August 2018

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot 377  Issue 364

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

Industry's**Most Trusted Source CALENDAR** NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started N E Wit All!

Hot Springs, Arkansas www.arkloggers.com

MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Infeed

is an extremely accurate machine

Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

is supported on both sides. This

SLog & W Cutoff 125 BandSaw Mill with

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

Donna Heninger

pressure guides. Top Casting wheel

Item ID 13876. Austin x703

KentuckyWoodExpo.aspx

DESIGN DIRECTOR

it includes two sets of Mcdonough

feet a minute also has CLT presses.

http://www.kfia.org/ Armstrong Sharpening Equipment

(888) 401-6367 ext. 701 j@lumbermens.co

that go up and down, with airbags,

in ve1y good condition, Cuts 130

Lexington, Kentucky

JohnSorter Williams– 39 bay, 16’ Sling

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal

Cornell 6 x 42 Edger, 3-Saw

Carriage Log line itTrough includes carriage Mellott

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

NEW CRD Metalworks .................... 25

Multitek ................................... 12

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

machine, with air strain conveyers

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MAILING 4-Arm TiltADDRESS Hoist with

10 hours on this machine since it

NEW

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

Danckaert Band Resaw - Roughly has been rebuilt, it has a 24foot in

Escanaba, Michigan

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

BANDMILLS & HEADSAWS

feed deck 20 foot out feed deck 72ND ANNUAL GREAT LAKES with 44 inch wheels, and all the LOGGING & HEAVY EQUIPMENT EXPO MorbarkThurs, 58” 67Knife MDI Metal Detector Sept - Sat, 9 Sept bells and whistles, its a production

Since 1986, Lumbermens has Precision 58” HD Chipper published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

Corley Mfg .............................. 32

Precision 6 x 6

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

NEW

Piper's Saw Shop.................... 13

STACKING RAC

Rotochopper ............................ 40Custom Specialty Conveyors 30” Cambio Ring Debarker

The Lumberman's Exchange is CW Mill-ArmorHog .............. 17 published monthly by Woods CW Mill-Hogzilla ................... 15 Publishing, P.O. Box 1916, Columbia, TN 38402. All rights Dyna Products ........................ 35 reserved. All editorial/ advertorial submissions are used at the Empire Hydraulics ................... 8 discretion of the publisher and may be edited for purposes of clarity Great Lakes Mfg. .................... 34 and space. Although all efforts have Hahn Machinery been made to ensure accuracy of Industry's Most Trusted......................

Source 3 content submitted by advertisers Hurst Boiler ............................. 14 and writers, the Lumberman's Exchange, its principles and Iron Bull ................................... 21 associates, are not held liable for errors or omissions. Reproduction, Kilgore Saw ............................. 22 in whole or part, is prohibited with­ Lignomat ................................. 24 out written consent. ©2017 Woods Publishing

Row Electric ............................ 20

800-241-8983 Sawmill Exchange .................. 11

Ken Dickert, President

Select Sawmill ......................... 19

Eric Doss 706-478-1581 Jim Lichucki 706-478-5498 Thomas Industrial Controls..... 10 Wes Dickert 706-478-5893 Union Grove Saw & Knife.. 2, 37 Smith Sawmill ........................... 4

The Paul Bunyan Show ......... 39

sales@benjones.com

Universal Refiner ................... 23

** Financing Available **

www.BakerProducts.net WoodMizer ................................ l Don't See What You're Looking for Here? Search Our Complete Inventory at www.benjones.com 800.S48.6914 I S73.663.7711

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 3

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot 377  Issue 364

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 5

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO)

‘93 Barko 180B Item ID: 14077

Austin FREE EQUIPMENT LISTINGS, CALL (888) Contact: 401-MENS Ph: (888) 401-6367 x703 Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

FOR SALE

1988

800.548.6914 573.663.7711

bakerproducts.net like us on 2018

STACKING RACK C-channel grooves for banding strap positioning Four steel heavy-duty casters Center-point shaft with thrust bearing to provide easy rotation

120 Acres contains at Least 50 % Redwood, 10 To 15 % Doug Fir, the remaining is Tan Oak and Madrone, with a very Good Running Spring. In Mendocino County, in Northern California $ 650,000 Call PETE at 707-815-3640 BANDMILLS & HEADSAWS

DANCKAERT BAND RESAW Roughly 10 hours on this machine since it has been rebuilt, it has a 24 foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells 13428 Victory Ln. // PO Box 124 Adams Center, NY 13606 and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot 377  Issue 364

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurateTrack machine ‘13 KMC 2500 in very good condition, Cuts Skidder 130 feet a minute also has CLT Item ID: 14078 presses.

Contact: Austin Austin x703 Item ID 13876.

Ph: CARRIAGES (888) 401-6367 x703 & DRIVES 2010 CARDINAL HD CARRIAGE CARRIAGES off onto a Carriage conveyor.line Thisitisincludes a very Cardinal well built processor.

Item ID carriage with onboard13820. log turners, Sam x702 carriage drive, hyd pac for Processor carriage, -sawyers Firewood This is cab, computer controls, cabinet with a Chomper Model 16 PDA electronic drives for carriage automatice firewood processor 48” knees, husk including with John Deere power bottom saw and 36”unit topwith saw, short pop-up transfer edger, low hours.

Control panel to includes belted rollcase water to clear tach, oil pressure, temp slabs and and cuts from sawline, log stop amp gauges. Cuts logs up to 16”. and loader to drop logs onto One ownerheavy and comes carriage, dutywith log all turner manuals and receipts.

Purchased under log stop and loader to deal for with big logs carriage new $32,500.

Itemonto ID 13865. and track and frame.

Sam x702 Item ID 13198. Sam x702

Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens  since 1986

❘

TRIPLE DRUM DRYER Item ID:PASS 13920 12 x 42 Mec triple Contact: Austin pass Drum Dryer, comes with trunnions.

Ph: (888) 401-6367 x703 Item ID 13924. Austin x703 DYNAMIC CHIPPERS

2004 JCB 441 WHEEL LOADER 3,509 hours on this machine, BARKOas it should. everything works 1994 Barko 160B - Electric available I have many videos of it running,30'and can75hp be sent knuckleboom, boom, upon request. motor, Rotobec continuous Item ID 13888. Austin x703 capacity!. Item ID 13421. Sam x702

grapple, 5,000 original hours.

(excellent condition.).

Item ID 2008 DYNAMIC 585 CHIPPER

13238. x700 dynamic cone This isChris a 2008 headBarko chipper 1700 hours, 1995 775 Bwith Feller Buncher

very recently good condition.

-inPumps redone. 400 Easily hrs produces high quality chips with patented ‘Cone’ drum design. good. in goodload working Can easily 42’order. vans22in and kohing head. head works produce 6 - 8 loads pergreat. day.

Item 13882.

Item ID ID 13185.

Sam Austin x702 x703 on injection pump. always started

FIREWOOD 1999 Barko 160DPROCESSORS - new engine with

2010 SHOP BUILTHour approximately 1500 hours.

94 Barko 275 - Excellent value

COMPLETE 50% or better. 475 SAWMILLS hp Cummins

Value! PA. Item ID 12062. Sam x702

‘95 John Deere C6 MEC 12 X 42 Tree Farmer

Diesel.

Hours. One owner.

20067500 WOODMIZER LT300

but electronic option is available.

adjustable to single two way. Great

MEC 12 X 38 TRIPLE PASS DRUM DRYER Comes with trunnions, drum drive, fan and cyclone.

Item ID 13925. Austin x703

PRECISION 58 CHIP PAC Single chute loading system.

Chipper Cat Under Sam Carriage at Item -ID 12764. x702

LOGGING EQUIPMENT CHIPPERS BANDIT

1999 Bandit 1900 Tracked Disc

Has Log Lift. Uses 4-way wedge

DRY KILNS

WOOD PROCESSOR It has a 353 Detroit diesel, 40 inch have only used it to load trucks or insert tooth circle saw, 30 foot as a backup as needed. a CTRon chain conveyer, 8 wayHas splitter, delimber, grapple hastrailer. been rebuilt.

20,000lb goose neck Itemcylinders ID 13916.

Austin Boom have minor x703 leaks.

Handles logs up to 32”. Uses

13HP Honda motor. Manual start

operating is available, and can be sent upon request.

Item ID 13892. Austin x703

This maintained. mill is currently running, Well Item ID 13294.

and includes the sawmill, and cab. An incline conveyers, a 2004 Bandit Beast Model 4680 transfer table and two sets of 3412 Dieselmill engine rollerCaterpillar tables. This saws a with 850 board HP. 5300feet hrs. or Millmore in million of walnut every year.

Max log good condition. Just finished 10 diameter 36in, Max Width of Acre clearing job, ready to work! cut 25in, The width of the band Remote control. Big production is 1 1/2 Inches. Video of it Sam x702

 List  seLL  exchange  buy  save

meter dont work. The last 2 owners

Item ID 13694. Sam x702

FIREWOOD PROCESSOR This is a homemade processor with hours 3,500. 5.9 withlow a at 10’ logat deck.

Has a CUMMINS grapple.and hydraulic continuous grapple, chain kickerGreat!. that Item all runs off Sam of a 4 Runs ID 13740. cylinder Mercedes power unit. x702 Has a 4’ chain saw that kicks off BELL This is a very onto a conveyor.

1990 T - This Bell has well Bell builtSuper processor. a brand Duetz engine.

Lever Itemnew ID 13820.

Sam x702 control, 33” bar, pump and tranny ❘

 LumbermensCO.com

FIREWOOD PROCESSOR This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges.

Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. The Tree Item ID 13865.

Sam x702 that Started LOGGING EQUIPMENT

it All!

BANDIT

Since 1986,BANDIT Lumbermens has 2004 BEAST published a monthly circular MODEL 4680 reaching sawmills, loggers, 3412 Caterpillar Diesel engine with pallet makers, recyclers and 850 HP. 5300 hrs. Mill plants in good industrial woodworking condition.

Just finished 10 Acre worldwide.

clearing job, ready to work! Remote PUBLISHER control. Big production capacity!

Woods Publishing Item ID 13421. Sam x702 ADVERTISING BARKO SALES Morris Woods

1994401-6367 BARKO ext.

160B (888) 704 Electric knuckleboom, morris@lumbermens.co 30’ boom, 75hp motor, Rotobec MARKETING DIRECTOR continuous grapple, 5,000 origiJohn Williams ‘04hours.

Takeuchi TLN140 nal (excellent condition).

(888) 401-6367 ext. 701 ItemID: IDJW-880805 13238. Chris x700 j@lumbermens.co Item BELL Contact: J Williams DESIGN DIRECTOR Ph: (888) 401-6367 x701 Donna 1990 BELLHeninger SUPER T This BellEQUIPMENT has a brandREPS new Duetz engine. Lever Sam control, 33” bar, pump Wall and tranny been rebuilt not long (888)has 401-6367 ext. 702 sam@lumbermens.co ago. Hour meter is inop. New paint.

Runs perfect.

HasWoods heat and air, it Austin just needs be fixed. ext. 703 (888)to 401-6367 austin@lumbermens.co Item ID 13896. Sam x702

MAILING ADDRESS 1993P.O. BELL BoxSUPER 1916 T Good runningTNcondition.

Columbia, 38402-191633” Bar Saw. (888) Tires401-6367 at 50%. Deutz engine. AD Hour meter broken.

SUBMISSIONS Item ID 13543.

Sam May be sent to­x702 morris@lumbermens.co

BELL TREE CUTTER POSTMASTER Around 1000 changes ‘01Send JD address 640Ghours III onto:the machine.

New air cooled motor Lumberman's Exchange Itemabout ID: P.O. 14019 Boxhours.

1916 Rebuilt only 300 Contact: AustinTN Columbia, 38402 bars dangling head.

Several Ph: (888) 401-6367 x703 and chains.

Machine came off The Lumberman's Exchange is the job in February and published monthly by Woodsis field Publishing, P.O. Box 1916, ready. with only hours.

Itsrights been used Columbia, TN 38402.

All Item ID9500 13943.

Austin x703 reserved. All editorial/ advertorial submissions are used at the chipper.

Item ID 13804. discretion of the publisher andx702 may 2006 CASE 440 SKIDSam LOADER be edited purposes of clarity With only for 871 hours, 2012 Caterpillar 559B - this Onlymachine 4000 and space. Although all efforts have starts, runs, and operates likeofnew. hours this like new loader.

It I been on made to ensure accuracy have many videos by available and can content submitted advertisers has only worked in pine until writers, Lumberman's beand sent uponthe request. recently.

Item ID 13695.

Samx703 x702 Exchange, its principles and Item ID 13886.

Austin associates, are not held liable for 2013 Cat 525 C Grapple Skidder errors or omissions. Reproduction, CASEClean 850G LONG TRACK DOZER -99’ Super Cat with only in whole or part, is525 prohibited with­ out written consent.

One owner machine, only 3300 2700 hours and a 5000 hour Power ©2017 Woods Publishing

its whole life dragging CASE wood for a

** CALENDAR**

original hours, has never been 1994 CATERPILLAR D4 HI used in the woods, it has a ripper on TRACK WITH GRAPPLE the back, original pads, and chains, This is an extremely low Under carriage is new along with hour dozer/skidder with only NY new STATE2800 WOODSMEN'S FIELD DAYS new rollers on the bottom, and actual hours.

Comes Fri, 18 with August 20 August sprockets. new- Sun, 30” pads and chain.

Boonville, NewisYork Item ID 13909. Austin x703 Undercarriage still in excellent CATERPILLAR www.starwebhosting.net/woodsmen/ shape. Fixed grapple and no winch.

1994 CATERPILLAR SOUTHWEST 320 FOREST PRODUCTS EXPO Item ID 13932. Sam x702 Dry machine that is in good Fri, 25 August - Sat, 26 August condition for the year. The stick and Hot Springs, Arkansas 1996 CAT 214 MOBILE bucket cylinder have been repacked. www.arkloggers.com EXCAVATOR It has a thumb and bucket on it, with 36’ tons steel also has a 230 Waratah processing 72ND ANNUALmagnet GREAT 3LAKES shear. low hrs!

All hard tires, head that can be sold LOGGING with it. & HEAVY EQUIPMENT EXPO 4 outriggers ideal for scrap Hours are around 19k, motor has Thurs, 7 Sept - Sat, 9 Sept business. ItMichigan also has 48’ swavel been replaced a couple years back. Escanaba, bucket for street ditch clean up.

Machine is working daily.

Item ID 13441. x702 Item ID 13936. Austin x703 MID-ATLANTIC LOGGING &Sam BIOMASS

Fri, 15 Sept - Sat, 16 Sept

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

PIPER’S Saw Shop

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

2005 CATERPILLAR 525B BANDMILLS & HEADSAWS This is a dual arch skidder with Danckaert Band Resaw - Roughly winch. Very low hour skidder 10 hours on this machine since it with 7900 frame hours and has been rebuilt,on it has a 24foot in only 63 hours a new engine.

Continuous grapple, feed deck 20 foot out feedtires deck are 30.5’s This really with 44 @ inch70%. wheels, andisalla the nice skidder for the price. bells and whistles, its a production Item ID 13816. Sam x702 machine, with air strain conveyers

that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours

5 7 0 6 • 5 4 8 • 800 THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org

** INFO LINK**

Promotional Pricing Offer

Simonds Red Streak Hard Back 1-1/4” x .042 x 3/4” or 7/8” L im it e28d Length 13’2” B & B Mfg. ...............................

18 M&F Gauge .............................

T im O n ly 29 Menominee Saw .....................

Meadows Mill, Inc. ................e33

$14.71 $14.27 each

B. H. Payne .............................. 16

Baker ...................................... 5, 7

Tell us you saw it here!

Metal Detector's Inc. .............. 30

Bell's Machining ..................... 27 Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

Train warranty. 30.5 tires are new -back USED FORESTRY EQUIPMENT FOR arch SALE ❘ winch.  SELL TODAY ❘ -0  SALEwith l§ TODAY SUPPORT in and 60% in front.

Save LowYOUR hoursEQUIPMENT on Cat D5B Dozer Cat24/7 D5BSUPPORT s/n $50,000 off new machine and still

1998 CATERPILLAR 515 FORwith CLASSIFIEDS Grapple winch, no heat or air.

Open cab skidder with 9800 Call 888.401.MENS hours. Tires are 28L’s, rear 90% Seefronts pictures, prices, and are 30% withand new Location all equipment at bear paws of chains.

Item ID 13801. Sam x702 www.LumberMB\ISmagazine.com

this skidder at only 3700. These

22X380, direct drive, EROPS,

on the mill, electronic computer Set

works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including 48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ come  (888) L! 401-MENS hook 401-MENS up to it and go toNO. your7 job site and put it to work to up

2007 CATERPILLAR D6N LGP Phone JEM DOZER ENCLOSED CAB315.284.4126 EXPORT LOG DEBARKING LINE Overall: Cab Heat & AC, 150HP FaxReconditioned 35 Nicholson 315.849.2045 Cat C6.6L, 90% Undercarriage,Website A-5 debarker, cab, infeed hour GPS Ready, Sweeps & www.empirehyd.com Rear glass rolls, log dischage belt with Email Screen, 13’6” PAT Blade, 39,500 “Precision Under Pressure” info@empirehyd.com side log kickers. Call 208-451LBS, Hours: 7,867 Horsepower: 0365 for details. $279,000 150 S/N: ALY03028.

JOHN DEERE Item ID 13567. Chris x700 ‘92 JOHN DEERE 590 D CUTTER 2000 CAT 515 GRAPPLE SKIDDER Will need pads in the future, One Owner Runs great! Is it an sprockets and rails are about excellent condition. Rubber is 85%, it has a 4cyl JD motor. It around 75% Has new Hydraulic has a Rotnee dangle hd. w/ a bar saw and a spare idler. pump and Charge pump.

Item ID 13612. Chris x700 Item ID 13616. Sam x702 CLARK

CLARK RANGER 665D Tight and dry machine, rebuilt motor. hour meter broken, It has a 353 Detroit, with grapple, and winch, always fires right up, and runs with no issues.

Item ID 13748. Austin x703

1995 JOHN DEERE C6 TREE FARMER Only 20 hours on a new 5.9 Cummins engine. The whole center has been fixed, and line bolt redone, transmission is tight, center pins are good. It has a full speed tranny, with two reverse, with a winch. Working daily.

Item ID 13920. Austin x703

EARLY 70’S CLARK 664 CABLE SKIDDER 2004 648GIII JOHN DEERE some center slack, needs front 13428 Victory Ln. // PO Box 124 DUEL ARCH SKIDDER tires, comes with a spare tire. Slick Machine. Runs good motor Adams Center, NY 13606 Gearmatic 19 winch doesn’t hold is in top notch condition. good. 453 Detroit power unit.

Item ID 13610. Sam x702 Item ID 13629. Sam x702

When You Buy Your Circular Saws From B.H. Payne You’ve Bought the best... We Guarantee It!

Gehl CTL 70 Traditional‘05 Quality Combined With

Item ID: JW-986495 Todays Technology Contact: J Williams Ph: (888) 401-6367 x701

‘83 John Call 800 752-0627 Circular SawsDeere Make Sure To Ask For Our Free, Complete Saw Catalog Saw Bits and Shanks 4850 Circular Knives We Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth Quality Brand Reg. U.S. Pat Off

chain conveyer, 8 way splitter, on Carbide Saws Item ID:Tipped 14073 Cutoff Saws & Carbide Saws. We also Carbide Strobe ® Saws Saws, Inserted Tooth20,000lb goose neck trailer. Item ID Contact: B.H. Payne &Austin Company Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels, 13916. Austin x703 Ph: Saw (888) 401-6367 x703 Manufacturers Knife Grinding Wheels, Saw Gumming Wheels & Knives.

Best Value Portable Log Splitter

Here’s What You Get With Every B.H. Payne Saw - Small manufacturer in PA has • Saws manufactured from only the Highest Quality Nickel Alloy Steel. condition. Easily produces high made the best valued log splitter.

• Each Saw Milled with State-Of-The-Art Precision CNC Milling Machine. quality chips with patented ‘Cone’ Handles logs up to 32”. Uses • We Tension Your Saw to Your RPM Speed BEFORE Leaving Our Factory. drum design.

Can easily load 42’ Guaranteed.

13HP Honda motor. Manual start • Your Satisfaction - Completely with 1700 hours, in very good

vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

B.H. Payne & Company, Inc.

EDGERS P.O. Box 90608& GANGS Brewco Saws - Two Brewco Saws East Point, GA 30364 in excellent condition. Runs great.

404 761-8711 Item ID 404 13644.

Sam x702 Fax 761-5398 FIREWOOD PROCESSORS

2010 Shop Built “Since 1890”Wood Processor - It has a 353 Detroit diesel, 40

inch insertinfo@paynesaws.com tooth circle saw, 30 foot E-mail: 377  Issue 364

but electronic option is available.

Has Log Lift. Uses 4-way wedge

2004 JOHN DEERE 648GIII This machine has 13000 total hours on the body, with only 3000 hours on the new motor, comes with a set of chains, working daily.

Item ID 13878. Austin x703 2006 JOHN DEERE 700J ‘16 Halverson DOZER H140 Skidsteer (DEMO) This work horse comes with a winch, and new undercarriage, Item ID: JW-909632 itContact: is tight Jand dry & running Williams daily with 4500 hours.

Ph: (888) 401-6367 x701 Item ID 13883. Austin x703 2006 JOHN DEERE 748GIII 8700 hours, running daily.

Item ID 13881. Austin x703 2006 JOHN DEERE FIREWOOD PROCESSOR This is a Chomper super 14, with a 60hp engine. In very nice shape.

Only 171 hours, comes ‘13 KMC 2500 Track with green chain conveyer. All Skidder of the manuals for the engine, and Itemthe ID: chopper 14078 itself come with it, as well as all of the Contact: Austin electrical schematics.

Ph: (888) 401-6367 x703 Item ID 13894. Austin x703 off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and

‘11 Doosan DL200

amp gauges. Cuts logs up to 16”.

Item ID: JW-113876 One owner and comes with all Contact: J Williams manuals and receipts. Purchased Ph: (888) 401-6367 x701 new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Firewood Processor - This is a

‘05 Transport Trailers Custom Sam x702 2004 Bandit Beast Model 4680 Log Pup

log deck. Has a hydraulic grapple,

with 850 HP. J5300 hrs. Mill in Contact: Williams

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 homemade processor with a 10’

chain and kicker that all runs off of a 4 cylinder Mercedes power

unit.

4’ chain saw that kicks WebHas Site:a www.paynesaws.com

Lumbermens  since 1986

❘

Well maintained. Item ID 13294.

3412 Caterpillar Diesel engine

Item ID: JW-538174

2012 JOHN DEERE 548GIII Single arch with winch, blade extensions, 1 new 28L and 3 @ 50%. This is still a new machine with only 3600 hours.

Item ID 13780. Sam x702 2009 JOHN DEERE 648H ‘93 Barko 180B This is a one owner machine, Item switch ID: 14077 every works, interior is Contact: very clean,Austin radio, heat/ac. Air Ph: (888) x703Tires ride works401-6367 as it should. are 30.5x32. Extremely clean machine with no leaks. Cutting edge on blade is excellent, with no cracks or welds anywhere.

Item ID 13747. Austin x703 FRANKLIN

1995 FRANKLIN 170 Enclosed cab, single arch with a winch, paint, Deere 4 brand newC6 23.126 ‘95 new John firestone tires, around 15000 hours.

Tree Item ID Farmer 13910. Austin x703 Item ID: 13920 Contact: Austin 2003 FRANKLIN Q80 SKIDDER Ph: GRAPPLE (888) 401-6367 x703 7500 hours, but just 5000 hours on reman engine. New Radiator; New Hydraulic Pump; Comfort cab capacity!.

Item ID 13421.

Sam x702 with good working heat and air; BARKO Tires at 80%.

1994 Barko 160B - Electric Item ID 12450.

Sam x702 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

14’ Snow Pusher

on injection pump. always started

good. good working order. 22in IteminID: JW-492406

Contact: Williams kohing head.J head works great.

Ph:ID (888) 401-6367 Item 13185.

Sam x702x701

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

‘04 Fabtek 344B

94 Barko 275 - Excellent value

Item ID: JW-093430

with low at hours at 3,500. 5.9 Contact: J Williams

CUMMINS continuous x701 grapple.

Ph: (888) 401-6367

Runs Great!. Item ID 13740. Sam x702 Processor - This is a Chomper

BELL

Remote control. Big production Waratah 624 Super - New

super 14, with a 60hp engine. In 1990 Bell Super T - This Bell has very nice shape. Only 171 hours, a brand new Duetz engine. Lever comes with green chain conveyer. control, 33” bar, pump and tranny All of the manuals for the engine,

and auxiliary pump. New rebuilt

schematics. Item ID 13894. Austin

good Just finished Ph: condition.

(888) 401-6367 x70110

Acre clearing job, ready to work!

Computer for head (Logrite).  List  seLL  exchange  buy  save 10500 hours. New main pump

and❘ the  chopper itself come with LumbermensCO.com it, as well as all of the electrical

19 44

Item Con Ph:

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 9

ve

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Shrink Wrap FireWOOD/WaSteWOOD

“Precision Under Pressure”

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

Sell Your WOOD – $300/cord or More!

Double or triple your profits by shrink wrapping wastewood - forewood with WOOD-PAKer! Attractive various size packages can be obtained with our high production, easily operated and affordable machines. Eight machines available. The ideal equipment for producing square bundles-palletizable for ease in storage and transporting.

Inquire for free details. Video and Package samples at nominal fee.

‘13 KMC 2500 Track B & B Manufacturing • 3007 West River Road Skidder • Olean, NY 14760 Item ID: 14078

Contact: Austin Toll Free 1-800-654-5320 Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

E-mail: bbmfg@verizon.net • Web: www.bbmfg.org

off onto a conveyor. This is a very

well built processor. Item ID 13820.

BELL’S FIREWOOD PROCESSORS Sam x702

Firewood Processor - This is

• 66 HP CAT Diesel Engine • 44” Circular Saw • 20” Diameter CATCapacity D4H TSK Item ID: 13558 • Single Joystick Contact: Sam Control Item 14073 •(888) 30ID: Ton Splitter x702 Ph: 401-6367 Contact: Austin Cylinder

‘83 John Deere 4850

Ph: (888) 401-6367 x703

‘05 Gehl CTL 70

Item ID: JW-986495 Corley Complete Contact: J Williams Sawmill Ph: (888) 401-6367 x701

Item ID: 14035 Contact: Austin chain conveyer, 8 way splitter, Ph: (888) 401-6367 x703 on

20,000lb goose neck trailer. Item ID 13916. Austin x703

a Chomper Model 16 PDA

automatice firewood processor 4000 SERIES with John Deere power unit with ‘02 Prentice 490

low hours. Control panel includes

Item ID: 14047 tach, oil pressure, Contact: Austinwater temp and amp Cuts logs up to 16”.

Ph: gauges.

(888) 401-6367 x703 One owner and comes with all

manuals and to receipts.

Components 2017 orPurchased 3000 hours. new for $32,500.

Item ID 13865.

Totally loaded with extras.

Has

Best& Value Portable Log Splitter Sam x702 manually.

Great buy onChoose this Deere.From! counterweight/running boards.

Many Models Options to

Only 4200 hours. Factory warranty with 5000 1700 hours. hours, Great in veryrunning good until condition. 35.5 Easily produces condition. tires at 60%. high Tight quality chips with patented ‘Cone’ and Dry. Great value. Item ID drum design.

Can easily load 42’ 13482.

Sam x702 vans John and produce 6 - 8 loads per 2012 Deere 548GIII - Single

day. with Item winch, ID 13882.

Austin x703 arch blade extensions,

EDGERS GANGS 1 new 28L and 3 @&50%.

This is Brewco Saws Two Brewco Saws still a new machine with only 3600 in excellent condition.

Runs great. hours.

Item ID 13780. Sam x702 Item ID 13644.

Sam x702 2012/13 John Deere 200D

- Smallwindows manufacturer in keep PA has LOGGING EQUIPMENT Tinted to help the Includes the JD 22” Hot Saw with FIREWOOD TUMBLER made theheat bestout. valued sun and Itemlog ID splitter.

13856.

40 degree tilt. BANDIT 36” wide flotation • Sturdy HSS Steel Welded Handles up to 32”. Uses 1999 Bandit Tracked Disc Sam x702logs pads.

Simply1900 perfect condition.

• 4’ Diameter Barrel 13HPJohn Honda motor.

Manual start Chipper - Cat Under Carriage at 2013 Deere 437D - This loader New price is $445,000.

Save $40,000 • Clean Out Chute • Removes Debris & Bark as large as 2 ¼” but electronic option 50%only or better.

475 hp Cummins is still like brand new.isItavailable. has been for 380 hours of use!.

Item ID • Works with all of our Double chain Diesel.

7500 Hours.

One owner.

Has Log Lift.

Uses 4-way wedge well taken care of with only 2932 13574. Sam x702 Hydraulic Lift conveyors adjustable toOptional single two way. Series Great Well John maintained.

ItemExcavator ID 13294. hours.

CSI•delimber, Kodiak, 2014 Deere 160G Honda Power Pack Available Value!

PA. Item ID 12062.

Sam x702 Sam x702 3 hydraulic landing gear. You will Low hour excavator with only 1500 Firewood Processor -Made This a Inisclean. not find another loader this Canada homemade processor with a 10’ Item ID 13822.

Sam x702

FIREWOOD PROCESSORS log deck.

HasFeller a hydraulic Excavator - This is still a like new 2014 JD 753J Bunchergrapple, - NEW! Please Call for Details 2010 Shopwith Builtonly Wood Processor kickerOnly that 381 all runs off excavator 3000 hours.

-chain Treatand as NEW! hours. orwith visit us online www.bellsmachining.com -Comes It has a 353 Detroit diesel, 40 of a 4 cylinder Mercedes power a stationary rockland Standard warranty expired, but

1-888-995-1965

Financing inch insert saw, 30 foot Available unit.Extended Has a 4’ chain sawon that kicks thumb that tooth can becircle adjusted has Warranty Major 377 Lumbermens  Issue Issue 364 364 Lumbermens   since since 1986 1986 

❘❘

2004 Bandit Model 4680 - ID hours.

Still aBeast new machine.

Item 3412 Caterpillar 13841.

Sam x702 Diesel engine with John 850 HP. 5300 hrs.-Mill in 2014 Deere 643K There’s good condition.

Just finished 10 not much to say about this feller

Acre clearing job,brand readynew to work! buncher.

It’s still out Remote control.

Big production of the box with only 1452 hours.

 List  seLL  exchange  save ❘  List  seLL  exchange   buybuy  save

GRINDMASTER

SUDDRETH HORIZONTAL GRINDER This is a 60 HP low rpm Horizontal grinder, comes with a blower, and the blower connects to the grinder with a pipe. It has top and bottom infeed rolls. Overall lightly used, in really shape. Width capacity is ‘93good Barko 180B around 30” maybe even wider.

Item ID: 14077 Item ID 13889.

Contact: AustinAustin x703

‘97 Timberjack

Ph: (888)HYDRO-AX 401-6367 x703 360C 1998 HYDRO AX 611EX SAW Item ID:FELLER 14044 BUNCHER HEAD Contact: Sam hours. Bunching with about 8800 Ph: (888) Saw Head 401-6367 has large x702 pocket for accumulation and lifting side shield for notching larger trees before felling. Cummins engine. 28L tires at 60%. Decent running condition.

Item ID 13245. Sam x702

‘95 John Deere C6 2002Farmer HYDRO AX 621E Tree Arouund 12,000 hours on this

Item ID:Working 13920 daily. machine.

Contact: AustinAustin John Deere 548Dx703 Item ID 13884.

Ph: (888) 401-6367 x703 Item ID: 14024 Contact: Sam SAW HEAD 1998 711EX Ph: (888) 401-6367 x702 FELLER BUNCHER capacity!.

Item ID x702 30.5-32 tires at 13421.

40%; Sam Cummins Engine rebuilt 1500 hours ago; BARKO Has a 2000 hour warranty. It comes 8750 hours; Quadco 22” Large 1994 Barko Electric mounted on160B 30.5 -tires at 95%. tree saw head. Heat and A/C knuckleboom, 30' tower boom,head.

75hp Comes with a 22” work. New bearings in Item saw. motor, Rotobec continuous ID 13864.trees Sam x702 Cutting today. grapple, original Item ID 13353.

2015 John5,000 Deere 748LSam - hours.

Thisx702 is KMC (excellent Item still a new condition.). skidder with onlyID1480 KMC TRACK SKIDDER 2500P 13238.

Chris x700 hours. Owned by a construction

JohnBarko Deere Arch Grapple, 1995 775Dual Feller Buncher company that isBno longer needed.

John Deere winch, Model 4000, -Dual Pumps recently redone.

400 hrs arch, winch, joystick controls,

Cummins Engine, Model 6BTA,

on injection pump. always started turn around seat, wide blade and Clark Transmission 28000. good. inID good working order.

22in Item 13738.

Austin x703 HD axles.

Was bought new in Jan KOMATSU kohing head. head works great. and still has factory warranty and

2007 KOMATSU PC220LC Item ID 13185.

Sam x702 an extended warranty can still be w/2009 Log Max 7000XT processing 1999 Barko 160D new bought for this skidder. engine Save a with head. 9700 hours on carrier. 7200

approximately hours. Hour lot of money on1500 this slightly hours on Log Max. Excavatorused style. meter dont Thenew last 2 owners skidder overwork. aFlotation brand one.

Cab guard. pads.

One have only used it condition. tox702 load trucks or owner.

Very good Item ID 13933.

Sam 13464. as aItem backup as needed.

Hasx702 a CTR 2015 JohnID Deere 748LSam - This

delimber, hasnew beenwith rebuilt. skidder is grapple still smells 2008 KOMATSU D61-EX DOZER Boom1000 cylinders have leaks. only hours of use.minor Mounted

Great Condition. 4511 Hours.

Item IDX13694.

Sam x702 on 30.5 32 tires a new Komatsu U/C atwith 95%.

35%set Pads.

94 Barko 275 Excellent 6 tire Way Blade.

Enclosed of chains.

DualFully arch, value winch,

comfort cab.

Great price!5.9seat, with lowcontrols, at hours at 3,500. joystick turnaround Item ID 13570.

Sam x702 CUMMINS continuous grapple. wide blade and HD axles.

Save

Runs IDnew 13740.

Sam on thisGreat!. over aItem brand skidder 2012 KOMATSU D61EX 15 DOZER x702 because is still new.

ItemRippers; ID with onlythis 750 Hours.

Triple

BELL cab with Heat/ Limb Sweeps; Enclosed 13935.

Sam x702 AC; 6 Bell way blade; Undercarriage at 90%; 1990 Super T 440B/C - This Bell has 84/85 John Deere - This Condition! aExcellent brand came new Duetz engine.

Lever skidder in a box to Lavaco Item ID 13459. Sam x702 control,Co 33” pump and and is tranny Power inbar, Colorado a

❘  LumbermensCO.com  Lumbermensmagazine.com

** CALENDAR** en ss s u l a cl r ol e " k in e t h ard ar and NY " st

STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Designed to Meet Your Boonville, New York www.starwebhosting.net/woodsmen/ Mill's Requirements

Crosstable Lumber Grade Printer

Custom SOUTHWEST FOREST PRODUCTS EXPO Inkroll Fri, 25 August - Sat, 26 August Hot Springs, Arkansas Lumber Sizes in 8 CrossTable www.arkloggers.com Grade Printer Different Colors! 72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Panel Printer Thurs, 7 Sept - Sat, 9 Sept

The Tree that Started it All!

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

o o o o o o o o

Selma, North Carolina

Woods Publishing www.midatlantic-logging-biomass­ 4 Lumber Mill Grade Printers Pallet Printer MID-ATLANTIC yea& 0 ADVERTISING SALES expo.com/ LOGGING BIOMASS EXPO Panel Mill Grade Printers se rs /stripe Marker rv Morris Woods Laminated Beam Printers t ing (888) 401-6367 ext. 704 lum he KENTUCKY WOOD EXPO Wet INK & INK Roll Systems i nd ber morris@lumbermens.co u Fri, 15 Sept - Sat, 16 Sept str Edge/ Dual Edge Printers y MARKETING DIRECTOR Lexington, Kentucky Stripe Markers and Stud Printers John Williams http://www.kfia.org/ Hand Stampers and Hammers (888) 401-6367 ext. 701 KentuckyWoodExpo.aspx Custom Designed Marking Systems j@lumbermens.co Available Upon Request. Email : sales@claussenallmark.com DESIGN DIRECTOR Visit : www.claussenallmark.com THE PAUL BUNYAN SHOW Donna Heninger Call : 1-800-252-2736 Fri, 6 Oct - Sun, 8 Oct

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

CUT TO LENGTH **while INFO LINK** CUTTING TIME & LABOR Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

ECT AW L E S S LTI- T OFF U M CU

AM

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

. CH

IA 6” D

BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

SAW G Brute Force AN Mfg. ..................... 31 G Buck RIMEquipment (AIM) ........ 36 T I B

May be sent to­ morris@lumbermens.co

2

AW S P O

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

Midwest Sharpening.............. 26 Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

with onboard log turners, carriage drive, hyd pac for carriage,

Air-activated or carriage knees, husk including

48" bottom saw manual and 36"operated, top saw

cut lumber to length.

STACKING RAC

Cut lumber into multiple shorter pieces, set at either Dyna Products ........................ 35 Sawmill Exchange .................. equal or11various distances from each Empire Hydraulics ................... 8 Select Sawmill .........................

19 other.

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10 Combines a multi-trim Iron Bull ................................... 21andUnion Grove Saw & Knife.. 2, 37 a select-cut to give both high production Kilgore Saw ............................. 22youUniversal Refiner ................... 23 versatility. ................................ l Lignomat ................................. 24andWoodMizer

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

573.663.7711 800.548.6914 bakerproducts.net info@bakerproducts.net

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 11

2014 KOMATSU 450 2011 LIEBHERR A924 RUBBER Phone Only 1100 hours on this 315.284.4126TIRED LOG HANDLER machine, in excellent condition. FaxLiebherr 4 cylinder engine with 315.849.2045 Item ID 13937. Austin x703 Website great fuel economy. 11,230 hours. www.empirehyd.com LIEBHERR Fixed cab riser. Two section boom Email with 38’ reach. Cab protection.

“Precision Under Pressure” 2007 LIEBHERR A924C info@empirehyd.com 4-Wheel drive and steer. Push LOG HANDLER RUBBER blade. Can pull loaded trailer.

TIRED LOG LOADER 13,000 hours. 40’ Reach with two Cleaned, serviced and inspected. section boom. 60” Log Grapple with Tight and dry and ready for work. continuous rotation. Fixed Cab Located in Baltimore, MD. Item ID 13478. Sam x702 Riser with cab guard protection.

LINK-BELT Front push blade. Tight and dry.

Cleaned, Serviced, and Checked out 1997 LINKBELT 3400 HAS for service. Can pull loaded trailer.

REBUILT PIERCE STROKE 4-Wheel drive and steering. Top DELIMBER Quality machine. Would be great 36” Pads on 60% undercarriage. for log yard or mill work.

5221 hours. Good running Item ID 13476. Sam x702 condition. Owner just spent $30,000 on upgrading delimber.

2011 LIEBHERR A904 Item ID 12992. Sam x702 MORBARK RUBBER TIRED LOG HANDLER Liebherr 4 cylinder engine with 1987 MORBARK 27 WCL great fuel economy. 11,230 hours.

NEEDS MOTOR Fixed cab riser. Two section boom Morbark 1000 Knuckle boom loader, with 38’ reach. Cab protection. 3 knife disc, Newer discharge chute, 4-Wheel drive and steer. Can pull New banding around disc, Brakes and loaded trailer. Cleaned, serviced and tires are also OK, Everything works 13428 Victory Ln. // PO Box 124 inspected. Tight and dry and ready well Newer clutch -- with outboard Adams Center, NY 13606 for work. Located in Baltimore, MD. bearing, Had Cummins KTTA 750 HP Item ID 13477. Sam x702 engine -- needs repower.

Item ID 12443. Sam x702

1997 MORBARK MODEL 2400 CHIPPER Has a Cumins diesel engine and runs great. All fluids and filters have been changed.

Item ID 13429. Sam x702 1999 MORBARK 1400 TUB GRINDER ‘16 Halverson H140 Loader w/Cab; 4200 hours; Very good condition.

Located Skidsteer (DEMO) in PA.ID: JW-909632 Item Item IDJ 13361.

Sam x702 Contact: Williams Ph: (888) 401-6367 x701 2006 MORBARK 6600 HORIZONTAL GRINDER Approx. 6000 hours on this well maintained machine. Has New Cat Dealer Rebuild 1000HP Engine at 5000 hours. 42” X 665/8” Hammermill; variable speed infeed system; Hammermill drive includes all belts, sheaves, bushings & shields. Engine gauge panelKMC & emergency down ‘13 2500 shut Track system located in an anti-theft Skidder console. Electronic rpm sensor & auto system. 430 Gallon Item ID:feed 14078 fuel tank.

238 Gallon hydraulic Contact: Austin oil tank.

IQAN control system.

Ph: (888) 401-6367 x703 Dust suppression system. Hyd operated debris containment FunctionThis radio offdoor. onto16 a conveyor. is aremote. very well built processor. Item ID 13820.

Sam x702

Super package! Optional new knife skin - $20,000 which is half price of new.

Item ID 12692. Sam x702 MORBARK 1200 TUB GRINDER Powered by a 3412 Cat engine, 600-hp. Tilt tub. Hours are ‘93 Barko unknown.

Please180B call Daren at Item ID:for 14077 Ext. 702 more details.

Contact: Item ID Austin 12919. Sam x702 Ph: (888)WOLVERINE 401-6367 x703 1995 MORBARK WOLVERINE 3-WHEELED FELLER BUNCHER S/N 4073. Only 1000 hours on new JD 4 cylinder engine.

Recently replaced turbo. 23.1 tires at 50%. 16” Rapid Buncher shear head. Machine is fast and in very good condition.

Item ID 12531.

Sam x702 ‘95 John Deere C6 PRENTICE

Tree 1988Farmer PRENTICE 210B

Item battery ID: 13920 New and starter a Contact: Austin year ago, new alternator less Ph: (888) 401-6367 x703 than 2 years ago. Continuous rotation grapple, has 3-53 detroit engine, lever controls, plumbed for bucksaw. Mounted on a 1978 GMC capacity!.

Item ID 13421.

Sam x702 Brigadier withBARKO 6-71 detroit with a 10 speed. Runs everyday.

1994 Barko 160B - Electric Item ID 13703. Sam x702 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID Firewood Processor - This is P.O. Box 170 • Prentice WI 54556-0170 • 800-243-5438

13238. Chris x700 a Chomper Model 16 PDA www.multitekinc.com • sales@multitekinc.com ‘05 Gehl CTL 70 1995 Barko 775 B Feller Buncher automatice firewood processor

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

Multitek Firewood Processors

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

with John Deere power unit with

- Pumps recently redone. 400 hrs

tach, oil pressure, water temp and

good. in good working order. 22in

low hours. Control panel includes

on injection pump. always started

Increase Your Productivity and Profitability kohing head. head works great. amp gauges. Cuts logs up to 16”.

• Quality Equipment to Reduce Labor Costs Item ID 13185. Sam x702 chain conveyer, 8 way splitter, on One owner and comes your with all Circular Saw manuals or Bar and & Chain 20,000lb goose neck•trailer.

Item ID receipts.Models Purchased

1999 Barko 160D - new engine with

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

delimber, grapple has been rebuilt.

Made in the U.S.A. Boom cylinders have minor leaks.

Diesel. 7500 Hours. One owner.

94 Barko 275 - Excellent value

condition. Easily produces high

FromItem ID 13865. approximately 1500 hours. Hour 13916. Austin x703 • 7 Models to Choose new for $32,500.

• Production Ratings up to 5.5 Full Cords Per Hour meter dont work. The last 2 owners Best Value Portable Log Splitter Sam x702 have only used it to load trucks or - Small manufacturer in PA has LOGGING EQUIPMENT as a backup as needed. Has a CTR made the best valued log splitter.

BANDIT

drum design. Can easily load 42’

13HP Honda motor. Manual start

with 1700 hours, in very good

quality chips with patented ‘Cone’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot 377  Issue 364

Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens  since 1986

❘

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

Item ID 13694. Sam x702

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

1992 PRENTICE 210D LOADER Excellent condition, very tight loader mounted on a 1989 Mack truck with very good tires.

Item ID 13654. Sam x702 1997 PRENTICE 210E New 5.9 cummins engine, turntable bearing and seal, fuel pump and battery.

Joystick, Heat and A/C, boom repinned, cylinders repacked.

Total hours at The Tree 12000. Bucksaw hookup.

This loader is that Started used to feed a chipper. it All!Sam x702 Item ID 13795.

Since 1986, Lumbermens has 1999 PRENTICE 210E published a monthly circular Comes with a bucksaw.

Levers, reaching sawmills, loggers, pallet makers, recyclers and 11000 hours. Repacked all cylindustrial plants inders andwoodworking valve body.

This worldwide. loader has only been used to cut

up logs into 9’ lengths. Never PUBLISHER Publishing used as Woods a delimber loader.

ItemADVERTISING ID 13784. Sam x702 SALES Morris Woods

(888)PRENTICE 401-6367 ext.

704 2014 2384C morris@lumbermens.co LOADER PACKAGE with CSI 264 UltraDIRECTOR Delimber and MARKETING Rotobec 4048 JohnGrapple.

WilliamsOnly 1050 401-6367 ext. 701 hours!(888) Mounted on trailer with hyj@lumbermens.co draulic stands.

Excellent condition.

Contractor shutting down job.

‘06 Brewco B1600 DESIGN DIRECTOR Donna Heninger Item ID 13577.

Sam x702

Resaw

EQUIPMENT REPS Item ID: 13862 Sam Wall Contact: Samext. 702 (888) 401-6367 sam@lumbermens.co Ph: (888) 401-6367 x702 Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

John Deere 548G2

Send address changes to: Item ID: 14042 Lumberman's Exchange P.O. Box 1916 Contact: Austin Columbia, TN 38402 Ph: (888) 401-6367 x703

The Lumberman's Exchange is published

by Woods - 3410 monthly hours. $32,000 in recent Publishing, P.O. Box 1916, upgrades repairs.

Fecon Columbia, TN and 38402.

All rights reserved.

AllMulching editorial/Head. advertorial BH250 Item ID submissions are used at the 13502.ofSam discretion the x702 publisher and may be edited for purposes 2011 Tigercat 620Dof- clarity This is a and space. Although all efforts have low hour skidder with only been made to ensure accuracy of 5500 content submitted by advertisers hours on a cummins engine and and writers, the Lumberman's a fire suppression Comes Exchange, its principlessystem. and associates, are not held liable for mounted on 35.5 tires at 50% back errors or omissions. Reproduction, and 40% front and good chains in whole or part, is prohibited with­ on out written consent. all 4 tires. Has the bigger 630 axles ©2017 Woods Publishing

** CALENDAR**

2432 2010 PRENTICE SKIDDER It has 30.5 tires al the way around and has 6,000 hours on the machine.

Item ID 13382. Sam x702

NY STATE WOODSMEN'S FIELD DAYS

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

SOUTHWEST FOREST PRODUCTS EXPO

BANDMILLS & HEADSAWS

PRENTICE 310E Fri, 18 August - Sun, 20 August Boonville, New York Good loader for the money. www.starwebhosting.net/woodsmen/ Item ID 13762. Sam x702 PRENTICE 120C BOOM TRUCK Great tires, new paint, & lights, Fri, with 25 August - Sat, 26 August a 350 Cummins Engine 3 stage jake. Hot Springs, Arkansas www.arkloggers.com Item ID 13900. Austin x703

Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck

72ND ANNUAL GREAT LAKES

1994 PRENTICE 180D LOG LOADER LOGGING & HEAVY EQUIPMENT EXPO 11,793 hours, Machine is in good Thurs, 7 Sept - Sat, 9 Sept condition, it has been sand blasted Escanaba, Michigan and painted, low pro tires 17.5.

Item ID 12759. Sam x702 MID-ATLANTIC LOGGING & BIOMASS

with 44 inch wheels, and all the

210 PRENTICE LOADER Selma, North Carolina MOUNTED ON 2006 TRAILER www.midatlantic-logging-biomass­ MID-ATLANTIC Excellent condition. expo.com/ LOGGING & BIOMASS EXPO Item ID 13505. Sam x702

pressure guides. Top Casting wheel

bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough

Fri, 15 Sept - Sat, 16 Sept

is supported on both sides. This

Every ReputableisWide Band an extremely accurate machine Supplier Offers in ve1y good condition, Cuts 130 KENTUCKY WOOD EXPO

LATE 80’S PRENTICE 210 Fri, 15 Sept3- High feet aSteel minute also has CLT presses.

Sat, 16Quality Sept Swedish LOADER Lexington, Kentucky 3 3” – 8” Band WidthItem ID 13876. Austin x703 This is a late 80’s model, it had a http://www.kfia.org/ S & W 125 Band Mill with 3 16 to 20 Gage new motor installed 2 years agoKentuckyWoodExpo.aspx with around 3,000 hours on it, 3 Double Cut OptionsCaterpillar generator - Low hours on the mill, electronic computer Set also comes with a circle saw. THE PAUL BUNYAN SHOW 3 Choice of Swage or Stellite Item ID 13879. Austin x703 Fri, 6 Oct - Sun, 8 Oct works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 Cambridge, Ohio BUT ONLY THE www.ohioforest.org hours ready to run. Item ID 13434.

WOLVERINE

‘05 Woodmizer LT300

Sam x702

BY MENOMINEE SAW GUARANTEES

** INFO LINK**

Bell's Machining ..................... 27

CARRIAGES & DRIVES • Cutting Edge Plasma 2010 Welds Cardinal HD Carriage • The Industry’s HighestCarriages Band Saw Capacity (Sawmill) - Cardinal Carriage line it includes carriage • Quick Delivery from our HUGE Inventory M&F Gauge ............................. 28 with onboard log turners, carriage • Fast Program Meadows Mill,Sharpening Inc. ................ 33& Exchange drive, hyd pac for carriage, to Keep YOU Running Menominee Saw ..................... 29 sawyers cab, computer controls, • Competitive Pricing cabinet with electronic drives for Metal Detector's Inc. .............. 30

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

Item ID: 14031 Contact: Austin B &Ph: B Mfg . ...............................

(888) 401-6367 x703 18

B. H. Payne .............................. 16 Baker ...................................... 5, 7

carriage knees, husk including

CRD Metalworks .................... 25

And ONLY Menominee Gives You Everything 48" bottom saw and 36" top saw Morbark .....................................

You need in a 9Wide Band Saw – Plus Multitek ...................................

Expert Service 12 from the Industry’s Most Knowledgeable Staff.

Piper's Saw Shop....................

13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................

20 Call Menominee

Buck Equipment (AIM) ........ 36 Corley Mfg .............................. 32

‘14 B66TD Rotochopper Item ID: 13838

Dyna Products ........................ 35 Contact: Sam

Got a Wide Band Problem?

Saw Today and You’ll Sawmill Exchange ..................

11 Learn Why More Mills Trust the Pro!

(888)Hydraulics 401-6367 Ext. 603 8 Empire ...................

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Item Machinery ID 13408. Sam x702 Hahn ......................

3

The Paul Bunyan Show ......... 39

Please see us at 2014 Boiler Tigercat 630D Grapple Hurst .............................

14 Skidder - Dual Arch Grapple. Just Iron Bull ................................... 21 1990 hours. 3 year/5000Booth hour #421PT Kilgore Saw ............................. 22 warranty. 35.5 tires with dualing Lignomat ................................. 24 rings at 60%. Wide blade. Winch.

STACKING RAC

Thomas Industrial Controls..... 10

TOLL FREE 1-800-582-0470

900 16th St., Menominee, MI 49858 Tel: 906-863-2609 Fax: 906-863-1147 Universal Refiner ................... 23 Email: info@menomineesaw.com

Union Grove Saw & Knife.. 2, 37

www.BakerProducts.net WWW.MENOMINEESAW.COM 800.S48.6914 I S73.663.7711

WoodMizer ................................ l

and no winch. Center pins are tight Item ID 13526. Sam x702 - USED FORESTRY EQUIPMENT FOR SALE  SELL EQUIPMENT TODAY ❘ the grapple 24/7 SUPPORT SALE l§ TODAY 0 SUPPORT 2015❘ Tigercat 234BYOUR Loader - Model and extra fuel tank.

Item ID 13929. roatation on w/ a Sam x702

234B. Only 300 hours on this

30’ reach on the boom. Joystick

❘ 2006  (888) 401-MENS L! 401-MENS Tigercat 630C GrappleNO. 13

Skidder - Very good running

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

PROTECT Them ALL ® With Pro-Tec-To Wrap

“Precision Under Pressure”

‘16 Halverson H140 Air Lines Skidsteer (DEMO)

Hydraulic Lines – Fuel Hoses – Electric Wire Bundles – ControlItem Cables ID: JW-909632

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

Contact: J Williams Ph: (888) 401-6367 x701

PRO-TEC-TO® WRAP & PRO-TEC-TO® SLEEVE CUT YOUR DOWNTIME AND YOUR COSTS!

Protection Against Pinching, Crushing, Rubbing & Abrasion – EVEN UV RAYS! Both are Impervious to Oils and Solvents.

For The Distributor Nearest You, Call

Provides Maximum Protection for Logging, Construction & Stationary Applications Like: • Debarker Buggies • Pantograph Arms • Forklift Masts • Wheel Loaders • Skidder Grapples • Knuckleboom Loaders • Fellerbuncher Heads • Harvesting Heads • Stroke Delimbers • Dozer Blades

800-355-1250 ‘13 KMC 2500 or VisitTrack www.pro-tec-toproducts.com Skidder

Anywhere Wires Are – Pro-Tec-To Products 13428 VictoryHoses Ln. // & PO Box 124 Offers Maximum Protection, Adams Center, NY 13606 Lower Costs, Reduced

Item ID: 14078 OEM’s, Repair Facilities & Contact: Austin Distributor Inquires Welcomex703 Ph: (888) 401-6367

®

Downtime and Less Spills!

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot 377  Issue 364

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

‘95 John Deere C6 Tree Farmer Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 15

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

“Precision Under Pressure”

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

FOR SALE

Item ID: 1267

‘13 KMC 2500 Track HudSon H360 Portable Sawmill Skidder Item ID: 8841

Item ID: 14078 2016, 1000 Hours, 35HP Motor, Hydraulic Log Dog, Hydraulic Back Stop, ProCut Saw Blade 13FT 11in Contact: Austin 7/8, TS 1 1/4 PV 121 Peavy Hook, KY area Ph: (888) 401-6367 x703

Contact: LIZ Email: Liz@lumbermensco.com Phone: 888-401-6367 EXT 701 off onto a conveyor. This is a very

well built processor. Item ID 13820.

TIGERCAT 720B

H O T

B U Y S

Sam x702 Item ID: 542

‘05 Gehl CTL 70

‘83 JohnShingle Deere Desjardin Machine Item ID: 1970 4850

PTO driven, Blade 37 1/2, runs Item ID: 14073 great Massachusetts Contact: Austin Area

Ph: (888) 401-6367 x703 Contact: LIZ Email: Liz@lumbermensco.com Phone: 888-401-6367 EXT 701 with 1700 hours, in very good condition. Easily produces high

quality chips with patented ‘Cone’

Firewood Processor - This is cutter.

This feller buncher comes with a high speed "Quadco" Odometer shows 7000hrs. 500hrs ago a new motor (rebuilt) Chomper 16 PDA was installed.a90% tires tread.Model The A/C doesn’t work. It's been parked for about 4-5 months. READY TO GO!! automatice firewood processor

Contact: JOE Item ID: JW-986495 with John Deere power unit with Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170 Contact: J Williams low hours. Control panel includes Ph: (888) 401-6367 x701

tach, oil pressure, water temp and

CAT Cuts 573logs up to 16”. amp gauges.

Item ID: 7976 chain conveyer, 8 way splitter,Feller on BuncherOne owner and comes with all in good condition. Tire tread is about 50% front, 30% back. Works and runs as it should. It's available and ready 20,000lb goose neck trailer. Item ID manuals and receipts. Purchased to work!

13916. Austin x703

Best Value Portable Log

new for $32,500. Item ID 13865.

Contact: JOE Email: Joe@lumbermensco.com Splitter Sam x702EXT 709 OR 801-362-2170 Phone: 888-401-6367

- Small manufacturer in PA has

made the best valued log splitter.

PRENTICE 410EX

LOGGING EQUIPMENT BANDIT

Handles logs to 32”. Uses Item ID:up 3280 drum design. Can easily load Tight 42’ machine, 13HP Honda motor.

Manual and start no issues!

It sits on a Pitts-trailer it's

1999 Bandit 1900 Tracked Disc

day. Item ID 13882. Austin x703

Has Log Lift. Uses 4-way wedge

Diesel. 7500 Hours. One owner.

Brewco Saws - Two Brewco Saws

Value! PA. Item ID 12062. Sam x702

Item ID 13644. Sam x702

4 BUNK processor TRAILER homemade with a 10’ Item ID: 4268 log deck. Has a hydraulic grapple,

vans and produce 6 - 8 loads

EDGERS & GANGS

currently operating, everyday! Owner just installed a brand new grapple but on July 11. A/C not working tires tread per electronic optionproperly, is available.

60%. Works and runs smoothly. READY TO GO!

Contact: JOE adjustable to single two way. Great Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

in excellent condition. Runs great.

FIREWOOD PROCESSORS

Firewood Processor - This is a

Log trailer with 4 bolsters in good conditions.

2010 Shop Built Wood Processor chain and kicker that all runs off Ready to GO!

- It has a 353 Detroit diesel, 40Contact: JOE of a 4 cylinder Mercedes power

Email: Joe@lumbermensco.com OR 801-362-2170 30Phone: foot 888-401-6367 unit. Has EXT a 4’709 chain saw that kicks

Lumbermens  since 1986

‘95 John Deere C6 Tree Farmer

Contact: LIZ Email: Liz@lumbermensco.com Phone: 888-401-6367 EXT 701

Adams Center, NY 13606 $ 650,000 Call PETE at 707-815-3640

377  Issue 364

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

1995 Pendu Stacker

120 Acres contains at Least 50 % Redwood, 10 To 15 % Doug Fir, the remaining is Tan Oak and Madrone, with a very Good Running Spring.

In Mendocino County, in Northern California 13428 Victory Ln. // PO Box 124

inch insert tooth circle saw,

‘93 Barko 180B

❘

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Well maintained. Item ID 13294.

Sam x702 TIMBERPRO 735B Item ID: 38494680 2004 Bandit Beast Model

This machine has had 2Diesel owners. The undercarriage 3412 Caterpillar engine

is at 70%. It has the 8.3 Cummins 300hp All maintenance and service upon request.

It's with 850 HP. 5300 records hrs. Mill in currently running daily. Works spotless. Genuine machine! good condition. Just finished 10

Contact: JOE job, ready to work!

Acre clearing Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 Remote control. Big production 801-362-2170

 List  seLL  exchange  buy  save

Item ID: 13920 TIMBERJACK 560C Contact: Austin Item ID: 1593 Ph: (888) 401-6367 x703 This skidder comes with a brand new set of tire

chains. It has a cummins engine. Tires tread 25%, at best. A/C is not working. About 200hrs ago they put a new head on it. Good working machine, absolutely nothing wrong with it.

capacity!. Item ID 13421. Sam x702 Contact: JOE BARKO Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 1994 Barko 160B - Electric

801-362-2170 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone.380 400 hrs TIMBERJACK Item ID:always 2323 started on injection pump.

Skidder in has the working dual 100in. order.

Exco grapple. good. good 22in

Transmission is Eaton 3 speed powershift. Owner in the front between transmission and the torque converter, most likely a gas seal, a $90-$100 fix.

Item ID 13185. Sam x702 Tires tread 40% on three tires, 10% on the one tire.

Good machine the price and for the conditions.

1999 Barkofor 160D - new engine with has had ithead. parkedhead since June.

There's a leak kohing works great.

approximately Contact: JOE 1500 hours. Hour Email: Joe@lumbermensco.com

meter dont work. The last 2 owners Phone: 888-401-6367 EXT 709 801-362-2170

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500.

5.9 BAKER BAND RESAW

Cgrapple.

CUMMINS Model continuous Item ID: 8189 Runs Great!. Item ID 13740. Sam

This is a BRAND NEW UNUSED multi-head band

x702 resaw. The project that owner was going to work

on got cancelled and it was too late to return machine. Paper work, receipts and original invoice can be provided upon requests. NEW CONDITIONS! 1990 Bell Super T - This Bell has

BELL

JOE Duetz engine. Lever aContact: brand new Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 control, 33” bar, pump and tranny

801-362-2170

❘

 LumbermensCO.com

** CALENDAR**

JOHN DEERE 648G Series III Item ID: 746

Dual arch, tires tread 30%, 30.5 This was a repo from in Alabama.

A/C not working properly. Owner bought it from them and used it for about 18mo. Nothing wrong with it. Grapple needs new packing ($600 fix). Good skidder, reliable!

NY STATE WOODSMEN'S FIELD DAYS 18 August - Sun, 20 August

Fri, Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

Boonville, New York www.starwebhosting.net/woodsmen/ 2014 John Deere 1110E Item ID: 5678

SOUTHWEST FOREST PRODUCTS EXPO Prentice 1190T Tracked Feller Buncher 1400 original hours. 8 wheel, swiveling self leveling cab,

clean straight blade, 360s 26 heavyAugust duty grapple, double Fri, 25 August - Sat,

Item ID: 4677

2011 Prentice 1190T Quadco 22" 360 head 5900 hours, tracks undercarriage about 80% no issues good machine all cat parts except Engine self-leveling buncher.

extender makes boom 32' radial forestry tires, 1 set of Hot Springs, tracks, rated for 5 1/2Arkansas cords, 6 cylinder John Deere diesel Very very well kept machine, has sat in shed most of its www.arkloggers.com life. Call for more pictures!

MARK 72ND Contact: ANNUAL GREAT LAKES Contact: MARK Email: Mark@lumbermensco.com Email: Mark@lumbermensco.com has LOGGING & HEAVY EQUIPMENT Phone: 888-401-6367 EXT 708 EXPO Phone: 888-401-6367 EXT 708 OR 702-875-2703

702-875-2703

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 Johnmorris@lumbermens.co Deere 444 Wheel Loader

Item ID:DIRECTOR 524 MARKETING

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Timberjack 240D Item ID: 3443

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

Contact: MARKDIRECTOR DESIGN Email: Mark@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 708

702-875-2703 EQUIPMENT REPS

Contact: MARK Email: Mark@lumbermensco.com THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct Phone: 888-401-6367 EXT 708

702-875-2703 Cambridge, Ohio

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

feed deck 20 foot out feed deck Contact: AUSTIN Email: Austin@lumbermensco.com with 44 inch wheels, andEXT all the Phone: 888-401-6367 703

931-797-8029 bells and whistles, its a production machine, with air strain conveyers

Valmet that 430FXL Tracked Feller Buncher go up and down, with airbags,

it completely gone through brand new bearings in the wheel last summer

Johncylinder, Williams breaks need pressure needs seat, crack in windshield, comes401-6367 with forks and bucket.

Works great!

(888) ext. 701 Call for more pictures

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

pack, 80ft vibrating conveyer, HMC Debarker, Morgan

Slab edger, log deck, and more. has been3 strand rebuilt, it has a 24foot in

pressure Top Casting wheel Selma, North Carolina 2nd owner 2 operator machineguides. midwest equipment & supply roadbuilders machinery & supply in Springfield, MO did the work. Call for more pictures! www.midatlantic-logging-biomass­ is supported on both sides. This Contact: MARK expo.com/ is an extremely accurate machine

240D gearmatic winch, winch rebuilt recently, dry maLexington, Kentucky chine, tight pins in blade and centers, engine needs govenor adjusted, heavy duty transfer case, 2x50% http://www.kfia.org/ 2x40%, 32 tires Great machine ready to work! Call for KentuckyWoodExpo.aspx more pictures

j@lumbermens.co

2016 Complete sawmill includessince precision 10 hours on thispackage, machine itchip

Item ID: 9495 MID-ATLANTIC LOGGING & BIOMASS 2900 intermittent 8013 hourstwo tracks 24" trackof slides continuous rotation it head includes sets Mcdonough Fri, 15 Sept - Sat, 16 Sept everything was replaced and gone through in 2014 only 749 hours since

Woods Publishing

ADVERTISING SALES

8720 Danckaert Item Band ID: Resaw - Roughly

www.ohioforest.org

Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703

in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

CAT 517 Tracked Grapple Skidder Item ID 13876.

Item ID: Austin 3049 x703

2007 Cat 517Stracked fixed boom single arch almost new & Wskidder 125 Band Mill with tracks and undercarriage, 7600 hours, all new glass, new hard bar, turbo work done, great motor, great transmission pulls hard Caterpillar generator - Low hours in all gears, tranny torque in good shape Call for more pictures!

on the mill, electronic computer Set

Contact: MARK works,1 1/2" or 2" band, 22ft. track Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703 Cat 3406 140KW Genset, 12,400

** INFO LINK**

hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN

Kilgore Saw ............................. 22

Universal Refiner ................... 23

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Lignomat ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 WoodMizer ................................ l Cell: www.BakerProducts.net 931-797-8029

 SELL YOUR EQUIPMENT TODAY TODAY l§

800.S48.6914 I S73.663.7711

❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 17

B U Y S

Since 1986, Lumbermens published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

BANDMILLS & Sawmill HEADSAWS Hurdle #2

H O T

The Tree that Started it All!

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

B U Y S H O T

MACK CHN613

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

“Precision Under Pressure”

Item ID: 761

2006 model with Mack 410Hp engine, Eaton fuller 10 speed transmission, 44k reads on camelback suspension, 744,000 frame Miles. Brand new tires! Road ready!

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Kenworth T800 Log Truck & Loader

Tigercat 604 Item ID: 7436

Item ID: 6006

Good rubber and less than 4000 hours, in excellent condition!

1994 model with 1998 Grizzly 215c loader. 15000 Miles on fresh engine overhaul. 600,000 frame miles. Work ready setup!

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

‘93 Barko 180B

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: 14077230A TIMBERJACK

Contact: Austin Item ID: 9450 Ph: (888) 401-6367 x703 1989 Model with factory 5.9 Cummins engine, power shift

Item ID: JW-909632 transmission, Hercules winch. Working daily.

Contact: J Williams Ph: (888) 401-6367 x701Contact: AUSTIN

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

CAT 928G

Item ID: 6056 2007 model with 5400 hours, comes with log forks, & 4 in 1 bucket.

‘95 John Deere C6 Tree Farmer

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703 Timberjack 380C

‘13 KMC 2500 Track Skidder Timberjack 230

John Deere 548G3 Item ID: 985

Item ID: 410

Item ID: 1977

Item ID: 14078 Contact: Contact: AUSTIN Austin Ph: (888) 401-6367 x703 Email: Austin@lumbermensco.com

This skidder has 4700 original hours and comes with a winch. 13428 Cab has heatVictory & ac, tires are 23.1// 26. In excellent Ln. PO Box condition!

124 Adams Center, NY 13606 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

95’ long frame model with JD winch. Skidder is in excellent condition. Item ID 13421. Sam x702 capacity!.

off onto a conveyor. This is a very

Contact: AUSTIN BARKO Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 1994 Barko 160B - Electric

931-797-8029 knuckleboom, 30' boom, 75hp

Sam x702 Item ID: 2803

grapple, 5,000 original hours.

Phone: 888-401-6367 EXT 703 OR 931-797-8029

L O G G I N G

built processor. Item ID 13820.

(2) 380well TIMBERJACK SKIDDERS

‘05 Gehl CTL 70 International 520B

‘83 John Deere 1981 Front End Loader. ONLY 2,600 hours. Tires are 4850 like-new.

Alternator is the only thing that was changed!

Item ID: 5838

125hp engine. Been kept parked with very light use!

Item ID: 14073 Contact: Austin Contact: JOE Email: Joe@lumbermensco.com Ph: (888) 401-6367 x703

Phone: 888-401-6367 EXT 709

801-362-2170 with 1700 hours, in very good

20,000lb goose neck trailer.

13916. Austin x703

Best Value Portable Log

uses just a little bit of oil but the motor is good and strong, gearmatic new 200' cable put on a few months Item ID winch manuals andof receipts.

Purchased ago tires 3 at 75% 1 at 50% redone axle housing.

- Small manufacturer in PA has

Email: Mark@lumbermensco.com adjustableEXT to single way. Great Phone: 888-401-6367 708 OR two 702-875-2703

Value! PA. Item ID 12062. Sam x702

Firewood Processor 2005 Timbco 425- This EXLis a

Item ID: 14275 with a 10’ homemade processor

with 2015 sp761lf harvester head 1000 hours on head and 2015 FIREWOOD PROCESSORS log deck. Has a hydraulic grapple, dasa 5 computer system frame hours 10,900 Undercarriage

75% no leaks dry, rebuilt final drive the other final drive is new, 2010 Shop Built Wood Processor chain and drive kicker thatnew allimplement runs off engine has ECM, new swing gear box, pump

inch insert tooth circle saw, 377  Issue 364

of a 4 cylinder Mercedes power

Contact: MARK 30 Email: foot Mark@lumbermensco.com unit. Has a 4’ chain saw that kicks Phone: 888-401-6367 EXT 708 OR 702-875-2703

Lumbermens  since 1986

❘

new for $32,500. Item ID 13865.

Contact: MARK Email: Mark@lumbermensco.com Splitter Sam x702 Phone: 888-401-6367 EXT 708 OR 702-875-2703

day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge Contact: MARK

- It has a 353 Detroit diesel, 40

on injection pump. always started

transmission was rebuilt about 3 years chain conveyer, 8 way splitter,Cat on518 cable One owner and comes with all ago

woods ready, log arch, new head gasket 500 hrs. ago, new

Item ID 13644. Sam x702

- Pumps recently redone. 400 hrs

Item ID:Cuts 14273 amp gauges. logs up to 16”.

vans and produce 6 - 8 loads per but electronic linkage in blade, family ownedoption machine.is available.

in excellent condition. Runs great.

1995 Barko 775 B Feller Buncher

processor

tach,518 oil pressure, water temp and CAT Cable skidder

2004 650H roughly 8500 hours, with good winch new drum design. Can easily load 42’ 13HP Honda motor. start cable, 35- 40%, 6 way blade, caged cab,Manual forestry package,

Brewco Saws - Two Brewco Saws

13238. Chris x700

Item ID: JW-986495 with JohnEXT Deere power unit with Phone: 888-401-6367 703 OR 931-797-8029 Contact: J Williams low hours. Control panel includes Ph: (888) 401-6367 x701

condition. Easily produces high John Deere made the best valued log splitter.

650H Forestry Dozer Item ID:up 14274 quality chips with patented ‘Cone’ Handles logs to 32”. Uses

EDGERS & GANGS

(excellent condition.). Item ID

Firewood Processor - This One skidder was burnt halfway but lots isof extra usable parts.

Both are cable machines. a Chomper Model 16 PDA Contact: AUSTIN automatice firewood Email: Austin@lumbermensco.com

LOGGING EQUIPMENT BANDIT

motor, Rotobec continuous

John good. in goodDeere working437C order. 22in Item ID:works 1020 great. kohing head. head

2010 model with 8500 hours, comes with a bucksaw,

Item IDhad 13185.

Sam x702on it and primarily has never a delimber mounted been used around a sawmill.

1999 Barko 160D - new engine with Contact: AUSTIN approximately 1500 hours. Hour Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 meter dont work. The last 2 owners

931-797-8029 have only used it to load trucks or as a backup as needed. Has a CTR

Bell Ultra C

delimber, has been rebuilt.

Itemgrapple ID: 1025 Boom have minor leaks.

Chipper - Cat Under Carriage1996 at model withcylinders Joystick control and Koehring Head.

Item ID 13694. Sam x702 50% or better. 475 hp Cummins 1999 Bandit 1900 Tracked Disc

Contact: AUSTIN 94 Barko 275 - Excellent value Diesel. 7500 Hours. One owner.

Email: Austin@lumbermensco.com

with low EXT at hours 3,500. 5.9 Well maintained. Item ID 13294.

Phone: 888-401-6367 703 ORat931-797-8029 Sam x702

2004 Bandit Beast Model 4680 -

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam 1991 Timberjack 450B

x702 Item ID: 1826 with 850 HP. 5300 hrs. Mill in New pins & bushings. TightBELL skidder all around.

Ready to drag some 1990 Bellwood.

Super T - This Bell has good condition. Just finished 10 3412 Caterpillar Diesel engine

Contact: AUSTIN a brand new Duetz engine. Lever Acre clearing job, ready to work!

Email: Austin@lumbermensco.com

control, 33” pump and tranny Remote control. Big production Phone: 888-401-6367 EXTbar, 703 OR 931-797-8029

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

CAT 525D

Item ID: 8940

Works and runs as it should. Great condition! 3 of the tires are at 50% tread, 1 is brand new, with a 6068T engine. All updates done, hasn't missed NYany!

STATE

Fri, Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

WOODSMEN'S FIELD DAYS 18 August - Sun, 20 August

Boonville, New York Prentice 210E www.starwebhosting.net/woodsmen/ Item ID: 8256

John Deere 650H Forestry Dozer SOUTHWEST FOREST PRODUCTS EXPO Knuckleboom loader.

Needs new batteries and Item ID: 14284

also needs the small gear on the Rotobec head.

Fri, 25 August - Sat, 26 August It has saw and delimber hookups, but no saw nor

2002 650H LT Great running condition, no leaks, dry, everything works as should, good winch.

delimber.

Ready to be shipped! Good machine, Hot Springs, Arkansas gets the job done, works as it should! www.arkloggers.com

Contact: JOE Contact: MARK Joe@lumbermensco.com 72ND Email: ANNUAL GREAT LAKES Email: Mark@lumbermensco.com Phone: 888-401-6367 EXTEXPO 709 Phone: 888-401-6367 EXT 708 OR 702-875-2703 has LOGGING & HEAVY EQUIPMENT

Since 1986, Lumbermens published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and John industrial woodworking plants worldwide.

PUBLISHER

801-362-2170

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

Deere 648G Series III Item ID: 4351

MID-ATLANTIC LOGGING & BIOMASS Motor & transmission has been rebuilt. Front and rear ends have been gone thru. Cold air/heat works, radio Fri, 15 Sept - Sat, 16 Sept Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

works but needs an antenna! Rear tires are NEW, front

Woods Publishing tires 70% tread.

JOE MID-ATLANTIC ADVERTISING SALESContact: LOGGING & BIOMASS EXPO Email: Joe@lumbermensco.com

Morris Woods Phone: 888-401-6367 EXT 709 OR 801-362-2170 (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR

210 Terex Wheel Loader Item ID: 14283

Timberpro 735TL

KENTUCKYItem WOOD ID: EXPO 14279 Fri, 15 Sept Sat, 16 Sept 2011 timber pro 735B 11800 hours, 20" quadco hotsaw, tracks/undercarriage 35% no leaks dry, no issues, everyLexington, Kentucky

day runner heat/air both work fire suppression system John Williams 2013 210 terex loader . 1560. Hrs Excellent http://www.kfia.org/ new goal drive new swing turner all hard stuff redone oil change every 200 hours grease everyday (888) 401-6367 ext. 701condition everything works as should! KentuckyWoodExpo.aspx j@lumbermens.co

DESIGN DIRECTOR Donna Heninger

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Contact: MARK

THE Email: PAUL Mark@lumbermensco.com BUNYAN SHOW 888-401-6367 Fri,Phone: 6 Oct - Sun, 8 OctEXT 708

702-875-2703

** INFO LINK**

John Deere 643K

Item ID: 160 BANDMILLS & HEADSAWS

Tight machine, everything works as it should. Brand Danckaert Roughly new front tires, Band back tiresResaw 50% tread.- 6300 hours. Hydraulic and electrical plumbing durable and reliable.

10 hours on this machine since itGO! Good cooling system and fuel efficiency. READY TO

has been rebuilt, it has a 24foot in Contact: JOE feed deck 20 foot out feed deck Email: Joe@lumbermensco.com Phone: 888-401-6367 709 with 44 inch wheels, andEXT all the

801-362-2170 bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130

Cat 272D skidsteer

feet a minute also CLT presses.

Item ID:has 14282 Item ID 13876. Austin x703 2015 Cat 272D skidsteer like new 260 in 125 excellent Shrs &W Band condition!

Mill withEverything runs and works as should Caterpillar generator - Low hours Contact: MARK on the mill, electronic computer Set Email: Mark@lumbermensco.com Phone:1/2" 888-401-6367 works,1 or 2" band,EXT 22ft.708 track

702-875-2703 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 19

L O G G I N G

The Tree that Started it All!

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

John Deere 648H Grapple Skidder

Quadco 22B Hot Saw Head

“Precision Under Pressure”

Phone 315.284.4126 Item ID: 7750 Fax 315.849.2045 2012 model with very low hours, has only been used toWebsite cut softwood. www.empirehyd.com Email Contact: AUSTIN info@empirehyd.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Item ID: 14281 2011 648H 10,879 frame 30.5x32 65-70% tires, great machine, kept very well, filters changed and maintenance by john deere every 3,000 hours, runs as should, 4th machine just not being used much clean glass in cab single arch. Ready to work!

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703

‘16 Halverson H140 Skidsteer (DEMO)

VALMET 840.2 FORWARDER Item ID: 9770

2005 model with 18000 frame hours, has new trunnion, & new rear bogie brakes installed last spring. Comes with 1 set of bear paws,1 set of ice chains, & 1 set of tracks.

SUPER

‘93 Barko 180B

Item ID: 14077 Timberpro TL 745C

Item ID: 8010 Contact: Austin CLEAN Ph: MACHINE! 4,600 401-6367 hours, Runs smooth!

Has a (888) x703

full

Item ID: JW-909632 rotation hot saw (A60 degree). Fire suppression cab, A/C & Heat. All hydraulics in good working order. Tilt cab machine (70% or better).

Contact: J Williams Hydraulic cylinders, Boom and saw head pins & bushings are good!

Ph: (888) 401-6367 x701Contact: JOE

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

Cat D5G with Winch Item ID: 107

2002 model with 7000 hours. Has log arch & winch! Everything in the undercarriage was just replaced besides the rails and one front idler.

‘95 John Deere C6 Contact: AUSTIN Tree Farmer Email: Austin@lumbermensco.com Item ID: Phone: 888-401-6367 EXT 13920 703 OR 931-797-8029

L O G G I N G

Timberking 458 Forwarder Item ID: 171

Tigercat T240B Item ID: 4266

2005 model with 17,750 frame hours. Had new engine 13428 Ln. 1000 // hours PO Box and new super grip Victory grapple installed ago.

Working daily

124 2006 model with 10,500 hours, has all new hoses, along Adams Center, NY 13606 with all repacked cylinders. In excellent condition.

Contact: AUSTIN Contact: AUSTIN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703

931-797-8029

931-797-8029

‘13 KMC 2500 Track Skidder

Contact: Austin Ph: (888) 401-6367 John Deere 648E x703

Item ID: 14078 1995 pin & Contact: Austin woods Ph: (888) 401-6367 x703

model in excellent condition, every bushing are new. Has not been in the capacity!.

Item worth ID 13421.

Sam done! x702 since having $20k of work

off onto a conveyor. This is a very

1996 John Deere 648G Sam x702 Item ID: 4894 Firewood Processor - This is

John Deere 1110E

‘83 John Deere Item ID: 14252 1400 original hours. 8 wheel, swiveling self leveling cab, 4850 clean straight blade, 360s heavy duty grapple, double extender 32' radial forestry tires, 1 set of Itemmakes ID:boom 14073 tracks, rated for 5 1/2 cords, 6 cylinder John Deere diesel Call for more pictures Contact: Austin

Comes with a winch, has new pins and bushings a Chomper 16 PDA in the grapple and main Model boom. Tires are size 28L

Ph: (888) 401-6367 x703 Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

1999 John Deere 648G

Item ID 13644.

ItemSam ID: x702 8548

FIREWOOD PROCESSORS 11000 frame hours with new engine installed last year.

Has New turbo as well.

2010 Shop Built Wood Processor AUSTIN - Contact: It has a 353 Detroit diesel, 40 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT30703 inch insert tooth circle saw, foot

931-797-8029 377  Issue 364

automatice Contact: AUSTIN

firewood processor

Email: Austin@lumbermensco.com Item ID: JW-986495 with John Deere power unit with Phone: 888-401-6367 EXT 703 OR 931-797-8029 Contact: J Williams low hours. Control panel includes Ph: (888) 401-6367 x701

tach, oil pressure, water temp and

2000 Tigercat 845

amp Item gauges. logs up to 16”.

ID:Cuts 4497

chain conveyer, 8 way splitter,This oncutter has One owner comes all saw 4689 originaland frame hours, with with New 20,000lb goose neck trailer.

13916. Austin x703

Best Value Portable Log

pump installed 300 hours ago. Good Uncercarraige. Cab Item manuals and receipts. Purchased has ID AC but no Heat.

new for $32,500. Item ID 13865.

Contact: AUSTIN Email: Austin@lumbermensco.com Splitter Sam x702 Phone: 888-401-6367 EXT 703 OR 931-797-8029

- Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

LOGGING EQUIPMENT BANDIT540D 1988 John Deere

1999 Bandit 1900 Tracked Disc Item ID: 727

Rebuilt motor 1000 hours ago, Under tight center section, noatslip 13HP Honda motor. Manual start Chipper - Cat Carriage

but electronic option is

transmission, good winch. Tires are 23.1 x 26 with chains available. all around. 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Has Log Lift. Uses 4-way wedge Contact: AUSTIN adjustable to single two way.

Email: Austin@lumbermensco.com Great Well maintained. Item ID 13294.

Phone: 888-401-6367 EXT 703 OR 931-797-8029

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Sam x702

2004 Bandit Beast Model 4680 -

2008 Barko 495 ML

3412 Caterpillar Diesel engine Item ID: 7648 with 850 HP. 5300 hrs. in log deck. Has a hydraulic grapple, 11000 frame hours, and comes with csi Mill 264 Delimber. homemade processor with a 10’ chain and kicker that all

it is a tight and dry machine. runs Owner off statesgood condition.

Just finished

10

Contact: AUSTIN Acre clearing job, ready to work! of a 4 cylinder Mercedes power Email: Austin@lumbermensco.com

Remote control.

Big931-797-8029 production unit. Has a 4’ chain saw that kicks Phone: 888-401-6367 EXT 703 OR

Lumbermens  since 1986

❘

BARKO

Contact: AUSTIN Email: Austin@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 703 OR 931-797-8029

well built processor. Item ID 13820.

‘05 Gehl CTL 70

Item ID: 6603

 List  seLL  exchange  buy  save

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

Volvo L50D

good. in good order. 22in Itemworking ID: 14263

kohing head. head works great.

2008 Volvo L50D and 5000 hours, bucket and forks, brand new quick connect, new starter, new battery, Item Sam x702cab heat/air, clean new acID that 13185. needs charged, enclosed

glass 50% tires, works real nice. Call for more pictures 1999 Barko 160D - new engine with Contact: MARK approximately 1500 hours. Hour Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 meter dont work. The last 2 owners

702-875-2703 have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

CAT 910C

Runs Great!.

Item 13740. Sam Item ID:ID 14264

x702 910 Cat 1978 transmission rebuilt, new clutch 1k hours

ago, dry, runs good, windows clean, forks, good woods machine, rife and kane tires off a combine tread is 5-6 inches deep, new battery. Call for more pictures

BELL

1990 Bell Super T - This Bell has MARK aContact: brandMark@lumbermensco.com new Duetz engine. Lever Email: Phone: 888-401-6367 EXTtranny 708 control, 33” bar, pump and

702-875-2703 ❘

 LumbermensCO.com

** CALENDAR**

2001 John Deere 435 Item ID: 7100

Loader is very tight and dry. It also comes with CTR

bucksaw.

NY STATE WOODSMEN'S FIELD DAYS Fri, 18AUSTIN August - Sun, 20 August Contact: Email: Austin@lumbermensco.com Boonville, New York Phone: 888-401-6367 EXT 703 OR 931-797-8029

www.starwebhosting.net/woodsmen/

1996 Timberjack 460D Item ID: 14276

The Tree that Started it All! Contact: MARK

Hot Springs, Arkansas

1999 model with 8200 Hours, UC is about 80%, has 36” www.arkloggers.com pads. All filters were just changed, and cylinders repacked.

Contact: AUSTIN 72ND ANNUAL GREAT LAKES Email: Austin@lumbermensco.com LOGGING & HEAVY EXPO Phone: 888-401-6367 EXTEQUIPMENT 703 OR 931-797-8029

Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT has 708 Since 1986, Lumbermens published 702-875-2703 a monthly circular

Thurs, 7 Sept - Sat, 9 Sept

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

Item ID: 5109 MID-ATLANTIC LOGGING & BIOMASS 2009 model with forestry frame hours, Fri, 15 Sept -package, Sat, has 166000 Sept with new John Deere installed engine 3 months ago. UC is

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co John Deere 548E

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Lexington, Kentucky Item ID: 706 http://www.kfia.org/ Model with propac delimber, good KentuckyWoodExpo.aspx

2004 Machine has been well maintained.

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

it includes two sets of Mcdonough pressure guides. Top Casting wheel

feet John a minute also has CLT XLT presses.

Deere 650K Item ID: 480 Item ID 13876. Austin x703 UC.

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

that go up and down, with airbags,

in ve1y good condition, Cuts 130

Contact: THEAUSTIN PAUL BUNYAN SHOW Email: Austin@lumbermensco.com Fri, 6 Oct EXT - Sun, 8 931-797-8029 Oct Phone: 888-401-6367 703 OR

Contact:DESIGN MARK DIRECTOR Email: Mark@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 708

702-875-2703

feed deck 20 foot out feed deck Contact: AUSTIN Email: Austin@lumbermensco.com with 44 inch wheels, andEXT all the Phone: 888-401-6367 703

931-797-8029 bells and whistles, its a production

is an extremely accurate machine

John Deere 200CLC

MARKETING DIRECTOR

2011 Model with around 8000 Hours, well maintained

and ready to work. has been rebuilt, it has a 24foot in

is supported on both sides. This

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

converted cable John skidder approx.

9500 hours completely Williams rebuilt motor less 300 hours ago new sleeves, pistons, (888) 401-6367 701new hybang bearings, rod bearings, heads ext. done, brand draulic pumpj@lumbermens.co around 300 hours ago Call for more pictures

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Selma, North Carolina around 75% www.midatlantic-logging-biomass­ Contact: AUSTIN expo.com/ Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Item ID: 14267

CATResaw 525C- Roughly Danckaert Band Item ID: 4091 10 hours on this machine since it

machine, with air strain conveyers

John Deere 650J XLT

PUBLISHER

BANDMILLS & HEADSAWS

** INFO LINK**

model withBand 4300 Hours, haswith forestry package, and S2013 &W 125 Mill recently had new tracks, sprockets, idlers, and rollers

installed.

Caterpillar generator - Low hours

on the mill,AUSTIN electronic computer Set Contact: Email: Austin@lumbermensco.com works,1 1/2" or 2" band,EXT 22ft.703 track Phone: 888-401-6367

931-797-8029 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36 CRD Metalworks .................... 25

• 83 HP Turbo Charged Kubota Carriage line it includes carriage M&F Gauge•.............................

28 48” Carbide Insert Circular Saw carriage with onboard log turners, Meadows Mill, . ................

33 Motion • Inc Vertical Saw –pac reduces drive, hyd for carriage, Menominee Sawrocking .....................

29 frame and stress sawyers cab, computer controls, cabinet with electronic drives for Metal Detector's Inc. .............. 30 • Powered Hourglass Infeed Rolls carriagewith knees, husk Midwest Sharpening ..............

26 • Triple Multi-Wedge 4, 6,including and 48" bottom saw and 36" top saw Morbark .....................................

9 splitting 8 or 10 way • Auto-Splitter with 3.8 second Multitek ...................................

12 cycle time13 Piper's Saw Shop ....................

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

B & B Mfg. ............................... 18 B. H. Payne .............................. 16 Baker ...................................... 5, 7 Bell's Machining ..................... 27 Brute Force Mfg. ..................... 31 Corley Mfg .............................. 32

STACKING RAC

www.BakerProducts.net Lignomat ................................. 24 WoodMizer ................................ l Built-Rite Mfg · 750 East Hill Road, Ludlow, VT 05149 · 800-757-2520 · info@built-rite.com 800.S48.6914 I S73.663.7711

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 21

L O G G I N G

SOUTHWESTTigercat FOREST PRODUCTS EXPO 845 Fri, 25 August Sat, 26 August Item ID: 8139

14,000 hours 3 brand new tires 1 at 40% big winch, motor redone 800 hours ago, new water pump 2 years ago, valves redone last week small oil and hydraulic drip very minor out of control valves, a few cylinoids replaced great working machine Call for more pictures

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

07 Prentice 950B

“Precision Under Pressure”

Phone 315.284.4126 Item ID: 5368 Fax 315.849.2045 3000 Original hours and has a new set of 30.5 Website Goodyear tires. www.empirehyd.com Email Contact: AUSTIN info@empirehyd.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Prentice 210E Item ID: 14222

‘16 Halverson H140 good tight machine turntable is tight cummings engine easy on fuel doesn’t burn any oil new water pump on it normal maintenance 2nd(DEMO) owner glass good new seat Skidsteer cover nice never ran a delimber hour meter says 5400

'01 Gyro Tract GT13 Item ID: 14116

true hoursID: are between 7000 and 7500 quick connect Item JW-909632 csi 4400 12’ table joystick controls delimber attachment Contact: J Williams Contact: Ph: (888)MARK 401-6367 x701

Comes with Miller Stump Grinder.

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

‘93 Barko 180B

Deere 160D ItemJohn ID: 14077 Item ID: 6965 Contact: Austin 2010 Model with less than 2000 Hoursx703 on it. Comes with Ph: (888) 401-6367 Ryan’s DS28 processing head and bucket. Good undercarriage and good machine.

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

96’ Hydro ax 611E Item ID: 4654

‘95 John Deere C6 Tree Farmer

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘13 KMC 2500544B Track John Deere Item ID: 14230 Skidder

L O G G I N G

01’ Timberjack 460D Item ID: 345

runs good, sometimes needs starting fluid to crank, steering cylinder packing, good tires good breaks, Item ID: needs 14078 good transmission, dry, tight, doesn’t burn oil, unsure Contact: Austin on hours one tire brand new the rest 60-70%

13428 Victory Ln. // PO Box 124 Contact: AUSTIN Adams Center, NY 13606 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Ph: (888) 401-6367 x703

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703 off onto a conveyor. This is a very

1990’s John Deere 590C buckets needs bushing brand new tracks needs muffler gravel pit John Deere 590c good machine no slack in table no slack in boom

‘05 Gehl CTL 70

Contact: MARK Email: Mark@lumbermensco.com Item ID: JW-986495 Phone: 888-401-6367 708 or 702-875-2703 Contact: JEXT Williams

Ph: (888) 401-6367 x701 Item ID: 14236

chain 8 way 2014 John Deere 843K conveyer, 34x26 tires 70-80% runs assplitter, should lowon hour, Item ID: 14073 JD 22B head 20,000lb goose neck trailer.

Item ID Contact: Austin Contact: MARK 13916. Austin x703 Ph: (888) 401-6367 x703Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703 Best Value Portable Log Splitter

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS CAT 515 Grapple Skidder

Brewco Saws - Two Brewco Saws Item ID: 14257

in excellent condition. Runs great.

around 7000 hours strong winch 50% rubItem IDEverything 13644. Sam ber 28's. worksx702 as it should. Woods ready, call for video!

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor Contact: MARK -Email: It has aMark@lumbermensco.com 353 Detroit diesel, 40 Phone: 888-401-6367 EXT 708 inch insert tooth circle saw, 30 foot

702-875-2703 377  Issue 364

Firewood Processor - This is a Chomper Model 16 PDA

- Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

amp gauges. Cuts logs up to 16”.

homemade processor with a 10’

approximately 1500 hours. Hour new for $32,500. Item ID 13865.

Contact: MARK Email: Mark@lumbermensco.com meter dont work. The last 2 owners Sam x702 888-401-6367 EXT 708 or 702-875-2703 only used it to load trucks or LOGGING EQUIPMENT Phone: have

BANDIT648L ‘15 John Deere

Item ID: 14237 1999 Bandit 1900 Tracked Disc

Sam x702

2004 Bandit Beast 595 Model 4680 ‘14 Barko Item ID: 14238 3412 Caterpillar Diesel engine

2014 Barko 595 ML Magnum+ CSI 5300 264 Delimber CSI 4400 with 850 HP. hrs. 18’ Mill in ground log deck. Has a hydraulic grapple, saw 1402 hours, plated lines, hyrdraulic legs, tight, dry, runs as should, ready to work,good on pits trailer, cat kodiak grapple off condition.

Just finished 10

Acre clearing job, ready to work! of a 4 cylinder Mercedes power Contact: MARK Email: Mark@lumbermensco.com control.

Bigorproduction unit. Has a 4’ chain saw that kicks Phone: Remote 888-401-6367 EXT 708 702-875-2703

Lumbermens  since 1986

❘

Item ID:head 14232 kohing head. works great.

hours a only 300 hours in the last year 65% tracks under sprockets 1999 Barko 160D - new engine with manuals and receipts. Purchased rollers good, everything works as it should. Call for more info

but electronic option is available.

50% or better. 475 hp Cummins Contact: MARK Diesel. 7500 Hours. One owner.

Has Log Lift. Uses 4-way wedge Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703 adjustable to single two way. Great Well maintained.

Item ID 13294.

Firewood Processor - This is a

good. in good working order. 22in ‘11 John Deere 753J

John Deere 753J ID Hot saw processor tracked feller buncher, reguItem 13185.

Sam x702 One owner and comes with all2011 lar maintenance, owners manuals as well as mainatance records 7441

runs as should ready to go, dual arch, good winch

Value! PA. Item ID 12062. Sam x702

Item ID: 52342 (excellent condition.). Item ID

1995 Barko 775 B Feller Buncher automatice firewood processor Contact: WALKER Email: Walker@lumbermensco.com - Pumps recently redone. 400 hrs with John Deere power unit with Phone: 888-401-6367 EXT 707 on injection pump. always started low hours. Control panel includes

2015 John Deere 648L 44” tires 2267 hours 85-90% dry, tight, lowathour, 13HP Honda motor. Manual start Chipper - Cat Under Carriage

chain and kicker that all runs

Contact: MARK BARKO Email: Mark@lumbermensco.com 1994 Barko 160B - ElectricEXT 708 Phone: 888-401-6367

702-875-2703 knuckleboom, 30' boom, 75hp

2011 model portable loader, has 8,631 hours on it.

13238. Chris x700 Woods ready.

tach, oil pressure, water temp and

‘14 John Deere 843K

condition. Easily produces high

Item ID: 14225

2006 CTR 450 delimber, good working condition. Selling only because using bucksaw instead Sam x702 capacity!.

Item ID 13421.

grapple, 5,000 original hours.

Knuckle Boom Loader

Sam x702

Item ID: 14233

with 1700 hours, in very good

CTR 450 Delimber

motor, Rotobec continuous well built processor. Item ID 13820. 2011 437D John Deere

‘90 John Deere 590C

‘83 John Deere 4850

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

 List  seLL  exchange  buy  save

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

‘14 Case CX210C Item ID: 14239 Runs Great!. Item ID 13740. Sam

2014 Case CX210C bought 2015 grinding head 150

x702 hours has hi-flo hydraulic thumb 36” inch bucket 1100 ripper tooth 99% tracks undercarriage 2 new rollers, very dry, back up camera heat/ac radio excellent machine

BELL

1990 Bell Super T - This Bell has MARK aContact: brandMark@lumbermensco.com new Duetz engine. Lever Email: Phone: 888-401-6367 EXTtranny 708 control, 33” bar, pump and

702-875-2703 ❘

 LumbermensCO.com

** CALENDAR** Timberjack 207 Item ID: 14144

Out of frame rebuilt engine, out of frame rebuilt transmission, rebuilt reverse box. Runs great, paper work NYdocumenting STATE WOODSMEN'S FIELD DAYS all work done.

Fri, 18 August - Sun, 20 August

Contact: MARK Boonville, New York Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703 www.starwebhosting.net/woodsmen/

Cat 525

Cat 525 3304The engine, tires 65%, 13929 Tree hours brand new Started hydraulic pump. that

Hot Springs, Arkansas 2nd owner around 8000 hours, call for more info www.arkloggers.com

it All! Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 Since 1986, Lumbermens has published 702-875-2703 a monthly circular

Contact: MARK 72ND ANNUAL GREAT LAKES Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 LOGGING & HEAVY EQUIPMENT EXPO

702-875-2703

Thurs, 7 Sept - Sat, 9 Sept

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Selma, North Carolina Contact: AUSTIN Email: Austin@lumbermensco.com www.midatlantic-logging-biomass­ Phone: 888-401-6367 EXT 703 expo.com/

John Williams 2004 CAT 525B (888) 401-6367 ext. 701 Item ID: 14204 j@lumbermens.co

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402 The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine

Item ID: 14187 http://www.kfia.org/

Sslack &W 125w/winch Band30.5 Mill with no leaks 32 tires 75% good working

KentuckyWoodExpo.aspx

Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

it includes two sets of Mcdonough

in ve1y good condition, 2432 Cuts 130 ‘07 Prentice Item ID: 14241 feet a minute also has CLT presses.

Contact: AUSTIN Email: Austin@lumbermensco.com THE888-401-6367 PAUL BUNYAN SHOW Phone: EXT 703

Contact: AUSTIN DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 703

that go up and down, with airbags,

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

'04 John Deere 700H Lexington, Kentucky

MARKETING DIRECTOR

has been rebuilt, it has a 24foot in Contact: MARK feed deck 20 foot out feed deck Email: Mark@lumbermensco.com Phone: 888-401-6367 708 with 44 inch wheels, andEXT all the

702-875-2703 bells and whistles, its a production machine, with air strain conveyers

'93 John Deere&548E MID-ATLANTIC LOGGING BIOMASS Item ID: 14184 Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

BANDMILLS & HEADSAWS

dry tight everything on sprockets roller idlers chains all tracks and undercarriage is 1 year old and 90% w/winch, winchBand has reverse 6-way- Roughly blade screens Danckaert Resaw and ropes open cab taken good care of 4900.7 hours.

10 hours on this machine since it

2007 2432 prentice grapple skidder- 14000 hours motor Item IDhours 13876.

Austin x703 has 4200 crate motor new trans new back glass

real tight 1200 hours on center pins cradle has just little

machine Caterpillar generator - Low hours Contact: MARK on the mill, electronic computer Set Email: Mark@lumbermensco.com Phone:1/2" 888-401-6367 works,1 or 2" band,EXT 22ft.708 track

702-875-2703 Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434.

** INFO LINK**

Sam x702

Innovative

CARRIAGES & DRIVES

2010 Cardinal HD Carriage

Carriages (Sawmill) - Cardinal Clean-Burn Design

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7 Menominee Saw ..................... 29 Manufacturing a full line of biomass fired Bell's Machining ..................... 27 Metal Detector's Inc. .............. 30 combustion systems backed with fifty years of innovative clean-burn design. Diverse every Brute Force Mfg. .....................

31 inMidwest Sharpening.............. 26 way with multi-fuel blending capability. Hurst Buckstokers Equipment ........

36 Mor bark ..................................... 9 utilize (AIM) hundreds of common and abundant solid biomass fuels.

Corley Mfg .............................. 32 Multitek ................................... 12 Large or small scale, project Piper's CRD Metalworks ....................

25 with management is eased the Saw Shop.................... 13 impressively short installation time CW Mill-ArmorHog .............. 17 Rotochopper............................ 40 required with prefabricated CW Mill-Hogzilla ...................

15 Row Electric ............................ 20 modular components.

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3 Rotary Dryers Hurst Boiler ............................. 14 Sand Dryers Grain Iron Dryers Bull ................................... 21 Lumber Kilns Kilgore Saw ............................. 22 Cement Kilns Brick Kilns................................. 24 Lignomat

The Paul Bunyan Show ......... 39

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Carriage line it includes carriage

with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including 48" bottom saw and 36" top saw

STACKING RAC

Thomas Industrial Controls..... 10 Union Grove Saw & Knife.. 2, 37 Universal Refiner ................... 23 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

50

www.BakerProducts.net YEARS 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 23

L O G G I N G

'03FOREST 670 Hydro-Ax SOUTHWEST PRODUCTS EXPO Item-ID: 14138 Fri, 25 August Sat, 26 August

Item ID: 14155

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at '06 John Deere 700J www.LumberMB\ISmagazine.com Item ID: 14194

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

'97 Hydro AX-411 EX Bar Saw Head

‘16 Halverson H140 Skidsteer (DEMO) 04’ TimberKing 540DS

Item ID: 98754

Heat works. Air needs charging.

Tires inc., great shape tires chains to go with it bear claws.

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

2011 CAT 525C

Item ID: JW-909632 Item ID: 14205 Contact: J Williams Contact: Ph: (888)AUSTIN 401-6367 x701

Item ID: 14203

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘93 Barko 180B

Item ID: 14077 Contact: Austin Prentice Ph: 98’ (888) 401-6367410E x703 Item ID: 14206

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘02 Prentice 490 Item ID: 14047

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

L O G G I N G

‘13 KMC 2500 Track Skidder

‘89 Timberjack 380A

Item ID:ID: 14078 Item 14039 Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703

51813428 CAT Grapple Victory Ln.Skidder // PO Box 124

Item ID: 14036NY 13606 Adams Center, Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

off onto a conveyor. This is a very

well built processor. Item ID 13820.

John Deere Cab

Sam x702 Item ID: 6679

‘05 Gehl CTL 70

Firewood - This AC, FD 55 Cutting Processor Head, 70% TiresisVery Good Condition, 3500 Hours. a Chomper Model 16 PDA firewood processor Contact:automatice SAM

Email: Sam@lumbermensco.com Item ID: JW-986495 with John Deere power unit with Phone: 888-401-6367 EXT 702 Contact: J Williams low hours. Control panel includes Ph: (888) 401-6367 x701

‘95 John Deere C6 Tree Farmer Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Mid 90’s Husky Brute 335XL

ID:13421.

14088Sam x702 capacity!.Item Item ID

BARKO Contact: AUSTIN Email: Austin@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 703 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

Caterpillar

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 with 1700 hours, in very good

lbs, HP,and New Firestone chain conveyer, 8 way splitter,17,000 on One100 owner comes with all23 x 126, Power Shift New Hyd Pump, New 20,000lb goose neck trailer. Item ID Shaft, manuals receipts.

Purchased Winch Newand Hyd Park Brake.

13916. Austin x703 for $32,500. Item ID 13865.

Contact:new SAM Email: Sam@lumbermensco.com Best Value Portable Log Splitter Sam x702 Phone: 888-401-6367 EXT 702 - Small manufacturer in PA has LOGGING EQUIPMENT

on injection pump. always started Item ID: 2476 good. in good working order. 22in Product no. 4194, Cab with cold AC, kohing head. head SH56 Bunching Head,works 28L-26great.

Tires At 60%, Center Tight, Runs Great, Machine Item ID 13185. Sam x702 Has New Injectors, New Fan Motors, 1999 BarkoOn 160D - new engine And Clutch AC, 11,111 Hours. with approximately Contact: SAM1500 hours. Hour Email:dont Sam@lumbermensco.com meter work. The last 2 owners Phone: 888-401-6367 EXT 702 have only used it to load trucks or

quality chips with patented ‘Cone’

Handles logs up to 32”. Uses

delimber, grapple has been rebuilt.

‘83 John Deere 4850

‘00ID: Timberjack 1110 Item 14073 Item ID: 14033 Contact: Austin Ph: (888) 401-6367 x703 Contact: AUSTIN

condition. Easily produces high

drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

Johncondition.

Deere Runs 540B in excellent great.

Item ID: 0908 Item ID 13644. Sam x702 All FIREWOOD Refurbished!PROCESSORS 4K Original Hours!

2010 Shop Built Wood Processor SAM - Contact: It has a 353 Detroit diesel, 40 Email: Sam@lumbermensco.com inch insert tooth circle saw, 30 foot Phone: 888-401-6367 EXT 702 377  Issue 364

tach, oil Deere pressure, 540D water temp and John Item ID: 5613 amp gauges.

Cuts logs up to 16”.

made the best valued log splitter.

John

BANDIT Deere 437D Log Loader Item ID: 8834 1999 Bandit 1900 Tracked Disc

13HP Honda motor. Manual start - Cat Under Carriage Product Chipper No. 4204, Extra Clean, 10K at Hours, Stock Photo Delimber but electronic option is available.

50% or better. 475 hp Cummins Contact:Diesel.

SAM 7500 Hours. One owner.

Has Log Lift. Uses 4-way wedge Email: Sam@lumbermensco.com adjustable to single two way. Great Well maintained. Item ID 13294.

Phone: 888-401-6367 EXT 702 Value! PA. Item ID 12062. Sam x702 Sam x702 Firewood Processor - This is a

homemade processor with a 10’‘14 log deck. Has a hydraulic grapple,

2004 Bandit Beast Model 4680 -

3412 Caterpillar Diesel Loader engine Komatsu WA200 ID:5300 14010 with Item 850 HP. hrs. Mill in

Contact:good AUSTIN chain and kicker that all runs off condition. Just finished 10 Email: Austin@lumbermensco.com Acre clearing job, ready to work! of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 Remote control. Big production unit. Has a 4’ chain saw that kicks

Lumbermens  since 1986

❘

 List  seLL  exchange  buy  save

as a backup as needed. Has a CTR Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

96’ John BELL Deere 643D

Item ID: 14207 1990 Bell Super T - This Bell has Contact: AUSTIN a brand new Duetz engine. Lever Email: Austin@lumbermensco.com control, bar, pump and Phone:33” 888-401-6367 EXTtranny 703 ❘

 LumbermensCO.com

** CALENDAR** Case 85XT Skid Steer Item ID: 14149

Open Cab, Top Fork And Bucket Attachments.

95% Front Tires 60-70% Rear Tires.

NY STATE WOODSMEN'S FIELD DAYS Contact: MARK Fri, 18 August - Sun, 20 August Email: Mark@lumbermensco.com Boonville, New York Phone: 888-401-6367 EXT 708 702-875-2703 www.starwebhosting.net/woodsmen/

FORESTBoom PRODUCTS EXPO '96 410D SOUTHWEST Prentice Knuckle

The Tree Excellent Condition. One owner machine comes with a bucket that and forksStarted currently has around 3000 hours. it All!

Hot Springs, Arkansas Turntable is real loose, needs bearings and hydraulic is seized up, 6 cylinder John Deere diesel. parts or fixer. Parts in good shape! www.arkloggers.com

Item ID: 14145

Fri, ID: 25 14151 August Item

Contact: 72NDMARK ANNUAL GREAT LAKES Email: Mark@lumbermensco.com LOGGING & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 708 OR 702-875-2703

Contact: MARK Email: Mark@lumbermensco.com Phone: EXT 708 Since 888-401-6367 1986, Lumbermens

702-875-2703

has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

'15 CAT 521B Reduced Price MID-ATLANTIC LOGGING & BIOMASS Item-ID: 14150 Fri, 15 Sept Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat,D6C 16 Sept '72 CAT

Lexington, Kentucky Item ID: 14152 http://www.kfia.org/ Good winch with arch, straight blade, around 10k hours KentuckyWoodExpo.aspx turns fine undercarriage 50-60% good rollers,

(888) 401-6367 ext. 701 Item ID: 14208 j@lumbermens.co

cab all screened, tilt blade complete logging setup

Contact: AUSTIN DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 703

Contact: THEMARK PAUL BUNYAN SHOW Email: Mark@lumbermensco.com Phone: 888-401-6367 708 OR Fri, 6 Oct EXT - Sun, 8 702-875-2703 Oct

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Less than 300 hours of use! Carolina Brand new. Tracks at Selma, North 99% excellent track cutter. www.midatlantic-logging-biomass­ Contact: MARK expo.com/ Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703

MARKETING DIRECTOR International TD15 John Williams Bull Dozer

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

- Sat, 26 August

** INFO LINK**

'90 Valmet 544H

BANDMILLS & 14146 HEADSAWS Item ID: Danckaert Resaw - Roughly motor runs Band excellent, comes with 40%

chains, used just a couple months ago to

10 thishours, machine it cut hours trees. on 10-12k front since tires 60-70%

rear 90% turbo is lagging. Harvesting head

has been up. rebuilt, it has 24foot in is messed A couple leaks anot too serious feed deckMARK 20 foot out feed deck Contact: Email: Mark@lumbermensco.com

with 44888-401-6367 inch wheels, and Phone: EXT 708all the

702-875-2703

bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough

pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine

Danzco Delimber inPT20H ve1y good condition, Cuts 130 Item ID: 14134 feet a minute also has CLT presses.

Excellent condition, motorx703 rebuilt about Item ID 13876.

Austin 300 hours ago less than 2700 original Shours & W 125 Band Mill with Caterpillar generator - Low hours Contact: MARK on the mill, electronic computer Set Email: Mark@lumbermensco.com Phone:1/2" 888-401-6367 works,1 or 2" band,EXT 22ft.708 track

702-875-2703 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

L O G G I N G

'13 Komatsu WA200 PZ Wheel Loader

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 25

“Precision Under Pressure”

Item ID: 0998

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

One Owner, With Less Than 4K Hours. Excellent Undercarriage, Joystick Controls. Everything Working On It. Best Bell For The Price.

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘16 Halverson H140 '96 CAT 515 Log Skidder

John Deere 753J

Item ID: 7534

Skidsteer (DEMO)

Item ID: 14258

REDUCED PRICE! Single Arch Glass Cab, 28L X 26 Item ID: JW-909632 Tires 50/40%, New Bear Paws On Front, Ice Chains Rear, Esco 84’ Grapple, New Cutting Edge On Blade, Contact: J Williams All Cylinders Just Rebuilt, 12,800 Hrs.

2013 John Deere 753J with Quadco 360 hotsaw head 3,215 hours. Everything runs and works as it should

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

Ph: (888) 401-6367 x701

Contact: SAM • Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: ‘80 (888) 401-6367 John Deerex703 550 Item ID: 14037

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

'07 John Deere 848H Grapple Skidder Item ID: 6566

Product No. 1876, 11,066 Frame Hours, New Engine At 8,800 Hours, Dual Arch Winch, Chains On All Four Tires, Working Daily In Woods.

‘95 John Deere C6 Tree Farmer

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

L O G G I N G

‘13 KMC 2500 Track Skidder

‘14 B66TD Rotochopper

Item ID: ID: 14078 Item 13838 Contact: Austin Contact:Ph: SAM (888) 401-6367 x703

12’ JohnVictory Deere 437D 13428 Ln. // PO Box 124

Item ID: 14209 Adams Center, NY 13606 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

off onto a conveyor. This is a very

Contact: SAM BARKO Email: Sam@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 702 knuckleboom, 30' boom, 75hp

SamItem x702 ID: 7698

grapple, 5,000 original hours.

Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

well built processor.

Item ID 13820.

'94 CAT 518C Cable Skidder Firewood - This Product No. 1707, 3304 CATProcessor Engine 1-1/2 Yearsis Old, New Oil Cooler, Rebuilt Radiator, New Injector Pump, New a Chomper Model 16 PDA Hydraulic Pump, New Main Lines, New Arch, New Blade Plate, Good Air Brakes. automatice firewood processor

‘05 Gehl CTL 70

‘83 John Deere 4850

10’ John Deere 648H

Item ID: 14073 Item ID: 14210 Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 with 1700 hours, in very good condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws Franklin 2005 Q70 Item ID: 5579 in excellent condition. Runs great.

Item 13644.New SamRubber, x702 Heat/ LowID Hours!

ACFIREWOOD Takes No Oil. Great Running PROCESSORS Skidder.

2010 Shop Built Wood Processor

SAM - Contact: It has a 353 Detroit diesel, 40 Email: Sam@lumbermensco.com inch insert tooth circle saw, 30 foot Phone: 888-401-6367 EXT 702 377  Issue 364

Item ID: JW-986495 Contact: SAMwith • Email: JohnSam@lumbermensco.com Deere power unit with EXT 702 Contact: J Williams Phone: 888-401-6367 low hours. Control panel includes Ph: (888) 401-6367 x701 tach,980C oil pressure, water temp and '80 CAT Loader amp gauges. logs up to 16”.

Item ID:Cuts 14133

chain conveyer, 8 way splitter,All onmaintenance Onerecords owner and comes with tight machine 1980 980Call cat loader forks and a bucket tires 60-70% spare parts included.

20,000lb goose neck trailer. Item ID

manuals and receipts. Purchased

Contact: MARK new for $32,500. Item ID 13865.

Email: Mark@lumbermensco.com Phone: 888-401-6367 Best Value Portable Log Splitter Sam x702 EXT 708

702-875-2703

13916. Austin x703

- Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

LOGGING EQUIPMENT BANDIT '92 CAT 518

Item ID: 14198 1999 Bandit 1900 Tracked Disc

1992 CAT 518 6000 original frame hours! Carriage Rebuilt motor 13HP Honda motor. Manual start Chipper - Cat Under atand transmission with less than 1000 hours, excellent winch, great machine.

Callor forbetter. video 475 hp Cummins but electronic option is available.

50%

Diesel.

7500 Hours. One owner.

Has Log Lift. Uses 4-way wedge Contact: MARK Email: Mark@lumbermensco.com adjustable to single two way. Great Well maintained.

Item ID 13294.

Phone: 888-401-6367 EXT 708 or 702-875-2703 Value! PA. Item ID 12062. Sam x702 Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple,

2004 Bandit Beast Model 4680 3412 engine ‘97Caterpillar TimbcoDiesel 425D ID:5300 13950 with Item 850 HP. hrs. Mill in

chain and kicker that all runs off condition. Just finished 10 Contact:good AUSTIN Email: Austin@lumbermensco.com Acre clearing job, ready to work! of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 Remote control. Big production unit. Has a 4’ chain saw that kicks

Lumbermens  since 1986

❘

‘05 Timberjack 608B

ID:13421.

13898Sam x702 capacity!.Item Item ID

 List  seLL  exchange  buy  save

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185.

Sam x702 ‘06 CAT 517 Item ID: 13869 1999 Barko 160D - new engine with

Contact: SAM1500 hours. Hour approximately Email: Sam@lumbermensco.com meter dont work. The last 2 owners Phone: 888-401-6367 EXT 702 have only used it to load trucks or as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

John 648D Grapple Skidder

Runs Great!.

Item 13740. Sam Item ID:ID 14265

3 tires at 65% 1 at 25% runs great, good engine, new x702

pump on front, new valve bank, cylinders redone, big winch, grapple is tight, center pins are okay, will need to be replaced down the road it's a 4th spare machine.

Call forBell more pictures 1990 Super T - This Bell has

BELL

MARK aContact: brand new Duetz engine. Lever Email: Mark@lumbermensco.com

Phone: 888-401-6367 EXT 708 control, 33” bar, pump and tranny

702-875-2703

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

93’ Prentice 210 Item ID: 14216

AUSTIN NYContact: STATE WOODSMEN'S FIELD DAYS Email: Austin@lumbermensco.com Fri, 18 August - Sun, 20 August Phone: 888-401-6367 EXT 703

Boonville, New York www.starwebhosting.net/woodsmen/

DanckaertItem BandID: Resaw - Roughly 14170 10 hours on this machine since it 85% Undercarriage. has been rebuilt, it has a 24foot in Contact: AUSTIN feed deck 20 foot out feed deck Email: Austin@lumbermensco.com with 44 inch wheels, andEXT all the Phone: 888-401-6367 703 bells andJOHN whistles, its a production 84/85 DEERE 440B/C

Item ID:Arkansas 14217 Hot Springs, www.arkloggers.com Contact: AUSTIN

Item 14211 thatID: Started

published a monthly circular 2010 JOHN DEERE 1110E reachingFORWARDER sawmills, loggers, pallet makers, and 8 Super Clean recyclers machine.

Wheeled.

Only 5800 plants hours. industrial woodworking One owner and well maintained. worldwide.

2004 Timbco 445EXL

Email: Austin@lumbermensco.com 72ND ANNUAL GREAT LAKES Phone: 888-401-6367 EXT 703

LOGGING & HEAVY EQUIPMENT EXPO Sat, 9DEERE Sept 2012 JOHN DEERE 548GIII Thurs, 7 Sept 2014-JOHN

** CALENDAR**

FOR CLASSIFIEDS

Single arch with winch, blade Escanaba, 160GMichigan EXCAVATOR extensions, 1 new 28L and 3 @ Low hour excavator with only 50%. This is still a new machine 1500 hours. Still a new machine.

07’ Tigercat 724E MID-ATLANTIC LOGGING &Sam BIOMASS STATE WOODSMEN'S FIELD DAYS with only 3600 hours. NY Item IDID: 13841. x702 Item 14218 Fri,Fri, 18 August Sun, 20 August Hard to find them with low Item ID 13780. Sam x702 15 Sept - Sat, 16 Sept Boonville, New DEERE York PUBLISHER 2014 JOHN 643K hours like this!

Contact: AUSTIN Selma, North Carolina www.starwebhosting.net/woodsmen/ 2012/13 JOHN DEERE There’s not much to say about Item Woods ID 12947.

Sam x702 Publishing Email: Austin@lumbermensco.com www.midatlantic-logging-biomass­ 200D EXCAVATOR this feller buncher. It’s still brand MID-ATLANTIC SOUTHWEST FOREST PRODUCTS EXPO Phone: 888-401-6367 EXT box 703 with ADVERTISING SALES This is still a like new 2010 JOHN DEERE 703J new expo.com/ out of the only LOGGING & BIOMASS EXPO excavator Fri, 25 August Sat, 26 August Morris Woods with only 3000 hours. Comes HARVESTER 1452 hours. Has a 2000 hour The Tree Hot Springs, 9622 (888) Hours.

One Owner warranty.

It Arkansas comes mounted on 401-6367 ext. 704 Ma- with a stationary rocklandKENTUCKY WOOD EXPO that Started www.arkloggers.com thumb that can be adjusted chine.

Good undercarriage.

Re30.5 tires at 95%. Comes with a morris@lumbermens.co it All! Well main- manually. Great buy on this Fri, 15 W Sept Sat, 16Loader Sept Case 11 -Wheel cent boom update. tower head.

72ND22” ANNUAL GREAT LAKES MARKETING DIRECTOR Deere.

Tinted windows to help tained.

Runs very well.

Will Item ID 13864.

Sam Lexington, Kentucky Item ID: 14178 Since 1986, Lumbermens has LOGGING & HEAVY EQUIPMENTx702 EXPO keep the sun and heat out. include service trailer.circular 12’ John Deere 843K John Williams published a monthly http://www.kfia.org/ Thurs, 7 Sept - Sat, 9 Sept new motor around 200 hours, rebuilt transmission Item ID 13856.

Sam x702 Item ID 13419.

Sam x702 2015 JOHN DEERE 748L reaching sawmills, loggers, Item ID: 14212 (888) 401-6367 ext. 701 Escanaba, around 500 hours, withMichigan bucket and forks, quick KentuckyWoodExpo.aspx pallet makers, recyclers and This is still redone a newlast skidder attach setup, all cylinders summer,with fully j@lumbermens.co industrial woodworking plants only 1480 hours.

Owned by a 2011 JD 748H GRAPPLE 2013 JOHN DEERE 437D Contact: AUSTIN enclosed cab MID-ATLANTIC LOGGING & BIOMASS worldwide.SKIDDER This loader is still like brand new. construction company that is no DESIGN DIRECTOR THE PAUL BUNYAN Email: Austin@lumbermensco.com Fri,MARK 15 Sept - Sat, 16SHOW Sept It has been well taken care ofContact: withMark@lumbermensco.com longer needed. Dual arch, winch, 4600 GoodEXT running PUBLISHER Donna Heninger Email: Phone:hours.

888-401-6367 703 Selma, North Carolina Fri, 6 Oct -controls, Sun, 8 Oct Publishing only 2932 hours. CSI delimber, joystick turn around skidder. Woods 30.5 tires at 60% with Phone: 888-401-6367 EXT 708 OR 702-875-2703 www.midatlantic-logging-biomass­ MID-ATLANTIC Cambridge, Ohio EQUIPMENT REPS Kodiak, Series 3 hydraulic landing seat, wide blade dualingADVERTISING rings. Dual arch grapple.

SALES expo.com/ and HD axles.

LOGGING & BIOMASS EXPO gear. You will not find another www.ohioforest.org Was bought new in Jan and still Heat/AC. Morris Well maintained.

Woods Sam Wall (888) 401-6367 ext.

704 loader this clean. has factory warranty Item ID401-6367 13176. Sam KENTUCKY WOOD EXPO and an (888) ext. x702 702 morris@lumbermens.co Item ID 13822. Sam x702 Fri, extended can still be 15 Sept - warranty Sat, 16 Sept sam@lumbermens.co 2012 JD 544K W/LOG bought for Kentucky this skidder. Save a MARKETING DIRECTOR Lexington, 2014 JD 753J FELLER BUNCHER lot of money on this slightly used GRAPPLE John Williams Austin Woods http://www.kfia.org/ The Go Fast Firewood Wrapper produces better firewood (888) 401-6367 ext. 701 Super(888) Clean Machine!

5870 skidder over a brand new one.

NEW! KentuckyWoodExpo.aspx 401-6367 ext.

703 bundles forcab less.

The Wrapper is builtItem with j@lumbermens.co ID 13933. Sam x702 hours; Enclosed with heatFW-16 Treat Firewood as NEW! Only 381 hours. austin@lumbermens.co andtrue A/C; Ride control; Rockland Standardduty warranty gear reduction and heavy frames,expired, outlasting theBUNYAN SHOW DESIGN DIRECTOR THE PAUL Donna Heninger JOHN logcompetition. grapple; Tires at Simple, 80%. butand has reliable.

Extended Warranty on Fri, 62015 MAILING ADDRESS Oct Sun, DEERE 8 Oct 748L safe, Item EQUIPMENT IDP.O. 13534.

Sam x702 This skidder is still smells 28 new Major to 2017 18 or M&F B & BComponents Mfg. ...............................

Gauge .............................

Cambridge, Ohio REPS Box 1916 with only 1000 hours of use.

3000 hours. Totally loaded with www.ohioforest.org Sam Columbia, TNWall 38402-1916 2012 JD 401-6367 848H DUAL Mounted Mill, on 30.5 32 tires 33 with extras.

Has.............................. counterweight/ (888) ext. ARCH 702 B. H. Payne 16 Meadows Inc.X................

(888) 401-6367 SKIDDER a new set of tire chains. Dual boards. Includes the JD — sam@lumbermens.co THAT'S THE GOFAST running WAY Saw .....................

29 Baker 7 Menominee Only 4200 hours. arch, winch, joystick controls, 22” Hot......................................

Saw with 40 degree 5, tilt.

Woods Factory ADAustin SUBMISSIONS warranty until 5000 703 hours. turnaround seat, wide blade and 36” wide flotation pads. Simply (888) 401-6367 May be sentext. to­ Detector's . ..............

30 a Bell's Machining .....................

27 Metal Greataustin@lumbermens.co running condition. 35.5 HD axles.

SaveInc on this over perfect condition.

New price tires morris@lumbermens.co atMAILING 60%. Tight and Dry. brand new skidder because this is $445,000.

Save $40,000 for ADDRESS Brute Force Mfg 31 Midwest Sharpening .............. 26 Great Value. is stillGauge new. only hours of. ..................... use!

B &380 B Mfg . ...............................

18 M&F ............................. 28 P.O. Box 1916 POSTMASTER Item ID 13482.

Sam x702 Item ID 13935. Sam x702 Item ID 13574. Sam x702 Columbia, TN 38402-1916

This skidder came in a box to machine, with air strain conveyers

Lavaco Power Co in Colorado Call 888.401.MENS and go is up a very low hour skidder that and down, with airbags, Seeonly pictures, prices, and It with 5000 actual hours. it includes two sets of Mcdonough Location ofaall equipment at shows to be B model, but have to orderguides. parts for C. It comes www.LumberMB\ISmagazine.com pressure TopaCasting wheel with the original tires, 18.4 at is supported on both sides.

This 25% with chains on all 4 tires.

BANDMILLS & HEADSAWS New clutch, center is Roughly tight and is an extremely Danckaert Bandaccurate Resaw - machine everything works. This is a very 10 ve1y hours on this machine since it in good condition, Cuts 130 clean skidder. hasItem been ID rebuilt, it has a 24foot 13908.

Sam x702in

feet a minute also has CLT presses.

feed deck 20 foot out feed deck

John Deere 648G

SAW FB ItemJD ID643D 13876.

AustinHEAD x703 with 44 inch wheels, and all the

Decent machine.

Estimated Item ID: its 14179 bells whistles, a production S & Wand 125 Band Mill with 1993 model.

Serial number Good winch, brand batteries, pulled machine, with airnew strain conveyers available for Caterpillar generator - for Low hours logs last weekend.

Callverification. more info that go up and withengine. airbags, Recent JD down, recon on the mill, electronic computer Set Contact: MARK Tires at 60%.

Saw it includes two sets Cameco of Mcdonough Email: Mark@lumbermensco.com Head.

Needs new teeth.

AC pressure guides.

Top Casting works,1 1/2" or 2" band, 22ft.wheel track Phone: 888-401-6367 EXT 708 works.

Running today. Priced supported 702-875-2703 is on both sides. This Cat 3406 140KW Genset, 12,400 to move. is an extremely accurate machine Item ID 12845. Sam x702

FW-16 Firewood Wrapper

hours run. ItemCuts ID 13434. in ve1yready goodto condition, 130

Standard features:

JOHN DEERE 440C feet ax702 minute also has CLT presses.

Sam 1/3 HP 120V Motor

It has rebuilt engine Item ID a 13876.

Austin x703 about

** INFO LINK**

CARRIAGES & DRIVES

a thousand Fork hours Pockets ago, and it is working Many videos 2010 Cardinaldaily.

HD Carriage HD Gear Box Caterpillar generator - Low hours available of it working, and Carriages (Sawmill) Cardinal on the mill, electronic computer Set can be sent upon- request.

Item ID 13887.

Austin x703 works,1 1/2" 2" band, 22ft. track Carriage line itorincludes carriage

S & W 125 Band Mill with

Cat 3406 140KW Genset, 12,400

with onboard turners, carriage JOHN log DEERE 540B hours ready to run. Item ID 13434.

Production and Profit Without Compromise — ­

This is a low hour 540B with for carriage, only 8000 hours. Transmission’s & DRIVES good,CARRIAGES rebuilt winch is good sawyers cab, computer controls, and the center 2010 Cardinal HDsection Carriageis tight. cabinet electronic drives Comeswith mounted floats.for This Carriages (Sawmill)on - Cardinal little skidder should walk on top carriage husk including Carriage knees, line it includes carriage of the water. with onboard log turners, carriage 48" Item bottom and 36" top saw IDsaw 13867.

Sam x702

drive,x702 hyd pac Sam

** INFO LINK**

Send (888) address changes to: 401-6367 Lumberman's Exchange AD SUBMISSIONS P.O.beBox 1916 May sent to­ Columbia, TN 38402 morris@lumbermens.co

POSTMASTER TheSend Lumberman's isto: addressExchange changes Lumberman's published monthly byExchange Woods 1916 Publishing,P.O. P.O. Box Box 1916, Columbia, TN 38402 Columbia, TN 38402. All rights reserved.

All editorial/ advertorial The Lumberman's Exchange is published monthly byat Woods submissions are used the Publishing, P.O. Box 1916, discretion of the publisher and may Columbia, TN 38402. All rights be edited All for purposes clarity reserved. editorial/ of advertorial submissions are usedall at efforts the and space. Although have discretion publisher andof may been madeoftothe ensure accuracy be edited for purposes of clarity content submitted by advertisers and space. Although all efforts have been made tothe ensure accuracy of and writers, Lumberman's content submitted by advertisers Exchange, its principles and and writers, the Lumberman's associates, its areprinciples not held liable Exchange, and for errors or omissions.

Reproduction, associates, are not held liable for errors or omissions.

Reproduction, in whole or part, is prohibited with­ in whole or part, is prohibited with­ out written consent. out written consent. ©2017 Woods Woods Publishing Publishing ©2017

1-800-854-7439

Meadows Mill, Inc . ................ 33 Morbark .....................................

9 WWW.GOFASTMFG.COM Menominee Saw ..................... 29

B. H. Payne ..............................

Buck Equipment (AIM) ........ 16 36 Baker ...................................... 5, 7

Corley Mfg .............................. 32

drive, hyd pac for carriage,

STACKING RAC STACKING

sawyers cab, computer controls,

Multitek ................................... 12

Bell's Machining ..................... 27

Metal Detector's Inc . .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

CW Mill-ArmorHog ..............

Buck Equipment (AIM) ........ 17 36

Rotochopper ............................ 40 Mor bark .....................................

9

CRD Metalworks .................... 25

Corley Mfg ..............................

32 CW Mill-Hogzilla ................... 15

Piper's Saw Shop.................... 13

Multitek ...................................

Row Electric ............................ 12 20

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

Empire Hydraulics ...................158 CW Mill-Hogzilla ...................

SelectElectric Sawmill ......................... 20 19 Row ............................

Dyna ........................

Great Products Lakes Mfg . .................... 35 34

Sawmill Exchange .................. 11 Smith Sawmill ...........................

4

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Dyna Products ........................ 35

Hahn Machinery ...................... 3 Hurst Machinery Boiler .............................

14 Hahn ......................

3

Sawmill Exchange .................. 11

RAC

The Paul Bunyan Show ......... 39

Thomas Controls ..... 10 The PaulIndustrial Bunyan Show .........

39

Hurst Boiler ............................. 14 Iron Bull ...................................

21

Thomas Industrial Controls Union Grove Saw & Knife.......

2, 10 37

Iron Bull ................................... 21

Kilgore Saw ............................. 22

Union Grove Saw & Knife .. 2, 37

Kilgore Saw ............................. 22

Lignomat ................................. ................................. 24 24 Lignomat

Uni versal Refiner ................... 23

WoodMizer ................................ ................................ ll WoodMizer

❘ FORESTRY EQUIPMENT FOR SALE USED FORESTRY FORESTRY EQUIPMENT FOR SALE - USED SALE ❘

48" bottom saw and 36" top saw

Universal Refiner ................... 23

 SELL YOUR EQUIPMENT TODAY l§

 SELL YOUR EQUIPMENT TODAY TODAY ❘❘ l§

 24/7 SUPPORT 0

 24/7 SUPPORT 0 SUPPORT

www.BakerProducts.net www.BakerProducts.net 800.S48.6914 II S73.663.7711 S73.663.7711 800.S48.6914  (888) 401-MENS ❘ L!  (888) 401-MENS L! 401-MENS

❘

NO. 13

NO. 27

L O G G I N G

16’The CATTree 545D it All! Contact: AUSTIN Email: Austin@lumbermensco.com Since 1986, Lumbermens Phone: 888-401-6367 EXT has 703

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 2011 25 August Sat, 26 August John- Deere 648H

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘97 Timberjack 240D Item ID: 13917

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

CAT 525 Cable Skidder

‘16 Halverson H140 ‘93 John Deere 548E Skidsteer (DEMO) Item ID: 14083

Item ID: 14266

1997 CAT 525 9300 20% real tight center pins, dry no leaks, good shape, motor redone less than 1000 hours ago, transmission good, new cable, needs tires. Call for more pictures

Item ID: JW-909632

Contact:Contact: AUSTIN J Williams Email: Austin@lumbermensco.com Ph: (888) 401-6367 x701 Phone: 888-401-6367 EXT 703

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367845C x703 ‘11 Tigercat Item ID: 13927

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘94 Caterpillar 320 Item ID: 13936

L O G G I N G

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘13 KMC 2500 Track Skidder 2012 Cat D6K XL

Item ID: ID: 14078 Item 14169 Contact: Austin Contact:Ph: AUSTIN (888) 401-6367 x703

‘11 Tigercat 620D 13428 Victory Ln. // PO Box 124 Item ID: 13929 Adams Center, NY 13606 Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam611 x702Ex-Hydro Ax ‘98

Firewood ItemProcessor ID: 13948- This is

‘05 Gehl CTL 70

‘83 John Deere 4850

‘1414073 CAT 535C Item ID: Item ID: 13840 Contact: Austin Contact: SAM Ph: (888) 401-6367 x703

Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 with 1700 hours, in very good condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

PROCESSORS ‘04FIREWOOD John Deere 648G III

13878 2010 ShopItem BuiltID: Wood Processor

AUSTIN -Contact: It has a 353 Detroit diesel, 40 Email: Austin@lumbermensco.com inch insert tooth circle saw, 30 foot Phone: 888-401-6367 EXT 703 377  Issue 364

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

a Chomper Contact: AUSTIN Model 16 PDA Email: Austin@lumbermensco.com automatice firewood processor Phone: 888-401-6367 EXT 703 with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and

‘99 EX ampHydro-Ax gauges. Cuts 511 logs up to 16”.

Item ID: One owner and13799 comes with all

chain conveyer, 8 way splitter, on

Contact: SAM and receipts. Purchased 20,000lb goose neck trailer. Item ID manuals Email: Sam@lumbermensco.com 13916. Austin x703 new for $32,500. Item ID 13865.

Phone: 888-401-6367 EXT 702 Best Value Portable Log Splitter Sam x702

LOGGING EQUIPMENT BANDIT 1999 Bandit 1900 ‘05 TigercatTracked 230B Disc

- Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

Item ID: Under 13911Carriage at Chipper - Cat

13HP Honda motor. Manual start

but electronic option is available. or better. 475 hp Cummins Contact:50% AUSTIN Email: Austin@lumbermensco.com Diesel. 7500 Hours. One owner.

Has Log Lift. Uses 4-way wedge Phone: 888-401-6367 EXT 703 adjustable to single two way. Great Well maintained. Item ID 13294.

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple,

Sam x702

2004 Bandit Beast Model 4680 -

Caterpillar Diesel engine 90's3412 Model Timberjack 240A ID:5300 14111 with Item 850 HP. hrs. Mill in

chain and kicker that all runs off condition. Just finished 10 Contact:good WALKER

Email: Walker@lumbermensco.com Acre clearing job, ready to work! of a 4 cylinder Mercedes power Phone: 888-401-6367 Remote control.EXT Big707 production unit. Has a 4’ chain saw that kicks

Lumbermens  since 1986

❘

 List  seLL  exchange  buy  save

‘95 John Deere C6 Tree Farmer Item 13920 '98 ID: Timberjack 460 Contact: Austin Item ID: 14197 Ph: (888) 401-6367 x703

1998-Timberjack 460 grapple skidder comes with set of long axles 11500 hours strong winch tight, dry machine, tires 50% call for video!

capacity!. Item ID 13421. Sam x702 Contact: MARK BARKO Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 1994 Barko 160B - Electric

702-875-2703 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID‘89 13185. x702 CATSam D4H LGP Item ID: 13999 1999 Barko 160D - new engine with

Contact: AUSTIN approximately 1500 hours. Hour Email: Austin@lumbermensco.com meter dont work. The last 2 owners Phone: 888-401-6367 EXT 703 have only used it to load trucks or as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

‘03 John Deere BELL 748GIII

Item ID: 13851 1990 Bell Super T - This Bell has SAM aContact: brand new Duetz engine. Lever Email: Sam@lumbermensco.com control, bar, pump and Phone:33” 888-401-6367 EXTtranny 702 ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

'11 John Deere 85D Item ID: 14158

Boonville, New York www.starwebhosting.net/woodsmen/

wasn’t purchased or used until 2015 was a “leftover” under 1k hours, 8’ wide blade, backhoe, 3 buckets 24”, 30”, 36” one owner longer boom!

The Tree LIKE NEW

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August Prentice 384 with

Danckaert Band - Roughly hours ago, rebuilt fuel Resaw injector, hydraulic rebuilt,

Contact: AUSTIN 72NDContact: ANNUALAUSTIN GREAT LAKES Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com LOGGING & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703

has been rebuilt, it has a 24foot in Contact: MARK feed deck 20 foot out feed deck Email: Mark@lumbermensco.com Phone: 888-401-6367 708 with 44 inch wheels, andEXT all the

702-875-2703 bells and whistles, its a production

Phone: 888-401-6367 EXT 708 Lumbermens has Since 1986, 702-875-2703

published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

06’ Franklin Q80

Escanaba, Michigan

MID-ATLANTIC

LOGGING & BIOMASS EXPO

May be sent to­ morris@lumbermens.co

pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

'01 John Deere 648G3

Item ID 13876. x703 ItemAustin ID: 90899

S & W 125 Band Mill with Excellent Condition Low Price!

Caterpillar generator - Low hours Contact: on the mill,SAM electronic computer Set Email: Sam@lumbermensco.com works,1 1/2" or 2" band,EXT 22ft.702 track Phone: 888-401-6367 Cat 3406 140KW Genset, 12,400

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

AD SUBMISSIONS

Contact: SAM North Carolina Selma, Email: Sam@lumbermensco.com www.midatlantic-logging-biomass­ Phone: 888-401-6367 EXT 7021 expo.com/

Contact: AUSTIN THE PAUL BUNYAN SHOW Email: Austin@lumbermensco.com Fri, 6 Oct - Sun, 8 703 Oct Phone: 888-401-6367 EXT

Donna Heninger

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

it includes two sets of Mcdonough

Lexington, Kentucky Item ID: 14107 http://www.kfia.org/ HardKentuckyWoodExpo.aspx to Find “C” model in great shape!

Email: Austin@lumbermensco.com DIRECTOR Phone:DESIGN 888-401-6367 EXT 703

MAILING ADDRESS

that go up and down, with airbags,

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept '92 CAT 518C Cable Skidder

JohnID: Williams Item 14185 (888) 401-6367 ext. 701 Contact: AUSTIN j@lumbermens.co

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

machine, with air strain conveyers

‘05 Transport Trailers Custom Log Pup MID-ATLANTIC LOGGING & BIOMASS Item ID: JW-538174 Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR '94 John Deere 548E

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

grapple rebuilt, w/winch single arch tight ma10 hours on this machine since it chine 60% rear 40% front 28l's

Thurs, 7 Sept - Sat, 9 Sept

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

new main drive shaft, motor rebuilt 200 or so

HotBucksaw Springs, Arkansas & Delimber www.arkloggers.com Item ID: 14213

Item ID: 14214

PUBLISHER

ADVERTISING SALES

Item ID: 14199

BANDMILLS & HEADSAWS

hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

IntegrIty • PrecIsIon • CARRIAGES QualIty&•DRIVES Value

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

Bell's Machining ..................... 27

Metal Inc. ..............

30 See Detector's why we are your BeSt

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

Woodmaster

with onboard log turners, carriage drive, hyd pac for carriage,

sawyers cab, computer controls, cabinetfor with electronicblades! drives for Source bandsaw carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36 CRD Metalworks .................... 25

We offer the highest quality welds and our people use the 48" bottom saw and 36" top saw Morhighest bark .....................................

9 level of integrity and precision to give you the best Multitek ...................................

12 bandsaw blades in the business—we ship all over the US. Satisfaction13always guaranteed!

Piper's Saw Shop....................

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l ck Cheut Our Quality • Our O

POSTMASTER

L O G G I N G

that Started Contact: MARK it All! Email: Mark@lumbermensco.com

John Deere 648D

Corley Mfg .............................. 32

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

STACKING thIn Kerf RAC Band saw Blades

W

Ite Co Ph

Ask About Our Dismanteling Blades

1-888-857-5153

❘

 24/7 SUPPORT 0 SUPPORT

www.BakerProducts.net

Service Price 800.S48.6914 •I Our S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 29

‘89

Ite Co

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

John Deere 850J Dozer

'12 CAT 573C Feller Buncher

Right around 3500 hours, excellent condition, brand new undercarriage, sprockets, and rollers. Very well maintained. Call for more info!

with SC-57 head, just over 2400 hours, dry, tight, very well maintained, everything works and operates as it should.

Call for more info

Item ID: 14192

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

Item ID: 14193

'94 Barko 160 Knuckleboom Item ID: 14186

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632

Contact:MARK J Williams Contact: Email: Mark@lumbermensco.com Ph: (888) 401-6367 x701 Phone: 888-401-6367 EXT 708

702-875-2703

‘93 Barko 180B

Item ID: 14077 Contact: Austin ‘04 JCB 441 Wheel Ph: (888) 401-6367 Loader x703 Item ID: 13888

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘08 John Deere 335C Item ID: 14089

‘95 John Deere C6 Tree Farmer

L O G G I N G

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘99 Case 850G Long 13428 Victory Ln. // PO Box 124 ‘89 Timberjack 230A Track Dozer Item ID: 13909NY 13606 Adams Center,

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Item ID: 13885

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

off onto a conveyor. This is a very

well built processor. Item ID 13820.

“13 KMC 2500 Tack Skidder Item ID: 14078

Contact: AUSTIN ‘05 Gehl CTL 70 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Item ID: JW-986495

Contact: J Williams Ph: (888) 401-6367 x701

‘83 John Deere 4850

‘05 CAT TK560

ID: 14004 chainItem conveyer, 8 way splitter, on Item ID: 14073 20,000lb goose neck trailer. Item ID Contact: Austin Contact: SAM 13916. Austin x703 Ph: (888) 401-6367 x703Email: Sam@lumbermensco.com with 1700 hours, in very good

Phone: 888-401-6367 EXT 702 Best Value Portable Log Splitter

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

‘93 Barko 180B FIREWOOD PROCESSORS

Item ID: 14077 2010 Shop Built Wood Processor AUSTIN -Contact: It has a 353 Detroit diesel, 40 Email: Austin@lumbermensco.com inch insert tooth circle saw, foot Phone: 888-401-6367 EXT30 703 377  Issue 364

- Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

13HP Honda motor. Manual start but electronic option is available.

Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

John log‘85 deck.

Has a Deere hydraulic440D grapple, Item ID: 12453 chain and kicker that all runs off Contact: AUSTIN of a 4 cylinder Mercedes power Email: Austin@lumbermensco.com unit.

Has888-401-6367 a 4’ chain saw EXT that 703 kicks Phone:

Lumbermens  since 1986

❘

Sam x702

‘09 John Deere Firewood Processor - This is 650J XLT

tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

grapple, 5,000 original hours.

13238. Chris x700 Item ID: 14070

1995 BarkoAUSTIN 775 B Feller Buncher Contact: -Email: PumpsAustin@lumbermensco.com recently redone. 400 hrs Phone: 888-401-6367 EXT 703 on injection pump. always started good. in good working order. 22in kohing head. head works great.

1999 Barko 160D - new engine with

manuals and receipts. Purchased

approximately 1500 hours. Hour

new for $32,500. Item ID 13865.

meter dont work. The last 2 owners

Sam x702

LOGGING EQUIPMENT BANDIT

have only used it to load trucks or

as a backup as needed. Has a CTR

90’ CAT 213 Excavator

‘80 John Deere 540B Chipper - Cat Under Carriage at Item ID: 11345 50% or better. 475 hp Cummins Contact: Diesel.

7500AUSTIN Hours. One owner.

Email: Austin@lumbermensco.com Well maintained.

Item IDEXT 13294.

Phone: 888-401-6367 703 Sam x702 with 850 HP. 5300 hrs. Mill in

motor, Rotobec continuous

Item ID 13185. Sam x702

One owner and comes with all

3412 Caterpillar Diesel engine

knuckleboom, 30' boom, 75hp

‘95 Bell Ultra T

automatice firewood processor Contact: AUSTIN Email: Austin@lumbermensco.com with John Deere power unit with Phone: 888-401-6367 EXT 703 low hours. Control panel includes

2004 Bandit Beast Model 4680 -

1994 Barko 160B - Electric

(excellent condition.). Item ID

a Chomper Model PDA Item ID: 16 14091

1999 Bandit 1900 Tracked Disc

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

delimber, Item grapple been rebuilt.

ID:has 14110 Boom cylinders have minor leaks.

Currently has 3316 hours.

Item ID 13694. Sam x702

Contact: AUSTIN 94 Barko 275 - Excellent value Email: Austin@lumbermensco.com with low at hours at 3,500. 5.9 Phone: 888-401-6367 EXT 703 CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam

‘02 Jackson Shavings Mill x702 Item ID: 13736 BELL

Contact:1990 AUSTIN Bell Super T - This Bell has good condition. Just finished 10 Email: Austin@lumbermensco.com a brand new Duetz engine. Lever Acre clearing job, ready to work!

Phone: 888-401-6367 EXT 703 control, 33” bar, pump and tranny Remote control. Big production

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and JohnofDeere 648D at Location Itemall ID:equipment 14255 www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York

230D Timberjack Forwarder

Item ID: 3778 www.starwebhosting.net/woodsmen/

Item ID: 14247

Contact: AUSTIN Email: Austin@lumbermensco.com Since 1986, Lumbermens has Phone: 888-401-6367 EXT 703 published a monthly circular

Contact: AUSTIN Contact: LIZ 72NDEmail: ANNUAL GREAT LAKES Austin@lumbermensco.com Email: Liz@lumbermensco.com LOGGING Phone: & HEAVY EQUIPMENT 888-401-6367 EXTEXPO 703 Phone: 888-401-6367 EXT 701

The Tree it All!

07’ Tigercat 620C

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants‘00 Timbco 445D worldwide.

Item ID: 14096

PUBLISHER Contact: AUSTIN

Woods Publishing Email: Austin@lumbermensco.com

MID-ATLANTIC Phone: 888-401-6367 EXTLOGGING 703 ADVERTISING SALES & BIOMASS EXPO

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR

2015 Cat 525D

John Williams Item ID: 14167 (888) 401-6367 ext. 701 j@lumbermens.co Contact: AUSTIN

DESIGN DIRECTOR Donna Heninger

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Escanaba, Michigan

Contact: feed deck MARK 20 foot out feed deck Email: Mark@lumbermensco.com

with 44 inch wheels, and Phone: 888-401-6367 EXTall 708the

702-875-2703

bells and whistles, its a production machine, with air strain conveyers

'13 John Deere 548G III

that go up and down, with airbags,

Item ID: 8789 MID-ATLANTIC LOGGING & BIOMASS it includes two sets of Mcdonough Fri, 15 Sept - Sat, 16 Sept 5600 Hours, 23.1 Tires.

pressure guides. Top Casting wheel Selma, North Carolina Contact:isSAM www.midatlantic-logging-biomass­ supported on both sides. This Email: Sam@lumbermensco.com expo.com/ is an extremely accurate machine

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Thurs, 7 Sept - Sat, 9 Sept

BANDMILLS & HEADSAWS

Phone: 888-401-6367 EXT 702 in ve1y good condition, Cuts 130

feetTimberjack a minute also has 207CLT presses.

Item ID 13876.

Austin x703 Item ID: 14144

S&W 125 engine, Band Mill with Out of frame rebuilt out of frame rebuilt transmission, rebuilt reverse box. Runs great, paper work Caterpillar generator Low hours documenting all work done.

on the mill, electronic computer Set

Contact: MARK Email: Mark@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 708 OR 702-875-2703

** INFO LINK**

Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

ItemSaw ID: Shop 13869 Piper's .................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper ............................

Ph: (888) 401-6367 x70240

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

2006 CAT 517 Contact: Sam

‘14 Komatsu WA200 ❘ 0  24/7 SUPPORT SUPPORT Loader

 SELL YOUR EQUIPMENT TODAY TODAY l§

One Owner, low hours!

with onboard log turners, carriage drive, hyd pac for carriage,

‘14 Hurdle 3-Hd carriage knees, husk including Block Sawmill

48"Item bottom and 36" top saw ID:saw 13997

Contact: Austin Ph: (888) 401-6367 x703

STACKING RAC Firewood Proc.

Item ID: 13865 Contact: Sam www.BakerProducts.net Ph: (888) 401-6367 x702 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS NO. 31 401-MENS boom loader, 3 knife disc, Newer

discharge chute, New banding

L O G G I N G

2010that Tigercat 724E Started

SOUTHWEST FOREST PRODUCTS EXPO 353 Detroit Engine, Unknown hours, Standard Trans, Husky Brute loader Fri, 25 August - Sat, 26 August works well but pins are loose, No major leaks, New Brakes and Drums, 2 Hot Springs, Arkansas Item ID: 14248 www.arkloggers.com extra tires at 50%

Grapple Skidder Currently 6303 original hours!

Meter is working, comes with 28L tires at 85%(NOT TIRES IN PICS) 2 1/2 years ago the motor was overhauled by John Deere great winch, tight pins, dry Danckaert Band Resaw - Roughly machine no leaks, woods ready/working machine! maintenance done 250-300 hours paper work docu10 hours on this machine since it menting work from John Deere. Part time loggers selling only because recently got new equipment. has been rebuilt, it has a 24foot in

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘04 Fabtek 344B Item ID: JW-093430

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

L O G G I N G

'94 CAT 518 Grapple Winch Item ID: 99807

12k hours runs great tight center section

One Of AItem Kind.ID: Has Never Pulled A Log. JW-909632 Owned By An Electric Company. Deal!

Comes with a set of tracks.

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Item ID: 9901

Skidsteer (DEMO)

Contact: J Williams (888) 401-6367 x701 Contact:Ph: SAM

Item ID:Forwarder 14077 Contact: Austin Item ID: 14109 Ph: (888) 401-6367 x703

D5H TSK

Item ID: 7098 LOW Hours, Excellent Condition, Very Hard To Find Dozer.

‘95 John Deere C6 Tree Farmer

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Item 14106 Item ID:ID: 14078 Contact: Austin Contact: Ph: AUSTIN (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Item ID: 14079 Adams Center, NY 13606 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

off onto a conveyor. This is a very

Item ID: 1559

Ready to run, operates from either end, Va Area Contact: ‘05 LIZ Gehl CTL 70 Email: Liz@lumbermensco.com Item ID: JW-986495 Phone: 888-401-6367 EXT 701

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

with 1700 hours, in very good

condition. Easily produces high

'02 WoodMizer LT-40

quality chips with Item ID:patented 11345 ‘Cone’ drum design.

Can easily load 42’ Kubota Diesel engine. vans and produce 6 - 8 loads per Contact: AUSTIN day.

Item ID 13882. Austin x703 Email: Austin@lumbermensco.com Phone:EDGERS 888-401-6367 EXT 703 & GANGS Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter

'11-'12 Helle Sawmill

- Small manufacturer in PA has Item ID: 14119 made the best valued log splitter.

56” auto carriage hydraulic head control Handles logs up to 32”. Uses cab, vertical 2 saw edger log turner, 5 log 13HP Honda motor. stop and load deck, 60’ Manual long track.start but electronic option is available.

Contact: MARK Has LogMark@lumbermensco.com Lift. Uses 4-way wedge Email: Phone: EXT 708 adjustable888-401-6367 to single two way.

Great

702-875-2703 Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

‘05homemade Woodmizer processorLT300 with a 10’

Item ID: 14031 log deck. Has a hydraulic grapple, Contact:chain AUSTIN 2010 Shop Built Wood Processor and kicker that all runs off Email: Austin@lumbermensco.com - It has a 353 Detroit diesel, 40 Phone: of a 4 cylinder 888-401-6367 Mercedes EXT 703 power inch insert tooth circle saw, 30 foot unit. Has a 4’ chain saw that kicks

FIREWOOD PROCESSORS

377  Issue 364

Lumbermens  since 1986

❘

Item ID: 6307

1995 model with automatic setworks, variable speed feed & hydraulic conveyer.

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Quality 4 Head Trim Saw

Item ID 13644. Sam x702

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703Saw Cornell Double End Trim

‘13 KMC 2500 Track Skidder '09 John Deere 753J Buncher

532 CAT Feller Buncher

S A W M I L L

‘9301’ Barko 180B Ponsee Bison

'97 CAT‘16 525 Halverson Original CableH140 Skidder

well built processor. Item ID 13820.

capacity!. Item ID 13421. Sam x702 Contact: AUSTIN BARKO Email: Austin@lumbermensco.com Phone: 888-401-6367 1994 Barko 160B - ElectricEXT 703

931-797-8029 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Frick #1 Jumbo Mill

grapple, 5,000 hours.

Item ID:original 200 (excellent ID Complete operationcondition.). that includes a Item meadows

Sam x702

Firewood Processor - This is

edger, HMC V206 Debarker, 48” Chipper, Chris x700other spare parts. blower,13238. live decks, and many

a Chomper Model 16 PDA

1995 Barko 775 B Feller Buncher automatice firewood processor Contact: AUSTIN

Email: Austin@lumbermensco.com - Pumps recently redone. 400 hrs with John Deere power unit with Phone: 888-401-6367 EXT 703 OR 931-797-8029

low hours. Control panel includes

on injection pump. always started

amp gauges. Cuts logs up to 16”.

kohing head. head works great.

tach, oil pressure, water temp and One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT Baker 2BANDIT Head Resaw

Item 6828 Disc 1999 Bandit 1900ID: Tracked

Chipper - Catruns Under Carriage With return, 1 inch bands, at runs good 50% or better. 475 hp Cummins Diesel.

7500LIZ Hours. One owner.

Contact: Email: Liz@lumbermensco.com Well maintained. Item ID 13294.

Phone: 888-401-6367 EXT 701 Sam x702 2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

good. in good working order. 22in Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

Woodmizer delimber, grapple has LT300 been rebuilt.

Item ID: 14278 Boom cylinders have minor leaks.

Call for info!

Item ID 13694. Sam x702 Contact: MARK 94 BarkoMark@lumbermensco.com 275 - Excellent value Email: Phone: 888-401-6367 EXT with low at hours at 3,500.

5.9708

702-875-2703 CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam

1996 Jackson Shavings Mill x702 Item ID: 1271

BELL

Model 30D6

good condition. Just finished 10

1990 Bell Super T - This Bell has

Contact: AUSTIN

Email: Austin@lumbermensco.com a brand new Duetz engine. Lever Acre clearing job, ready to work!

Phone: 888-401-6367 EXT 703 OR 931-797-8029

Remote control. Big production

 List  seLL  exchange  buy  save

control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

'02 Woodmizer LT-40 Super HD Item ID: 14118

Has the Kubota Diesel Motor!

NY STATE WOODSMEN'S FIELD DAYS Contact: AUSTIN Fri, 18 August - Sun, 20 August Email: Austin@lumbermensco.com New York Phone: Boonville, 888-401-6367 EXT 703 www.starwebhosting.net/woodsmen/

Sawmill Hot Springs, Package Arkansas Item ID: 14084 www.arkloggers.com

The Tree Sanborn Scragg Mill that Started Item ID: 14050 it All!

Contact: AUSTIN Email: Austin@lumbermensco.com 72ND ANNUAL GREAT LAKES Phone: 888-401-6367 EXT 703 LOGGING & HEAVY EQUIPMENT EXPO

Contact: AUSTIN Email: Austin@lumbermensco.com Since 1986, Lumbermens has Phone: 888-401-6367 EXT 703 published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR

John Williams Corley Complete Sawmill (888) 401-6367 ext. 701 Item ID: 14035 j@lumbermens.co

Contact: AUSTIN DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 703

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

‘06 Woodmizer LT70 Electric Item ID: 14076

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

Lexington, Kentucky http://www.kfia.org/ Wood-Mizer LT40 KentuckyWoodExpo.aspx Item ID: 13995

Contact: AUSTIN AUSTIN SHOW THE Contact: PAUL BUNYAN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Fri,Phone: 6 Oct888-401-6367 - Sun, 8 OctEXT 703 Phone: 888-401-6367 EXT 703

Cambridge, Ohio www.ohioforest.org

** INFO LINK**

BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly

‘13hours Woodmizer 4000 Sawmill 10 on this machine since it Item ID: 14000 has been rebuilt, it has a 24foot in Contact: AUSTIN feed deck 20 foot out feed deck Email: Austin@lumbermensco.com with 44 inch wheels, and all the Phone: 888-401-6367 EXT 703 bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine

Super in ve1y'16 goodLT40 condition, Cuts 130

Hydraulic feet a minute also has CLT presses.

Item ID: 9903 Item ID 13876. Austin x703 136 hours, SOne & WOwner!

125 Band Mill with Tons of Extra Parts. Priced cheap!

Caterpillar generator - Low hours Contact: on the mill,SAM electronic computer Set Email: Sam@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 702 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric Austin ............................ 20 Contact:

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

‘05 Tigercat 230B Item ID: 13911

Dyna Products ........................ 35

Ph: (888) 401-6367 x703 11 Sawmill Exchange ..................

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

‘99 Hydro-Ax WoodMizer ................................ l 511EX

ID: ❘ 13799  SELL YOUR EQUIPMENTItem TODAY  24/7 SUPPORT l§ TODAY 0 SUPPORT Contact: Sam Ph: (888) 401-6367 x702

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

‘97 Prentice 210E

Item# 13795 Contact: Sam Ph: (888) 401-6367 x702

2006 Logosol Planer - This is a 10” 4 sided planer that has removable side cutters that will take up to

12” lumber and includes a blower system. Item ID 13428. Sam x702

POLE & POST PEELERS

PS8 Post Peeler - This peeler has

www.BakerProducts.net been converted to electricity over 800.S48.6914 I S73.663.7711 hydraulic. Comes with a operators

boxes, conveyor and ❘ cab,  electric (888) 401-MENS NO. 33 L! 401-MENS kickers and will peel a 3” post to a

7” post. Comes with a barko loader

S A W M I L L

SOUTHWEST FOREST PRODUCTS EXPO Complete Fri, 25Edmiston August - Sat, 26 August

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘08 Timberking B20 Item ID: 13956

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘93 Barko 180B

‘16 Halverson H140 ‘06 Brewco B1600 Resaw Skidsteer (DEMO) Item ID: 13862

Meadows #1 Complete Sawmill

Item ID: 14077 Contact: Austin 3-HD ‘14 Hurdle Ph: (888) 401-6367 x703 Block Sawmill

Item ID: JW-909632

Item ID: 14069

Item ID: 13997

Contact:Contact: SAM J Williams Email: Sam@lumbermensco.com Ph: (888) 401-6367 x701 Phone: 888-401-6367 EXT 702

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

S A W M I L L

Woodmizer LT40 Sawmill Item ID: 14227

2010 Woodmizer lt40 2250 hours 28 hp koeler v-twin gas engine extender arms simple setworks hydraulic deck all lever controlled low hours

‘95 John Deere C6 Contact: Tree MARK Farmer Email: Mark@lumbermensco.com

Item ID: EXT 13920 Phone: 888-401-6367 708 or 702-875-2703

Contact: Austin ‘13 KMC 2500 Track Ph: (888) 401-6367 x703 Skidder Woodmizer Twin Blade

Danchaert Band 13428 Victory Ln. Resaw // PO Box 124 Meadows #2 Deluxe

Item ID: 13876NY 13606 Adams Center, Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Item ID: 14250

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Diesel Edger Item ID: 14078 Item ID: 14191 Contact: Austin capacity!. Item ID 13421. Sam x702 Ph: (888) 401-6367 x703 Contact: AUSTIN BARKO

Email: Austin@lumbermensco.com Barko 160BEXT - Electric Phone: 1994 888-401-6367 703 knuckleboom, 30' boom, 75hp off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

(excellent Itemcondition.).

ID: 14171 Item ID 13238. Chris x700 AUSTIN Barko 775 B Feller Buncher automatice firewood processorContact:1995 Email: Austin@lumbermensco.com Pumps recently redone. with John Deere power unit with Phone: 888-401-6367 EXT 703 400 hrs on injection pump. always started low hours. Control panel includes Firewood Processor - This is a Chomper Model 16 PDA

‘05 Gehl CTL 70 Baker Sawmill & Edger Item ID: 14226

‘83 2008 BakerJohn sawmill andDeere Edger less than 5600 hours 3665D 85 hp cummings engine has 2500 Hours, new breather, regular maintanence brand new track/con4850 duate produces 6-7k feet per day. Baker edger 28hp predator setworks hydraulic setworks are Itemengine ID:baker 14073 automatic has full owners manual

MISCELLANEOUS

Contact: Austin Contact: Ph: (888)MARK 401-6367 x703

Item ID: JW-986495 Contact: J Williams Precision Scragg Ph: (888)Item 401-6367 x701 ID: 3607

in good working tach, oil pressure, water temp and '15 good.

Blockbuster 18-20order.

Plus22in

Precision Scragg, excellent condition, 40 hp twin saw motor, 4,6,8,and 10 chain way of splitter, on inches,conveyer, can send8video it running, Va Area goose neck trailer. Item ID 20,000lb

Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703 with 1700 hours, in very good

13916.

Austin Contact: LIZx703 Email: Liz@lumbermensco.com Best Value Portable Log Splitter Phone: 888-401-6367 EXT 701 - Small manufacturer in PA has

quality chips with patented ‘Cone’

Handles logs up to 32”. Uses

condition. Easily produces high

drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

'99 International 4700 in excellent condition. Runs great.

Chip Truck Item ID 13644. x702 ItemSam ID: 14116

FIREWOOD PROCESSORS

Only 71,697 Miles.

2010 Shop Built Wood Processor AUSTIN - Contact: It has a 353 Detroit diesel, 40 Email: Austin@lumbermensco.com inch insert tooth circle saw, 30 foot Phone: 888-401-6367 EXT 703 377  Issue 364

made the best valued log splitter.

13HP Honda motor. Manual start

amp gauges. Cuts logs up to 16”.

One owner and comes with all manuals and receipts.

Sam x702

LOGGING EQUIPMENT BANDIT ‘78 Windzer Forklift

Email: Mark@lumbermensco.com meter dontEXT work.

The last 2 owners Phone: 888-401-6367 708 OR 702-875-2703

1999 Bandit 1900 Tracked Disc Item ID: 14235

Chipper - Cat Under Carriage at

Value! PA. Item ID 12062. Sam x702

Sam x702

homemade processor with a 10’

Item ID: 14139 3412 Caterpillar Diesel engine

2004 Bandit Beast Model 4680 Chomper Firewood Processor

with HP. 5300 hrs. diesel Mill inengine log deck. Has a hydraulic grapple, Under 300 hrs850 65 hp John Deere sheers the log no sawdust

good condition. Just finished 10

Contact: MARK Acre clearing job, ready to work! of a 4 cylinder Mercedes power Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT Big 708 production Remote control. unit. Has a 4’ chain saw that kicks

702-875-2703

Lumbermens  since 1986

❘

Item ID: 14148 Item ID 13185. Sam x702

approximately 1500 hours. Hour new for $32,500. Item ID 13865.Contact: MARK

but electronic option is available.

50% or better. 475 hp Cummins Contact: MARK Diesel. 7500 Hours. One owner.

Has Log Lift. Uses 4-way wedge Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703 adjustable to single two way. Great Well maintained.

Item ID 13294.

chain and kicker that all runs off

Firewood kohing head. Processor head works great.

with 30ft conveyer! Only has about 150 hours. Excel1999 Barko 160D - new engine with Purchased lent condition.

1978 Windzer Forklift needs fuel pump call for more info

Firewood Processor - This is a

motor, Rotobec continuous

03’ Woodmizer LT-300 grapple, 5,000 original hours.

Operation

 List  seLL  exchange  buy  save

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

Morgan Band Resaw

with low atItem hours 3,500. 5.9 ID:at4849

CUMMINS continuous grapple.

with runaround system, 40 Hp saw motor

with cab controls andID panel, Lots Sam of extra Runs Great!.

Item 13740.

bands and filing equipment. Running

x702 NOW. Setworks and in-feed and-out feed decks NOT INCLUDED in this price...

BELL they will not be sold Hydralic power pack included with Morgan, Va area

1990 Bell Super T - This Bell has

aContact: brand new LIZDuetz engine. Lever Email: Liz@lumbermensco.com control, bar, pump and Phone:33” 888-401-6367 EXTtranny 701 ❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

Kenworth Log Truck

359 Peterbilt Truck

Item ID: 4849

Item ID: 7841

The Tree that Started it All! Contact: AUSTIN

1987 model with 600,000 Miles. Has 400 Cummins engine, air ride suspension, 40 rears, and all new drive tires. Can be sold with or without a Pitts log trailer

Email: Austin@lumbermensco.com Since 1986, Lumbermens Phone: 888-401-6367 EXT has 703 published 931-797-8029 a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

SOUTHWEST FOREST PRODUCTS EXPO 1990 model with 300,000 original miles. Has 444Fri, Cum- 25 August - Sat, 26 August

Contact: AUSTIN AUSTIN 72ND Contact: ANNUAL GREAT LAKES Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXTEXPO 703 LOGGING & HEAVY EQUIPMENT

931-797-8029

931-797-8029

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

Item ID: 14087

Contact: AUSTIN Email: Austin@lumbermensco.com MID-ATLANTIC ADVERTISING SALES Phone: 888-401-6367 LOGGING & BIOMASS EXT EXPO 703

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Fri, 15 Sept - Sat, 16 Sept

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

Phone: 888-401-6367 EXT 703

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

AUSTIN SHOW THE Contact: PAUL BUNYAN Email: Austin@lumbermensco.com Fri, 6 Oct - Sun, 8 Oct

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

is an extremely accurate machine

** INFO

Cambridge, Ohio www.ohioforest.org

feet a minute also has CLT presses.

Item ID 13876. Austin x703

Kenworth Road Tractor Truck

Caterpillar generator - Low hours Item ID: 14092 on the mill,AUSTIN electronic computer Set Contact:

Email: Austin@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434.

Sam x702

We also offer expert Sharpening Services, plus…

CARRIAGES & DRIVES

B & B Mfg. ............................... 18

2010 Cardinal HD Carriage Gang • Edger • Scragg LINK** Carriages (Sawmill) - Cardinal line it includes carriage Trim •Carriage Split • Strob M&F Gauge .............................

28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

We(888) have the most popular sizes in stock & ready to 401-6367 ext. 703 austin@lumbermens.co ship from major manufacturers, including…

MAILING ADDRESS

is supported on both sides. This

S & W 125 Band Mill with

BANDSAW BLADES Austin Woods

pressure guides. Top Casting wheel

http://www.kfia.org/ 3406 Cat engine and 4424 total KentuckyWoodExpo.aspx machine hours.

Phone: 888-401-6367 EXT 703

EQUIPMENT REPS

it includes two sets of Mcdonough

in ve1y good condition, Cuts 130

John Williams Item ID: 14188 (888) 401-6367 ext. 701 j@lumbermens.co Contact: AUSTIN

DESIGN DIRECTOR Email: Austin@lumbermensco.com

that go up and down, with airbags,

'91 Fuel Harvester KENTUCKY WOOD EXPO Grinder Fri, 15 SeptTub - Sat, 16 Sept Item ID: 14112 Lexington, Kentucky

MARKETING DIRECTOR '99 Peterbilt Road Tractor

Item ID: 14153 Danckaert Band Resaw - Roughly 77hours General Logmachine Trailer with parts 10 on this since it and extras. Call for more info. has been rebuilt, it has a 24foot in Contact: MARK feed deck 20 foot out feed deck Email: Mark@lumbermensco.com with 44 inch wheels, andEXT all the Phone: 888-401-6367 708

702-875-2703 bells and whistles, its a production

machine, with air strain conveyers

Mack Log Truck MID-ATLANTIC LOGGING & BIOMASS

Woods Publishing

Donna Heninger

HotSun Springs, Arkansas 4 Bolster Log Trailer www.arkloggers.com Item ID: 8256

mins engine, 15 speed transmission, 46 rears. Recently had new head, pistons, rings, and New steer tires installed. Can be sold with or without a Pitts log trailer.

77BANDMILLS General&Log Trailer HEADSAWS

Baker ...................................... 5, 7

with onboard log turners, carriage just about any Custom Saws you drive, hyd pac for carriage, need to keep you cutting longer…

Menominee Saw ..................... 29 sawyers cab, computer controls, for less!

…and

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31 Welded to your lengths!

POSTMASTER

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Call Marvin Exchange Miller for Lumberman's P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

48" bottom saw and 36" top saw

a quote 231-924-5953 • (fax) 231-924-6166 • 11606 Brickyard Rd. • Holton, MI 49425

STACKING ROW ELECTRICAL EQUIPMENT, RAC INC. Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is CW Mill-ArmorHog .............. 17 Rotochopper............................ 40 published monthly by Woods CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 Publishing, P.O. Box 1916, Columbia, TN 38402. All rights Dyna Products ........................ 35 Sawmill Exchange .................. 11 reserved. All editorial/ advertorial YOUR SOURCE FOR USED, RECONDITIONED: submissions are used at the Empire Hydraulics ...................

Select Sawmill .........................

• Squirrel Cage Motors 8• DC Motors - Crane and Mill 19 • Transformers, Three-Phase discretion of the publisher and may • Gear Speed Drives •4 Across/Line Magnetic Starters be edited for purposes of clarity Great LakesMotors Mfg. .................... 34• Adjustable Smith Sawmill ........................... and space. Although all efforts have • Wound-Rotor Motors • Generators - AC and DC • Reduced Voltage Starters Hahn Machinery ...................... 3 The Paul Bunyan Show ......... 39 been made to ensure accuracy of • Synchronous Motors • Engine-Generator Sets • SafetyItem Switches ID: 13926 content submitted by advertisers • DC Motors • Transformers, Single Phase • Phase Convertors Hurst Boiler .............................

14 Thomas Industrial Controls .....

10 Contact: Sam and writers, the Lumberman's Exchange, its principles and Ph: (888) 401-6367 x702 P.O. Box 281221• Toledo, Ohio 43606 Iron Bull ...................................

Union Grove Saw & Knife.. 2, 37 Item ID: 13994 associates, are not held liable for ax to Contact: Austin errors or omissions. Reproduction, WWW.RoWELECTRiCAL.CoM Kilgore .............................

22 Universal Refiner ................... 23 Item ID:Saw 13898 in whole or part, is prohibited with­ Ph: (888) 401-6367 x703 419-248-4479 cylinder engine. Recently replaced rowelec@glasscity.net Contact: www.BakerProducts.net Lignomat Sam ................................. 24 WoodMizer ................................ l out written consent. turbo.

23.1 tiresI at 50%. 16” Rapid Ph:THE (888) PHONE 401-6367 x702 800.S48.6914 S73.663.7711 WE ANSWER 24 HOURS • WE BUY USED ELECTRICAL ©2017 Woods Publishing

608B F ‘05 Timberjack :

419-244-8887

Electric 3Phase Slab Edger - USED FORESTRY EQUIPMENT FOR SALE SALE Item ID: 13998 Contact: Austin

❘

Shop Built Firewood Proc.

800-248-4479

chipper hood for easy knife access.

 SELL YOUR EQUIPMENT TODAY chain 24/7infeed SUPPORT l§ SUPPORT 30TODAY ft. x 10 ft ❘ CAT0 bed.

condition machine. Item ID 13486.

PSB Post Peeler

Enclosed weatherized operators’

Buncher shear head. Machine is ❘ fast  and (888) NO. 35 L! 401-MENS in 401-MENS very good condition.

Item ID 12531. Sam x702

M I S C E L L A N E O U S

Boonville, New York www.starwebhosting.net/woodsmen/

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

1990 Freightliner Item ID: 7422

'10 Woodsman 440 Whole Tree Chipper Item ID: 14105

3,000 original hours.

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘16 Halverson H140 Skidsteer (DEMO)

Cummins motor w/Jake Brake, 9 speed Eaton Fuller, Air Ride over spring suspension, 11.22.5 fair tires, 15'10" of frame from cab back, has A/C but not Item ID: JW-909632 working, 322,470 miles

Western Star Heavy Haul Item ID: 14093

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Contact: J Williams Ph: (888)LIZ 401-6367 x701 Contact:

Email: Liz@lumbermensco.com Phone: 888-401-6367 EXT 701

‘93 Barko 180B

Item ID: 14077 Contact: Austin AM General M818 Army Truck Ph: (888) 401-6367 x703 Item ID: 14576

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

‘04 Takeuchi TLN140

M I S C E L L A N E O U S

Item ID: JW-880805

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘13 KMC 2500 Track Skidder

Shop Built Firewood Processor 13428 Victory Ln. // PO Box 124

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

Item ID: 13994NY 13606 Adams Center,

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

off onto a conveyor.

This is a very '93 KW 425 CAT ID:13342 well built Item processor.

Item ID 13820.

‘06 Cord King Model 60 Item ID: 14068

‘05 Gehl CTL 70 Contact: AUSTIN

‘83 John Deere Shop Built Wood 4850 Processor

Item ID: 14073 Item ID: 14038 Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 with 1700 hours, in very good condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item"Like ID 13644.

Sam x702 New" Tajfun

Firewood Processor FIREWOOD PROCESSORS

Item ID: 14249 2010 Shop Built Wood Processor AUSTIN -Contact: It has a 353 Detroit diesel, 40 Email: Austin@lumbermensco.com inch insert tooth circle saw, 30 foot Phone: 888-401-6367 EXT 703 377  Issue 364

Email: ID: Austin@lumbermensco.com Item JW-986495 Phone: 888-401-6367 Contact: J Williams EXT 703 Ph: (888) 401-6367 x701

Sam withx702 ten speed 220 Inframe twenty four feet of frame Firewood Processor - This is behind the cab a Chomper Model 16 PDA automatice firewood processor Contact: WALKER Email: Walker@lumbermensco.com with John Deere power unit with Phone: 888-401-6367 EXT 707 low hours. Control panel includes

tach, oil pressure, water temp and '98 International Chipper Truck

ID:Cuts 14140 amp Item gauges. logs up to 16”.

164k miles can haul 15 cubic yards, chain conveyer, 8 way splitter, on One owner and comes with all 12' long, small stash compartment, very well 20,000lb goose neck trailer. Item ID truck manuals and receipts. Purchased kept 13916. Austin x703

Contact: new MARKfor $32,500. Item ID 13865.

Email: Mark@lumbermensco.com Best Value Portable Log Splitter Sam x702 Phone: 888-401-6367 EXT 708 OR 702-875-2703

- Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

LOGGING EQUIPMENT BANDIT 1999 Bandit 1900 Disc ‘83 InternationalTracked S-Series

Item ID: Under 14080Carriage at 13HP Honda motor. Manual start Chipper - Cat Contact:50% AUSTIN but electronic option is available. or better. 475 hp Cummins Email: Austin@lumbermensco.com Diesel.

7500 Hours.

One owner.

Has Log Lift. Uses 4-way wedge Phone: 888-401-6367 EXT 703 adjustable to single two way. Great Well maintained. Item ID 13294.

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Sam x702

2004 Bandit Beast Model 4680 -

3412 Caterpillar Diesel engine homemade processor with a 10’‘06 Western Star Michigan Special ID:5300 14011 with Item 850 HP. hrs. Mill in log deck. Has a hydraulic grapple, chain and kicker that all runs off condition. Just finished 10 Contact:good AUSTIN Email: Austin@lumbermensco.com Acre clearing job, ready to work! of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 Remote control. Big production unit. Has a 4’ chain saw that kicks

Lumbermens  since 1986

❘

 List  seLL  exchange  buy  save

‘95 John Deere C6 Tree Farmer Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

‘15 Cord King M44

ID:13421.

13961Sam x702 capacity!.Item Item ID

BARKO Contact: AUSTIN Email: Austin@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 703 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

Offworking Trimorder.

Saw22in good.Cut in good Item ID: 5461 kohing head. head works great.

10 HP cut x702 off blade, 5 HP Item IDmotor 13185.on Sam motor on feed chain, Good Condition.

1999 Barko 160D - new engine with Contact: LIZ 1500 hours. Hour approximately Email: Liz@lumbermensco.com meter dont work. The last 2 owners Phone: 888-401-6367 EXT 701 have only used it to load trucks or as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL 3 Strand Log Deck

Item ID: 14095 1990 Bell Super T - This Bell has

AUSTIN aContact: brand new Duetz engine. Lever Email: Austin@lumbermensco.com control, 33” bar, pump and tranny Phone: 888-401-6367 EXT 703 ❘

 LumbermensCO.com

** CALENDAR**

BOBCAT 610

02’ Jackson Lumber Harvester

www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, Aspen Brush Chipper pallet makers, recyclers and Item ID: 14270 industrial woodworking plants inline 6 cylinder ford engine, 3165 hours, runs good, worldwide. ready to work, tires and wheels like new, handles up to 4" diameter brush,PUBLISHER automatic feed

Woods Contact: MARKPublishing Email: ADVERTISING Mark@lumbermensco.com Phone: 888-401-6367SALES EXT 708 Morris Woods

702-875-2703 (888) 401-6367 ext. 704 morris@lumbermens.co

www.midatlantic-logging-biomass­ Contact: LIZ expo.com/ Email: Liz@lumbermensco.com

MARKETING DIRECTOR 94’ Mack with Prentice 120 John Williams Item ID: 14215 (888) 401-6367 ext. 701 j@lumbermens.co Contact: AUSTIN

Email: Austin@lumbermensco.com

DESIGN DIRECTOR Phone: 888-401-6367 EXT 703 Donna Heninger

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Escanaba, Michigan

Precision Lower Pipe 1000 hrs, 425 hp Volvo Engine, MID-ATLANTIC LOGGING & BIOMASS Transfuild Clutch, Remote Control, Rev Fan, 25ft Stacking conveyor, FixFri, 15 Precision pipe Septlower - Sat, 16 Sept hammer Va. area Brand new Selma, North Carolina Contact: LIZ MID-ATLANTIC LOGGING & BIOMASS EXPO Email: Liz@lumbermensco.com Phone: 888-401-6367 EXT 701

Phone: 888-401-6367 EXT 701

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

Now One Phone Puts You Austin Woods in(888)Touch ThE Single Source 401-6367 with ext. 703 austin@lumbermens.co INFO for all your Sawmill Needs!

MAILING ADDRESS

**

B & B Mfg. ............................... 18 P.O. Box 1916 Corley Columbia, TN Sawmill 38402-1916 maChinery B. H. Payne .............................. 16 (888) 401-6367 Berry Carriage DriveS Tyrone

Cambridge, Ohio www.ohioforest.org

Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept 2011 Dynamic

Horizontal Grinder

BANDMILLS & HEADSAWS

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers Precision Chipper

that go upItem and down, with airbags, ID: 4524 it66includes two Precision sets of Mcdonough inch ReBuilt Chipper good shape pressure guides. Top Casting wheel isContact: supported LIZon both sides. This Liz@lumbermensco.com isEmail: an extremely accurate machine Phone: 888-401-6367 EXT 701 in ve1y good condition, Cuts 130 feetDynamic a minute alsoChipper has CLT presses.

'08 ID: 14196 Item Item ID 13876.

Austin x703

S &dynamic W 125 Band Mill585with 2008 conehead chipper model 1762 hours great condition 500 hp john deere comes with $2k worth of new knives Caterpillar generator hours new drum with about 6o hours inch thick heavyLow duty skin onMARK the mill, electronic computer Set Contact: Email: Mark@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 708 or 702-875-2703 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

LINK** M&F Gauge ............................. 28 Meadows Mill, Inc. ................ 33

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage,

Menominee Saw ..................... 29

sawyers cab, computer controls,

May be sent to­ Bell's Machining ..................... 27 morris@lumbermens.co Carriage Linear & Set Shaft

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

(AIM) ........ 36 Send address changes to: Drives &Buck Tyrone-Berry Carriage PartsEquipment • Headrig Slabbers Lumberman's Exchange Log Turners • Bandmills & Linebar Resaw Systems Corley Mfg .............................. 32 P.O. Box 1916 Board & Gang Edgers • Trimmers Columbia, TN 38402 CRD Metalworks .................... 25

ID: 13851 MorItem bark .....................................

9

AD SUBMISSIONS lewiS

Baker ......................................

ConTrolS opTimizaTion 5, 7 Brute Force Mfg. ..................... 31

Lewis Controls “Electronics for sawmills by sawmillers” POSTMASTER

TheExchange Most Complete Line of Sawmill .............. 17 The Lumberman's is CW Mill-ArmorHog published monthly by Woods Machinery Since 1905!

CW Mill-Hogzilla ................... 15 Publishing, P.O. Box 1916, Columbia, TN 38402. All rights Dyna Products ........................

Single Machine or Complete Turn-Key Operation 35 reserved.

All editorial/ advertorial submissions are used at the More Production & Profit is OnlyHydraulics One Call...................

Away 8 Empire discretion of the publisher and may For Parts, Service & Sales be edited for purposes of clarity Great Lakes Mfg. .................... 34 and space. Although all efforts have Hahn Machinery ...................... 3 been made to ensure accuracy of content submitted by advertisers Hurst Boiler ............................. 14 and writers, the Lumberman's Exchange, its principles and Iron Bull ................................... 21 associates, are not held liable for errors or omissions. Reproduction, Kilgore Saw ............................. 22 in whole or part, is prohibited with­ Lignomat ................................. 24 out written consent. www.corleymfg.com • sales@corleymfg.com ©2017 Woods Publishing

mfg

Call (423) 698-0284 CORLEY

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

M I S C E L L A N E O U S

FOR CLASSIFIEDS Item ID: 1187 Call 30 hp air cooled 4 cylinder wisconsin engine clutch bands need Model 30D10, entire 888.401.MENS operation includes knife grinder, to be replaced has parts work needs to be done there are 4 of 30ft leg dust collector, two cilos, open top trailers, dust them, aux lines, 5' bucket, quick attach, hand and foot controls, See and NY STATE WOODSMEN'S FIELD DAYS collector, blower unit, pictures, and Bagger. Oneprices, owner machine screened cab, late 70's early 80's machine 2667 Fri, 18 August - Sun, 20 AugustContact: AUSTIN Location of all equipment at Contact: MARK Boonville, New York Email: Austin@lumbermensco.com Email: Mark@lumbermensco.com www.LumberMB\ISmagazine.com Phone: 888-401-6367 EXT 703 OR 931-797-8029 Phone: 888-401-6367 EXT 708 OR 702-875-2703 Item ID: 14271

‘03 John Deere Midwest Sharpening.............. 26 748GIII • Material handling fans Contact: 500 to 58,500Sam CFM Multitek ...................................

12 • Pulse(888) Jet Baghouse Filters Ph: 401-6367 x702 (round & square) Piper's Saw Shop.................... 13 • Centrifugal Cyclone collectors 36 models Rotochopper ............................

40 • Overhead Dust Storage Bins (round & square) Row ............................

• Electric Flex-tip Rotary Airlocks -5 models 20 • 8’-13’ Dia Storage Silos Sawmill Exchange .................. 11 • Flanged welded pipe and elbows Select 19 • 26Sawmill to 16Ga galv.......................... lock seam pipe & elbows • Sgl, Dbl & Triple trailor loadout systems Smith Sawmill ........................... 4

The Paul Bunyan Show ......... 39 Thomas Industrial Controls..... 10 Union Grove Saw & Knife.. 2, 37

‘89 Cat D4H LGP Item ID: 13999

carriage knees,Austin husk including Contact:

48" Ph: bottom saw401-6367 and 36" topx703 saw (888)

STACKING RAC ‘04 Hood Loader 28000

Item ID: 13971 Contact: Austin Ph: (888) 401-6367 x703

Universal Refiner ................... 23

 2004 John Deere

4200 S 900 W................................

• Topeka, IN 46571 www.honeyvillemetal.com hours, 36” pads. It does have some www.BakerProducts.net WoodMizer l Phone (800) 593-8377 • Fax (260) 593-2486 800.S48.6914 I S73.663.7711 648G III small leaks. Owner is going back

Item ID: 13878

 SELL YOUR EQUIPMENT TODAY TODAY  24/7 SUPPORT l§ 0 SUPPORT Contact:❘ Austin

Ph: (888) 401-6367 x703

tired cutters because ❘ to  rubber (888) 401-MENS NO. 37his L! 401-MENS job has changed. Item ID 13898.

Sam x702

“Precision Under Pressure”

A D D I R EC TO RY

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Air Systems Mfg..................................... 11.................................... 828-757-3500 Anson........................................................ 2...................................... 800-663-7723 B & B Mfg................................................ 10.................................... 800-654-5320 B. H. Payne.............................................. 8...................................... 404-761-8711 Baker......................................................... 6, 11............................... 800-548-6914 Bartlett Saw Service & Supply............. 19.................................... 800-566-0319 Bell's Machining..................................... 10.................................... 888-995-1965 ‘16Jones Halverson H140 3......................................

Item ID: 14077 800-241-8983 Ben Machinery............................

Contact: Austin Buck Equipment (AIM). ......................... 33........................... ......... 800-803-3365 Skidsteer (DEMO) Ph: (888) 401-6367 x703 Built-Rite Mfg.........................................

21. . ..................................

800-757-2520 Item ID: JW-909632 Claussen All-Mark, Inc..........................

11........................... . ........

800-252-2736 Contact: J Williams Corley Mfg...............................................

37.................................... 423-698-0284 Ph: (888) 401-6367 x701 CRD Metalworks.................................... 4...................................... 888-667-8580 F&R Manufacturing............................... 14.................................... 800-355-1250 Forest Tool............................................... 6...................................... 800-633-4717 Fully Equipped Leasing......................... 27.................................... 503-679-7370 Go-Fast Mfg............................................ 27.................................... 800-854-7439 Great Lakes Mfg..................................... 8...................................... 877-248-5677 Great Lakes Timber Expo..................... 9...................................... 715-282-5828 Honeyville Metal, Inc............................ 37.................................... 800-593-8377 Hurst Boiler............................................. 23.................................... 877-774-8778 Industrial Seating, Inc............................ 29....................................

Item ID: 13920 800-346-2839 Kilgore Saw.............................................. 29........................... ......... 888-857-5153 Contact: Austin ‘13 KMC 2500 Track Klug Korners........................................... 13........................... . ........ 800-471-5060 Ph: (888) 401-6367 x703 Skidder Lignomat..................................................

31.................................... 800-227-2105 LogMax. ....................................................

1...................................... 360-699-7300 Item ID: 14078 Menominee Saw............................ . ........

13........................... ......... 800-582-0470 Contact: Austin capacity!. Item ID 13421. Sam x702 Mid-South Forestry Equip.

Show.......

25. . ............ www.midsouthforestry.org Ph: (888) 401-6367 x703 BARKO Midwest Sharpening ............................ 35........................... ......... 231-924-5953 Multitek.................................................... 12........................... .........

800-243-5438 1994 Barko 160B - Electric Northeast Implement, Inc. ..................

13........................... . ........

607-589-6160 knuckleboom, 30' boom, 75hp off onto a conveyor. This is a very Pantron Automation, Inc. .................... 38.................................... 800-211-9468 motor, Rotobec continuous well built processor. Item ID 13820.

Paul Bunyan Show................................. 15.....................................888-38-TREES grapple, 5,000 original hours.

Sam x702 Piper’s Saw Shop.................................... 7...................................... 800-845-6075 condition.).

Item ID Firewood Processor - This is Prolenc Mfg., Inc....................................

40.(excellent ...................................

877-563-8899

‘93 Barko 180B

‘95 John Deere C6 Tree Farmer

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

,-soo-211-94&8 ‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

PLEASE PRINT

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot 377  Issue 364

AUGUST 2018

amp gauges. Cuts logs up to 16”.

kohing head. head works great.

new for $32,500. Item ID 13865.

approximately 1500 hours. Hour

If you need to Change your Address or

Item ID 13185. Sam x702then OneAdd owner Your and comes with all to our Name mailing list, 1999 Barko 160D new engine manuals and receipts.

Purchased please complete this form and mail to: with

- Small manufacturer in PA has

Lumbermens Magazine dont work. The last 2 owners Sam x702 P.O. Boxmeter 1916 have only used it to load trucks or LOGGING EQUIPMENT Columbia, TN 38402

Handles logs up to 32”. Uses

❑ Bandit Please ❑ Disc Please Change Please Remove delimber,❑ grapple has been rebuilt.

1999 1900Add Tracked

Best Value Portable Log Splitter made the best valued log splitter.

13HP Honda motor. Manual start

• Through-beam range u1p to 230 feet vans and produce 6 - 8 loads per but electronic option is available.

• Waterproof -Has IP67 rated day. Item ID 13882. Austin x703 Log Lift. Uses 4-way wedge Not affected adjustable by vibration EDGERS &• GANGS to single two way. Great • 60k LUX Immunity toPA.sunlight Brewco Saws - Two Brewco Saws Value!

Item ID 12062. Sam x702 in excellent condition. Runs great.

Electric............................................

35........................... ......... 800-248-4479 13238. Chris x700 aRow Chomper Model 16 PDA Select Sawmill................................ . ........

14...........................

613-673-1267 1995 Barko 775.........

B Feller Buncher automatice firewood processor Tajfun........................................................ 17..........................888-401-6367 x703 - Pumps recently redone. 400 hrs with John Deere power unit with TraxPlus ................................................... 39.................................... 601-635-5543 on injection pump. always started low hours. Control panel includes Woodlandia............................................. 31, 33............................. 877-508-8777 good. in good working order. 22in tach, oil pressure, water temp and

Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens  since 1986

❘

BANDIT

as a backup as needed. Has a CTR

*Company name and address process have your change.

Boomto cylinders minor leaks.

Chipper - Cat Under Carriage at required Company Name*:_ Item ID 13694. Sam x702 50% or better.

475________________________________________________________ hp Cummins

94 Barko 275 - Excellent value Diesel.

7500 Hours. One owner.

Individual Name:__________________________________________________________ with low at hours at 3,500. 5.9 Well maintained.

Item ID 13294.

Address:_ ________________________________________________________________ Sam x702

CUMMINS continuous grapple.

_______________________________________________________________________

2004 Bandit Beast Model 4680 -

Runs Great!. Item ID 13740. Sam

City:____________________________________________________________________

3412 Caterpillar Diesel engine

x702

BELL

State:___________________________________________________________________

with 850 HP. 5300 hrs. Mill in

good condition. Just finished 10

1990 Bell Super T - This Bell has

Zip:_____________________________________________________________________

Phone:__________________________________________________________________ a brand new Duetz engine. Lever Acre clearing job, ready to work!

control, 33” bar, pump and tranny Remote control. Big production Email:___________________________________________________________________

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

NEW BARKO 495B

2014 TIGERCAT 234

2013 CAT D6K2

2011 DEERE 843K

2007 JOHN DEERE 843J

2010 TIGERCAT 720E

2013 CAT 525C

2014 JOHN DEERE 753J

2014 TIGERCAT 630E

2013 JOHN DEERE 643K

2013 JOHN DEERE 648H

2014 TIGERCAT 620E

2018 DELFAB DF703

2017 BARKO 595B

2014 TIGERCAT 620E

2014 TIGERCAT 720E

JEWELL CARRIER

2017 BARKO 930B

2013 TIGERCAT 724E

2015 JOHN DEERE 643L

2013 TIGERCAT 726E