ALL SECURITY FILM FROM EXISTING GLAZING REMOVE ALL EXISTING ALARM SYSTEM AND ALL RELATED COMPONENTS
DEMOLISH EXISTING BASEBOARD HEATERS
SALVAGE EXISTING ALARM SYSTEM AND ALL RELATED COMPONENTS FOR RELOCATION
RELOCATE EXISTING ELECTRICAL PANEL REMOVE EXISTING PLUMBING FIXTURE & ASSOCIATED PLUMBING
CONSTRUCTION GENERAL NOTES:
1. REMOVE ALL EXISTING FLOOR AND RUBBER BASE
2. REMOVE ALL EXISTING LIGHT FIXTURES 3. REMOVE ALL DOORS & FRAMES
4. DEMOLISH ALL EXISTING ACOUSTIC CEILNG & BULKHEAD
5. PATCH AND REPAIR ALL SURFACES AFFECTED BY DEMOLITION FOR NEW FINISH
6. REMOVE ALL EXISTING WINDOW COVERINGS AND WOOD VALENCE
7. MAINTAIN ALL EXISTING SPRINKLER HEAD LOCATIONS
CONSTRUCTION KEY NOTES:
CONSTRUCTION GENERAL NOTES: EXISTING WALL
PROVIDE
PROVIDE BLOCKING FOR WALL MOUNTED EQUIPMENT. SITE VERIFY LOCATION WITH
- KEYPAD
INTERIOR PARTITION LEGEND:
1. ALL MEASUREMENTS FROM FINISHED FACE TO FINISHED FACE (TYPICAL)
2. CONTRACTOR TO VERIFY ALL CRITICAL DIMENSIONS
3. ALL TRADES TO VERIFY DIMENSIONS & DATA HEREIN WITH EXISTING CONDITIONS ONSITE. ANY ERRORS OR OMISSIONS TO BE REPORTED IMMEDIATELY TO DESIGNER
4. GENERAL CONTRACTOR TO COORDINATE ALL SCHEDULING AND PHASING OF WORK WITH OWNER TO ENSURE MINIMAL DISRUPTION TO FACILITY OPERATIONS
5. WALLS TO BE SANDED SMOOTH FOR PAINT FINISH UNLESS OTHERWISE INDICATED
6. ALL FURNITURE & EQUIPMENT TO BE SUPPLIED BY OWNER AND CONTRACTOR INSTALLED
7. RECONFIGURE AND BALANCE MECHANICAL SYSTEM TO SUIT NEW CONSTRUCTION
8. CONTRACTOR TO SUBMIT APPLICATION AND OBTAIN ALL NECESSARY BUILDING PERMITS
DRAWER RUBBISH AND RECYCLING BIN
ALUMINUM CEILING SLATS
ALUMINUM SHELF FRAMING
FIXED SHELVES 2" WOOD VENEER
SECURE TO BLOCKING BEYOND FINISHED DRYWALL FULL HEIGHT BACKSPLASH
1" QUARTZ COUNTERTOP
FILLER CABINET
CABINET DRAWER W/ ACCURIDE (OR EQUAL) GLIDES
CABINET DOORS AT 3/4" PL-1 AND KICKBASE
RECESSED COVE LIGHTING
HM-1 2" ALUMINUM CEILING SLATS TO RUN FROM WALL FACE TO WALL FACE (TYPICAL) WD-1 2" WALL PANEL 2" BUTTON TYPICAL C/W
TELEVISION FEATURE WALL 1
FINISH SCHEDULE
ABBREVIATIONS