Approved Wind Farm Construction Traffic Managment Plan

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

Turitea Wind Farm Construction Traffic Management Plan T90-VAWT-PM-PL-0018

Document Preparation

Signature

Marc Gouvernel – Project Engineer (Downer NZ) Document Review

Signature

Marty Craill – Project Manager (Downer NZ) Document Review

Signature

Duncan Wallbank – Project Manager (Vestas) Document Approval

Signature

Richard Galloway - CPEng 220228 (Downer NZ)

Project Document Revision

Date

05

26/09/19

Page 1

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

Document Version History Version Date No.

Document Status

Brief Description of Change(s) from Previous Version

00

18/06/2019

Draft

Issued for internal review

01

19/06/2019

Draft

Issued for internal review

02

20/06/2019

Draft

Issued for client review

03

21/06/2019

Issued

Issued for client approval

04

03/09/2019

Issued

Issued to address Council review comments

05

26/09/2019

Issued

Issued to address Council review comments

Page 2

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

Vestas Contact Numbers Name

Position

Phone

Email

Duncan Wallbank

Project Manager

+64 27 885 5407

duwla@vestas.com

Alan Simpson

Assistant Project Manager

+64 27 885 5408

alsin@vestas.com

Moran Stark

Site Construction Manager

+64 27 885 5402

mopst@vestas.com

Stuart Oakey

QSE Professional

+64 27 885 5401

sajoa@vestas.com

Downer Contact Numbers Name

Position

Phone

Email

Marty Craill

Project Manager

027 406 7886

Marty.Craill@downer.co.nz

Marc Gouvernel

Project Engineer

021 831 678  

Steve Christensen

HSE Professional

027 291 1539

Richard Galloway

CPEng

021 241 6911

Marc.Gouvernel@downer.co.nz

Steve.Christensen@downer.co.nz

Richard.Galloway@downer.co.nz

Page 3

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

Contents 1

Introduction 1.1 Purpose and objectives of the CTMP 1.2 Review and updates to the CTMP 1.3 Related Documents 1.4 CTMP - Resource Consent Conditions 1.5 References

6 7 8 9 10 13

2

Project Details

14

3

Construction staging and sequencing 3.1 Works Programme 3.2 Working Hours

15 15 17

4

Roading upgrades 4.1 South Range Rd – Pahiatua-Aokautere Rd 4.1.1 Existing Intersection 4.2 Pahiatua-Aokautere Road Eastern site access 4.3 Necessary road improvement for over-dimension loads (ODLs) 4.3.1 South Range Road (SRR) 4.3.2 Improvements to the public road network

18 18 19 20 21 21 22

5

Pavement Maintenance 5.1 South Range Road

23 23

6

Construction activities that may generate traffic effects

25

7

Construction Traffic Management 7.1 Philosophy 7.2 Roles and responsibilities 7.3 Management procedures 7.3.1 Site Staff 29 7.3.2 Personal Protective Equipment (PPE) 7.4 Construction and Temporary Traffic Planning 7.4.1 Construction Pack Planning 7.4.2 Traffic Management Plan 7.5 Implementation

27 27 28 29

Mitigation measures 8.1 Site Access Controls 8.1.1 New intersection of South Range Rd and Pahiatua-Aokautere Road 8.1.2 Pahiatua-Aokautere Road Eastern site access 8.1.3 Greens Road Access 8.2 Construction Traffic Movements 8.2.1 Traffic Volumes

32 32 32 32 32 33 34

8

29 30 30 30 31

Page 4

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

9

Monitoring 9.1 Traffic 9.2 Driver Comments

36 36 38

10 Training 10.1 Project Induction

39 40

11 Reporting

41

12 Review

42

13 Consultation & Communications

43

List of Appendices Appendix A - Proposed Construction Access Drawing Appendix B - Proposed Eastern Access Drawing Appendix C - WTG Components Transport Feasibility Study Appendix D – TMP: Pahiatua-Aokautere Road Widening

44 44 44 44 44

Page 5

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

1

Introduction

This Construction Traffic Management Plan (CTMP) has been prepared in compliance with the Resource Consents for the Turitea Wind Farm project. The wind farm is located near the city of Palmerston North in the region of Manawatu – Whanganui, New Zealand.

The plan incorporates information from the appointed Engineering, Procurement and Construction (EPC) Contractor for the project (Vestas-New Zealand Wind Technology Ltd) and also the project’s Balance of Plant (BoP) Contractor (Downer New Zealand).

Mercury NZ Ltd (the Employer) have Consent for 60 Wind Turbine Generators (WTG’s), a 220/33kV substation and a 22kV transmission line of approximately 15km in length connecting the wind-farm substation to the existing Linton substation.

The first phase of the project involves construction of the northern portion of the consented wind farm (the Northern Turbine Zone). This includes 33 WTGs, each of 3.6MW, at the northern end of the site connected to the substation and transmission lines.

The second phase of the project (the Southern Turbine Zone), includes an additional 27 WTGs, with the substation connection being considered at a later date. This second phase of the project will be subject to a new or substantially revised CTMP. Of particular note, is that neither the WTG’s nor the substation in the Northern Turbine Zone require any access from Greens Road. This CTMP therefore only addresses access off Pahaitua-Aokautere Road, that is South Range Road (SRR) and the Eastern Access.

Construction of the Northern Turbine Zone will require the existing South Range Road (SRR), which is a public road in part, to be both re-aligned and improved.

Additionally, the existing SRR entrance off Pahaitua-Aokautere Road will be relocated to provide a new upgraded entry point further south away from the tight bend.

The intention of the eastern access is that it shall be utilised for the turbine blade deliveries only. During construction works, the access will be barricaded closed to mitigate unauthorised access.

Page 6

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

1.1

Purpose and objectives of the CTMP

The CTMP has been prepared to manage, mitigate and monitor the effects of construction traffic on the local road network during the construction of the Turitea Wind Farm (Northern Turbine Zone).

The objective of the CTMP is to detail the best practicable option to avoid adverse safety and efficiency effects caused by construction and to mitigate any such effects should they occur.

The CTMP identifies how construction traffic will be managed to: • Protect public safety; • Minimise delays to road users; and • Inform the public about any potential impacts on the road network.

The CTMP includes detail on the following: • Construction activities that might create road safety and/or efficiency effects; • Management procedures and mitigation methods; • Roles and responsibilities; • Training of staff in relation to traffic management; • Monitoring methods; and • Methods for managing complaints and keeping compliance records All Contractors and Sub-Contractors engaged on the project shall be required to conform to the requirements of this CTMP.

Page 7

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

1.2

Review and updates to the CTMP

This CTMP is a live document that will be reviewed and updated during the course of the project to reflect significant changes associated with construction techniques, communication, mitigation or the natural environment. A review process is described in Section 12 of this plan.

The CTMP is considered a core document and will be accompanied by location specific TMP’s as the project progresses.

A schedule of anticipated TMP’s is outlined, but not limited to, the items below: TMP Description

Design Criteria/Control

Pahiatua Aokautere Road widening • •

Stop/Go with single traffic flow Shoulder closure / unmanned site

South Range Road

•

CAR R614855 refer to Appendix D

•

Stop & go controlled points located either end of existing track being used by heavy construction plant TC’s with radio communication with plant operators

• •

Pahiatua Aokautere Road rolling blocks

• • • • • • •

• South Range Rd (new entrance) • • • • •

Plant transporters and truck & trailer units prior to the opening of the South Range Road entrance Heavy construction traffic entering site i.e. large concrete precast deliveries Road maintenance i.e. pothole repairs Assist road user breakdowns Road inspections Road sweeping Heavy construction traffic entering site shall be minimised/coordinated outside of peak hours Geographical, topographical constraints while entering/exiting site require speed restrictions and early warning indicators of construction vehicles Increase in traffic volume created by nearby construction projects – requires weekly construction traffic coordination strategy to minimise road congestion and ensure transport movement efficiencies Construction of shoulder widening creating a right turn bay and approach taper Early warning signs of turning movement and site entrance VMS boards notifying road users of initial road changes Signed designated indicating last passing bay Radio communication between site gateman and truck drivers

Page 8

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

TMP Description

Design Criteria/Control

Pahiatua Aokautere Road eastern access

• • •

Restrictive access for private and construction traffic Implement barricades/closed gate and road closure notification sign

•

Implement clear communication protocols with road users and construction plant Controlled access into site Constant site changes and interface locations with road users Road user and construction plant safe and efficient thoroughfare along SRR

Area 1 Construction interface with South Range Rd

• • •

• Area 4 Construction interface with South Range Rd

1.3

• • •

Implement clear communication protocols with road users and construction plant Controlled access into site Constant site changes and interface locations with road users Road user and construction plant safe and efficient thoroughfare along SRR

Related Documents

This CTMP should be read in conjunction with the following related documentation: • •

Turitea Wind Farm Transport Feasibility Study (Tranzcarr Heavy Haulage Ltd, July 2018) Transportation Assessment Report (Traffic Design Group Ltd, August 2008)

Page 9

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

1.4

CTMP - Resource Consent Conditions

The Resource Consent conditions relating to this CTMP are contained within the following schedule: •

Schedule 3: Conditions relevant to Palmerston North City Council and Tararua District Council.

•

The Land Use Consent references for both councils are noted below. o PNCC Land Use Consent - RC0068 o TDC Land Use Consent – 1448

Conditions relating to this CTMP are detailed in the table below.

Condition

70

70.1

Details At least 40 working days prior to any construction works commencing the Consent Holder shall submit a CTMP to the Roading Manager of the respective Councils, for review in a technical certification capacity. A response should be provided within 15 working days of receipt. Construction activities must not commence until written certification has been obtained. The purpose of the CTMP shall be to set out in detail matters relating to the extent and timing of construction traffic activity, and the traffic management provisions to be put in place during this time to achieve a safe and efficient road network. The CTMP shall be prepared by a Chartered Professional Engineer following community consultation and shall cover at least the following matters: Documentation of who has been consulted and involved in preparing the CTMP, which shall include the: - CLG (Community Liaison Group); - residents on South Range Road, Greens Road, and Kahuterawa Road; - groups representing users of Hardings Park such as the Manawatu Mountain Biking Club; and - traffic engineers from Tararua District and Palmerston North City Councils

70.2

Project scheduling

70.3

Travel routes

70.4

Access details

70.5

Roading upgrades, including those referred to in conditions 53-55 Condition 53 The Consent Holder shall, at its own cost, undertake improvements to the southern access route to the site before any use of the Greens Road site access by construction traffic. This does not preclude use of the Greens Road access for investigation and design, to undertake the necessary roading improvements, or as an adjunct to the roading upgrades (such as for spoil disposal or vehicle storage). The improvements to be undertaken are: 53.1 - Benching to improve sight distance on Kahuterawa Road at a location 2.9km south of SH57, in general accordance with Traffic Design Group drawing 8488-3Wl Sheet 13.

53.2 - Widening, benching and pavement upgrades to provide safe two-way movement on Greens Road, in general accordance with Beca drawing 0848RK222 Revision C.

CTMP Ref.

-

Section 13

Section 3 Section 4 Appendices Section 8.1.1 Section 8.1.2

Condition relates to the Southern Turbine Zone, therefore no details included in this CTMP

Page 10

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

53.3 - Seal extensions to provide a continuous sealed surface on Greens Road between Kahuterawa Road and the site access, with provision to ensure the design and construction provide an appropriate surface with respect to tyre noise.

Condition 54 The Consent Holder shall, at its own cost, develop a new intersection of South Range Road and Pahiatua-Aokautere Road before any use of South Range Road by construction traffic. This does not preclude use of the existing intersection for investigation and design, or as an adjunct to the reading upgrades (such as for spoil disposal or vehicle storage). The development of the intersection is to include:

54.1 - An intersection layout for the duration of construction to the standard of the NZTA Planning Policy Manual (SP/M/001 August 2007) Diagram D layout, in general accordance with either Traffic Design Group drawing 8488-3Wl Sheet 7, Revision B, or Traffic Design Group drawing 8488-3Wl Sheet 8, Revision A.

Section 4.1 Section 4.1.1

54.2 - A new length of road connecting the new intersection with the existing alignment of South Range Road, to be vested to Palmerston North City Council.

54.3 - Physically closing the existing intersection once the new intersection and alignment of South Range Road is constructed, but prior to commencement of wind farm construction, subject to necessary approvals from Palmerston North City Council and Tararua District Council.

Condition 55 The Consent Holder shall, at its own cost, undertake improvements to Pahiatua Aokautere Road in the vicinity of the eastern site access in general accordance with Traffic Design Group drawing 8488-3Wl Sheet 9, Revision A‌‌or to an alternative standard approved by Tararua District Council, before any use of the eastern site access by construction traffic. This does not preclude use of the eastern Pahiatua-Aokautere Road access for investigation and design, or as an adjunct to the roading upgrades (such as for spoil disposal or vehicle storage).If the Consent Holder elects not to use this access for construction or operation of the wind farm, the Consent Holder is not required to undertake the improvements.

70.6

70.7 70.8

Traffic flows Vehicle speeds, including specific limits on - South Range Road - Kahuterawa Road - Greens Road Operating hours for each access, including those referred to in condition 63.

Condition 63 Vehicles entering or exiting the site shall only travel on Greens Road or Kahuterawa Road at the following times:

Section 4.2

Section 8.2 Section 8.2.1 Section 8.2 (SRR only for this CTMP) Section 3 Not covered in this CTMP

Page 11

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

Time Period

Light Vehicles

Trucks 6:30am to 7:30am; 8:15am to 3:15pm; and 4:30pm to 6:00pm;

Weekdays

No restrictions

except that trucks shall not use the road when particular events, notified through community consultation, are held, and which involve a peak in the presence of vulnerable road users, such as equestrian or cycling events.

Condition relates to the Southern Turbine Zone, therefore no details included in this CTMP

In addition, the prohibition on access from 7:30am to 8:15am, and 3:15pm to 4:30pm only applies on school days.

6:30am to 7:30am; and 5:00pm to 6:00pm; Weekends and statutory holidays

70.9

except that up to 10 other light vehicle movements may occur outside of these times each day.

No truck access, except that up to 6 truck movements per day may occur on weekends and statutory holidays between the hours of 8am and 6pm.

Measures to ensure trucks use the Pahiatua-Aokautere Road access(es) wherever practical, and to ensure condition 61 is complied with.

Condition 61 Trucks shall generally enter and exit the site via the access(es) on Pahiatua Aokautere Road and only use the Greens Road access when it is impractical for that truck to use the Pahiatua-Aokautere Road access(es). Potential reasons for such access to be impractical include: 61.1 - During the initial stage of construction when the central portion of the internal road is being upgraded.

61.2 - When excavations close portions of the internal road.

61.3 - When the crawler crane is in such a position that it blocks portions of the internal road.

Section 8.1.1

Section 8.1.1

70.10

Measures to reduce the amount of commuter traffic by construction personnel

Section 8.2

70.11

Piloting arrangements and operating procedures for over-dimension turbine component transporters

Section 4.3.2 Appendices

Provisions for accommodating pedestrian, cycle and horse usage of the access roads

Condition relates to the Southern Turbine Zone, therefore no details included in this CTMP

70.12

Page 12

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

70.13

70.14

70.15

70.16 70.17 Advice Note:

1.5

Driver protocols, including prohibition on engine braking on Kahuterawa Road and the flat portion of Greens Road, and “one in one out” arrangements for trucks on Kahuterawa Road during particular peak days when more than 40 truck movements per day are envisaged

Disciplinary procedures to be followed in the event that any project drivers breach the driver protocols on any other aspects of the CTMP, including that any project drivers who are the subject of a credible complaint in respect of adherence to the road rules and the CTMP shall have a vehicle tracking system (with driver behaviour functionality) installed in their vehicles Full details of the temporary traffic management plans to be used, including the conditions under which each plan would operate Procedures for communication with the local community and other road users regarding traffic management issues, including notification techniques such as emails, a dedicated website update, text messages, roadside notice boards, and/or newspaper advertisements Project contacts including a driver comments free phone number It is only necessary that one CTMP will be prepared to cover roads within both the Palmerston North City Council boundary and the Tararua District Council boundary respectively.

Condition relates to the Southern Turbine Zone, therefore no details included in this CTMP

Section 9.2

Section 7.4.2

Section 14 Section 9.2 -

References

The following parties and / or legislation have been referenced or consulted in the preparation of this report: • • • • • • •

New Zealand Transport Agency (NZTA) Kiwi Rail Napier City Council Palmerston North City Council Tararua District Council Government Roading Power Act 1989 Local Government Act 1974

Page 13

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

2

Project Details

Key traffic related details for the project are captured in the Traffic Design Group Ltd Transportation Assessment Report, dated August 2008.

Key changes that have occurred since then are: •

The overall number of turbines approved by the Board of Inquiry is less than what was assessed;

•

The project has been divided into two portions, with this current project only involving the Northern Turbine Zone, and only involving access from the north;

•

The size of the turbines has increased, such that the 44m blades envisaged for transport to the site will now be 55m long. The turbine components will be landed at Napier Port and trucked via SH2 to Pahiatua and then up to the access points on the PahiatuaAokautere Road. These effects are detailed in the Transport Feasibility Study undertaken by Tranzcarr Ltd;

•

The Manawatu Gorge has been permanently closed, meaning traffic flows on the Paihiatua-Aokautere Road have increased from around 1,500 vehicles per day (vpd) to around 4,450 vpd and 13% HCV. In response to this, interim safety measures have been installed at the South Range Road intersection to improve safety during the design and planning stage.

•

In the event of a traffic accident or coordinated planned works on Saddle Rd, construction traffic shall be minimised and/or rescheduled (if required) to mitigate congestion on Pahiatua-Aokautere Road. The Mercury Turitea Project free phone number will receive the initial notification and appropriate mitigation measures will then be implemented by the site construction management team.

Page 14

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

3

Construction staging and sequencing

3.1

Works Programme

Due to the nature, scale and programme of the project, construction will be undertaken on a number of fronts or work faces, such that different construction operations will, at times, be simultaneously progressed across all construction zones.

As each construction zone is accessed, the approach will involve: •

•

•

Preparatory works – Initial works to enable Establishment Works and Construction Work, such as: o

Site Survey;

o

Investigations (including geotechnical investigation); and

o

Monitoring;

Establishment works - Progressively opening up and establishing the site, including: o

Land disturbance activities to establish site access, access tracks, construction yard and accommodation areas, laydown areas and spoil disposal sites and associated erosion and sediment controls.

o

Construction and/or widening of roads/tracks to access construction areas and install sediment control measures (e.g. sediment control ponds);

o

Vegetation clearance

o

Establishment of construction yard and accommodation areas;

o

Establishing full width access tracks/haul roads;

o

Installing remaining erosion and sediment controls

Main Construction works – Construction works, including: o

Temporary and permanent drainage installation;

o

Bulk earthwork (including cut and fill activities)

o

Wind turbine foundations;

o

Pavements and Surfacing; and

o

Site reinstatement;

The figure below shows the indicative construction programme and sequencing for the project.

Page 15

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

Figure 3 – Indicative construction programme and sequencing

Page 16

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

3.2

Working Hours

Standard working hours will be as follows: •

Monday to Saturday: 0730 – 1800

There will however be some construction activities undertaken outside the standard working hours. These activities may include; •

Works on the existing Pahiatua Aokautere Road, including construction of site access points at the start of the project.

•

Afterhours material and plant delivery, including equipment and materials where the transport of oversize loads outside working hours will be less disruptive;

•

Early morning concrete pours; and

•

On-site servicing of plant and equipment to minimise impacts on construction programme.

Any activities undertaken outside the standard working hours will be in compliance with the project Construction Noise Management Plan.

However, in general, extended working hours will be as follows: • •

Monday to Saturday: 0630 – 2000 Sunday: 0730 – 1800

Page 17

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

4 4.1

Roading upgrades South Range Rd – Pahiatua-Aokautere Rd

During the project, all traffic (with the exception of WTG blade over-dimensioned loads) will enter and exit site through the new entrance between the South Range Road (SRR) and Pahiatua-Aokautere Road.

This improvement is important as the current intersection is located adjacent to a blind corner which makes the entrance and exit dangerous and not fit for construction traffic and the general public.

As noted on the construction programme, the construction of this new intersection will start in September 2019.

To facilitate construction of the new entrance, two TMP’s will be required as detailed in Section 1.2 above. The first of these TMP’s, for the road widening on Pahiatua-Aokautere Road, has been submitted to PNCC and approved on the 27th August 2019 (Ref: CAR R614855). Please refer to Appendix D for further details Work on the other TMP’s identified is on-going and these documents will be lodged with PNCC for approval with sufficient notice in order to meet the timelines identified in the works programme.

Following the closure of the old South Range Road, barricades will be placed preventing public access with signage advising public of the changed layout.

Page 18

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

4.1.1

Existing Intersection

The existing intersection is used by the land owners who live on SRR, hunters who have access to the reserve and by the public, although there is very little use by the general public.

After the completion of the new access, the existing entrance will be physically closed as required by Condition 54.3 of the Consent.

With the need for heavy plant to operate along and across South Range Road, it is proposed to limit entry to the new access to the PNCC Pest Controller, Ecology Monitoring personnel, Iwi representatives, and workers with legitimate access requirements only to reduce the risk of interaction with construction equipment during construction.

The personnel concerned will continue to have access following an induction and the establishment of communication protocols for movement along SRR. The personnel noted above will also be able to communicate with construction plant via the same radio frequency.

Existing hunting licences currently in-place are to be suspended for the duration of construction.

Additionally, existing ‘lifestyle’ landowners on SRR are relocating and public access does not extend into the Turitea Reserve, With all of the above in mind, these initiatives are considered to provide a workable solution which will provide the safest way to manage the substantial earthworks that are to occur along SRR. This approach also mirrors that taken with the development of previous wind farms along the Tararua Range.

Page 19

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

4.2

Pahiatua-Aokautere Road Eastern site access

The current Pahiatua-Aokautere Road has sharp corners and is too narrow for trucks to deliver the 55 metre blades through the main entrance. As such, an Eastern Site Access (Figure 4.2) will be built near WTG 09.

This access will be built in general accordance with “Pahiatua-Aokautere Road – Eastern Site Access (TDG drawing 8488-3W1, Sheet 9, Revision A)”.

Figure 4.2- “Pahiatua-Aokautere Road – Eastern Site Access (TDG drawing 8488-3W1, Sheet 9, Revision A)”

This access will not be needed until the turbine components are delivered in February 2020.

The detailed design for this access will therefore be designed and reviewed in the interim period, with the details to be included in a revision of this CTMP. Engineering designs will also be submitted for approval by Tararua District Council.

Page 20

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

4.3

Necessary road improvement for overdimension loads (ODLs)

In addition to the Pahiatua-Aokautere Road - Eastern Site Access, further road improvements will have to be undertaken to facilitate the movement of over-dimension loads (ODLs) to the site.

4.3.1

South Range Road (SRR)

The entire extent of SRR will be improved as the road and corners will be cut and the road straightened to facilitate the delivery of large WTG components. Furthermore, to facilitate site traffic, the road will be widened to 5.5 metres with a base graded aggregate for roadbed.

Additionally, a ditch will be running next to the new access track to maintain erosion control.

Please refer to the road cross section figure below.

Figure 4.3 – South Range Road cross section after improvement

Engineering drawings and specifications, detailing these upgrade works, will be submitted for approval to the relevant authorities in phases in order to meet the timelines identified in the works programme.

Page 21

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

4.3.2

Improvements to the public road network

Few improvements to the public road network are needed to accommodate the traffic associated with the wind farm. The extent of road improvements required to accommodate over dimension loads will be determined at the detailed-design stage with a delivery route test-run, completed using a simulated blade-delivery trailer.

The trailer will be extended to the same dimensions as required to carry the blades and the blade overhang from the rear of the trailer simulated with a length of PE pipe (that can be moved if required to pass an obstacle encountered).

Prior to conducting the test-run, the necessary permit applications will be made and approved by the relevant authorities.

The test vehicle will be accompanied by certified pilots to control traffic, comprising two front and one rear, in line with the requirements of the Vehicle Dimension and Mass Rules.

The test-vehicle will drive the delivery route from the port of Napier to site and test the known pinch points to determine the full extent of road modifications and street furniture removal required. Traffic will be stopped by the pilot vehicles momentarily at these pinch points as required.

As an additional aid to traverse pinch-points, the blade trailer will have manual-steering functionality allowing the rear trailer wheels to be adjusted to move the load further away from obstacles.

As noted in the Tranzcarr Feasibility Study included in Appendix C, few pinch points have been identified on the route and therefore, the amount of modifications to the public road network, is not envisaged to be substantial.

By testing the route, modifications are kept to a minimum.

The test-run has been conducted by experienced professionals from Tranzcarr who will have conducted many similar operations in the past.

The test-run was undertaken using a mock blade scenario. Analysis of the test-run ‘pinchpoint’ locations are currently being undertaken, with foreseen road widening works required on the Pahiatua-Aokautere Road north of the construction project. With the intention these works will be undertaken by Higgins in conjunction the Pahiatua-Aokautere Road safety improvements.

All road modification work will then be designed and submitted to the relevant road controlling authority for approval in accordance with the applicable provisions of the Government Roading Power Act 1989 and the Local Government Act 1974.

For further information, please refer to the Transport Feasibility Study for the V112 turbine components undertaken by Tranzcarr Heavy Haulage Ltd on behalf of Vestas which is included as Appendix C of this plan.

The delivery route test-run was undertaken on Thursday 12th September 2019.

Page 22

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

5 5.1

Pavement Maintenance South Range Road

As described earlier in this plan, the existing SRR will be rebuilt to a much higher standard than it currently is, with a wider cross-section, stronger pavement and drainage to prevent erosion.

Figure 5.1 – Current layout drawing of the turbines and the South Range Road improvement

Page 23

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

Prior to the commencement of upgrade works, a video survey of the road will be undertaken to provide a record of the current condition and to provide a visual baseline to review the improvements against. Additionally, the construction team and PNCC will conduct a joint drive-over along SRR to understand the upgrade works in more detail.

In particular, the video survey and drive-over will consider the following items: • • • •

Pavement surface condition Drainage channels Cut batters Fills

An inspection and maintenance programme will be also be developed by the construction team to ensure that any damage to the road is identified and repaired to allow continuous use during construction.

During the construction period it is also anticipated that random condition inspections will be undertaken by PNCC (or their representatives) and that a final inspection will be undertaken prior to handover. .

Page 24

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

6

Construction activities that may generate traffic effects

The new SRR will be constructed off-line from the existing track, with most of the earthwork cut material being used on site. As such, there will be relatively little interaction with general traffic using the Pahiatua-Aokautere Road. The scope for adverse traffic effects associated with construction of the project will be limited in this regard.

The construction activities that have the potential to generate adverse traffic effects will be generally limited to: •

•

• •

•

Operation of the site access points located along the Pahiatua-Aokautere Road (the new intersection between the SRR and Pahiatua-Aokautere Road and the Eastern Site Access), where there is a risk of potential interaction between a passing public vehicle and a project / construction vehicle entering or exiting the site; These risks will be mitigated by constructing the new site entrances to allow project / construction vehicles to move off the road quickly – either to a new shoulder (SRR / Pahiatua-Aokautere Road entrance) or by recessing entrance gates to allow vehicles to park and open gates when locked (Eastern Site Access).

Travel along the Pahiatua-Aokautere Road by construction vehicles (trucks and light vehicles. The increase in number of vehicles using this section of road has the potential to result in temporary delays to other road users.

Where necessary, these risks will be managed by the development of specific TMP’s as follows; o Rolling blocks/mobile temporary closures for heavy plant transporters or heavy slow turning trucks entering the old South Range Rd entrance (prior to construction of new SRR entrance) o VMS boards advising road users of changed road layout or potential increase travel duration o Coordination of heavy truck and trailer units (T&T) movement outside peak hours and/or rescheduling due to accidents or agreed planned works o Staggering of heavy truck and trailer units leaving e.g. quarry to mitigate a convoy of trucks arriving to site taking up the entire right hand turning lane and more. o Utilisation of the passing bay/waiting bay by site gate man with radio communication with truck drivers, e.g. risk of the right hand turning lane backing up External activities that may impact upon construction traffic movements (will be managed case by case), although planned event will be generally managed accordingly; o Widening works undertaken by Opus; Higgins weekly traffic management reports have been requested and will be sent by Kyle Russell (Project Manager) with our traffic movements strategy reviewed weekly and coordinated to mitigate adverse effects to road users o Maintenance works undertaken by Higgins; Notification from Higgins traffic management/maintenance team advising the project team of their upcoming

Page 25

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

o

works. Our traffic movements shall be then coordinated to mitigate adverse effects to road users 2020 cycle race; Traffic movements will be rescheduled either before/after the event. With all site light vehicle access restricted/prohibited until after the event

Page 26

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

7 7.1

Construction Traffic Management Philosophy

The overarching philosophy for the management of construction traffic during the Project is to: • Maximise safety of the project staff, pest controller and visitors travelling on site; • Enable construction efficiencies; • Minimise delays to the public and road users; • Minimise disruption to property access; and • Ensure appropriate access for emergency vehicles This will be achieved by a high standard of: • Planning construction traffic movement; • Design of material stockpile/staging areas, taking into account site security access points and temporary traffic management; • Maintenance of roads, signs, and work sites; and • Communication internally within the Project, pest control and monitoring staff.

Page 27

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

7.2

Roles and responsibilities

General roles and responsibilities for the Project are outlined in the HSE Management Plan.

Specific roles and responsibilities relating to the implementation of this CTMP are detailed in Table 7.22.

Table 7.2 - Roles and responsibilities Role

Responsibility

Safety Manager

•

Oversight and advice on the safety of the interfaces with the travelling public

Project Manager

• • •

Ensure the approved CTMP is implemented

•

Prepare and submit Temporary Traffic Management Plans (TMPs) for local roads

•

Audit TTM

Site Traffic

•

Implement TTM on public roads in accordance with approved Traffic Management Plans (refer to section 7.4.2)

Supervisor (STMS)

•

Maintain TTM records

Traffic Controller

•

Fulfil manual traffic control roles on-site as directed by the STMS

Road Controlling

•

Fulfil obligations as required, including approving TMPs for works within the Local Road Corridor as necessary

•

Auditing to assess compliance with the TMP

Project Engineer

Management

Ensure staff are trained to the required level Ensure Temporary Traffic Management (TTM) records / monitoring results are kept and TTM audits undertaken

(TC)

Authority (RCA)

Page 28

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

7.3

Management procedures

A number of procedures exist to identify and address risks associated with temporary traffic management during construction of the Project as outlined below.

7.3.1

Site Staff

All staff involved in the Project will attend a Project induction prior to the commencement of work to ensure a common basis for approaching their work. The induction will include environmental, health and safety and hazard management in relation to the Project area, along with temporary traffic control (refer to Section 10 of this CTMP).

Training will include the following: • Specific training will be provided to those involved in temporary traffic management as appropriate to their role and responsibilities.

• Regular toolbox talks will provide a forum to reinforce and educate Project staff around specific temporary traffic control issues and actions during the Project.

• The STMS will also conduct briefings on-site prior to every TTM operation (for the intersection upgrade works) to identify hazards pertaining to the work site and controls to be implemented to protect the safety of Project staff and public.

7.3.2

Personal Protective Equipment (PPE)

As a minimum, all personnel working on site must wear standard PPE, including: • • • • •

Hard hat Eye protection Cuff to ankle cover (long trousers and long sleeves) High visibility vest or garment.

Safety boots

Construction workers will therefore be clearly visible, and will set a consistently high level of PPE and appearance across the site.

Page 29

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

7.4 7.4.1

Construction and Temporary Traffic Planning Construction Pack Planning

Construction of the Project will be divided into a number of construction activities. As part of the planning process, a construction pack will be developed for each activity comprising:    

The design plans and specifications applicable to the activities covered by the construction pack; A Method Statement describing exactly how the work will be undertaken and the hold points for checks, approvals, and records; A Job Safety and Environmental Analysis (JSEA) documenting the identification, assessment and mitigation of safety and environmental risks associated with the activity; and Permits required for the respective works, for example: o Approved TMP’s. o Earthworks permits o Discharge permits

The construction pack will then be reviewed and signed off by the appropriate Manager, (or their respective delegates), usually within 24 hours and with changes made as necessary for approval.

Temporary traffic management requirements associated with work activities will be included in the construction packs.

7.4.2

Traffic Management Plan

Temporary Traffic Management Plans (TMPs) will be required for all work within the live road corridor, as identified in Section 1.2 TMPs will follow the format set in CoPTTM (Code of Practice for Temporary Traffic Management).

They will describe the measures to be implemented to manage the temporary traffic effects associated with temporary road layouts or traffic controls required for specific corridor works.

TMPs will be submitted to, and approved by, the Traffic Management Coordinator responsible for the section of road involved, i.e. by PNCC, TDC & NZTA/Higgins.

The TMPs will be assessed by the Traffic Management Coordinator for compliance with CoPTTM and the ability to avoid adverse effects on the travelling public.

TMPs for the project works will be prepared in accordance with the time period outlined in CoPTTM.

Page 30

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

7.5

Implementation

Each day’s work will begin with a Job Start Briefing for each crew, at which point the specific work being undertaken that day will be discussed and documented, including the risks involved and the mitigation measures to be implemented to avoid or mitigate the risks i.e. temporary traffic control measures.

Any issues which cannot be solved by the crew will be escalated to the Project Manager as appropriate.

Page 31

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

8 8.1

Mitigation measures Site Access Controls

The site access points for the construction area have been selected to enable construction to proceed safely and efficiently, and with appropriate traffic management controls in place to provide for the safe operation

8.1.1

New intersection of South Range Rd and Pahiatua-Aokautere Road

All the traffic will enter and exit the site through the new intersection. A sign-in box will be installed, set-back from the public road, where every driver will have to stop and sign the Job Briefing to be aware of the daily activity and the vehicle movement plan. Additionally, a site entrance sign will be displayed at the entrance with the relevant information concerning the site and contact persons.

The sign-in book will provide the basis for keeping records of the number of vehicles entering and exiting the site.

The majority of light vehicles will be arriving to site prior to 7:00am to attend the daily prestart meeting. Heavy trucks shall be coordinated to arrive outside peak hours. A controlled gate will be located far enough inside the construction site to provide limited parking area for heavy truck & trailer units. All trucks are fitted with radio communication and shall be directed to arrive to site separately i.e. staggered leaving the source.

8.1.2

Pahiatua-Aokautere Road Eastern site access

The eastern site access will be closed and locked except when required to accommodate over-sized blade deliveries.

A pre-delivery meeting will be carried out with the transport company and the traffic management personnel to organise these deliveries.

8.1.3

Greens Road Access

The access from Greens Road which was envisaged in the Consent, will not be used by traffic constructing the northern turbine zone.

Page 32

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

8.2

Construction Traffic Movements

A large number of construction vehicle movements will be required over the course of the project. Truck movements will be required for the transport of spoil, aggregate, concrete, plant and equipment for the project. Trucks will enter and exit the site as outlined in Section 8.1 above.

Some oversize loads may be transported to site outside typical working hours if required, to minimise effects on the public road network.

Construction vehicles will use Pahiatua-Aokautere Road to access the project. At peak periods, a total of 100 to 130 staff are expected to be on site at any one time. Staff will travel to site by a combination of single occupant vehicles, while others will carpool with three to four people per vehicle. Assuming an average of two occupants/vehicle, staff will correspond to an additional 130 movements/day during peak times. Project construction yards will have dedicated car parking available for staff.

In order to reduce the amount of commuter traffic by construction personnel, the project will encourage carpooling as far as reasonably practicable.

For construction to proceed efficiently, the appropriate speed controls need to be in place to provide for the safe transit of construction traffic. A speed limit of 30km/hr maximum will be in implemented throughout the construction works. This covers SRR and the various turbine site access tracks. Additionally, a site-wide policy for the use of strobes/hazard lights shall be implemented.

Page 33

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

8.2.1

Traffic Volumes

Traffic volumes for civil works construction are typically generated by material / equipment deliveries and waste material removal.

The estimated truck movements that will access site from Pahiatua Aokautere Rd using the new access (Track 21), is summarised in the below table.

Description

Plant & equipment Civil works

Month 1

Month 2

Month 3

Month 4

Month 5

Month 6

Month 7

Month 8

Month 9

Month 10

Sep 2019

Oct 2019

Nov 2019

Dec 2019

Jan 2020

Feb 2020

Mar 2020

Apr 2020

May 2020

June 2020

18

30

30

20

20

20

30

35

14

22

22

22

30

30

22

22

57

930

830

312

770

366

331

3

3

3

3

3

3

3

195

325

585

585

325

195

10

10

10

10

10

10

Aggregate (road/hardstand) (truck and trailer 20t per/load) Reinforcing steel Concrete (turbine/ substation) (conc truck 5m3 per/load) Miscellaneous

10

10

10

20

• Each truck movement represents 1 trip = 2 movements • Does not include light vehicles and fuel trucks (estimated between 25ea - 35ea during per day) • Does not include wind turbine deliveries

A summary of the estimated turbine component deliveries are also summarised in the table overleaf.

Page 34

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

Month 1

Month 2

Month 3

Month 4

Month 5

Month 6

Month 7

Month 8

Feb 2020

Mar 2020

Apr 2020

May 2020

June 2020

July 2020

Aug 2020

Sept 2020

Tower Section Bottom

2

5

5

5

5

5

4

2

33

Tower Section Top

2

5

5

5

5

5

4

2

33

Nacelles

2

5

5

5

5

5

4

2

33

Drive-Trains

2

5

5

5

5

5

4

2

33

Cooler Tops

2

5

5

5

5

5

4

2

33

Blades

6

15

15

15

15

15

12

6

99

Miscellaneous

3

10

10

10

10

10

10

3

66

Description

Total

• Each truck movement represents 1 trip = 2 movements • Does not include light vehicles and fuel trucks (estimated between 5ea - 10ea during per day)

Please note that all figures in the tables below are estimated typical start and finish times of construction vehicles entering and leaving site respectively.

Vestas

05:30am 06:30am 06:45am 07:00am 07:15am 07:30am 07:45am 08:30am 15:30pm 15:45pm 16:00pm 16:15pm 16:30pm 16:45pm 17:00pm 17:15pm 17:30pm 17:45pm

06:30am 06:45am 07:00am 07:15am 07:30am 07:45am 08:00am 15:30pm 15:45pm 16:00pm 16:15pm 16:30pm 16:45pm 17:00pm 17:15pm 17:30pm 17:45pm 18:00pm

2 3 2 3

Employer

BOP Contractor

Civil Sub Contractor

12 20

10 2

1

1

Electrical Subcontractor

Aggregate / Concrete movements

General Delivery’s

13 2 6

4

6

1 1

4 1 1 56 5 1

1

8

1 2 2 3 2 1

1

5 12 10 5

1 1 10

6 2 6

Page 35

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

9

Monitoring

9.1

Traffic

Table 9.1 outlines the temporary traffic monitoring to be undertaken during construction of the Project.

Table 9.1 - Construction Traffic Management monitoring programme Monitoring Activities

Frequency

Responsibility

Check method statement reflects

Prior to approving Work

Project Manager (or

Inspect temporary traffic management layout

As required while site is

STMS / TC

Documented check of all temporary traffic

Daily and as layouts

STMS / TC

TTM Audit in accordance with CoPTTM

As required, but not less

Project Engineer

Road Condition

Weekly

Site Engineer

Complaints Register

Continuous

Mercury Stakeholder

requirements and requisite TMP has been approved

management

Packs

in operation

change

than monthly

respective delegate)

Liaison

Furthermore, the site will keep a record of all vehicles travelling in and out of the site during construction, including the date and time, the access used, whether the vehicles is entering or exiting, and whether it is a light vehicle or truck. This record will be submitted to the Roading Managers of PNCC and TDC on a monthly basis.

Table 9.2 – Pahiatua Aokautere Rd hourly traffic count data

Traffic counts undertaken on the Pahiatua Aokautere Rd during peak hours (conducted on the 16th & 17th September 2019). These traffic flows have also been captured on the schedule overleaf.

Page 36

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

Non

Construction Traffic

Non

Construction Traffic

heading East towards

heading West towards

Pahiatua

Palmerston North

05:30am

06:30am

06:30am

06:45am

9

30

06:45am

07:00am

12

31

07:00am

07:15am

15

35

07:15am

07:30am

14

46

07:30am

07:45am

20

51

07:45am

08:00am

26

32

08:30am

15:30pm

15:30pm

15:45pm

15:45pm

16:00pm

16:00pm

16:15pm

16:15pm

16:30pm

16:30pm

16:45pm

52

32

16:45pm

17:00pm

77

38

17:00pm

17:15pm

62

34

17:15pm

17:30pm

42

29

17:30pm

17:45pm

49

32

17:45pm

18:00pm

39

24

Page 37

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

9.2

Driver Comments

A project free phone number of [0800 10 18 10] will operate during the project duration and will be publicised at the entrance to site. The number will also be communicated by Mercury NZ at the monthly Community Liaison Group (CLG) meetings. A record will kept of all calls, and a summary provided to the Roading Managers of PNCC and TDC within 5 working days of any request.

The summary will also include a review of the effectiveness of the CTMP. Any complaints will be investigated to identify the driver if possible and the circumstances of the complaint. Any drivers breaching the requirements of the CTMP or road rules will be subject to disciplinary procedures which may include: • • • •

Verbal warning Written warning Installation of vehicle tracking systems (with driver behaviour functionality).

Removal from the project

Page 38

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

10

Training

General training requirements in relation to the construction of the Project are outlined in the HSE Management Plan. Training in relation to temporary traffic management is outlined in Table 9.

Table 9 - Training Requirements Qualification/Training

Description

Who

Project Induction

Initial hour-long

All Project staff, including site staff, office staff

10.1 below for detail)

without an escort

Toolbox talks

induction (refer to Section

Weekly or Fortnightly

meetings, to highlight key

and anyone who is approved to enter the site

All site staff working on the Project at the time

messages or issues, and receive feedback Site Traffic

NZQA Qualification to

Persons responsible for traffic management

Supervisor (STMS)

environment

intersections are constructed along Pahiatua-

Management

Traffic Controller (TC)

oversee site in live road

associated with the Project while the new Aokautere Road

NZQA Qualification to

All staff undertaking traffic management

management

intersections are constructed along Pahiatua-

assist with traffic

associated with the Project while the new Aokautere Road

Page 39

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

10.1

Project Induction

The Project induction will address (but not be limited to) the following matters relevant to this Plan: • Information about the Turitea environment - including those that relate to traffic management and safety of site staff and road users; • Roles and responsibilities of Project staff, including individual responsibilities around traffic management and safety; • Safety hazards, including weather, driving, water, and access with limited communication, amongst others; • Rules and processes to mitigate safety hazards; and • The emergency plan; Only once staff have attended the induction are they approved for general access to the site.

Page 40

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

11

Reporting

In addition to the documentation described in Section 9 (Monitoring), any injury events or serious near misses will be reported immediately to the Project Manager and to Mercury for discussion with external authorities as appropriate.

Page 41

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

12

Review

A review of the CTMP will be undertaken by the Project Management team if required. The review will take into consideration: •

Compliance with the project Consents and designation conditions, the WHSMP, the CEMP and other project management plans;

•

Any significant changes to construction activities or methods;

•

Key changes to roles and responsibilities within the Project team;

•

Results or inspections, monitoring and reporting procedures associated with the monitoring of adverse effects during construction;

•

Comments or recommendations from Palmerston North City Council and Tararua District Council or their representatives; and

•

Unresolved complaints and any response to complaints and remedial action taken to address the complaint.

Page 42

Construction Traffic Management Plan Turitea Wind Farm TWF-PM-PLN-0012-05_CTMP

13

Consultation & Communications

In preparing this CTMP, consultation with a number of groups has been taken into account.

The key issues raised, and responses are recorded below.

Group

Issue

Resolution

South Range Road residents

Safety

Interim 30 km/h speed limit.

Lifestyle landowners on SRR are relocating.

Community Liaison Group (CLG)

Safety

The new entrance improves safety on PahaituaAokautere Road.

Disruption / Nuisance

Night-time deliveries will be limited as much as possible.

PNCC Roading Manager TDC Roading Manager

Page 43

List of Appendices Appendix A - Proposed Construction Access Drawing Appendix B - Proposed Eastern Access Drawing Appendix C - WTG Components Transport Feasibility Study Appendix D – TMP: Pahiatua-Aokautere Road Widening

Downer New Zealand Limited

www.downergroup.co.nz

Page 44 of 48

Appendix A: Proposed Construction Access Drawing

Downer New Zealand Limited

www.downergroup.co.nz

Page 43 of 46

6 ?$OOLDQFH?'HVLJQ5HJLVWHU?5:?0HUFXU\?7XULWHD :)? 'HVLJQ

)LOHQDPH

60.00

'2:1(5 1=

501 Heads Road Wanganui PO Box 196 Wanganui 4501, NEW ZEALAND. Ph. (06) 349 2533 Fax. (06) 344 6579 W. www.downer.co.nz E. info@downer.co.nz

&23<5,*+7

This drawing, the design and concept, remain the exclusive property of Downer and may not be used without approval.

Copyright reserved.

,VVXHG

6.1%

4.0%

4.4%

5.2%

6.2%

5.7%

5.7%

5.7%

5.9%

5.9%

5.9%

5.9%

5.6%

5.4%

4.9%

4.5%

4.0%

1.7%

-0.6%

B=131째55'22" D=34.80

$PHQGPHQWV

B=134째46'46" D=59.71

R=300.00 L=176.58

-

$SSURYHG

PLAN VIEW C001

TITLE DWG NO.

26 August 2019

5 :RRGV RGV

&KHFNHG

S CROSSING CONSTRUCTION MAIN ACCESS PROJECT

LONG L OE NG C OV VE DSECTION SCALE 1:2000 (A3) CAR R614855 Pat Howard STMS Number u 'DWH 291 1DPH 1 WIND WIND FARM Palmerston t No orth City TURITEA Council %HFD

R=200.00 L=9.97

'HVLJQHG

6XUYH\HG

Scale Horizontal 1:2000 Vertical 1:2000

Alignment Details

R=500.00 L=82.45

B=110째30'07" D=15.45

R=45.00 L=54.08

TO PAHIATUA

'$7(

13 JUNE 2019

6&$/(

AS SHOWN

1 of

6+((7

-2%

5(9,6,21

0

FOR CONSTRUCTION

B=101째03'15" D=32.12

Station

6.2%

NATURAL

Datum R.L. 310.00

6.2%

350.7 351.1 0.00 10.00

4.9%

351.4 20.00

4.8%

351.8 30.00

4.8%

352.1 40.00

4.8%

352.5 50.00

4.8%

352.9 60.00

4.6%

353.5 70.00

5.5%

354.0 80.00

5.3%

354.5 90.00

5.4%

355.0 100.00

5.1%

355.6 110.00

5.2%

356.1 120.00

5.7%

356.6 130.00

5.3%

357.2 140.00

5.1%

357.7 150.00

5.0%

358.2 160.00

5.4%

358.8 170.00

5.6%

359.2 180.00

4.1%

359.7 190.00

4.1%

360.2 200.00

3.4%

360.7 210.00

3.4%

361.1 220.00

3.4%

361.6 230.00

3.4%

362.2 240.00

80.00

40.00

EXISTING CENTRELINE EXISTING EDGE OF SEAL

E

362.9 250.00

LAND PARCEL BDY (LINZ)

TRELIN

363.5 260.00

NEW CULVERT

SCALE 1:1200 (A3)

PLAN VIEW

NEW ACCESS ROAD INTO WIND FARM SITE. DESIGN BY OTHERS

LIGHT GREY HATCHING = NEW WIDENING PAVEMENT (704 m2) DARK GREY HATCHING = EXISTING PAVEMENT (2656 m2)

NG CEN

363.9 270.00

EXISTING FENCE

#2

EXISTI

364.3 280.00

NEW EDGE OF SEAL

SHEET

TIE IN TO

EXISTING CURVE RADIUS: 45m

364.9 290.00

NEW TOP OF BATTER

140.00

365.5 300.00

NEW CENTRELINE

100.0 0

NEW CURVE RADIUS: 300m DESIGN SPEED (INC LANE) 90 km/h DESIGN SPEED (INC LANE) 70 km/h SUPERELEVATION (DEC LANE) 4.0%

160.00

366.0 310.00

'UDZQ 6FDOH P

20.00

0.00

LEGEND

120.0 0

TOP OF BATTER - CUT TOE OF BATTER - FILL

180.00

366.6 320.00

INSPECT EXISTING CULVERT BENEATH CROSSING. ENGINEER TO BE NOTIFIED OF CONDITION AND APPROVE REPLACEMENT CULVERT

200.00

367.2 330.00

TO PALMERSTON NORTH

E

220.00

367.8 340.00

RELIN

240.00

368.4 350.00

CE NT

260.00

368.9 360.00

TING

0 280.0

369.5 370.00

TO EX IS

0 300.0

370.1 380.00

TIE IN

0 320.0

370.6 390.00

NEW RIGHT TURN BAY IN ACCORDANCE WITH FIGURE 3.25, MOTSAM - PART 2.

SEE SHEET #2 FOR DETAILS

340.00

371.1 400.00

360.00

371.6 410.00

380.00

372.0 420.00

EXISTING CENTRELINE BLACK OUT BETWEEN CH 260 to CH 360

400.00

372.1 430.00

420.00 372.1 440.00

AD RO GE R AN TH SO U

440 .00

CH900

PREPARED BY:

SW-7-A

CLIENT:

CULVERT LABEL

CULVERT

TURBINE NUMBER

DISPOSAL AREA

TURN OUT DRAIN

TURBINE CONSENT ZONE

PROPERTY BOUNDARY

WATERWAY CENTERLINE

DESIGN CONTOUR LINE (0.2m INTERVAL)

EXISTING CONTOUR LINE (2.0m INTERVAL)

CH800

SAG 824.184

600DIA RCP

SW-21-1

REV REVISION DESCRIPTION A FOR REVIEW B FOR REVIEW

* TOP OF CULVERT TO BE MIN 1200mm BELOW TRACK FSL FOR IN ROAD CABLE INSTALLATION

REFER T90-I Cubed-CV-DR-0105-01 FOR CULVERT CROSSING DETAILS AND COVER REQUIREMENTS.

375DIA RCP

3/600DIA RCP

CULVERT

* SW-20-1

SW-1-3

CULVERT NAME

CULVERTS

00 0.0 CH

DRN A.P. A.P.

CHK R.H. R.H.

BATCH PLANT

CH 600

MCY AP DATE 21.06.19 26.07.19

CH 40 0

00 0.0 CH

WTG 1

LEGEND

SCALE 1:2000

SITE LAYOUT PLAN - CIVIL AREA 1

SW-20-1

3

1 K2

K2

AC

07 1.9 10 0 CCHH10

CH 233 .80 8

WTG 06

CH 20 0

AC

TR

CH700

SITE ENTRY ON HOLD

14

4.5

43

0 CH50

TUA AO KAUTE

WTG 07

RE RD

EXISTING SOUTH RANGE ROAD

TURITEA WIND FARM DETAIL LAYOUT PLAN CIVIL AREA 1

G

SA

2 K2 AC 2 TR .51 5 55 T S E CR

SW-21-1

PAHIA

00 CH3

186 T 327.

CRES

SCALE 1:2000

TM

SITE LAYOUT PLAN - CIVIL AREA 1

WTG 08

CH 40 0

26.07.19 AS SHOWN

A.M. A3

Approved Sheet Size

T90-I Cubed-CV-DR-0011

Drawing Number

26.07.19

1

21.06.19

CK

R.H.

TRA

A.P.

Scale

EXISTING SOUTH RANGE ROAD

Checked

.000 CH0

SAG 88.314

CH100

CREST 131.159

SAG 153.753

CH200

79 24.3 ST 2 CRE

14

4.5

43

.243 241 SAG

G

SA

000 CH1

Drawn

TRACK 20

COUNCIL ROAD CROSSING REFER T90-I Cubed-CV-DR-0501-1 FOR DETAILS

0 10 CH

00 11 CH

CH10 0

CH0.

000

TR 67 0.6 13 CH

Sheet Number

B

Drawing Revision

Folder Reference

SW-1-3

SAG 943 659

Appendix B: Proposed Eastern Access Drawing

Downer New Zealand Limited

www.downergroup.co.nz

Page 44 of 46

Appendix C: WTG Component Transport Feasibility Study

Downer New Zealand Limited

www.downergroup.co.nz

Page 45 of 46

Turitea Windfarm

PREPARED FOR

VESTAS WIND SYSTEMS BY TRANZCARR HEAVY HAULAGE LTD

July 2018

CONTENTS

1.0

INTRODUCTION

2.0

ROUTE SELECTION

2.1

New Zealand Transport Agency (NZTA)

2.2

Tararua District Council

2.3

Kiwi Rail

2.4

Route ex Port of Napier to site.

2.4.1

Ahuriri Bypass.

2.4.2

Hydrabad Road-Prebensen Drive

2.4.3

Prebensen Drive – Sivern Street

2.4.4

Prebensen Drive to SH 2B

2.4.5

SH 2B-SH 50

2.4.6

SH 50A to SH 2 south

2.4.7

SH 2 Waipakurau

2.4.8

SH 2 – Norsewood bypass

2.4.9

SH 2 – Woodville

2.4.10

Pahiatua Township

2.4.11

Pahiatua Mangahao Road to site.

3.0

Port Facilities

4.0

Overhead Power Companies

5.0

Conclusions

APPENDICES 1.

2.

NZTA Feasibility Permit Site Map

2

SUMMARY OF PHOTOS 1

Tower section West wind Windfarm

2

Ahuriri Bypass through Rail property to avoid Peanut roundabout

3

Aerial shot of Ahuriri â&#x20AC;&#x153;Peanutâ&#x20AC;? roundabout with bypass shown

4 and 5

Hydrabad/Prebenson roundabouts

6 and 7

Prebensen/Sivern roundabout

8

SH 2B intersection

9

Longlands Roundabout

10

Aerial photo of Longlands Road roundabout

11

Entrance to SH50A and SH 2 roundabout

12

SH50A and SH 2 roundabout view from the north

13

SH50A and SH 2 roundabout view looking south

14

Peel St bypass Waipakurau

15 and 16

Norsewood bypass south

17 and 18

SH 2 into Tay Street, Woodville

19 and 20

Tay Street to Station Road in Woodville

21 and 22

Station Road back onto SH 2

23

SH 2 onto Pahiatua Mangahao Road

24

SH 2 to Pahiatua Mangahao Road

25

Pahiatua Managhao Road Arch Bridge

26

Pahiatua Mangahao Road Rail Crossing

27 and 28

Pahiatua Mangahao Road

29 and 30

Makomako Road bridge crossing

31

Makomako Road

32

Start of Pahiatua Aokatere Road.

33 and 34

Pahiatua Aokatere Road

35 and 36

Pahiatua Aokatere Road site entrance #1

37 and 38

Pahiatua Aokatere Road

39 and 40

Pahiatua Aokatere Road

41

Pahiatau Aokatere Road site entrance #2

42 and 43

Access to Port Storage facilities on Thames Street

44

Route map from Port of Napier to Thames Street Storage areas

3

1.0

INTRODUCTION

Mercury proposes to develop a wind farm in and around the Turitea Reserve area, on the Tararua Ranges. The site is South East of Palmerston North City. The site location is in an area where there are presently existing wind farms in operation.

Tranzcarr Heavy Haulage Ltd from Auckland, have been commissioned by Vestas Wind Systems from Melbourne in Australia, to complete the Transport Feasibility Assessment for the site. Vestas are a supplier to Mercury and are proposing to transport Wind Turbine components from the Port of Napier to site. This assessment has focused on the effects associated with transporting the oversized loads; details of which are annexed to this report.

Tranzcarr Heavy Haulage Ltd is an Auckland based heavy haulage operator, working throughout New Zealand and also the South Pacific. Since 2004 Tranzcarr has worked on every major wind farm project in New Zealand, including Te Apiti, White Hills, Tararua, West Wind, Te Uku and Mill Creek; in total, complete transport of some 235 Turbines up to 3.0MW. This includes the longest blades at 49.0m and heaviest towers at 76tonne, and Nacelles at 86tonne, transported to the sites.

Tranzcarr has also developed the only fleet of specialised Ultra Heavy Haulage Prime Movers that allows these loads to be hauled on Wind Farm sites with gradients up to 21percent.

Photo 1 - Tower section West wind Windfarm

Tranzcarr have previously looked at many options for the Turitea site, including deliveries from either New Plymouth or Napier. For the purposes of the present inquiry, the focus is haulage from Napier Port.

4

2.0

ROUTE SELECTION

A site photo, included in Appendix 2, shows the general location of the proposed site, as advised by Vestas Wind Systems, as well as the surrounding road network. Access has been reviewed on the two locations advised and entry is form the eastern side of the Tararua Range via Pahiatua.

The State Highway network within the region that would generally be utilised for the strategic transport requirements of the project, includes SH2 between Napier and Pahiatua.

Appendix 2 is a photo that details the vicinity of the site and access points. The Pahiatua Track Road links east and west (SH 2 to SH 57) across the Tararua Range to the access network for this project.

This road is also a very strategic road of importance to the region. Whilst the Manawatu Gorge Road remains closed, (Permanent closure for the foreseeable future); traffic volumes on this road can be very high and some of the corners and gradients identified elsewhere in this report, will prove to be difficult for the heavy and long loads required.

There are three options that could be considered as possible Ports of entry. Wellington is discarded, due to difficulties associated with heavy and high loads exiting of the Port and City, and large traffic volumes. New Plymouth Port was used for the Tararua 3 extension, however for this project the access to the site from the eastern side of the Range, makes Napier the best option. The Napier option is also less kilometres and therefore more efficient to keep up with delivery schedules and cost for transport.

The approved route for the heavier loads, has been assessed by the following agencies: • • • •

New Zealand Transport Agency Napier City Council Tararua District Council Kiwi Rail for level line crossings

A more detailed study of the route identifying areas of concern, follows elsewhere in this report. .

2.1

New Zealand Transport Agency (NZTA)

All over dimension and overweight loads hauled on the road network, are controlled by permits issued by NZTA. For this report Tranzcarr applied for approval to haul the heaviest load being part of the Nacelle from the Port of Napier to the site entrance off the Pahiatua Track Road, adjacent to North Ridge Road. A copy of the feasibility permit issued No: NP/S/18/0842 is annexed in this report.

This is not a final permit, but does cover the route and provide details on the bridge structures that will need to be crossed and the conditions of travel imposed. Tranzcarr considered the different route options detailed with NZTA and the local councils for the heavy loads on this project.

5

2.2

Tararua District Council

The main State Highway network, travels through the city of Napier and South via Woodville to Pahiatua. The road East from Pahiatua and over the Pahiatua Saddle Road, is controlled and managed by the Tararua District Council. They have reviewed the information approved by NZTA in their route feasibility assessment and a copy of the council permit is included in this report.

Travel time restrictions for the local area are set out in the Land Transport Vehicle Dimension and Mass Rule 41001 and its amendments.

Section C3.3 Travel time and zone restrictions of the above Rule from NZ Transport Agency Permitting Manual (2nd edition).

Prohibited Travel time for loads up to and including 5metres wide Travel is not allowed, at the following times: Monday to Thursday Friday Saturday Sunday

0630 - 900am 0630 - 900am 0.00 â&#x20AC;&#x201C; 0500am 0.00 â&#x20AC;&#x201C; 0500am

1600-1800pm 1600-2400pm 1200-2400pm 1200-2230pm

The travel restriction time between 6.30 and 9.00 hours and 16.00 and 18.00 hours, apply to City areas only. For this project, these restrictions only apply to Napier City.

The long blade loads would be better suited to be hauled through Napier to the southern boundary and clear prior to 0630am, to avoid the restrictions above, and also the traffic issues with such a long load being hauled through the City limit.

2.3

Kiwi Rail

There are a number of level rail crossings on the route; a permit approval will need to be issued by Kiwi Rail to allow travel. It is not expected there will be any difficulties in obtaining the approval necessary to move. All large over-dimensional and heavy loads need to be recorded into Kiwi Rail, prior to crossing any level track intersection.

The bypass at Ahuriri in Napier is also owned by Kiwirail and co-ordination for all loads will be a requirement.

6

2.4

Route ex Port of Napier to site.

The route off the Port and also covering the proposed storage off the Port, is detailed in the following section, 3.0 of this report. The route via the State Highway network is identified here.

From our assessment, the following route has been identified as the most practical and appropriate and provides the best transportation outcome for the project, taking in to account the size of the loads and other road users.

• • • • • •

Port via Breakwater Road to Ahuriri Bypass Use of over-dimensional bypass at Ahuriri “peanut” roundabout, see Photo 2 Bridge Street to Hydrabad Road Prebensen Drive from Hydrabad Road to SH 50.

Napier-Hastings Expressway via SH50A and SH 50 south to SH2.

SH 2 south to Pahiatua with exception of bypass routes: i. ii. iii.

•

Peel Street and The Esplanade (heavy traffic bypass) in Waipukurau.

Norsewood bypass to avoid over-bridge.

Tay Street to Station Street (heavy traffic bypass) in Woodville.

Pahiatua Mangahao Road to Makomako Road, Pahiatua Aokatere Road to site entrances.

7

2.4.1

Ahuriri Bypass.

This bypass was installed for the Te Apiti Windfarm Project and is available for use.

Coordination with Kiwi Rail is required to gain access on a daily basis and operators need to work in with Train Shunt movements on and off the Port area.

Photo 2 - Ahuriri Bypass through Rail property to avoid Peanut roundabout

Photo 3 – Aerial shot of Ahuriri “Peanut” roundabout with bypass shown

8

2.4.2

Hydrabad Road-Prebensen Drive

2.4.3

Prebensen Drive â&#x20AC;&#x201C; Sivern Street

Photo 6 and 7 â&#x20AC;&#x201C; Prebensen/Sivern roundabout, no problems with this route

This route will also be the exit route from the Thames Street storage yard, should this be used as a possible storage area off the Port. This is a large wide road; possible removal of road signs only for long loads to pass through.

9

2.4.4

Prebensen Drive to SH 2B

Photo 8 – SH 2B intersection

Left turn from Prebensen Drive onto SH 2B South will need to be widened for the long Blade loads. Guard rails on the inside corner with a light Pole (seen in Photo 8), restricts turning circle. The grass area shown in above photo could be sealed to allow a greater turning circle to potentially avoid removal of light Pole and guard rail.

2.4.5

SH 2B-SH 50

This section of the highway network has a number of traffic roundabouts at the following intersections: • • • • • •

Taradale Road Pakowhai Road Evenden Road Omahu Road Flaxmere Road Longlands Road.

With the exception of the last roundabout at Longlands Road, all the other crossings appear to be suitable for the long loads. Some road furniture and street lights will need to be removed to avoid any collisions. At Pakowhai Road, major road modifications are presently underway.

10

Photo 9 â&#x20AC;&#x201C; Longlands Roundabout

The roundabout at Longlands Road, has a very sharp left turn and the long loads will not negotiate this. Light poles and signage will also restrict access. The alternative is to cross over to the wrong side, heading South and use this lane to negotiate the roundabout.

The aerial photo below from Google, shows the sharp left turn heading South on SH 50A. Crossing over makes it easier for the long loads. This can be managed by the load escort pilots with the load.

Photo 10 â&#x20AC;&#x201C; Aerial photo of Longlands Road roundabout with arrows indicating wrong side access for long loads

11

2.4.6

SH 50A to SH 2 south

This intersection also has a large roundabout, and this will require some attention for the long loads to negotiate.

Photo 11 â&#x20AC;&#x201C; Entrance to SH50A and SH 2 roundabout

Photo 12 â&#x20AC;&#x201C; view of route from north around SH50A and SH 2 roundabout (note signage and light pole on outside edge)

12

Photo 13 â&#x20AC;&#x201C; view heading south from SH50A and SH 2 roundabout (note signage and light pole on inside corner)

2.4.7

SH 2 Waipakurau

The SH 2 Highway passes through the Central Hawkes Bay town of Waipakurau. All heavy traffic is required to use the local road bypass, to avoid the main town centre. At the time of this report, the bypass road was closed with major remedial works.

The roads used to bypass SH 2 are Peel Street and The Esplanade, when driving South from Napier. These are wide arterial roads, however the inside left corner with light pole, shown in the photo below, will need to be clear to allow the long loads to pass.

Photo 14 â&#x20AC;&#x201C; Peel St bypass Waipakurau, view heading south, note light pole.

13

2.4.8

SH 2 – Norsewood bypass

There is an over-bridge on SH 2 linking the Township of Norsewood. This is a significant obstacle of SH 2 in both directions and affects all OD loads. The bridge has a clearance of 4.80 metres but does have a bypass, as shown in the photographs below.

Photo 15 and 16 – Norsewood bypass south and fence that can be removed at top of bypass to allow access back onto SH 2 once passed the over-bridge

2.4.9

SH 2 – Woodville

The SH 2 Highway passes through the township of Woodville and then South to Pahiatua.

There is a heavy traffic bypass to avoid the main shopping area of the town.

The bypass to SH 2 - Tay Street, Station Road and back onto SH 2 south.

Photos 17 and 18 – Left turn off SH 2 into Tay Street, Woodville. Some widening of the grass verger area may to required to allow access for long loads. Street signs can be removed

14

Photos 19 and 20 â&#x20AC;&#x201C; Right turn from Tay Street to Station Road in Woodville. Good clearance but note fence on

Photos 21 and 22 â&#x20AC;&#x201C; Left turn from Station Road back onto SH 2, note street light on outside of the corners that will need removing for long loads. Street signs that will need removal

2.4.10

Pahiatua Township

From Woodville, SH 2continues South to the township of Pahiatua. There are no problems with the road network until the right turn in the centre of the township, onto Pahiatua Mangahao Road. See photos 23 and 24 - this intersection will require reshaping, to allow the long loads to access and turn right.

15

Photo 23 â&#x20AC;&#x201C; right turn off SH 2 onto Pahiatua Mangahao Road. Note Islands, street signs and trees

Photo 24 â&#x20AC;&#x201C; another view of right turn off SH 2 to Pahiatua Mangahao Road

At this intersection, the centre islands will need to be modified to allow the long loads to pass through; some trees and street signs will also need to be removed.

16

2.4.11

Pahiatua Mangahao Road to site.

0.8km

Photo 25 -Arch Bridge, 6.1metres wide curb to curb 2.4km

Photo 26 -Right hand bend with Rail Crossing

17

4.4km

Photos 27 and 28 - Sharp left turn with good clearance and ample room for long loads

6.5km

Photos 29 and 30 - Left turn off bridge onto Makomako Road, high railings on outside of turn and light pole on inside will need relocating

18

9.0km

Sharp left turn all ok

Photo 31 -Reverse angle photo of left hand corner. Use of all the shoulder for long loads

17.1km Left turn on Pahiatua Aokatere Road.

Photo 32

19

18.1kmm to 18.5km to site Entrance 1

Photo 33 and 34 - This is left hand bend with immediate right turn and will need to be plotted out for long loads to pass through. Bank on inside will be to close for long loads

Photo 35 and 36 - Inside bank at approx. 18.5km will be a problem. Approx. site Entrance 1 at 18.6km 18.7km

Photo 37 and 38 - 25km right turn very sharp and immediate left turn which will be tight on inside and need to be plotted for the long loads to access

20

Photos 39 and 40 20.3km Approx. Site entrance 2

Photo 41

21

3.0

PORT FACILITIES

The Port of Napier is the best option for receiving all the equipment for the project. The alternatives of Wellington and New Plymouth have more restrictions in terms of large over-dimensional loads being handled.

Napier has previously handled Wind Farm equipment for the Te Apiti and Tararua 1 projects. The Port is a major hub for export of timber and seasonal fruit, and has limited space for large quantities of specialised over-dimensional freight. The Port can supply additional storage away from the main Port location, and whist this is not the best scenario, it may be the best option for consideration.

Two storage yards in Thames Street, approx. 4.3km from the main Port area, can be made available by the Port for the project. Access to these yards is restrictive and the long blade loads would be best remaining on the Port area proper, whilst other loads such as Towers, Hubs and Nacelles could be stored in these areas. Additional transport will be required to assist the ships discharge and handling of the cargo to be stored off the Port area.

Photo 42 and 43 - showing access to Port Storage facilities on Thames Street

Restrictions negotiating both the roundabouts at Hydrabad Road and the turn into Thames Street, off Pandora Road, will mean long blade loads should remain within the Port area.

There is an alternative that can be used via Prebensen Drive, Severn Street and Thames Street, to avoid the roundabout at Hydrabad/Pandora. There are two further roundabouts on Prebensen Drive to negotiate access to be considered.

In summary, provided the blade units can remain on the Port for storage, any or all of the other components could be stored in the Thames Street sites.

22

Photo 44 - Route map from Port of Napier to Thames Street Storage areas

23

4.0

OVERHEAD POWER COMPANIES

The standard height for all loads on the highway network in New Zealand, is 4.25metres off the ground. Loads that exceed this height, will require an approval from the local lines companies to ensure they have clearance.

A number of the loads detailed in this project, will exceed the 4.25metres when loaded for travel and therefore will require a permit approval.

There are a number of local lines companies namely: Unison Networks Ltd Scan Power Ltd Central Lines Ltd Powerco Ltd Chorus Network These companies generally allow loads up to 5.4metres in height, to travel with a permit and without the need for an additional escort to supervise the clearance under the wires, across the network. The tower sections are all over-height and could be subject to an escort from the Lines Companies, depending on the trailer configuration used. There will be costs associated with these services provided. Discussions prior to the project commencing, could assist with the network being reviewed and wire heights checked, and potentially raised prior to haulage starting.

Need to approach power companies and allow for assistance to overdimension loads; 1st time for tower sections then allow to elevate wires at road crossings

5.0

CONCLUSIONS

This report makes the following conclusions: • • • • • •

All loads can be hauled from the Port of Napier to site at Turitea.

The Port at Napier has capacity and space to handle the proposed cargo loads for the project; this includes some offsite storage facilities.

The approved route for the heavy loads, is as detailed in the feasibility permit issued by NZTA and supported by the local councils.

There is a need to have temporary works done on the route, to remove road furniture and traffic signals.

All overhead Lines Companies will need to be involved in the consultation process, to gain approval for all high loads over the complete route.

A simulated drive over the route by a trailer, proposed for the Blade transport, is recommended in conjunction with the Suppliers to review and identify correctly the problem areas. Details mapping of the long loads on the affected corners and roads will also be required.

24

Appendix 1

25

26

27

28

29

30

31

32

33

Appendix 2

34

Appendix D: TMP: Pahiatua-Aokautere Road Widening

Downer New Zealand Limited

www.downergroup.co.nz

Page 46 of 46