Lumbermens October 2018 Magazine

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot 379  Issue 364

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

Industry's**Most Trusted Source CALENDAR** NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

MID-ATLANTIC

LOGGING & BIOMASS EXPO

NEW

MARKETING DIRECTOR

John Williams Sling Sorter – 39 bay, 16’ (888) 401-6367 ext. 701

KentuckyWoodExpo.aspx

Donna Heninger

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

May be sent to­ morris@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

feet a minute also has CLT presses.

Item ID 13876. Austin x703

BM & M S &High W 125Volume Band MillScreen with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

pressure guides. Top Casting wheel

in ve1y good condition, Cuts 130

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

it includes two sets of Mcdonough

is an extremely accurate machine

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR

AD SUBMISSIONS

Lexington, Kentucky

that go up and down, with airbags,

is supported on both sides. This

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

Precision 58”http://www.kfia.org/ HD Chipper

j@lumbermens.co

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

10 hours on this machine since it

machine, with air strain conveyers

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing

MAILING ADDRESS ARMSTRONG Bandsaw

Danckaert Band Resaw - Roughly has been rebuilt, it has a 24foot in

Escanaba, Michigan

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

BANDMILLS & HEADSAWS

feed deck 20 foot out feed deck 72ND ANNUAL GREAT LAKES with 44 inch wheels, and all the LOGGING & HEAVY EQUIPMENT EXPO BREWER 6-Head Pallet Board its Stacker Thurs, 7Resaw Sept - Sat, 9 Sept PENDUbells and whistles, a production

Since 1986, Lumbermens has 2-Saw Trimmer publishedHMC a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal

Carriage line it includes Sharpener PRECISION Scragg MORBARK Log Troughcarriage B & B Mfg. ............................... 18 M&F Gauge ............................. 28

with onboard log turners, carriage

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

MELLOTT Vibrating Conveyor

MELLOTT Slab Drag

The Lumberman's Exchange is CW Mill-ArmorHog .............. 17 published monthly by Woods CW Mill-Hogzilla ................... 15 Publishing, P.O. Box 1916, Columbia, TN 38402. All rights Dyna Products ........................ 35 reserved. All editorial/ advertorial submissions are used at the Empire Hydraulics ................... 8 discretion of the publisher and may be edited for purposes of clarity Great Lakes Mfg. .................... 34 and space. Although all efforts have Hahn Machinery ...................... 3 been made to ensure accuracy of Industry's Most Trusted Source content submitted by advertisers Hurst Boiler ............................. 14 and writers, the Lumberman's Exchange, its principles and Iron Bull ................................... 21 associates, are not held liable for errors or omissions. Reproduction, Kilgore Saw ............................. 22 in whole or part, is prohibited with­ Lignomat ................................. 24 out written consent. ©2017 Woods Publishing

drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

REFORM Knife Sharpener

Rotochopper............................ 40

Row Electric ............................ 20

800-241-8983 Sawmill Exchange .................. 11

Select Sawmill ......................... 19

Ken Dickert, President

Smith Sawmill ........................... 4

Eric Doss 706-478-1581 Jim Lichucki 706-478-5498 Thomas Industrial Controls..... 10 Wes UnionDickert Grove Saw706-478-5893 & Knife.. 2, 37 The Paul Bunyan Show ......... 39

sales@benjones.com Universal Refiner ................... 23

** Financing Available **

WoodMizer ................................ l

www.BakerProducts.net

Don't See What You're Looking for Here? Search Our Complete Inventory at www.benjones.com 800.S48.6914 I S73.663.7711

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 3

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot 379  Issue 364

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 5

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO)

‘93 Barko 180B Item ID: 14077

FREE EQUIPMENT LISTINGS, CALL (888) Contact: 401-MENS Austin BANDMILLS & HEADSAWS

1988

DANCKAERT BAND RESAW Roughly 10 hours on this machine since it has been 2018 rebuilt, it has a 24 foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production C-channel grooves for banding strap positioning machine, with air strain Four steel heavy-duty casters conveyers that go up and down, Center-point shaft with thrust bearing to provide easy rotation with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in very good condition, Cuts 13428 Victory Ln. // PO Box 124 130 feet a minute also has CLT Adams Center, NY 13606 presses.

Item ID 13876. Austin x703

800.548.6914 573.663.7711

bakerproducts.net like us on

STACKING RACK

Item ID: JW-909632 CARRIAGES & DRIVES Contact: J Williams 2010 401-6367 CARDINAL HD Ph: (888) x701 CARRIAGE CARRIAGES Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including 48” bottom saw and 36” top saw, short pop-up transfer to edger, belted rollcase to clear slabs and cuts from stop and loader ‘13 sawline, KMC log 2500 Track to drop logs onto carriage, heavy Skidder duty log turner under log stop and loader to deal with big logs onto Item ID: 14078 carriage andAustin track and frame.

Contact: Item ID 401-6367 13198. Sam x702 Ph: (888) x703 CHIPPERS

PRECISION 58 CHIP PAC off ontochute a conveyor.

This is a very Single loading system.

12764. Item SamID x702 wellItem builtID processor.

13820.

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot 379  Issue 364

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

13HP Honda motor. Manual start but electronic option is available.

Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens  since 1986

❘

1994 Barko 160B - Electric

MEC30'12boom, X 4275hp knuckleboom,

2006 WOODMIZER Firewood Processor - This LT300 is

TRIPLE PASS DRUM DRYER 12 x 42 Mec triple pass Drum grapple, 5,000 original hours.

Dryer, comes with trunnions. (excellent Item ID Item IDcondition.).

13924. Austin x703

automatice firewood processor

1995 Barko 775 B Feller Buncher

COMPLETE SAWMILLS Sam x702

‘05 Gehl CTL 70

Ph: (888) 401-6367 x703 and includes the sawmill, and cab. An incline conveyers, a transfer table and two sets of roller tables. This mill saws a million board feet or more of walnut every year. Max log diameter 36in, Max Width of cut 25in, The width of the band is 1 1/2 ‘95 John C6 Inches.

VideoDeere of it operating isTree available, and can be sent Farmer upon request.

Item ID:13892.

13920Austin x703 Item ID Contact:DRY Austin KILNS Ph: (888) 401-6367 x703 MEC 12 X 38 TRIPLE PASS DRUM DRYER Comes with trunnions, drum capacity!.

13421. Sam x702 drive, fanItem andID cyclone.

BARKO Item ID 13925.

Austin x703

This mill is currently running,

a Chomper Model 16 PDA

motor, Rotobec continuous

13238. Chris x700

INDUSTRY NEWS

with John Deere power unit with

- Pumps recently redone. 400 hrs

DYNA Products moves headquarters on injection pump. always started low hours. Control panel includes good. in good working order. 22in tach, pressure, water temp and to oil Millington Michigan

DYNA Products, theupparent ofhead.

DYNA Rentals leading kohing head worksagreat. amp gauges.

Cuts logs to 16”. company manufacturer of firewood processing equipment has chosen MillingItem ID 13185. Sam x702 One owner and comes with all ton, Michigan for it’s company headquarters. The existing location in 1999 Barko 160D sales, - new engine with manuals and receipts.

Purchased Evart Michigan will remain open for service, rentals, and limited production while theIDmajority will reside in Millington. approximately 1500 hours.

Hour new for $32,500.

Item 13865. of operations “This move will not affect any of the existing rental centers including meter dont work. The last 2 owners Sam x702 those whose fleets include DYNA processors such as the MaCallister haveMiller, only used to load trucks or LOGGING EQUIPMENT Rental Stores in Michigan,” says Nathan the itmanaging partner of the company. as a backup as needed. Has a CTR BANDIT Millington is conveniently situated off I-75, a heavily traveled route delimber, grapple has been rebuilt.

1999 Bandit 1900 Tracked Disc improving logistics dramatically. This route reduces total travel time Boom cylinders have minor leaks.

Chipper - Cat Under Carriage by several hundred miles foratthe majority of DYNA’s customer base.

The new location also provides convenient facilities for rail transport Item ID 13694. Sam x702 50% or better. 475 hp Cummins to supply product to DYNA’s west coast warehouse.

94 Barko 275 - Excellent value Diesel. 7500 Hours. One owner.

While the move presents its challenges, the DYNA team is commitlow and at hours at 3,500.customer 5.9 Well maintained.

Item ID potential 13294. ted and enthused with forwith growth improved service and support for both the firewood processor rental grapple. clients and CUMMINS continuous Sam x702 processor owners according to Miller Daily parts orders will be proRuns Great!. Item ID 13740. Sam 2004 Bandit Beast Model 4680 cessed and shipped from both Millington and Evart locations. The bigx702 3412 Caterpillar Diesel engine ger 37,000 square foot facility in Millington presents opportunity for doing850 more operations opposed to subcontracting as well.

BELL with HP. 5300 hrs. Millin-house in This will translate into better control, responsiveness and shorter lead 1990 Bell Super T - This Bell has good condition. Just finished 10 times. brand new Duetz engine.

Lever Acre clearing job, ready to work!

“We are excited with the changesaand look forward to serving our clients better,” concluded, “Thecontrol, future33” looks promising.” bar,very pump and tranny Remote control. Miller Big production For more information go to www.dyna-products.com.

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 7

40

used

ra

02

00

t

02

r

y

wer

w

ill

DYNAMIC CHIPPERS

Phone FIREWOOD PROCESSORS 315.284.4126 2004 JCB 441 WHEEL LOADER Fax 2010 SHOP BUILT 3,509 hours on this machine, 315.849.2045WOOD PROCESSOR everything works as it should.Website It has a 353 Detroit diesel, 40 inch www.empirehyd.com I have many videos available Email insert tooth circle saw, 30 foot “Precision Under Pressure” of it running, and can be info@empirehyd.com sent chain conveyer, 8 way splitter, on

upon request.

Item ID 13888. Austin x703

20,000lb goose neck trailer.

Item ID 13916. Austin x703

2008 DYNAMIC 585 CHIPPER This is a 2008 dynamic cone head chipper with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design.

Can easily load 42’ vans and produce 6 - 8 loads per day.

Item ID 13882. Austin x703

FIREWOOD PROCESSOR This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit.

Has a 4’ chain saw that kicks off onto a conveyor. This is a very well built processor.

Item ID 13820. Sam x702

PIPER’S Saw Shop

FIREWOOD PROCESSOR This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges.

Cuts logs up to 16”. One owner and comes with all manuals and ‘16 Halverson receipts.

Purchased H140 new for $32,500.

Skidsteer (DEMO) ItemID: IDJW-909632 13865. Sam x702 Item LOGGING EQUIPMENT Contact: J Williams BANDIT x701 Ph: (888) 401-6367 2004 BANDIT BEAST MODEL 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre

a Chomper Model 16 PDA

2006 Chris CASEx700 440 SKID LOADER 13238.

5 7 0 6 • 5 4 8 • 800

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Firewood Processor - This is

Simonds Red Streak Hard Back ‘05 Gehl CTL 70 1-1/4” x .042 x 3/4” or 7/8” Item ID: JW-986495 L im it e d Length 13’2” Contact: J Williams

im e Ph: (888) 401-6367Tx701

‘83 John Deere 4850 Tell us you saw it here!

$14.71 $14.27 each

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot

O n ly

CASE Item ID (excellent condition.).

tach, oil pressure, water temp and

With only 871 hours, this machine starts, runs, and operates like new. I - Pumps recently redone. 400 hrs have many videos available and can on injection always started be sent uponpump. request.

IteminID 13886.

Austin x703 good. good working order.

22in

One owner and comes with all

Item ID 13185. Sam x702

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes amp gauges. Cuts logs up to 16”.

1995 Barko 775 B Feller Buncher

kohing head. head works great.

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

99’ CASE 850G LONG TRACK DOZER One owner machine, only 3300 1999 Barko 160D - new engine with original hours, has never been approximately 1500ithours.

Hour on used in the woods, has a ripper the back, pads,last and chains, meter dontoriginal work. The 2 owners Underonly carriage have used itistonew loadalong truckswith or new rollers on the bottom, and new as a backup as needed. Has a CTR sprockets. delimber, grapple has been rebuilt.

Item ID 13909. Austin x703

but electronic option is available.

50% or better. 475 hp Cummins

Item1994 ID 13694.

Sam x702 320 CATERPILLAR

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

good condition. Just finished 10

Acre clearing job, ready to work!

Remote control. Big production

379 Lumbermens  Issue 364 ❘ - Cat List exchange it buy  to save arch with winch.

Low hours on  since Cat 1986 D5B Dozer D5B s/n seLL  come hook up to and go your this skidder at only 3700. These

1994 BARKO 160B Electric knuckleboom, 30’ boom, 75hp motor, Rotobec continuous grapple, 5,000 origi‘93 Barko 180B nal hours. (excellent condition).

Item ID: 14077 Item ID 13238. Chris x700 Contact: Austin BELL Ph: (888) 401-6367 x703 1990 BELL SUPER T This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny has been rebuilt not long ago. Hour meter is inop. New paint.

Runs perfect. Has heat and air, it just needs to be fixed.

Item ID 13896. Sam x702

Sam x702

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

Promotional Pricing Offer

BARKO

BELL SUPER T ‘951993 John Deere C6 Good running condition. 33” Tree Farmer Bar Saw. Tires at 50%. Deutz Item ID: 13920 engine.

Hour meter broken.

Contact: Austin Sam x702 Item ID 13543.

Ph: (888) 401-6367 x703 BELL TREE CUTTER Around 1000 hours on the machine.Item NewIDair cooled capacity!.

13421.

Sammotor x702 only about BARKO 300 hours. Rebuilt dangling head. Several bars 1994 Barko 160B - Electric and chains. Machine came off knuckleboom, 30' boom, 75hp the job in February and is field motor, Rotobec continuous ready.

Item ID 13943.

Austin x703 grapple, 5,000 original hours.

‘13 KMC 2500 Track Skidder

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

clearing job, ready to work! Remote control. Big production capacity!

Item ID 13421. Sam x702

22X380, direct drive, EROPS,

job site and put it to work to up

Boom cylinders have minor leaks.

CATERPILLAR

94 275 - Excellent DryBarko machine that isvalue in good

condition forhours the year.

The stick with low at at 3,500.

5.9 and bucket cylinder have been repacked.

CUMMINS continuous grapple.

It has a thumb and bucket on it, also has a 230 Waratah processing x702 head that can be sold with it.

BELL19k, motor has Hours are around been replaced a yearshas back.

1990 Bell Super Tcouple - This Bell Machine is working daily. a brand new Duetz engine. Lever Item ID 13936. Austin x703 Runs Great!. Item ID 13740. Sam

control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

FORFrom CLASSIFIEDS When You Buy Your Circular Saws B.H. Payne Call 888.401.MENS You’ve Bought the best... We Guarantee It!

See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at Traditional Quality Combined Boonville, New York With www.starwebhosting.net/woodsmen/ Quality Brand

Call 800 752-0627

BANDMILLS & HEADSAWS Circular Saws SOUTHWEST FOREST PRODUCTS EXPO Make Sure To Ask For Our Free,Band Complete Saw -Catalog Saw Bits and Shanks Danckaert Resaw Roughly Fri, 25 August - Sat, 26 August Circular Knives Reg. U.S. Pat Off

The Tree that Started it All!

We Manufacture & Sell Tooth Headsaws, Solid Tooth 10 Inserted hours on this machine since it Hot Springs, Arkansas Carbide Tipped Saws Saws, Inserted Tooth Cutoff Saws & Carbide Saws.

We also www.arkloggers.com Carbide Strobe ® Saws has been rebuilt, it has a 24foot in B.H. Payne & Company Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels, feed deck 20 foot out feed deck Saw Manufacturers 72ND ANNUAL GREAT LAKES Knife Grinding Wheels, Saw Gumming Wheels & Knives.

PUBLISHER

Woods Publishing MID-ATLANTIC

ADVERTISING SALES

LOGGING & BIOMASS EXPO

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR John Williams (888) 401-6367 ext. 701 j@lumbermens.co

• Saws manufactured Quality Nickel Alloy Steel.

Escanaba, Michiganfrom only the Highest machine, with air strain conveyers • Each Saw Milled with State-Of-The-Art Precision CNC Milling Machine. that go up and down, with airbags, • We Tension Your & Saw to Your RPM Speed BEFORE Leaving Our Factory.

MID-ATLANTIC LOGGING BIOMASS it includes two sets of Mcdonough Completely Guaranteed.

Fri, 15• Your SeptSatisfaction - Sat, 16- Sept pressure guides. Top Casting wheel Selma, North Carolina www.midatlantic-logging-biomass­ is supported on both sides. This B.H. Payne & Company, Inc. expo.com/ is an extremely accurate machine

P.O. Box 90608 KENTUCKY WOOD EXPO East Point, GA 30364 Fri, 15404 Sept - Sat, 16 Sept 761-8711 Lexington, Kentucky Fax 404 761-5398 http://www.kfia.org/ KentuckyWoodExpo.aspx

“Since 1890” THE PAUL BUNYAN SHOW Fri,E-mail: 6 Oct -info@paynesaws.com Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

CUT TO LENGTH **while INFO LINK** CUTTING TIME & LABOR AW OPS

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS POSTMASTER

AM

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

. CH A I ”D

26

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Web Site: www.paynesaws.com Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434.

Ite Co Ph

Carriages (Sawmill) - Cardinal Carriage line it includes carriage

John Deere 440B

ItemDetector's ID: 14048 Metal Inc. .............. 30

cabinet with electronic drives for

CRD Metalworks .................... 25 CW Mill-ArmorHog .............. 17

Multitek ................................... 12 rings for wet weather. Item ID Piper's Saw Shop.................... 13 13851. Sam x702 Rotochopper ............................

2004 648GIII John Deere duel 40

Itemhyd ID: pac 14064 drive, for carriage, Contact: Austin sawyers cab, computer controls, Ph: (888) 401-6367 x703

Air-activated or carriage knees, husk including manual operated, 48" bottom saw and at 36"75%. top 9400 saw disc.

Undercarriage cut lumber to length. hours. Item ID 13796. Sam x702

STACKING RAC

2005 John Deere 903G Feller

Buncher - GN Roy 22’’ continuous

saw head. Heated & A/C cab.

Cut lumber into multiple CW Mill-Hogzilla ................... 15 Row Electric ............................

Standard arch skidder.

- Slick Machine. shorter 20 pieces, set at either boom. Medium pads.

Operator, Runs good motor is in top notch Dyna Products ........................ 35 Sawmill Exchange .................. equal or11various distances service, and parts books Sam x702 condition.

Item.........................

ID 13610.

Sam x702 from each other. included. Item ID 13203.

573.663.7711 Empire Hydraulics ................... 8 Select Sawmill 19 2006 JD 2554 Processor800.548.6914 with 624 2004 John Deere 648GIII - This Great Lakes Mfg. .................... 34 Smith Sawmill ........................... 4 Waratah ‘Super’ Processing Head. machine has 13000 total hours on bakerproducts.net Hahn Machinery ...................... 3 The Paul Bunyan Show ......... 39 10500 hours.info@bakerproducts.net New pumps. New the body, with only 3000 hours on Hurst Boiler ............................. 14Combines Thomas Industrial Controls 10 engine. New drive motors on the new motor, comes with..... a set a multi-trim Iron Bull ................................... 21andUnion Grove Saw & Knife ..

2, 37 aofselect-cut to give head. Almost new rails. New front chains, working daily. Item ID both high production window. Super tight machine.

13878.

Austin x703................... 23 Kilgore Saw ............................. 22youUniversal Refiner and versatility.

Runs great. One owner!. Item ID 2004 John Deere 853G - This track www.BakerProducts.net Lignomat ................................. 24 WoodMizer ................................ l

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

cutter is in excellent condition with

new 30” pads, batteries and  SELL YOUR EQUIPMENT TODAY ❘ pump,  24/7 SUPPORT l§ TODAY 0 SUPPORT  Issue 364

Com

engi

Bell's Machining ..................... 27

Corley Mfg .............................. 32

War

2010 Cardinal HD Carriage

CARRIAGES & DRIVES

Baker ...................................... 5, 7

Morbark ..................................... 9

Ite Co Ph

1050

with onboard log turners, carriage

Contact: Austin Midwest Sharpening.............. 26 Ph: (888) 401-6367 x703

‘0 Tr Lo

Sam x702

‘04 Komatsu WA500-3LK Menominee Saw ..................... 29

SAW G Brute Force AN Mfg. ..................... 31 G Buck RIMEquipment (AIM) ........ 36 BI-T

May be sent to­ morris@lumbermens.co

CT W E L I-SE OFF SA T L MU CUT

‘1

with 44 inch wheels, and all the LOGGING & HEAVY EQUIPMENT EXPO What You Get With Every B.H. Payne Saw Thurs,Here’s 7 Sept - Sat, 9 Sept bells and whistles, its a production

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

www.LumberMB\ISmagazine.com Todays Technology

800.S48.6914 13550.

Sam x702I S73.663.7711

2554 Processor withNO. 9 ❘ 2006  JD (888) 401-MENS L! 401-MENS

Lumbermens  since 1986

❘

and

driv

Alm

UC.

tigh

x702

2006

wor

and

and

hou

2006

hou

1388

2006

skid

supp

read

now

hou

and

good

little

1393

2006

 List  seLL  exch

3

3

e. Just

r PT

ling

nch.

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

1994 CATERPILLAR D4 HI TRACK WITH GRAPPLE This is an extremely low hour dozer/ skidder with only 2800 actual hours.

Comes with new 30” pads and chain.

Undercarriage is still in excellent shape. Fixed grapple and no winch.

Item ID 13932. Sam x702

‘16 CAT Halverson H140 1996 214 MOBILE EXCAVATOR with 36’ magnet 3 tons steel Skidsteer (DEMO) shear. low hrs!

All Item ID: JW-909632hard tires, 4Contact: outriggers ideal for scrap J Williams business.

It also has 48’ swavel Ph: (888) 401-6367 x701 bucket for street ditch clean up.

Item ID 13441. Sam x702

Every Reputable Wide Band Supplier Offers

3 High Quality Swedish Steel 3 3” – 8” Band Width 13428 Victory Ln. Gage // PO Box 124 3 16 to 20 Adams Center, NYOptions 13606 3 Double Cut 3 Choice of Swage or Stellite

WOLVERINE

BUT ONLY THE

BY MENOMINEE SAW GUARANTEES • Cutting Edge Plasma Welds Gehl 70 • The Industry’s Highest‘05 Band SawCTL Capacity Item ID: JW-986495 • Quick Delivery from our HUGE Inventory Contact: J Williams Ph: (888)Program 401-6367 x701 Fast Sharpening & Exchange ‘83 •John Deere to Keep YOU Running 4850 • Competitive Pricing chain conveyer, 8 way splitter, on Item ID: 14073

20,000lb goose neck trailer. Item ID

Contact: Austin And ONLY Menominee Gives You Everything 13916. Austin x703 Ph: (888) 401-6367 x703

You need in a WideBest Band – Plus ValueSaw Portable Log Splitter Expert Service from the Industry’s with 1700 hours, in very good - Small manufacturerMost in PA has Knowledgeable Staff. condition. Easily produces high made the best valued log splitter. quality chips with patented ‘Cone’

Handles logs up to 32”. Uses

Got a Wide Band Problem? drum design. Can easily load 42’ 13HP Honda motor. Manual start Call Menominee Saw Today and You’ll vans and produce 6 - 8 loads per but electronic option is available.

Learn Why More Mills Trust the Pro! day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge EDGERS & GANGS

adjustable to single two way. Great

TOLL FREE in excellent condition. Runs great.

Firewood Processor - This is a 1-800-582-0470 Item ID 13644. Sam x702 homemade processor with a 10’ Brewco Saws - Two Brewco Saws

Value! PA. Item ID 12062. Sam x702

16th St., Menominee, MIa 49858 FIREWOOD900 PROCESSORS log deck. Has hydraulic grapple, Tel: 906-863-2609 Fax: 906-863-1147 2010 Shop Built Wood Processor chain and kicker that all runs off Email: info@menomineesaw.com - It has a 353 Detroit diesel, 40 of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks WWW.MENOMINEESAW.COM

inch insert tooth circle saw, 30 foot

1998 CATERPILLAR 515 Grapple with winch, no heat or air.

Open cab skidder with 9800 hours.

Tires are 28L’s, rear 90% and fronts are 30% with new bear paws chains.

Item ID 13801. Sam x702

Skidder - Very good running

CLARK

2005 CATERPILLAR 525B ‘13 KMC 2500 Track This is a dual arch skidder with Skidder winch.

Very low hour skidder with 7900 frame hours and Item ID: 14078 only 63 hours on a new engine.

Contact: Austin Continuous grapple, tires are Ph: (888) 401-6367 x703 30.5’s @ 70%. This is a really nice skidder for the price.

ItemaID 13816.This Samisx702 off onto conveyor. a very

CLARK RANGER 665D Tight and dry machine, rebuilt motor. hour meter broken, ‘95 John Deere C6 It has a 353 Detroit, with grapple, Tree Farmer and winch, always fires right up, andID: runs with no issues.

Item 13920 Item ID 13748.

Contact: AustinAustin x703 Ph: (888) 401-6367 x703 EARLY 70’S CLARK 664 CABLE SKIDDER some center slack, needs front capacity!. Item ID 13421.

Sam x702 tires, comes with a spare tire.

BARKO Gearmatic 19 winch doesn’t hold 1994 Barko 160B - Electric good. 453 Detroit power unit. knuckleboom, 30' boom, Item ID 13629.

Sam75hp x702

Sam x702

grapple, 5,000 original hours.

well built processor. Item ID 13820.

Firewood Processor - This is a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

379 Issue 364 1986 ❘ 630C Grapple  List  seLL  exchange  buy  save Model roatation on theLumbermens grapple w/ a  since 2006 Tigercat

30’ reach on the boom. Joystick

2007 CATERPILLAR D6N LGP DOZER ENCLOSED CAB Overall: Cab Heat & AC, 150HP Cat C6.6L, 90% Undercarriage, GPS Ready, Sweeps & Rear Screen, 13’6” PAT Blade, 39,500 LBS, Hours: 7,867 Horsepower: 150 S/N: ‘93 Barko 180B ALY03028.

Item ItemID: ID 14077 13567. Chris x700 Contact: Austin Ph: (888) 401-6367 2000 CAT 515 GRAPPLEx703 SKIDDER One Owner Runs great! Is it an excellent condition. Rubber is around 75% Has new Hydraulic pump and Charge pump.

Item ID 13616. Sam x702

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan ‘05 Tigercat 230B

Item LOGGING ID: 13911 & BIOMASS MID-ATLANTIC Contact: Austin Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR John Williams (888) 401-6367 ext. 701 j@lumbermens.co

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS P.O. Box 1916

‘10Columbia, Shop TN Built 38402-1916 (888) 401-6367 Wood Processor AD13916 SUBMISSIONS Item ID: May be sent to­ Contact: Austin morris@lumbermens.co Ph: (888) 401-6367 x703 POSTMASTER

Send address changes to: Lumberman's Exchange Skidder - Very running P.O.good Box 1916 Columbia, TN 38402 condition.

Big Capacity Grapple!

9400 hours. Tires at 40%. Totally The Lumberman's Exchange is

published monthly Woodswho gone through

by TPbyDealer

Publishing, P.O. Box 1916, did the following: Repacked Columbia, TN 38402.

All rightsand reserved.hydraulic All editorial/ advertorial resealed cylinders – submissions are used at the grapple arch, steering; Replaced discretion of the publisher and may be edited for purposes of hydraulic hoses and linesclarity where and space. Although all efforts have needed – fill pump, grapple, etc; been made to ensure accuracy of content submitted by advertisers Repacked hydraulic fill pump; and writers, the Lumberman's Replaced Replaced Exchange,exhaust; its principles and center associates, are not held for pins; Straightened andliable painted errors or omissions. Reproduction, panels; Changed allprohibited fluids and in whole or part, is with­ out written consent. filters; Re-insulated cab; Checked ©2017 Woods Publishing

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Ph: (888) Selma, North401-6367 Carolina x703 www.midatlantic-logging-biomass­ expo.com/

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

‘99 Hydro-Ax

THE PAUL BUNYAN SHOW Fri,511EX 6 Oct - Sun, 8 Oct

Cambridge, Ohio Item ID: 13799 www.ohioforest.org Contact: Sam Ph: (888) 401-6367 x702

** INFO LINK**

Runs great. Has worked double

‘98 611 Ex-Hydro B. H. Payne .............................. 16 Ax B & B Mfg. ............................... 18

Baker ...................................... 5, 7

Item ID: 13948 Bell's Machining Contact: Austin..................... 27 Ph: (888) 401-6367 x703 31 Brute Force Mfg. .....................

Buck Equipment (AIM) ........ 36 32 IDCorley 13438.Mfg Sam.............................. x702

2007 TimberPro 810 ....................

Combi CRD Metalworks 25 Machine Forwarder set up but CW Mill-ArmorHog .............. 17 comes with rebuilt Log Max 750 CW Mill-Hogzilla ................... 15 processing head. Less than 5200 Dyna Products ........................ 35 total hours. Runs very well. Has Empire 8 blade andHydraulics plumbed for................... a clam GreatNew Lakes Mfggear . ....................

34 bunk. swing box. Quick

attach 15 min. to switch head to3 HahninMachinery ...................... grapple.

Cummins 6.7 QSB engine.

Hurst Boiler .............................

14

shifts so it has higher hours

at 13,500, but............................. has been well 28 M&F Gauge

maintained.

New last year.

Meadows Mill, IncU/C . ................

33 24” grousers. All pumps rebuilt last Menominee Saw ..................... 29 year. Gull wing engine cover with Metal Detector's Inc. .............. 30 hydraulic lift for easy maintenance.

Midwest Sharpening.............. 26 Rolly II in good condition and Mor bark .....................................

9 computer measures well. Owner Multitek ...................................

12 retiring. Bought new for $540,000!.

Item IDSaw 13362.

Sam x702 Piper's Shop ....................

13 2006 TimberPro 830 COMBI Rotochopper............................ 40

Harvester/Forwarder - Just 5700 Row Electric ............................ 20 hours. Very good condition. Comes Sawmill Exchange .................. 11 with grapple for loading forwarder Select Sawmill .........................

19 and Log Max 7000 processing head Smith Sawmill ...........................

4 for harvesting.

2 sets of tracks for

bogies. up for quick The PaulSet Bunyan Showchange ......... 39 from harvester to grapple.

Thomas Industrial ControlsOne ..... 10

man operation. Log Max head has 260HP. Optional Tracks on all Iron Bull ................................... 21 Union Grove Saw & Knife.. 2, 37 bogies adds $10,000. Item ID 13501. top saw and runs well. Compare to Kilgore Saw ............................. 22 Universal Refiner ................... 23 new machine at $650,000. Item ID Sam x702 Lignomat .................................

24 WoodMizer ................................ l 13439. Sam x702 2010 TimberPro 725B w/Rolly II

PLANERS and fixed wiring as needed. Item Processor - Super Clean Machine.

- USED FORESTRY EQUIPMENT FOR SALE ❘  SELL YOUR EQUIPMENT TODAY ❘  24/7 SUPPORT SALE l§ TODAY 0 SUPPORT  Issue 364 Lumbermens  since 1986 ❘  List  seLL  exchange  buy  save ❘

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

‘97 Prentice 210E machine, with air strain conveyers

Item# 13795 that go up and down, with airbags, Contact: Sam Ph: (888) 401-6367 x702

it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported both-sides.

2006 Logosolon Planer This isThis a 10” is an extremely accurate machine 4 sided planer that has removable in ve1y good condition, Cuts 130 side cutters that will take up to feet a minute also has CLT presses.

12” lumber and includes a blower Item ID 13876. Austin x703 system. Item ID 13428. Sam x702 S & W 125 Band Mill with

POLE & POST PEELERS

Caterpillar generator - Low hours PS8 Post Peeler - This peeler has on the mill, electronic computer Set been converted to electricity over works,1 1/2" or 2" band, 22ft. track hydraulic. Comes with a operators Cat 3406 140KW Genset, 12,400 cab, electric boxes, conveyor and hours ready to run. Item ID 13434. kickers and will peel a 3” post to a Sam x702 7” post. Comes with a barko loader

CARRIAGES & DRIVES

mounted on a truck that has also 2010 Cardinal HD Carriage been converted to electric power.

Carriages (Sawmill) - Cardinal Item ID 13926. Sam x702 Carriage line it includes carriage

PORTABLE SAWMILL

with onboard log turners, carriage 36” Portable Sawmill - Maximum drive, hyd pac for carriage, diameter log- 36” Maximum length sawyers cab, computer controls, of cut-20’6” Powered by a Koehler cabinet with electronic drives for Diesel 9.8HP Blade-1-1/4” by 13’2” carriage knees, husk including long 12 Volt saw-head precision 48" bottom saw and 36" top saw up/down. Item ID 13897. Austin

x703

STACKING RAC

36” Portable Sawmill - Maximum

diameter log-36” Maximum length of cut-20’6” Powered by Koehler gas 19HP Blade 1-1/4” by 13’2”

long 12 Volt saw-head precision up/down 12 Volt Electrical

Forward/Reverse Saw Head

Travel. Item ID 13899. Austin x703 Dixon Sawmill - VERY UNIQUE AND EFFECTIVE MILL! Dixon

52 in bottom blade and 38 in top

blade. It has a four blade vertical www.BakerProducts.net edger diesel powered with a fuel 800.S48.6914 I S73.663.7711 efficient duezt 247hp motor. Item ❘ L!  (888) 401-MENS NO. 11 401-MENS  Lumbermensmagazine.com

JEM

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

IntegrIty • PrecIsIon • QualIty • Value “Precision Under Pressure”

Woodmaster See why we are your BeSt Source for bandsaw blades!

We offer the highest quality welds and our people use the highest level of integrity and precision to give you the best bandsaw blades in the business—we ship all over the US. 2010 JOHN DEERE 1110E 2012 JOHN DEERE 548GIII Satisfaction always guaranteed!

FORWARDER Single arch with winch, blade

Super Clean machine.

8 Wheeled. Only 5800 hours.

One owner and well maintained.

Hard to find them with low hours like this!

Item ID 12947. Sam x702

2010 JOHN DEERE 703J HARVESTER The Tree 9622 Hours.

Owner Mathat One Started chine. Good undercarriage. Reit All! cent boom update. Well maintained.

Runs very well.has Will Since 1986, Lumbermens include service trailer.circular published a monthly Item IDsawmills, 13419. reaching loggers, 13428 Victory Sam Ln. //x702 PO Box

EXPORT LOG DEBARKING LINE Reconditioned 35 Nicholson A-5 debarker, cab, infeed hour glass rolls, log dischage belt with side log kickers. Call 208-4510365 for details. $279,000 JOHN DEERE

‘92 JOHN DEERE 590 DH140 CUTTER ‘16 Halverson Will need pads in the future, sprockets Skidsteer (DEMO) and rails are about 85%, it has a 4cyl Item ID:ItJW-909632 JD motor. has a Rotnee dangle hd.

Contact: Williams w/ a bar sawJand a spare idler.

Ph: (888) 401-6367 x701 Item ID 13612. Chris x700

Wood-Mizer LT40

** CALENDAR**

2014DEERE JOHN 1995 JOHN C6DEERE TREE FARMER 160G EXCAVATOR Item ID: 13995 Only 20 hours on a new 5.9 Cummins extensions, 1 new 28L and 3 @ Low hour excavator with only Contact: Austin engine.

The whole center has been 50%. This is still a new machine 1500 hours. Still a new machine.

WOODSMEN'S FIELD DAYS Ph: (888) 401-6367 with only 3600 hours. NY STATEfixed, Item ID Samx703 x702 and line13841. bolt redone, transmisFri, 18 August - Sun, 20 August Item ID 13780. Sam x702 sion is tight,New center pins are good. It Boonville, York 2014 JOHN DEERE 643K has a full speed tranny, rewww.starwebhosting.net/woodsmen/ There’s not much towith say two about 2012/13 JOHN DEERE this feller buncher.

It’s stilldaily. brand 200D EXCAVATOR verse, with a winch.

Working SOUTHWEST FOREST PRODUCTS EXPO new out the box with only This is still a like new excavator Item ID-of 13920. x703 Fri, 25 August Sat, 26Austin August

thIn Kerf

Band saw Blades

1452 hours. Has a 2000 hour with only 3000 hours. Comes Springs, warranty.

It Arkansas comes mounted on with a stationary rockland Hot www.arkloggers.com 2004 648GIII JOHN DEERE 30.5 tires at 95%.

Comes with a thumb that can be adjusted tower manually. Great buy on this DUELhead.

ARCH 72ND22” ANNUAL GREATSKIDDER LAKES Item ID EQUIPMENT 13864. Sam x702 Deere. Tinted windows LOGGING to help & HEAVY Slick Machine. Runs goodEXPO motor keep the sun and heat out.

Item ID: 14078 Thurs, 7 Sept - Sat, 9 Sept is in top notch condition.

2015 JOHN DEERE 748L Item ID 13856.

Sam x702 124 Escanaba, Michigan Contact: Austin pallet makers, recyclers and This is still a new Sam skidder with Item ID 13610. x702 Adams Center, NY 13606 industrial woodworking plants Ph: (888) 401-6367 x703 by a only 1480 hours.&Owned 2011 JD 748H GRAPPLE 2013 JOHN DEERE 437D MID-ATLANTIC LOGGING BIOMASS worldwide.SKIDDER This loader is still like brand new. company that is no ck Fri, construction 152004 SeptJOHN - Sat, 16 Sept Cheut hours.

648GIII It has been well taken care of with longer needed.DEERE Dual arch, winch, 4600 Good running PUBLISHER O Selma, North Carolina Woods Publishing only 2932 hours. CSI delimber, joystick controls, turn around skidder. 30.5 tires at 60% with This machine has 13000 total hours www.midatlantic-logging-biomass­ MID-ATLANTIC off onto a conveyor.

ThisHD is a very Kodiak, Series 3 hydraulic landing seat, wide blade and axles. dualingADVERTISING rings. Dual arch grapple.

SALES expo.com/ LOGGING & BIOMASS EXPO gear. You will not find another Was bought new in Jan and still Heat/AC. Morris Well maintained.

Woods well built Item ID 13820.

Item ID:processor.

14039 (888) ext. x702 704 loader this clean. has factory warranty Item ID401-6367 13176. Sam KENTUCKY WOOD EXPO and an morris@lumbermens.co Contact: Austin can still be Item ID 13822. Sam x702 Fri, extended Sam x702 - warranty 15 Sept Sat, 16 Sept 2012 JD 544K W/LOG bought for401-6367 this skidder.

Save a MARKETING DIRECTOR Lexington, Kentucky Ph: (888) x703 Firewood Processor - This is used The Go Fast Firewood Wrapper produces better firewood lot of money on this slightly GRAPPLE 2014 JD 753J FELLER BUNCHER John Williams http://www.kfia.org/ (888) 401-6367 ext. 701 Super Clean Machine!

5870FW-16 Firewood skidder over a brand new one.

NEW!Wrapper is bundles for less.

The built with KentuckyWoodExpo.aspx a Chomper Model 16 PDA j@lumbermens.co Item ID x702 13933. Sam x702 hours; Enclosed cab with heat Treat as NEW! Only 381 hours.

13799.

Sam true gear reduction and heavy duty frames, outlasting the firewood processor and A/C; Ride control; Rockland Standard warranty expired, DESIGN DIRECTOR THEautomatice PAUL BUNYAN SHOW safe, and reliable.

1998 HydroSun, Ax 611EX Saw748L Head Donna Heninger DEERE logcompetition. grapple; Tires at Simple, 80%. but has Extended Warranty on Fri, Item ID: JW-986495 62015 Oct 8 Oct with John-JOHN Deere power unit with Item EQUIPMENT ID 13534. Sam x702 This skidder is still smells new Major Components to 2017 or Cambridge, Ohio REPS Feller Buncher - with about 8800 Contact: J Williams low hours. with only Control 1000 panel hoursincludes of use.

3000 hours. Totally loaded with www.ohioforest.org Sam Wall Ph: (888)Has 401-6367 x701 hours. Bunching Saw Head haswith 2012 JD 401-6367 848H DUAL Mounted on 30.5 X 32 tires extras. counterweight/ (888) ext. ARCH 702 oil pressure, water temp and — sam@lumbermens.co THAT'S THE GOFAST running WAY boards. Includes the JD atach, SKIDDER new set of tire chains. Dual largegauges. pocket for accumulation and Only 4200 arch, winch, joystick 22” Hot Saw with 40 degree tilt. amp Cuts logs upcontrols, to 16”.

Austinhours.

Woods Factory warranty until 5000 hours. turnaround seat, wide blade and 36” wide flotation pads. Simply (888) 401-6367 ext. 703 lifting side shield for notching chain conveyer, 8 way splitter, on One owner comes with over all austin@lumbermens.co Great running condition. 35.5 HD axles. and Save on this a perfect condition.

New price Item ID: 14073 larger trees felling.

ItematMAILING ID:60%.

14011 Item ID: 13855 tires Tight and Dry. brand new skidder because this is $445,000.

Savetrailer. $40,000 20,000lb goose neck Item for ID manuals andbefore receipts.

Purchased ADDRESS Contact: Austin Great Value. is stillGauge new. only hours of use!

B &380 B Mfg .Sam ...............................

18 M&F .............................

28 P.O. Box 1916 Contact: Austin Contact: Cummins engine.

28LID tires at 60%.

13916.

Austin x703 Sam x702 new for $32,500.

Item Ph: (888) 401-6367 x703 Item ID 13482.

Sam x702 Item ID 13935.

Sam13865. x702 Item ID 13574.

Columbia, TN 38402-1916

Ask About Our Dismanteling Blades

‘13 KMC 2500 Track Skidder

1-888-857-5153

Our Quality • Our Service • Our Price

‘89 Timberjack 380A

FW-16 Firewood Wrapper ‘05 Gehl CTL 70

Production and Profit Without Compromise — ­ ‘83 Western John Deere ‘06 Star ‘08 John Deere 4850 Michigan Special CT332 Ph: (888) 401-6367 x703 (888) 401-6367 AD SUBMISSIONS

with 1700May hours, very good be in sent to­ morris@lumbermens.co x702 condition. Easily produces high POSTMASTER

2004Send Hydro Ax 470patented - This cutter quality chips with address changes‘Cone’ to: Lumberman's Exchange has around 7000 hours. a clean drum design. Can easilyIt’s load 42’ P.O. Box 1916

Columbia, and tight machine.6TN Only reason vans and produce - 838402 loads per The Lumberman's Exchange isItem selling is due to an upgrade. day.

Item ID 13882.

Austin x703

published monthly by Woods Publishing, P.O. Box 1916, ID 13846. Sam x702 Columbia, TN 38402. All rights reserved.

All editorial/ advertorial 2004 Hydro 670 -Brewco Engine has Brewco SawsAx - Two Saws submissions are used at the discretion of the publisher and may about 500 hours, new saw in excellent condition.

Runsmotor great. be edited for purposes of clarity anddisc space.

Although all efforts have and last year. owner Item ID 13644.

SamPrevious x702 been made to ensure accuracy of content submitted by advertisers had the hydrastats redone. This and writers, the Lumberman's Exchange, its principles and has aShop 22” high capacity head and is 2010 Built Wood Processor associates, are not held liable for errors or omissions. very machine.

Mounted -aIt has clean a 353 DetroitReproduction, diesel, 40 on in whole or part, is prohibited with­ out written consent.

34’s with tread.

Item inch insert50% tooth circle saw,ID3013828. foot ©2017 Woods Publishing

EDGERS & GANGS

FIREWOOD PROCESSORS

** INFO LINK** 1-800-854-7439

Meadows Mill, Inc . ................ 33 WWW.GOFASTMFG.COM Decent running condition. Item ID Sam x702

B. H.(888) Payne ..............................

Ph: 401-6367 x702 16

Best Value Portable Log Splitter

Baker ...................................... 5, 7

- Small in PA has 27 Bell's manufacturer Machining .....................

HydroAx 611B New injectors, made the best valued log splitter.

Brute Force Mfg. ..................... 31

injector pump.

5.9 Uses cummins Handles logs upNew to 32”.

Buck Equipment (AIM) ........ 36 engine.

Rebuilt hydraulic pump Corley Mfgmotor. ..............................

13HP Honda Manual start32

and new teeth.option Item ....................

ID 13768. Sam CRD Metalworks 25 but electronic is available.

CW Mill-ArmorHog ..............

17 x702Log Lift. Uses 4-way wedge Has

CWHydroax Mill-Hogzilla ...................

15 1999 511EXtwo - New adjustable to single way. Great Dyna Products ........................ 35 cummins with onlySam 1500 Value!

PA.engine Item ID 12062. x702 Empire Hydraulics ................... 8

hours. Caterpillar just replaced Firewood Processor - This is a Great Lakes Mfg. .................... 34 gear box to hydraulics at the end homemade processor with a 10’ Hahn Machinery ...................... 3

Head.

Needs new teeth.

AC pressure guides.

Casting wheel 1994 Barko 160B -Top Electric

Ph: (888) 401-6367 x702 works.

Running today.

Priced knuckleboom, 30' boom, 75hp to move. is an extremely accurate machine Item ID 12845. Sam x702 is supported on both sides. This

Standard features:

motor, continuous in ve1y Rotobec good condition, Cuts 130

John Deere Dual Arch Grapple, 1/3 HP 120V Motor DEERE 440C feet a JOHN minute also has CLT presses. grapple, 5,000 original hours.

It has a13876. rebuilt engine about John Deere winch, Model Item ID Austin x7034000, Fork Pockets (excellent condition.).

Item a thousand hours ago,ID and it S & W 125 Band Mill with Cummins Engine, 6BTA, HDModel Gear Box is working daily.

Many videos 13238.

Chris x700 Caterpillar generator - Low hours available of it working, Clark Transmission 28000. Itemand ID 1995 Barko 775 B Feller Buncher Set on the mill, electronic computer can be sent upon request.

13738. Austin x703 ID 13887.

Austin x703 works,1 1/2" or 2" band, 22ft. track -Item Pumps recently redone.

400 hrs

KOMATSU

Cat 3406 140KW Genset, 12,400

on injection pump. always started JOHN DEERE 540B hours ready to run. Item ID 13434.

2007 Komatsu w/2009 This is a lowPC220LC hour 540B with good. in good working order. 22in Sam only x702 8000 hours. Transmission’s Log Max 7000XT processing CARRIAGES & DRIVES good, rebuilt winch is head. good kohing head. head works great. and the center section is tight.

2010 Cardinal HD Carriage 9700 hours on carrier.

7200 hours Item ID 13185.

Sam x702 Comes mounted floats. This Carriages (Sawmill)on - Cardinal on Log Max. Excavator style.on Cab little skidder should top 1999 Barko 160D - newwalk engine with Carriage line it includes carriage of the water. guard.

Flotation pads.

One owner. with onboard log turners, approximately 1500 hours.

Hour Item ID 13867.

Sam carriage x702 drive, hyd pac for carriage, Very good condition.

Item ID

meter dont work. The last 2 owners 13464.only Samused x702it to load trucks or have

cabinet with electronic drives for

2008 Komatsu Dozer carriage knees, husk including as a backup as D61-EX needed.

Has a CTR

2002 Hydro Ax 621E - Arouund BANDIT

Midwest Sharpening.............. 26

48" bottom saw and 36" Hours. top saw - Great Condition.

4511

12,000 hours on this machine.

1999 Bandit 1900 Tracked Disc 9 Mor bark .....................................

delimber, grapple has been rebuilt.

Komatsu U/C athave 95%.minor 35% Pads.

Boom cylinders leaks.6

Working-................................... daily.

Item ID 13884. 12 Multitek Chipper Cat Under Carriage at Austin x703 Piper's Saw Shop ....................

13 50% or better. 475 hp Cummins

STACKING RAC

Way ID Blade.

Fully Enclosed Item 13694.

Sam x702 comfort cab.

Great275 price!.

Item IDvalue 13570.

94 Barko - Excellent

Rotochopper ............................

1998 711EX Saw Head Feller 40

Diesel. 7500 Hours. One owner.

Row Electric ............................

20 Buncher - 30.5-32 tires ID at 40%; Well maintained.

Item 13294.

Sam x702 with low at hours at 3,500. 5.9 2012 Komatsu D61EX 15grapple.

Dozer CUMMINS continuous

Sawmill Exchange .................. 11

Cummins Sam x702 Engine rebuilt 1500 hoursBandit ago; 8750 hours; Quadco 2004 Beast Model 4680 -

Select Sawmill ......................... 19 Smith Sawmill ........................... 4

22” Large tree saw head.

Heat and 3412 Caterpillar Diesel engine The Paul Bunyan Show ......... 39 A/C 850 work. with HP.New 5300bearings hrs.

Millin insaw.

Thomas Industrial Controls .....

10

Lignomat 24 center section.

20” single postkicks unit.

Has a 4’................................. chain saw that

WoodMizer ................................

Remote control.

Big production l

❘

2012 JOHN DEERE 548GIII Single arch with blade SAW winch, HEAD FB withJD 44643D inch wheels, and all the Decent machine.

Estimated extensions, 1 new 28L and 3@ bells and whistles, its a production 1993 model. Serial number 50%.

This is still a new machine machine, with Super air strain conveyers ‘90 Bell T x702 available verification. capacity!.

Itemfor ID 13421.

Sam with only 3600 hours. that go up down, withengine. airbags, Recent JD recon Item ID:and 13896 BARKO Tires at 60%.

Saw it includes two sets Cameco ofSam Mcdonough Item ID 13780. x702 Contact: Sam

Ph:deck (888) x703 feed 20 401-6367 foot out feed deck

Metal Detector's Inc . .............. 30

13245.LOGGING Sam x702 EQUIPMENT

Cutting trees Saw today.

ID 13353. good condition.

Just finished 10 Union Grove & Item Knife .. 2, 37

Lumbermens  since 1986

10 hours on this machine since it clean skidder.

Contact: Austin has been ID rebuilt, it has a 24foot Item 13908.

Sam x702in

sawyers cab, computer controls,

Uni versal Refiner ...................

23 Sam x702 Acre clearing job, ready to work!

KMC

KMC Track Skidder 2500P Sam x702 head. Heat and air work. Item ID ❘  SELL YOUR EQUIPMENT TODAY ❘  24/7 SUPPORT - USED FORESTRY EQUIPMENT FOR SALE 0 379 Lumbermens  IssueFORESTRY 364  since 1986 l§ ❘  List  seLL  exchange  buy  save  Issue 364

2006 JOHN DEERE 700J DOZER This work horse comes with a winch, and new undercarriage, it is tight and ‘93 Barko 180B dry & running daily with 4500 hours.

Item ID:13883.

14077 Austin x703 Item ID Contact: Austin 84/85 John Deere Ph: (888) 401-6367 2006 JOHN DEEREx703 748GIII 440B/C 8700 hours, running daily.

Item 13908 Austin x703 Item ID: ID 13881.

Contact: Sam 2006401-6367 JOHN DEERE Ph: (888) x702 84/85 JOHN DEERE 440B/C FIREWOOD PROCESSOR FOR CLASSIFIEDS This skidder came in a box to Lavaco Powersuper Co 14, in with Colorado This is a Chomper a 60hp Call 888.401.MENS and is In a very verynice lowshape. hour Only skidder engine.

171 Seeonly pictures, prices, and with 5000 actual hours.

It hours, comes with green chain conveyer.

Location ofaall equipment at shows to be B model, but have All of the manuals for athe and to order parts for C.engine, It comes www.LumberMB\ISmagazine.com ‘95 John Deere C6 with the original 18.4 at the chopper itself cometires, with it, as well 25% with chains on all 4 tires.

BANDMILLS & schematics.

HEADSAWS as all of the electrical Tree Farmer New clutch, center is tight and Danckaert Band Resaw - Roughly Item everything works.Austin This is x703 a very ItemID ID:13894.

13920

Menominee Saw ..................... 29

ofHurst summer.

11000 hours total on 14 log deck.Boiler Has a............................. hydraulic grapple, cutter.

Tires are 28L’s chain kicker that @ all80%, runs2off 21 Ironand Bull ...................................

............................. @Kilgore 40% andSaw oneMercedes slick. Brand new 22 of a 4 cylinder power

on the body, with only 3000 hours on the new motor, comes with a set of chains, working daily.

Item ID 13878. Austin x703

 List  seLL  exchange  buy  save

❘

with only 750Item Hours.

Triple Sam Runs Great!.

ID 13740.

Rippers; Limb Sweeps; Enclosed x702 cab with Heat/AC; BELL6 way blade;

Undercarriage 1990 Bell Superat T 90%; - ThisExcellent Bell has IDengine.

13459. Sam aCondition!. brand newItem Duetz Lever

www.BakerProducts.net x702 control, 33” bar, pump and tranny 800.S48.6914 I S73.663.7711

2014 Komatsu 450 - Only 1100 ❘ L!  (888) 401-MENS NO. 13 ❘  LumbermensCO.com  Lumbermensmagazine.com

New "BUILT-RITE" Tumbler! ** CALENDAR** NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

1988 John Deere 8,995!

440D

Escanaba, Michigan $

Item#LOGGING 13781 & BIOMASS MID-ATLANTIC Contact: Fri, 15 Sept - Sam Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

LUMBERMEN’S

John Williams (888) 401-6367 ext. 701Equipment j@lumbermens.co Digest

feed deck 20 foot out feed deck

‘04 Woodmizer bells and whistles, its a production LT70 Hydraulic

with 44 inch wheels, and all the

machine, with air strain conveyers

Item ID: 13940

that go up and down, with airbags, Contact: Austin itPh: includes sets of Mcdonough (888)two 401-6367 x703

4’x702 diameter xpressure 8’ barrel guides. Top Casting wheel Ph: (888) 401-6367 Selma, North Carolina Hydraulic drive, Power Pack www.midatlantic-logging-biomass­ is supportedavailable on both sides. This expo.com/ is an extremely accurate machine Compare—Dollar for Dollar Your Best Firewood Processing Option! in ve1y good condition, Cuts 130 KENTUCKY WOOD EXPO feet a minute also has CLT presses.

800-757-2520 Fri, 15 Sept - Sat, 16 Sept

Trelan Chipper

THE PAUL BUNYAN SHOW Wood Splitters Item ID: 13866 Firewood Processors More! * Conveyors works,1 1/2" or 2" band,*22ft. track Fri, 6 Oct - Sun, 8 Oct * Contact: Sam

Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400

Ph: (888) 401-6367 x702

hours ready to run. Item ID 13434.

Sam x702 Mud Tracks.

Front blade.

Hood CARRIAGES & DRIVES

PROTECT ALL 58” Precision ** Them INFO LINK** ® Chipper With Pro-Tec-To Wrap

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Inc. ................ 33 Contact:Mill, Austin

guard.

Item IDHD 12267.

Sam x702 2010 Cardinal Carriage 2005 Valmet 941 Harvester - Totally Carriages (Sawmill) - Cardinal refurbished to toe! Very good Carriage linehead it includes carriage running condition.

Over $50,000 in with onboard log turners, carriage

Item ID: 13975

Ph: (888) 401-6367 x703 29 Saw .....................

Baker ......................................

5, 7 Menominee ‘88 John Deere 440D

recent maintenance. drive, updates hyd pac and for carriage, New center bushings; new sawyers cab,pin computer controls,

Item 13781 BruteID: Force Mfg. ..................... 31 Midwest Sharpening.............. 26 Equipped with 18” Waratah High Contact: Sam Buck Equipment (AIM) ........ 36 Morbark ..................................... 9 Speed Disc Saw. 28L x 26 Tires at Ph: (888) 401-6367 x702

Largest of rubber tired 48" bottom saw and 36"harvesters. top saw Has Valmet 370.2 processing head

AD SUBMISSIONS ‘94 Caterpillar Hydraulic Lines – Fuel Hoses – Air Lines May be sent to­ Bell's Machining ..................... 27 Metal Detector's Inc. .............. 30 Skidder 320 morris@lumbermens.co Electric Wire Bundles – ControlReman Cables Cummins Engine.

Item ID:POSTMASTER 13936 Send address Contact: Austinchanges to: Lumberman's Exchange Ph: (888) 401-6367 x703

10 hours on this machine since it

Caterpillar generator - Low hours info@built-rite.com www.lumbermenonline.com on the mill, electronic computer Set

DESIGN DIRECTOR

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

Danckaert Band Resaw - Roughly

LUMBERMEN’S Equipment Digest 750 East Item ID 13876. Austin x703Hill Rd. Lexington, Kentucky PO Box 1146 Ludlow, VT 05149 http://www.kfia.org/ S& 125 Band Mill with Columbia, TNW 38402-1146 www.built-rite.com KentuckyWoodExpo.aspx 1-800-477-7606 Fax (931) 388-3564

MARKETING DIRECTOR

MAILING ADDRESS

BANDMILLS & HEADSAWS has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept Only

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

Mfg&..............................

32® SLEEVE Multitek ................................... 12 PRO-TEC-TO®Corley WRAP PRO-TEC-TO 40% complete with chains. This Piper's 13 CRD Metalworks ....................

25 CUT YOUR inDOWNTIME AND YOUR COSTS! machineSaw has Shop been .................... extremely well very good shape and has been

P.O. Box 1916 Columbia, TN 38402

Thehours.

Lumberman's Exchange is Against ............................

CW Mill-ArmorHog 17 Rotochopper maintained and runs very well.40 4000 Torque convertor well maintained.

Item ID..............

12194.

Protection Pinching, Crushing, Rubbing & Abrasion published monthly by Woods Hard to find them in this good20 transmission.

14–Box hole wheels.

EVEN UV Tires RAYS! Sam Both are Impervious to Oils Solvents.

CWx702 Mill-Hogzilla ...................

15 and Row Electric ............................

Publishing, P.O. 1916, Columbia, 38402. of condition.

Has a .................. twin that is11 are 30.5’s at TN 55% and All onerights at 80%.

‘98Dyna Timberjack 1270B - 7,300 hrs. 35 Sawmill Products ........................

Exchange reserved. All editorial/ advertorial Provides Maximum Protection for Logging, For The Distributor available if you need two units.

Center has very Perkins 6 Cylinder Engine. All submissions are little used slack. at the This Empire Hydraulics ................... 8 Select Sawmill ......................... 19 Construction Stationary Applications discretion ofbeen the publisher and may Call Item Nearest ID 12524.You, Sam x702 skidder has a back&up skidder modules and Like: computer are brand be edited for purposes of clarity Great• Forklift Lakes Mfg . .................... 34 Smith Sawmill ........................... 4 • Debarker Buggies • Pantograph Arms Masts 2005 Valmet 860.1 8-Wheeled forand thespace. several years. all Skidder new. Tires on average are around Although efforts has have • Wheel Loaders • Skidder Grapples • Knuckleboom Loaders The Paul Bunyan Hahn Machinery ......................

3 been made to ensure accuracy of orShow Visit.........

Forwarder - 17,800 hours.

New39 12000 hours. Item ID 13805. Sam 80% Video: http://youtu.be/R_ Fellerbuncher Heads • Harvesting Heads • Stroke content •submitted by advertisers www.pro-tec-toproducts.com Hurst BoilerItem .............................

14 Thomas Industrial Controls 10 hydraulic transmission and..... gear x702 MQZe5QEFw. ID 13572. Chris Delimbers • Dozer Blades and writers, the Lumberman's Exchange, its principles and box in Grove 2013. $70,000 updates in 1981 Timberjack 520 Hoses - Very hard to x700 Iron Bull ...................................

21 Union Saw &of Knife .. 2, 37 ® Anywhere associates, are not held liable & forWires Are – Pro-Tec-To Products OEM’s, Repair Facilities & 2012. Bogies just resealed.

Spare come by!

653 Detroit.

Runs Protection, Great!.

VALMET errors orOffers omissions.

Reproduction, Maximum Lower Reduced KilgoreCosts, Saw .............................

22 Distributor Universal Refiner ...................

23 Inquires Welcome in wholeDowntime or part, is prohibited and Lesswith­ Spills! 1998 Valmet 603 3-Wheeled pump ($7,000 value) Good running Item ID 13741.

Sam x702 Lignomat ................................. 24 WoodMizer ................................ l out written consent. condition. Sisu engine uses 4 gal/ 2002 Timberjack 608s with hot saw Buncher - 6500 hours on total ©2017 Woods Publishing

800-355-1250

bogey resealed; cabinetseals; withvalves electronic drivesallfor cylinders packed.

10,200 hours. carriage knees, husk including

STACKING RAC

with less than 4000 hours. Engine runs well. Tires at 50%. This is a

hard to find gem and priced below market. Item ID 12569. Sam x702

2005 Valmet/Timbco 415 Harvester with 370E Head - 15,400 hours.

370E Harvesting head just added in 2010 and has 7000 hours. 36”

Triple Grouser tracks rebuilt one year ago and are at 80%. Sisu

engine that is very stingy on fuel.

8’ squirt at end of boom for 30’

reach.

Reversible fan and auxiliary www.BakerProducts.net I S73.663.7711 oil 800.S48.6914 cooler. Still runs OK. Cutting

hour. 16 ton capacity. One set of - Approx. 6000 hours, Machine is machine but no hours on 4BT3.9 - USED FORESTRY EQUIPMENT FOR SALE  SELL YOUR EQUIPMENT TODAY TODAY ❘ 0  24/7 SUPPORT SALE ❘ l§ SUPPORT

today but will needs some basic ❘ L!  (888) 401-MENS NO. 13 401-MENS

 Issue 364

 Lumbermensmagazine.com

Lumbermens  since 1986

❘

 List  seLL  exchange  buy  save

❘

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘93 Barko 180B

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: 14077 Contact: Austin 3-Hd ‘14 Hurdle Ph: (888) 401-6367 x703

Block Sawmill

Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

Item ID: 13997 Contact: Austin Ph: (888) 401-6367 x703

2006 CAT 517

Item ID: 13869 Contact: Sam Ph: (888) 401-6367 x702

‘95 John Deere C6 Tree Farmer Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

‘13 KMC 2500 Track Skidder 13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703 off ontoKomatsu a conveyor. This is a very ‘14 WA200

Firewood Proc.

capacity!.

Item ID 13421. Sam x702 Item ID: 13865

BARKO Contact: Sam

Ph:Barko (888)160B 401-6367 x702 1994 - Electric

well built processor. Item ID 13820.

Loader

knuckleboom, 30' boom, 75hp

motor, Rotobec continuous boom loader, 3 knife disc, Newer grapple, 5,000 original hours.

Sam x702 One Owner, low hours! discharge chute, New banding We also offer expert Sharpening Services, plus… (excellent condition.). Item ID Firewood Processor - This is Item ID: 14010 around disc, Brakes and tires are We have the most popular sizes in stock & ready to a Chomper Model 16 PDA 13238. Chris x700 Contact: Austin also OK, Everything works well ship from major manufacturers, including…

‘05 Gehl CTL 70 Ph: (888)firewood 401-6367 x703 1995 Barko 775 B Feller Buncher automatice processor Newer clutch -- with outboard Item ID: JW-986495 - Pumps recently redone. 400 hrs with John Deere power unit with bearing, Had Cummins KTTA 750 Contact: J Williams on injection pump. always low hours. Control… panel andincludes just about any Custom Sawsstarted you 2011 Liebherr A924 Rubber Tired HP engine -- needs repower. Item Ph: (888) 401-6367 x701 good.you in good working order. 22in tach, oil pressure, water temp needandto keep cutting longer…

Log Handler. Liebherr 4 cylinder ID 12443. Sam x702 kohing head. head works amp gauges. Cuts logs up to 16”. forgreat. less! engine with great fuel economy.

1997 Morbark Model 2400 Chipper Item ID: 13854 Item ID 13185. Sam x702 chain conveyer, 8 way splitter, on One owner and comes with all Item ID: 14073 Contact: Sam 11,230 hours. Fixed cab riser. Two - Has a Cumins diesel engine and 1999 Barko 160D - new engine with 20,000lb goose neck trailer.

Item ID manuals and receipts. Purchased Contact: Austin Ph: (888) 401-6367 x702 section boom with 38’ reach. Cab runs great. All fluids and filters approximately 1500 hours. Hour 13916. Austin x703 new for $32,500. Item ID 13865.

Ph: (888) 401-6367 x703 Item ID: 13993 Call Marvin Miller for a quote 231-924-5953 • (fax) 231-924-6166 • 11606 Rd. Holton, MI Item 49425 have•been changed.

ID 13429. protection. 4-Wheel driveBrickyard and Contact: Austin meter dont work. The last 2 owners Best Value Portable Log Splitter Sam x702 trailer. 4-Wheel drive and steering. steer. Push blade. Can pull loaded Sam x702 Ph:1700 (888) 401-6367 have only used it to load trucks or with hours, in very x703 good - Small manufacturer in PA has LOGGING EQUIPMENT Top Quality machine. Would be trailer. Cleaned, serviced and 1999 Morbark 1400 Tub Grinder as a backup as needed. Has a CTR condition. Easily produces high made the best valued log splitter.

BANDIT inspected. Tight and dry and ready Loader w/Cab; 4200 hours; Very hours on this machine, in excellent great for log yard or mill work. delimber, grapple has been rebuilt. quality chips with patented ‘Cone’ Handles logs up to 32”. Uses 1999 Bandit 1900 Tracked Disc Item ID 13476. Sam x702 for work. Located in Baltimore, condition. Item ID 13937. Austin good condition. Located in PA. Boom cylinders have minor leaks. drum design. Can easily load 42’ 13HP Honda motor. Manual start Chipper - Cat Under Carriage at x703 2011 Liebherr A904 Rubber Tired MD. Item ID 13478. Sam x702 Item ID 13361. Sam x702 Item ID 13694. Sam x702 vans and produce 6 - 8 loads per but electronic option is available.

50% or better. 475 hp Cummins Log Handler. Liebherr 4 cylinder 2006 Morbark 6600 Horizontal LIEBHERR LINK-BELTRECONDITIONED: 94 Barko 275 - Excellent value Diesel.

7500USED, Hours. One owner. day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge YOUR SOURCE FOR engine with fuel economy.

Grinder hours 2007 Liebherr A924C Log Handler 1997 Linkbelt 3400 hasID rebuilt • Squirrel Cage Motors Motors - Crane and Mill Three-Phase with low -atApprox. hours at6000 3,500.

5.9 on EDGERS & GANGS adjustable to great single two way. Great• DCWell maintained.

Item 13294.• Transformers,

BANDSAW BLADES

‘83 John Deere 2000 W900 KW w/ 4850 Rotobec MT27

‘04 CAT 953C Frontend Loader

Gang • Edger • Scragg Trim • Split • Strob

Heavy Specto your lengths!

Welded

ROW ELECTRICAL EQUIPMENT, INC.

Rubber Saws Tired-Log Brewco TwoLoader.

Brewco13,000 Saws hours.

40’ Reach with two section in excellent condition. Runs great. boom.

LogSam Grapple Item ID60” 13644. x702 with continuous rotation.

Fixed Cab FIREWOOD PROCESSORS

RiserShop withBuilt cab guard 2010 Woodprotection.

Processor Tight and40dry.

-Front It haspush a 353blade.

Detroit diesel,

PSB Post Peeler

• hours.

Gear Motors • Adjustable Speed Drives36” Pads • Across/Line Starters 11,230 Fixed cab riser. this wellMagnetic maintained machine.

Pierce Stroke Delimber.

CUMMINS continuous grapple.

Value!

PA. Item ID 12062.

SamTwo x702 Sam x702 • Wound-Rotor Motors • Generators AC and DC • Reduced Voltage Starters section boom with 38’ reach.

Cab Has New Cat Dealer Rebuild on 60% undercarriage.

5221 hours.

Runs Great!.

Item ID 13740. Sam Firewood Processor - This is a 2004 Bandit Beast Sets Model 4680 - • Safety Item ID: 13926 • Synchronous Motors • Engine-Generator Switches protection.

4-Wheel drive and 1000HP Engine Good running condition.

Owner Contact: Sam x702 3412 Caterpillar Diesel engine • Phase homemade processor with a 10’ • Transformers, • DC Motors Single Phase Convertors at 5000 hours.

Ph: 401-6367 steer.

Can pull loaded trailer.

42” X(888) 66-5/8” HAMMERMILL; just spent $30,000 on upgrading Item BELL x702 with 850 ID: HP. 13994 5300 hrs. Mill in log deck. Has a hydraulic grapple,

Shop Built Firewood Proc.

‘05 Timberjack P.O. Box608B 2812 • Toledo, Ohio 43606

Cleaned, andallinspected.

VARIABLE SPEED INFEED delimber.

Item ID 12992.

Sam x702 Contact: Austin Fax to: serviced 800-248-4479 1990 Bell Super T - This Bell has chain that runs off good condition.

Just finished 10 Itemand ID:kicker 13898 WWW.RoWELECTRiCAL.CoM

Ph: (888) 401-6367 x703 Tight and dry and readypower for work.

Acre clearingMORBARK job, ready to work! of a 4 cylinder Mercedes 419-244-8887 Contact: Sam rowelec@glasscity.net Electric 3Phase

engine.

Recently SYSTEM; HAMMERMILL acylinder brand new Duetz engine.replaced Lever 419-248-4479

turbo. at 50%.

16” Rapid Located in Baltimore, MD. ID Remote DRIVE23.1 INCLUDES ALL BELTS, Cleaned, andsaw, Checked 1987 Morbark WCL NEEDS Ph:Has (888) 401-6367 x702 inch insertServiced, tooth circle foot control, 33”tires bar, pump and tranny control.27Big production unit. chain saw thatItem WE 30 ANSWER THEa 4’PHONE 24kicks HOURS • WE BUY USED ELECTRICAL chipper for easy knife access.

Buncher shear head. Machine is 13477. Sam x702 SHEAVES, BUSHINGS & out for service. Can pull loaded MOTORhood - Morbark 1000 Knuckle 30 ft. x 10 ft CAT chain infeed bed. fast and in very good condition.

379  Issue 364 Lumbermens  since 1986 ❘  List  seLL  exchange  buy  save ❘  LumbermensCO.com Item ID: 13998  Issue 364 Lumbermens  since 1986 machine. ❘  Item ListID  13486. seLL  exchange  buy operators’ save ❘  Lumbermensmagazine.com condition Enclosed weatherized Item ID 12531. Sam x702 Contact: Austin

Slab Edger

Ph: (888) 401-6367 x703

Sam x702

cab is mounted on rubber shock

PRENTICE

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

Crosstable Lumber SOUTHWEST FOREST PRODUCTS EXPO Grade-Printer Fri, 25 August Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

• Flex-tip Rotary Airlocks -5 models PUBLISHER • 8’-13’ Dia Storage Silos Woods • Flanged welded pipePublishing and elbows • 26 to ADVERTISING 16Ga galv. lock seam pipe & elbows SALES • Sgl, Dbl & Morris Triple trailor loadout Woodssystems

Escanaba, Michigan

MID-ATLANTIC

(888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR John Williams (888) 401-6367 ext. 701 j@lumbermens.co



DESIGN DIRECTOR 4200 S 900 W • Topeka, IN 46571 www.honeyvillemetal.com Phone (800) 593-8377 • Fax (260) 593-2486 Donna Heninger Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402 The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

Selma, North Carolina www.midatlantic-logging-biomass­ o Lumber Mill Grade Printers expo.com/ o Panel Mill Grade Printers

Danckaert Band Resaw - Roughly Inkroll 10 hours on this machine Sizessince in 8it

feed deck 20 foot out feed deck Colors! with 44 inch wheels, and all the Panel Printer bells and whistles, its a production that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

is supported 4 on both sides. This ye 0 Pallet Printer is an extremely se ars accurate /stripe machine Marker rv ing o Laminated Beam Printers t in ve1y he condition, Cuts 130 lum good KENTUCKY WOOD o Wet INK & INKEXPO Roll Systems inda minute be feet us r also has CLT presses.

Fri, 15 Sat,Edge 16 Sept o Sept Edge/ -Dual Printers t ry Item ID 13876.

Austin x703 Lexington, Kentucky o Stripe Markers and Stud Printers http://www.kfia.org/ o Hand Stampers and Hammers S & W 125 Band Mill with KentuckyWoodExpo.aspx o Custom Designed Marking Systems Caterpillar generator - Low hours Available Upon Request. Email : sales@claussenallmark.com on the mill, electronic computer Set THE PAUL BUNYAN SHOW Visit : www.claussenallmark.com Call : 1-800-252-2736 works,1 1/2" or 2" band, 22ft. track Fri, 6 Oct - Sun, 8 Oct

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

BANDMILLS &Custom HEADSAWS

machine, with air strain conveyers

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept LOGGING & BIOMASS EXPO

Mill's Requirements

has been rebuilt, itDifferent has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

• Material handling fans Since 1986, Lumbermens has 500 to 58,500 CFM published a monthly circular • Pulse Jet Baghouse Filters (round & sawmills, square) reaching loggers, • Centrifugal Cyclonerecyclers collectors pallet makers, and 36 models industrial woodworking plants • Overhead Dust Storage Bins (round & square) worldwide.

FOR CLASSIFIEDS en ss s u l a Call 888.401.MENS cl r ol e " k in e t h ard ar and and See pictures, prices, " st Location of all equipment at Designed to Meet Your www.LumberMB\ISmagazine.com

Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434.

** INFO LINK**

Sam x702

Innovative

CARRIAGES & DRIVES

2010 Cardinal HD Carriage

Carriages (Sawmill) - Cardinal Clean-Burn Design

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7 Menominee Saw ..................... 29 Manufacturing a full line of biomass fired Bell's Machining ..................... 27 Metal Detector's Inc. .............. 30 combustion systems backed with fifty years of innovative clean-burn design. Diverse every Brute Force Mfg. .....................

31 inMidwest Sharpening.............. 26 way with multi-fuel blending capability. Hurst Buckstokers Equipment ........

36 Mor bark ..................................... 9 utilize (AIM) hundreds of common and abundant solid biomass fuels.

Corley Mfg .............................. 32 Multitek ................................... 12 Large or small scale, project Piper's CRD Metalworks ....................

25 with management is eased the Saw Shop.................... 13 impressively short installation time CW Mill-ArmorHog .............. 17 Rotochopper............................ 40 required with prefabricated CW Mill-Hogzilla ...................

15 Row Electric ............................ 20 modular components.

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3 Rotary Dryers Hurst Boiler ............................. 14 Sand Dryers Grain Iron Dryers Bull ................................... 21 Lumber Kilns Kilgore Saw ............................. 22 Cement Kilns Brick Kilns................................. 24 Lignomat

The Paul Bunyan Show ......... 39

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Carriage line it includes carriage

with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including 48" bottom saw and 36" top saw

STACKING RAC

Thomas Industrial Controls..... 10 Union Grove Saw & Knife.. 2, 37 Universal Refiner ................... 23 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

50

www.BakerProducts.net YEARS 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 15

Cro Gra

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

John Deere 640C Item ID: 2539

Hard to find 640C model, that’s been very well maintained, tight center section, no leaks, comes with a set of chains.

‘95 John Deere C6 Tree Farmer

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘13 KMC 2500 Track Blockbuster 1412 Plus Skidder Item ID: 958

Item 14078 2015 modelID: with PLUS package and only 50 hours on it.

Comes with 8 way and 6 was splitting head. Machine is Contact: Austin in like new condition.

Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

153 Fabtek Processor

H O T

B U Y S

Item ID: 8763

2001 Fabtek 153, 4 roller fabtek harvester head, 13133 frame hours, less than 500 hours on rebuilt motor, newer sprockets, new turn bank, resealed valve bank, ready to work! Entire spare parts head included! Call for more pictures!

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

‘83 John Deere 4850

Timbco 445D Item ID: 1326

2001 model and is a 2 owner machine with 10000 frame hours, UC is at 40%, cab has heat & ac. New pumps, overall machine is mechanically sound.

‘05 Gehl CTL 70 Contact: AUSTIN Email: Austin@lumbermensco.com Item ID: JW-986495 EXT 703 Phone: 888-401-6367 Contact: 931-797-8029 J Williams Ph: (888) 401-6367 x701

Franklin Q70 Item ID: 5458

chain way splitter, on 2003 model just conveyer, completely 8serviced, has newer 120” esco Grapple, reman motor, and new hydraulic 20,000lb goose neck trailer.

Item pump. Skidder is dry and currently working daily. ID

Item ID: 14073 Contact: Austin 13916. Austin x703 Ph: (888) 401-6367 x703Contact: AUSTIN

Email: Austin@lumbermensco.com Best ValueEXT Portable Log Splitter Phone: 888-401-6367 703 OR 931-797-8029

with 1700 hours, in very good

- Small manufacturer in PA has

quality chips with patented ‘Cone’

Handles logs up7822 to 32”. Uses Item ID:

condition. Easily produces high

made the best valued log splitter.

Prentice 180

drum design. Can easily load 42’ 13HP with Honda motor.hours, Manualjoystick start 1994 Model 10,000

control, 6 cylinder Cummins motor, tight turn vans and produce 6 - 8 loads per electronic is available. table, andbut plumbed for aoption bucksaw.

Work ready

day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge Contact: AUSTIN

EDGERS & GANGS

Email: Austin@lumbermensco.com adjustable to single two way. Great Phone: 888-401-6367 EXT 703 OR 931-797-8029

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

2011 FIREWOOD PROCESSORS

Value! PA. Item ID 12062. Sam x702 Firewood Processor Ecolog 590D- This is a

Item processor ID: 874 with a 10’ homemade

model with 12800 hasgrapple, Logmax log deck.

Has a hours, hydraulic 6000B series Head. Lots of recent work done.

2010 Shop Built Wood Processor chain and kicker that all runs off Work ready!

- It has a 353 Detroit diesel, 40Contact: AUSTIN of a 4 cylinder Mercedes power

inch insert tooth circle saw, 30Email: foot Austin@lumbermensco.com unit. Has a 4’ chain saw that kicks Phone: 888-401-6367 EXT 703 OR 931-797-8029

379  Issue 364

Lumbermens  since 1986

❘

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029 off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

Item518 ID: 13920 CAT Grapple Skidder

Contact: Austin Item ID: 3577 Ph: (888) 401-6367 Cat 518, approx 12,000 frame hours, x703 1500 on rebuilt engine and transmission, center pins are tight, dry machine, currently working 28L's 30%, seller has 23.1's at 80% or better that he can include for an extra $4k, seller is retiring from logging. Call for more pictures!

capacity!. Item ID 13421. Sam x702 Contact: MARK BARKO Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 1994 Barko 160B - Electric

702-875-2703 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

John Deere 444k grapple, 5,000 Item ID:original 9302 hours. (excellent condition.). Item ID

2009 model and is a one owner machine with 4900 original hours.

Condition is like new. Ready to go to work.

13238.

Chris x700

a Chomper Model 16 PDA

1995 Barko 775 B Feller Buncher automatice firewood processorContact: WALKER Email: Walker@lumbermensco.com Pumps recently redone. with John Deere power unit with Phone: 888-401-6367 EXT 707 400 hrs on injection pump. always started low hours. Control panel includes

good. in good Grapple working Skidder order. 22in tach, oil pressure, water temp and John Deere 648G3 Item ID:head 7701 kohing head. works great. amp gauges. Cuts logs up to 16”.

2005 John Deere 648G3 grapple skidder approx 17k frame

new cradle, cylinoid on the turn on grapple needs ID 13185.

Sam x702 One owner and comes with allhours brand Item replaced, o ring on the front by the hydraulic pump leaks

a little bit, new block,160D new crank, valve bank redone, 1999head Barko - new engine with manuals and receipts. Purchased transmission is tight, no blow by in motor. "As clean a motor as you'll see" dry machine, currently working. Call for more pictures!

new for $32,500. Item ID 13865.

Sam x702

approximately 1500 hours. Hour

Contact: MARK meter dont work. The last 2 owners Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703

LOGGING EQUIPMENT BANDIT

have only used it to load trucks or

1999 Bandit 1900 Tracked Disc

delimber, grapple has been rebuilt.

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702 415 w/Fabtek Head Timbco Item ID: 88374680 2004 Bandit Beast Model

2001 timbco 415 fabtek 5head reabuilt head 5900 3412 Caterpillar Diesel engine hours on rebuilt John Deere engine approx 22k frame 90% tracks and undercarriage. Ready to work. Call for with 850 HP. 5300 hrs. Mill in more pictures!

good condition. Just finished 10 Contact: MARK Acre clearing job, ready to work!

Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 Remote control. Big production

702-875-2703

 List  seLL  exchange  buy  save

as a backup as needed. Has a CTR Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Morbark 58”IDLIKE NEW Runs Great!. Item 13740.

Sam Item ID: 6114 x702

This chipper comes equipped with chip pack and 20’ vibrating conveyer, it is a 2017 model with only 2 hours on it! In like new condition!

BELL

1990 Bell Super T - This Bell has AUSTIN aContact: brandAustin@lumbermensco.com new Duetz engine. Lever Email: Phone:33” 888-401-6367 EXTtranny 703 control, bar, pump and

931-797-8029 ❘

 LumbermensCO.com

** CALENDAR** Timberpro TF 830C Item ID: 8077

2018 Timberpro combo 830c tier 3. Has 2018 SP 761 danglehead with top saw and 2018 supergrip 360 bucket, 2 sets of tracks, fire suppression, pre heater, LED lights, 700 working daily, under warranty FIELD until March of 2019 NYhours STATE WOODSMEN'S DAYS

Fri, 18 August - Sun, 20 August

Contact: MARK Boonville, New York Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703 www.starwebhosting.net/woodsmen/

'94 CAT 518 Grapple Winch Thegreat Tree 12k hours runs tight center section that Started it All!

Escanaba, Michigan

Timberjack 1270C MID-ATLANTIC LOGGING & BIOMASS Item ID: 8676 Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing Morris Woods 660 Grapple (888) 401-6367Skidder ext. 704 Item ID: 1876 morris@lumbermens.co

72ND ANNUAL GREAT LAKES Contact: MARK Email: Mark@lumbermensco.com LOGGING & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 708 OR 702-875-2703 Thurs, 7 Sept - Sat, 9 Sept

has been rebuilt, it has a 24foot in Contact: MARK feed deck 20 foot out feed deck Email: Mark@lumbermensco.com Phone: 888-401-6367 708 with 44 inch wheels, andEXT all the

702-875-2703 bells and whistles, its a production

MID-ATLANTIC

LOGGING & BIOMASS EXPO

It has a Timberjack 762C head with a Timberjack 3000 North computer. Selma, It comes with an extraCarolina set of delimbing knives and book on the head. www.midatlantic-logging-biomass­ expo.com/ Contact: JOE

Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

Lexington, Kentucky John Deere 648G III

two 2001 660 timberjack grapple skidders. Working machine has tigercat bunching grapple on it, dual arch machines, one has two nice double diamond chains, dry Machines, 3000 John Williams hours on rebuilt 8.3 cummins engine, brand new $8k dollar hydraulic pump 1 1/2401-6367 week ago, the other machine hydraulic (888) ext.

701 pump is at approx 200, CAB IS BURNT, everything else on j@lumbermens.co machine is in good working order. Selling only because machines are too big. Package Only Call for more pictures

Item ID: 2929 http://www.kfia.org/ KentuckyWoodExpo.aspx (12K hrs) Front tires new, back tires 75% remaining tread.

Contact: MARK Donna Heninger Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR EQUIPMENT

702-875-2703 REPS

Contact:Fri, JOE 6 Oct - Sun, 8 Oct Email: Joe@lumbermensco.com Cambridge, Phone: 888-401-6367 EXT 709Ohio OR 801-362-2170

MARKETING DIRECTOR

Transmission has an issue: it is s as if every other gear didn't work (2nd, 4th... etc...), therefore going to sell as-is (cheaper) THE PAUL BUNYAN SHOW

DESIGN DIRECTOR

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

www.ohioforest.org

** INFO LINK**

2016 Timberking talon 900 3 blade edger, only 6 hours,

$16,995.00 engine 24.5 hp Koehler.

Fullyitpor10 hoursnew, onGas this machine since table, like new Call for more pictures.

machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130

CAT 515 Grapple Skidder

feet a minute also has CLT presses.

Item ID: 2042 Item ID51513876.

Austin x703 2000 Cat grapple skidder, approx 4000 true hours, 28L tires, 2 like new, 2 50%, coolant and oil tested by

Scat&and Wdocumented 125 Band Mill on July 24thwith 2018, enclosed cab, working heat/air, everything is in great working condi-

Caterpillar - Low hours tion. Call for moregenerator pictures!

on the mill,MARK electronic computer Set Contact: Email: Mark@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 708 Cat Genset, 12,400 3406 140KW 702-875-2703 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 17

B U Y S

published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

Item ID: 6992 Danckaert Band Resaw - Roughly

1995 Valmet 892Springs, forwarder Volvo td6 motor, motor rebuilt Hot Arkansas appox 4000 hours ago, dry doesn't burn any oil Put sure-grip controls inwww.arkloggers.com it and all new windows resealed valve body for hydraulic functions and resealed the jib cylinder bought just for a backup machine hardly used it Call for more pictures!

Contact: SAM Email: Sam@lumbermensco.com Since 1986, Lumbermens has Phone: 888-401-6367 EXT 702

Talon 900 Edger BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS 892 Valmet ForwarderEXPO Item- ID: Fri, 25 August Sat,4040 26 August

H O T

Item ID: 99807

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

BELL Super T

“Precision Under Pressure”

Phone 315.284.4126Item ID: 6145 Fax It has a Deutze engine, lever controls, undercarriage is NEW 315.849.2045 along w/motor Website& transmission re-done approx. 1,000hrs ago.

It has a 32in. BELL head. In really great conditions and being www.empirehyd.com used daily. A/C - heat works good. Everything in working order.

Email info@empirehyd.com Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

Morbark 40/36

BELL Ultra T Item ID: 184

It has a 4 cylinder Deutz engine turbo. Good tires and tire chains, 24 inch cutting head. Good motor and hydraulics, everything works great. A/C works great! Woods-ready!

Being used currently everyday. No issues whatsoever!

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

‘16 Halverson Item ID: 647H140 It has a CAT engine (755hp) with a sloped live Skidsteer (DEMO) floor and large top feedwheel. Brand new clutch Item installed. ID: ReadyJW-909632 to work!!!

Contact: J Williams Contact: JOE Ph: (888) 401-6367 x701 Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709

801-362-2170

CAT 525D ‘93 Barko Item ID:180B 9555

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

(7.5K hrs) Brand new CAT transmission approx. 2000hrs ago.

CAT itself rebuilt the engine approx. 600hrs ago. Tires size 30.5 32 tire w/85% tread remaining. Dual arch with a winch.

Being used everyday! No issues! Very nice machine! Clean and tight!

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709

801-362-2170

Prentice 2280 Item ID: 1628

It's gone through an over-haul approx. 1100hrs ago. Everything in good working order. Comes with delimber and topper. No bucksaw, just the saw in front of boom. Although, it does have hook-up for bucksaw. Tight machine, no issues, ready to work!

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

‘13 KMC 2500 Track Skidder John Deere 335C

Item ID: 5112

(13K hrs) 2 owners who take care of it well. All the cylinders have been packed, except the 2 front out riggers. New fuel pump put on approx. 600hrs ago.

Comes with delimber, no bucksaw. Bucksaw can come with it, 13428 though for a lil' more. Needs Load-ready!

Victory Ln.nothing. // PO Box

Item ID: 329

Item ID: 14078 (14K hrs) It comes w/a Riley delimber with good, strong Austin knives. BoomContact: has topper, but it's selling with neither the slasher shown in the pictures, nor the bucksaw.

A lil' slack Ph: (888) 401-6367 x703 is there on the boom turn gear, but not deal-breaking.

124 Adams Center, NY 13606 Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709

801-362-2170

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 709 OR 801-362-2170 off onto aEXT conveyor.

This is a very

well built processor. Item ID 13820.

425 SamTimbco x702

H O T

B U Y S

Prentice 384D

Item ID: 5710 Firewood Processor - This is

(13K hrs) Undercarriage and track drive pumps have all been replaced at 10K hrs. It has a BELL dangle head on it that came off a Chomper Model 16 PDA a 2001 BELL Ultra C. Owner can also include the original Timbco 33" bar saw for a little bit more.firewood Currently cutting.

No issues. automatice processor

‘05 Gehl CTL 70 CATDeere 559C ‘83 John

Contact: JOE Item ID: JW-986495 with John Deere power unit with Email: Joe@lumbermensco.com Contact: J Williams Phone: 888-401-6367 EXT 709 OR 801-362-2170 low hours. Control panel includes Ph: (888) 401-6367 x701

tach, oil pressure, water temp and Timbco 425 Item ID: 5627 amp gauges. Cuts logs up to 16”.

Item ID: 269

4850 (11.5K hrs) Comes with the 426 CTR delimber.

Needs nothing.

Clean tight, no slack, turn gear Item ID: 14073 tight! Working everyday.

Contact: Austin Contact: Ph: (888)JOE 401-6367 x703

Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709

with 1700801-362-2170 hours, in very good condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

John Deere 437E

in excellentItem condition.

Runs great.

ID: 9508 Item ID 13644. Sam x702 (1K hrs) Clean machine, everything

is tight.

Owner is getting out of the logging business and lowering payments ASAP

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor Contact: JOE -Email: It has aJoe@lumbermensco.com 353 Detroit diesel, 40 Phone: 888-401-6367 EXT30709 inch insert tooth circle saw, foot

801-362-2170 379  Issue 364

(11K hrs) Ledgering system doesn’t work, trail wheel needs to be

new owner wiring andand a new sensor.

Thewith undercarriage chain conveyer, 8 way splitter,fixed. on It does has One comes all is at 40 with a 5.9 engine. A/C - heat works! There's a computer glitch

20,000lb goose neck trailer.

13916. Austin x703

(waiting to be fixed) where to tip the head back, you have to hit Item ID function manuals and receipts.

Purchased another and then the head will move back.

The computer system has been checked and re-calibrated by Woodland Equipment in (MI) 18mo. ago.

It has processing head.ID 13865. new fora Risley $32,500.

Item

Contact: JOESam x702 Best Value Portable Log Splitter Email: Joe@lumbermensco.com

made the best valued log splitter.

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better.

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Kenworth T800 Value! PA. Item ID 12062.

Sam x702 Item ID: 6755 Firewood Processor - This is a (44K miles) It's gotprocessor a HOOD 7000 extended homemade with aboom 10’on it, still with manufacture warranty. The boom has been on it fordeck. a year. Being used 2 yearsgrapple, only of life. log Has a everyday. hydraulic

chain and kicker Contact: JOE that all runs off Email: Joe@lumbermensco.com of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 709 unit. a 4’ chain saw that kicks Has 801-362-2170

Lumbermens  since 1986

❘

Item ID: 13920 Contact: Austin 648H John Deere Item ID: 7555x703 Ph: (888) 401-6367

(10.5K hrs) Dual arch, with transmission rebuilt approx. 5K hrs ago and a new water pump approx. 20hrs ago. Doesn't need anything.

Woods-ready!Item ID 13421. Sam x702 capacity!.

Contact: JOEBARKO Email: Joe@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 709

801-362-2170 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

John Deere 648G III

good. in good working order. 22in Item ID: 6699 kohing head. head works great.

(5K hrs since reman motor) Have receipts to show

some ID of the work done.

Hasx702 a winch, works well.

Item 13185.

Sam Single arch skidder, odometer shows 15K hrs. Good

machine for the 160D price - new engine with 1999 Barko Contact: JOE 1500 hours. Hour approximately Email: Joe@lumbermensco.com meter dont work. The last 2 owners Phone: 888-401-6367 EXT 709 only801-362-2170 have used it to load trucks or

LOGGING EQUIPMENT as a backup as needed. Has a CTR BANDIT Kubota SVL-95 2s Item ID: 4861

Phone: 888-401-6367 EXT 709 OR 801-362-2170

- Small manufacturer in PA has

‘95 John Deere C6 Tree Farmer

Chipper - Cat

Diesel. 7500 Hours. One owner.

Well maintained. Item ID Sam x702

delimber, grapple has been rebuilt.

This is in LIKE-NEW conditions. Only 420hrs. It’s currently on a small need it any longer.

It hasminor high flowleaks. joystick Boom cylinders have Under Carriagejob. at Owner doesn’t controls, radio, A/C - heat works. It has the load sensing closed center hydraulics with parallel loader control valve. Very tight ItemtoID Sam x702 475 hp Cummins machine. In addition the 13694. diamond forestry mulching head, owner is including a blue diamond grapple and a bucket.

94 Barko 275 - Excellent value

Contact: JOE with low at hours 13294.

Email: Joe@lumbermensco.com

at 3,500. 5.9

Phone: 888-401-6367 EXT 709 OR 801-362-2170

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam John Deere 700J LGP Item ID: 9737

2004 Bandit Beast Model 4680 -

6mo.x702 ago a new head gasket, water pump, alternator and batteries have been put on. Undercarriage is at 60-65%. 30" wide

3412 Caterpillar Diesel engine(7K hrs)

with 850 HP. 5300 hrs. Mill in pads. Log arch and winch work great. BELL Winch was barely used. A/C heat works well. Very good machine, no leaks, dry and ready to clear!

New front idlers, too. Bell Only selling because many payments 1990 Super T - too This Bell has for good condition. Just finished 10 the use it's been made of.

a brand new Duetz engine. Lever Acre clearing job, ready to work!

Contact: JOE

Email: Joe@lumbermensco.com control, 33” bar, pump and tranny Remote control. Big production Phone: 888-401-6367 EXT 709 OR 801-362-2170

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 19

John Deere 648H Grapple Skidder

Quadco 22B Hot Saw Head

“Precision Under Pressure”

Phone 315.284.4126 Item ID: 7750 Fax 315.849.2045 2012 model with very low hours, has only been used toWebsite cut softwood. www.empirehyd.com Email Contact: AUSTIN info@empirehyd.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Item ID: 14281 2011 648H 10,879 frame 30.5x32 65-70% tires, great machine, kept very well, filters changed and maintenance by john deere every 3,000 hours, runs as should, 4th machine just not being used much clean glass in cab single arch. Ready to work!

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703

‘16 Halverson H140 Skidsteer (DEMO)

VALMET 840.2 FORWARDER Item ID: 9770

2005 model with 18000 frame hours, has new trunnion, & new rear bogie brakes installed last spring. Comes with 1 set of bear paws,1 set of ice chains, & 1 set of tracks.

SUPER

‘93 Barko 180B

Item ID: 14077 Timberpro TL 745C

Item ID: 8010 Contact: Austin CLEAN Ph: MACHINE! 4,600 401-6367 hours, Runs smooth!

Has a (888) x703

full

Item ID: JW-909632 rotation hot saw (A60 degree). Fire suppression cab, A/C & Heat. All hydraulics in good working order. Tilt cab machine (70% or better).

Contact: J Williams Hydraulic cylinders, Boom and saw head pins & bushings are good!

Ph: (888) 401-6367 x701Contact: JOE

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

Cat D5G with Winch Item ID: 107

2002 model with 7000 hours. Has log arch & winch! Everything in the undercarriage was just replaced besides the rails and one front idler.

‘95 John Deere C6 Contact: AUSTIN Tree Farmer Email: Austin@lumbermensco.com Item ID: Phone: 888-401-6367 EXT 13920 703 OR 931-797-8029

L O G G I N G

Timberking 458 Forwarder Item ID: 171

Tigercat T240B Item ID: 4266

2005 model with 17,750 frame hours. Had new engine 13428 Ln. 1000 // hours PO Box and new super grip Victory grapple installed ago.

Working daily

124 2006 model with 10,500 hours, has all new hoses, along Adams Center, NY 13606 with all repacked cylinders. In excellent condition.

Contact: AUSTIN Contact: AUSTIN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703

931-797-8029

931-797-8029

‘13 KMC 2500 Track Skidder

Contact: Austin Ph: (888) 401-6367 John Deere 648E x703

Item ID: 14078 1995 pin & Contact: Austin woods Ph: (888) 401-6367 x703

model in excellent condition, every bushing are new. Has not been in the capacity!.

Item worth ID 13421.

Sam done! x702 since having $20k of work

TIMBERJACK 560C Item ID: 1593

‘83 John Deere 4850

It comes with a brand new set of tire chains, Cummins engine, tires tread 20% (at best). A/C not working. 200hrs ago it got a new head put on it. Needs some TLC, but a good machine for Item the price. ID: 14073

Contact: Austin

Contact: JOE Ph: (888) 401-6367 x703 Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709

801-362-2170 with 1700 hours, in very good

off onto a conveyor. This is a very

2007 Cat 517 tracked skidder fixed boom single arch almost new Firewood7600 Processor This isnew hard tracks and undercarriage, hours, all -new glass, bar, turbo work done, great motor, great transmission pulls hard a Chomper Model in all gears, tranny torque in good shape16 CallPDA for more pictures!

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

1999 John Deere 648G

Item ID 13644.

ItemSam ID: x702 8548

FIREWOOD PROCESSORS 11000 frame hours with new engine installed last year.

Has New turbo as well.

2010 Shop Built Wood Processor AUSTIN - Contact: It has a 353 Detroit diesel, 40 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT30703 inch insert tooth circle saw, foot

931-797-8029 379  Issue 364

automatice firewood processor

Contact: MARK

Item ID: JW-986495 with John Deere power unit with Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703 Contact: J Williams low hours. Control panel includes Ph: (888) 401-6367 x701 tach, oil pressure, water temp and

2000 Tigercat 845

amp Item gauges. logs up to 16”.

ID:Cuts 4497

chain conveyer, 8 way splitter,This oncutter has One owner comes all saw 4689 originaland frame hours, with with New 20,000lb goose neck trailer.

13916. Austin x703

Best Value Portable Log

pump installed 300 hours ago. Good Uncercarraige. Cab Item manuals and receipts. Purchased has ID AC but no Heat.

new for $32,500. Item ID 13865.

Contact: AUSTIN Email: Austin@lumbermensco.com Splitter Sam x702 Phone: 888-401-6367 EXT 703 OR 931-797-8029

- Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

LOGGING EQUIPMENT BANDIT540D 1988 John Deere

1999 Bandit 1900 Tracked Disc Item ID: 727

Rebuilt motor 1000 hours ago, Under tight center section, noatslip 13HP Honda motor. Manual start Chipper - Cat Carriage

but electronic option is

transmission, good winch. Tires are 23.1 x 26 with chains available. all around. 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Has Log Lift. Uses 4-way wedge Contact: AUSTIN adjustable to single two way.

Email: Austin@lumbermensco.com Great Well maintained. Item ID 13294.

Phone: 888-401-6367 EXT 703 OR 931-797-8029

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Sam x702

2004 Bandit Beast Model 4680 -

2008 Barko 495 ML

3412 Caterpillar Diesel engine Item ID: 7648 with 850 HP. 5300 hrs. in log deck. Has a hydraulic grapple, 11000 frame hours, and comes with csi Mill 264 Delimber. homemade processor with a 10’ chain and kicker that all

it is a tight and dry machine. runs Owner off statesgood condition.

Just finished

10

Contact: AUSTIN Acre clearing job, ready to work! of a 4 cylinder Mercedes power Email: Austin@lumbermensco.com

Remote control.

Big931-797-8029 production unit. Has a 4’ chain saw that kicks Phone: 888-401-6367 EXT 703 OR

Lumbermens  since 1986

❘

BARKO

Contact: AUSTIN Email: Austin@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 703 OR 931-797-8029

wellTracked built processor.

Item ID 13820.

CAT 517 Grapple Skidder Item ID: 3049 Sam x702

‘05 Gehl CTL 70

Item ID: 6603

 List  seLL  exchange  buy  save

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

Volvo L50D

good. in good order. 22in Itemworking ID: 14263

kohing head. head works great.

2008 Volvo L50D and 5000 hours, bucket and forks, brand new quick connect, new starter, new battery, Item Sam x702cab heat/air, clean new acID that 13185. needs charged, enclosed

glass 50% tires, works real nice. Call for more pictures 1999 Barko 160D - new engine with Contact: MARK approximately 1500 hours. Hour Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 meter dont work. The last 2 owners

702-875-2703 have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

CAT 910C

Runs Great!.

Item 13740. Sam Item ID:ID 14264

x702 910 Cat 1978 transmission rebuilt, new clutch 1k hours ago, dry, runs good, windows clean, forks, good woods machine, rife and kane tires off a combine tread is 5-6 inches deep, new battery. Call for more pictures

BELL

1990 Bell Super T - This Bell has MARK aContact: brandMark@lumbermensco.com new Duetz engine. Lever Email: Phone: 888-401-6367 EXTtranny 708 control, 33” bar, pump and

702-875-2703 ❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 21

07 Prentice 950B

“Precision Under Pressure”

Phone 315.284.4126 Item ID: 5368 Fax 315.849.2045 3000 Original hours and has a new set of 30.5 Website Goodyear tires. www.empirehyd.com Email Contact: AUSTIN info@empirehyd.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Valmet 430FXL Tracked Feller Buncher Item ID: 9495

2900 intermittent head 8013 hours tracks 24" track slides continuous rotation everything was replaced and gone through in 2014 only 749 hours since it completely gone through brand new bearings in the wheel last summer 2nd owner 2 operator machine midwest equipment & supply roadbuilders machinery & supply in Springfield, MO did the work. Call for more pictures!

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703

TIMBERJACK 380

Item ID: 2323 ‘16 Halverson H140 Has the dual 100in. Exco grapple. Transmission is Eaton 3 speed powershift.

Engine has a new Skidsteer (DEMO) injection pump. Tires tread 40% on three tires, 10% on the oneID: tire. Good machine for the price and for Item JW-909632 the conditions.

Contact: J Williams Contact: JOE401-6367 x701 Ph: (888)

Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 801-362-2170

‘93 John Barko Deere 444 180B Wheel Loader

Item ID: Item 14077 ID: 524 Contact: Austin breaks need pressure cylinder, needs seat, crack in windshield, comes401-6367 with forks and bucket.

Works great!

Ph: (888) x703 Call for more pictures Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

96’ Hydro ax 611E Item ID: 4654

‘95 John Deere C6 Tree Farmer

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘13 KMC 2500544B Track John Deere Item ID: 14230 Skidder

L O G G I N G

01’ Timberjack 460D Item ID: 345

runs good, sometimes needs starting fluid to crank, steering cylinder packing, good tires good breaks, Item ID: needs 14078 good transmission, dry, tight, doesn’t burn oil, unsure Contact: Austin on hours one tire brand new the rest 60-70%

13428 Victory Ln. // PO Box 124 Contact: AUSTIN Adams Center, NY 13606 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Ph: (888) 401-6367 x703

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703 off onto a conveyor. This is a very

1990’s John Deere 590C buckets needs bushing brand new tracks needs muffler gravel pit John Deere 590c good machine no slack in table no slack in boom

‘05 Gehl CTL 70

Contact: MARK Email: Mark@lumbermensco.com Item ID: JW-986495 Phone: 888-401-6367 708 or 702-875-2703 Contact: JEXT Williams

Ph: (888) 401-6367 x701 Item ID: 14236

chain 8 way 2014 John Deere 843K conveyer, 34x26 tires 70-80% runs assplitter, should lowon hour, Item ID: 14073 JD 22B head 20,000lb goose neck trailer.

Item ID Contact: Austin Contact: MARK 13916. Austin x703 Ph: (888) 401-6367 x703Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703 Best Value Portable Log Splitter

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS CAT 515 Grapple Skidder

Brewco Saws - Two Brewco Saws Item ID: 14257

in excellent condition. Runs great.

around 7000 hours strong winch 50% rubItem IDEverything 13644. Sam ber 28's. worksx702 as it should. Woods ready, call for video!

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor Contact: MARK -Email: It has aMark@lumbermensco.com 353 Detroit diesel, 40 Phone: 888-401-6367 EXT 708 inch insert tooth circle saw, 30 foot

702-875-2703 379  Issue 364

Firewood Processor - This is a Chomper Model 16 PDA

- Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

amp gauges. Cuts logs up to 16”.

homemade processor with a 10’

approximately 1500 hours. Hour new for $32,500. Item ID 13865.

Contact: MARK Email: Mark@lumbermensco.com meter dont work. The last 2 owners Sam x702 888-401-6367 EXT 708 or 702-875-2703 only used it to load trucks or LOGGING EQUIPMENT Phone: have

BANDIT648L ‘15 John Deere

Item ID: 14237 1999 Bandit 1900 Tracked Disc

Sam x702

2004 Bandit Beast 595 Model 4680 ‘14 Barko Item ID: 14238 3412 Caterpillar Diesel engine

2014 Barko 595 ML Magnum+ CSI 5300 264 Delimber CSI 4400 with 850 HP. hrs. 18’ Mill in ground log deck. Has a hydraulic grapple, saw 1402 hours, plated lines, hyrdraulic legs, tight, dry, runs as should, ready to work,good on pits trailer, cat kodiak grapple off condition.

Just finished 10

Acre clearing job, ready to work! of a 4 cylinder Mercedes power Contact: MARK Email: Mark@lumbermensco.com control.

Bigorproduction unit. Has a 4’ chain saw that kicks Phone: Remote 888-401-6367 EXT 708 702-875-2703

Lumbermens  since 1986

❘

Item ID:head 14232 kohing head. works great.

hours a only 300 hours in the last year 65% tracks under sprockets 1999 Barko 160D - new engine with manuals and receipts. Purchased rollers good, everything works as it should. Call for more info

but electronic option is available.

50% or better. 475 hp Cummins Contact: MARK Diesel. 7500 Hours. One owner.

Has Log Lift. Uses 4-way wedge Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703 adjustable to single two way. Great Well maintained.

Item ID 13294.

Firewood Processor - This is a

good. in good working order. 22in ‘11 John Deere 753J

John Deere 753J ID Hot saw processor tracked feller buncher, reguItem 13185.

Sam x702 One owner and comes with all2011 lar maintenance, owners manuals as well as mainatance records 7441

runs as should ready to go, dual arch, good winch

Value! PA. Item ID 12062. Sam x702

Item ID: 52342 (excellent condition.). Item ID

1995 Barko 775 B Feller Buncher automatice firewood processor Contact: WALKER Email: Walker@lumbermensco.com - Pumps recently redone. 400 hrs with John Deere power unit with Phone: 888-401-6367 EXT 707 on injection pump. always started low hours. Control panel includes

2015 John Deere 648L 44” tires 2267 hours 85-90% dry, tight, lowathour, 13HP Honda motor. Manual start Chipper - Cat Under Carriage

chain and kicker that all runs

Contact: MARK BARKO Email: Mark@lumbermensco.com 1994 Barko 160B - ElectricEXT 708 Phone: 888-401-6367

702-875-2703 knuckleboom, 30' boom, 75hp

2011 model portable loader, has 8,631 hours on it.

13238. Chris x700 Woods ready.

tach, oil pressure, water temp and

‘14 John Deere 843K

condition. Easily produces high

Item ID: 14225

2006 CTR 450 delimber, good working condition. Selling only because using bucksaw instead Sam x702 capacity!.

Item ID 13421.

grapple, 5,000 original hours.

Knuckle Boom Loader

Sam x702

Item ID: 14233

with 1700 hours, in very good

CTR 450 Delimber

motor, Rotobec continuous well built processor. Item ID 13820. 2011 437D John Deere

‘90 John Deere 590C

‘83 John Deere 4850

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

 List  seLL  exchange  buy  save

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

‘14 Case CX210C Item ID: 14239 Runs Great!. Item ID 13740. Sam

2014 Case CX210C bought 2015 grinding head 150

x702 hours has hi-flo hydraulic thumb 36” inch bucket 1100 ripper tooth 99% tracks undercarriage 2 new rollers, very dry, back up camera heat/ac radio excellent machine

BELL

1990 Bell Super T - This Bell has MARK aContact: brandMark@lumbermensco.com new Duetz engine. Lever Email: Phone: 888-401-6367 EXTtranny 708 control, 33” bar, pump and

702-875-2703 ❘

 LumbermensCO.com

** CALENDAR** Timberjack 207 Item ID: 14144

Out of frame rebuilt engine, out of frame rebuilt transmission, rebuilt reverse box. Runs great, paper work NYdocumenting STATE WOODSMEN'S FIELD DAYS all work done.

Fri, 18 August - Sun, 20 August

Contact: MARK Boonville, New York Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703 www.starwebhosting.net/woodsmen/

Cat 525

Cat 525 3304The engine, tires 65%, 13929 Tree hours brand new Started hydraulic pump. that

Hot Springs, Arkansas 2nd owner around 8000 hours, call for more info www.arkloggers.com

it All! Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 Since 1986, Lumbermens has published 702-875-2703 a monthly circular

Contact: MARK 72ND ANNUAL GREAT LAKES Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 LOGGING & HEAVY EQUIPMENT EXPO

702-875-2703

Thurs, 7 Sept - Sat, 9 Sept

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

'93 John Deere&548E MID-ATLANTIC LOGGING BIOMASS Item ID: 14184 Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Selma, North Carolina Contact: AUSTIN Email: Austin@lumbermensco.com www.midatlantic-logging-biomass­ Phone: 888-401-6367 EXT 703 expo.com/

John Williams 2004 CAT 525B (888) 401-6367 ext. 701 Item ID: 14204 j@lumbermens.co

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine

Item ID: 14187 http://www.kfia.org/

Sslack &W 125w/winch Band30.5 Mill with no leaks 32 tires 75% good working

KentuckyWoodExpo.aspx

Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

machine, with air strain conveyers

in ve1y good condition, 2432 Cuts 130 ‘07 Prentice Item ID: 14241 feet a minute also has CLT presses.

Contact: AUSTIN Email: Austin@lumbermensco.com THE888-401-6367 PAUL BUNYAN SHOW Phone: EXT 703

Contact: AUSTIN DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 703

has been rebuilt, it has a 24foot in Contact: MARK feed deck 20 foot out feed deck Email: Mark@lumbermensco.com Phone: 888-401-6367 708 with 44 inch wheels, andEXT all the

702-875-2703 bells and whistles, its a production

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

'04 John Deere 700H Lexington, Kentucky

MARKETING DIRECTOR

BANDMILLS & HEADSAWS

dry tight everything on sprockets roller idlers chains all tracks and undercarriage is 1 year old and 90% w/winch, winchBand has reverse 6-way- Roughly blade screens Danckaert Resaw and ropes open cab taken good care of 4900.7 hours.

10 hours on this machine since it

** INFO LINK**

2007 2432 prentice grapple skidder- 14000 hours motor Item IDhours 13876.

Austin x703 has 4200 crate motor new trans new back glass real tight 1200 hours on center pins cradle has just little

machine Caterpillar generator - Low hours Contact: MARK on the mill, electronic computer Set Email: Mark@lumbermensco.com Phone:1/2" 888-401-6367 works,1 or 2" band,EXT 22ft.708 track

702-875-2703 Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES P.O. Box 170 • Prentice WI 54556-0170 • 800-243-5438

2010 Cardinal HD Carriage www.multitekinc.com • sales@multitekinc.com

Carriages (Sawmill) - Cardinal

Multitek Firewood Processors

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Carriage line it includes carriage

with onboard log turners, carriage drive, hyd pac for carriage,

Increase Your Productivity and Profitability Baker ...................................... 5, 7 Menominee Saw ..................... 29 sawyers cab, computer controls,

Quality Equipment to Reduce your Labor Costs cabinet with electronic drives for Inc. ..............

30 Bell's Machining •.....................

27 Metal Detector's • Circular Saw or Bar & Chain Models carriage knees, husk including Brute Force Mfg. ..................... 31 Midwest Sharpening.............. 26 • 7 Models to Choose From 48" bottom saw and 36" top saw Morbark ..................................... 9 • Production Ratings up to 5.5 Full Cords Per Hour

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

STACKING RAC Made in the U.S.A.

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 23

L O G G I N G

'03FOREST 670 Hydro-Ax SOUTHWEST PRODUCTS EXPO Item-ID: 14138 Fri, 25 August Sat, 26 August

Item ID: 14155

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at '06 John Deere 700J www.LumberMB\ISmagazine.com Item ID: 14194

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

'97 Hydro AX-411 EX Bar Saw Head

‘16 Halverson H140 Skidsteer (DEMO) 04’ TimberKing 540DS

Item ID: 98754

Heat works. Air needs charging.

Tires inc., great shape tires chains to go with it bear claws.

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

2011 CAT 525C

Item ID: JW-909632 Item ID: 14205 Contact: J Williams Contact: Ph: (888)AUSTIN 401-6367 x701

Item ID: 14203

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘93 Barko 180B

Item ID: 14077 Contact: Austin Prentice Ph: 98’ (888) 401-6367410E x703 Item ID: 14206

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘02 Prentice 490 Item ID: 14047

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

L O G G I N G

‘13 KMC 2500 Track Skidder

‘89 Timberjack 380A

Item ID:ID: 14078 Item 14039 Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703

51813428 CAT Grapple Victory Ln.Skidder // PO Box 124

Item ID: 14036NY 13606 Adams Center, Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

off onto a conveyor. This is a very

well built processor. Item ID 13820.

John Deere Cab

Sam x702 Item ID: 6679

Firewood - This AC, FD 55 Cutting Processor Head, 70% TiresisVery Good Condition, 3500 Hours. a Chomper Model 16 PDA

‘05 Gehl CTL 70

firewood processor Contact:automatice SAM

Email: Sam@lumbermensco.com Item ID: JW-986495 with John Deere power unit with Phone: 888-401-6367 EXT 702 Contact: J Williams low hours. Control panel includes Ph: (888) 401-6367 x701

‘95 John Deere C6 Tree Farmer Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Mid 90’s Husky Brute 335XL

ID:13421.

14088Sam x702 capacity!.Item Item ID

BARKO Contact: AUSTIN Email: Austin@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 703 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

Caterpillar

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 with 1700 hours, in very good

lbs, HP,and New Firestone chain conveyer, 8 way splitter,17,000 on One100 owner comes with all23 x 126, Power Shift New Hyd Pump, New 20,000lb goose neck trailer. Item ID Shaft, manuals receipts.

Purchased Winch Newand Hyd Park Brake.

13916. Austin x703 for $32,500. Item ID 13865.

Contact:new SAM Email: Sam@lumbermensco.com Best Value Portable Log Splitter Sam x702 Phone: 888-401-6367 EXT 702 - Small manufacturer in PA has LOGGING EQUIPMENT

on injection pump. always started Item ID: 2476 good. in good working order. 22in Product no. 4194, Cab with cold AC, kohing head. head works great.

SH56 Bunching Head, 28L-26 Tires At 60%, Center Tight, Runs Great, Item ID 13185. Sam x702 Machine Has New Injectors, New Fan Motors, 1999 Barko On 160D new engine And Clutch AC, -11,111 Hours. with approximately Contact: SAM1500 hours. Hour Email:dont Sam@lumbermensco.com meter work. The last 2 owners Phone: 888-401-6367 EXT 702 have only used it to load trucks or

quality chips with patented ‘Cone’

Handles logs up to 32”. Uses

delimber, grapple has been rebuilt.

‘83 John Deere 4850

‘00ID: Timberjack 1110 Item 14073 Item ID: 14033 Contact: Austin Ph: (888) 401-6367 x703 Contact: AUSTIN

condition. Easily produces high

drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

Johncondition.

Deere Runs 540B in excellent great.

Item ID: 0908 Item ID 13644. Sam x702 All FIREWOOD Refurbished!PROCESSORS 4K Original Hours!

2010 Shop Built Wood Processor SAM - Contact: It has a 353 Detroit diesel, 40 Email: Sam@lumbermensco.com inch insert tooth circle saw, 30 foot Phone: 888-401-6367 EXT 702 379  Issue 364

tach, oil Deere pressure, 540D water temp and John Item ID: 5613 amp gauges.

Cuts logs up to 16”.

made the best valued log splitter.

John

BANDIT Deere 437D Log Loader Item ID: 8834 1999 Bandit 1900 Tracked Disc

13HP Honda motor. Manual start - Cat Under Carriage Product Chipper No. 4204, Extra Clean, 10K at Hours, Stock Photo Delimber but electronic option is available.

50% or better. 475 hp Cummins Contact:Diesel.

SAM 7500 Hours. One owner.

Has Log Lift. Uses 4-way wedge Email: Sam@lumbermensco.com adjustable to single two way. Great Well maintained. Item ID 13294.

Phone: 888-401-6367 EXT 702 Value! PA. Item ID 12062. Sam x702 Sam x702 Firewood Processor - This is a

homemade processor with a 10’

2004 Bandit Beast425 Model 4680 2005 Timbco EXL Item ID: 14275 3412 Caterpillar Diesel engine

with 2015 sp761lf head 1000 hrs. hours Mill on head withharvester 850 HP. 5300 inand 2015 log deck. Has a hydraulic grapple, dasa 5 computer system frame hours 10,900 Undercarriage 75% no leaksgood dry, rebuilt final drive the other final drive10 is new, chain and kicker that all runs off condition.

Just finished engine has ECM, new swing drive gear box, new implement pump

of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that

Lumbermens  since 1986

❘

Acre clearing job, ready to work!

Contact: MARK Email: Mark@lumbermensco.com Remote control. Big production kicks Phone: 888-401-6367 EXT 708 OR 702-875-2703

 List  seLL  exchange  buy  save

as a backup as needed. Has a CTR Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

96’ John BELL Deere 643D

Item ID: 14207 1990 Bell Super T - This Bell has Contact: AUSTIN a brand new Duetz engine. Lever Email: Austin@lumbermensco.com control, bar, pump and Phone:33” 888-401-6367 EXTtranny 703 ❘

 LumbermensCO.com

** CALENDAR** Case 85XT Skid Steer Item ID: 14149

Open Cab, Top Fork And Bucket Attachments.

95% Front Tires 60-70% Rear Tires.

NY STATE WOODSMEN'S FIELD DAYS Contact: MARK Fri, 18 August - Sun, 20 August Email: Mark@lumbermensco.com Boonville, New York Phone: 888-401-6367 EXT 708

702-875-2703 www.starwebhosting.net/woodsmen/

FORESTBoom PRODUCTS EXPO '96 410D SOUTHWEST Prentice Knuckle

The Tree Excellent Condition. One owner machine comes with a bucket that and forksStarted currently has around 3000 hours. it All!

Hot Springs, Arkansas Turntable is real loose, needs bearings and hydraulic is seized up, 6 cylinder John Deere diesel. parts or fixer. Parts in good shape! www.arkloggers.com

Item ID: 14145

Fri, ID: 25 14151 August Item

Contact: 72NDMARK ANNUAL GREAT LAKES Email: Mark@lumbermensco.com LOGGING & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 708 OR 702-875-2703

Contact: MARK Email: Mark@lumbermensco.com Phone: EXT 708 Since 888-401-6367 1986, Lumbermens

702-875-2703

has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

'15 CAT 521B Reduced Price MID-ATLANTIC LOGGING & BIOMASS Item-ID: 14150 Fri, 15 Sept Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat,720B 16 Sept TIGERCAT

Lexington, Kentucky Item ID: 542 http://www.kfia.org/ This feller buncher comes with a high speed "Quadco" cutter.

Odometer shows 7000hrs. 500hrs ago a new motor (rebuilt) KentuckyWoodExpo.aspx was installed. 90% tires tread. The A/C doesn’t work. It's been

(888) 401-6367 ext. 701 Item ID: 14208 j@lumbermens.co

parked for about 4-5 months. READY TO GO!!

Contact: AUSTIN DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 703

THE PAUL BUNYAN SHOW Contact: JOE Email: Joe@lumbermensco.com Fri, 6 Oct - Sun, 8 Oct Phone: 888-401-6367 EXT 709 OR 801-362-2170 Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Less than 300 hours of use! Carolina Brand new. Tracks at Selma, North 99% excellent track cutter. www.midatlantic-logging-biomass­ Contact: MARK expo.com/ Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703

MARKETING DIRECTOR International TD15 John Williams Bull Dozer

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

- Sat, 26 August

** INFO LINK**

'90 Valmet 544H

BANDMILLS & 14146 HEADSAWS Item ID: Danckaert Resaw - Roughly motor runs Band excellent, comes with 40%

chains, used just a couple months ago to

10 thishours, machine it cut hours trees. on 10-12k front since tires 60-70% rear 90% turbo is lagging. Harvesting head

has been up. rebuilt, it has 24foot in is messed A couple leaks anot too serious feed deckMARK 20 foot out feed deck Contact: Email: Mark@lumbermensco.com

with 44888-401-6367 inch wheels, and Phone: EXT 708all the

702-875-2703

bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough

pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine

Danzco Delimber inPT20H ve1y good condition, Cuts 130 Item ID: 14134 feet a minute also has CLT presses.

Excellent condition, motorx703 rebuilt about Item ID 13876.

Austin 300 hours ago less than 2700 original Shours & W 125 Band Mill with Caterpillar generator - Low hours Contact: MARK on the mill, electronic computer Set Email: Mark@lumbermensco.com Phone:1/2" 888-401-6367 works,1 or 2" band,EXT 22ft.708 track

702-875-2703 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

L O G G I N G

'13 Komatsu WA200 PZ Wheel Loader

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 25

“Precision Under Pressure”

Item ID: 0998

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

One Owner, With Less Than 4K Hours. Excellent Undercarriage, Joystick Controls. Everything Working On It. Best Bell For The Price.

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘16 Halverson H140 '96 CAT 515 Log Skidder

John Deere 753J

Item ID: 7534

Skidsteer (DEMO)

Item ID: 14258

REDUCED PRICE! Single Arch Glass Cab, 28L X 26 Item ID: JW-909632 Tires 50/40%, New Bear Paws On Front, Ice Chains Rear, Esco 84’ Grapple, New Cutting Edge On Blade, Contact: J Williams All Cylinders Just Rebuilt, 12,800 Hrs.

2013 John Deere 753J with Quadco 360 hotsaw head 3,215 hours. Everything runs and works as it should

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

Ph: (888) 401-6367 x701

Contact: SAM • Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: ‘80 (888) 401-6367 John Deerex703 550 Item ID: 14037

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

'07 John Deere 848H Grapple Skidder Item ID: 6566

Product No. 1876, 11,066 Frame Hours, New Engine At 8,800 Hours, Dual Arch Winch, Chains On All Four Tires, Working Daily In Woods.

‘95 John Deere C6 Tree Farmer

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Item ID: 13920 Contact: Austin Ph: (888) x703 90’ CAT 401-6367 213 Excavator

L O G G I N G

‘13 KMC 2500 Track Skidder

‘14 B66TD Rotochopper

Item ID: ID: 14078 Item 13838 Contact: Austin Contact:Ph: SAM (888) 401-6367 x703

12’ JohnVictory Deere 437D 13428 Ln. // PO Box 124

Item ID: 14209 Adams Center, NY 13606 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

off onto a conveyor. This is a very SamItem x702 ID: 7698

grapple, 5,000 original hours.

Firewood - This Product No. 1707, 3304 CATProcessor Engine 1-1/2 Yearsis Old, New Oil Cooler, Rebuilt Radiator, New Injector Pump, New a Chomper Model 16 PDA Hydraulic Pump, New Main Lines, New Arch, New Blade Plate, Good Air Brakes. automatice firewood processor

‘05 Gehl CTL 70

10’ John Deere 648H

Item ID: 14073 Item ID: 14210 Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 with 1700 hours, in very good condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws Franklin 2005 Q70 Item ID: 5579 in excellent condition. Runs great.

Item 13644.New SamRubber, x702 Heat/ LowID Hours!

ACFIREWOOD Takes No Oil. Great Running PROCESSORS Skidder.

2010 Shop Built Wood Processor

SAM - Contact: It has a 353 Detroit diesel, 40 Email: Sam@lumbermensco.com inch insert tooth circle saw, 30 foot Phone: 888-401-6367 EXT 702 379  Issue 364

Item ID: JW-986495 Contact: SAMwith • Email: JohnSam@lumbermensco.com Deere power unit with EXT 702 Contact: J Williams Phone: 888-401-6367 low hours. Control panel includes Ph: (888) 401-6367 x701 tach, oil650H pressure, water temp and John Deere Forestry Dozer Item ID:Cuts 14274 amp gauges. logs up to 16”.

roughly 8500 and hours,comes with good winch chain conveyer, 8 way splitter,2004 on 650HOne owner with all new cable, 35- 40%, 6 way blade, caged cab, forestry package, woods log arch, new gasket 500 hrs. ago, new 20,000lb goose neck trailer. Item ID ready, manuals andhead receipts.

Purchased linkage in blade, family owned machine.

13916. Austin x703

Best Value Portable Log

new for $32,500. Item ID 13865.

Contact: MARK Email: Mark@lumbermensco.com Splitter Sam x702 Phone: 888-401-6367 EXT 708 OR 702-875-2703

- Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

LOGGING EQUIPMENT BANDIT '92 CAT 518

Item ID: 14198 1999 Bandit 1900 Tracked Disc

1992 CAT 518 6000 original frame hours! Carriage Rebuilt motor 13HP Honda motor. Manual start Chipper - Cat Under atand transmission with less than 1000 hours, excellent winch, great machine.

Callor forbetter. video 475 hp Cummins but electronic option is available.

50%

Diesel.

7500 Hours. One owner.

Has Log Lift. Uses 4-way wedge Contact: MARK Email: Mark@lumbermensco.com adjustable to single two way. Great Well maintained.

Item ID 13294.

Phone: 888-401-6367 EXT 708 or 702-875-2703 Value! PA. Item ID 12062. Sam x702 Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple,

2004 Bandit Beast Model 4680 3412 engine ‘97Caterpillar TimbcoDiesel 425D ID:5300 13950 with Item 850 HP. hrs. Mill in

chain and kicker that all runs off condition. Just finished 10 Contact:good AUSTIN Email: Austin@lumbermensco.com Acre clearing job, ready to work! of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 Remote control. Big production unit. Has a 4’ chain saw that kicks

Lumbermens  since 1986

❘

CurrentlyItem has ID 3316 hours. capacity!.

13421.

Sam x702

BARKO Contact: AUSTIN Email: Austin@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 703 knuckleboom, 30' boom, 75hp

Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

well built processor.

Item ID 13820.

'94 CAT 518C Cable Skidder

‘83 John Deere 4850

Item ID: 14110

 List  seLL  exchange  buy  save

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item‘05 ID 13185.

Sam x702608B Timberjack Item 13898 1999 Barko 160DID: - new engine with

Contact: SAM1500 hours. Hour approximately Email: Sam@lumbermensco.com meter dont work. The last 2 owners Phone: 888-401-6367 EXT 702 have only used it to load trucks or as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

John 648D Grapple Skidder

Runs Great!.

Item 13740. Sam Item ID:ID 14265

3 tires at 65% 1 at 25% runs great, good engine, new x702

pump on front, new valve bank, cylinders redone, big winch, grapple is tight, center pins are okay, will need to be replaced down the road it's a 4th spare machine.

Call forBell more pictures 1990 Super T - This Bell has

BELL

MARK aContact: brand new Duetz engine. Lever Email: Mark@lumbermensco.com

Phone: 888-401-6367 EXT 708 control, 33” bar, pump and tranny

702-875-2703

❘

 LumbermensCO.com

** CALENDAR** 93’ Prentice 210 Item ID: 14216

AUSTIN NYContact: STATE WOODSMEN'S FIELD DAYS Email: Austin@lumbermensco.com Fri, 18 August - Sun, 20 August Phone: 888-401-6367 EXT 703

Boonville, New York www.starwebhosting.net/woodsmen/

16’The CATTree 545D

Item ID:Arkansas 14217 Hot Springs, www.arkloggers.com Contact: AUSTIN

Item 14211 thatID: Started

it All! Contact: AUSTIN Email: Austin@lumbermensco.com Since 1986, Lumbermens Phone: 888-401-6367 EXT has 703

Email: Austin@lumbermensco.com 72ND ANNUAL GREAT LAKES Phone: 888-401-6367 EXT 703

LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

07’ Tigercat MID-ATLANTIC LOGGING724E & BIOMASS Item ID: 14218 Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing MID-ATLANTIC

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

Timberjack 230 Lexington, Kentucky

MARKETING DIRECTOR

Item ID: 1977 http://www.kfia.org/ KentuckyWoodExpo.aspx Contact: AUSTIN

JohnDeere Williams843K 12’ John (888) 401-6367 ext. 701 Item ID: 14212 j@lumbermens.co

Email: Austin@lumbermensco.com Phone: EXT 703 OR THE888-401-6367 PAUL BUNYAN SHOW 931-797-8029 Fri, 6 Oct - Sun, 8 Oct

Contact: AUSTIN DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 703

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Contact: AUSTIN Selma, North Carolina Email: Austin@lumbermensco.com www.midatlantic-logging-biomass­ Phone: 888-401-6367 EXT 703 expo.com/

Now One Phone Puts You Austin Woods in(888) Touch 401-6367with ext. 703 ThE Single Source austin@lumbermens.co INFO for all your Sawmill Needs!

MAILING ADDRESS

**

B & B Mfg. ............................... 18 P.O. Box 1916 Corley Columbia, TNSawmill 38402-1916maChinery B. H. Payne .............................. 16 (888) 401-6367Berry Carriage DriveS Tyrone

Cambridge, Ohio www.ohioforest.org

BANDMILLS & HEADSAWS

2004 Timbco 445EXL

DanckaertItem BandID: Resaw - Roughly 14170 10 hours on this machine since it 85% Undercarriage. has been rebuilt, it has a 24foot in Contact: AUSTIN feed deck 20 foot out feed deck Email: Austin@lumbermensco.com with 44 inch wheels, andEXT all the Phone: 888-401-6367 703 bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703

John S &‘80 W 125 BandDeere Mill with540B Item ID: 11345 Caterpillar generator - Low hours Contact: on the mill,AUSTIN electronic computer Set Email: Austin@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

LINK** M&F Gauge ............................. 28 Meadows Mill, Inc. ................ 33

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage,

Menominee Saw ..................... 29

sawyers cab, computer controls,

May be sent to­ Bell's Machining ..................... 27 morris@lumbermens.co Carriage Linear & Set Shaft

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

(AIM) ........ 36 Send address changes to:Drives & Buck Tyrone-Berry Carriage Parts Equipment • Headrig Slabbers Lumberman's Exchange Log Turners • Bandmills & Linebar Resaw Systems Corley Mfg .............................. 32 P.O. Box Board 1916 & Gang Edgers • Trimmers Columbia, TN 38402 CRD Metalworks .................... 25

Item 13851 Mor barkID: .....................................

9

The Exchange Most Complete Line of Sawmill .............. 17 The Lumberman's is CW Mill-ArmorHog published monthly by Machinery Woods Since 1905!

CW Mill-Hogzilla ................... 15 Publishing, P.O. Box 1916, Columbia, TN 38402. All rights Dyna ProductsOperation ........................ 35 Single Machine or Complete Turn-Key reserved.

All editorial/ advertorial submissions are used at the More Production & Profit isEmpire Only Hydraulics One Call ...................

Away 8 discretion of the publisher and may For Parts, Service & Sales be edited for purposes of clarity Great Lakes Mfg. .................... 34 and space. Although all efforts have Hahn Machinery ...................... 3 been made to ensure accuracy of content submitted by advertisers Hurst Boiler ............................. 14 and writers, the Lumberman's Exchange, its principles and Iron Bull ................................... 21 associates, are not held liable for errors or omissions. Reproduction, Kilgore Saw ............................. 22 in whole or part, is prohibited with­ Lignomat ................................. 24 out written consent. www.corleymfg.com • sales@corleymfg.com ©2017 Woods Publishing

Rotochopper............................ 40

AD SUBMISSIONS lewiS

Baker ......................................

ConTrolS opTimizaTion 5, 7 Brute Force Mfg. ..................... 31

Lewis Controls “Electronics for sawmills by sawmillers” POSTMASTER

mfg

Call (423) 698-0284 CORLEY

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

‘03 John Deere Midwest Sharpening.............. 26 748GIII Contact: Sam Ph: (888) 401-6367 x702

Multitek ................................... 12 Piper's Saw Shop.................... 13 Row Electric ............................ 20 Sawmill Exchange .................. 11 Select Sawmill ......................... 19 Smith Sawmill ........................... 4 The Paul Bunyan Show ......... 39 Thomas Industrial Controls..... 10 Union Grove Saw & Knife.. 2, 37

‘89 Cat D4H LGP

Item ID: 13999 Contact: Austin 48" bottom and 36" top saw Ph: (888)saw 401-6367 x703

carriage knees, husk including

STACKING RAC ‘04 Hood Loader 28000

Item ID: 13971 Contact: Austin Ph: (888) 401-6367 x703

Universal Refiner ................... 23

2004 John Deere 648G III

WoodMizer ................................ l

Item ID: 13878

 SELL YOUR EQUIPMENTContact: TODAY ❘ Austin  24/7 SUPPORT l§ TODAY 0 SUPPORT

Ph: (888) 401-6367 x703

hours, 36” pads. It does have some www.BakerProducts.net 800.S48.6914 I S73.663.7711 small leaks. Owner is going back

rubber cutters because ❘ toL!  (888)tired 401-MENS NO. his 27 401-MENS job has changed. Item ID 13898.

Sam x702

L O G G I N G

SOUTHWEST FOREST PRODUCTS EXPO Fri, 2011 25 August Sat, 26 August John- Deere 648H

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘97 Timberjack 240D Item ID: 13917

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

CAT 525 Cable Skidder

‘16 Halverson H140 ‘93 John Deere 548E Skidsteer (DEMO) Item ID: 14083

Item ID: 14266

1997 CAT 525 9300 20% real tight center pins, dry no leaks, good shape, motor redone less than 1000 hours ago, transmission good, new cable, needs tires. Call for more pictures

Item ID: JW-909632

Contact:Contact: AUSTIN J Williams Email: Austin@lumbermensco.com Ph: (888) 401-6367 x701 Phone: 888-401-6367 EXT 703

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

‘9301’ Barko 180B Ponsee Bison Item ID: 14077 Forwarder Contact: Austin Item ID: 14109 Ph: (888) 401-6367 x703

Comes with a set of tracks.

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘94 Caterpillar 320 Item ID: 13936

L O G G I N G

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘13 KMC 2500 Track Skidder 2012 Cat D6K XL

Item ID: ID: 14078 Item 14169 Contact: Austin Contact:Ph: AUSTIN (888) 401-6367 x703

‘11 Tigercat 620D 13428 Victory Ln. // PO Box 124 Item ID: 13929 Adams Center, NY 13606 Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam611 x702Ex-Hydro Ax ‘98

Firewood ItemProcessor ID: 13948- This is

‘05 Gehl CTL 70

‘83 John Deere 4850

‘1414073 CAT 535C Item ID: Item ID: 13840 Contact: Austin Contact: SAM Ph: (888) 401-6367 x703

Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 with 1700 hours, in very good condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

PROCESSORS ‘04FIREWOOD John Deere 648G III

13878 2010 ShopItem BuiltID: Wood Processor

AUSTIN -Contact: It has a 353 Detroit diesel, 40 Email: Austin@lumbermensco.com inch insert tooth circle saw, 30 foot Phone: 888-401-6367 EXT 703 379  Issue 364

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

a Chomper Contact: AUSTIN Model 16 PDA Email: Austin@lumbermensco.com automatice firewood processor Phone: 888-401-6367 EXT 703 with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and

‘99 EX ampHydro-Ax gauges. Cuts 511 logs up to 16”.

Item ID: One owner and13799 comes with all

chain conveyer, 8 way splitter, on

Contact: SAM and receipts. Purchased 20,000lb goose neck trailer. Item ID manuals Email: Sam@lumbermensco.com 13916. Austin x703 new for $32,500. Item ID 13865.

Phone: 888-401-6367 EXT 702 Best Value Portable Log Splitter Sam x702

LOGGING EQUIPMENT BANDIT 1999 Bandit 1900 ‘05 TigercatTracked 230B Disc

- Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

Item ID: Under 13911Carriage at Chipper - Cat

13HP Honda motor. Manual start

but electronic option is available. or better. 475 hp Cummins Contact:50% AUSTIN Email: Austin@lumbermensco.com Diesel. 7500 Hours. One owner.

Has Log Lift. Uses 4-way wedge Phone: 888-401-6367 EXT 703 adjustable to single two way. Great Well maintained. Item ID 13294.

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple,

Sam x702

2004 Bandit Beast Model 4680 -

Caterpillar Diesel engine 90's3412 Model Timberjack 240A ID:5300 14111 with Item 850 HP. hrs. Mill in

chain and kicker that all runs off condition. Just finished 10 Contact:good WALKER

Email: Walker@lumbermensco.com Acre clearing job, ready to work! of a 4 cylinder Mercedes power Phone: 888-401-6367 Remote control.EXT Big707 production unit. Has a 4’ chain saw that kicks

Lumbermens  since 1986

❘

 List  seLL  exchange  buy  save

‘95 John Deere C6 Tree Farmer

ItemTimberjack ID: 13920 240D Contact: Austin Item ID: 3443 Ph: (888) 401-6367 x703dry ma240D gearmatic winch, winch rebuilt recently,

chine, tight pins in blade and centers, engine needs govenor adjusted, heavy duty transfer case, 2x50% 2x40%, 32 tires Great machine ready to work! Call for more pictures

capacity!. Item ID 13421. Sam x702 Contact: MARK BARKO Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 1994 Barko 160B - Electric

702-875-2703 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID‘89 13185. x702 CATSam D4H LGP Item ID: 13999 1999 Barko 160D - new engine with

Contact: AUSTIN approximately 1500 hours. Hour Email: Austin@lumbermensco.com meter dont work. The last 2 owners Phone: 888-401-6367 EXT 703 have only used it to load trucks or as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

‘85 John BELL Deere 440D

Item ID: 12453 1990 Bell Super T - This Bell has AUSTIN aContact: brand new Duetz engine. Lever Email: Austin@lumbermensco.com control, 33” bar, pump and tranny Phone: 888-401-6367 EXT 703 ❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

'01 John Deere 648G3 Item ID: 90899

The Tree

Email: Sam@lumbermensco.com Since 1986, Lumbermens Phone: 888-401-6367 EXT has 702

published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Contact: SAM 72NDContact: ANNUALAUSTIN GREAT LAKES Email: Sam@lumbermensco.com Email: Austin@lumbermensco.com LOGGING & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 702 Phone: 888-401-6367 EXT 703

has been rebuilt, it has a 24foot in Contact: MARK feed deck 20 foot out feed deck Email: Mark@lumbermensco.com Phone: 888-401-6367 708 with 44 inch wheels, andEXT all the

702-875-2703 bells and whistles, its a production

HotBucksaw Springs, Arkansas & Delimber www.arkloggers.com Item ID: 14213

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

PUBLISHER

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co John Deere 548G3

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/ '11 John Deere 85D Item ID: 14158

KENTUCKY WOOD EXPO wasn’t purchased or used until 2015 was a “leftFri, 15 Sept - Sat, 16 Sept over” under 1k hours, 8’ wide blade, backhoe, 3

Williams This skidder has John 4700 original hours and comes with a winch. Cab has heat & ac, tires are ext.

23.1 26.701 In excellent (888) 401-6367 condition!

‘03 John Deere 748GIII

Contact: AUSTIN DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 703

931-797-8029

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Item ID: 13851

j@lumbermens.co

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 JOHN sam@lumbermens.co

Lexington, buckets 24”, 30”,Kentucky 36” one owner longer boom!

LIKE NEW http://www.kfia.org/ KentuckyWoodExpo.aspx

Contact: MARK Email: Mark@lumbermensco.com THE PAUL SHOW Phone:BUNYAN 888-401-6367 EXT 708 Fri, 6 Oct 702-875-2703 - Sun, 8 Oct

DEERE 648G Series III

Cambridge, Ohio www.ohioforest.org

AD SUBMISSIONS

** INFO LINK**

POSTMASTER

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ......................................

5, 7 Item ID: 9450

Menominee Saw .....................

29 '94 John Deere 548E Item ID: 14185 Metal Detector's Inc. .............. 30 Contact: AUSTIN Midwest Sharpening.............. 26 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 7039 Mor bark .....................................

Brute Force Mfg. ..................... 31

P.O. Box 1916 Columbia, TN 38402

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

Bell Ultra C

The Lumberman's Exchange is ID: 1025 CWItem Mill-ArmorHog .............. 17 published monthly by Woods 1996 modelCW withMill-Hogzilla Joystick control................... and Koehring 15 Publishing, P.O. Box 1916, Head.

Columbia, TN 38402. All rights Dyna Products ........................ 35 reserved. All editorial/ advertorial Contact: AUSTIN submissions are used at the Email: Austin@lumbermensco.com Empire Hydraulics ................... 8 discretion of the publisher and Phone: may 888-401-6367 EXT 703 OR 931-797-8029 be edited for purposes of clarity Great Lakes Mfg. .................... 34 and space. Although all efforts have Hahn Machinery ...................... 3 been made to ensure accuracy of 1991 Timberjack 450B content submitted by advertisers Item ID: .............................

1826 Hurst Boiler 14 and writers, the Lumberman's Exchange, its principles and New pins & bushings. Tight skidder all around.

Iron Bull ................................... 21 associates, are not held liable for Ready to drag some wood. errors or omissions. Reproduction, Kilgore Saw ............................. 22 Contact: AUSTIN in whole or part, is prohibited with­ Email: Austin@lumbermensco.com Lignomat ................................. 24 out written consent.

Phone: 888-401-6367 EXT 703 OR 931-797-8029 ©2017 Woods Publishing

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID532 13876.CAT Austin x703 Feller

Buncher S & W 125 Band Mill with Item ID: 14079 Caterpillar generator - Low hours Contact: on the mill,AUSTIN electronic computer Set Email: Austin@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400

Carriages (Sawmill) - Cardinal

M&F Gauge ............................. 28

Contact: AUSTIN Buck Equipment (AIM) ........ 36 Send address changes to: Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029 Lumberman's Exchange

is supported on both sides. This

2010 Cardinal HD Carriage

B & B Mfg. ............................... 18

May be sent to­ 1989 Model with Bell's Machining 27 factory 5.9 Cummins ..................... engine, power shift morris@lumbermens.co transmission, Hercules winch. Working daily.

pressure guides. Top Casting wheel

CARRIAGES & DRIVES

Dual arch, tires tread 30%, 30.5 This was a repo from in Alabama.

TIMBERJACK 230A

it includes two sets of Mcdonough

hours ready to run. Item ID 13434.

Austin Woods A/C not working properly. Owner bought it from them and used it about 18mo. Nothing wrong with it. Grapple needs new packing (888) 401-6367 ext. 703for ($600 fix). Good skidder, reliable! austin@lumbermens.co Contact: JOE P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

that go up and down, with airbags,

Sam x702

Item ID: 746

Joe@lumbermensco.com MAILING ADDRESS Email: Phone: 888-401-6367 EXT 709 OR 801-362-2170

grapple rebuilt, w/winch single arch tight ma10 hours on this machine since it chine 60% rear 40% front 28l's

Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls,

06’ Franklin Q80 for cabinet with electronic drives Item ID: 14214 carriage knees, husk including Contact: AUSTIN 48" bottom saw and 36" top saw Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

STACKING RAC

Rotochopper............................‘05 40 Transport Trailers Custom Log Pup Item ID: JW-538174 Row Electric ............................ 20 Contact: SAM Sawmill Exchange ..................Email: 11 Sam@lumbermensco.com Phone: 888-401-6367 EXT 7021 Select Sawmill ......................... 19 Smith Sawmill ........................... 4 The Paul Bunyan Show ......... 39

'92 CAT 518C Cable Skidder

Thomas Industrial Controls..... 10

Item ID: 14107

Union Grove Saw & Knife.. 2, Hard 37 to Find “C” model in great shape!

Universal Refiner ................... 23 Contact: AUSTIN Email: Austin@lumbermensco.com www.BakerProducts.net WoodMizer ................................ l Phone: 888-401-6367 703 800.S48.6914 EXT I S73.663.7711

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 29

L O G G I N G

Item ID:DIRECTOR 985 MARKETING

new main drive shaft, motor rebuilt 200 or so

machine, with air strain conveyers

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

ADVERTISING SALES

Item ID: 14199

BANDMILLS & HEADSAWS

Danckaert Band - Roughly hours ago, rebuilt fuel Resaw injector, hydraulic rebuilt,

Item ID: 13927

Contact: SAMit All!

John Deere 648D

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August Prentice 384 with

‘11 Tigercat 845C

Excellentthat Condition Low Price!

Started

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

John Deere 850J Dozer

'12 CAT 573C Feller Buncher

Right around 3500 hours, excellent condition, brand new undercarriage, sprockets, and rollers. Very well maintained. Call for more info!

with SC-57 head, just over 2400 hours, dry, tight, very well maintained, everything works and operates as it should.

Call for more info

Item ID: 14192

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

Item ID: 14193

'94 Barko 160 Knuckleboom Item ID: 14186

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632

‘93 Barko 180B

Item ID: 14077 Contact: Austin ‘04 JCB 441 Wheel Ph: (888) 401-6367 Loader x703 Item ID: 13888

Contact:MARK J Williams Contact: Email: Mark@lumbermensco.com Ph: (888) 401-6367 x701 Phone: 888-401-6367 EXT 708

702-875-2703

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘08 John Deere 335C Item ID: 14089

‘95 John Deere C6 Tree Farmer

L O G G I N G

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘99 Case 850G Long 13428 Victory Ln. // PO Box 124 ‘89 Timberjack 230A Track Dozer Item ID: 13909NY 13606 Adams Center,

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Item ID: 13885

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

off onto a conveyor. This is a very

well built processor. Item ID 13820.

“13 KMC 2500 Tack Skidder Item ID: 14078

Contact: AUSTIN ‘05 Gehl CTL 70 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Item ID: JW-986495

‘83 John Deere 4850

Contact: J Williams Ph: (888) 401-6367 x701

'09 John Deere 753J Buncher ID: 14106 chainItem conveyer, 8 way splitter, on

Item ID: 14073 Contact: Austin Contact:20,000lb AUSTINgoose neck trailer. Item ID Email: Austin@lumbermensco.com 13916. Austin x703 Ph: (888) 401-6367 x703 Phone: 888-401-6367 EXT 703 Best Value Portable Log Splitter

with 1700 hours, in very good

condition. Easily produces high

- Small manufacturer in PA has

made the best valued log splitter.

‘00 Timbco quality chips with patented ‘Cone’ Handles 445D logs up to 32”. Uses Item ID: 14096 drum design. Can easily load 42’ 13HP Honda motor. Manual start

Contact: AUSTIN vans and produce 6 - 8 loads per but electronic option is available.

Email: Austin@lumbermensco.com day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge Phone: 888-401-6367 EXT 703 EDGERS & GANGS adjustable to single two way. Great Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor 2015 Cat 525Dwith a 10’ ItemHas ID: a14167 log deck. hydraulic grapple,

Contact:chain AUSTIN 2010 Shop Built Wood Processor and kicker that all runs off - It has a 353 Detroit diesel, 40Email: Austin@lumbermensco.com of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 inch insert tooth circle saw, 30 foot unit. Has a 4’ chain saw that kicks 379  Issue 364

Lumbermens  since 1986

❘

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Sam x702

‘09 John Deere Firewood Processor - This is 650J XLT

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID

‘95 Bell Ultra T

a Chomper Model PDA Item ID: 16 14091

automatice firewood processor Contact: AUSTIN Email: Austin@lumbermensco.com with John Deere power unit with Phone: 888-401-6367 EXT 703 low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

13238. Chris x700 Item ID: 14070

1995 BarkoAUSTIN 775 B Feller Buncher Contact: -Email: PumpsAustin@lumbermensco.com recently redone. 400 hrs Phone: 888-401-6367 EXT 703 on injection pump. always started

good working order. 22in '13good.

Johnin Deere 548G III kohing head. works great.

Item ID:head 8789

Item ID 13185. Sam x702 One owner and comes with all 5600 Hours, 23.1 Tires.

1999 Barko 160D - new engine with manuals and receipts. Purchased Contact: SAM approximately 1500 hours. Hour new for $32,500. Item ID 13865.

Email: Sam@lumbermensco.com meter dont work. The last 2 owners Sam x702 Phone: 888-401-6367 EXT 702 have only used it to load trucks or LOGGING EQUIPMENT

BANDIT

1999 Bandit 1900 Tracked Disc

as aTimberjack backup as needed.

207Has a CTR

Chipper - Cat Under Carriage Out at 50% or better. 475 hp

delimber, has been rebuilt.

Itemgrapple ID: 14144 Boom cylinders minor frame rebuilt engine,have out of frameleaks. rebuilt

of transmission, rebuilt reverse box. Runs great, paper work Item ID 13694. Sam x702 Cumminsdocumenting all work done.

Diesel. 7500 Hours. One owner.

94 Barko 275 - Excellent value

Sam x702

CUMMINS continuous grapple.

Well maintained. Item ID

Contact: MARK Email: Mark@lumbermensco.com with low at hours at 3,500. 5.9 13294.

Phone: 888-401-6367 EXT 708 OR 702-875-2703

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

Runs Great!. Item ID 13740. Sam

‘02 Jackson Shavings Mill x702 Item ID: 13736 BELL

Contact:1990 AUSTIN Bell Super T - This Bell has good condition. Just finished 10 Email: Austin@lumbermensco.com a brand new Duetz engine. Lever Acre clearing job, ready to work!

Phone: 888-401-6367 EXT 703 control, 33” bar, pump and tranny Remote control. Big production

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

230D Timberjack Forwarder

Boonville, New York

Item ID: 3778 www.starwebhosting.net/woodsmen/

2010that Tigercat 724E Started Item ID: 14247

SOUTHWEST FOREST PRODUCTS EXPO 353 Detroit Engine, Unknown hours, Standard Trans, Husky Brute loader Fri, 25 August - Sat, 26 August works well but pins are loose, No major leaks, New Brakes and Drums, 2 Hot Springs, Arkansas Item ID: 14248 www.arkloggers.com extra tires at 50%

Contact: AUSTIN Email: Austin@lumbermensco.com Since 1986, Lumbermens has Phone: 888-401-6367 EXT 703 published a monthly circular

Contact: AUSTIN Contact: LIZ 72NDEmail: ANNUAL GREAT LAKES Austin@lumbermensco.com Email: Liz@lumbermensco.com LOGGING Phone: & HEAVY EQUIPMENT 888-401-6367 EXTEXPO 703 Phone: 888-401-6367 EXT 701

The Tree it All!

07’ Tigercat 620C

Thurs, 7 Sept - Sat, 9 Sept

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Woods Publishing

ADVERTISING SALES Morris Woods Komatsu Processor & Forwarder

MID-ATLANTIC

LOGGING & BIOMASS EXPO

(888) 401-6367 ext. 704 Item ID: 8298 morris@lumbermens.co

P.O. Box 1916 Columbia, TN 38402-1916 John Deere 437C (888) 401-6367

Item ID: 1020

AD SUBMISSIONS

2010 model with 8500be hours, comes with a bucksaw, May sent to­ has never had a delimber mounted on it and primarily morris@lumbermens.co been used around a sawmill.

Contact: POSTMASTER AUSTIN Email: Austin@lumbermensco.com Send address changes to: Phone: 888-401-6367 EXT 703 Lumberman's Exchange

931-797-8029 P.O. Box 1916 Columbia, TN 38402

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of Timberjack 380C content submitted by advertisers Item ID: 410 and writers, the Lumberman's Exchange, its principles 95’ long frame model with JD winch. and Skidder is in excellent condition. are not held liable for associates, errors or omissions. Reproduction, Contact: in whole orAUSTIN part, is prohibited with­ Email: Austin@lumbermensco.com out written consent.

Phone: 888-401-6367 EXT 703

931-797-8029 ©2017 Woods Publishing

Phone: 888-401-6367 EXT 703 OR 931-797-8029

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

& 4 in 1 bucket.

Selma, North Carolina www.midatlantic-logging-biomass­ Contact: AUSTIN Email: Austin@lumbermensco.com expo.com/

Cambridge, Ohio www.ohioforest.org

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

702-875-2703

bells and whistles, its a production that go up and down, with airbags,

Contact: AUSTIN THE PAUL BUNYAN SHOW Email: Austin@lumbermensco.com Phone: 888-401-6367 703 OR8931-797-8029 Fri, 6 OctEXT - Sun, Oct

EQUIPMENT REPS

Email: Mark@lumbermensco.com

with 44 inch wheels, and Phone: 888-401-6367 EXTall 708the

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7 Item ID: 7436 Bell's Machining .....................

27 Good rubber and less than 4000 hours, in excellent

Menominee Saw ..................... 29

Tigercat 604

condition!

Brute Force Mfg. ..................... 31 Contact: AUSTIN Email: Buck Austin@lumbermensco.com Equipment (AIM) ........ 36 Phone: 888-401-6367 EXT 703 Corley 931-797-8029 Mfg .............................. 32

‘93 Barko 180B

Metal Detector's Inc. .............. 30 Item ID: 14077 Midwest Sharpening.............. 26 Contact: AUSTIN Mor bark ..................................... 9 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Multitek ...................................

12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg . ....................

Hydro-Ax 611E Feller Buncher34

Smith Sawmill 4 Item...........................

ID: 6694

210D Knuckleboom Loader on Truck

it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate700J machine JOHN DEERE Item ID: 2212 in ve1y good condition, Cuts 130 ('08) (4.5K hrs) One owner only, bought brand

feet a minute also has new in '08, undercarriage 60%.CLT Has anpresses. issue with

one or two pins on the rail that needs fixing. $2.5-$4K, therefore the cheap price. All maintenance has Sbeen &W 125 Mill with done on Band time. Reason for selling is owner needs to lower his overall monthly payments.

Item x703 QuotesID we13876. receivedAustin range between

Caterpillar generator - Low hours

Contact: JOE on the mill, electronic computer Set Email: Joe@lumbermensco.com

works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 709

801-362-2170

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage

Hydro-Ax 470 Feller Buncher

drive, hyd pac for carriage, Item ID: 9252 sawyers computer controls, 2230 hourscab, two tires 80% two 60% solid machine

couple pins in head could be changed one

cabinet with leak electronic fortight minor hydraulic very littledrives leak really carriage knees, husk including Contact: MARK 48" bottom saw and 36" top saw Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

STACKING RAC Ponsse Ergo

Item ID: 7720

Item ID: 3207 Hahn Machinery ...................... 3

replaced motor last year, 12,817 frame......... hours, leak The Paul Bunyan Show 39 on

heat/air good, enclosed cab, 80% rubber front 45% back, Hurst5.9Boiler 14 Cummins dry uses ............................. no oil, new pump, tight machine have to jump the starter safety switch, 20" saw, teeth are good Bull new set................................... to go with it! Call for more pictures21 Iron

Thomas 10 good, clutchIndustrial is a little loose, IsControls plumbed for..... groundsaw, trailer frames great loader Union Grove Sawand &truck!

Knife.. 2, 37

12k frame hours, 2000 hours on new $30k Mercedes diesel engine, H73 head, head rotator just rebuilt, slewing system for crane rebuilt 2k hours ago, main pump resealed about 1k hours ago, comes with set of tracks!

Currently working, buying newer. Call for more Pictures

Contact: MARK Kilgore Saw ............................. 22 Email: Mark@lumbermensco.com Lignomat .................................

Phone: 888-401-6367 EXT 70824

702-875-2703

Contact:Refiner MARK ................... 23 Universal Email: Mark@lumbermensco.com WoodMizer ................................

Phone: 888-401-6367 EXT 708l

702-875-2703

Contact: MARK Email: Mark@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 708 800.S48.6914 702-875-2703 I S73.663.7711

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

valve bank o ring, everything works as should, needs AC recharge, slasher grind saw 60"circle saw, truck runs new blower, 4x6 square tubing secures loader to frame,

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 31

L O G G I N G

j@lumbermens.co

Contact: feed deck MARK 20 foot out feed deck

Item ID: 6056& BIOMASS MID-ATLANTIC LOGGING Fri, 15 Sept - Sat,comes 16 Sept 2007 model with 5400 hours, with log forks,

Lexington, Kentucky Item ID: 7060 http://www.kfia.org/ 2007 model with 5634 original hours comes with KentuckyWoodExpo.aspx two year old 16’ bucksaw.

Contact: MARK DESIGN DIRECTOR Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 Donna Heninger

702-875-2703

BANDMILLS & HEADSAWS

machine, with air strain conveyers

KENTUCKY WOOD EXPO Fri, 15PRENTICE Sept - Sat,2210 16 Sept

Komatsu XH931XC-2 harvester & XF855-2 forwarder.

Like new, approx. 750 hours onDIRECTOR harvester, approx. 500 MARKETING hours on forwarder both in like new condition, tracks included! Going John back to Williams cutter, skidder, loader setup Call for more pictures (888) 401-6367 ext. 701

Grapple Skidder Currently 6303 original hours!

Meter is working, comes with 28L tires at 85%(NOT TIRES IN PICS) 2 1/2 years ago the motor was overhauled by John Deere great winch, tight pins, dry Danckaert Band Resaw - Roughly machine no leaks, woods ready/working machine! maintenance done 250-300 hours paper work docu10 hours on this machine since it menting work from John Deere. Part time loggers selling only because recently got new equipment. has been rebuilt, it has a 24foot in

Escanaba, Michigan

CAT 928G

PUBLISHER

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and JohnofDeere 648D at Location Itemall ID:equipment 14255 www.LumberMB\ISmagazine.com

Phone 315.284.4126 Fax Item ID: JW-093430 315.849.2045 Website Contact: SAM www.empirehyd.com Email:Email Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 info@empirehyd.com

‘04 Fabtek 344B

“Precision Under Pressure”

'97 CAT 525 Original Cable Skidder

L O G G I N G

Item ID: 9901

One Of A Kind. Has Never Pulled A Log. Owned By An Electric Company. Deal!

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘05 CAT TK560 Item ID: 14004

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘16 Halverson H140 Skidsteer (DEMO)

TSK ItemD5H ID: 14077 Item ID: 7098 Contact: Austin Ph: (888) 401-6367 x703 Very LOW Hours, Excellent Condition,

Item ID: JW-909632 Hard To Find Dozer.

Contact: J Williams Ph: (888) 401-6367 x701 Contact: SAM

Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘95 John Deere C6 Tree Farmer Meadows #1 Complete ‘06 CAT 517 Sawmill 13428 Victory Ln. // PO Box 124

Item ID: 13869 Adams Center, NY 13606 Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Item ID: 14069

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘13 KMC 2500 Track Skidder Item ID: 14078 Danchaert Band Resaw Contact: Austin Item ID: 13876 Ph: (888) 401-6367 x703

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 off onto a conveyor. This is a very

well built processor. Item ID 13820.

‘06 Brewco B1600 Resaw Item ID: 13862

Contact: SAM ‘05 Gehl CTL 70 Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 Item ID: JW-986495

S A W M I L L

‘93 Barko 180B

‘83 John Deere 4850

Contact: J Williams Ph: (888) 401-6367 x701

Quality 4 Head Trim Saw

Item ID: 1559 chain conveyer, 8 way splitter, on Item ID: 14073 Ready to run, operates from either end, Va Area 20,000lb goose neck trailer. Item ID Contact: Austin Contact:13916.

LIZ Austin x703 Ph: (888) 401-6367 x703 Email: Liz@lumbermensco.com Phone: 888-401-6367 EXT 701 Best Value Portable Log Splitter

Sam x702

Firewood Processor - This is a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

'16Control LT40 panel Super low hours. includes Hydraulic tach, oil pressure, water temp and

Item ID: 9903 amp gauges. Cuts logs up to 16”.

Oneowner Owner!

136 hours, Tons One and comes with all of Extra Parts. Priced cheap! manuals and receipts. Purchased Contact: SAM Item ID 13865. new for $32,500.

Email: Sam@lumbermensco.com Sam x702 Phone: 888-401-6367 EXT 702

LOGGING EQUIPMENT BANDIT

with 1700 hours, in very good

- Small manufacturer in PA has

quality chips with patented ‘Cone’

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

condition. Easily produces high

drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in '02 excellent condition. Runs great.

WoodMizer LT-40 Item ID: 11345 Item ID 13644. Sam x702 Kubota Diesel engine.

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor Contact: AUSTIN -Email: It has aAustin@lumbermensco.com 353 Detroit diesel, 40 Phone: 888-401-6367 EXT30 703 inch insert tooth circle saw, foot 379  Issue 364

made the best valued log splitter.

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

'11-'12 Helle Sawmill

Value! PA.Item Item ID: ID 12062.

14119Sam x702 Firewood Processor - This is a 56” auto carriage hydraulic head control homemade with a 10’5 log cab, vertical 2processor saw edger log turner, log Hasdeck, a hydraulic grapple, stopdeck. and load 60’ long track. chain and kicker that all runs off Contact: MARK Email: Mark@lumbermensco.com of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 708 unit.

Has 702-875-2703 a 4’ chain saw that kicks

Lumbermens  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

Hurdle #2Model Sawmill 2004 Bandit Beast 4680 Item ID: 8720 3412 Caterpillar Diesel engine

2016 Complete sawmill package, includes precision chip

with 850vibrating HP. 5300 hrs. in Morgan pack, 80ft conveyer, HMCMill Debarker, Slab edger, 3 strand log deck, and more.

good condition. Just finished 10 Contact: AUSTIN Acre clearing job, ready to work!

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Remote control.

Big production

931-797-8029

 List  seLL  exchange  buy  save

Item ID: 13920 Scragg Precision Contact: Austin Item ID: 3607 Ph: (888) 401-6367 x703

Precision Scragg, excellent condition, 40 hp twin saw motor, 4,6,8,and 10 inches, can send video of it running, Va Area Item ID 13421. Sam x702 capacity!.

Contact: LIZBARKO Email: Liz@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 701 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone.

400 hrs BAKER BAND RESAW

C started on injection Model pump. always Item ID: 8189 good. in good working order. 22in

This is a BRAND NEW UNUSED multi-head band kohing head. works great. resaw. The projecthead that owner was going to work

on got cancelled and it was too late to return and original invoice can be provided upon requests. NEW 1999 Barko 160D new engine with CONDITIONS!

Item ID 13185.

Samreceipts x702 machine.

Paper work,

approximately 1500 hours. Hour Contact: JOE Email: Joe@lumbermensco.com

meter work. The Phone:dont 888-401-6367 EXT last 709 2 owners

801-362-2170

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

‘05 Woodmizer LT300 BELL

Item ID: 14031 1990 Bell Super T - This Bell has Contact: AUSTIN aEmail: brandAustin@lumbermensco.com new Duetz engine. Lever Phone: 888-401-6367 EXTtranny 703 control, 33” bar, pump and

931-797-8029 ❘

 LumbermensCO.com

** CALENDAR**

'02 Woodmizer LT-40 Super HD Item ID: 14118

Has the Kubota Diesel Motor!

NY STATE WOODSMEN'S FIELD DAYS Contact: AUSTIN Fri, 18 August - Sun, 20 August Email: Austin@lumbermensco.com New York Phone: Boonville, 888-401-6367 EXT 703 www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Complete Fri, 25Edmiston August - Sat, 26 August

Sawmill Hot Springs, Package Arkansas Item ID: 14084 www.arkloggers.com

The Tree Sanborn Scragg Mill that Started Item ID: 14050 it All!

Contact: AUSTIN Email: Austin@lumbermensco.com 72ND ANNUAL GREAT LAKES Phone: 888-401-6367 EXT 703 LOGGING & HEAVY EQUIPMENT EXPO

Contact: AUSTIN Email: Austin@lumbermensco.com Since 1986, Lumbermens has Phone: 888-401-6367 EXT 703 published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR

Contact: AUSTIN DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 703

EQUIPMENT REPS

‘06 Woodmizer LT70 Electric Item ID: 14076

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

Lexington, Kentucky http://www.kfia.org/ Wood-Mizer LT40 KentuckyWoodExpo.aspx Item ID: 13995

Contact: AUSTIN AUSTIN SHOW THE Contact: PAUL BUNYAN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Fri,Phone: 6 Oct888-401-6367 - Sun, 8 OctEXT 703 Phone: 888-401-6367 EXT 703

Cambridge, Ohio www.ohioforest.org

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Shrink Wrap ** INFO LINK** FireWOOD/WaSteWOOD

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Danckaert Band Resaw - Roughly

‘13hours Woodmizer 4000 Sawmill 10 on this machine since it Item ID: 14000 has been rebuilt, it has a 24foot in Contact: AUSTIN feed deck 20 foot out feed deck Email: Austin@lumbermensco.com with 44 inch wheels, and all the Phone: 888-401-6367 EXT 703 bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703

‘14 Hurdle 3-HD

S & W 125 Band Sawmill Mill with Block Item ID: 13997 Caterpillar generator - Low hours on the mill,AUSTIN electronic computer Set Contact: Email: Austin@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

Baker Sawmill & Edger

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab,maintanence computer controls, breather, regular brand new track/con-

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives forare predator engine baker setworks hydraulic setworks

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

Corley Mfg 32 Multitek Sell Your WOOD –.............................. $300/cord or ...................................

More! 12

Double or triple your profits by shrink wrapping wastewood - foreThe Lumberman's Exchange is CW Mill-ArmorHog .............. 17 Rotochopper............................ 40 woodmonthly withbyWOOD-PAKer! Attractive various size packages can be published Woods CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 Publishing, P.O. Box 1916, obtained with our high production, easily operated and affordable Columbia, TN 38402. All rights Dyna Products ........................ 35 Sawmill Exchange .................. 11 reserved.

All editorial/ advertorial machines.

Eight machines available. The ideal equipment for producsubmissions are used at the Empire Hydraulics ................... 8 Select Sawmill ......................... 19 ing square bundles-palletizable for ease in storage and transporting. discretion of the publisher and may be edited for purposes of clarity Great Lakes . ....................

34 Smithat Sawmill ...........................

Inquire for free details. Video andMfg Package samples nominal fee. 4 and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

BANDMILLS & HEADSAWS

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

B & B Manufacturing Hurst • 3007 West River Road • Olean, NYControls 14760 Boiler .............................

14 Thomas Industrial ..... 10

Toll Free 1-800-654-5320 Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

E-mail: bbmfg@verizon.net • Web: www.bbmfg.org Lignomat .................................

24 WoodMizer ................................ l

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard Itemlog ID:turners, 14226 carriage

drive, hyd pacand forEdger carriage, 2008 Baker sawmill less than 5600 hours

3665D 85 hp cummings engine has 2500 Hours, new

‘97 Timberjack carriage 360Cknees, husk including

duate produces 6-7k feet per day. Baker edger 28hp automatic has full owners manual

Contact: 48" bottom saw and 36" top saw Item ID:MARK 14044 Email: Mark@lumbermensco.com Contact: Sam Phone: 888-401-6367 EXT 708 Ph: (888) 702-875-2703 401-6367 x702

STACKING RAC

Morgan Band Resaw Item ID: 4849

John Deere 548D

with runaround system, 40 Hp saw motor with cab controls and panel, Lots of extra bands filing equipment. Running Item and ID: 14024 NOW. Setworks and in-feed and-out Contact: Sam feed decks NOT INCLUDED in this price... they will not be sold Hydralic power pack Ph: (888) 401-6367 x702 included with Morgan, Va area

Contact: Has a 2000LIZ hour warranty. It comes www.BakerProducts.net Email: Liz@lumbermensco.com 800.S48.6914 I S73.663.7711 Phone: 888-401-6367 mounted on 30.5 tires at EXT 95%.701

with401-MENS a 22” tower head. ❘ Comes  (888) NO.Item 33 L! 401-MENS ID 13864. Sam x702 2015 John Deere 748L - This is

S A W M I L L

John Williams Corley Complete Sawmill (888) 401-6367 ext. 701 Item ID: 14035 j@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

Woodmizer LT40 Sawmill

“Precision Under Pressure”

Phone 315.284.4126Item ID: 14227 Fax 2010 Woodmizer lt40 2250 hours 28 hp koeler v-twin gas 315.849.2045 engineWebsite extender arms simple setworks hydraulic deck all lever controlled low hours www.empirehyd.com Email Contact: MARK info@empirehyd.com

Item ID: 13956

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

S A W M I L L

Woodmizer Twin Blade Diesel Edger Item ID: 14191

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘93 Barko 180B

‘16 Halverson H140HudSonItem H360 ID: Portable 14077 Sawmill Item ID: 8841 Contact: Austin Skidsteer (DEMO)

2016, 1000 Hours, 35HP Motor, Hydraulic Log Dog, Ph: (888) 401-6367 x703 Item ID: JW-909632 Hydraulic Back Stop, ProCut Saw Blade 13FT 11in 7/8, TS 1 1/4 PV 121 Peavy Hook, KY area Contact: J Williams Ph: (888) 401-6367 x701Contact: LIZ

Email: Liz@lumbermensco.com Phone: 888-401-6367 EXT 701

03’ Woodmizer LT-300 Operation Item ID: 14171

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

'15 Blockbuster 18-20 Plus Firewood Processor Item ID: 14148

13428 Victory Ln. // PO Box 124 with 30ft conveyer! Only has about 150 hours. ExcelAdams Center, NY 13606 lent condition.

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703

'08 Dynamic Chipper Item ID: 14196

M I S C E L L A N E O U S

‘08 Timberking B20

2008 conehead dynamic chipper model 585 1762 hours great condition 500 hp john deere comes with $2k worth of new knives new drum with about 6o hours inch thick heavy duty skin

‘05 Gehl CTL 70

Contact: MARK Item ID: JW-986495 Email: Mark@lumbermensco.com Phone: 888-401-6367 708 or 702-875-2703 Contact: JEXT Williams

‘83 John Deere 4850

Ph: (888) 401-6367 x701

02’ Jackson Lumber Harvester Item ID: 1187

chain conveyer, 8 way splitter, on Item ID: 14073 30ft leg dust collector, two cilos, open top trailers, dust 20,000lb goose neck Item ID collector, blower unit, and Bagger.

One trailer. owner machine Contact: Austin 13916. Austin x703 Ph: (888) 401-6367 x703Contact: AUSTIN Model 30D10, entire operation includes knife grinder,

Email: Austin@lumbermensco.com Best Value Portable Log Splitter Phone: 888-401-6367 EXT 703 OR 931-797-8029

with 1700 hours, in very good

- Small manufacturer in PA has

quality chips with patented ‘Cone’

Handles logs up to 32”. Uses

condition. Easily produces high

drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

Precision Chipper in excellent condition.

Runs great.

Item ID: 4524 Item ID 13644. Sam x702 66 inch ReBuilt Precision Chipper FIREWOOD PROCESSORS good shape 2010 Shop Built Wood Processor LIZ -Contact: It has a 353 Detroit diesel, 40 Email: Liz@lumbermensco.com inch insert tooth circle saw, foot Phone: 888-401-6367 EXT30 701 379  Issue 364

made the best valued log splitter.

13HP Honda motor. Manual start but electronic option is available.

Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

KWID425 CAT Value! '93 PA. Item 12062.

Sam x702 Item ID:13342 Firewood Processor - This is a with ten processor speed 220 homemade withInframe a 10’ twenty four feet of frame belog deck. Has a hydraulic grapple, hind the cab chain and kicker that all runs off Contact: WALKER of a 4 cylinder Mercedes power Email: Walker@lumbermensco.com unit.

Has888-401-6367 a 4’ chain saw EXT that 707 kicks Phone:

Lumbermens  since 1986

❘

‘95 John Deere C6 Tree Farmer

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703Saw Cornell Double End Trim

‘13 KMC 2500 Track Skidder Item ID: 14078 Meadows #2 Deluxe Contact: Austin Item ID: 14250 Ph: (888) 401-6367 x703

Item ID: 6307

1995 model with automatic setworks, variable speed feed & hydraulic conveyer.

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: off onto a888-401-6367 conveyor. ThisEXT is a703 very

well built processor. Item ID 13820.

capacity!. Item ID 13421. Sam x702 Contact: AUSTIN BARKO Email: Austin@lumbermensco.com Phone: 888-401-6367 1994 Barko 160B - ElectricEXT 703

931-797-8029 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Frick #1 Jumbo Mill

grapple, 5,000 hours.

Item ID:original 200 (excellent ID Complete operationcondition.). that includes a Item meadows

Sam x702

Firewood Processor - This is

edger, HMC V206 Debarker, 48” Chipper, Chris x700other spare parts. blower,13238. live decks, and many

a Chomper Model 16 PDA

1995 Barko 775 B Feller Buncher automatice firewood processor Contact: AUSTIN

Email: Austin@lumbermensco.com - Pumps recently redone. 400 hrs with John Deere power unit with Phone: 888-401-6367 EXT 703 OR 931-797-8029

low hours. Control panel includes

on injection pump. always started

amp gauges. Cuts logs up to 16”.

kohing head. head works great.

tach, oil pressure, water temp and One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT Baker 2BANDIT Head Resaw

Item 6828 Disc 1999 Bandit 1900ID: Tracked

Chipper - Catruns Under Carriage With return, 1 inch bands, at runs good 50% or better. 475 hp Cummins Diesel.

7500LIZ Hours. One owner.

Contact: Email: Liz@lumbermensco.com Well maintained. Item ID 13294.

Phone: 888-401-6367 EXT 701 Sam x702 2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

good. in good working order. 22in Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

Woodmizer delimber, grapple has LT300 been rebuilt.

Item ID: 14278 Boom cylinders have minor leaks.

Call for info!

Item ID 13694. Sam x702 Contact: MARK 94 BarkoMark@lumbermensco.com 275 - Excellent value Email: Phone: 888-401-6367 EXT with low at hours at 3,500.

5.9708

702-875-2703 CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam

1996 Jackson Shavings Mill x702 Item ID: 1271

BELL

Model 30D6

good condition. Just finished 10

1990 Bell Super T - This Bell has

Contact: AUSTIN

Email: Austin@lumbermensco.com a brand new Duetz engine. Lever Acre clearing job, ready to work!

Phone: 888-401-6367 EXT 703 OR 931-797-8029

Remote control. Big production

 List  seLL  exchange  buy  save

control, 33” bar, pump and tranny ❘

 LumbermensCO.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

359 Peterbilt Truck Item ID: 7841

TheMiles.

Tree 1987 model with 600,000 Has 400 Cummins engine, air ride suspension, 40 rears, and all new drive that Started tires. Can be sold with or without a Pitts log trailer it All! Contact: AUSTIN Email: Austin@lumbermensco.com Since 1986, Lumbermens Phone: 888-401-6367 EXT has 703 published 931-797-8029 a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Kenworth Log Truck Item ID: 4849

SOUTHWEST FOREST PRODUCTS EXPO 1990 model with 300,000 original miles. Has 444Fri, Cum- 25 August - Sat, 26 August

Contact: AUSTIN AUSTIN 72ND Contact: ANNUAL GREAT LAKES Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXTEXPO 703 LOGGING & HEAVY EQUIPMENT

931-797-8029

931-797-8029

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

Mack Log Truck MID-ATLANTIC LOGGING & BIOMASS Item ID: 14087

Contact: AUSTIN Email: Austin@lumbermensco.com MID-ATLANTIC ADVERTISING SALES Phone: 888-401-6367 LOGGING & BIOMASS EXT EXPO 703 Woods Publishing

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

John Williams Item ID: 14188 (888) 401-6367 ext. 701 j@lumbermens.co Contact: AUSTIN

DESIGN DIRECTOR Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Fri, 15 Sept - Sat, 16 Sept

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

MARKETING DIRECTOR '99 Peterbilt Road Tractor

Donna Heninger

HotSun Springs, Arkansas 4 Bolster Log Trailer www.arkloggers.com Item ID: 8256

mins engine, 15 speed transmission, 46 rears. Recently had new head, pistons, rings, and New steer tires installed. Can be sold with or without a Pitts log trailer.

new conditions. Rear brakes are almost ready to be re10 hours on this machine since it placed. Good trailer, work-ready!

has been rebuilt, it has a 24foot in Contact: JOE feed deck 20 foot out feed deck Email: Joe@lumbermensco.com Phone: 888-401-6367 709 with 44 inch wheels, andEXT all the

801-362-2170 bells and whistles, its a production machine, with air strain conveyers

that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine

S & W 125 Band Mill with

AUSTIN SHOW THE Contact: PAUL BUNYAN Email: Austin@lumbermensco.com Fri, 6 Oct - Sun, 8 Oct

Cambridge, Ohio www.ohioforest.org

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

POSTMASTER

It has all new wiring, LED lights, air pin lock, turn table Danckaert Resaw - Roughly super tight withBand a 25' long bed. Those 4 bunks are in

http://www.kfia.org/ 3406 Cat engine and 4424 total KentuckyWoodExpo.aspx machine hours.

Item ID: 14112 Lexington, Kentucky

BELL’S FIREWOOD PROCESSORS ** INFO4000 LINK** SERIES

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Item ID: 8062 BANDMILLS & HEADSAWS

in ve1y good condition, Cuts 130

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

• 66 HP CAT Diesel MAILING ADDRESS Engine P.O. Box Saw 1916 • 44” Circular TN 38402-1916 •Columbia, 20” Diameter (888) 401-6367 Capacity • Single Joystick AD SUBMISSIONS Control May be sent to­ •morris@lumbermens.co 30 Ton Splitter Cylinder

25' LOG PUP 4 BUNKS TRAILER

'91 Fuel Harvester KENTUCKY WOOD EXPO Grinder Fri, 15 SeptTub - Sat, 16 Sept

Phone: 888-401-6367 EXT 703

EQUIPMENT REPS

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

feet a minute also has CLT presses.

Item ID 13876. Austin x703

Kenworth Road Tractor Truck

Caterpillar generator - Low hours Item ID: 14092 on the mill,AUSTIN electronic computer Set Contact:

Email: Austin@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

Item ID: 14228 sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

Miner 3 blade edger with brand new 3 phasefor motor cabinet with electronic drives

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Many Models & Options to Choose From!

Corley Mfg .............................. 32 Multitek ................................... 12

CRD Metalworks ....................

FIREWOOD TUMBLER 25 Piper's Saw Shop.................... 13 • Sturdy HSS Steel Welded CW Mill-ArmorHog .............. 17 Rotochopper............................ 40 • 4’ Diameter Barrel • Clean Out Chute 15 Row Electric ............................ 20 CW Mill-Hogzilla ...................

• Removes Debris & Bark as large as 2 ¼” Dyna Products 35Double Sawmill Exchange .................. 11 • Works........................ with all of our chain Hydraulic Lift conveyors Empire Hydraulics ...................

8 Select Sawmill ......................... 19 • Optional Honda Power Pack Available Great Lakes Mfg. .................... 34 Smith Sawmill ........................... 4

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have Hahn Machinery ......................

3 been made to ensure accuracy of Made In Canada content submitted by advertisers Hurst Boiler ............................. 14 and writers, the Lumberman's Exchange, its principles and Iron Bull ................................... 21 associates, are not held for liableDetails for Please Call errors or omissions. Reproduction, Kilgore Saw ............................. 22 or visit online with­ www.bellsmachining.com in whole or part,us is prohibited Lignomat ................................. 24 out written consent.

Financing Available ©2017 Woods Publishing

1-888-995-1965

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

The Paul Bunyan Show ......... 39 Thomas Industrial Controls..... 10 Union Grove Saw & Knife.. 2, 37 Universal Refiner ................... 23 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hydMiner pac for carriage, Edger

brand new mandrel and Cummins 4B39 generator

carriage knees, husk including Contact: MARK 48" bottom saw and 36" top saw Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

STACKING RAC

Desjardin Shingle Machine Item ID: 1970

PTO driven, Blade 37 1/2, runs great Massachusetts Area Contact: LIZ www.BakerProducts.net Email: Liz@lumbermensco.com 800.S48.6914 I S73.663.7711 Phone: 888-401-6367 EXT 701 ❘ L!  (888) 401-MENS 401-MENS

NO. 35

M I S C E L L A N E O U S

ve

** CALENDAR**

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

1990 Freightliner Item ID: 7422

'10 Woodsman 440 Whole Tree Chipper Item ID: 14105

3,000 original hours.

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘16 Halverson H140 Skidsteer (DEMO)

Cummins motor w/Jake Brake, 9 speed Eaton Fuller, Air Ride over spring suspension, 11.22.5 fair tires, 15'10" of frame from cab back, has A/C but not Item ID: JW-909632 working, 322,470 miles

Western Star Heavy Haul Item ID: 14093

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Contact: J Williams Ph: (888)LIZ 401-6367 x701 Contact:

Email: Liz@lumbermensco.com Phone: 888-401-6367 EXT 701

‘93 Barko 180B

Item ID: 14077 Contact: Austin AM General M818 Army Truck Ph: (888) 401-6367 x703 Item ID: 14576

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

‘04 Takeuchi TLN140

M I S C E L L A N E O U S

Item ID: JW-880805

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘13 KMC 2500 Track Skidder

Shop Built Firewood Processor 13428 Victory Ln. // PO Box 124

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

Item ID: 13994NY 13606 Adams Center,

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

off onto a conveyor. This is a very

Kenworth T800 Log Truck & Loader

well built processor. Item ID 13820.

‘06 Cord King Model 60

Sam x702 Item ID: 6006 Firewood Processor - This 1994 model with 1998 Grizzly 215c loader.is15000 Miles

‘05 Gehl CTL 70 Contact: AUSTIN

automatice firewood processor Contact: AUSTIN

Item ID: 14068

‘83 John Deere Shop Built Wood 4850 Processor

Item ID: 14073 Item ID: 14038 Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 with 1700 hours, in very good condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item"Like ID 13644.

Sam x702 New" Tajfun

Firewood Processor FIREWOOD PROCESSORS

Item ID: 14249 2010 Shop Built Wood Processor AUSTIN -Contact: It has a 353 Detroit diesel, 40 Email: Austin@lumbermensco.com inch insert tooth circle saw, 30 foot Phone: 888-401-6367 EXT 703 379  Issue 364

Email: ID: Austin@lumbermensco.com Item JW-986495 Phone: 888-401-6367 Contact: J Williams EXT 703 Ph: (888) 401-6367 x701

on fresh engine overhaul. 600,000 frame miles. Work

aready Chomper Model 16 PDA setup!

Email: Austin@lumbermensco.com

with John Deere power unit with Phone: 888-401-6367 EXT 703

931-797-8029

low hours. Control panel includes

tach, oil pressure, water temp and '98 International Chipper Truck

ID:Cuts 14140 amp Item gauges. logs up to 16”.

164k miles can haul 15 cubic yards, chain conveyer, 8 way splitter, on One owner and comes with all 12' long, small stash compartment, very well 20,000lb goose neck trailer. Item ID truck manuals and receipts. Purchased kept 13916. Austin x703

Contact: new MARKfor $32,500. Item ID 13865.

Email: Mark@lumbermensco.com Best Value Portable Log Splitter Sam x702 Phone: 888-401-6367 EXT 708 OR 702-875-2703

- Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

LOGGING EQUIPMENT BANDIT 1999 Bandit 1900 Disc ‘83 InternationalTracked S-Series

Item ID: Under 14080Carriage at 13HP Honda motor. Manual start Chipper - Cat Contact:50% AUSTIN but electronic option is available. or better. 475 hp Cummins Email: Austin@lumbermensco.com Diesel.

7500 Hours.

One owner.

Has Log Lift. Uses 4-way wedge Phone: 888-401-6367 EXT 703 adjustable to single two way. Great Well maintained. Item ID 13294.

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Sam x702

2004 Bandit Beast Model 4680 -

3412 Caterpillar Diesel engine homemade processor with a 10’‘06 Western Star Michigan Special ID:5300 14011 with Item 850 HP. hrs. Mill in log deck. Has a hydraulic grapple, chain and kicker that all runs off condition. Just finished 10 Contact:good AUSTIN Email: Austin@lumbermensco.com Acre clearing job, ready to work! of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 Remote control. Big production unit. Has a 4’ chain saw that kicks

Lumbermens  since 1986

❘

 List  seLL  exchange  buy  save

‘95 John Deere C6 Tree Farmer Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

‘15 Cord King M44

ID:13421.

13961Sam x702 capacity!.Item Item ID

BARKO Contact: AUSTIN Email: Austin@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 703 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

Offworking Trimorder.

Saw22in good.Cut in good Item ID: 5461 kohing head. head works great.

10 HP cut x702 off blade, 5 HP Item IDmotor 13185.on Sam motor on feed chain, Good Condition.

1999 Barko 160D - new engine with Contact: LIZ 1500 hours. Hour approximately Email: Liz@lumbermensco.com meter dont work. The last 2 owners Phone: 888-401-6367 EXT 701 have only used it to load trucks or as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL 3 Strand Log Deck

Item ID: 14095 1990 Bell Super T - This Bell has

AUSTIN aContact: brand new Duetz engine. Lever Email: Austin@lumbermensco.com control, 33” bar, pump and tranny Phone: 888-401-6367 EXT 703 ❘

 LumbermensCO.com

** CALENDAR** GMC LOG TRUCK Item ID: 5037

1995 model with new 6 liter engine with 60000 miles on it, good tires, has split 5 gear transmission.

NY STATE WOODSMEN'S FIELD DAYS Contact: Fri, 18AUSTIN August - Sun, 20 August Email: Austin@lumbermensco.com Boonville, New York Phone: 888-401-6367 EXT 703 OR 931-797-8029

www.starwebhosting.net/woodsmen/

'99 International 4700 Chip Truck

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat,Stacker 26 August 1995 Pendu

Item ID:Tree 14116 The

Item ID:Arkansas 1267 Hot Springs, www.arkloggers.com Contact: LIZ

that Started Only 71,697 Miles. it All!

Email: Liz@lumbermensco.com 72ND888-401-6367 ANNUAL GREAT LAKES Phone: EXT 701

Contact: AUSTIN Email: Austin@lumbermensco.com Since 1986, Lumbermens has Phone: 888-401-6367 EXT 703 published a monthly circular

LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

Item ID: 4268& BIOMASS MID-ATLANTIC LOGGING Fri, 15 Sept - Sat,in16good Sept Log trailer with 4 bolsters conditions.

Woods Publishing Morris Woods

MID-ATLANTIC

LOGGING & BIOMASS EXPO

2011 Dynamic (888) 401-6367 ext. 704 Horizontal Grinder morris@lumbermens.co

Ready toSelma, GO! North Carolina Contact: JOE www.midatlantic-logging-biomass­ Email: Joe@lumbermensco.com expo.com/ Phone: 888-401-6367 EXT 709 OR 801-362-2170

Item ID: 761 Lexington, Kentucky

1000 MARKETING hrs, 425 hp DIRECTOR Volvo Engine, Transfuild John Clutch,Williams Remote Control, Rev Fan, 25ft Stacking ext. conveyor, (888) 401-6367 701 Fix hammer Va. area

2006 modelhttp://www.kfia.org/ with Mack 410Hp engine, Eaton fuller 10 speed transmission, 44k reads on camelback suspension, KentuckyWoodExpo.aspx 744,000 frame Miles. Brand new tires! Road ready!

Contact: LIZ DIRECTOR DESIGN Email: Liz@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 701

Contact: AUSTIN THE PAUL BUNYAN SHOW Email: Austin@lumbermensco.com Phone: 888-401-6367 703 OR8931-797-8029 Fri, 6 OctEXT - Sun, Oct

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

** INFO LINK**

10 hours on this machine since it Precision lower pipe has been rebuilt, it has a 24foot in Brand new

feed deck 20 foot out feed deck Contact: LIZ with 44 inch wheels, and all the Email: Liz@lumbermensco.com Phone: 888-401-6367 EXT 701 bells and whistles, its a production that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130

KENTUCKY WOOD EXPO Fri, 15MACK Sept -CHN613 Sat, 16 Sept

j@lumbermens.co

Danckaert Band Resaw - Roughly Precision Lower Pipe

feetAspen a minuteBrush also hasChipper CLT presses.

Item ID: 14270 Item ID 13876. Austin x703

inline 6 cylinder ford engine, 3165 hours, runs good,

to work, and wheels new, handles up to Sready &W 125tires Band Milllike with 4" diameter brush, automatic feed

Caterpillar generator - Low hours Contact: MARK on the mill, electronic computer Set Email: Mark@lumbermensco.com Phone:1/2" 888-401-6367 works,1 or 2" band,EXT 22ft.708 track

702-875-2703 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

94’ Mack with Prentice 120 Sam x702 Item ID: 14215

CARRIAGES & DRIVES

B. H. Payne .............................. 16

Contact:2010 AUSTIN Cardinal HD Carriage Email: Austin@lumbermensco.com (Sawmill) - Cardinal Phone: Carriages 888-401-6367 EXT 703 Carriage line it includes carriage M&F Gauge ............................. 28 with onboard log turners, carriage Meadows Mill, Inc. ................ 33 610 drive, BOBCAT hyd pac for carriage,

Baker ...................................... 5, 7

Menominee Saw ..................... 29

Bell's Machining ..................... 27

cabinet electronic drives for4 of Metal Detector's Inc. ..............to30be replaced has partswith work needs to be done there are them, aux lines, 5' bucket, quick attach, hand and foot controls, carriage knees, husk 2667 including cab, late 70's early 80's machine Midwest Sharpening..............screened 26

B & B Mfg. ............................... 18

Brute Force Mfg. ..................... 31

Item ID: 14271 sawyers cab, computer controls,

30 hp air cooled 4 cylinder wisconsin engine clutch bands need

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

48" bottom saw and 36" top saw Contact: MARK Morbark .....................................

9 Mark@lumbermensco.com Email:

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................1978 20 Windzer Forklift needs fuel pump call for more info

Dyna Products ........................ 35 Great Lakes Mfg. .................... 34

Sawmill Exchange ..................Contact: 11 MARK Email: Mark@lumbermensco.com Select Sawmill ......................... Phone: 19 888-401-6367 EXT 708 or 702-875-2703 Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39Chomper

Empire Hydraulics ................... 8

Please see us at

Phone: 888-401-6367 EXT 708 OR 702-875-2703

STACKING RAC

‘78 Windzer Forklift Item ID: 14235

Firewood Processor

Item ID: 14139

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

300 hrs 65 hp John Deere diesel engine Union Grove Saw & Knife.. 2, Under 37 sheers the log no sawdust

Booth #421

Kilgore Saw ............................. 22

Universal Refiner ................... Contact: 23 MARK

Lignomat ................................. 24

www.BakerProducts.net WoodMizer ................................ l Phone: 888-401-6367 EXT 708 800.S48.6914 I S73.663.7711

702-875-2703

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

Email: Mark@lumbermensco.com

❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 37

M I S C E L L A N E O U S

ADVERTISING SALES

BANDMILLS & HEADSAWS

machine, with air strain conveyers

4 BUNK TRAILER

PUBLISHER

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot 379  Issue 364

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 39