanced to protect seals, hoses and other components from drying, cracking or corroding.

• Anti-foam, anti-wear, anti-oxidation and advanced stabilizing additives assure optimum performance in hydraulic trim tabs, power tilt and power steering systems.

• Viscosity: 8 - 10 cSt @ 100C - ISO 68

LOWER UNIT GEAR LUBE 80W 90 SYNTHETIC BLEND

Synthetic Blend High Viscosity 80W 90 for API GL-5, MT-1 service SAE J2360, Mack GO-J. For long term performance synthetics are the best choice.

Features

• Special extreme pressure and anti-wear additives

• Recommended for all engines over 100 hp

• Protects against rust & corrosion; great thermal stability

• Recommended for all engines over 100 hp Protects against rust and corrosion.

• Refer to Manufacturer’s Engine Service Manual for flushing and filling instructions. If none are available: 1) Remove upper and lower plugs on lower unit gear case and completely drain old oil. 2) Install fill tube into lower hole. We recommend using Star brite Lower Unit Quart Pump (#27400, Lube Tube (#28600) and Adaptor (#28401, #28402) for easy installation. 3) Slowly refill unit with new lubricant until fluid appears at the lip of the upper hole. 4) Replace upper plug and tighten securely. 5) Remove fill tube from lower hole and replace lower plug. Tighten securely.

WHEEL BEARING GREASE

Superior rust and corrosion protection from salt water, salt air and atmospheric chemicals.

Features

• Recommended for corrosive marine applications - trailer wheel bearings, water pumps, hinges, pins, winches, anchor chain reels.

• Special water-insoluble formula is highly resistant to wash-out. N.L.G.I. #2.

LOWER UNIT GEAR LUBE 80W 90 HIGH VISCOSITY

High Viscosity Lower Unit Gear Lube 80W 90 for MIL-PSF-2105E, API MT-1, API GL-5, MACK GO-J, MACK GO-H.

Features

• Formulated with special anti-wear additives, rust and corrosion inhibitors.

• For lower units of all outboard motors and stern drives.

• Directions

• Refer to Manufacturer's Engine Service Manual for flushing and filling instructions. If none are available: 1) Remove upper and lower plugs on lower unit gear case and completely drain old oil. 2) Install fill tube into lower hole. We recommend using Star brite Lower Unit Quart Pump (#27400, Lube Tube (#28600) and Adaptor (#28401, #28402) for easy installation. 3) Slowly refill unit with new lubricant until fluid appears at the lip of the upper hole. 4) Replace upper plug and tighten securely. 5) Remove fill tube from lower hole and replace lower plug. Tighten securely.

Productnr

1L

OTHER PRODUCTS

ADAPTOR FITTING FOR NISSAN, YAMAHA, TOHATSU, HONDA

Adaptor Fitting for Nissan/Yamaha/ Tohatsu and Honda Lower Unit.

Features

Adapters are made from brass and chrome plated to withstand the marine enviroment.

These adapters fit Lube Tube # 28600 and Lower unit quart pump # 27400.

Productnr

136-28401

LOWER UNIT QUART PUMP

Lower Unit Quart Pump fits standard quart plastic bottles and flexible hose to get to hard-to-reach fill plugs.

Features

• Metal threaded fitting fits Mercruiser, OMC, Evinrude, Johnson, Honda (7090hp), Volvo, Force and Gamefisher lower units.

• You will need adapter fitting ITEM: 28401 for Yamaha, Nissan, Tohatsu & Honda Lower Units (2-50 hp).

• You will need adapter fitting ITEM: 28402 for Suzuki engines.

Productnr

Product

136-27400 Lower Unit Quart Pump

ADAPTOR FITTING FOR SUZUKI, HONDA LOWER UNIT

Adaptor Fitting for Suzuki and Honda Lower Unit.

Features

These adapter are made of solid brass and chrome plated to withstand the marine environment.

These adapters fit Lube Tube # 28600 and Lower unit quart pump # 27400

Productnr

136-28402

PREMIUM LOWER UNIT LUBRICATION KIT

1000ml #27032, Pump #27400 Fills all the requirements and does not remove the warranty Recommended for use Yamaha®, Mercury®, Mercruiser®, Johnson®, Evinrude®, Suzuki®, OMC®, Force®, Tohatsu®, Nissan®, Volvo®

Productnr

136-29030

Product

Premium Lower Unit Lubrication Kit

4-STROKE

MOTOR OIL

MARINE SYNTHETIC OIL

AMSOIL Synthetic Marine Engine Oil is a premium synthetic formulation designed to withstand the heat and stress of high-rpm operation and deliver excellent wear protection. It protects against rust and corrosion during periods of inactivity and long-term storage to keep your engine protected, even when it’s not running.

AMSOIL Synthetic Marine Engine Oil is perfect for hardcore anglers and boating enthusiasts who demand the best protection for their marine engines.

SYNTHETIC ATV/UTV MOTOR OIL

AMSOIL Synthetic ATV/UTV Motor Oil is formulated to deliver upgraded performance for hard-working and performance ATVs and UTVs. Its outstanding severe-service formulation allows riders to confidently and safely push their machines to the limit, whether tackling tough chores around their property or riding aggressively on the trail.

POWER SPORTS OIL

• Specially formulated for four-stroke powersports engines

• Delivers quick startup protection

• Helps prevent carbon/varnish formation

• Easy cold-weather starts

• Wet-clutch compatible

• Anti-rust fortified for superior rust protection

GREASE

SYNTHETIC WATER-RESISTANT GREASE

Superior Lubrication and Protection in Automotive, Powersports and Industrial Applications. Resists water washout and degradation. Unparalleled protection for boat trailer wheel bearings and other components frequently exposed to water. Stays in place, lubricates and protects against rust.

2-STROKE MOTOR OIL

SYNTHETIC INJECTOR OIL

• Ideal for outboard motors and snowmobiles

• Protects against rust and wear

• Controls deposits

• -60°F (-51°C) pour point

TRANSMISSION OIL

SYNTHETIC ATV/UTV POWERTRAIN FLUID

AMSOIL Synthetic ATV/UTV Powertrain Fluid is designed for enthusiasts who want the best protection against wear and performance-robbing deposits.

SYNTHETIC ATV/UTV FLUID

AMSOIL Synthetic ATV/UTV Transmission & Differential Fluid is engineered to deliver upgraded performance for hard-working and performance ATVs and UTVs. Its outstanding severe-service formulation allows riders to confidently and safely push their machines to the limit, whether tackling tough chores around their property or riding aggressively on the trail.

HP MARINE SYNTHETIC

Excellent for Evinrude® E-TEC™ factorylean setting (replaces Evinrude XD100™ 2-Cycle Oil). Helps prevent deposits, protects against wear, has low smoke, protects against rust and has low aquatic toxicity. Superior performance as an injection oil or at 50:1 pre-mix.

SEVERE GEAR SYNTHETIC GEAR LUBE

SEVERE GEAR is designed for those who demand the best. Engineered with high film strength for highload demands. Reduces friction and provides the ultimate protection against wear. Excels in extreme temperatures. Helps maintain efficiency and outperforms conventional gear oils.

OILS AND LUBRICATION

SYNTHETIC-BLEND MARINE ENGINE OIL

Engine performance and reliability are key to a successful day fishing or boating. High-rpm operation and constant exposure to water, however, invite engine wear and formation of rust and corrosion, reducing engine performance and life. AMSOIL 25W-40 Synthetic Blend Marine Engine Oil guards against wear while delivering excellent protection against rust and corrosion. It is Warranty Secure® and will not void your marine engine’s warranty.

55-652-001 Amsoil 25W-40 Synthetic-Blend Marine Engine Oil 946ml

UNIVERSAL SYNTHETIC MARINE GEAR LUBE

True marine gear performance. Provides superior protection from shock loading. Resists foam and retains extreme-pressure qualities even when subjected to 10% water contamination. For use in outboard lower units, sterndrives, V-drives, bow and tunnel thrusters and marine transmissions Excellent for use in ATVs.

55-653-001 SAE 75W/80W-90 Universal Synthetic Marine Gear Lube 946ml

55-653-020 SAE 75W/80W-90 Universal Synthetic Marine Gear Lube 18,93L

55-653-295 SAE 75W/80W-90 Universal Synthetic Marine Gear Lube 295ml Productnr Product

ENGINE & FUEL TREATMENTS

GASOLINE STABILIZER

Helps keep fuel fresh for up to 12 months. Fights oxidation to prevent the formation of varnish and sludge and keep floats and injectors clean for optimal engine performance. Ideal for stored seasonal equipment such as snowmobiles, lawnmowers, motorcycles and boats. Eases starting process when equipment is taken out of storage.

POWER FOAM

AMSOIL Power Foam® (APF) improves engine performance by removing gum, varnish and carbon deposits that affect power, operation, idle and fuel economy. Power Foam cleans intake valves, intake manifolds and throttle plates to keep the combustion intake system running at peak efficiency. Effective in both two- and four-stroke gasoline engines, Power Foam helps reduce engine ping and keeps carburetors and injector systems operating like new.

FOGGING OIL

A highly-effective rust preventative designed to protect internal engine components during storage or long periods of inactivity. Ideal for outboard motors, lawn and garden equipment, motorcycles, snowmobiles, ATVs, motor homes and generators or any equipment with a two- or four-stroke engine.

QUICKSHOT

Premium fuel additive formulated to thoroughly clean and restore peak performance in small engine and powersports equipment fuel systems. Productnr

55-658-273 Amsoil Quickshot 236ml

METAL CARE

METAL POLISH

AUTOSOL® METAL POLISH for all metal parts; chrome, brass, copper, nickel, stainless steel, etc. Cleans, polishes, protects and removes rust. Gives a brilliant shine and a lasting weather protection.

Apply thinly and polish with a soft cloth. For polishing metal on; cars, trucks, motorcycles, bicycles, lamps, candlesticks, musical instruments, watches, metal furniture, moulds, etc. Not recommended for decorative gold / silver plating.

495-1-0002

METAL POLISH LIQUID

AUTOSOL® METAL POLISH LIQUID cleans, restores and polishes all metals to a brillant finish. As it cleans it also protects against future rust and tarnishing. Highly concentrated liquid is easy to apply especially on larger surfaces.

Application: Shake well, apply with a soft clean cloth. Buff to a mirror finish with a clean, soft dry cloth.

Note: Ideal for removing small scratches and cleaning of fiberglass, glass and some plastics.

Productnr Product

495-1-0003 Autosol Metal Polish liquid 250ml

Productnr Product

495-1-0001 Autosol Metal Polish tube 75ml

495-1-0002 Autosol Metal Polish can 750ml

ACRYLIC POLISH TUBE

AUTOSOL® ACRYLIC POLISH is a specialised product to remove scratches from acrylic surfaces as from: cars, caravans, motorbikes, scooters, boats etc.

Application: Clean the surface with e.g.

AUTOSOL® PLASTIC CLEANER. Apply a thin layer with a clean and soft cloth, and polish. In case of deep scratches, repeated use is recommended. Do not use on coated, printed or painted surfaces.

Productnr Product

495-1-0005 Autosol Acrylic Polish tube 75ml

ANODIZED ALUMINIUM POLISH

AUTOSOL® POLISH FOR ANODISED ALUMINIUM is a special polish containing the finest of polishing agents to achieve optimum cleaning results on all types of anodised aluminium. Developed and tested in collaboration with the LSL Motorradtechnik, Krefeld.

Application: Remove heavy dirt. Apply product to required parts to be cleaned, leave to take effect for a short while, rub with moist cloth then followed with a clean, soft cloth.

Note: Do not use on hot surfaces. Test material compatibility in an inconspicuous area.

Productnr Product

495-1-0004 Autosol Anodized Aluminium Polish tube 75ml

METAL CARE CONTINUES...

STAINLESS STEEL POWER CLEANER

AUTOSOL® Boat Stainless Steel Power Cleaner is made for stainless steel, chrome, brass, anodized and enameled metal surfaces, aluminum alloys, and nonferrous metals on boats and in the marine environment.

It is a powerful dirt remover, also removes greasy and oily residues. Neutral in color and odor.

Applications: Spray onto the dirty surface, allow to take effect for a short time and clean of thoroughly with a cloth. If necessary, use a sponge or brush to assist the cleaning process.

HAND WASH PASTE

AUTOSOL® HANDCLEANING

PASTE Thoroughly and gently clean your hands of all kinds of dirt, oil, grease and lubricants. Dermatologically tested. Biodegradable.

Use: Thoroughly rub in a small amount of hand cleaner together with some water, and wash your hands afterwards.

RUST-EX

AUTOSOL® RUST EX The combination of active chemical ingredients and manual polishing abrasives lead to an unique formulation designed to remove heavy corrosion and staining from most metals, restoring the shine and extending the life of your metal surface. Corrosion inhibitors prevent attack on non-corroded parts.

Economical and easy to use. Ideal for treating large areas of iron, bronze, copper, steel etc.

Application: Shake well. Rub into corroded area with clean cloth or sponge. Depending on the grade of corrosion allow product to act for an appropriate time (1 – 5 minutes). If necessary use hard sponge or brush to assist the cleaning process. Do not allow product to dry. Once surface is stain-free, wash off with water and dry.

Note: Test material compatibility on an inconspicuous area. Do not apply on hot surfaces.

SUPRA COPPER

OEM specified. For dealership warranty requirements, Supra Black ensures extended drivetrain warranty compliance. Fast-curing formula. Sensor-safe, low odor, noncorrosive. Meets performance specs of OE silicone gaskets. Retains high flexibility, oil resistant properties through use of a patented adhesion system. Temperature range -70°C to 260°C intermittent; resists auto and shop fluids and vibration.

NEW NEW

OEM specified. For high operating temperatures common in 4-cylinder, turbocharged or high-performance engines. The most advanced, high temp RTV silicone gasket available. Sensor-safe, low odor, noncorrosive. Superior adhesion. Three times more oil resistant than conventional silicones; eight times more flexible than cut gaskets. Temperature range -70°C to 350°C intermittent; resists auto and shop fluids and vibration.

THREADLOCKER MEDIUM STRENGTH

SUPRA GREY

NEW SUPRA BLACK

OEM specified. For high operating temperatures common in 4-cylinder, turbocharged or highperformance engines. The most advanced, high temp RTV silicone gasket available. Sensor-safe, low odor, noncorrosive. Superior adhesion. Three times more oil resistant than conventional silicones; eight times more flexible than cut gaskets. Temperature range -70°C to 350°C intermittent; resists auto and shop fluids and vibration.

Permatex’s Medium-Strength Threadlocker Blue is ideal for all nut and bolt applications 1/4 to 3/4 (6mm to 20mm). Threadlocker Blue eliminates need for stocking expensive lock nuts and lock washers and locks and seals while preventing parts loosening due to vibration. Protects threads from corrosion. Threadlocker BLUE is easily removable with hand tools for easy disassembly. The Gel formula provides “liquid-reliability” without drips, globs, mess or waste and is available in convenient dispensing systems: choose GEL TWIST® pin-point applicator or the GEL SQUEEZE® applicator. (Mil-S-46163A, Type II, Grade N).

FAST ORANGE

NEW NEW

The #1 selling, biodegradable, waterless, petroleum solvent-free hand cleaner that contains no harsh chemicals, petroleum solvents or ammonia that can sting cuts or abrasions. Pure, fresh-smelling natural citrus power does the cleaning. Fortified with aloe, lanolin, glycerin, and other skin conditioners to soothe raw, rough hands. Fine Pumice deep cleans the toughest dirt. Works great on laundry stains (smooth lotion only), scuff marks, tile floors, pet odors and many other household cleaning needs.

Productnr

440-706

Permatex threadlocker medium strength 10ml

GENERAL CLEANERS

The Power Wash seal is almost unlimited, but when mixed with water, it is so called a fresh product that retains its effect for about 2 months.

So mix only the amount you need at a time.

HYPER POWER Wash: Applications

Productnr

Windows, mirrors, glasses

Car windshield

Toilet, bath

Kitchen, faucets, stove, stainless steel, appliances

Bathroom, tiles, marble, raster, fiberglass

Oxidation stains, soap residue

Stains on clothes and textiles

Strength Manual

HYPER POWER WASH

HYPER POWER WASH is fully biodegradable and fits all waterproof surfaces, making it ideal for kitchens, cars, boats, hangars, anywhere! It breaks down and removes fat, not just spreading it, as well as other organic dirt. Very gentle on surfaces; free of solvents and aggressive chemicals!

• Based on plant-based tensides for effective and gentle cleansing.

• Does not contain harmful chemicals.

• For all kinds of cleaning and stain removal.

• Excellent for hand washing and machine cleaning.

• The product can be used on all surfaces that are water resistant.

• Can even be used on fabrics

• Makes the surface antistatic

Productnr Product

55-550-001 Hyper Power Wash 1L (sealant)

55-550-005 Hyper Power Wash 5L ((sealant)

5% Spray the lotion, wash with a sponge, dry with a spatula. You can increase the rinse aid.

10% Spray the lotion, wash with a sponge, dry with a spatula. You can increase the rinse aid.

5-10% Spray the lotion, rinse after 5 min or wipe with a damp towel.

5-10% Spray the lotion, wipe with a damp towel, Heavy stains: let it work first.

5-10% Spray the lotion, leave on for a couple of minutes or wipe with a towel.

10% Spray the lotion, rub in the stain, wait 20 min. Rinse. Repeat if necessary.

10% Spray the lotion onto the stain, wait 5 min. Rub the stain with a sponge or brush. Put the garment in the washing machine. Wash as directed.

Old stains on clothes and textiles 10% Spray the lotion onto the stain, wait 5 min. Rub the stain with a sponge or brush. Wrap the strain over the stain, rub the opposite. Let it work for a couple of hours. Put the garment in the washing machine. Wash as directed. If stains remain, repeat.

Stains on furniture and carpets

Old stains on furniture and carpets

Fireplaces, bricks, fireplaces, barbecues, etc.

Leather, imitation leather, plastic, sports shoes, leather shoes

10-20% Spray the lotion onto the stain, wait 5 min. Rub the stain with a sponge or brush. Wipe with a terry towel. If stains remain, repeat.

10-20% Spray the lotion on the stain, leave for one hour. Spray water, rub with a sponge and wipe with a terry towel

10-20% Spray the stain. Wash in slow circular movements using a sponge. Wipe with a dry towel.

10% Moisten the sponge or towel with the lotion, rub in a circular motion to allow the material to absorb the dirt. Wipe with a dry towel. NOTE! Lubricate with skinnfix.

Cars, motorcycles, bikes,camper vans, etc. 10-25% Wash with lotion, rinse. For dirty areas such as Engines, Rims, Insects - apply up to 20% and allow to work for 5 min. Wash thoroughly with slip and rinse.

Nitrile Gloves Black

9-1-12067-2

Disposable PE gloves

CONCENTRATED CLEANER

PROFLASH

ABNET Proflash effortlessly cleans all water-resistant surfaces and works by neutralizing the static bond that tightens, crosscontamination, contaminants, microbial growth, dirt and stains. The product is completely natural, easy to use and gentle. Ready-mixed -Just to spray on, let it work and rinse off.

• Suitable for boats, RV, cars, motorcycles and snowmobiles

• Cleans all surfaces

• Degreasing - removes greasy stains

• Renovating - the surface will be like new

• Antistatic - delays soiling

• Odor neutralizing - eliminates bad odor

• Less consumption of detergents and chemicals

• No environmental damage, toxins or damage to health during handling

• Developed with organic formula

• Biodegradable

496-11-750 ABNET PROFLASH 750ml 496-11-005 ABNET PROFLASH 5L

PROFESSIONAL

ABNET® Professional effortlessly cleans all surfaces and works by neutralizing the static bond that attracts dirt, grime and stains. The product is very suitable for cleaning hard surfaces but also on textiles and leather. For removal of contaminants, soot, algae, mold, oil, grease, ingrained dirt, runoff and other stubborn stains such as coffee, ink, grass, fruit, blood, nicotine, wine etc.

• Test winner!

• Suitable for boats, RV, cars, motorcycles and snowmobiles

• Cleans all surfaces

• Degreasing - removes greasy stains

• Renovating - the surface will be like new

• Antistatic - delays soiling

• Odor neutralizing - eliminates bad odor

• Less consumption of detergents and chemicals

• No environmental damage, toxins or damage to health during handling

• Developed with organic formulas

• Biodegradable

CONCENTRATED CLEANER CONTINUES...

SPRAYBOTTLE PRO 0,6L

Productnr Product

496-15-306 ABNET Spraybottle PRO 0,6L

DOUBLE ACTION SPRAY. 360°, 0.5

L

Productnr Product

496-15-365 ABNET Double action spray. 360°, 0.5 lit

POWER PRO+, FOAMSPRAYER, 360°

Ergonomic and robust pressure sprayer. Equipped with an air flow that means you do not have to open the bottle to empty it of pressure. 360 ° spray system spray with the bottle regardless of the angle, even upside down. Adjustable spray angle that gives off a fine spray and spray pattern.

• Unique nozzle forms foam on the impact surface which gives increased effect

• Can be used upside down without sucking air

• Adjustable spray angle to optimize spray pattern.

496-16-361

POWER PRO+ PRESSURE SPRAYER

A high-quality series of easy-touse and robust pressure sprayers with outstanding quality for the most demanding user. The pressure sprayer is equipped with a compressed air preassure gauge, safety valve, 35 cm long lance and a grip-friendly handle. Intended for work such as application of cleaning agents, disinfection, impregnation at boat yards, in car washes, mechanical workshops, the food and pharmaceutical industry and other industrial industries that require removal of dirt and chemical contaminants.

496-16-363

496-16-366

496-16-369

496-16-3612

CLEANERS

MOTORCYCLE CLEANER

High performance cleaner for dirty road motorbikes. Ideal for removing road dirt. It also removes oil stains and insects.

TIRES & PLASTIC SHINE

Ready-to-use specimen for maintenance and care of surfaces made of rubber and plastics. Protects against stains for a long time. It slows down the process of getting dirty again.

UNIVERSAL CLEANER

Specimen for the care of all surfaces. It works immediately - without using water. Thanks to its ingredients it masks minor scratches, strengthens the color, removes ongoing dirt, and stains after hard water.

POLISH & PROTECT

Specimen for easy and effective polishing and protection of elements of all types of motorcycles, bicycles, scooters, fairings. easy to use. does not leave greasy traces and light reflections. Leaves a hydrophobic coating, long-lasting shine effect

Microfiber Towel Lime

Ultra-delicate microfiber for waxing, sealants and quick detailers.

BIKE SHINE

A rinse aid and preservative. We get the full effect in one mode of operation, no polishing required, no special surface preparation. Provides gloss and a water-repellent coating.

BRAKE CLEANER

Perfectly degreases surfaces. Removes all deposits from asphalt and tar. Eliminates squeaking of brake shoes, does not leave any traces, removes brake fluid, oil and grease.

CHAIN CLEANER

Removes all deposits from asphalt and tar, dust formed as a result of abrasion of blocks and baked dirt.

CHAIN LUBE

For chains and other motorcycle parts. Specially designed for motorcycles. Takes specific requirements for the lubrication of chains and other moving parts of a motorcycle, such as rotational and sliding speed into account.

EXHAUST CLEANER

High advanced product based on nanotechnology. Immediately cleans and reduces corrosion, dirt. Brings back the gleaming luster look.

CLEANERS

PRIMESHINE CHAIN CLEANER

Perfect for removing grease and oil, PrimeShine Chain Cleaner leaves your chain looking new again while protecting against contaminants and corrosion.

Productnr Product

440-230

PrimeShine Chain Cleaner (500ml)

MEGA TOOL BUNDLE

The pinnacle bundle combination for precision chain tension and wheel alignment. Load your Chain Monkey onto the chain and set to the setting required for your motorcycle. Clamp your Laser Monkey onto the sprocket and point the laser as far down the chain as possible. Adjust your chain until the laser is showing in the centre of the chain while the slack has just been removed from the chain… and you’re done! The ultimate tool bundle to maximize the output and performance of your motorcycle.

MEGA TOOL BUNDLE INCLUDES:

• • 1 x Motorcycle Chain Monkey

• • 1 x Motorcycle Laser Monkey

Productnr Product

440-310 Mega Tool Bundle

PRIMESHINE CARB & INJECTOR CLEANER

PrimePrimeShine Carb Cleaner has been perfectly designed to penetrate all parts of the carburetor or injector to quickly and efficiently remove grime and contaminants.

Productnr Product

440-260

PrimeShine Carb and Injector Cleaner (500ml)

PRIMESHINE BODYWORK FOAM CLEANER

PrimeShine Bodywork Foam Cleaner has been developed by Tru-Tension for quick and easy cleaning, leaving a polished shimmering shine. Our all in one instant action foam cleaner soaks into the dirt, lifting it away, and with added polish it’s a one-step deep cleaner. Perfect for cleaning indoors, on the road, at shows and without the need for water. For use on all bodywork and painted/ plastic surfaces it’s a perfect all round cleaner.

Productnr Product

440-220

PrimeShine Bodywork Foam Cleaner (500ml)

COOLANT

MOTORCYCLE

Perfect for use in almost every vehicle over all types of terrain. Engine Ice is easy to use in the convenient 1/2 gallon bottle. Premixed to save you time, choose Engine Ice when you make your next coolant change.

• Superior heat reduction vs competition*

• Boil-over protection to 125c

• Freeze protection to -22c

• Superior corrosion protection**

• New oat technology

• Ready to use

* Independently lab-tested against leading competitive products.

** Compared to straight water without additives

KEEP

YOUR COOL NO MATTER HOW HOT THE COMPETITION OR HOW TREACHEROUS THE TERRAIN BECOMES!

SXS/ATV

Designed to meet the specific needs of the SXS & UTV machines, Engine Ice Hi-Performance SXS/ATV Coolant + Antifreeze is specially formulated to improve the performance of the highperformance SXS by providing excellent heat dispersion and maintaining optimum operating temperature. It provides superior corrosion protection when compared to water. Pre-mixed to save you time, choose Engine Ice when you make your next coolant change.

• Superior heat reduction vs competition*

• Boil-over protection to 125c

• Freeze protection to -33c

• Superior corrosion protection**

• New oat technology

• Ready to use

* Independently lab tested against leading competitive products.

** Compared to straight water without additives.

SNOWMOBILE & WINTER

When old man winter comes calling, you need extreme protection from freezing as well as the heat dissipation of a premium coolant. Engine Ice Hi-Performance Snowmobile & Winter Coolant and Antifreeze gives you the best of both worlds. Perfect for snowmobiles, snow bikes, UTVs, or anywhere you need extra low-temperature protection. And it still offers the excellent heat dispersion properties that Engine Ice has always provided. Engine Ice is easy to use in the convenient 1/2 gallon bottle. Pre-mixed to save you time, choose Engine Ice when you make your next coolant change.

• Superior heat reduction vs competition*

• Boil-over protection to 260f (127c)

• Freeze protection to -45f (-43c)

• Superior corrosion protection**

• New oat technology

• Ready to use

* Independently lab-tested against leading competitive products.

** Compared to straight water without additives.

FRONT FORK OIL 01M

KYB 01M FORK OIL is specifically designed to be only used in suspension with the highest demands for optimal performance. KYB oil is recognised by OEM manufacturers all over the world to be oil of the highest quality and therefore the go-to oil for them.

• Reduces the friction coefficient substantially

• Increases seal life exponentially

• A high temperature stability

• Excellent anti-friction properties

• Optimal ageing resistance

• Reduction of excessive foaming

Fork KYB Oil 01M 1L

Front Fork KYB Oil 01M 5L 55-080-020

Front Fork KYB Oil 01M 20L

SHOCK RCU OIL K2C

KYB K2C SHOCK OIL is specifically designed to be only used in shock absorbers with the highest demands for optimal performance. KYB oil is recognised by OEM manufacturers all over the world to be oil of the highest quality and therefore the go-to oil for them.

• A super stable viscosity

• Excellent anti-friction properties

• Optimal ageing resistance

• Reduction of excessive foaming

SUPENSION OIL

972-025-06-004

972-025-06-005 R2 High Performance Suspension Fluid [3785ml]

SNOWMOBILE 2-STROKE OIL & GRIP GLUE

SNO-X: 2T Snowmobile Oil Semi-Synthetic

Partially synthetic two-stroke oil that has been specifically developed for winter use and for use in snowmobiles. Suitable for all water-cooled and air-cooled two-stroke engines. It is suitable for both injected and pre mixed lubrication 2-stroke engines. It also works for engines equipped with exhaust valves. JASO FC, ISO EGD, API TC++

Productnr Product

55-000-001 Sno-X 2T Snowmobile Oil Semi-Synthetic 1L

55-000-004 Sno-X 2T Snowmobile Oil Semi-Synthetic 4L

55-000-020 Sno-Attack 2T Snowmobile Oil Semi-Synthetic 20L

ARIETE:

Super Fast Grip Glue 20g

Grip glue from Ariete!

• Dries in 30 to 90 seconds

• High viscosity

• Packaging of 20 gr

• Read and follow description instructions carefully

Ariete Super Fast Grip Glue 20g

RENTHAL: Super Fast Grip Glue 20g

A highly developed grip glue, specially formulated to give a secure bond without damaging the grip.

FILTER CARE

THE TWIN AIR SYSTEM

Keep your air filter clean, and you'll keep your engine running at top power and running longer. The System is the solution everything you need in a sturdy storage box with carrying handles, including the Twin Air Cleaning Tub, Oiling Tub, Dirt Remover and Liquid Power Filter Oil, plus Twin Air Contact Cleaner and gloves.

CLEANING TUB

This resealable tub comes with a filter tray that allows dirt to sink to the bottom, away from your filter, and a second tray to keep your filter submerged.

OILING TUB

Submerge your clean filter in the tub, squeezing the foam until it is saturated. Then remove filter and squeeze excess oil back into the tub – ideal for oiling multiple filters. Then return oil to the original container for long term storage.

FILTER CARE CONTINUES...

LIQUID POWER

The original formula that set the standard of excellence in foam air filter oils. Many filter oils have a tendency to drain to one side, leaving part of your filter unprotected. Blue ORIGINAL Liquid Power starts thin for deep penetration, then dries evenly to microcoat the foam cell walls with a shield that repels dirt while accelerating airflow.

LIQUID BIO POWER

Like the Original Formula, green BIO Liquid Power microcoats the foam cell walls to prevent dirt, dust, mud and even water from entering your carburetor. Boost your bike’s performance with the first biodegradable air filter oil that works in all riding conditions, with the added convenience of wash-down-the-drain cleaning.

LIQUID DIRT REMOVER

Formulated to quickly cut through ORIGINAL Liquid Power, loosen the dirt and flush your filter clean. Will not harden or damage filter foam like solvents and gasoline do.

BIO DIRT REMOVER

Clean your BIO Liquid Power-oiled filter with BIO Dirt Remover. Mixed with hot water, the granular cleaner quickly cuts through the filter oil. Hand-wash your filter in a bucket or sink – this water-soluble cleaner can go right down the drain without clogging or harming the environment.

FILTER CARE CONTINUES...

BIOPAK

If you’re a fan of the groundbreaking BIO Formula, we’ve saddled up Liquid Power and Dirt Remover in handy, handled packs for your go-anywhere convenience.

LIQUID POWER + LIQUID DIRT REMOVER - SPRAY PAK

We’ve saddled up Liquid Power and Dirt Remover in handy, handled packs for your go-anywhere convenience.

201-15-9007

Air Liquid Power Spray + Liquid Dirt Remover Spray Pak (2x500ml) (12) (IMO)

CONTACT CLEANER SPRAY

Clean your airbox, cage and more with this fast drying formula that leaves no residue. Safe for plastic and painted surfaces.

BIO SEALANT

If you’re planning to ride in very extreme conditions, a bead of BIO Air Filter Sealant can provide that extra line of defense. It’s airtight, waterproof, dustproof and gritproof, and unlike grease, it will not dissolve under high heat or solidify in extreme cold.

ICEFLOW COOLANT

This ready-to-use coolant provides long lasting protection of all metals inside today’s liquid-cooled systems, without harming the water pump seals. It reduces and maintains the operating temperature to prevent overheating, offers the added assurance of an extreme freezing point (-26ºC / -14.8ºF) and boosts reliability. The coolant of choice for extreme off-road conditions as well as onroad usage year-round, in all climates. IceFlow is Mono Propylene Glycol-based, silicate-free and formulated with demineralized water – non-toxic, biodegradable and eco-friendly.

WORKSHOP & MAINTENANCE

STARTKIT FILTER OIL + DETERGENT

The Classic Starter Pack. The No-Toil Classic 3-pack gives you everything you need to perfectly maintain a filter. No-Toil Classic Biodegradable Filter Oil gives you the best protection, while No-Toil Biodegradable Cleaner makes cleaning your dirty a filter a breeze without solvents, and No-Toil Biodegradable Rim Grease ensures an air-tight seal of your filter on your air box.

CLASSIC Filter oil

No-Toil Air Filter Oil is the only 100% Biodegradable air filter oil on the market. Offer superior protection and combined with No-Toil Biodegradable Air Filter Cleaner makes the safest and easiest way to maintain your air filter

RIM GREASE

Designed to keep your air filter sealed tight against the air box to ensure that no dirt sneaks into your engine by the seal.

FILTER CLEANER

No-Toil Filter Cleaner is a concentrated formula designed to mix with water, no solvents are required to clean No-Toil treated filters! No-Toil Biodegradable Air Filter products are the fast, convenient way to maintain your air filters.

SERVICE PRODUCTS

OIL SPRAY

K&N Air Filter Oil is the only oil specially formulated to work in combination with the cotton fabric in K&N air filter elements providing a superior air filtration system. When used as directed, it quickly penetrates the filter pleats, where it remains suspended in the cotton fabric. Saturation is maintained until the element is cleaned with K&N Air Filter Cleaner.

NEW AEROSOL 7.18

K&N Air Filter Oil is the only oil specially formulated to work in combination with the cotton fabric in K&N air filter elements providing a superior air filtration system. When used as directed, it quickly penetrates the filter pleats, where it remains suspended in the cotton fabric. Saturation is maintained until the element is cleaned with K&N Air Filter Cleaner.

SERVICE KIT SPRAY

K&N Recharger Kit is designed for cleaning your K&N oiled cotton air filter when it is time to be serviced. The kit comes with K&N Power Kleen air filter cleaner and air filter oil. Will restore air flow efficiency and will bring your K&N oiled cotton air filter to like new condition. K&N Power Kleen works to dissolve the dirt build up and old filter oil, and can be washed away with water. After the air filter fully dries re-oil your air filter then reinstall it. This Recharger Kit comes with a 204 milliliter aerosol spray can of oil and a 355 milliliter K&N pump bottle of Power Kleen air filter cleaner.

AEROSOL 14.36

OIL

When used as directed, it quickly penetrates the filter pleats, where it remains suspended in the cotton fabric. Saturation is maintained until the element is cleaned with K&N Air Filter Cleaner.

FILTER CLEANER

NEW

K&N Air Filter Oil is the only oil specially formulated to work in combination with the cotton fabric in K&N air filter elements providing a superior air filtration system. When used as directed, it quickly penetrates the filter pleats, where it remains suspended in the cotton fabric. Saturation is maintained until the element is cleaned with K&N Air Filter Cleaner.

NEW

K&N Air Filter Cleaner is the only cleaner recommended to clean K&N cotton air filter elements. K&N Power Kleen works to dissolve the dirt build up and old filter oil, then it can be washed away with water. The use of any other cleaning solution can void your air filter's warranty. It is so good at cleaning greasy dirt and grime that it can also be used as an industrial strength degreaser by removing deposits from most surfaces including cotton air filters, painted surfaces, chrome, plastic and more!

SERVICE PRODUCTS CONTINUES...

K&N Power Kleen is the only cleaner recommended to clean K&N cotton air filter elements. K&N Power Kleen works to dissolve the dirt build up and old filter oil, then it can be washed away with water. The use of any other cleaning solution can void the filter's warranty. It is so good at cleaning greasy dirt and grime that it can also be used as an industrial strength degreaser by removing deposits from most surfaces including cotton air filters, painted surfaces, chrome, plastic and more!

NEW NEW FILTER CLEANER

K&N Power Kleen, Filter Cleaner, 32 Oz Trigger Sprayer

FILTER CLEANER, 5 Gallon

K&N air filter cleaner is the only cleaner recommended to clean K&N cotton air filter elements. It will bring your K&N oiled cotton air filter to like new condition. K&N Power Kleen works to dissolve the dirt build up and old filter oil, then it can be washed away with water. The use of any other cleaning solution can void the filter's warranty. It is so good at cleaning greasy dirt and grime that it can also be used as an industrial strength degreaser by removing deposits from most surfaces including cotton air filters, painted surfaces, chrome, plastic and more!

AIR FILTER CLEANER

It works to dissolve the dirt build up and old filter oil, then it can be washed away with water. The use of any other cleaning solution can void the filter's warranty. It is so good at cleaning greasy dirt and grime that it can also be used as an industrial strength degreaser by removing deposits from most surfaces including cotton air filters, painted surfaces, chrome, plastic and more!

20-99-0640 K&N Power Kleen, Filter Cleaner, 5 Gallon

SERVICE KIT

• Maintenance system for all K&N Filtercharger air filters

• Restores air flow efficiency

• Includes air filter cleaner and air filter oil

• The air filter cleaner comes in a pump bottle and the oil comes in a squeeze bottle

SERVICE PRODUCTS CONTINUES...

RECHARGER KIT, SQUEEZE OIL

K&N Power Kleen works to dissolve the dirt build up and old filter oil, then it can be washed away with water. After the air filter fully dries re-oil your air filter then reinstall it. This Recharger Kit comes with an 8 ounce squeeze bottle of oil and a 12 ounce K&N pump bottle of Power Kleen air filter cleaner.

RECHARGER KIT, SQUEEZE OIL

K&N Sealing Grease provides an airtight fit around sealing surfaces on all types of air filter elements. It resists heat and will not melt or run off. K&N Sealing Grease is designed to maintain a seal in severe conditions. It is not to be used on clamp-on filter elements.

NEW NEW

RECHARGER KIT, AEROSOL OIL

Will restore air flow efficiency and will bring your K&N oiled cotton air filter to like new condition. K&N Power Kleen works to dissolve the dirt build up and old filter oil, then it can be washed away with water. After the air filter fully dries re-oil your air filter then reinstall it. This Recharger Kit comes with a 204 milliliter aerosol spray can of oil and a 355 milliliter K&N pump bottle of Power Kleen air filter cleaner.

CANS & CONTAINERS

OIL MIXER

Small accessories are often the most useful. Now you can prepare your oil/fuel mix with the help of Polisport Oil Mixer Bottle. It comes with a scale to help you prepare the mix, the mixer is available in two different capacities, 250 ml / 8.5 oz and 125 ml / 4.22 oz.

Productnr Product

179-8152500001 250 ml

179-8152600001 125 ml

OIL BEAKERS

Plastic oil beakers to make the maintenance of your motorbike. They come in different sizes with the same durable and resistant plastic compound.

Productnr Product

179-8453300001 1000 ml / 0.26 gal.

179-8453300002 500 ml / 0.13 gal.

179-8453300003 250 ml / 0.06 gal.

179-8453300004 100 ml / 0.026 gal.

TMV OIL MEASURE CAN

Productnr Product

391-174X050 TMV Oil Measure Can 1Ltr (with Cap)

391-174X060 TMV Oil Measure Can 3Ltr (with Cap)

391-174X070 TMV Oil Measure Can 5Ltr (with Cap)

391-174X080 TMV Oil Measure Can Flexible Spout-Length 18.5cm - Dia 2.6cm

MEASURE CONTAINER

Productnr Product

9-1-12149 Measure container 600ml

TMV OIL MEASURE BOTTLE

Productnr Product

391-174X036 TMV Oil Measure Bottle 1000cc

391-174X044 TMV Oil Measure Bottle 100cc (With Cap)

391-174X045 TMV Oil Measure Bottle 250cc

391-174X035 TMV Oil Measure Bottle 500cc

TMV OIL DRAIN CONTAINER

Productnr Product

391-177800 TMV Oil Drain Container 10L

FILLING CAN / PITCHER

FILLING CAN

Filling can 1L has a red color and it is manufactured in Finland. Excellent in filling the oil in small engines such as lawn mower. Made in Lohja. 13,5x24,5x19 cm. Made from recycled plastic.

HOMOLOGATED JERRY CAN

Homologated Jerry can 2.5 ltr suitable for the transportation of fuel, water or oil.

Dimensions: 170x235x95mm

FILLING CAN WITH NOZZLE

Filling can 1L has a red color and it is manufactured in Finland. Excellent in filling the oil in small engines such as lawn mower. Made in Finland. 13,5x24,5x19 cm. Made from recycled plastic.

Productnr Product

137-675014 Plastex Filling can 3L Grey Eco with Nozzle

PITCHER W SCALE

Natural color measuring jug with graduated scale is made of polypropylene. Measuring jug has a capacity of 2 liters, and its scale is dl. Measuring jug can withstand prolonged use of -20 to + 100 ° C. Measuring jug is resistant to solvents and other chemicals. Does not drip! And it is very accurate to pour. Large handle makes the jar can easily be handled even while wearing gloves. Made in Finland.

10 L, Ripper cap

Productnr

981-2010-02 10L Red, Ripper cap

981-2010-03 10L Green, Ripper cap

981-2010-04 10L Blue, Ripper cap

981-2010-06 10L Orange, Ripper cap

981-2010-10 10L White, Ripper cap

Tuff Jug Parts

981-3000

981-3001

981-3002

981-3003

981-3004 Fast Filler hose with tap

981-3005 Standard cap

981-3006 Red Ripper cap

981-3007-0 Cork for vent black 2pcs

981-3007-10 Cork for vent white 2pcs

20 L, Ripper cap

20 L, Standard cap

10 L, Standard cap

PROOCTANE

FEATURES

• Certified as a portable fuel container for Europe

• Complies with ADR standards

• Highly durable and leak-proof cap and walls

• Includes Transportation Cap and Hose or Quick Fill Spout

• Ergonomically designed handle for transport

• Two handle design to help the filling process

• Reinforced ribbed bottom

• Oil/Fuel Mixer Included and attached to the Fuel Jug

• Free area to customize with name and/or number

• Oil/Fuel mix gauge on the cap to identify the fuel mix

• Non-slip bottom

AUTO SHUT-OFF IN BOTH FILLING SYSTEMS in order to prevent fuel spilling

Spare Parts & Accessories Productnr

179-8152800001 Polisport Quick Fill Spout

179-8152700001 Polisport Fill Hose + Bender + cap for ProOctane

179-8152900001 Polisport Can Cap

179-8152700002 Polisport Fill Hose + Bender for ProOctane

179-8152500001 Polisport ProOctane Mixer 250 ml with scale

179-8152600001 Polisport ProOctane Mixer 125 ml with scale

179-8155200001 Polisport o-rengassarja ProOctane kanisteriin

TECH DIVISION SINCE 1983 DAMN GOOD FUN