Argo Baseboard

COM M E RCIAL / R E S I DE NTIAL

PANEL TRIM II B A S E B OA R D

HIGH OUTPUT BASEBOARD RADIATION

DIMENSIONAL DATA

RATINGS AVERAGE HOT WATER TEMPERATURE - BTU/HR/LIN. FT MODEL

PT2 3/4" PT2 1"

GPM

4 1 4 1

120°F 130°F 140°F 150°F 160°F 308 386 470 560 650 292 366 445 530 620 297 373 454 540 630 281 352 428 510 600

WALL

170°F 180°F 190°F 200°F 750 850 940 1040 710 800 890 980 730 820 920 1010 690 780 870 960

3 3/8 (85.7) 1 3/4 (44.4) 1 1/2 (38.1)

2 1/8 (54.0)

NOTES: All the ratings noted include a 15% addition for heating effect. These ratings are based on active length, which is total length less 4 1/2". Pressure drop for element with nominal 3/4" copper tube is 0.47 inches of water per linear foot at 1.0 GPM and .525 inches at 4.0 GPM. Pressure drop for element with nominal 1" copper tube is 0.13 inches of water per linear foot at 1.0 GPM and .145 inches at 4.0 GPM. The use of ratings at 4.0 GPM (200 lbs. per hour) is limited to installations where the water flow rate through the baseboard unit is equal to or greater than 4.0 GPM. Where the water flow rate through the baseboard is not known, the rating of 1.0 GPM (500 lbs. per hour) must be used.

G.P.M.

HEAT OUTPUT FACTOR

1.0 1.5 2.0 2.5 3.0

1.000 1.016 1.028 1.038 1.045

PRES. DROP. (Millinches/Ft.) 3⁄4" ELEMENT 1" ELEMENT 47 96 157 230 320

13 26 43 63 87

9 1/8 (231.8)

2" (50.8) 4 3/4 (120.6)

3 9/16 (90.5) 1 7/8 (47.6)

1 5/8 (41.3)

1 5/8 (41.3)

FLOOR

CAT-55124-A

NOTE: DIMENSIONS IN "( )" ARE SHOWN IN MILLIMETERS.

G.P.M.

HEAT OUTPUT FACTOR

3.5 4.0 4.5 5.0 6.0

1.051 1.057 1.062 1.067 1.074

PRES. DROP. (Millinches/Ft.) 3⁄4" ELEMENT 1" ELEMENT 420 525 650 775 1060

114 145 178 216 290

ACCESSORIES

3" Solid End

4" Hinged End Cap

90° Inside Corner

90° Outside Corner

3 Piece Panel Joiner

4" Wall Trim

135° Inside Corner

14" Filler Piece Set

Bracket & Nylon Cradle

260 North Elm Street • Westfield, MA 01085 Tel: (413) 564-5975 • Fax: (413) 572-3764 www.argobaseboard.com A MESTEK COMPANY

PT-6