CLEVIS THIMBLES

“PLP offers a wide range of CLEVIS THIMBLES to suit every

application and load up to 120kN”

TC-17

PLP Galvanised Clevis Thimbles are used in conjunction with PREFORMED Dead-ends on suspension-type or Dead-end insulators. The thimble is intended to provide a smooth internal contour to prevent stress concentration within the loop of a PREFORMED Dead-end.

Smooth internal contour to prevent stress concentration. - Tested to IEC standards. Includes a humpback pin. Comes with a straining eye. Galvanising to AS4680 standard.

Application Copper, Copper clad and Galvanised steel Preformed deadends (loop diameter up to 40mm)

Features

Specification

Thimble Rating Pulling Eye Rating Clevis Opening “A” 70kN 40kN 20mm

EPACT-70

PLP Aluminium Clevis Thimbles are used in conjunction with PREFORMED Dead-ends on suspension-type or Dead-end insulators. The thimble is intended to provide a smooth internal contour to prevent stress concentration within the loop of a PREFORMED Dead-end.

Application Aluminium and Aluminium clad Preformed deadends (loop diameter up to 57mm)

Features

Smooth internal contour to prevent stress concentration. Tested to IEC standards. Includes a humpback pin. Comes with a straining eye. Made with high grade aluminium alloy.

Specification

Thimble Rating Pulling Eye Rating Clevis Opening “A” 70kN 40kN 22mm

PLP Galvanised Clevis Thimbles are used in conjunction with PREFORMED Dead-ends on suspension-type or Dead-end insulators. The thimble is intended to provide a smooth internal contour to prevent stress concentration within the loop of a PREFORMED Dead-end.

Smooth internal contour to prevent stress concentration. - Tested to IEC standards. Includes a humpback pin. Comes with a straining eye. Galvanising to AS4680 standard.

Application Copper, Copper clad and Galvanised steel Preformed deadends (loop diameter up to 56mm)

Features

Specification

Thimble Rating Pulling Eye Rating Clevis Opening “A” 120kN 40kN 23.5mm

Thimble Opening “B” Thimble Radius “C” Clevis Pin Dia “D” 23.5mm 28.0mm 16mm PLP Galvanised Clevis Thimbles are used in conjunction with PREFORMED Dead-ends on suspension-type or Dead-end insulators. The thimble is intended to provide a smooth internal contour to prevent stress concentration within the loop of a PREFORMED Deadend.

Features

PLP CLEVIS THIMBLES

Smooth internal contour to prevent stress concentration. - Tested to IEC standards. Includes a humpback pin. Comes with a straining eye. Galvanising to AS4680 standard.

Application Aluminium and Aluminium clad Preformed deadends (loop diameter up to 72mm)

Specification

Thimble Rating Pulling Eye Rating Clevis Opening “A” 70kN - 22mm

Thimble Opening “B” Thimble Radius “C” Clevis Pin Dia “D” 36mm 36mm 16mm

For further Information contact

Ravinder Singh Technical Sales & Product Development Manager Email: ravinder.singh@plp.com M: +64 22 088 3669