Makita New Product Release July - September 2020

NEW

PRODUCT RELEASE

JULY - SEPTEMBER 2020 GET CONNECTED | WWW.MAKITA.CO.NZ |

Since the Launch of 18V LXT in 2005, Makita has been leading the way in Cordless Tool innovation and technology. 18V LXT provides consumers with not only the largest range on one battery, it also provides consumers with the most reliable and efficient tools available.

Our vision as a Company is to provide consumers with a battery solution for all applications across Building Construction, Industrial, Outdoor Power Equipment and Commercial Cleaning Channels.

In keeping with our vision. Makita is ready to lead the way once again in 2019, we are excited to announcement the launch of our new XGT 40V battery system that will coexist with LXT and continue towards our vision of a battery solution for all applications!

Makita will continue to invest heavily in LXT, and there is a tremendous roadmap of new LXT products in the pipeline for trade users in all segments. The LXT Advantage seamlessly utilises a single battery across hundreds of products, with the ability of added power by using two 18 volt batteries in select products with X2. This is a simple concept that has revolutionised how work is done on job sites.

Scan QR code to to find out more:

www.makita.co.nz/warranty/

2

ENABLES WIRELESS CONNECTION OF MAKITA AWS™ CAPABLE TOOLS

WITH COMPATIBLE EXTRACTOR/VACUUM The introduction of a charging adaptor hasDUST enabled consumers to charge Auto-Start both LXT and XGT batteries when using theWireless XGT Transmitter charger.

4 0 V m a x L i t h i u m -+i o n B a t t e r y S e r i e s • Automatic-Start Wireless System (AWS™) utilises Bluetooth® technology for wireless power-on/off communication between tool and dust extractor • Provides intelligent communication between your tools to eliminate cords, increase productivity, and reduce noise •

POWERS 270 LXT PRODUCTS 198901-5

XGT is durable and built to perform!

Wall

designed for 40Vmax Li-Ion batteries

DHR400

AWS

// PG. 28

18V X2 LXT (36V) Brushless 40mm Advanced AVT® Rotary Hammer Kit, AWS™ ®

DHR182

AWS CAPABLE DHR282 // PG. 28 Terminal short-circuit ® 18V X2 LXT (36V) Brushless 28mm AVT ® prevention Rotary Hammer,structure AFT®, AWS™ Capable

The protection wall is provided between terminals against water and dust.

Insulating paper

// PG. 28

AWS CAPABLE

18V LXT® Brushless 18mm AVT ® Rotary Hammer, AWS™ Capable*

Film

Water-proof ring

DGA901/ DGA701

PG. 32

Cell AWS

Waterproof Triple-layer 18V X2 LXT® (36V) Brushless 230mm 9" and 7” Angle Structure Grinder, AWS™ *

prevents cell failure due to water and dust.

4-LED fuel gauge indicator

Heavy duty outer casing and cell holder Create a space to absorb DGA518 impact

Battery rail

/ DGA512

PG. 31

AWS

18V LXT® Brushless 125mm / 5" Paddle Switch Angle Grinder,structure AWS ™* Shock absorption

DVC665

// PG. 65

AWS

18V X2 LXT (36V) Brushless AWS HEPA High Rigidity Backpack VacuumBattery Rails Durable slide in battery rail that holds the withstand high power products

40Vmax Fast Charger Interchangeable Adapter

The enlarged and raised LED light provides clearer indication of charging status.

DC40RA

DHS781

AWS CAPABLE ADP10

// PG. 27

18V X2 LXT® (36V) Brushless 190/185mm Circular Saw, AWS™ Capable

DSP601

// PG. 27

AWS

LXT Li-Ion 18V X2 Compatible LXT® (36V)with Brushless 165 mm Plunge batteries Cut Saw, AWS™ Capable

3

Tool

XGT is a new system with its own tools, batteries, and chargers.

A combination of innovative tool design and higher output batteries provide a genuine solution for high demand industrial users.

Battery

Battery Charger

Digital communication

Optimum power supply system and Optimum charging system The XGT range of tools and batteries come with a built-in program, providing digital communication between the battery and tool. Allowing not only for the battery to talk with tool but also the tool to talk to the battery. Battery technology and motor engineering that work together for optimum performance.

Optimum charging system Auto maintenance system with two cooling fans for providing more optimum fast charging

Scan QR code to to find out more:

www.makita.co.nz/warranty/

40Vmax Li-ion Battery BL4025 2.5Ah

4

BL4040

4.0Ah

Charging time BL4025 BL4040

28 min 45 min

40Vmax Lithium-ion Battery Series

XGT is durable and built to perform!

Wall

designed for 40Vmax Li-Ion batteries

Terminal short-circuit prevention structure

The protection wall is provided between terminals against water and dust.

Insulating paper

Film

Water-proof ring

Cell

Waterproof Triple-layer Structure

prevents cell failure due to water and dust.

4-LED fuel gauge indicator

Heavy duty outer casing and cell holder Create a space to absorb impact

Battery rail

Shock absorption structure

High Rigidity Battery Rails Durable slide in battery rail that holds the withstand high power products

40Vmax Fast Charger The enlarged and raised LED light provides clearer indication of charging status.

DC40RA

Interchangeable Adapter

ADP10

Compatible with LXT Li-Ion batteries

5

NEW PRODUCT RELEASE

TD001GZ (TOOL ONLY)

TD001GM204 (4.0AH KIT)

40V MAX XGT® BRUSHLESS IMPACT DRIVER  Ultra compact 120mm length and lightweight at 1.0kg tool only  4-speed power selection plus 6 Assist modes (2 T-modes, 1 Wood mode, 3 Bolt modes)  Impressive 220Nm of max. fastening torque  XPT technology that protects against dust & moisture Drove ø6.5 x 120mm metal  Twin LED Job light with after-glow function

about

15 %

fastening screws

TD001GM204 INCLUDES: 40V XGT Brushless Impact Driver (TD001GZ) , 2 x 4.0Ah (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10) and Makpac Type2 CAPACITY

TD001G

115

2.5s

M4 - M8 STANDARD BOLT: M5 - M16 Predecessor Model

HIGH STRENGTH BOLT: M5 18V - M14 100 HEX SHANK

6.35 MM (1/4”) Slow Fast NO LOAD SPEED (RPM) Max / Hard / Soft 3,700 / 3,200 / 1,100 IMPACTS PER MINUTE (IPM) ・ Max / Hard / Soft 4-speed 4,400 /selector 3,600 / 1,100 One-touch MAX FASTENING TORQUE 220 N·M DIMENSIONS

120X86X250 MM WEIGHT

0.98 KGS MACHINE SCREW:

UP

・Quick-change memory mode

Work amount on a full battery charge*1 Battery: BL4025

about

800pcs

Drove 65mm coarse thread screws

VERSATILITY

Self propelled with variable speed lever

6 |

LXT® SYSTEM. ENDLESS POSSIBILITIES

160pcs

about

Drove 120mm metal fastening screws

CONVENIENCE

Quick-change memory mode allows operator to rapidly change between selected settings

POWER

High Power 220 N·m for high demand industrial users

DESIGN

Built-in LED light illuminates the work area

Get Connected

NEW PRODUCT RELEASE

GA005GZ (TOOL ONLY)

GA005GM202 (4.0AH KIT)

40V MAX XGT® BRUSHLESS 125MM ANGLE GRINDER, SLIDE SWITCH, BRAKE  High performance similar to corded class grinder  (AFT) Kickback detection, anti-restart, Electronic brake & soft start  Automatic Torque Drive increases torque to power through any cut  Extreme performance with 8,500rpm no load speed

Delivers the same power as 1,000W corded grinder

 XPT technology that protects against dust & moisture

GA005GM202 INCLUDES: 40V XGT Brushless 125mm Grinder Slide switch (GA005GZ), 2 x 4.0Ah (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10) and Makpac Type 4 WHEEL DIAMETER

HOLE DIAMETER MAX WHEEL THICKNESS NO LOAD SPEED (RPM) VIBRATION LEVEL

DIMENSIONS

WEIGHT

125 MM (5”) 22.23 MM • Large ball bearing supports the motor.7.2 MM • New switch 8,500design to reduce contact wearness.

6.5 M/S² 410X140X168 MM 2.1 KGS

High durability

No load speed:

8,500min.ˉ¹

Active Feedback sensing Technology Shuts down the tool to protect the user, if the rotation speed suddenly slows down.

New toolless wheel cover allows for fast and easy angle adjustment and installation / removal of wheel cover.

Sudden reduction of rotational speed

Auto-Stop

PUSH

Accessories

Delivers the same power as Delivers same power as DELIVERS THEthe POWER 140 1,000W corded 40 %grinder1,000W corded7grinder AND TORQUE m Cut concrete at depths of 20mm

about

GA005G

18V Predecessor Model

High durability

Work amount on a full battery charge*1 Battery: BL4040

100

High durability UP GRINDER New toolless wheel cover Active Feedback OF A CORDED sensing Technology

• Large ball bearing supports the motor.

• New switch design to reduce contact wearness.

about

Slow

No load speed:

8,500min.ˉ¹

• Large ball bearing supports the Fast No load speed: allows for fast and easy angle motor. adjustment and installation / removal Shuts down the tool to protect the user, if the • New switch design to reduce min.ˉ¹ of wheel cover. rotation speed suddenly slows down. contact wearness.

8,500

Active Feedback sensing Technology

Cutting depths: 20mm

Shuts down the tool to protect the user, if the rotation speed suddenly slows down.

Auto-Stop

40 % UP

www.makita.co.nz

Auto-Stop

PUSH

TECHNOLOGY

Larger ball bearings support the high AFT (Active Feedback sensing Technology) power XGT motor and new switch Cut concrete at depths of turns off amount if rotation speed 20mmthe motorWork on a full *1 to stop design for reducedabout contact wear. suddenly slows or wheel forced batteryischarge GA005G

140

18V Predecessor Model

100

Slow

Battery: BL4040

about Fast

7m

Cutting depths: 20mm

New toolless wheel cover allows for fast and easy angle adjustment and installation / removal of wheel cover.

Sudden reduction of rotational speed

Sudden reduction of rotational speed

DURABLE

Dust collection wheel guard

POWER

DESIGN

Makita BL Brushless motor delivers

8,500 RPM no load speed Accessories Cut concrete at depths of 20mm

Dust collection wheel guard

about

40 % UP

GA005G

140

18V Predecessor Model

100

Slow

PUSH

Work amount on a full battery charge*1

New toolless wheel cover allows for fast and easy angle adjustment and Accessories installation/removal of wheel cover Dust collection wheel guard

Battery: BL4040

about Fast

7m

Cutting depths: 20mm

LXT® SYSTEM. ENDLESS POSSIBILITIES

| 7

NEW PRODUCT RELEASE VARIABLE SPEED

GA023GZ (TOOL ONLY)

ame power as ed grinder

40V MAX XGT® BRUSHLESS 125MM ANGLE GRINDER, SLIDE SWITCH, VARIABLE SPEED, BRAKE, AWS CAPABLE

 High performance similar to corded class grinder  (AFT) Kickback detection, anti-restart and soft start  Automatic Torque Drive increases torque to power through any cut Active Extreme performance withNew 8,500rpm no load speed toolless wheel cover Feedback sensing XPT technology that protects against dust & moisture allows for fast and easy angle Technology and installation / removal  Auto-start Wireless Systemadjustment (AWS) connects to vacuum with Bluetooth uts down the tool to protect the user, if the of wheel cover.

ation speed suddenly slows down.

WHEEL DIAMETER

HOLESudden DIAMETER

reduction rotational speed MAXofWHEEL THICKNESS

NO LOAD SPEED (RPM) Auto-Stop VIBRATION LEVEL PUSH DIMENSIONS

WEIGHT

mm

125 MM (5”) 22.23 MM 7.2 MM 3,000-8,500 6.5 M/S² 410X140X168 MM 2.2 KGS

Accessories

OPTIONAL: AWSonChip Work amount a full (198901-5) battery charge*1

Dust collection wheel guard

Battery: BL4040

about

7m

Cutting depths: 20mm

Fast

VARIABLE SPEED

GA029GZ same power as ed grinder

(TOOL ONLY)

40V MAX XGT BRUSHLESS 125MM ANGLE GRINDER, PADDLE SWITCH, VARIABLE SPEED, BRAKE, AWS CAPABLE ®

 High performance similar to corded class grinder  (AFT) Kickback detection, anti-restart and soft start  Automatic Torque Drive increases torque to power through any cut New toolless wheel cover Active performance Feedback with 8,500rpm  Extreme no load speed for fast and easy angle sensing Technology  XPT technology that protects allows against dust & moisture adjustment and installation / removal Shuts down the tool to protect the user, if the  Auto-start Wireless System (AWS) connects of wheel cover. to vacuum with Bluetooth* rotation speed suddenly slows down. *AWS Chip (198901-5 ) required for Bluetooth

WHEEL DIAMETER

Sudden reduction HOLE DIAMETER of rotational speed MAX WHEEL THICKNESS NO LOADAuto-Stop SPEED (RPM) VIBRATION LEVEL

DIMENSIONS

WEIGHT

PUSH

125 MM (5”) 22.23 MM 7.2 MM 3,000-8,500 6.5 M/S² 410X140X168 MM 2.2 KGS

Delivers the same power as Delivers the same power as 1,000W corded grinder1,000W corded grinder

20mm

Accessories

Work amount on a full

OPTIONAL: AWS Chip battery charge*1 (198901-5)

Dust collection wheel guard

Battery: BL4040

about

7m

High durability New toolless wheel cover Active Feedback ball bearing supports the No load speed: allows for fast and easy angle sensing Technology• Large motor.

High durability Cutting depths: 20mm

Fast

• Large ball bearing supports the motor.

• New switch design to reduce contact wearness.

No load speed:

8,500min.ˉ¹

8,500min.ˉ¹

adjustment and installation / removal Shuts down the tool to protect the user, if the • New switch design to reduce of wheel cover. rotation speed suddenly slows down.

contact wearness.

Active Feedback sensing Technology Shuts down the tool to protect the user, if the rotation speed suddenly slows down.

Auto-Stop

8 |

TECHNOLOGY

140

18V Predecessor Model

100

40 % LXT SYSTEM. ENDLESS POSSIBILITIES ®

UP

Auto-Stop

PUSH

Larger ball bearings support the high AFT (Active Feedback sensing Technology) power XGT motor and new switch Cut concrete at depths of turns off amount if rotation speed 20mmthe motorWork on a full design for reducedabout contact wear. suddenly slows or wheel forced *1 to stop batteryischarge GA005G

Slow

Battery: BL4040

about Fast

7m

Cutting depths: 20mm

allows for fast and easy angle adjustment and installation / removal of wheel cover.

Sudden reduction of rotational speed

Sudden reduction of rotational speed

DURABLE

New toolless wheel cover

POWER

DESIGN

Makita BL Brushless motor delivers

8,500 RPM no load speed Accessories Cut concrete at depths of 20mm

Dust collection wheel guard

about

40 % UP

GA005G

140

18V Predecessor Model

100

Slow

PUSH

Work amount on a full battery charge*1

New toolless wheel cover allows for fast and easy angle adjustment and Accessories installation/removal of wheel cover Dust collection wheel guard

Battery: BL4040

about Fast

7m

Cutting depths: 20mm

Get Connected

NEW PRODUCT RELEASE

GA013GZ (TOOL ONLY)

GA013GM202 (4.0AH KIT)

40V MAX XGT® BRUSHLESS 125MM ANGLE GRINDER, PADDLE SWITCH, BRAKE  High performance similar to corded class grinder  (AFT) Kickback detection, anti-restart and soft start  Automatic Torque Drive increases torque to power through any cut  Extreme performance with 8,500rpm no load speed

Delivers the same power as 1,000W corded grinder

 XPT technology that protects against dust & moisture

GA013GM202 INCLUDES: 40V max XGT® Brushless 125mm Angle Grinder, Paddle switch, Brake (GA013GZ), 2 x 4.0Ah (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10) and Makpac Type 4 WHEEL DIAMETER

HOLE DIAMETER MAX WHEEL THICKNESS NO LOAD SPEED (RPM) VIBRATION LEVEL

DIMENSIONS

WEIGHT

125 MM (5”) 22.23 MM • Large ball bearing supports the motor.7.2 MM • New switch 8,500design to reduce contact wearness.

6.5 M/S² 410X140X168 MM 2.2 KGS

High durability

No load speed:

8,500min.ˉ¹

Active Feedback sensing Technology Shuts down the tool to protect the user, if the rotation speed suddenly slows down.

New toolless wheel cover allows for fast and easy angle adjustment and installation / removal of wheel cover.

Sudden reduction of rotational speed

Auto-Stop

PUSH

Accessories

Delivers the same power as Delivers same power as DELIVERS THEthe POWER 140 1,000W corded 40 %grinder1,000W corded7grinder AND TORQUE m Cut concrete at depths of 20mm

about

GA005G

18V Predecessor Model

High durability

Work amount on a full battery charge*1 Battery: BL4040

100

High durability UP GRINDER New toolless wheel cover Active Feedback OF A CORDED sensing Technology

• Large ball bearing supports the motor.

• New switch design to reduce contact wearness.

about

Slow

No load speed:

8,500min.ˉ¹

• Large ball bearing supports the Fast No load speed: allows for fast and easy angle motor. adjustment and installation / removal Shuts down the tool to protect the user, if the • New switch design to reduce min.ˉ¹ of wheel cover. rotation speed suddenly slows down. contact wearness.

8,500

Active Feedback sensing Technology

Cutting depths: 20mm

Shuts down the tool to protect the user, if the rotation speed suddenly slows down.

Auto-Stop

40 % UP

www.makita.co.nz

Auto-Stop

PUSH

TECHNOLOGY

Larger ball bearings support the high AFT (Active Feedback sensing Technology) power XGT motor and new switch Cut concrete at depths of turns off amount if rotation speed 20mmthe motorWork on a full *1 to stop design for reducedabout contact wear. suddenly slows or wheel forced batteryischarge GA005G

140

18V Predecessor Model

100

Slow

Battery: BL4040

about Fast

7m

Cutting depths: 20mm

New toolless wheel cover allows for fast and easy angle adjustment and installation / removal of wheel cover.

Sudden reduction of rotational speed

Sudden reduction of rotational speed

DURABLE

Dust collection wheel guard

POWER

DESIGN

Makita BL Brushless motor delivers

8,500 RPM no load speed Accessories Cut concrete at depths of 20mm

Dust collection wheel guard

about

40 % UP

GA005G

140

18V Predecessor Model

100

Slow

PUSH

Work amount on a full battery charge*1

New toolless wheel cover allows for fast and easy angle adjustment and Accessories installation/removal of wheel cover Dust collection wheel guard

Battery: BL4040

about Fast

7m

Cutting depths: 20mm

LXT® SYSTEM. ENDLESS POSSIBILITIES

| 9

NEW PRODUCT RELEASE

HR001GZ (TOOL ONLY)

HR001GM206 (4.0AH KIT)

40V MAX XGT® BRUSHLESS 28MM ROTARY HAMMER  3 mode - Rotation, Hammering & Rotation with Hammering  7.0m/s² of vibration with DX12 and AVT (Anti-Vibration Technology)  High performance thanks to 2.8j* of impact energy  One touch sliding SDS-Plus chuck enables quick and easy bit changes

Bit Type SDS-PLUS

 XPT technology that protects against dust & moisture HR001GM206 INCLUDES: 40V XGT Brushless 28mm Rotary Hammer Quick change chuck (HR001GZ) , DX12 Dust Collection System, 2 x 4.0Ah (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10) and Makpac Type 4 IMPACT ENERGY

2.8 J BLOWS PER MINUTE (BPM)

5,000 MAX. DRILLING CAPACITIES IN MASONRY 28MM MAX. DRILLING CAPACITIES IN STEEL 13MM MAX. DRILLING CAPACITIES IN WOOD 32MM NO LOAD SPEED

980 DIMENSIONS

373X102X238 MM WEIGHT

3.2 KGS

OPTIONAL: DX12 Dust Collection System Active Feedback sensing Technology

Anti Vibration Technology

turns the motor off if bit rotation is suddenly forced to stop.

(HR001G / HR002G)

Vibration Level

7.0 m/s

2

STOP

Redesigned Tool Balance for Increased Operability DESIGN

The tool's center of gravity is located as Anti-Vibration Technology (AVT®) is a close to the handle grip as possible, counterbalance inside the tool providing more controlsystem and less fatigue. that significantly reduces vibration.

120

up to

Auto-start TECHNOLOGY

DURABILITY

Wireless sensing System Technology) AFT (Active Feedback connects to compatible vacuum cleaner with Bluetooth. The turns the motor off if rotation speed vacuum cleaner automatically runs while the switch is on. kg suddenly slows or wheel is forced to stop (HR001G / HR002G)

eXtreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions

Lightweight

3.9

*AWS Chip (198901-5 ) required for Bluetooth

Center of gravity

Drilled holes with depth of 60mm with ø 12.5mm bit (BL4025)

HR002GM206 (4.0AH KIT)

CONVENIENCE

Auto-start Wireless System (AWS) connects to vacuum cleaner with Bluetooth*

Model: HR001G Battery: BL4025

Switch on the tool

Vacuum cleaner is activated

UP TO

HR002GZ (TOOL ONLY)

40V MAX XGT® BRUSHLESS 28MM ROTARY HAMMER, QUICK CHANGE CHUCK

120 HOLES

AT A DEPTH OF 60MM WITH 12.5MM BIT

 3 mode - Rotation, Hammering & Rotation with Hammering  6.0m/s² of vibration with DX14 and AVT (Anti-Vibration Technology)  High performance thanks to 2.9j* of impact energy  One touch sliding chuck enables quick and easy bit changes  XPT technology that protects against dust & moisture  Auto-start Wireless System (AWS) connects to vacuum cleaner with Bluetooth*

Bit Type SDS-PLUS

*AWS Chip (198901-5 ) required for Bluetooth

HR002GM206 INCLUDES: 40V XGT Brushless 28mm Rotary Hammer Quick change chuck (HR002GZ) , DX14 Dust Collection System, 2 x 4.0Ah (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10) and Makpac Type 4 IMPACT ENERGY

2.9 J BLOWS PER MINUTE (BPM)

5,000 MAX. DRILLING CAPACITIES IN MASONRY 28MM MAX. DRILLING CAPACITIES IN STEEL 13MM MAX. DRILLING CAPACITIES IN WOOD 32MM NO LOAD SPEED

980 DIMENSIONS

404 X 102 X 238 MM WEIGHT

3.4 KGS OPTIONAL: AWS Chip (198901-5)

10 |

LXT® SYSTEM. ENDLESS POSSIBILITIES

QUICK CHANGE CHUCK Easily converts SDS-Plus Rotary Hammer into a driver drill

OPTIONAL: DX14 Dust Collection System

Get Connected

NEW PRODUCT RELEASE

DF001GZ (TOOL ONLY) 40V MAX XGT BRUSHLESS DRIVER DRILL ®

 Compact overall 181mm length and lightweight at 2.0kg tool only  Variable 2 speed transmission with (0-650 & 0-2,600 RPM)  141Nm Max nut busting torque delivers unbeatable power  Electronic clutch (41/21 settings in Low/High mode)  XPT technology that protects against dust & moisture  Twin LED Job light with after-glow function CAPACITY (STEEL)

CAPACITY WOOD (AUGER-BIT) CAPACITY WOOD (SELF-FEED BIT) CHUCK CAPACITY MAX PEAK TORQUE NO LOAD SPEED

DIMENSIONS

WEIGHT

20 MM 50 MM 76MM 1.5 - 13 MM 141NM 980 HIGH: 2,600 | LOW: 650 2.0 KGS

DELIVERS 140 Nm

OF MAX TORQUE Active Feedback sensing Technology

Anti Vibration Technology

turns the motor off if bit rotation is suddenly forced to stop.

(HR001G / HR002G)

Vibration Level

7.0 m/s

2

STOP

Redesigned Tool Balance for Increased Operability PERFORMANCE

Makita built BL brushless motor provides excellent performance in heavy duty applications The tool's center of gravity is located as close to the handle grip as possible, providing more control and less fatigue.

120

up to

Drilled holes with depth of 60mm with ø 12.5mm bit (BL4025)

HP001GM203 (4.0AH KIT)

Auto-start TECHNOLOGY

Wireless sensing System Technology) AFT (Active Feedback connects vacuum with Bluetooth.

The turnsto compatible the motor offcleaner if rotation speed vacuum cleaner automatically runs while the switch is on. kg suddenly slows or wheel is forced to stop (HR001G / HR002G)

Lightweight

3.9

DURABILITY

All metal 13 mm self-ratcheting chuck for improved bit gripping strength and durability

CONVENIENCE

41 electronical clutch setting (21-stage setting in High mode) provides best torque option for the application

Center of gravity

Model: HR001G Battery: BL4025

Switch on the tool

Vacuum cleaner is activated

HP001GZ (TOOL ONLY)

40V MAX XGT BRUSHLESS HAMMER DRIVER DRILL 141NM ®

 Compact overall 182mm length and lightweight at 2.0kg tool only  Variable 2 speed transmission with (0-650 & 0-2,600 RPM)  141Nm Max nut busting torque delivers unbeatable power  Electronic clutch (41/21 settings in Low/High mode)  XPT technology that protects against dust & moisture  Twin LED Job light with after-glow function HR002GM206 INCLUDES: 40V XGT Brushless Hammer Driver Drill (HP001GZ), DX14 Dust Collection System, 2 x 4.0Ah (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10) and Makpac Type 4 IMPACTS PER MINUTE (IPM) MAX FASTENING TORQUE MAX TORQUE

HIGH: 0 - 39,000 | LOW: 0 - 9,750 HARD: 140 | SOFT: 68 N·M 141 N·M

CAPACITIES

STEEL: 20 MM | WOOD (AUGER-BIT): 50 MM

WOOD (SELF-FEED BIT): 76 MM

WOOD (HOLE SAW): 152 MM

NO LOAD SPEED

DIMENSIONS

WEIGHT

SIDING BOARD: 220 MM | MASONRY: 20 MM

980 404 X 102 X 238 MM 2.0 KGS

DELIVERS 20% FASTER DRILLING SPEED Then Competitors

www.makita.co.nz

LXT® SYSTEM. ENDLESS POSSIBILITIES

| 11

NEW PRODUCT RELEASE

HS003GM203 (4.0AH KIT)

HS003GZ (TOOL ONLY)

40V MAX XGT® BRUSHLESS 185MM CIRCULAR SAW, AWS CAPABLE  Max cut capacity of 68.5mm with up to 56 degree bevel capacity  Automatic Torque Drive increases torque to power through any cut  AC like power with 6,000rpm no load speed motor  Soft start for smooth operation & electric brake  Auto-start Wireless System (AWS) for on demand dust extraction* *AWS Chip (198901-5 ) required for Bluetooth

HS003GM203 INCLUDES: 40V max XGT Brushless 185mm Circular Saw, AWS capable (HS003GZ), 2 x 4.0Ah (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10) and Makpac Type 4 BLADE DIAMETRE 190 / 185 MM MAX CUTTING CAPACITY 90°: 68.5 / 66 MM

45°: 47.5 / 45.5 MM 56°: 35.5 / 34 MM NO LOAD SPEED (RPM)

6,000 DIMENSIONS

331X200X290 MM WEIGHT

3.4 KGS INCLUDED: EFFICUT 185mm Cutting blades B-62044 (Wood)

UP TO

310 CUTS

OPTIONAL: HS003GZ01 comes with AWS Chip (198901-5)

50MM X 250MM PINE 40% MORE CUTS PER CHARGE 40% FASTER CUT SPEED

TECHNOLOGY

Auto-start Wireless System (AWS) connects to vacuum cleaner with Bluetooth

CONVENIENCE

Blade blow function allows debris from cutting

CAPACITY

Large 68.5mm cutting capacity at 90°

DESIGN

0°- 56° bevel capacity with positive stops at 22.5° and 45°

*AWS Chip (198901-5 ) required for Bluetooth

12 |

LXT® SYSTEM. ENDLESS POSSIBILITIES

Get Connected

NEW PRODUCT RELEASE

corded

cordless

CF001GZ (TOOL ONLY) 40V MAX XGT® FAN  235 mm (9-1/4”) large fan produces strong enough air to create a comfortable work environment  AC/DC dual power source: AC adapter or Makita XGT Li-Ion battery  Automatically swings 45° L/R  Up to 11 hours of continuous runtime on low speed with a 40Vmax 4.0Ah XGT battery  3 settings (High 190 m/min, Medium 150 m/min, Low 120 m/min) MAX AIR FLOW M3/MIN MAX AIR SPEED M/MIN) CONTINUOUS RUN TIME (MIN) FAN DIAMETRE: MM AUTOMATIC OSCILLATION OFF-TIMER SWITCH DIMENSIONS

WEIGHT

CONVENIENCE

3-stage automatic timer with 1, 2, and 4 hour power-off selection

www.makita.co.nz

HIGH: 82 | MED: 65 | LOW: 52 HIGH: 190 | MED: 150 | LOW: 120 HIGH: 570 | MED: 930 | LOW: 1,540 235 MM (9-1/4”) LEFT/ RIGHT 45° 1 HOUR, 2 HOURS, 4 HOURS 140×333×447 MM 3.0 KGS

CONTROL

Three speed settings (High/Medium/Low) and Oscillation selector for optimal air velocity and control

VERSATILITY

Automatically oscillates 45º right and left

DESIGN

Designed for reduced wind noise level for quiet operation

LXT® SYSTEM. ENDLESS POSSIBILITIES

| 13

NEW PRODUCT RELEASE

JR001GM202 (4.0AH KIT)

JR001GZ (TOOL ONLY)

40V MAX XGT® BRUSHLESS RECIPRO SAW  32mm stroke with a cutting capacity of 255mm in wood  Newly designed vertical crank mechanism reduces vibration  High performance cutting speed of 3,000spm no load speed  Variable speed trigger for added convenience  XPT technology that protects against dust & moisture JR001GM202 INCLUDES: 40V max XGT Brushless Recipro Saw (JR001GZ), 2 x 4.0Ah (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10) and Plastic Case (821796-8) LENGTH OF STROKE STROKES PER MINUTE (SPM) CAPACITY

VIBRATION LEVEL SOUND PRESSURE LEVEL

DIMENSIONS

WEIGHT

32 MM HIGH: 3,000 | LOW: 2,300 PIPE: 130 MM | WOOD: 255 MM BOARDS: 18.0 M/S² | WOODEN BEAMS: 19.5 M/S² 85 DB(A) 331X200X290 MM 3.5 KGS

UP TO

155 CUTS IN 250 50 PINE X

PERFORMANCE

Delivers up to 130 cuts per charge in 25.4mm carbon steel pipe using XGT 4.0Ah battery

14 |

LXT® SYSTEM. ENDLESS POSSIBILITIES

SPEED

High cutting speed (Max 3,000 SPM) with 32 mm stroke length provide high cutting efficiency

PRODUCTIVITY

New redesign blade clamp makes for easier toolless blade change.

CONVENIENCE

Twin LED job light with preglow and afterglow functions illuminates cutting area

Get Connected

NEW PRODUCT RELEASE

DK0114G201 (4.0AH KIT) 40V MAX XGT® BRUSHLESS 2PCS KIT

2pc

 HP001GZ 40Vmax XGT Brushless Hammer Driver Drill  TD001GZ 40Vmax XGT Brushless Impact Driver  BL4040 2 x 4.0Ah 40Vmax XGT Batteries  DC40RA 40Vmax XGT Rapid Charger  ADP10 Adaptor LXT to XGT  Makita tool bag

DK0115G601 (4.0AH KIT)

6pc

40V MAX XGT® BRUSHLESS 6-PC KIT  HP001GZ 40Vmax XGT Brushless Hammer Driver Drill  TD001GZ 40Vmax XGT Brushless Impact Driver  JR001GZ 40Vmax XGT Brushless Recipro Saw  GA005GZ 40Vmax XGT Brushless Grinder 125mm Slide Switch  HR001GZ 40Vmax XGT Brushless AWS* AVT 28mm Rotary Hammer Normal chuck  HS003GZ 40Vmax XGT Brushless AWS* 185mm Circular Saw  BL4040 2 x 4.0Ah 40Vmax XGT Batteries  DC40RA 40Vmax XGT Rapid Charger  ADP10 Adaptor LXT to XGT  Makita tool bag

www.makita.co.nz

LXT® SYSTEM. ENDLESS POSSIBILITIES

| 15

NEW PRODUCT RELEASE

DTW700RTJ

(5.0AH KIT)

DTW700Z (TOOL ONLY)

18V LXT® BRUSHLESS 4-SPEED 1/2” SQ. DRIVE IMPACT WRENCH 700NM

C-RING

 BL™ Brushless Motor delivers 700 N·m. of Max Torque and 1,000 N·m of Nut-Busting Torque  4-speed power selection (0-500 / 0-1,200 / 0-1,900 / 0-2,200 RPM & 0-1,000 / 0-1,700 / 0-2,400 / 0-2,700 IPM)  3 forward and 3 reverse Auto-Stop modes for increased efficiency  Efficient BL™ Brushless Motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge  Weighs only 2.7 kg with battery for reduced operator fatigue DTW700RTJ INCLUDES: 18V LXT® Brushless 4-Speed 1/2” Sq. Drive Impact Wrench 700Nm(DTW700Z), 2 x 5.0Ah battery (BL1850), Rapid Charger (DC18RC) CAPACITY SQUARE DRIVE NUT-BUSTING TORQUE MAX TORQUE NO LOAD SPEED (RPM) IMPACTS PER MINUTE (IPM) DIMENSIONS

WEIGHT

STANDARD BOLT: M10 - M24 | HIGH STRENGTH BOLT: M10 - M16 12.7 MM (1/2”) 1,000 N·M 700 N·M MAX: 0 - 2,200 | HARD: 1,900 | MID: 1,200 | SOFT: 500 MAX: 0 - 2,700 | HARD: 2,400 | MID: 1,700 | SOFT: 1,000 170 X 81 X 276 MM 2.7 KG

5.0 Ah BATTERY

COMFORT

CONVENIENCE

Weighs only 2.7 kg with battery for reduced operator fatigue

LED job light with preglow and afterglow functions illuminates cutting area

1

POWER

BL™ Brushless Motor delivers 700 N·m. of Max Torque and 1,000 N·m of Nut-Busting Torque

SPEED

4-speed power selection (0-500 / 0-1,200 / 0-1,900 / 0-2,200 RPM & 0-1,000 / 0-1,700 / 0-2,400 / 0-2,700 IPM)

DTW701Z (TOOL ONLY) 18V LXT® BRUSHLESS 4-SPEED 1/2” SQ. DRIVE IMPACT WRENCH 700NM, DETENT PIN

DETENT PIN

 BL™ Brushless Motor delivers 700 N·m. of Max Torque and 1,000 N·m of Nut-Busting Torque  4-speed power selection (0-500 / 0-1,200 / 0-1,900 / 0-2,200 RPM & 0-1,000 / 0-1,700 / 0-2,400 / 0-2,700 IPM)  3 forward and 3 reverse Auto-Stop modes for increased efficiency  Efficient BL™ Brushless Motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge  Weighs only 2.7 kg with battery for reduced operator fatigue CAPACITY SQUARE DRIVE NUT-BUSTING TORQUE MAX TORQUE NO LOAD SPEED (RPM) IMPACTS PER MINUTE (IPM) DIMENSIONS

WEIGHT

16 |

STANDARD BOLT: M10 - M24 | HIGH STRENGTH BOLT: M10 - M16 12.7 MM (1/2”) 1,000 N·M 700 N·M MAX: 0 - 2,200 | HARD: 1,900 | MID: 1,200 | SOFT: 500 MAX: 0 - 2,700 | HARD: 2,400 | MID: 1,700 | SOFT: 1,000 170 X 81 X 276 MM 2.7 KG

LXT® SYSTEM. ENDLESS POSSIBILITIES

Get Connected

NEW PRODUCT RELEASE IMPACT WRENCH RANGE

DTW300

DTW1002

DTW700

18V LXT® BRUSHLESS 3-SPEED 1/2” SQ. DRIVE IMPACT WRENCH

18V LXT® BRUSHLESS 4-SPEED 1/2” SQ. DRIVE IMPACT WRENCH 700NM

18V LXT® BRUSHLESS HIGH TORQUE 13MM SQ. DRIVE IMPACT WRENCH

CAPACITY

M10 - M20 | M10 - M16

CAPACITY

M10 - M24 | M10 - M16

CAPACITY

M10 - M30 | M10 - M24

SQUARE DRIVE

12.7 MM (1/2”)

SQUARE DRIVE

12.7 MM (1/2”)

SQUARE DRIVE

12.7 MM (1/2”)

NUT-BUSTING TORQUE 580 N·M

NUT-BUSTING TORQUE 1000 N·M

NUT-BUSTING TORQUE 1,600 N·M

MAX TORQUE

MAX TORQUE

MAX TORQUE

330 N·M

700 N·M

1,000 N·M

NO LOAD SPEED (RPM) 0-3,200/ 2,600/ 1,800/ 1,000

NO LOAD SPEED (RPM) 0 - 2,200 / 1,900 / 1,200 / 500

NO LOAD SPEED (RPM) 0 - 1,800 / 1,000 / 900

DIMENSIONS

144 X 81 X 246 MM

DIMENSIONS

170 X 81 X 276 MM

DIMENSIONS

1.2 KG

WEIGHT

2.1 KG

WEIGHT

WEIGHT

IMPACT WRENCH RANGE ACCESSORIES  High performance accessories best suited for use with Makita Impact drivers

www.makita.co.nz

• • • • • • • •

229 X 91 X 289 MM 3.0 KG

CODE

DESCRIPTION

B-52308 B-66232 B-54645 B-55728 B-55712 B-55706 B-68448 134877-2

1/2” DEEP SOCKET 14pcs Set 1/2” SOCKETS 9ps Set 1/2” SOCKETS 9ps Set +1/4” Adapter 1/2” SOCKET EXTENSION 75mm 1/2” SOCKET EXTENSION 150mm 1/2” SOCKET EXTENSION 250mm 1/2”SQ to 1/4” HEX ADAPTER UNIVERSAL JOINT 1/2”

LXT® SYSTEM. ENDLESS POSSIBILITIES

| 17

NEW PRODUCT RELEASE

18 |

LXT® SYSTEM. ENDLESS POSSIBILITIES

Get Connected

NEW PRODUCT RELEASE

DJS800Z (TOOL ONLY) 18V LXT BRUSHLESS 13MM CEMENT SHEAR ®

 Cuts up to 13 mm (1/2”) cement fiber siding  360° swivel shear head for increased cutting convenience  Makita built BL brushless motor delivers 3,000 strokes per minute for faster cutting  Compact and ergonomic design at only 379mm long CAPACITY STROKES PER MINUTE (SPM) DIMENSIONS

WEIGHT

13 MM (1/2”) 0 - 3,000 379 X 79 X 216 MM 2.5 KGS

CONTROL HEAD ROTATES 360° FOR INCREASED CUTTING OPTIONS & CONVENIENCE

DJS200Z (TOOL ONLY) 18V LXT® BRUSHLESS 14 GAUGE 2MM STRAIGHT SHEAR  Cuts up to 2.0 mm (14 gauge) steel and 1.6 mm (16 gauge) stainless steel  360° swivel shear head for increased cutting convenience  Makita built BL brushless motor delivers 3,000 strokes per minute for faster cutting  Compact and ergonomic design at only 345mm long

CONTROL HEAD ROTATES 360° FOR INCREASED CUTTING OPTIONS & CONVENIENCE

CAPACITY STROKES PER MINUTE (SPM) DIMENSIONS

WEIGHT

STEEL: 2.0

MM (14 Ga) | STAINLESS STEEL: 1.6 MM (16 Ga)

0 - 3,000 345 X 79 X 207 MM 2.5 KGS

DJS131Z (TOOL ONLY) 18V LXT BRUSHLESS 18 GAUGE 1.3MM OFFSET SHEAR ®

 Offset shear head with 1.3 mm (18 Ga) max cutting capacity in steel  360° swivel shear head for increased cutting convenience  Makita built BL brushless motor delivers 3,000 strokes per minute for faster cutting  Compact and ergonomic design at only 332mm long CAPACITY STROKES PER MINUTE (SPM) DIMENSIONS

WEIGHT

SPEED

Makita built BL brushless motor delivers 3,000 strokes per minute for faster cutting

www.makita.co.nz

CONTROL HEAD ROTATES 360° FOR INCREASED CUTTING OPTIONS & CONVENIENCE

STEEL: 1.3

MM (18 Ga) | STAINLESS STEEL: 1.0 MM (20 Ga) 0 - 3,000 332 X 79 X 234 MM 2.3 KGS

VERSATILITY

Cuts up to 18 gauge mild steel and 20 gauge stainless steel

CONTROL

Swivel shear head rotates 360° for increased cutting options and added convenience

COMFORT

Weighs only 2.3 kg with battery for reduced operator fatigue

LXT® SYSTEM. ENDLESS POSSIBILITIES

| 19

NEW PRODUCT RELEASE

DGA519Z (TOOL ONLY) 18V LXT BRUSHLESS 115MM/125MM PADDLE SWITCH X-LOCK ANGLE GRINDER, WITH ELECTRIC BRAKE, VARIABLE SPEED ®

 X-LOCK mechanism enables to install/remove X-LOCK wheels with just a single action without tool  Variable speed control dial (3,000 - 8,500 RPM) enables user to match the speed to the application  Automatic torque Drive Technology (ADT) adjusts speed and torque during operation for optimal performance  Active Feedback sensing Technology (AFT) turns the motor off if rotation of the wheel is suddenly forced to stop  Electric brake maximizes productivity and increases safety for operator WHEEL DIAMETER NO LOAD SPEED (RPM)

DIMENSIONS

WEIGHT

125 MM (5”) 3,000 - 8,500 396 X 140 X 147 MM 3.1 KGS

OPTIONAL: 191G05-4 125mm Dust Extraction CuttingGuard

Delivers the same power as 1,000W corded grinder High durability • Large ball bearing supports the motor.

• New switch design to reduce contact wearness.

No load speed:

8,500min.ˉ¹

Active Feedback sensing Technology Shuts down the tool to protect the user, if the rotation speed suddenly slows down.

New toolless wheel cover allows for fast and easy angle adjustment and installation / removal of wheel cover.

Sudden reduction of rotational speed

Auto-Stop

CONTROL

TECHNOLOGY

Conveniently located variable speed AFT (Active Feedback sensing Technology) control dial enables user to match theCut concrete at depths of turns off amount if rotation speed 20mmthe motorWork on a full *1 to stop speed to the application suddenly slows or wheel forced about batteryischarge

40 % UP

20 |

PUSH

GA005G

140

18V Predecessor Model

100

Slow

LXT® SYSTEM. ENDLESS POSSIBILITIES

POWER

Accessories

Makita BL Brushless motor delivers 8,500 RPM no load speed

Dust collection wheel guard

CONVENIENCE

X-LOCK mechanism enables to install/ remove X-LOCK wheels with just a single action without tool

Battery: BL4040

about Fast

7m

Cutting depths: 20mm

Get Connected

NEW PRODUCT RELEASE

UP TO DPB183Z

(TOOL ONLY)

18V LXT® BRUSHLESS 66MM COMPACT BAND SAW  Compact cutting solution designed for one-handed operation in tight spaces and overhead applications  Makita’s built brushless BL motor delivers 3.2 m/s (630 ft./min.) blade speed for faster cutting  Large cutting capacity allows for single-pass cutting of 65 mm x 45 mm light gauge steel stud  Constant speed control minimizes the reduction in blade speed to provide stable cutting  Conveniently located variable speed control dial enables user to match the speed to the application CAPACITY BLADE SPEED

BLADE SIZE DIMENSIONS

WEIGHT

CONTROL

300 CUTS

1.4MM THICK GALVANIZED STEEL PIPE

ROUND: 66 MM | SQUARE: 66 X 66 MM 0 - 3.2 M/S LENGTH: 835 MM | WIDTH: 13 MM | THICKNESS: 0.5 MM 392 X 174 X 242 MM 3.9 KGS

Conveniently located variable speed control dial enables user to match the speed to the application

SPEED

Makita’s built brushless BL motor delivers 3.2 m/s (630 ft./min.) blade speed for faster cutting

DURABILITY

Aluminum blade housing for increased durability

CONVENIENCE

Exterior blade adjustment provides more accurate blade tracking for increased cutting performance

DPB184Z (TOOL ONLY) 18V LXT® BRUSHLESS 51MM COMPACT BAND SAW  Sub-Compact cutting solution designed for one-handed operation in tight spaces and overhead applications  Makita’s built brushless BL motor delivers 3.2 m/s (630 ft./min.) blade speed for faster cutting  Rigid aluminum die-cast frame and gear housing prevents the blade from sliding off the wheel  Constant speed control minimizes the reduction in blade speed to provide stable cutting  Conveniently located variable speed control dial enables user to match the speed to the application CAPACITY BLADE SPEED BLADE SIZE DIMENSIONS WEIGHT

www.makita.co.nz

ROUND: 51 MM | SQUARE: 51 X 51 MM 0 - 3.2 M/S LENGTH: 730 MM | WIDTH: 13 MM | THICKNESS: 0.5 MM 373 X 162 X 223 MM 3.6 KGS

LXT® SYSTEM. ENDLESS POSSIBILITIES

| 21

NEW PRODUCT RELEASE

DML812 (TOOL ONLY) 18V | 14.4V LXT LED FLASHLIGHT, 1,250 LUMENS ®

 4-mode operation: delivering 600 lumens on Spot, 1,000 lumens on Flood, 1,250 lumens on Spot/Flood, and Strobe mode  Illuminates up to 640m in Spot and Spot/Flood mode  Up to 7 hours of continuous illumination in Spot mode with 5.0Ah 18V LXT® battery (battery not included)  90º pivoting head for user convenience  Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions  Compact and ergonomic design with a height of only 313mm

LUMINOUS DIMENSIONS NET WEIGHT

SPOT: 600 | FLOOD: 1,000 | SPOT-FLOOD: 1,250LM

313 X 119 X 115 MM 1.6 KG

UP TO 7 HOURS IN 1,250 LUMENS SPOTLIGHT MODE USING A 18V LXT® LITHIUM-ION 5.0AH BATTERY

POWER

4-mode operation: 600 lm on Spot, 1,000 lm on Flood, 1,250 lm on Spot/ Flood, and 1,200 lm on Strobe

22 |

PERFORMANCE

Illuminates up to 640m in Spot and Spot/ Flood mode

LXT® SYSTEM. ENDLESS POSSIBILITIES

ERGONOMICS

Compact and ergonomic design with a height of only 313mm

VERSATILITY

90º pivoting head for user convenience

Get Connected

NEW PRODUCT RELEASE

DUC353PT2R (5.0AH KIT)

DUC353ZR (TOOL ONLY)

18V X2 (36V) LXT® BRUSHLESS 14” CHAIN SAW  Makita-built Outer Rotor BL™ Brushless Motor direct-drive system provides high power efficiency equivalent to a 32cc petrol chain saw  Variable speed trigger and high chain speed (0 - 1,200 m/min) for improved cutting performance  “Tool-less” chain adjustment for convenient operation and maintenance  Compact rear handle design offers improved performance and operator comfort  Low noise level and zero emissions for operator comfort

NOW AVAILABLE

HIGH-VIS ORANGE

DUC353PT2R INCLUDES: 18V X2 (36V) LXT® Brushless 14” Chain Saw (DUC353ZR) , 2 x 5.0Ah (BL1850), Dual Rapid Charger (DC18RD) GUIDE BAR LENGTH 350 MM (14”) CHAIN PITCH 3/8” CHAIN SPEED 0 - 1,200 M/MIN DIMENSIONS 443 X 215 X 235 MM WEIGHT 3.8 KGS

DUC356PT2R (5.0AH KIT)

5.0 Ah BATTERY

1

5.0 Ah BATTERY

1

DUC356ZR (TOOL ONLY)

18V X2 (36V) LXT® BRUSHLESS 14” TOP HANDLE CHAIN SAW

 Makita-built Outer Rotor BL™ Brushless Motor direct-drive system provides high power efficiency equivalent to a 30cc petrol chain saw  Variable speed trigger and high chain speed (0 - 1,200 m/min) for improved cutting performance  Torque boost mode powers through thick or hard branches  Captured bar nut and lateral chain tensioning for convenient operation and maintenance  Low noise level and zero emissions for operator comfort DUC353PT2R INCLUDES: 18V X2 (36V) LXT® Brushless 14” Top Handle Chain Saw (DUC356ZR) , 2 x 5.0Ah (BL1850), Dual Rapid Charger (DC18RD) GUIDE BAR LENGTH CHAIN PITCH CHAIN SPEED

350 MM (14”) 9.5 MM (3/8”) 0 - 1,200 M/MIN

DIMENSIONS WEIGHT

270 X 205 X 232 MM 3.8 KGS

www.makita.co.nz

LXT® SYSTEM. ENDLESS POSSIBILITIES

| 23

NEW PRODUCT RELEASE BL4025

BL4040

40V MAX XGT® 2.5Ah BATTERY

40V MAX XGT® 4.0Ah BATTERY

 Fully charged in 28min with DC40RA XGT® FAST CHARGER  Increased water and drop impact resistance  Digital communication between tool and battery  Cooling system for maximum battery life

 Fully charged in 45min with DC40RA XGT® FAST CHARGER  Increased water and drop impact resistance  Digital communication between tool and battery  Cooling system for maximum battery life

DC40RA

ADP10

40V MAX XGT FAST CHARGER  28 minutes to fully charge 40V max XGT® 2.5Ah battery  45 minutes to fully charge 40V max XGT® 4.0Ah battery  Equipped with an advanced cooling system for faster charging.  New charging status indicator light ®

DX12

 For use with the DC40RA XGT® FAST CHARGER  Allows a DC40RA to charge 14.4v or 18v LXT batteries quicker than any existing LXT battery charger

DX14

DUST EXTRACTOR ATTACHMENT WITH HEPA FILTER

DUST EXTRACTOR ATTACHMENT WITH HEPA FILTER

 Developed exclusively for XGT series  HEPA filter is used to capture very fine particles effectively with a dust box of capacity 400ml  260 mm max bit length

 Developed exclusively for XGT series  HEPA filter is used to capture very fine particles effectively with a dust box of capacity 400ml  260 mm max bit length

191G06-2

24 |

18V | 14.4V LXT® LED FLASHLIGHT, 1,250 LUMENS

191F81-2

DUST COLLECTION WHEEL GUARD FOR 125MM XGT GRINDER

DUST EXTRACTION SURFACE GRINDING SHROUD FOR 125MM XGT GRINDER

 Easily adjustable depth setting for quick changes  Dust port can be adjusted 360° for added versatility

 Soft brushes help prevent dust from escaping and help move the tool over the surface  Removable edge piece allows surface work flush to other objects

LXT® SYSTEM. ENDLESS POSSIBILITIES

Get Connected

NEW PRODUCT RELEASE FORSTNER DRILL BIT  Suitable for Drilling Blind Holes or Penetrating High-Quality, Medium-to-Large Holes  Suitable for precise working (e.g. making furniture)  Brad point (short)  For drilling clean, chip free holes in wood

• • • • • • • • • • •

SINGLE SPUR AUGER BIT WITH STRAIGHT SHANK  Suitable for Drilling Deep Holes with Medium to Large-Diameter Holes in Soft & Hard Wood  Threaded screw point pull the bit into workpiece providing fast, easy-to-use self feeding action  Highly effective for boring cleaner and more precise holes than flat bit or wood drill  Auger thread

• • • •

BAND SAW BLADE  Improved welding process for longer life  Durable Bi-Metal construction

www.makita.co.nz

DESCRIPTION

D-41816 D-41919 D-41931 D-41947 D-41953 D-41969 D-41975 D-41981 D-41997 D-42008 D-47357

FORSTNER BIT FORSTNER BIT FORSTNER BIT FORSTNER BIT FORSTNER BIT FORSTNER BIT FORSTNER BIT FORSTNER BIT FORSTNER BIT FORSTNER BIT FORSTNER 5PC

CODE

DESCRIPTION

D-53475 D-53481 D-53497 D-53506

CODE • E-04101 • E-04117 • E-04123

STARLOCK MULTI TOOL BLADE  3-Dimensional fit delivers high torque transfer and pro performance  No-Touch Quick Change for fast blade change with auto-ejection – change blades in 3 seconds!  Performance Class matches larger accessories to more powerful tools

CODE

• • • • • • • •

SHIP AUGER SHIP AUGER SHIP AUGER SHIP AUGER

SPECS 10 x 90 x 8mm shank 15 x 90 x 8mm shank 20 x 90 x 8mm shank 25 x 90 x 8mm shank 26 x 90 x 8mm shank 30 x 90 x 8mm shank 32 x 90 x 10mm shank 35 x 90 x 10mm shank 40 x 90 x 10mm shank 50 x 90 x 10mm shank 15/20/25/30/35mm

SPECS 13 x 250mm 1PC 15 x 250mm 1PC 13 x 450mm 1PC 15 x 450mm 1PC

DESCRIPTION

SPECS

*5PK*BANDSAW BLADE 14TPI FOR DPB184 *5PK*BANDSAW BLADE 1 8TPI FOR DPB184 *5PK*BANDSAW BLADE 24TPI FOR DPB184

CODE

DESCRIPTION

B-64864 B-64886 B-64892 B-64901 B-65056 B-65090 B-65109 B-67511

Bow Shape Plunge Cut Saw Blade Bow Shape Plunge Cut Saw Blade Bow Shape Plunge Cut Saw Blade Bow Shape Plunge Cut Saw Blade TC Segment Saw Blade TC Sanding Pointer Blade TC Sanding Pointer Blade Multi tool blade set

SPECS 65mm 20TPI 32mm 14TPI 65mm 14TPI 65mm 14TPI 85mm 32mm 40grit 32mm 100grit TMA045, TMA047, TMA053, TMA078

LXT® SYSTEM. ENDLESS POSSIBILITIES

| 25

NEW PRODUCT RELEASE DEBWST06 MITER SAW STAND  New miter saw mounting brackets allow easy and secure mounting of miter saw to stand  Maximum extended width of up to 2550mm wide  Compact and lightweight aluminum tubular design for job site portability  Replaces DEAWST06

NEW

EASY MOUNT MOUNTING BRACKETS

DEAWST07 MITER SAW STAND  New miter saw mounting brackets allow easy and secure mounting of miter saw to stand  Maximum extended width of up to 3,830mm wide  Compact and lightweight aluminum tubular design for job site portability

NEW

EASY MOUNT MOUNTING BRACKETS

JM00000219

191M39-3

EASY FIT BRACKET SET

WET FILTER FOR DVC750L

 New miter saw mounting brackets allow easy and secure mounting of miter saw to stand  Compatable with DEAWST06, DEBWST06, DEBWST07

 Allows DVC750 18V LXT® Brushless Dust Extractor to be used as a wet/dry vacuum

USE WITH

NEW

DVC750

EASY MOUNT MOUNTING BRACKETS

191B03-8

191J13-3

GUTTER NOZZLE FOR DUB362/DUB363

GUTTER NOZZLE ADAPTOR FOR DUB362/DUB363

 Makita’s 4m long gutter nozzle attachement suited for DUB362 blowers & DUB363 blowers vacuum allows you to blast leaves out of even hard-to-reach gutters

 Adapter pipe 71, for DUB362 and DUB363 Gutter Nozzle Adapter (191J13-3)

1

Attach the (1) gutter nozzle adapter to (2) gutter nozzle and then turn it to lock it into place.

2 26 |

LXT® SYSTEM. ENDLESS POSSIBILITIES

Gutter Nozzle Attachment (191B03-8) Get Connected

NEW PRODUCT RELEASE XLOCK GRIND DISC  The X-LOCK mount offers a wheel change that’s up to 5X FASTER than conventional interfaces  Removes the element of loose locking nut.  Accessories cannot be incorrectly mounted.

E-00418

CODE • E-00402 • E-00393

DESCRIPTION GRIND DISC XLOCK GRIND DISC XLOCK

SPECS 125 x 6 x 22.23 INOX 125 x 6 x 22.23 METAL

E-02076

CUT-OFF DISC XLOCK 125 X 1.2 X 22.23

DIAMOND WHEEL SEGMENTED / FOR CONCRETE, GRANITE 125MM

 The X-LOCK mount offers a wheel change that’s up to 5X FASTER than conventional interfaces  Removes the element of loose locking nut.  Accessories cannot be incorrectly mounted.

 The X-LOCK mount offers a wheel change that’s up to 5X FASTER than conventional interfaces  Removes the element of loose locking nut.  Accessories cannot be incorrectly mounted.

FLAP DISC  Zirconium abrasive grain provides consistent high cut rate; Last up to 30x longer than resin fiber discs  Flat design conforms to flat or irregular surfaces; excellent finish consistency at a 0º to 15º working angle

D-63797 FLAP DISC ZIRCONIA ALUMINUM

DIAMOND BLADE  Taller 13mm segments are designed for longer life and faster cutting  Up to 4x longer life than competitive blades  For cutting concrete, block, brick, pavers, and roof tiles  Optimum bond matrix provides a faster, longer lasting, and smoother cutting diamond blade  Carefully tensioned for less vibration and a superior user experience  Strict quality control measures ensure superior performance  Dry or wet cutting for added versatiity

CODE • D-63797 • D-28341

DESCRIPTION

SPECS

Flap Disc Zirconia Aluminum 125MM Z60grit Flap Disc Ceramic Aluminum Oxide 125MM 60grit

D-28341 FLAP DISC CERAMIC ALUMINUM OXIDE

CODE • E-02515

DESCRIPTION

SPECS

Diamond Blade, Segmented

230mm

BEST PERFORMANCE USE WITH DCE090 18V X2 LXT ® (36V) BRUSHLESS POWER CUTTER 230MM

www.makita.co.nz

LXT® SYSTEM. ENDLESS POSSIBILITIES

27

| 27

Copyright © 2020 Makita New Zealand Ltd. All Rights Reserved.

Get Connected