Skip to main content

CDB_4991

Page 1


INTRODUZCA LOS CAJONES EN LAESTRUCTURA/ PUTTHE DRAWERS INTOTHE STRUCTURE

Alto: 180 cm

Ancho: 180 cm

Fondo: 48,5 cm

INSTRUCCIONES

DE ENSAMBLE ASSEMBLY INSTRUCTIONS

Height: 70,86 in

Width: 70,86 in

Depth: 19,09 in

LOT N°

Tel - (572) 691 17 00 PBX - (572) 695 91 81 Yumbo - Valle del Cauca - Colombia www.rta.com.co

CLOSET ALLEGRO

Allego Wardrobe

RECOMENDACIONES IMPORTANTES

KEY RECOMMENDATIONS

NO pinte el mueble / Do not paint the furniture.

NO lavar las manijas o tiraderas con jabones o elementos abrasivos / Do not wash handles or dumps with soap or abrasives.

NO mojar o ubicar a la intemperie / Do not expose to rain or direct sun.

NO sobrecargue el mueble. no exceda el peso de 30 kilos para gabinetes de cocina / Do not overload the cabinet.

Weight max. 66lbs for kitchen cabinets. O O O O O O

NO golpear ni martillar el mueble (hágalo sólo donde se indique) / Do not hit or hammer the furniture (just do it where is indicated).

NO permita que los niños manipulen el mueble, puede voltearse y lastimarlos / Do not allow children to handle the cabinets or drawers, they could get hurt.

SIEMPRE levante el mueble entre dos personas, NO lo arrastre / Do not drag thefurniture Lift it between two people.

Limpie con paño seco , / Clean with a dry cloth.

HERRAJES BÁSICOS PARA MUEBLES RTA BASIC HARDWARE FOR RTA FURNITURE

1.Abrir la caja del mueble y buscar la bolsa con los herrajes / Open the box and look for the hardware bag.

P2.Abrir el paquete y comprobar que el contenido de las piezas es correcto / Open the package and verify that the content of the pieces is correct.

3. Separe los herrajes para facilitar su identificación durante el armado / Separate hardware for easy identification during assembly.

4.Arme el mueble en un lugar limpio y en una superficie plana / RTAfurniture must be assembled in a clean place and on a flat surface. S

1

2 Inserta el brazo en el pivote Ensambla las tapas para asegurar el brazo

2 3 4

En la pared, mide y marca los puntos que te indicamos abajo.

Debes perforar en los puntos con taladro y una broca de 5/16"

Inserta los chazos plásticos en las perforaciones.

Ubica el mueble y asegúralo con los tornillos.

*Medidas en cm

RECOMENDACIONES DE ENSAMBLE / ASSEMBLYRECOMENDATIONS

El buen funcionamiento del mueble depende de un adecuado ensamblaje An excellent furniture´s performance relies on a solid and a suitable assembly.

MINIFIX / CONNECTOR - DOWELS

180°

Sistemadeunióncompuestoporunperno(A)yunacajaminifix(B).

(1)Seinsertalacajaminifixdentrodelaperforaciónubicadaenlacaradelapieza,laflechadebeapuntarsiemprea ladireccióndelaperforaciónpordondeentraráelperno.

(2)Sedebeinsertarelpernoporsuparteplásticaenlasperforacionesqueseindiquen,luegoseinsertalapunta metálicaenlaperforaciónparaquesucabezaquedealinteriordelacajaminifix.

(3)Girarlacajaminifix180°paraapretarlasdospiezas.

It´safittingsystemmadeofaspreadingbolt(A)andaminifixcam(B).

(1)Inserttheminifixcamintheholeplacedinthefaceofthepanelwiththearrowpontingtowardstheholewheretheboltwill fit.

(2)Inserttheboltwithitsplasticbaseintheshownholes,theninsertthemetallicboltheadintheholessoitfitsinsidethe minifixcam.

(3)Tightthepanelsbyturningtheminifixcam180°.

TARUGOS O TAQUETES / FLUTED DOWELPIN

caja minix / dowels hole

Es un pedazo de madera corto y grueso, de aproximadamente 5 a 10 cm de largo, que sirve para amarrar el mueble y darle resistencia.

It´s ashortandthickpieceofwood,1,9to3,9inchesaproximately,whichisusedtotiethecabinetandgiveitresistence.

Tarugo/ Wooden Pin

x2

HERRAJES PARAARMADO

Riel sencillo incluye tornillos/ Drawer slides

Perno minifix/ Spreading Bolt Minifix/ Minifix Cams

x6

Tornillo de ensamble/ Drywall Screw

Bisagra interior 35mm incluye tornillos/ Interior Hinge

Tapa Minifix Adhesiva / Cover caps

Brazo neumatico x1 Declinador 80N

Alinee la parte superior de la puerta con la ranura de la pieza A Align the upper part of the door with the A panel groove 2 incluye tornillos

/ Rotate 180°

Tornillo lamina/ Sheet Metal Screw

Puntillas/ Panel pin

Deslizador/ Plastic Glide

TENER PRECAUCIÓN AL ABRIR LA BOLSA DE HERRAJES PARA NO EXTRAVIAR NINGUNO. COMPRUEBE QUE EL CONTENIDO DE LAS PIEZAS SEA EL CORRECTO. EN CASO QUE FALTE ALGUNA PIEZA O ESTE DEFECTUOSA NO DEVUELVA EL MUEBLE AL ALMACÉN, LE AGRADECEMOS LLAMAR DE INMEDIATO A LA EMPRESA TEl: 57(4) 3252280 FAX: 57(4) 3140701 MEDELLÍN - COLOMBIA, TEL: 57(2) 6959181 CALI - COLOMBIA O ESCRIBIR AL CORREO ELECTRÓNICO comercial@rta.com.co INCLUYENDO ELNUMERO DE LAREFERENCIAY ELNOMBRE DELMUEBLEYASÍ PODER RESOLVER SU PROBLEMALO MAS PRONTO POSIBLE. IMPORTANTE

HERRAJES PARAARMADO

x3

Soporte tubo ovalado/ Oval tube support

Cantonera/ Angle brackets x3

Perfil en H (1048 mm)/ Sheet metal screw x2

PASOS PARA EL OTRO CAJÓN x1

Tubo ovalado/ Chromed oval tube x4

Perfil en H (1766mm)/ Sheet metal screw x3

x2

Sistema corredizo (incluye tornillos)/ Sliding door roller kit (screws included) x1

x7

Manija/ Handle x14

Riel plástico/ Plastic Door Track

Tornillo manija/ Handle screw

Platina en “L” x4

Chazo + tornillo 2"

TENER PRECAUCIÓN AL ABRIR LA BOLSA DE HERRAJES PARA NO EXTRAVIAR NINGUNO. COMPRUEBE QUE EL CONTENIDO DE LAS PIEZAS SEA EL CORRECTO. EN CASO QUE FALTE ALGUNA PIEZA O ESTE DEFECTUOSA NO DEVUELVA EL MUEBLE AL ALMACÉN, LE AGRADECEMOS LLAMAR DE INMEDIATO A LA EMPRESA TEl: 57(4) 3252280 FAX: 57(4) 3140701 MEDELLÍN - COLOMBIA, TEL: 57(2) 6959181 CALI - COLOMBIA O ESCRIBIR AL CORREO ELECTRÓNICO comercial@rta.com.co INCLUYENDO ELNUMERO DE LAREFERENCIAY ELNOMBRE DELMUEBLEYASÍ PODER RESOLVER SU PROBLEMALO MAS PRONTO POSIBLE.

Girar 180° / Rotate 180°

Girar 180° / Rotate 180°

•Martillo

•Destornillador de Estrella *(Herramientas NO incluidas)

Girar 180° / Rotate 180°

TURN OVER

VOLTEAR/ TURN OVER

VOLTEAR/ TURN OVER

Girar 180° / Rotate 180°

SE RECOMIENDAARMAR EL MUEBLE ENTRE DOS PERSONAS

VOLTEAR/ TURN OVER

VOLTEAR/ TURN OVER

VOLTEAR/ TURN OVER

Turn static files into dynamic content formats.

Create a flipbook
CDB_4991 by Madecentro Colombia - Issuu