
1 minute read
Fire alarms in House 2
Equipment functions properly,students held accountable
This is in response to the April 7 article that was written by Christine Blom. In the article, the student voiced concern over the amount of fire alarms that have been activated in Dixon House or House 2. While I agree with the author that there have been a considerable number of fire alarms, I must disagree with the assertion that the alarms are a result of the system not being “up to par.”
Advertisement
After reading Ms. Blom’s article, I reviewed the information concerning each fire alarm that has occurred this semester in House 2. By reviewing the information I have found that to date there have been 11 fire alarms in the house this semester. Of these 11 fire alarms, 10 have resulted from someone tampering with the fire safety equipment. Specifically, these alarms were set by someone activating a pull box or setting off a smoke detector. Based on this information, I can only conclude that the fire safety equipment in House 2 is functioning properly.
In the article Ms. Blom wants to know what is being done to resolve this issue. Before I address her question I must first ask: What are the students doing to resolve the issue?
I agree that there are too many fire alarms in House 2 as well as other halls throughout the campus. But the fact is that the vast majority of the alarms in the residence halls are set by residents and/or guests of the residents.
What is even more disturbing is that there are people who have knowledge of who is responsible for activating the alarms but refuse to reveal any information. By remaining quiet and not holding your peers accountable, you are telling these people that you agree with their negative behavior.
Now to answer what it is that the College does to address the issue. Our first step is to make sure that the system is functioning as it should. The fire safety equipment is tested every year to ensure that it is “up to par.” If there are any problems detected with the fire safety system during the test, those issues are corrected immediately. After testing the equipment we try to educate the