Use the High pressure washer to Deep Clean the Sidewalks & Pathways Even if you are in a situation of Drought or like to save water for good measure, you can still wash your car, the sidewalks, pathways, decks, roof, etc. With the use of the high pressure washer machine, you can perform the cleaning process with ease. As the pressure is high in 130-140 bars and the flow rate is low, the water consumption is low. Have you ever noted a dirty part of a sidewalk or driveway exactly next to a recently cleaned section? Seeing these areas of contrast can vibrantly demonstrate both the power and the utility of the bay area pressure washing, a process that creates an amazing clean that gets down into the gaps and channels of the concrete. Dirty sidewalks seem grey and dirty, while freshly power cleaned sidewalks with the car washing pump appear bright and much newer and fresher.
Use the Multipurpose Lance with the HRC-pro
When it comes to sidewalk cleaning, pressure washing provides the most detailed washing. But why? What’s the physics behind it? Here’s the gist, the cement literally holds onto the dirt. The rough surface consents oil, dirt, tar, and rust to ooze in and stain the element. No regular cleaning method will remove this griminess, because the chemical bonds avoid true deep-cleaning, leaving the sidewalks, drives, and park trails looking worn down. Soap and water swirls dirt around and leaves suds nearby. Chemical concrete cleaners, meanwhile, are ecologically unsafe and thus rarely ever used.