Martin Deerline Spring Parts Catalogue

n

T R U ST E D B R A N D S

n

LO C A L A DV I S O R S

n

PAC K AG E D S O L U T I O N S

Productivity Versatility Convenience Performance Muscle

John Deere Parts from Martin Deerline

SPRING 2014 PARTS CATALOG martindeerline.com 1.877.627.8468 TRIED, TESTED AND RECOMMENDED

Seeder Parts Update Your Air Seeder Secondary Tower System • Twist off lid: No tools required • No Rust! Poly rubber design • Fits 5-12 Port manifolds for Flexi-Coil and John Deere Secondary Towers Secondary manifolds with 1-in. diameter lines evenly distribute the seed and/or fertilizer from the primary manifold(s) to the furrow openers.

The secondary manifold is made of durable, maintenance-free ethylene-propylene molded (EPDM) rubber. Features of the secondary manifold: • Rust resistant, important when applying fertilizer or treated seed • Easier to service with an easy-to-remove lid, no tools required • No long bolt in the secondary tower • Lid is tethered to the manifold • The outlet ports are numbered

Meters, Rollers and Rings for John Deere Air Seeders Use the low meter roller for seeds such as flax, canola and alfalfa. The medium roller is best when planting wheat, barley, canola and small soybeans up to 0.25 inches in diameter and with medium rates of fertilizer. The high rate roller is for high rates of fertilizer and large soybeans bigger than 0.25 inches in diameter. The very high rate roller is best used when planting barley and oats with beards, large seeds such as garbanzo beans and with very high fertilizer rates.

NUMBER METER TYPE For 1900 Air Seeders: Meter roller kits: AA45605 Low AA45606 Regular AA45607 High rate Meter rollers: A58874 Low A58473 Regular A58479 High rate A69212 Very high rate Fine-tuning rings: A57192 Low A57197 Regular A57195 High rate A70069 Very high rate

APPLICATION RATE

NOW

1 – 20 lb. per acre 20 – 130 lb. per acre 30 – 220 lb. per acre

$110.47 $96.34 $87.34

1 – 20 lb. per acre 20 – 130 lb. per acre 30 – 220 lb. per acre 50 – 265 lb. per acre

$53.55 $40.54 $35.00 $32.76 $7.58 $7.58 $7.58 $5.45

Disk Openers and Bearing Kits for Drills NUMBER N283804 N283805 AA58324 JD8933 JD8253 B13294 AN281856 AA44267 AA48762

DESCRIPTION DRILL APPLICATION Disk opener — 18 in.

750, 1560, 1850 and 1860 Double disk opener, 13.5 in.

730, 450, 8000 and 9400 Opener blade assembly, 13 1/2 in.

Prices in effect Bearing cone 750 and 1850 until April 30, 2014 Bearing cup 750 and 1850 Bearing seal 750, 1560, 1850 and 1860 Bearing 1560 and 1860 Opener bearing kit 750 and 1850 Opener rebuild kit 750 and 1850

NOW $41.43 $20.57 $42.05 $7.16 $2.88 $5.61 $141.40 $44.97 $94.00

A58473 Regular A58479 High rate A69212 Very high rate Fine-tuning rings: A57192 Low A57197 Regular A57195 High rate A70069 Very high rate

$40.54 $35.00 $32.76

20 – 130 lb. per acre 30 – 220 lb. per acre 50 – 265 lb. per acre

Seeder Parts

$7.58 $7.58 $7.58 $5.45

Disk Openers and Bearing Kits for Drills NUMBER N283804 N283805 AA58324 JD8933 JD8253 B13294 AN281856 AA44267 AA48762

DESCRIPTION Disk opener — 18 in.

Double disk opener, 13.5 in.

Opener blade assembly, 13 1/2 in.

Bearing cone Bearing cup Bearing seal Bearing Opener bearing kit Opener rebuild kit

Disk Op

DRILL APPLICATION 750, 1560, 1850 and 1860 730, 450, 8000 and 9400

NOW $41.43 $20.57 $42.05 $7.16 $2.88 $5.61 $141.40 $44.97 $94.00

750 and 1850 750 and 1850 750, 1560, 1850 and 1860 1560 and 1860 750 and 1850 750 and 1850

Air Seeder Hose - Low Pressure

Description 1" Green Helix Air Seeder Hose 1" Black Helix Air Seeder Hose 2 1/2" Green Helix Air Seeder Hose 2 1/2" Black Helix Air Seeder Hose

John Dee or clear h hose is re as for agr

$0.97/ft.* $0.97/ft.* $1.99/ft.* $1.99/ft.*

* Sold in 100 ft. Rolls See Martin Deerline for a complete seeder hose lineup.

John Deere talc is specially designed for todays wide range of seed treatments to

Talc enhance seed flowability in all weather conditions. Talc is highly recommended for

use vacuum meters.

Some meters require and treatments graphite blend Johnwith Deere talc isseed specially designed for todays wide80/20 range talc of seed to so check with your manufacturer's requirements before selecting. enhance seed flowability in all weather conditions. Talc is highly recommended for use with vacuum seed meters. Some meters require NUMBER DESCRIPTION SIZE80/20 talc and graphite blend NOW so check withTalc your manufacturer's requirements 2before 1/2 gal. selecting.

A52577 $19.84 NUMBER A52577

DESCRIPTION Talc

SIZE 2 1/2 gal.

NOW $19.84

Graphite Provides trouble-free, easier operation, and longer wear with high planting Graphite speeds.

Minimizes buildup of gummy deposits that may be formed with other types of Providesgraphite. trouble-free, easier operation, and longer wear with high planting

speeds.

MinimizesDESCRIPTION buildup of gummy deposits that maySIZE be formed with other NOW NUMBER types of graphite.

TY26253 Graphite squeeze bottle 1 lb. $5.45 NUMBER TY26253

DESCRIPTION Graphite squeeze bottle

SIZE 1 lb.

martindeerline.com 1.877.627.8468

NUMBER N283804 N283805 AA58324 JD8933 JD8253 B13294 AN28185 AA44267 AA48762

Air See

John Deere offers 1-in., 1 1/4-in., 1 3/4-in. and 2 1/2-in. diameter, green, black, or clear helix hose for air seeder applications. This clear, smooth-core PVC hose is recommended for heavy-duty suction and discharge of seed, as well as for agricultural chemicals, marine and liquid waste.

NUMBER PM112GR100 PM112BK100 PM112GR250 PM112BK250

A58874 A58473 A58479 A69212 Fine-tuni A57192 A57197 A57195 A70069

NOW $5.45

NUMBER PM112GR PM112BK PM112GR PM112BK

ody End Caps Express™ Nozzle Body End ™ ™ ff fast Express Express Nozzle Body Caps turn spray onEnd andNoz off fast

culture imes in rn

Express Nozzle Body End Caps

turn spray on a turn spray off fast ™ on and

Express Nozzle Body End Caps support today’s Precision Agriculture practices by giving standard nozzle bodies quicker reaction times in response to GPS boom shut-off control signals. So you can turn Express Express Nozzle Body End Caps Nozzle support today’s Body Precision Agriculture End Caps support toda spray off and on quickly and decisively on overlaps, end rows practices practices by giving standard nozzle by bodies giving quicker reactionstandard times in nozzle bodies q and boundary areas. response response to GPS boom shut-offto controlGPS signals. So you boom can turn shut-off control sign

spray spray off and on quickly off and decisively andonon overlaps,quickly end rows and decisively on o Here’s how it works: Conventional boom designs trap air, andand boundary areas. boundary areas. causing a delay from the “close” signal to when spray actually stops.

Express Nozzle End Caps include a passive feature boom design Here’s howboom it works: Conventional Here’s how it works: Conventional designs trap air, Body that trapped air to escape through the nozzle body – causing a delay from the “close” signal to when causing a delay from the “close” signal to allows when spray actually times by 85 percent. Caps include a p stops.

Express End stops.

Express Nozzle Body End Capsreducing includeNozzle anozzle passiveturn-off/turn-on feature Body

turn spray on and off fast

allows trapped thatthat allows trapped air to escape through the nozzle body – air to escape through the no Here’s another good reason to try this product: better boom reducing nozzle turn-off/turn-on times by 85 pe reducing nozzle turn-off/turn-on times by 85 percent. hygiene. By eliminating the “dead end” termination of pipe, you stop chemical residue-reason and air-buildup. Ask us about Here’s another good to try this product: b Here’s another good reason to try this product: better boom Express Nozzle of Body End Caps today. hygiene.

By eliminating the “dead end” terminat hygiene.

By eliminating the “dead end” termination pipe, stop chemical youyou stop chemical residue- and air-buildup. Ask us aboutresidue- and air-buildup. Ask Express Nozzle Body End Caps today.

Express Nozzle Body End Caps today.

Express Nozzle Body End Caps support today’s Precision Agriculture practices by giving standard nozzle bodies quicker reaction times in Express™ Nozzle Body End Caps response to GPS boom shut-off control signals.

So you can turn Express™ Nozzle Body End Caps Express™ Nozzle Body End Caps spray off and on quickly and decisively on overlaps, end rows and boundary areas.

trapped air. n-off/turn-on is from the NOW $38.26 $38.26

Express Nozzle Body End Caps include a passive feature that eliminates trapped air.

By allowing air to escape through the nozzle body, it reduces nozzle turn-off/turn-on Express Express Nozzle Body End Caps Nozzle include a passive Body feature that eliminates End trapped Caps air. include a passive fea times by 85 percent. With its removable end plug, it’s easy to flush debris from the By allowing By air allowing to escape through the nozzle airbody, to it reduces escape nozzle turn-off/turn-on through the nozzle body, i boom pipe, making boom cleanout a breeze. timestimes by 85 percent. With by its removable 85 percent. end plug, it’s easy to flush With debris from its the removable end plug, i boom boom pipe, making boom pipe, cleanout a breeze. making boom cleanout a breeze.

NUMBER DESCRIPTION NOW

PM74333316DESCRIPTION 1" Express Cap Fitting w/NOW Nozzle Body End Cap (standard) $38.26 NUMBER NUMBER DESCRIPTION 1" Express Express Cap Fitting w/ Nozzle Body End Cap (high flow) $38.26 PM74333316 PM74333316 1" Express Cap Fitting w/ PM74333314 Nozzle Body End 1" Cap (standard) $38.26 Cap Fitting w/ Nozzle Body PM74333314 PM74333314 1" Express Cap Fitting w/ Nozzle Body End 1" Cap Express (high flow) $38.26 Cap Fitting w/ Nozzle Body

Express™ Wet Boom Fittings Here’s howExpress™ it works:Conventional boom designs trapWetair,Boom Express™ Wet Boom FittingsExpress Wet Boom Fittings Fittings feature a connection that is quick and easy to assemble, while providing a quality, leakproof seal for stainless steel or polypropylene pipe. causing a delay from the “close” signal to when spray actually stops. Express Nozzle Body End Caps include a passive feature that allows trapped air to escape through the nozzle body – reducing nozzle turn-off/turn-on times by 85 percent.

o assemble, ene pipe.

NOW $20.44 $34.63 $20.44 $20.44 $20.44

Express Boom Fittings feature a connection th Express Wet Boom Fittings Wet feature a connection that is quick and easy to assemble, providing a steel quality, leakproof seal for stainles whilewhile providing a quality, leakproof seal for stainless or polypropylene pipe.

NUMBER DESCRIPTION NUMBER NUMBER DESCRIPTION DESCRIPTION NOW Universal Flange Wet Boom Fittings Universal Universal Flange Wet Boom Fittings Flange Wet Boom Fittings PM74332502 Express Cap Fitting X 1" Universal Flange Straight PM74332502 PM74332502 Express Cap Fitting X 1" Universal Flange Express Straight Cap $20.44 Fitting PM74332503 2 Express Cap Fitting X 1" Universal Flange Tee X PM74332503 PM74332503 2 Express Cap Fitting X 1"Hose Universal 2Boom Tee Express Cap $34.63 Fitting BarbFlange Wet Fittings Hose Barb Hose Wet Boom Fittings Barb Wet Boom PM74332608 Express Fittings Cap Fitting X 1" Hose Barb Straight PM74332608 PM74332608 Express Cap Fitting X 1" Hose Barb Straight Express Cap $20.44 Fitting X PM74332610 Express Cap Fitting X 1" Hose Barb Elbow PM74332610 PM74332610 Express Cap Fitting X 1" Hose Barb Elbow Express Cap $20.44 Fitting X Cam Lock Wet Boom Fitting Cam Lock Cam Wet BoomLock Fitting Wet Boom Fitting PM74332613 Express Cap Fitting X 1" Male Cam Lock Straight PM74332613 PM74332613 Express Cap Fitting X 1" Male Cam LockExpress Straight Cap $20.44 Fitting X

Here’s another good reason to try this product: better boom hygiene. By eliminating the “dead end” termination of pipe, you stop chemical residue- and air-buildup. Ask us about Express Nozzle Body End Caps today.

NOW

$20.44 1" Universal Flan $34.63 X 1" Universal Fla

$20.44 1" Hose Barb Str $20.44 1" Hose Barb Elb

$20.44 1" Male Cam Loc

Prices in effect until April 30, 2014

aying position. hanging can be a time-consuming, task. across the spraying ur nozzlenozzles bodies have the highest flow rates tedious in the industry ut with our two, turret styles, 3-way and 5-way, you get the most efficient change ressure range fnd spray possible.

Simplypressure rotate the nozzle body until theindesired nozzle is in the theytips provide the lowest drop at any given flow the industry praying position.

UMBER DESCRIPTION NOW Our nozzle bodies have the highest flow rates in the industry across the spraying gh-flow pressureNozzle rangeBodies 11/16" port, Viton seals 206621 5-position, And they provide the lowest pressure drop at any given flow in the industry$34.07

Sprayer Parts

Johncheck Deere Nozzle Bodies MHF12DCVV valve with Viton (16 open/12 close) $7.06 John 12-psi Deere Nozzle Bodies NUMBER DESCRIPTION NOW Changing nozzles be Viton a time-consuming, MHF15DCVV 15-psi check valvecan with (22 open/15tedious close)task. $7.80 ChangingBut nozzles can be a time-consuming, tedious task. with our two, turret styles, 3-way and 5-way, you get the most efficient change igh-flow Nozzle Bodies and 5-way Bodies with Tab for Boom Clamp5-way, you get the most efficient change ButNozzle with of our two, turret styles, 3-way spray tips possible.

Simply rotateand the nozzle body until the desired nozzle is in the 11/16" port, 1/2 Viton seals N206621of spray3-position, 5-position, $34.07 M42W7 . clamp $16.60 tips possible.

Simply rotate the nozzle body until the desired nozzle is in the spraying position.

3/4. valve MHF12DCVV 12-psi check with (16flow open/12 $7.06 M42Y7 clamp $14.56 •position.

Our nozzle bodies have theViton highest rates in close) the industry across the spraying spraying3-position, pressure range MHF15DCVV 15-psi check valve with Vitonflow (22 open/15 close) $7.80 M42K7 3-position, 1-in. clamp • Our nozzle bodies have the highest rates in the industry across the$14.59 spraying • And they provide the lowest pressure drop at any given flow in the industry - and 5-way Nozzle Bodies 3with Tab for Boom Clamp pressure range M49Y7 5-position, /4. clamp $14.54 NUMBER DESCRIPTION NOW 1/2. lowest • And they provide the pressure drop at any given flow in the industry M42W7 3-position, clamp $16.60 M49K7 5-position, 1-in. clamp $14.54 High-flow Nozzle Bodies 3 M42Y7 /4.Boom clamp $14.56 ngle DropNUMBER Nozzle 3-position, Body forDESCRIPTION Wet AN206621 5-position, 11/16" port, Viton seals $34.07 NOW 1 M42K7 3-position, 1-in. clamp $14.59 12-psi check valve with Viton (16 open/12 close) $7.06 size /2-in. pipe $2.89 M745 forPMHF12DCVV High-flow Nozzle Bodies 3/4. clamp PMHF15DCVV 15-psi11check valve with Viton (22 open/15 close) $7.80 3/4-in. pipe M49Y7 AN206621 5-position, $14.54 size $2.89 M755 for 5-position, /16" port, Viton seals $34.07 3- and 5-way Nozzle Bodies with Tab for Boom Clamp M49K7 PMHF12DCVV 5-position, 1-in. clamp $14.54 M765 for 1-in. pipe size $2.89 12-psi check valve with Viton (16 open/12 close) 1 PM42W7 3-position, /2. clamp $16.60$7.06 ingle Drop NozzlePM42Y7 Body for Wet3-position, Boomvalve 3/4.with PMHF15DCVV 15-psi check clampViton (22 open/15 close) $14.56$7.80 1/Nozzle PM42K7 3-position, 1-in.for clamp $14.59 2-in. pipe size $2.89 M745 3- and 5-way for Bodies with Tab Boom Clamp ush-to-connect Bodies and 3Caps 4. clamp PM49Y7 5-position, / $14.54 1/2. clamp 3 PM42W7 3-position, $16.60 $2.89 M755 for /4-in. pipe size PM49K7 5-position, 1-in. clamp $14.54 3 sh-to-Connect nozzle bodies and caps are commonly used in starter fertilizer 4. clamp 3-position, $14.56 M765 PM42Y7 for 1-in. pipe sizeBody/for $2.89 Single Drop Nozzle Wet Boom

plications.

NozzlePM745 bodies3-position, are available with push-to-connect by push-to PM42K7 1-in. clamp $14.59 pipe size $2.89 for 1/2-in.

3/4. clamp 3/4-in. nnector or push-to-connect byforbayonet for use with either 1/4" or 3/8" OD, PM49Y7 $14.54 pipe size $2.89 PM755 5-position, ush-to-connect and Caps PM765 Bodies for 1-in. pipe size PM49K7polyethylene 5-position, 1-in. clamp ear low-density tubing.

Utilize the push-to-connect caps with $2.89$14.54 Single Drop Nozzle Body for Wet Boom ush-to-Connect nozzle bodies and caps areatcommonly used in starter fertilizer ow-regulating disc for precision metering the nozzle.

1/2-in. pipeBodies Push-to-connect and Caps size with $2.89 PM745 for are pplications.

Nozzle bodies available push-to-connect by push-to UMBER DESCRIPTION Push-to-Connect nozzle bodies commonly fertilizerNOW$2.89 1/4" in 3/8" OD, pipe size and for 3/4-in. orstarter onnectorPM755 or push-to-connect by bayonet forcaps useare with eitherused applications. bodies available with push-to-connect by push-to sh-to-Connect PM765Caps for Nozzle 1-in.tubing. pipe sizeare $2.89 near low-density polyethylene Utilize the push-to-connect caps with connector or push-to-connect by bayonet for use with either 1/4" or 3/8" OD, 1 4“ Cap w/gasket M42000060 Push to Connect (PTC), $3.97 / flow-regulating linear disc low-density for precision metering at the nozzle. polyethylene tubing.

Utilize the push-to-connect caps with

$3.97 M42000061 Push to Connect disc (PTC), /8“ Cap a flow-regulating for 3precision metering Push-to-connect Bodies andw/gasket Capsat the nozzle.

NUMBER DESCRIPTION NOW sh-to-Connect Nozzle Bodies NUMBER nozzleDESCRIPTION NOW Push-to-Connect bodies and caps are commonly used in starter fertilizer 1 ush-to-Connect Caps 4 " nozzle body, 4 PSI M4247NB119 Push to ConnectCaps (PTC), to Bayonet / $8.50 Push-to-Connect applications.

Nozzle bodies are available with push-to-connect by push-to 1/4“ Cap 11 M42000060 Push Push toConnect Connect (PTC), w/gasket $3.97 PM42000060 Push to Connect (PTC), w/gasket $3.97 /4/“4"Cap nozzle body, 8 PSI M4247NB129 to (PTC), to Bayonet 1 3 connectorPM42000061 or push-to-connect by bayonet for use with either /4" or /8" OD,$8.50 3/8“ Cap w/gasket $3.97 Push to Connect (PTC), 3 3/8" nozzle body, 4 PSI 8“ Cap w/gasket $3.97 M42000061 PushtotoConnect Connect (PTC),totubing. /Bayonet $8.50 M4247NB111 Push (PTC), linear low-density polyethylene Utilize the push-to-connect caps with Push-to-Connect Nozzle Bodies 3 ush-to-Connect Nozzle Bodies " nozzle body, 8 PSI4 PSI M4247NB121 Push to Connect (PTC), to Bayonet $8.50 1/4"nozzle. a flow-regulating disc for precision metering at the nozzle body, PM4247NB119 Push to Connect (PTC), to/8Bayonet $8.50 1/4" nozzle 1/4" nozzle body, 4 PSI M4247NB119 Push Push Connect (PTC), Bayonet /4" nozzle $8.50 8 PSI PM4247NB129 Push to Connect (PTC), to 1Bayonet $8.50 body, 4 PSIbody, $12.56 M4247NC119 totoConnect (PTC), totoPTC NUMBERPush DESCRIPTION NOW 3/8" nozzle body, 4 PSI $8.50 PM4247NB111 Push to Connect (PTC), to 1Bayonet 1 4 " nozzle body, 8 PSI M4247NB129 to Connect (PTC), to Bayonet / $8.50 8 PSI M4247NC129 Push to Connect (PTC), to PTC /4" nozzle body, $12.56 Push-to-Connect Caps Push to Connect (PTC), to 3Bayonet 3/8" nozzle body, 8 PSI PM4247NB121 $8.50 3/8" nozzle body, PSI $8.50 M4247NB111 Push PushtotoConnect Connect(PTC), (PTC),totoPTC Bayonet /8" 1nozzle PSI 44PSI $12.56 M4247NC111 1/4“to " nozzle4body, $12.56 $3.97 PM4247NC119 to Connect (PTC), PTCw/gasket /4body, PM42000060 Push toPush Connect (PTC), Cap 3/8" 1nozzle body, 8 PSI 3 M4247NB121 Push to Connect (PTC), to Bayonet $8.50 PSI 8 PSI " nozzle8body, M4247NC121 Push to Connect (PTC), to (PTC), PTC(PTC), /38/"8“nozzle $12.56 PM4247NC129 to Connect to PTC /4body, $12.56 Cap w/gasket $3.97 PM42000061 Push toPush Connect 3/8" nozzle body, 4 PSI 1 $12.56 PM4247NC111 Push to Connect (PTC), to PTC $12.56 M4247NC119 Push to Connect (PTC), to PTC /4" nozzle body, 4 PSI Push-to-Connect Nozzle Bodies PM4247NC121 Push to Connect (PTC), to PTC 3/8" nozzle body, 8 PSI $12.56 1/4" readed Single Nozzle Body with DCV nozzle body, 8 PSIbody, 4 PSI M4247NC129 Push to Connect (PTC), to(PTC), PTC $12.56 1/4" nozzle PM4247NB119 Push to Connect to Bayonet $8.50 3 nozzle 4 PSIbody, 8 PSI $12.56 M4247NC111 Push to Connect (PTC), to(PTC), PTC /8"Bayonet 1DCV Threaded Single Nozzle Body with body, PM4247NB129 Push to Connect to /4" nozzle $8.50 3/8" nozzle body, UMBER DESCRIPTION NOW 3 8 PSI M4247NC121 Push to Connect (PTC), to PTC $12.56 $8.50 PM4247NB111 Push to Connect (PTC), to Bayonet /8" nozzle body, 4 PSI NUMBER DESCRIPTION NOW M402CPV01 XT SprayPush Tip to Check Valve $9.91 PM4247NB121 Connect (PTC), to Bayonet 3/8" nozzle body, 8 PSI $8.50

PM402CPV01 XT Spray Tip Check Valve hreaded Single Nozzle Body(PTC), with DCV PM4247NC119 Push to Connect to PTC / " nozzle body, 4 PSI 1 4

PM4247NC129 Push to Connect (PTC), to PTC 1/4" nozzle body, 8 PSI NUMBER PM4247NC111 DESCRIPTION Push to Connect (PTC), to PTC 3/8" nozzle body, 4 PSI M402CPV01 XT Spray TiptoCheck Valve PM4247NC121 Push Connect (PTC), to PTC 3/8" nozzle body, 8 PSI

$9.91

$12.56 $12.56 NOW $12.56 $9.91 $12.56

Threaded Single Nozzle Body with DCV

martindeerline.com 1.877.627.8468

NUMBER PM402CPV01

DESCRIPTION XT Spray Tip Check Valve

NOW $9.91

Prices in effect until April 30, 2014

Ultra Low-drift Air Quick-Change Nozzle

$8.36/ea.

Guardian Air Twin Quick-Change Nozzle

$8.36/ea.

Low-drift Air Quick-Change Nozzle

$7.93/ea.

Guardian Quick-Change Nozzle

$0.00/ea.

martindeerline.com 1.877.627.8468

Sprayer Parts Cast-Iron Centrifugal Pumps ■

■

■

Pressures up to 180 psi Cast-iron for durability Primarily for self-propelled and high-performance sprayers NUMBER PM9302CHM4C PM9302CHM1C PM9303CHM4C PM9303CHM1C PM9304CHM1C PM9304CHM5C PM9006CO PM9016CO PM9008CO PM9203C PM9203CR PM9303CH1CBU

DESCRIPTION 4-12 gpm, centrifugal, hydraulic drive 11 gpm, hydraulic motor driven, 11/4 in. x 1 in.

7 gpm, hydraulic motor driven, 11/2 in. x 11/4 in.

10 gpm, hydraulic motor driven, 11/2 in. x 11/4 in.

10 gpm, hydraulic motor driven, 2 in. x 11/2 in.

15 gpm, hydraulic motor driven, 2 in. x 11/2 in.

540 rpm, PTO mount, gear driven 540 rpm, solid shaft, gear driven 1,000 rpm, PTO mount, gear driven, 21 spline Cast, pedestal mount, 11/2 in. x 11/4 in.

Cast, pedestal, reverse rotation, 11/2 in. x 11/4 in.

11 gpm, hydraulic motor driven, 11/2 in. x 11/2 in., universal flange PM9306CH1CBU 11 gpm, hydraulic motor driven, 2 in. x 11/2 in., universal flange PM9306CH5CBU 15 gpm, hydraulic motor driven, 2 in. x 11/2 in., universal flange

NOW $858.90 $858.90 $887.43 $887.43 $1,143.30 $1,143.30 $975.69 $962.73 $1,012.13 $404.04 $413.76 $1,013.74 $1,165.97 $1,165.97

Stainless Steel Centrifugal Pumps ■

■

■

Pressures up to 170 psi Stainless steel for maximum wear For skid-mount or self-propelled sprayers

NUMBER PM206042S

DESCRIPTION Stainless steel, 18 gpm, hydraulic-driven, centrifugal pump – 2 in. x 11/2 in. Direct replacement for AN206042 PM303707S Stainless steel, 14 gpm, hydraulic-driven, centrifugual pump – 11/2 in. x 11/4 in. Direct replacement for AN303707 PM9203S Stainless steel, pedestal-mount centrifugal pump – 11/2 in. x 11/4 in.

PM9303SHM1C Stainless steel, 13 gpm, hydraulic-driven, centrifugal pump – 11/2 in. x 11/4 in.

PM9306SHM5C Stainless steel, 17 gpm, hydraulic-driven, centrifugal pump – 2 in. x 11/2 in.

NOW $ 1,815.90 $ 1,893.50 $ 911.73 $ 1,626.69 $ 1,923.86

Silicon-Carbide Seal Kit ■

■

■

■

More resistant to abrasion than ceramic More likely to survive dry runs than ceramic Silicon-carbide seal faces work together to provide excellent thermal conductivity for dry running Pressure-balanced design allows for lighter spring loads, lower running temperatures and longer seal life NUMBER AN206043

DESCRIPTION Silicon-carbide seal kit

NOW $ 163.56

Prices in effect until April 30, 2014

Add More Add More Sprayer Attachments

Add More

Direct Injection

Direct

Operators can now accurately inject chemicals into the carrier flow without having to mix them in the solution tank. This elminates the need to rinse the solution tank prior ction to switching – resulting in easierhaving changeover between crops and chemicals, now accurately inject chemicalschemicals into the carrier flow without to quicker load the times andtofewer, wasted chemical inputs. Available on John Deere 4940 e solution tank. This elminates need rinse the solution tank prior Self-Propelled Sprayers.between Comingcrops soonand for models R4030 and R4038. emicals – resulting in easier changeover chemicals, mes and fewer, wasted chemical inputs. Available on John Deere 4940 NOW NUMBER DESCRIPTION Sprayers. Coming soon for models R4030 and R4038.

$17,166.47 BN909782 One high-volume pump, one set of tanks (100-gal. system) DESCRIPTION $20,497.56 BN909780 One high-volume pump, two setsNOW of tanks (200-gal. system) $17,166.47 One high-volume pump, one set of tanks (100-gal. system) $26,607.66 BN909781 Two high-volume pumps, two sets of tanks (200-gal. system) One high-volume pump, two sets of tanks (200-gal. system) $8,965.79 BN400630 One low-volume pump, small$20,497.56 tank (35-gal. system) $26,607.66 wo high-volume pumps, two sets of tanks (200-gal. system) *Prices Include Parts and Labor $8,965.79 One low-volume pump, small tank (35-gal. system)

Boom Cleanout Kit

*Prices Include Parts and Labor

Simply mount this kit on the ends of each boom section, then open to flush the system and avoid any clogging. Use with 1-inch plumbing. his kit on the ends of each boom section, then open to flush the NUMBER NOW id any clogging. Use with 1-inchAPPLICATION plumbing.

nout Kit

BN202517

APPLICATION All John Deere Sprayers

All John Deere Sprayers

NOW $692.91

$692.91

NUMBE BN9097 BN9097 BN9097 BN4006

Boom

Simply m system a

NUMBE BN2025

*Prices Include Parts and Labor

*Prices Include Parts and Labor

BoomTrac Pro™ Height Control System

Boom

A proven way to dramatically reduce spray drift and skips. This system increases Pro™ Height application Control System accuracy and efficiency by maintaining a more consistant boom height o dramatically reduce spray drift and skips. This system increases above the crop. uracy and efficiency by maintaining a more consistant boom height NUMBER DESCRIPTION MODEL NOW .

SCRIPTION ensor System* ensor System* ensor System

Operato mix them to switc quicker Self-Pro

BN202557 2-Sensor System* MODEL BN202520 2-Sensor System* 4730 and 4830 BN909527 4920 5-Sensor System and 4930

*For upgrading a 3-Sensor System to a 5-Sensor system

4940

4730 and 4830 NOW 4920 and 4930 $2,547.87 4940 $2,547.87

$2,547.87 $2,547.87 $16,173.31

$16,173.31

r System to a 5-Sensor system

SERVICE TIPS: Are You Ready For Spring? Is your Sprayer Ready For Spraying?

11 PRESEASON INSPECTION POINTS FOR YOUR SPRAYER: 1 Drain Winterizing Fluid

7 Grease All Points including Suspension

2 Flush Solution, Agitation, & Rinse Systems

8 Check Planetary Hub Oil & Condition

3 Check Flow Meter for Free Operation

9 Change Engine Oil & Filter

4 Check All Nozzles for Plugging 5 Ensure Strainers are Free of all Debris

10 Check Hydraulic Oil & Condition 11 Install Latest AMS Software

6 Change Cab Filters

martindeerline.com 1.877.627.8468

A proven applicat above th

NUMBE BN2025 BN2025 BN9095

*For upgradin

Add More Tractor Attachments

Add More

Maximize your tractor’s potential

Maximize your tractor’s potential

ction

now accurately inject chemicals into the carrier flow without having to e solution tank. This elminates the need to rinse the solution tank prior hemicals – resulting in easier changeover between crops and chemicals, mes and fewer, wasted chemical inputs. Available on John Deere 4940 Sprayers. Coming soon for models R4030 and R4038.

DESCRIPTION One high-volume pump, one set of tanks (100-gal. system) One high-volume pump, two sets of tanks (200-gal. system) Two high-volume pumps, two sets of tanks (200-gal. system) One low-volume pump, small tank (35-gal. system)

NOW $17,166.47 $20,497.56 $26,607.66 $8,965.79

*Prices Include Parts and Labor

anout Kit

this kit on the ends of each boom section, then open to flush the oid any clogging. Use with 1-inch plumbing.

APPLICATION All John Deere Sprayers

NOW

With thousands of attachments to $692.91 choose from, it’s never been easier to Include Parts and Labor With thousands of attachments to *Prices add more productivity, more convenience choose from, it’s never been easier toand more overall value to your operation. add more productivity, more convenience From sub-compact utility to four-wheeland more overall value to your operation.

Pro™ Height Control System drive tractors, John Deere attachments From sub-compact utility to four-wheelcompatible with multiple models, to dramatically reduce spray drift and skips.

This systemare increases drive tractors, John Deere attachments curacy and efficiency by maintaining a more consistant fitting boom every heightneed and enhancing your are compatible with multiple models, tractor for maximum performance. p. fitting every need and enhancing your tractor for maximum ESCRIPTION MODEL performance. Add More NOW potential to what you can Sensor System* 4730 and 4830 $2,547.87 do with John Deere attachments.

Add More potential to what you can Sensor System* 4920 and 4930 $2,547.87 do with John Deere attachments.

Sensor System

4940

sor System to a 5-Sensor system

$16,173.31 Available for most cab tractors.

Add more convenien Mounting Bracket Ki Add more convenience with our With the ability to m Mounting Bracket Kit with Ram Mounts.controls and displays With the ability to mount and adjust keyyour cab to fit the wa controls and displays, you can customize your cab to fit the way you work!

RE566705

NOW $28.30 NEW

Twin USB Charging Adapter

Tow Cable Kits

The tow cable is suggested for pulling a 9R Series Tracor in time of assistance.

The tow cable is connected to the front drawbar pin and is available as a field-installed option.

The tow cable is suggested for pulling a 9R Series Tracor in time of assistance.

The tow cable is connected to the front drawbar pin and is available as a field-installed option.

NUMBER APPLICATION NOW

Tow Cable Kits NUMBER RE311210 RE311211 RE315780 RE269431

RE311210 9R Wheeled APPLICATION NOW RE311211 9RT 9R Wheeled $2,648.59 RE315780 9030 Wheeled 9RT $2,924.36 RE269431 9000 and 9020 Tractors 9030 Wheeled $2,701.34 complete installation 9000 and 9020 Tractors *See parts department for any additional hardware required to$2,701.34

*See parts department for any additional hardware required to complete installation

Prices in effect until April 30, 2014

$2,648.59 $2,924.36 $2,701.34 $2,701.34

Add More Tractor Attachments

Add More

iMatch™ AutoHitch

Hooking up implements with an iMatch AutoHitch is as easy as backing up to the implement, hydraulically lifting the unit and securing the latches. Simple as that. ion See us to getinto yourthe AutoHitch today. ow accurately inject chemicals carrier flow without having to

solution tank. This elminates need to rinse the solution tank prior NUMBER the APPLICATION micals – resulting inLVB25675 easier changeover between crops chemicals, Fits 2320, 2520, 2720, 3005,and 3032E, 3038E, 3320, 3520, 3720, es and fewer, wasted chemical4120, inputs.

Available on4720 John Deere 4940 4320, 4520 and LVB25676 FitsR4030 2320, 2520, 2720, 3005, 3032E, 3038E, 3320, 3520, 3720, prayers. Coming soon for models and R4038.

4120 and 4320 NOW Fits 3720, 4120, 4320, 4520 and 4720

NUMBER LVB25675

$333.33

LVB25676

*Prices Include Parts and Labor

out Kit

NOW $340.93 $340.93 $632.60 $797.47 $785.03

ore convenience with our John DeereKit Sprayers $692.91 ng Bracket with Ram Mounts. *Prices Include Parts and Labor e ability to mount and adjust key s and displays, you can customize Mounting Bracket Kit Accessory b to fit the way youThe work! new mounting bracket kit allows the operator to mount, adjust and position

ro™ Height Control System key controls and displays within the cab for maximum accessibility without

compromising visibility.

Johnincreases Deere design can be used in multiple dramatically reduce spray drift and skips. The Thisnew system and tailored to the specific racy and efficiencyconfigurations by maintaining a more consistant boommachine height and task.

CRIPTION nsor System* nsor System* nsor System

ystem to a 5-Sensor system

NUMBER DESCRIPTION RE343680MODEL Accessory Mounting Bracket Kit**

4730 and 4830

APPLICATION Works with Utility, Row Crop, and Four NOW Wheel Drive cab tractors, or wherever $2,547.87 additional monitors are needed

Hooking up implement, See us to ge

NOW $595.90

SCRIPTION LVB25677 $346.51 $17,166.47 e high-volume pump, one set of tanks (100-gal. system) $20,497.56 e high-volume pump, two sets of tanks (200-gal. system) Quick-Hitch $26,607.66 o high-volume pumps, two sets of tanks (200-gal. system) high-strength $8,965.79 to provide long life and handle e low-volume pump,Made small from tank (35-gal. system)tubular steel. Box-welded the increased lift capacity of today’s high-performance tractors.

NUMBER DESCRIPTION PMQH100 Black Quick-Hitch. Fits Category I implements.

PMQH101 Green Quick-Hitch. Fits Category I implements. is kit on the ends of each boom section, then open to flush the TY16042 Green Quick-Hitch. Fits Category II implements. d any clogging. Use with 1-inch plumbing.

TY16043 Green Quick-Hitch. Fits Category III implements.

TY16044 Green Quick-Hitch. Fits Category III-N (narrow) implements.

PLICATION NOW

iMatch™

NOW $59.93

LVB25677

Quick-H

Made from the increas NUMBER PMQH100 PMQH101 TY16042 TY16043 TY16044

Accessor

The new mo key controls compromis configuratio NUMBER RE343680

4920R343682 and 4930 $2,547.87 **RE343680 contains: (1), R343683 (2), RE343685 (2), and necessary hardware.

4940

Instructional Seat

$16,173.31

**RE343680 conta

This top-quality seat comes complete with a retractable seat belt that bolts securely to the cab. Seat features rear netting for additional cab storage.

NUMBER RE192707

RE195932 LVB25717 AL173569

APPLICATION Fits 7720-7920, 8100-8400, * 8100T-8400T, 8110-8410, 8110T-8410T, 8120-8520 and 8120T-8520T Row-Crop Tractors; and 9300T-9400T and 9320T-9520T 4WD Tractors; 4940 Sprayer, 4730-4930 Sprayers, 4720/4920 Sprayer Fits 9100-9400 and 9120-9620 4WD Tractors Fits 5M and 5025, 4630 Sprayer, 5E, 5MH, 5025 HC, 5025 Orchard Series Tractors 6020, 6030, 6030 Prem, 7030, 7030 Prem, Current 6M Series Tractors

NOW $674.66

$606.55 $610.29 $685.83

*For the following tractors, also order (1) R184251 bracket, (1) RE174406 upholstery, and (1) R131751 bracket; 8100 (-010005), 8200 (-010002), 8300 (-010004) and 8400 (-010004). �������

martindeerline.com 1.877.627.8468

Instructi

This top-qu to the cab.

NUMBER RE192707

RE195932 LVB25717 AL173569

*For the following (-010002), 8300 (-0

Filters

dia lute will tting

John Deere Oil Filters John Deere oil filters are expertly engineered with even pleats and filtration media spacing to catch small particles like dirt and other contaminants before they pollute your engine. If your filter doesn’t have adequate dirt-holding capacity, dirty oil will start to bypass the filter before the change interval. This could lead to debris getting through to your engine and causing unnecessary wear and tear.

NOW

NUMBER DESCRIPTION Engine Oil Filters* AR26350 Oil Filter AR43634 Oil Filter

$7.08 14.49

7.08 20.21

62.21 24.30

T19044 RE57394

Oil Filter Oil Filter

RE58935 RE509672

Oil Filter Oil Filter

NOW

Two-Cylinders, 10 and 20 Series Row Crop Tractors 30 and 40 Series Row Crop Tractors, 30 Series 4WD, 6600 and 7700 Combines Small Frame 7000 Series Tractors 50, 55, 60, Large Frame 7000, 8000, 8010 Series Row Crop Tractors 50, 60, 70 Series 4WD; 9000, 9010, 9050 Series Combines 9000, 9020 Series 4WD; 7000, 7050 Series SPFH 20, 30, R Series Row Crop Tractors 9660, 9760, 9670, 9770, S660, S670 Combines

$7.08 $14.49 $7.08 $20.21

$62.21 $24.30

*Contact Martin Deerline for application specific to your equipment.

John Deere Air Filters

ants r

John Deere air filters are another high-quality line of defense against contaminants invading your engine. They reduce engine wear by removing dust, dirt, and other pollutants from intake air. They are highly efficient when it comes to trapping unwanted particles.

NOW

55.43

NUMBER DESCRIPTION Engine Air Filters* AR79679 Primary

30.32

AR79680

Secondary

71.47

AR80652

Primary

35.33

AR80653

Secondary

RE210102 RE210103 AH222225 AH212295 HXE11090 HXE11091

Primary Secondary Primary Secondary Primary Secondary

19.45 78.35 75.33 07.58 40.24 63.41

APPLICATION

PLUS

Act Now

12% Off John Deere * Filters Expires Mar.31, 2014 *

APPLICATION

NOW

30, 40, 50 and 55 Small Frame Row Crop Series Tractors; 6620, 7720 Combines 30, 40, 50 and 55 Small Frame Row Crop Series Tractors; 6620, 7720 Combines 40, 50, 55 Large Frame Row Crop Series Tractors 8820 and 9000 Series Combines 40, 50, 55 Large Frame Row Crop Series Tractors 8820 and 9000 Series Combines 8030 and 5 Series Tractors 4930 Sprayer 8030 and 5 Series Tractors 4930 Sprayer 70 Series and S550 Combines 70 Series and S550 Combines S660, S670, S680, S690 Combines S660, S670, S680, S690 Combines

*Contact Martin Deerline for application specific to your equipment.

71

Prices in effect until April 30, 2014

$55.43 $30.32 $71.47 $35.33 $119.45 $78.35 $175.33 $107.58 $240.24 $163.41

Filters

PLUS

John Deere Fuel Filters When it comes to your fuel, water is the number one enemy. That’s why John Deere fuel filters are not only designed to trap water, they’re designed to repel it. Our filters have coated media that keeps water out, preventing rust and microbial growth that could damage your fuel and lead to poor fuel economy.

NUMBER DESCRIPTION Fuel Filters*

APPLICATION

AR50041 AR86745

20, 30, and 40 Series Row Crop Tractors 6620, 7720, 8820, 9000 Series, 9010 Series Combines; 50,55, 60, 8000 Row Crop Series Tractors 5M’s, 6D’s, 7030’s Series Tractors; 9570 and S550 Combines 60, 70, and S Series Combines; 9230 4WD; 8030 and R Series Row Crop Tractors 7000 Series SPFH; 9000 and 9020 Series 4WD Tractors 7550 and 7750 SPFH; 30 Series 4WD Tractors; 9870 Combine

Fuel Filter Fuel Filter

RE529643

Primary Fuel Filter

RE525523

Fuel Filter Service Kit

RE507284

Fuel Filter

RE532952

Primary Fuel Filter

NOW $15.24 $25.95 $40.78

AL169573 Hydraulic Filter RE174130 Hydraulic Filter RE210857 Hydraulic Filter RE310653 Hydraulic Filter AH128449 Hydraulic Filter

*Contact Martin Deerline for application specific to your equipment.

John Dee

When it com fuel filters ar filters have c that could da

NUMBER D Fuel Filters*

$46.21

RE529643

P

$123.90

RE525523

F

RE507284

F

RE532952

P

$138.50

Our hydraulic filters are designed specifically to protect John Deere hydraulic systems from component wear and hydraulic surge flow. They keep contaminants out and prevent sludge and acid from damaging your machine.�

10, 20 and 30 Series Row Crop Tractors 40, 50, 55 and 60 Series Row Crop Tractors; 30, 40, amd 50 Series 4WD 6030 and Small Frame 7030 Series Row Crop Tractors 8000, 8010, and 8020 Series Row Crop Tractors; 9000, 9020, and 9030 Series 4WD 8030 and 8R Series Row Crop Tractors 7R Series Row Crop Tractors 9000, 9010, 9050, 9060, 9070, and S Series Combines; 7000, 7050, and 7080 Series Self Propelled Forage Harvesters

*

F F

John Deere Hydraulic Filters

APPLICATION

12% Off John Deere * Filters Expires Mar.31, 2014

AR50041 AR86745

*Contact Martin Deerline for application specific to your equipment.

NUMBER DESCRIPTION Hydraulic Filters* AR75603 Hydraulic Filter AR94510 Hydraulic Filter

Act Now

NOW $9.55 $41.46

*Contact Martin Dee

John Deer

Our hydraulic from compon prevent sludg

$113.53 $95.92

NUMBER D Hydraulic Filt AR75603 Hyd AR94510 Hyd

$93.24 $102.12 $65.90

AL169573 Hyd RE174130 Hyd

RE210857 Hyd RE310653 Hyd AH128449 Hyd

*Contact Martin Dee

martindeerline.com 1.877.627.8468

DEF? st is DEF?

m to remove nitrogen oxides (NOx) from engine exhaust. emove nitrogen oxides (NOx) from engine exhaust. omponents of the SCR system include the SCR catalyst, the nents of the SCR system include the SCR catalyst, the

nto the exhaust stream prior to the SCR catalyst. NOx is e exhaust prior the through SCR catalyst.

NOxreaction. is nto harmlessstream nitrogen andto water a chemical

rmless nitrogen and water through a chemical reaction.

percent high purity urea and 67.5 percent deionized water. nt highthe purity urea and 67.5 percent ovides lowest possible freeze point.deionized water.

es the lowest possible freeze point.

s

c orrosive al

sive

What is DEF?

What is DEF? (SCR) system to remove nitrogen oxides (NOx) from engine exhaust.

The main components of the SCR system include the SCR catalyst, the is injected into the exhaust stream prior to the SCR catalyst. NOx is converted into harmless nitrogen and water through a chemical reaction.

DEF is 32.5 percent high purity urea and 67.5 percent deionized water.

This ratio provides the lowest possible freeze point.

DEF is also: – Colorless – – Nontoxic – Slightly corrosive – 9.1 lb/gal

Many – – – – – – –

Urea Aqueo AUS3 AdBlu NOx r ARLA

AUS32 is a AdBlue is a Automotiv

US and

Many names and DEF Many andterms termsare areused usedforfor DEF Urea –– Urea Aqueous urea solution –– Aqueous urea solution – AUS32® –– AUS32® AdBlue® –– AdBlue® NOx reduction agent –– NOx agent ARLAreduction 32™ –– ARLA 32™ –AUS32 is a registered trademark of GBZI LTD. AdBlueisisaaregistered registered trademark German Association of the AUS32 trademarkofofVDA, GBZIthe LTD. Automotive Industry.

AdBlue is a registered trademark of VDA, the German Association of the Automotive Industry.

US and Canada

US and Canada PART SIZE SWDEF025 9.46 L (2.5 GAL.) SWDEF055 208 L (55 GAL.)

Prices in effect until April 30, 2014

NOW $11.58 $198.38

What every DEF user needs to know.

Diesel exhaust fluid is required in engines with SCR systems. In an effort to ensure every John Deere customer enjoys a positive experience, we want you to know the benefits as well as the cautions of using DEF.

What happens when DEF freezes?

– DEF begins to freeze at 12° F (-11° C) – Even if DEF freezes solid, it can be used when thawed.

– DEF expands approximately 7 percent by volume when frozen. Allow room for expansion in storage containers and make sure residual DEF is removed from pumps, nozzles, and hoses. Do not use as – On the engine or equipment the DEF tank itself is equipped with a heating element that utilizes engine coolant to thaw DEF in temperatures below 12° F (-11° C). The engine can be operated immediately and throughout the DEF tank thawing process.

– Do not add any chemicals or additives to DEF in an effort to prevent freezing. Adding chemicals can damage the aftertreatment system.

– DEF consumption is primarily based on engine loads and engine speed.

– –

normal service checks.

Is DEF harmful to skin?

– DEF is not harmful to handle but requires care.

– Avoid prolonged contact with skin. In case of accidental contact, wash skin immediately with soap and water.

Is DEF compatible with metals and other materials?

– DEF should always be transported and stored in appropriate containers.

– Only use containers made of DEF compatible stainless steel, highdensity polyethylene or polypropylene.

– DEF can be corrosive to certain materials such as steel, iron, zinc, nickel, copper, aluminum, and magnesium.

– DEF contamination, even with trace amounts of metals, can damage the catalyst in the SCR system.

DEF should be stored in a sealed container, in the shade where possible, and out of extreme temperatures. DEF freezes at 12° F (-11° C), but may be used upon thawing. Exposure to high heat for sustained periods can degrade the quality of DEF. When stored properly, DEF has shelf life that is similar to oils and coolants.

Recommended conditions for maintaining DEF quality – Store in sealed containers to avoid contamination and evaporation.

colored cap embossed with the DEF symbol.

– IMPORTANT: Never put DEF in a diesel fuel tank.

Warranty – The John Deere warranty covers only defects in material and workmanship as manufactured and sold by John Deere. Failures caused by poor quality DEF of any type cannot be compensated under our warranty.

– IMPORTANT: Agricultural grade urea or UAN (urea ammonium nitrate) should never be used in place of DEF – IMPORTANT: DEF should never be added to the diesel fuel tank.

–

DEF should be crystal clear with a light ammonia smell. If DEF appears cloudy, has a colored tint, or has a profound ammonia smell, it should not be used.

Storage information provided is for reference and is to be used as a guideline only.

Actual DEF shelf life is determined by many variables. It is recommended to keep DEF in sealed containers and out of high heat for sustained periods. DEF should be purchased in amounts that can be consumed in a reasonable amount of time.

CAUTION: DEF contains urea. Do not get DEF in eyes. In case of contact, immediately In the event DEF is ingested, contact a physician immediately. Reference the Materials Safety Data Sheet (MSDS) for additional information.

IMPORTANT: It is unlawful to tamper with or remove any component of the aftertreatment system. It is also unlawful to use DEF that does not meet the required

– IMPORTANT: Diesel fuel should never be added to the DEF tank.

This list of considerations is not intended to be all-inclusive.

direct sunlight.

DEF can damage the aftertreatment system.

martindeerline.com 1.877.627.8468

n

T R U ST E D B R A N D S

n

LO C A L A DV I S O R S

n

PAC K AG E D S O L U T I O N S

Upcoming Martin Deerline CLINICS: March 26th Sprayer Clinic Wetaskiwin n April 3rd Air Seeder Clinic Wetaskiwin n April 8th Air Seeder Clinic Barrhead n

I’m more than an expert in my field.

I’m an expert in yours.

April 9th Optimization Clinic Mayerthorpe n

April 10th Sprayer & Air Seeder Clinic West Edmonton n

Your day may not end before the sun goes down.

And at Martin Deerline, neither does ours.

April 15th Sprayer Clinic Barrhead n

April 17th Sprayer Clinic Westlock n

April 22nd Sprayer Clinic High Prairie n

April TBA Falher n

CALL TO RESERVE YOUR SPOT TODAY!

martindeerline.com 1.877.627.8468 WEST EDMONTON 17104 -118 Ave. BARRHEAD n FALHER n HIGH PRAIRIE MAYERTHORPE n WARBURG WESTLOCK n WETASKIWIN TRIED, TESTED AND RECOMMENDED * Prices are suggested retail prices only and are subject to change without notice at any time.

Dealer may sell for less. Taxes, setup, delivery, freight and preparation charges not included.

Attachments and implements sold separately. See dealer for details. Prices in effect until Apr.30, 2014