Victony AC1200 Setup

Victony AC1200 Manual Setup full instructions

To complete the Victony AC1200 Setup on Web browser, follow the steps below:

●Bring your Victony wifi extender and router into the same room to begin.

●Turn on your extender and router.

●Wait a few seconds and examine the LED light to see if it is stable or solid green.

●Connect to the Victony AC1200 extender setup using your laptop, PC, or mobile device's wifi settings.

●There's no need for them to enter a password the first time they connect to your device.

●After connecting, they displayed no internet access and then opened any web browser.

●In the top address bar, enter http://AP.Setup or 192.168.10.

●There will only be one login window.

●Enter "admin" as your username and password.

●Select the extender to which you want to connect your router and enter your new extender setup password.

●After you've finished configuring the device, turn it off for 15-20 seconds and then back on.

● Connect your device to the Victony wifi range extender configuration, which appears in your wifi list as "SSID EXt."

● To begin, connect your Victony wifi repeater and router in the same room.

● Wait until the LED light becomes stable.

● Then, on both devices, hold down the WPS button for 5 seconds.

● The lights on both devices will blink for 15-20 seconds, indicating that the setup was successful.

● Unplug your extender and place it wherever you want.

Wavlink Extender default IP