RGBW

LIGMAN TRAINING RGBW

1

LIGMAN RGBW

QUANTUM

MIC

GANDALF

KIOS

JET

UTAH

PATCHI

LIGHTALK

LIGMAN RGBW PROTOCOL DMX Controller DMX driver 4 outputs Address : 1-2-3-4

DMX driver 4 outputs Address : 5-6-7-8

RGBW

RGBW LED

RGBW

RGBW LED

DMX driver 3 outputs Address : 9-10-11

DMX512 is a digital protocol and is typically used for dynamic colour lighting systems. Original DMX is used for stage lighting in theatres and concerts, but it is also widely used for architectural lighting.

RGBW

RGBW LED

DMX512 is a unidirectional protocol. This means that the DMX controller only sends signals to the driver –the driver cannot send signals to the controller.

SYSTEM DEVICES

DMX Controller 3 Model ESA-U7, ESA-U9 , And Stick KE-1 1

ESA Software

IP Splitter BOX

LIGMAN RGBW

ADDRESSES • LIGMAN standard RGBW products need 4 addresses per fixture • PATCHI requires 32 addresses per fixture • ALDO requires 16 addresses per fixture

DMX CONTROLLER ESA-UE9 Feature • USB connection • 256 DMX channels (Control 64 RGBW fixtures) • stand alone mode with 20 scenes

X 64

ESA-UE7

STICK-KE1

Feature • 2 DMX512 universes in stand alone Control 256 RGBW fixtures • stand alone mode with 250 scenes 5 areas

Feature • 2 DMX512 universes in stand alone Control 256 RGBW fixtures • Up to 200 scenes manageable from the control in 5 zones • 8 touch sensitive scene buttons • micro SD memory • iPhone/iPad/Android remote and programming apps

X 128

X 128

X 128

X 128 2

WIRELESS DIAGRAM • Diagram for wireless connection between the applications and DMX controller

SPLITTER Signal splitter amplifier & IP box -For systems with more than 30 luminaries or more than 100 meters cable length.

The signal is lost. You can put a signal splitter amplifier & IP box. to amplifier the signal.

3

SMALL SYSTEM BLOCK DIAGRAM 220-240Vac

Cable + Connector male and female between DMX controller and luminaire A62791 DMX controller A60491 A60691 A60791

MAX : 30 luminaires MAX : 100m. From controller

12VDC Power supply Cable + Connector male and female between luminaires A62991

1

2

3

4

30

LARGE SYSTEM BLOCK DIAGRAM 220-240Vac

Cable + Connector male and female between DMX controller and luminaire A62791

MAX: 30 luminaires MAX: 100m. From controller 3

4

30 220-240Vac

DMX controller A60491 A60691 A60791

Splitter & IP box A62691

12VDC Power supply 6

5

4

3

2

1

6

5

4

3

2

1

MAX: 30 luminaires MAX: 100m. From splitter

MAX: 30 luminaires MAX: 100m. From splitter

4

HARDWIRING RECOMMENDATIONS • DMX is a balanced three wire system. Two wires carry the data signals and one wire acts as common reference (shield).

• Always use cable specifically designed for DMX / RS-485. These cables have an impedance of 120Ω and a low capacitance. For instance: Belden 9841 or 3105a.

• DMX must be terminated with a 120Ω resistor to prevent reflections.

• A daisy chain topology should be used.

• After 30 unit loads a splitter should be used.

DMX in + DMX in DMX in shield

DMX in + DMX in DMX in shield

DMX in + DMX in DMX in shield

120Ω

DMX Controller

OTHER RGBW CONTROL PROTOCOLS • RDM (Remote device management) is an advanced form of DMX512 allowing bi-directional communication, see here for information.

• ART-NET 4 is an advanced form of DMX. It allows for thousands of luminaires, see here for details • Pixel control allows for high speed control of single LEDs

5

LIGMAN WIRELESS RGBW LIGMAN RGBW DMX512

• LIGMAN RGBW. standard products we use five core cable for power supply and DMX data signal. For wireless control We need research and development.

DMX Controller

5 Core power line & DMX Cable

220-240 Vac

LTECH LT-870 Wireless DMX512 Transceiver transfer the standard dmx512 protocol data wireless.

One emitter matches one or multiple receivers if using the same frequency (support point to point & point to multipoint

Technical spec • Working frequency 2.4GHz ISM 64 Channels • Communication distance 350m.

• Max transmitted power 20dBm

Concept point to multi point wireless 2.4 GHz

LT-870 RX DMX Controller

DMX Cable

350 m.

LT-870 RX

LT-870 TX

DIP

The 10th is On, LT-870 works as a receiver.

2 3 4 5 6 7 8 9 10

The 10th is Off, LT-870 works as a emitter.

ON

ON

OFF

1

LT-870 RX

6

Frequency A

Concept relay point wireless LT-870 RX

DMX

Frequency B

Relay

LT-870 RX

LT-870 RX

Concept LIGMAN Wireless RGBW POWER SUPPLY 24V 200W

LT-870 24Vdc DMX

RGBW Module

Eldo power driver 180W

NTC thermistor temp control

Concept LIGMAN DMX/RDM , DALI control DMX/RDM, DALI

POWER SUPPLY 24V 200W 24Vdc

Eldo power driver 180W 7

RGBW Module

NTC thermistor temp control

“ Light

can devour the darkness but darkness cannot consume the

Light

”

Ken Poirot

8

www.ligman.com