1 minute read
Linksys RE6400 Setup: WPS Method
from Linksys AC1200 RE6400 Setup Made Easy: Simplified Instructions for Quick Installation
by kaylee Smith
Sure! In brief, here is a summary of the Linksys RE6400 setup process using the WPS method:
Put the range extender within range of your current WiFi router.
Advertisement
Plug the RE6400 into a power outlet to turn it on.
Hold down the WPS button on the RE6400 until the WPS LED begins to blink.
Within a two-minute timeframe, press the WPS button on your Wi-Fi router.
Allow time for the RE6400 to connect to the router.
Both devices' WPS LEDs should stop flashing.
Check to see if your Wi-Fi-enabled devices are connected to the extended network (SSID with " _ EXT" appended).
That's a quick rundown of the Linksys RE6400 setup via WPS.
