LASER TRACKER ACCESSORIES
1.5″ Probe Adapter
To help measure the location of 1.5″ SMR drift nests with a portable CMM.
1.5″ Standard SMR Lanyard Kit For use with 1.5″ standard SMRs.
0.5″ Blue Drift Nest (No Holes) For use with laser tracker SMRs.
0.5″ Vector Target Adapter
Used to locate the centre point of the shank on the surface of the object being measured. Different variants available.
1.5” Break Resistant SMR Steel ball with an aluminium insert.
Electric Vacuum Mount
Battery powered vacuum mount for use with laser trackers.
1.5″ Pin Adapter
Sizes available: 0.1″ to 1″ with 1″ offset | 4mm to 15mm with 25mm offset.
1.5″ Break Resistant Lanyard Kit For use with 1.5″ break resistant SMRs.
1.5″ Blue Drift Nest (No Holes) For use with laser tracker SMRs.
1.5″ Centre Punch
Allows you to mark out using the laser tracker with a centre punch.
1.5″ Edge Adapter
For measuring edges using 1.5″ SMRs.
0.5″ SMR Handle 4″ rubberised grip to help hold 0.5″ SMRs.
1.5” Drift Nest
1.5″ Breakproof SMR Lanyard Kit For use with 1.5″ breakproof SMRs.
1.5″ Blue Drift Nest (Holes) For use with laser tracker SMRs.
0.5” Drift Nest For use with laser tracker SMRs.
1.5″ Breakproof SMR
Solid steel ball with a 5 axis machined gold plated centre.
Precision Levelling Unit
Allows fine adjustability with a fixation clamp and offers approximately 2º of adjustment in both the X and Y directions.
Jade Remote For use with laser trackers.
1.5″ Standard SMR Steel ball with a protected glass insert.
0.5″ Breakproof SMR
Solid steel ball with a 5 axis machined gold plated centre.
3 Way Levelling Unit
Easily make horizontal fine levelling up to 10º.
Heavy Duty Metrology Short Fixed Aluminium Tripod For use with laser trackers.
0.5″ Standard SMR Steel ball with a protected glass insert.
Extension Tubes
Increase the effective stand height.
Magnetic
For use with laser trackers.
6″
Mount & Chuck