Magnetic LED Retrofit Kits- Lighting and Power Technologies

Magnetic LED Retrofit Kit

Features ◆ DLC & cETLus listed;

Application:

◆ AC120-277V, Ra>80

• Workshop

◆ SMD2835 LED; High efficacy 130lm/w

• Factory

◆ High rebates, low import tariffs ◆ External driver ◆ Simple and secure installation, comes with quick connects for easy install

• Office • Shopping mall • supermarket

◆ An energy efficient replacement for existing T12 and T8 strip fixtures and troffers ◆ 5 years warranty ◆ Operating temperature: -20℃~45℃

CM

LED driver

1-10V Dim AC120-277V

Length

2FT 25W 4FT 36W 4FT 60W 4FT 60W

(2 strips driven by one driver) 50W (2 strips driven by one driver) (3 strips driven by one driver) (4 strips driven by one driver)

Connection Male and female connection

Magnet 1mm thickness magnet; High Impact Resistance; Rustless; Easy to install Minimized the labor costs

Parameters Efficacy

Model #

Size

Power

XSY-T8RTP25W2FT*2

2FT

25W

3250LM

XSY-T8RTP36W4FT*2

36W

4680LM

XSY-T8RTP50W4FT*2

50W

XSY-T8RTP60W4FT*3

4FT

XSY-T8RTP60W4FT*4

130LM/W

Lumen

6500LM

60W

7800LM

60W

7800LM

Ordering Guide

Driver

Multiple D riving Typ e

External

2 strips driven by one driver 2 strips driven by one driver 2 strips driven by one driver 3 strips driven by one driver 4 strips driven by one driver

Wire Input

CCT

One

4000K

end

5000K

For example: XSY-T8RTPXXWXFT*Y ZZZZ

Product name

Power

Length

Strip Qty

CCT

T8RT

PXXW

XFT

Y

ZZZZ

T8RT

25W 36W 50W 60W

2FT 4FT

2=2 strips 3=3 strips 4=4 strips

4000K 5000K

www.lightingandpowertech.com

Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com

Accessories

PC Cover

Male and Female connector

Dimension 0.69"

19.69"

43.31"

1.26"

Installation

ALWAYS TURN OFF THE POWER SUPPLY FROM MAIN CIRCUIT BREAKER FIRST!

Fig. 1

Step 1:

Fig. 2

Cut off the power of the troffer retrofit kit before any operation Pull the movable bolt at the edge

Step 2: Take out the fluorescent tubes one by one.

of the troffer retrofit kit and open the cover.

www.lightingandpowertech.com

Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com

Fig. 3

Fig. 4

Step 3:

Step 4: Dismantle the ballast and

Open the top cover of wiring box.

circuit of the fluorescent tubes .

Fig.5

Fig. 6

Step 5:

Step 6: Take out the LED driver and

A. Take out the LED Magnet Tubes

screws we provide; ďŹ x the drivers

from the package box. B. Stick the LED

onto the position of the previous

Tubes onto the troffer. Adjust its position

ballast.

to make sure they are placed horizontally in proper position.

Fig. 7

Fig. 8

Step 7:

Step 8: Connect the Connection Wire to the

Connection mode of LED Driver' s

OUTPUT terminal of the LED driver.

Input Wire(See Fig. 7): White: Live Wire Black: Null Wire Yellow/Green: Ground Wire

Fig. 9

Fig. 10

Step 10: Finish all connection between

Step 9:

LED driver and. LED strips.

Connect the Connection Wire to the LED Tubes through 2P socket one by one.

Fig. 11

Fig. 12

Step 11: Install the top cover of the wiring box to cover the LED driver.

Step 12: Pull the movable bolt at the edge of the troffer retrofit kit and close the cover slightly.

Fig. 13

Step 13: Recover the power supply and have a test. Replacement of LED Magnet Tubes is completed.

www.lightingandpowertech.com

Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com

Package Info.

Model

Carton Dimension

Qty / Carton

N.W

G.W

2FT

29.33’’*13.19’’*8.66’’

20PCS

18.5lbs

19.84lbs

4FT

56.1’’*16.14’’*7.17’’

20PCS

30.86lbs

33.07lbs

Safety Precaution To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards read all warnings and instructions included with and on the fixture box and all fixture labels.

Before installing, servicing, or performing routine maintenance upon this equipment, follow these general precautions.

Commercial installation, service and maintenance of luminaires should be performed by a qualified licensed electrician.

For The installation: If you are unsure about the installation or maintenance of the luminaires, consult a qualified licensed electrician and check your local electrical code.

To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.

Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.

WARNING: RISK OF FIRE OR ELECTRICAL SHOCK Turn off electrical power at fuse or circuit breaker box before wiring fixture to the power supply.

Turn off the power when you perform any maintenance.

Verify that supply voltage is correct by comparing it with the luminaire label information.

Make all electrical and grounded connections in accordance with the National Electrical Code and any applicable local code requirements.

All wiring connections should be capped with UL approved wire connectors.

CAUTION: RISK OF INJURY Avoid direct eye exposure to the light source while it is on.

Account for small parts and destroy packing material, as these may be hazardous to children.

SUITABLE FOR DRY LOCATION

www.lightingandpowertech.com

Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com