Easy Tips for Removing 6 Types of Stains on Block Paving Driveways There is no denying that block paving driveways look very attractive and come with the charm of vintage appearance. However, when they are stained due to any reason, you might feel disheartened. But you don’t have to feel annoyed anymore because we are going to share useful tips to remove stains from the block paving. So, keep reading and find out how to maintain the attractiveness of your driveway.
Rust Stain Removal Tips • • •
Find out the source of rust stain. Treat it to prevent further staining or re-occurrence. To remove the rust stain, first wet the affected area and apply 10% hydrochloric acid solution or similar proprietary product available from driveway repair service provider. Strictly adhere to the instructions because such products attack concrete and therefore, they might develop itch on the paving surface.
Fat Grease and Oil Stain Removal Tips • • • •
Oil easily penetrates into the pavement surface and therefore, is very hard to remove. However, if spillage is removed promptly with absorbent material, it may prevent staining. Soak up the oil spillage instead of rubbing. Otherwise, it may spread over a large area and drive the oil into the concrete. If stain still exists, scrub it with a strong detergent and wash with hot water. Some concrete may suffer loss of pigment. So, do it with caution. Use an emulsifying degreaser to remove stubborn stains. Brush it on the affected area gently and leave for the specified period of time. Finally, wash with clean water.
Paint Stain Removal Tips For Wet Paint Stain
• •
Soak the fresh paint with an absorbent material and avoid rubbing or wiping to prevent spreading. Then, treat it with suitable solvent by following the manufacturer’s instructions before washing with detergent.
For Dried Paint Stain • Scrape the paint as much as possible. • Apply the suitable paint remover. • Wash the treated area thoroughly with appropriate care.
Mortar Stain Removal Tips • •
The stains which are bonded to the surface of paving can be removed with mortar stain cleaner (stick with the manufacturer’s guidelines). If you need to remove stains from clay block paving, contact a professional service provider as its removal process varies depending on the color.
Tyre Marks and Scuffs Stain Removal Tips •
•
Tyre marks generally get removed on their own through weathering and surface wear. However, you can remove them by scrubbing with hot water and strong detergent. Don’t forget to take caution as it may lead to loss of pigment. Sometimes, the marks can be removed with power wash as well.
Leaf and Beverage Stain Removal Tips • •
You can use hot soapy water to remove the stains. In case it doesn’t work, you can use a proprietary cleaner product by following the manufacturer’s instructions.
Do you still have questions about the maintenance of block paving driveways? Consulting from a driveway installer can help you learn things in detail.