Waste Handling Equipment News West 1.13

From lawn care to Hurricane cleanup, Maryland company grows business No. 15

January 2013

Grinders rinders & SShredders hredders G Metal Detection M etal D etection Magnetic M agnetic SSeparation eparation

W

PRSRT STD US POSTAGE PAID UTICA, NY PERMIT #55

Volume 20

Page 2 • WASTE HANDLING EQUIPMENT NEWS WEST • January 2013

F rom lawn care to Hurricane cleanup, Maryland company grows business

by Larry Trojak

January 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 3

Bob Taylor (center) and two workers use the chipper's winch to pull a section of tree trunk into place for chipping.

When Hurricane Irene swept up the east coast in Tornado chipper, the firm was a welcome sight for in the Army for 20 years, and after that, I went into August 2011, it cut a wide swath of destruction, many a business and homeowner in northern corrections for another 15 years. At that point, I felt I resulting in 45 deaths and damage estimates in the Maryland. For founder and owner Bob Taylor, the needed to go in another direction career-wise and $7 billion range. While Maryland fared better than disaster, and his ability to respond to it, took his outdoor work seemed like a nice alternative. So, in 1984, I started a lawn care service.” many other mid-Atlantic and New England states, the business to a level he never anticipated. impact of this hurricane left thousands of felled trees, Change of Scenery Taylor says he started out with little more than a the result of heavy rains and tornadoes spawned by Most contractors involved in a particular field, have pickup truck and a lawnmower, focusing mostly on the storm. With every catastrophic event, however, some kind of link, even if it’s a very peripheral one, to the lawn side of things however,people started asking comes a subsequent cleanup phase. While the large that business. Not so for Bob Taylor. His desire to get if he did any work taking down and caring for trees.

“Truth be told, that’s something I’ve always wanted disaster recovery specialists tend to pick up the bulk into landscaping and tree service stems more from a of that work, smaller contractors can benefit as well. need for change. to do,” he says. “So I started looking into expanding Taylor Tree and Lawn Care is one of those smaller “I have a fairly extensive background in law my business to include tree work. I made a real effort players. Armed with a crew of three and a Morbark enforcement,” he says. “I was a military police officer to better my knowledge of the industry. I lined up a few jobs and pushed forward. I had no idea how much that would change my business.”

Equipment is Key To establish himself in the tree care market, Taylor knew he would need two things: a decent knowledge of the business and a solid, reliable brush chipper.

The first part he tackled by educating himself, eventually testing for and earning Maryland certification as a Licensed Tree Expert. The second part was a bit trickier. Because he didn’t want to overextend himself financially, renting equipment made the most sense.

So, for about the first five years, he rented brush chippers from a number of different area dealers.

“Doing that kept operating costs down,” he says.

“However, it also allowed me to see the good and the bad in every machine I rented. Eventually, I found myself coming back to the Morbark dealer more and more. It seemed I was always pleased with the job the Morbark did, and I really liked its reliability and durability. Based on that, and the fact that the jobs were coming in fairly regularly, I decided to purchase one outright.”

All About Performance In 2005, Taylor took delivery of a Morbark Tornado 15-inch brush chipper. He says it is one of the best decisions he’s made since going into business for Edward May (L) and Bob Taylor (R) use the chipper's winch to pull branches to the chipper to begin chipping TaylorTree 4 some of the branches that have been cut from the tree.

TaylorTree

from 3

Page 4 • WASTE HANDLING EQUIPMENT NEWS WEST • January 2013

himself. The unit is powered by a 140 hp Caterpillar engine and, as the chipper’s name implies, it easily processes trees up to 15-inches in diameter.

Additional features on Taylor’s chipper include a TorqMax™ dual feed wheel compression system which generates 6,600-foot-pounds of material pulling force; a reversing auto feed system to reduce wear and increase the life of the unit’s knives; and an option that has proven invaluable: a 5,000-pound capacity hydraulic winch.

“I was debating whether or not to order the chipper with the attached winch and I’m glad we did. We see it pay dividends on almost every job we do. People don’t realize how difficult it can be to get the debris to the chipper once it’s cut. Being able to hook large limbs up to winch them in, saves a lot of wear and tear on my crew and keeps things moving along.”

Good Night Irene What Hurricane Irene lacked in punch by the time she got to Maryland, she more than made up for in damage. Felled trees were seemingly everywhere; many had fallen on houses. Taylor says the impact on his business was immediate and substantial.

“I was already fairly busy before Irene hit, but after that, our business probably increased by 50-75 percent,” he says. “Three months after the event, I was still looking at a backlog of trees to cut and process.

Mind you, that was in addition to trying to do work for my existing client base. It was just unbelievable.”

“Sometimes, I had as many as ten different jobs waiting for me at one time. When that happened, we had to prioritize. We tackled the most dangerous ones first say, one in which a tree has fallen on a house, then we would go down the list. It’s tough to tell people to wait, but the customers in a situation like that really seemed to understand.”

Future Looks Bright “My business has always been built on referrals and good word of mouth,” he says. “We work hard to take care of the customer and leave the property looking like we were never there, and that’s paid off. After starting the cleanup work, word spread about the quality job we do and the phone has been ringing off the hook.”

He adds that the time after the storm was demanding on him, his crew and his equipment. His crew, Clayton Glassman, Steve Nichols and Pat Johnson, answered the call nicely, working overtime as needed.

“This kind of work can really tax the capabilities of a machine, but I have literally not had a single issue with this chipper,” he says. “I maintain it well and that, coupled with the support of a very good dealer in Elliott and Frantz, has helped us maintain the momentum we have. We’re excited for what lies ahead.”

Sissy and Edward May keep the line taut as Bob finishes cutting a limb from this tree.

Clayton Glassman cuts sections of this downed tree into manageable pieces.

Bob Taylor cuts a branch from this tree while working from his NIFTY TM50 towable man lift.

Ready response effort keeps Taylor Tree busy

by Jon M. Casey Since Hurricane Irene came ashore a little over one year ago, Bob Taylor and his crew has been busy with his regular clientele until recently when the area was hit once again by the remnants of Hurricane Sandy. In much the same way, Taylor Tree & Lawn Care, Inc. responded to the needs of the Harford County Maryland community to assist in the cleanup effort. In late November 2012, Bob Taylor commented on the cleanup efforts by him and his crew.

“We are on call for several insurance companies here in our local area,” said Bob. “When a storm like Sandy or Irene hits, we drop what we are doing and the storm damage takes priority. We were hit very hard in this area with Sandy, so we were very busy in the past several weeks.”

Taylor said that the storm damage was much like the last time with trees down on houses, trucks, sheds, horse barns, all the typical kinds of structures that are targeted by the wind blown trees as they fall. “Since Irene, we received several new customers that wanted their trees pruned to prevent future damage, so that has kept us busy along with our regular customers since Irene.

The tree that we are trimming today is one with several of its branches over a shed and a gazebo. The tree made it through Sandy but it certainly could cause damage if another storm should come through. The homeowner wanted us to prune the tree back so that it would be in better shape to withstand another storm without damaging the nearby structures.”

Taylor said that his business has grown in the past couple of years because of the word of mouth referrals that Taylor Tree gets and because of their excellent rating with the Better Business Bureau. “We have an A plus rating with the BBB and customers will often check with them to select a tree company or lawn service. Our past customers are our best reference. We like to walk the grounds with our customers when the job is done to make sure that we have provided the service that they expected. If they are not completely satisfied, we stay and finish the job to their satisfaction. That helps us to maintain our integrity as a local company who is here for them.”

“We are extremely happy with our Morbark Chipper,” he said.

“Keith Brong is here today to deliver a parts kit upgrade for our

unit. We saw a cleanout door for the discharge chute at the TCI Expo in Baltimore earlier this month, and we ordered one to install on our chipper. Keith and Jeffrey Slebzak of Elliott & Frantz, Inc. our local Morbark dealer, are dropping it off to us here today.”

Edward May, one of Bob’s two regular employees who work with him on a daily basis, said that he especially likes the Morbark Chipper because of the steady feed rate that the unit has. “Other chippers that we’ve used whip the material into the infeed at such a fast rate that they whip my backside when the branches go in,” he said. “With the Morbark, the feed rate is steadier and it doesn’t leave welts on the backs of my legs.”

Bob likes the reliability and durability of the chipper as well.

“With regular maintenance and service, this machine runs like new,” he said. “We bought this unit new, five or six years ago and it runs as well as it did the very first day. When it is time to replace this chipper, our next one will definitely be a Morbark chipper.”

For more information on Morbark Chippers and equipment, visit their website at www.morbark.com.

MARCH 6-7, 2013 Wednesday 8-4 • Thursday 8-3 • NY State Fairgrounds • Syracuse, NY Make Your Plans Now to Attend or Exhibit at The Largest Heavy Construction Equipment Show East of the Mississippi!

Krown Rust Control • 6 Kurtz Truck Equipment • A-19 Liftech Equipment Companies • A-16 Linemen’s Supply, Inc • H-27, H-28 Mabey, Inc • 58 McQuade & Bannigan • 48 Milton Cat • A-1 Modern Welding School • 87 Montage Enterprises • 75 NYLICA • 55 Perkins Power NE • 61 Progressive Commercial Insurance • 7, 8 Pump Service & Supply • 26, 27 Quality Craft Tools • 176, 177, 178, 179, 180, 181, 182, 183 R. O. Allen & Son • 17 Roy Teitsworth, Inc • 11 S&S Tractor Parts, Inc • 15 S&W Services, Inc •149 Sandri Energy, LLC • 15A Satch Sales • A-5 Sefcu • 10 Specialty Tire Inc • 21, 22 Stadium International • A-7 Steel Sales Inc • 47 Stephenson Equipment • A-10, A-11, A-12 STS Trailer & Truck Equipment • H-20 Trackman • 34, 35 Traffic Safety Products • 21, 25 Tregaskis Agency • 56 Vantage Equipment • A-15 Vellano Bros. Inc • 53, 54 White’s Farm Supply, Inc • A-5 SKID STEER RODEO SPONSORSHIPS Cazenovia Equipment Company - Platinum

FOR MORE INFORMATION CALL 1-800-218-5586 www.hardhatexpo.com

January 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 5

A-Verdi • 2, 3, 4 Admar Supply • A-2 Antwerp Machine & Repair • 5 Asphalt Zipper • 14 Atlas Fence • 32, 33 Auctions International • 20 Bath Fitter • 147 Beam Mack Sales & Service Inc • H-19 Beka Max of America Inc • 51 Blair Supply Corp • 45 Bobcat of Central New York • A-14 Carpenter Industries • 13 Cazenovia Equipment Company • A-17, A-18 Clark Equipment • 85, 86 Clinton Tractor & Imp. Co • H-23 Commonwealth Equipment Corp • 16 Concrete Raising of Upstate NY • 80 Conviber • 16 Corfu Machine Co., Inc • 78 Design Crete of America • 29, 30 EJ • 19 Emerald Equipment Systems • 42 Featherstone Supply • 50 Feher Rubbish Removal • 79 Ferguson Waterworks • 9 Five Star Equipment, Inc • 76, 77, A-23 Foland Sales, Inc • 57 HD Supply Water Works Ltd • 12 J.C. Smith, Inc • A-20, 62 J&J Equipment, LLC • A-8 Jones Specialty Services Group • 46 Kepner Equipment, Inc • 23 Keystone Precision Instruments • 100, 101 Kimbers Inc • A-13 Kraft Power Corp • H-24

TABLE OF CONTENTS ADVERTISE! February. . ADVERTISING DEADLINE: January 4 Wood Waste Recycling / Composting / Biomass Energy Pre-Show: Hard Hat Expo Pre-Show: National Demolition Association March. . ADVERTISING DEADLINE: February 1 C&D Recycling / Asphalt & Concrete Recycling Show: Hard Hat Expo, March 6-7, Syracuse, NY Show: National Demolition Association, March 23-26, San Diego, CA April. . ADVERTISING DEADLINE: March 1 Composting Equipment - Turners, Screens, Grinders, Chippers Pre-Show: Waste Expo May. . ADVERTISING DEADLINE: April 5 Screening Equipment / Crushing Equipment Show: Waste Expo, May 20-23, New Orleans, LA

From lawn care to Hurricane cleanup, Maryland company grows business . . . . . . . . . . . . . . 3-4

by Jon M. Casey

MTL Environmental takes on Sandy . . . . 10-11

by Dave Whitelaw

Komptech’s newest factory in Oelde (NRW, Germany) goes into operation . . . . . . . . . . . 15 New parts salesman joins Southeastern Equipment Company . . . . . . . . . . . . . . . . . . . 16 Shur-Co, LLC introduces new SMART2 Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 TCI Expo 2012 offers tree care industry members the latest in equipment and methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-19 Vermeer HG4000 horizontal grinder offers cost conscious features. . . . . . . . . . . . . . . . . . . . . 21

Waste Handling Equipment News West

Classifieds . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Waste Handling Equipment News is published monthly by Lee Publications P.O. Box 121, 6113 State Highway 5, Palatine Bridge, NY 13428 Standard Class Postage Paid at Palatine Bridge, NY 13428 POSTMASTER: Send address changes to: Lee Publications, P.O. Box 121, Palatine Bridge, NY 13428

Cover photo: Taylor Tree and Lawn Care Service relies on their Morbark Tornado 15 Tree Chipper to do the job. Shown left to right: Keith Brong, Morbark Equipment Specialist for Elliott & Frantz, Inc.; Bob Taylor and Taylor Tree workers, Sissy and Edward May.

Page 6 • WASTE HANDLING EQUIPMENT NEWS WEST • January 2013

Issn. 1085-7621

Publisher. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Frederick W. Lee Vice President, Production . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mark Lee Vice President & General Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bruce Button Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Jon M. Casey Editorial Assistant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Kathleen Lee Comptroller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Robert Moyer Production Coordinator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Jessica Mackay Page Composition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Michelle Gressler Shop Foreman . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Harry Delong Subscriptions/Circulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 888-596-5329 Classified Ad Manager - Peggy Patrei . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0111 MAIN OFFICE: Palatine Bridge, NY 13428 518-673-3237 - FAX: 518-673-2381 Wendell Jennings (Sales Manager) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0114 Barbara Rivera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0135 Jan Andrews . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0110 REGIONAL SALES OFFICES Kegley Baumgardner (Western VA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 540-255-9112 Scott Duffy (NH, VT, ME) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 802-484-7240 Ian Hitchener (Baltimore, Delmarva Peninsula, Southern New England) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-210-2066 Brian Johnson (Eastern New York) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0161 Wanda Luck (Carolinas). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336-416-6198 Mark Sheldon (OH, PA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 814-587-2519 Tina Krieger (National). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0108 NATIONAL TRADE SHOW SALES Ken Maring, Trade Show Manager . . . . . . . . . . . . . . . . . . . . . . 888-355-5080 or 518-673-0103 Waste Handling Equipment News will not knowingly accept or publish advertising which is fraudulent or misleading in nature.The publisher reserves the sole right to edit, revise or reject any and all advertising - with or without cause being assigned - which, in his judgment, is unwholesome or contrary to the interest of this publication. Waste Handling Equipment News assumes no financial responsibility for typographical errors in advertisements; but, if at fault, will reprint that portion of the ad in which the error appears. Publisher accepts no financial responsibility for ads which do not appear due to any circumstance.

The Editorial Deadline precedes the Ad Deadline by two days. Waste Handling Equipment News readers include owners, operators, and purchasing agents involved in construction demolition, asphalt/concrete recycling, wood waste recycling and composting. Our editorial emphasizes new equipment, site stories, association updates, legislation and industry news.

If you have news to contribute, contact: Jon M. Casey, Editor Waste Handling Equipment News 6113 State Highway 5 Palatine Bridge, New York 13428 Tel: 717-258-6775 Fax: 518-673-2699 E-Mail: jcasey@leepub.com

THE HARD HAT EXPO PRESENTS

MARCH 6-7, 2013

Wed. 10AM-7PM • Thurs. 9AM-4PM NYS Fairgrounds Syracuse, NY

SKID STEER RODEO TH WEDNESDAY, MARCH 6 SIGN UP : 10am -1pm in the Hard Hat Booth located in the Center of Progress Building

FORMAT: RODEO RUNS FROM 1pm to 3pm.

Trophy/Prize Ceremony will be held at 3 pm in the Hard Hat Booth

COMPETE E FOR R GREAT S & TROPHIES PRIZES

SEE THEM IN BOOTH A-17 & A-18

SPONSORSHIPS AVAILABLE !!

No Fee To Register • Must Be at least 18 years of age and bring proof of ID

FOR MORE INFORMATION CALL 1-800-218-5586

January 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 7

CAZENOVIA EQUIPMENT PLATINUM SPONSOR

DON’T MISS YOUR CHANCE TO ATTEND the Largest Construction Show East of The Mississippi 2 Buildings & Outside Exhibit Space • Skid Steer Rodeo

Wed. March 6th • 8 am - 4 pm Thurs. March 7th • 8 am - 3 pm

NYS FAIR GROUNDS

SYRACUSE, NY

Name Badge MUST BE WORN at all times while at the show.

Sponsored by the Trade Show Division of Lee Publications Publishers of HARD HAT NEWS, the Nor theast’s Leading Heavy Construction Equipment Trade Newspaper.

Center of Progress & Horticultural Buildings

Co. ________________________________

HARD HAT EXPO

Title _______________________________

2013 New York

Name_______________________________

27th L ANNUA

Sponsored by HARD HAT NEWS • Lee Publications

ADMISSION TICKET • ADMISSION TICKET • ADMISSION TICKET •

2013 HARD HAT EXPO

FILL OUT THE TICKET BELOW FOR FREE ADMISSION

DOOR PRIZE TICKET Name: ________________________

Registration tickets valid only if all requested information is provided below. Please Print Legibly. No-one under 18 yrs of age admitted without supervision. One Winner Per Day. Need not be present to win. Must be 18 years or older to be eligible to win.

Phone: _______________________ Deposit at the Hard Hat News Booth in The Center of Progress Building

LAST

FIRST

Please Print With Capital Letters

NAME COMPANY ADDRESS STATE

CITY TELEPHONE

AREA CODE

#

-

FAX

AREA CODE

#

-

ZIP

Page 8 • WASTE HANDLING EQUIPMENT NEWS WEST • January 2013

E-MAIL Would you Like a FREE SUBSCRIPTION to Hard Hat?

If Yes, Please Sign and Date to Receive your Free Subscription

TITLE 1 President / CEO 2 Manager / Supervisor 3 Other FULL-TIME EMPLOYEES 1 1-5 2 6 - 25 3 25+

YES

NO

Signature ______________________________________Date________

NUMBER YOUR PRIMARY BUSINESS #1, SECONDARY #2 ETC.

1 Asphalt Paving ___ 2 Concrete Paving ___ 3 Oil & Stone Paving ___ 4 Bridge Construction ___ 5 Excavating ___ 6 Utility / Underground ___ 7 Construction Demolition ___ 8 Landscaping ___ 9 Land Clearing ___ 10 Logging ___

HOW MANY OF THE FOLLOWING TYPES OF EQUIPMENT DO YOU OWN OR LEASE? 1 Excavators ___ 2 Dozers ___ 3 Track / Wheel Loaders ___ 4 Trucks ___ 5 Backhoes, TLB’s ___ 6 Other Heavy Equipment ___

In Memoriam Eriez for 27 years, most recently serving as manager of the Minerals & Materials Processing Division, where he traveled extensively worldwide in growing the company’s global equipment sales to the Mining, Coal Processing, Industrial Minerals and other related industries into Eriez’ largest served markets.

He was a respected member of several professional associations including the Canadian

Institute of Metallurgy, the International Minerals Association and the Society of Mining Engineers, where he served as National Committee chairman.

In 2004, he received Eriez’ highest honor, Person of the Year, in recognition for “managing the Mineral Processing Division to its present key position within our Worldwide Operations.” Talented, intelligent and caring, Dan truly lived the in-

scription on today’s Special Recognition plaques, You make Eriez a better place for all of us.

He is survived by his wife, Susan, and son, Nathan. Cards may be sent to The Norrgran Family, 4435 Neptune Dr., Erie, PA 16506.

Memorial contributions may be sent to a local animal shelter of one’s choice or to St. Jude’s Children’s Hospital, 501 St. Jude Place, Memphis, TN 38105.

Dan Norrgran

January 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 9

Dan Norrgran, 59, manager — Minerals & Materials Processing and Heavy Industries, passed away unexpectedly at St. Vincent Health Center in Erie on October 16, 2012.

Dan was hired in 1985 as a technical representative in the Sales Department, coming from Anaconda Minerals in Tucson, AZ, where he served as technical manager — Beneficiation Applications and supervisor of the Mineral Beneficiation Laboratory.

He was active throughout Anaconda’s mining/ milling operations — successfully reducing production costs by controlling operating expenses and increasing mineral recovery. Prior to that, he worked with the U.S. Bureau of Mines in Twin Cities, MN as a Minerals Engineer. He participated in the engineering development of high intensity magnetic separators and developed a novel process for treating silver-manganese ores with high intensity magnetics.

A native Minnesotan, he earned his BS degree in Physics from Hamline University in St. Paul, and an MS in Mineral Engineering at the University of Minnesota in Minneapolis, where the emphasis of his work was on the electrostatic and high intensity magnetic separation of paramagnetic minerals. He then earned his MBA from Penn State University. He was a prolific writer, authoring dozens of technical papers on magnetic separation advancements which were published in professional trade journals around the world.

Dan was employed at

MTL Environmental takes on Sandy

by Dave Whitelaw

Page 10 • WASTE HANDLING EQUIPMENT NEWS WEST • January 2013

Komptech Crambo 6000 helps cleanup effort With little room to spare, material on was stockpiled along the coastline where other storm damage was evident as seen in this View from Nickerson Beach Shoreline into the Parking Lot of Nickerson Beach Park.

Michael Potts, owner of MTL Environmental knew had grown up in the tree business and after graduat- horizontal grinder. As he prepared for Hurricane the storm was coming so he had gone to Long Island ing from college in 2002 he was offered a job as a Sandy’s landfall, even with all that equipment at his before Hurricane Sandy made landfall on the east stock broker. His past experience had him soon disposal, Michael could see that he would need somecoast. As part of a first response team, MTL realizing that he made more money in the tree busi- thing more to help him get the job done once Sandy Environmental had prepositioned equipment, people ness. It wasn’t long thereafter, before Michael started was gone. and supplies to await the October 29 landfall of the his own company. By responding to the damage from When the storm had passed and Michael had a storm. His company’s early preparations proved to be those two weather events, Michael was able to chance to assess the kind of debris that his people time well spent. acquire his first grapple truck and make a down would be dealing with, his first call was to Komptech Michael has more than a decade of storm cleanup payment on a second truck.

USA. Michael knew he would need a shredder that experience that dates all the way back to the Kansas Today, he owns numerous pieces of rolling stock could handle big diameter trees, root balls and other City Ice storm and Hurricane Lily in 2002. Michael including 8 grapple trucks, 7 tractor trailers and a debris contaminated brush. He knew that he needed a Crambo 6000 low speed shredder to do the job.

Potts had had previous experience with New England style storm cleanup following the big Connecticut snow storm in 2011. He knew that he would need to be able to shred large diameter wood and contaminated debris. That was necessary. So for MTL, the Crambo was the answer.

As Michael explains, while Hurricane Sandy wasn’t a monster Category 3, 4 or 5 storm, it was a long, drawn out event, with winds from 45-70 mph for several days. With the ground already saturated from earlier rainfall, the big trees on Long Island had no support. Many came down. “Had Sandy had the high winds of a larger hurricane, things would have been exponentially worse,” Michael added.

Just the same, the damage was historic. “Some of the stumps and root balls are the size of dump trucks,” he says. “Those stumps and big wood are something the Crambo can handle. Because of the Crambo’s low speed and high torque, there is less wear on the parts and it uses a lot less fuel. We’re able to run 24 hours a day because of the reduced maintenance time.”

MTL has set up a green waste yard in Hicksville, NY where they have hundreds of thousands of yards on site. There, material comes in as raw material heads back out, shredded. At 7-10,000-yards per day, Potts says there is no time for down time.

MTL, is one of the teams contracted to Looks Great Services, Inc., the company overseeing the entire cleanup effort. Looks Great Services is from nearby Huntington, NY, which is on Long Island. Michael said that Looks Great owner, Christian Agoglia, is Tree trunks go through the Crambo with as much ease as do the limbs and smaller stock.

MTL 11

MTL

from 10

contracted to cleanup Nassau County, NY and Michael enjoys helping them to get back to normal again.

The majority of the damage from Hurricane Sandy on Long Island, came from the storm surge. Water and waves pounded the coastline and with New York and New Jersey’s many rivers and Harbors, the disaster that unfolded was devastating. In many places, much of the shoreline, the buildings, the boardwalks, docks and businesses, are gone. Inland flooding left five feet of water into many homes in Long Beach, NY. As a result, crews had to establish piles of demolition debris in local Parks throughout in the County. As the cleanup continues, working to shred or reduce the material and haul it away, will take months.

Michael says storms like this will happen elsewhere in the future, and he plans for MTL to be ready and onsite as well. He says one of the reasons for his success is his relationship with his banker, Gene Columbus of Regions Bank, Memphis, TN. “We’ve built a level of trust” (with Regions Bank), that keeps the train running” he said. “When we have 70-80 trucks working at one time, “you really do” need a great relationship with your banker.”

Debris Management Plan Michael says that he has some sound advice for county and municipal governments. “The nature of nature is that it is unpredictable,” he says. “Planning is the key. A Pre-Event Contract is like an insurance policy. You don’t want to have to use it, but if you need to, it is already in place. With a Debris Management Plan in place and having sites available and able to take large amounts of material — in the hundreds of thousands of yards — makes after storm cleanup more effective. They need to have larger identified sites for the storm damaged materials and then they need to know where that material will go after it is collected.”

Future Plans When not on storm cleanups, Potts says that his core tree service businesses include residential and commercial tree work, land clearing and municipal yard debris contracts. MTL provides mulch and colored mulch and other landscape materials from their own green waste yards.

The MTL Environmental Division also provides consulting services to assist counties and cities for creating Debris Management Plans and Pre-Event Contracts. For more information on MTL Environmental at Michael’s Tree and Loader Service, call 901-301-4682 or visit their website at www.mtlmemphis.com.

Steadily, the Komptech Crambo 6000 shreds the storm damaged material into coarse mulch.

From ball caps to bed frames, the debris piles contain something from every aspect of life.

Tree stumps larger than a small car are regularly arriving at the collection site.

January 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 11

This collection site is a busy place with material coming in to Cantiague Park, from damaged areas of Nassau County.

Atop the pile of shredded material, the size of the cleanup that is underway is mind numbing. The Green Waste Site is operated by Michaels Tree and Loader Service, Memphis, TN.

Shur-Co, LLC introduces new SMART2 Transmitter Shur-Co®, LLC introduces its newest generation in SMARTrailer technology — the SMART2™ transmitter! The most advanced remote of its kind in the tarping industry, the SMART2™ can operate more than 100 different devices, including Shur-Co’s 4500 Series HD electric tarp and ProTrap® electric hopper door openers, and other soon to-be released accessories. It senses and displays all of your devices at a range of over 100-feet, relaying real time positioning, from 0-100 percent open or closed, of your trailer’s electric tarp and hopper traps. Unmatched on the market, the patent pending programmable SMART2 transmitter doesn’t just open or close your chosen application all the way. Instead, it allows you to specify the exact positioning you desire! In Express Mode operation, just press and release the button to automatically open or close your tarp or trap, stopping at the precise position set by you. This is truly “SMART touch” technology!

With safety in mind, the transmitter has a built-in emergency shut off: simply close the flip style lid and whatever operation is running stops immediately. The SMART2 has a 2-1/2-inch digital screen that’s easy to read and is back-lit for night operation. Unmatched on the market, the SMART2 runs on a rechargeable lithium battery and comes with charging cradle and

12 volt charging cable. For more details, visit www.shurco.com or call Shur-Co®, LLC at 800-474-8756 or a Shur-Co® dealer near you.

Scrap & C&D Recycling Tools

by Moley Magnetics

24V DC Battery Operated Magnet Inexpensive, easy installation and low maintenance No Generator Needed

24V Battery Operated Magnets No generator needed Runs off vehicle battery

Powerful Mobile Hydraulic Shears With or without rotation from 1 to 10 ton size

SMART2 Screen

Highest Quality Best Prices on the Market

Page 12 • WASTE HANDLING EQUIPMENT NEWS WEST • January 2013

Fixed Pulverizer

4 sizes available, reversed cylinder to protect rod, easy change teeth, cutting blade

Rotating Pulverizer

5 sizes available, reversed cylinder to protect rod, cutting blade, Oversized rotation motor

Booths 21 & 22

Self Contained Hydraulic Magnets Easy install on Multiple Machines www.MoleyMagneticsInc.com 716-434-4023 or cell 716-417-2591

USED EQUIPMENT SHOWCASE Reaching recycling and aggregate industry professionals across the United States in one easy section.

This section is dedicated to used equipment and auctions ONLY! Looking g forr a e of piece equipment? s your Here’s place e to o find d it!

Looking g to o selll used d equipment? s yourr place e to o selll it!

Here’s

Forr Moree Information n Contactt Wendelll Jennings • 518-673-0114 Lee Publications, Po Box 121, 6113 State Hwy 5 Palatine Bridge, NY 13428

January 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 13

LC Whitford Equipment Co., Inc. 4316 Bolivar Rd. Wellsville, NY 14895

FOR SALES, PARTS AND SERVICE -1-800-321-3602

Web site: www.lcwhitford.com Email: sales@lcwhitford.com Morbark

Timber Pro

Barko

Okada

2012 Rayco 1645SJRS, Kubota Turbo Diesel, 4x4, Dozer Blade - Just What You’re Looking For! Call for Pricing

2012 Timber Pro TL735-B New and Unused Ready for Work!

Call for Pricing

2012 Morbark 3800XL Track Wood Hog - Aggressive Grinder! Call for Pricing

2011 Morbark 4600XL Track, 1050-HP, Cat, 60”x46” In-Feed, Ready For Work! Call for Pricing

2009 Morbark 4600 Call for Pricing

2012 Morbark M20R Track Chippers Your Choice of Two! Zero Down for Those Who Qualify! Call for Pricing

2000 Bandit 1400 Track Chipper, 14” Capacity, 2143 Hrs, Cab & Loader Call for Pricing

2012 Rayco C100LGP, Kubota Diesel, Predator Head!

Call for Pricing

2006 John Deere 648G Series III 4x4 Skidder/Grapple - Call for Pricing

Page 14 • WASTE HANDLING EQUIPMENT NEWS WEST • January 2013

Rayco

CHIPPERS 20100 Morbark k Beeverr M12R, 110-HP Cummins, 365-Hrs, Recent Trade, Tricked Out Nice – Save $$$ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price k Tornado o 15, 140-HP Deere, Winch, 1,200-Hrs, Ready to Work! . . . . . . .

20088 Morbark . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price k 201 19988 Morbark 11D,, 110-HP Cat, 12” Capacity, Low Hours, Good Chipper! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Pricee k M15R,, Cummins 170-HP, Winch, Tricked Out Extra Nice! .Calll forr Price 20133 Morbark STUMP GRINDERS Speciall Discountss on n Alll In n Stock k Stump p Cutterss - Calll Forr Price!

20122 Rayco o 1645SJRS, Swing Out Controls! 4x4, Dozer Blade, Trailer . . . . . . Calll forr Price

20122 Raycoo 16355 Tracc Jr.,, 35-HP B&S, Sold With or Without Trailer! . . . . . .Calll forr Price MISCELLANEOUS Morbarkk “Mutt”” Forestryy Loader, Comes with Grapple & Stump Splitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price FAE,, UML/SSLL 125, Mower Attachment, Used . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price FAE,, UMM M EXX 125, Mower Attachment, Used . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price Raycoo & Rockland Log Grapples, Used . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price 20077 Ram m Rodd “Mini Skid Steers”, Gas or Diesel, Track or Wheels, Your Choice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price Ram m Rodd Attachments, Forks, Dozer/Snow blade, Palate Forks Too! . . . . .Caalll forr Price

For Sales, Parts or Service Call 1-800-321-3602 or E-Mail: sales@lcwhitford.com

Komptech’s newest factory in Oelde (NRW, Germany) recently went into operation and delivered its first machine, a Cribus 2800 trommel screen for shipment to the U.S. Komptech has factories in several locations in Europe. Its existing Oelde facility specialized in trommel screens and separation technology, and as demand for Komptech trommels continued to rise, it was obvious that a larger facility would be needed. The lease on the old plant was set to expire, so instead of renewing, the company decided that the time was right to build new from the ground up. The new factory was constructed over the course of 2012 and went into operation in early October. On October 31 the first new

trommel left the factory hall, a Cribus 2800 semitrailer. It was the first of its kind to be built anywhere, and went to a customer in the U.S. Managing director Bernd Thielepape of Komptech Germany welcomed the possibilities the new plant affords: “Our growth had simply outpaced capacity in the existing Oelde plant. Now we have room to expand, and also room to be more flexible in filling special orders.

The additional stock space also lets us pre-manufacture spares so they can be available faster.” Among other things,

the larger factory features a new pass through sandblaster and a new painting and drying station, for efficient coating and rustproofing.

The facility includes 60,000-square-foot space for welding, assembly and storage, a separate 6400-square-foot painting hall, and 10,700-square-foot office space on a six acre lot.

the larger factory features a new pass through sandblaster and a new painting and drying station, for efficient coating and rustproofing.

The facility includes 60,000-squarefoot space for welding, assembly, and storage, a separate 6400-square-foot painting hall, and 10,700-square-foot office space on a six acre lot. It employs about 120 people, and is laid out to pro-

vide 4-6 week turnaround between order entry and machine delivery. Current capacity is 120 machines per year, which can be readily increased to 200 when it becomes necessary.

With this new plant, Komptech has substantially added to its capacity in the expanding trommel market, and is well prepared to execute on its growth strategy for the coming years.

Grinder Sale

Year 2007 2006 2006 1998 (3)

Make Vermeer Vermeer Vermeer Morbark Vermeer

Model TG5000 TG7000 TG525 1200XL TG7000’s

Stu 630-986-6018 Darin 309-208-4568

2006 Vermeer TG7000

Hours 1088 1433 4290

Winter Deals

Stewart 517-206-5512

Financing Available

2006 Vermeer TG525

Price $369,000 $425,000 $180,000 $98,000 Call For Price

Location Chesterfield, MO Fishers, IN Aurora, IL Ft Wayne, IN Aurora, IL

Contact Greg Gary Stu Gary Stu

Greg 314-960-0920 Gary 317-509-3278

January 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 15

2007 Vermeer TG5000

Yokohama Tire Corporation’s Takayuki Hamaya promoted to Chief Operating Officer FULLERTON, CA — Yasushi Tanaka, president and CEO of Yokohama Tire Corporation, announced the promotion of Takayuki Hamaya to YTC chief operating officer, effective immediately. According to Tanaka, Hamaya will also retain his position as company executive vice president (EVP) and chief financial officer (CFO).

Tanaka said Hamaya will now assume executive responsibility for the following functions: Consumer, Commercial, OTR and OE sales, accounting and finance, corporate planning, supply chain and operations, as well as internal audit.

“Mr. Hamaya’s promotion corresponds with our continued efforts to improve the service we provide to our dealers while delivering the best products to the market,” said Tanaka. “I expect Mr. Hamaya to continue his strong leadership and valued contributions to YTC.”

Hamaya, who graduated from Senshu University in 1988 with a degree in Economics, and earned an MBA from Alaska Pacific University in 1992, joined The Yokohama Rubber Co., Ltd. (YTC’s parent company) later the same year. In 2004, he was named president of Yokohama Europe, and in 2005 became president of several Yokohama sales companies (in Germany, Switzerland, Austria, Denmark, Belgium, Sweden and Russia).

In 2007, Hamaya returned to Japan following an appointment as general manager, secretariat to work directly with then President of Yokohama Rubber Co., Ltd., Tadanobu Nagumo.

In 2009, Hamaya was promoted to president of Yokohama Tire Philippines (Manufacturing) and president of Yokohama Tire Sales Philippines. In 2011, he moved

to the United States and was named EVP and CFO of Fullerton, California based Yokohama Tire Corporation.

Yokohama Tire Corporation is the North American manufacturing and marketing arm of Tokyo, Japan based The Yokohama Rubber Co., Ltd., a

global manufacturing and sales company of premium tires since 1917. Servicing a network of more than 4,500 points of sale in the U.S., Yokohama Tire Corporation is a leader in technology and innovation. The company’s complete product line includes the all-new AVID

Ascend® — the first mass market tire using Yokohama’s breakthrough orange oil technology — as well as tires for high performance, light truck, passenger car, commercial truck and bus, and off the road mining and construction applications.

For more information on

Takayuki Hamaya Yokohama’s extensive product line, visit www.yokohamatire.com.

New parts salesman joins Southeastern Equipment Company CAMBRIDGE, OHIO — Southeastern Equipment Company is pleased to announce that Tony Hall is the new parts salesman at the company’s Monroe location. He is responsible for selling new, used and remanufactured parts for construction and other heavy machinery.

“We are pleased to have Tony join the Southeastern team,” says Charlie Patterson, president of Southeastern Equipment Company. “He brings over 25 years of parts and service experience to our company, and we look forward to seeing his contributions.”

Hall has been selling

heavy equipment parts since 1976. Previously, he managed his own parts company.

A graduate of Frankfurt American High School in Frankfurt, Germany, Hall resides in the West Chester, Ohio area.

Southeastern Equipment has been selling, servicing and renting heavy machinery since 1957. The company has eighteen locations throughout Ohio, Michigan, Kentucky and Indiana. Manufacturers represented by Southeastern Equipment include: Case Construction, Kobelco,

New Holland Construction, Bomag, Gradall, Kubota, Hyundai Construction, Etnyre, Vacall, Terex, Terex Roadbuilding, Champion, Schwarze, Alamo Industrial, Eager Beaver Trailers, Superior Broom, Massey Ferguson, Midland Machinery, Badger Equipment Company, DuraPatcher, Case IH, Fecon, Genie, Skytrak, JLG, Sullair and a wide variety of companies that manufacture heavy equipment attachments. For more information, visit their website at www.southeasternequip.com.

KPI-JCI and Astec Mobile Screens welcomes Oguzhan Toprak to the Astec Aggregate and Mining Group as the group’s new International Mining Sales Manager.

Page 16 • WASTE HANDLING EQUIPMENT NEWS WEST • January 2013

GrinderCrusherScreen goes to battle with Extreme Armor GrinderCrusherScreen Inc., a leader in selling used wood grinders, crushers, shredders and screening plants, has just announced the grand opening of GrinderCrusherScreen Wear Parts, a new division devoted to the sales of tips, hammers and screens for all major manufactures of wood grinders. This new expansion into the wear parts industry is a natural fit as they already sell an abundance of tub grinders and horizontal grinders throughout the United States and internationally.

According to owner, Neal Kaiserman, “our customers wanted a reputable company to purchase their wear parts from. They wanted customer service and a product that will last without costing an arm and leg. Our quality is second to none and our prices are definitely less money when comparing equal parts.”

As a part of this announcement, GrinderCrusherScreen Wear Parts is introducing a new revolutionary product called Extreme Armor ™. This special welding process allows for twice the carbide to be used and results in parts lasting 2-3 times longer than standard parts. The beautiful part of Extreme Armour is that it only costs 30 to 40 percent more than a normal tip.

Kaiserman explains “it takes time for a customer to realize that it is ok to spend 30 to 40 percent more on a part to get 2-3 times the life. In the long run it will save the customer money, not only in parts, but also in labor.” Kaiserman predicts that after one year’s time that over 50 percent of their business will be Extreme Armor parts. “After we educate our customers and they try the

part, they will see a huge difference in longevity of the parts. We will always carry the standard parts which we are confident will stand up and exceed any part sold by an OEM. When asked if there is a huge difference between wear tips, Kaiserman said “absolutely.” A known secret in the industry is that most manufacturers do not manufacture their own tips so they buy them from companies like GrinderCrusherScreen.

“I am sad to say that the majority of blanks in the industry come from the same providers from overseas and the carbide also comes from local U.S. distributors who purchase carbide from the same sources overseas. The differences in tips can be seen by the quality of weld and the amount of carbide put into each tip. Many companies cut corners and expenses by putting less carbide on the part. They do this to maximize profits.

GrinderCrusherScreen Wear Parts will differentiate themselves from the others by having consistent parts that last,” he said.

The Wear Parts division of GrinderCrusherScreen Inc. is unique in that it has a complete catalogue of parts on line at www.GrinderCrusherScreen. com/parts.htm categorized by grinder brand names and models. They offer carbide weld tips and solid carbide tips so they can supply almost any tip available on the market. Most suppliers of tips only sell a few sizes of tips.

GrinderCrusherScreen not only offers hundreds of tips but they offer them in any weld selection that the customer requires. In addition, they can take care of your screens and hammers at ex-

tremely competitive pricing. Kaiserman claims that many suppliers of wear parts do not educate their customers and that they have little idea what they are buying. He says “many customers are shopping strictly price and do not consider the fact that not all parts are equal. For instance, screens for grinders can be made out of AR400 Plate or AR500 plate but we were surprised how many customers were receiving screens made out of mild steel.

This is where buying from a reputable supplier is crucial.”

In a dismal economy, GrinderCrusherScreen has grown tremendously by sticking to their beliefs that anyone can sell a machine or part, but GrinderCrusherScreen’s success relies on providing the correct machine or part for the customer’s particular application. This differentiates GrinderCrusherScreen Inc. from its competitors. For more information, call GrinderCrusherScreen Inc. at 971344-0001 (west coast) or 770-4332670 (east coast) or on line at www.GrinderCrusherScreen.com.

The Wear Parts division of GrinderCrusherScreen Inc.

January 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 17

TCI Expo 2012 offers tree care industry members the latest in equipment and methods

Page 18 • WASTE HANDLING EQUIPMENT NEWS WEST • January 2013

by Jon M. Casey

During each day of the show, several demonstrations like this one, captured the attention of show goers. Here, instructors from North American Training Solutions (NATS) talk to attendees about “Tree Worker Trigonometry.”

Despite taking place a little more than a week after Awareness Program to Creating a Disease chippers and grinders of different kinds. It was a very history making Hurricane Sandy ravaged the Mid- Management Control Program for 2013, attendees informative session.”

For others, who were more interested in shopping Atlantic region, and only one day after an early could learn as much or as little as they desired durnor’easter just missed Baltimore to the north and ing their time at the expo. For those who arrived for new products or services, the TCI Expo hosted a east, people from the tree care industry from across early, there were even pre-conference workshops for trade show that included several interactive training sessions and equipment providers who were equally the U.S. began arriving at this year’s 2012 Tree Care professionals to attend on Wednesday November 7.

Industry Expo 2012. Beginning November 8, and “I enjoyed the presentation on the Buying Power of willing to explain the features and benefits of their running through November 10, this annual event Women and Boomers,” said Greg Ehm, of Two Rivers equipment or training services for attendees in their featured dozens of training sessions as well as a trade Marketing, Des Moines, Iowa. “Learning more about respective exhibits. show to help industry professionals learn more about those two demographics is very helpful to what we do At intervals throughout the day, Tree Demos, facilhow to do a better job in their chosen professions. as we represent Vermeer®, makers of environmental itated by North American Training Solutions, were With sessions ranging from the Electrical Hazards heavy equipment including such products as tree conducted in the center of the trade show area.

Topics such as “Rigging with Mechanical Advantage” and “The Ergonomics of Work Positioning” drew dozens of spectators during each of four daily presentations. Worker safety and health remained at the forefront of all of the presentations.

During Thursday afternoon’s events, Bellana Putz of Vermeer Corporation, hosted a brief sweepstakes winner’s ceremony where one of the ten winners of an all expenses paid hunting trip to a destination in Shamrock, Texas was presented with his prize.

Putz said that the four month promotional activity that took place from July to October, was centered around entrants applying online for a chance to win.

One winner was determined through the receipt of a special “golden ticket” that was randomly placed into one of the “Stay Sharp Kits” that had been sent out to fulfill customer orders for that item, during the contest period. Tim Mayer, a mechanic for the Mayer Tree Service of Essex, MA was one such winner.

Mayer was on hand for the celebration of his winning.

“I will be looking forward to hunting the Rio Grande Gobblers on the trip next April,” he said. “I’ve got to go home and practice my hunting skills. I haven’t been hunting in a long time.”

Next year’s TCI Expo will be held at the Charlotte, NC Expo Center on November 14-16, 2013. For more information, visit the TCIA website at www.expo.tcia.org.

Altec is one of the leading providers of products and services to the tree industry as well as to the electric, telecom and contractor markets in over 100 countries worldwide.

TCIExpo

19

TCIExpo

from 18

Visitors to the Morbark Exhibit were able to see several chipper models and how the equipment is made.

Paul Van Ocker of Modern Equipment, Patterson, NJ (facing camera in center of group) talks chippers with visitors to the Bandit Industries exhibit.

Terex Woodsman equipment like this PT-110 track steer loader, outfitted with a Loftness Carbide Cutter G3 mulching head attachment had customers inquiring about availability.

Bandit Industries featured their Sprint Cup Series Toyota as an “eye catcher” for visitors to the expo.

Mike Utterback, RAYCO sales representative (facing camera) listens to an unidentified visitor to the RAYCO equipment exhibit.

Demonstrations within exhibits like the one at Husqvarna had workers familiarizing themselves with the use of equipment like chainsaws and cutting tools.

January 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 19

Jody Parker of Rotochopper, talks with a customer during exhibit show hours.

Nifty Lift's SD64 was one of several aerial lift units on display at the TCI Expo.

Tim Mayer, mechanic for Mayer Tree Service, Essex, MA (third from left) poses for a photo after winning an expenses paid hunting trip during a recent Vermeer Equipment sales promotional sweepstakes. Shown with Mayer: Bill Weber, Arborwear, LLC, Chris Nichols, Vermeer Corporation, Ryan Vienneau, sales manager for Vermeer NorthEast, Bellana Putz, Vermeer Corp. and Steve Payne, Simonds International Corp.

FEBRUARY 6-7, 2013 Eastern States Exposition 1305 Memorial Ave • West Springfield, MA 01089

Wednesday 8am - 4pm • Thursday 8am - 3pm

DIRECTIONS FROM CONNECTICUT AND POINTS SOUTH Take I-91 North from Rte. 2, I-84, I-95 or the Merritt Parkway -Follow I-91 North to Mass. Exit 3 to Route 5 North to Rte. 147 West, Memorial Avenue approximately 3/4 mi. to ESE's Gate 9 parking lot.

ALTERNATE ROUTES FROM CONNECTICUT AND POINTS SOUTH Take I-91 North to Conn. Exit 38 (Poquonock) to Rte. 75 North to Rte. 147 East. Continue approximately 1/2 mile to ESE's Gate 9 parking lot.

Take I-91 North to Conn. Exit 40 (Bradley Int'l. Airport) to Rte. 20 West to Rte. 75 North to Rte. 147 East. Continue approximately 1/2 mile to ESE's Gate 9 parking lot.

Take I-91 North to Conn. Exit 42 to Rte. 159 North to Rte. 147 East.

Continue approximately 1/2 mile to ESE's Gate 9 parking lot.

Page 20 • WASTE HANDLING EQUIPMENT NEWS WEST • January 2013

Take I-91 North to Conn. Exit 47 West to Rte. 190 West to Rte. 159 North to Rte. 147 East. Continue approximately 1/2 mile to ESE's Gate 9 parking lot.

FROM BRADLEY INTERNATIONAL AIRPORT Take Rte. 75 North to Rte. 147 East. Continue approximately 1/2 mile to ESE's Gate 9 parking lot.

FROM SOUTHWESTERN CONNECTICUT Take Rte. 10/202 North to Southwick, Mass., turning right onto Rte. 57 East (4.7 mi.) to center of Feeding Hills. Continue straight on Springfield Street to Rte. 147 East, about 2 1/2 mi. to ESE grounds.

Continue to ESE's Gate 9 parking lot.

FROM BOSTON AND POINTS EAST Take the Massachusetts Turnpike West to Exit 6 (Springfield). Go left at the light, following I-291 South to I-91 South (right lane) to Exit 3 and follow signs. OR, take the Massachusetts Turnpike West to Exit 4, to Rte. 5 South to Rte. 147 West. Continue approximately 3/4 mi. to ESE's Gate 9 parking lot.

FROM THE BERKSHIRES AND POINTS WEST Take the Massachusetts Turnpike East to Exit 4, to Rte. 5 South, to Rte. 147 West. Continue approximately 3/4 mi. to ESE's Gate 9 parking lot.

FROM VERMONT AND POINTS NORTH Take I-91 South to Mass. Exit 13B, to Rte. 5 South, to Rte. 147 West. Continue approximately 3/4 mi. to ESE's Gate 9 public parking lot.

FROM NEW YORK CITY From New York City, take I-95 North to New Haven, Conn., travel North on I-91 and follow above directions from Connecticut and Points South. Or, follow Merritt Parkway or I-84 to I-91 North.

FROM LONG ISLAND Take the Orient Point Ferry to New London, Conn. or the Port Jefferson Ferry to Bridgeport. (See following) FROM NEW LONDON Follow I-95 South and from Bridgeport, follow I-95 North to New Haven and follow above directions from Connecticut and Points South.

GPS INFO If you are attending a show/event at Eastern States Exposition (The Big E or non-Fair), use 875 Memorial Avenue, West Springfield, Mass., as your destination address (coordinates: 42 °05'38.88"N 72 °36'42.36"W - Elev. 52') to enter Gate 9.

For Gate 1, use 1761 Memorial Avenue as your destination address (coordinates: 42 °05'29.21"N - 72°37'28.35"W - Elev. 53')

Vermeer HG4000 horizontal grinder offers cost conscious features ‘Crush boost’ among several new features PELLA, IOWA — The HG4000 horizontal grinder from Vermeer features a number of cost conscious features that will appeal to municipal waste facilities, pallet and sawmill operations and compost contractors.

A 445 hp Tier 4i (Stage

IIIB) Fiat Powertrain Technologies diesel engine powers the HG4000 and meets all U.S., Canada and European Union emission regulations through selective catalytic reduction (SCR). This power plant has shown a considerable fuel savings over similarly powered engines in this applica-

tion. To help maximize power to the HG4000 processing functions, Vermeer uses an array of electrically powered, variable speed and reversible fans for the cooling system. This not only reduces draw of engine power, but also has shown to help reduce machine sound levels.

To reduce material slippage and maintain controlled entry into the mill, the crush boost button on the remote momentarily engages increased feed roller downforce on incoming material. For certain conditions, the variable feed roller downforce can be reduced or tem-

The heart of the HG4000 is the Series II Duplex Drum, consisting of nine hammers and 18 grinder tips. porarily paused, as adjusted on the fly or set by

Equipment You Can Count On

Vermeer Is Your Total Solutions Provider Contact your dealer by calling 1-888-VERMEER, or visit the Web at www.vermeer.com VERMEER MIDWEST INC. www.vermeermidwest.com

VERMEER TEXAS-LOUISIANA www.vermeertexas.com 222 E. Frontage Rd. Alamo, TX 78516 (956) 782-5580

3025 N. State Hwy. 161 Irving, TX 75062 (972) 255-3500

4802 Baldwin Blvd.

Corpus Christi, TX 78408 (361) 887-8499

11220 Allisonville Rd. Fishers, IN 46038 (317) 842-1040

1801 179th St. North East Moline, IL 61244 (309) 751-9540

707 Access Rd. Kilgore, TX 75662 (903) 988-9868

4455 Director Dr. San Antonio, TX 78219 (210) 337-7700

1531 E. Farm Mkt. 1151 Amarillo, TX 79118 (806) 622-2407

3310 W. Coliseum Blvd.

Fort Wayne, IN 46808 (800) 649-1157

Route 24 East Eureka, IL 61530 (309) 467-3716

3415 East Slaton Rd. Lubbock, TX 79404 (806) 745-1245

21300 NW Freeway 290 Cypress (Houston), TX 77429 (218) 671-6000

8272 Rushing Rd. Denham Springs, LA 70726 (225) 665-7900

3566 Citadel Cir. Newburg, IN 47630 (812) 490-4400

16595 N I-35, Exit 347 Ross (Waco), TX 76684 (254) 829-9655

1945 Louis Henna Blvd.

Round Rock, TX 78664 (512) 244-0505

1005 Thorrez Jackson, MI 49201 (800) 336-3889

2801 Beverly Dr. Aurora, IL 60504 (630) 820-3030

1196 A. Franklin St. Marne, MI 49435 (616) 677-5900

VERMEER and VERMEER LOGO are registered trademarks of Vermeer Manufacturing Company in the US and/or other countries. © 2002 Vermeer Manufacturing Company. All Rights Reserved.

VERMEER MIDSOUTH INC. www.vermeermidsouth.com 580 Jean Mary Ave. Springdale, AR 72762 (479) 361-9110 4622 Stadium Blvd.

Jonesboro, AR 72401 (870) 931-6900 3506 S. Arkansas, Russellville, AR 72802 (479) 968-3919 1919 N. Hearne Ave., Shreveport, LA 71107 (318) 678-1575

January 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 21

The worldwide network of Vermeer dealers makes the difference - get to know your local dealer.

In the field or in the shop, nobody is more determined to see you succeed. Vermeer is an innovative leader in the manufacturing of underground and tree-care equipment. They can also be your most valued partner in your day-to-day operations.

the operator, to boost fuel efficiency and help extend component wear life.

The heart of the HG4000 is the Series II Duplex Drum, consisting of nine hammers and 18 grinder tips. This patented design decreases daily maintenance time while increasing the life of major wear components by providing the ability to reverse the grinder tips, hammers and center section of the drum. Maintenance time is decreased by the ability to remove and replace single hammers along with the ability to externally balance the drum.

A range of screen configurations are compatible with the HG4000 to help meet a wide range of end product needs. With a dual-screen system, screens can be mixed and matched for the desired product. Screens are also reversible and interchangeable to maximize wear life.

For overall operational efficiency, the HG4000 offers several design considerations to reduce material buildup around the machine; among them are flared infeed table sidewalls, a round top infeed chain, 60-inch wide feed table and single piece belly and discharge belt. The discharge conveyor, rated at 14-feet, can load a standard semi trailer, helping reduce the costs involved with auxiliary conveyors. Class leading trailer ground clearance enhances compatibility in off pavement applications.

Bolt-in wear plates are installed on the anvil surface, mill box side plates and mill lid. This enables the economical replacement of wear surfaces without torching and welding, extending the usable life of the machine and helping to lower the cost of operation.

For more information on Vermeer products and services, visit the company’s website at www.vermeer.com or e-mail Vermeer at salesinfo@vermeer.com.

To Place A Classified Ad Phone 1 (800) 836-2888 • Fax (518) 673-2381 • E-mail: classified@leepub.com

WASTE HANDLING EQUIPMENT NEWS CLASSIFIED SECTION

Page 22 • WASTE HANDLING EQUIPMENT NEWS WEST • January 2013

Waste Mailing Address - Waste Handling Equipment News Classifieds, PO Box 121, Palatine Bridge, NY 13428 Number / Classification 20 Air Compressors 25 Air Tools 55 Appraisal Services 60 Asphalt Equipment 65 Asphalt Recycling 70 Attachments 80 Auctions 85 Backhoe/Loaders 150 Buckets 165 Business Opportunities 200 Chippers 220 Compaction Equipment 225 Composting Equipment 245 Concrete Products 250 Concrete Recycling 255 Construction Demolition 265 Construction Eq. For Rent 270 Construction Eq. For Sale 275 Construction Machinery Wanted 300 Conveyors 310 Cranes 320 Crushing Equipment 365 Demolition 375 Dozers 400 Drills 415 Employment Wanted 425 Engines 430 Excavators 470 Financial Services 495 For Rent or Lease 505 Forklifts 535 Generators 550 Gradalls 555 Graders 610 Help Wanted 635 Hoists 705 Legal Notices 745 Loaders 760 Lumber & Wood Products 780 Maintenance & Repair 805 Miscellaneous 880 Parts 890 Pavers 912 Point Of Sale 925 Pressure Washers 940 Quarry Equipment 950 Real Estate For Sale 955 Real Estate Wanted 975 Rentals 1017 Scrapers 1020 Screening Equipment 1040 Services Offered 1065 Skid Steer Loaders 1085 Snowplows 1105 Sweepers 1120 Tools 1130 Tractors 1140 Trailers 1145 Training 1170 Truck Parts & Equipment 1180 Trucks 1185 Used Equipment 1205 Wanted 1230 Wood Waste Grinders 1235 Wood Waste Recycling

Announcements

Announcements

Lumber & Wood Products

Lumber & Wood Products

ADVERTISING DEADLINE FEBRUARY ISSUE

is

Friday, January 4th If you would like to place a classified ad - please call Peg at

a Thousand

1-800-836-2888

or email classified@leepub.com Announcements

Buckets

# # # # #

CLAM BUCKET, 1 yard Esco, good condition, $2,200.00.

716-937-6434

ADVERTISERS

Lumber & Wood Products

Get the best response from your advertisements by including the condition, age, price and best calling hours.

Also we always recommend insertion for at least 2 times for maximum benefits. Call Peg at 1-800-836-2888

A

Parts

TROMMEL BRUSHES

Mfg. By

CHECK YOUR AD - ADVERTISERS should check their ads. Lee Publications, Inc. shall not be liable for typographical, or errors in publication except to the extent of the cost of the first months insertion of the ad, and shall also not be liable for damages due to failure to publish an ad.

Adjustment for errors is limited to the cost of that portion of the ad wherein the error occurred.

Report any errors to 800-836-2888 or 518-673-0111 NEED BUSINESS CARDS? Full color glossy, heavy stock.

250 ($45.00); 500 ($60.00); 1,000 ($75.00). Call your sales representative or Lee Publications 800-218-5586 and ask for Beth or 518-6730101 bsnyder@leepub.com

Backhoe/Loaders CASE 580 SUPER M backhoe with grapple bucket, 2200 original hours, $28,000. 518358-2419

Books Grandpa’s Farm Has Lots Of Saws is the perfect gift for your little helper. Available at barnesandnoble.com, a m a z o n . c o m , authorhouse.com MICHIGAN Parts & Operators Manuals, plus Waukesha Engine Manuals for 75A loadwers. Rare. 315-336-3666

DUFF BRUSH LLC CONCRETE BUCKET GarBro, 1yd., L-Series, lightweight, laydown vertical discharge, 15”x22” clamshell gate, $1,400.00. 716-9376434

Powerscreen, Wildcat, McCloskey, Retech & Others

It’s easy & economical to add a picture to your ad!

1-877-863-3319

For Information Call

www.duffbrush.com

Construction Equipment For Sale 1992 FORD 555B 4WD Backhoe Extendahoe, 4700 hours, new tires, $12,500. 518-3582419

Cat D3 Dozer, $11,500; JD 450 Dozer, $8,500; Case Dozer, $6,500; Crawler Ldr., $6,500; Ford 70hp Tractor, $10,550; Ford $1,850; Case $1,850; JD 3250 Skid Steer, $3,000 up; several Excavators, $9,500 Up; Snowblowers, $400; Backhoes, $4,500; Dump Trucks, $3,000; Pickups, $1,200; Combine, $3,250.

Hundreds More Items BUY - TRADE - DICKER EVERYDAY

Recycling Equipment

Miscellaneous BUSINESS CARD MAGNETS only $75.00 for 250. Free Shipping. Call Beth at Lee Publications 518-673-0101 or bsnyder@leepub.com Please allow 7-10 business days for delivery

2000 UNIVERSAL Refriner PDR96-56, 2150 hrs., u-tube halstr uckman universal refriner. Working every day.

318-422-5794

Recycling Equipment

800-836-2888 Recycling Equipment

FOR SALE

SMILEY’S 518-634-2310 Dozers

CASE BULLDOZER 450C 1990- 6 way blade, 3450 hours excellent condition New track sprockets, new track pin and bushings, new carrier rollers and track rollers, cab brush sweepguard, cab back screens, cab side screens $18,900. 607292-3430

Parts HERCULES, CONTINENTAL WAU K E S H A : I n d u s t r i a l Engine Parts, M&M Surplus Sales, P.O. Box 381, Chester, NY 10918. 845-469-3597, Fax 845-469-0990.

1998 Morbark 1300 Tub, 8000 Hrs., 750 HP, 1000 Hrs. on Rebuilt Engine, As Is $90,000 Firm More Tubs Available

2002 Extec 830 Trommel Screen, 110 HP Deutz Diesel, 1” Screen, Good Running Condition. Price Reduced, As Is $80,000 Firm

813-421-2757

grinderguy@askthegrinderguy.com See More Grinders and Screeners @

www.askthegrinderguy.com

To Place A Classified Ad Phone 1 (800) 836-2888 • Fax (518) 673-2381 • E-mail: classified@leepub.com

WASTE HANDLING EQUIPMENT NEWS CLASSIFIED SECTION Waste Mailing Address - Waste Handling Equipment News Classifieds, PO Box 121, Palatine Bridge, NY 13428 Services Offered

Trucks

CANVAS PRINTS: All sizes.

Mounted or Unmounted. Just bring in or send us your photo at Lee Publications. Call 518673-0101 bsnyder@leepub.com

DUMP TRUCK 1990 GMC Top Kick 33,000 GVW w/air brakes, big block, 126,600 miles, 11R225 tires new, new brakes, exhaust and radiator$10,900. 607-292-3430

Wood Waste Grinders

Wood Waste Grinders

UNIVERSAL REFINER VERTICAL SHAFT GRINDERS

5 EASY WAYS TO PLACE A WASTE HANDLING EQUIPMENT NEWS CLASSIFIED AD IT IN 1. PHONE Just give Peggy a call at 3.

1-800-836-2888 IT IN 2. FAX For MasterCard, Visa, American Express or Discover customers, fill out the form below completely and fax to Peggy at (518) 673-2381

650HP - Volvo Engine 600HP - John UR 92 Grinder Deere Engine - Demo Unit UR 82 Grinder - Rental Unit Price: $430,000 Price: $290,000 E-mail: theco@theco-inc.com Phone: 1-800-776-0335

4.

5.

MAIL IT IN Fill out the attached form, calculate the cost, enclose your check/money order or credit card information and mail to: WHEN Classifieds, PO Box 121, Palatine Bridge, NY 13428

E-MAIL IT IN - E-mail your ad to classified@leepub.com ON-LINE - Go to www.wastehandling.com e a and follow the Place Classified d Ad button to place your ad 24/7!

FOR BEST RESULTS, RUN YOUR AD FOR TWO ISSUES!

Calendar of Events $15.50

WASTE HANDLING EQUIPMENT NEWS E-mail announcement of your upcoming event(s) to: jcasey@leepub.com We must receive your information, plus a contact phone number, prior to the deadline that's noted under the Announcements heading on the 1st page of these WHEN Classifieds. *** renewable energy from organics, compostable plastics, wood waste and organics recycling. Call 301-8972715.

On Internet at www.compostingcounci.org FEB 12-13 Spring Thaw Safety Training Turning Stone Resort & Casino, 5218 Patrick Rd., Verona, NY. $99. This two day educational and networking opportunity is open and available to everyone in the Mining, Safety and Construction Industries. Topics to include: dealing with regulatory groups, electrical, rigging, accident prevention, hazard awareness, lock out/tagout, first aid/CPR, mobile equipment and supervisory training workshops. Also, new this year, First Aid/CPR Certifi-cation and Defensive Driving Certification available for an additional cost.

MAR 19-21 World of Asphalt Show & Conference and AGG1 Aggregates Forum & Expo San Antonio, Texas.

On Internet at www.agg1.org/ and www.worldofasphalt .com/

$16.50

$17.00

$17.50

$18.00

$18.50

$19.00

$19.50

$20.00

DISPLAY ADS IN THE CLASSIFIEDS ARE $21.00 per column inch, $12.00 second zone. Maximum height 11 inches. No frequency or agency discounts. LINE ADS are one issue, $15.00 for 14 words, 50¢ each additional word. All rates are per insertion. Payment must be included with your order.

Name: (Print)_______________________________ Company Name:____________________________ Address:___________________________________ City:__________________St.:_____Zip:_________ Phone:_____________________________________ Cell:_______________________________________ Fax:_______________________________________ E-mail:_____________________________________ Payment Method: AmericanExpress Discover Visa MasterCard Acct#_______________________Exp. Date______ MM/YY

Signature_____________________Date_________ Required w/Credit Card Payment Only

MAR 23-26 National Demolition Assoc. 40th Anniversary Convention San Diego, CA. Call 800541-2412. On Internet at www.demolitionassociation .com

OCT 1-3 International Construction and Utility Equipment Exposition Kentucky Exposition Center, Louisville, Kentucky. More information on Internet at www.icuee.com

WANT TO PLACE A CLASSIFIED AD? CALL: 800-836-2888

January 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 23

JAN 8-10 NYLICA 2013 Annual Convention Ramada Inn, 1305 Buckley Rd., Syracuse, NY. Tours, Seminars and Training Courses. Call 315-457-8670.

JAN 15-17 The Alternative Case Resolution Initiative (ACRI) Radisson Hotel & Conference Center, Green Bay, WI. $625/person. This two and a half day seminar will teach attendees about MSHA’s Alternative Case Resolution initiative. At the completion of the course, participants will be better equipped to handle your citation case and participate in the ACRI process without legal counsel. This seminar is filling up quickly, so reserve your spot today! Contact Catamount Consulting, 518-623-2352.

On Internet at www. catamountconsultingllc.com JAN 28-31 US Composting Council: Annual Conference 2013 Orlando, Florida. The world’s largest conference and exhibition for the organics management industry - compost ing, anaerobic digestion,

$16.00

DON’T MISS YOUR CHANCE TO ATTEND!

2013 NEW ENGLAND

Name Badge MUST BE WORN at all times while at the show.

Sponsored by the Trade Show Division of Lee Publications Publishers of HARD HAT NEWS, the Northeast’s Leading Heavy Construction Equipment Trade Newspaper Registration tickets valid only if all requested information is provided below. Please Print Legibly. No-one under 18 yrs of age admitted without supervision. One Winner Per Day. Need not be present to win. Must be 18 years or older to be eligible to win.

LAST

Please Print With Capital Letters

FIRST

DOOR PRIZE TICKET Name: ___________________ Phone: __________________ Deposit at the Hard Hat News Booth in The Center of Progress Building

NAME COMPANY ADDRESS STATE

CITY TELEPHONE

AREA CODE

#

-

FAX

AREA CODE

#

-

ZIP

E-MAIL

Would you Like a FREE SUBSCRIPTION to Hard Hat? Page 24 • WASTE HANDLING EQUIPMENT NEWS WEST • January 2013

Co. ___________________________

1305 Memorial Ave • West Springfield, MA 01089

Title __________________________

EASTERN STATES EXPOSITION

Name__________________________

Wed. 8am - 4pm • Thurs. 8am - 3pm

Sponsored by HARD HAT NEWS • Lee Publications

FEBRUARY 6TH • FEBRUARY 7TH

2013 NE HARD HAT EXPO

HARD HAT EXPO

If Yes, Please Sign and Date to Receive your Free Subscription

TITLE 1 President / CEO 2 Manager / Supervisor 3 Other FULL-TIME EMPLOYEES 1 1-5 2 6 - 25 3 25+

YES

NO

Signature ______________________________________Date________ NUMBER YOUR PRIMARY BUSINESS #1, SECONDARY #2 ETC.

1 Asphalt Paving ___ 2 Concrete Paving ___ 3 Oil & Stone Paving ___ 4 Bridge Construction ___ 5 Excavating ___ 6 Utility / Underground ___ 7 Construction Demolition ___ 8 Landscaping ___ 9 Land Clearing ___ 10 Logging ___

HOW MANY OF THE FOLLOWING TYPES OF EQUIPMENT DO YOU OWN OR LEASE? 1 2 3 4 5 6

Excavators ___ Dozers ___ Track / Wheel Loaders ___ Trucks ___ Backhoes, TLB’s ___ Other Heavy Equipment ___

Questions? Call 800-218-5586

New England

West Springfield, MA

FEBRUARY 6-7, 2013 ATES EXPOSITION EASTERN ST STATES 1305 Memor ve ial A Memorial Ave W ingfield, MA 01089 est Spr West Springfield,

W ednesday 8am - 4pm Wednesday Thursday 8am - 3pm

For Information on Exhibiting or Attending CallKen Maring

1-800-218-5586 www.leetradeshows.com

New England Hard Hat Expo is Produced by the Trade Show Division of Lee Newspapers, Inc. Publishers of Hard Hat News, Waste Handling Equipment News, North American Quarry News P.O. Box 121, 6113 St Hwy. 5, Palatine Bridge, NY 13428 • 800-218-5586 • Fax 518-673-3245

January 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 25

DON’T MISS IT

HARD D HAT T EXPO MARCH 6-7

2013

NEW YORK STATE FAIRGROUNDS SYRACUSE, NY

Page 26 • WASTE HANDLING EQUIPMENT NEWS WEST • January 2013

WEDNESDAY 8-4 • THURSDAY 8-3

Show Manager: Ken Maring 1-800-218-5586 or 518-673-0103 • Fax 518-673-3245 Visit Our Website: www.leepub.com

th

27

Consecutive Year Hard Hat Expo is Produced by the Trade Show Division of Lee Newspapers, Inc., Publishers of Hard Hat News P.O. Box 121, 6113 St Hwy. 5, Palatine Bridge, NY 13428

FOR MORE INFORMATION CALL 1-800-218-5586

LANDFILL

TRANSFER STATION

Reduce Volume and Increase Density

DEMOLITION WOOD SCRAP YARD CONTRACTOR PROCESSING

Lower Up Front Investment Lower Maintenance Costs than Hammer Mills

Minimal Maintenance Requirements

Please contact us today to learn how we can help you make more $$$

631-218-2600 info@hammelny.com www.hammelny.com

January 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 27

A HAMMEL Shredder can be operated for far less than any other shredder! (incl. all wear parts, fuel, and fluids)

Page 28 • WASTE HANDLING EQUIPMENT NEWS WEST • January 2013