LBXonline Lumbermen's Magazine

November 2011

Since 1986 - The Original (800) 315-9950 or (615) 349-1890

Loggers • Sawmills • Pallet Manufacturers • Wood Recycling Equipment

DealS of the Month

2006 JD650-J Dozer w/Winch

Questions about Shaving Mills

has 50plus years of answers!

The Original Patented

Wood Shaving Mill … Since 1960!

• Several Models to choose from producing 7.4 Cubic Yards (5.7 Cubic Meters) to 50 Cubic Yards (38.2 Cubic Meters)

Serviced & Ready!

Item ID: 12317 Contact: Tom Ph: 800-315-9950 x604

Firewood Processor

• Utilize low-grade Logs & Slabs • Produce high-quality, fluffy shavings • Powered by Electric, Diesel or Tractor PTO • Complete wood shavings plant layout services available • Shavings Drying Systems

We Have Dryers Available

Wood Shaving Mill Single or Twin-Box Machine?

We offer both.

Phone us for details.

What Our Customers Are Saying— ”Jackson has been around long enough so they’ve figured out what works and what doesn’t.”

“Jackson Wood Shaving Mills simply last longer. They’re rugged and dependable.”

“In volume tests on production, the Jackson Wood Shaving Mill was tops—and in day-in, day-out production, it’s still tops!”

“Our Jackson Shaving Mill was built in 1966 and is still going strong!”

“As our business has expanded, we’ve come back to Jackson for Shaving Mills again and again.”

“We like the low maintenance and availability of manufactured parts for our Jackson equipment.”

Priced to Sell Fast!

Single man operation w/ circle saw tem ID: 12370 Contact: Daren/Michelle Ph: 800-315-9950 x603

See Photos online at— www.LBXonline.com

Around the Wo ld rl o S

d

For classifieds call (800) 315-9950 or (615) 349-1890

Manufacturers of — ✔ Shaving Mills ✔ Webb Solid-fuel Burners ✔ “Premier” Scragg Mills ✔ Stationary Sawmill Carriages

An dM

ade in the

.A. U.S

✔ Feedworks, Decks, Turners ✔ Hydraulic, Electric and Electronic Setworks ✔ Vertical Edgers, Horizontal Edgers ✔ “Lumber Harvester” Portable Sawmills

Company, Inc. 830 N. State Road 37, Mondovi, Wisconsin 54755 USA

Website: www.JacksonLbrHarvester.com

Phone: (715) 926-3816 Fax: (715) 926-4545

PALLET STOCK, STUDS, I-JOISTS, STRUCTURAL COMPONENTS THE L-M SAWS, WILL TAKE YOU TO THE NEXT LEVEL! Leading the industry in bundle cross cut systems since 1957!

New Design!

New Technology!

Portable Yard Saw

Model 200MP-7-SS Gas Model 100MP-7-SS Electric 3 inch side shift, a standard feature

Traveling Arch Saw

Hydraulically controlled No manual cutting Our most popular turn key system

The New L-M “I-CUT” Bundle cross cut system!

* 60’ long frame to precision cut your I-Joists * Precision accuracy of +- 1/32” * Shorter system are available to process all your cutting needs * Tremendous labor savings, Guaranteed!

L-M Deck Cut Off Saw 3 foot to 12 foot bar lengths Hydraulically controlled

Automatic Strapping System Attach bottom crossers Side squeeze incorporated Polyester strap

Flush End Bump Rollcase

Reduce or eliminate your end trims

The Verticut P4 System now offers scan and cut technology, reducing operator error by using a bar code system!

Visit our web site www.LMSaws.com to see our complete product line and videos!

L-M Equipment Co. Ltd

Phone: 604-431-8800 Toll Free: 1-800-455-8807 Web Site: www.LMSaws.com E-Mail: Sales@LMSaws.com

Hahn HFP160

Firewood Pro

Timber Harvesting Equipment

Hahn Machinery Inc. P.O. Box 220 • Two Harbors, MN 55616 www.hahnmachinery.com

T

urn your loader into a self-propelled firewood processor capable of picking logs out of the pile and cutting and splitting them onto the ground or conveyor or into a trailer, truck or bin. Operated by one person seated in the comfort and safety of the loader’s cab, the HFP160 is designed for commercial firewood operations and, when compared to traditional mechanical firewood processing methods can: • • • • • • • •

Reduce manpower requirements Reduce work comp costs Reduces fuel consumption Improve safety Provide greater mobility Dramatically reduce set up time Reduce handling of the wood Lower your cost per cord for an improved bottom line

The standard HFP160 is equipped with a 4-way splitter head with hydraulic height adjustment and 16” and 20” cut lengths. Optional interchangable 6-way and 8-way splitter heads and longer cut lengths are available.

For the past 37 years, Hahn Machinery has been noted for offering simple, rugged, and productive forestry equipment and the HFP160 is no exception

Call Today

1-800-483-8825 for complete details and a free DVD or email info@hahnmachinery.com Covered by US Patent #7,669,618

The

** Calendar **

Original

Lumberman’s Exchange

For Classifieds Call 800.315.9950 See pictures, prices, and Location of all equipment at www.LBXonline.com

Oregon Logging Conference Coming Feb. 23–25, 2012 Eugene, Oregon

Your #1 Source for Forest Industry Products!

BLOWERS

Phelps blower - Item ID-11742 - Michelle 800-315-9950 x603

CHIPPERS

Wood Technology Clinic and Show Coming March 13–15, 2012 Portland, Oregon

The Lumberman’s Exchange is published monthly and is circulated internationally to sawmills, loggers, pallet makers, recyclers and industrial woodworking plants.

Publisher Woods Publishing

Equipment Sales Reps

Advertising Sales Morris Woods (615) 349-1890 morris@LBXonline.com Design Director Heninger & Associates lbxonline@comcast.net

Working Hard for You at the Paul Bunyan Show

Equipment Reps Equipment Representative Daren Bodine (800) 315-9950 x603

(L to R) Tom Hirt, Michelle Canaday, and Daren Bodine

Equipment Representative Tom Hirt (800) 315-9950 x604 Mailing Address P.O. Box 1916 Columbia, TN 38402-1916 (615) 349-1890 Phone (931) 233-0802 Fax

** INFO LINK **

Ad Submissions May be sent to— LBXonline@comcast.net Postmaster Send address changes to: Lumberman’s Exchange P.O. Box 1916 Columbia, TN 38402

Amark........................................... 7 B & B Mfg................................... 37 B. H. Payne................................. 13 Baker...................................... 6, 15 Bartlett Saw Service................. 27 Bay Equipment.......................... 29 Blockbuster............................... 27 Buck Equipment (AIM) . .......... 14 Cardinal Wireless...................... 19 Cleereman Industries............... 26 Concept Products..................... 24 Cook’s Saw Mfg......................... 15 Cord Master............................... 22 Corley Mfg.................................. 33 CRD Metalworks........................ 23 CW Mill................................... 7, 12 Dyna Products........................... 18 Firewood Equipment Sale........ 38 Hahn Machinery.......................... 4 Jackson Lumber.......................... 1 Kasco-SharpTech........................ 9 Lignomat.................................... 19 Litco............................................ 13

11 PBS Ad 4.125x10.875.indd 1

The Original Lumberman’s Exchange is published monthly

by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers the Lumberman’s Exchange, its principles and associates are not held liable for errors or omissions. Reproduction in whole or part prohibited with-out written consent. ©2011 by Woods Publishing.

6/23/11 8:09 AM

LM Equipment, Canada.............. 3 Log Max...................................... 10 M&F Gauge................................. 14 Machinery Sales Co., Inc............ 8 Menominee Saw........................ 35 Metal Detectors Inc.................. 31 Midwest Sharpening Service... 28 Multitek...................................... 16 Phase-A-Matic............................ 25 Piper’s Saw Shop....................... 30 Resource Recovery................... 28 Rotochopper............................. 40 Row Electric.............................. 34 Sawmill Exchange..................... 31 Select Sawmill............................ 32 Sering Sawmill........................... 23 Sharp Tool Company................ 11 Suffolk Machinery....................... 2 US Blades................................... 36 Weaver Electric......................... 25 Woodmizer........................... 20, 21 X-S Iron......................................... 9

11 PBS Ad 4.125x10.875.indd 1

For Classifieds Call Your LBX REP at 1-800-315-9950

CM&E 36” chipper. Bottom discharge. - 75 HP - Item ID11751 - Michelle 800-315-9950 x603 2000 BANDIT 150XP CUMMINS 3.9L DIESEL 12 IN. CAPACITY - Item ID-11790 Michelle 800-315-9950 x603 2008 Dynamic 585 Chipper - Factory Rebuilt with upgraded components including new discharge chute, new larger bearings, new larger feed pins, new access panels to chip chamber wear plates. JD 500 HP engine with 2200 hours.

Limited factory warranty on upgraded features. - Item ID12059 - Tom 800-315-9950 x604 48” Precision Chip Pack Precision 48” 3 knife chip pac, 5x5 screener, with a brand new Y valve, 100 hp electric motor on the chipper, 15 hp motor on the blower, and a 3hp motor on the shaker.

This machine is in very good condition and is ready to work. There is a vibrating conveyor available with this machine. Ask about details and price. - Item ID-12128 Daren 800-315-9950 x603 Fulghum 54” 8 knife chipper.

- Horizontal feed. Vertical discharge. No motor. No pulley on machine but a bushing is present. - Item ID11737 - Michelle 800-315-9950 x603 HMC 48” Chipper - HMC 48”side entry, top discharge chipper. It has a model CM 48.

Serial 23-111. It has a 75 HP 208-230/460 totally enclosed motor and is a very clean looking machine - Item ID11750 - Michelle 800-315-9950 x603 Precision 58” Chip Pack - Complete refurbished Precision 58” Chip Pack. This

6/23/11 8:09 AM

The Original Lumberman’s Exchange n 5

Zip

❑ Please Remove

State

❑ Please Change

st The Mo Band r Popula in the Resaw ld!

Wor info@bakerproducts.net Call: (800) 548-6914 www.logtolumber.com

City

Your Log To Lumber Leader New! Right-of-way machine; full warranty; goes anywhere.

Item ID: 12146 Contact: Tom Ph: 800-315-9950 x604

Phone

*Company name and address required to process your change.

November 2011

✁

P.O. Box 1916 Columbia, TN 38402

The Original Lumberman’s Exchange

Address

Individual Name

2011 Cord King 48 w/Conveyor Company Name*

❑ Please Add

One of the All-Time Greats!

–October–

2008 Lamtrac 8290Q Mulcher

If you need to Change your Address or Add Your Name to our mailing list, then please complete this form and mail to: 6 n

DealS of Month From

The Model “A” Baker Band Resaw:

Equipment Representatives Call us today for all your used equipment needs!

free equipment listings! Call – (800) 315-9950

Priced to sell Fast!

Item ID: 12333 Contact: Daren/Michelle Ph: 800-315-9950 x603

1992 JD 643 Feller Buncher Daren Bodine Phone: 800-315-9950 Ext. 603

Price Reduced!

Item ID: 12285 Contact: Chris Woods Ph: 800-315-9950 x600

For classifieds call (800) 315-9950 or (615) 349-1890 See Photos online at— www.LBXonline.com

Tom Hirt Phone: 800-315-9950 Ext. 604

machine is been completely refurbished and is ready to work. - Item ID-12233 - Daren 800-315-9950 x603 Precision 58” Chipper Complete rebuilt Precision 58” Chipper with Factory Warranty. - Item ID-12232 Daren 800-315-9950 x603 Trelan DL18 Whole Tree Chipper - Powered by a 475-hp Cat 3406 diesel engine. Has a knuckleboom loader. Will chip up to an 18” diameter log. Is pulled with a semi tractor. Cab has sound protection and heat.

Rebuilt from the ground up, new wheel bearings, new face plate for chipper wheel, changed Detroit engine to Cat engine went from 300-hp to 425-hp, added new belts and heavier bearings. Only run about 6 months after rebuild.

Can be used to make fuelwood. Is ready to go, needs no work. Was manufactured in the mid 80’s. extra knives that come with it - Item ID-11292 Michelle 800-315-9950 x603

COMPLETE SAWMILLS

Frick Automatic Sawmill - 3 Head Block, Tyrone Berry Feed, 250 H.P. Cummins Power Unit, 4 Strand Live Deck With Stop And Load, Chain Type Log Turner, Frick Edger, Live Rollers, 30 Ft. Live Belt, 18 Ft. Green Chain. Ready To Work!

- Item ID-12217 - Chris 800-3159950 x600 Meadows #2 Sawmill Meadows #2 carriage - 15’ OAL with 4 headblocks - 3 hydraulic dogs - 5 axles, hydraulic setworks with pantograph arm assembly to carry hydraulic & electric lines from carriage to husk - clock face lumber dial controls for setworks & dogs.

Meadows #2 track frame, with idler assembly. Reckart hydraulic feed package with 40-hp electric motor. Mellott log turner. 35’ log deck with stop & load. 130KW generator.

- Item ID-11086 - Michelle 800315-9950 x603 Sawmill With Chipper Carthage carriage, helle

Visit us online at www.LBXonline.com!

Perfect for BioMass!

2005 Dynamic 565 Chipper (Factory Rebuilt)

Item ID: 12270 Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com sawmill and chipper - Item ID11992 - Michelle 800-315-9950 x603

EDGERS & GANGS

Meadows 7” X 48” Combination edger - Serial # T7-1738-99. Was once used with a shifting saw. Some, but not all of the parts for this are present. There are three 23” split strob saws. There is an

2001 MCB 621 REG Trommel Screen w/Radial Fines Conveyor Item ID: 12358 Contact: Daren/Michelle 800.315.9950 Ext. 603 www.LBXonline.com

integrel hydraulic system on this machine. 8’ outfeed. 10’ infeed with hydraulic roller holdover and two air popup pushover chains. Remote operator station. Hydraulic press roll lifter. Main shaft is 2-15/16”. There is no main motor present. There is a mast for shifting lasers but the system is not complete.

Footprint of unit: 7’ X 22’ Item ID-11733 - Michelle 800315-9950 x603 Ogam chain drive open arm gangsaw. - 2 Main drive motors included. 10 HP and 30 HP. - Item ID-11744 Michelle 800-315-9950 x603

FIREWOOD PROCESSORS

2006 Timber Wolf Firewood Processor with 26’ conveyor 1750 Hrs, auto cycle, operator cab, - Item ID-12020 - Daren 800-315-9950 x603 Best Value Portable Log Splitter - Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses

4-way wedge adjustable to single two way. Great Value!

PA - Item ID-12062 - Tom 800315-9950 x604 Firewood Processor Single man operation with Circle Saw - Firewood Processor Single man operation with Circle Saw, 2 splitting stations, hydraulic conveyor, 2 extra blades, 2 wedges 353 Detroit Power unit - Item ID-12370 Daren 800-315-9950 x603 New 2010 Puma Model 18GM Firewood Processor - Brand New. Can produce up to 2 cords/hour. The 18 GM Firewood processor is the introductory PUMA model.

Standard features include a live deck, fold-able stacking conveyor, and a foldaway

Save Your Stubs & Pieces!

➨

Let us reprocess them $25 per 100 Now have Factory Seconds $25 per 100 sticks

For Classifieds Call Your LBX REP at 1-800-315-9950

The Original Lumberman’s Exchange n 7

WE ARE OVERSTOCKED! PRICES REDUCED! TAKE ADVANTAGE OF THIS CHANCE TO SAVE BIG! 9802 North Vancouver Way Portland, Oregon 97217

When Calling Ask for Dept LX • machsales@msn.com

Ph: 503-285-6691 • Fax: 503-285-0449 World’s Largest Inventory New & Used Sawmill & Planing Mill Equipment Brewco B-800 Resaw

Leadermac 6-Head Moulder

Williams 30KS Hammer Hog

Bandmills & Headrigs Kockums L&B 7’ Air St. Bandmill Kockums 6’ Air Strain Bandmill Mebor Horizontal Bandmill Salem 6’ Air Strain Bandmill Salem 5’ Air Strain Bandmill L&B 6’ Air Strain Twins McDonough 62” Twin Air Strain Carriages & Drives Salem Linear 36" 2-Block Tyrone 240 Hydraulic Drive Corley 40” Hydraulic 3-Block Salem 24” 3-Block Linear Carriage USNR 2000, 42" Stud Carriage Salem 60” 4-Block Carriage Salem 42” 4-Block Carriage Chippers & Screens Kockums 66” Horiz. Feed Precision 58” Horizontal Feed Arasmith Lilly Pad Chipper Precision 48” 8-Knife Drop F. BM&M 5’X14’ Screen Rotex 6’X16’ Screen West Salem 58" Horizontal Feed Precision 8X8 Screen Precision 66" Horizontal F. Precision 118” HFBD Chipper Precision 96” Whole Log Precision 48” Horizontal F. CM&E 36” Rechipper Debarkers Nicholson 22” A-5 Debarker Edgers, Gangs & Ripsaws Mereen-Johnson 424DC Ripsaw Pinheiro Dip Chain Ripsaw

Over 13 Acres

of

Paul Gang Ripsaw Globe Panel Ripsaw Kimwood Short Block Ripsaw Globe Strip Saw Salem Late Model Combination Edger Mereen-Johnson 48” Ripsaw Filing Room Equipment Hanchett 84” Challenger Grinder MVM 160” Mag Bed Grinder (2) Vollmer CH210 Auto Sharpeners Gockel 163” Mag Bed Grinder Armstrong 3-10C Stretcher Roll Vollmer Cana E (8) Wright Mod. 1801 (3) Weinig R 934 Profile Grinder Newman G-200 Grinders Hanchett Knife Grinders (10) Wright W-1600 Auto Tipper Armstrong No. 90 Equalizer Armstrong Dual Side Grinder Armstrong No. 4 RH B.S. Grinder Armstrong No. 25 Circle Hanchett DN-40 Knife Grinder Armstrong No. 4 LH B.S. Grinder Armstrong No. 4 B.S. Stretcher Roll Hogs & Pulverizers Williams 30KS Hammer Hog Jeffrey 36 x 60 Shredder Zeno Low-Noise Grinder West Salem Big Brute Grinder Jacobson Hammer Mill Jeffrey 76WBH Horiz. Hog Gruendler 50XE Hammer Hog Miscellaneous 10’ Hydraulic Lumber Stacker CEMCO Combination Planer/Sander (2) Peerless 24-Unit Bins Tektronix Log Metal Detector Dog Ear Machine Industrial 3496 Finger Jointer

Industrial FJS-25 Finger J. System Hurricane 28” Chop Saw Fruilmac End Matcher L&M Log Cut-Off Saws Timesaver Sanders (6) Lumber Stackers (3) Irvington 20’ Trimmer, 1’ Saws 5-Arm Hyd. Tilt Hoist Sticker Recovery System Planers & Moulders Northfield Double Surfacer Yates-A-63 16-Knife Planer Pkg. Coastal 16-Knife 9” Planer Pkg. Weinig 22B Complete Line Weining 22A 5-Head Stetson-Ross Timber Sizer Mattison 226 12” Moulder Mattison 228 16” Moulder Diehl 6-head TF Moulder Buss 55 Double Surfacer Buss 88 Double Surfacer Wadkin 6-Head Moulder Weinig U22A, 6-head Newman 382 Double Surfacer Newman M712 12-Knife S-R 6-10-A1 10-Knife Coastal 24” 20-knife Planer S-R 6-14-D1 24” 16-Knife S-R Chip Blankers Weiniig P22N 5-Head Resaws Brewco B-800 Resaw Salem 5’ Air Strain Horizontal Smith Twin Horizontal Resaw McDonough 54” Twin Horizontal 36” Tri-State Tilting Resaw Turner 48” Rollfeed Resaw Turner 52” Rollfeed Resaw Salem 6’ Horiz. Air Strain Kockums 6’ Horiz. Twin Air Strain

WE ARE PARTING OUT

Woods Planers 412M, 414M, 407M, 409M. 415M Woods Moulder 132M Yates Planers A-20, A-62, A-66 Stetson-Ross Planers 6-12-A1, 6-12-C1, 6-10-A1, 6-14-D1 Mattison Moulders 276, 226, 228 SAVE BIG ON MOTORS AND MAJOR PARTS!

Great Buys On Used Equipment!

For complete equipment list, visit our website:

www.machinerysales.com

Or Call and Ask for Dept. LX

( 8 6 6) 241-2977

Low Hours!

2009 JD 240DLC w/Denarco DM4150 Stroker Item ID: 12308 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com hitch for easy storage. The 18GM Firewood processor is capable of splitting up to two cords per hour at the centralized operator station.

The 18GM is built with heavyduty construction, offers a quiet Honda engine, and is perfect for the small start-up operation or weekend warrior.

- Item ID-12299 - Tom 800-3159950 x604

FORKLIFTS

1994 Moffett Truck Mount Fork Lift - Very clean machine.

Runs well. Owner using now.

2686 Hours. Priced to sell.

Great for delivering products or working in warehouse with high reach. This is a bargain!

- Item ID-12321 - Tom 800-3159950 x604 1995 Nissan Forklift - 15,500lb Capacity, Model: DF05N70V, Diesel, Pneumatic, Side Shift, 2-Stage Mast, 177 Max Mast Height, Hour Meter Reads: 8,224, S/N: 001800 - Item ID11892 - Michelle 800-315-9950 x603 2000 Hyster H155XL Forklift - 15,000 lb Capacity, LP Gas, Rough Terrain, Pneumatic, Tilt, Side Shift, 2-Stage Mast, 173.2 Max Height, Hour Meter Reads: 3,938, S/N: F006D05789X - Item ID-11893 Michelle 800-315-9950 x603 2004 Moffett Model M5500 Truck Mounted Forklift - 1418 Hours; Kubota Diesel; 4’ Forks, Side shift, 4 Way steer, 12’ Mast, Tires Front 31.5X13-

2006 JD 548G III Grapple Skidder

Item ID: 12331 Contact: Daren/Michelle 800.315.9950 Ext. 603

www.LBXonline.com 16.5, Rear 31X15.5-15. If you deliver products on a truck, this forklift goes with you.

Top brand in the industry.

Priced to sell. - Item ID-12069 Tom 800-315-9950 x604

GENERATORS

350 KVA Cummins - Genset with 9000 hours. - Item ID11994 - Michelle 800-315-9950 x603

HOGS/WOODGRINDERS

West Salem Grinder and Gen Set - Model WSM 2822, With a Cutler Hammer Soft start.

There is also a full set of extra hammers that go with it plus one original from factory to use as a pattern when rebuilding the others with hard surfacing. The gen set is a 360 KW with a Big Cam 855 Cummins engine. Extremely low 670 Hours. Owner is negotiable. - Item ID-12386 Daren 800-315-9950 x603

KNIFE GRINDERS

Hanchett Circular saw grinder - This circular saw grinder appears to be capable of grinding up to a 36” diameter saw. Plate info: Size 724.

Serial # 8109 - Item ID-11746 Michelle 800-315-9950 x603 Schneider Pattern Knife Grinder - Item ID-11743 Michelle 800-315-9950 x603

Logging Equipment

1989 Stump Master Tub Grinder. 450hp Cummins Engine. Many new parts & improvements! Reduced Price! $37,000. Call 800-743-

Contact Us for Your Equipment Needs. If we don't have it, we can find it!

304.872.2988 94 Bandit 1400 Track Chipper - 6 BT Cummings power plant, Cat U/C at 60%, Disk style chipper head, continous rotating grapple, 14 in tree max for chipping, showing 5,128 hrs....................$41,000 99 Int Eagle - N 14 525 Cummings motor, 18 speed Eaton trans, 46 full locker rears, Tag axle at rear of frame, 4 sets of bunks, set up to pull pup trailer ...........................................................$37,500

07 John Deere 450J - 6-way hydraulic blade, closed cab with heat and air, forestry package with winch, 60% on tracks and uc showing 3,177 hrs. ........................................................ $48,500 Husky Brute XL235 - CRT bucksaw with interchangeable measuring deck, continous turn Rotobeck grapple, cummings powered, on a Pitts 5th wheel trailer, showing 6,250 hrs............ $35,000 Aluminum framed log trailer with four (4) sets of bunks................................................ $7,500

For Classifieds Call Your LBX REP at 1-800-315-9950

The Original Lumberman’s Exchange n 9

Jon Goettl, of Goettl Logging, purchased the first of its kind fixed head from Log

Max. “I approached Log Max about a fixed head, not only did they deliver but I was able to help with design suggestions and improvements. The first unit has helped my business so much I have ordered a second one.�

For more information on the Log Max 7000XT Fixed Head contact your Local Log Max Dealer.

Scan this QR code with your smartphone barcode reader app to see a video on a Log Max 7000XT Fixed Head processing hardwoods on a Timber Pro 725 Track Machine

Western Canada

Toll Free 1.800.666.4474

10 n

November 2011

Jon Goettl Goettle Logging Chippewa Falls, WI

www.LogMax.com USA

Ph. 360.699.7300

Eastern Canada Ph. 506.869.2325

Visit us online at www.LBXonline.com!

Motivated Seller - Ready to Work -

48” Precision Chip Pack w/90’ vibrating conveyor Item ID: 12128 Contact: Daren/Michelle 800.315.9950 Ext. 603

www.LBXonline.com

New Recon Cummins

‘95 Timberjack 380C Cable Skidder Pulls Great!!

Item ID: 12273 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com 3491 for additional info or visit www.hogzilla.com.

1961 Caterpillar 944 Wheel Loader - Tire, Brakes, Bucket all are in good shape, Machine is Ready to work Serial #43A1589 - Item ID-12156 Daren 800-315-9950 x603 1974 BARKO 160 Knuckleboom Loader Log Loaders/Stackers - Detroit engine, mounted on IH truck, with Barko 42 grapple Price : 15,500 USD - Item ID-11979 Daren 800-315-9950 x603 1976 Clark 664 Cable Skidder - Approximately 7500 hours.

S/N 514F-2341-CAC. Strong

Clark Winch; Tire chains; Pulls good. - Item ID-12249 Tom 800-315-9950 x604 1977 (est) JD 540A Cable Skidder - Nice little unit that still runs well. 28L tires at 35%. JD engine. Hour meter not working. - Item ID-12199 Tom 800-315-9950 x604 1978 Clark 666 Grapple Skidder - Strong skidder. Esco 26 grapple with winch. 28L x 26 tires at 60%. Open ROPS cab. Stick Steering. Detroit 4-53 engine. Runs good. - Item ID-12325 - Tom 800-315-9950 x604 1979 JD 440C Cable Skidder - Rebuilt Deere 4 cyl. engine; Manual Transmission, Bodygood, open cab w/ ROPS, dozer blade, diff locks, winch with cable; Tires - 16.9 x 30 4@30%; Hour meter shows 3400. Color - Yellow. VIN #: 440C334150T - Item ID-12091 Tom 800-315-9950 x604 1981 Dresser 510B - Dresser 510B Pay Loader, meter shows 8571 hours. Had a new Komatsu engine installed 3000 hours ago. Starts and runs great, tires are 85%.

Comes with forks, owner also has bucket. - Item ID-12359 Michelle 800-315-9950 x603 1984 John Deere 540B Skidder - 1984 540B Skidder 95%

Rubber Transmission Rebuilt Winch Rebuilt Front Rear end Rebuilt Rebuilt Radiator - Item ID-12343 - Tom 800-315-9950 x604 1984 John Deere 640D Cable Skidder - NEW TRANSMISSION; John Deere 6cyl Diesel Engine; 30.5 x 32 tires at 70%. Great flotation.

Winch works well; Runs good.

VIN #: 640DC513656 NC - Item ID-12092 - Tom 800-315-9950 x604 1985 Timberjack 230 Cable Skidder - Still a strong working machine. Detroit 3-53 recently rebuilt. 28L tires at 30 - 40%, PLUS 2 spare axles, 3 spare tires & riims, and a spare transfer case! Winch pulls strong. Excellent value!

- Item ID-12272 - Tom 800-3159950 x604 1986 Peterson Portable Flail Debarker - Excellent Condition. 4600 hours.

Cummins 6 cylinder engine.

Ready to work. CA - Item ID12187 - Tom 800-315-9950 x604 1987 Cat 988 Loader with Forks - 27,000 hours. Fair Condition. Big capacity. - Item ID-12186 - Tom 800-315-9950 x604 1987 Clark F67 Skidders: 2 Running; 2 for Parts! Customer selling 2 running

For Classifieds Call Your LBX REP at 1-800-315-9950

Clark F67 Grapple Skidders and including 2 more F67’s for parts. Units have Cummins Engines, 28L x 26 tires, most better than 50%. Photos not great. Owner ready to sell!

- Item ID-12326 - Tom 800-3159950 x604 1989 CAT D5H TSK - WITH WINCH & FAIRLEED-GOOD PAINT-GOOD SHAPE, 6-Way Item ID-12029 - Daren 800-3159950 x603 1989 Clark 666 Dual arch grapple skidder - The machine has a new cummins 5.9l engine with less than 300 hrs on it. A new grapple with around 50hrs, 2 new interstate batteries and a new starter on it. It fires right up even in the winter. This machine is ready to work!!! Item ID-12219 - Daren 800-3159950 x603 1990 John Deere 640D Grapple Skidder - Single arch, Esco grapple, 30.5-32 tires. - Item ID-12214 - Daren 800-315-9950 x603 1991 Cat 518 grapple skidder All belly pans and sheet metal were removed so the machine could be steam cleaned.

All the cylinders have been packed. The radiator is rebuilt with new tanks. New starter has been installed. A

The Original Lumberman’s Exchange n 11

12 n

November 2011

Visit us online at www.LBXonline.com!

2007 JD 643J Feller Buncher w/Bunching Hot Saw Item ID: 12279 Contact: Tom 800.315.9950 Ext. 604

2005 JD 648G III Dual Arch Grapple Skidder Item ID: 12330 Contact: Daren/Michelle 800.315.9950 Ext. 603

www.LBXonline.com

www.LBXonline.com

couple of new guages were installed. New hinge pins and steering pins installed. All filters and fluids have been changed. Many hoses have been replaced. Winch has been rebuilt. Brakes work good. New exhaust muffler and pipe installed. Tires have about 35% tread. Seat is in good condition. New paint and decals. - Item ID-11832 Michelle 800-315-9950 x603 1991 Hydro Ax 221 - hour meter broken good tread good running condition includes bush hog attachment - Item ID-11769 - Michelle 800315-9950 x603 1991 Hydro Ax 221 - John Deere, 4-cylinder Koehring 18” high speed disc saw 28L x 26 tires enclosed cab with heat and air - Item ID-11770 Michelle 800-315-9950 x603 1991 John Deere 548D Grapple Skidder - with winch, machine is tight and ready to work Item ID-12208 - Daren 800-3159950 x603 1992 Ardco Swamp Trencher - Model H-150. SN:1522.

Only 2200 HRS. Very Good Condition. DETROIT 6V71 with 310HP; Eaton heavy duty Hydrostatic Hydraulic Pumps and Motors = Sunstrand Hydraulic Drive = Funk double pump, 2800 series. Three Point Hitch for implement attachment Ditcher is a Dondi model 55 or 75. Enclosed cab with good working AC. Tires = 66 x 68:00 x 25 - 6 ply Super

Wide Flotation Tires at 98%.

This machine only offered by Lumberman’s. Fantastic buy if you need to work in wet ground. Used to help drain swamps or work in other soft ground conditions. This machine almost walks on water! Service records and books available from owner.

FOB: GA. - Item ID-12312 - Tom 800-315-9950 x604 1992 JD 650G Dozer w/Winch and 6-Way Blade - One owner.

Undercarriage at 70%. Runs good. 9523 hrs. Transmission was re-built about a year ago 75% undercarriage.

Good running machine. Well maintained. Root rake. Super Clean! - Item ID-12301 - Tom 800-315-9950 x604 1992 John Deere 643 feller buncher - Complete rebuild & paint less than 1000 hrs ago. New 28 L tires under 300 hrs. Brand new ice chains are included. All pins are tight, cylinders are dry. Strong hydraulics & hydrostats.

Strong 6.8 L turbo diesel, 175 hp, no smoke or blow by.

Many new parts & hoses. Has some minor hydraulic leaks & minor slop in the accumulator arm. Great brakes. E -brake needs adjusting, back up alarm doesnt work. No heat or a/c. Has a 20” shear head. Item ID-12285 - Contact-Chris WOODS - Phone- 800.315.9950 Ext- 600 1992 Linkbelt LS 4300 Log Loader - No Hour reading.

When You Buy Your Circular Saws From B.H. Payne You’ve Bought the best... We Guarantee It! Traditional Quality Combined With Todays Technology Quality Brand Reg. U.S. Pat Off

Circular Saws Saw Bits and Shanks Circular Knives Carbide Tipped Saws Carbide Strobe ® Saws B.H. Payne & Company Saw Manufacturers

Call 800 752-0627

Make Sure To Ask For Our Free, Complete Saw Catalog We Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels, Knife Grinding Wheels, Saw Gumming Wheels & Knives.

Here’s What You Get With Every B.H. Payne Saw • Saws manufactured from only the Highest Quality Nickel Alloy Steel.

• Each Saw Milled with State-Of-The-Art Precision CNC Milling Machine.

• We Tension Your Saw to Your RPM Speed BEFORE Leaving Our Factory.

• Your Satisfaction - Completely Guaranteed.

B.H. Payne & Company, Inc. P.O. Box 90608 East Point, GA 30364 404 761-8711 Fax 404 761-5398 “Since 1890” E-mail: info@paynesaws.com

For Classifieds Call Your LBX REP at 1-800-315-9950

Web Site: www.paynesaws.com

The Original Lumberman’s Exchange n 13

Real Tuff Baler&Baggertm Save $$$ on Bedding—Bale it Yourself!

Electric or Diesel, Manual or Automatic

$14,907 Effective May 1, 2011

Precision 58” Chip Pack

REAL TUFF INDUSTRIES Manufactured by M & F Gauge & Specialty Co., Inc.

PO Box 693 Brownwood, Texas 76804 Phone: 325-641-8300 Fax: 325-643-3243

BUILT TO LAST www.realtuffbaler.com

Dear Prospective Customer,

Thank you for inquiring about our Real Tuff Baler! From baling wood shavings to aluminum cans, the Real Tuff Baler is built to last, and priced for a quick return on your investment!

Real Tuff Baler

Real Tuff Baler Dimensions & Specifications

• Easy to use • Built of high quality materials and workmanship • Heavy duty to enable a broad spectrum of baling options • Easily loads by conveyor or manual method

- (2) Hydraulic Cylinders are controlled by using a two spool valve - 30 H.P. motor (220/440 volt 3 phase) starter not included - 25 G.P.M. Pump - 50 Gallon reservoir capacity

. Easy to use

. Built of high quality materials and workmanship

- Only the highest quality industrial components are used

. Heavy Duty to enable a broad spectrum of baling options

. Easily loads by conveyor or manual method Most Popular Baler Sizes

Real Tuff Industries Real Ruff Baler Size 12” x 16” x 36” 12” x 16” x 32” 11” x 17” x 36” 8” x 18” x 36” 5” x 10” x 16” - Call For Price

Bale Size

4.0 cubic foot bale 3.5 cubic foot bale 3.9 cubic foot bale 3.0 cubic foot bale 0.4 cubic foot bale

Bales per Hour

50 - 60 bales per hour 50 - 60 bales per hour 50 - 60 bales per hour 50 - 60 bales per hour 50 - 60 bales per hour

Phone: (325) 641-8300 Fax: (325) 643-3243 . Custom baler’s can be manufactured to your specifications .

Real Tuff Baler Dimensions & Specifications Manufactured by M & F Gauge Specialty Co., Inc. 2 - Hydraulic& Cylinders are controlled by using a two spool valve 30 H.P. motor (220/440 volt 3 phase) starter not included PO Box 693 • Brownwood, Texas 76804 25 G.P.M. Pump 50 Gallon reservoir capacity Only the highest quality industrial components are used www.realtuffbaler.com Real Tuff Baler Price: $12,997.00

Terms: 50% deposit upon receipt of purchase order. The blance is due upon completeion which will be approximately thirty days from placement of order. F.O.B. Brownwood.

03/08

14 n

November 2011

Item ID: 12233 Contact: Daren/Michelle 800.315.9950 Ext. 603 www.LBXonline.com Runs well. S/N 43OU25351; Isuzu Motor Young Live Heel Boom & Grapple; Elevated Tilt Cab; - Item ID-12251 - Tom 800315-9950 x604 1992 Peerless Drop Center Chip Trailer - One (1) Peerless Drop Center - Open Top - Chip Trailer 1992 Model - Serial#: 1PLE04426NPC80940 Model 44 - DC X 96” - Top Henge Rear Gate - Spring Suspension Reyco. 11R24.5 Tires - Steel Disc Wheels - Good Floor 50 - 70% Tires - Except 2 that are 40% 50% Brakes. - Item ID12341 - Tom 800-315-9950 x604 1992 Timberjack 240 Cable Skidder - New drop in 4 Cyl. Cummins engine. New transmission. 23.1 x 26 Tires 80%. Chains 75% good.

Gearmatic winch. Just spent $4000 on brakes. Excellent value. FOB: NH - Item ID-12274 - Tom 800-315-9950 x604 1993 Morbark Model 20 Tracked Chipper - Just over 8000 hours. Very solid and compact machine in good condition and ready to work.

Compact for the size. Has loader so unit is totally self contained. Tracks at 60%.

Great value for a tracked chipper. - Item ID-12339 - Tom 800-315-9950 x604 1993 Prentice 210 Loader on Trailer - Very clean unit. Works well. Cummins engine. 9355 hours. Bar Saw hydraulics. Heat and AC. Some cosmetic dents. Great value. - Item ID-12289 - Tom 800-315-9950 x604

2007 Tigercat 630C Skidder One owner, Big capacity!

Item ID: 12275 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com 1993 WHO P12-63XSHD - 700 HP CAT 3412 Engine, owner used it to grind mulch, comes with misc. parts, Approx.

13000 hours and is working daily. Engine was rebuilt by Cat 4500 hours ago. Owner is selling due to buying a larger machine. This machine won’t last!!! - Item ID-12139 - Daren 800-315-9950 x603 1994 Caterpillar 518C Grapple Skidder - Serial number 9HJ00425. This machine is clean and is ready to go to work. Over $12,000 worth of work has been done to this machine(All workorders can be e-mailed). All belly pans and sheet metal were removed for steam cleaning.

We have rebuilt the hinge pins and the steering pins.

We changed the front and rear seals in the transmission, and the pinion seals in both differentials. The radiator has been repaired. It has new fan belts and hoses. The steering valve, grapple valve, and brake valves were rebuilt. All cylinders have been repacked.

The Lufkin winch has been rebuilt with new clutch packs.

Installed new door latches.

Doors open and close good.

All fluids and filters have been changed. The tires are 28L- 26 in size and the tread will average about 40 percent.

Machine has been sanded and painted. The hour meter is showing 4163. The engine cranks up instantly and the

Visit us online at www.LBXonline.com!

2001 Komatsu PC200LC6C

Haybuster IG10 Tub Grinder

Item ID: 12322 Contact: Tom 800.315.9950 Ext. 604

Item ID: 12361 Contact: Daren/Michelle 800.315.9950 Ext. 603 www.LBXonline.com

www.LBXonline.com

transmission shifts good Item ID-12302 - Daren 800-3159950 x603 1994 Haybuster HD-10 Tub Grinder - Powered by a John Deere Diesel Engine, Hydraulic Driven Tub and Conveyors, 10’ tub size, Hour Meter Reads: 920 Hrs, S/N: 18-1-49-0312 - Item ID-11693 Michelle 800-315-9950 x603 1995 Franklin Tree Farmer Model C6 Forwarder - 6BT

Cummins engine; 30.5 x 32 tires at 50%; Ice chains on front; New pins and bushings on loader; Four bunk, 18’ bed; 4 speed power-shift transmission; Dual controls.

No hour meter. Good Condition. - Item ID-12328 Tom 800-315-9950 x604 1995 Hanover Model D3 Forwarder - 5156 Hours.

Loader has great lift capacity. Tires 70% or better.

Adjustable bunk extension for longer wood. New exhaust.

New batteries. Strong engine and transmission. Has 8 work lights. TX - Item ID-12162 Tom 800-315-9950 x604 1995 International 9300 Log Truck - Tri-axle, with 235,000 original miles. Has 2007 Hood 7000 loader. Drive tires are 98% stear tires are 50% and tag tires are 50%; Dayton hubs. 46,000 rears. - Item ID11502 - Michelle 800-315-9950

For Classifieds Call Your LBX REP at 1-800-315-9950

x603 1995 JD 290D with Hytec 4700 Harvester Head - 290D in good condition. Engine just overhauled. Undercarriage at 50%. Cab has heat and air with stereo and all run well.

Head recently updated and does great job in hardwood with stroker extension that shoots out at tough limbs.

Priced to sell! - Item ID-12206 Tom 800-315-9950 x604 1995 Prentice 210D Log

The Original Lumberman’s Exchange n 15

Complete Rebuild

Williams 200hp Hammermill Grinder 350 Hog Item ID: 12011 Contact: Daren/Michille 800.315.9950 Ext. 603 www.LBXonline.com

Loader with delimber - Hours Read: 12,191, S/N 210P50962, Mounted on a 1995 Evans 45’ Trailer - Item ID-12384 - Daren 800-315-9950 x603 1995 Timbco T445 with Quadco 22” head - 4600 hours on Total rebuild, New table and pins, new engine, new wiring harness, new track adjusters with zero hours on them, all new left rollers,

2008 Morbark 3800 Wood Hog Very clean, low hours!

Item ID: 12277 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com 4 out of 7 rollers have been replaced on the right side, U/C is 65%, Tracks are in good shape 70% approx., new hour meter was installed with new engine. - Item ID-12346 - Daren 800-315-9950 x603 1995 Timberjack 380C Cable Skidder - Very clean unit.

Working today in hardwood.

Less than 3000 on rebuilt Cummins 6BT engine. Tires

2010 Barko 295ML Loader w/ CSI Slasher; Like new, 500 hours!

Item ID: 12352 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

at 70%. Winch works great.

- Item ID-12273 - Tom 800-3159950 x604 1996 511EX Hydro-Ax With Bunching Saw Head - Hours est at 6800. Only 200 hours on factory reconditioned hydraulic motors and pumps.

Comfort cab with working air.

28L tires with chains at 50%.

Saw head has side pocket for

1995 Timbco T445 w/Quadco 22”head Item ID: 12346 Contact: Daren/Michelle 800.315.9950 Ext. 603 www.LBXonline.com

cutting larger trees. Very well maintained machine. - Item ID12072 - Tom 800-315-9950 x604 1996 BARKO 275B - 6BTA Cummins Engine, 52” Rotobec Grapple - Item ID-12076 Daren 800-315-9950 x603 1996 JD770BH Motor Grader - 7720 Hours; s/n DW770BH557633. 12’ Blade;

P.O. Box 170 • Prentice WI 54556-0170 • 800-243-5438

www.multitekinc.com • sales@multitekinc.com

Multitek Firewood Processors Increase Your Productivity and Profitability • Quality Equipment to Reduce your Labor Costs • Circular Saw or Bar & Chain Models • 7 Models to Choose From • Production Ratings up to 5.5 Full Cords Per Hour

Made in the U.S.A.

16 n

November 2011

Visit us online at www.LBXonline.com!

Enclosed Cab

The Blackstone Beaver Components

• Operator comfort in the enclosed cab • Dual joystick controls ease hand fatigue

• Dual joystick controls ease hand fatigue

Out-feed Conveyor PLC controls

• • • •

built in the USA with industry standard components. Hydraulic systems built with high quality Parker hoses and hose ends.

and electronic valves reduce operator error and optimize speed.

PLC controls and electronic valves reduce

Control conveyor hydraulically from cab Conveyor hydraulically folds for transport Cleated belt holds wood securely 4" cleanout area allows small debris to fall

Size

eaver

lackstone

eaver

I

Control conveyor hydraulically from cab Conveyor hydraulically folds for transport Cleated belt holds wood securely 4" cleanout area allows small debris to fall

lackstone

I

Out-feed Conveyor • • • •

The Blackstone Beaver Firewood Processor is built in the USA with industry standard components. Hydraulic systems built with high Enclosed Cab The Blackstone Beaver Components quality hoses and hose ends.Beaver Firewood Processor is • Operator comfort in theParker enclosed cab The Blackstone

Firewood Processors

operator error and optimize speed.

Firewood Processors

Size Maximum log length is 25' with a 24" diamat-

er. Cut length adjustable up to 24" long.

Maximum log length is 25' with a is24" diamatSplitting head can be adjusted by up to 10" er. Cut length is adjustable to 24" for up consistent splitslong. on various log diameters.

Splitting head can be adjusted by up to 10" Customization Blackstone Beavers are customizable by for consistent splits on various log diameters.

Customization

the manufacturer. Integrate your ideas into a production machine built to match your requirements! Don’t need a mobile unit, specify a skid-mount.

Blackstone Beavers are customizable by Speed the manufacturer. Integrate your ideas into with a 3-stage The processor comes standard hydraulic pump. All strokes are performed in a production machine built match your highto speed by default, but if greater splitting • Largest hydraulic folding deck in the business force is needed, pressure • Deck folds requirements! into the machine for transport Don’t needincreased. a mobile unit,will immediately be When load is decreased, the high speed stroke will renew. specify a skid-mount.

3-Strand Live Deck

TheLive Blackstone 3-Strand Deck Beaver Firewood

Processor isfolding built indeck thein USA • Largest hydraulic the with business components.

• Deckindustry folds intostandard the machine for transport

Hydraulic systems built with high quality Parker hoses and hose ends.

lackstone

Speed

eaver

• Operator comfort in enclosed cab Customization The processor comes standard with a 3-stage • Dual joystick controls ease hand Blackstone Beavers are customizable by hydraulic pump. All strokes are performed in fatigue the manufacturer. Integrate your ideas high by default,adjustable butP: if(508) greater 478-5902 splitting 123 Uxbridge Road • speed Comfortable, seat F: (508) 321-9876 Mendon, MA 01756into a production machine built to match force needed,controls pressure will immediately be your requirements! Don’t need a mobile • isJoystick increased.

When load is decreased, • Engine controls inside cabthe high unit, specify a skid mount. speed stroke will renew.

I

The Blackstone Beaver Components

Size Maximum log length is 25’ with a 24’ diameter. Cut length is adjustable up to 24” long. Splitting head can be adjusted by up to 10” for consistent splits on various log diameters.

lackstone

eaver

I

JD 6076 Engine. Very well maintained. Runs strong.

Excellent price. - Item ID12313 - Tom 800-315-9950 x604 1996 Timberjack Forwarder - Timberjack forwarder, runs strong, good machine. Double bunk, extenda boom, 43” wide tires - Item ID-12364 - Michelle 800-315-9950 x603 1997 Barko 160C Knuckleboom Loader on Trailer - Nice loader. Cummins 6 Cyl engine. 8400 hours.

Pitts trailer. Standard lever controls. Rotobec 4642 continuous grapple. - Item ID12229 - Tom 800-315-9950 x604 1997 CATERPILLAR D5H TSK II - 6330 hours, 6/Way Dozer, Canopy w/Sweeps, Winch, Esco Single Function Grapple :U/C 60% approx., Pads 22in SBG R/P/B 50% SEGS 50% BAL,50% Track Guards : Front/Rear/ Side Screens, Grapples w/Ext, shipping dimensions weight 43,000lbs HEIGHT 10ft 5in LENGTH 17ft 10in WIDTH 8ft 9in - Item ID12012 - Daren 800-315-9950 x603 1997 CLARK 666 Dixie Special - Grapple, winch, heat and air, Cummins 6BTA 6cyl engine, 177HP, 80” Grapple, Grapple fully open is 10’ from the outside edges. This machine is in excellent condition and is a must see, it has approx.

5000 hours, center pins are in great shape, Tires are very good rears are 98% and fronts are 85%, Don’t let this machine pass you by!!! - Item ID-12137 - Daren 800-315-9950 x603 1997 IH 4000 Truck with Prentice Loader - 6 Cyl. Diesel engine; 26000 GVW. Used as yard machine. Loader runs and lift good. - Item ID-12261 Tom 800-315-9950 x604 1997 MACK CL713 with 18ft Petty built Pup trailer - 1997 Mack CL713 EZ427 replacement engine with 220k in Dec. 09, NEW! 18sp tran replaced by Mack Dec.08, 120C Prentice Loader, 22.5FT Rack, with Petty Built Pup Trailer (18.3ft).... Drive tires

P: (508) 478-5902 F: (508) 321-9876

123 Uxbridge Road Mendon, MA 01756

Speed The processor comes standard with a 3-stage hydraulic pump. All strokes are performed in high speed by default, but if greater splitting force is needed, pressure will immediately be increased.

When load is decreased, the high speed stroke will renew.

Featuring: Exclusive Split Belt, Stand Alone Conveyor Featuring our exclusive split belt design stand alone conveyer.

We customize any length and option available!

Call today for more information!

(508) 478-5902

www.blackstonebeaver.com are at 40% and ster tires are rated at 50-60% Price : 35,000 USD - Item ID-12130 - Daren 800-315-9950 x603 1997 Morbark Model 1300 Tub Grinder - Simply an older unit

in EXCELLENT CONDITION! Only 5543 Hours. One owner.

A fraction of the price of new, yet this is ready to take on the tough material reduction jobs. Stumps, pallets, wood

For Classifieds Call Your LBX REP at 1-800-315-9950

waste....this machine will reduce into usable material.

Self contained with loader and operator’s cab with AC and Heat. All functions run well.

Just a great value. - Tom 800-

The Original Lumberman’s Exchange n 17

For Firewood Production - Take Your Pick

The Dyna

SC-14 SC-16 or

Both Give you High Production in an Affordable and Profitable Processor The SC-14 (pictured) Offers

• Low Initial Investment • Powerful Hydraulic Operation • Flexible Power Options – PTO, Gas or Diesel • Large 12’ x 14” (18” Max) Log size • Easy to Operate Controls • Pull with any pickup!

• Sets up Fast!

• Production from 1.5 – 3 full cord per hour!*

Packed and ready to go!

*Production rate may vary based upon log size, quality, power source used and operator skill.

toll free: 1.888.820.3962 local: 231.734.4433 fax: 231.734.3681 6228 60th Avenue, Evart, MI 49631

12 Years of Building Quality Machines!

Call the Dealer Nearest You!

DYNA Portable Sawmills

18 n

November 2011

Shell Forest Products, Harrodsburg, KY

Marty Shell 859.325.3694

Great Lakes Firewood, Twin Lake, MI

Dennis Blankenship 231.206.4073

Sensenig Repair, Mio, MI

Dennis Sensenig 989.848.8346

Warrick Hallet Carpentry, Glencoe, MN

Warrick Hallet 320.864.4340

PDG Sales, Medina, NY SC-16 Demo Model Available

Philip Graber 585.798.2969

North Country Hydraulics, Potsdam, NY

Ben Deschaine 315.842.0388

Riehl’s Sawmill Sales, Lykens, PA

Amos Riehl 717.365.3852

Lickity Split Firewood Equip., Stetsonville, WI

Clayton Szydel 715.550.1077

Timberline Landscape, Davis, WV

Bill Mollard 304.940.0749

Visit us online at www.LBXonline.com!

2000 Mack CL713 Tri-Axle Item ID: 12357 Contact: Daren/Michelle 800.315.9950 Ext. 603

www.LBXonline.com

WOW!

2008 Valmet 890.3 20-Ton Forwarder Low hrs. Tracks!

Item ID: 12263 Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com 315-9950 x604 1998 Barko 160D Loader - s/n 22409 6cyl Cummins engine, Lever controls, Continuous rotation grapple. Trailer and delimber are not included Item ID-12207 - Daren 800-3159950 x603 1998 Cat D4 Grapple Dozer - D4HTSKII Cat w/ Esco Grapple. Serial#TSK1990...

Unit has 3600 hrs. good undercarriage grapple and winch. LGP pads. Runs well.

Goes where skidders can’t.

- Item ID-12324 - Tom 800-3159950 x604 1998 PRENTICE 310E Machine is ready to work, overall condition “GOOD” Item ID-12033 - Daren 800-3159950 x603 1998 Tigercat 240 Tracked Loader - 9550 Hours. 32’

Reach. Rotobec continuous grapple. Strong Machine.

Works well. New Cummins 6BT engine in last 500 hours.

Cab riser for high stacking.

Clean cab with AC. - Item ID12242 - Tom 800-315-9950 x604 1998 Valmet 911.1 Harvester - Single Owner machine.

Super Clean and ready to go to work. 10,200 hours. All regular maintenance done consistently. Tires at 75%.

Sisu Engine uses less than 4 gal/hr. Slide Boom design easy to learn and operate. - Item ID12338 - Tom 800-315-9950 x604 1999 CAT 330 with Bucket & Thumb - Estimated 4500 hours. 40% undercarriage.

Final Drives and Drive Motors just replaced. 42” Bucket with Fixed Thumb and Stump Ripper. S/N 6BR03006. Some cosmetic damage. Engine runs good. Cab clean with working AC and heat. - Item ID-12250 Tom 800-315-9950 x604 1999 CBI Model 4800 Grinder 1680 Hours: Twin Disc Clutch; Flex reversible fan, Remote control, Weight 93,000 lbs., Tires 445/65R22.5, New teeth, Updated hammers, Full engine service just completed; Cat 3412 engine w/12 cylinders; Ready to go to work; Very good condition - Tom 800-3159950 x604 1999 Hydro-Ax 611 EX Cummins (Recon) DR1477RX SN: 60301916 HP: 215 CYLINDERS: 6 HOURS on new engine: 7613 total hours, AIR CONDITIONING, PAINT: Fair, BODY: Good GLASS: Fair, tire size 67 x 34-26 CONDITION: All good, Hydro-Ac side cut head. - Item ID-12195 - Daren 800-315-9950 x603 1999 Prentice 410E Loader with CTR Delimber - 5166 hours, The paint is in fair condition all around, The glass inside the cab is missing from the sliding glass window, and also the glass in the door is cracked. The interior is in poor condition, the majority of the problem being the windows. - Item ID-12191 Daren 800-315-9950 x603

CARDINAL WIRELESS, Inc. 5775 Park Plaza Ct. Indianapolis, IN 46220 317 577 9944 www.cardinal-wireless.com

FREE shipping for minimum 3 units

GPS TRACKING

TWo-WAy RADIoS

for Truck Fleets

Up to fifteen miles of loud, clear range and NO airtime charges.

GATEGUARD®

Remote Gate Control and Radio Communication

For Classifieds Call Your LBX REP at 1-800-315-9950

ASSET TRACKING

for Construction Equipment, Generators, Trailers and Rental Equipment

HEADSETS

for Hearing Protection

Call today for more information:

800-332-3268

www.cardinal-wireless.com

The Original Lumberman’s Exchange n 19

P O R T A B L E

[

S A W M I L L S

•

I N D U S T R I A L

S A W

M I L L S

•

B L A D E S

&

B L A D E

M A I N T E N A N C E

]

800.553.0182 woodmizer.com

n uctio e d o r anc est P High t Mainten !! s d!

Lowe rantee Gua

Trailer:

Tandem axle, 8’6” wide, 22’-30’ long, 11’8” high, 5-7 tons, Electric brakes.

Saw:

Superior Carbide Slasher - Cut wood instead of sharpen chains 36” to 60” diameter, 2 ga Carbide Slasher.

Engine:

50 to170 HP or PTO Drive with user’s tractor.

Hydraulics:

Commercial Shearing

Splitter:

35 - 72 tons, 3-5 second cycle time; 2, 4, 6, 8, 10, 12, 14 & 21 way pkg wedge.

Capacity - 4” to 27” Log diameter 0” to 48” Block Length Lifetime warranty on the entire splitter chamber.

Infeed Conveyor:

16” - 30” long Hydraulic powered.

Clean out Hopper: Get rid of bark and wood slivers before being conveyed away.

New Grapple System Now Available!

2040 Rogers Road, Perth, O n ta r i o K 7 H 1 P 9 Canada

www.cord-master.com Email: cordking@cord-master.com

Today!

888-219-9663

The WOODBINE

is the PROFESSIONAL’S

CHOICE!

If you want to know what a Woodbine can do, don’t ask us (or our competition), ASK OUR CUSTOMERS.

• Standard 404 Pitch Saw Chain, with 3/8 Kerf

• Automatic Chain Oiler • UL Approved, Wired to NEMA Standards

Matthew, Alicia and Jaxson Ward “I recently purchased the Woodbine Rapido Loco and I’m very pleased with it’s performance. I looked at other processors and for the quality and output I don’t believe you will find a better one out there. The Rapido Loco is a no-frills workhorse. It’s easy to operate, simple to maintain and quick to set up. The staff at CRD Metalworks is both thorough and experienced and as a family business they provide the kind of support I expect as a customer. I would recommend the Woodbine line-up to anyone looking to purchase or upgrade their firewood mill…(as long as they’re not my competition!)”

— Matthew Ward, Maine, USA

Our competition spends it’s time trying to knock us down.

We spend our time supporting customers like Matthew and his family, who depend on their Woodbine everyday.

We also offer the following: Spare Sawbar (all types) and Repair Center for All Used Bars Saw Chain Loops or Reels • Chain Take-up assemblies

Sering Sawmill Machinery Co., Inc.

(360)

• (360) 687-2917 687-2667 seringmfg@aol.com Phone

1999 Prentice 620 Harvester - Ponsse processing head; New undercarriage; Engine replaced 1000 hours ago. Very strong machine. Good value.

Quebec, Canada - Item ID12134 - Tom 800-315-9950 x604 1999 Tigercat 720B Feller Buncher - 5600 actual hours, Machine has new (crate) engine from Cummins with Machine has new (crate) engine from Cummins with 1293 hours on it. Very good running machine. All Pins & Bushings Tight. Machine operated very well. A/C very cold. Machine is in Alabama Item ID-12181 - Daren 800-3159950 x603 1999 Timberjack 735 Shovel Logger - Ugly but very good machine. Bank Repo. Has sat idle due to court settlement and now can be sold free and clear. 75% undercarriage.

Runs well. Low hours. GREAT PRICE! - Item ID-12311 - Tom 800-315-9950 x604 2000 Cat 550 Harvester w/

Fax

Log Max 840 Head - Very nice harvester with 6500 hours on machine, but only 3500 on 1997 Log Max 840 Processing Head. Cat 3126 engine w/180HP. Tires and Chains at 75%. Unit comes with spare squirt boom and many spare parts for processing head. s/n available on request. - Item ID12349 - Tom 800-315-9950 x604 2000 Sterling Road Truck/ Tractor - Truck has 259 k miles, a N-14 Cummins 370+ engine, 9 spd. trans. 4:10 rears with 4 air bag tandem axle, 24.5 rubber almost new. Runs Great! Includes wet line kit on truck. FOB: NC - Item ID-12323 - Tom 800-315-9950 x604 2001 Cat D5C XL Dozer - Only 2250 hours. Just serviced by local Cat Dealer.

Undercarriage 70%. Open ROPS Cab. 6-way Blade.

Individual no longer needs.

Great price! One owner for general maintenance and clean up of ranch in TX. - Item ID-12382 - Tom 800-315-9950

Call 888-667-8580 today for the real Woodbine experience.

17 Hyde Hill Road, Williamsburg, MA 01096 Email: sales@crdmetalworks.com

Firewood Processors

Performance, Power & Profit

ALL MACHINES NOW FEATURING PUSH BUTTON, FAST CYCLE SPLITTER STANDARD!

Motivated Seller

Williams 200hp Hammermill Grinder 350 Hog Item ID: 12011 Contact: Daren/Michelle 800.315.9950 Ext. 603

1990 CAT D4 Grapple Dozer Great for steep terrain!

Item ID: 12324 Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com

www.LBXonline.com

x604 2001 JD 644H Wheel Loader - Very Clean Machine. 5400 hours. 624 H John Deere; 160 HP Diesel; A/C and heat; Single lever control; Front Hyd Ride control; L-3 20.5x25 Tires; Battery Disconnect; Front and rear fenders; Tires at 60%. Well maintained. Runs good. Strong engine. - Item ID12379 - Tom 800-315-9950 x604 2001 Komatsu PC200LC6C - 2816 Hours. Bucket and

thumb. 36” triple grouser pads. Very nice machine. One owner. - Item ID-12322 - Tom 800-315-9950 x604 2001 MCB 621REG Trommel Screen with Radial fines conveyor - This is a 2001 MCB 621REG. Radial fines conveyor, fixed overs conveyor, tipping grizzly bars, radio remote. It has just over 8,200 hours, has had the drum replaced, has new rollers, and a new belt and it

For Classifieds Call Your LBX REP at 1-800-315-9950

The Original Lumberman’s Exchange n 23

Loaded!!!

2010 Valmet

CAT Dozer D4E w/Winch

Yes! It’s a 2010! Less than 1,000 hrs.

Item ID: 12369 Contact: Daren/Michelle 800.315.9950 Ext. 603 www.LBXonline.com

860.4 Forwarder

Item ID: 12351 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

was just sand blasted, painted and has all new decals. Also, one of the grizzly tipping cylinders was just replaced, and other work has just been completed. The machine runs great and is ready to go to work - Item ID-12358 - Daren

24 n

November 2011

800-315-9950 x603 2001 Prentice 384 Knuckleboom Log Loader Cummins 6BT 5.9L engine, joystick control, enclosed cab, delimber, saw package hook ups. - Item ID-12212 Daren 800-315-9950 x603 2001 RotoChopper MC166 2001 RotoChopper MC166, Cat 3406 engine, 460 hp, approx.

8700 hours, coloring unit, magnetic roller, this machine has been used for gringing pallets. - Item ID-12378 - Daren 800-315-9950 x603 2001 Timbco 445D with Quadco Sawhead - 10,560 hours. Runs good.

Undercarriage 50%. 540 degree non continuous rotation on upper. Quadco 22” saw with continuous rotation.

- Item ID-12288 - Tom 800-3159950 x604 2002 John Deere 435 Knuckleboom Log Loader - 2002 John Deere 435 Knuckleboom Log Loader, Joystick control, saw package hookups, delimber. - Item ID12215 - Daren 800-315-9950 x603 2002 John Deere 648G III TC Grapple Skidder - 2002 John Deere 648G III TC Grapple Skidder, Dual arch, Torque converters, winch, 30.5-32 tires - Item ID-12293 - Daren 800-315-9950 x603

2002 John Deere 648GIII Dual Function Grapple Skidder 2002 John Deere 648GIII Dual Function Grapple Skidder, 9700 total hours, 3000 on Reman. engine, Reman. transmission 6000 hrs.

30.5x32 tires at 60%. MAchine is working daily. - Item ID12231 - Daren 800-315-9950 x603 2002 Timberjack 608s with hot saw - 2002 Timberjack 608s with hot saw, approx. 6000 hours, Machine is in very good shape and has been well maintained. - Item ID-12194 Daren 800-315-9950 x603 2002 Vermeer Horizonal Grinder Model HG365 - 2002 Vermeer Horizonal Grinder Model HG365, Cummins Engine, 365 HP, 20” capacity, New belt, New teeth, New floor plates - Item ID-12372 Daren 800-315-9950 x603 2003 Cat 525B S/A Skidder Good condition. 10,500 hours.

New Transmission. Recent

Visit us online at www.LBXonline.com!

40k Below Market!

2010 Valmet/ Timbco 430 FXL w/Quadco 2900 Item ID: 12350 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com work done. Runs well. CA - Item ID-12189 - Tom 800-3159950 x604 2003 Franklin Q70 Grapple Skidder - 2003,Model Q70M31A,Enclosed Cab W/Heat & A/C,28Lx26 Tires 85% Rear,70% Front, 100 Hours On Dealer Rebuilt Transmission, 600 Hours On Cummins Recon Engine 6BTA 200 H.P. Winch and Grapple. Excellent one owner machine! - Item ID12337 - Tom 800-315-9950 x604 2003 ROTOCHOPPER CP118 - 2003 Rotochopper CP118 Portable wood chip processor with coloring unit. This machine runs good but has an electric problem it keeps flipping the circuit breaker for the conveyor and auger Sold at this price As Is needing work to electric has extra screens, 2” screen. Will produce 35 - 40 yards per hour Price : 40,000 USD - Item ID-11973 - Daren 800-315-9950 x603 2003 Timbco T445-D w/ Quadco 2800 Saw Head 4400 Hours; Quadco 2800 Intermittent Head with 360 degree rotation. Head has new disc and saw motor. Lower has 28” pads. Undercarriage needs pins, bushings and rails and then should be good for 5000 more hours. One owner who maintained very well. Idle for over a year, but is started every week and

50” Heavy Duty Log Trough

Item ID: 12383 Contact: Daren/Michelle 800.315.9950 Ext. 603 www.LBXonline.com

cycled. Cummins 260HP. - Item ID-12320 - Tom 800-315-9950 x604 2003 TimberPro Model TS 620 Six-Wheeled Grapple Skidder - 4990 hours, Cummins motor, 6WD. Has 400 hours on rebuilt engine, New ECM; New drive pump; New tires. Excellent condition; Great Value. Perfect for long hauls or handling big loads. Rear bogey tracks included. - Item ID-12254 Tom 800-315-9950 x604 2004 72” CSI R72 Circle Saw - hydraulic. 20’ deck. Sold without the blade. New blade is additional $3500. Was over $40,000 new, 2 years ago. machine needs a new blade, 1500 hrs, it was used to cut logs Price : 17,000 USD - Item ID-12125 - Michelle 800-3159950 x603 2004 Barko 375A Loader on Rough Terrain Carrier Mounted on rough terrain carrier. 40’ boom, hydraulic tilt cab, engine covers are hyd raised & lowered. 7209 hours.

Rotobec continuous grapple.

Very nice machine. - Item ID12380 - Tom 800-315-9950 x604 2004 Barko 395 on SP Carrier - Very Clean Machine. 8800 hours. Mounted on Big John Self Propelled Carrier. JD 6.9 Powertech Engine. Rotobec 4547 Grapple. 35’ Reach with heel bar. Comfort Cab with Heat/AC/Stereo. Nice yard machine. - Item ID-12278 - Tom 800-315-9950 x604 2004 Hood 28000 Loader with

hotsaw - Year model 2004; 72” hot saw; has 8000 hours.

- Item ID-11418 - Michelle 800315-9950 x603 2004 Hydro-Ax 570 Feller Buncher - 9405 Hours. S/N HA18599. Cummins 205HP Engine. Hydrostatic drive.

Hydro-Ax bunching saw head with side cut feature. New 30.5 x 32 tires. New engine 2500 hours ago. New Gear Box 2500 hours ago. New saw disc.

Runs well. Ready to go. - Item

For Classifieds Call Your LBX REP at 1-800-315-9950

ID-12316 - Tom 800-315-9950 x604 2004 JD 648GIII Single Arch Grapple Skidder - Well maintained; 8200 hours engine rebuilt at 7100 hours; Price reduced to allow for new tires for buyer; Pulls strong. Motivated Seller. You can watch the video of the machine at http://www.youtube.com/ watch?v=EPihTGAbkNQ - Item ID-12067 - Tom 800-315-9950

Reconditioned Electrical Equipment Saves You Money, Big Money!

VFD Control

We Buy, Sell, or Rent— Used, Obsolete and Hard to Find Industrial Electrical Equipment

Many Items In Stock Ready for Immediate Shipment!

Automatic Reduced Voltage Starter

All Sizes of Motors

Manual Transfer Switch

Combination Starter

When you need it Now— And at the Best Price!

You Need Weaver Electric Motor Control Starters (Solid State)

Disconnect Switch

Call Today!

Toll Free 800-257-0038

Ph: 303-288-0746 • Fax: 303-288-0218 6591 N. Washington, Denver, CO 80229 Web: www.weaverelec.com Email: spark@weaverelec.com

The Original Lumberman’s Exchange n 25

CLEEREMAN AUTOMATIC CARRIAGE Your Most Profitable Sawmill Investment.

12 MOdELs

Why has CleeremAn Sold over 900 Carriages?

The Answer is Simple...

A CArriAge To FiT Your operATion!

QUALITY & SERVICE!

CARRIAGE DRIVES

50HP - 400HP Hydraulic, Hydrostatic and Electric

CLEEREMAN • • • • • •

Not JuSt CarrIageS & DrIveS!

The Sawmill Industry's Premier Bar Type Log Turner Hydraulic Power Units Track Frames, Husks & Sub Structures Sawyers Cabs & Custom Built Control Cabs Airbag & Hydraulic Cable Tensioners All Types of Material Handling Equipment

3500 lbs.

All Machines are Cleereman Quality Throughout.

You Get the Best Machines Backed by the Top Service in the Industry – Call Cleereman Today!

2500 lbs.

info@cleereman.com www.cleereman.com

PHONE: 715-674-2700 FAX: 715-674-7002

5500 PINE ST., NEWALD, WI. 54511

26 n

November 2011

Visit us online at www.LBXonline.com!

CAT Excavator Model 235 Item ID: 12371 Contact: Daren/Michelle 800.315.9950 Ext. 603

www.LBXonline.com

1984 John Deere 540B Skidder Runs good!

Item ID: 12343 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

x604 2004 JD/Timberjack 608S w/ Waratah 622 processing head - 6809 Hours. One owner.

Rebuilt undercarriage, now at 50%. Waratah 622 can have top saw added. Good condition. Forestry Package.

Serial numbers available for both machine and head. LA - Item ID-12161 - Tom 800-3159950 x604 2004 Peterbuilt 357 Log Truck with Pup and Loader - Super Clean rig ready to roll. Peterbuilt has Cat C-15 engine and only 159,000 miles. Includes 2000 Model Pitts Pup Trailer. Loader is 2004 Prentice 124 w/ Rotobec Grapple installed

by Huber Bros. Installation includes Oil Tank/Cooler in Headache rack. Cat 18 speed Transmission. 20,000

lb Fronts; 46,000 lb Rears.

One owner. You won’t find a cleaner truck. - Item ID-12368 Tom 800-315-9950 x604 2004 Prentice 384 TMS Loader Package - 10,145 Hours; CTR 450 Delimber; John Deere engine. Runs good. Working on job today. Good condition.

TN - Item ID-12171 - Tom 800315-9950 x604 2004 Valmet 425 Ex-10 Harvester - 4700 hours: Timbco self leveling carrier with Cat D6 side frames; Long reach harvesting boom of 35’; Valmet 360 harvesting head is fast and efficient; Well maintained with service history. - Item ID-12074 - Tom 800-315-9950 x604 2005 John Deere 648GIII Dual Arch Grapple Skidder - approx. 10000 hours, tires are 50-60%, This machine is working daily and is woods ready - Item ID-12330 - Daren 800-315-9950 x603 2005 Prentice Model 410E w/ TMS Package - 2730 Hours; 52” Grapple; CTR Model 450 Pull Through Delimber; Prentice TMS System with III Series Trailer; Very good condition. Well Maintained.

KY - Item ID-12079 - Tom 800315-9950 x604 2005 Valmet 860.1 8-Wheeled Forwarder - 10,900 hours. New hydraulic transmission. Good

condition. Sisu engine uses 4 gal/hour. 16 ton capacity.

Tracks for front and back.

Blade on front and hood guard. - Item ID-12267 - Tom 800-315-9950 x604 2005 Valmet 941 Harvester with TWO 370.2 Heads The largest of rubber tired

harvesters. 15,000 hours, very well maintained and working today. Good condition.

INCLUDES TWO Valmet 370.2 harvesting heads. Long reach, leveling cab, and tracks for front bogeys make this a great value. Customer including Low Boy Trailer for legal

Over 20 years in Business

DVDs Available

(8 Models)

10', 20' and 30'

For Classifieds Call Your LBX REP at 1-800-315-9950

The Original Lumberman’s Exchange n 27

BANDSAW BLADES

We have the most popular sizes in stock & ready to ship from major manufacturers, including…

We also offer expert Sharpening Services, plus…

Gang • Edger • Scragg Trim • Split • Strob …and

just about any Custom Saws you need to keep you cutting longer… for less!

Welded to your lengths!

Call Marvin Miller for a quote 231-924-5953 • (fax) 231-924-6166 • 11606 Brickyard Rd. • Holton, MI 49425

2004 Hood 28000 Loader w/Hotsaw

Iron Mule 4500

Item ID: 11418 Contact: Daren/Michelle 800.315.9950 Ext. 606

Item ID: 12365 Contact: Daren/Michelle 800.315.9950 Ext. 603

www.LBXonline.com

www.LBXonline.com

Comin gS 4 New oon Mode ls

Beaver Model 18

28 n

November 2011

transport. - Item ID-12265 Tom 800-315-9950 x604 2005 Valmet/Timbco 415 Harvester with 370E Head Very nice unit. 6900 hours.

370E Harvesting head just added 18 months ago and only has 1500 hours. 36” Triple Grouser tracks. Sisu engine that is very stingy on fuel. 8’ squirt at end of boom for 30’ reach. Reversible fan and auxiliary oil cooler. - Item ID-12266 - Tom 800-315-9950 x604 2006 Barko 495 Crawler Loader - 48” Hydraulic Cab Riser; 32’ reach; Totally gone through with new pins bushings and engine service.

9463 hours. Undercarriage is 90% with 28” pads. Has delimber and bar saw slasher hydraulics. - Item ID-12102 Tom 800-315-9950 x604 2006 GT25 Gyro Trac Refurbished undercarriage at 80% with new tracks and new set of cutter teeth, this machine is work-ready. 773 hours on Cummins 230HP diesel, overall good condition.

Pressurized cab, winch, ROPS. - Item ID-12268 - Tom 800-3159950 x604 2006 JD 548G III Single Arch Grapple Skidder - s/n 600347, 5700 hours, Tires are 50%, Machine is tight, dry, and woods ready!!! - Item ID-12331 - Daren 800-315-9950 x603 2006 JD 700J Dozer with Winch - Very clean dozer with winch and low hours of 1869.

Enclosed cab with comfort package. Runs strong and is

priced to sell. Excellent value and worth a look. NC - Item ID-12101 - Tom 800-315-9950 x604 2006 JD 748GIII Dual Arch Skidder - Approx 8400 hours; Very well maintained; 30.5 tires at 40%; Sweda axles; Winch. Unit working everyday. - Item ID-12117 Tom 800-315-9950 x604 2006 JD 848G Skidder - 5055 Hours. 30.5 Tires at 75%, but one tire at 30%. One Owner.

Excellent condition due to great maintenance. Great price. Shop other similar units. This is clearly best value! - Item ID-12327 - Tom 800-315-9950 x604 2006 JD650-J Dozer with Winch - 2832 Hours. S/N T0650JX129263. Open Cab. JD 4.6 liter engine with 98HP. ROPS, Sweeps, Screens, 8’9” 6-way Blade, Winch w/ cable, 18” Pads. Undercarriage at 90%. Machine is very clean.

One owner. Runs great.

Road clearing, landing site maintenance, general dirt work, this unit is a great choice and great value! - Item ID-12317 - Tom 800-315-9950 x604 2006 Lamtrac LTR7230 with New FAE 175 mulching head - Only 522 demo hours, this machine still carries a warranty from the MFG. Equipped with Cummins C8.3 - 230HP. FAE Head is Brand New and has ZERO hours!

It replaces the head in the photo. Weight is 26,000 lbs giving it a very light 4.42PSI

Visit us online at www.LBXonline.com!

Heavy Duty Forks At Big Savings 1-1/2” thick x 10” wide x 48” long . . . . . . . . . . . . . . . . . . . . . . . . $2,600.00 pair 2” thick x 6” wide x 48” long . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $835.00 pair 2-1/2” thick x 6” wide x 48” long (Surplus) . . . . . . . . . . . . . . . . . . $1,100.00 pair 2-1/2” thick x 6” wide x 48” long . . . . . . . . . . . . . . . . . . . . . . . . . $1,205.00 pair 2-1/2” thick x 6” wide x 60” long . . . . . . . . . . . . . . . . . . . . . . . . . $1,365.00 pair 2-3/4” thick x 6” wide x 72” long . . . . . . . . . . . . . . . . . . . . . . . . $2,500.00 pair 3” thick x 7” wide x 60” long . . . . . . . . . . . . . . . . . . . . . . . $2,495.00 pair 3” thick x 7” wide x 72” long . . . . . . . . . . . . . . . . . . . . $2,825.00 pair 3” thick x 7” wide x 96” long . . . . . . . . . . . . . . . . . $3,530.00 pair

2000 CAT 550 Harvester w/

Log Max 840 Head

Item ID: 12349 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

■ In Stock ■ Same Day Shipment ■ Let Us Quote Your

Special Design Forks.

Very Competitive Pricing.

Above forks have capacities from 12,000 lbs. to 30,000 lbs. per pair.

3-1/2” thick x 8” wide x 60” long . . . . . . . $3,595.00 pair 3-1/2” thick x 8” wide x 72” long . . . . . . . $3,990.00 pair 3-1/2” thick x 8” wide x 96” long . . . . . . . $5,025.00 pair Also, 4”, 5”, 6” thick forks to 168” long.

Made from one piece of steel - not welded. Quality recognized world wide.

1997 Morbark Model 1300 Tub Grinder Handle your wood waste!

Item ID: 12340 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

ground pressure. Superior traction and stability through Lamtrac’s unique quad track/ double articulated platform.

Priced well below dealer cost.

This is a bargain from the manufacturer that won’t be seen again. See more at www. lamtrac.com. - Item ID-12353 Tom 800-315-9950 x604 2006 Morbark Hurricane 18 Chipper - Super clean chipper.

1050 hours. Strong engine.

Great condition. Ready to go to work! - Item ID-12240 - Tom 800-315-9950 x604 2006 Peerless Open Top Chip Trailer - One (1) Peerless Straight Floor - Open Top Chip Trailer 2006 Year Model - Serial#: 1PLE045206 PJ54716 Model 45 CST - Top Henge Rear Gate 11R 24.5 Tires Steel Disc Wheels - Good

Bay Equipment Co. / (616) 392-1811 P.O. Box 1919 / Holland, Mich. 49422 • Fax (616) 392-6238

email: bay.eq.co@gmail.com • www.bayequipmentco.com Floor Spring Suspension Reyco 50% Tires - New Brakes - Item ID-12342 - Tom 800-3159950 x604 2006 PRENTICE 384 mounted on a Mack Truck - 4600 hours, has been on a yard since 2006 Price : 80,000 USD - Item ID12008 - Daren 800-315-9950 x603 2007 Case 1150K Dozer - 2565 Hours on very strong dozer.

Case 130HP engine. Open ROPS cab. 24” pads; Rock Guards; Canopy Brush Guard; Hydraulic PTO; Runs strong and priced to sell. - Item ID12348 - Tom 800-315-9950 x604 2007 Cat 325D w 624 Waratah Processing Head - 7800 hours.

Very clean machine. Head updated. Unit is working today. 34” Triple Grouser Pads. Great landing machine.

- Item ID-12283 - Tom 800-3159950 x604 2007 JD 643J Feller Buncher w/Bunching Hot Saw - Very Clean Unit with 7921 hours.

Original owner with excellent maintenance records. Tires

at 70%. John Deere bunching head recently rebuilt - Item ID12279 - Tom 800-315-9950 x604 2007 Kodiak Kutters Model B425 - Great condition with just 2500 hours. FAE Mulching Head Model 500-U. Cat C-13 engine with 425HP. Tracks at 50%. Serviced and ready to work. Compare this price.... it’s below wholesale! - Item ID12345 - Tom 800-315-9950 x604 2007 Lamtrac Model LTR6125 Mulcher - NEW TRACK MULCHER W/ MAGNUM HEAD & WARN WINCH, 14 hours.

The multipurpose LTR6125 offers the possibility to install an array of attachments to fit all your needs. Easily changing from a Mulcher to a Brush Cutter, Root Rake, or Dozer Blade, the LTR 6125 can get the job done quickly and efficiently without the hassle of having 4 machines to do one job... the LTR6125 does it all! Complete MFG Warranty included. - Item ID-12166 Tom 800-315-9950 x604 2007 Tigercat 234 Loader w/

For Classifieds Call Your LBX REP at 1-800-315-9950

Slasher - Very clean unit with just 4600 hours. Powerful with Cummins 173HP engine. 32’ Reach. Tigercat continuous rotation grapple. CSI DL4400R reversible sawbuck. Mounted on Pitts trailer. Comfort cab with AC/Heat/Stereo and Satellite Ready. Less than half the price of new and in excellent condition. - Item ID12347 - Tom 800-315-9950 x604 2007 Tigercat 250 w/2011 Log Max 7000XT - 7500 hours on Tigercat. 700 hours on new 2011 Log Max 7000XT head.

New pump for head. 36” Triple Grouser pads on 60% undercarriage. Cummins 6 cyl engine. Smooth and powerful machine. Log Max head can do multi-stem delimbing (see photos). Owner closing down job. Below market price. Item ID-12366 - Tom 800-3159950 x604 2007 Tigercat 630C Skidder - Very clean unit. S/N on request. Tires at 60%. 6519 hours. Big capacity grapple.

Tight and ready to work. One

The Original Lumberman’s Exchange n 29

PIPER’S Saw Shop

CAT 988B Loader

Item ID: 12375 Contact: Daren/Michelle 800.315.9950 Ext. 603

5 7 0 6 • 5 4 8 800 •

www.LBXonline.com

Promotional Pricing Offer

Simonds Red Streak Hard Back 1-1/4” x .042 x 3/4” or 7/8” Length 13’2”

$14.71 $14.27 each Tell us you saw it here!

L im it e d T im e O n ly

2007 Case 1150K Dozer Very nice machine!

Item ID: 12348 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

owner machine. - Item ID12275 - Tom 800-315-9950 x604 2008 Lamtrac Model 8290 Quad with FAE 300-U Head - Only 1200 Hours on this amazing land clearing machine. Super light foot print allows this machine to go where no other can and climb where no other machine dares! Cummings 290 HP provides maximum power to the head for best performance in its’ class.

Very low ground pressure of 3.97 PSI. Weighs 36,000 lbs.

Operator comfort is second 30 n

November 2011

to none. Safe and easy to maintain. This unit is priced well below wholesale. See www.lamtrac.com for videos and specifications. - Item ID12354 - Tom 800-315-9950 x604 2008 Morbark 3800 Wood Hog - Super Clean machine!

Only 3064 hours. Very well maintained. S/N 189-1033. JD 600 HP Tier 3 Engine. Remote control. Mag End Pulley.

Hydraulic Fan. Break away mounts. PT Tec Wet Clutch. 3” Hex Screens. - Item ID-12277 Tom 800-315-9950 x604 2008 NEW Lamtrac Model

8290Q Mulcher/Right of Way Clearing Machine - New 2008 w/15 demo hours and FULL FACTORY WARRANTY. Cummins QSC 8.3 Tier III 290HP; Rexroth Hydraulics; Berco undercarriage; Weight - 36,000 lbs (with head); 3.7psi ground pressure ROPS/ FOPS/OPS certified cab with premium comfort package. Its ingenious four track, double articulated design enhances maneuverability while maximizing traction. Goes ANYWHERE! Best in class! TX - Item ID-12146 - Tom 800-315-

9950 x604 2008 Prentice 2764 w/ Rotary Axe Brush Cutter Super clean machine with only 1480 hours. Excellent condition. Great right of way maintenance machine. Comes with optional Prentice Hot Saw for tree felling. Customer must sell. - Item ID-12239 Tom 800-315-9950 x604 2008 Terex PT100 Skid Steer with Mulcher & Bucket Customer never used. Only 38 hours. Complete package: Brush bucket with hold down arms, Forks, and Tushogg HD Mulcher. New condition.

Nothing more to say. Fantastic value. Located near San Antonio, TX - Item ID-12188 Tom 800-315-9950 x604 2008 Timbco/Valmet 445FXL with Quadco 22” Saw Head - Latest Model of Tracked Feller Buncher from Valmet with Heavier Komatsu undercarriage. 5300 hours.

Excellent condition. 28” double grousers. Leveling cab. 360 degree rotator on

Visit us online at www.LBXonline.com!

Quadco saw head gives great flexibility in production.

Customer selling due to job changes. Great value! - Item ID-12119 - Tom 800-315-9950 x604 2008 Valmet 890.3 20 Ton Forwarder - 5200 Hours.

Excellent Conditon. 8-wheeled with Eco Tracks for all bogeys. Best Price on Market!

Customer ready to sell. Tires at 50%. Sisu Engine uses about 4 GPH! Front Blade.

Hood Guard. One owner machine who took great care.

- Item ID-12263 - Tom 800-3159950 x604 2009 JD 240DLC w/Denarco DM4150 Stroker - Only 2200 hours. Owner selling out. This unit in MINT CONDITION! Price is what is owed on machine. Buyer may consider taking over payments. One owner of course. Maintained to highest level. This is a great value and will not be on the market long. Not

advertised anyplace but LBX! Note: No Butt Plate, or Measuring System-but can be added by buyer after sale.

- Item ID-12308 - Tom 800-3159950 x604 2009 Log Lift 115Z Foldable Self Loader - Never mounted.

This loader is the highest quality on the market.

Includes Stainless Steel Cab that hydraulically raises 5 feet; Two Section knuckle boom with squirt extension for total of 32’...Longest Reach in it’s class. Lift capacity of 2000 lbs at full reach. Unique foldable ‘Z’ design allows loader to fold up and store totally behind the cab or between trailer and pup without resting boom in front of truck or on load. Out & Down outriggers give maximum stability. Log Lift Loader also weighs 20% less than other loaders in it’s class. Piston pumps give smooth fast cycle times. Cab

Sawmill Exchange North America's Largest Source of Used Portable Sawmills.

Over 800 Ads:

Portable Sawmills, Commercial Sawmills, Pallet and Cutstock Manufacturing, Firewood Manufacturing, Chipping and Grinding, Trimmers, Debarkers, Dry Kilns, Edgers, Resaws, Ripsaws and Gang Saws, Loaders, Moulders and Planers, Sawdust Blowers and Chains, Conveyors/Transfers/Decks/Green Chain, Rolling Stock, and Much More!!

The Place to Sell Your Equipment Call Us for a Free List of Over 800 Ads or to Sell Your Equipment.

800-459-2148 (

)

2006 Peerless Open Top Chip Trailer Item ID: 12342 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

is heated and has joystick controls. A/C can be added.

This is the best you can buy in a self loader. - Item ID-12356 - Tom 800-315-9950 x604 2009 Tigercat E620C Grapple Skidder - Less than 1900 hours; 44” high flotation tires; Excellent condition; Seller shut down job; Save thousands over new 2011 unit. Hydrostatic drive;

P.O. Box 710930 • Houston, TX 77271

Item ID: 12373 Contact: Daren/Michelle 800.315.9950 Ext. 603 www.LBXonline.com

Strongest center section in market. You won’t find Tigercat skidders like this on the market! - Item ID-12106 Tom 800-315-9950 x604 2010 Barko 295ML Magnum with CSI 4400 Slasher - Very seldom does a loader like this come to the used machine market place. Only 160 hours.

Barko Magnum Series with CSI DM4400 Sawbuck. 32’ reach.

Cummins 173HP engine. 4642 Rotobec Grapple. Mounted

MDI probe 2100

Portable Industrial Metal Detector Simple to operate –

just turn on and go!

MDI’s Superior Digital Technology will detect an 8d nail buried 15" into a log!

• Pre-set for maximum sensitivity with adjustable sensitivity control • Microprocessor controlled; eliminates mineral interference from logs or round for maximum detection depths • Bright L.E.D. display indicates signal strength and battery level • Touchpad control allows precision pinpointing of tramp metal

US & Canada

www.sawmillexchange.com

Euclid Dump Truck R-13

P.O. BOX 26440 • EUGENE, OREGON 97402 PHONE: 541-345-7454 • FAX: 541-345-7971 www.metaldetectorsinc.com

“Providing a full range of industrial metal detectors since 1965.”

For Classifieds Call Your LBX REP at 1-800-315-9950

The Original Lumberman’s Exchange n 31

‘04 Timbco 425EXL w/22” Quadco Spotless! One Owner!

Item ID: 12284 Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com on a Pitts 39’ Trailer. Save thousands over new! - Item ID12352 - Tom 800-315-9950 x604 2010 JD 748H Grapple Skidder - Like New Condition. 2100 hours. 30.5 x 32 Tires at 80%. Loaded. Customer lost contract. Save big over new

32 n

November 2011

Rayco Stump Grinder RG1665AC

Item ID: 12374 Contact: Daren/Michelle 800.315.9950 Ext. 603

www.LBXonline.com machine purchase. - Item ID12282 - Tom 800-315-9950 x604 2010 Valmet 860.4 Forwarder - Incredible opportunity if you are looking for a new forwarder! Only 722 hours.

MFG warranty still applies.

This machine is LOADED including the WEBASTO programmable pre-heater!

Includes 2 sets of Eco Tracks; Blade, and Hood Guard.

Owner changing jobs and no longer needs this machine.

Save $50,000 off of new machine! - Item ID-12351 - Tom 800-315-9950 x604 2010 Valmet/Timbco 430 FXL w/Quadco 2900 - THIS IS A NEW MACHINE from any point of view. ONLY 720 Hours!!

Customer changing job plans and will sell at $50,000 off purchase price. Quadco 2900 Intermittent head with 360 rotation. Valmet’s latest FXL design with Komatsu oversized undercarriage. - Item ID-12350 - Tom 800-315-9950 x604 2011 JD Model 748H Dual Arch Skidder - 30.5 x 32 Tires. 600 Hours. Job shut down after buying skidder new in Jan. Save 10% off new and pay no sales tax! - Item ID-12262 Tom 800-315-9950 x604 225A Timberjack Skidder - In ready to work condition.

1986 year model with a 353 Detroit engine. - Item ID-11991

- Michelle 800-315-9950 x603 50’ Heavy Duty Log trough - 2-15/16” Head Shaft, WD 110 Chain, 2 Sets of kickers to kick off either side, 5HP Electric Drive, Owner will will completely refurbish if needed - Item ID-12383 - Daren 800-315-9950 x603 510 International Wheel Loader - Please call for information. Photos coming soon. - Item ID-11990 Michelle 800-315-9950 x603 Barko Knuckleboom - 2006, Model 495 Trailer Mounted, 3800 Hours, FEC Log Pro Buck Saw Included . Like new one owner machine! - Item ID-12153 - Chris 800-315-9950 x600 Cat 518 Grapple/winch Skidder - Late 80’s 4WD Drive; Cat winch, maintained machine.; 30.5 x 32 Tires, 95% rubber. 130-hp, all pins are good. - Item ID-12202 - Daren 800-315-9950 x603 Caterpillar 988B Loader Hours 5228, Caterpillar 3408T Engine - Item ID-12375 - Daren

Visit us online at www.LBXonline.com!

Offers Welcome!

Item ID: 12372 Contact: Daren/Michelle 800.315.9950 Ext. 603

www.LBXonline.com 800-315-9950 x603 1993 Caterpillar D4H Dozer 1903 Hours - PAT Blade, Laser Attachment, Winch, Cat 3304 Engine. Excellent Condition!

- Item ID-12177 - Chris 800-3159950 x600 Caterpillar D6R - with winch, hours 8211, s/n 5LN00696 Price : 75,500 USD - Item ID11906 - Daren 800-315-9950 x603 Caterpillar Dozer Model D4E with winch - 3304 caterpillar engine, power shift, 50,000 lb winch - Item ID-12369 - Daren 800-315-9950 x603 Caterpillar Excavator Model 235 - 1239 hours, 3306 Caterpillar engine, hydraulic thumb - Item ID-12371 - Daren 800-315-9950 x603 Clark 664D Cable Skidder - 5 cylinder 88hp deutz engine, newly rebuilt transmission, new head gaskets, new injectors, new mainline. - Item ID-12221 - Daren 800-315-9950 x603 Deere 335 - 2006, Model 335, 5500 Hours, CTR 426 Delimber, Very good condition, one owner machine. - Item ID-12175 Chris 800-315-9950 x600 Eagerbeaver 20 Ton Trailer 1987 - Tandem Axle, Dual Wheels, 8.25R15 Tires Good, Manual Fold Down Ramps, Very Good Condition! - Item ID-12179 - Chris 800-315-9950 x600 Euclid Dump Truck Model R-13 - Hours 3960, Engine Detroit Diesel - Item ID-12373 -

2007 Tigercat 234 Loader w/ Slasher Item ID: 12347 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com Daren 800-315-9950 x603 Franklin Skidder 2003 Model Q70 - M31A, Enclosed Cab W/ Heat & A/C, 28Lx26 Tires 85% Rear, 70% Front, 100 Hours On Dealer Rebuilt Transmission, 600 Hours On Cummins Recon Engine 6BTA 200 H.P. Excellent one owner machine!

- Item ID-12152 - Chris 800-3159950 x600 Franklin Skidder Model 142 - Hours 7230, Good strong machine, 453 Detroit Power unit - Item ID-12376 - Daren 800-315-9950 x603 Franklin Skidder Model 170PT - New tires, New cable,Hours 6585 - Item ID-12377 - Daren 800-315-9950 x603 Gyro Trac GT25 - Machine has 1278 hours. - Item ID-11801 Michelle 800-315-9950 x603 Haybuster IG-10 Tub Grinder - This 8-ft. tub is powered by a 275 hp CAT engine. This portable tub grinder has 48 swinging hammers and a set of 1” screens. Unit also has new clutch and belts, and the hammers are in good shape.

It was being used to grind green waste but can also be used for processing many types of wood waste. With a pintle hitch for mobility, this machine is ready to be pulled to your site today and put to work. - Item ID-12361 Michelle 800-315-9950 x603 Iron Mule 4500 - Complete Overhauled Engine, Barko 40 Loader w/By Pass Bucket, Tires Like New - Item ID-12365

1994 CAT 518C Grapple Skidder Item ID: 12302 Contact: Daren/Michelle 800.315.9950 Ext. 603

www.LBXonline.com - Michelle 800-315-9950 x603 John Deere 540B Cable Skidder - 23.1-26 tires. - Item ID-12210 - Daren 800-315-9950 x603 John Deere 640E Skidder 1993 year model, 6 cylinder, powershift transmission, no leaks - Item ID-11989 Michelle 800-315-9950 x603 Mack Truck $48,500 - 1998, Model DM Mack Truck, 300 HP Mack Engine; 330,000

‘08 Challenger Grinder Model

CHSP 200-4090

Low hrs., good condition.

Item ID: 12284 Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com miles; 7 Speed Transmission, 46K Rear, 20K Front, Tri -Axle, 22.5 Tires, Like New Log Bed, Truck is in very good condition! Plumbed to take pup trailer. Very well maintained. - Item ID-12178 Chris 800-315-9950 x600 MODEL 1300 SELF CONTAINED TUB GRINDER - MODEL 1300 SELF CONTAINED TUB GRINDER,

Now One Phone Puts You in Touch with the Single Source for all your Sawmill Needs!

Corley Sawmill Machinery Tyrone Berry Carriage Drives Lewis Controls Optimization Carriage Linear & Set Shaft Lewis Controls “Electronics for sawmills by sawmillers” Tyrone-Berry Carriage Drives & Parts • Headrig Slabbers Log Turners • Bandmills & Linebar Resaw Systems Board & Gang Edgers • Trimmers

The Most Complete Line of Sawmill Machinery Since 1905!

Single Machine or Complete Turn-Key Operation More Production & Profit is Only One Call Away For Parts, Service & Sales

Call (423) 698-0284 CORLEY

For Classifieds Call Your LBX REP at 1-800-315-9950

mfg

2002 Vermeer Horizontal Grinder HG365

www.corleymfg.com • sales@corleymfg.com

The Original Lumberman’s Exchange n 33

ROW ELECTRICAL EQUIPMENT, INC. YOUR SOURCE FOR USED, RECONDITIONED:

• Squirrel Cage Motors • Gear Motors • Wound-Rotor Motors • Synchronous Motors • DC Motors

Fax to:

• DC Motors - Crane and Mill • Adjustable Speed Drives • Generators - AC and DC • Engine-Generator Sets • Transformers, Single Phase

P.O. Box 2812 • Toledo, Ohio 43606

• Transformers, Three-Phase • Across/Line Magnetic Starters • Reduced Voltage Starters • Safety Switches • Phase Convertors

800-248-4479

www.rowelectrical.com 419-248-4479 rowelec@glasscity.net WE ANSWER THE PHONE 24 HOURS • WE BUY USED Electrical

419-244-8887

2001 Rotochopper MC166

Machine won’t last at this price!

Item ID: 12378 Contact: Daren/Michelle 800.315.9950 Ext. 603

www.LBXonline.com CAT DIESEL ENGINE, READY TO WORK, CAB W/ A/C - Item ID-11792 - Michelle 800-3159950 x603 MORBARK 58 Chipper - This machine is ready to work Item ID-12082 - Daren 800-3159950 x603 Peterbilt Truck - 2000, Peterbilt Truck, Sleeper, Good running condition. - Item ID12176 - Chris 800-315-9950 x600 Prentice 210D - 1995, Model 210D Mounted On A Prentice Articulated Self Propelled Carrier, S/N 210P52736, Prentice C742 Grapple, Lever Controls, 6059 Deere Engine. Working daily,good dependable machine. - Item ID-12174 - Chris 800-315-9950 34 n

November 2011

1993 Morbark Model 20 Tracked Chipper Has loader! Runs great!

2007 CAT 325D w/624 Waratah Proc.

Head

www.LBXonline.com

Item ID: 12283 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

x600 Prentice 490 - 2006, Model 490, Dual Arch Grapple Skidder, 8000 Hours, 30.5x32 Tires Approx. 50%, Less than 500 hours on dealer rebuilt engine. One owner machine.

- Item ID-12172 - Chris 800-3159950 x600 Rayco Stump Grinder Model RG1665AC - New teeth - Item ID-12374 - Daren 800-315-9950 x603 Rotochopper MC-166 XLT - This horizontal grinder is powered by a 460 hp CAT 3406 Diesel engine. CAT engine was replaced while under warranty in 2003.

Built-in colorizer adds to the productivity as raw materials are colored at the same time

they are ground. In-feed hopper is 16’ long by 66” wide. Rotor is 66” wide by 26” diameter. Unit has a variety of screens & screen sizes. The frame has approximately 3050 hours and the engine has approximately 2000 hours.

Although this unit has only been used to grind pallets, it is also excellent for dry wall, bark, brush, green waste, trees, plastics, and garbage.

- Item ID-12362 - Michelle 800315-9950 x603 Timbco Fellerbuncher - 2000, Model 425D, 8.3 Cummins Engine, approx. 7400 hours,U.C. Like New, Timbco Bar Saw W/40 Degree Rotate with less than 500 hours on it, Leveling System And

Item ID: 12339 Contact: Tom 800.315.9950 Ext. 604

Swing System Tight. Very Good Machine, Can Be Seen Working! - Item ID-12155 Chris 800-315-9950 x600 Trim All “All in One” Trim Saw Attachment - Order through Lumberman’s Exchange at great prices. This attachment can replace the bucket on a skid steer, loader/backhoe, or farm loader and turn it into a trimming saw at a fraction of the cost of large trimming machines. Reach from 23’ to 75’ depending on model.

3 models to choose from.

Optional rotating saw and swing out arm for maximum flexibility and greatest performance. Clear power lines, dead limbs, or widen right of ways with 24” saw blade with carbide tips. - Item ID-12105 - Tom 800-315-9950 x604 WANTED: Older Clark Cable or Grapple Skidders still running - If you have an older Clark Cable or Grapple Skidder that you would like to sell, please call to discuss.

Prefer Cable Units of any size.

- Item ID-12151 - Tom 800-3159950 x604 WHO P10-43SHD Tub Grinder This 10-foot WHO tub grinder is powered by a 300 hp CAT 3306B Diesel engine. This tub grinder has been partially refurbished with new mill with swinging hammers, new hydraulic motors and pumps,

Visit us online at www.LBXonline.com!

JOCKEY GRINDER OWNERS!!!

The Secret:

The parts that touch the tooth don’t move!

Are wear plates costing you too much money?

“EZ-SLIDE” TOOTH STOP Introducing & TOOTH REST

In Stock for:

F and 2-1/2 style saws B and 3 style coming soon

This Patented, Spring Loaded Design • Allows for EZ sliding of the grinding wheel to the tooth.

• Eliminates the sticky divots of the old style wear plates.

• Saves you time and money with better control of the sharpener and more consistent sharpening of your saw teeth.

The high quality stainless steel wear plate contacts the tooth as the aluminum frame and grinder move to sharpen the tooth.

Our sawyers say they will not go back to the old style parts.

Joe Nowak Lumberjack Hardwoods Menominee, Michigan

This is one of the best innovations in our industry to come along in years. Where was this 30 years ago?

Kevin Mueller Mueller Brothers Timber Old Monroe, Missouri

The EZ-SLIDE has saved many happy customers time and money.

Call 1-800-582-0470 TODAY and bearings, hoses and belts replaced as needed. Owner has also given it a fresh paint job and had the engine checked over. Two inch screens are installed. There are less than 4000 hours on this tub grinder. This grinder will grind all types of wood waste including pallets, limbs and brush, yard trimmings, paper, and much more. This tub grinder is in great shape and ready for work. - Item ID12360 - Michelle 800-315-9950 x603

MISCELLANEOUS

2007 Monarch Dynasty Motor Home - Unbelievable package!

Less than 30,000 miles!

Luxury at its’ best. Came to seller from Bank Repo. Allison Automatic Transmission; Cummins Diesel. Surround sound entertainment with 3 TV’s! This is a top of the line motor home for a price you won’t believe. Call us for more amazing details of the features. If you want to cruise the highways....here is the way to go! NC - Item ID-12140 Tom 800-315-9950 x604 NEW 2010 Saukville Tractor - Cummins 37HP, hydrostatic drive, front & rear PTO & 3 Pt hitch. Cat 1 3-pt hitch, and drawbar, and can mount row crop (vegetable or nursery stock, including tree

www.menomineesaw.com Info@menomineesaw.com

seedlings) cultivators under the front (between the rear wheels and front wheels), right in front of the operator who can then see the work easily and avoid crop losses from the cultivator going into the crop. Can also be fitted with a blade in the center, like a road grader, for light grading. It is completely hydrostatic drive. Has ability to drive attachments needing hydraulics (spraying equipment in fruit or nut orchards?). Can be fitted with a hydraulic drive PTO shaft (thus, infinite rpm adjustment). Specifications available on request. - Item ID-

For Classifieds Call Your LBX REP at 1-800-315-9950

12300 - Tom 800-315-9950 x604

MOULDERS

Fukami 6 head moulder NTX150 - Item ID-11753 - Michelle 800-315-9950 x603

PALLET MACHINERY

2005 Bronco Model 2006 Pallet Nailing System - Pallet nailing system with roll-out.

Was used to build 48”x40”.

New in 2005. One owner. Item ID-12108 - Daren 800-3159950 x603 Bob Hanna Double Head Pallet Notcher - Item ID-11815 - Michelle 800-315-9950 x603 Hawk Bandsaw Dismantler - Powered by a 3-phase, 15-hp electric motor. Has a 64” table. Can be a one or

The Original Lumberman’s Exchange n 35

Why? • We use only the highest quality nickel alloy steel • NEW state of the art CNC milling centers for perfect pocket geometry • 100 + years of combined hammering and manufacturing experience • Proudly made in the USA • Stock to 10 days on standard sizes • Nations largest distributor/manufacturer of saws and knives

CALL 800-862-4544 Locations in • Hampden, ME • Meridian, MS • Florence, SC • West Monroe, LA www.usblades.net 36 n

November 2011

two-man machine. Large tires for extended blade life.

Capacity is 50-80 pallets per hour. Manufactured by Saw Service & Supply Co. - Item ID-11065 - Michelle 800-3159950 x603 Mark I Pallet Dismantler - one-man, 62” table Mark I Item ID-11811 - Michelle 800-315-9950 x603 Pallet Chief lll nailer - auto naller - Item ID-11812 Michelle 800-315-9950 x603 Smart Bandsaw Dismantler - 64” table. Two-man operation. Less than 100 hours on a complete rebuild.

Powered by a 15-hp 3-phase motor. Push button table height adjustment. 400-700 pallets per 8 hour shift.

Manufactured by Smart Products. - Item ID-11066 Michelle 800-315-9950 x603 Williams 200 H.P. Hammermill Grinder - This 200 H.P. hammermill was recently removed from a sawmill where it was being used to grind wood waste to boiler fuel for several large industrial customers. This grinder has a very large capacity and would work well in the grinding of whole pallets because it has a top opening size of 27” X 52”. This grinder is powered by a 200 H.P. electric motor that operates at 1200 RPM and uses 460 voltage for its power. The electric motor is direct coupled to the grinder through a shear coupler to prevent damage from being done to the grinder. This machine is equipped with a bar type screen that determines the size material the machine is going to produce. Of course this screen can be changed to achieve many different size materials being produced from the same machine.

This machine comes with a size # 6 motor starter and 600 amp breaker which are enclosed in a large free standing electrical cabinet. This is a very nice clean unit and would work ideally for many grinding applications. Item ID-12011 - Daren 800-315-9950 x603

PLANERS

Newman 4 sided planer - This 6-3/4” x 16” capacity 4 sided planer has been updated with separate motors for the feed, top head, bottom head, and both of the side heads. It has sat idle for some time but is restorable. I overhauled the side heads and they have been stored inside. This machine differs from most 500 models in that it has 9” feed rolls rather than 8”. - Item ID-11729 Michelle 800-315-9950 x603 Newman S682 two sided planer. 6”x30” capacity. 6 knife heads - 30” Width, 6” max. & 1/4” min. thickness cap., shortest stock 46” (not butted) 20” butted; manual thickness adjustment. Equipped with: 40 HP - 3,600 RPM Direct drive motor to top head, 20 HP - 3,600 RPM direct drive motor to bottom head, both heads with NEWMAN 6-knife straight cutterheads, 7” max. cutting circle. - Sectional top chipbreaker with 3” wide hardened steel sections, 1-1/2” max. travel. 10 HP Mechanical feed drive, variable feed speed from 50 150 FPM, feed system with (6) 8” dia. feed rolls, (2) top infeed rolls sectional with 2” wide segments allowing 5/16” independent yield and 1-1/2” yield of the entire roll, max. cut top 1-1/2” and 1/4” bottom. - Item ID-11747 - Michelle 800-315-9950 x603

RECYCLING EQUIPMENT

2002 Brush Bandit 250 - 12” capacity disc-style chipper with auto-feed Cat 115 horsepower engine, in 2006 engine got new assembly and doghouse, 137+/- hours Visit us online at www.LBXonline.com!

Financing Available

Shrink Wrap Firewood/Wastewood

1998 Valmet 911.1 Harvester One owner! Ready to work!

Item ID: 12338 Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com

Sell Your WOOD – $300/cord or More!

Double or triple your profits by shrink wrapping wastewood - forewood with WOOD-PAKer! Attractive various size packages can be obtained with our high production, easily operated and affordable machines. Eight machines available. The ideal equipment for producing square bundles-palletizable for ease in storage and transporting.

Inquire for free details. Video and Package samples at nominal fee.

B & B Manufacturing • 3007 West River Road • Olean, NY 14760

1995 Prentice 210D Log Loader w/Delimber

Item ID: 12384 Contact: Daren/Michelle 800.315.9950 Ext. 603 www.LBXonline.com

on new engine, 1260+/- hours on frame, upper feed wheel hydraulic lift, work ready!

- Item ID-11835 - Michelle 800315-9950 x603 2003 Morbark 7600 - 3200 hours on a Cummins 12-cylinder engine, 1000 horsepower, ran daily, magnetic end pulley, wireless remote, 5X5, 8X8 screens, Twin Disc clutch, tight clutch, new mill rods, balanced mill, new lights, 85%-95% tires, very good value for a horizontal grinder this size!

- Item ID-11830 - Michelle 800315-9950 x603 1993 Morbark Model 20 Tracked Chipper - Just over 8000 hours. Very solid and compact machine in good condition and ready to work.

Compact for the size. Has loader so unit is totally self contained. Tracks at 60%.

Toll Free 1-800-654-5320 E-mail: bbmfg@sprynet.com • Web: http://home.sprynet.com/~bbmfg/ Great value for a tracked chipper. - Item ID-12339 - Tom 800-315-9950 x604 1993 WHO P12-63XSHD - 700 HP CAT 3412 Engine, owner used it to grind mulch, comes with misc. parts, Approx.

13000 hours and is working daily. Engine was rebuilt by Cat 4500 hours ago. Owner is selling due to buying a larger machine. This machine won’t last!!! - Item ID-12139 - Daren 800-315-9950 x603 1994 Haybuster HD-10 Tub Grinder - Powered by a John Deere Diesel Engine, Hydraulic Driven Tub and Conveyors, 10’ tub size, Hour Meter Reads: 920 Hrs, S/N: 18-1-49-0312 - Item ID-11693 Michelle 800-315-9950 x603 1997 Morbark Model 1300 Tub Grinder - Simply an older unit in EXCELLENT CONDITION! Only 5543 Hours. One owner.

A fraction of the price of new, yet this is ready to take on the tough material reduction jobs. Stumps, pallets, wood waste....this machine will

reduce into usable material.

Self contained with loader and operator’s cab with AC and Heat. All functions run well.

Just a great value. - Tom 800315-9950 x604 1999 CBI Model 4800 Grinder 1680 Hours: Twin Disc Clutch; Flex reversible fan, Remote control, Weight 93,000 lbs., Tires 445/65R22.5, New teeth, Updated hammers, Full engine service just completed; Cat 3412 engine w/12 cylinders; Ready to go to work; Very good condition - Tom 800-3159950 x604 2001 RotoChopper MC166 - Cat 3406 engine, 460 hp, approx. 8700 hours, coloring unit, magnetic roller, this machine has been used for gringing pallets. - Item ID12378 - Daren 800-315-9950 x603 2002 Vermeer Horizonal Grinder Model HG365 Cummins Engine, 365 HP, 20” capacity, New belt, New teeth, New floor plates - Item ID-12372 - Daren 800-315-9950

For Classifieds Call Your LBX REP at 1-800-315-9950

x603 2003 ROTOCHOPPER CP118 - 2003 Rotochopper CP118 Portable wood chip processor with coloring unit. This machine runs good but has an electric problem it keeps flipping the circuit breaker for the conveyor and auger Sold at this price As Is needing work to electric has extra screens, 2” screen. Will produce 35 - 40 yards per hour Price : 40,000 USD - Item ID-11973 - Daren 800-315-9950 x603 2006 Morbark Hurricane 18 Chipper - Super clean chipper.

1050 hours. Strong engine.

Great condition. Ready to go to work! - Item ID-12240 - Tom 800-315-9950 x604 2008 Morbark 3800 Wood Hog - Super Clean machine!

Only 3064 hours. Very well maintained. S/N 189-1033. JD 600 HP Tier 3 Engine. Remote control. Mag End Pulley.

Hydraulic Fan. Break away mounts. PT Tec Wet Clutch. 3” Hex Screens. - Item ID-12277 -

The Original Lumberman’s Exchange n 37

2005 Valmet 941 Harvester w/370.2 Head Includes Low Boy! Item ID: 12265 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

Tom 800-315-9950 x604 Gyro Trac GT25 - Machine has 1278 hours. - Item ID-11801 Michelle 800-315-9950 x603 Haybuster IG-10 Tub Grinder - This 8-ft. tub is powered by a 275 hp CAT engine. This portable tub grinder has 48 swinging hammers and a set of 1” screens. Unit also has new clutch and belts, and the hammers are in good shape.

It was being used to grind

Franklin Skidder 142

Item ID: 12376 Contact: Daren/Michelle 800.315.9950 Ext. 603

www.LBXonline.com green waste but can also be used for processing many types of wood waste. With a pintle hitch for mobility, this machine is ready to be pulled to your site today and put to work. - Item ID-12361 Michelle 800-315-9950 x603 MODEL 1300 SELF CONTAINED TUB GRINDER CAT DIESEL ENGINE, READY TO WORK, CAB W/ A/C - Item ID-11792 - Michelle 800-3159950 x603 MORBARK 58 Chipper -

Franklin Skidder 170PT Item ID: 12377 Contact: Daren/Michelle 800.315.9950 Ext. 603 www.LBXonline.com

MORBARK 58 3 knife Chipper, This machine is ready to work - Item ID-12082 - Daren 800315-9950 x603 Rayco Stump Grinder Model RG1665AC - New teeth - Item ID-12374 - Daren 800-315-9950 x603 Rotochopper MC-166 XLT - This horizontal grinder is powered by a 460 hp CAT 3406 Diesel engine. CAT engine was replaced while under warranty in 2003.

Built-in colorizer adds to the productivity as raw materials are colored at the same time

they are ground. In-feed hopper is 16’ long by 66” wide. Rotor is 66” wide by 26” diameter. Unit has a variety of screens & screen sizes. The frame has approximately 3050 hours and the engine has approximately 2000 hours.

Although this unit has only been used to grind pallets, it is also excellent for dry wall, bark, brush, green waste, trees, plastics, and garbage.

- Item ID-12362 - Michelle 800315-9950 x603 WHO P10-43SHD Tub Grinder This 10-foot WHO tub grinder is powered by a 300 hp CAT 3306B Diesel engine. This tub grinder has been partially refurbished with new mill with swinging hammers, new hydraulic motors and pumps, and bearings, hoses and belts replaced as needed. Owner has also given it a fresh paint job and had the engine checked over. Two inch screens are installed. There are less than 4000 hours on this tub grinder. This grinder

Firewood Season

Lumberman's Exchange has the equipment you need to get started now!

Whether you need a firewood processor, truck, bundler, conveyor, etc. I can help you locate that equipment.

To all subscribers with equipment to sell, please call me. The first month your equipment will be listed in a 3" color ad as well as being placed on the Lumberman's Exchange website.

I look forward to working with all buyers and sellers.

38 n

November 2011

is Here!

Call Michelle 800-315-9950 x603 To discuss available equipment or equipment needed.

Call now, before it gets too far into the season.

Visit us online at www.LBXonline.com!

Good Shape!

1996 Timberjack Forwarder Item ID: 12364 Contact: Daren/Michelle 800.315.9950 Ext. 603 www.LBXonline.com will grind all types of wood waste including pallets, limbs and brush, yard trimmings, paper, and much more. This tub grinder is in great shape and ready for work. - Item ID12360 - Michelle 800-315-9950 x603

ROLLING STOCK

1983 Mack Cruiseliner w/tail mount 1986 Hood 7000 Series loader - Mack E6-350, 800k+ miles, 9 speed Fuller trans, 20k lb.front axle w/ floats, 44k lb. rears. New in last 2 years – windshield, paint, front rims, tires, batteries, reman transmission, conversion to S-cam brake assemblies on front axle, rear brake shoes, air compressor, air dryer, rear suspension w/ trunion, buckets, bushings, truss rods and frame rail, front grille, cab jack pump, recent clutch adjustment, fluids changed and more. Rubber at 75 percent, some minor leaks. Parts truck available.

Hood 7000 loader w/ 22-foot boom, butt grapple and 11k# lift capacity @ 10 feet. New in last 2 years – main boom cylinder, left grapple cylinder, rod ends in right grapple and jib boom cylinders, all other cylinders repacked and/or rebuilt as needed, external filter assembly, valve sections and spools, most swivels and hard/soft lines. Some minor leaks. will take offers! - Item ID-11796 - Michelle 800-3159950 x603

West Salem Grinder & Gen Set

Item ID: 12386 Contact: Daren/Michelle 800.315.9950 Ext. 603

www.LBXonline.com SAWMILL 1992 Sanborn sawmill MiniMax - 36” x 20’ log capacity, 40 HP diesel engine, hydraulic power unit, uses 6” wide saw blades, includes (10) saws. This machine has a log cleaner ahead of the saw mounted on sawmill. - Item ID-12196 - Daren 800-315-9950 x603 1995 Simonds Vertical Circle Saw Leveler - Excellent Condition. Low Hours-3984 Hours. Runs and looks like new. Ball Type KRO-9702.

Serial # 05-9702-1131 Reduce run out with this machine allowing your saws to cut more accurately. Remove all lumps and bumps. Laser readings of the saws flatness are displayed on digital screen. Able to process saws up to 32” diameter and plate thickness up to .150” thick.

Price includes set up and training so you know you will be getting a great machine!

- Item ID-12084 - Tom 800-3159950 x604 2001 Timber Harvester Grade Resaw System - Capacity 12”x12”x16’, 28” dia all-steel band wheels, 30 HP electric motor, 1-1/2” blade package, Powered rollers, Pop-up cross-over chains, Board seperator, Off-line kicker-type turner, Push button setworks, Seperate hydraulic power pack for feed works - Item ID-12190 - Daren 800-315-9950 x603

2003 Franklin Q70 Grapple Skidder Item ID: 12337 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

2008 Challenger Grinder Model CHSP 200-4090 - Like New Condition. Only 315 hours. 120HP - 3 phase electric motor. 2 sets of screens, 3/4 and 1”. Photos say it all. Machine runs great.

Owner lost contract. This machine makes great animal bedding. - Item ID-12284 - Tom 800-315-9950 x604 Log Decks - The bright colored long deck is a 30’ 2 strand with stop and loader and hydraulic drive.

Strand spacing is 48”. Deck is based on 5x10 tube frame.

Underneath is a 14’ 2 strand deck with 80” strand spacing.

There is a gear box but no motor. Could be hydraulic or electric. can be solld separt MAKE OFFER! - Item ID-11731 Michelle 800-315-9950 x603

SHAVING EQUIPMENT

2009 Salsco 30 Shaving Mill 1255 Hours, 4 Sets Of Knives, 8 ft. Blower Pipe Extention, C4,4TA Cat Engine, Original Owner, Excellent Condition, Can See Running! - Item ID12182 - Chris 800-315-9950 x600

VEHICLES-TRUCK/TRAILER/VAN

1996 Clement End Dump Trailer, 24FT X 96IN - Tandem Axle, Spring Suspension, Air Brakes, Steel Wheels, GVW 77120, - Item ID-11997 Michelle 800-315-9950 x603 2000 Mack CL713 Tri-Axle 460 engine, 235,000 miles, 18 speed transmission, Prentice

For Classifieds Call Your LBX REP at 1-800-315-9950

1995 Franklin Tree Farmer Model C6 Forwarder Item ID: 12328 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com 120E loader, New steer tires, drives are at 80% - Item ID12357 - Daren 800-315-9950 x603 2000 Peterbuilt Logging Truck - 2000 Peterbuilt, N-14Cummins engine, 18spd., 120 Prentice loader, pup trailer. - Item ID-12159 Michelle 800-315-9950 x603 Bayliner Ciera - Call Daren at 800-315-9950 Ext. 603 to discuss. Comes with triaxle trailer - Item ID-12363 Michelle 800-315-9950 x603

WOODWORKING

Large Array of Lumber Mill Processing Equipment Owner of large facility in NM is selling off surplus machines no longer in use.

Go to wwwlbxonline.com and search for this item to see many different machines and tools such as a Tri State gang rip saw; Deihl 5 head Moulder; Complete set of cutter heads; Zincker 20 inch 25hp gang rip saw (short length lumber); Trim Tables; GLover Dowel Moulder; Excel belt driven moulder; Six head Vonnegut 8 inch moulder; and more! - Item ID-12169 - Tom 800-315-9950 x604 McDonough 54”band saw - This is a square column, weight strain machine. The serial # is 54 1076. - Item ID11741 - Michelle 800-315-9950 x603

The Original Lumberman’s Exchange n 39

The Lumberman’s Exchange Post Office Box 1916 Columbia, Tennessee 38402

PRSRT STD. U.S. Postage PAID Permit No. 212 Pulaski, TN

Superior finished product control for biomass fuel, colored mulch, animal bedding, and other wood fiber commodities.

  

Electric or Diesel 150 - 875 Horsepower Portable, Stationary, or Track

Trust your wood fiber resources to the “Perfect In One Pass” TM advantage.

6 B-6 k c ly Tra Dol t w r Ne spo ran T with

Rotochopper, Inc. | 217 West Street | St. Martin, MN 56376