“A straightforward guide to High Pressure Washer” There are many in the car care industry itself, who believe that high pressure washer or car washing pumps are not safe to use on cars. Numerous people also feel that they might affect the car’s paint or get it scratched. But many do not know that how the science in these machineries work. We’ll try to explain it in simple words: The Technology: A crankshaft helps the inner ignition engine to function properly in altering the linear motion to a rotating motion of the pistons. These are more of connecting links and rods for a smoother operative. These help in controlling the pressure of the water motor in terms of pressure washers. The pump usually used in these machines is Annovi reverberi Pump which is made of forged brass. It has many pressure levels and can be further controlled. 130,140 and 200 bars of pressure can be enlightened at a given time. And to clean a car with such a car washer, only 10-20 bars of pressure is needed. This is usually controlled by the washer guns and lance. The key is to have an unloader valve that helps in controlling the pressure. Many companies use ceramic coated pistons in their pressure washer which can wear out in some time and can affect the pressure as well. To ensure maximum safety, genuine ceramic pistons must be installed in the machines. they are heat absorbent and can go on for hours.
Safe procedures to using the high pressure washer
Here are some straightforward to-dos while operating these washers: • Always ensure that the doors and windows are closed before the commencement of the wash. • Always wear shoes while using the car wash equipment. The pressure from the washer can cause serious injury is case of a slip.