Advanced Engineering UK 2013 Show Guide 2013 – Presentations

The ADVANCED ENGINEERING UK 2013 group of events

guide to free-to-attend open conference sessions

DAY 1 – TUESDAY 12th NOVEMBER, 2013 PARALLEL OPEN CONFERENCE SESSIONS 10.00 – 11.00am Forum 1 10.00-10.15 Aerospace

Materials Processing How SAFRAN AIRCELLE solved their future needs for high precision metal and composite parts cleaning Richard Starkey, Regional Sales Manager UK & Ireland, SAFECHEM Europe

Aerospace

10.15-10.30

Materials Processing Application of Machining Dynamics Theory against Vibration Issues in Machining Processes in Aerospace Industry Dr Erdem Ozturk, Technology Fellow, AMRC with Boeing

Adv. Engineering

10.30-10.45

Additive Manufacturing Additive Manufacture of Low Volume Tooling Dr Benjamin Wood, Technology Transfer Specialist, WMG – University of Warwick

Aerospace

10.45-11.00

Careers Development Career Engagement & Recognition Rosalind Azouzi, Careers and Education Manager, Royal Aeronautical Society (RAeS)

Forum 2 10.00-10.15

Automotive

Low Carbon Vehicle Engineering Delivering high performance at reduced cost by optimising Battery Management Strategies Puneet Mathur, Senior Engineer – Battery Management Systems, MIRA Ltd

Automotive

Low Carbon Vehicle Engineering Developing Automotive Ancillaries for High Voltage Operation Paul Furmston, Lead for New Product Development, TRW Conekt

10.15-10.30

Automotive

10.30-10.45

Low Carbon Vehicle Engineering Application of flywheel KERS technology to reduce fuel consumption of a city bus Tobias Knichel, Commercial Manager, Flybrid Automotive Ltd

Automotive

10.45-11.00

Low Carbon Vehicle Engineering

Design of Advanced Hydraulic Control Systems for Automatic, Dual Clutch and Automated Manual Transmissions Martin Maier, Managing Director, hofer mechatronik & hofer powertrain UK Ltd

Forum 3 10.00-11.00 Composites

Emerging Technology – Thermoplastics (Hosted by NetComposites) • 10.00: Natural Fibre Long Fibre Thermoplastics – Chris Hare, Technical Manager, NetComposites Limited • 10.20: Thermoplastic composites using nonwoven materials – Dr Anthony Abbot, Materials Specialist, Technical Fibre Products • 10.40: Low Cost Prototyping of Complex Thermoplastic Components – Nigel Finney, Senior Project Engineer, EPL Composite Solutions Ltd

Forum 4 10.00-10.15

Composites Process & Capability Advances

Polyurethane Resins in Reinforced Composite Manufacture by Resin Transfer Moulding Andy MacInally, Market Development Manager for Sika Composites, John Burn Ltd

Composites

10.15-10.30

Process & Capability Advances Hot Drape Forming Ian Jenner, Managing Director, AIC Group Ltd

Composites

10.30-10.45

Process & Capability Advances A New and fast way to mould composites. Vacuum Press Infusion (VPI) Alan Harper, Chief Executive Officer, Alan Harper Composites Ltd

Composites

10.45-11.00

Process & Capability Advances Step Sanded Repairs in Composites Reducing Turn Around Time whilst Improving Quality and Consistency Rodney Hanson, Managing Director, Dark Matter Composites Ltd

Forum 5 10.00-10.15

Printable Electronics

Printable Electronics ‘101’ Introduction to the concepts, technologies, processes & applications in printed & organic Electronics Dan Rogers, Managing Editor, +Plastic Electronics

10.15-10.30

Printable Electronics

Materials & Processes Printable high mobility organic semiconductors Dr Changsheng Wang, Research Scientist, Merck Chemicals

Printable Electronics

10.30-10.45

Applications Flexible plastic displays enabling truly wearable applications Jan Jongman, Senior Manager – Technology Development, Plastic Logic

Printable Electronics

10.45-11.00

Applications Printed interconnects for aerospace helmet head tracking systems Mau Yuen Chan, Research Engineer, BAE Systems

Programme is correct at time of going to press, and may be subject to change – check programme boards onsite at the show

DAY 1 – TUESDAY 12th NOVEMBER, 2013 PARALLEL OPEN CONFERENCE SESSIONS 11.00 – 12.00 noon Forum 1 11.00-11.15 Aerospace

11.15-11.30

11.30-11.45

11.45-12.00

Supply Chain Opportunities Supplier opportunities and readiness for the Nuclear Industry Denzil Lawrence, Technology Transfer, Nuclear AMRC

Aerospace Programme Insight A350 Rear Spar and Fixed Trailing Edge Assembly in Western Approach, Bristol Chris Gear, Vice President Chief Engineering, GKN Aerospace Aerospace Careers Development Employer Led Apprenticeships – A Global Solution Alison Bettac, Director of Training, AMRC Training Centre Aerospace Regional Insight Aerospace in the Black Country Simon Warren, Chief Executive, Wolverhampton City Council

Forum 2 11.00-11.15 Automotive Vehicle Innovation

The design of a novel electric vehicle drive train to improve the safety of a vehicle upon impact Marc Greatrex, Head of Business Development UK, Pera Technology Ltd

Automotive EV Drivetrain Engineering ODIN using advanced simulation to ensure efficient and quiet operation of an integrated EV drive train Barry James, Chief Technical Officer – Drivetrain, Romax Technology Ltd

11.30-11.45

11.45-12.00

Advanced Engineering Engineering Business Are you a company? Have you claimed for R&D? Reduce your corporation tax bill or possibly get money back – Find out how!

Steve Harris, Business Unit Head, Cambridge R&D Unit (HMRC)

Forum 3 11.00-11.30 Composites

11.30-11.45

11.45-12.00

Composites Materials & Process Innovations (Hosted by RAPRA – Rubber And Plastics Research Association) • 11.00-11.15: Composites in Big Science – Simon Canfer, Composites Group Leader at the Science & Technology Facilities Council (STFC) • 11.15-11.30: Developments in the Fire Testing and Certification of Composites used in Transport Applications – Dr Janet Murrell, Technical Manager, EXOVA, WarringtonFire

Composites Digital Engineering Simulation of Composites Manufacturing Processes with Springback Dr Rajab Said, Technical Business Development Manager, ESI Group Composites Digital Engineering Rapid Composite Product Development Techniques Martin Gambling, Managing Director, GRM Consulting Ltd

Forum 4 11.00-12.00 UK Trade & Investment Export Spotlight Advanced Manufacturing Opportunities in Brazil, China and Mexico

(Hosted by Paul Calver, UKTI Sector Specialist, Advanced Manufacturing, Strategic Trade Group, UK Trade & Investment) • 11.00: Mexico – Carlos Botello, Senior Trade Officer, British Consulate Monterrey • 11.20: China – Ian Lockhart, First Secretary (Trade & Investment) – Advanced Engineering & Transport, UK Trade & Investment – British Embassy Beijing • 11.40: Brazil – Chris Wall, UKTI Supply Chain Specialist, UKTI-Brazil

Forum 5 11.00-11.15 Advanced Engineering

11.15-11.30

11.30-11.45

11.45-12.00

Regional Initiatives The Black Country Offer Stewart Towe, Chair of the Black Country Local Enterprise Partnership

Advanced Engineering Regional Initiatives Black Country Bullet: Achieving Total Regional Supply Chain Fulfilment Matt Neal, Marketing Director, Rimstock Plc & Current Touring Car Champion Advanced Engineering Regional Initiatives Advanced engineering/manufacturing in Greater Lincolnshire Ruth Carver, LEP Manager, Greater Lincolnshire Local Enterprise Partnership Advanced Engineering Regional Initiatives Choosing Where and How to Expand: Telford as an Example Adam Breeze, Inward Investment Specialist, Telford & Wrekin Council

Programme is correct at time of going to press, and may be subject to change – check programme boards onsite at the show

DAY 1 – TUESDAY 12th NOVEMBER, 2013 PARALLEL OPEN CONFERENCE SESSIONS 12.00 noon – 13.00pm Forum 1 12.00-12.15 Aerospace

12.15-12.30

12.30-12.45

12.45-13.00

Sector Landscape UK Aerospace Sector Growth – Aerospace Growth Partnership (AGP) Paul Everitt, Chief Executive, ADS

Aerospace Sector Landscape Aerospace Technology Institute (ATI) Gavin Campbell, Chair: AGP Technology Working Group Aerospace Sector Landscape Future aerospace supply chain requirements – a wake-up call Martin Wright, Chief Executive Officer, North West Aerospace Alliance (NWAA) Aerospace Russian Aerospace Supply Chain Opportunities Russian Aerospace Market / UK supply chain opportunities Paul Calver, UKTI Sector Specialist, Advanced Manufacturing, Strategic Trade Group, UK Trade & Investment

Forum 2 12.00-12.15 Automotive

12.15-12.30

12.45-13.00

Forum 3 12.00 – 12.15

12.15-12.30

12.30-12.45

12.45-13.00

Powertrain Engineering European transmission market overview: What are the key driving factors? How will these affect transmission development in the next few years?

Wajih Hossenally, Analyst LV Powertrain, IHS Automotive, Powertrain Team

Automotive Nonwovens Applications Rapid growth of nonwovens in automotive applications – supporting lightweight and more fuel-efficient vehicles Dr George Kellie, Director, KellieSolutions™.

Automotive Strategic Partnership Why partnership and collaboration are essential to UK innovation and success Antony Harper, Head of Research, Jaguar Land Rover Composites

Composites in Motorsport PLM in Motorsport – The key to success (Supported by Motorsport Industry Association MIA) Simon Rogers, Account Manager, Team Engineering

Advanced Engineering UK Industry Landscape UK Manufacturing – the big picture Andrew Buckley, Membership Director, EEF the manufacturers’ organisation Composites Digital Engineering From Black Metal to Optimal use of Composites Jean-Francois Maiziere, Sales Director Europe – CATIA – Mechanical, Dassault Systèmes Composites Digital Engineering

A pragmatic approach to achieving cost reduction through simulation of composite manufacturing processes Nigel Pready, Senior Consultant, Frazer-Nash Consultancy

Forum 4 12.00-12.15 Advanced Engineering

12.15-12.30

12.30-12.45

12.45-13.00

Measurement & Testing Latest developments in optical metrology applications Kevin Hawley, Sales Manager, GOM UK Ltd

Advanced Engineering Measurement & Testing State of the Art real time material property measurement capabilities in Video Extensometry Tim Hawes, Business Manager – Material Test, Imetrum Ltd Composites Performance Composites – Pushing the Limits Optimisation of the composite structure of the Olympic Bicycle Frame Dimitris Katsanis, Director, Metron Advanced Equipment Ltd Composites Performance Composites – Pushing the Limits Challenges facing the composite armoured vehicle designer Dr Mark French, Principal Engineer, QinetiQ & Matt Sellens, Business Development Manager, Formaplex

Forum 5 12.00-12.30 Advanced Engineering

12.30-13.00

Electronics Innovation Innovation & the UK’s Electronics Industry Ashley Evans, Chief Executive, Electronics Technology Network

Printable Electronics Sector Study Printable Electronics Sector Study Chris Jones, Vice Chairman, The Plastic Electronics Leadership Group (PELG)

Programme is correct at time of going to press, and may be subject to change – check programme boards onsite at the show

DAY 1 – TUESDAY 12th NOVEMBER, 2013 PARALLEL OPEN CONFERENCE SESSIONS 13.00 – 14.00pm Forum 1

13.00-13.30

Advanced Engineering

Maintaining High Value Manufacturing Capability in the UK

(Hosted by HVM Catapult) • 13.00 HVM Catapult – a progress report – Dick Elsy, Chief Executive, High Value Manufacturing Catapult • 13.15 Advanced Engineering – driving growth in the UK economy – Lord Paul Drayson, Managing Partner, Drayson Racing Technologies

Aerospace UK Aerodynamics UK Aerodynamic Research Frank Ogilvie, Chief Aerodynamicist, UK Aerodynamics Centre

13.30-13.45

13.45-14.00

Forum 2

13.00-13.30

13.30-14.00

Advanced Engineering Supply Chain Networks valuechain.com... creating value through collaborative supply chain networks Tom Dawes, CEO, DNA Agile Group Ltd Automotive Low Carbon Vehicle Engineering “Life Without Oil? – Developments in Low Carbon Vehicle Technologies” / Microcab Project Insight Bernard Porter, Director – Low Carbon Vehicles Programmes, & John Jostins, Professor of Sustainable Transport Design, Coventry University Advanced Engineering Regional Initiatives Focus Wales Engineered in Wales – enabling global technologies Robert Kathro, CEO, Industry Wales & Chris Meadows, Corporate Communications Director, IQE plc

Forum 3 13.00-13.30 Composites

13.30-13.45

13.45-14.00

Making the UK Composite Industry Work (Chaired and Hosted by Chris Little, Chairman, CompositesUK) Composites Leadership Forum – results from the report and strategy for the CLF to take this forward • Peter Chivers, Chief Executive, National Composites Centre • Alison Starr, Chair of the Composites Leadership Forum

Composites Process & Capability Advances – Thermoplastics The driving force behind thermoplastic composite change Dr John Darlington – Head of Product Management, TenCate Advanced Composites EMEA Composites Process & Capability Advances – HT Thermoset Technologies Development and Manufacture of High Temperature Composite Aero Engine Parts Mark Lees, Technology Leader, Cobham Composite Technologies

Forum 4 13.00-14.00 Composites

NDT: Underpinning the Advance of Engineering (Hosted by The British Institute of Non-Destructive Testing (BINDT)) NDT: Underpinning the Advance of Engineering • 13.00: A landscape for the future of NDT in the UK economy – a Knowledge Transfer Network report – Keith Newton, Research Centre for NDE and Robin Young, Materials KTN • 13.15: The role of personnel certification – Cameron Sinclair, CEO, The British Institute of Non-Destructive Testing • 13.30: Understanding NDT data Mr Alan Hunscott, Technical Support Manager, GE Inspection Technologies, Measurement & Control • 13.45: Advanced ultrasound inspection of high performance composite structures for production QA and in-service damage assessment Richard Freemantle, Managing Director, Wavelength NDT Ltd

Forum 5 13.00-13.30 Automotive Electronics

13.30-13.45

13.45-14.00

Electric Land Vehicles Electric Land Vehicles: Everything Will Change Dr Peter Harrop, Chairman, IDTechEx

Automotive Electronics Technology & Innovation Flexible multiport DC/DC converter reduces cost, weight and space, and increases EV range Mark Willows, Technical Specialist Electrical Systems & Control, Prodrive Automotive Electronics Technology & Innovation Real-Time testing with AUTOSAR compliant code for ECU software development and verification Dariusz Cieslar, Applications Consultant, dSPACE Ltd

Programme is correct at time of going to press, and may be subject to change – check programme boards onsite at the show

DAY 1 – TUESDAY 12th NOVEMBER, 2013 PARALLEL OPEN CONFERENCE SESSIONS 14.00 – 15.00pm Forum 1 14.00-14.15 Advanced Engineering

14.15-14.30

14.30-15.00

Digital Manufacturing Digital Manufacturing Across the Supply Chain Juergen Maier, Managing Director, Siemens Industry Sector UK and Ireland

Advanced Engineering REACH How to stop REACH disrupting production Julian Ross, HSCE Consultant (Climate and Environment), EEF the manufacturers’ organisation Aerospace Supply Chain Readiness SC21: 21st Century Supply Chains (Hosted by ADS Group) • 14.30 Update on the Industry SC21 programme and future developments – Phil Curnock, Head of Supply Chain, ADS • 14.45 NATEP Programme SME Technology funding opportunities – Dave Dawson, NATEP Programme Director, ADS

Forum 2 14.15-14.30 Automotive

14.30-15.00

Ultra Lightweight Vehicles Affordable Carbon Fibre Crash Structures for Ultra Lightweight Vehicles Dr Kevin Lindsey, Technical Director, FAR-UK Ltd

Automotive Test Engineering Smarter Testing (Hosted by the Engineering Integrity Society) Geoff Rowlands, Senior Engineer, MIRA Ltd / Norman Thornton, Consultant Engineer

Forum 3 14.00-15.00 Composites

Emerging Technology – Bio Composites (Hosted by NetComposites) • 14.00: The reaction to fire of biocomposites based on natural fibres and poly-furfuryl alcohol resins – Dr Anthony Stevenson, Project Manager, NetComposites Ltd • 14.20: Emerging biocomposite technologies: solutions for 21st century engineering challenges – Liliya Serazetdinova, Biorenewables Consultant & Dr Mark Coleman, Lecturer, University of East Anglia • 14.40: Regenerated cellulose based textile reinforced composites Shanta Desai, Materials Development Engineer, Composites Evolution Ltd

Forum 4 14.00-14.30 Composites

14.30-14.45

14.45-15.00

AMSCI Round 2 Composites Innovation Cluster (CiC) AMSCI Round 2 Composites Innovation Cluster (CiC), updates/results (Hosted by CompositesUK) • CiC StrategicAims – Will Searle, Managing Director, Axillium Research • CiC Technology – Elaine Arnold, Collaborative R&T Project Manager, Cytec • COMPFORE: Foresight Model to Strengthen Existing Supply Chains – Dr Adrian Coronado, Senior Lecturer, Royal Hollaway University of London

Advanced Engineering Digital Engineering Direct Modelling: Addressing the Complexity of CAD Chris Dukes, Director, Eng IT (on behalf of SpaceClaim) Advanced Engineering Digital Engineering Simulation-Driven Product Development – Engineering the Impossible Dr John Lin, Technical Engineer, ANSYS UK Ltd

Forum 5 14.00-14.30 Electronics

14.30-15.00

UK Electronics Systems Sector ESCO – Electronic Systems Challenges & Opportunities Warren East, Chairman of the Electronic Systems Community Leadership Council

Automotive/Electronics Printable Electronics for Automotive Printable Electronics for Automotive Applications (Hosted by Centre for Process Innovation – CPI) Jon Helliwell, Director of Printable Electronics, Centre for Process Innovation (CPI)

xxxxxxxxxx Programme is correct at time of going to press, and may be subject to change – check programme boards onsite at the show

DAY 1 – TUESDAY 12th NOVEMBER, 2013 PARALLEL OPEN CONFERENCE SESSIONS 15.00 – 16.00pm Forum 1 15.00-15.30 Aerospace

15.30-15.45

15.45-16.00

Supply Chain Readiness SC21: 21st Century Supply Chains (Hosted by ADS Group) • 15.00 Aero Engine Controls Supplier development approach to SC21 – Tim Holmes, Supplier Development Manager, Aero Engine Controls – a Rolls-Royce Company • 15.15 SME case study presentations – Phil Hart, Managing Director, MEP Ltd

Aerospace Quality Initiatives Nadcap: Into The Future Joanna Leigh, Marketing Manager, Performance Review Institute (PRI) Aerospace Enterprise Resource Planning ERP Payback Restores Pre-Recession Performance: How ERP Projects Changed the Overheads Landscape of Two Midlands Engineers Mr Steve Rollisson, Sales Executive, Sanderson ERP Software

Forum 2 15.00-15.30 Automotive

15.30-15.45

BAC Mono in Focus BAC Mono: The Engineering Journey • Neill Briggs, Project Director, Briggs Automotive Company (BAC) Ltd. • Rainer Kühlwein, Director, Briggs Automotive Company (BAC) Ltd. • Oliver Webb, Development Driver, Briggs Automotive Company (BAC) Ltd.

Automotive Technology & Innovation Development considerations for increased complexity and system authority in ADAS Ireri Ibarra, Chief Engineer – Functional Safety, MIRA Ltd

Forum 3 15.00-16.00 Composites

Emerging Technology – Nano Composites Emerging Technology – Nano Composites (Hosted by NetComposites) • 15.00: Graphene based Thermoplastic Masterbatches for Conventional and Additive Manufacturing Processes: Recent Results from the NanoMaster Project – Dr Ben Hargreaves, Senior Project Manager, NetComposites Ltd • 15.20: Nanofillers – novel materials, novel risks and what to do about them – Gordon Fern, Consultant Scientist, Institute of Occupational Medicine • 15.40: Nanosheet-reinforced polymer nanocomposites: from processing to applications – Dr Biqiong Chen, Senior Lecturer in Functional Polymers, University of Sheffield

Forum 4 15.00-15.15 Advanced Engineering

15.30-16.00

Digital Engineering Developments in machining of tooling for composites Mr Peter Dicken, Marketing Manager, Delcam

CompositesUK ‘Innovation of the year’ 2013 AWARDS Preview Session (Hosted by CompositesUK, Chaired by Dr Sue Halliwell, Operations Manager, CompositesUK) • Design – The A350XWB rear spar – GKN Aerospace • Materials – Crestabond – Achieving very fast cure times – Scott Bader • Manufacture – Crosstrack software provides complete traceability – JETCAM UK Ltd • Environmental – First fully bio-based floor plane for the Jag F-type – EcoTechnilin UK Ltd

Forum 5 15.00-15.15 Printable Electronics

15.15-15.30

15.30-15.45

15.45-16.00

Materials, Processes, Applications 3D and Micro-Printed Electronics Dr Steve Jones, Business Development Director, Printed Electronics Ltd

Printable Electronics Materials, Processes, Applications Quantum Tunnelling Composite Inks in Sensors Switches and Touch-screens David Lussey, CTO, Peratech Automotive Electronics Technology & Innovation Solutions for outstanding sensor performance Stephen Tremmel, Business Development Manager, Delo Industrial Adhesives Automotive Electronics Technology & Innovation Fretting Corrosion In Automotive Electronic Connectors: Explanation of the fretting phenomenon Causes & prevention of fretting corrosion Solutions for fretting issues Peter Wilks, Engineer Manager, Newgate Simms Ltd

Programme is correct at time of going to press, and may be subject to change – check programme boards onsite at the show

DAY 1 – TUESDAY 12th NOVEMBER, 2013 PARALLEL OPEN CONFERENCE SESSIONS 16.00 – 16.30pm Forum 1 16.00-16.15 Advanced Engineering

16.15-16.30

Skills, Training & Careers Managing Engineering Skills Resource Planning in a skills short market Philip Bowers, Business Development Manager ,Tiro Associates

Advanced Engineering Skills, Training & Careers Competency Based Interviewing for Engineering Environment Andy Raymond, Business Development Manager, Redline Group Ltd

Forum 2 16.00-16.15 Advanced Engineering

16.15-16.30

Surface Engineering Applications of Surface Engineering Stephen Plumb, Technical Development Manager, TTI Group

Automotive Low Carbon Vehicle Engineering Greener tyres: A route to low carbon vehicles Mr Paul Brown, Unit Head – Advanced Materials, Tun Abdul Razak Research Cente

Forum 3 16.00-16.15 Advanced Engineering

IP Challenges Opportunities and Challenges – Navigating the Great IP Wall of China Dr Chris Moore, Partner, Harrison Goddard Foote LLP

Forum 4 16.00-16.30 Composites

Composites 101 Composites 101 tutorial Tom Preece, Composites Business Manager, Composite Skills Alliance

Forum 5 16.00-16.15 Advanced Engineering Business

16.15-16.30

IP in the fast moving world of Motorsport Tom Sharman/Paul Loustalan, Associates at Reddie & Grose and John Linneker, Partner, Dentons

Advanced Engineering Business Realising SME global growth plans through international payments efficiency Brent Hobson, Baydon Hill FX

Programme is correct at time of going to press, and may be subject to change – check programme boards onsite at the show

DAY 2 – wednesday 13th NOVEMBER, 2013

PARALLEL OPEN CONFERENCE SESSIONS

10.00 – 11.00am Forum 1 10.00-10.15 Aerospace

10.15-10.30

10.30-10.45

10.45-11.00

Damage Detection & Prevention How to Prevent Foreign Object Damage (FOD) in Aerospace Manufacturing & MRO Vincent Marcolla, Aerospace Product Manager, Stanley Black & Decker – Facom Tools

Aerospace Measurement & Testing Sensors Technologies for Aerospace Acoustic Tests Dr Carmine Salzano, International Aerospace Defense Manager, PCB Piezotronics – USA Aerospace Programme Insight Messier-Bugatti-Dowty Supply Chain Requirements and Opportunities Pat Thomas, Head of UK Purchasing, Messier-Bugatti-Dowty, Safran group Aerospace Programme Insight Messier-Bugatti-Dowty Landing Gear Research & Technology Developments Mick White, Chief Engineer R & T, Messier-Bugatti-Dowty, Safran group

Forum 2 10.00-10.30 Automotive

Motorsport to Automotive

(Hosted by Motorsport Industry Association)

• 10.00: Taking Motorsport Technology to the Wider market, with help from the Proving Factory Mr Tobias Knichel, Commercial Manager, Flybrid Automotive Ltd

• 10.15: CFD in the Cloud for Innovation & Competitiveness Dr Nicolas A. Tonello, Director, Renuda UK

10.30-11.00

Automotive

Aluminium in Automotive (Hosted by the Aluminium Federation) Aluminium in Road Transport – The material of choice Dr Alan Arthur, Marketing & Communications Executive, ALFED & Emeka Ikwueze, BIW Materials Engineer, Jaguar Land Rover – Sustainable Aluminium Strategies

Forum 3 10.00-11.00 Composites

Emerging Technology – NDT

(Hosted by NetComposites)

Emerging Technology – Non-Destructive Testing (NDT) of Composites

• 10.00: The use of Low Cost Additive Layer Manufacturing for the Repair of Composite Sandwich Panels Dr James White, Research Assistant, University of Bristol

• 10.20: Moisture Monitor and its uses in Composite Production and Repair Paul Rogger, Technical Director, JR Technology

• 10.40: NDT applied to composite materials Richard Lee, Senior Consultant, ESR Technology

Forum 4 10.00-10.15 Composites

10.15-10.30

10.30-10.45

10.45-11.00

Materials and Process Improvement Beyone 1 the green revolution (Bio Composites) Heinz Helmut Wilhelm, Technical Service Manager Euroresins / DSM Composite Resins

Composites Materials and Process Improvement ULTRASONIC-machining of composites with double feed rates and 40 % reduced process forces Mr Markus Bäumler, Product Manager UK & IRE / Head of Technical Sales, DMG MORI SEIKI (SAUER GmbH) Composites Materials and Process Improvement Scott Bader’s Urethane Methacrylate/ Acrylic Crestapol resins for demanding pultrusion and Closed Mould applications and advances into Carbon Fibre Composites Neil Gray, Crestapol Resins Global Business Manager, Scott Bader Composites Materials and Process Improvement High productivity technologies for composites manufacturing: Cannon Estrim Martino Lamacchia, Sales Engineer, Cannon

Forum 5 10.00-10.15 Automotive Electronics

10.15-10.30

10.30-10.45

10.45-11.00

Technology & Innovation Considerations of the dual-voltage (14V/48V) supply system for the next generation passenger cars: challenges and solutions from semiconductor point of view Harald Gall, Product Manager, ams AG

Automotive Electronics Technology & Innovation Replacing wires, switches, fuses and instruments with an iPad and a wireless body control system Dr Paul Faithfull, Managing Director, Potenza Technology Ltd Automotive Electronics Technology & Innovation Serial Bus Analysis for Automotive Applications Mr John Marrinan, Applications Engineer, Tektronix UK Limited Automotive Electronics Technology & Innovation Bladesense – Improving vehicle safety and reducing costs through efficiency Mr David Chadwick, Director, OE Systems Ltd

Programme is correct at time of going to press, and may be subject to change – check programme boards onsite at the show

DAY 2 – wednesday 13th NOVEMBER, 2013

PARALLEL OPEN CONFERENCE SESSIONS

11.00am – 12.00 noon Forum 1 11.00-11.15 Aerospace

11.15-11.30

11.30-11.45

11.45-12.00

Programme Insight A350 XWB composite spar – making it possible Lee Allgood, Key Account Manager, Hexcel Composites

Aerospace / Adv Eng Additive Manufacturing Streamics™ – A trusted system for Additive Manufacturing process automation & control in the orthopaedic and aerospace industry Jan Van Espen, Senior Consultant Aerospace, Materialise Advanced Engineering REACH REACH Compliant Hexavalent Chrome Replacement for Corrosion Protection Dr Tomas Polcar, Lecturer in Coatings and Nanotribology, University of Southampton Advanced Engineering Engineering Business Are you a company? Have you claimed for R&D? Reduce your corporation tax bill or possibly get money back – Find out how!

Alan Bamford, R&D Specialist, Leicester R&D Unit, (HMRC)

Forum 2 11.00-11.30 Automotive

Advanced Metallics in Automotive

(Hosted by Niche Vehicle Network)

• 11.00: TSB MagMog Case Study / Mg Sheet Steve Montisci, European Technical Sales Manager – Wrought Products, Magnesium Elektron

• 11.15: Manufacturing the World’s Largest Titanium Structure Phil Squance, Managing Director, Caged Laser Engineering Ltd

11.30-12.00 Advanced Engineering Maintaining High Value Manufacturing Capability in the UK

(Hosted by HVM Catapult) HVM Catapult – a focus for collaboration

Dick Elsy, Chief Executive, High Value Manufacturing Catapult Forum 3 11.00-11.30 Composites

Materials & Process Innovations

(Hosted by RAPRA – Rubber And Plastics Research Association)

Composites Materials & Process Innovations

• 11.00-11.15: Technical Industrial Problem Solving and Failure Investigation Dr Stephen Jenkins, Managing Director & Surface Analysis Expert, LPD Lab Services Ltd

• 11.15-11.30: Synergistic Effect in Polymer Nanocomposites Systems Dr Emiliano Bilotti, Technical Director, Bio-Polymers, Nanoforce Technology, Queen Mary University of London

11.30-11.45

11.45-12.00

Composites Composites Best Practice B of the Bang Mr Graham Mulholland, Managing Director/Owner, epm:technology group Composites Composites Best Practice Best practice for managing and applying composites data in engineering design and materials selection Dr Will Marsden, Product Manager, Granta Design

Forum 4 11.00-12.30 Composites Next-Generation Composite Manufacturing Processes

(Hosted by EPSRC Centre for Innovative Manufacturing in Composites CIMComp)

• 11.00-11.15: Multi-scale modelling to predict defect formation during resin transfer moulding Prof Andrew Long, University of Nottingham

• 11.15-11.30: Structural joints using novel embedded inserts Andrew Mills, Leader – Composites Manufacturing Research Group, Cranfield University

• 11.30-11.45: Advanced Manufacturing of multi-functional Composites through novel fibre placement Dr Prasad Potluri, Reader in Textile Composites, University of Manchester

• 11.45-12.00: Tactile and discrete manufacturing aids for composites layup – progress towards better understanding of the layup process Prof Kevin Potter, Professor in Composites Manufacture, University of Bristol

• 12.00-12.15: Manufacturing with composites – a decision support tool Dr David Ayre, Research Fellow in Composites, Cranfield University

• 12.15-12.30: Design and manufacturing platform Dr Anna Chatzimichali, Research Associate, University of Bristol

Forum 5 11.00-11.15 Printable Electronics

11.15-11.30

11.30-11.45

11.45-12.00

Printable Electronics ‘101’ Introduction to the concepts, technologies, processes & applications in printed & organic Electronics Dan Rogers, Managing Editor, +Plastic Electronics

Applications Printable Electronics Potential for interactive printed material / Printed electronics – linking the physical with digital and online Chris Jones, Novalia Printed Electronics Materials & Processes Printable Electronics High-speed R2R manufacture of OTFTs by vacuum evaporation exploiting a flash-evaporated polymer gate dielectric Dr Hazel Assender, University Lecturer, University of Oxford

Printable Electronics Materials & Applications Graphene and its potential for organic/printed electronics Dr Monica Craciun, Senior Lecturer, Centre for Graphene Science, College of Engineering, Mathematics & Physical Sciences, University of Exeter

Programme is correct at time of going to press, and may be subject to change – check programme boards onsite at the show

22 |

The IISE is the University of Derby’s latest investment to support advanced manufacturing within the region.

It will work with industrial partners to achieve cutting edge solutions to challenges and will focus on innovation in research and development, knowledge transfer partnerships and commercialisation activity.

Areas of specialism include: – Sustainable rail transport infrastructure – Advanced manufacturing strategy and systems – Sustainable design and innovation in products and manufacturing processes – Embedded systems to optimise process reliability and performance – Control and instrumentation for products and processes.

Find out more: www.derby.ac.uk/iise2013 University of Derby HPH 1013.indd 1

09/10/2013 13:23

FORWARD C O M P O S I T E S

Forward Composites HPH 1013.indd 1

2013 | SHOWGUIDE

09/10/2013 12:39

DAY 2 – wednesday 13th NOVEMBER, 2013

PARALLEL OPEN CONFERENCE SESSIONS

12.00 noon – 13.00pm Forum 1 12.00-12.15 Aerospace

12.15-12.30

12.45-13.00

Aero Engineering & Technology Landscape Aerostructures – Breaking the Code Colin Sirett, Head of Research & Technology, Airbus in the UK

Aerospace Sector Landscape Supply Chains to underpin future growth Neil McMannus, Chair of the AGP Supply Chain Working Group Aerospace Supply Chain Opportunities Introducing your innovations, technologies and new products to Moog Aircraft Group Tim Elsey, UK Supply Chain Manager, Moog Aircraft Group

Forum 2 12.00-12.15 Automotive

12.30-12.45

12.45-13.00

Fastening Technologies Bolted Joints and Simple Traceability John Van Parys, Owner & Karl Gilby, Sales Manager, Ansomat Ltd

Automotive Digital Engineering Digital Manufacturing in the Automotive Sector Jürgen Nolde, Global Head of Automotive, Siemens Automotive Automotive Supply Chain Briefing “Just in time – Just in sequence” – JLR’s strategy for component deliveries to the new £500m Black Country based engine manufacturing centre (EMC UK) Alan Edwards, Senior Purchasing Manager, Jaguar Land Rover

Forum 3 12.00-12.30 Composites

12.30-13.00

Making the UK Composite Industry Work (Hosted by CompositesUK, Chaired by Chris Little, Chairman, CompositesUK) Composites Leadership Forum – results from the report and strategy for the CLF to take this forward Composites • Peter Chivers, Chief Executive, National Composites Centre • Alison Starr, Chair of the Composites Leadership Forum

Composites Global Composites Opportunities (Hosted by UK Trade & Investment) • Dr Faye Smith, Sector Specialist, Performance Engineering and Materials, UK Trade & Investment • David Taylor, International Trade Adviser at UK Trade & Investment

Forum 4 12.00-12.30 Composites

Next-Generation Composite Manufacturing Processes

(Hosted by EPSRC Centre for Innovative Manufacturing in Composites CIMComp)

11.00am – 12.30pm Continued

• 12.00-12.15: Manufacturing with composites – a decision support tool Dr David Ayre, Research Fellow in Composites, Cranfield University

• 12.15-12.30: Design and manufacturing platform Dr Anna Chatzimichali, Ressearch Associate, University of Bristol

12.30-12.45

Advanced Engineering Manufacturing Innovation Manufuture Lynne McGregor, Lead Technologist, High Value Manufacturing, Technology Strategy Board

Forum 5 12.00-12.30 Automotive Electronics

12.30-12.45

Global Outlook Automotive Electronics – Global Outlook and Growth Prospects Alistair Hayfield, Associate Director, Technology Solutions Group, IHS Automotive

Automotive Electronics Technology & Innovation Energy Efficient Operation of Automotive Electronics Control Units Carl Culshaw, Systems Engineer & Derek Beattie, Systems Engineer, Freescale Semiconductor UK

Programme is correct at time of going to press, and may be subject to change – check programme boards onsite at the show

DAY 2 – wednesday 13th NOVEMBER, 2013

PARALLEL OPEN CONFERENCE SESSIONS

13.00 – 14.00pm Forum 1 13.00-14.00 Aerospace

Supply Chain Readiness

(Hosted by ADS Group)

SC21: 21st Century Supply Chains

• 13.00 Update on the Industry SC21 programme and future developments Phil Curnock, Head of Supply Chain, ADS

• 13.15 NATEP Programme SME Technology funding opportunities Dave Dawson,NATEP Programme Director, ADS

• 13.30 BAE Systems Maritime supplier development programme Irshad Booly, Supply Chain Manager – BAE Systems Maritime Submarines Combat Systems

• 13.45 SME case study presentations Phil Hart, Managing Director, MEP Ltd

Forum 2 13.00-13.15 Automotive

13.15-13.30

13.30-13.45

13.45-14.00

Low Carbon Vehicle Engineering Libralato rotary engine – game changer for xEVs Dan Aris, Managing Director, Libralato Ltd

Automotive Low Carbon Vehicle Engineering MAGSPLIT2 – Next Generation Magnetic Power Split Device Mr David Latimer, Business Development Manager, Magnomatics Ltd Advanced Engineering HVM Catapult in Industry EPSRC High Value Manufacturing Catapult Fellowship Centre: bridging academia with the industry Professor Alma Hodzic, Research Director, Advanced Manufacturing Research Centre (AMRC) Advanced Engineering REACH (Hosted by EEF, the manufacturers’ organisation) How to stop REACH disrupting production Greg Roberts, HSCE Consultant (Climate and Environment), EEF the manufacturers’ organisation

Forum 3 13.00-14.00 Composites

Composites in Construction

(Hosted by the NGCC: Network Group for Composites in Construction)

• 13.00: Bridges with decks of glass fibre reinforced polymers – current status Morten Gantriis Sørensen, Product Manager, Fiberline A/S

• 13.20: Haramain Railway Station Roof Mark Hobbs, Senior Engineer, Gurit UK Ltd

• 13.40: Space-link – a feasibility study into novel applications for pultrusions Nick Maclean, Director, Ecos Maclean

Forum 4 13.00-13.15 Composites

13.15-13.30

13.30-13.45

13.45-14.00

Composites Innovation Recyclable cured epoxy systems with fibre recovery for reuse from fabricated parts Dr. Xin Li, MRSC, Head of European Operations, Adesso Advanced Materials UK Co. Ltd., and Vice President, Business Development (formerly Head of Research), Adesso Advanced Materials Wuxi Co. Ltd

Composites PulsR Microlight Aircraft – Programme Insight The design and development of the PulsR microlight aircraft featuring resin infusion Dr Bill Brooks, Technical Director & Test Pilot, P&M Aviation Ltd Advanced Engineering Regional Initiatives Black Country Enterprise Zone – an opportunity for Investment Tom Westley, Black Country Local Enterprise Partnership Board Member Advanced Engineering Regional Initiatives Black Country Bullet: Achieving Total Regional Supply Chain Fulfilment Matt Neal, Marketing Director, Rimstock Plc & Current Touring Car Champion

Forum 5 13.00-13.15 Printable Electronics

Materials & Applications

Graphene Ink for Electronics David Gibbs, Technical Sales, Haydale Ltd

Printable Electronics Materials & Processes Film Thickness Measurement of Ultra-Thin Polymer Based Films for OLED Devices Benjamin Mogg, PhD researcher at the WCPC (Welsh Centre of Printing and Coating) within the College of Engineering, Swansea University

13.15-13.30

13.30-13.45

13.45-14.00

Printable Electronics Applications UK Supply Chain Opportunity for Near Field Communication Enabled Printable Electronics Alan McClelland, Commercial Manager, Centre for Process Innovation (CPI) Printable Electronics International Standards International Standards supporting the Industrialisation of Materials and Processes Dr Alan Hodgson, Technical Development Manager, 3M UK PLC

Programme is correct at time of going to press, and may be subject to change – check programme boards onsite at the show

DAY 2 – wednesday 13th NOVEMBER, 2013

PARALLEL OPEN CONFERENCE SESSIONS

14.00 – 15.00pm Forum 1 14.45-15.00 Aerospace

Metals Processing ISF (incremental Sheet Metalforming) Roger Onions, Business Development Director, Manufacturing Resource Centre (GTMA)

Forum 2 14.00-15.00 Automotive

Test & Development Engineering

(Hosted by MIRA)

• 14.00: Non-Destructive Vehicle Rollover Testing Lee Thompson, Technical Sales Manager, MIRA Ltd

• 14.15: Accurate Testing of DLC Coatings by Nanoindentation Peter Ho, General Manager, Fischer Instrumentation (GB) Ltd

• 14.30: PMX – perfection in automation Michael Guckes, International Product & Application Manager, Hottinger Baldwin Messtechnik GmbH

• 14.45: Enhanced fatigue testing of composites Peter Bailey, Senior Applications Specialist, Instron

Forum 3 14.00-15.00 Composites

Emerging Technology – Sustainability & Recycling

(Hosted by NetComposites)

• 14.00: A Recycling and Resource Efficiency Strategy for the UK Composites Sector Joe Carruthers, Managing Director, NetComposites Ltd

• 14.20: High value nonwovens from recycled carbon fibres Mark James, Materials Specialist, Technical Fibre Products

• 14.40: Quickscan LCA methodologies Chris Hare, Technical Manager, NetComposites Ltd

Forum 4 14.00-14.15 Advanced Engineering

14.15-14.30

14.30-14.45

14.45-15.00

Regional Initiatives Developing an engineering workforce – Black Country Skills Factory Colin Parker, Director – Black Country Skills Factory

Composites Life Saving Water Craft – Project Focus Swimming with Sharks – bedroom to manufacture Ross Kemp, Founder – ASAP Water Crafts Composites Composites Innovation RFID optimisation of composites part fabrication Avner Ben-Bassat, President & CEO, Plataine Technologies Composites Composites Innovation Polycarbonate based Composite Sheets Kevin Jackson, Technical Sales Engineer, Bayer Material Science

Forum 5 14.00-14.15 Automotive Electronics

14.15-14.30

14.30-14.45

14.45-15.00

Technology & Innovation Vital signs and heart rate monitoring for occupant safety and well-being Clive Beech, Quality Team Leader, Plessey Semiconductors Ltd

Automotive Electronics Technology & Innovation New and Next Generation Transmitters & Receivers for the MOST Infotainment Network Jack Bennett, Sales Engineer, Hamamatsu Photonics UK Ltd Advanced Engineering Business Management Patent Box Tax Break for Technology Companies Hugh Dunlop, Partner, RGC Jenkins & Co Advanced Engineering Business Management Graduate Recruitment, How to attract and select the best new talent for your business Mr Stephen Brown, Managing Director, Euro-Projects Recruitment Ltd

Programme is correct at time of going to press, and may be subject to change – check programme boards onsite at the show