Metamark MD-CV2

Premium Grade Clear Vision (Perforated One-Way Film)

Metamark MD-CV2 is a premium grade perforated one-way vision film, supplied on a multi-layer release liner to offer improved print performance on Solvent, Eco-Solvent, Latex and UV printers. It has 40% open area and 1.6mm perforations. It is suitable for advertising applications on vehicles and buildings, maintaining visibility from the inside.

The black/white laminate has a clear adhesive to maintain full visibility through the holes and to ensure clean removal up to 6 months after application. (Not recommended for application to polycarbonate). Overlaminating is recommended to maintain visibility in wet weather.

SPECIFICATION

• 145 Micron Perforated PVC

• 1.6mm Perforations, 40% Open Area

• Removable Solvent-Based Adhesive

• Fire Rating M1 and B1 Certified

• Durability 2 years (unprinted)

PRODUCT RANGE

MD-CV2

Clear Vision

Print Compatibility: Solvent, Eco-Solvent, Latex and UV inks

Matched Overlaminate: MetaGuard 670 (Curved Glass) MetaGuard 620 (Flat Glass)

Minimum Order 1m

MetaGuard 620

Optically Clear Polyester

MetaGuard 620 provides maximum UV protection and exhibits good anti-graffiti properties. This super thin 25 micron polyester has a high gloss finish and clear adhesive with UV inhibitors offering enhanced colour definition of prints. It is suitable for use on flat glass only. It provides a matched system for overlaminating Metamark Clear Vision.

SPECIFICATION

• 25 Micron High Gloss Polyester

• Crystal Clear Solvent-Based Adhesive

• For use on Flat Surfaces only (Non Conformable)

• Protects Prints from Abrasion and UV

• Also provides modest protection from Graffiti

• Durability 2 years1

MetaGuard 670

Optically Clear Cast Overlaminate

MetaGuard 670 is an optically clear cast overlaminate, for use on Clear Vision. The conformable 40 micron cast film allows application to curved glass, while providing UV and abrasion resistance.

SPECIFICATION

• 4 0 Micron Cast PVC

• High Gloss Finish

• Crystal Clear Solvent-Based Adhesive

• Protects Prints from Abrasion and UV

• Slightly Conformable – for use on curved glass

Durability 7 years1

1 This refers to the overlaminate and not the protection that it gives the printed image.

MG-620 High