Reasons for the Linksys AC1200 RE6400 not connecting

Possible reasons for your Linksys RE6400 not connecting to the internet in short:

Incorrect Wi-Fi configuration - Double-check your setup and ensure the SSID and password match your existing Wi-Fi network.

Signal interference or weak signal - Ensure the range extender is properly placed and free from obstructions or interference-causing devices.

Firmware update - Check for and install any available firmware updates for your RE6400 range extender.

Network settings - Verify that your router allows range extenders or access points to connect.

Reset and reconfigure - Try resetting the range extender to factory defaults and set it up again.

Contact Linksys support - If the issue persists, seek assistance from Linksys customer support.

How do I connect my Linksys RE6400 Extender to the internet?

To setting up Linksys RE6400 to the internet, follow these simple instructions:

Put the range extender in the best possible spot. Plugging the range extender into a power outlet will turn it on.

Using your computer or mobile device, join the "Linksys Extender Setup" network.

Enter "192.168.1.1" into the address bar of a web browser once it is open.

Running the setup wizard requires following the on-screen instructions.

Choose your current Wi-Fi network from the list, then type the password.

If desired, change settings (like the network name and password).

After setting everything up, wait for the range extender to restart.

For extended Wi-Fi coverage, position the range extender in the best possible location.