®
®
PREMIUM LUG BOLTS & NUTS
OUR LUG BOLTS
TABLE OF CONTENT
CHROME PLATING
STEEL
The best in the industry. Our process includes several layers of nickel and one layer of microporous chrome. The layers of nickel are for corrosion resistance, luster and interaction with the microporous chrome layer to disperse nature’s corrosive action (rust).
Our stringent standards ensure the structural integrity of each and every McGard lug bolt.
FLOATING SEAT The floating seat design provides precision control of the torque tension characteristics between the fastener and wheel hub assembly.
IDENTIFICATION
THROUGH-HARDENED STEEL
We roll mark our name into the surface of every lug bolt. This is your assurance that you are getting genuine McGard quality and safety.
Every lug bolt is through-hardened and tempered, reaching the depth of hardness needed for its unsurpassed level of safety (unlike case hardening which is only a surface treatment).
PRECISE BEARING SURFACE
PRECISION COATED THREADS
McGard’s floating seat design allows for precision concentricity of the bearing surface to the pitch diameter. This ensures even distribution of the clamp load and uniform seating of the lug bolt to the wheel hub assembly.
Core integrity provides the highest strength in the industry. McGard lug bolts exceed the highest O.E.M. proof load and tensile load standards. The unique process of applying multiple proprietary coatings helps prevent seized or difficult to remove lug bolts.
OUR LUG NUTS
OUR PRODUCTS
2
Product features
2
Lug Bolts Cone Seat 60° Radius Seat Customized Wheel Installation Box
5 6 7
Lug Nuts Wheel Installation Kits Cone Seat 60° Cone Seat 60° Shank Style Drag Racing Spline Drive
8 9 10 11 12-13
IMPORTANT TECHNICAL INFORMATION Choosing the correct Lug Bolt
14
Bolt application verification
15
Nut application verification
16-17
Application Guide
18-19
IDENTIFICATION In addition to the thread size and part number, we roll mark our name into the surface of every Tough Nut. This is your assurance that you are getting McGard quality and safety.
THROUGH-HARDENED STEEL We use only restricted chemistry steel made specifically for McGard. These special standards ensure the structural integrity of each and every fully machined McGard wheel lock and lug nut. Every fastener is through-hardened and tempered, reaching the depth of hardness needed for its unsurpassed level of security (unlike case hardening which is only a surface treatment).
CHROME PLATING The best in the industry. Our process includes several layers of nickel and one layer of microporous chrome. The layers of nickel are for corrosion resistance, luster and interaction with the microporous chrome layer to disperse nature’s corrosive action (rust).
PRECISION THREAD Core integrity and precision machining provide the highest strength in the industry. All McGard locks and lug nuts meet or exceed the highest O.E.M. proof load standards, 135,000 to 160,000 PSI.
PRECISE BEARING SURFACE McGard’s standard for concentricity of the bearing surface to the pitch diameter is 30% more precise than O.E.M. standards. This ensures even distribution of the clamp load and uniform seating of the wheel lock and lug nut to the wheel.
2
3
LUG BOLTS
LUG BOLTS - CONE SEAT 60° THREAD SIZE
OEM design, security, aesthetics, precision, and long life. Our lug bolts are fitted with a separate washer and present the optimal fit for precision functioning. The lug bolts surpass even the high quality safety and durability requirements of the automotive industry. Available in chrome or black finish coating, the lug bolts upgrade the visual appeal of every rim, and therefore your vehicle.
SHANK LENGTH S
TOTAL LENGTH
HEX SIZE
M12x1.25
22.0 mm
50.5 mm
17 mm
M12x1.25
25.6 mm
57.6 mm
17 mm
M12x1.25
29.0 mm
57.6 mm
17 mm
M12x1.5
25.5 mm
54.1 mm
17 mm
THREAD SIZE
SHANK LENGTH S
TOTAL LENGTH
HEX SIZE
M14x1.25
27.4 mm
54.2 mm
17 mm
M14x1.25
32.4 mm
59.2 mm
17 mm
M14x1.25
37.4 mm
64.2 mm
17 mm
M14x1.25
42.4 mm
69.2 mm
17 mm
M14x1.25
47.4 mm
74.2 mm
17 mm
THREAD SIZE
SHANK LENGTH S
TOTAL LENGTH
HEX SIZE
COLOUR
WHEEL INSTALLATION KIT incl. 16 Lug bolts, 4 wheel locks and 1 key Part No.
BOX/50
Part No.
chrome
67216SU
69716SU
black
67216SUB
69716SUB
chrome
67261SU
69761SU
black
67261SUB
69761SUB
chrome
67215SU
69715SU
black
67215SUB
69715SUB
chrome
67179SU
69779SU
black
67179SUB
69779SUB
COLOUR
WHEEL INSTALLATION KIT incl. 16 Lug bolts, 4 wheel locks and 1 key Part No.
BOX/50
FLOATING SEAT
MCGARD LUG BOLT
S
Part No.
chrome
67226SU
69726SU
black
67226SUB
69726SUB
chrome
67228SU
69728SU
black
67228SUB
69728SUB
chrome
67229SU
69729SU
black
67229SUB
69729SUB
chrome
67230SU
69730SU
black
67230SUB
69730SUB
chrome
67231SU
69731SU
black
67231SUB
69731SUB
COLOUR
WHEEL INSTALLATION KIT incl. 16 Lug bolts, 4 wheel locks and 1 key Part No.
BOX/50
FLOATING SEAT
MCGARD LUG BOLT
S
When choosing the proper lug bolt check for: Correct thread size
Cone or Radius style seating surface
Shank length is not too short or too long Detailed technical information please see page 14-15.
NOTE: During wheel installation, bolt shank length must be checked for proper fit. Too short of a shank will result in lack of engagement and an unsafe condition. Too long of a shank can extend beyond the hub assembly and possibly cause damage to other vehicle parts. 4
M14x1.5
28.0 mm
57.5 mm
17 mm
M14x1.5
30.5 mm
57.5 mm
17 mm
M14x1.5
39.0 mm
69.3 mm
17 mm
M14x1.5
44.0 mm
73.9 mm
17 mm
M14x1.5
49.0 mm
76.0 mm
17 mm
Part No.
chrome
67222SU
69722SU
black
67222SUB
69722SUB
chrome
67205SU
69705SU
black
67205SUB
69705SUB
chrome
67242SU
69780SU
black
67242SUB
69780SUB
chrome
67243SU
69781SU
black
67243SUB
69781SUB
chrome
67246SU
69782SU
black
67246SUB
69782SUB
5
FLOATING SEAT
MCGARD LUG BOLT
S
LUG BOLTS - RADIUS SEAT RADIUS SEAT - R13 THREAD SIZE
SHANK LENGTH S
TOTAL LENGTH
HEX SIZE
M14x1.5
26.7 mm
51.4 mm
17 mm
M14x1.5
32.4 mm
57.5 mm
17 mm
M14x1.5
36.7 mm
66.8 mm
17 mm
M14x1.5
41.7 mm
66.8 mm
17 mm
M14x1.5
46.7 mm
73.9 mm
17 mm
COLOUR
WHEEL INSTALLATION KIT incl. 16 Lug bolts, 4 wheel locks and 1 key Part No.
BOX/50
Part No.
chrome
68018SU
69818SU
black
68018SUB
69818SUB
chrome
68058SU
69878SU
black
68058SUB
69878SUB
chrome
68059SU
69879SU
black
68059SUB
69879SUB
chrome
68060SU
69880SU
black
68060SUB
69880SUB
chrome
68061SU
69881SU
black
68061SUB
69881SUB
COLOUR
WHEEL INSTALLATION KIT incl. 16 Lug bolts, 4 wheel locks and 1 key Part No.
BOX/50
FLOATING SEAT
MCGARD LUG BOLT
S
CUSTOMIZED WHEEL INSTALLATION BOX
RADIUS SEAT - R14 THREAD SIZE
M14x1.5 M14x1.5 M14x1.5
SHANK LENGTH S
27.5 mm 35.4 mm 45.0 mm
TOTAL LENGTH
51.4 mm 59.2 mm 73.9 mm
HEX SIZE
17 mm 17 mm 17 mm
You want to upgrade the appearance of your wheel rim and search for something special and unique? McGard offers the possibility to laser engrave lug bolts and lug nuts with your initials or the logo of your choice.
FLOATING SEAT Part No.
chrome
68174SU
69874SU
black
68174SUB
69874SUB
chrome
68044SU
69844SU
black
68044SUB
69844SUB
chrome
68053SU
69876SU
black
68053SUB
69876SUB
COLOUR
WHEEL INSTALLATION KIT incl. 16 Lug bolts, 4 wheel locks and 1 key Part No.
BOX/50
MCGARD LUG BOLT
S Unique, individual, special The personalized wheel installation box consists of 20 lug bolts, 4 locking bolts and 2 keys. The complete set comes in a beautiful luxury wooden box.
RADIUS SEAT - R14 THREAD SIZE
M14x1.5
SHANK LENGTH S
28.3 mm
TOTAL LENGTH
57.5 mm
HEX SIZE
17 mm
M14x1.5
40.0 mm
69.3 mm
17 mm
M14x1.5
50.0 mm
73.9 mm
17 mm
FLOATING SEAT
Part No.
chrome
68020SU
69820SU
black
68020SUB
69820SUB
chrome
68051SU
69877SU
black
68051SUB
69877SUB
chrome
68055SU
69875SU
black
68055SUB
69875SUB
6
MCGARD LUG BOLT
S
7
BULGE STYLE CONE SEAT 60° Bulge lug nuts have an extended seating surface that is designed to match the wider seating surface used on some aluminium wheels.
THREAD SIZE
TOTAL LENGTH
HEX SIZE
PKG./4 Part No.
Box/100 Part No.
7/16-20
36.8 mm
19 mm
64011
69411
1/2-20
36.8 mm
19 mm
64010
69410
M12x1.25
36.8 mm
19 mm
64013
69413
M12x1.5
36.8 mm
19 mm
64012
69412
M14x1.5
41.5 mm
22 mm
64073
69473
M14x1.5
49.4 mm
21 mm
64023
69432
M14x1.5
49.4 mm
22 mm
64033
69433
THREAD SIZE
TOTAL LENGTH
HEX SIZE
PKG./4 Part No.
Box/144 Part No.
1/2-20
36.8 mm
19 mm
64029
69429
M12x1.25
36.8 mm
19 mm
-
69745SUB
M12x1.5
36.8 mm
19 mm
64015
69415*
M14x1.5
41.5 mm
22 mm
64074
69474*
M14x1.5
49.4 mm
22 mm
64034
-
Total Length
CHROME
WHEEL INSTALLATION KITS CONE SEAT 60° THREAD SIZE
M12x1.25
THREAD SIZE
M12x1.5
TOTAL LENGTH
36.8 mm lug nuts 32.5mm wheel locks
TOTAL LENGTH
36.8 mm
HEX SIZE
19 mm
HEX SIZE
19 mm
COLOUR
WHEEL INSTALLATION KIT incl. 16 Lug bolts, 4 wheel locks and 1 key Part No.
chrome
84862SU
black
84862SUB
COLOUR
WHEEL INSTALLATION KIT incl. 16 Lug bolts, 4 wheel locks and 1 key Part No.
chrome
84557SU
black
84557SUB
Detailed technical information please see page 16-17. Check out our application guide on page 18-19. NOTE: When installing wheel lock bolts and lug bolts, verify that it is the correct thread size, seating surface type (cone seat, radius seat, shank) and style as recommended by the wheel manufacturer. Minimum thread engagement must be equal to the thread diameter of the wheel stud. Example: M12x1.5 nut requires a minimum of 12mm of thread engagement.
LUG NUTS CONE SEAT 60° CHROME THREAD SIZE
TOTAL LENGTH
HEX SIZE
PKG./4 Part No.
Box/100 Part No.
7/16-20
38.1 mm
21 mm
64001
69401
1/2-20
38.1 mm
21 mm
64000
69400
1/2-20
63.5 mm
22 mm
64805 (PKG./8)
69405
M12x1.25
32.5 mm
21 mm
64003
69403
M12x1.5
38.1 mm
21 mm
64002
69402
M12x1.75
46.1 mm
21 mm
64019
69419
M14x1.5
41.5 mm
22 mm
64069
69469
64021
69428
M14x1.5
49.4 mm
21 mm
M14x1.5
49.4 mm
22 mm
64014
69424 69420
M14x2.0
57.1 mm
21 mm
64020
9/16-18
44.5 mm
21 mm
-
69422
9/16-18
44.5 mm
22 mm
64008
69418
9/16-18
63.5 mm
22 mm
64806 (PKG./8)
69406
TOTAL LENGTH
HEX SIZE
PKG./4 Part No.
Box/144 Part No.
Total Length
McGard lug nuts have been designed for long service lives. No spalling, peeling, or rust on the surfaces, and brilliance is maintained for years to come. Our lug nuts comply with the highest safety and durability standards in the automotive industry.
BLACK THREAD SIZE 1/2-20
38.1 mm
21 mm
64030
69430
M12x1.5
38.1 mm
21 mm
64031
69431
M14x1.5
41.5 mm
22 mm
64072
69472
M14x1.5
49.4 mm
21 mm
64022
-
M14x1.5
49.4 mm
22 mm
64024
-
M14x2.0
57.1 mm
21 mm
64025
-
9/16-18
63.5 mm
22 mm
64816 (PKG./8)
-
9
Total Length
LUG NUTS
Total Length
BLACK
SHANK STYLE LUG NUTS
DRAG RACING LUG NUTS
REGULAR - 18.9 MM SHANK LENGTH Lug Nuts with a 17.2 mm Shank Diameter.
Total Length
RACING STYLE - 12.5 MM SHANK LENGTH PKG./4* Part No.
Box/100** Part No.
7/16-20
41.9 mm
21 mm
61001
69101
1/2-20
41.9 mm
21 mm
61000
69100
M12x1.25
41.9 mm
21 mm
61003
69103
M12x1.5
41.9 mm
21 mm
61002
69102
Thread Size
Total Length
Hex Size
PKG./4* Part No.
Box/100** Part No.
7/16-20
40.6 mm
21 mm
60128
69128
1/2-20
40.6 mm
21 mm
60127
69127
M12x1.5
40.6 mm
21 mm
60129
69129
Shank Length
Hex Size
Shank Length
Total Length
Total Length
Lug Nuts with a 17.2 mm Shank Diameter.
Thread Size
Shank Diameter
Shank Diameter
PKG./4 Part No.*
7/16-20
47.0 mm
21 mm
62001
1/2-20
47.0 mm
21 mm
62000
M12x1.5
47.0 mm
21 mm
62002
Shank Diameter
LONG - 25.4 MM SHANK-DUPLEX Total Length
Hex Size
PKG./8 Part No.*
1/2-20
61.6 mm
22 mm
62820
9/16-18
61.6 mm
22 mm
62822
Shank Length
Thread Size
Total Length
Lug Nuts with a 17.2 mm Shank Diameter.
Shank Diameter
EXTRA LONG - 34.6 MM SHANK LENGTH
Thread Size
Total Length
Hex Size
PKG./4* Part No.
Box/100** Part No.
7/16-20
47.2 mm
21 mm
61006
69106
1/2-20
47.2 mm
21 mm
61005
69105
M12x1.5
47.2 mm
21 mm
61007
69107
RACING STYLE - 34.6 MM SHANK LENGTH Lug Nuts with a 17.2 mm Shank Diameter. Thread Size
Total Length
Hex Size
PKG./4* Part No.
Box/100** Part No.
7/16-20
62.8 mm
21 mm
63001
69301
1/2-20 offset
62.8 mm
21 mm
63000
69300
1/2-20
62.8 mm
21 mm
63004
69300
M12x1.5
62.8 mm
21 mm
63002
69302
Hex Size
PKG./4* Part No.
Box/100** Part No.
7/16-20
57.7 mm
21 mm
63015
69315
1/2-20
57.7 mm
21 mm
63014
69314
M12x1.5
57.7mm
21 mm
63016
69316
Shank Length
Total Length
Total Length
Lug Nuts with a 17.2 mm Shank Diameter. Thread Size
STAINLESS STEEL WASHERS Style
Shank Diameter
Thickness
Inside DIA.
Outside Dia.
Part No.
Standard Mag (pgk./10)
3 mm
17.6 mm
27 mm
78711
Standard Mag (pgk./20)
3 mm
17.6 mm
27 mm
78710
Standard Mag (box/100)
3 mm
17.6 mm
27 mm
78712
*PKG./4 and PKG./8 contains stainless steel washers. **Bulk boxes of 100 do not include washers.
NOTE: When installing wheel lock bolts and lug bolts, verify that it is the correct thread size, seating surface type (cone seat, radius seat, shank) and style as recommended by the wheel manufacturer. Minimum thread engagement must be equal to the thread diameter of the wheel stud. Example: M12x1.5 nut requires a minimum of 12mm of thread engagement.
10
Shank Diameter
11
Total Length
Hex Size
Shank Length
Total Length
Lug Nuts with a 17.2 mm Shank Diameter.
Shank Length
Total Length
Thread Size
Shank Length
Lug Nuts with a 17.2 mm Shank Diameter.
Total Length
RACING STYLE - 18.9 MM SHANK LENGTH
LONG - 24.0 MM SHANK LENGTH
Shank Diameter
Installation Kits in chrome, gold and black include 16 Spline Drive lug nuts, 4 Tuner wheel locks, 1 wheel lock key and 1 installation tool. Installation Kits in red and blue include 20 Spline Drive lug nuts and 1 installation tool.
THREAD SIZE
M12x1.5
31.5 mm
TOTAL LENGTH
31.5 mm
COLOUR
INSTALLATION KIT Part No.
BOX/50 Part No.
PKG./4 Part No.
chrome
65554CN
65003
65354
black
65554BK
65003BK
65354BK
gold
65554GD
65003GD
-
COLOUR
INSTALLATION KIT Part No.
BOX/50 Part No.
PKG./4 Part No.
chrome
65557CN
65002
65357
black
65557BK
65002BK
65357BK
gold
65557GD
65002GD
-
12
40.6 mm
THREAD SIZE
TOTAL LENGTH
M14x1.5
41.8 mm
M14x1.5
Total Length
M12x1.25
TOTAL LENGTH
1/2-20
49.1 mm
COLOUR
INSTALLATION KIT Part No.
BOX/50 Part No.
PKG./4 Part No.
chrome
65540
65001
65430
black
65540BK
65001BK
65340BK
COLOUR
INSTALLATION KIT Part No.
BOX/50 Part No.
PKG./4 Part No.
chrome
65515
65036
65315
black
65515BK
65037
65315BK
chrome
65510
65024
65310
black
65510BK
65025
65310BK
INSTALLATION TOOL
HEX SIZE
PKG./1 Part No.
PKG./10 Part No.
for 1/2", M12
21 mm
65300
65100
for M14
21 mm
040592
65400
Total Length
THREAD SIZE
TOTAL LENGTH
13
Total Length
A non-compromise design engineered to fit small diameter recesses in Tuner style wheels. Spline Drive lug nuts offer a closed-end design, maximum gripping power, more stud engagement and a greater surface than socket style lug nuts. In addition they are 30 % lighter. For aluminium cone seat wheels only, not for use on steel wheels. Installation tool is required for installation & removal.
THREAD SIZE
Total Length
SPLINE DRIVE LUG NUTS CONE SEAT 60°
BOLT APPLICATION VERIFICATION Verification for Cone & Radius Seat Lock Bolt or Lug Bolt: Typical Lock Bolt
Typical Lock Bolt
Typical Lock Bolt
Typical Lock Bolt
60° Cone
60° Cone
Radius Seat
Radius Seat
3. Install one McGard lug or lock bolt on each wheel from step one. Tighten to normal installation torque. Minimum thread engagement into hub assembly must be 5½ complete 360º revolutions. Too short of a shank will result in lack of engagement and an unsafe condition (see illustration #1). Too long of a shank can extend beyond the hub assembly and possibly cause damage to other vehicle parts (see illustration #2).
WARNING: Lug Bolts are critical wheel fasteners. Read the following guidelines to ensure that you choose and install the correct lug bolt. Failure to comply with guidelines & warnings could cause an unsafe condition and result in serious injury or death. 1. Remove one lug bolt from both a front wheel and rear wheel.
CHOOSING THE CORRECT LUG BOLT FLOATING SEAT CONE DIAGRAM
SOLID SEAT CONE DIAGRAM
Choosing The Correct Lug Bolt In many cases McGard lug bolts are designed to be a direct replacement for OEM lug bolts. In our app guide on page 18-19, you can find the correct lug bolts for the particular vehicle with OEM alloy wheels.
FLOATING SEAT
SOLID SEAT
PROJECTED INTERSECTION
CONE SEAT INTERSECTION
S
SHANK
If you cannot find the model or have aftermarket lug bolts you will have to check for the following: correct thread size; cone or radius style seating surface; the shank length is not too short or too long. Refer to this diagram for information on correctly measuring your lug bolt.
2. Visually verify that the seating surface of your current fasteners match the McGard fasteners. Verify that the thread size and shank measurement of your current fasteners match the McGard fasteners.
4. Upon verification of proper application, complete installation per McGard’s installation instructions.
Note: If your spare tire is a steel wheel and your road wheels are aluminum, you must also verify the application for your spare tire/wheel. If you do not wish to verify the application now, you should keep enough of your original fasteners in your vehicle for use with the spare tire/wheel. ILLUSTRATION #1
ILLUSTRATION #2 WHEEL SEAT
WHEEL SEAT
WHEEL
WHEEL
END OF SHANK
Possible misapplication: shank has passed through hub assembly, which could result in vehicle damage.
Misapplication: insufficient thread engagement into the hub assembly.
Shank Length Verification FLOATING SEAT CONE DIAGRAM
SOLID SEAT CONE DIAGRAM
FLOATING SEAT
SOLID SEAT
PROJECTED INTERSECTION
For Solid Seat (1-piece) bolt designs the shank length S is measured from the end of the shank to the INTERSECTION (narrowest point of the seat). See the solid seat diagrams captioned in grey.
CONE SEAT INTERSECTION
S
SHANK
For Floating Seat (2-piece) bolt designs the shank length S is measured from the end of the shank to the PROJECTED INTERSECTION (pink dotted line). See the floating seat diagrams captioned in pink. The PROJECTED INTERSECTION on a floating seat (2-piece) bolt corresponds with the INTERSECTION on a solid seat (1-piece) bolt.
END OF SHANK
14
WARNING: Lug Bolts are critical wheel fasteners. Read the following guidelines to insure that you choose the correct lug bolt. Failure to comply with guidelines & warnings could cause an unsafe condition and result in serious injury or death. Do not use: a bolt with a different seat style (cone, radius, flat); or a bolt shorter or longer than the lug bolt specified for your wheel. If you are unsure of which part number to use, or have installation questions, please contact us at info@mcgard.de NOTE: When installing wheel lock bolts and lug bolts, verify that it is the correct thread size, seating surface (cone seat, radius seat) and style as recommended by the wheel manufacturer. Minimum thread engagement into hub assembly must be 5½ complete 360º revolutions of bolt (5½ full bolt rotations). 15
Verification for Mag or Shank Style Lock Nut or Lug Nut: Typical Lock Nut Washer Flat Seat Shank
Typical Lug Nut Washer Flat Seat Shank
long and is resting on the hub assembly which will not allow the washer to tighten to the wheel. This means the McGard set is not the proper one for your vehicle.
1. Remove one lug nut from both a front wheel and a rear wheel. 2. Visually verify that the McGard lock nut or lug nut shank length matches your lug nut.
Note: If your spare tire is on a steel wheel and your road wheels are aluminum you must also verify the application for your spare tire/wheel. If you do not wish to verify the application now, or your spare tire/wheel has a different seating surface, keep your original lug nuts in your vehicle for use with the spare tire/wheel.
3. Verify the McGard lock nut or lug nut shank diameter matches your lug nut. In all lug nut applications, the McGard lug nut must not have a loose or sloppy fit to the wheel hole diameter. 4. Install one McGard lug nut or lock nut on each wheel from step one. Tighten to normal installation torque.
NUT APPLICATION VERIFICATION Verification for Cone & Radius Seat Lock Nut or Lug Nut:
Typical Lock Nut 60° Cone
Typical Lug Nut 60° Cone
Typical Bulge Style Lug Nut 60° Cone
Typical Lock Nut Radius Seat
to fully contact the wheel. Check for space or gaps between wheel and lock or lug nut. This means the McGard set is not the proper one for your vehicle.
1. Remove one lug nut from both a front wheel and rear wheel. 2. Visually verify that the seating surface of your lug nut matches the McGard lug nut/lock nut.
6. Minimum thread engagement must be equal to the thread diameter of the wheel stud.
5. Verify that the washer is tight on the wheel. Check for space or gaps between wheel, washer and lock/lug nut. If there are gaps and the washer is loose the lug nut or lock nut may be bottomed on the stud, or the shank has bottomed on the hub assembly (see illustration #3). Bottomed out refers to the closed end of the nut resting on the stud, while the bottom of the nut fails to fully contact the wheel, or the shank is too
7. Upon verification of proper application, complete installation per McGard’s installation instructions.
ILLUSTRATION #3 Washer is loose.
Washer is loose.
Note: If your spare tire is on a steel wheel and your road wheels are aluminum, you must also verify the application for your spare tire/wheel. If you do not wish to verify the application now, keep your original lug nuts in your vehicle for use with the spare tire/wheel.
3. Install one McGard lug nut or lock nut on bolt wheels from step one. Tighten to normal installation torque. 4. Remove both McGard lug nuts or lock nuts. 5. Look at the seating surface of each McGard lug nut or lock nut (see illustration #1). If the seating surface is not marked by the wheel, the lug nut or lock nut may be bottomed on the stud (see illustration #2). Bottomed out refers to the closed end of the nut resting on the stud, while the bottom of the nut fails
6. Minimum thread engagement must be equal to the thread diameter of the wheel stud.
ILLUSTRATION #1
ILLUSTRATION #2
Misapplication: shank has bottomed on hub assembly.
Misapplication: shank has bottomed on hub assembly.
7. Upon verification of proper application, complete installation per McGard’s installation instructions.
Seat will not be marked.
Fastener seating surface should be marked by the wheel.
16
Misapplication: stud has bottomed on fastener.
NOTE: When installing wheel lock bolts and lug bolts, verify that it is the correct thread size, seating surface type (cone seat, radius seat, shank) and style as recommended by the wheel manufacturer. Minimum thread engagement must be equal to the thread diameter of the wheel stud. Example: M12x1.5 nut requires a minimum of 12mm of thread engagement. 17
APPLICATION GUIDE
Nissan
350Z, 370Z, Almera, Axxess, Cube, Evalia, GT-R, Juke (2018-), Leaf, Maxima, Micra (K11, K13), Murano, Navara, Note (-08/2013), Pathfinder (1988-), Patrol (2008-), Pixo, Prairie, Primastar, Primera, Pulsar, Qashqai (J10 2013-), Serena, Sentra, Stanza (1986-), Sunny (1990-), Terrano (4x4; 1988-), Tiida, Tino, X-Trail (only for wheels with cone seat 60° holes)
84862SU
69413
84862SUB
69475SUB
Juke (09/2019-), Micra (K12, K14 2017-), Qashqai (J11 2014-)
67179SU
69779SU
67179SUB
69779SUB
Opel/Vauxhall
Ampera, Antara, Astra (J, K), Cascada, GTC, GT, Insignia B, Karl, Mokka, Monterey, Sintra, Zafira (C Tourer)
84557SU
69412
84557SUB
69415
Porsche
911 (991, 996, 997), Boxster, Carrera S4, Cayman, Macan, Taycan
68020SU
69820SU
68020SUB
69820SUB
Cayenne, Panamera
68044SU
69844SU
68044SUB
69844SUB
Alaskan (2017-), Koleos (till 2011-)
84862SU
69413
84862SUB
69475SUB
Arkana, Captur (I,II), Kadjar (2015-), Talisman
67179SU
69779SU
67179SUB
69779SUB
Laguna III
67222SU
69722SU
67222SU
69722SUB
Altea, Ateca, Arona, Ateca, Cordoba, El-Born, Exeo, Formentor, Ibiza, León, Taracco, Toledo
68018SU
69818SU
68018SUB
69818SUB
Alhambra
68044SU
69844SU
68044SUB
69844SUB
Skoda
Enyaq, Fabia, Kamiq, Karoq, Kodiaq, Octavia, Praktik, Rapid, Roomster, Scala, Superb, Yeti
68018SU
69818SU
68018SUB
69818SUB
BRZ,Forester, Impreza, Legacy, Levorg, Outback, Sedan, Station, SRX, SVX, Trezia, Tribeca, Vivo, XV
84862SU
69413
84862SUB
for vehicles with original alloy wheels Chrome
Black
Wheel Installation Kit Part Number
Bulk Box* Part Number
Wheel Installation kit Part Number
Bulk Box* Part number
Alfa Romeo
Giuletta (Typ 940), Mito, Tonale
67216SU
69716SU
67216SUB
69216SUB
Audi
A1, A3, A4, A5, A6, A7, A8 (- 2018), Q2, R8, RS3, RS4, RS5, RS6, S6, TT
68018SU
69818SU
68018SUB
69818SUB
A8 (2019-), E-Tron, Q3, Q4, Q5, Q6, Q7 (4M 2015-), Q8, Q9
68020SU
69820SU
68020SUB
69820SUB
Q7(-2015)
68044SU
69844SU
68044SUB
69844SUB
1 series (-2010), 3 series (-2011), 5 series (-2009), 6 series (-2010), 7 series (-2001), 8 series, X1, Z1, Z3, Z4 (-2016), Z8
67179SU
69779SU
67179SUB
69779SUB
1 series (2011-), 2 series, 3 series (2012-), 4 series, 5 series (2010-), 6 series (2011-), i3, i4, i8, iX, iX3, X3 (2010-), X4, X5 (2007-), X6, X7, X8
67226SU
69726SU
67226SUB
69726SUB
500, 500c, 500e, 500L, 500x, Fiorino, Panda (2012-), Sedici, Strada, Stilo, Tipo (2016-)
67216SU
69716SU
67216SUB
69716SUB
Freemont
84557SU
69412
84557SUB
69415
B-Max, C-Max (2012-), EcoSport, Fiesta (2013-), Focus (2012), KA+ (2016), Kuga (2013-), Mondeo (2015-), Puma (2019-), Ranger (2015-), Tourneo Courier (2012-2018)
84557SU
69412
84557SUB
69415
Subaru
Justy G3X
67179SU
69779SU
67179SUB
69779SUB
Tourneo Connect (2022-), Transit Connect (2022-)
68018SU
69818SU
68018SUB
69818SUB
Suzuki
84862SU
69413
84862SUB
69475SUB
Accent, Ascente, Atos, Bayon, Confiro, Coupé, Elantra, Genesis, Getz, Grandeur, Grand Santa Fe,i10, i20, i30, i40, iX20, iX35, iX55, Ioniq, Ioniq 5, Ioniq 6, Kona, Lantra, Matrix, Nexo, Pony, S-Coupé, Santa Fe, Santamo, Terracan, Tiburon, Trajet, Tucson, Veloster, Venue, XG
84557SU
69412
84557SUB
69415
Alto, Baleno, Carry, Celerio, Grand Vitara,Jimny, Kizashi, Liana, Swift (EA/MA, AZ, RZ)
Volkswagen
Arteon, Beetle (2011-), Bora, Caddy (2004-), Eos, Golf (1997-), ID3, ID4, Jetta (2005-), Passat (1996-), Passat CC, Phaeton, Polo (2002-), Scirocco, Tiguan, Touran, T-Cross, T-Roc
68018SU
69818SU
68018SUB
69818SUB
Infiniti
Q30, Q50, QX30
84862SU
Amarok, T4, T5, T6, T7, Touareg
68044SU
69844SU
68044SUB
69844SUB
Jeep
Campus, Compass (-2015), Patriot (-2015) Cherokee (2015-), Compass (2017-), Renegade
Kia
BMW
Fiat
Ford
Hyundai
69413
84862SUB
84557SU
69412
84557SUB
69415
67261SU
69761SU
67261SUB
69761SUB
B-SUV, Carens, Carnival, Cee'd, Cerato, Credos, EV6, Forte, Joice, Magentis, Niro, Opirus, Optima, Picanto, Pride, Pro Ceed´d, Retona, Rio (from '05), Sephia, Shuma, Sorento, Soul, Spectra, Sportage, Stinger, Stonic, Venga, X-Ceed
84557SU
69412
84557SUB
69415
Lexus
all models with cone seat weels
84557SU
69412
84557SUB
69415
Mazda
2 (-2021), 3, 5, 6, BT50, CX-3, CX-30, CX-5, CX-6, CX-7, CX-9, MPV, MX-5, MX-30, RX-8,Tribute
84557SU
69412
84557SUB
69415
MercedesBenz
A-Class (W169, W176, W177), B-Class (T245, W246, W247), C-Class (W204, W205), CL (C215, C216), CLA, CLS (C219, C218), GLA, E-Class (W211, W212), E-Class Coupe, EQA, EQB**, EQC**, EQE**, EQS**, EQV** R-Class (W/V251), SL (from '02 R230), SLK (R172), Viano (till ´14), Vito (W638, W639), V-Class (447)
68174SU
69874SUB
68174SUB
69874SUB
E-Class (W213), EQB**, EQC**, EQE**, EQS**, EQV**, G-Class, GL (X164, X166), GLA, GLB, GLC, GLE, GLK, GLS (till´18), SKlasse, (W140, W220, W221, W222, W223), SLS, R-Klasse
68053SU
69876SU
68053SU
69876SUB
X-Class
84862SU
69413
84862SUB
69475SUB
Cabrio (R50, R52 -03/2006), Mini Cooper (-08/2006), Mini Cooper S (-08/2006), Mini One (-08/2006)
67179SU
69779SU
67179SUB
69779SUB
Cabrio (R50 04/2006-), Countryman (2010-), Coupe, Clubman, Mini Cooper (R56 09/2006-), Mini Cooper S (R56 09/2006-), Mini One (R56 09/2006-), Paceman, Roadster, SE
67226SU
69726SU
67226SU
69726SUB
Mini
69475SUB
Renault
Seat/Cupra
Box*
NOTE: The applications in this list are only recommendations that are given to the best of our knowledge. McGard assumes no responsibility for the correctness of the application contained within this printed literature. The information listed by McGard is only a guide. McGard assumes no responsibility for misapplication or misuse of the information contained within this printed literature. The user must verify with the vehicle manufacturer and the wheel manufacturer the correct lug nut/ bolt thread size, length and shape of seat (cone, radius or flat seat) before installing lug nuts/wheel locks. McGard reserves the right to make changes in specification and design without any prior notice, or incurring responsibility.
** Please compare the shaft lengths of the wheel locks with those of the original fasteners.
18
= one box with bolts includes 50 bolts = one box with nuts includes 100 nuts, 69415 includes 144 nuts
19
McGard Deutschland GmbH Nordstr. 12 · 74226 Nordheim · Deutschland Tel. 0049 (0)7133 90 19 - 0 · info@mcgard.de · www.mcgard.de McGard LLC Headquarters, USA 3875 California Road · Orchard Park, New York 14127-4198 · U.S.A. Tel. 001 716 662 8980 · info@mcgard.com · www.mcgard.com
McGard Japan Poruto Koike Bldg. 7F · 5-2 Shintoshin · Chuo-ward, Saitama City · Saitama Prefecture · 330-0081 · Japan Tel. 0081 48 600 6070 · info.japan@mcgard.com · www.mcgard.jp
McGard Singapore Pte. Ltd. 60 Paya Lebar Road · Paya Lebar Square · Level 08-02 · Singapur 409051 Tel. 0065 6246 8066 · tsugiyama@mcgard.com · www.mcgard.com
McGardESC S.L. Amillaga kalea ,15 + Apdo 61 · 20570 Bergara - Gipuzkoa - Spain info@mcgardesc.com · www.mcgardesc.com
McGard®, Tough Nuts® and SplineDrive® are registered trademarks of McGard. All other brand or product names are trademarks or registered trademarks of their respective holders. This catalogue is protected by copyright laws, right of privacy, and publicity laws of Germany and other countries. It may not be reproduced or transmitted in whole or in part in any form, without prior written permission. Any infringement will be liable to the full extent of the law. Disclaimer: McGard reserves the right to make changes or improvements on any item without incurring any obligation, and to discontinue or change styles or specifications at any time without notice. Indications of sources for the images and graphics used: Adobe Stock · Personal images ©2022 McGard. All rights reserved. Printed in Germany. McGard products are manufactured in Germany and/or in the U.S.A. This catalogue is recyclable.
Form number: YB15010322