Page 1

September 2011

Since 1986 - The Original (800) 315-9950 or (615) 349-1890

Loggers • Sawmills • Pallet Manufacturers • Wood Recycling Equipment

DealS of the Month 2006 JD 848G Skidder

The mill for massive logs. Compare this to others! Item ID: 12327 Contact: Tom Ph: 800-315-9950 x604

2006 John Deere 648GIII

Item ID: 12329 Contact: Daren/Michelle Ph: 800-315-9950 x603

1992 John Deere 643 Feller Buncher

WM1000 saws 67" logs

“We recently cut a 15’, 48” diameter walnut log [using the WM1000] and were amazed to find that the thickness of the slabs didn’t vary by more than 1/32” over the whole 15’. Our finish on the slabs is much better than [our previous mill] and we yield an extra slab on every log. We also plan to use the WM1000 for a large re-saw and for parting out logs to be cut on our smaller sawmill.” — Art Blumenkron Goby Walnut and Western Hardwoods, Portland, OR

The Wood-Mizer WM1000 is designed to saw large logs including hardwood, softwood, and tropical species. Durable and easy to use, this mill features a saw head with a massive throat opening that moves along a twin-rail frame. The WM1000 breaks down large logs with a capacity center cut of 67" and uses thin-kerf narrow band blades that measure 2" to 3" wide and provide more material recovery. Visit woodmizer.com or call 800.553.0182 for more information.

Price Reduced! Item ID: 12285 Contact: Chris Woods Ph: 800-315-9950 x600

See Photos online at— www.LBXonline.com

Watch the WM1000 in action at woodmizer.com or by scanning this code on your smartphone.

800.553.0182

WoodmizerIndustrial.com



PALLET STOCK, STUDS, I-JOISTS, STRUCTURAL COMPONENTS THE L-M SAWS, WILL TAKE YOU TO THE NEXT LEVEL! Leading the industry in bundle cross cut systems since 1957! New Design! New Technology!

Portable Yard Saw

Model 200MP-7-SS Gas Model 100MP-7-SS Electric 3 inch side shift, a standard feature

Traveling Arch Saw

Hydraulically controlled No manual cutting Our most popular turn key system

The New L-M “I-CUT” Bundle cross cut system!

* 60’ long frame to precision cut your I-Joists * Precision accuracy of +- 1/32” * Shorter system are available to process all your cutting needs * Tremendous labor savings, Guaranteed!

L-M Deck Cut Off Saw 3 foot to 12 foot bar lengths Hydraulically controlled

Automatic Strapping System Attach bottom crossers Side squeeze incorporated Polyester strap

Flush End Bump Rollcase

Reduce or eliminate your end trims

The Verticut P4 System now offers scan and cut technology, reducing operator error by using a bar code system!

Visit our web site www.LMSaws.com to see our complete product line and videos!

L-M Equipment Co. Ltd

Phone: 604-431-8800 Toll Free: 1-800-455-8807 Web Site: www.LMSaws.com E-Mail: Sales@LMSaws.com


Hahn HFP160

Firewood Pro

Timber Harvesting Equipment

Hahn Machinery Inc, P.O. Box 220 • Two Harbors, MN 55616 www.hahnmachinery.com

T

urn your loader into a self-propelled firewood processor capable of picking logs out of the pile and cutting and splitting them onto the ground or conveyor or into a trailer, truck or bin. Operated by one person seated in the comfort and safety of the loader’s cab, the HFP160 is designed for commercial firewood operations and, when compared to traditional mechanical firewood processing methods can: • • • • • • • •

Reduce manpower requirements Reduce work comp costs Reduces fuel consumption Improve safety Provide greater mobility Dramatically reduce set up time Reduce handling of the wood Lower your cost per cord for an improved bottom line

The standard HFP160 is equipped with a 4-way splitter head with hydraulic height adjustment and 16” and 20” cut lengths. Optional interchangable 6-way and 8-way splitter heads and longer cut lengths are available. For the past 37 years, Hahn Machinery has been noted for offering simple, rugged, and productive forestry equipment and the HFP160 is no exception

Call Today

1-800-483-8825 for complete details and a free DVD or email info@hahnmachinery.com Covered by US Patent #7,669,618


The

Original

Lumberman’s Exchange Your #1 Source for Forest Industry Products! The Lumberman’s Exchange is published monthly and is circulated internationally to sawmills, loggers, pallet makers, recyclers and industrial woodworking plants. Publisher Woods Publishing Advertising Sales Morris Woods (615) 349-1890 morris@LBXonline.com

** Auctions **

Maynard’s Auction — Page 10 Auction #1 - Atikokan Forest Products Tues. & Wed. • Sept. 27 & 28 • 9:00 a.m.

Sapawe, Ontario, Canada

Auction #2 - Northern Wood Sawmills Thurs. & Fri. • Sept. 29 & 30 • 9:00 a.m.

Thunder Bay, Ontario, Canada

Charleston Auction — Page 11 Huge 2-Day Onsite Auction Wed. & Thurs. • Sept. 28 & 29 • 1:00 p.m.

Accepting Consignments!

Online Auction: Building Systems Mfg. Begins: Tues., Oct. 4 at 10:00 a.m. Ends: Thurs., Oct. 6 at 12 noon

www.CharlestonAuctions.com

** Calendar **

Design Director Heninger & Associates lbxonline@comcast.net Equipment Reps Equipment Representative Daren Bodine (800) 315-9950 x603 Equipment Representative Tom Hirt (800) 315-9950 x604 Mailing Address P.O. Box 1916 Columbia, TN 38402-1916 (615) 349-1890 Phone (931) 233-0802 Fax Ad Submissions May be sent to— LBXonline@comcast.net Postmaster Send address changes to: Lumberman’s Exchange P.O. Box 1916 Columbia, TN 38402 The Original Lumberman’s Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers the Lumberman’s Exchange, its principles and associates are not held liable for errors or omissions. Reproduction in whole or part prohibited with-out written consent. ©2011 by Woods Publishing.

   2011 Kentucky Wood EXPO September 16 & 17, 2011 Coming Sept. 16–19, 2011 London, Kentucky London, KY

 Featuring the Latest Technology & Services for: Sawmill, Pallet, Logging, & Secondary Equipment, Loaders, Chain saws, Trucks, Parts, Safety Clothing, Accessories, New & Used Equipment, and Much More!

Midwest Forest Show Coming Sept. 30–Oct. 1 Cape Girardeau, Missouri

Free Drawings for Door Prizes—Family Friendly—Educational Exhibits Tickets- Adults $3 ($5 at gate); Kids- $2 under six is free—Free Parking Events: Live Demonstrations of Machinery & Equipment– Inside & Outside Exhibits Lumberjack Contests Chain Saw Carving Skidder & Knuckleboom Contests Continuing Education for Loggers Live Bluegrass & Country Music and much more.

The Paul Bunyan Show Coming Oct. 7–9, 2011 For More Information On Exhibiting or Attending: Cambridge, Ohio Kentucky Forest Industries Association 106 Progress Drive Frankfort, KY 40601 Tel: 502/695-3979 Fax: 502/695-8343

** INFO LINK ** www.kfia.org

Amark........................................7 AWMV......................................1 B & B Mfg...............................37 B. H. Payne..............................13 Baker....................................6, 15 Bartlett Saw Service.................27 Bay Equipment.........................29 Ben Jones Equipment.........19, 23 Blockbuster..............................33 Brewer Eagle............................26 Buck Equipment (AIM) ..........14 Cardinal Wireless.....................21 Charleston Auctions.................11 Concept Products.....................24 Cord Master.............................22 Corley Mfg...............................33 CRD Metalworks.....................17 Dyna Products..........................18 Kentucky Wood EXPO..........38 Lignomat..................................19 Litco.........................................13 LM Equipment, Canada.............3 M&F Gauge.............................14 11 PBS Ad 4.125x10.875.indd 1

Machinery Sales Co., Inc...........8 Maynard’s Auctions...............10 Menominee Saw.......................35 Metal Detectors, Inc.................31 Midwest Forest Show.............39 Midwest Sharpening Service...28 Multitek....................................12 Paul Bunyan Show.................39 Phase-A-Matic.........................27 Piper’s Saw Shop.....................30 Resource Recovery..................21 Rotochopper.............................40 Row Electric.............................34 Sawmill Exchange...................31 Select Sawmill.........................32 Sering Sawmill.........................25 Sharp Tool Co..........................16 Suffolk Machinery.....................2 US Blades................................36 Weaver Electric........................25 Woodmizer...........................9, 19 X-S Iron.....................................9

6/23/11 8:09 AM

For Classifieds Call Your LBX REP at 1-800-315-9950

For Classifieds Call 800.315.9950 See pictures, prices, and Location of all equipment at www.LBXonline.com

BLOWERS

Phelps blower with 20 HP motor - Item ID-11742 - Daren 800-315-9950 x603

CHIPPERS

CM&E 36” chipper. Bottom discharge - 75 HP - Item ID11751 - Daren 800-315-9950 x603 2000 BANDIT 150XP -Cummins 3.9L diesel 12 IN. capacity Item ID-11790 - Daren 800-3159950 x603 2008 Dynamic 585 Chipper - Factory Rebuilt with upgraded components including new discharge chute, new larger bearings, new larger feed pins, new access panels to chip chamber wear plates. JD 500 HP engine with 2200 hours. Limited factory warranty on upgraded features. - Item ID12059 - Tom 800-315-9950 or 615-349-1890 x604 Precision 48” 3-knife chip pac, 5x5 screener, with a brand new Y valve, 100 hp electric motor on the chipper, 15 hp motor on the blower, and a 3hp motor on the shaker. This machine is in very good condition and is ready to work. Price : 24,000 USD - Item ID-12128 - Daren 800-315-9950 x603 Fulghum 54” 8-knife chipper - Horizontal feed. Vertical discharge. No motor. No pulley on machine but a bushing is present. - Item ID11737 - Daren 800-315-9950 x603 HMC 48” Chipper - HMC 48”side entry, top discharge chipper. It hs a model CM 48. Serial 23-111. It has a 75 HP 208-230/460 totally enclosed motor and is a very clean looking machine - Item ID11750 - Daren 800-315-9950 x603 Precision 58” Chip Pack - Complete refurbished Precision 58” Chip Pack. This machine is been completely refurbished and is ready to work. - Item ID-12233 - Daren

The Original Lumberman’s Exchange n 5


Zip

❑ Please Remove

DealS of Month From

State

❑ Please Change

1995 Hanover D3 Forwarder

st The Mo Band r Popula in the Resaw ld! Wor info@bakerproducts.net Call: (800) 548-6914 www.logtolumber.com

City

Your Log To Lumber Leader

Item ID: 12162 Contact: Tom Ph: 800-315-9950 x604

Phone

September 2011

P.O. Box 1916 Columbia, TN 38402

*Company name and address required to process your change.

Address

Individual Name

The Original Lumberman’s Exchange

Company Name*

608F Feller Buncher

If you need to Change your Address or Add Your Name to our mailing list, then please complete this form and mail to:

❑ Please Add

One of the All-Time Greats!

–August–

1997 Timberjack

6 n

The Model “A” Baker Band Resaw:

Equipment Representatives Call us today for all your used equipment needs!

free equipment listings! Call – (800) 315-9950

Item ID: 12223 Contact: Daren/Michelle Ph: 800-315-9950 x603

‘92 John Deere 643 Feller Buncher

Item ID: 12285 Contact: Chris Woods Ph: 800-315-9950 x600

For classifieds call (800) 315-9950 or (615) 349-1890 www.LBXonline.com

CHOP SAWS

Block saw - This well-guarded block saw has a 4x6 capacity. Blocks drop into a small elevator. It has a motor on the elevator and one on the saw. Motor controls are present. Air is hooked up to actuate the saw stroke. Feed is manual. Block length is adjustable READY TO GO!! Price : 4,500 USD - Item ID11838 - Daren 800-315-9950 x603

COMPLETE SAWMILLS

Daren Bodine Phone: 800-315-9950 Ext. 603

See Photos online at—

800-315-9950 x603 Complete rebuilt Precision 58” Chipper with Factory Warranty. - Item ID-12232 Daren 800-315-9950 x603 Trelan DL18 Whole Tree Chipper - Powered by a 475-hp Cat 3406 diesel engine. Has a knuckleboom loader. Will chip up to an 18” diameter log. Is pulled with a semi tractor. Cab has sound protection and heat. Rebuilt from the ground up, new wheel bearings, new face plate for chipper wheel, changed Detroit engine to Cat engine went from 300-hp to 425-hp, added new belts and heavier bearings. Only run about 6 months after rebuild. Can be used to make fuelwood. Is ready to go, needs no work. Was manufactured in the mid 80’s. extra knives that come with it - Item ID-11292 Daren 800-315-9950 x603

Tom Hirt Phone: 800-315-9950 Ext. 604

2005 Timberharvester Sawmill - Purchased new in December 2005, has 1550 hours, powered by a 47hp Lombardini diesel, log debarker, computer setworks, can cut up to a 36”x21’ log. Stored and run inside. - Item ID-11584 - Daren 800-315-9950 x603 Frick Automatic Sawmill - 3 Head Block, Tyrone Berry Feed, 250 H.P. Cummins Power Unit, 4 Strand Live Deck With Stop And Load, Chain Type Log Turner, Frick Edger, Live Rollers, 30 Ft. Live Belt, 18 Ft. Green Chain. Ready To Work! - Item ID12217 - Tom 800-315-9950 or 615-349-1890 x604 Meadows #2 Sawmill -

Visit us online at www.LBXonline.com!


Meadows #2 carriage - 15’ OAL with 4 headblocks - 3 hydraulic dogs - 5 axles, hydraulic setworks with pantograph arm assembly to carry hydraulic & electric lines from carriage to husk - clock face lumber dial controls for setworks & dogs. Meadows #2 track frame, with idler assembly. Reckart hydraulic feed package with 40-hp electric motor. Mellott log turner. 35’ log deck with stop & load. 130KW generator. - Item ID-11086 - Daren 800315-9950 x603 Sawmill With Chipper Carthage carriage, helle sawmill and chipper - Item ID-11992 - Daren 800-315-9950 x603

DEBARKERS

HMC V206 Debarker - HMC V206 Debarker, Waste conveyor, Cab, 30 hp head Price: - Item ID-12228 - Daren 800-315-9950 x603

EDGERS & GANGS

Meadows 7” X 48” Combination edger - Serial # T7-1738-99. Was once used

Below Wholesale

‘06 JD 2554 Harvester w/

Waratah 624 Processing Head Item ID: 12087 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

with a shifting saw. Some, but not all of the parts for this are present. There are three 23” split strob saws. There is an integrel hydraulic system on this machine. 8’ outfeed. 10’ infeed with hydraulic roller holdover and two air popup pushover chains. Remote operator station. Hydraulic

2003 Timbco T445-D w/Quadco 2800 Sawhead; one owner. Runs great! Item ID: 12320 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

press roll lifter. Main shaft is 2-15/16”. There is no main motor present. There is a mast for shifting lasers but the system is not complete. Footprint of unit: 7’ X 22’ Item ID-11733 - Daren 800-3159950 x603 Ogam chain drive open arm gangsaw. - 2 Main drive motors included. 10 HP and

2002 JD 648G III Grapple Skidder Item ID: 12293 Contact: Daren/Michelle 800.315.9950 Ext. 603 www.LBXonline.com

30 HP. - Item ID-11744 - Daren 800-315-9950 x603 Vertical edger for RH mill - 50 HP, 20” F saws with carbide bits, solenoid valves, splined arbor. Good looking edger. Price : 10,500 USD - Item ID11781 - Daren 800-315-9950 x603

FIREWOOD PROCESSORS

2001 Multitek 2020 ldsc firewood processor with 20ft conveyer - Engine and

Save Your Stubs & Pieces!

Let us reprocess them $25 per 100 Now have Factory Seconds $25 per 100 sticks

For Classifieds Call Your LBX REP at 1-800-315-9950

The Original Lumberman’s Exchange n 7


WE ARE OVERSTOCKED! PRICES REDUCED! TAKE ADVANTAGE OF THIS CHANCE TO SAVE BIG! 9802 North Vancouver Way Portland, Oregon 97217

When Calling Ask for Dept LX • machsales@msn.com

Ph: 503-285-6691 • Fax: 503-285-0449 World’s Largest Inventory New & Used Sawmill & Planing Mill Equipment

Coastal Narrow Lumber Planer

L&B 6’ Air Strain Bandmill

L&B 7’ Air Strain Bandmill

Bandmills & Headrigs Kockums L&B 7’ Air St. Bandmill Kockums 6’ Air Strain Bandmill Mebor Horizontal Bandmill Salem 6’ Air Strain Bandmill Salem 5’ Air Strain Bandmill L&B 6’ Air Strain Twins McDonough 62” Twin Air Strain Carriages & Drives Salem Linear 36" 2-Block Tyrone 240 Hydraulic Drive Corley 40” Hydraulic 3-Block Salem 24” 3-Block Linear Carriage USNR 2000, 42" Stud Carriage Salem 60” 4-Block Carriage Salem 42” 4-Block Carriage Chippers & Screens Precision 58” Horizontal Feed Arasmith Lilly Pad Chipper Precision 48” 8-Knife Drop F. BM&M 5’X14’ Screen Rotex 6’X16’ Screen West Salem 58" Horizontal Feed Precision 8X8 Screen Kockums 8X8 Screen Precision 66" Horizontal F. Precision 118” HFBD Chipper Precision 96” Whole Log Precision 48” Horizontal F. CM&E 36” Rechipper Debarkers Nicholson 22” A-5 Debarker Nicholson 35" A-2 Debarker Nicholson 44” A-2 Debarker

Over 13 Acres

of

Edgers, Gangs & Ripsaws Mereen-Johnson 424DC Ripsaw Pinheiro Dip Chain Ripsaw Paul Gang Ripsaw Globe Panel Ripsaw Kimwood Short Block Ripsaw Globe Strip Saw Salem Late Model Combination Edger Mereen-Johnson 48” Ripsaw Filing Room Equipment (3) Vollmer CH210 Auto Sharpeners Gockel 163” Mag Bed Grinder Armstrong 3-10C Stretcher Roll Vollmer Cana E (8) Wright Mod. 1801 (3) Weinig R 934 Profile Grinder Newman G-200 Grinders Hanchett Knife Grinders (10) Wright W-1600 Auto Tipper Armstrong No. 90 Equalizer Armstrong Dual Side Grinder Armstrong Side Pro Armstrong No. 4 RH B.S. Grinder Armstrong No. 25 Circle Hanchett DN-40 Knife Grinder Armstrong No. 4 LH B.S. Grinder Armstrong No. 4 B.S. Stretcher Roll Hogs & Pulverizers Jeffrey 36 x 60 Shredder Jacobson Horizontal Hog Zeno Low-Noise Grinder West Salem Big Brute Grinder Jacobson Hammer Mill W. Salem 52” Horizontal Grinder Jeffrey 76WBH Horiz. Hog Gruendler 50XE Hammer Hog Miscellaneous (2) Peerless 24-Unit Bins Tektronix Log Metal Detector Dog Ear Machine

Morbark Stac Trac, NEW Industrial 3496 Finger Jointer Industrial FJS-25 Finger J. System Hurricane 28” Chop Saw Fruilmac End Matcher L&M Log Cut-Off Saws Timesaver Sanders (6) Lumber Stackers (3) Irvington 20’ Trimmer, 1’ Saws 5-Arm Hyd. Tilt Hoist Sticker Recovery System Planers & Moulders Yates-A-63 16-Knife Planer Pkg. Coastal 16-Knife 9” Planer Pkg. Weinig 22B Complete Line Weining 22A 5-Head Stetson-Ross Timber Sizer Mattison 226 12” Moulder Mattison 228 16” Moulder Diehl 6-head TF Moulder Buss 55 Double Surfacer Buss 88 Double Surfacer Wadkin 6-Head Moulder Weinig U22A, 6-head Newman 382 Double Surfacer Newman M712 12-Knife S-R 6-10-A1 10-Knife Coastal 24” 20-knife Planer S-R 6-14-D1 24” 16-Knife S-R Chip Blankers Weiniig P22N 5-Head Resaws Salem 5’ Air Strain Horizontal Smith Twin Horizontal Resaw McDonough 54” Twin Horizontal 36” Tri-State Tilting Resaw Turner 48” Rollfeed Resaw Turner 52” Rollfeed Resaw Salem 6’ Horiz. Air Strain Kockums 6’ Horiz. Twin Air Strain

WE ARE PARTING OUT

Woods Planers 412M, 414M, 407M, 409M. 415M Woods Moulder 132M Yates Planers A-20, A-62, A-66 Stetson-Ross Planers 6-12-A1, 6-12-C1, 6-10-A1, 6-14-D1 Mattison Moulders 276, 226, 228 SAVE BIG ON MOTORS AND MAJOR PARTS!

Great Buys On Used Equipment!

For complete equipment list, visit our website:

www.machinerysales.com

Or Call and Ask for Dept. LX

( 8 6 6) 241-2977


Hydraulic pump replaced 820 hrs ago. Yanmar 65hp diesel engine, 404 Pitch Chain. This machine has a total of 3000 hours total on the machine Item ID-12131 - Daren 800-3159950 x603 2005 Built-Rite model 50 SCP processor - Includes Auto log stop, 3 strand live deck, 4 1/2” cylinder, cab with heat & A/C, 750 hrs, 68 HP Kubota diesel $42,000 USD - Item ID-11619 Daren 800-315-9950 x603 2005 Multitek 2040xp2 + 30’ Conveyor - 2005 2040xp2 firewood processor, 80 hp John Deere Diesel, 30’ Conveyor, 2-strand roller chain, hydraulic lift, 40’ long, 20” log capacity, 8-way wedge, 3,300 hours 5th strand live deck arm for processing blocks as short as 24” (normally a $2,000 option), Very Well Maintained Heated Operator Cabin, Pilot Electric/ Hydraulic Joysticks Safety Seat, Clean Out Pan Option

(normally $1,000 option Price : 80,000 USD - Item ID-11871 Daren 800-315-9950 x603 2006 Timber Wolf Firewood Processor with 26’ conveyor 1750 Hrs, auto cycle, operator cab, - Item ID-12020 - Daren 800-315-9950 x603 2009 Pro Model Multitek 2040xp2 ss Firewood processor with 60” circle saw - 80 hp John Deere, 16 way splitter head, overhead grapple system, night processing light kit, 4 stand live deck, heated and A/C Cab. Also including Multitek FWC-30 conveyor. All in excellent shape and stored inside. Machine and Conveyor has +/- 800 hours. New over 160k. - Item ID-12220 - Daren 800-315-9950 x603 Best Value Portable Log Splitter - Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start

Contact Us for Your Equipment Needs. If we don't have it, we can find it!

Make an Offer! Complete Package!

‘09 Pro Model Multitek 2040XP2 SS Firewood Proc. w/60” Circle Saw Item ID: 12220 Contact: Daren/Michelle 800.315.9950 Ext. 603 www.LBXonline.com

Forks & Bucket. Complete Package! Low Price! 38 Hours! Item ID: 12188 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA - Item ID-12062 - Tom 800315-9950 or 615-349-1890 x604

FORKLIFTS

2008 Terex PT100 Skid Steer w/Mulcher

1985 Cat 8000# Forklift - V80E

type d. Axle repaired and transmission fixed. Price : 7,000 USD - Item ID-12124 Daren 800-315-9950 x603 1995 Nissan Forklift - 15,500lb Capacity, Model: DF05N70V, Diesel, Pneumatic, Side Shift, 2-Stage Mast, 177 Max Mast

304.872.2988

98 Franklin 170B - cable skidder, 6 BT Cummings power plant, Recently engine work includes, new turbo, head rings, injector pump, and oil pump, tires are fair.................................................. $23,000 03 Cat 525B - Single function grapple skidder, Motor rebuilt less the 10 hrs ago, 9200 hrs showing on machine, also has winch, tires are about 65%, newly painted and ready for work...................... $52,500 07 John Deere 648GIII - Dual arch skidder with winch, New tires are 24.5 x 32, machine showing 4400 hrs, repacked arch lift cylinder on left side, fresh paint ........................................................... $100,000

PROFIL

GROUND OTH

99 Int Eagle - N 14 525 Cummings motor, 18 spd Eaton trans, 46 full locker rears, Tag axle at rear of frame, 4 sets of bunks, set up to pull pup trailer ........................................................... $37,500

E

TO

94 Bandit 1400 Track Chipper - 6 BT Cummings power plant, Cat U/C at 60%, Disk style chipper head, continous rotating grapple, 14 in tree max for chipping, showing 5128 hrs..................... $41,000

Top Quality Blades with Precision Ground Technology Available in 13°, 10°, 9°, 7°, and 4°.

• Extensive flex life allowing multiple sharpenings • Largest selection of widths, thicknesses and profiles • Custom lengths to fit all brands of thin-kerf sawmills Lames de scie à ruban – alliage de haute-qualité Lames à bande d'alliage haute qualité

For Classifieds Call Your LBX REP at 1-800-315-9950

• Ideal for resawing applications

• Stellite® Tip Technology

• Quality cut and high feed rates

• Longer run times

• Computerized set for accuracy • Consistent grind

• Withstands multiple sharpenings • Saws abrasive and exotic wood

800.522.5760 SawFaster.com

The Original Lumberman’s Exchange n 9


UPON INSTRUCTIONS FROM THE COURT-APPOINTED RECEIVER

2 LARGE SAWMILL

AUCTIONS AUCTION #1

AUCTION #2

4

DAYS

NORTHERN SAWMILLS INC.

SEPT 27 & 28, 2011

SEPT 29 & 30, 2011

PREVIEW: SUN & MON, SEPT 25 & 26 OR BY APPOINTMENT

PREVIEW: SUN & MON, SEPT 25 & 26 OR BY APPOINTMENT

TUES & WED @ 9AM CDT HWY 623 / SAPAWE RD., SAPAWE, ONTARIO

THURS & FRI @ 9AM EDT 490 MAUREEN ST., THUNDER BAY, ONTARIO

2005

(1 oF 4) 2004 CaRBoteCH Mark III 18” Ring Debarkers

Cat 980C Log Loaders

ComaCt DDM 12 Log Processor

3 SAWMILLS ~ EQUIPMENT AS NEW AS 2005 Featuring: (2) ComaCt DDM6 & (2) ComaCt DDM12 Saw Processing Lines to 2005 • Edger Optimizing Lines • (15) Debarkers to 2002 • (5) Lumber Sorters • (10) Filing/Grinding Rooms with Equipment to 2006 • 3 PLANEr MILLS with (4) StetSon RoSS Planers • (12) Chip Bins • (6) Dry Kilns • (8) Chippers • (14) Chip Screens • (oveR 15) Blowers and Feeders to 200hp • Mobile Equipment: (15) Wheel and Log Loaders • (20) Forklifts to 22,000 lb. cap. • (5) BaRko Log Loaders • Graders, Scissor and Man Lifts, Skid Steers, Dozers • Huge Electrical Inventory featuring (oveR 40) aB Centerline MCC’s, Transformers to 4000kVA, Distribtion Cenetrs, Switchgear, Teck Cable • Large Maintenance and Machine and Fab Shop Areas • (10) Buildings to 40,000 sq. ft. Complete Information & 16-Page Pictorial Brochure Available for Download at www.maynards.com 1837 Main St., Vancouver BC V5T 3B8 Tel: 604 876-6787 AUCTIONS | LIQUIDATIONS | APPRAISALS

10 n

September 2011

www.maynards.com

For More Information Please Contact Mike Mcintosh | 416 242-3560 | mmcintosh@maynards.com Mike Seibold

| 604 675-2227 | mike.seibold@maynards.com

Visit us online at www.LBXonline.com!


UPCOMING AUCTIONS

Lumber, Trim & Moulding

Early 90s Case 850B Item ID: 12297 Contact: Daren/Michelle    800.315.9950 Ext. 603 www.LBXonline.com

Doors & Hardware

Huge 2-Day Auction ONLINEOnsite ONLY AUCTION North Carolina 2011Wilson, BCA Construction Accepting Monday, December 6th at 10:00am Design EXPO & Auction Consignors! to Thursday, December 9th at 12:00pm Allen County War Memorial Coliseum Fort Wayne, Indiana

ONLINE ONLY AUCTION September 29, Thursday Las Vegas, Nevada Begins at 1:00 p.m.

September 28, Wednesday Begins at 1:00 p.m.

Details Coming Soon!

Featured Equipment:

Featuring Tools, Building Products, Landscaping and Industrial Equipment

Featured Equipment:

Featuring Dozers, Payloaders, Off Road Trucks, Cranes and More!

HUGE 2-DAY ONSITE AUCTION Houston, Texas Online Auction

‘04 Timberking 560 Knuckleboom Log Loader

Industrial Equipment

Item ID: 12294 Contact: Daren/Michelle 800.315.9950 Ext. 603

www.LBXonline.com Height, Hour Meter Reads: 8,224, S/N: 001800 - Item ID11892 - Daren 800-315-9950 x603 1998 Gradall 534D Shooting Boom Forklift; Cummins Diesel; Hydrostatic Transmission w/ shuttle shift; Body- good, 40ft Boom, Forks Attached, Auto Leveling, Aux hyd; Glassgood; Tires- 13-24 2@50%, 2@65% (foam filled); Color - Blue - Item ID-12227 - Tom 800-315-9950 or 615-349-1890 x604 2000 Hyster H155XL Forklift - 15,000 lb Capacity, LP Gas, Rough Terrain, Pneumatic, Tilt, Side Shift, 2-Stage Mast, 173.2 Max Height, Hour Meter Reads: 3,938, S/N: F006D05789X - Item ID-11893 - Daren 800-315-9950 x603 2004 Moffett Model M5500 Truck Mounted Forklift 1418 Hours; Kubota Diesel; 4’ Forks, Side shift, 4 Way steer, 12’ Mast, Tires Front 31.5X13-

Details Coming Soon! Building Systems Manufacturing

Anderson, Indiana

Call (877) 357-8124 or Visit Us Online at

Indiana Auctioneer License # AC68900001

www.CharlestonAuctions.com Bidding Begins: Tuesday, October 4 at 10 a.m. Bidding Ends: Thursday, October 6 at 12 noon Featured Equipment:

2010 KLAISLER Rolsplicer, 2000 PCS HERCULES Live Deck, PORTER CABLE 7HP Air Compressor, (2) TEE-LOK Dbl Gantry Truss Lines, 2005 MITEK Elipsaw, 2002 TCT 1100 Linear Saw, 2001 ASI Roller Bed Trailer, 1986 Timbermill 6B-20, 2000 MITEK Flat Stacker, Large Qty of Kiln Dried Lumber, 2005 VIRTEK LPS-6 Laser System, VIRTEK LPS-2DI Red Laser Heads, Norfield 1020 Double-End Trim Saw & More!

Call (877) 357-8124 • Details at www.CharlestonAuctions.com 16.5, Rear 31X15.5-15. If you deliver products on a truck, this forklift goes with you. Top brand in the industry. Priced to sell. - Item ID-12069 - Tom 800-315-9950 or 615349-1890 x604 Case 586C Forklift - Forklift with good rubber, good brakes and runs good. Has side shift. 1982 year model. Case 4-cylinder. ITEM IS SOLD!!!! - Item ID-11457 Daren 800-315-9950 x603

GENERATORS

350 KVA Cummins - Genset with 9000 hours. - Item ID11994 - Daren 800-315-9950 x603

KNIFE GRINDERS

Hanchett Circular saw grinder - This circular

saw grinder appears to be capable of grinding up to a 36” diameter saw. Plate info: Size 724. Serial # 8109 - Item ID-11746 - Daren 800-315-9950 x603 Schneider Pattern Knife Grinder - Item ID-11743 Daren 800-315-9950 x603

Logging Equipment

1961 Caterpillar 944 Wheel Loader - Tire, Brakes, Bucket all are in good shape, Machine is Ready to work Serial #43A1589 - Item ID12156 - Daren 800-315-9950 x603 1974 BARKO 160 Knuckleboom Loader Log Loaders/Stackers - Detroit engine, mounted on IH truck, with Barko 42 grapple Price

For Classifieds Call Your LBX REP at 1-800-315-9950

: 15,500 USD - Item ID-11979 Daren 800-315-9950 x603 1975 Ford 6500 Front Loader - 1975 6500 Series Ford Industrial Tractor with 256 cid. ford diesel engine & hydrostatic transmission 3 speeds fwd & 1 reverse. Tires at 25%. Strong machine with high capacity for lifting or pushing. Has (4) 1000 lb. ctwts. Could have backhoe added. Loader bucket is 3 FT by 8 FT. Weighs about 25,000 lbs. Decent tractor but needs new block which can be bought for $2800 from dealer. - Item ID-12200 - Tom 800-315-9950 or 615-349-1890 x604 1976 Clark 664 Cable Skidder - Approximately 7500 hours.

The Original Lumberman’s Exchange n 11


2004 CAT 525B Grapple Skidder

Item ID: 12296 Contact: Daren/Michelle 800.315.9950 Ext. 603

www.LBXonline.com S/N 514F-2341-CAC. Strong Clark Winch; Tire chains; Pulls good. - Item ID-12249 - Tom 800-315-9950 or 615-3491890 x604 1977 (est) JD 540A Cable Skidder - Nice little unit that still runs well. 28L tires at 35%. JD engine. Hour meter not working. - Item ID-12199 - Tom 800-315-9950 or 615-3491890 x604 1978 CAT 518 Grapple Skidder

Morbark 58” Chip-Pack Item ID: 12292 Contact: Daren/Michelle 800.315.9950 Ext. 603 www.LBXonline.com

- 23.1x26 Tires, tires 40%, Gearmatic Winch & Esco Grapple, Center Pins are tight Price : 22,000 USD - Item ID11800 - Daren 800-315-9950 x603 1979 JD 440C Cable Skidder - Rebuilt Deere 4 cyl. engine; Manual Transmission, Bodygood, open cab w/ ROPS, dozer blade, diff locks, winch with cable; Tires - 16.9 x 30 4@30%; Hour meter shows 3400. Color - Yellow. VIN #: 440C334150T - Item ID-12091

- Tom 800-315-9950 or 615-3491890 x604 1980 DEERE 540B Grapple skidder - Swinging Grapple, winch, front tires are 70% and rears are 85% or better, new batteries and a new seat. Item ID-12010 - Daren 800-3159950 x603 1982 540B Grapple Skidder New engine and Transmission 2000 hrs on both, bottom center pin is new, top has a little wear, tires are at 40% power shift Transmission. Pictures are coming soon Price : 23,000 USD - Item ID11569 - Daren 800-315-9950 x603 1984 DEERE 540B - cable skidder, New 23x126 tires on rear. 8000 hrs Price : 18,000 USD - Item ID-11875 - Daren 800-315-9950 x603 1984 John Deere 640D Cable Skidder - NEW TRANSMISSION; John Deere 6cyl Diesel Engine; 30.5 x 32 tires at 70%. Great flotation. Winch works well; Runs good. VIN #: 640DC513656 NC - Item

ID-12092 - Tom 800-315-9950 or 615-349-1890 x604 1985 Timberjack 230 Cable Skidder - Still a strong working machine. Detroit 3-53 recently rebuilt. 28L tires at 30 - 40%, PLUS 2 spare axles, 3 spare tires & riims, and a spare transfer case! Winch pulls strong. Excellent value! - Item ID-12272 - Tom 800-3159950 or 615-349-1890 x604 1986 Peterson Portable Flail Debarker - Excellent Condition. 4600 hours. Cummins 6 cylinder engine. Ready to work. CA - Item ID12187 - Tom 800-315-9950 or 615-349-1890 x604 1987 Cat 988 Loader with Forks - 27,000 hours. Fair Condition. Big capacity. - Item ID-12186 - Tom 800-315-9950 or 615-349-1890 x604 1987 FORD L9000 - TWO BUNK OR 4 SETS OF BOSTERS, 366,000 mile, vin#A55219 tri axle, Cat 3406 diesel engine, 8LL transmission and 370 rears, prentice 120c Price : 29,000 USD - Item ID-11844 -

P.O. Box 170 • Prentice WI 54556-0170 • 800-243-5438

www.multitekinc.com • sales@multitekinc.com

Multitek Firewood Processors Increase Your Productivity and Profitability • Quality Equipment to Reduce your Labor Costs • Circular Saw or Bar & Chain Models • 7 Models to Choose From • Production Ratings up to 5.5 Full Cords Per Hour

Made in the U.S.A.

12 n

September 2011

Visit us online at www.LBXonline.com!


Priced to Sell 2008 Morbark 3800 Wood Hog Great condition. Priced to Sell! Item ID: 12277 Contact: Tom  800.315.9950 Ext. 604 www.LBXonline.com Daren 800-315-9950 x603 1988 DEERE 648D - Front tire are 70% rear are 50%, Machine runs good Price : 15,500 USD - Item ID-11432 Daren 800-315-9950 x603 1988 FORD L9000 - 425 hp Caterpillar engine, 702,000 miles, 10 Spd transmission, air ride suspension, with a Prentice knuckleboom loader Price : 22,000 USD - Item ID11846 - Daren 800-315-9950 x603 1988 John Deere 548D Grapple Skidder - approx. 10,000 hours, 28/26 tires, center pins are tight, machine is dry, $2000 upgrade has been done to the blade. Machine is located in the southeast. Feel free to see the video at: http://www.youtube.com/ watch?v=3S3_rN6dh1I - Item ID-12209 - Daren 800-315-9950 x603 1989 CAT D5H TSK - 1989 CAT D5H TSK, WITH WINCH & FAIRLEED-GOOD PAINT-GOOD SHAPE, 6-Way - Item ID-12029 Daren 800-315-9950 x603 1989 Clark 666 Dual arch grapple skidder - 1989 Clark 666 Dual arch grapple skidder, The machine has a new cummins 5.9l engine with less than 300 hrs on it. A new grapple with around 50hrs, 2 new interstate batteries and a new starter on it. It fires right up even in the winter. This machine is ready to work!!! Item ID-12219 - Daren 800-3159950 x603

2006 JD 748GIII Dual Arch Skidder Item ID: 12117 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

1990 John Deere 640D Grapple Skidder - 1990 John Deere 640D Grapple Skidder, Single arch, Esco grapple, 30.5-32 tires. - Item ID-12214 - Daren 800-315-9950 x603 1991 Cat 518 grapple skidder - 1991 Cat 518 grapple skidder All belly pans and sheet metal were removed so the machine could be steam cleaned. All the cylinders have been packed. The radiator is rebuilt with new tanks. New starter has been installed. A couple of new guages were installed. New hinge pins and steering pins installed. All filters and fluids have been changed. Many hoses have been replaced. Winch has been rebuilt. Brakes work good. New exhaust muffler and pipe installed. Tires have about 35% tread. Seat is in good condition. New paint and decals. - Item ID-11832 Daren 800-315-9950 x603 1991 Hydro Ax 221 - 1991 Hydro Ax 221 hour meter broken good tread good running condition includes bush hog attachment - Item ID-11769 - Daren 800-315-9950 x603 1991 Hydro Ax 221 - 1991 Hydro Ax 221 John Deere, 4-cylinder Koehring 18” high speed disc saw 28L x 26 tires enclosed cab with heat and air - Item ID-11770 - Daren 800315-9950 x603

When You Buy Your Circular Saws From B.H. Payne You’ve Bought the best... We Guarantee It! Traditional Quality Combined With Todays Technology Quality Brand Reg. U.S. Pat Off

Circular Saws Saw Bits and Shanks Circular Knives Carbide Tipped Saws Carbide Strobe ® Saws B.H. Payne & Company Saw Manufacturers

Call 800 752-0627

Make Sure To Ask For Our Free, Complete Saw Catalog We Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels, Knife Grinding Wheels, Saw Gumming Wheels & Knives.

Here’s What You Get With Every B.H. Payne Saw • Saws manufactured from only the Highest Quality Nickel Alloy Steel. • Each Saw Milled with State-Of-The-Art Precision CNC Milling Machine. • We Tension Your Saw to Your RPM Speed BEFORE Leaving Our Factory. • Your Satisfaction - Completely Guaranteed.

B.H. Payne & Company, Inc. P.O. Box 90608 East Point, GA 30364 404 761-8711 Fax 404 761-5398 “Since 1890” E-mail: info@paynesaws.com

For Classifieds Call Your LBX REP at 1-800-315-9950

Web Site: www.paynesaws.com

The Original Lumberman’s Exchange n 13


Real Tuff Baler&Baggertm Save $$$ on Bedding—Bale it Yourself! Electric or Diesel, Manual or Automatic

Hard to Find These $14,907 Effective May 1, 2011

REAL TUFF INDUSTRIES

1993 Valmet 603 3-Wheeled Feller Buncher

Manufactured by M & F Gauge & Specialty Co., Inc.

PO Box 693 Brownwood, Texas 76804 Phone: 325-641-8300 Fax: 325-643-3243

BUILT TO LAST www.realtuffbaler.com

Dear Prospective Customer,

Thank you for inquiring about our Real Tuff Baler! From baling wood shavings to aluminum cans, the Real Tuff Baler is built to last, and priced for a quick return on your investment!

Real Tuff Baler

Real Tuff Baler Dimensions & Specifications

• Easy to use • Built of high quality materials and workmanship • Heavy duty to enable a broad spectrum of baling options • Easily loads by conveyor or manual method

- (2) Hydraulic Cylinders are controlled by using a two spool valve - 30 H.P. motor (220/440 volt 3 phase) starter not included - 50 Gallon reservoir capacity

. Easy to use

. Built of high quality materials and workmanship

- Only the highest quality industrial com. Easily loads by conveyor manual method ponents areor used . Heavy Duty to enable a broad spectrum of baling options

Most Popular Baler Sizes

Real Tuff Industries Bale Size

4.0 cubic foot bale 3.5 cubic foot bale 3.9 cubic foot bale 3.0 cubic foot bale 0.4 cubic foot bale

Bales per Hour

50 - 60 bales per hour 50 - 60 bales per hour 50 - 60 bales per hour 50 - 60 bales per hour 50 - 60 bales per hour

Phone: (325) 641-8300 Fax: (325) 643-3243 . Custom baler’s can be manufactured to your specifications .

Real Tuff Baler Dimensions & Specifications Manufactured by M & F Gauge Specialty Co., Inc. 2 - Hydraulic& Cylinders are controlled by using a two spool valve 30 H.P. motor (220/440 volt 3 phase) starter not included PO Box 693 • Brownwood, Texas 76804 25 G.P.M. Pump 50 Gallon reservoir capacity Only the highest quality industrial components are used www.realtuffbaler.com Real Tuff Baler Price: $12,997.00

Terms: 50% deposit upon receipt of purchase order. The blance is due upon completeion which will be approximately thirty days from placement of order. F.O.B. Brownwood.

03/08

14 n

September 2011

Item ID: 12290 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

- 25 G.P.M. Pump

Real Ruff Baler Size 12” x 16” x 36” 12” x 16” x 32” 11” x 17” x 36” 8” x 18” x 36” 5” x 10” x 16” - Call For Price

New recon engine, tire chains.

1991 John Deere 548D Grapple Skidder with winch, machine is tight and ready to work - Item ID-12208 - Daren 800-315-9950 x603 1992 Ford L8000 with a 1996 Series XL235E Log Loader - Serial # 1FDYW82A8NVA07578, TK Body Style, 307,000 miles, 225 hp, 7 speed Transmission, a/c, 410 gear ratio, hendrickson suspension 1996 Series XL235E Log Loader, new complete engine, 116 hp, 42” Log Grapple, - Item ID-12025 - Daren 800-315-9950 x603 1992 John Deere 643 feller buncher - Complete rebuild & paint less than 1000 hrs ago. New 28 L tires under 300 hrs. Brand new ice chains are included. All pins are tight, cylinders are dry. Strong hydraulics & hydrostats. Strong 6.8 L turbo diesel, 175 hp, no smoke or blow by. Many new parts & hoses. Has some minor hydraulic leaks & minor slop in the accumulator arm. Great brakes. E -brake needs adjusting, back up alarm doesnt work. No heat or a/c. - Item ID-12285 - Chris 800-315-9950 x600 1992 Linkbelt LS 4300 Log Loader - No Hour reading. Runs well. S/N 43OU25351; Isuzu Motor Young Live Heel Boom & Grapple; Elevated Tilt Cab; - Item ID-12251 - Tom 800-315-9950 or 615-349-1890

1990 CAT D4 Grapple Dozer Item ID: 12324 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

x604 1992 Prentice 180D Log Loader - with Cummins engine mounted on Pitts Trailer. Good condition with 7,700 hours Price : 23,000 USD Item ID-11434 - Daren 800-3159950 x603 1992 Timberjack 240 Cable Skidder - New drop in 4 Cyl. Cummins engine. New transmission. 23.1 x 26 Tires 80%. Chains 75% good. Gearmatic winch. Just spent $4000 on brakes. Excellent value. FOB: NH - Item ID-12274 - Tom 800-315-9950 or 615-3491890 x604 1993 FREIGHTLINER FLD12064ST - Detroit 60 series engine, 425 hp, 18spd transmission, 4.10 gear ratio, Barko 80 LOADER, Reman TRANS Dec. 07, Both rear end recently rebuilt, full synthetic fluids in trans & rear ends. Full double frame. Full Locking Rears. Well Maintained Truck Bed legnth 19’6”, air ride suspension Front tires 60%, new set of drives Price : 31,000 USD Item ID-11641 - Daren 800-3159950 x603 1993 Prentice 210 Loader on Trailer - Very clean unit. Works well. Cummins engine. 9355 hours. Bar Saw hydraulics. Heat and AC. Some cosmetic dents. Great value. - Item ID-12289 - Tom 800-315-9950 or 615-349-1890 x604 1993 WHO P12-63XSHD - 700 HP CAT 3412 Engine, owner

Visit us online at www.LBXonline.com!


used it to grind mulch, comes with misc. parts, Approx. 13000 hours and is working daily. Engine was rebuilt by Cat 4500 hours ago. Owner is selling due to buying a larger machine. This machine won’t last!!! - Item ID-12139 - Daren 800-315-9950 x603 1994 Cat 518C Skidder - The engine was rebuilt 3 months ago. An extra Lufkin winch is included. Has 3400 size tires on it. - Item ID-11856 - Daren 800-315-9950 x603 1994 John Deere 640E Cable Skidder - Screened in Cab, 23.1 x 26 tires Ice chains rear and Bear Paws on the front. Exellent condition. Hrs are 11,000 - Item ID-11653 - Daren 800-315-9950 x603 1995 Bobcat 753 Skid Steer Loader - Excellent condition. One owner. Very well maintained. S/N 512723173. TX - Item ID-12165 - Tom 800315-9950 or 615-349-1890 x604 1995 Hanover Model D3 Forwarder - 5156 Hours. Loader has great lift

capacity. Tires 70% or better. Adjustable bunk extension for longer wood. New exhaust. New batteries. Strong engine and transmission. Has 8 work lights. TX - Item ID-12162 Tom 800-315-9950 or 615-3491890 x604 1995 Hydro-Ax 411E - 7236 hours, 18” Koehring Sawhead, 28L-26 Tires, 4WD, inclosed cab w/heat Price : 22,000 USD - Item ID-11673 - Daren 800315-9950 x603 1995 International 9300 Log Truck - Tri-axle, with 235,000 original miles. Has 2007 Hood 7000 loader. Drive tires are 98% stear tires are 50% and tag tires are 50%; Dayton hubs. 46,000 rears. - Item ID11502 - Daren 800-315-9950 x603 1995 JD 290D with Hytec 4700 Harvester Head - 290D in good condition. Engine just overhauled. Undercarriage at 50%. Cab has heat and air with stereo and all run well. Head recently updated and does great job in hardwood

Morbark 30/36 WCL Whole Tree Chipper Item ID: 12256 Contact: Daren/Michelle 800.315.9950 Ext. 603

www.LBXonline.com with stroker extension that shoots out at tough limbs. Priced to sell! - Item ID-12206 - Tom 800-315-9950 or 615-3491890 x604 1995 Timberjack 380C Cable Skidder - Very clean unit. Working today in hardwood. Less than 3000 on rebuilt Cummins 6BT engine. Tires at 70%. Winch works great. - Item ID-12273 - Tom 800-3159950 or 615-349-1890 x604

‘02 JD 648GIII Dual Function Grapple Skidder

Item ID: 12231 Contact: Daren/Michelle 800.315.9950 Ext. 603 www.LBXonline.com

1996 511EX Hydro-Ax With Bunching Saw Head - Hours est at 6800. Only 200 hours on factory reconditioned hydraulic motors and pumps. Comfort cab with working air. 28L tires with chains at 50%. Saw head has side pocket for cutting larger trees. Very well maintained machine. - Item ID-12072 - Tom 800-315-9950 or 615-349-1890 x604 1996 BARKO 275B - 6BTA

Introducing the New BP Dominator™ the Highest Production Stationary Band Sawmill Available on the Market.

The Model 3650E BP Dominator Stationary Baker Band Sawmill comes in 16 and 20-ft models.

 Even more user-friendly than any mill ever made before!  36”-diameter, all steel band wheels!  Super-fast and precise saw head movement!  Very rugged track made out of large, steel I-Beams!  50-hp electric motor! See Us At the d Fiel Woodsmen’s in  Computer setworks come Days show rk, Yo ew standard! Boonville, N 2011, -20, August 19 Booth 8!

CONTACT BAKER PRODUCTS TODAY FOR FREE www.logtolumber.com LITERATURE AND VIDEO! Call toll-free: (800) 548-6914 eMail: info@bakerproducts.net Phone: (573) 663-7711 Fax: (573) 663-2787

For Classifieds Call Your LBX REP at 1-800-315-9950

The Original Lumberman’s Exchange n 15


Best Price on Market!

2008 Valmet 890.3 20-Ton Forwarder Low hrs. Tracks! Item ID: 12263 Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com Cummins Engine, 52” Rotobec Grapple - Item ID-12076 Daren 800-315-9950 x603 1996 Freightliner 120c knuckleboom mounted behind cab, Cat 10 speed. Great for picking up logs and loading. Price : 28,000 USD 16 n

September 2011

‘98 Freightliner FLD12084 SD Log Truck w/’04 Hood 7000 Loader Item ID: 12235 Contact: Daren/Michelle    800.315.9950 Ext. 603 www.LBXonline.com

Item ID-11435 - Daren 800-3159950 x603 1996 Timbco 445-B w/ 22” Quadco Hot Saw - 40 degree tilt, Self- leveling, 4000 hours on old meter, on new meter 6530 hours, - Item ID-12037 Daren 800-315-9950 x603 1997 Barko 160C Knuckleboom Loader on Trailer - Nice loader. Cummins

6 Cyl engine. 8400 hours. Pitts trailer. Standard lever controls. Rotobec 4642 continuous grapple. - Item ID12229 - Tom 800-315-9950 or 615-349-1890 x604 1997 Cat 515 Skidder - Cab has A/C. Has 28L26 tires. Engine rebuilt 9 months ago. Item ID-11857 - Daren 800-3159950 x603 1997 CATERPILLAR D5H TSK II - 6330 hours, 6/Way Dozer, Canopy w/Sweeps, Winch, Esco Single Function Grapple :U/C 60% approx., Pads 22in SBG R/P/B 50% SEGS 50% BAL,50% Track Guards : Front/Rear/ Side Screens, Grapples w/Ext, shipping dimensions weight 43,000lbs HEIGHT 10ft 5in LENGTH 17ft 10in WIDTH 8ft 9in - Item ID12012 - Daren 800-315-9950 x603 1997 CLARK 666 Dixie Special - Grapple, winch, heat and air, Cummins 6BTA 6cyl engine, 177HP, 80” Grapple, Grapple fully open is 10’ from the outside edges. This

machine is in excellent condition and is a must see, it has approx. 5000 hours, center pins are in great shape, Tires are very good rears are 98% and fronts are 85%, Don’t let this machine pass you by!!! - Item ID-12137 - Daren 800315-9950 x603 1997 Husky XL235 on Mack Truck - Fair condition but runs good. Good back up loader. Standard lever controls. Clean for its’ age. Priced to sell. - Item ID-12066 - Tom 800-315-9950 or 615-3491890 x604 1997 IH 4000 Truck with Prentice Loader - 6 Cyl. Diesel engine; 26000 GVW. Used as yard machine. Loader runs and lift good. - Item ID-12261 - Tom 800-315-9950 or 615-3491890 x604 1997 MACK CL713 with 18ft Petty built Pup trailer replacement engine with 220k in Dec. 09, NEW! 18sp tran replaced by Mack Dec.08, 120C Prentice Loader, 22.5FT Rack, with Petty Built Pup

Visit us online at www.LBXonline.com!


Trailer (18.3ft).... Drive tires are at 40% and ster tires are rated at 50-60% Price : 35,000 USD - Item ID-12130 - Daren 800-315-9950 x603 1997 Timbco 425C with bar saw - 75% undercarriage, 8.3 Cummins engine, Leveling Cab, new rails, 9700 hours, Machine is dry and ready to work - Item ID12204 - Daren 800-315-9950 x603 1998 Barko 160C Loader with Slasher 7749hrs; Pitts trailer; 6.8 Powertech John Deere engine; CSI saw with 17’ deck. Strong Loader. Lever Controls. Runs well. - Item ID-12197 - Tom 800-315-9950 or 615-349-1890 x604 1998 Barko 160D Loader - s/n 22409 6cyl Cummins engine, Lever controls, Continuous rotation grapple. Trailer and delimber are not included - Item ID-12207 Daren 800-315-9950 x603 1998 Cat 525 Grapple Skidder - 30.5-32 tires, Lufkin winch, Esco grapple - Item ID-12295 Daren 800-315-9950 x603 1998 Clark H67 Grapple Skidder - Good skidder with Cummins 6 Cylinder Power. Dual Arch Grapple. AC works well. 28L Tires at 40%. Strong winch. - Item ID-12276 - Tom 800-315-9950 or 615-349-1890 x604 1998 Freightliner FLD12084sd Log Truck with 2004 Hood 7000 Loader - Less than 15,000 miles on complete engine overhaul, Tires are in good shape front and rear, 2004 Hood 7000 Loader, 3-stage pump, 22 foot boom with bypass grapple, Pup Trailer is for sale as well. - Item ID-12235 - Daren 800315-9950 x603 1998 Komatsu GD650-A Motor Grader 11,000 hours. Good condition. Comfort Cab with Heat/AC. 14’ MB; Ripper package. S/N C004848. Excellent Value. - Item ID-12255 Tom 800-315-9950 or 615-349-1890 x604 1998 PRENTICE 310E - Machine is ready to work, overall condition “GOOD” - Item ID12033 - Daren 800-315-9950 x603 1998 PRENTICE 620 WITH DENNHARCO DHT550 COMPUTERIZED MEASURINGTOPSAW-BUTT SAW-FORESTRY CAB and 8,540 hours Price : 65,000 USD - Item ID11888 - Daren 800-315-9950 x603 1998 Tigercat 240 Tracked Loader - 9550 Hours. 32’ Reach. Rotobec continuous grapple. Strong Machine. Works well. New Cummins 6BT engine in last 500 hours. Cab riser for high stacking. Clean cab with AC. Item ID-12242 - Tom 800-315-9950 or 615-3491890 x604 1999 BELL TF120B Feller Bunchers - one owner machine, it is on D5 cat tracks, Hours not known; meter not working. Price: 60,000 USD - Item ID-11480 - Daren 800-315-9950 x603 1999 CAT 330 with Bucket & Thumb Estimated 4500 hours. 40% undercarriage. Final Drives and Drive Motors just replaced. For Classifieds Call Your LBX REP at 1-800-315-9950

The Original Lumberman’s Exchange n 17


For Firewood Production - Take Your Pick

The Dyna

SC-14 SC-16 or

Both Give you High Production in an Affordable and Profitable Processor The SC-14 (pictured) Offers

• Low Initial Investment • Powerful Hydraulic Operation • Flexible Power Options – PTO, Gas or Diesel • Large 12’ x 14” (18” Max) Log size • Easy to Operate Controls • Pull with any pickup! • Sets up Fast! • Production from 1.5 – 3 full cord per hour!*

Packed and ready to go!

*Production rate may vary based upon log size, quality, power source used and operator skill.

toll free: 1.888.820.3962 local: 231.734.4433 fax: 231.734.3681 6228 60th Avenue, Evart, MI 49631

12 Years of Building Quality Machines!

Call the Dealer Nearest You!

DYNA Portable Sawmills

18 n

September 2011

Shell Forest Products, Harrodsburg, KY

Marty Shell 859.325.3694

Great Lakes Firewood, Twin Lake, MI

Dennis Blankenship 231.206.4073

Sensenig Repair, Mio, MI

Dennis Sensenig 989.848.8346

Warrick Hallet Carpentry, Glencoe, MN

Warrick Hallet 320.864.4340

PDG Sales, Medina, NY SC-16 Demo Model Available

Philip Graber 585.798.2969

North Country Hydraulics, Potsdam, NY

Ben Deschaine 315.842.0388

Riehl’s Sawmill Sales, Lykens, PA

Amos Riehl 717.365.3852

Lickity Split Firewood Equip., Stetsonville, WI

Clayton Szydel 715.550.1077

Timberline Landscape, Davis, WV

Bill Mollard 304.940.0749

Visit us online at www.LBXonline.com!


Turn logs into lumber 8 sawmill models to choose from

Dynamite

DEALS

Now Thru Oct 31, 2011

Call for details

800.553.0182

SawLumber.com 42” Bucket with Fixed Thumb and Stump Ripper. S/N 6BR03006. Some cosmetic damage. Engine runs good. Cab clean with working AC and heat. - Item ID-12250 Tom 800-315-9950 or 615-3491890 x604 1999 CBI Model 4800 Grinder 1680 Hours: Twin Disc Clutch; Flex reversible fan, Remote control, Weight 93,000 lbs., Tires 445/65R22.5, New teeth, Updated hammers, Full engine service just completed; Cat 3412 engine w/12 cylinders; Ready to go to work; Very good condition - Item ID-12047 - Tom 800-3159950 or 615-349-1890 x604 1999 Hydro-Ax 611 EX Cummins (Recon) DR1477RX SN: 60301916 HP: 215 CYLINDERS: 6 HOURS on new engine: 7613 total hours, AIR CONDITIONING, PAINT: Fair, BODY: Good GLASS: Fair, tire size 67 x 34-26 CONDITION: All good, Hydro-Ac side cut head. - Item ID-12195 - Daren 800-315-9950 x603 1999 Prentice 410E Loader

with CTR Delimber - 5166 hours, The paint is in fair condition all around, The glass inside the cab is missing from the sliding glass window, and also the glass in the door is cracked. The interior is in poor condition, the majority of the problem being the windows. - Item ID-12191 Daren 800-315-9950 x603 1999 Prentice 620 Harvester - Ponsse processing head; New undercarriage; Engine replaced 1000 hours ago. Very strong machine. Good value. Quebec, Canada - Item ID12134 - Tom 800-315-9950 or 615-349-1890 x604 1999 Tigercat 720B Feller Buncher - 5600 actual hours, Machine has new (crate) engine from Cummins with Machine has new (crate) engine from Cummins with 1293 hours on it. Very good running machine. All Pins & Bushings Tight. Machine operated very well. A/C very cold. Machine is in Alabama Item ID-12181 - Daren 800-3159950 x603

2000 Sterling Road Truck/ Tractor Item ID: 12323 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

1999 Valmet 603 Three Wheeled Feller Buncher 8500 hours. Hard to find. Has 18” Koehring Saw Head. New (Recon 4BT Cummins) just put in. Has warranty; 23.1X26 Front Tires; 1 Pair Double Diamond Tire Chains; Heat and AC. Tires at 50%. Runs well. Great for thinning or cutting in tight quarters. Stingy on fuel....less than 5 GPH! - Item ID-12290 - Tom

For Classifieds Call Your LBX REP at 1-800-315-9950

1988 JD 548D Grapple Skidder

Item ID: 12209 Contact: Daren/Michelle 800.315.9950 Ext. 603

www.LBXonline.com 800-315-9950 or 615-349-1890 x604 2000 Daewoo with Denharco DM3500 stroke delimber bank repo an is open to offers - Item ID-12026 - Daren 800315-9950 x603 2001 CAT D5H TSK II - 8,102 hours, Cab with A/C, Six Way Blade, Fixed Esco 120” Grapple w/Winch, U/C 85%, rebuilt transmission - Item ID-12083 - Daren 800-315-9950 x603 2001 metavic forwarder

The Original Lumberman’s Exchange n 19


‘10 Woodmizer LT-70 Sawmill

Ingersol Rand Air Dryer

*

Brewco Cant-sizer

*

John Deere 724J Wheel Ldr Montgomery Horiz Wood Hog

*

*

Progress Vibrating Conv/Screen Quality Machine Horiz Resaw Baker 4-Hd Resaw w/Return

Contact Jim at (770) 704-7918

Call Eric Doss (706.324.2604 x307) or Jim Lichucki (770.704.7918)

Expertly sold

—by a company you can depend on!

800-241-8983

706-324-2604 • Fax 706-324-0047

www.benjones.com • email: sales@benjones.com • Financing Available

2008 Timbco/ Valmet 445FXL w/ Quadco 22” saw head Low hours. Great Price! Item ID: 12119 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

model 1400 loader - 13hp honda, winch,4 sets of bunks, float tires, runs/works good, no elect start and steps are bent. Can Haul approx. 1 1/2 cords of wood at a time. 18” of ground clearance, Bunks are 4’ tall Model 1400, Boom length: 14’, total height 84”, total width 48”, boom rotation 270 deg., Brapple rotation: 20 n

September 2011

Clark 664D Cable Skidder Item ID: 12221 Contact: Daren/Michelle 800.315.9950 Ext. 603

www.LBXonline.com Continuous, lift capacity: 2000lbs, total weight 3225lbs. - Item ID-12192 - Daren 800315-9950 x603 2001 Prentice 384 Knuckleboom Log Loader Cummins 6BT 5.9L engine, joystick control, enclosed cab, delimber, saw package hook ups. - Item ID-12212 Daren 800-315-9950 x603 2001 Rebuilt Keto Processing Head Model C8T020 - 2001

Keto 800 series processing head totally rebuilt less than 1000 hours ago. Customer must sell. Good condition. Missing some computer components. - Item ID-12230 - Tom 800-315-9950 or 615-3491890 x604 2001 Timbco 445D with Quadco Sawhead - 10,560 hours. Runs good. Undercarriage 50%. 540 degree non continuous rotation on upper. Quadco 22” saw with continuous rotation. - Item ID-12288 - Tom 800-3159950 or 615-349-1890 x604 2002 John Deere 435 Knuckleboom Log Loader - 2002 John Deere 435 Knuckleboom Log Loader, Joystick control, saw package hookups, delimber. - Item ID12215 - Daren 800-315-9950 x603 2002 John Deere 648G III TC Grapple Skidder - Dual arch, Torque converters, winch, 30.5-32 tires - Item ID-12293 Daren 800-315-9950 x603

2002 John Deere 648GIII Dual Function Grapple Skidder - 9700 total hours, 3000 on Reman. engine, Reman. transmission 6000 hrs. 30.5x32 tires at 60%. MAchine is working daily. - Item ID12231 - Daren 800-315-9950 x603 2002 Timberjack 608s with hot saw - approx. 6000 hours, Machine is in very good shape and has been well maintained. - Item ID-12194 Daren 800-315-9950 x603 2003 Cat 525B S/A Skidder Good condition. 10,500 hours. New Transmission. Recent work done. Runs well. CA - Item ID-12189 - Tom 800-3159950 or 615-349-1890 x604 2003 Fabtek 344B Forwarder 9800 hours, tires 70%, extenda boom, two sets of chains. Very good condition. - Item ID-12247 - Tom 800-315-9950 or 615-349-1890 x604 2003 Morgan 2 Saw Trimsaw machine was bought new and never was really used, less

Visit us online at www.LBXonline.com!


CARDINAL WIRELESS, Inc. 5775 Park Plaza Ct. Indianapolis, IN 46220 317 577 9944 www.cardinal-wireless.com

FREE shipping for minimum 3 units

GPS TRACKING

TWo-WAy RADIoS

for Truck Fleets

Up to fifteen miles of loud, clear range and NO airtime charges.

Beaver Model 18

ASSET TRACKING

GATEGUARD®

Remote Gate Control and Radio Communication

Comin gS 4 New oon Mode ls

for Construction Equipment, Generators, Trailers and Rental Equipment

HEADSETS

for Hearing Protection

Call today for more information:

800-332-3268

www.cardinal-wireless.com than 50 hours if that, machine has never been painted it wwas just not used. Price : 9,000 USD - Item ID-11904 Daren 800-315-9950 x603 2003 TimberPro Model TS 620 Six-Wheeled Grapple Skidder - 4990 hours, Cummins motor, 6WD. Has 400 hours on rebuilt engine, New ECM; New drive pump; New tires. Excellent condition; Great Value. Perfect for long hauls or handling big loads. Rear bogey tracks included. - Item ID-12254 - Tom 800-315-9950 or 615-349-1890 x604 2004 72” CSI R72 Circle Saw Year model 2004, hydraulic. 20’ deck. Sold without the blade. New blade is additional $3500. Was over $40,000 new, 2 years ago. machine needs a new blade, 1500 hrs, it was used to cut logs Price : 17,000 USD - Item ID-12125 - Daren 800-315-9950 x603 2004 Barko 395 on SP Carrier - Very Clean Machine. 8800 hours. Mounted on Big John Self Propelled Carrier. JD 6.9

Powertech Engine. Rotobec 4547 Grapple. 35’ Reach with heel bar. Comfort Cab with Heat/AC/Stereo. Nice yard machine. - Item ID-12278 Tom 800-315-9950 or 615-3491890 x604 2004 Cat 525B Grapple Skidder - Single arch grapple, winch, 30.5-32 tires - Item ID12296 - Daren 800-315-9950 x603 2004 DEERE 648G III - 1420 hrs, 50% on tires, Pins are tight - Item ID-12030 - Daren 800-315-9950 x603 2004 Hood 28000 Loader with hotsaw - Year model 2004; 72” hot saw; only 340 hours. Item ID-11418 - Daren 800-3159950 x603 2004 JD 648GIII Single Arch Grapple Skidder - Well maintained; 8200 hours engine rebuilt at 7100 hours; Price reduced to allow for new tires for buyer; Pulls strong. Motivated Seller - Item ID-12067 - Tom 800-315-9950 or 615-349-1890 x604 2004 JD/Timberjack 608S w/

1998 CAT 525 Grapple Skidder Item ID: 12295 Contact: Daren/Michelle 800.315.9950 Ext. 603 www.LBXonline.com

Waratah 622 processing head - 6809 Hours. One owner. Rebuilt undercarriage, now at 50%. Waratah 622 can have top saw added. Good condition. Forestry Package. Serial numbers available for both machine and head. LA - Item ID-12161 - Tom 800-3159950 or 615-349-1890 x604 2004 Prentice 384 TMS Loader Package - 10,145 Hours; CTR

For Classifieds Call Your LBX REP at 1-800-315-9950

2001 Timbco 445D w/Quadco Sawhead Item ID: 12288 Contact: Tom  Ph: 800-315-9950 x604

www.LBXonline.com 450 Delimber; John Deere engine. Runs good. Working on job today. Good condition. TN - Item ID-12171 - Tom 800315-9950 or 615-349-1890 x604 2004 Timberking 560 Knuckleboom Log Loader Joystick control, saw package hookups, CTR delimber. Cat engine - Item ID-12294 - Daren 800-315-9950 x603 2004 Valmet 425 Ex-10

The Original Lumberman’s Exchange n 21


n uctio e d o r anc est P High t Mainten !! s d! Lowe rantee Gua

Trailer:

Tandem axle, 8’6” wide, 22’-30’ long, 11’8” high, 5-7 tons, Electric brakes.

Saw:

Superior Carbide Slasher - Cut wood instead of sharpen chains 36” to 60” diameter, 2 ga Carbide Slasher.

Engine:

50 to170 HP or PTO Drive with user’s tractor.

Hydraulics:

Commercial Shearing

Splitter:

35 - 72 tons, 3-5 second cycle time; 2, 4, 6, 8, 10, 12, 14 & 21 way pkg wedge. Capacity - 4” to 27” Log diameter 0” to 48” Block Length Lifetime warranty on the entire splitter chamber.

Infeed Conveyor:

16” - 30” long Hydraulic powered.

Clean out Hopper: Get rid of bark and wood slivers before being conveyed away.

New Grapple System Now Available!

2040 Rogers Road, Perth, O n ta r i o K 7 H 1 P 9 Canada

www.cord-master.com Email: cordking@cord-master.com

Today!

888-219-9663


Harvester - 4700 hours: Timbco self leveling carrier with Cat D6 side frames; Long reach harvesting boom of 35’; Valmet 360 harvesting head is fast and efficient; Well maintained with service history. - Item ID-12074 - Tom 800-315-9950 or 615-349-1890 x604 2005 Dynamic 565 Chipper (Factory Rebuilt) - CH5655023, 790 hr, low wear, 260 hp Cummins QSC (260 hp rated, 280 hp peak). 2005 Year Model. Refurbished – meaning factory checked all wear components and bearings, and made sure everything worked. Anything needing replacement or repair was replaced or repaired. Previous owner was chipping short logs in his woodyard, near Washington DC. Traded up. Was using it regularly up to time of trade. Warranty: Drum 1 yr (against failures due to faulty workmanship or materials). Machine: 3

mos parts & labor (OR 2 mos parts & labor followed by 2 mos parts only). Engine: No mfr engine warranty available - Item ID-12270 - Tom 800-3159950 or 615-349-1890 x604 2005 Prentice Model 410E w/ TMS Package - 2730 Hours; 52” Grapple; CTR Model 450 Pull Through Delimber; Prentice TMS System with III Series Trailer; Very good condition. Well Maintained. KY - Item ID-12079 - Tom 800315-9950 or 615-349-1890 x604 2005 Valmet 860.1 8-Wheeled Forwarder - 10,900 hours. New hydraulic transmission. Good condition. Sisu engine uses 4 gal/hour. 16 ton capacity. Tracks for front and back. Blade on front and hood guard. - Item ID-12267 - Tom 800-315-9950 or 615-349-1890 x604 2005 Valmet 941 Harvester with 370.2 Head - The largest of rubber tired harvesters. 15,000 hours, very well maintained and working

1991 JD 548D Grapple Skidder

2007 CAT 325D w/624 Waratah Proc. Head

Item ID: 12208 Contact: Daren/Michelle 800.315.9950 Ext. 603 www.LBXonline.com

today. Very good condition. Long reach, leveling cab, and tracks for front bogeys make this a great value. - Item ID12265 - Tom 800-315-9950 or 615-349-1890 x604 2005 Valmet/Timbco 415 Harvester with 370E Head Very nice unit. 6900 hours. 370E Harvesting head just added 18 months ago and only has 1500 hours. 36” Triple Grouser tracks. Sisu

Item ID: 12283 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

engine that is very stingy on fuel. 8’ squirt at end of boom for 30’ reach. Reversible fan and auxiliary oil cooler. - Item ID-12266 - Tom 800-315-9950 or 615-349-1890 x604 2006 Barko 495 Crawler Loader - 48” Hydraulic Cab Riser; 32’ reach; Totally gone through with new pins

Our New Shaving Mills Give You

at an

Big Production Affordable Price!

Our New Shaving Mills Give You Big Production at an Affordable Price! • Your choice of 5' or 8' models

• Your choice of or 8' models • Powered by5'hydraulic ram-type system • Powered by hydraulic ram-type system • Features two or three 42" long dynamically balanced heads w/8 knives per head

• Features two or three 42" long dynamically balanced heads • Heads are per in constant production, regardless of with 8-knives head box travel direction

• Heads are8"indiameter constanthead production, regardless ofhp box travel • Each is powered by a 50 direction electric motor • Each 8" diameter head powered by a yards 50 hp per electric motor • HIGH production —isUp to 50 cubic hour!

• High production – Up to 50 cubic yards per hour!

Expertly built Expertly and sold by a sold Equipment —by a company youdepend can depend company you can on.on!

Call Eric(ext. Doss307) (x307) or Jim Lichucki 770.704.7918 Call Eric Doss

800-241-8983

800-241-8983 706-324-2604 • Fax 706-324-0047

Industry’s Most Trusted Source

706-324-2604 •

FAX

706-324-0047

www.benjones.com • email: sales@benjones.com • Financing Available www.benjones.com • e-mail: sales@benjones.com • Financing Available For Classifieds Call Your LBX REP at 1-800-315-9950

The Original Lumberman’s Exchange n 23


Below Cost!

2006 Timber Wolf Firewood Processor w/26’ Conveyor

Item ID: 12020 Contact: Daren/Michelle    800.315.9950 Ext. 603 www.LBXonline.com

bushings and engine service. 9463 hours. Undercarriage is 90% with 28” pads. Has delimber and bar saw slasher hydraulics. - Item ID-12102 - Tom 800-315-9950 or 615-3491890 x604 2006 Cat D5N - Very nice and strong dozer. 2475 hours. Root Rake. Hydrualics in rear

24 n

September 2011

NEW! 2010

Saukville Tractor Item ID: 12300 Contact: Tom   800.315.9950 Ext. 604 www.LBXonline.com

for optional attachments with cab controls. Comfort cab with Air/Heat/Stereo. Tracks at 60%. One owner. Well maintained. - Item ID-12287 - Tom 800-315-9950 or 615-3491890 x604 2006 GT25 Gyro Trac Refurbished undercarriage at 80% with new tracks and new set of cutter teeth, this

machine is work-ready. 773 hours on Cummins 230HP diesel, overall good condition. Pressurized cab, winch, ROPS. - Item ID-12268 - Tom 800-315-9950 or 615-349-1890 x604 2006 JD 2554 Harvester with Waratah 624 Processing Head - 6800 hours + possible 1500 when hour meter was broken; Waratah 624 Harvesting Head. Undercarriage at 25%. Great for both in woods harvesting or deck processing. On board computer working well. Good condition. Motivated Seller! Well below market price. LA. - Item ID-12087 - Tom 800-3159950 or 615-349-1890 x604 2006 JD 700J Dozer with Winch - Very clean dozer with winch and low hours of 1869. Enclosed cab with comfort package. Runs strong and is priced to sell. Excellent value and worth a look. NC - Item ID-12101 - Tom 800-315-9950 or 615-349-1890 x604 2006 JD 700J XLT Dozer - 1075

Hours. Excellent condition. Very well maintained. Comfort cab with air and stereo. Work light package. Undercarriage at 90%. - Item ID-12073 - Tom 800-315-9950 or 615-349-1890 x604 2006 JD 748GIII Dual Arch Skidder - Approx 8400 hours; Very well maintained; 30.5 tires at 40%; Sweda axles; Winch. Unit working everyday. - Item ID-12117 Tom 800-315-9950 or 615-3491890 x604 2006 Morbark Hurricane 18 w/Loader - 275 HP JD engine. Very clean chipper. Runs very well. 1190 hours. Easy to transport. Great value! - Item ID-12241 - Tom 800-315-9950 or 615-349-1890 x604 2006 PRENTICE 384 mounted on a Mack Truck - 4600 hours, has been on a yard since 2006 Price : 80,000 USD - Item ID12008 - Daren 800-315-9950 x603 2007 Cat 325D w 624 Waratah Processing Head - 7800 hours.

Visit us online at www.LBXonline.com!


Very clean machine. Head updated. Unit is working today. 34” Triple Grouser Pads. Great landing machine. - Item ID-12283 - Tom 800-3159950 or 615-349-1890 x604 2007 JD 643J Feller Buncher w/Bunching Hot Saw - Very Clean Unit with 7921 hours. Original owner with excellent maintenance records. Tires at 70%. John Deere bunching head recently rebuilt - Item ID-12279 - Tom 800-315-9950 or 615-349-1890 x604 2007 John Deere 335C Loader - 2000 hrs, comes with a NEW CTR Reversable Bucksaw. Item ID-12234 - Daren 800-3159950 x603 2007 K2 model 940 Forwarder - s/n 070501. 9 Ton capacity. 1950 hours. Excellent condition. Tires at 80%. Priced to sell. Spare parts still readily available. FOB WS - Item ID-12271 - Tom 800-3159950 or 615-349-1890 x604 2007 Lamtrac Model LTR6125 Mulcher - NEW TRACK MULCHER W/ MAGNUM HEAD

& WARN WINCH, 14 hours. The multipurpose LTR6125 offers the possibility to install an array of attachments to fit all your needs. Easily changing from a Mulcher to a Brush Cutter, Root Rake, or Dozer Blade, the LTR 6125 can get the job done quickly and efficiently without the hassle of having 4 machines to do one job... the LTR6125 does it all! Complete MFG Warranty included. - Item ID-12166 Tom 800-315-9950 or 615-3491890 x604 2007 Tigercat 630C Skidder Very clean unit. S/N 6302559. Tires at 60%. 6519 hours. Big capacity grapple. Tight and ready to work. - Item ID-12275 - Tom 800-315-9950 or 615-3491890 x604 2007 Tigercat M760 Mulcher - 4600 Hours. In use today. Cat C13 TAAC Tier III engine. 415 HP. Equipped with FAE mulching Head model 500/ U225C. Excellent condition. Rebuilt engine, replaced FAE rotor, replaced FAE head,

Motivated Seller - Ready to Work -

48” Precision Chip Pack w/90’ vibrating conveyor Item ID: 12128 Contact: Daren/Michelle 800.315.9950 Ext. 603

www.LBXonline.com new starter and batteries installed in 2009. INCLUDES: Spare Components - Radiator, fan controller computer, 12 blade fan, hydraulic, engine oil, and air filters, FAE teethapprox. 30; FAE bolts-approx. 50; nordlock washers for FAE, FAE tool-holders, FAE

‘04 Timbco 425EXL w/22” Quadco Spotless! One Owner! Item ID: 12284 Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com drive belts, owner’s manuals, service manual, parts manual, C13 engine manual - Item ID12132 - Tom 800-315-9950 or 615-349-1890 x604 2008 ASV Posi Track RC100 skidsteer - NEW - Item ID11859 - Daren 800-315-9950

Reconditioned Electrical Equipment Saves You Money, Big Money! VFD Control

We Buy, Sell, or Rent— Used, Obsolete and Hard to Find Industrial Electrical Equipment

Many Items In Stock Ready for Immediate Shipment!

• Standard 404 Pitch Saw Chain, with 3/8 Kerf

Automatic Reduced Voltage Starter

• Automatic Chain Oiler • UL Approved, Wired to NEMA Standards

All Sizes of Motors

Manual Transfer Switch

Combination Starter

When you need it Now— And at the Best Price! You Need Weaver Electric Motor Control Starters (Solid State)

Disconnect Switch

Call Today!

Toll Free 800-257-0038

Ph: 303-288-0746 • Fax: 303-288-0218 6591 N. Washington, Denver, CO 80229 Web: www.weaverelec.com Email: spark@weaverelec.com

We also offer the following: Spare Sawbar (all types) and Repair Center for All Used Bars Saw Chain Loops or Reels • Chain Take-up assemblies

Sering Sawmill Machinery Co., Inc.

(360) 687-2667 Phone • (360) 687-2917 Fax

For Classifieds Call Your LBX REP at 1-800-315-9950

seringmfg@aol.com

The Original Lumberman’s Exchange n 25


26 n

September 2011

Visit us online at www.LBXonline.com!


x603 2008 NEW Lamtrac Model 8290Q Mulcher/Right of Way Clearing Machine - New 2008 w/15 demo hours and FULL FACTORY WARRANTY. Cummins QSC 8.3 Tier III 290HP; Rexroth Hydraulics; Berco undercarriage; Weight - 36,000 lbs (with head); 3.7psi ground pressure ROPS/ FOPS/OPS certified cab with premium comfort package. Its ingenious four track, double articulated design enhances maneuverability while maximizing traction. Goes ANYWHERE! Best in class! TX - Item ID-12146 - Tom 800-3159950 or 615-349-1890 x604 2008 Prentice 2764 w/ Rotary Axe Brush Cutter Super clean machine with only 1480 hours. Excellent condition. Great right of way maintenance machine. Comes with optional Prentice Hot Saw for tree felling. Customer must sell. - Item ID-12239 Tom 800-315-9950 or 615-3491890 x604 2008 Terex PT100 Skid Steer with Mulcher & Bucket - Customer never used. Only 38 hours. Complete package: Brush bucket with hold down arms, Forks, and Tushogg HD Mulcher. New condition. Nothing more to say. Fantastic value. Located near San Antonio, TX - Item ID-12188 - Tom 800-315-9950 or 615-349-1890 x604 2008 Timbco/Valmet 445FXL with Quadco 22” Saw Head - Latest Model of Tracked Feller Buncher from Valmet with Heavier Komatsu undercarriage. 3200 hours. Excellent condition. 28” double grousers. Leveling cab. 360 degree rotator on Quadco saw head gives great flexibility in production. Customer selling due to job changes. Great value! - Item ID-12119 - Tom 800-315-9950 or 615-349-1890 x604 2008 Valmet 890.3 20 Ton Forwarder - 4800 Hours. Excellent Conditon. 8-wheeled with Eco Tracks for all bogeys. Best Price on Market! Customer ready to sell. Tires

Morbark 58 Chipper

Item ID: 12082 Contact: Daren/Michelle 800.315.9950 Ext. 603

www.LBXonline.com

at 60%. Sisu Engine uses about 4 GPH! Front Blade. Hood Guard. One owner machine who took great care. - Item ID-12263 - Tom 800-3159950 or 615-349-1890 x604 2009 NEW DOPPSTADT DW3060K BUFFALO Low Speed Shredder - Only 100 demo hours. Customer must sell below dealer cost. This low speed shredder is the top of the line in the industry. Great for reducing railroad ties, pallets, stumps, or other wood debris into useable biomass or fuel. Very low fuel consumption. Pays for itself over time. Worth a close look and avoid regular pricing! - Item ID-12248 - Tom 800-3159950 or 615-349-1890 x604 2009 Tigercat E620C Grapple Skidder - Less than 1900

hours; 44” high flotation tires; Excellent condition; Seller shut down job; Save thousands over new 2011 unit. Hydrostatic drive; Strongest center section in market. You won’t find Tigercat skidders like this on the market! - Item ID-12106 - Tom 800-315-9950 or 615-3491890 x604 2010 JD 748H Grapple Skidder - Like New Condition. 2100 hours. 30.5 x 32 Tires at 80%. Loaded. Customer lost contract. Save big over new machine purchase. - Item ID12282 - Tom 800-315-9950 or 615-349-1890 x604 2011 JD Model 748H Dual Arch Skidder - 30.5 x 32 Tires. 600 Hours. Job shut down after buying skidder new in Jan. Save 10% off new and pay

For Classifieds Call Your LBX REP at 1-800-315-9950

no sales tax! - Item ID-12262 - Tom 800-315-9950 or 615-3491890 x604 225A Timberjack Skidder - In ready to work condition. 1986 year model with a 353 Detroit engine. - Item ID-11991 - Daren 800-315-9950 x603 510 International Wheel Loader - Please call for information. Photos coming soon. - Item ID-11990 - Daren 800-315-9950 x603 Barko Knuckleboom - 2006, Model 495 Trailer Mounted , 3800 Hours , FEC Log Pro Buck Saw Included . Like new one owner machine! - Item ID12153 - Tom 800-315-9950 or 615-349-1890 x604 BMandM Triple Screener 10x14 - screen sizes: 2”, ¼” and 1/8”, This screen is still in operation and will be

The Original Lumberman’s Exchange n 27


BANDSAW BLADES

We have the most popular sizes in stock & ready to ship from major manufacturers, including…

We also offer expert Sharpening Services, plus…

Gang • Edger • Scragg Trim • Split • Strob …and

just about any Custom Saws you need to keep you cutting longer… for less!

Welded to your lengths! Call Marvin Miller for a quote 231-924-5953 • (fax) 231-924-6166 • 11606 Brickyard Rd. • Holton, MI 49425

Motivated Seller

Williams 200hp Hammermill Grinder 350 Hog Item ID: 12011 Contact: Daren/Michelle 800.315.9950 Ext. 603

Priced to Sell!!

NEW! 2010 Puma 18GM Firewood Proc. One of 3 available at cost! Item ID: 12299 Contact: Tom 800.315.9950 Ext. 604

‘99 Prentice 410E Loader

1999 Timberjack 735 Shovel Logger

Item ID: 12191 Contact: Daren/Michelle 800.315.9950 Ext. 603

Item ID: 12311 Contact: Tom 800.315.9950 Ext. 604

w/CTR Delimber

www.LBXonline.com

www.LBXonline.com

www.LBXonline.com

removed in April of 2011. Item ID-12205 - Daren 800-3159950 x603 Mid 70’s Fork Lift 580 Case, High Lift, Good Condition Price : 3,000 USD - Item ID11493 - Daren 800-315-9950 x603 Cat 518 Grapple/winch Skidder - Late 80’s 4WD Drive; Cat winch, maintained machine.; 30.5 x 32 Tires, 95% rubber. 130-hp, all pins are good. - Item ID-12202 - Daren 800-315-9950 x603 Cat D5M XL Dozer - With EROPS, sweeps and screens. 50,000 pound W5C winch. 3490 hours. New factory log arch. Very clean and straight machine. - Item ID-12264 Daren 800-315-9950 x603 1993 Caterpillar D4H Dozer 1903 Hours - S/N 8J00374, PAT Blade, Laser Attachment, Winch, Cat 3304 Engine. Excellent Condition! - Item ID-

12177 - Tom 800-315-9950 or 615-349-1890 x604 Caterpillar D6R - Caterpillar D6R s/n 5LN00696 Price : 75,500 USD - Item ID-11906 Daren 800-315-9950 x603 Clark 664D Cable Skidder - 5 cylinder 88hp deutz engine, newly rebuilt transmission, new head gaskets, new injectors, new mainline. - Item ID-12221 - Daren 800-315-9950 x603 Deere 335 - 2006, Model 335, 5500 Hours, CTR 426 Delimber, Very good condition, one owner machine. - Item ID-12175 Tom 800-315-9950 or 615-3491890 x604 1987 Eagerbeaver 20 Ton Trailer, Tandem Axle, Dual Wheels, 8.25R15 Tires Good, Manual Fold Down Ramps, Very Good Condition! - Item ID-12179 - Tom 800-315-9950 or 615-349-1890 x604

Early 90’s Case 850B - Early 90’s Case 850B, U/C 60%, 3500 hours, Good Drive motors, EROPS, ready to work!!!! - Item ID-12297 - Daren 800-315-9950 x603 Franklin Skidder - 2003, Model Q70 - M31A,Enclosed Cab W/ Heat & A/C,28Lx26 Tires 85% Rear,70% Front , 100 Hours On Dealer Rebuilt Transmission, 600 Hours On Cummins Recon Engine 6BTA 200 H.P. Excellent one owner machine! - Item ID-12152 - Tom 800-3159950 or 615-349-1890 x604 Gyro Trac GT25 - Machine has 1278 hours. - Item ID-11801 Daren 800-315-9950 x603 Hood 7000 - 22’ boom, by-pass grapple, tandem pump, side mount tank - Item ID-12291 Daren 800-315-9950 x603 John Deere 240 - Skid Loader 52HP 1785 Hours. Excellent Condition. 12x16.5 Tires 75% More Details Soon. THANKS

28 n

September 2011

www.LBXonline.com

FOR LOOKING. Price : 13,900 USD - Item ID-11799 - Daren 800-315-9950 x603 John Deere 540B Cable Skidder 23.1-26 tires. - Item ID-12210 - Daren 800-315-9950 x603 John Deere 640E Skidder 1993 year model, 6 cylinder, powershift transmission, no leaks - Item ID-11989 - Daren 800-315-9950 x603 John Deere 648D Skidder Has new hydraulic pumps, has winch, runs great, 8332 hours. - Item ID-11711 - Daren 800-315-9950 x603 Mack Truck $48,500 - 1998, Model DM Mack Truck, 300 HP Mack Engine; 330,000 miles; 7 Speed Transmission, 46K Rear, 20K Front, Tri -Axle, 22.5 Tires, Like New Log Bed, Truck is in very good condition! Plumbed to take pup trailer. Very well maintained. - Item ID-12178

Visit us online at www.LBXonline.com!


Heavy Duty Forks At Big Savings 1-1/2” thick x 10” wide x 48” long . . . . . . . . . . . . . . . . . . . . . . . . $2,600.00 pair 2” thick x 6” wide x 48” long . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $835.00 pair 2-1/2” thick x 6” wide x 48” long (Surplus) . . . . . . . . . . . . . . . . . . $1,100.00 pair 2-1/2” thick x 6” wide x 48” long . . . . . . . . . . . . . . . . . . . . . . . . . $1,205.00 pair 2-1/2” thick x 6” wide x 60” long . . . . . . . . . . . . . . . . . . . . . . . . . $1,365.00 pair 2-3/4” thick x 6” wide x 72” long . . . . . . . . . . . . . . . . . . . . . . . . $2,500.00 pair 3” thick x 7” wide x 60” long . . . . . . . . . . . . . . . . . . . . . . . $2,495.00 pair 3” thick x 7” wide x 72” long . . . . . . . . . . . . . . . . . . . . $2,825.00 pair 3” thick x 7” wide x 96” long . . . . . . . . . . . . . . . . . $3,530.00 pair

2004 Tigercat 822 Tracked Buncher Item ID: 12298 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

■ In Stock ■ Same Day Shipment ■ Let Us Quote Your

Special Design Forks. Very Competitive Pricing.

Above forks have capacities from 12,000 lbs. to 30,000 lbs. per pair. 3-1/2” thick x 8” wide x 60” long . . . . . . . $3,595.00 pair 3-1/2” thick x 8” wide x 72” long . . . . . . . $3,990.00 pair 3-1/2” thick x 8” wide x 96” long . . . . . . . $5,025.00 pair Also, 4”, 5”, 6” thick forks to 168” long.

Made from one piece of steel - not welded. Quality recognized world wide.

‘05 JD 648GIII Dual Arch Grapple Skidder Item ID: 12330 Contact: Daren/Michelle 800.315.9950 Ext. 603 www.LBXonline.com

1994 CAT 518C Grapple Skidder Item ID: 12302 Contact: Daren/Michelle 800.315.9950 Ext. 603

www.LBXonline.com - Tom 800-315-9950 or 615-3491890 x604 MODEL 1300 SELF CONTAINED TUB GRINDER - MODEL 1300 SELF CONTAINED TUB GRINDER, CAT DIESEL ENGINE, READY TO WORK, CAB W/ A/C - Item ID-11792 - Daren 800-315-9950

Bay Equipment Co. / (616) 392-1811 P.O. Box 1919 / Holland, Mich. 49422 • Fax (616) 392-6238

email: bay.eq.co@gmail.com • www.bayequipmentco.com x603 Morbark 290 Wood Chipper - everything done and ready for spring , great machine for landscaper or a second back up machine for a small tree company, chipper has always started and chipped, extra sharpened blades ....it has a cummins diesel engine, 88 horse power, has new tires and brakes Price: 6,750 USD Item ID-11897 - Daren 800-3159950 x603 Morbark 58” Chip-pack Recent shaker package, 200 hp motor, Chip blower, Vibrating conveyor - Item ID12292 - Daren 800-315-9950 x603 Peterbilt Truck - 2000, Peterbilt Truck, Sleeper, Good running condition. - Item ID12176 - Tom 800-315-9950 or 615-349-1890 x604 Prentice 210D - 1995, Mounted On A Prentice Articulated Self Propelled Carrier, S/N 210P52736, Prentice C742 Grapple, Lever Controls, 6059 Deere Engine. Working daily,good dependable

machine. - Item ID-12174 Tom 800-315-9950 or 615-3491890 x604 Prentice 490 - 2006, Model 490, Dual Arch Grapple Skidder, 8000 Hours, 30.5x32 Tires Approx. 50%, Less than 500 hours on dealer rebuilt engine. One owner machine. - Item ID-12172 - Tom 800-3159950 or 615-349-1890 x604 Tigercat 860 Stroke Delimber - 1999 year model bought new in 2001. Excellent condition and ready to work. Delimber is a Denharco DM3500. Machine is a one owner, one operator machine. - Item ID11886 - Daren 800-315-9950 x603 Timbco Fellerbuncher - 2000, Model 425D, 8.3 Cummins Engine , approx. 7400 hours,U.C. Like New , Timbco Bar Saw W/40 Degree Rotate with less than 500 hours on it, Leveling System And Swing System Tight. Very Good Machine , Can Be Seen Working! - Item ID-12155 - Tom 800-315-9950 or 615-349-1890 x604

For Classifieds Call Your LBX REP at 1-800-315-9950

Trim All “All in One” Trim Saw Attachment - Order through Lumberman’s Exchange at great prices. This attachment can replace the bucket on a skid steer, loader/backhoe, or farm loader and turn it into a trimming saw at a fraction of the cost of large trimming machines. Reach from 23’ to 75’ depending on model. 3 models to choose from. Optional rotating saw and swing out arm for maximum flexibility and greatest performance. Clear power lines, dead limbs, or widen right of ways with 24” saw blade with carbide tips. - Item ID-12105 - Tom 800-315-9950 or 615-349-1890 x604 WANTED: Older Clark Cable or Grapple Skidders still running - If you have an older Clark Cable or Grapple Skidder that you would like to sell, please call to discuss. Prefer Cable Units of any size. - Item ID-12151 - Tom 800-3159950 or 615-349-1890 x604

LOG TURNERS

Log deck headframe with

The Original Lumberman’s Exchange n 29


PIPER’S Saw Shop 1995

5 7 0 6 • 5 4 8 800 • Promotional Pricing Offer

Simonds Red Streak Hard Back 1-1/4” x .042 x 3/4” or 7/8” Length 13’2”

$14.71 $14.27 each Tell us you saw it here!

L im it e d T im e O n ly

1995

1997

Mellott chain turner. - Deck is intended for a RH mill. Chain spacing as viewed from carriage Right to Left: 0”-60”-118”. Turner is at 45”. Stop & Loader and deck drive shaft are 2-7/16”. Gearmotor is 3 HP (3 phase) with #100 Roller chain drive. Unit size: Length-132” Width-77” height-64”. Sprockets are 1” wide at tooth area. 12 tooth. 2-5/8” spacing. Would work for H-78 chain. Price : 4,725 USD - Item ID-11778 - Daren 800-315-9950 x603 Mellot log turner & Hydraulic system - The Mellot Log 30 n

September 2011

Turner comes w/Joystick Control Valve And Hydraulic System. Price : 3,575 USD Item ID-11752 - Daren 800-3159950 x603

MISCELLANEOUS

2007 Monarch Dynasty Motor Home - Unbelievable package! Less than 30,000 miles! Luxury at its’ best. Came to seller from Bank Repo. Allison Automatic Transmission; Cummins Diesel. Surround sound entertainment with 3 TV’s! This is a top of the line motor home for a price you won’t believe. Call us for more amazing details of the

features. If you want to cruise the highways; here is the way to go! NC - Item ID-12140 - Tom 800-315-9950 or 615-3491890 x604 late 70’s Gafner Iron Mule Skidder Forwarder Model 4000 - 3 cylinder Ford with stick transmission, 18.4 x 26 tires @ 40%, 4x4 - Item ID12222 - Daren 800-315-9950 x603 Milling machine - Cincinnati #2 vertical milling machine. Price : 2,375 USD - Item ID11797 - Daren 800-315-9950 x603

MOULDERS

1999 Akemat Sharpening B-4 Facing Machines They are in great shape. Always used in oil. The hoods open when the saw is finished. Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com

Visit us online at www.LBXonline.com!


Fukami 6 head moulder - NTX150 - Item ID-11753 - Daren 800-315-9950 x603

PALLET MACHINERY

2005 Bronco Model 2006 Pallet Nailing System - Pallet nailing system with roll-out. Was used to build 48”x40”. New in 2005. One owner. Item ID-12108 - Daren 800-3159950 x603 Bob Hanna Double Head Pallet Notcher - Item ID-11815 - Daren 800-315-9950 x603 Hawk Bandsaw Dismantler - Powered by a 3-phase, 15hp electric motor. Has a 64” table. Can be a one or twoman machine. Large tires for extended blade life. Capacity is 50-80 pallets per hour. Manufactured by Saw Service & Supply Co. - Item ID-11065 Daren 800-315-9950 x603 Mark I Pallet Dismantler Mark One pallet disassembler, one-man, 62” table Mark I Item ID-11811 - Daren 800-3159950 x603 Pallet Chief lll nailer - Pallet

Chief lll auto naller Pallet Chief 3 - Item ID-11812 - Daren 800-315-9950 x603 Smart Bandsaw Dismantler - 64” table. Two-man operation. Less than 100 hours on a complete rebuild. Powered by a 15-hp 3-phase motor. Push button table height adjustment. 400-700 pallets per 8 hour shift. Manufactured by Smart Products. - Item ID-11066 Daren 800-315-9950 x603 Williams 200 H.P. Hammermill Grinder - This 200 H.P. hammermill was recently removed from a sawmill where it was being used to grind wood waste to boiler fuel for several large industrial customers. This grinder has a very large capacity and would work well in the grinding of whole pallets because it has a top opening size of 27” X 52”. This grinder is powered by a 200 H.P. electric motor that operates at 1200 RPM

Sawmill Exchange North America's Largest Source of Used Portable Sawmills. Over 800 Ads:

Portable Sawmills, Commercial Sawmills, Pallet and Cutstock Manufacturing, Firewood Manufacturing, Chipping and Grinding, Trimmers, Debarkers, Dry Kilns, Edgers, Resaws, Ripsaws and Gang Saws, Loaders, Moulders and Planers, Sawdust Blowers and Chains, Conveyors/Transfers/Decks/Green Chain, Rolling Stock, and Much More!!

The Place to Sell Your Equipment Call Us for a Free List of Over 800 Ads or to Sell Your Equipment.

800-459-2148 (

)

2004 HydroAx 570 Feller Buncher Item ID: 12316 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

and uses 460 voltage for its power. The electric motor is direct coupled to the grinder through a shear coupler to prevent damage from being done to the grinder. This machine is equipped with a bar type screen that determines the size material the machine is going to produce. Of course this screen can be changed to achieve many different size

P.O. Box 710930 • Houston, TX 77271

Factory refurbished in ‘99 Item ID: 12126 Contact: Daren/Michelle    800.315.9950 Ext. 603 www.LBXonline.com

materials being produced from the same machine. This machine comes with a size # 6 motor starter and 600 amp breaker which are enclosed in a large free standing electrical cabinet. This is a very nice clean unit and would work ideally for many grinding applications. - Item ID-12011 Daren 800-315-9950 x603

PLANERS

MDI probe 2100

Portable Industrial Metal Detector Simple to operate –

just turn on and go! MDI’s Superior Digital Technology will detect an 8d nail buried 15" into a log! • Pre-set for maximum sensitivity with adjustable sensitivity control • Microprocessor controlled; eliminates mineral interference from logs or round for maximum detection depths • Bright L.E.D. display indicates signal strength and battery level • Touchpad control allows precision pinpointing of tramp metal

US & Canada

www.sawmillexchange.com

1993 Morbark 1200 Tub Grinder

P.O. BOX 26440 • EUGENE, OREGON 97402 PHONE: 541-345-7454 • FAX: 541-345-7971 www.metaldetectorsinc.com

“Providing a full range of industrial metal detectors since 1965.”

For Classifieds Call Your LBX REP at 1-800-315-9950

The Original Lumberman’s Exchange n 31


Price for Quick Sale!

1994 Moffett Truck Mount Forklift Item ID: 12321 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

Newman 4 sided planer - This 6-3/4” x 16” capacity 4 sided planer has been updated with separate motors for the feed, top head, bottom head, and both of the side heads. It has sat idle for some time but is restorable. I overhauled the side heads and they have been stored inside. This machine differs from most

32 n

September 2011

2001 Multitek 2020 ldsc Firewood Proc w/20 ft. conveyor Item ID: 12131 Contact: Daren/Michelle 800.315.9950 Ext. 603 www.LBXonline.com

500 models in that it has 9” feed rolls rather than 8” - Item ID-11729 - Daren 800-315-9950 x603 Newman S682 two sided planer. 6”x30” capacity. 6 knife heads - 30” Width, 6” max. & 1/4” min. thickness cap., shortest stock 46” (not butted) 20” butted; manual thickness adjustment. Equipped with: 40 HP - 3,600 RPM Direct drive motor to top

2009 JD 848H Skidder Low hours! Item ID: 12318 Contact: Tom  Ph: 800-315-9950 x604

www.LBXonline.com head, 20 HP - 3,600 RPM direct drive motor to bottom head, both heads with NEWMAN 6-knife straight cutterheads, 7” max. cutting circle. Sectional top chipbreaker with 3” wide hardened steel sections, 1-1/2” max. travel. 10 HP Mechanical feed drive, variable feed speed from 50 - 150 FPM, feed system with (6) 8” dia. feed rolls, (2) top infeed rolls sectional with

2” wide segments allowing 5/16” independent yield and 1-1/2” yield of the entire roll, max. cut top 1-1/2” and 1/4” bottom. - Item ID-11747 Daren 800-315-9950 x603 Yates American planer, 18inch - Yates American planer, 18” model J18, 2-speeds, 3-phase, new knives, +/-5 on the cut, ready to work! - Item ID-11860 - Daren 800-315-9950 x603

PORTABLE SAWMILL

Timber Harvester Sawmill - 5600 hrs runs and works great, cuts 30”wide and 21’long 30hp Deutz motor fully hydraulic mill Price : 17,500 USD - Item ID-11895 Daren 800-315-9950 x603

RECYCLING EQUIPMENT

1990 Morbark 16 whole tree chipper - new Cat engine whole tree chipper with 16” diameter capcity, cab and grapple loader, grapple loader is in good condition, 1000 hours on new Cat engine, only 3500 original hours, new clutch, new belt, new bearings, needs some paint,

Visit us online at www.LBXonline.com!


Over 20 years in Business

DVDs Available

Item ID: 12304 Contact: Daren/Michelle 800.315.9950 Ext. 603 www.LBXonline.com

some dents in the cage, but overall mechanically sound whole tree chipper. Price : 29,500 USD - Item ID-11863 Daren 800-315-9950 x603 1991 Haybuster IG-8 tub grinder - 1100 hrs, 2” screens, john deere diesel engine, swing hammers have been replaced, discharge belt has been recently replaced, only used to regrind bark Price : 25,000 USD - Item ID-11864 Daren 800-315-9950 x603 1993 Morbark 1200 Tub Grinder - rebuilt by Morbark in 1999. Equipped with grapple, 650-hp Cat Diesel engine, rebuilt clutch, rebuilt hammermill, oversized hammermill and wider-longer conveyor. 9500 hrs approx. Price : 82,500 USD - Item ID12126 - Daren 800-315-9950 x603 1993 WHO P12-63XSHD - 700 HP CAT 3412 Engine, owner used it to grind mulch, comes with misc. parts, Approx. 13000 hours and is working daily. Engine was rebuilt by Cat 4500 hours ago. Owner is selling due to buying a larger machine. This machine won’t last!!! - Item ID-12139 - Daren 800-315-9950 x603 1994 Duratech HD8 tub grinder - has only 204 hours on it! John Deere turbo diesel with 131 horsepower, new under belt, new roller bearing, new hydraulic pump, and new exhaust. swinging hammers on mill, 2 sets of screens included (3” and 1

1987 Clark F67 Skidders (2) Running; (2) for parts; (4) for the price of One!

Paul Bunyan Show

The Original American Forestry Show

We Now Have SIX Models to Choose From

T h e o l d e s T f o r e s T i n d u s T ry s h o w i n T h e u n i T e d s TaT e s

October 2 - 4, 2009 f e aT u r i n G : n Live Equipment Demonstrations and Sales

®

n Lumberjack Competitions & Entertainment n Game of Logging Finals e V en T s & s e M i n a r s d es i G ned f o r: n High Production Sawmills (saw filing and maintenance) n Forest Landowners n Portable Band Saw Owners n Professional Loggers

October 7–9 Cambridge, OH

for more information, visit www.ohioforest.org. 888-38-TREES Guernsey County Fairgrounds, Cambridge, OH Just six miles east of I-77 and I-70.

n CE Credit Available No pets or unauthorized vehicles permitted on show grounds.

Item ID: 12326 Contact: Tom  Ph: 800-315-9950 x604

www.LBXonline.com 7/8”), 10’ discharge conveyor, good tires, 25/16” ball hitch on trailer. original owner’s manual included, ready to go to work on your yard waste or pallets! Duratech CO. also owens Hay buster. The Haybuster nane tells you that it is more for farming and the Duratech name tells you that it is for heavy duty work such as gring heavy material, but they bouth fall under the DURATECH name as the company is DURTACH INC. Price : 43,000 USD - Item ID-11861 - Daren 800-315-9950 x603 1994 Haybuster HD-10 Tub Grinder - Powered by a John Deere Diesel Engine, Hydraulic Driven Tub and Conveyors, 10’ tub size, Hour Meter Reads: 920 Hrs, S/N: 18-1-49-0312 - Item ID-11693 Daren 800-315-9950 x603 1995 MORBARK 1250 - Fixed Hammers, Knuckle Boom, Cab, and 36” Tarantula Heavy Duty Grapple, Tripple Axle, Magnetized Pulley Conveyor, Cat 3412DITTA, 750HP Engine. 1st Hour Meter Replace:6425. 2nd Hour Meter Replaced: 634. Price : 67,000 USD - Item ID-11704 - Daren 800-315-9950 x603 1995 WHO P12-56 Tub Grinder - Cat 500 hp, hyd raising tub, updated/new hammer mill, new tub floor, clean unit ready for work. Price : 54,900 USD - Item ID-11818 - Daren

(6 Models)

10', 20' and 30'

Now One Phone Puts You in Touch with the Single Source for all your Sawmill Needs! Corley Sawmill Machinery Tyrone Berry Carriage Drives Lewis Controls Optimization Carriage Linear & Set Shaft Lewis Controls “Electronics for sawmills by sawmillers” Tyrone-Berry Carriage Drives & Parts • Headrig Slabbers Log Turners • Bandmills & Linebar Resaw Systems Board & Gang Edgers • Trimmers

The Most Complete Line of Sawmill Machinery Since 1905! Single Machine or Complete Turn-Key Operation More Production & Profit is Only One Call Away For Parts, Service & Sales

Call (423) 698-0284 CORLEY

For Classifieds Call Your LBX REP at 1-800-315-9950

mfg

1998 Bell Ultra C w/30” Dangle Head

www.corleymfg.com • sales@corleymfg.com

The Original Lumberman’s Exchange n 33


ROW ELECTRICAL EQUIPMENT, INC. YOUR SOURCE FOR USED, RECONDITIONED:

• Squirrel Cage Motors • Gear Motors • Wound-Rotor Motors • Synchronous Motors • DC Motors

Fax to:

• DC Motors - Crane and Mill • Adjustable Speed Drives • Generators - AC and DC • Engine-Generator Sets • Transformers, Single Phase

P.O. Box 2812 • Toledo, Ohio 43606

• Transformers, Three-Phase • Across/Line Magnetic Starters • Reduced Voltage Starters • Safety Switches • Phase Convertors

800-248-4479

www.rowelectrical.com 419-248-4479 rowelec@glasscity.net WE ANSWER THE PHONE 24 HOURS • WE BUY USED Electrical

419-244-8887 Like New!

209 JD 240DLC

w/Denarco DM4150 Stroker Item ID: 12308 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com 800-315-9950 x603 1996 Morbark 2400 Chipper - Twin Disc Clutch,New Paint and Decals,Panels in Great shape,Pintle Hitch,New Knives,12X16.5 Tires Price : 18,900 USD - Item ID-11879 Daren 800-315-9950 x603 1999 CBI Model 4800 Grinder 1680 Hours: Twin Disc Clutch; Flex reversible fan, Remote control, Weight 93,000 lbs., Tires 445/65R22.5, New teeth, Updated hammers, Full engine service just completed; Cat 3412 engine w/12 cylinders; Ready to go to work; Very good condition - Item ID-12047 - Tom 800-3159950 or 615-349-1890 x604 2002 Brush Bandit 250 - 12” capacity disc-style chipper with auto-feed Cat 115 horsepower engine, in 2006 engine got new assembly and 34 n

September 2011

‘02 Timberjack 608s w/Hot Saw Item ID: 12194 Contact: Daren/Michelle 800.315.9950 Ext. 603 www.LBXonline.com

doghouse, 137+/- hours on new engine, 1260+/- hours on frame, upper feed wheel hydraulic lift, work ready! Item ID-11835 - Daren 800-3159950 x603 2003 Morbark 7600 - 3200 hours on a Cummins 12-cylinder engine, 1000 horsepower, ran daily, magnetic end pulley, wireless remote, 5X5, 8X8 screens, Twin Disc clutch, tight clutch, new mill rods, balanced mill, new lights, 85%-95% tires, very good value for a horizontal grinder this size! Item ID-11830 - Daren 800-3159950 x603 2003 PETERBILT 379 with Box and new Serco 8500 VIN: 2XP5D89X13M591354; CAT 475 HP Diesel; 540,000 miles. Air Trac Suspension; Aluminum Wheels; 24.5 Tires;

2001 Komatsu PC200LC6C Item ID: 12322 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

Truck in excellent condition. Double Frame. Has new box and new Serco 8500 loader. Perfect for storm or FEMA cleanup. Customer will sell separately. AR - Item ID-12112 - Tom 800-315-9950 or 615-3491890 x604 2003 ROTOCHOPPER CP118 - Portable wood chip processor with coloring unit. This machine runs good but has an electric problem it keeps flipping the circuit breaker for the conveyor and auger Sold at this price As Is needing work to electric has extra screens, 2” screen. Will produce 35 - 40 yards per hour Price : 40,000 USD - Item ID-11973 - Daren 800-315-9950 x603 2004 BANDIT 3680 Beast Horizontal Grinder - approx. 4500 hrs., working Daily Price

: 145,000 USD - Item ID-11819 Daren 800-315-9950 x603 2004 Morbark N-viro Mulch 2000 - 1994 year model. Powered by a 21-hp Kuboto Diesel. Has a 5 yard infeed hopper, mixing screw and colorant pump. 35’ auger, new motor on color pump and can process around 30 yards per hour. - Item ID-12109 - Daren 800-315-9950 x603 2006 Morbark 30 x 36 Chipper - 350 hours on meter. Unit has about another 1500 unrecorded hours. JD 450 HP Engine. Pintle trailer hitch. Air Compressor. Remote Control. Very good price. - Item ID12281 - Tom 800-315-9950 or 615-349-1890 x604 2006 Morbark Hurricane 18 Chipper - Super clean chipper. 1050 hours. Strong engine. Great condition. Ready to go to work! - Item ID-12240 - Tom 800-315-9950 or 615-349-1890 x604 2006 Morbark Hurricane 18 w/Loader - 275 HP JD engine. Very clean chipper. Runs very well. 1190 hours. Easy to transport. Great value! - Item ID-12241 - Tom 800-315-9950 or 615-349-1890 x604 2008 Morbark 3800 Wood Hog - Super Clean machine! Only 3064 hours. Very well maintained. S/N 189-1033. JD 600 HP Tier 3 Engine. Remote control. Mag End Pulley. Hydraulic Fan. Break away mounts. PT Tec Wet Clutch. 3”

Visit us online at www.LBXonline.com!


JOCKEY GRINDER OWNERS!!! The Secret:

The parts that touch the tooth don’t move!

Are wear plates costing you too much money?

“EZ-SLIDE” TOOTH STOP Introducing & TOOTH REST

In Stock for:

F and 2-1/2 style saws B and 3 style coming soon

This Patented, Spring Loaded Design • Allows for EZ sliding of the grinding wheel to the tooth. • Eliminates the sticky divots of the old style wear plates. • Saves you time and money with better control of the sharpener and more consistent sharpening of your saw teeth. The high quality stainless steel wear plate contacts the tooth as the aluminum frame and grinder move to sharpen the tooth. Our sawyers say they will not go back to the old style parts. Joe Nowak Lumberjack Hardwoods Menominee, Michigan

This is one of the best innovations in our industry to come along in years. Where was this 30 years ago? Kevin Mueller Mueller Brothers Timber Old Monroe, Missouri

The EZ-SLIDE has saved many happy customers time and money.

Call 1-800-582-0470 TODAY Hex Screens. - Item ID-12277 - Tom 800-315-9950 or 615-3491890 x604 Dura Tech HD-8 Tub Grinder - Haybuster tub grinder, 8’ opening on tub, 16” x 10’ discharge conveyor, trailer mounted, 215/75R17.5 tires, John Deere diesel engine 110-hp, 705 hours. New clutch, new hitch and new oil temperature guage. Maintenance done, changed out fuel and oil filters; changed the oil. - Item ID11803 - Daren 800-315-9950 x603 Duratech HD12, 12’ tub grinder - 1999 Duratech HD12 great running tub grinder with brand new mill, new

clutch pak, new tub ring, only 100 hours on rebuilt Cat engine 460 horsepower, swing hammers, hydraulic tilt tub, 5 sets of screens included 1”, 2”, 3”, 4”, and composting screen, magnetic head pulley, 2 extra sets of hammers, includes regular tires and foam-filled tires for yard use Item ID-11848 - Daren 800-3159950 x603 Duratech IG-10 Tub Grinder - Powered by a 300-hp diesel engine. Has 3000 hours. Magnet on the discharge. New hammermill and new belts. 2” screens. - Item ID-11320 Daren 800-315-9950 x603 Gyro Trac GT25 - Machine has 1278 hours. - Item ID-11801 -

www.menomineesaw.com Info@menomineesaw.com

Daren 800-315-9950 x603 Haybuster H1000 PTO Tub Grinder - Tub has been reinforced. Belts are almost new. Mid 80’s model. Has either 2 or 3” screen. Is 10’ wide at top of flair. TRANSPORT DIMENSIONS Width 10 ft. 3 in. (3.12 m) Length 21 ft. 4 in. (6.50 m) Height 10 ft. 2 in. (3.10 m) Item ID-11554 - Daren 800-3159950 x603 Haybuster IG-8 Tub Grinder - Powered by a 110-hp John Deere diesel engine. Has only 1034 hours. Includes a 1” and 1-1/2” screen. 8’ discharge conveyor. - Item ID-11426 Daren 800-315-9950 x603 Morbark 290 Wood Chipper

For Classifieds Call Your LBX REP at 1-800-315-9950

- everything done and ready for spring , great machine for landscaper or a second back up machine for a small tree company, chipper has always started and chipped, extra sharpened blades, it has a cummins diesel engine, 88 horse power, has new tires and brakes Price : 6,750 USD Item ID-11897 - Daren 800-3159950 x603 MORBARK 58 Chipper - This machine is ready to work Item ID-12082 - Daren 800-3159950 x603

RESAWS

Morgan band resaw - Morgan band resaw has automatic return belt, 220/440, 3-phase, early 90’s model Price : 5,500

The Original Lumberman’s Exchange n 35


USD - Item ID-11866 - Daren 800-315-9950 x603

ROLLING STOCK

1974 Peterbuilt Water Truck - Model 351; Good condition. Runs and pumps water well. - Item ID-12060 Tom 800-315-9950 or 615-349-1890 x604 1983 Mack Cruiseliner w/tail mount 1986 Hood 7000 Series loader - Mack E6-350, 800k+ miles, 9 speed Fuller trans, 20k lb.front axle w/ floats, 44k lb. rears. New in last 2 years – windshield, paint, front rims, tires, batteries, reman transmission, conversion to S-cam brake assemblies on front axle, rear brake shoes, air compressor, air dryer, rear suspension w/ trunion, buckets, bushings, truss rods and frame rail, front grille, cab jack pump, recent clutch adjustment, fluids changed and more. Rubber at 75 percent, some minor leaks. Parts truck available. Hood 7000 loader w/ 22foot boom, butt grapple and 11k# lift capacity @ 10 feet. New in last 2 years – main boom cylinder, left grapple cylinder, rod ends in right grapple and jib boom cylinders, all other cylinders repacked and/or rebuilt as needed, external filter assembly, valve sections and spools, most swivels and hard/soft lines. Some minor leaks. will take offers! - Item ID-11796 - Daren 800-3159950 x603

SAW GRINDERS & STRETCHERS

Armstrong Band grinder. - Nice #4 L.H. Serial RB 6642. Air back feed. 3 Stands. Updates. Cams: 50E 4U W, 50E 4U F Price : 7,500 USD - Item ID-11777 - Daren 800-3159950 x603

SAWMILL

Why? • We use only the highest quality nickel alloy steel • NEW state of the art CNC milling centers for perfect pocket geometry • 100 + years of combined hammering and manufacturing experience • Proudly made in the USA • Stock to 10 days on standard sizes • Nations largest distributor/manufacturer of saws and knives

CALL 800-862-4544 Locations in • Hampden, ME • Meridian, MS • Florence, SC • West Monroe, LA www.usblades.net 36 n

September 2011

1992 Sanborn sawmill Mini-Max - 36” x 20’ log capacity, 40 HP diesel engine, hydraulic power unit, uses 6” wide saw blades, includes (10) saws. This machine has a log cleaner ahead of the saw mounted on sawmill. - Item ID12196 - Daren 800-315-9950 x603 1995 Simonds Automatic Bandsaw Leveler - Excellent Condition. Will improve cutting accuracy, filing room safety, saw life, leveling quality and filing room productivity. The paybacks from automatic leveling - less deviation, kerf reductions, and simplified saw maintenance. Price includes set up and training at your facility. Great value and a smart investment! - Item ID12085 - Tom 800-315-9950 or 615-349-1890 x604 1995 Simonds Vertical Circle Saw Leveler - Excellent Condition. Low Hours-3984 Hours. Runs and looks like new. Ball Type KRO-9702. Serial # 05-9702-1131 Reduce run out with this machine allowing your saws to cut more accurately. Remove all lumps and bumps. Laser readings of the saws flatness are displayed on digital screen. Able to process saws up to 32” diameter and plate thickness up to .150” thick. Price includes set up and training so you know you will be getting a great machine! - Item ID-12084 - Tom 800-315-9950 or 615-3491890 x604 2001 Timber Harvester Grade Resaw System - 2001 Timber Harvester Grade Resaw System, Capacity 12”x12”x16’, 28” dia all-steel band wheels, 30 HP electric motor, 1-1/2” blade package, Powered rollers, Pop-up cross-over chains, Board seperator, Off-line kicker-type turner, Push button setworks, Seperate hydraulic power pack for feed works - Item ID-12190 - Daren 800-315-9950 x603 2005 Cooks Acu-track AC 36 Heavy Duty - Machine has 1300 hrs on it, 51 HP Perkins Diesel. Runs the band Visit us online at www.LBXonline.com!


It Almost Floats!

1992 Ardco Swamp Trencher Item ID: 12312 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com saw which has a inch and half wide band on it, 12HP Kochler Gas Motor. Powers the hydrolic controls, it comes with a De-barker/ De-Mudder to save wear and tear on blades and keep them sharp, it has self log loader, and it comes with Extra Blades. Fully maintained, Oil is changed every 150 hrs. It will cut aprox on average 3,000 board foot a day. Price : 35,500 USD - Item ID-11902 Daren 800-315-9950 x603 2008 Challenger Grinder Model CHSP 200-4090 - Like New Condition. Only 315 hours. 120HP - 3 phase electric motor. 2 sets of screens, 3/4 and 1”. Photos say it all. Machine runs great. Owner lost contract. This machine makes great animal bedding. - Item ID-12284 - Tom 800-315-9950 or 615-349-1890 x604 46” Circle Sawmill - Stationary sawmill. 30-hp 3 phase motor. Can cut logs 12-15” in diameter and 10 ft long. Mill weighs 3000 pounds. Price: 8,500 USD - Item ID-12157 Daren 800-315-9950 x603 log decks - The bright colored long deck is a 30’ 2 strand with stop and loader and hydraulic drive. Strand spacing is 48”. Deck is based on 5x10 tube frame. Underneath is a 14’ 2 strand deck with 80” strand spacing. There is a gear box but no

1978 Clark 666 Grapple Skidder Working now; good price!

Item ID: 12325 Contact: Tom 800.315.9950 Ext. 604

motor. Could be hydraulic or electric. can be solld separt MAKE OFFER! - Item ID-11731 Daren 800-315-9950 x603 2006 SALSCO 30 Shaving Mill - Hour meter is not working properly, 83 hp cat, Box is 102”x 30”, has a blower and all knives in blower are in good shape Price : 48,500 USD - Item ID-11977 - Daren 800-

Financing Available

Item ID: 12331 Contact: Daren/Michelle 800.315.9950 Ext. 603

www.LBXonline.com

www.LBXonline.com

SHAVING EQUIPMENT

2006 JD 548G III Grapple Skidder

315-9950 x603 2007 SALSCO 30 Shaving Mill with Blower - 1686 hours, 83 hp Cat Engine, Box is 120”x 30” Price : 54,500 USD - Item ID-11978 - Daren 800-315-9950 x603 2009 Salsco 30 Shaving Mill 1255 Hours, 4 Sets Of Knives, 8 ft. Blower Pipe Extention, C4,4TA Cat Engine, Original Owner, Excellent Condition, Can See Running! - Item ID-

2008 JD 748H Grapple Skidder Will have new 30.5 x 32 tires! Item ID: 12314 Contact: Tom  Ph: 800-315-9950 x604

www.LBXonline.com 12182 - Tom 800-315-9950 or 615-349-1890 x604 Shaving Mill - Shop built, set up 1 year ago. Box is 48”W x 5-1/2’L. All electric, powered a 3-phase electric motor with converter. Comes with all electrical boxes. 2 heads with 3 knives per head. Powered by a 60-hp motor. Includes deck to feed and discharge conveyor. Processes 2 truck loads per hour. Runs about $150 per month in electric

Shrink Wrap Firewood/Wastewood

Sell Your WOOD – $300/cord or More! Double or triple your profits by shrink wrapping wastewood - forewood with WOOD-PAKer! Attractive various size packages can be obtained with our high production, easily operated and affordable machines. Eight machines available. The ideal equipment for producing square bundles-palletizable for ease in storage and transporting. Inquire for free details. Video and Package samples at nominal fee. B & B Manufacturing • 3007 West River Road • Olean, NY 14760

Toll Free 1-800-654-5320 E-mail: bbmfg@sprynet.com • Web: http://home.sprynet.com/~bbmfg/

For Classifieds Call Your LBX REP at 1-800-315-9950

The Original Lumberman’s Exchange n 37


  September 16 & 17, 2011 

London, KY Featuring the Latest Technology & Services for: Sawmill, Pallet, Logging, & Secondary Equipment, Loaders, Chain saws, Trucks, Parts, Safety Clothing, Accessories, New & Used Equipment, and Much More! Free Drawings for Door Prizes—Family Friendly—Educational Exhibits Tickets- Adults $3 ($5 at gate); Kids- $2 under six is free—Free Parking Events: Live Demonstrations of Machinery & Equipment– Inside & Outside Exhibits Lumberjack Contests Chain Saw Carving Skidder & Knuckleboom Contests Continuing Education for Loggers Live Bluegrass & Country Music and much more. For More Information On Exhibiting or Attending: Kentucky Forest Industries Association 106 Progress Drive Frankfort, KY 40601 Tel: 502/695-3979 Fax: 502/695-8343

www.kfia.org

New Recon Cummins

‘95 Timberjack 380C Cable Skidder Pulls Great!! Item ID: 12273 Contact: Tom  800.315.9950 Ext. 604 www.LBXonline.com use. - Item ID-11975 - Daren 800-315-9950 x603

VEHICLES-TRUCK/TRAILER/VAN

1996 Clement End Dump Trailer, 24FT X 96IN - Tandem Axle, Spring Suspension, Air Brakes, Steel Wheels, GVW 38 n

September 2011

2006 JD Dozer w/Winch Very Clean! Item ID: 12317 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com 77120, - Item ID-11997 - Daren 800-315-9950 x603 1996 Peterbilt Model 377 - 22 foot silage bed with end dump and hyd. gate,roll over tarp, would make a very good grain truck. 9 speed trans. 80% rubber, 475 cat engine, good truck ready to go to work. just put new shocks on front. bed sides are 60”. - Item ID-11597 -

Daren 800-315-9950 x603 1997 Mack CH613 w/1997 StaLite Log Loader Trailer - E7 Mack Engine 454-hp; 354,000 miles; 18-speed transmission; 12,000# front axles; 40,000# rear axles; Suspension Air Ride; 80% air brakes, PS, AC, airslide 5th, cruise control, hyd wet kit for log loader, alum headache rack, dual exhaust, includes 1997 StaLite 45 ft x 96” log loader trailer Price : 65,500 USD Item ID-11588 - Daren 800-3159950 x603 1998 MACK CL713 - w/ a 1998 Serco Loader, 25’ Boom, 1/4 Butt Grapple, Pintle Hitch, Tractor Package, Power Divider, Heated Mirrors, AC, Cruise Control. Front axle 20,000, Rears 44,000, Camelback suspension, 135,155 miles, 460 hp, 18 Spd transmission. Price : 62,000 USD - Item ID-11529 - Daren 800-315-9950 x603 2000 ITI 42’ Aluminum Chip Van - 5 Total Available. Top of

the line Chip Van. Some need front panel plate. Some need outside side panel. Very Good Condition. New price today is $40,000. - Item ID-12252 - Tom 800-315-9950 or 615-349-1890 x604 2000 Peterbuilt Logging Truck - N-14 Cummins engine, 18spd., 120 Prentice loader, pup trailer. Price: $68,000 Item ID-12159 - Daren 800-3159950 x603 2002 MACK GRANITE CV713 - 464hp, 664,500 miles, 18 spd, air ride suspension, 2002 SERCO 7500 LOADER AND 1996 ROSA PUP TIRES AND BRAKES at 80% Price : 70,000 USD - Item ID-11700 - Daren 800-315-9950 x603 2010 Pitts 42’ In Woods Aluminum Chip Van - 3 trailers available. All purchased the same time. Excellent Condition. Pitts 42’ Chip Van. Two axle; Seller lost contract. - Item ID-12253 - Tom 800-315-9950 or 615-3491890 x604

Visit us online at www.LBXonline.com!


For Classifieds Call Your LBX REP at 1-800-315-9950 11 PBS Ad 4.125x10.875.indd 1

The Original Lumberman’s Exchange n 39 6/23/11 8:09 AM


The Lumberman’s Exchange Post Office Box 1916 Columbia, Tennessee 38402

PRSRT STD. U.S. Postage PAID Permit No. 212 Pulaski, TN

Superior finished product control for biomass fuel, colored mulch, animal bedding, and other wood fiber commodities.

  

Electric or Diesel 150 - 875 Horsepower Portable, Stationary, or Track

Trust your wood fiber resources to the “Perfect In One Pass” TM advantage.

6 B-6 k c ly Tra Dol t w r Ne spo ran T with

Rotochopper, Inc. | 217 West Street | St. Martin, MN 56376