Mediquip Emergency Catalogue

Page 1

Emergency

PRODUCTCATALOGUE

We exist to enhance our partners’ provision of patient care by delivering quality solutions, helping efficiency and supporting patient safety.

• Equipment, consumables, service and support, driven by technological advantage

• Australia-wide sales support and technical specialists

• Over 35 years’ supporting the healthcare industry

Australia-wide 1300 246 349

admin@mediquip.com.au

PRACTI MEDICATIONS 3

PATIENT MONITORS

- Portable Ultrasound 3

- Patient Monitors 4

- Pulse Oximeters 6

- Sphygmomanometers 6 - ECG Machines 6

DEFIBRILLATORS 7

ANALGESIC ADMINISTRATION

- Analgesic Administration System 8 - Spare Parts / Resucitation Equipment 8

ANAESTHETICS 9

MEDICAL GAS EQUIPMENT

- Regulators 10

- Spare Parts / Regulators 11

- Flowmeters - Premium 12

- Flowmeters - Dial Type (Premium) 13 - Flowmeters - Dial Type (Standard) 13

- Spare Parts / Flowmeters 14

- Humidifiers 14

- Twin O Vac 14

- Spare Parts / Twin O Vac 15

- Suction Attachments (Premium) 15

- Suction Attachments (Standard) 16

- Spare Parts / Suction Attachments 16 - Suction Regulators 16

- Spare Parts / Suction Regulators 16

RESUSCITATION

- Oxy Viva Resuscitator 17

- Demand Valve Resuscitator 17

- Softpack Resuscitators 17

- Softpack Bags 18

- Single Use CPAP System 19

- B.I.G. IO Bone Gun 19

- Disposible Resuscitators 19

SUCTION PUMPS 20

CONSUMABLES

- Masks, Tubes 21 - Pink Absorbent Underpads 21 - Disposable Liner Suction System 22

MEDICAL ENGINEERING

- 3 Way Adaptors (Premium) 23 - 3 Way Adaptors (Standard) ..................... 23 - Wall Outlets 23 - Wall Plates 23 - Wall Boxes 24 - Manifold 24 - Handwheel Kits 25 - Hoses 25 - Medical Gas Tubing 26 - Hospital Grade Silicone Tubing 26

TROLLEYS & BRACKETS

Stainless Steel Trolleys 27 - Anaesthesia Trolleys 28 - Cylinder Trolleys & Brackets 28

STERILISERS / O2 CONCENTRATORS 29

- Kronos ‘S’ Class Sterilisers 29 - Oxygen Concentrators 29

MEDICAL FURNITURE ......................... 30 - Drug Safes 30 - Treatment / Examination Couches 30

X-RAY VIEWERS 31

DISCLAIMER: Please note that prices and availability are correct at the time of publishing but may be subject to change without notice. While we try ensure accuracy, Mediquip is not responsible for any typographic or photographic errors in this catalogue. Images and descriptors shown are indicative only and may vary from actual product ordered.

2
CONTENTS

WALLCUR PRACTICE MEDICATIONS

PRACTI-POWDER, PRACTI-VIALS, PRACTI-PEEL-N-STICK LABELS, AND PRACTI-ORAL MEDS

Wallcur’s Practi-Products™ guarantee the highest quality, most true-to-life realistic designs for the best hands-on medical training. As the originator of practice medication for simulation, Wallcur’s products allow instructors to create a safe and authentic training experience that is easily integrated into any new or existing curriculum. Wallcur’s extensive practice product range represents most relevant and current simulation training products and delivery systems currently available.

PHILIPS LUMIFY ULTRASOUND

EXCEPTIONAL PORTABLE ULTRASOUND FROM YOUR SMART DEVICE

Philips Lumify is a high-quality portable ultrasound which can be used almost anywhere. All that’s required is the Lumify app and a plug-in transducer, and you’re set. The ultrasound images offer incredible quality thanks to Philips’ decades of expertise and innovation, and being displayed on a smart device offers a multitude of sharing and multitasking benefits with the quick and easy ability to send images, video and notes to your colleagues both by email and across shared networks. The app is available either by purchase or subscription, and needs to be downloaded to your smart device.

It enables healthcare professionals to meet patients at the point-of-care, wherever that may be, make faster diagnosis and ultimately deliver care whenever it’s needed.

3 PRACTI MEDICATIONS

PATIENT MONITORS PATIENT MONITORS

MINDRAY VS600 VITAL SIGNS MONITOR

The Mindray VS600 Vital Signs Monitor is a compact, light vital signs patient monitor featuring an integrated high-performance battery and integrated carrying handle, making it ideally suited for mobile vital signs monitoring. Innovative, affordable, and easy-to-use it enables medical professionals to take accurate measurements of patient vitals such as heart rate, blood pressure, and body temperature. The function keys and well-thought-out design make it very easy to use and the clear, bright display can be read easily from some distance away. With an optional temperature module available on some models, the VS600 is high-precision, all-in-one solution for continuous, interval, and spot check monitoring.

• Screen size: 5.7”

• To monitor NIPB (non-invasive blood pressure), SpO2, pulse rate, and optional temperature

• Suitable for adults, children, and newborn infants

• Battery or mains operated

• Operating life with battery approximately 22 hours

• Perfusion index display

• With an integrated carrying handle for easy transport

• Dimensions: 24.3W x 13.4H x 12D cm

• Available in three models item no: UMVS600 manu: MindRay

• Technical support 24/7

• Comprehensive digital records at your fingertips

• Servicing, maintenance programs, validation

• Highly qualified technicians and engineers

4
trusted partner for biomedical equipment service & repair solutions.
Your

BIONET PATIENT MONITORS

5 PATIENT MONITORS
patient monitors represent affordable quality in patient monitoring systems.
units feature
available. Other features include user customisable displays and
pulse oximetry. standardfeaturesinclude:
High-performance Suntech NiBP
Bionet
All
SuntechNiBPwhichhasbeenuniversityproventobethemostaccurateNiBP
Nellcor
Low perfusion SpO2 measurement using Nelcor technology
Multiple display modes
120 hours of trend data are stored
Li-ion battery allows cordless use for up to 1 hour
Individual sweep speed setting for each parameter extendableparameters:
Anaesthetic Module
BIZ monitoring
Cardiac Output • Mainstream/Sidestream CO2 • 12Ch ECG measurement module WALL SWIVEL MOUNT FOR BM3, BM5, BM7 item no: BTAFWM AVAILABLE NOW with anaesthetic & BIZ(COmonitoring 2, O2, N2O & Agent) BM5 MONITOR item no: BTHBM5 BM7 MONITOR item no: BTHBM7 BM3 MONITOR item no: BTHBM3 MODEL SP02 NIBP TEMP* ECG RESP IBP* CO2 READY* MULTIGAS* BM3 ✔ ✔ ✔ ✔ ✔ BM5 ✔ ✔ ✔ x2 ✔ ✔ ✔ x2 ✔ BM7 ✔ ✔ ✔ x2 ✔ ✔ ✔ x2 ✔ ✔ MODEL SCREEN WEIGHT SIZE USB DOWNLOAD BM3 7” Colour TFT 3.1 Kg 238 X 250 X 163mm BM5 10.4” Colour TFT 4 Kg 270 X 250 X 185mm BM7 12.1” Colour TFT 4.5 Kg 322 x 250 x 224.8mm ✔ NOTE: * Cable / Probe not included

PATIENT MONITORS

MONITOR STAND WITH BASKET

This Roll Stand with Basket is designed for various patient monitors with horizontal mounting surfaces.

• Easy height adjustment

• Multi-purpose utility basket

• Stable and easy-roll twin casters

• Two lockable casters to secure stand in place

item no: BAIMS003

item no: TR1006 - BM1 Adaptor Plate item no: BAIMS003B - Roll stand with mounting bracket suitable for BM3, BM5 and BM7

PULSE OXIMETERS

OXY9 WAVE SP02 MONITOR

• 3.2” colour TFT LCD Display

• Vertical and horizontal display

• Nellcor compatibility

• 100-240V

• Lithium battery

• Weighs: 300g

• Size: 45H x 210W x 75D mm

• Comes with: Finger sensor, Ac adaptor, Pole mount bracket item no: BTHOXY9 manu: Bionet

FINGER TIP PULSE OXIMETER

• Weight: 28g without batteries

• Display: SPO2, PR, Pulse Bar & Plethysmogram

• Batteries: 2x AAA alkaline/rechargeable item no: MPPOFCMS50C

SPHYGMOMANOMETERS

SPHYGMOMANOMETER, DIGITAL, SELF-INFLATING item no: MPSDDS157

SPHYGMOMANOMETER, ERKA SWITCH, ANEROID item no: MPES293DB

SPHYGMOMANOMETER, VARIO, WITH MOBILE STAND

Available in Light, Medium & Heavy Bases item no: MPEV288MM

ECG MACHINES

Free network software available to convert ECGs to PDF, ready to attach to Medical Director or Best Practice.

CARDIOCARE 2000

• Cost-effective 12 channel resting ECG

• 2 lines text LCD screen

• Low maintenance cost with normal fax paper

• Easy to operate via numeric keyboard

• 12Ch resting ECG with 120 types of diagnosis

• Accurate interpretation with advanced Minnesota code

item no: BTHCC2000 manu: Bionet

CARDIO 7 ECG

• 12 channel interpretive ECG

• Wide and clear colour LCD (800x x480)

• Touch screen for easy operation

• One touch operation (monitoring, recording mode)

• 12Ch simultaneous display

• Memory for up to 120 patients

• Real time preview monitor

item no: BTHC7000 manu: Bionet

6

ECG CART FOR CARDIO 7

item no: BTA038400 manu: Bionet

ECG CABLE HANGER FOR CARDIO 7

item no: BTA038300 manu: Bionet

ECG CART, HEIGHT ADJUSTABLE

• Modular table top

• Grip front handle

• Utility bin with removable dividers

• Noiseless and easy roll twin casters

item no: BAECGD1

DEFIBRILLATORS

ZOLL AD PLUS PORTABLE DEFIBRILLATOR

The AD Plus smart defibrillator supports rescuers with real-time audio-prompts about the rate and depth of chest compressions. Recommended by medical professionals, its ‘Real CPR Help’ technology guides rescuers to perform high-quality CPR with its integrated audio and visual feedback capabilities.

• Rugged design with an IP55 rating for dust and water

• Withstands extreme temperature, altitude, vibration, and shock conditions

• Off-the-shelf lithium batteries with a 5-year battery life

• Optional paediatric electrodes can be purchased separately for children up to 8 years old or weighing less than 25kg

• Automatic self-testing helps ensure a state of readiness

• Soft carry case for easy travel

• 5-year warranty (7-year with online registration)

item no: MZ800300

ZOLL X SERIES HOSPITAL TRANSPORT DEFIBRILLATOR

Small, light and durable, the X Series is the optimal device for the transport of critically ill patients. With pacing, advanced monitoring features and CPR feedback in one compact device it includes:.

• Capnography

• Pulse oximetry

• Three invasive pressures

• Two temperature channels

• Non-invasive blood pressure

• 12-lead capabilities

item no: MZ800760

7 DEFIBRILLATORS

ANALGESIC ADMINISTRATION SYSTEM

COMWELD ENTONOX REGULATOR, DEMAND VALVE & HOSE

• Demand Flowrate: 0-160 l/min

• Supply Pressure: 400 kPa nominal

• Inlet Connection: 5/8” - 18 UN

• Patient Connection: 22/15mm male/female taper

• Gas: Entonox (50% Nitrous Oxide/50% Oxygen)

item no: CIG550010 manu: O-Two/Comweld

O-TWO ENTONOX REGULATOR, DEMAND VALVE & HOSE

item no: CIG550010-1 manu: O-Two

ENTONOX DEMAND VALVE & HOSE

• Demand Flowrate: 0-160 l/min

• Supply Pressure: 400 kPa nominal

• Inlet Connection: 5/8” - 18 UN

• Patient Connection: 22/15mm male/female taper

• Gas: Entonox (50% Nitrous Oxide/50% Oxygen)

item no: CIG550011 manu: O-Two

ENTONOX DEMAND HEAD

For use with Disposable Circuit. Note that the regulator and circuit are not included.

item no: CIG550011-2 manu: O-Two

ENTONOX REGULATOR, MINING INDUSTRY APPROVED

• Inlet Connection: 5/8” – 18 UN

• Patient Connection: 22/15 mm male/female taper

item no: OTRENT manu: O-Two

SPARE PARTS / RESUSCITATION EQUIPMENT

MASK, RESUSCITATION, ADULT SIZE 5

item no: CIG515743 manu: Comweld

MASK, RESUSCITATION, CHILD SIZE 3

item no: CIG515744 manu: Comweld

BODOK SEAL

item no: CIG551022 manu: Comweld

OXI-VAC SUCTION SYSTEM

item no: MDIS-OV-00

ASPIRATOR JAR

item no: MDJAR

DIAPHRAGM VALVE, DEMAND VALVE

item no: OT552082 manu: O-Two

PATIENT VALVE, DEMAND

item no: OT552083 manu: O-Two

HOSE ASSY, OXYGEN, SIS TO DISS

item no: CIG552086 manu: Comweld ............................................................................

EQUINOX II 90 DEG SCAV ADAPTOR

item no: OT552084 manu: O-Two

ENTONOX HOSE ASSY, SIS TO DISS

item no: CIG552087

NON RE-BREATHING VALVE CAP ASSY

item no: OT552085

8
ANALGESIC ADMINISTRATION

O-TWO eADVANTAGE

ELECTRONIC NITROUS OXIDE/OXYGEN ANALGESIC GAS MIXING AND DELIVERING SYSTEM

The O-Two eAdvantage® is an electronically controlled, gas pressure operated, self-administered mixing system for the delivery of a variable concentration of a gaseous mixture of Nitrous Oxide and Oxygen (N2O/O2), on demand flow to spontaneously breathing, conscious patients via a unique patient circuit with monitoring line. It utilizes variable flow control and measurement to deliver accurate concentrations of N2O/O2 from pressurized and regulated gas supplies (either cylinder or pipeline) at flow rates equivalent to that demanded by the patient, or by Continuous, selectable flow rates.

• Powered using mains supply or battery

• Regulated gas supplied from cylinders and pipelines

• Maximum flow rate >260 l/min combined or 160 from oxygen input only

• Oxygen concentration 25-100 % continuous adjustment with 5%incremental changes.

Accuracy: ±5% V@ min. fl ow rate of 15 L/min. (+5%V/-3% V for 30% O2)

• Two year warranty against manufacturers defects

O-TWO eADVANTAGE

item no: OTEQ3000 DISPOSABLE CIRCUIT WITH MOUTHPIECE AND MONITORING LINE item no: FLC038-01-173/1

ANAESTHETICS

AIRWAY, DISPOSABLE, #000 item no: ISG1000

AIRWAY, DISPOSABLE, #00 item no: ISG1100

AIRWAY, DISPOSABLE, #0 item no: ISG1110

.....................................................................................................

AIRWAY, DISPOSABLE, # 1 item no: ISG1111

AIRWAY, DISPOSABLE, # 2 item no: ISG1112

AIRWAY, DISPOSABLE, # 3 item no: ISG1113

AIRWAY, DISPOSABLE, # 4 item no: ISG1114

TUBE, CLEAR, 22MM, 400MM CUFF item no: ISG1574

NASOPHARYNGEAL AIRWAYS

The NPA is a disposable airway adjunct used to maintain patient airways. Soft PVC construction and a beveled tip enable comfortable & gentle insertion to minimise the chance of complications.

With inner striations for smooth suction catheter insertion, it is available in a choice of 7, 8 and 9mm sizes.

item no: TCP007 item no: TCP008 item no: TCP009

9 ANAESTHETICS

MEDICAL GAS EQUIPMENT REGULATORS

SERIES O REGULATOR - OXYGEN

• Inlet Connection: Pin Indexed Yoke

• Outlet Connection: SIS Sleeve

• Max Outlet Pressure: 400kPa

• Max Inlet Pressure: 20,000kPa@15oC

item no: CIG518804 manu: Comweld

OXYGEN REGULATOR YOKE WITH OUTLET

• Piston Regulator

• Inlet Connection: Pin Indexed Yoke

• Outlet Connection: SIS Sleeve

• Max Outlet Pressure: 400kPa

• Max Inlet Pressure: 20,000kPa

item no: CIG551193 manu: Comweld

REGULATOR/FLOWMETER, 0-25L/MIN

• Piston Style Combination Regulator/Flowmeter

• 0-25 l/min Flowrates

• Brass Construction - Aluminium Free

• Inlet Connection: Pin Indexed Yoke

• Outlet Connection: Barbed Nipple

• Max Inlet Pressure: 20,000kPa

item no: OTR025 manu: O-Two

REGULATOR/FLOWMETER WITH 2 OUTLETS, 0-25L/MIN

• Piston Style Combination Regulator/Flowmeter

• 0-25 l/min Flowrates

• Inlet Connection: Pin Indexed Yoke

• Outlet Connection: Barbed Nipple & 2x SIS Sleeve

• Max Outlet Pressure: 400kPa

• Max Inlet Pressure: 20,000kPa

item no: CIG551189 manu: Comweld

REGULATOR/FLOWMETER, 0-15 L/MIN

• Piston Style Combination Regulator/Flowmeter

• 0-15 l/min Flowrates

• Aluminium Construction

• Inlet Connection: Pin Indexed Yoke

• Outlet Connection: Barbed Nipple

• Max Inlet Pressure: 20,000kPa

item no: OTR015A manu: O-Two

10

SPARE PARTS / REGULATORS

BODOK SEAL

item no: CIG551022 manu: Comweld

SINTERED FILTER, SERIES O REGULATOR

item no: CIG551024 manu: Comweld

REPAIR KIT, REGULATOR SERIES O

item no: CIG519026 manu: Comweld

KEYWHEEL, CYLINDER

item no: CIG511956 manu: Comweld

CYLINDER SPANNER

item no: CIG551162 manu: Comweld

SPARE GAUGE, OXYGEN, REGULATOR

• 0 - 30,000 Kpa scale

• 1/4 BSP Male Connection

item no: CIG551045 manu: Comweld

SPARE GAUGE, MEDICAL AIR, REGULATOR

• 0 - 30,000 Kpa scale

• 1/4 BSP Male Connection

item no: CIG551044 manu: Comweld

SPARE GAUGE, NITROUS OXIDE, REGULATOR

• 1/4 BSP Male Connection

item no: CIG551043 manu: Comweld

WING SCREW FOR SERIES O REGULATOR

item no: CIG551029 manu: Comweld

WING SCREW FOR MULTE-FLOW REGULATOR

item no: CIG551166 manu: Comweld

GAUGE FOR MULTE-FLOW REGULATOR

item no: CIG551169 manu: Comweld

LOW PROFILE GAUGE FOR OXYGEN REGULATOR

item no: AXSPG manu: Amvex

11 MEDICAL GAS EQUIPMENT

MEDICAL GAS EQUIPMENT

FLOWMETERS - PREMIUM

EZI FLOW FLOWMETER, OXYGEN, 0-15 L/MIN

• Flow Rate: 0-15 l/min

• Inlet Pressure: 400kPa

• Inlet Connection: SIS Oxygen Handwheel

• Outlet Connection: Barbed Nipple or 1/4” BSP

item no: CIG515800 manu: Comweld

EZI FLOW FLOWMETER, MEDICAL AIR, 0-15 L/MIN

• Flow Rate: 0-15 l/min

• Inlet Pressure: 400kPa

• Inlet Connection: SIS Medical Air Handwheel

• Outlet Connection: Barbed Nipple or 1/4” BSP

item no: CIG515820 manu: Comweld

EZI FLOW FLOWMETER, OXYGEN, 0-2.5

• Flow Rate: 0-2.5 l/min

• Inlet Pressure: 400kPa

• Inlet Connection: SIS Oxygen Handwheel

• Outlet Connection: Barbed Nipple or 1/4” BSP

item no: CIG515824 manu: Comweld ............................................................................

FLOWMETER, OXYGEN, 0-200MLS

• Flow Rate: 0-200 mls/min

• Inlet Pressure: 400kPa

• Inlet Connection: SIS Oxygen Handwheel

• Outlet Connection: Barbed Nipple or DISS

item no: AXFM3500 manu: Amvex

FLOWMETER, OXYGEN, 0-1 L/MIN

• Flow Rate: 0-1 l/min

• Inlet Pressure: 400kPa

• Inlet Connection: SIS Oxygen Handwheel

• Outlet Connection: Barbed Nipple or DISS

item no: AXFM3300 manu: Amvex

DOUBLE FLOWMETER, “Y”, OXYGEN

• Dual “Y” Configuration

• Flow rate: 0-15 l/min

• Inlet pressure: 400kPa

• Inlet Connection: SIS Oxygen Handwheel

• Outlet Connection: Barbed Nipple or 1/4 “ BSP

item no: PAG0219

FLOWMETER, OXYGEN, GAUGE TYPE

• Flow Rate: 0-15 l/min

• Inlet Pressure: 400kPa

• Inlet Connection: SIS Oxygen Handwheel

• Outlet Connection: Barbed Nipple or 1/4” BSP

item no: CIGTM17 manu: Comweld

FLOWMETER, OXYGEN, 5-30 LPM

item no: PAG8803 manu: Gascon

FLOWMETER, OXYGEN, 0-70 LPM

item no: AXFM0184

FLOWMETER, MEDICAL AIR, 0-70LPM

item no: AXFM0185

12

FLOWMETERS - DIAL TYPE (PREMIUM)

OXYGEN FLOWMETER, DIAL TYPE, 0-1 L/MIN

• Flow Settings: 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8 & 1.0 l/min

• Outlet Connection: ¼” BSP or Barbed Nipple item no: PAG8707

OXYGEN FLOWMETER, DIAL TYPE, 0-5 L/MIN

• Flow Settings: 0, 0.5, 0.8, 1, 1.5, 2,2.5, 3, 4 & 5 l/min

• Outlet Connection: ¼” BSP or Barbed Nipple item no: PAG8706

OXYGEN FLOWMETER, DIAL TYPE, 0-15 L/MIN

• Flow Settings: 0, 1, 2, 3, 4, 5, 6, 9, 12 & 15 l/min

• Outlet Connection: ¼” BSP or Barbed Nipple item no: PAG8705

OXYGEN FLOWMETER, DIAL TYPE, 0-25 L/MIN

• Flow Settings: 0, 0.5, 1, 2, 3, 4, 6, 8, 15 & 25 l/min

• Outlet Connection: ¼” BSP or Barbed Nipple item no: PAG8709 ...................................................................................................

OXYGEN FLOWMETER, DIAL TYPE, 0-50 L/MIN

• Flow Settings: 5, 10, 15, 20, 25, 30, 35, 40 & 50 l/min

• Outlet Connection: ¼” BSP or Barbed Nipple item no: PAG8708

MEDICAL AIR FLOWMETER, DIAL TYPE, 0-50 L/MIN

• Flow Settings: 5, 10, 15, 20, 25, 30, 35, 40 & 50 l/min

• Outlet Connection: ¼” BSP or Barbed Nipple item no: PAG8895

FLOWMETERS - DIAL TYPE (STANDARD)

OXYGEN FLOWMETER, DIAL TYPE, 0-4 L/MIN

• Flow Rate: 0-4 l/min

• Increments: .03, .06, .12, .25, .5, .75, 1, 1.5, 2, 3, 4

• Outlet Connection: Barbed Nipple or DISS

item no: AXFD04 manu: Amvex

OXYGEN FLOWMETER, DIAL TYPE, 0-8 L/MIN

• Flow Rate: 0-8 l/min

• Increments: .5, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 7, 8

• Outlet Connection: Barbed Nipple or DISS

item no: AXFD08 manu: Amvex

OXYGEN FLOWMETER, DIAL TYPE, 0-15 L/MIN

• Flow Rate: 0-15 l/min

• Increments: .5, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15

• Outlet Connection: Barbed Nipple or DISS item no: AXFD15 manu: Amvex

13 MEDICAL GAS EQUIPMENT
WE SELL GENTEC STYLE TOO

MEDICAL GAS EQUIPMENT

SPARE PARTS / FLOWMETERS

NIPPLE, FLOWMETER, OXYGEN

item no: CIG515830 uom: Pkt 10/Each manu: Comweld ....................................................

NIPPLE, FLOWMETER, MEDICAL AIR

item no: CIG515849 uom: Pkt 10/Each manu: Comweld

FLOWMETER NIPPLE, DISS, WHITE

item no: AXFNPL manu: Amvex

FLOWMETER ADAPTOR

• Female 1/4 BSP to Male DISS item no: TYDW002

HUMIDIFIERS

HUMIDIFIER, OXYGEN THERAPY

item no: CIGTM11 manu: Comweld

HUMIDIFIER, OXYGEN THERAPY, DISPOSABLE - PREMIUM

item no: KA3232

HUMIDIFIER, OXYGEN THERAPY, STANDARD item no: KA7171

TWIN O VAC

TWIN O VAC WITH GAUGE

• Inlet Pressure: 400kPa

• Gauge Range: 0 to -100 kPa

• Inlet Connection: SIS Oxygen Handwheel

• Outlet Connection: SIS Sleeve item no: CIGTM117G manu: Comweld

TWIN O VAC WITH GAUGE, LOW SUCTION

• Inlet Pressure: 400kPa

• Gauge Range: 0 to -25 kPa

• Inlet Connection: SIS Oxygen Handwheel

• Outlet Connection: SIS Sleeve item no: CIG518632 manu: Comweld

MEDICAL GAS INSTALLATIONS

• Design & Consultancy

• Medical Vacuum Plants

• Anaesthetic Gas Scavenging

• Gas Alarm Systems

14
has undertaken the design, installation and commissioning of Medical Gas Systems for more than 30 years. Our experience is second to none and crosses a broad range of disciplines.
Mediquip
Pipeline Installation
Medical Gas Manifolds
Systems
andgetitdonerightthefirsttime.
Oxygen Separation Plants Whetheryou’rebuilding,renovatingorexpanding,contactMediquip

SPARE PARTS / TWIN O VAC

BACTERIA FILTER, TWIN

O VAC

item no: CIG554050 uom: Pkt 25/Pkt 100 manu: Comweld

JAR, TWIN O VAC, 400ML

item no: CIG554024 manu: Comweld ............................................................................

JAR, TWIN O VAC, 200ML item no: CIGM1244 manu: Comweld

GAUGE, TWIN

O VAC 0 TO -100 KPA

item no: WIK9472622 manu: Comweld

GAUGE, TWIN O VAC 0 TO -25 KPA

item no: WIK9808752 manu: Comweld

SEAL KIT, TWIN O VAC

item no: CIG515754 manu: Comweld

FILTER RETAINER KIT, TWIN O VAC item no: CIG515753 manu: Comweld

SUCTION ATTACHMENTS - PREMIUM

SUCTION ATTACHMENT, CENTRAL VACUUM WITH GAUGE

• Gauge Range: 0 to -100 kPa

• Inlet Connection: SIS Vacuum Handwheel

• Outlet Connection: Nozzle to suit 8mm ID Tubing item no: CIG554006 manu: Comweld

SUCTION ATTACHMENT, CENTRAL VACUUM WITHOUT GAUGE

• Inlet Connection: SIS Vacuum Handwheel

• Outlet Connection: Nozzle to suit 8mm ID Tubing item no: CIG554007 manu: Comweld

SUCTION ATTACHMENT, VENTURI SUCTION WITH GAUGE

• Gauge Range: 0 to -100 kPa

• Inlet Connection: SIS Vacuum Handwheel

• Outlet Connection: Nozzle to suit 8mm ID Tubing item no: CIG554013 manu: Comweld

SUCTION ATTACHMENT, VENTURI SUCTION WITHOUT GAUGE

• Inlet Connection: SIS Vacuum Handwheel

• Outlet Connection: Nozzle to suit 8mm ID Tubing item no: CIG554010 manu: Comweld

SUCTION ATTACHMENT, VENTURI SUCTION WITH GAUGE, LOW SUCTION

• Gauge Range: 0 to -25 kPa

• Inlet Connection: SIS Vacuum Handwheel

• Outlet Connection: Nozzle to suit 8mm ID Tubing item no: CIG518535 manu: Comweld

15 SUCTION ATTACHMENTS

SUCTION ATTACHMENTS

SUCTION ATTACHMENTS – STANDARD

STANDARD SUCTION ATTACHMENT, CENTRAL VACUUM WITH GAUGE

• Gauge Range: 0 to -100 kPa

• Inlet Connection: SIS Vacuum Handwheel

• Outlet Connection: Nozzle to suit 8mm ID Tubing item no: SHA554006

STANDARD SUCTION ATTACHMENT, CENTRAL VACUUM WITHOUT GAUGE

• Inlet Connection: SIS Vacuum Handwheel

• Outlet Connection: Nozzle to suit 8mm ID Tubing item no: SHA554007

STANDARD SUCTION ATTACHMENT, VENTURI SUCTION WITH GAUGE

• Gauge Range: 0 to -100 kPa

• Inlet Connection: SIS Vacuum Handwheel

• Outlet Connection: Nozzle to suit 8mm ID Tubing item no: SHA554013

STANDARD SUCTION ATTACHMENT, VENTURI SUCTION WITHOUT GAUGE

• Inlet Connection: SIS Vacuum Handwheel

• Outlet Connection: Nozzle to suit 8mm ID Tubing item no: SHA554010

SPARE PARTS / SUCTION ATTACHMENTS

FILTER, SINTERED FOR SUCTION ATTACHMENT

item no: CIGWA185 manu: Comweld

NOZZLE, YELLOW, FOR SUCTION ATTACHMENT item no: CIG518634 manu: Comweld

O’RING NEOPRENE item no: ZPN110 ......................................................................................................

SUCTION REGULATORS

2 MODE, LOW SUCTION REG WITH NOZZLE

• 0-25 kPa, 1-160mmHg

• Outlet Connection: Nozzle to suit 8mm ID Tubing item no: AXSR2LYN manu: Amvex

2 MODE, LOW SUCTION REG WITH TRAP JAR

• 0-25 kPa, 1-160mmHg

• Trap Jar assembly with over flow safety

• Outlet Connection: Nozzle to suit 8mm ID Tubing

item no: AXSR2LYTJ manu: Amvex

3 MODE, HIGH SUCTION REG WITH NOZZLE

• 0-100 kPa, 0-700mmHg

• Outlet Connection: Nozzle to suit 8mm ID Tubing

item no: AXSR3HYN manu: Amvex

3 MODE, HIGH SUCTION REG WITH TRAP JAR

• 0-100 kPa, 0-700mmHg

• Trap Jar assembly with over flow safety

• Outlet Connection: Nozzle to suit 8mm ID Tubing

item no: AXSR3HYTJ manu: Amvex

SUCTION REG, NEONATE, DIGITAL

• 0-15 kPa, 0-100mmHg

• Outlet Connection: Nozzle to suit 8mm ID Tubing item no: AXSR2NDN manu: Amvex

16

OXY VIVA RESUSCITATOR

OXY VIVA 3, RESUSCITATOR

• Oxygen Demand Valve Resuscitator provides resuscitation flowrate of 40-60 l/min and a demand flowrate of 1-160 l/min

• Suction attachment provides static vacuum of 60 kPa (-150mmHg) and a suction flow of 40 l/min free air minimum. With a 250ml trap jar and a nipple to suit 8mm suction tubing

• Weighs approximately 6.5kg

• Dimensions 57W x 18D x 30H cm

• Cylinder not included

item no: CIG552090 manu: Comweld

DEMAND VALVE RESUSCITATOR

VALVE, DEMAND RESUSCITATOR

• Manual Flowrate: 40-60 l/min

• Demand Flowrate: 0-160 l/min

• Supply Pressure: 400 kPa nominal

• Inlet Connection: 9/16” - 18 DISS

• Patient Connection: 22/15mm male/female taper item no: CIG552095 manu: O-Two

SOFTPACK RESUSCITATORS

All Mediquip Softpack Resuscitators are built to last. They use solid brass regulators manufactured by O-Two in Canada and the bags are constructed of water resistant nylon material. The premium version uses a high quality ‘Ripstop’ material for greater water protection. These are the standard resuscitators used by the QLD Fire Service for over 4 years.

PREMIUM OXYGEN THERAPY KIT

• Oxy Softpack Bag

• Solid Brass Regulator and Adult and Child Therapy Masks

item no: MQ552162….. Premium Ripstop Softpack Bag item no: MQ552162S… Standard Nylon Softpack Bag ........................................................

OXY SOFTPACK RESUSCITATOR KIT (WITH DEFIBRILLATOR)

• Softpack Bag with Solid Brass Regulator and Therapy Masks

• Disposable Adult and Child Resuscitators

• Disposable Airways Sizes 1-4

• Samaritan PAD350 Automatic Defibrillator (DF version only)

item no: MQ552159 Premium Ripstop Softpack Bag item no: MQ552159S Standard Nylon Softpack Bag item no: MQ552159DF Premium Ripstop Softpack Bag and Defibrillator

OXY SOFTPACK M7 RESUSCITATOR KIT (WITH DEFIBRILLATOR)

• Larger M7 Premium Ripstop Softpack Bag

• Brass Regulator and Therapy Masks

• Reusable Adult and Child Resuscitators

• Disposable Airways Sizes 1-4

item no: MQ552158 (no defibrillator) item no: MQ552158DF with Samaritan PAD350 Automatic Defibrillator

17 RESUSCITATION

OXY SOFTPACK M7 RESUSCITATOR KIT WITH ASPIRATOR (AND DEFIBRILLATOR)

• Larger M7 Ripstop Softpack Bag

• Brass Regulator and Therapy Masks

• Reusable Adult and Child Resuscitators

• Disposable Airways Sizes 1-4

• Gas powered aspirator

• Samaritan PAD350 Automatic Defibrillator (DF version only)

item no: MQ552170 (no defibrillator)

item no: MQ552170DF with Samaritan PAD350 Automatic Defibrillator

OXY SOFTPACK M7 RESUSCITATOR KIT WITH DEMAND RESUSCITATOR, ASPIRATOR (& DEFIB)

• Larger M7 Ripstop Softpack Bag

• Brass Regulator and Therapy Masks

• Gas powered Demand Resuscitator Head

• Disposable Airways Sizes 1-4

• Gas powered aspirator

• Samaritan PAD350 Automatic Defibrillator (DF version only)

item no: MQ552175

item no: MQ552170DF with Samaritan PAD350 Automatic Defibrillator

OXY SOFTPACK FIRE M6 RESUSCITATOR KIT

• Larger/Higher M6 Premium Ripstop Softpack Bag

• Brass Regulator and Therapy Masks

• Disposable Adult and Child Resuscitators

• Disposable Airways Sizes 1-4

• Gas powered aspirator

item no: MQ552180

SOFTPACK BAGS

STANDARD OXY SOFTPACK BAG, EMPTY

• Red vinyl exterior (water resistant)

• Carry straps, yellow vinyl reflective strip

item no: QMM4BGT

PREMIUM OXY SOFTPACK BAG, EMPTY

• Red Ristop exterior (water resistant), red nylon interior

• With velcro on module, carry straps, white reflective strip item no: QMM4V

OXY SOFTPACK BAG, M7, EMPTY

• Red 100d nylon exterior, red nylon interior

• With shoulder harness, carry straps, white reflective strip, internal and external compartments

item no: QMM7

DOCTORS BAG, EMPTY

item no: QMMDR

OXY SOFTPACK BAG, M6, EMPTY

• Red Ripstop Exterior (water resistant), red nylon interior

• Carry Straps and white reflective strip item no: QMM6V ......................................................................................................

bags can be ordered in a range of colours on request.

18 RESUSCITATION
QUEENSLAND FIRE SERVICE USED BY

SINGLE USE CPAP SYSTEM

Single-Use Open Circuit CPAP Delivery System. Award winning, compact,“low flow” non-invasive ventilation for the respiratory distressed patient. A luer port is located on the device to attach a pressure gauge. However, the accuracy of the CPAP level at the fixed-flow settings noted on the device makes the use of a gauge unnecessary.

The ambient air intake port and the location of the in-line oxygen hose are designed to eliminate the possibility of accidental occlusion, removing the risk of barotrauma due to the patient or rescuer inadvertently blocking the port.

Ideal for the treatment of the respiratory impaired patient suffering from a range of obstructive pulmonary diseases, the O-Two CPAP system is a simple, cost-effective alternative to invasive ventilation and possible intensive care admissions.

This Single-Use CPAP System is used by the Queensland Ambulance Service. To view a full CPAP demonstration, watch this QAS video: https://www.youtube.com/watch?v=poRPeaf-EMI

O-TWO CPAP WITH LARGE ADULT MASK

item no: OTR01CV0211 manu: O-Two Medical

(SIZE 5)

O-TWO CPAP WITH SMALL ADULT MASK (SIZE 4)

item no: OTR01CV0212 manu: O-Two Medical

O-TWO CPAP WITH CHILD MASK (SIZE 3)

item no: OTR01CV0213 manu: O-Two Medical

B.I.G. IO BONE GUN

B.I.G. BONE INJECTION GUN

• Compact size, light weight, always ready to deploy

• Automated Insertion in 0.02 Second, virtually painless

• Dial up, multiple sight insertion for penetration depth:

• Tibia, Humerus, Radius, Malleolus

• Extra needle safety for user

• No power or cleaning issues

• Five year shelf life

• Sterile and single Use item no: AHBIGA - Adult item no: AHBIGP - Paediatric ......................................................................................

NIO BONE GUN

• Sterile and single use

• User friendly

• No exposed needle

• Pocket size and lightweight

• Vascular access in 10 seconds

• Five year shelf life

item no: AHNIO-A - Adult item no: AHNIO-P - Paediatric

DISPOSABLE RESUSCITATORS

ADULT DISPOSABLE RESUSCITATOR

item no: BE2501

PAEDIATRIC DISPOSABLE RESUSCITATOR

item no: BE2601

19 RESUSCITATION

SUCTION PUMPS

CHEIRON SUCTION PUMPS

VICTORIA PORTABLE

Quiet and effective suction unit for medical practices, wards and endoscopic applications. Suitable for fast suction in any situation.

specifications:

• Receiver: Reuseable or Disposable

• Flow: 43LPM

• Vacuum: 0-90Kpa

• Dimensions: 440W x 300H × 310L mm

• Weight (without accessories): 12kg

item no: CHV1112R Reusable cannister, electronic suction unit

item no: CHV1112V Disposable cannister, electronic suction unit

DYNAMIC II SUCTION UNITS

The Dynamic II Suction Pumps are a compact modern medical device for efficient suction, suitable for wards and ICUs as well as for homecare. A double piston oil-free vacuum pump guarantees a dynamic suction output (20 l/min) and it´s completely maintenance free. By using the suction regulator it´s possible to control the vacuum level in the range of 0-80 kPa.

• Suitable for hospital and home-care use

• Designed for short-term suction

• Continuous vacuum adjustment

• Intensity of vacuum indicated on gauge

• Antibacterial filter is connected with suction circuit

• 230V power supply

• Suction output 20L/min

• Maintenance free operation

• Available with reusable or disposable jar

• Dimensions: 310W x 240H x 190L mm

• Weight: 4.3 kg (Dynamic II)

• Weight 4.9kg (Dynamic II with battery)

item no: CHV1210R Dynamic II, Reusable Canister

item no: CHV1210V Dynamic II, Disposable Canister

item no: CHV1215R Dynamic II Battery, Reusable Canister

item no: CHV1215V Dynamic II Battery, Disposable Canister

20

CONSUMABLES

CONNECTOR TUBE, LINKETT

item no: DAVM663 uom: Pkt 10

CONNECTOR TUBE, LINKETT, SWIVEL item no: EVM663S uom: Pkt 10

NASAL CANNULA WITH 1.8M TUBING item no: ISG1161

BACTERIA FILTER WITH SAMPLE PORT

item no: ISG1544

MASK, OXYGEN THERAPY, ADULT item no: SA1624

MASK, OXYGEN THERAPY, CHILD item no: SA1626

MASK/TUBE 2M, OXYGEN, ADULT item no: SA1625

MASK/TUBE 2M, OXYGEN, CHILD item no: SA1627

MASK, HIGH OXYGEN, ADULT WITH TUBING item no: MP3675

MASK, HIGH OXYGEN, CHILD WITH TUBING item no: MP3674

SUCTION TUBING, 2M, STERILE item no: MH2614MHC

CATHETER, Y SUCTION - FG10, FG12, FG14 item no: MSC11010 / MSC11012 / MSC11014

PINK ABSORBENT UNDERPADS

PINK ABSORBENT UNDERPADS, LARGE

• 1800mm x 600mm

• Absorbs 4 litres of fluid

item no: SMACB001 uom: Box 24

PINK ABSORBENT UNDERPADS, MEDIUM

• 900mm x 600mm

• Absorbs 2 litres of fluid item no: SMABC002 uom: Box 50

PINK ABSORBENT UNDERPADS, SMALL

• 600mm x 600mm

• Absorbs 1.5 litres of fluid item no: SMABC003 uom: Box 80

21 CONSUMABLES

CONSUMABLES

DISPOSABLE LINER SUCTION SYSTEM

VACSAX 1 LITRE CANNISTER

item no: PCV3833-134

VACSAX 2 LITRE CANNISTER

item no: PCV3833-098

VACSAX 3 LITRE CANNISTER

item no: PCV3833-138

VACSAX LINER 1 LITRE

item no: PCV9910-340 uom: Box 25

VACSAX LINER 2 LITRE item no: PCVAL-201 uom: Box 30

VACSAX LINER 3 LITRE

item no: PCV9910-342 uom: Box 20

PIPELINE PROTECTOR

item no: PC9510-100

MUNKTELL STERIFILTER

item no: PCS84100162

BLUE CONNECTOR FOR FILTER, MALE

item no: PCSUC84200519

BLUE CONNECTOR FOR FILTER, FEMALE item no: PCSUC84200520

VACSAX TAPERED CONNECTOR

item no: PCV3833-007

VACSAX WALL BRACKET, PARALLEL

item no: PCV3858-002

VACSAX WALL BRACKET, STAINLESS STEEL

item no: PCVBJ-02

VACSAX MEDIRAIL BRACKET

item no: PCV1300-MR

22
All Vacsax products are Antimicrobial BactiClear Systems EXTERNAL SURFACES ANTIMICROBIAL

3 WAY ADAPTORS - PREMIUM

ADAPTOR, 3 WAY, OXYGEN

item no: CIG551140

ADAPTOR, 3 WAY, MEDICAL AIR item no: CIG551141

ADAPTOR, 3 WAY, SUCTION item no: PAG0163-SUCT

ADAPTOR, 3 WAY, ‘Y’ CONFIGURATION, ANY GAS item no: PAG0188

3 WAY ADAPTORS – STANDARD

ADAPTOR, 3 WAY, OXYGEN ‘T’ CONFIGURATION

item no: SHA551140

ADAPTOR, 3 WAY, OXYGEN, ‘Y’ CONFIGURATION

item no: SHA551140Y

ADAPTOR, 3 WAY MEDICAL AIR, ‘T’ CONFIGURATION item no: SHA551141

ADAPTOR, 3 WAY, MEDICAL AIR , ‘Y’ CONFIGURATION item no: SHA551141Y

WALL OUTLETS

OXYGEN OUTLET, MK3, SCREW

item no: CIG553040 manu: Comweld

MEDICAL AIR OUTLET, MK3, SCREW

item no: CIG553041 manu: Comweld

NITROUS OXIDE OUTLET, MK3, SCREW

item no: CIG553042 manu: Comweld

DIRECT SUCTION OUTLET, MK3, SCREW

item no: CIG553043 manu: Comweld

VENTURI SUCTION OUTLET, MK3, SCREW item no: CIG553044 manu: Comweld

DIRECT SCAVENGE OUTLET, MK3, SCREW

item no: CIG553045 manu: Comweld

VENTURI SCAVENGE OUTLET, MK3, SCREW

item no: CIG553046 manu: Comweld

SURGICAL TOOLS OUTLET, MK3, SCREW

item no: CIG553047 manu: Comweld

WALL PLATES

PANEL, 1 GANG

• Single Outlet stainless steel wall plate

• 145 x 110mm item no: HZD5001

23 MEDICAL ENGINEERING

MEDICAL ENGINEERING

PANEL, 2 GANG & 3 GANG

• Dual Outlet and Triple Outlet stainless steel wall plate

• 145H x 220W mm / 145H x 330W mm

item no: HZD5002 / HZD5003

BACKING PLATE, 1 GANG & 2 GANG

• Single Outlet suitable for mounting HZD5001, Dual Outlet suitable for mounting HZD5002

• 145H x 127W mm / 145H x 237W mm

item no: HZD5006 / HZD5007

NOTE: Other sizes are available on request

WALL BOXES

BOX, SURFACE MOUNT, 1 GANG

• Surface mounting single outlet wall boxes to suit HZD5001

• 145W x 115H x 75D mm

item no: HZD5101SMP

BOX, SURFACE MOUNT, 2 GANG

• Dual outlet wall boxes to suit HZD5001 and HZD5002

• 225W x 150H x 75D mm

item no: HZD5102SMP

BOX, SURFACE MOUNT, 3 GANG

• Wall Box, Dual Outlet, for mounting HZD5003

item no: HZD5103SMP

CYLINDER RESTRAINT, WALL, LARGE

item no: TRBOTTLE-RES

NOTE: Other sizes are available on request

LINE ISOLATION VALVE ASSEMBLY

Allows the connection of two oxygen cylinders to your pipeline through isolation valves thus allowing you to always have a backup on standby.

item no: HZDDVI

item no: HZDDVIS (includes shuttle valve)

MEDICAL AUTO CHANGE-OVER MANIFOLD

The MM800 range of auto change-over medical gas manifolds is a compact supply system for installations requiring an uninterrupted high flow capacity.

The manifold consists of two banks of cylinders, one on each side of the pressure control assembly. The position of the lever determines which bank of cylinders is ‘in use’ and which is ‘in reserve’.

The manifold draws gas from the ‘in use’ cylinder bank until it is emptied. The manifold then automatically starts drawing gas from the ‘in reserve’ cylinder bank. When the emptied cylinder bank has been replaced the lever should be moved to the other side to reset the manifold.

The complete system specification incorporates all the features and components required by a medical gas system as detailed in AS2896, (Medical gas systems).

• AS2896 Compliant

• Duplex line relief valves

• Change-over and line failure pressure switches

• Change-over and line failure test point bleed valves

• Gas specific auxiliary/service supply inlet

• Mounting plate

• Modular inlet header system for system expansion

• Optional standby regulator unit

• Australian made

Available in the following Gas and Supply Sources:

24
GAS SUPPLY SOURCE AIR (Air) 1x1 1 cylinder x 1 cylinder
(Carbogen) 2x2 2 cylinders x 2 cylinders
(Carbon Dioxide) 3x3 3 cylinders x 3 cylinders
4x4 4 cylinders x 4 cylinders
5x5 5 cylinders x 5 cylinders
Oxide) 1Px1P
CARB
CO2
ENT (Entonox)
OXY (Oxygen)
N20 (Nitrous
1 manpack x 1 manpack

HANDWHEEL KITS

HANDWHEEL KIT, MEDICAL AIR

• 5mm nipple, 12mm ferrule

item no: CIG518405

HANDWHEEL KIT, OXYGEN

• 5mm nipple, 12mm ferrule item no: CIG518406

HANDWHEEL KIT, NITROUS OXIDE

• 8mm nipple, 14mm ferrule item no: CIG518407

HANDWHEEL KIT, SUCTION

• 8mm nipple, 14mm ferrule

item no: PAG2032-SUCT

HANDWHEEL KIT, SCAVENGE

• 6mm nipple, 14mm ferrule item no: PAG2032-SCAV

HANDWHEEL KIT, CARBON DIOXIDE

• 6mm nipple, 14mm ferrule item no: PAG2032-CO2

HANDWHEEL KIT, CARBOGEN

• 6mm nipple, 14mm ferrule item no: PAG2032-CARB

HANDWHEEL KIT, ENTONOX

• 6mm nipple, 14mm ferrule item no: PAG2032-ENT

HANDWHEEL KIT, SURGICAL TOOL

• 8mm nipple, 14mm ferrule item no: PAG2032-SURG

HOSES

OXYGEN HOSE, 1M, SIS TO SIS item no: AXHA010SS

OXYGEN HOSE, 3M, SIS TO SIS item no: AXHA030SS

OXYGEN HOSE, 5M, SIS TO SIS item no: AXHA050SS

OXYGEN HOSE, 10M, SIS TO SIS item no: AXHA0100SS

NITROUS OXIDE HOSE, 1M, SIS TO SIS

item no: AXHAN2010SS

NITROUS OXIDE HOSE, 3M, SIS TO SIS

item no: AXHAN2030SS

NITROUS OXIDE HOSE, 5M, SIS TO SIS item no: AXHAN2050SS

NITROUS OXIDE HOSE, 10M, SIS TO SIS item no: AXHAN20100SS

NOTE: Hosing can be made to any length/configuration upon request

MEDICAL AIR HOSE, 1M, SIS TO SIS item no: AXHAAIR010SS

MEDICAL AIR HOSE, 3M, SIS TO SIS item no: AXHAAIR030SS

MEDICAL AIR HOSE, 5M, SIS TO SIS item no: AXHAAIR050SS

MEDICAL AIR HOSE, 10M, SIS TO SIS item no: AXHAAIR0100SS

SUCTION HOSE, 1M, SIS TO SIS item no: AXHASUCT10SS

SUCTION HOSE, 3M, SIS TO SIS item no: AXHASUCT30SS

SUCTION HOSE, 5M, SIS TO SIS item no: AXHASUCT50SS

SUCTION HOSE, 10M, SIS TO SIS item no: AXHASUCT100SS

25 MEDICAL ENGINEERING

MEDICAL GAS TUBING

GREEN OXYGEN THERAPY TUBE, 5MM ID

item no: DAWYR62 uom: Metre / 30M Roll

WHITE OXYGEN HOSE, 5MM ID

item no: DAW518403 uom: Metre / 50M Roll

YELLOW SUCTION HOSE, PVC 8MM ID

item no: DAW518401 uom: Metre / 50M Roll

YELLOW SUCTION HOSE, SILICONE 6MM ID

item no: LUD524299 uom: Metre / 25M Roll

BLACK AIR HOSE, 5MM ID

item no: DAW518402 uom: Metre / 50M Roll

BLUE NITROUS OXIDE HOSE, 8MM ID

item no: DAW518404 uom: Metre / 50M Roll

CORRUGATED SCAVENGE TUBE, 22MM ID

item no: DAW512004 uom: Metre / 30M Roll

TURBINE TOOL HOSE, 8MM ID

item no: DAW518407 uom: Metre

C02 TUBING, 6MM ID

item no: DAW518405 uom: Metre

ENTONOX HOSE, 6MM ID

item no: DAW518406 uom: Metre

1/4” WAGD EVAC HOSE

item no: AXHS01UWC4 uom: Metre

NOTE: Other sizes are available on request

HOSPITAL GRADE SILICONE TUBING

Translucent

JHS16318 1.6 3.2

JHS26488 2.6 4.9

JHS32635 3.2 6.4

JHS48794 4.8 7.9

JHS48953 4.8 9.5

JHS64953 6.4 9.5

JHS64111 6.4 11.1

JHS64127 6.4 12.7

JHS71119 7.1 11.9

JHS79127 7.9 12.7

JHS79143 7.9 14.3

JHS95143 9.5 14.3

JHS95159 9.5 15.9

JHS10150 10 15

JHS13175 12.7 17.5

JHS13191 12.7 19.1

JHS16222 15.9 22.2

26
MEDICAL ENGINEERING
individually sealed
packaged
hospital tubing supplied in
and
15 metre coils.
INSIDE DIA (MM)
DIA
ITEM NUMBER
OUTSIDE
(MM)

STAINLESS STEEL TROLLEYS

STAINLESS STEEL TROLLEY

• 49W x 49D x 90H cm

• No Drawers

• 100mm Castors

item no: TM1450

STAINLESS STEEL TROLLEY

• 80W x 50D x 90H cm

• No Drawers

• 100mm Castors

item no: TM1450.8

STAINLESS STEEL TROLLEY

• 49W x 49D x 90H cm

• Single drawer

• 100mm Castors

item no: TM1451

STAINLESS STEEL TROLLEY

• 50W x 50D x 90H cm

• Double Drawer

• 100mm Castors

item no: TM1453

STAINLESS STEEL TROLLEY

• 50W x 50D x 90H cm

• Triple Drawer

• 100mm Castors

item no: TM1456

STAINLESS STEEL TROLLEY

• 80W x 50D x 90H cm

• Double 1/2 Drawer

• 100mm Castors

item no: TM1452

STAINLESS STEEL TROLLEY

• 80W x 50D x 90H cm

• Four 1/2 Drawer

• 100mm castors

item no: TM1454

IV STAND

This IV Stand is designed specifically to safely manage multiple blood warmers, pumps, and syringe drivers while allowing you to configure the IV stand to best meet your exact requirements. The lowcentre-of-gravity design of the 5-legged aluminium base creates more stable mobility.

• Easy height adjustment

• Stable and easy-roll twin casters

• Two lockable casters to secure stand in place

item no: BAIVS52

item no: BAIVS54

27 TROLLEYS & BRACKETS

TROLLEYS & BRACKETS

ANAESTHESIA TROLLEYS

EMERGENCY TROLLEY

• 9 modules

• DRAWER SIZE: 417x470mm

• LOAD CAPACITY: 45kg each drawer

• Frontal full width handle with label holder and coloured tag ID

• Drawers on ball-bearing rails

• Self-closing system

• Safety lock system

• Numeric disposable breakable red plastic seals (100pcs included)

• Worktop in ABS moulded plastic with anti-drop rim

• 2 transparent tilt-out bins, removable for cleaning

• Shelf for vacuum pump

item no: PCPL60C5

MULTIFUNCTION TROLLEYS

• 9 modules

• DRAWER SIZE: 610x470mm

• LOAD CAPACITY: 300kg

• Frontal full width handle with label holder and coloured tag ID

• Drawers on ball-bearing rails

• Self-closing system

• Central key or electronic lock system for all drawers

• Work top in ABS moulded plastic with anti-drop rim

• Ergonomic push-handle on 3 sides with rounded edges

• 3 transparent tilt-out bins, removable for cleaning

• Back-side with built-in catheter/probes holder and storage space

• Wheel brakes

• OPTIONAL ACCESSORIES: glove box holder, draw dividers, patient chart holders, defib. tray, IV pole, basket instrument hook, instrument disinfectant basin

Mount item no: CMP524125

item no: GRE515623

28
TROLLEYS & BRACKETS BRACKET S/STEEL “C” CYLINDER
CYLINDER
Rail
BRACKET FOR “C” CYLINDER, HEAVY DUTY S/STEEL
Surface
........................................................................................... BRACKET FOR “D” CYLINDER, HEAVY DUTY S/STEEL
Mount item no: AWWMM00001
TROLLEY FOR “C” OR “D” CYLINDER
Surface Mount item no: AWWMM00003

KRONOS ‘S’ CLASS STERILISERS

Available with18 or 23 Litre capacity, the Kronos ‘S’ Sterilisers feature an instantaneous vaporiser outside the chamber, allowing faster sterilisation speeds and reduced water consumption. features:

• Pre and Post Vacuum with double stage vacuum pump

• Motor Operated Closure

• Instantaneous Vaporiser

• Printer

• Graphic Display

• Connection to PC

• Double loading tank and water drainage

• Moulded stainless steel one-piece chamber

• Memory Test System

Wrapped Sterilisable Weight In Kg 3 4.5

Unwrapped Sterilisable Weight In Kg 4 6

Tray Size 285x180 440x185

Empty Machine In Weight In Kg 45 50

Outer Measurement (mm) 610Dx445Wx400H 695Dx445Wx400H

Supply Voltage 220-240V 220-240V Mains Frequency 50-60 Hz 50-60 Hz Rated Power 2400W 2400W

item no: MDMKRONOS18S, Kronos Steriliser, 18L, S Class, with Printer item no: MDMKRONOS23S, Kronos Steriliser, 23L, S Class with Printer

OXYGEN CONCENTRATORS

VISIONAIRE OXYGEN CONCENTRATOR 0-5 LPM

• Oxygen Settings: 0.5 – 5 L/min

• Power: 220-240 Volts

• Weight: 13.6kg

• Dimensions: 52.8H x 35.8W x 29.2D cm

• Sound Level: 40 dBA

• Power Consumption: 175 Watts item no: AS098-3 manu: Airsep

EVERFLO OXYGEN CONCENTRATOR 0-5 LPM

• Oxygen Settings: 0.5 – 5 L/min

• Power: 220-240 Volts

• Weight: 14kg

• Dimensions: 58H x 38W x 24D cm

• Sound Level: <43 dBA

• Power Consumption: 350 Watts item no: RS1020010 manu: Philips

NEWLIFE INTENSITY OXYGEN CONCENTRATOR 0-8 LPM

• Dual Flowmeters enabling dual set up

• Oxygen Settings: 01 – 8 L/min

• Power: 220-240 Volts

• Weight: 24.5kg

• Dimensions: 69.9H x 41.9W x 36.8D cm

• Power Consumption: 410 Watts item no: AS094-10 manu: Airsep

29 STERILISERS / O2 CONCENTRATORS
TECHNICAL SPECIFICATIONS 18 LITRE 23 LITRE Chamber Volume In Litres 18 23 No. Of Cycles With Water Loading (Indicative) 10 8

MEDICAL FURNITURE

DRUG SAFES

THREE SHELVES

• 3 removable shelves

• 305W x 180D x 457H mm

item no: TM1620

FOUR SHELVES

• 4 removable shelves

• 457W x 180D x 610H MM

item no: TM1622

TREATMENT / EXAMINATION COUCHES

• Electric Height Adjustment with footswitch

• X-Frame Lift action minimises pinch and crush points

• Available with either adjustable feet or castors

• Durable powder coated rust resistant frame

• High quality anti-microbial vinyl & CFC free foam

• Available in a wide range of colours

• 5 year warranty on frame & electrics

• Australian designed & manufactured

• 250kg Maximum Lifting Capacity (moving)

• 400kg Maximum Working Load (stationary)

GP EXAMINATION TABLE

• 450mm Minimum Height

• 950mm Maximum Height

• 710mm Table Width

• 1930mm Table Length

• Manual backrest adjustment +70º (electric upgrade available)

item no: HC53120T-7 with Adjustable Feet / HC53121T-7 with Castors / HC53121T-7-EB with Electric Backrest & Castors

TREATMENT TABLE, 2 SECTION

• 450mm Minimum Height

• 950mm Maximum Height

• 610mm Table Width

• 1840mm Table Length

• Manual Headrest adjustment +40º to -90º

• Nose Hole with plug in headrest as standard

item no: HC53020T-6 with Adjustable Feet / HC53021T-6 with Castors

TREATMENT TABLE, 3 SECTION

• 450mm Minimum Height

• 950mm Maximum Height

• 610mm Table Width

• 1820mm Table Length

• Manual Headrest adjustment +40º to -90º

• Manual Leg Rest Adjustment +70º

• Nose Hole with plug in headrest as standard

item no: HC53030T-6 with Adjustable Feet / HC53031T-6 with Castors

GP UNIVERSAL EXAMINATION TABLE

• 450mm Minimum Height

• 950mm Maximum Height

• 710mm Table Width

• 1930mm Table Length

• Manual backrest adjustment +70º (Both end sections)

item no: HC53220T-7 with Adjustable Feet / HC53221T-7 with Castors

30

X-RAY VIEWERS

With a high intensity aluminium-alloy frame and steel plated joints the viewers are extremely durable plus the polymethyl methacrylate plate screen minimises any visual distortion. The screen clips out on hinges for ease of use when the illumination tubes require replacement or repair.

• 1 metre power cord

• Easy grip film attachment for all sides

• Can be wall mounted or free standing

• Hinged screen allows easy access when wall mounted

SINGLE BAY

• Screen size: 36W x 44H cm

• Total unit size: 44W x 58H x10D cm

• Light source 15w fluro vertical tubes (4) item no: MIG300-004

DOUBLE BAY

• Screen size: 72W x 44H cm

• Total unit size: 80W x 58H x 10D cm item no: MIG300-005

TRIPLE BAY

• Screen size: 108W x 44H cm

• Total unit size: 117W x 58H x 10D cm

• Light source 15w fluro vertical tubes (9) item no: MIG300-006

QUAD BAY

• Screen size: 143W x 44H cm

• Total unit size: 152W x 63H x 10D cm

• Light source 15w fluro vertical tubes (12) item no: MIG300-007 ................................

MEDIQUIP SERVICE DEPARTMENT

ItisvitalthatBiomedicalEquipmentistestedonaregularbasistomaintainAustralian Standardsandmanufacturerspecifications. Regular testing provides both the user and patient with confidence, knowing that the equipment being used is safe and will provide accurate information from which safe diagnosis can be derived. With a second to none reputation for service excellence Mediquip technicians provide preventative maintenance and breakdown repairs on almost any type of biomedical equipment.

• Highly qualified technical team - maintenance and repair is completed by a qualified Biomedical Technician

• Service department can be contacted 24/7

• Servicing can be undertaken at the customer’s premises

• Prompt repairs

• Our team work to Australian Quality standards

MEDICAL ASSET ADMINISTRATION SYSTEM

Mediquip provide customers access to MAAS (our Medical Asset Administration System) - an online, paperless database that retains a complete history of your medical equipment.

• Better management of your equipment inventory

• Stores details, service, repair and parts history

• Traceability of test equipment used by Mediquip

• Online service reporting available 24/7

• Provides lifecycle analysis for every asset

• Live status of equipment currently being repaired

• Completely paperless

• Perfect tool for Quality Assurance and Australian Council of Healthcare Standards.

31
SERVICE
MQ_EMER_1122
FORFURTHERINFORMATION Callus: Australia-wide 1300 246 349 Visitourwebsite: www.mediquip.com.au Emailus: admin@mediquip.com.au Offices in Brisbane, Sydney, Melbourne, Adelaide, Perth

Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.