Liquid Fertiliser Recipes

200L Liquid Fertiliser Recipes Phosphorous Mix Add the following ingredients to a 200L barrel along with some water and mix thoroughly until dissolved in solution. Top up the barrel with water, mix again, close, and store in a cool, shaded environment: • Fulvic Acid powder - 3kg • Citric Acid powder – 2kg • MAP or MKP- 50kg Ingredients may settle over time so give the barrel a good stir before use.

The following products are compatible with and can be combined with this mix before application, at the following recommended rates: Urea - 10kg/Ha Ammonium Sulphate – 7.5kg/Ha Potassium Sulphate/Nitrate - 7.5kg/Ha Solubor - 500g/Ha Sodium Molybdate - 50g/Ha Fish Hydrolysate - 2.5L/Ha Fermented (Acidic) Kelp - 2L/Ha Application Foliar application - 20L/Ha Soil application – 50L/Ha Preferably apply in mild conditions during the early part of the day before it warms up, or towards dusk when it starts to cool down.

www.productiveecology.com.au

200L Liquid Fertiliser Recipes Nitrogen Mix Add the following ingredients, one at a time to 180L water in a 200L barrel and thoroughly mix until dissolved in solution.

• • • • • •

Fulvic acid powder - 3kg Citric Acid – 2kg Urea - 100kg Ammonium Sulphate - 25kg Solubor – 2.5kg Sodium Molybdate - 500g

Urea solutions, particularly when prepared with hard water, are best applied shortly after preparation to avoid the conversion of urea to ammonium compounds that can burn foliage.

The following products are compatible with and can be combined with this mix in the tank prior to application, at the following recommended rates: MAP/MKP - 5kg/Ha or Magnesium Sulphate – 5kg/Ha (not compatible with each other so can only add one or the other to the tank) Potassium Sulphate/Nitrate - 7.5kg/Ha Nickel Sulphate - 25g/Ha Fish Hydrolysate - 2.5L/Ha Fermented (Acidic) Kelp - 2L/Ha Application Foliar application - 20L/Ha Soil application – 50L/Ha Preferably apply in mild conditions during the early part of the day before it warms up, or towards dusk when it starts to cool down.

www.productiveecology.com.au

200L Liquid Fertiliser Recipes Calcium Nitrate Mix Add the following ingredients to a 200L barrel along with some water and mix thoroughly until dissolved in solution. Top up the barrel with water, mix again, close, and store in a cool, shaded environment: • Fulvic acid powder – 2.5kg • Calcium nitrate - 50kg • Boric acid - 2.5kg Ingredients may settle over time so give the barrel a good stir before use.

The following products are compatible with and can be combined with this mix before application, at the following rates: Urea – 10kg/Ha Fish Hydrolysate - 2.5L/Ha Fermented (Acidic) Kelp - 2L/Ha Application Foliar application - 20L/Ha Soil application – 50L/Ha Preferably apply in mild conditions during the early part of the day before it warms up, or towards dusk when it starts to cool down.

www.productiveecology.com.au

200L Liquid Fertiliser Recipes Red Legged Earth Mite Mix 1. Mix 3kg Fulvic Acid with some water in a 200L barrel.

2. If you wish to store the mix, add 2kg of Citric Acid Powder.

3. Fill the barrel with water and mix well.

4. Add Sulphate Nutrients (Mn, Fe and Co), at the rates in the table below, to the 200L barrel and mix until dissolved.

5. Close and store out of direct sunlight.

Amount 25kg 5kg 5kg 300g

Product Magnesium Sulphate Manganese Sulphate Iron Sulphate Hepta Cobalt Sulphate

% Nutrient in Product 10% 31.5% 20% 21%

Totall % of Nutrient 2.5% 1.58% 1.00% 0.03%

Prior to Application, decant required amount and add 4L/Ha Molasses, 2.5L/Ha Fish Hydrolysate, 300g/Ha Solubor, 50g/Ha Sodium Molybdate and mix well.

Add mixture to the spray tank and top up with water.

Foliar application Rate - 20L/Ha of 200L barrel mix Nutrients required in larger volumes can be added to the spray tank Apply 10-14 days apart as needed.

Note: This treatment is only effective as a foliar spray Preferably apply in mild conditions during the early part of the day before it warms up, or towards dusk when it starts to cool down.

www.productiveecology.com.au