2011 Magnetics Ferrite Catalog

Ferrite Cores Short Form Catalog

Index Introduction .........................2 Materials .............................3 Toroids................................4 E, I Cores..........................14 EFD Cores ........................18 ETD Cores ........................20 EER Cores........................22 EC Cores..........................24 U, I, UR Cores ..................26 Planar E, I Cores ...............28 ER Cores.......................... 32 PQ Cores..........................34 Pot Cores .........................36 RS/DS Cores....................38 RM Cores .........................40 EP Cores ..........................42 Hardware.......................... 44

www.mag-inc.com

Applications & Materials Ferrites are dense, homogenous ceramic structures made by mixing iron oxide with oxides or carbonates of one or more metals such as zinc, manganese, nickel or magnesium. They are pressed, then fired in a kiln at 1093° C, and machined as needed to meet various operational requirements. Ferrite parts can be easily and economically molded into many different geometries. Many diverse materials are available, providing many choices of desirable electrical and mechanical properties.

Magnetics’ ferrite cores are manufactured for a wide variety of applications. Magnetics has the leading MnZn ferrite materials for power transformers, power inductors, wideband transformers, common mode chokes and many other applications.

ADVANTAGES OF MAGNETICS’ FERRITES •

The widest range of toroid sizes in power and high permeability materials

•

Superior toroid coatings available in several options

•

Standard gapping to precise inductance or mechanical dimension: wide range of coil former and assembly hardware available

•

The full range of standard planar E and I cores

•

Rapid prototyping capability for new development

FERRITE APPLICATION AREAS APPLICATIONS Broadband Transformers Common Mode Chokes

DESIRED PROPERTIES Low loss, high µ.

Good frequency response.

Very high µ (permeability).

Converter and Inverter Transformers

Low losses, high saturation.

Differential Inductors

Low losses, high temperature stability, good stability across load conditions.

Narrow Band Transformers

Moderate Q, high µ, high stability.

F, J

Pot cores, toroids, RM, EP

Noise Filters

High µ, good frequency response.

J, W

Toroids

Power Inductors

Low losses at high flux densities and temperatures. High saturation. Good stability across load conditions.

F, L, P, R

Pot cores, E cores, PQ cores, RM cores, Planar cores

Power Transformers

High µ and low losses at high flux densities and temperatures. High saturation. Low existing currents.

F, L, P, R

Ungapped pot cores, E, U & I cores toroids, EP cores, RS cores, DS cores, PQ cores, Planar cores

Pulse Transformers Telecom Inductors

High µ, low loss, high V set product.

Low losses, high temperature stability, good stability across load conditions.

2 MAGNETICS

PREFERRED MATERIALS J, W J, W F, L, P, R F, P, R

J, W F, P, R

AVAILABLE SHAPES Pot cores, toroids, E, U & I cores, RM, EP cores Toroids Toroids, E, U, & I cores, pot cores, RS cores, Planar cores Pot cores, EP cores, E-cores, RM cores, Planar cores, PQ cores

Toroids Pot cores, EP cores, E cores, RM cores, Planar cores

EMI/RFI FILTERS & BROADBAND TRANSFORMERS

INDUCTORS & POWER TRANSFORMERS MATERIAL Initial Permeability Maximum Usable Frequency (50% roll-off) Relative Loss Factor Curie Temperature Flux Density @ 1,194 A/m (15 Oe) Remanence Power Loss (PL) Sine Wave, in mW/cm3 (typical)

µi

—

L 900 ± 20%

f

MHz

<6

tan ␦ µiac Tc Bm Br 25kHz 200mT (2,000G) 100kHz 100mT (1,000G) 500kHz 50mT (500G)

Available In: Toroids E, I Cores EFD Cores ETD Cores EER Cores EC Cores U, I, UR Cores Planar E, I Cores ER Cores PQ Cores Pot Cores RS/DS Cores RM Cores EP Cores

R 2,300 ± 25%

P 2,500 ± 25%

F 3,000 ± 20%

<1.5

<1.2

<1.3

10-6 ˚C G mT G mT @25˚C @60˚C @100˚C @120˚C @25˚C @60˚C @100˚C @120˚C @25˚C @60˚C @100˚C @120˚C

J W 5,000 ± 20% 10,000 ± 30% <1

<8 (100kHz) <20 (100kHz) >300

100

X X X X X X X X X X X X X

>230 5,000 500 1,100 110 130 85 70 85 140 100 70 90 375 300 250 300

>230 5,000 500 1,100 110 120 90 95 130 125 90 125 165 300 250 275 350

>210 4,900 490 1,200 120 90 160 240

X X X X X X X X X X X X X X

X X X X X X X X X X X X X X

X X X X X X X X X X X X X X

<0.25 <7 (10kHz)

>140 4,300 430 1,000 100

>125 4,300 430 800 80

X X X

X X

X

X

X X X X

X X X X

100 180 225

www.mag-inc.com

3

Toroids 2.54mm â&#x20AC;&#x201C; 9.53mm

TOROIDS Ferrite toroids offer high magnetic efficiency as there is no air gap, and the cross sectional area is uniform. Available in many sizes (O.D.s from 2.54 mm to 140 mm) and materials (permeabilities ranging from 900 to 10,000), this section lists common sizes. For additional sizes contact Magnetics Sales.

Toroid mounts and headers are available in a range of sizes.

Typical applications for high permeability toroids (J and W materials) include common mode chokes, broadband transformers, pulse transformers and current transformers.

L, R, P and F material toroids are excellent choices for high frequency transformers.

Special sizes in J material are available for Ground Fault Interrupter applications.

SIZE 2.54 x 1.27 x 1.27 3.51 x 1.83 x 1.27 3.94 x 2.24 x 1.27 3.94 x 2.24 x 2.54 4.83 x 2.29 x 1.27 4.83 x 2.29 x 2.54 5.84 x 3.05 x 1.52 5.84 x 3.05 x 3.18 7.62 x 3.18 x 4.78 9.53 x 5.59 x 7.11 9.53 x 4.75 x 3.18 9.53 x 4.75 x 4.78

AVAILABLE COATINGS ORDERING CODE V Y Z 0_40200TC X 0_40301TC X 0_40502TC X 0_40503TC X 0_40401TC X 0_40402TC X 0_40601TC X 0_40603TC X 0_40705TC X 0_40907TC X X 0_41003TC X X 0_41005TC X X

NOMINAL AL (MH/1000T) L

178 372 751 683 399 599

R 400 380 340 670 440 870 450 940 1,920 1,730 1,000 1,510

P 454 410 368 716 474 948 488 1,020 2,088 1,884 1,095 1,650

F 525 495 440 885 570 1,140 585 1,225 2,505 2,260 1,314 1,980

J 875 825 735 1,475 950 1,900 980 2,040 4,175 3,765 2,196 3,308

W 1,750 1,650 1,470 2,950 1,900 3,800 1,960 4,080 8,350 7,530 4,392 6,616

MAGNETIC DATA ORDERING CODE SIZE 2.54 x 1.27 x 1.27 0_40200TC 3.51 x 1.83 x 1.27 0_40301TC 3.94 x 2.24 x 1.27 0_40502TC 3.94 x 2.24 x 2.54 0_40503TC 4.83 x 2.29 x 1.27 0_40401TC 4.83 x 2.29 x 2.54 0_40402TC 5.84 x 3.05 x 1.52 0_40601TC 5.84 x 3.05 x 3.18 0_40603TC 7.62 x 3.18 x 4.78 0_40705TC 9.53 x 5.59 x 7.11 0_40907TC 9.53 x 4.75 x 3.18 0_41003TC 9.53 x 4.75 x 4.78 0_41005TC

4 Toroids - MAGNETICS

le (mm)

Ae (mm2)

Ve (mm3)

Window Area (cm2)

WaAc (cm4)

(grams each)

5.5 7.65 9.2 9.2 10.2 10.2 13 13 15 22.7 20.7 20.7

0.77 1.03 1.05 2 1.5 3.1 2 4.3 9.9 13.7 7.3 10.9

4.3 7.87 9.7 19 15.7 31.5 26.7 56 149 310 151 227

0.01 0.02 0.03 0.03 0.04 0.04 0.07 0.07 0.07 0.24 0.17 0.17

0.000077 0.0002 0.0003 0.0006 0.0006 0.001 0.001 0.003 0.007 0.03 0.12 0.01

0.03 0.04 0.05 0.1 0.09 0.17 0.14 0.3 0.9 1.6 0.82 1.2

Weight

HOW TO ORDER

O J 4 14 06 TC XX Coating code Ferrite core material Used for all ferrite types Approximate diameter in mm Approximate height in mm Toroid core Special specification code

COATING CODES 0 – Bare core V – Nylon coating Y – Parylene C ® Z – Epoxy coating

SPECIAL SPECIFICATION CODES CC – Color coded

DIMENSIONS IN MM ORDERING CODE 0_40200TC 0_40301TC 0_40502TC 0_40503TC 0_40401TC 0_40402TC 0_40601TC 0_40603TC 0_40705TC 0_40907TC 0_41003TC 0_41005TC

A 2.54 3.46 3.94 3.94 4.83 4.83 5.84 5.84 7.62 9.53 9.53 9.53

B 1.27 1.78 2.24 2.24 2.29 2.29 3.05 3.05 3.18 5.59 4.75 4.75

C 1.27 1.27 1.27 2.54 1.27 2.54 1.52 3.18 4.78 7.11 3.18 4.78

www.mag-inc.com

5

Toroids 12.7mm – 15.9mm

SIZE 12.7 x 5.16 x 6.35 12.7 x 8.14 x 3.15 12.7 x 8.14 x 3.89 12.7 x 8.14 x 5.08 12.7 x 8.14 x 6.35 12.7 x 7.14 x 5.08 12.7 x 7.14 x 6.35 12.7 x 7.14 x 4.78 12.7 x 7.14 x 7.62 13.6 x 7.01 x 3.51 13.2 x 7.37 x 3.96 14 x 8.99 x 5 15.9 x 9.07 x 4.7 15.9 x 9.07 x 9.4

AVAILABLE COATINGS ORDERING CODE V Y Z 0_41206TC X X X 0_41303TC X X X 0_41304TC X X X 0_41305TC X X X 0_41306TC X X X 0_41405TC X X X 0_41406TC X X X 0_41407TC X X 0_41410TC X X 0_41435TC X X 0_41506TC X 0_41450TC X X 0_41605TC X X 0_41610TC X X

NOMINAL AL (MH/1000T) L 1,029 255 311 407 508 526 658 495 790

R 2,600 680 850 1,090 1,360 1,320 1,660 1,240 1,990

P 2,820 745 865 1,190 1,485 1,440 1,805 1,356 2,162

F 3,384 894 1,116 1,430 1,782 1,730 2,166 1,630 2,595

J 5,640 1,488 1,860 2,380 2,968 2,890 3,612 2,715 4,335

415 399 475 950

1,020 990 1,260 2,450

1,111 1,080 1,375 2,660

1,334 1,290 1,650 3,200

2,295 2,160 2,760

W 11,280 2,976 4,760 5,936 5,780 7,224 5,430 8,675 4,520 4,590 4,320 5,520 10,600

MAGNETIC DATA ORDERING CODE SIZE 12.7 x 5.16 x 6.35 0_41206TC 12.7 x 8.14 x 3.15 0_41303TC 12.7 x 8.14 x 3.89 0_41304TC 12.7 x 8.14 x 5.08 0_41305TC 12.7 x 8.14 x 6.35 0_41306TC 12.7 x 7.14 x 5.08 0_41405TC 12.7 x 7.14 x 6.35 0_41406TC 12.7 x 7.14 x 4.78 0_41407TC 12.7 x 7.14 x 7.62 0_41410TC 13.6 x 7.01 x 3.51 0_41435TC 13.2 x 7.37 x 3.96 0_41506TC 14 x 8.99 x 5 0_41450TC 15.9 x 9.07 x 4.7 0_41605TC 15.9 x 9.07 x 9.4 0_41610TC

6 Toroids - MAGNETICS

le (mm)

Ae (mm2)

Ve (mm3)

Window Area (cm2)

WaAc (cm4)

25 31.7 31.7 31.7 31.7 29.5 29.5 29.5 30.8 30.1 30.6 35 37.2 37.2

22 7.1 8.7 11.4 14 13.7 17.1 12.9 42.2 11.2 11.2 12.3 15.6 31.2

550 226 276 361 451.0 405 507 381 1302 336 343 430 580 1,164

0.2 0.49

0.04 0.03 0.045 0.05 0.07 0.054 0.06 0.05 0.07 0.04 0.04 0.07 0.09 0.18

0.49 0.49 0.4 0.4 0.4 0.38 0.42 0.63 0.62 0.62

Weight

(grams each)

3.3 1.2 1.9 2.4 2.7 1.9

1.9 2.2 2.8

HOW TO ORDER

O J 4 14 06 TC XX Coating code Ferrite core material Used for all ferrite types Approximate diameter in mm Approximate height in mm Toroid core Special specification code

COATING CODES 0 – Bare core V – Nylon coating Y – Parylene C ® Z – Epoxy coating

SPECIAL SPECIFICATION CODES CC – Color coded

DIMENSIONS IN MM ORDERING CODE 0_41206TC 0_41303TC 0_41304TC 0_41305TC 0_41306TC 0_41405TC 0_41406TC 0_41407TC 0_41410TC 0_41435TC 0_41506TC 0_41450TC 0_41605TC 0_41610TC

A 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 13.6 13.2 14 15.9 15.9

B 5.16 8.14 8.14 8.14 8.14 7.14 7.14 7.14 7.14 7.01 7.37 8.99 9.07 9.07

C 6.35 3.15 3.89 5.08 6.35 5.08 6.35 4.78 7.62 3.51 3.96 5 4.7 9.4

www.mag-inc.com

7

Toroids 18.4mm – 32mm

SIZE 18.4 x 9.75 x 10.3 20.6 x 12.7 x 6.35 20.6 x 12.7 x 8.89 22.1 x 13.7 x 6.35 22.1 x 13.7 x 7.9 22.1 x 13.7 x 12.7 25.3 x 15.4 x 7.66 25.3 x15.4 x 7.66 26.9 x 14.2 x 12.2 29 x 19 x 7.43 29 x 19 x 15.2 31 x 19.1 x 12.74 32 x 15 x 4.5

AVAILABLE COATINGS ORDERING CODE V Y Z 0_41809TC X X 0_42106TC X X 0_42109TC X X 0_42206TC X X 0_42207TC X X 0_42212TC X X 0_42507TC X X 0_42508TC X X 0_42712TC X X 0_42908TC X X 0_42915TC X 0_43113TC X 0_43205TC X

NOMINAL AL (MH/1000T) L 1,177 553 774 547 680 1,093 705 891

R 2,810 1,380 1,930 1,380 1,720 2,770 1,800 2,220 3,610 1,450 2,960 2,850 1,480

P 3,050 1,500 2,100 1,510 1,875 3,020 1,958 2,420 3,920 1,585 3,222 3,100 1,610

F 3,660 1,680 2,520 1,812 2,250 3,624 2,348 2,900 4,710 1,902 3,868 3,720 1,930

J 6,115 2,800 4,200 3,020 3,700 6,040 3,913 4,830 7,650 3,170 6,447 6,200 3,220

W 12,200 5,600 8,400 6,040 7,400 12,080 7,825 9,660 15,300 6,340 12,894 12,400 6,440

MAGNETIC DATA ORDERING CODE SIZE 18.4 x 9.75 x 10.3 0_41809TC 20.6 x 12.7 x 6.35 0_42106TC 20.6 x 12.7 x 8.89 0_42109TC 22.1 x 13.7 x 6.35 0_42206TC 22.1 x 13.7 x 7.9 0_42207TC 22.1 x 13.7 x 12.7 0_42212TC 25.3 x 15.4 x 7.66 0_42507TC 25.3 x15.4 x 7.66 0_42508TC 26.9 x 14.2 x 12.2 0_42712TC 29 x 19 x 7.43 0_42908TC 29 x 19 x 15.2 0_42915TC 31 x 19.1 x 12.74 0_43113TC 32 x 15 x 4.5 0_43205TC

8 Toroids - MAGNETICS

le (mm)

Ae (mm2)

Ve (mm3)

Window Area (cm2)

WaAc (cm4)

41.4 50.3 50 54.1 54.2 54.1 61.5 61.5 60.2 73.2 73.2 75.4 67.2

43.1 24.6 34 26.2 32.5 52.3 37.1 48 73.2 37 74.9 73.6 36.4

1,783 1,238 1,733 1,417 1,763 2,834 2,284 2,981 4,410 2,679 5,481 5,547 2,451

0.74 1.27 1.27 1.48 1.48 1.48 1.89 1.89 1.57 2.84 2.84 2.83 0.345

0.3 0.29 0.41 0.37 0.46 0.75 0.7 0.89 1.08 1.02 2.1 2.11 .61

Weight

(grams each)

9.9 5.4 8.1 6.4 8.5 13.5 11.6 14.9 12.9 27.6 29.3 12.9

HOW TO ORDER

O J 4 22 06 TC XX Coating code Ferrite core material Used for all ferrite types Approximate diameter in mm Approximate height in mm Toroid core Special specification code

COATING CODES 0 – Bare core V – Nylon coating Y – Parylene C ® Z – Epoxy coating

SPECIAL SPECIFICATION CODES CC – Color coded

DIMENSIONS IN MM ORDERING CODE 0_41809TC 0_42106TC 0_42109TC 0_42206TC 0_42207TC 0_42212TC 0_42507TC 0_42508TC 0_42712TC 0_42908TC 0_42915TC 0_43113TC 0_43205TC

A 18.4 20.6 20.6 22.1 22.1 22.1 25.34 25.34 26.9 29 29 30.83 32

B 9.75 12.7 12.7 13.7 13.7 13.7 15.45 15.45 14.2 19 19 19.06 15

C 10.3 6.35 8.89 6.35 7.9 12.7 7.66 10 12.2 7.43 15.2 12.74 4.5

www.mag-inc.com

9

Toroids 36mm – 61mm

SIZE 36 x 23 x 10 36 x 23 x 15 38 x 19 x 6.35 38.1 x 19 x 12.7 38.1 x 19 x 25.4 41.8 x 26.2 x 18 44.3 x19 x 15.9 46.9 x 27 x 15 49.1 x 33.8 x 15.9 49.1 x 31.8 x 15.9 49.1 x 31.8 x19.05 49.1 x 33.8 x 31.3 61 x 41.8 x 19.05

AVAILABLE COATINGS ORDERING CODE V Y Z 0_43610TC X 0_43615TC X 0_43806TC X 0_43813TC X 0_43825TC X 0_44015TC X 0_44416TC X 0_44715TC X 0_44916TC X 0_44920TC X 0_44925TC X 0_44932TC X 0_46019TC

NOMINAL AL (MH/1000T) L

R 2,030 3,100 2,020 3,850 8,060 3,867 5,360 3,700 2,710 2,790 3,420 5,430

P 2,210 3,366 2,200 4,185 8,762 4,204 5,830 4,030 2,950 3,032 3,718 5,900

F 2,726 4,040 2,640 5,020 10,040 5,040 7,000 4,840 3,540 3,640 4,460 7,080

J 4,543 6,736 4,400 8,365 16,730 8,408 11,600 8,075 5,900 6,065 7,435 11,800 7,100

W 9,085 13,400 8,800 16,700 33,400 16,816 23,200 16,100 11,800 12,130 14,870 23,600

MAGNETIC DATA ORDERING CODE SIZE 36 x 23 x 10 0_43610TC 36 x 23 x 15 0_43615TC 38 x 19 x 6.35 0_43806TC 38.1 x 19 x 12.7 0_43813TC 38.1 x 19 x 25.4 0_43825TC 41.8 x 26.2 x 18 0_44015TC 44.3 x19 x 15.9 0_44416TC 46.9 x 27 x 15 0_44715TC 49.1 x 33.8 x 15.9 0_44916TC 49.1 x 31.8 x 15.9 0_44920TC 49.1 x 31.8 x 19.05 0_44925TC 49.1 x 33.8 x 31.3 0_44932TC 61 x 41.8 x 19.05 0_46019TC

10 Toroids - MAGNETICS

le (mm)

Ae (mm2)

Ve (mm3)

Window Area (cm2)

WaAc (cm4)

(grams each)

89.6 89.6 82.9

63.9 95.9 58.3

5,731 8,596 4,644

4.15 2.85 2.85

2.61 3.93 1.62

29.4 44 26.4

82.9 82.8 103 84 110 127 123 123.2 127 157.6

115.6 231 138 189 145.5 118 119 161.8 236 180.5

9,452 19,304 14,205 16,770 16,063 15,010 14,700 19,927 30,000 28.453

2.85 2.85 5.4 2.85 5.72 8.99 7.94 7.94 8.99

3.27 6.58 7.45 5.33 8.12 10.4 9.45 11.6 21.2 24.0

51.7 103.4 68.9 80.8 84 75.3 74.6 91 150.6

Weight

HOW TO ORDER

O J 4 22 06 TC XX Coating code Ferrite core material Used for all ferrite types Approximate diameter in mm Approximate height in mm Toroid core Special specification code

COATING CODES 0 – Bare core V – Nylon coating Y – Parylene C ® Z – Epoxy coating

SPECIAL SPECIFICATION CODES CC – Color coded

DIMENSIONS IN MM ORDERING CODE 0_43610TC 0_43615TC 0_43806TC 0_43813TC 0_43825TC 0_44015TC 0_44416TC 0_44715TC 0_44916TC 0_44920TC 0_44925TC 0_44932TC 0_46019TC

A 36 36 38 38.1 38.1 41.8 44.3 46.9 49.1 49.1 49.1 49.1 60.9

B 23 23 19 19 19 26.2 19 27 33.8 31.8 31.8 33.8 41.8

C 10 15 6.35 12.7 25.4 18 15.9 15 15.9 15.9 19.05 31.3 19.1

www.mag-inc.com

11

Toroids 61mm – 140mm

SIZE 61 x 35.6 x 12.7 63 x 38 x 24.5 63 x 38 x 24.5 73.7 x 38.9 x 12.5 73.7 x 38.9 x 25.2 85.7 x 55.5 x 12.7 85.7 x 55.5 x 25.26 85.7 x 55.5 x 25.24 102 x 65.8 x 15 107 x 65 x 18 107 x 65 x 25 140 x 106 x 25

AVAILABLE COATINGS ORDERING CODE V Y Z 0_46113TC X 0_46325TC X 0_46326TC X 0_47313TC X 0_47325TC X 0_48613TC X 0_48625TC X 0_48626TC X 0_49715TC X 0_49718TC X 0_49725TC X 0_49740TC X

NOMINAL AL (MH/1000T) L

R 3,140

P 3,491

F 4,107

J 6,845

5,770 3,700 7,470 2,510 5,040

6,270 4,024 8,050 2,726 5,480

7,530 4,880 9,760 3,310 6,570

12,500 8,140 16,280 5,520 10,960

3,025 4,127 5,732 3,200

3,464 4,486 6,230 3,477

3,945 5,383 7,477 4,173

6,575 8,972 9,346 6,955

W 13,690 21,056 16,280 11,040 18,760 11,178 15,252 21,184 11,823

MAGNETIC DATA ORDERING CODE SIZE 61 x 35.6 x 12.7 0_46113TC 63 x 38 x 24.5 0_46325TC 63 x 38 x 24.5 0_46326TC 73.7 x 38.9 x 12.5 0_47313TC 73.7 x 38.9 x 25.2 0_47325TC 85.7 x 55.5 x 12.7 0_48613TC 85.7 x 55.5 x 25.6 0_48625TC 85.7 x 55.5 x 25.4 0_48626TC 102 x 65.8 x 15 0_49715TC 107 x 65 x 18 0_49718TC 107 x 65 x 25 0_49725TC 140 x 106 x 25 0_49740TC

12 Toroids - MAGNETICS

le (mm)

Ae (mm2)

Ve (mm3)

Window Area (cm2)

WaAc (cm4)

145 152 152 165 165 214.9 215 215 255.3 259.31 259.31 381.50

156 300 300 210 423 188.8 375 377 267.2 320.27 514.3 422.30

22,500 45,598 45,598 34,771 70,009 40,582 80,717 81,165 68,821 96,013 133,351 161,086

9.93 11.3 11.3 11.9

15.5 34.4 34.4 25.2 50.1 45.2 90.0 90.0 90.8 106 170.7 372.5

24.2

34 33.2 33.2 88.2

Weight

(grams each)

117.3 231 231 177 203

334 466 647 781

HOW TO ORDER

O J 4 97 40 TC XX Coating code Ferrite core material Used for all ferrite types Approximate diameter in mm Approximate height in mm Toroid core Special specification code

COATING CODES 0 – Bare core V – Nylon coating Y – Parylene C ® Z – Epoxy coating

SPECIAL SPECIFICATION CODES CC – Color coded

DIMENSIONS IN MM ORDERING CODE 0_46113TC 0_46325TC 0_46326TC 0_47313TC 0_47325TC 0_48613TC 0_48625TC 0_48626TC 0_49715TC 0_49718TC 0_49725TC 0_49740TC

A 61 63 63 73.7 73.7 85.7 85.7 85.7 102 107 107 140

B 35.6 38 38 38.9 38.9 55.5 55.5 55.5 65.8 65 65 106

C 12.7 24.5 24.5 12.5 25.2 12.7 25.26 25.24 15 18 25 25

www.mag-inc.com

13

E, I Cores 12mm â&#x20AC;&#x201C; 35mm

E CORES E cores are less expensive than pot cores, and have the advantage of simple bobbin winding plus easy assembly. E cores do not, however, offer self-shielding. Lamination size E cores are available to fit commercially offered bobbins previously designed to fit the strip stampings of standard lamination sizes. Metric and DIN sizes are also available. E cores can be pressed to different thicknesses, providing a selection of cross-sectional areas. Bobbins for these different cross sections are available.

E cores can be mounted in different directions and, if desired, provide a low profile. Printed circuit bobbins are available for low profile mounting.

Typical applications for E cores include differential, power and telecom inductors, as well as, broadband, power, converter and inverter transformers.

NOMINAL AL (MH/1000T) TYPE/SIZE E 9/4/2 Lam E2829 Lam E2829 Lam E3233 Lam EI187 Lam EI187 Lam E2425 EF25 Lam EL2425 Lam 2425I Lam E2425 E 25/12/11 Lam EL2425 DIN 30/7 Lam E2627 Lam EI375 E 35/20/9

ORDERING CODE 0_40904EC 0_41203EC 0_41205EC 0_41707EC 0_41808EC 0_41810EC 0_42510EC 0_42513EC 0_42515EC 0_42515IC 0_42520EC 0_42526EC 0_42530EC 0_43007EC 0_43009EC 0_43515EC 0_43520EC

L 280 350 700 520 550 1,000 800 900 540 1,600 1,070 920 1,400

R 493 587

P

1,600 1,100 1,253 2,500 1,920 2,491 1,253 1,913 3,840 3,784 2,507 2,240 3,147 2,907 2,120

1,013 1,153 2,300 1,767 1,900 1,153 1,760 3,533 2,800 2,307 2,060 2,893 2,667 1,947

F 650 770 1,950 1,300 1,500 3,000 2,300 2,460 1,500 2,290 4,600 4,068 3,000 2,700 3,780 3,500 2,555

J 1,040 1,367 1,900 2,500 5,000 3,700 4,000 2,400 3,667 7,400 5,951 4,800 3,800 5,893 5,813 4,240

W

4,293 8,600

13,813

8,200 10,653

MAGNETIC DATA TYPE/SIZE E 9/4/2 Lam E2829 Lam E2829 Lam E3233 Lam EI187 Lam EI187 Lam E2425 EF25 Lam EL2425 Lam 2425 Lam E2425 E 25/12/11 Lam EL2425 DIN 30/7 Lam E2627 Lam EI375 E 35/20/9

14 E Cores - MAGNETICS

ORDERING CODE 0_40904EC 0_41203EC 0_41205EC 0_41707EC 0_41808EC 0_41810EC 0_42510EC 0_42513EC 0_42515EC 0_42515IC 0_42520EC 0_42526EC 0_42530EC 0_43007EC 0_43009EC 0_43515EC 0_43520EC

le (mm)

Ae (mm )

A min (mm2)

Ve (mm3)

15.6 27.8 27.7 30.4 39.9 40.1 49 57.8 73.5 48.1 48 57.5 73.5 67 61.9 69.3 94.3

5.0 10.1 20.2 16.6 22.6 45.5 39.5 51.8 78.4 40.1 76.8 78.4 80.2 60 83.2 87 90.6

3.6 10.1 20 12.6 22.1 45.4 37 51.8 39.7 39.7 76.8 78.4 79.4 49 83.2 87 90.5

78 279 558 505 900 1,820 1,930 2,990 2,950 1,930 3,760 4,500 5,900 4,000 5,150 5,590 8,540

2

Weight

WaAc (cm4)

(grams per set)

0.001 0.03 0.03 0.07 0.15 0.16 0.24 0.42 0.32 0.21 0.51 0.84 0.5 0.74 0.85 1.68

0.5 1.3 2.6 3 4.4 8.5 9.5 16 15 10 19 36 30 20 26 33 42

HOW TO ORDER

O R 4 30 07 EC XX Standard core Ferrite core material Used for all ferrite types Approximate length in mm Approximate height in mm Geometry code/gap code Special specification code

SHAPE CODE 0 – Standard

GEOMETRY CODE

EC – ETD, EC, ER, EER, EFD, planar and lamination sizes

GAP CODE

Note – Any practical gap is available Cores are sold per piece (for sets multiply by 2). Gapped pieces are normally packed separately from ungapped pieces. If desired in sets, this must be specified.

DIMENSIONS IN MM TYPE/SIZE E 9/4/1 Lam E2829 Lam E2829 Lam E3233 Lam EI187 Lam EI187 Lam E2425 EF25 Lam EL2425 Lam 2425I Lam E2425 E 25/12/11 Lam EL2425 DIN 30/7 Lam E2627 Lam EI375 E 35/20/9

A 9 ± 0.4 12.7 ± 0.25 12.7 ± 0.25 16.8 ± .38 19.1 ± .4 19.13 ± .4 25.4 ± .6 25 + 0.8/-0.7 25.4 ± 0.38 26.4 ± 0.38 25.4 ± 0.6 25 + 0.8/-0.7 25.4 ± 0.38 30.8 + 0/-1.4 30.95 ± 0.5 34.2 ± 0.6 34.9 ± 0.38

B 4.06 ± 0.25 5.69 ± 0.18 5.69 ± 0.18 7.11 ± 0.18 8.1 ± 0.13 8.1 ± 0.18 9.65 ± 0.2 12.8 + 0/-0.4 15.9 ± 0.25 3.18 ± 0.12 9.65 ± 0.2 12.8 + 0/-0.5 15.9 ± 0.25 15.01 ± 0.2 13.1 ± 0.25 14.1 ± 0.15 20.62 ± 0.25

C 1.91 ± 0.13 3.18 ± 0.13 6.4 ± 0.15 3.56 ± 0.12 4.75 ± 0.2 9.53 ± 0.13 6.35 ± 0.25 7.5 + 0/-0.6 6.35 ± 0.25 7.37 ± 0.25 12.7 ± 0.25 11 + 0/-0.5 12.7 ± 0.25 7.3 ± 0/-0.5 9.4 ± 0.3 9.3 ± 0.25 9.53 ± 0.18

D 2.03 min 3.96 min 3.96 min 3.94 min 5.7 ± 0.13 5.7 min 6.4 min 8.7 + 0.6/-0 12.6 min

E 4.85 min 9.19 min 9.19 min 10.4 min 14.33 ± 0.33 14 min 18.8 min 17.5 + 0.9 18.8 min

F 1.91 ± .013 3.18 ± 0.08 3.2 ± 0.13 3.56 ± 0.13 4.75 ± 0.2 4.75 ± 0.2 6.25 ± 0.25 7.5 + 0/-0.5 6.35 ± 0.13

L 1.91 ± 0.25 1.57 nom 1.57 ref 2.79 nom 2.38 nom 2.38 ref 3.3 nom 3.55 ref 3.12 ± 0.13

M 1.57 ± 0.25 3.05 min 3.05 min 3.63 min 4.79 nom 4.89 ref 6.1 min 5.35 ref 6.4 ± 0.25

6.4 min 8.7 + 0.5/-0 12.6 min 9.71 + 0.5/-0 8.5 min 9.8 ± 0.13 15.6 min

18.8 min 17.5 + 1/-0 18.8 min 19.5 21.41 min 25.5 min 25.1 min

6.35 ± 0.25 7.5 + 0/-0.5 6.35 ± 0.13 7.2 + 0/-0.5 9.4 ± 0.13 9.3 ± 0.2 9.53 ± 0.25

3.6 max 3.53 ref 3.12 ± 0.13 5.65 nom 4.29 nom 4.7 max 4.75 ± 0.25

6.1 min 5.37 ref 6.4 ± 0.25 6.15 nom 6.0 min 8.0 min 7.95 nom

www.mag-inc.com

15

E, I Cores 40mm – 100mm

NOMINAL AL (MH/1000T) TYPE/SIZE Metric E40 E 42/21/9 DIN 42/15 DIN 42/15 I DIN 42/20 E 42/32/20 Lam EI121 Lam EI625 DIN 55/21 DIN 55/25 Lam EI75 Metric E60 E 65/32/27 E 71/33/32 F11 Metric E80 E100

ORDERING CODE 0_44011EC 0_44016EC 0_44020EC 0_44020IC 0_44022EC 0_44033EC 0_44317EC 0_44721EC 0_45528EC 0_45530EC 0_45724EC 0_46016EC 0_46527EC 0_47133EC 0_47228EC 0_48020EC 0_49928EC

L

R 4,000 2,667 4,600 6,253 5,533 4,000 3,900 5,360 6,293 7,520 8,093 5,733 8,600 10,800 5,960 4,673 6,227

P 4,347 2,907 5,000 6,806 6,013 4,709 4,240 5,827 6,840 8,173 8,800 6,240 10,984 11,600 6,480 5,080 6,773

F 5,200 3,495 6,000

J 7,293 5,647 9,700

W

7,600 5,562 5,900 8,300 8,220 9,800 10,400 6,590

10,613 8,727 9,800

18,293

14,580

24,000

13,400

MAGNETIC DATA TYPE/SIZE Metric E 40 E 42/21/9 DIN 42/15 DIN 42/15 I DIN 42/20 E 42/32/20 Lam EI121 Lam EI625 DIN 55/21 DIN 55/25 Lam EI75 Metric E60 E 65/32/27 E 71/33/32 F11 Metric E80 E100

16 E Cores - MAGNETICS

ORDERING CODE 0_44011EC 0_44016EC 0_44020EC 0_44020IC 0_44022EC 0_44033EC 0_44317EC 0_44721EC 0_45528EC 0_45530EC 0_45724EC 0_46016EC 0_46527EC 0_47133EC 0_47228EC 0_48020EC 0_49928EC

Weight

le (mm)

Ae (mm2)

A min (mm2)

Ve (mm3)

WaAc (cm4)

(grams per set)

76.7 98.4 97 67.1 97 145 77 88.9 124 123 107 110 147 149 137 184 274

127 107 178 177 233 236 149 234 353 420 337 248 540 683 368 392 738

114 106 175 176 233 234 142 226 345 411 337 240 530 676 363 392 692

9,780 10,500 17,300 11,900 22,700 34,200 11,500 20,800 44,000 52,000 36,000 27,200 79,000 102,000 50,300 72,300 202,000

1.39 2.08 3.55 2.26 4.59 4.48 1.48 2.77 9.91 11.8 69.34 7.16 25.9 38.1 14.8 30.8 156

49 52 87 60 114 164 57 103 212 255 179 135 410 260 264 357 970

HOW TO ORDER

O R 4 72 28 EC XX Standard core Ferrite core material Used for all ferrite types Approximate length in mm Approximate height in mm Geometry code/gap code Special specification code

SHAPE CODE 0 – Standard

GEOMETRY CODE

EC – ETD, EC, ER, EER, EFD, planar and lamination sizes

GAP CODE

Note – Any practical gap is available Cores are sold per piece (for sets multiply by 2). Gapped pieces are normally packed separately from ungapped pieces. If desired in sets, this must be specified.

DIMENSIONS IN MM TYPE/SIZE Metric E40 E 42/21/9 DIN 42/15 DIN 42/15 I DIN 42/20 E 42/32/20 Lam EI121 Lam EI625 DIN 55/21 DIN 55/25 Lam EI75 Metric E60 E 65/32/27 E 71/33/32 F11 Metric E80 E100

A 40.01 ± 0.51 42.15 ± 0.85 43 + 0/-1.7 43 + 0/-1.7 43 + 0/-1.7 42 + 1/-0.7 40.6 ± 0.65 46.9 ± 0.8 56.2 + 0/-2.1 56.2 + 0/-2.1 56.1 ± 1 59.99 ± 0.78 65 + 1.5/-1.2 70.5 ± 1 72.4 ± 0.76 80 ± 1.6 100.3 ± 2.0

B C 17 ± 0.31 10.69 ± 0.31 21.1 ± 0.2 9 ± 0.25 ± 21 0.2 15.2 + 0/-0.6 5.9 ± 0.2 15.2 + 0/-0.6 21 ± 0.2 20 + 0/-0.8 + 32.8 0/-0.4 20 + 1/-0.8 16.6 ± 0.2 12.4 ± 0.3 19.6 ± 0.2 15.6 ± 0.25 27.5 ± 0.3 21 + 0/-0.8 ± 27.6 0.38 24.61 ± 0.38 23.6 ± 0.25 18.8 ± 0.25 22.3 ± 0.3 15.62 ± 0.38 32.8 + 0/-0.6 27.4 + 0/-0.8 33.2 + 0/-0.5 32 + 0/-0.8 27.9 ± 0.33 19 ± 0.33 38.1 ± 0.3 19.8 ± 0.4 59.4 ± 0.47 27.5 ± 0.5

D E 10 min 27.6 min 14.9 min 29.5 min 14.8 + 0.6/-0 29.5 + 1.4/-0

F 10.7 ± 0.31 11.95 ± 0.25 12.2 + 0/-0.5

L 5.99 ± 0.25 5.94 ± 0.13 6.75 nom

M 8.86 nom 8.9 ± 0.25 8.65 nom

14.8 + 0.6/0 26 + 1/-0 10.4 min 12.1 min 18.5 + 0.8/-0 18.5 min 14.6 ± 0.13 13.8 min 22 + 0.8/-0 21.9 + 0.7/-0 17.8 min 28.2 ± 0.3 46.85 ± 0.38

12.2 + 0/-0.5 12.2 + 0/-0.5 12.45 ± 0.25 15.6 ± 0.25 17.2 + 0/-0.5 17.2 + 0/-0.5 18.8 ± 0.25 15.62 ± 0.38 20 + 0/-0.7 22 + 0/-0.7 19 ± 0.38 19.8 ± 0.4 27.5 ± 0.5

6.75 nom 5.98 ref 6.33 max 7.54 nom 9.35 ref 9.35 ref 9.5 nom 7.7 ± 0.25 10.4 nom 11.25 nom 9.53 ± 0.38 11.25 nom 13.75 ± 0.38

8.65 nom 9.13 ref 7.95 min 7.87 min 10.15 ref 10.15 ref 9.03 nom 14.49 ± 0.25 12.1 min 13.0 nom 16.9 min 19.45 min 22.65 ± 0.5

29.5 + 1.4/-0 29.5 + 1.4/-0 28.6 min 32.4 ± 0.65 37.5 + 1.5/-0 37.5 min 38.1 min 44 min 44.2 + 1.8/-0 48 + 1.5/-0 52.6 min 59.1 min 72 min

www.mag-inc.com

17

EFD Cores EFD CORES The industry standard economical flat design of EFD cores offers excellent space utilization for transformers or inductors. The optimized cross-sectional area is ideal for very flat compact transformer applications.

Hardware accessories are available.

NOMINAL AL (MH/1000T) TYPE/SIZE EFD 10 EFD 12 EFD 15 EFD 20 EFD 25 EFD 30

ORDERING CODE 0_41009EC 0_41212EC 0_41515EC 0_42019EC 0_42523EC 0_43030EC

L 280 380 400 650 1,000 1,000

R 585 760 893 1,300 2,093 2,200

P 622 800 973 1,633 2,280 2,695

F 698 844 1,170 1,881 2,730

J 923 2,600 1,933 2,696 4,507 4,668

EFD cores are ideal for compact transformers and inductor applications.

MAGNETIC DATA TYPE/SIZE EFD 10 EFD 12 EFD 15 EFD 20 EFD 25 EFD 30

ORDERING CODE 0_41009EC 0_41212EC 0_41515EC 0_42019EC 0_42523EC 0_43030EC

18 EFD Cores - MAGNETICS

Weight

le (mm)

Ae (mm2)

Amin (mm2)

Ve (mm3)

WaAc (cm4)

(grams per set)

23.7 28.5 34 47 57 68

7.2 11.4 15 31 58 69

6.5 10.7 12.2 29 55 66

171 325 510 1,460 3,300 4,700

0.004 0.01 0.02 0.093 0.23 0.36

0.9 1.8 2.8 7 16.2 24

HOW TO ORDER

O R 4 15 15 EC XX Standard core Ferrite core material Used for all ferrite types Approximate length in mm Approximate width (per set) in mm Geometry code/gap code Special specification code

GEOMETRY CODE

EC – All E cores including ETD, EC, ER, EER, EFD, planar and lamination sizes.

GAP CODE

Note – Any practical gap available

DIMENSIONS IN MM TYPE/SIZE EFD 10 EFD 12 EFD 15 EFD 20 EFD 25 EFD 30

A 10.5 ± 0.3 12.5 ± 0.3 15 ± 0.4 20 ± 0.55 25 ± 0.66 30 ± 0.8

B ± 5.2 0.1 6.2 ± 0.1 7.5 ± 0.15 10 ± 0.15 12.5 ± 0.15 15 ± 0.15

C 2.7 ± 0.1 3.5 ± 0.1 4.65 ± 0.15 6.65 ± 0.15 9.1 ± 0.2 9.1 ± 0.2

D ± 3.75 0.15 4.55 ± 0.15 5.5 ± 0.25 7.7 ± 0.25 9.1 min 11.2 ± 0.3

E ± 7.65 0.25 9 ± 0.25 11 ± 0.35 15.4 ± 0.5 18.1 min 22.4 ± 0.75

F ± 4.55 0.15 5.4 ± 0.15 5.3 ± 0.15 8.9 ± 0.2 11.4 ± 0.2 14.6 ± 0.25

K ± 4.45 0.05 2 ± 0.1 2.4 ± 0.1 3.6 ± 0.15 5.2 ± 0.15 4.9 ± 0.15

L 1.43 ref 1.75 ref 2 nom 2.3 ref 3.15 ± 0.2 3.8 ref

M 1.55 ref 1.8 ref 2.85 no 3.25 ref 3.65 ± 0.2 3.9 ref

www.mag-inc.com

19

ETD Cores ETD CORES ETD cores are an economical choice for transformers or inductors. ETDs offer a round centerpost for minimum winding resistance.

Also, dimensions are optimized for power transformer efficiency.

Hardware accessories are available.

Typical applications of Magnetics ETD cores include differential inductors and power transformers.

NOMINAL AL (MH/1000T) TYPE/SIZE ETD 29 ETD 34 ETD 39 ETD 44 ETD 49 ETD 54 ETD 59

ORDERING CODE 0_42929EC 0_43434EC 0_43939EC 0_44444EC 0_44949EC 0_45454EC 0_45959EC

L 1,100

R 2,250 2,707 2,973 3,667 4,093 5,200 5,747

P 2,843 2,933 3,227 4,000 4,440 6,281 6,240

F 3,600 4,050 4,950 5,400 7,400 7,500

MAGNETIC DATA TYPE/SIZE ETD 29 ETD 34 ETD 39 ETD 44 ETD 49 ETD 54 ETD 59

ORDERING CODE 0_42929EC 0_43434EC 0_43939EC 0_44444EC 0_44949EC 0_45454EC 0_45959EC

20 ETD Cores - MAGNETICS

Weight

le (mm)

Ae (mm2)

Amin (mm2)

Ve (mm3)

WaAc (cm4)

(grams per set)

72 78.6 92.2 103 114 127 139

76 97.1 125 173 211 280 368

71 91.6 123 172 209 280 360

5,470 7,640 11,500 17,800 24,000 35,500 51,500

0.73 1.21 2.21 3.75 5.83 9.45 13.7

28 40 60 94 124 180 248

HOW TO ORDER

O R 4 39 39 EC XX Standard core Ferrite core material Used for all ferrite types Approximate length in mm Approximate width (per set) in mm Geometry code/gap code Special specification code

GEOMETRY CODE

EC – All E cores including ETD, EC, ER, EER, EFD, planar and lamination sizes.

GAP CODE

Note – Any practical gap available

DIMENSIONS IN MM TYPE/SIZE ETD 29 ETD 34 ETD 39 ETD 44 ETD 49 ETD 54 ETD 59

A + 30.6 0/-1.6 35 + 0/-1.6 40 + 0/-1.8 45 + 0/-0.2 49.8 + 0/-2.2 54.5 ± 1.3 59.8 ± 1.3

B 15.8 ± 0.2 17.3 ± 0.2 19.8 ± 0.2 22.3 ± 0.2 24.7 ± 0.2 27.6 ± 0.2 31 ± 0.2

C + 9.8 0/-6 11.1 + 0/-0.6 12.8 + 0/-0.6 15.2 + 0/-0.6 16.7 + 0/-0.6 18.9 ± 0.4 21.65 ± 0.45

D ± 11 0.3 11.8 + 0/-0.6 14.2 + 0.8/-0 16.1 + 0.8/-0 17.7 + 0.8/-0 20.2 ± 0.4 22.1 min

E + 22 1.4/-0 25.6 + 1.4/-0 29.3 + 1.6/-0 32.5 + 1.6/-0 36.1 + 1.8/-0 41.2 ± 1.1 44.7 ± 1.09

F + 9.8 0/-0.6 11.1 + 0/-6 12.8 + 0/-0.6 15.2 + 0/-0.6 16.7 + 0/-0.6 18.9 ± 0.4 21.65 ± 0.45

www.mag-inc.com

21

EER Cores EER CORES EER cores are an economical choice for transformers and inductors. The round centerpost offers the advantage of a shorter winding path length than the winding around a square centerpost of equal area.

Hardware accessories are available.

Differential inductors and power transformers are typical applications of Magnetics EER cores.

NOMINAL AL (MH/1000T) TYPE/SIZE EER 28/14/11 EER 28/16/11 EER 35L EER 40/22/13 EER 42 EER 48/18/17 EER 48/21/21 EER 53/18/18

ORDERING CODE 0_42814EC 0_42817EC 0_43521EC 0_44013EC 0_44216EC 0_44818EC 0_44821EC 0_45418EC

L 1,340 1,150

R 2,700 2,500 2,693 3,300 3,840 6,400 5,700 6,100

P 3,352 2,913 2,960 3,520 4,173 6,850 7,059 6,500

F 3,896 3,400 3,550

7,950 8,274 7,440

MAGNETIC DATA TYPE/SIZE EER 28/14/11 EER 28/16/11 EER 35L EER 40/22/13 EER 42 EER 48/18/17 EER 48/21/21 EER 53/18/18

ORDERING CODE 0_42814EC 0_42817EC 0_43521EC 0_44013EC 0_44216EC 0_44818EC 0_44821EC 0_45418EC

22 EER Cores - MAGNETICS

Weight

le (mm)

Ae (mm )

Amin (mm2)

Ve (mm3)

WaAc (cm4)

(grams per set)

64 75.5 90.8 98 98.7 86 100 91.8

81.4 81.4 107 149 175 232 255 250

77 77 100 139 166 223 248 240

5,260 6,142 9,710 14,600 17,300 19,900 25,500 23,000

0.89 0.912 1.91 3.18 3.55 4.08 5.84 4.75

28 32 49 74 106 102 128 122

2

HOW TO ORDER

O R 4 42 16 EC XX Standard core Ferrite core material Used for all ferrite types Approximate length in mm Approximate height or width in mm Geometry code/gap code Special specification code

GEOMETRY CODE

EC – All E cores including ETD, EC, ER, EER, EFD, planar and lamination sizes.

GAP CODE

Note – Any practical gap available

DIMENSIONS IN MM TYPE/SIZE EER 28/14/11 EER 28/16/11 EER 35L EER 40/22/13 EER 42 EER 48/18/17 EER 48/21/21 EER 53/18/18

A 28.55 ± 0.55 28.55 ± 0.55 35 ± 0.65 40 ± 0.7 42.1 ± 0.81 48 ± 1 48 ± 1 53.5 ± 1

B 14 ± 0.2 16.7 ± 0.25 20.7 ± 0.2 22.4 ± 0.2 21.6 ± 0.2 18 ± 0.2 21.2 + 0/-0.4 18.3 ± 0.2

C 11.4 ± 0.35 11.4 ± 0.35 11.4 ± 0.35 13.4 ± 0.35 14.7 ± 0.3 17.6 ± 0.4 21 + 0.3/-0.5 17.95 ± 0.35

D 9.75 ± 0.4 12.65 ± 0.4 14.75 ± 0.35 15.45 ± 0.35 15.6 min 11.45 ± 0.25 14.7 + 0.7/-0 11.1 ± 0.3

E 21.75 ± 0.5 21.75 ± 0.5 26.15 ± 0.55 29.6 ± 0.6 31 ± 0.58 36.8 ± 0.8 38 + 0.5/-0.8 40.65 ± 0.85

F 9.9 ± 0.2 9.9 ± 0.25 11.3 ± 0.25 13.3 ± 0.25 14.7 ± 0.3 17.6 ± 0.4 18 ± 0.3 17.9 ± 0.4

www.mag-inc.com

23

EC Cores EC CORES A cross between a pot core and an E core, EC cores have a round center post that provides a wide opening on each side, and therefore, minimum winding resistance. The long legs support low leakage inductance designs.

NOMINAL AL (MH/1000T) TYPE/SIZE EC 35 EC 41 EC 52 EC 70

ORDERING CODE 0_43517EC 0_44119EC 0_45224EC 0_47035EC

R 2,213 3,473 3,867 4,413

P 2,400 3,200 4,200 4,800

F 3,000 3,700 5,040 5,760

EC cores have standard channels for clamping assemblies. Plain bobbins, printed circuit bobbins and clamps are available for most sizes.

Magnetics EC cores are typically used in differential inductor and power transformer applications.

MAGNETIC DATA TYPE/SIZE EC 35 EC 41 EC 52 EC 70

24 EC Cores - MAGNETICS

ORDERING CODE 0_43517EC 0_44119EC 0_45224EC 0_47035EC

Weight

le (mm)

Ae (mm )

Amin (mm2)

Ve (mm3)

WaAc (cm4)

(grams per set)

77.4 89.3 105 144

84.3 121 180 279

71 106 141 211

6,530 10,800 18,800 40,100

0.83 1.67 3.87 13.4

36 52 111 253

2

HOW TO ORDER

O R 4 70 35 EC XX Standard core Ferrite core material Used for all ferrite types Approximate length in mm Approximate width in mm Geometry code/gap code Special specification code

GEOMETRY CODE

EC – All E cores including ETD, EC, ER, EER, EEM, EFD, planar and lamination sizes.

GAP CODE

Note – Any practical gap available

DIMENSIONS IN MM TYPE/SIZE EC 35 EC 41 EC 52 EC 70

A 34.5 ± 0.8 40.6 ± 1.0 52.2 ± 1.3 70 ± 1.7

B 17.3 ± 0.15 19.5 ± 0.15 24.2 ± 0.15 34.5 ± 0.15

C 9.5 ± 0.3 11.6 ± 0.3 13.4 ± 0.35 16.4 ± 0.4

D 12.3 ± 0.4 13.9 ± 0.4 15.9 ± 0.4 22.75 ± 0.45

E 22.75 ± 0.55 27.7 ± 0.7 33 ± 0.9 44.5 ± 1.2

F 9.5 ± 0.3 11.6 ± 0.3 13.4 ± 0.35 16.4 ± 0.4

S 2.75 ± 0.25 3.25 ± 0.25 3.75 ± 0.25 4.75 ± 0.25

T 28.5 ± 0.8 33.6 ± 1 44 ± 1.3 59.6 ± 1.7

www.mag-inc.com

25

U, I, UR Cores U CORES U shape cores are ideal for higher power operation in tight spaces or unusual form factors. The long legs of a U core support low leakage inductance designs and facilitate superior voltage isolation.

U/I combinations facilitate economical assembly.

U cores are ideal for power transformer applications.

NOMINAL AL (MH/1000T) TYPE/SIZE U 11/6 I 11/6 U 22/20 U 25/12 U 26/3/7 I 25/6/6 U 25/16/12 UR 41/21/11 UR 41/21 UR 41/25 UR 41/30 UR 57 UR 59 UR 64 U 93/16 I 93/16 U 126/20 U 101/25 I 101/25

ORDERING CODE 0_41106UC 0_41106IC 0_42220UC 0_42512UC 0_42515UC 0_42516IC 0_42530UC 0_44119UC 0_44121UC 0_44125UC 0_44130UC 0_45716UC 0_45917UC 0_46420UC 0_49316UC 0_49316IC 0_49920UC 0_49925UC 0_49925IC

L

R 1,027 1,027

P 1,120 1,022 1,360

1,907 1,107 1,480 2,093 1,627 1,880 1,600 1,400 2,600 3,027 3,787 3,400 4,600 3,000 4,533 5,707

1,333 2,907 2,280 1,773 2,047 1,747 1,520 3,061 3,274 4,098 5,191 3,572 4,920 6,200

F 1,010 1,150

J

2,480 1,600 1,770 2,740 2,130

4,400 2,507

2,105 1,830 3,622 3,881 4,864 6,173 4,265 6,500 7,440

4,860

9,924 10,600 6,967

MAGNETIC DATA TYPE/SIZE U 11/6 I 11/6 U 22/20 U 25/12 U 26/3/7 I 25/6/6 U 25/16/12 UR 41/21/11 UR 41/21 UR 41/25 UR 41/30 UR 57 UR 59 UR 64 U 93/16 I 93/16 U 126/20 U 101/25 I 101/25

ORDERING CODE 0_41106UC 0_41106IC 0_42220UC 0_42512UC 0_42515UC 0_42516IC 0_42530UC 0_44119UC 0_44121UC 0_44125UC 0_44130UC 0_45716UC 0_45917UC 0_46420UC 0_49316UC 0_49316IC 0_49920UC 0_49925UC 0_49925IC

26 U, I, UR Cores - MAGNETICS

Weight

le (mm)

Ae (mm )

Amin (mm2)

Ve (mm3)

WaAc (cm4)

(grams per set)

29.2 24.6 95.8 68.9 83.4 64.3 83.4 121.2 115.2 134.4 154.8 163 189 210 258 258 480 308 245

12 11.5 39.7 80 40.4 40.3 80.8 91.1 114.3 113.1 112.1 171 210 290 447 447 560 645 645

11.5 11.5 39.7 80 40.4 40.3 80.8 80.5 105.4 105.4 105.4 171 210 290 447 447 560 645 645

350 283 4,130 4,170 3,370 2,590 6,740 11,000 13,172 15,196 17,346 27,900 39,700 61,000 115,000 115,000 268,800 199,000 158,000

0.02 0.01 0.91 0.67 0.63 0.32 1.27 2.86 3.09 4.44 5.88 9.6 15.5 22 86 76 221 975 324

1.8 1.5 19 29 17 13 34 54 55 64 75 140 198 320 800 200 1,360 168 102

2

HOW TO ORDER

O F 4 22 20 UC XX Standard core Ferrite core material Used for all ferrite types Approximate length in mm Approximate width in mm Geometry code Special specification code

SHAPE CODE 0 – Standard

GEOMETRY CODE U, UR – U core I – I cores

U CORE

I CORE

Cores are sold per piece (for sets multiply by 2). If desired in sets, this must be specified.

* UR cores have round legs. Visit www.mag-inc.com for drawings.

DIMENSIONS IN MM TYPE/SIZE U 11/6 I 11/6 U 22/20 U 25/12 U 26/3/7 I 25/6/6 U 25/16/12 UR 41/21/11 UR 41/21 UR 41/25 UR 41/30 *UR 57 *UR 59 *UR 64 U 93/16 I 93/16 U 126/20 U 101/25 I 101/25

A 10.85 ± 0.2 10.8 ± 0.2 22.1 ± 0.38 25.4 ± 0.5 25.4 ± 0.51 25.4 + 0.64/-0.51 25.4 ± 0.51 41.78 ± 0.81 41.78 ± 0.81 41.78 ± 0.81 41.78 ± 0.11 57.65 ± 1.7 59.34 ± 1.75 64 ± 1.95 93 ± 1.8 93 ± 1.8 126 ± 4 101.6 ± 1.5 101.6 ± 1.5

B 4.19 ± 0.13 1.83 ± 0.12 20.6 ± 0.38 12.9 ± 0.4 15.9 ref 6.35 ± 0.13 15.9 ref 20.6 ± 0.13 25.4 ± 0.13 25.4 ± 0.13 30.5 ± 0.3 28.6 + 0/-0.4 35.8 ± 0.4 40.5 ± 0.2 76 ± 0.5 27.5 ± 0.5 91 ± 1 57.1 ± .4 25.4 ± 0.4

C 6.3 ± 0.13 6.3 ± 0.13 6.27 ± 0.18 12.7 ± 0.4 6.35 ± 0.12 6.35 ± 0.13 12.7 ± 0.25 11.94 ± 0.25 11.94 ± 0.25 11.94 ± 0.25 11.94 ± 0.25 15.9 ± 0.4 17 ± 0.4 24 ± 0.3 16 ± 0.6 16 ± 0.6 20 ± 0.6 25.4 ± 0.6 25.4 ± 0.6

D 2.24 ± 0.13

E 7.19 ± 0.2

L 1.83 ± 0.13

13.98 min 6.35 min 9.27 min

9.5 ± 0.38 12.8 ref 12.7 ref

6.27 ± 0.18 6.3 ± 0.13 6.35 + 0/-0.1

9.27 min 11.1 ± 0.2 15.9 ± 0.2 15.9 ± 0.2 20.8 min 15.5 + 1/-0 21.5 ± 0.8 26.5 ± 0.4 48 ± 0.9

12.7 ref 18.8 ± 0.56 18.8 ± 0.56 18.8 ± 0.56 18.8 ± 0.56 27.8 ± 0.9 26.5 ± 0.1 24.1 ± 0.9 36.2 ± 1.2

6.35 ± 0.12

15.9 + 0.4 dia.

17 + 0.4 dia.

20 ± 0.4 dia.

28.4 ref

63 ± 2 31.7 ± 0.75

70 ± 2 50.8 ± 1

28 ref 25.4 ± 0.8

www.mag-inc.com

27

Planar E, I Cores 14mm â&#x20AC;&#x201C; 36mm

PLANAR E, I CORES Planar E cores are offered in all of the IEC standard sizes, as well as a number of other sizes. The leg length and window height (B and D dimensions) are adjustable for specific applications without new tooling. This permits the designer to adjust the final core specification to exactly accommodate the planar conductor stack height, with no wasted space. Clips and clip slots are available in many cases, which is especially useful for prototyping. I-cores are also offered standard, permitting further flexibility in design. E-I planar combinations are useful to allow practical face bonding in high volume assembly, and for making gapped inductor cores where fringing losses must be carefully considered due to the planar construction.

Differential inductors and DCDC, ACDC converter are typical applications for planar cores.

NOMINAL AL (MH/1000T) TYPE/SIZE E 14/2.5/15 E 14 C I 14 C E 18 C I 18 C E 18 I 18 E 22/4/7 I 22/4/7 E 22 C I 22 C E 22 I 22 E 32 C I 32 C E 32 I 32 E 36/6/18 I 36/3/18

ORDERING CODE 0_41425EC C_41434EC C_41434IC C_41805EC C_41805IC F_41805EC F_41805IC 0_42107EC 0_42107IC C_42216EC C_42216IC F_42216EC F_42216IC C_43208EC C_43208IC F_43208EC F_43208IC 0_43618EC 0_43618IC

L 780 600 780 1,500 1,800 1,550 1,800 1,480 2,300 2,900 2,400 2,900

3,200 3,700

R 1,653 1,327 1,504 3,244 3,606 3,244 3,641 3,448

P 1,595 1,399 1,580 3,430 3,801 3,430 3,837 3,173

F 1,765 1,563 1,749 3,853 4,241 3,853 4,278 3,810

5,066 5,956 5,066 6,207 6,521 7,321 6,700 7,321 6,678 7,303

5,387 6,506 5,387 6,568 6,918 7,745 6,918 7,745 7,090 7,736

6,131 7,327 6,131 7,834 8,711 8,744 8,711 8,039 8,729

MAGNETIC DATA TYPE/SIZE E 14/2.5/15 E 14 C I 14 C E 18 C I 18 C E 18 I 18 E 22/4/7 I 22/4/7 E 22 C I 22 C E 22 I 22 E 32 C I 32 C E 32 I 32 E 36/6/18 I 36/3/18

ORDERING CODE 0_41425EC C_41434EC C_41434IC C_41805EC C_41805IC F_41805EC F_41805IC 0_42107EC 0_42107IC C_42216EC C_42216IC F_42216EC F_42216IC C_43208EC C_43208IC F_43208EC F_43208IC 0_43618EC 0_43618IC

28 Planar E, I Cores - MAGNETICS

le (mm)

Ae (mm )

Amin (mm2)

Ve (mm3)

WaAc (cm4)

16.7 20.7 16.4 24.2 20.3 24.2 20.3 25.7 22.7 32.3 26.1 32.5 25.8 41.4 35.1 41.4 35.1 42.4 37.4

14.7 14.66 14.2 40.1 39.5 40.1 40.1 37.1 35.7 76 80.4 78.5 80.6 130 130 130 130 135 135

14.7 14.66 11.4 39.9 35.9 39.9 39.9 36 33.5 73.1 72.5 76 80.6 130 130 130 130 135 135

244 304 230 972 830 972 813 960 809 2,451 2,100 2,550 2,080 5,380 4,560 5,380 4,560 5,750 5,060

0.009 0.01 0.009 0.06 0.03 0.06 0.03 0.05 0.37 0.24 0.12 0.24 0.12 0.24 0.12 0.66 0.33 0.55 0.27

2

Weight

(grams per set)

1.2 1.5 1.2 4.9 4.1 4.7 3.9 4.2 11.9 10.4 12.4 10.1

26 22 28 25

HOW TO ORDER

C R 4 14 34 EC XX Shape code Ferrite core material Used for all ferrite types Approximate length in mm Approximate width in mm Geometry code/gap code Special specification code

SHAPE CODE

0 – Standard C – Planar E core with clip recesses F – Planar E core option: no clip recesses

GEOMETRY CODE

EC – All E cores including ETD, EC, ER, EER, EFD, planar and lamination sizes IC – I cores

GAP CODE E CORE

I CORE

Note – Any practical gap available Cores are sold per piece (for sets multiply by 2). Gapped pieces are normally packed separately from ungapped pieces. If desired in sets, this must be specified.

DIMENSIONS IN MM TYPE/SIZE E 14/2.5/15 E 14 C I 14 C E 18 C I 18 C E 18 I 18 E 22/4/7 I 22/4/7 E 22 C I 22 C E 22 I 22 E 32 C I 32 C E 32 I 32 E 36/6/18 I 36/3/18

A 14 ± 0.3 14 ± 0.3 14 ± 0.3 18 ± 0.35 18 ± 0.35 18 ± 0.35 18 ± 0.41 21.8 ± 0.4 21.8 ± 0.4 21.8 ± 0.4 21.8 ± 0.4 21.8 ± 0.4 21.8 ± 0.4 31.75 ± 0.64 31.75 ± 0.64 31.75 ± 0.64 31.75 ± 0.64 35.56 ± 0.5 36.58 ± 0.51

B 2.5 ± 0.1 3.5 ± 0.1 1.8 ± 0.05 4 ± 0.1 2.4 ± 0.5 4 ± 0.1 2.39 ± 0.1 3.91 ± 0.8 2.3 ± 0.2 5.7 ± 0.1 2.9 ± .05 5.72 ± 0.12 2.95 ± 0.1 6.35 ± 0.13 3.18 ± 0.13 6.35 ± 0.13 3.18 ± 0.13 6.35 ± 0.13 3.81 ± 0.25

C 5 ± 0.1 5 ± 0.15 5 ± 0.15 10 ± 0.2 10 ± 0.2 10 ± 0.2 10 ± 0.2 7.8 ± 0.5 7.8 ± 0.3 15.8 ± 0.3 15.8 ± 0.3 15.8 ± 0.3 15.8 ± 0.3 20.32 ± 0.41 20.32 ± 0.41 20.32 ± 0.41 20.32 ± 0.41 17.8 ± 0.4 18.29 ± 0.38

D 1 ± 0.1 1.91 min 1.5 ± 0.1 2 ± 0.1 2 ± 0.1 2 ± 0.1

E 11 ± 0.25 10.5 min 2.5 + 2/-0 14 ± 0.3 2.5 + 2/-0 13.7 min

F 3 ± 0.1 3 ± 0.1

L 1.5 ref 1.5 ref

M 4 ref 4 ref

4 ± 0.1

2 ref

5 ref

4 ± 0.1

2 ref

5 ref

1.73 ± 0.2

16.8 ± 0.3

5 ± 0.2

2.5 ± 0.12

5.89 ± 0.25

3.2 ± 0.1 2.5 ± 0.1 3.05 min

16.8 ± 0.4 2.9 + 0.2/-0 16.1 min

5 ± 0.1

2.5 ref

5.9 ref

5.08 ± 0.12

2.5 ref

5.9 ref

3.18 ± 0.2

24.9 min

6.35 ± 0.13

3.18

9.27

3.18 ± 0.2

24.9 min

6.35 ± 0.13

3.18

9.27

2.41 min

27.2 min

7.62 ± 0.18

3.81 ± 0.13

10.16 ± 0.25

www.mag-inc.com

29

Planar E, I Cores 38mm – 102mm

NOMINAL AL (MH/1000T) TYPE/SIZE E 38 I 38 E 40/8/10 I 40/4/10 E 43/8/28 I 43/4/28 E 43 I 43 E 58 C I 58 C E 58 I 58 E 64 C I 64 C E 64 I 64 E 102

ORDERING CODE F_43808EC F_43808IC 0_44008EC 0_44008IC 0_44308EC 0_44308IC F_44310EC F_44310IC C_45810EC C_45810IC F_45810EC F_45810IC C_46410EC C_46410IC F_46410EC F_46410IC 0_49938EC

L 3,880 4,600

R 7,867 9,028 4,233 4,744 8,560 10,133 8,266 10,631 8,498 9,821 8,498 9,970 14,618 16,139 16,154 18,098 9,810

P 8,354 9,566 4,504 5,035 9,150

F 9,490 9,028 5,134 5,706 11,172 11,849 10,450 11,489 10,427 11,941 10,427 11,941 17,901 19,639 17,901 19,699 11,697

ORDERING CODE F_43808EC F_43808IC 0_44008EC 0_44008IC 0_44308EC 0_44308IC F_44310EC F_44310IC C_45810EC C_45810IC F_45810EC F_45810IC C_46410EC C_46410IC F_46410EC F_46410IC 0_49938EC

le (mm)

Ae (mm )

Amin (mm2)

Ve (mm3)

WaAc (cm4)

(grams per set)

52.4 43.7 51.9 43.8 57.5 50.4 61.1 50.4 80.6 67.7 80.6 67.7 80.2 64.9 80.2 69.6 148

194 194 101 99.5 227 229 229 229 308 310 308 310 516 511 516 511 540

194 194 95.1 95.1 227 229 229 229 308 310 308 310 516 511 516 511 525

10,200 8,460 5,220 4,360 13,100 11,500 18,900 11,500 24,600 20,800 24,600 20,800 41,400 35,539 41,400 35,539 79,800

1.56 0.78 0.66 0.32 2.18 1.09 2.68 1.34 8.36 4.18 8.36 4.18 10.4 5.2 10.4 5.2 46

50.9 42.5 26 21 64 54 70.6 58 119 101 119 101 195 172 200 172 400

8,803 10,130 9,073 10,457 9,073 10,457 15,599 17,189 15,599 17,245 9,997

J

7,130 8,026

MAGNETIC DATA TYPE/SIZE E 38 I 38 E 40/8/10 I 40/4/10 E 43/8/28 I 43/4/28 E 43 I 43 E 58 C I 58 C E 58 I 58 E 64 C I 64 C E 64 I 64 E 102

30 Planar E, I Cores - MAGNETICS

2

Weight

HOW TO ORDER

C R 4 64 10 EC XX Shape code Ferrite core material Used for all ferrite types Approximate length in mm Approximate width in mm Geometry code/gap code Special specification code

SHAPE CODE

0 – Standard C – Planar E core with clip recesses F – Planar E core option: no clip recesses

GEOMETRY CODE

EC – All E cores including ETD, EC, ER, EER, EFD, planar and lamination sizes IC – I cores

GAP CODE E CORE

I CORE

Note – Any practical gap available Cores are sold per piece (for sets multiply by 2). Gapped pieces are normally packed separately from ungapped pieces. If desired in sets, this must be specified.

DIMENSIONS IN MM TYPE/SIZE E 38 I 38 E 40/8/10 I 40/4/10 E 43/8/28 I 43/4/28 E 43 I 43 E 58 C I 58 C E 58 I 58 E 64 C I 64 C E 64 I 64 E 102

A 38.1 ± 0.76 38.1 ± 0.76 40.65 ± 0.5 40.64 ± 0.51 43.2 ± 0.9 43.2 ± 0.9 43.2 ± 0.9 43.2 ± 0.9 58.42 ± 1.2 58.42 ± 1.2 58.42 ± 1.2 58.42 ± 1.2 64 ± 0.76 64.01 ± 1.21 64 ± 0.76 64.01 ± 1.27 102 ± 1

B 8.26 ± 0.13 3.81 ± 0.13 8.51 ± 0.25 4.45 ± 0.25 8.51 ± 0.25 4.1 ± 0.13 9.53 ± 0.13 4.1 ± 0.13 10.54 ± 0.2 4.1 ± 0.12 10.54 ± 0.2 4.1 ± 0.12 10.2 ± 0.1 5.08 ± 0.13 10.2 ± 0.1 5.08 ± 0.13 20.3 ± 0.25

C 25.4 ± 0.51 25.4 ± 0.51 10.7 ± 0.25 10.7 ± 0.25 27.9 ± 0.6 27.9 ± 0.6 27.9 ± 0.6 27.9 ± 0.6 38.1 ± 0.8 38.1 ± 0.8 38.1 ± 0.78 38.1 ± 0.8 50.8 ± 0.81 5.08 ± 1.02 50.8 ± 0.81 50.8 ± 1.02 37.5 ± 0.4

D 4.45 ± 0.13

E 30.23 min

F 7.62 ± 0.15

L 3.81

M 11.43

4.06 ± 0.25

30.45 ± 0.3

10.15 ± 0.15

5.1 ref

10.15 ref

4.19 min

34.7 min

8.1 ± 0.2

4.7 max

13.2 min

5.4 ±0.13

34.7 min

8.1 ± 0.2

4.7 max

13.2 min

6.35 min

50 min

8.1 ± 0.2

3.7 ref

21.4 ref

6.35 min

50 min

8.1 ± 0.2

3.7 ref

21.4 ref

5.03 min

53.16 min

10.16 ± 0.18

5.08 ± 0.12

21.8 ± 0.25

5.03 min

53.16 min

10.16 ± 0.18

5.08 ± 0.12

21.8 ± 0.25

13.3 ± 0.25

86 ± 1

14 ± 0.25

8 ref

36 ref

www.mag-inc.com

31

ER Cores ER CORES ER cores are a cross between E cores and pot cores. The round centerpost of the ER core offers minimal winding resistance. In addition, they offer better space utilization and shielding than with rectangular center leg planar cores. When compared with nonplanar cores, ERs offer minimal height and better thermal performance.

E/I combinations facilitate economical assembly. Surface mount accessories are available.

Typical applications of ER cores include differential inductors and power transformers.

NOMINAL AL (MH/1000T) TYPE/SIZE ER 9/5 ER 11/6 ER 12.5/8.5 I 12.5/8.5 ER 14.5/6 ER 18/3/10 ER 32/6/25 ER 20/7/14 C I 20/7/14 C ER 20/7/14 I 20/7/14 ER 23/3/12 ER 25/5.5/18 I 25/2/18 ER 25/8/18 ER 30/8/20 I 30/2.5/20

ORDERING CODE 0_40906EC 0_41126EC 0_41308EC 0_41308IC 0_41426EC 0_41826EC 0_43225EC C_42014EC C_42014IC F_42014EC F_42014IC 0_42313EC 0_42517EC 0_42517IC 0_42521EC 0_43021EC 0_43021IC

L 525 725 950 1,000 850 1,300 1,100 2,150 1,600 2,150 1,850 3,300 3,300 2,300 2,400 3,200

R 973 1,400 1,700 1,800 1,600 6,950 3,788 4,500 3,788 4,479 3,800 7,021 7,021 5,440 5,465 6,550

P 1,053 1,690 1,800 1,900 1,700 2,770 7,350

F 1,270 1,780 1,950 2,000 1,850 3,104 8,200

4,900 4,026 4,740 4,030 7,447 7,447 5,801 5,841 7,784

5,500 4,575 5,338 4,540 8,427 8,427 6,649 6,729 8,850

MAGNETIC DATA SIZE ER 9/5 ER 11/6 ER 12.5/8.5 I 12.5/8.5 ER 14.5/6 ER 18/3/10 ER 32/6/25 ER 20/7/14 C I 20/7/14 C ER 20/7/14 I 20/7/14 ER 23/3/12 ER 25/5.5/18 I 25/2/18 ER 25/8/18 ER 30/8/20 I 30/2.5/20

32 ER Cores - MAGNETICS

ORDERING CODE 0_40906EC 0_41126EC 0_41308EC 0_41308IC 0_41426EC 0_41826EC 0_43225EC C_42014EC C_42014IC F_42014EC F_42014IC 0_42313EC 0_42517EC 0_42517IC 0_42521EC 0_43021EC 0_43021IC

le (mm)

Ae (mm )

A min (mm2)

Ve (mm3)

14.2 14.7 17.5 15.9 19 22.1 38.2 33.2 25.1 33.2 25.5 26.6 26.4 26.4 41.4 46 36.2

8.47 11.9 19.9 19.8 17.6 30.2 141 59 59.8 59 57.3 50.2 89.7 89.7 100 108 108

7.6 10.3 19.2 19.2 17.3 30.1 38.2 55 55 55 52.5 50 82.8 82.8 95 95 95

120 174 348 315 333 667 5,400 1,960 1,500 1,960 1,460 1,340 2,370 2,370 4,145 4,970 3,910

2

Weight

(grams per set)

1 1 2 1 2 3

6.4 16.4 13.1 22.0 26.4 20.8

HOW TO ORDER

O R 4 09 06 EC XX Shape code Ferrite core material Used for all ferrite types Approximate length in mm Approximate depth in mm Geometry code/gap code Special specification code

SHAPE CODE

0 – Standard C – Planar E core with clip recesses F – Planar E core option: no clip recesses

GEOMETRY CODE

EC – All E cores including ETD, EC, ER, EER, EFD, planar and lamination sizes.

IC – I cores

ER CORE

I CORE

DIMENSIONS IN MM TYPE/SIZE ER 9/5 ER 11/6 ER 12.5/8.5 I 12.5/8.5 ER 14.5/6 ER 18/3/10 ER 32/6/25 ER 20/7/14 C I 20/7/14 C ER 20/7/14 I 20/7/14 ER 23/3/12 ER 25/5.5/18 I 25/2/18 ER 25/8/18 ER 30/8/20 I 30/2.5/20

A 9.5 + 0/-0.3 11 + 0/-0.35 12.8 ± 0.3 12.8 ± 0.3 14.7 + 0/-0.4 18 ± 0.35 32.1 + 0.55/-0.45 20 ± 0.35 20 ± 0.35 20 ± 0.35 20 ± 0.35 23.2 ± 0.45 25 ± 0.4 25 ± 0.4 25 ± 0.4 30 ± 0.4 30 ± 0.4

B 2.45 ± .05 2.45 ± 0.05 2.85 ± 0.8 1.1 ± 0.1 2.95 ± 0.5 3.15 ± 0.1 6 ± 0.13 6.8 ± 0.1 2.3 ± 0.05 6.8 ± 0.1 1.9 ± 0.05 3.6 ± 0.1 5.6 ± 0.1 2.3 ± 0.05 8 ± 0.1 8 ± 0.15 2.7 ± 0.1

C 5 + 0/-0.2 6 + 0/-0.2 8.7 ± 0.25 8.7 ± 0.25 6.8 + 0/-0.2 9.7 ± 0.2 25.4 ± .4 14 ± 0.3 14 ± 0.3 14 ± 0.3 14 ± 0.3 12.5 ± 0.25 18 ± 0.3 18 ± 0.3 18 ± 0.3 20 ± 0.3 20 ± 0.3

D 1.6 + 0.15/-0 1.5 + 0.15/-0 1.75 ± 0.13

E 7.5 + 0.25/-0 8.7 + 0.3/-0 11.2 ± 0.3

F 3.5 + 0/-0.2 4.25 + 0/-0.25 5 ± 0.15

G 7.1 + 0.2/-0 8 + 0/-0.25 9.05 ± 0.3

1.55 + 0.2/-0 1.6 ± 0.1 2.9 + 0/-0.25 4.6 ± 0.15 1.9 ± 0.1 4.6 ± 0.15

11.6 + 0.4/-0 15.6 ± 0.3 27.2 ± 0.4 18 ± 0.35 3 ± 0.1 18 ± 0.35

4.8 + 0/-0.2 6.2 ± 0.15 12.4 ± 0.15 8.8 ± 0.15

13.5 min 27.2 ± 0.4 12.86 ± 0.35

8.8 ± 0.15

12.86 ± 0.35

1.6 ± 0.1 2.75 ± 0.15

20.2 ± 0.4 22 ± 0.4

8 11 ± 0.2

17.5 min 15.2 ± 0.7

5.15 ± 0.15 5.3 ± 0.2

22 ± 0.4 26 ± 0.4

11 ± 0.2 11 ± 0.2

15.2 ± 0.7 19.45 ± 0.4

www.mag-inc.com

33

PQ Cores PQ CORES PQ cores are designed specifically for switched mode power supplies. This design provides an optimized ratio of volume to winding area and surface area. As a result, both maximum inductance and winding area are possible with a minimum core size. The cores provide maximum power output with minimum assembled transformer weight and volume, in addition to taking up a minimum amount of area on the printed circuit board.

Assembly with printed circuit bobbins and one piece clamps is simplified. This efficient design provides a more uniform crosssectional area; thus cores tend to operate with fewer hot spots than with other designs.

NOMINAL AL (MH/1000T) TYPE/SIZE PQ 20/16 PQ 20/20 PQ 26/10 PQ 26/14 PQ 26/20 PQ 26/25 PQ 32/12 PQ 32/20 PQ 32/30 PQ 35/35 PQ 40/40 PQ 50/50

ORDERING CODE 0_42016UG 0_42020UG 0_42610UG 0_42614UG 0_42620UG 0_42625UG 0_43214UG 0_43220UG 0_43230UG 0_43535UG 0_44040UG 0_45050UG

L 1,650 1,300 3,900 2,700 2,640 2,200

R 3,587 2,947 7,733 5,613 5,560 4,600 6,867 6,640 4,667 4,813 4,267 7,400

P 3,907 3,213 8,413

F 4,690 3,860 8,080 7,335 7,270 6,010 8,960 8,875 6,100 7,347 5,580 9,639

6,053 5,000 7,467 7,213 5,080 5,240 4,640 8,195

Typical applications include power transformers and power inductors.

MAGNETIC DATA TYPE/SIZE PQ 20/16 PQ 20/20 PQ 26/10 PQ 26/14 PQ 26/20 PQ 26/25 PQ 32/12 PQ 32/20 PQ 32/30 PQ 35/35 PQ 40/40 PQ 50/50

34 PQ Cores - MAGNETICS

ORDERING CODE 0_42016UG 0_42020UG 0_42610UG 0_42614UG 0_42620UG 0_42625UG 0_43214UG 0_43220UG 0_43230UG 0_43535UG 0_44040UG 0_45050UG

Weight

le (mm)

Ae (mm )

Amin (mm2)

Ve (mm3)

WaAc (cm4)

(grams per set)

37.6 45.7 29.4 33.3 45 54.3 34.4 55.9 74.7 86.1 102 113

61.9 62.6 105 86.4 121 120 109 169 167 190 201 328

59.1 59.1 93.8 70.9 109 108 92 142 142 162 175 314

2,330 2,850 3,090 2,880 5,470 6,530 3,750 9,440 12,500 16,300 20,500 37,100

0.15 0.23 0.09 0.17 0.39 0.59 0.3 0.8 1.6 3.1 5 8.52

13 15 15 14 31 36 21 42 55 73 95 195

2

HOW TO ORDER

O P 4 20 16 UG XX Standard core Ferrite core material Used for all ferrite types Approximate length in mm Approximate width (per set) in mm Geometry code/gap code Special specification code

GAP CODE

UG – Ungapped Note – Any practical gap available

DIMENSIONS IN MM TYPE/SIZE PQ 20/16 PQ 20/20 PQ 26/10 PQ 26/14 PQ 26/20 PQ 26/25 PQ 32/12 PQ 32/20 PQ 32/30 PQ 35/35 PQ 40/40 PQ 50/50

A B 21.3 ± 0.4 8.1 ± 0.1 21.3 ± 0.4 10.1 ± 0.1 ± 27.2 0.45 5.1 ± 0.1 27.2 ± 0.45 5.94 ± 0.1 27.3 ± 0.46 10.1 ± 0.13 27.3 ± 0.46 12.35 ± 0.13 33 ± 0.5 5.94 ± 0.1 33 ± 0.5 10.3 ± 0.13 33 ± 0.5 15.15 ± 0.13 36.1 ± 0.6 17.35 ± 0.13 41.5 ± 0.9 19.9 ± 0.15 51 ± 0.7 25 ± 0.25

2B 16.2 ± 0.2 20.2 ± 0.2 10.2 ± 0.2 11.9 ± 0.2 20.2 ± 0.25 24.7 ± 0.25 11.9 ± 0.2 20.6 ± 0.25 30.3 ± 0.25 34.7 ± 0.25 39.8 ± 0.3 50 ± 0.5

C 14 ± 0.4 14 ± 0.4 19 ± 0.45 19 ± 0.45 19 ± 0.45 19 ± 0.45 22 ± 0.5 22 ± 0.5 22 ± 0.5 26 ± 0.5 28 ± 0.6 32 ± 0.6

D 5.15 ± 0.15 7.15 ± 0.15 1.2 min 3.4 min 5.75 ± 0.15 8.05 ± 0.15 3.4 min 5.75 ± 0.15 10.65 ± 0.15 12.5 ± 0.15 14.75 ± 0.2 18.05 ± 0.3

2D 10.3 ± 0.3 14.3 ± 0.3 2.39 min 6.7 min 11.5 ± 0.3 16.1 ± 0.3 6.7 min 11.5 ± 0.3 21.3 ± 0.3 25 ± 0.3 29.5 ± 0.4 36.1 ± 0.6

E 18 ± 0.4 18 ± 0.4 22.05 min 22.05 min 22.5 ± 0.45 22.5 ± 0.46 27 min 27.5 ± 0.5 27.5 ± 0.5 32 ± 0.5 37 ± 0.6 44 ± 0.7

F 8.8 ± 0.2 8.8 ± 0.2 12.2 max 12.2 max 12 ± 0.2 12 ± 0.2 13.75 max 13.5 ± 0.25 13.5 ± 0.25 14.4 ± 0.25 14.9 ± 0.3 20 ± 0.35

www.mag-inc.com

G 12 min 12 min 15.5 min 15.5 min 15.5 min 15.5 min 19 min 19 min 19 min 23.5 min 29 ± 1 32 min

35

Pot Cores POT CORES The pot core shape is a convenient means of adjusting the ferrite structure to meet the specific requirements of an application. Both high circuit Q and good temperature stability of inductance can be obtained with these cores. Pot cores, when assembled, nearly surround the wound bobbin. This selfshielded geometry isolates the winding from stray magnetic fields or effects from other surrounding circuit elements.

Both plain and printed circuit bobbins are available, as are mounting and assembly hardware.

Typical applications for pot cores include; differential inductors, power transformers, power inductors, converter and inverter transformers, filters, both broadband and narrow transformers and telecom inductors.

NOMINAL AL (MH/1000T) TYPE/SIZE PC 7/4 PC 9/5 PC 11/7 PC 11/9 PC 14/8 PC 18/11 PC 18/14 PC 22/13 PC 26/16 PC 28/23 PC 30/19 PC 36/22 PC 42/29

ORDERING CODE 0_40704UG 0_40905UG 0_41107UG 0_41109UG 0_41408UG 0_41811UG 0_41814UG 0_42213UG 0_42616UG 0_42823UG 0_43019UG 0_43622UG 0_44229UG

L

R 886 1,013 1,533 1,467 2,053 3,067 3,076 4,040 5,213

P 964 1,100 1,667 1,573 2,240 3,333 3,268 4,400 5,667

6,680 8,700 9,200

7,267 9,467 10,000

F 1,200 1,365 2,000 1,900 2,800 4,000 3,350 4,900 6,350 7,000 8,100 10,200 12,000

J 2,257 2,727 3,900

W 4,286 6,029 9,000

5,073 7,500 5,088 9,100 11,700

8,400 12,000

ORDERING CODE 0_40704UG 0_40905UG 0_41107UG 0_41109UG 0_41408UG 0_41811UG 0_41814UG 0_42213UG 0_42616UG 0_42823UG 0_43019UG 0_43622UG 0_44229UG

le (mm)

Ae (mm )

Amin (mm2)

Ve (mm3)

WaAc (cm4)

9.9 12.5 15.5 16.2 19.8 25.8 29.3 31.5 37.6 48.1 45.2 53.2 68.6

7 10.1 16.2 16.3 25.1 43.3 42.6 63.4 93.9 128 137 202 265

5.9 8 13.2 13.2 19.8 36 36 50.9 77.4 101 116 172 214

69 126 251 264 495 1,120 1,248 2,000 3,530 6,160 6,190 10,700 18,200

0.001 0.002 0.006 0.008 0.02 0.07 0.103 0.18 0.39 0.71 0.73 1.53 3.69

15,100 17,500

16,000 20,000 28,140 32,667 40,000

MAGNETIC DATA TYPE/SIZE PC 7/4 PC 9/5 PC 11/7 PC 11/9 PC 14/8 PC 18/11 PC 18/14 PC 22/13 PC 26/16 PC 28/23 PC 30/19 PC 36/22 PC 42/29

36 Pot Cores - MAGNETICS

2

Weight

(grams per set)

0.5 1 1.8 1.9 3.2 7.3 6.0 13 20 34 57 104

HOW TO ORDER

O P 4 14 08 UG XX Standard pot core Ferrite core material Used for all ferrite types Approximate diameter in mm Approximate height (per set) in mm Geometry code/gap code Special specification code

GAP CODE

UG – Ungapped Note – Any practical gap available

DIMENSIONS IN MM TYPE/SIZE PC 7/4 PC 9/5 PC 11/7 PC 11/9 PC 14/8 PC 18/11 PC 18/14 PC 22/13 PC 26/16 PC 28/23 PC 30/19 PC 36/22 PC 42/29

A B 7.24 ± 0.15 2.08 ± 0.05 9.3 + 0/-0.3 2.7+ 0/-0.15 11.1 ± 0.2 3.25 ± 0.05 11.28 + 0/-0.4 3.43 ± 0.08 14.3 + 0/-0.5 4.2 ± 0.05 18 ± 0.4 5.3 ± 0.05 18 ± 0.4 7.1 ± 0.2 22 + 0/-0.8 6.7± 0.1 25.5 ± 0.5 8.05 ± 0.1 27.71 ± 0.4 11.43 ± 0.15 30 ± 0.5 9.45 ± 0.05 35.5 ± 0.6 10.95 ± 0.05 42.4 ± 0.7 14.7 ± 0.05

2B 4.16 ± 0.1 5.4 + 0/-0.3 6.5 ± 0.1 6.86 ± 0.16 8.4 ± 0.1 10.6 ± 0.1 14.2 ± 0.4 13.4 ± 0.2 16.1 ± 0.2 22.86 ± 0.3 18.9 ± 0.1 21.9 ± 0.1 29.4 ± 0.1

C D 4.72 nom 1.4 min 6.5 ± 0.25 1.8+ 0.15/-0 6.8 ± 0.25 2.2 + 0.15/-0 7.54 ± 0.2 2.48 ± 0.08 9.5 ± 0.3 2.8 + 0.2/-0 13.4 ± 0.3 3.7 ± 0.1 11.84 ± 0.25 5.05 + 0.2/-0 15 ± 0.4 4.6 + 0.2/-0 18 ± 0.4 5.5 min 19.69 nom 8.15 min 20.5 ± 0.5 6.5 min 26.2 ± 0.6 7.3 min 32 ± 0.7 10.15 min

2D E 2.79 min 5.74 min 3.6 + 0.3/-0 7.5+0.25/-0 4.4 + 0.3/-0 9 + 0.4/-0 4.96 ± 0.16 9 + 0.4/-0 5.6 + 0.4/-0 11.6 + 0.4/-0 7.4 ± 0.2 15.15 ± 0.25 10.1 + 0.4/-0 14 + 0.4/-0 9.2 + .4/-0 17.9+ 0.6/-0 11 min 21.6 ± 0.4 16.3 min 22 min 13 min 25.4 ± 0.4 14.6 min 30.4 ± 0.5 20.3 min 36.3 ± 0.7

F G H 3 max 1.52 min 1.09 ± 0.05 3.9 + 0/-0.2 2 ± 0.2 2.04+0.06/-0 4.7 + 0/-0.2 2.2 ± 0.3 2.1 ± 0.1 4.7 + 0/-0.2 1.8 + 0.3/-0 2 + 0.08/-0 6 + 0/-0.2 2.7+ 1.2/-0 3 + .1/-0 7.45 ± 0.15 3.8 ± 0.6 3.1 ± 0.1 7.4 + 0/-0.3 3.6 + 0.3/-0 3.1 ± 0.8 9.4+ 0/-0.3 3.8 ± 0.6 4.4+ 0.3/-0 11.3 ± 0.2 3.8 ± 0.6 5.5 ± 0.1 12.88 max 3.81 min 5.56 ± 0.1 13.3 ± 0.2 4.3 ± 0.6 5.5 ± 0.1 15.9 ± 0.3 4.9 ± 0.6 5.55 ± 0.15 17.4 ± 0.3 5.1 ± 0.6 5.55 ± 0.15

www.mag-inc.com

37

RS-DS Cores RS-DS CORES Slab cores are modified pot cores with the sides removed. The slabs can be paired with one round half of a standard pot core (RS combination) or two slabs can be paired together for a double slab (DS combination).

The RS geometry offers all the advantages of pot cores for filter applications, plus many additional features for power applications.

DS cores accommodate large size wire and assist in removing heat from the assembly.

Both plain and printed circuit bobbins are available for both types of cores.

Typical applications for RS-DS combinations include; low and medium power transformers, switched-mode power supplies, and converter and inverter transformers.

NOMINAL AL (MH/1000T) TYPE/SIZE DS 14/08 HS 14/08 RS 14/08 DS 18/11 HS 18/11 RS 18/11 DS 23/11 HS 23/11 RS 23/11 DS 23/18 HS 23/18 RS 23/18 DS 26/16 HS 26/16 RS 26/16 DS 30/19 HS 30/19 RS 30/19 DS 36/22 HS 36/22 RS 36/22 DS 42/29 RS 42/29

ORDERING CODE D_41408UG H_41408UG S_41408UG D_41811UG H_41811UG S_41811UG D_42311UG H_42311UG S_42311UG D_42318UG H_42318UG S_42318UG D_42616UG H_42616UG S_42616UG D_43019UG H_43019UG S_43019UG D_43622UG H_43622UG S_43622UG D_44229UG S_44229UG

L

R 1,653 1,533 1,760 3,038 2,666 2,942 3,440 3,200 3,687 2,907 2,600 3,066 3,827 3,630 4,360 4,440 4,227 5,533 5,400

P 1,800 1,667 1,913 3,236 2,827 3,112 3,747 3,460 4,013 3,160 2,820 3,333

ORDERING CODE D_41408UG H_41408UG S_41408UG D_41811UG H_41811UG S_41811UG D_42311UG H_42311UG S_42311UG D_42318UG H_42318UG S_42318UG D_42616UG H_42616UG S_42616UG D_43019UG H_43019UG S_43019UG D_43622UG H_43622UG S_43622UG D_44229UG S_44229UG

le (mm)

Ae (mm )

Amin (mm2)

Ve (mm3)

WaAc (cm4)

22.6 20.6 20.2 29.1 37.2 27.2 26.8 27 28.6 39.9 40.1 41.6 38.9 39 38.3 46.2 46.1 45.6 56.9 57.6 55.4 76 72.3

24.6 21 23 40 31 40.6 51.2 48.2 61 58 53.4 62.2 77 72.1 82.6 117 111 123 162 157 179.5 232 244

23.5 19.2 19.2 36.3 28.7 32.9 37.8 37.8 53.6 40.7 40.7 53.6 62.7 62.7 62.7 96 96 96 140 140 140 211 211

556 433 460 1,167 1,070 1,110 1,370 1,300 1,740 2,310 2,130 2,590 3,000 2,810 3,180 5,410 5,110 5,610 9,250 9,030 9,944 17,600 17,641

0.020 0.017 0.019 0.068 0.053 0.054 0.08 0.075 0.09 0.21 0.19 0.22 0.28 0.26 0.39 0.6 0.56 0.63 1.22 1.18 1.35 3.18 3.35

4,733 4,827 6,027 5,827 5,400 7,580 7,000 8,900

9,944 6,500 8,300

F 2,474 1,990 2,274 3,697 3,197 3,498 4,460 4,170 5,200 3,800 3,350 4,000 5,000 4,600 5,300 5,800 5,525 6,700 6,360 6,050

J 3,260 4,107 4,500 5,174 5,140 5,760 8,400 7,853 7,875 6,347 5,333 6,400 8,093 8,107 8,933 9,493 9,507 11,147 9,000 8,550 13,400

W 3,260 7,043 7,643 7,386 5,899 16,064 14,021 16,071 10,000 10,000 12,000 13,000 13,000 15,714 15,000 15,000 18,571 26,500

MAGNETIC DATA TYPE/SIZE DS 14/08 HS 14/08 RS 14/08 DS 18/11 HS 18/11 RS 18/11 DS 23/11 HS 23/11 RS 23/11 DS 23/18 HS 23/18 RS 23/18 DS 26/16 HS 26/16 RS 26/16 DS 30/19 HS 30/19 RS 30/19 DS 36/22 HS 36/22 RS 36/22 DS 42/29 RS 42/29

38 RS-DS Cores - MAGNETICS

2

Weight

(grams per set)

3.4 2.6 2.8 7.1 6.6 6.8 10 9.1 11.65 13 12.1 17.4 15 14.4 20 22 21 30.95 37 78

HOW TO ORDER

S P 4 23 11 UG XX Shape code Ferrite core material Used for all ferrite types Approximate diameter in mm Approximate height (per set) in mm Geometry code/gap code Special specification code

SHAPE CODE

D – DS Core with solid centerpost H – DS Core with center hole S – RS Core

GAP CODE

UG – Ungapped Note – Any practical gap available

DIMENSIONS IN MM TYPE/SIZE DS 14/08 HS 14/08 RS 14/08 DS 18/11 HS 18/11 RS 18/11 DS 23/11 HS 23/11 RS 23/11 DS 23/18 HS 23/18 RS 23/18 DS 26/16 HS 26/16 RS 26/16 DS 30/19 HS 30/19 RS 30/19 DS 36/22 HS 36/22 RS 36/22 DS 42/29 RS 42/29

A

B

2B

C

14.05 ± 0.25 14 ± 0.25 14 ± 0.25 18 ± 0.4 18 ± 0.4 18 ± 0.4 22.86± 0.46 22.86± 0.46 22.9 ± 0.45 22.86 ±0.46 22.86 ±0.46 22.9 ± 0.45 25.5 ± 0.51 25.5 ± 0.51 25.5 ± 0.51 30 ± 0.51 30 ± 0.51 30 ± 0.51 35.61 ± 0.51 35.61 ± 0.51 35.61 ± 0.51 42.4 ± 0.71 42.4 ± 0.71

4.15 ± 0.08 4.24+0/-0.13 4.24+0/-0.13 5.3 5.3 5.3 ± 0.13 5.54 ± 0.13 5.54 ± 0.13 5.5 ± 0.13 9 ± 0.18 9 ± 0.18 9 ± 0.18 8.05 ± 0.1 8.05 ± 0.1 8.05 ± 0.1 9.4 ± 0.1 9.4 ± 0.1 9.4 ± 0.1 10.85 ± 0.125 10.85 ± 0.125 10.9 ± 0.075 14.8 ± 0.2 14.8 ± 0.2

8.3 ± 0.15 8.48+0/-0.28 8.48+0/-0.28 10.6 ± 0.15 10.6 ± 0.15 10.6 ± 0.15 11.08 ± 0.26 11.08± 0.26 11. ± 0.25 18 ± 0.36 18 ± 0.36 18 ± 0.35 16.1 ± 0.2 16.1 ± 0.2 16.1 ± 0.2 18.8 ± 0.2 18.8 ± 0.2 18.8 ± 0.2 21.7 ± 0.25 21.7 ± 0.25 21.8 ± 0.15 29.6 ± 0.4 29.6 ± 0.4

9.4 ± 0.15 9.4 ± 0.15 9.4 ± 0.15 11.9 ± 0.2 11.9 ± 0.2 11.9 ± 0.2 15.24 ± 0.25 15.24 ± 0.25 15.2 ± 0.25 15.24 ± 0.25 15.24 ± 0.25 15.25 ± 0.25 17.09 nom 17.09 nom 17.09 nom 20.32 ± 0.25 20.32 ± 0.25 20.32 ± 0.25 23.85 nom 23.85 nom 23.85 min 28.4 nom 28.4 nom

D

2D

2.9 ± 0.1 5.8 ± 0.2 2.8 min 5.58 min 2.8 min 5.58 min 3.7 7.4 ± 0.2 3.7 7.4 ± 0.2 ± 3.7 0.1 7.4 ± 0.2 3.63 min 7.26 min 3.63 min 7.26 min 3.75 ± 0.13 7.5 ± 0.25 6.93 min 13.86 min 6.93 min 13.86 min 7.2 ± 0.18 14.4 ± 0.35 5.51 min 11.02 min 5.51 min 11.02 min 5.51 min 11.02 min 6.5 min 13 min 6.5 min 13 min 6.5 min 13 min 7.29 min 14.58 min 7.29 min 14.58 min 7.4 ± 0.1 14.8 ± 0.2 10.21 min 20.42 min 10.21 min 20.42 min

E

F

G

11.8 ± 0.2 11.6 min 11.6 min 15.15 ± 0.25 15.15 ± 0.25 15.15 ± 0.25 17.93 min 17.93 min 18.3 ± 0.35 17.93 min 17.93 min 18.3 ± 0.35 21.21 min 21.21 min 21.21 min 25 min 25 min 25 min 29.9 min 29.9 min 29.9 min 35.61 min 35.61 min

5.9 ± 0.1 5.99 max 5.99 max 7.45 ± 0.15 7.45 ± 0.15 7.45 ± 0.15 9.9 max 9.9 max 9.7 ± 0.2 9.9 max 9.9 max 9.7 ± 0.2 11.48 max 11.48 max 11.48 max 13.51 max 13.51 max 13.51 max 16.1 max 16.1 max 16.1 max 17.7 max 17.7 max

7.6 min 7.6 min 7.6 min 11.2 min 11.2 min 11.2 min 13.21 min 13.21 min 13.2 min 13.21 min 13.2 min 13.2 min 15.5 min 15.5 min 15.5 min 15.49 min 15.49 min 15.49 min 20.3 min 20.3 min 20.3 min 25.0 min 25.0 min

www.mag-inc.com

H 3.1 ± 0.08 3.1 ± 0.08 3.1 ± 0.1 3.1 ± 0.1 5.1 ± 0.1 5.1 ± 0.1 5.08 ± 0.1 5.1 ± 0.1 5.56 ± 0.1 5.56 ± 0.1 5.56 ± 0.1 5.56 ± 0.1

39

RM Cores RM CORES RM cores are square-designed cores that offer all the magnetic and mechanical advantages of pot cores, plus the added feature of maximizing magnetic performance while minimizing PC board space.

Easy to assemble and adaptable to automation, completed units provide at least 40% savings in mounting area compared to a similar size pot core assembly.

Printed circuit bobbins or plain bobbins are available.

Typical applications include differential inductors, power inductors, filter inductors, telecom inductors and broadband transformers.

NOMINAL AL (MH/1000T) TYPE/SIZE RM 4 N RM 4 RM 5 N RM 5 RM 6 N RM 6 RM N LP RM LP RM 7 N RM 8 N RM 8 RM 10 N RM 12 N RM 14 N

ORDERING CODE N_41110UG R_41110UG N_41510UG R_41510UG N_41812UG R_41812UG N_41912UG R_41912UG N_42013UG N_42316UG R_42316UG N_42819UG N_43723UG N_44230UG

L 560 900 1,230 1,250 1,450 1,700 2,200

R 1,125 920 1,720 1,720 2,387 2,187 2,213 1,987 3,058 2,700 2,347 4,047 4,600 7,000

P 1,191 1,000 1,867 1,867 2,600 2,333 2,400 2,169 3,244 2,933 2,560 4,400 5,000 7,540

F 1,333 1,200 2,100 2,100 3,080 2,800 2,880 2,600 3,675 5,210 3,500 5,500 6,000 8,782

J 1,752 1,973 4,133 4,133 6,707 5,973 6,707 5,387 5,001 8,000 6,960 11,800 13,096

W 3,518 3,000 6,000 6,000 8,600 7,714 8,600 7,714 9,571 12,200 10,600 16,000 22,600 20,735

MAGNETIC DATA TYPE/SIZE RM 4 N RM 4 RM 5 N RM 5 RM 6 N RM 6 RM N LP RM LP RM 7 N RM 8 N RM 8 RM 10 N RM 12 N RM 14 N

40 RM Cores - MAGNETICS

ORDERING CODE N_41110UG R_41110UG N_41510UG R_41510UG N_41812UG R_41812UG N_41912UG R_41912UG N_42013UG N_42316UG R_42316UG N_42819UG N_43723UG N_44230UG

Weight

le (mm)

Ae (mm )

Amin (mm2)

Ve (mm3)

WaAc (cm4)

(grams per set)

23.3 20.6 23.2 21.4 27.5 25.6 29.2 27 30 38.4 35.5 44.6 56.6 70

13.8 10.8 24.8 21 38 32 37 31 44.1 63 52 96.6 146 198

11.5 7.9 18.1 13.9 31.2 22.6 31.2 22.6 39.6 55.4 36.9 89.1 125 168

322 222 574 449 1,040 819 1,090 837 1,325 2,440 1,850 4,310 8,340 13,900

0.010 0.008 0.02 0.02 0.05 0.05 0.05 0.05 0.14 0.15 0.15 0.44 1.02 1.72

1.5 1.6 3.3 3 5.4 5.1 5.1 4.8 6 13 10.4 23 42 70

2

HOW TO ORDER

R P 4 15 10 UG XX Shape code Ferrite core material Used for all ferrite types Approximate length in mm Approximate height (per set) in mm Geometry code/gap code Special specification code

SHAPE CODE

N – RM Core with solid centerpost R – RM Core with center hole

GAP CODE

UG – Ungapped Note – Any practical gap available

DIMENSIONS IN MM TYPE/SIZE RM 4 N RM 4 RM 5 N RM 5 RM 6 N RM 6 RM N LP RM LP RM 7 N RM 8 N RM 8 RM 10 N RM 12 N RM 14 N

A 11 + 0/-0.5 11.8 max 14.6+ 0/-0.6 14.9 max 17.9+0/-0.7 18.3 max 18.3 max 18.3 max 20.3+ 0/-0.8 23.2+ 0/-0.9 23.2 max 28.5+ 0/-1.3 37.4+ 0/-1.3 42.2+ 0/-1.4

B 5.2 ± 0.05 5.2 ± 0.05 5.2 ± 0.05 5.2 ± 0.05 6.2 ± 0.05 6.2 ± 0.05 6.2 ± 0.05 6.2 ± 0.05 6.7 ± 0.05 8.2 ± 0.05 8.2 ± 0.05 9.3 ± 0.05 12.25 ± 0.05 15.05± 0.05

2B C 10.4 ± 0.1 4.6+0/-0.2 10.4 ± 0.1 4.45 nom 10.4 ± 0.1 6.8 +0/-0.4 10.4 ± 0.1 6.6 nom 12.4 ± 0.1 7+ 0/-0.4 12.4 ± 0.1 7.4 nom 12.4 ± 0.1 8.2 nom 12.4 ± 0.1 8.2 nom 13.4 ± 0.1 16.4 ± 0.1 11+0/-0.5 16.4 ± 0.1 10.8 nom 18.6 ± 0.1 13.5+0/-0.5 24.5 ± 0.1 16.1+ 0/-0.5 30.1 ± 0.1 19+0/-0.6

D 3.5+0.2/-0 3.61 ± 0.1 3.25 ± 0.1 3.25 ± 0.1 4 + 0.2/-0 4.1 ± 0.1 4.1 ± 0.1 4.1 ± 0.1 4.2+ 0.25/-0 5.5 ± 0.1 5.53±0.13 6.2+ 0.3/-0 8.4 + 0.3/-0 10.4+ 0.3/-0

2D 7+ 0.4/-0 7.21 ± 0.2 6.5 ± 0.2 6.5 ± 0.2 8 + 0.4/-0 8.2 ± 0.2 8.2 ± 0.2 8.2 ± 0.2 8.4 + 0.5/-0 11 ± 0.2 11.05 ± 0.25 12.4 + 0.6/-0 16.8 + 0.6/-0 20.8 + 0.6/-0

E 7.95 + 0.4/-0 8.15 ± 0.2 10.2 +0.4/-0 10.4 ± 0.2 12.4+0.5/-0 12.65 ± 0.25 12.65± 0.25 12.65 ± 0.25 14.75 + 0.6-0 17+0.6/-0 17.35 ± 0.35 21.2 + 0.9/-0 24.9 +1.1/-0 29+ 1.2/-0

F 3.9+0/-0.2 3.8 ± 0.1 4.9 + 0/-0.2 4.8 ± 0.1 6.4 + 0/-0.2 6.25 ± 0.15 6.25 ± 0.15 6.25 ± 0.15 7.25+0/-0.3 8.55 + 0/-0.3 8.4 ± 0.15 10.9 + 0/-0.4 12.8 + 0/-0.4 15 + 0/-0.6

G 5.8 min 5.79 ref 6 min 6.71 nom 5.85 nom 5.85 nom 9 nom 9 nom 9.3 min 9.5 min 11.7 nom 10.9 min 12.9 min 17 nom

H 2.05 ± 0.05 2.05 ± 0.05 3.05± 0.05 3.05± 0.05

4.5 ± 0.1

J 9.8 + 0/-0.4 9.6 ± 0.2 12.3+ 0/-0.5 12.05 ± 0.25 14.7+ 0/-0.6 14.4 ± 0.3 14.4 ± 0.3 14.4 ± 0.3 17.2 + 0/-0.7 19.7+ 0/-0.8 19.3 ± 0.4 24.7 + 0/-1.1 29.8 + 0/-1.1 34.8 + 0/-1.3

www.mag-inc.com

41

EP Cores EP CORES EP cores are round center-post cubical shapes which enclose the coil completely except for the printed circuit board terminals. This particular shape minimizes the effect of air gaps formed at mating surfaces in the magnetic path and provides a larger volume ratio to total space used. EP cores provide excellent shielding.

NOMINAL AL (MH/1000T) TYPE/SIZE EP 7 EP 10 EP 13 EP 17 EP 20

ORDERING CODE P_40707UG P_41010UG P_41313UG P_41717UG P_42120UG

L 590 530 760 1,120 1,930

R 1,080

P 1,173

1,533

1,667 2,600 4,600

ORDERING CODE P_40707UG P_41010UG P_41313UG P_41717UG P_42120UG

le (mm)

Ae (mm )

Amin (mm2)

15.5 19.3 24.2 29.5 41.1

10.7 11.3 19.5 33.7 78.7

8.55 8.55 14.9 25.5 60.8

4,227

F 1,240 1,200 2,000 3,100 5,000

J 2,573 2,467 3,733 5,867 9,600

W 5,143 4,800 7,143 11,429 19,286

Ve (mm3)

WaAc (cm4)

(grams per set)

165 215 472 999 3,230

0.003 0.01 0.03 0.08 0.24

1.4 2.8 5.1 11.6 27.6

Printed circuit bobbins, surface mount bobbins and mounting clamp assemblies are available.

Typical applications for EP cores include differential and telecom inductors and power transformers.

MAGNETIC DATA TYPE/SIZE EP 7 EP 10 EP 13 EP 17 EP 20

42 EP Cores - MAGNETICS

2

Weight

HOW TO ORDER

P J 4 10 10 UG XX Shape code Ferrite core material Used for all ferrite types Approximate length in mm Approximate height (per set) in mm Geometry code/gap code Special specification code

SHAPE CODE P – EP Core

GAP CODE

UG – Ungapped Note – Any practical gap available

DIMENSIONS IN MM TYPE/SIZE EP 7 EP 10 EP 13 EP 17 EP 20

A B 9.2 ± 0.2 3.7 ± 0.5 11.5 ± 0.3 5.15 ± 0.1 12.8 + 0/-0.6 6.45 ± 0.08 18 ± 0.4 8.4 ± 0.1 24 ± 0.5 10.7 ± 0.1

2B 7.4 ± 0.1 10.3 ± 0.2 12.9 ± 0.16 16.8 ± 0.2 21.4 ± 0.2

C 6.35 ± 0.15 7.6 ± 0.2 9 + 0/-0.4 11 ± 0.25 15 ± 0.35

D 2.5 min 3.6 min 4.5 + 0.2/-0 5.7 ± 0.15 7.2 ± 0.15

2D 5.0 min 7.2 min 9 + 0.4/-0 11.4 ± 0.3 14.4 ± 0.3

E F 7.2 min 3.4 max 9.2 min 3.45 max 9.7 + 0.6/-0 4.5 + 0/-0.3 12 ± 0.4 5.7 ± 0.18 16.5 ± 0.4 8.8 ± 0.25

K 1.7 ± 0.1 1.85 ± 0.1 2.4 ± 0.1 3.3 ± 0.2 4.5 ± 0.2

www.mag-inc.com

43

Hardware HARDWARE SIZE TYPE 0200

0301

0401

0402

TC

TC

TC

TC

0502

TC

0503

TC

0601

TC

0603

TC

0704 0705 0707

PC TC EP

0905

PC

0906

ER

1009

EFD

1010

EP

1107

PC

1110

RM

1208 1212

EFD EFD

1313

EP

1406 1407

TC TC

P/N SMC03016A SMC06018A SMH05025A SMH07058A SMC03016A SMC06018A SMH05025A SMH07058A SMC06018A SMH05025A SMH07058A SMC06018A SMH05025A SMH07058A SMC06018A SMH05025A SMH07058A SMC06018A SMH05025A SMH07058A SMC06018A SMH07058A SMC06018A SMH07058A 00B070401 SMH07058A 0AC070716 0BC070712 PCB07076B SMB07076A 00B090501 00C090511 00C09061A SMB09068A 00C1009B1 PCB1009B1 00C10102A PCB10108A SMB10108A PCB101081 00B110701 00B1107A2 00C110711 00C111012 PCB11104A 00B120801 00C1212B1 PCB1212B1 0AC131316 0BC131314 PCB1313TB SMB1313TA TVB22066A TVH22064A TVB22066A TVH22064A

SIZE TYPE 1408

PC

1434 1450

P-EC TC

1506

TC

1510

RM

1515

EFD

1605

TC

1717

EP

1805 1808

P-EC EC

1809

TC

1810 1811

EC PC

1812

RM

44 MAGNETICS

P/N 00B140801 00B140802 00C140811 00W140815 PCB140811 PCB140812 PCB140821 PCB140822 PCB140861 PCB1408S1 TBA140800 TCA1408B1 TCA1408C3 00C143420 TVB22066A TVH22064A TVB22066A TVH22064A 00C111012 PCB15104A PCB15104B PCB151061 PCB151081 TBP151000 TCF1510R1 00C15151A PCB15158A SMB1515TA 00C1515B1 PCB1515B1 TVB22066A TVH22064A 00C17172A PCB17178A 00C180520 00B180801 PCB1808B1 TVB2206A TVH22064A 00B18100A 00B181101 00B181102 00B181103 00C181111 00W181118 PCB181111 PCB181112 PCB181121 PCB181122 TCA1811B1 00C181211 PCB181241 PCB181261 TBA181201 TCA1812C2

SIZE TYPE 1912

2016 2019 2020 2106

2109

2120

2206

2207

2212

2213

2216 2311 2316

2318 2507

RM

P/N

00C181211 PCB181241 PCB181261 TBA181201 TCA1812C2 EP 00C201612 PCB2016FB EFD 00C2019B1 PCB20119B1 PQ PCB2020FB PQ TVB22066A TVB2908TA TVH22064A TVH25074A TC TVB22066A TVB2908TA TVH22064A TVH25074A EP 0AC212016 0BC212016 PCB2120TB TC TVB22066A TVB2908TA TVH22064A TVH25074A TC TVB22066A TVB2908TA TVH22064A TVH25074A TC TVB22066A TVB2908TA TVH22064A TVH25074A PC 00B221301 00B221302 00B221303 00C221314 00W221324 0PC221314 PCB221311 PCB221312 PCB221321 PCB221322 TBP221300 TBP2213A0 TCF2213B1 P-EC 00C221620 RS/DS PCB2311T1 RM 00C231615 PCB231651 PCB231652 PCB231681 RM PCB2318T1 TC TVB2908TA TVH22064A TVH25074A

SIZE TYPE 2508

2510

2515 2520 2523

2616

2620 2625 2819 2823 2908

2915 2929 3007 3009 3019

3030 3113

TC

P/N

TVB2908TA TVH22064A TVH25074A EC 00B251001 PCB2510V1 PCB2510V2 EC-IC 00B251501 EC PCB2520TA EFD 00C25231A PCB2523TA 00C2523B1 PCB2523B1 PC 00B261601 00B261602 00B261603 00C261614 OPC261614 PCB261611 PCB261612 PCB262613 PCB261621 PCB261622 PCB2616TA TBP669000 TCF2800B1 PQ 00C262012 PCB2620LA PQ 00C262512 PCB2625LA RM 00C281916 PCB2819L1 PC 00B282301 TC TVB2908TA TVB3610FA TVH25074A TC TVB2908TA TVB3610FA TVH25074A ETD 00C2929B1 PCB2929B1 EC PCB3007T1 EC PCB3009LA RS/DS 00B301901 00B301902 00B301903 00C301917 PCB301911 PCB301921 PCB3019T1 TBP669000 TCF2800B1 EFD 00C3030B1 PCB3030B1 TC TVB2908TA TVB3610FA

SIZE TYPE 3205

TC

3220

PQ

3230

PQ

3434

ETD

3515

EC

3517

EC

3521 3535

EER PQ

3610 3615

TC TC

3622

PC

3723 3806

RM TC

3813

TC

3825

TC

3939

ETD

4015 4020

TC EC-IC

4022 4040

EC PQ

4119

EC

P/N

SIZE TYPE

P/N

TVB3610FA TVH38134A 00C322017 PCB3220B1 00C323017 PCB3230B1 00C343416 PCB3434FB PCB343414 00B351501 PCB3515M1 PCB3515M2 PCB3515L2 00B351701 0AC35171 0CC351700 PCH351701 PCB3521LA 00C353517 PCB3535LA TVH38134A TVB3610FA TVH38134A 00B362201 00B362202 00C362200 00C362217 PCB362211 PCB3622L1 TBP669000 TCF2800B1 TCF4000B1 PCB3723L1 TVB3610FA TVH38134A TVB3610FA TVH38134A TVH49164A TVB3610FA TVH38134A TVH49164A 00C393916 PCB3939SB TVH49164A 00B402011 PCB4020M1 PCB4022M1 00C404017 PCB4040FA 00B411901 0AC411919 0BC411940 0CC411900 PCB411901 PCH411901

4216 EER 4229 PC

PCB4216FA 00B422901 00B422902 00C422917 PCB4229L1 TBP669000 TCF2800B1 TCF4000B1 00B431701 PCB4317M1 TVH49164A 00C444416 PCB444418 PCB4444WB TVH49164A PCB4721M1 TVH49164A TVH49164A TVH49164A TVH49164A 00C494916 PCB494920 PCB4949WA 0AC522423 0BC522440 0CC522400 PCB522401 PCH522401 00B5224B1 00C5454B1 PCB5454B1 00B5528B1 PCB5528WB PCB5530FA 00B572401 PCB5724M1 00C581001 00C581002 00C595916 PCB5959AA TVH49164A TVH61134A TVH49164A TVH61134A 00C641001 00C641002 00B652701 00B703501 0AC703531 0BC703540 PCB703501 PCH703501 00B722801 00B802001 00B802002

4317

EC

4416 4444

TC ETD

4715 4721 4916 4920 4925 4932 4949

TC EC TC TC TC TC ETD

5224

EC

5454

ETD

5528

EC

5530 5724

EC EC

5810

EC-IC

5959

ETD

6113

TC

6326

TC

6410

EC-IC

6527 7035

EC-IC EC

7228 8020

EC EC

Other Products from Magnetics POWDER CORES

Powder cores are excellent as low loss inductors for switched-mode power supplies, switching regulators and noise filters. Most core types can be shipped immediately from stock.

Kool Mµ ® powder cores have a higher energy storage capacity than MPP cores and are available in five permeabilities from 26µ through 125µ. Kool Mµ toroids are available in sizes identical to MPP cores, and extremely large (>4.0” or 101.6 mm) toroids/shapes are possible with interlocking Kool Mµ segments. This material is also available in a number of E-core sizes.

Permeability for Kool Mµ E-cores is from 26 to 90 and sizes are tooled ranging from the EF 12.6 to the 160LE size. Kool Mµ blocks and U cores are also available.

Molypermalloy powder cores (MPP) are available in ten permeabilities ranging from 14 through 550, and have guaranteed inductance limits of ±8%. Insulation on the cores is a high dielectric strength finish not affected by normal potting compounds and waxes. Thirty sizes include I.D.s from 0.070” (1.78 mm) to 1.938” (49.2 mm) and O.D.s from 0.140” (3.56 mm) to 3.063” (77.8 mm). Standard cores include either temperature stabilized (as wide as -65° C at 125° C for stable operation) or standard stabilization.

High Flux powder cores have a much higher energy storage capacity than MPP cores and are available in six permeabilities from 26µ through 160µ. High Flux cores are available in sizes identical to MPP cores.

Magnetics XF LUX ™ distributed air gap cores are made from 6.5% silicon iron powder. A true high temperature material, with no thermal aging, XF LUX ™ offers lower losses than powder iron cores and superior DC Bias performance. The soft saturation of XF LUX ™ material offers an advantage over ferrite cores. XF LUX ™ cores are ideal for low and medium frequency chokes where inductance at peak is critical.

MPP THINZ ® are extremely low height (<1 mm) self-shielded power inductor cores, allowing finished inductor heights in the 1.5 mm to 2 mm range. THINZ come in 5 sizes with O.D.s ranging from 3.05 mm through 78 mm and four permeabilities: 125µ, 160µ, 200µ and 250µ.

For further information view the Powder Cores Design Manual at www.mag-inc.com.

STRIP WOUND CORES

Tape wound cores are made from high permeability alloys of nickel-iron, grain oriented silicon-iron. The alloys are known as Orthonol ®, Alloy 48, Square Permalloy 80, Supermalloy and Magnesil®. Cores are available in more than 50 standard sizes.

For a wide range of frequency applications, materials are produced in thicknesses from 1/2 mil(0.013 mm) through 14 mils (0.356 mm). Cases are robust nylon boxes, rated for 200° C continuous operation and 2000 voltage minimum breakdown.

Applications include: magnetic amplifiers, reactors, regulators, static magnetic devices and current transformers.

Miniature Tape Wound Bobbin Cores are manufactured from Permalloy 80 and Orthonol ultra-thin tape (0.000125” to 0.001” thick). They are available in widths from 0.031” to 0.250” (wider on special request). Wound on non-magnetic stainless steel bobbins, core diameters are available down to 0.050”, with flux capacities as low as several maxwells.

Magnetics’ sophisticated pulse test equipment reproduces most test programs and can measure accurately in the millivoltmicrosecond region.

Applications include: magnetometers, flux gates, oscillators, inverters and magnetic amplifiers.

For further information view the Strip Wound Cores Catalog at www.mag-inc.com.

www.mag-inc.com Magnetics 1 800 245 3984 1 412 696 1333 magnetics@spang.com Magnetics International +852 3102 9337 asiasales@spang.com Š 2009 Magnetics P.O. Box 11422, Pittsburgh, PA 15238-0422