Lumbermens June 2019

F R E E

E Q U I P M E N T

L I S T I N G S

TM

REPUTATION IS IMPORTANT DON’T MAKE A MISTAKE, CHOOSE

PAQ I

RESAW

PAQ II

OPTIONS AVAILABLE: Electronic Setworks | Digital Readout Hydraulic Powered Hold Down

RESAW

DON’T BE FOOLED BY A LOOK-A-LIKE FACTS: THE FIRST-ORIGINAL DESIGN TIME PROVEN: 1999 to present PROUDLY MADE IN THE USA # 1 RESAW MANUFACTURER THOUSANDS OF SATISFIED CUSTOMERS

Y E A R S

TIME PROVEN

BakerProducts.net 573.663.7711 800.548.6914

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 385

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 3

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 385

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

PleAse PrINt

blades and 1 spare 36" blade),

❑ Please Remove

** CALENDAR**

where to order included. Item ID 12846. Sam x702

Zip

cuts from sawline, log stop and

loader to drop logs onto carriage,

Precision 58 Chip Pac - Single chute

stop and loader to deal with big

Sam x702

heavy duty log turner under log

loading system,. Item ID 12764.

State

logs onto carriage and track and

frame. Significant new spare parts

Email

to be negotiated separately. Item ID 13198. Sam x702

Manual Four Head Block - Manual www.starwebhosting.net/woodsmen/

From TA ApriL BLE

DEPARTMENTS The Tree that Started it All!

all steel carriage. Husk. Manual

Phone

Address

Individual Name

Company Name*

❑ Please add

*Company name and address required to process your change.

If you need to Change your Address or Add Your Name to our mailing list, then please complete this form and mail to:

LIST

SELL

EXCHANGE

✁

BUY

SAVE

Morris Woods AD Sales

2012 JoHn deere 548G3

(888) 401-6367

morris@lumbermensco.com

MID-ATLANTIC

LOGGING & BIOMASS EXPO

chris Woods Phone: (888) 401-6367 ext. 700 chris@lumbermens.co

Mark Laxton Lexington, Kentucky http://www.kfia.org/ (888) 401-6367 KentuckyWoodExpo.aspx Ext. 708

FAbTeK 344b

THE PAULmark@lumbermensco.com BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

(888) 401-6367 REPRODUCTION AND RESPONSIBILITY: Advertisers are responsible for the contents and claims of their advertising.

Austin Woods Lumbermens™ accepts no responsibility for their claims. No  Issue lumbermenS  Since 1986 in ❘ any form  liSt  Sell part of this364 publication may be 703 reproduced or transmitted or by any means,  (888) 401-6367 ext. electronic or mechanical, including photocopying, recording or any information storage austin@lumbermens.co retrieval system, without permission of Lumbermens™. Negatives, artwork, and other items submitted for publication in Lumbermens™ are the property of advertiserQs. Lumbermens ™ MAILING ADDRESS owns material typeset and/or designed by Lumbermens ™ and reserves the right to its use B & B Mfg. ............................... 18 P.O. Box 1916 outside of Lumbermens™.

Lumbermens™ will exercise every precaution in writing, designing, Columbia, TN 38402-1916 and printing material contained within. We shall not be liable for omissions or typographical B. H. Payne .............................. 16 errors.

(888) 401-6367

Cambridge, Ohio www.ohioforest.org

Austin Woods Phone: (888) 401-6367 ext. 703 austin@lumbermens.co

Walker Woods

** INFO LINK**

(888) 401-6367

exchange  buY  Save

❘

Ext. 707

walker@lumbermensco.com

M&F Gauge ............................. 28 Meadows Mill, Inc. ................ 33

Chris Woods

that go up and down, with airbags, it(888) includes401-6367 two sets of Mcdonough

pressure guides. Top Casting wheel Ext. 700 ischris@lumbermensco.com supported on both sides. This

is an extremely accurate machine Morris Woods, Ad Sales morris@lumbermens.co feet a minute also has CLT presses.

Austin Woods Item ID 13876.

Austin x703 S (888) & W 125401-6367 Band Mill with

Caterpillar generator - Low hours Ext. 703

on the mill, electronic computer Set austin@lumbermensco.com

works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam Wall

Phone: (888) 401-6367 Sam Joex702 Ferrazzano ext.

702

CARRIAGES & DRIVES (888) 401-6367

sam@lumbermens.co

2010 Cardinal HD Carriage

 lumbermenSmagazine.com

Ext. 709

Carriages (Sawmill) - Cardinal joe@lumbermensco.com

Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage,

Baker ...................................... 5, 7

Menominee Saw ..................... 29

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

PUBLISHER Woods Publishing

Ted Schultz

(888) 401-6367 Ext. 701

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25 Ted Monnin

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and Since 1986, associates, areLumbermens™ not held liable for has published a monthly circular errors or omissions.

Reproduction, reaching sawmills, loggers, with­ pallet in whole or part, is prohibited makers, recyclers out written consent. and industrial woodworking plants worldwide. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17 MAILING ADDRESS

Rotochopper............................ 40

The Tree that Started it All!

machine, with air strain conveyers

Phone: (888) 401-6367 in ve1y good condition, Cuts 130 ext. 704

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

Reduced PRice item id: 14021 contact: Sam x702

Sam Wall For classifieds CHANGE OF ADDRESS: Send address changes to Lumbermens™ Magazine, P.O. Box 1916, (888) 401-6367 ext. 702 Columbia, TN 38402. When possible, please include an old address label.

Call toDay sam@lumbermens.co

POSTMASTER

custom chute. 23” in opening and

EquipmEnt REpREsEntativEs

item id: 14061 contact: Austin x703

DESIGN DIRECTOR

May be sent to­ morris@lumbermens.co

clutches, disc, bearing, liners and

EST on this 1986 10 hours machine since it Hot Springs, Arkansas cAll uS todAy foR All youR uSed www.arkloggers.com equiPMent hasneedS! been rebuilt, it has a 24foot in

SUBSCRIPTION: Lumbermens™, a trade newspaper for the logging, sawmilling, pallet Donna Heninger manufacturing, and secondary wood manufacturing industry, is free within the United States item id: 14061 to qualifying manufacturers and industry suppliers.

Please limit your subscription tox701 one free contact: J Williams EQUIPMENT REPS copy per company or mill location.

AD SUBMISSIONS

V-12 Caterpillar power unit. New

feed deck 20 foot out feed deck 72ND ANNUAL GREAT LAKES fREE EquipmEnt listings!

Call –E L I S T with S E L44 L inch E X C Hwheels, ANGE B and UY S A Vthe all LOGGING & HEAVY EQUIPMENT EXPO 401-6367 (888) Thurs, 7 Sept - Sat, 9 Sept bells and whistles, its a production

P.O. Box 1916 Columbia, TN 38402

Lumbermens Magazine

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

with about 840 hours except for the

Danckaert Band Resaw - Roughly

Fri, 25 August - Sat, 26 August

Woods Publishing

MARKETING DIRECTOR

chipper that has been totally rebuilt

V-12 Cat with 750-800 hp rating.

Free Equipment Listings...........6 Select Sawmill Editorial...........14 Escanaba, Michigan EST 1986 MID-ATLANTIC LOGGING & BIOMASS Deals of the Month..................16 Fri, 15 Sept - Sat, 16 Sept PUBLISHER Selma, North CarolinaExt. 704 www.midatlantic-logging-biomass­ AdADVERTISING Directory. . ............................38 SALES expo.com/ Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Trelan Chipper - This is a remote

OF C O N T E NBANDMILLS T S & HEADSAWS FOREST PRODUCTS EXPO Four Head Block Mounted on

'12 WoodmIzer LT 40 SOUTHWEST

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

TM

FOR CLASSIFIEDS CHIPPERS Call 888.401.MENS LIST SELL EXCHANGE BUY SAVE EST 1986 See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at of Boonville, New York www.LumberMB\ISmagazine.com DealS the Month belted rollcase to clear slabs and

City

❑ Please Change

Pulleys on Bearing . Parts Book and

short pop-up transfer to edger,

DESIGN DIRECTOR

P.O. Box 1916 CW Mill-Hogzilla ................... 15 Columbia, TN 38402-1916 (888) 401-6367 Dyna Products ........................ 35

teds@lumbermensco.com

Demi

Row Electric ............................ 20

Laxton

Sawmill Exchange .................. 11

(385) 335-4225

Empire ................... 8 ADHydraulics SUBMISSIONS

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

May be sent to— morris@lumbermensco.com

POSTMASTER Hurst .............................

SendBoiler address changes to: 14 Lumbermens™ Magazine Iron BullP.O. ...................................

21 Box 1916 Columbia, TN 38402 Kilgore Saw .............................

22

Lignomat ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Demi@lumbermensco.com

Thomas Industrial Controls..... 10

Will

Union Grove Saw & Knife.. 2, 37

Keene

Universal Refiner ................... 23

(661) 900-7726

WoodMizer ................................ l

Will@lumbermensco.com

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

sawyers cab, computer controls, Sam Wall

(888) 401-6367 Ext. 702

48" bottom saw and 36" top saw sam@lumbermensco.com

STACKING RAC

Fernanda

McDermott

(801) 699-8784

fery@lumbermensco.com

Wes Graber (888) 401-6367 Ext. 710

www.BakerProducts.net

Wes@lumbermensco.com 800.S48.6914 I S73.663.7711

❘ L!  (888) 401-MENS 401-MENS

NO. 5

“Precision Under Pressure”

TM

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO)

‘93 Barko 180B Item ID: 14077

FREE EQUIPMENT LISTINGS, CALL (888) Contact: 401-MENS Austin BANDMILLS & HEADSAWS

CARRIAGES & DRIVES

DANCKAERT BAND RESAW 2010 CARDINAL HD Roughly 10 hours on this CARRIAGE CARRIAGES machine since it has been Cardinal Carriage line it includes rebuilt, it has a 24 foot in feed carriage with onboard log turners, deck 20 foot out feed deck with carriage drive, hyd pac for 44 inch wheels, and all the bells carriage, sawyers cab, computer and whistles, its a production controls, cabinet with electronic machine, with air strain drives for carriage knees, husk conveyers that go up and down, including 48” bottom saw and 36” with airbags, it includes two top saw, short pop-up transfer sets of Mcdonough pressure to edger, belted rollcase to clear guides. Top Casting wheel is slabs and cuts from sawline, log supported on both sides. This is stop and loader to drop logs onto an extremely accurate machine carriage, heavy duty log turner in very good condition, Cuts under log stop and loader to deal Victory Ln. POCLT Box 124 130 13428 feet a minute also//has with big logs onto carriage and Adams Center, NY 13606 presses. track and frame.

Item ID 13876. Austin x703 Item ID 13198. Sam x702

Item ID: JW-909632 CHIPPERS Contact: J Williams PRECISION 58 CHIP PAC Ph: (888) 401-6367 x701 Single chute loading system.

Item ID 12764. Sam x702 COMPLETE SAWMILLS

2006 WOODMIZER LT300 This mill is currently running, and includes the sawmill, and cab. An incline conveyers, a transfer table and two sets of roller tables.

This mill saws a million board feet more2500 of walnut every ‘13 or KMC Track year. Max log diameter 36in, Skidder Max Width of cut 25in, The Item ID: width of 14078 the band is 1 1/2 Contact: Austin Inches.

Video of it operating (888) 401-6367 x703 isPh: available, and can be sent upon request.

Item ID 13892. Austin x703

Pay Back Firewood Processor - This is

(excellent condition.). Item ID

$1,000,000

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

‘83 John Deere would like to welcome 4850 the newest member to our team!

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

chain conveyer, 8 way splitter, on

condition. Easily produces high

Wes Graber 13916. Austin x703 Best Value Portable Log Splitter 888-401-MENS - Small manufacturer in PA has Ext.710 made the best valued log splitter.

drum design. Can easily load 42’

13HP Honda motor. Manual start

with 1700 hours, in very good

20,000lb goose neck trailer. Item ID

a Chomper 16 PDA inModel as little as

automatice 4 firewood processor months

with John Deere power unit with with

lowSAWCONTROL.com hours. Control panel includes tach, oil pressure, water temp and amp gauges.

CutsExpo logs up to 16”.

SFP One owner Atlanta and comes with all

manuals and receipts. Purchased

Booth 1723 new for $32,500. Item ID 13865.

Sam x702

for details

EDGERS & GANGS

adjustable to single two way. Great

inMennonite excellent condition.

Runs great. church.

Item ID 13644. Sam x702

Firewood Processor - This is a

homemade processor with a 10’

I live in northern Indiana withlog mydeck. wifeHas and children on a FIREWOOD PROCESSORS a hydraulic grapple, small but growing homestead.

2010 Shop Built Wood Processor

chain and kicker that all runs off

- It haslove a 353of Detroit 40 and integrity of a 4 cylinder Mercedes power in The God, diesel, honesty are values we teach

inch tooth circle saw, 30 the foot values unit.I Has a 4’to chain that kicks ourinsert home, and they are bring the saw workplace.  Issue 364 385

Lumbermens™  since 1986

❘

2010 SHOP BUILTHour approximately 1500 hours.

PROCESSOR meterWOOD dont work.

The last 2 owners

94 Barko 275 - Excellent value

50% or better. 475 hp Cummins

Brewco Saws and - Two IBrewco Saws Value!

Item ID 12062. AmishSam x702 My wife are members of aPA. conservative

FIREWOOD 1999 Barko 160DPROCESSORS - new engine with

Diesel. 7500 Hours. One owner.

vans and produce 6 - 8 loads per

but electronic option is available.

2008 DYNAMIC 585 CHIPPER This is a 2008 dynamic cone 13238.

Chris x700 head chipper with 1700 hours, 1995 Barko 775 Bcondition.

Feller Buncher in very good Easily highredone. quality -produces Pumps recently 400 chips hrs with patented ‘Cone’ drum on injection pump. always started design. Can easily load 42’ good. in good working order. 22in vans and produce 6 - 8 loads kohing head. head works great. per day.

Item ID ID 13185.

Sam Austin x702 x703 Item 13882.

Chipper - Cat Under Carriage at

1999 Bandit 1900 Tracked Disc

My name is Wes Graber. I have worked with excavating, Has Log Lift. Uses 4-way wedge logging, and trucking equipment for the last 15+ years.

grapple, 5,000 original hours.

It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot as a backup as needed. Has a CTR chain conveyer, 8 way splitter, on delimber, has been rebuilt.

20,000lb grapple goose neck trailer.

Itemcylinders ID 13916.

Austin Boom have minorx703 leaks.

LOGGING EQUIPMENT BANDIT

quality chips with patented ‘Cone’Wes@Lumbermensco.com Handles logs up to 32”. Uses

day. Item ID 13882. Austin x703

MEC 12 X 38 TRIPLE PASS DRUM DRYER Comes with trunnions, drum drive, fan and cyclone.

Item ID 13925. Austin x703

well built processor. Item ID 13820.

Sam x702 TM

DRY KILNS

MEC 12 X 42 TRIPLE PASS DRUM DRYER ‘95 John Deere C6 12 x 42 Mec triple pass TreeDryer, Farmer Drum comes with trunnions.

Item ID: 13920 Item ID 13924.

Contact: AustinAustin x703 CHIPPERS Ph: DYNAMIC (888) 401-6367 x703 2004 JCB 441 WHEEL LOADER 3,509 hours on13421. this Sam machine, capacity!. Item ID x702 everything works as it should. I BARKO have many videos available of it 1994 Barko 160B - Electric running, and can be sent upon knuckleboom, 30' boom, 75hp request.

ItemRotobec ID 13888.

Austin x703 motor, continuous

off onto a conveyor. This is a very

WE AT

Ph: (888) 401-6367 x703

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

good condition. Just finished 10

Acre clearing job, ready to work!

Remote control. Big production

 List  seLL  exchange  buy  save

have only used it to load trucks or

Item ID 13694. Sam x702

FIREWOOD PROCESSOR This is a homemade processor with low at hours at 3,500. 5.9 with a 10’ log deck. Has a CUMMINS grapple.and hydraulic continuous grapple, chain kickerGreat!. that Item all runs off of Runs ID 13740.

Sama 4 cylinder Mercedes power unit. x702 Has a 4’ chainBELL saw that kicks off onto a conveyor. This is a very 1990 Bell Super T - This Bell has well built processor. a brand Duetz engine.

Lever Itemnew ID 13820.

Sam x702 control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 7

40

used

or a

02

00

t

02

r

y

wer

w

ill

FIREWOOD PROCESSOR Phone good condition. Just finished 10 This is a Chomper Model 16 PDA Acre clearing job, ready to work!

315.284.4126 automatice firewood processor FaxRemote control. Big production 315.849.2045 with John Deere power unitWebsite capacity! www.empirehyd.com with low hours. Control panel Item ID 13421. Sam x702 Email BARKO includes oil pressure, “Precisiontach, Under Pressure” info@empirehyd.com water temp and amp gauges.

1994 BARKO 160B Cuts logs up to 16”. One owner Electric knuckleboom, 30’ and comes with all manuals and boom, 75hp motor, Rotobec receipts. Purchased new for continuous grapple, 5,000 origi$32,500. nal hours. (excellent condition).

Item ID 13865. Sam x702 Item ID 13238. Chris x700 LOGGING EQUIPMENT BANDIT

2004 BANDIT BEAST MODEL 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

BELL

1990 BELL SUPER T This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny has been rebuilt not long ago. Hour meter is inop. New paint.

PIPER’S Saw Shop

Runs perfect. Has heat and air, it just needs to be fixed.

Item ID 13896. Sam x702 1993 BELL SUPER T Good running condition. 33” Bar Saw. Tires at 50%. Deutz engine. Hour meter broken.

Item ID 13543. Sam x702

‘16 Halverson H140 BELL TREE(DEMO) CUTTER Skidsteer

Around hours on the Item ID:1000 JW-909632 machine.

New air cooled motor Contact: J Williams only about 300 hours.

Rebuilt Ph: (888) 401-6367 x701 dangling head. Several bars and chains. Machine came off the job in February and is field ready.

Item ID 13943. Austin x703

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

5 7 0 6 • 5 4 8 800 •

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Promotional Pricing Offer

Firewood Processor - This is

Simonds Red Streak Hard Back ‘05 Gehl CTL 70 1-1/4” x .042 x 3/4” or 7/8” Item ID: JW-986495 L im it e d Length 13’2”Contact: J Williams

im e Ph: (888) 401-6367T x701

‘83 John Deere 4850 Tell us you saw it here!

$14.71 $14.27 each

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot

O n ly

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Chipper - Cat Under Carriage at

Well maintained. Item ID 13294.

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

good condition. Just finished 10

Acre clearing job, ready to work!

Remote control. Big production

 Issue 364 1986 385 Lumbermens List exchange itbuy  to save arch with winch.

Low hours on ™  since Cat D5B Dozer❘ - Cat D5B s/n seLL  come hook up to and go your this skidder at only 3700. These

22X380, direct drive, EROPS,

1994 CATERPILLAR 320 Dry machine that is in good ‘95 John C6and condition for theDeere year. The stick bucket cylinder have been repacked.

Tree Farmer It has a thumb and bucket on it, Item 13920 also has ID: a 230 Waratah processing Contact: Austin head that can be sold with it.

Ph: (888) 401-6367 Hours are around 19k, x703 motor has been replaced a couple years back.

Machine is working daily. capacity!.

ID 13421.

Sam x702 Item IDItem 13936.

Austin x703

BARKO

1994 CATERPILLAR 1994 Barko 160B - Electric D4 HI

TRACK WITH GRAPPLE This is an extremely low hour motor, Rotobec continuous dozer/skidder with only 2800 grapple, 5,000Comes originalwith hours. actual hours. new 30” pads and chain.

Undercarriage (excellent condition.). Item ID is still Chris in excellent shape. Fixed 13238. x700 grapple and no winch.

1995 Barko 775 B Feller Buncher Item ID 13932. Sam x702 knuckleboom, 30' boom, 75hp

- Pumps recently redone. 400 hrs

on injection pump. always started 1996 CAT 214 MOBILE EXCAVATOR

with in 36’good magnet 3 order. tons 22in steel good. working

shear. head. low hrs! hard tires, kohing head All works great.

4 outriggers ideal for scrap business. It also has 48’ swavel 1999 Barko bucket for 160D street- new ditchengine cleanwith up. approximately 1500 hours.

Hour Item ID 13441.

Sam x702 Item ID 13185. Sam x702

meter dont work. The last 2 owners

515 or have1998 only CATERPILLAR used it to load trucks

CUMMINS continuous grapple.

This is a dual arch skidder with

50% or better. 475 hp Cummins

Value! PA. Item ID 12062. Sam x702

CATERPILLAR

Sam x702

but electronic option is available.

adjustable to single two way. Great

‘93 Barko 180B

99’ CASE 850G LONG TRACK DOZER Item ID: 14077 One owner machine, only Contact: Austin 3300 original hours, has never Ph: (888) 401-6367 x703 been used in the woods, it has a ripper on the back, original pads, and chains, Under carriage is new along with new rollers on the bottom, and new sprockets.

Item ID 13909. Austin x703

Diesel. 7500 Hours. One owner.

1999 Bandit 1900 Tracked Disc

Has Log Lift. Uses 4-way wedge

2006 CASE 440 SKID LOADER With only 871 hours, this machine starts, runs, and operates like new. I have many videos available and can be sent upon request.

Item ID 13886. Austin x703

Grapple with winch, no heat or air. Open cab skidder with 9800 delimber, grapple been rebuilt. hours. Tires are has 28L’s, rear 90% Boom cylinders minor and fronts arehave 30% withleaks. new bear paws chains.

Item ID 13694. Sam x702 Item ID Sam x702 94 Barko 27513801.

- Excellent value

Handles logs up to 32”. Uses

13HP Honda motor. Manual start

CASE

job site and put it to work to up

as a backup as needed. Has a CTR

with low at hours at 3,500. 5.9

2005 CATERPILLAR 525B

Runs Great!.

13740.skidder Sam winch.

VeryItem lowID hour

with 7900 frame hours and x702

only 63 hoursBELL on a new engine.

Continuous grapple, tires are 1990 Bell Super T - This Bell has 30.5’s @ 70%. This is a really anice brand new Duetz engine. skidder for the price.Lever control, pump andx702 tranny Item33” ID bar, 13816.

Sam ❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 9

is in top notch condition.

Item ID 13610. Sam x702

2007 CATERPILLAR D6N LGP Phone JEM DOZER ENCLOSED CAB315.284.4126 EXPORT LOG DEBARKING Overall: Cab Heat & AC, 150HP Fax LINE 315.849.2045 Cat C6.6L, 90% Undercarriage,Website Reconditioned 35 Nicholson GPS Ready, Sweeps & www.empirehyd.com Rear A-5 debarker, cab, infeed hour Email Screen, 13’6” PAT Blade, 39,500 “Precision Under Pressure” info@empirehyd.com glass rolls, log dischage belt with LBS, Hours: 7,867 Horsepower: side log kickers. Call 208-451150 S/N: ALY03028.

0365 for details. $279,000 Item ID 13567. Chris x700 JOHN DEERE

L’S FIREWOOD PROCESSORS

2004 JOHN DEERE 648GIII This machine has 13000 total hours on the body, with only 3000 hours on the new motor, comes with a set of chains, working daily.

‘16 H140 ItemHalverson ID 13878. Austin x703

‘92 JOHN DEERE 590 D CUTTER Will need pads in the future, sprockets and rails are about 85%, it has a 4cyl JD motor. It has a Rotnee dangle hd. w/ a bar saw and a spare idler.

Item ID 13612. Chris x700

2000 CAT 515 GRAPPLE SKIDDER One Owner Runs great! Is it an excellent condition. Rubber is around 75% Has new Hydraulic pump and Charge pump.

Item ID 13616. Sam x702

Skidsteer (DEMO)

2006 JOHN DEERE 700J DOZER Item ID: JW-909632 This work horse comes with a Contact: J Williams winch, and new undercarriage, Ph: (888) 401-6367 x701 it is tight and dry & running daily with 4500 hours.

Item ID 13883. Austin x703

4000 SERIES

CLARK

2012 JOHN DEERE 548GIII Single arch with winch, blade extensions, 1 new 28L and 3 @ 50%. This is still a new machine with only 3600 hours.

Item ID 13780. Sam x702 2009 JOHN DEERE 648H ‘93 Barko 180B This is a one owner machine, Item ID: 14077 every switch works, interior Austin isContact: very clean, radio, heat/ac.

Ph: ride (888)works 401-6367 x703 Air as it should.

Tires are 30.5x32. Extremely clean machine with no leaks.

Cutting edge on blade is excellent, with no cracks or welds anywhere.

Item ID 13747. Austin x703

BELL’S FIREWOOD PROCESSORS 2006 JOHN DEERE 748GIII

CLARK RANGER 665D Tight and dry machine, rebuilt motor. hour meter broken, It has a 353 Detroit, with grapple, and winch, always fires right up, and runs with no issues.

Item ID 13748. Austin x703

FRANKLIN

1995 JOHN DEERE C6 TREE 8700 hours, running daily.

1995 FRANKLIN 170 FARMER Item ID 13881. Austin x703 Enclosed cab, single archC6 with a ‘95 John Deere Only 20 hours on a new 5.9 winch, new paint, 4 brand new Cummins engine. The whole 2006 JOHN DEERE Tree Farmer 23.126 firestone tires, around center has been fixed, and line FIREWOOD PROCESSOR • 67 HP CAT Diesel 4000 SERIES Item hours.

ID: 13920 bolt redone, transmission is tight, This is a Chomper super 14, with 15000 Engine Item ID 13910.

Contact: AustinAustin x703 ‘13 KMC 2500 Track • 44”are Circular Saw It has a full center pins good. a 60hp engine. In very nice shape.

• 20” Diameter EARLY 70’S CLARK 664 Ph: (888) 401-6367 x703 speed tranny, with two reverse, Only Skidder Capacity 171 hours, comes with green CABLE SKIDDER 2003 FRANKLIN Q80 • Single Working Joystick with a winch. daily. chain All of the manuals Itemconveyer.

ID: 14078 Control some slack, needs front GRAPPLE SKIDDER • 67 center HP CAT Diesel 4000 SERIES Austin x703 13428 Victory Ln. // PO Box 124Item ID • 3013920.

Ton Splitter for the engine, and the chopper 7500 hours, but just 5000 hours Contact: Austin tires,Engine comes with a spare tire.

Cylinder capacity!. Item ID 13421. Sam x702 • 44” Circular AdamsSaw Center, NY 13606 itself come with it, as well as all of on reman engine. New Radiator; Ph: (888) 401-6367 x703 Gearmatic 19 winch doesn’t hold • 20” Diameter 2004 648GIII JOHN DEERE BARKO the electrical schematics.

Capacity good.

453 Detroit power unit.

New Hydraulic Pump; Comfort DUEL ARCH SKIDDER 1994 Barko 160B - Electric heat and Item ID 13894.

Austin x703 •Item SingleID Joystick cab with good working 13629. Sam x702 Slick Machine. Runs good motor Control knuckleboom, 30' boom, 75hp off onto a conveyor. This is a very air; Tires at 80%.

• 30 Ton Splitter Cylinder Item ID 12450.

Sam x702 motor, Rotobec continuous built processor.

ID 13820.

Many Models &well Options to ChooseItem From!

BELL’S FIREWOOD PROCESSORS

BELL’S FIREWOOD PROCESSORS

BELL’S FIREWOOD PROCESSORS Many Models & Options to Choose From!

BELL’S FIREWOOD FIREWOOD PROCESSORS PROCESSORS

• 67 HP CAT •Diesel 4000SERIES SERIES grapple, GRINDMASTER 5,000 original hours.

Sam x702 67 HP CAT Diesel 4000 Engine Engine SUDDRETH HORIZONTAL (excellent condition.).

Item ID Firewood Processor - This is FIREWOOD TUMBLER • 44” Circular Saw • 44” Circular Saw GRINDER • 20” Diameter • Sturdy HSS Steel Welded • 20” Diameter 13238.

Chris x700 a Chomper Model 16 PDA FIREWOOD TUMBLER This is a 60 HP low rpm Capacity Capacity • Sturdy HSS Steel Welded ‘05 Gehl CTL 70 1995 Barko 775 B Feller Buncher automatice firewood processor • Single Joystick• 4’ Diameter Barrel Horizontal grinder, comes Many Models & Options to Choose From!

• 4’ Diameter Barrel • HP CAT Diesel • Single Joystick 4000 SERIES • 67 67Control 4000 SERIES • Clean Out Chute Item ID: JW-986495 • Clean Out Chute Pumps recently hrs with John Deere power unit with Engine with a blower, redone. and the400blower Control •Engine 30 Ton Splitter • Removes Debris & Bark as large as 2 ¼” • Removes Debris & Bark as large as 2 ¼”connects to the grinder with Contact: J Williams • Circular Saw • 44” 44” Cylinder • 30 Ton Splitter on injection pump. always started low• hours.

Control panel includes Works with all of our Double chain Hydraulic Lift conveyors • 20” 20” Diameter • Works with all our 401-6367 Double chain Lift conveyors Ph:of(888) x701 Hydraulic Cylinder • • Optional Honda Power Pack Available a pipe. It has top and bottom good. in good working order. 22in tach, oil pressure, water temp and Capacity Capacity

BELL’S FIREWOOD PROCESSORS

‘83 John Deere • Optional Honda Power Pack Available • Single Single Joystick • FIREWOOD TUMBLER amp gauges. Cuts logs up to 16”.

4850 Control • Sturdy HSS Steel Welded • 67 HP CATControl Diesel 4000 SERIES

• 30 30 • Ton14073 Splitter Item ID: Engine Cylinder Cylinder • 44” Contact: Circular SawAustin Many Models • 20” Diameter Ph: (888) 401-6367 x703 Capacity • Single Joystick Control with 1700 hours, in very good • 30 Ton Splitter Cylinder condition. Easily produces high

chain conveyer,Barrel 8 way splitter, on • 4’ Diameter

One owner and comes with all

•Options Cleangoose Out neck trailer.

Item ID &20,000lb toChute Choose From!

manuals and receipts. Purchased

• Removes Debris & Bark as large as 2 ¼” 13916.

Austin x703 new forLift $32,500.

Item ID 13865.

• Works with all of our Double chain Hydraulic conveyors Made In • Optional Honda Power Pack Available Canada

Many Models & Options toPortable Choose Best Value LogFrom!

Splitter

Sam x702

- Small manufacturer in PA has

Many Models Many‘Cone’ Models && Options OptionstotoChoose ChooseFrom!

From! quality chips with patented drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

LOGGING EQUIPMENT BANDIT

FIREWOOD TUMBLER • Sturdy HSS valued Steel Welded made the best log splitter.

• Barrel Made In4’ Diameter Handles logs up to 32”.

Uses Call for 1999 Bandit 1900 Tracked Disc Please Details • Clean Out Chute Canada • Removes Debris & Bark as large as 2 ¼” FIREWOOD TUMBLER 13HP Honda motor. Manual start Chipper - Cat Under Carriage at • Works all of our Double chain Hydraulic Lift conveyors • Sturdy HSSwith Steel Welded Made In Optional Honda Pack Available but•electronic optionPower available.

50% or better. 475 hp Cummins • 4’ Diameter Barrel or Canada visit us is online www.bellsmachining.com

1-888-995-1965

Log Lift.Chute Uses 4-way wedge • Has Clean Out Financing FIREWOOD TUMBLER

Diesel. 7500 Hours. One owner.

Available

FIREWOOD TUMBLER • adjustable Removes Debris Bark as Great large asWell 2 ¼”maintained. Item ID 13294.

Many Models & Options to Choose From!

• Sturdy HSS&Steel Welded EDGERS & GANGS to single two way.

Sturdy Steel Welded • Works••with all HSS of our Double chain Hydraulic Lift conveyors 4’ Diameter Barrel • 4’Honda Diameter Barrel PA. Item ID Chute 12062.

Sam Sam x702 • Value!

Optional Packx702 Available • Clean Out Power • Clean Out Chute • Removes Debris Bark as Bandit 2 ¼” Beast Model 4680 in excellent condition.

Runs great.

Processor - This& is a as large 2004 Please Call for Firewood Details

Brewco Saws - Two Brewco Saws

Please Call for Details

1-888-995-1965 888-995-1965

• Removes Debris & Bark as large as 2 ¼” • Works with all of our Double chain Hydraulic Lift conveyors • Optional Honda Power Pack Available Canada •TUMBLER Optional Honda grapple, Power Packwith Available FIREWOOD PROCESSORS FIREWOOD 850 HP. 5300 hrs. Mill in log deck.

Has a hydraulic • Sturdy HSS Steel Welded or visit us online www.bellsmachining.com 2010 Shop Built Wood Processor • 4’chain and kicker good condition. Just finished 10 Diameter Barrelthat all runs off Financing Available • Clean Out Chute - It has a 353 Detroit diesel, 40 Acre clearing job, ready to work! of a 4 cylinder Mercedes power • Removes Debris & Bark as large as 2 ¼” Please Call for Details inch insert tooth circle saw, 30 foot • Works Remote control.

Big production unit. Has 4’ chain thatchain kicks Hydraulic withaall of oursaw Double Lift conveyors Made In • Optional Honda Power Pack Available Canada

Item ID 13644. Sam x702

Made In all engine homemade processor with a 10’ • Works with of our Double 3412 chainCaterpillar HydraulicDiesel Lift conveyors

nline www.bellsmachining.com Financing Available  Issue 364 385

1-888-995-1965❘

Lumbermens™  since 1986

In List Made or visit us online www.bellsmachining.com Canada Made In Canada Financing Available

 seLL  exchange  buy  save

infeed rolls. Overall lightly used, in really good shape. Width Item ID 13185.

Sam x702 capacity is around 30” maybe 1999 Barko 160D - new engine with even wider.

Item ID 13889. x703 approximately 1500Austin hours. Hour kohing head. head works great.

meter dontHYDRO-AX work. The last 2 owners

1998only HYDRO 611EX SAW have used itAX to load trucks or

HEAD FELLER BUNCHER with about 8800 hours. delimber, grapple has been rebuilt.

Bunching Saw Head has large Boom cylinders minor leaks. pocket for haveaccumulation and IDlifting sidex702 shield for Item 13694. Sam notching trees before 94 Barko 275larger - Excellent value felling.

Cummins engine.

28L with low at hours at 3,500. 5.9 tires at 60%. Decent running CUMMINS continuous grapple. condition.

Runs Great!.

Item ID Sam 13740.x702 Sam Item ID 13245. as a backup as needed. Has a CTR

x702

2002 HYDRO BELL AX 621E Arouund 12,000 hours on this 1990 Bell Super T - This Bell has machine. Working daily. a brand new Duetz engine. Lever Item ID 13884. Austin x703 control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

PUBLISHER

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR John Williams (888) 401-6367 ext. 701 j@lumbermens.co

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

SUBMISSIONS 2000AD W900 KW w/ May be sent to­ Rotobec MT27 morris@lumbermens.co HeavyPOSTMASTER Spec

Send address changes to:

Item ID: 13993 Exchange Lumberman's Contact:P.O. Austin Box 1916 Columbia, TN 38402 Ph: (888) 401-6367 x703

The Lumberman's Exchange is hours on this machine, in excellent published monthly

by Woods Publishing, P.O. Box 1916, condition.

Item ID 13937.

Austin Columbia, TN 38402. All rights reserved. All editorial/ advertorial x703 submissions are used at the discretion ofLIEBHERR the publisher and may be edited for purposes of clarity 2007 Liebherr A924C Log Handler and space. Although all efforts have Rubber Tired Log Loader.

13,000 been made to ensure accuracy of content submitted by advertisers hours. 40’ Reach with two section and writers, the Lumberman's boom.

60” Log Grappleand with Exchange, its principles associates, are not held liable for continuous rotation. Fixed Cab errors or omissions. Reproduction, Riser withorcab guard protection. in whole part, is prohibited with­ out written consent.

Front push blade. Tight and dry. ©2017 Woods Publishing

BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly

‘14 Hurdle 3-Hd has been rebuilt, it has a 24foot in Block Sawmill From Price To 10 hours on this machine since it

feed deck 2013997 foot out feed deck Item ID: 72ND ANNUAL GREAT LAKES Performance, with 44 inch wheels, Contact: Austin and all the LOGGING & HEAVY EQUIPMENT EXPO We’re A x703 Cord 2006 CAT 517 Ph:and (888) 401-6367 Thurs, 7 Sept - Sat, 9 Sept bells whistles, its a production Above The Rest!

Item ID: 13869 Escanaba, Michigan machine, with air strain conveyers Contact: Sam that go up and down, with airbags,  (888) Firewood Processors: Ph: 401-6367 x702 8 Models  Firewood Cleaners MID-ATLANTIC LOGGING & BIOMASS it includes two sets of Mcdonough Fri, 15 Sept - Sat, 16 Sept Firewood Conveyors: 12’, 20’ & 30’  Operator’s Cabs

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment 30+ at Years www.LumberMB\ISmagazine.com Strong!

MID-ATLANTIC

LOGGING & BIOMASS EXPO

pressure guides. Top Casting wheel Selma, North Carolina  Firewood & Log Grapples  Free DVD www.midatlantic-logging-biomass­ is supported on both sides. This expo.com/ is an extremely accurate machine

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 Lexington, Kentucky http://www.kfia.org/ Portable • DePenDableS •& W low ainte nance 125M Band Mill with KentuckyWoodExpo.aspx Firewood Proc.

Caterpillar generator - Low hours 888-SPLITTER (888-775-4883) Item ID: 13865

on the mill, computer Set THE PAUL BUNYAN SHOW 319-986-5525 Local • 2756 Kentucky Ave, electronic Mt Pleasant, IA Contact: Sam works,1 1/2" or 2" band, 22ft. track Fri, 6 Oct - Sun, 8 Oct Ph: (888) 401-6367 x702

blockbuster-inc.com Cat 3406 140KW Genset, 12,400

Cambridge, Ohio

‘14 Komatsu WA200 hours ready to run. Item ID 13434. www.ohioforest.org 100 WWW.TREETRADER.COM ~ The World’s Largest W Loader Sam boomx702 loader, 3 knife disc, Newer

** INFO LINK** B & B Mfg. ............................... 18

B. H.CAT Payne ..............................

16 ‘04 953C FrontBaker ......................................

5, 7 end Loader

One Owner, low hours!

Item ID: 14010 Contact: Austin Ph: (888) 401-6367 x703

M&F Gauge ............................. 28 Meadows Mill, Inc. ................ 33 2011 Liebherr A924 Rubber Tired Menominee Saw ..................... 29 Log Handler. Liebherr 4 cylinder Metal . ..............

30 engineDetector's with greatInc fuel economy.

Bell's ID: Machining Item 13854 ..................... 27 Contact: Sam Brute Force Mfg. ..................... 31 Midwest Sharpening ..............

26 11,230 hours.

Fixed cab riser. Two Ph: (888) 401-6367 x702 Buck Equipment (AIM) ........ 36 Mor barkboom .....................................

9 section with 38’ reach. Cab Corley Mfg .............................. 32 trailer. drive.................... and steering.

CRD 4-Wheel Metalworks 25

protection.

4-Wheel drive and 12 Multitek ................................... steer. Push pull loaded Piper's Sawblade.

ShopCan ....................

13

Top Quality machine. Would be CW Mill-ArmorHog .............. 17 great for log yard or mill work.

CW Mill-Hogzilla ................... 15 Item ID 13476. Sam x702 Dyna Products ........................ 35 2011 Liebherr A904 Rubber Tired Empire Hydraulics Log Handler.

Liebherr...................

4 cylinder 8

trailer. Cleaned, serviced and Rotochopper............................ 40 inspected. Tight and dry and ready Row Electric ............................ 20 for work. Located in Baltimore, Sawmill Exchange .................. 11 MD. Item ID 13478. Sam x702 Select Sawmill ......................... 19 LINK-BELT

11,230 Fixed cab riser. Two 3 Hahnhours.

Machinery ...................... section 38’ reach. Cab14 Hurstboom Boilerwith .............................

Pierce Stroke Delimber.

Pads The Paul Bunyan Show36” .........

39 on 60% undercarriage.

5221 hours.

Thomas Industrial Controls..... 10

Greatwith Lakes Mfg . .................... engine great fuel economy. 34

protection. 4-Wheel drive and Iron Bull ................................... 21 steer. Can pull loaded trailer.

Kilgore Saw ............................. 22 Cleaned, serviced and inspected.

Lignomat ................................. 24 Tight and dry and ready for work.

Smith Sawmill3400 ...........................

1997 Linkbelt has rebuilt 4

Good running condition. Owner Union Grove Saw & Knife.. 2, 37 just spent $30,000 on upgrading Universal Refiner ................... 23 delimber. Item ID 12992. Sam x702 WoodMizer ................................ l

MORBARK

Located in Baltimore, MD. Item ID Cleaned, Serviced, and Checked 1987 Morbark 27 WCL NEEDS out FORESTRY EQUIPMENT FOR SALE ❘  SELL YOUR EQUIPMENT TODAY - Morbark ❘ 0  24/7 - USED SALE l§ TODAY SUPPORT 13477. Sam x702 for service. Can pull loaded MOTOR 1000 SUPPORT Knuckle

CARRIAGES & DRIVES discharge chute, New banding 2010 Cardinal HD Carriage around disc, Brakes and tires are

Carriages (Sawmill) -works Cardinal also OK, Everything well Carriageclutch line it--includes carriage Newer with outboard

with onboard log turners, carriage bearing, Had Cummins KTTA 750 drive, hyd pac for carriage, HP engine -- needs repower. Item

sawyers cab, computer controls, ID 12443. Sam x702 cabinet with electronic drives for 1997 Morbark Model 2400 Chipper carriage knees, husk including - Has a Cumins diesel engine and 48" bottom saw and 36" top saw runs great. All fluids and filters

have been changed. Item ID 13429.

STACKING RAC

Sam x702

1999 Morbark 1400 Tub Grinder Loader w/Cab; 4200 hours; Very good condition. Located in PA. Item ID 13361. Sam x702

2006 Morbark 6600 Horizontal

Grinder - Approx. 6000 hours on this well maintained machine.

Has New Cat Dealer Rebuild

1000HP Engine at 5000 hours.

42” X 66-5/8” HAMMERMILL;

VARIABLE SPEED INFEED www.BakerProducts.net SYSTEM; HAMMERMILL 800.S48.6914 I S73.663.7711 DRIVE INCLUDES ALL BELTS, ❘ SHEAVES,  (888) BUSHINGS 401-MENS L! 401-MENS & NO. 11

1998 711EX SAW HEAD 2012 KOMATSU Phone FELLER BUNCHER 315.284.4126 D61EX 15 DOZER 30.5-32 tires at 40%; Cummins Faxwith only 750 Hours. Triple Rippers; 315.849.2045 Engine rebuilt 1500 hours ago;Website Limb Sweeps; Enclosed cab with www.empirehyd.com 8750 hours; Quadco 22” Large Heat/AC; 6 way blade; Undercarriage tree“Precision saw head.

Heat andinfo@empirehyd.com A/C Email at 90%; Excellent Condition!

Under Pressure” work. New bearings in saw.

Item ID 13459. Sam x702 Cutting trees today.

Item ID 13353. Sam x702 2014 KOMATSU 450 KMC Only 1100 hours on this KMC TRACK SKIDDER 2500P machine, in excellent condition.

Item ID 13937. Austin x703 John Deere Dual Arch Grapple, LIEBHERR John Deere winch, Model 4000, Cummins Engine, Model 6BTA, 2007 LIEBHERR A924C Clark Transmission 28000.

LOG HANDLER RUBBER Item ID 13738. Austin x703 TIRED LOG LOADER KOMATSU 13,000 hours. 40’ Reach with two section boom. 60” 2007 KOMATSU PC220LC w/2009 Log Max 7000XT Log Grapple with continuous processing head. 9700 hours on rotation. Fixed Cab Riser with carrier. 7200 hours on Log Max. cab guard protection. Front push Excavator style. Cab guard. blade. Tight and dry. Cleaned, Flotation pads. One owner. Very Serviced, and Checked out for service. Can pull loaded trailer. good condition.

4-Wheel drive and steering.

Item ID 13464. Sam x702 Top Quality machine. Would be 2008 KOMATSU D61-EX DOZER great for log yard or mill work.

Item ID 13476. Sam x702 Great13428 Condition.

Victory 4511 Ln. // Hours.

PO Box 124 KomatsuAdams U/C atCenter, 95%. 35% Pads.

NY 13606 2011 LIEBHERR A904 6 Way Blade. Fully Enclosed RUBBER TIRED LOG HANDLER comfort cab. Great price!

Liebherr 4 cylinder engine with Item ID 13570. Sam x702 great fuel economy. 11,230

hours. Fixed cab riser. Two section boom with 38’ reach.

Cab protection. 4-Wheel drive and steer. Can pull loaded trailer. Cleaned, serviced and inspected. Tight and dry and ready for work. Located in Baltimore, MD. Item ID 13477. Sam x702

‘16 Halverson H140 2011 LIEBHERR A924 Skidsteer (DEMO)

TIRED LOG ItemRUBBER ID: JW-909632 HANDLER Contact: J Williams Liebherr cylinder engine Ph: (888)4 401-6367 x701 with great fuel economy. 11,230 hours. Fixed cab riser. Two section boom with 38’ reach.

Cab protection. 4-Wheel drive and steer. Push blade. Can pull loaded trailer. Cleaned, serviced and inspected. Tight and dry and ready for work. Located in Baltimore, MD. Item ID 13478. Sam x702 LINK-BELT ‘13 KMC 2500 Track 1997 LINKBELT 3400 HAS Skidder REBUILT PIERCE STROKE

Item ID: DELIMBER 14078 Contact: 36” Pads onAustin 60% undercarriage.

Ph: (888) 401-6367 5221 hours.

Goodx703 running condition. Owner just spent $30,000 on upgrading delimber. off onto conveyor. a very ItemaID 12992.This Samisx702 well built processor. Item ID 13820.

Sam x702

Shrink Wrap

Firewood Processor - This is

‘05 Gehl CTL 70

a Chomper Model 16 PDA

automatice firewood processor FireWOOD/WaSteWOOD Item ID: JW-986495 with John Deere power unit with

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sell Your WOOD – $300/cord or More!

- Small manufacturer in PA has LOGGING EQUIPMENT

with 1700 hours, in very good

Best Value Portable Log Splitter

Sam x702

BANDIT

MORBARK

1987 MORBARK 27 WCL NEEDS MOTOR Morbark 1000 Knuckle boom loader, 3 knife disc, Newer discharge chute, New banding around disc, Brakes and tires are also Everything works well ‘93OK, Barko 180B Newer clutch -with outboard Item ID: 14077 bearing, Had Cummins KTTA 750 Contact: Austin HP engine -needs repower.

Ph: (888) 401-6367 x703 Item ID 12443. Sam x702 1997 MORBARK MODEL 2400 CHIPPER Has a Cumins diesel engine and runs great. All fluids and filters have been changed.

Item ID 13429. Sam x702 MORBARK 1400 ‘951999 John Deere C6 TUB GRINDER Treew/Cab; Farmer Loader 4200 hours; Very

Item ID: 13920 good condition.

Located in PA. Contact: Austin Sam x702 Item ID 13361.

Ph: (888) 401-6367 x703 2006 MORBARK 6600 HORIZONTAL GRINDER Approx. 6000 hours onSam thisx702 well capacity!.

Item ID 13421. maintained machine.

Has New Cat BARKO Dealer Rebuild 1000HP Engine 1994 Barko 160B - Electric at 5000 hours. 42” X 66-5/8” knuckleboom, 30' boom, 75hpinfeed Hammermill; variable speed motor, continuous system;Rotobec Hammermill drive includes all belts, sheaves, bushings & shields. grapple, 5,000 original hours.

Engine gauge panel & emergency (excellent condition.). Item ID shut down system located in an 13238. Chris x700 anti-theft console.

Electronic 1995 Fellerfeed Buncher rpm Barko sensor775 & Bauto system.

-430 Pumps recently 400Gallon hrs Gallon fuel redone. tank. 238 hydraulic oil tank.

IQAN control on injection pump. always started system.

Dust working suppression system. good. in good order.

22in Hyd operated debris containment kohing head. head works great. door. 16 Function radio remote.

‘97IDpackage!

Timberjack Item 13185. Sam x702 new knife Super Optional 1999 Barko 160D new with skin $20,000 which is engine half price of 360C new. approximately 1500 hours. Hour Item ID: 14044 Item ID 12692.

Contact: SamTheSam meter dont work. last 2x702 owners Ph: only (888) 401-6367 have used it to loadx702 trucks or

MORBARK 1200 TUB GRINDER

Double or triple your profits by shrink wrapping wastewood - foreHandles logs up to 32”. Uses 1999 Bandit 1900 Tracked Disc wood with WOOD-PAKer! Attractive various size packages can be drum design. Can easily load 42’ 13HP Honda motor. Manual start Chipper - Cat Under Carriage at obtained with our highbutproduction, easily operated and affordable vans and produce 6 - 8 loads per electronic option is available.

50% or better. 475 hp Cummins Eightx703 machines available.

Thewedge ideal equipment for producDiesel. 7500 Hours.

One owner. day.machines.

Item ID 13882. Austin Has Log Lift. Uses 4-way ingEDGERS square bundles-palletizable in Great storage transporting. & GANGS adjustable to for singleease two way.

Welland maintained.

Item ID 13294.

Brewco Saws Two Brewco Saws Value!

PA. Item ID 12062.

Sam x702 Sam x702 Inquire for free details. Video and Package samples at nominal fee.

as a backupbyasaneeded.

Hasengine, a CTR Powered 3412 Cat

Item ID x702 Caterpillar Diesel engine homemade with a 10’ B13644. & BSam Manufacturing • 3007processor West River Road3412 • Olean, NY 14760

on new 4 cylinder engine.

Item ID:JD 14024 x702

condition. Easily produces high

quality chips with patented ‘Cone’

in excellent condition. Runs great.

FIREWOOD PROCESSORS

made the best valued log splitter.

Firewood Processor - This is a

2004 Bandit Beast Model 4680 -

log deck. Has a hydraulic grapple,

with 850 HP. 5300 hrs. Mill in

of a 4 cylinder Mercedes power

Acre clearing job, ready to work!

Toll Free 1-800-654-5320

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

chain and kicker that all runs off

good condition. Just finished 10

E-mail: bbmfg@verizon.net • Web: www.bbmfg.org inch insert tooth circle saw, 30 foot Remote control. Big production unit. Has a 4’ chain saw that kicks  Issue 364 385

Lumbermens™  since 1986

❘

 List  seLL  exchange  buy  save

delimber, has been rebuilt.

600-hp. grapple Tilt tub.

Hours are

unknown.

Please Daren Boom cylinders havecall minor leaks.at Ext. 702 for more details.

Item ID 13694.

Sam x702

Item ID 12919. Sam x702

94 Barko 275 - Excellent value WOLVERINE with low at hours at 3,500. 5.9

1995 MORBARK WOLVERINE

CUMMINS continuous grapple.

3-WHEELED FELLER BUNCHER

John Deere Runs Great!.

Item ID548D 13740.

S/N 4073.

Only 1000 Sam hours

Recently Contact:replaced Sam BELL turbo. 23.1 tires at 50%.

16” Rapid Buncher Ph: (888) 401-6367 x702 1990 Bell Super T - This Bell has shear head. Machine is fast aand brand new Duetz Lever in very good engine. condition.

Has a 2000 hour warranty. It comes control, pump andx702 tranny Item33” ID bar, 12531.

Sam mounted on 30.5 tires at 95%.

Comes with a 22” tower head. Item ❘  LumbermensCO.com ID 13864. Sam x702 2015 John Deere 748L - This is

**

IntegrIty • PrecIsIon • QualItyCALENDAR** • Value NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

Woodmaster

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

Tree See why The we are your BeSt Source for bandsaw blades!

Hot Springs, Arkansas www.arkloggers.com

that Started We offer the highest quality welds and our people use the it All!

highest level of integrity and precision to give you the best 72ND ANNUAL GREAT LAKES Since 1986, Lumbermens has & HEAVY EQUIPMENT EXPO bandsaw blades in the business—we ship all over the LOGGING US. published a monthly circular Wood-Mizer LT40 Thurs, 7 Sept - Sat, 9 Sept Satisfaction reaching sawmills, loggers, always guaranteed!

Escanaba, Michigan Item ID: 13995

pallet makers, recyclers and industrial woodworking plants worldwide.

Contact: Austin MID-ATLANTIC LOGGING & BIOMASS Ph: (888) 401-6367 x703 Fri, 15 Sept - Sat, 16 Sept

thIn Kerf

PUBLISHER

Woods Publishing

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

Band saw Blades MID-ATLANTIC

ADVERTISING SALES

LOGGING & BIOMASS EXPO

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co John Williams (888) 401-6367 ext. 701 j@lumbermens.co

DESIGN DIRECTOR

ck Donna Heninger Cheut Our Quality • O

EQUIPMENT REPS

THE PAUL BUNYAN SHOW

Item ID: 14039 All Sizes Available!

Contact: Austin TOP PERFORMING, economical blades for all primary & Ph: (888) 401-6367 x703 secondary wood processing. Welded to your lengths!

....and just about any Custom Saws you need 1998longer...

Hydro 611EX Saw Head to keep cutting Mfg. ...............................

18you M&F GaugeAx .............................

28 for less. Ask about FREE Shipping!

Feller Buncher with about 8800 Meadows Mill,- Inc . ................

33 hours. Bunching Saw Head has Baker ...................................... 5, 7 Menominee Saw ..................... 29 large pocket for accumulation and Bell's Machining ..................... 27 Metal Detector's Inc. .............. 30 lifting side shield for notching Brute Force Mfg. ..................... 31 Midwest Sharpening.............. 26 larger trees before felling.

Item ID: 13855 Buck Equipment 36 Mor bark ..................................... 9 Contact: Sam (AIM) ........

Cummins Call Marvin Miller for a quoteengine. 28L tires at 60%.

B. H. Payne .............................. 16

AD SUBMISSIONS ‘06 Western Star May be sent to­ Michigan Special morris@lumbermens.co

‘08 John Deere CT332

Item ID:POSTMASTER 14011 Send address Contact: Austinchanges to: Lumberman's Exchange Ph: (888) 401-6367 x703

231-924-5953 (fax) 231-924-6166 / 11606 Brickyard Road • Holton, MI 49425 ©2019 Wood-MizerMfg LLC Corley .............................. 32 Multitek ................................... 12

Ph: (888) 401-6367 x702

that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine

Contact: works,1 1/2"Sam or 2" band, 22ft. track

We also offer expert sharpening services, plus...

B&B

machine, with air strain conveyers

‘90 Bell Super T

Gang • Edger • Scragg • TrimSam • Split • Strob 13799. x702

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

Ph: (888) 401-6367 bells and whistles, its a x702 production

on the mill, electronic computer Set Item ID: 13896

BLADES ** INFO LINK** MAILING ADDRESS

Contact: with 44 inchSam wheels, and all the

Caterpillar generator - Low hours

Cambridge, Ohio

BANDSAW

feed deck foot out feed deck Item ID:20 13908

S & W 125 Band Mill with

‘89 Timberjack 380A www.ohioforest.org

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

84/85 John Deere has been rebuilt, it has a 24foot in 440B/C 10 hours on this machine since it

Item ID 13876. Austin x703

Our Service • Our Price Fri, 6 Oct - Sun, 8 Oct

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Danckaert Band Resaw - Roughly

feet a minute also has CLT presses.

http://www.kfia.org/ KentuckyWoodExpo.aspx

1-888-857-5153

BANDMILLS & HEADSAWS

in ve1y good condition, Cuts 130

KENTUCKY WOOD EXPO Ask About Our Fri, 15 Sept - Sat, 16 Sept Dismanteling Blades Lexington, Kentucky

MARKETING DIRECTOR

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

Ph:3406 (888) 401-6367 Cat 140KW Genset,x702 12,400

hours ready to run. Item ID 13434.

Sam John x702 Deere Dual Arch Grapple,

CARRIAGES & DRIVES John Deere winch, Model 4000, 2010 Cardinal HD Carriage Cummins Engine, Model 6BTA,

Carriages (Sawmill) - Cardinal Clark Transmission 28000. Item ID Carriage line it includes carriage 13738. Austin x703 with onboard log turners, carriage

KOMATSU

drive, hyd pac for carriage, 2007 Komatsu PC220LC w/2009 sawyers cab, computer controls, Log Max 7000XT processing head. cabinet with electronic drives for 9700 hours on carrier. 7200 hours carriage knees, husk including on Log Max. Excavator style. Cab 48" bottom saw and 36" top saw guard. Flotation pads. One owner.

STACKING ROW ELECTRICAL EQUIPMENT, RAC INC.

P.O. Box 1916 Columbia, TN 38402

CRD Metalworks .................... 25

x702 The Lumberman's Exchange is

HydroAx 611B - New injectors, CW Mill-ArmorHog .............. 17 injector pump. New 5.9 cummins15 CW Mill-Hogzilla ...................

published Woods 2004 Hydromonthly Ax 470 by - This cutter Publishing, P.O. Box 1916,

has around TN 7000 hours. a clean Columbia, 38402.

All It’s rights

13245. Sam Piper's Sawx702 Shop.................... 13

2002 Hydro Ax 621E - Arouund40 Rotochopper ............................

12,000 hours on this machine. 20 Row Electric ............................

Very good condition. Item ID 13464. Sam x702

2008 Komatsu D61-EX Dozer

- Great Condition. 4511 Hours.

engine. Rebuilt hydraulic pump Komatsu U/C at 95%. 35% Pads. 6 Working daily. Item ID 13884.

Dyna Products ........................ 35 Sawmill Exchange .................. 11 and new teeth. Item ID 13768.

Sam Way Blade. Fully Enclosed comfort Austin x703USED, RECONDITIONED: YOUR SOURCE FOR Empire Hydraulics ................... 8 Select Sawmill ......................... 19 • Squirrel Cage Motors • DC Motors Crane and Mill • Transformers, Three-Phase x702 cab. Great price!.

Item ID 13570.

1998 711EX Saw Head Feller • Gear Speed Drives •4 Across/Line Magnetic Starters Great LakesMotors Mfg. .................... 34• Adjustable Smith Sawmill ...........................

1999 Hydroax 511EX - New Sam x702 Buncher - 30.5-32 tires at 40%; • Wound-Rotor Motors • Generators - AC and DC • Reduced Voltage Starters Paul Bunyan Show .........

39 Hahn Machinery ......................

3 The cummins engine with only 1500 2012 Komatsu D61EX 15 Dozer Cummins Engine rebuilt 1500 • Synchronous Motors • Engine-Generator Sets • Safety Switches • Caterpillar DC Motors Single Phase • Phase Convertors Hurst Boiler .............................

Thomas Industrial Controls ..... 10 hours. just replaced 14• Transformers, hours ago; 8750 hours; Quadco with only 750 Hours. Triple

reserved. All editorial/ advertorial

and tight machine. Only reason submissions are used at the

discretion of the publisher andItem may selling is due to an upgrade. be edited for purposes of clarity

IDand 13846.

Sam x702 all efforts have space.

Although beenHydro made to of 2004 Axensure 670 - accuracy Engine has content submitted by advertisers

about 500 hours, new saw motor and writers, the Lumberman's

Exchange, principles and owner and disc lastitsyear.

Previous

Decent running condition. Item ID

gear box to ................................... hydraulics at the2812 end21• Toledo, 22” Large tree43606 saw& head.

Heat Rippers; Limb Sweeps; Enclosed P.O. Box Ohio Iron Bull Union Grove Saw Knife .. 2, and 37 associates, are not held liable for ax to had theor hydrastats This ofKilgore summer.Saw 11000 hours total on 22 Universal cab with Heat/AC; 6 way blade; A/C work.Refiner New bearings in saw. errors omissions.redone.

Reproduction, WWW.RoWELECTRiCAL.CoM ............................. ...................

23 in whole or part, is prohibited with­ 419-248-4479 rowelec@glasscity.net has a 22” high capacity head and is cutter.

Tires are 28L’s @ 80%, 2 Undercarriage at 90%; Excellent Cutting trees today. Item ID 13353. www.BakerProducts.net Lignomat ................................. 24 WoodMizer ................................ l out written consent.

800.S48.6914 I S73.663.7711 a very clean©2017 machine.

Mounted on @ 40% and one slick.

Brand new Condition!.

Item ID 13459. Sam Sam x702 WE ANSWER THE PHONE 24 HOURS • WE BUY USED ELECTRICAL Woods Publishing

F

:

419-244-8887

800-248-4479

KMC 34’s with 50% tread. Item ID 13828. center section. 20” single post - USED FORESTRY EQUIPMENT FOR SALE  SELL YOUR EQUIPMENT TODAY TODAY ❘ 0  24/7 SUPPORT SALE ❘ l§ SUPPORT KMC Track Skidder 2500P Sam x702 head. Heat and air work. Item ID

x702 ❘ L!  (888) 401-MENS NO. 13 401-MENS 2014 Komatsu 450 - Only 1100

“Precision Under Pressure”

SELECT Sawmill Co.

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

stocks double-cut saw blades (19-feet-4-¾ inches) and (21.3 feet) long

The selection of swage-toothed wide bands are made Barko 180B from high carbon nickel alloy‘93 steel and have the best ‘16 Halverson H140 Item ID: 14077 butt weld in the industry. The quality of the welds are Contact: Austin a criteria for(DEMO) preventing abnormal wear of the guide Skidsteer Ph: (888) 401-6367 x703 blocks and minimizing excess noise.

Both 4 inch and Item ID: JW-909632 6 inch wide blades are kept in stock at all times.

The Contact: J Williams 6 inch are available in lengths 19 ft 4-3/4” (18 Ph: (888) blades 401-6367 x701 & 19 ga) and 21.3 ft (18 ga), ‘04accommodating Woodmizerboth SELECT and HEARTWOOD brand sawmills. For those LT70 Hydraulic 1988 John Deere cutting very dense wood, 6 inch stellite-tipped blades ID: 13940 are also kept in stock. TheItem company ships directly 440D Contact: Austin from their warehouse in Ontario, Canada and offer Item# 13781 Ph: (888) 401-6367 x703 competitive pricing on blades as well as freight Contact: Sam ‘95 John Deere C6 services to locations worldwide.

Ph: (888) 401-6367 x702

Tree Farmer

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

Trelan BARKO Chipper 866-724-7600 1994 Barko 160B - Electric

Item ID: 13866 www.selectsawmill.com knuckleboom, 30' boom, 75hp

off onto a conveyor. This is a very

Now One Phone Puts You in Touch with ThE‘05Single Source Gehl CTL 70 Item ID: JW-986495 for all your Sawmill Needs!

Contact: J Williams Ph: (888) 401-6367 x701 Sawmill maChinery ‘83Corley John Deere

Tyrone Berry Carriage DriveS lewiS ConTrolS opTimizaTion chain conveyer, 8 way splitter, on

4850 ‘88 John Deere 440D ‘94 ItemCaterpillar ID: 14073 20,000lb goose neck trailer. Item ID Contact: Austin Carriage Linear & Set Shaft Skidder 320

13916.

Austin Ph: (888) x703 Lewis401-6367 Controls “Electronics for sawmills byx703 sawmillers” ID: 13781 Item Tyrone-Berry ID: 13936 Carriage Drives &Item Parts • Headrig Best Value Portable Log Splitter Contact: Sam Slabbers Contact:Log Austin Turners • Bandmills & Linebar Resaw Systems Ph: (888) 401-6367 with 1700 hours, in very good Small manufacturer inx702 PA has Ph: (888) 401-6367 x703 Board & Gang Edgers • Trimmers condition. Easily produces high

made the best valued log splitter.

motor, Rotobec continuous Ph: (888) 401-6367 x702

Firewood Processor - This is

One owner and comes with all

(excellent condition.). Item ID Mud Tracks. Front blade. Hood 13238. Chris x700 guard. Item ID 12267. Sam x702 1995 Barko 775 B Feller Buncher 2005 Valmet 941 Harvester - Totally - Pumps recently redone. 400 hrs refurbished head to toe! Very good on injection pump. always started running condition. Over $50,000 in good. in good working order. 22in recent updates and maintenance. kohing head. head works great.

New ID center pinSam bushings; Item 13185. x702 new

Item ID:with 13851 Equipped 18” Waratah High Sam x702 Contact: Sam SpeedLOGGING Disc Saw. EQUIPMENT 28L x 26 Tires at

Ph: (888) 401-6367harvesters. x703 Largest of rubber meter dont work. tired The last 2 owners Has Valmet 370.2 processing head have only used it to load trucks or

Sam x702

a Chomper Model 16 PDA

automatice firewood processor

58” Precision Chipper low hours. Control panel includes with John Deere power unit with

Item 13975water temp and tach, oilID: pressure, Contact: Austin Ph: (888) 401-6367 x703

amp gauges. Cuts logs up to 16”.

‘03 John Deere 748GIII

manuals and receipts. Purchased Reman Engine. new forCummins $32,500. Item ID 13865.

Ph: (888) 401-6367 x702

40% completeBANDIT with chains. This

inLine very good shape and Uses has been quality chips The with patented ‘Cone’ Handles logs up to 32”.

Most Complete of Sawmill

machine has1900 beenTracked extremely well 1999 Bandit Disc

vans and produce 6 - 8wheels. loads per but option is available. transmission.

14 hole Tires Samelectronic x702 Single Machine or Complete Turn-Key Operation day.

Item ID 13882.

Austin x703 Has Log Lift.

Uses 4-way wedge are 30.5’s at 55% and one at 80%.

‘98 Timberjack 1270B - 7,300 hrs.

50% 475 hp Hardortobetter. find them in Cummins this good Diesel.

7500 Hours.

One of condition. Has a twin owner. that is

drum design.

Can easily load 42’ 4000 hours.

Torque convertor Machinery

13HP Honda Manual start well maintained.

Item ID 12194.

Since 1905! motor.

More Production & Profit adjustable is Only One Call EDGERS & GANGS to single twoAway way.

Center has very little slack. This Perkins 6 Cylinder Engine.

AllGreat For Parts, Service & Sales Brewco Saws Two Brewco Saws Value!

PA. Item ID 12062.

Sam x702 skidder has been a back up skidder modules and computer are brand

Call (423) 698-0284 CORLEY VALMET

in condition.

Runs great. forexcellent the several years. Skidder has Item ID 13644. Sam x702 12000 hours. Item ID 13805. Sam

FIREWOOD PROCESSORS x702

Firewood - This is a new. TiresProcessor on average are around homemade processor with a 10’ 80% Video: http://youtu.be/R_ log deck. Has a hydraulic grapple, MQZe5QEFw. Item ID 13572. Chris chain and kicker that all runs off x700 of a 4 cylinder Mercedes power

mfg

2010 Shop Built Wood Processor 1981 Timberjack 520 - Very hard to - It has a 353 Detroit diesel, 40 come by! 653 Detroit. Runs Great!. www.corleymfg.com inch insert tooth circle saw, 30 foot • sales@corleymfg.com unit. Has a 4’ chain saw that kicks 1998 Valmet 603 3-Wheeled Item ID 13741. Sam x702

Contact: Sam

well built processor. Item ID 13820.

Chipper - Cat Under maintained and runs Carriage very well.at

Well maintained.

Itemtwo ID 13294. available if you need units.

Sam x702 Item ID 12524. Sam x702

2004 4680 2005 Bandit ValmetBeast 860.1 Model 8-Wheeled 3412 Caterpillar Diesel engine Forwarder - 17,800 hours. New with 850 HP. 5300 hrs. Mill in hydraulic transmission and gear good condition. Just finished 10 box in 2013. $70,000 of updates in Acre clearing job, ready to work!

2004 John Deere 2012.

Bogies just resealed.

Spare Remote control. Big production 648G III pump ($7,000 value) Good running

Item ID: 13878 Buncher - 6500❘ hoursonList total seLL  2002 Timberjack with hot saw condition.

Sisu  engine uses 4 gal/  Issue 364 Lumbermens ™  since 1986 385 608s exchange Contact: Austinbuy  save machine but no hours on 4BT3.9 - Approx. 6000 hours, Machine is hour.

16 ton capacity.

One set of Ph: (888) 401-6367 x703

grapple, 5,000 original hours.

‘89 Cat D4H LGP

bogey seals; valves resealed; allwith Item ID:160D 13999 1999 Barko - new engine Contact: Austin cylinders packed.

10,200 hours. approximately 1500 hours. Hour

with less than hours. as a backup as 4000 needed.

HasEngine a CTR

runs well.grapple Tires at has 50%.been Thisrebuilt. is a delimber,

Boom hard tocylinders find gemhave and minor pricedleaks. below

Sc Gr

Ite Co Ph

Item ID 13694. x702Sam x702 market.

Item IDSam 12569.

94 Barko 275 Excellent 2005 Valmet/Timbco 415value Harvester with hours- 15,400 at 3,500.

5.9 with low 370EatHead hours.

‘04 Hood Loader CUMMINS continuous grapple.

370E Harvesting head just added

28000 Runs Great!.

Item ID hours.

13740. Sam in 2010 and has 7000 36” Item ID: 13971 x702 Triple Grouser tracks rebuilt one Contact: Austin BELL

year and401-6367 are at 80%.x703 Sisu Ph: ago (888) 1990 Bell Super T - This Bell has engine that is very stingy on fuel. a brand new Duetz engine. Lever 8’ squirt at pads. end ofItboom for 30’ hours, 36” does have some control, 33” bar, pump and tranny reach.leaks.

Reversible fanisand auxiliary small Owner going back to cutters because oil❘rubber cooler.

Still runs OK. Cuttinghis  tired LumbermensCO.com job hasbut changed.

Itemsome ID 13898. today will needs basic Sam x702

20 53

Ite Co Ph

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers

‘05 Tigercat 230B

‘97 Prentice 210E

that go up and down, with airbags,

Item# 13795

MID-ATLANTIC

LOGGING & BIOMASS EXPO

itContact: includes two sets of Mcdonough Sam

pressure guides.

Top Casting Ph: (888) 401-6367 x702 wheel

Selma, North Carolinax703 Ph: (888) 401-6367 www.midatlantic-logging-biomass­ expo.com/

is supported on both sides. This

Every Reputable2006 Wide Band Planer - This is a 10” is an Logosol extremely accurate machine Supplier Offers 4insided ve1y planer good condition, Cuts 130 that has removable KENTUCKY WOOD EXPO

feet aSteel minutethat also hastake CLTup presses. side cutters will to Fri, 15 Sept3- High Sat, 16Quality Sept Swedish Itemlumber ID 13876. x703 Lexington, Kentucky andAustin includes a blower 3 3” – 8” Band Width 12” http://www.kfia.org/ S & W 125 Band Mill with system.

Item ID 13428.

Sam x702 3 16 to 20 Gage KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Caterpillar generator - Low hours 3 Double Cut Options POLE & POST PEELERS on the mill, electronic computer PS8 Post Peeler - This peeler has Set THE PAUL BUNYAN SHOW 3 Choice of Swage orworks,1 Stellite ‘99 Hydro-Ax 1/2" or 2" band, 22ft. track

‘06 Brewco B1600 DESIGN DIRECTOR Donna Heninger Resaw

Fri, 6 Oct - Sun, 8 Oct

‘05 From Woodmizer When You Buy Your Circular Saws B.H. Payne Austin Woods You’ve Bought the best... We Guarantee It! LT300 (888) 401-6367 ext. 703

been converted to electricity over

WOLVERINE

Cat 3406 140KW Genset, 12,400 Cambridge, Ohio 511EX hydraulic. Comes with a operators www.ohioforest.org BUT ONLY THE hours ready to run. Item ID 13434.

Item ID: 13799 cab, electric boxes, conveyor and Sam x702

BY Sam MENOMINEE SAW Contact: kickersGUARANTEES and will peel a 3” post to a

** INFO LINK**

Item ID: 14031 Traditional Quality MAILING ADDRESS Contact: Combined Austin B & B Mfg . ...............................

P.O. Box 1916 With Todays Technology Ph: (888) 401-6367 x703 18

Columbia, Quality Brand TN 38402-1916 Reg. U.S. Pat Off (888) 401-6367

feed deck 20 foot out feed deck

MID-ATLANTIC Item LOGGING ID: 13911 & BIOMASS Fri, 15 Sept - Sat, 16 Sept Contact: Austin

MARKETING DIRECTOR

austin@lumbermens.co

has been rebuilt, it has a 24foot in

Escanaba, Michigan

PUBLISHER

EQUIPMENT REPS Item ID: 13862 Sam Wall Contact: Samext. 702 (888) 401-6367 sam@lumbermens.co Ph: (888) 401-6367 x702

10 hours on this machine since it

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

‘98 752-0627 611 Ex-Hydro ‘10 Shop Call 800 Circular SawsBuilt Baker ......................................

Make Sure To Ask ForAx Our Free, Complete Saw Catalog 5, 7 ADandSUBMISSIONS Saw Bits Shanks Wood Processor Circular Knives May be sentWe to­ Manufacture & SellBell's InsertedMachining Tooth Headsaws, Solid Tooth 27 .....................

B. H. Payne .............................. 16

Saws morris@lumbermens.co ItemSaws ID:&13948 ItemCarbide ID:Tipped 13916 Carbide Saws. We also Carbide Strobe ® Saws Saws, Inserted Tooth Cutoff Brute Force Mfg. ..................... 31 Contact: Contact: Austin B.H. PaynePOSTMASTER & Company Stock & Sell Bits & Shanks, CarbideAustin Tips, Diamond Wheels, John Deere 548G2 Ph: 401-6367 x703 Saw Manufacturers Buck Equipment (AIM) ........ 36 address changes to: Wheels, Ph: Send (888) 401-6367 x703 Knife Grinding Saw(888) Gumming Wheels & Knives.

Item ID: 14042 Lumberman's Exchange Mfg .............................. 32 Here’s What Get With Every B.H.Corley Payne Saw P.O. You Box 1916 Contact: Austin Columbia, TN from 38402 CRD Metalworks .................... 25 Ph: (888)good 401-6367 x703the Highest • Saws Quality Nickel ‘14 B66TD Skidder - manufactured Very runningonly ID 13438.

Sam x702Alloy Steel.

• Each Saw Milled with State-Of-The-Art Precision CNC Milling Machine.

Rotochopper

The Lumberman's Exchange is CWTimberPro Mill-ArmorHog .............. 17 condition.

Big Capacity Grapple!

2007 810 Combi • We Tension Your Saw toinYour RPM Speed BEFORE Leaving Our Factory. published monthly by Woods - 3410 hours. $32,000 recent CW Mill-Hogzilla ................... 15 9400 hours.

Tires at 40%.

Totally Guaranteed.

Machine Publishing, P.O. Box • Your Satisfaction -1916, Completely Item- Forwarder ID: 13838set up but upgrades repairs.

Fecon Columbia, TN and 38402.

All rights gone through

by TP Dealer who comes with rebuilt Log Max 750 35 Dyna Products ........................

Contact: Sam reserved.

AllMulching editorial/Head. advertorial BH250 Item ID submissions are used at the (888) 401-6367 didB.H. the following: RepackedInc. and processing head. Less Ext. than 603 5200 8 Empire Hydraulics ...................

Payne &publisher Company, 13502.

Sam discretion of the x702 and may resealed hydraulic cylinders – total hours.

Runs very well.

Has 34 Boxfor 90608 beP.O. edited purposes Great Lakes Mfg. ....................

2011 Tigercat 620Dof- clarity This is a and Although allReplaced efforts have Eastspace.

Point, GA 30364 grapple arch, steering; blade and plumbed for a clam hour skidderaccuracy with only Item Machinery ID 13408. Sam x702 Hahn ......................

3 beenlow made to ensure of 5500 404 761-8711 hydraulic hoses and where bunk. New swing gear box. Quick content submitted bylines advertisers hours on a cummins engine and 2014 Tigercat 630D Grapple Hurst Boiler ............................. 14 Fax 404 and writers, the Lumberman's needed – fill761-5398 pump, grapple, etc; attach in 15 min. to switch head to a fire suppression Comes Iron Skidder - Dual Arch Grapple. Just Exchange, its principlessystem. and Bull ...................................

21 associates,hydraulic are not held liable for Repacked fill pump; grapple.

Cummins 6.7 QSB engine. mounted on 35.5 tires at 50% back 1990 hours. 3 year/5000 hour PT

“Since 1890” Reproduction, errors or omissions.

Kilgore Saw .............................

22 Replaced exhaust; Optional on all in whole or part, is Replaced prohibited with­ on 260HP. and 40% front and good center chains warranty.

35.5Tracks tires with dualing Lignomat .................................

24 out written consent.and painted pins; Straightened adds $10,000.

IDWinch.

13501. all 4 tires.

Has the bigger 630 axles bogies rings at www.paynesaws.com 60%.

WideItem blade.

E-mail: info@paynesaws.com Web Site: ©2017 Woods Publishing

CARRIAGES & DRIVES post. Comes with a barko loader • Cutting Edge Plasma 7” Welds 2010 Cardinal HD Carriage a truck that has also • The Industry’s Highestmounted Band on Saw Capacity Carriages (Sawmill) - Cardinal Runs great. Has worked double been converted to electric power.

Carriage line Inventory it includes carriage • Quick Delivery from our HUGE M&F ............................. shifts Gauge so it has higher hours 28 Item ID 13926.log Sam x702 carriage with onboard turners, • Fast Sharpening & Exchange Program 14’ Snow Pusher Meadows Mill, . ................ at 13,500, but hasInc been well 33 SAWMILL drive, PORTABLE hyd pac for carriage, Item ID: JW-492406 to Keep YOU Running maintained.

New U/CDL200 last year.

36” Portable - Maximum Menominee Saw .....................

29 ‘11 Doosan sawyers cab,JSawmill computer Contact: Williamscontrols, 24” grousers.

All pumps rebuilt last diameter log36” Maximum • ID: Competitive Pricing Item JW-113876 cabinet with401-6367 electronic drives for Metal Detector's Inc. ..............

30 Ph: (888) x701length Ph: (888) 401-6367 x702

Contact: J Williams year.

Gull wing engine cover with

of cut-20’6” Powered by a Koehler carriage knees, husk including

Midwest Sharpening.............. 26

And ONLY Menominee Gives You Everything Ph: (888) x701 hydraulic lift401-6367 for easy maintenance.

Diesel 9.8HP Blade-1-1/4” 13’2” 48" bottom saw and 36" topby saw

Morbark .....................................

You need in a 9Wide

Band Saw – Plus long 12 Volt saw-head precision the Industry’s Most computer measures well. Owner up/down. Item ID 13897. Austin Piper's Saw Shop....................

13 Knowledgeable Staff. retiring. Bought new for $540,000!. x703 Rolly II in good condition and

Multitek ...................................

Expert Service 12 from

Rotochopper ............................

40 Item ID 13362.

Sam x702

STACKING RAC ‘04 Fabtek 344B

36” Portable Sawmill - Maximum Band Problem?

Got a Wide diameter Call Menominee Saw Todaylog-36” and Maximum You’ll length Harvester/Forwarder - JustMore 5700 of cut-20’6”

by Koehler Sawmill Exchange 11 Mills Learn..................

Why Trust Powered the Pro!

Row ............................

2006 Electric TimberPro 830 COMBI 20

hours.Sawmill Very good condition. Comes Select .........................

19

gas 19HP Blade 1-1/4” by 13’2”

Item ID: JW-093430 ‘05 Transport long 12 Volt saw-head Contact: J Williamsprecision TOLL FREE x701 Trailers Custom Ph: (888) 401-6367 and Log Max 7000 processing head up/down 12 Volt Electrical The Paul Bunyan Show ......... 39 Log Pup2 sets of tracks for 1-800-582-0470 for harvesting.

Forward/Reverse Saw Head with grapple for loading forwarder Smith Sawmill ...........................

4 Thomas Industrial Controls..... 10

Item Set ID:up JW-538174 Processor - This is a Chomper bogies. for quick change Travel.

Item ID 49858 13899.

Austin x703 900 16th St., Menominee, MI

Union GroveJ Saw & Knife.. 2, 37 Contact: Williams

super with a- 60hp In from harvesterTel: to grapple.

One Dixon Sawmill VERYengine.

UNIQUE 906-863-2609 Fax: 14, 906-863-1147 Ph: (888) 401-6367 x701 very nice shape. Only 171Dixon hours, AND EFFECTIVE MILL! Email: info@menomineesaw.com

Universal Refiner man operation.

Log...................

Max head 23 has

comes with green conveyer.

52 in bottom bladechain and 38 in top WWW.MENOMINEESAW.COM 800.S48.6914 I S73.663.7711 All of the manuals for the engine,

WoodMizer top saw and................................ runs well. Comparel to

Waratah 624 Super - New Item ID new machine at $650,000. panels; allCenter fluids pins and are tightSamItem x702ID 13526. Sam x702 andChanged no winch.

Computer (Logrite).

- USED FORESTRY EQUIPMENT FOR 2010 SALE ❘ Tigercat  SELL EQUIPMENT TODAY ❘ head grapple 24/7 SUPPORT SALE l§ TODAY 0 SUPPORT 13439.

Samfor x702 filters; Re-insulated cab; Checked TimberPro 725B w/Rolly II and extra fuel tank.

Item ID 13929.

2015 234BYOUR Loader - Model roatation on the w/ a 10500 hours.

New main pump and fixed wiring as needed. Item Processor - Super PLANERS Sam x702 234B. Only 300Clean hours Machine. on this 30’ reach on the boom. Joystick and auxiliary pump. New rebuilt

www.BakerProducts.net

blade. It has a four blade vertical

and chopper itself with comeNO. ❘ edger  the (888) 401-MENS 15 L! 401-MENS diesel powered awith fuel 2006 Tigercat 630C Grapple it, as well as all of the electrical efficient motor. Item Skidderduezt - Very247hp good running schematics. Item ID 13894. Austin

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

Kenworth T-800 Item ID: 87370

2003 Kenworth T-800, Complete overhaul, very well maintained, Cat C-15, 18 SPD. Chalmer Suspension, 246” WB, 40k Rears 2SPD. Cascade Trailer, Electric Scales, 8’6” Bunks Contact: DEMI Email: Demi@lumbermensco.com Phone: (385) 335-4225

‘13 Cat KMC 2500 Track D6M Dozer Skidder Item ID: 71062

Timber Harvester Item ID: 29211

13428 Victory Ln. // PO 124 JohnBox Deere 1270D Timber Harvester, 6 Wheel with Dangle Tracks on Front, John Deere Motor, 12000 hours, Adams Center, NY Head, 13606 well maintained Contact: DEMI Email: Demi@lumbermensco.com Phone: (385) 335-4225

B U Y S H O T

2005 John Deere 2054 Logger New pins and bushings in boom, new rod and packing in jib cylinder, new Front window, new injection pump, resealed main body,Sam tons of new capacity!.

Item IDvalve 13421. x702 hoses, new led lights, new pump coupler.

Contact: DEMI Email: Demi@lumbermensco.com Phone: (385) 335-4225

1994 Barko 160B - Electric Email: Demi@lumbermensco.com

well built processor. Item ID 13820.

motor, Rotobec continuous

Ph: (888) 401-6367 x703

Sam x702

Item ID: 48169

Only 1265 original hours on it. Comes with 24, 30 & 36” buckets.

‘05 Gehl CTL 70 Contact: AUSTIN

Email: Austin@lumbermensco.com Item ID: JW-986495 Phone: 888-401-6367 EXT 703 OR 931-797-8029

Contact: J Williams Ph: (888) 401-6367 x701

Firewood Processor - This is a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and

John Deere 648G3

Item ID: 58995 chain conveyer, 8 way splitter, on

Item ID: 14073 Two owner machine with 8300 original hours.

20,000lb goose neck trailer. Item ID Contact: Austin Contact: AUSTIN 13916. Austin x703 Ph: (888) 401-6367 x703Email: Austin@lumbermensco.com Phone: 888-401-6367 703 OR 931-797-8029 Best ValueEXT Portable Log Splitter

John Deere amp gauges.

Cuts logs650H up to 16”.

Item ID: 50512 One owner and comes with all Equipped with forestry package.

manuals and receipts. Purchased Contact: AUSTIN new for $32,500.

Item ID 13865.

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Sam x702

931-797-8029

LOGGING EQUIPMENT BANDIT

with 1700 hours, in very good

- Small manufacturer in PA has

quality chips with patented ‘Cone’ drum design. Can easily load 2012 42’

Handles to 32”. Uses Itemlogs ID:up 15324 13HP Honda motor. Manual start Deere G3 540 Log Skidder, well maintained,

1999 Bandit 1900 Tracked Disc

day. Item ID 13882. Austin x703

Contact: DEMI4-way wedge Has Log Lift. Uses

Diesel. 7500 Hours. One owner.

condition. Easily produces high

vans and produce 6 - 8 loads

made the best valued log splitter.

Log Skidder

John good condition, hours. per but7000 electronic

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

option is available.

Email: Demi@lumbermensco.com Phone: (385) 335-4225 adjustable to single two way.

Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Log Loader

homemade processor Item ID: 25974 with a 10’

FIREWOOD PROCESSORS log deck.

Hasw/ a Waratah hydraulic John Deere 2954C Log Loader 624Cgrapple, Processor

Head -2012 -9991 2010 Shop Built Wood Processor chainhours and-Excellent kicker Condition that all runs off

- It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 385

Contact: DEMI of a 4 cylinder Mercedes power Email: Demi@lumbermensco.com Phone: (385) 335-4225 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Item ID: 13920 John Deere Contact: Austin Logger Item ID: 82959x703 Ph: (888) 401-6367

Caterpillar 200114078 D6M XL Dozer Enclosed cab with Item ID: heat and A/C, new undercarriage, Low original hours, high track, comes with winch and rops, Contact: Austin Well maintained, everything is clean and tight.

off onto a conveyor. This is a very

John Deere 85D

‘83 John Deere 4850

‘95 John Deere C6 Tree Farmer

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Well maintained. Item ID 13294.

Sam x702

John Deere Backhoe 2004 Bandit Beast Model 4680 Item ID: 21361 3412 Caterpillar Diesel engine John Deere 410D5300 Backhoe, with 850 HP. hrs. 4WD, Mill Heavy in

Lift Option, 4&1 Bucket on front, 12” on back, 10ft.

Snow Pusher, 2900 hours, good condition.

Just finished 10

Acre clearing Contact: DEMIjob, ready to work!

Email: Demi@lumbermensco.com

Remote control.

Big production Phone: (385) 335-4225

 List  seLL  exchange  buy  save

BARKO

Contact: DEMI

Phone: (385) 335-4225

knuckleboom, 30' boom, 75hp grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in

Catworks 525C kohing 2011 head. head great.

Item ID: 26688 Item ID 13185. Sam x702

New rubber, and lots of recent upgrades.

1999 Barko 160D - new engine with Contact: AUSTIN approximately 1500 hours. Hour Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 meter dont work. The last 2 owners

931-797-8029 have only used it to load trucks or as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

09’ John BELL Deere 700J

Item ID: 48601 1990 Bell Super T - This Bell has Contact: AUSTIN aEmail: brandAustin@lumbermensco.com new Duetz engine. Lever Phone: 888-401-6367 EXT 703 control, 33” bar, pump and tranny

931-797-8029 ❘

 LumbermensCO.com

** CALENDAR** Cat 517

Item ID: 20725

2006 model with 6000 original hours, and enclosed cab.

Work ready.

NY STATE

WOODSMEN'S FIELD DAYS 18 August - Sun, 20 August

Fri, Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Boonville, New York www.starwebhosting.net/woodsmen/

Fri, 25 August - Sat, 26 August

Item ID: 46421

120 Springs, Prentice loader that is ready to be hooked Hot Arkansas on a truck. It came off a railroad and has very www.arkloggers.com low hours, Comes with PTO, Pump and grapple.

Has machine chromeknerld rolls. Big door that opens up for top and bottom arbor.

TEDGREAT LAKES Contact: AUSTIN 72NDContact: ANNUAL Email: Teds@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 701 has LOGGING & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 703 OR 931-797-8029

PUBLISHER

Woods Publishing

Item ID: 92211

MID-ATLANTIC LOGGING & BIOMASS Has Jocar computer setworks, has run around system, runs 8” or Fri, 15 Sept - Sat, 16 Sept 10” wide band. Could be used as Slab saw, horizontal saw, or run around resaw.

Contact: AUSTIN

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

Morris Woods Phone: 888-401-6367 EXT 703 OR 931-797-8029 (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR

Hydro Ax 611E John Williams Item ID: 58544 (888) 401-6367 ext. 701 j@lumbermens.co Contact: AUSTIN Donna Heninger

Escanaba, Michigan

Horizontal Band Mill

MID-ATLANTIC ADVERTISING SALESEmail: Austin@lumbermensco.com LOGGING & BIOMASS EXPO

DESIGN DIRECTOR

or (801) 319-9351

Thurs, 7 Sept - Sat, 9 Sept

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Lexington, Kentucky http://www.kfia.org/ Prentice 2190 KentuckyWoodExpo.aspx Item ID: 28889 Contact: AUSTIN

THE Email: PAULAustin@lumbermensco.com BUNYAN SHOW 888-401-6367 Fri,Phone: 6 Oct - Sun, 8 OctEXT 703

931-797-8029 Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

** INFO LINK**

Danckaert Item Band ID: Resaw - Roughly 1675 10 hours on this machine since it

‘96 Jeep C-5 Wrangler , 132K miles, 4 cylinder,

automatic has beentrans. rebuilt, it has a 24foot in

feed deck TED 20 foot out feed deck Contact: Email: Teds@lumbermensco.com

with 44 inch wheels, and Phone: 888-401-6367 EXT all 701the

or (801) 319-9351

bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute has CLT presses.

2016 also Barko 495 Item ID: 51788 Item ID 13876. Austin x703 original in excellent S2500 & W 125 Bandhours, Mill with condition.

Caterpillar generator - Low hours Contact: AUSTIN on the mill, electronic computer Set Email: Austin@lumbermensco.com Phone:1/2" 888-401-6367 works,1 or 2" band,EXT 22ft.703 track

931-797-8029 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 17

B U Y S

Since 1986, Lumbermens published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and Jocar industrial woodworking plants worldwide.

BANDMILLS & Wrangler HEADSAWS ‘96 Jeep C-5

H O T

The Tree that Started it All!

120 Prentice SOUTHWEST FOREST PRODUCTS EXPO Corley Double Arbor 8” Gang Item ID: 50009

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

Cat D4C LGP Forestry Dozer

“Precision Under Pressure”

Phone 315.284.4126Item ID: 99373 Fax 1993 Cat D4C LGP forestry dozer, good winch/strong winch, rails and pads 315.849.2045 are 40%. New rollers and idlers 130 hours ago. All fluids and filters where changedWebsite 130 hours ago. New batteries, alternator, fan belt, and starter all new. Clean straight machine, everything works as it should. Will walk on www.empirehyd.com water! Call for more pictures!

Email info@empirehyd.comContact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

Timberjack 430B Knuckle Boom Loader Item ID: 26771

2002 timberjack 430B, with bucksaw, approx 9k hours, enclosed cab heat/air, AC good. Great working machine Call for more pictures and video!

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

John Deere 548G2 Grapple Skidder

Item ID: 34791 ‘16 Halverson H140 John Deere 548G2 grapple(DEMO) skidder, excellent condiSkidsteer tion, regular maintenance, 28L’s, good strong winch,

tight centers, no leaks, excellent condition, Item ID:dry, JW-909632 straight, ready for the woods! Call for more pictures!

Contact: J Williams Contact: Ph: (888)MARK 401-6367 x701

Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

‘93 180B CatBarko 508 Cable Skidder

Item ID: 84481 Item ID: 14077 Contact: Austin Cat 508 cable skidder, 10,379 hours, great maintenance, 23.1’s 80% all around, good strong cat winch, Ph:centers, (888) x703 right just401-6367 pulled of job, work ready skidder!

Call for more pictures!

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

Blockbuster Firewood Tumbler Item ID: 52815

2018 Blockbuster firewood tumbler skidsteer attachment, like new! Call for more pictures!

B U Y S

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

Vermeer SC372 Stump Grinder Item ID: 15150

2016 Vermeer SC372 stump grinder, 85 hours, like new condition, diesel 13428 Victory Ln. // PO Boxfits124 engine, through residential gates, comes with extra sets of teeth.

Landscaper was going to get into stump grinding but too busy. Call for more Adams Center, NY 13606 pictures!

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

Franklin Q80 Grapple Skidder

H O T

Item ID: 55955

2003 Franklin Q80 grapple skidder with winch, approx 13k hours, tight pins and bushings all around, dual arch, new 5.9 Cummins approx 20 hours ago, used very lightly the last 4 years, used for hauling utility poles the majority of its life. Excellent machine Call for more pictures!

‘05 Gehl CTL 70 Contact: MARK

Email: Mark@lumbermensco.com Item ID: JW-986495 Phone: 888-401-6367 EXT 708 or 702-875-2703

Contact: J Williams Ph: (888) 401-6367 x701

‘83 John Deere 4850

Cat D5H TSK Grapple Dozer w/Winch Item ID: 86492

chain conveyer, 8 way splitter, on pump, blade cylinder seap recently fixed, grapple, winch, 80Item ID: 14073 90% undercarriage, tight,goose dry. 2nd ownertrailer. machine,Item excellent 20,000lb neck ID Contact: Austin condition! Call for more pictures!

13916. Contact: Austin x703 Ph: (888) 401-6367 x703 MARK 1999 enclosed cab heat/air, just over 2200 hours, new water

with 1700 hours, in very good

condition. Easily produces high

Email: Mark@lumbermensco.com Best888-401-6367 Value Portable Splitter Phone: EXT 708 orLog 702-875-2703

the best valued log splitter.

KMCmade 2400 Grapple/winch

quality chips with patented ‘Cone’ drum design. Can easily load 2015 42’ vans and produce 6 - 8 loads

- Small manufacturer in PA has

Handles to 32”. Uses Itemlogs ID:up 83802 13HP Honda motor. Manual start 2400 single arch grapple with winch 950 hr.

KMC Undercarriage 75%.

Strong tightoption and sound. per but electronic is available.

Contact: TED day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge

EDGERS & GANGS

Email: Teds@lumbermensco.com Phone: 888-401-6367 or (801) adjustableEXT to 701 single two319-9351 way. Great

Brewco Saws - Two Brewco Saws

Value! PA. Item ID 12062. Sam x702

in excellent condition. Runs great.1999 Firewood Processor - This is a International 9100 Item ID: 33563 Item ID 13644. Sam x702 homemade processor with a 10’

1999 International 9100.Has C-10 a motor.

8000 Serco loader FIREWOOD PROCESSORS log deck. hydraulic grapple,

2010 Shop Built Wood

continuous rotate. Like new tires. 720,000 miles. Dual fuel Processor chain andTruck kicker that runs off tanks, fairly new clutch. overall is inall good shape

- It has a 353 Detroit diesel, 40Contact: TED of a 4 cylinder Mercedes power Email: Teds@lumbermensco.com

inch insert tooth circle saw, 30Phone: foot 888-401-6367 unit. Has EXT a 4’701 chain saw319-9351 that kicks or (801)  Issue 364 385

Lumbermens™  since 1986

❘

‘95 John Deere C6 Tree Farmer John Deere 1710D

‘13 KMC 2500 Track Forwarder Item ID: 94242 Skidder

2003 John Deere 1710D 8 wheel forwarder, approx 16k hours,ID: tires 14078 approx 60%, comes with tracks on Item the back, great working machine! Call for more picContact: Austin tures!

Ph: (888) 401-6367 x703

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703 off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

lowTigercat hours. Control panel includes 610C Grapple

Skidder tach, oil pressure, water temp and Item ID: 44899 amp gauges. Cuts logs up to 16”.

2015 Tigercat 610E dual arch grapple skidder, apOne owner comes with all evprox 3500 hours,and 30.5 tires.

Excellent condition, erything works as it should. CAll for more pictures!

manuals and receipts. Purchased Contact: MARKItem ID 13865. new forMark@lumbermensco.com $32,500.

Email: Phone: Sam x702888-401-6367 EXT 708

702-875-2703

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 -

Paccair Winch

3412 Caterpillar Diesel engine Item ID: 86536 with 850 HP. 5300 hrs. Mill in

Paccair Winch = Model PA56-E10. Works great.

Item ID: 13920 Contact: John Austin Deere 650G Item ID: 30113x703 Ph: (888) 401-6367

1995 650G LGP, 6558 hours, 500 hours on new C frame, pins, and bushings, new arm rests, tracks and undercarriage approx 80% or better, regular maintenance, Item dry. CallID for more pictures! capacity!.

13421.

Sam x702

Contact: MARK BARKO Email: Mark@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 708

702-875-2703 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on always started JDinjection 548D pump.

Grapple Skidder Item ID: 8230 good. in good working order. 22in

1989 John Deere 548D grapple skidder, decent main line,

centers are good, new head winch drive shaft 6 months ago, new kohing head. works great. head gasket and injectors about a year ago, front drive shaft,

pinion, and joints new. 28L tires.x702 Selling because can’t haul Item IDu13185.

Sam it on a gooseneck trailer. Call for more pictures and a short video!

1999 Barko 160D - new engine with Contact: MARK approximately 1500 hours. Hour Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 meter dont work. The last 2 owners

702-875-2703 have only used it to load trucks or as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

‘84 Kenworth

Runs Great!.

Item 13740. Sam Item ID:ID 54167 x702

Log truck ‘84 Kenworth - 440 Bitcam Cummins, 15 speed overdrive, panel hitch, 24.5 tires. Also available, an additional trailer shown in picture.

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Phone: 888-401-6367 EXT 701

control, 33” and tranny

or bar, (801)pump 319-9351

Contact: TED

Acre job, ready to work!

Email:clearing Teds@lumbermensco.com Remote control. production

or (801)Big 319-9351

 List  seLL  exchange  buy  save

Contact: TED

aEmail: brandTeds@lumbermensco.com new Duetz engine. Lever Phone: 888-401-6367 EXT 701

❘

 LumbermensCO.com

Item ID: 51567

approx 2500 hours on rebuilt engine and reconditioned transmission, winch recently redone, all new o rings, clutch packs good, 6000 series winch big winch with oversized cable on it, 120 rate chokers, 23.1 tires 20-30%, comes with ice pick chains single diamond, 2 at 70% 2 at 80% or better, new hydraulic pump, all rebuilt axels, new differential pump, blade and steering cylinder recently repacked, great on cold start, no blow by strong motor strong transmission.

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

Fri, 25 August - Sat, 26 August

Item ID: 92115

2004 Valmet 860.1 Forwarder, 8 wheel, 18000 Hot Springs, Arkansas hours, well maintained, good condition. A set of 5/8” diamond back studded chains, www.arkloggers.com no tracks. All hydraulic pumps were rebuilt

2011 model with 7200 hours, has good rubber and is a one owner well maintained skidder.

Contact: AUSTIN 72NDContact: ANNUAL GREAT LAKES DEMI Email: Austin@lumbermensco.com Email: Demi@lumbermensco.com has LOGGING & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 703 OR 931-797-8029

PUBLISHER

Woods Publishing

Phone: (385) 335-4225

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

Timbco 425B Item ID: 74779

MID-ATLANTIC LOGGING & BIOMASS (‘93) new drive track pumps 1K hrs ago, motor was reman 3K hrs ago. 33” Timbco barsaw head. U/C 60%. only 10K frame hrs. Three Fri, 15 Sept - Sat, 16 Sept owners. One of cylinders on boom needs repacking. A/C - heat ok, windshield just replaced, 5.9L Cummins, leveling cab.

JOE MID-ATLANTIC ADVERTISING SALESContact: LOGGING & BIOMASS EXPO Email: Joe@lumbermensco.com

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

Phone: 888-401-6367 EXT 709 OR 801-362-2170 Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Timbco EXL KENTUCKY WOOD445 EXPO Fri, 15 Sept Item - Sat,ID:1687930 Sept

59687 DanckaertItem BandID: Resaw - Roughly 1996 Peterbilt 378 machine complete overhaul, 10 hours on this since it

in excellent condition, well maintained. Cat 3406 E, 15 SPD, Air trac Suspension, 246” WB, 40K Rears, has been rebuilt, it has a 24foot in Peerless Trailer, Electric Scales, 8’ 6” Bunks

feed deck 20 foot out feed deck Contact: DEMI

with inch wheels, and all the Email:44Demi@lumbermensco.com Phone: (385) 335-4225

bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130

2012 Tigercat 610C

feet a minute also CLT presses.

Item ID:has 98059 LUMBERMEN’S Equipment Digest BARKO 495ML MARKETING DIRECTOR Item ID 13876.

Austin x703 Lexington, (‘09) (9.5K hrs) U/CKentucky at 80%. Head is the 40 degrees 33” 7870 hours, 1 hour on out of frame reman on the Item ID: 33905 PO Box 1146 Timbco barsaw head. Cummins 8.3L engine. Needs John Williams entire engine, hydrostats in great condition, dry mahttp://www.kfia.org/ Schine, & Wtight 125 Band Mill with nothing!

Columbia, TN 38402-1146 centers, tight blade, tight grapple.

Excel(‘16) (4.2K hrs) Cummins engine, one gear box replaced at 3.5K hrs (888) 401-6367 ext. 701 Equipment and a recall on oil cooler. A/C - heat works, Big John hydraulic trailer, KentuckyWoodExpo.aspx lent(931) woods ready machine. Call for more pictures!

1-800-477-7606 Fax 388-3564 Caterpillar generator Low hours j@lumbermens.co fully plated. Excellent conditions, turn-on ready!

Digest Contact: JOE www.lumbermenonline.com Contact: on the mill,MARK electronic computer Set Email: Joe@lumbermensco.com Contact: JOE DESIGN DIRECTOR THE PAUL BUNYAN SHOW Email: Mark@lumbermensco.com Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 Donna Heninger Phone: 888-401-6367 EXT 709 OR 801-362-2170 Phone: 888-401-6367 works,1 1/2" or 2" band,EXT 22ft.708 track Fri, 6 Oct 801-362-2170 - Sun, 8 Oct

702-875-2703 Cat 3406 140KW Genset, 12,400 Cambridge, Ohio EQUIPMENT REPS

LUMBERMEN’S

www.ohioforest.org

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

PROTECT ALL ** Them INFO LINK** ® With Pro-Tec-To Wrap

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

Hydraulic Lines – Fuel Hoses – Air Lines Bell's Machining ..................... 27 Metal Detector's Inc. .............. 30 Electric Wire Bundles – Control Cables Brute Force Mfg. ..................... 31 Midwest Sharpening.............. 26

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Mfg&..............................

32® SLEEVE Multitek ................................... 12 PRO-TEC-TO®Corley WRAP PRO-TEC-TO Piper's Saw Shop.................... 13 CRD Metalworks ....................

25 COSTS! CUT YOUR DOWNTIME AND YOUR

The Lumberman's Exchange is Against CW ............................ 40 Mill-ArmorHog ..............

17 Rotochopper Protection Pinching, Crushing, Rubbing & Abrasion published monthly by Woods EVEN are Impervious to Oils CW Mill-Hogzilla ...................

15 and RowSolvents.

Electric ............................ 20 Publishing, P.O.–Box 1916, UV RAYS! Both Columbia, TN 38402. All rights Dyna Products ........................ 35 Sawmill Exchange .................. 11 reserved. All editorial/ advertorial Provides Maximum Protection for Logging, For The Distributor submissions are used at the Empire Hydraulics ................... 8 Select Sawmill ......................... 19 Construction & Stationary Applications Like: discretion of the publisher and may Nearest You, Call be edited for purposes of clarity Great Lakes Mfg. .................... 34 Smith Sawmill ........................... 4 • Debarker Buggies • Pantograph Arms • Forklift Masts and space.

Although all efforts have • Wheel Loaders • Skidder • Knuckleboom Hahn MachineryLoaders ...................... 3 The Paul BunyanorShow been made to ensure accuracy of Grapples Visit......... 39 Fellerbuncher Heads • Harvesting Heads • Stroke content •submitted by advertisers www.pro-tec-toproducts.com Hurst Boiler ............................. 14 Thomas Industrial Controls..... 10 and writers, the Lumberman's Delimbers • Dozer Blades Exchange, its principles and Iron Bull ...................................

21 Union Grove Saw & Knife.. 2, 37 ® Anywhere Hoses associates, are not held liable & forWires Are – Pro-Tec-To Products OEM’s, Repair Facilities & errors orOffers omissions.

Reproduction, Maximum Protection, Lower Reduced KilgoreCosts, Saw .............................

22 Distributor UniversalInquires Refiner ................... 23 Welcome in wholeDowntime or part, is prohibited with­ and Less Spills!

Lignomat ................................. 24 WoodMizer ................................ l out written consent. ©2017 Woods Publishing

hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including 48" bottom saw and 36" top saw

STACKING RAC

800-355-1250

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 19

L O G G I N G

Since 1986, Lumbermens published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Peterbilt 378 BANDMILLS & HEADSAWS

B U Y S

The Tree that Started it All!

ValmetPRODUCTS Forwarder EXPO John Deere 540G3 SOUTHWEST FOREST Item ID: 42041

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

H O T

** CALENDAR**

John Deere 640G3 Cable Skidder

Tigercat 630 C Dual Arch

Quadco 22B Hot Saw Head

“Precision Under Pressure”

Phone 315.284.4126 Item ID: 7750 Fax 315.849.2045 2012 model with very low hours, has only been used toWebsite cut softwood. www.empirehyd.com Email Contact: AUSTIN info@empirehyd.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Item ID: 10836

2004 Tigercat 630 C Dual arch w/winch.13,xxx hours. Rear tires are 80% Front 40% Hours will continue to go up as it is on the job and working as weather permits. Call for videos Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

‘93 Barko 180B

Tracked Feller Buncher ‘16 Halverson H140CAT 522B Item ID: 14077 Item ID: 31272 Contact: Austin Skidsteer (DEMO)

VALMET 840.2 FORWARDER Item ID: 9770

401-6367 x703 2016 Cat 522BPh: 1437 (888) hours, 2900 intermittent head, cold weather Item ID: JW-909632 starting package, 28” tracks, self leveling cab, fire suppression system, tracks undercarriage approx 90% Call for more info Contact: J Williams Ph: (888) 401-6367 x701 Contact: MARK

2005 model with 18000 frame hours, has new trunnion, & new rear bogie brakes installed last spring. Comes with 1 set of bear paws,1 set of ice chains, & 1 set of tracks.

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

Cat D5G with Winch Item ID: 107

2002 model with 7000 hours. Has log arch & winch! Everything in the undercarriage was just replaced besides the rails and one front idler.

‘95 John Deere C6 Contact: AUSTIN Tree Farmer Email: Austin@lumbermensco.com Item ID: Phone: 888-401-6367 EXT 13920 703 OR 931-797-8029

L O G G I N G

Timberking 458 Forwarder Item ID: 171

2005 model with 17,750 frame hours. Had new engine 13428 Ln. 1000 // hours PO Box and new super grip Victory grapple installed ago.

Working daily

Tigercat T240B Item ID: 4266

124 2006 model with 10,500 hours, has all new hoses, along Adams Center, NY 13606 with all repacked cylinders. In excellent condition.

Contact: AUSTIN Contact: AUSTIN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703

931-797-8029

931-797-8029

‘13 KMC 2500 Track Skidder

Contact: Austin Ph: (888) 401-6367 John Deere 648E x703

Item ID: 14078 1995 pin & Contact: Austin woods Ph: (888) 401-6367 x703

model in excellent condition, every bushing are new. Has not been in the capacity!.

Item worth ID 13421.

Sam done! x702 since having $20k of work

off onto a conveyor. This is a very

John Deere 640E Cable Skidder Sam x702 Item ID: 59850

Firewood Processor - This is

Timberpro 735TL Item ID: 14279

‘83 John Deere 4850

2011 timber pro 735B 11800 hours, 20" quadco hotsaw, tracks/undercarriage 35% no leaks dry, no issues, everyday runner heat/air both work fire suppression system new goal drive new swing turner all hard stuff redone oil Item 14073 change everyID: 200 hours grease everyday

Contact: Austin Contact: MARK Ph: (888) 401-6367 x703 Email: Mark@lumbermensco.com

Phone: 888-401-6367 EXT 708

702-875-2703 with 1700 hours, in very good

1993 John Deere 640E 6256 original hours with a new transmission from John Deere less thanModel 1000 hours with paperwork, a Chomper 16ago PDA solid machine, right, dry, ready to work. Call for more pictures!

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

1999 John Deere 648G

Item ID 13644.

ItemSam ID: x702 8548

FIREWOOD PROCESSORS 11000 frame hours with new engine installed last year.

Has New turbo as well.

2010 Shop Built Wood Processor AUSTIN - Contact: It has a 353 Detroit diesel, 40 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT30703 inch insert tooth circle saw, foot

931-797-8029  Issue 364 385

automatice firewood processor

Contact: MARK

Item ID: JW-986495 Email: Mark@lumbermensco.com with John Deere power unit with Phone: 888-401-6367 EXT 708 or 702-875-2703 Contact: J Williams low hours. Control panel includes Ph: (888) 401-6367 x701 tach, oil pressure, water temp and

2000 Tigercat 845

amp Item gauges. logs up to 16”.

ID:Cuts 4497

chain conveyer, 8 way splitter,This oncutter has One owner comes all saw 4689 originaland frame hours, with with New pump installed 300 hours ago. Good Uncercarraige. Cab

20,000lb goose neck trailer. Item manuals and receipts. Purchased has ID AC but no Heat.

13916. Austin x703

Best Value Portable Log

new for $32,500. Item ID 13865.

Contact: AUSTIN Email: Austin@lumbermensco.com Splitter Sam x702 Phone: 888-401-6367 EXT 703 OR 931-797-8029

- Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

LOGGING EQUIPMENT BANDIT540D 1988 John Deere

1999 Bandit 1900 Tracked Disc Item ID: 727

Rebuilt motor 1000 hours ago, Under tight center section, noatslip 13HP Honda motor. Manual start Chipper - Cat Carriage

but electronic option is

transmission, good winch. Tires are 23.1 x 26 with chains available. all around. 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Has Log Lift. Uses 4-way wedge Contact: AUSTIN adjustable to single two way.

Email: Austin@lumbermensco.com Great Well maintained. Item ID 13294.

Phone: 888-401-6367 EXT 703 OR 931-797-8029

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Sam x702

2004 Bandit Beast Model 4680 -

2008 Barko 495 ML

3412 Caterpillar Diesel engine Item ID: 7648 with 850 HP. 5300 hrs. in log deck. Has a hydraulic grapple, 11000 frame hours, and comes with csi Mill 264 Delimber. homemade processor with a 10’ chain and kicker that all

it is a tight and dry machine. runs Owner off statesgood condition.

Just finished

10

Contact: AUSTIN Acre clearing job, ready to work! of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that

Lumbermens™  since 1986

❘

BARKO

Contact: AUSTIN Email: Austin@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 703 OR 931-797-8029

well built processor. Item ID 13820.

‘05 Gehl CTL 70

Item ID: 6603

Email: Austin@lumbermensco.com Remote control.

Big931-797-8029 production kicks Phone: 888-401-6367 EXT 703 OR

 List  seLL  exchange  buy  save

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order.

22in 1991 Timberjack 450B Item ID:works 1826 great. kohing head. head

New ID pins13185. & bushings.

Tight skidder all Item Sam x702 around. Ready to drag some wood.

1999 Barko 160D - new engine with Contact: AUSTIN approximately 1500 hours. Hour Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 meter dont work. The last 2 owners

931-797-8029 have only used it to load trucks or as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS grapple.

Johncontinuous Deere 473C

Log Loader Runs Great!.

Item ID 13740. Sam Item ID: 66504 x702 BELL

2007 437C Log Loader. 19K hours. Upgraded hydraulic pump (D model). Needs bladder in accumulator.

1990 Bell Super T - This Bell has

TEDDuetz engine. Lever aContact: brand new Email: Teds@lumbermensco.com

Phone: 888-401-6367 701 control, 33” bar, pumpEXT and tranny

or (801) 319-9351

❘

 LumbermensCO.com

** CALENDAR**

2001 John Deere 435 Item ID: 7100

Loader is very tight and dry. It also comes with CTR bucksaw.

NY STATE

Fri, Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

WOODSMEN'S FIELD DAYS 18 August - Sun, 20 August

Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

Tigercat 845 Item ID: 8139

SOUTHWEST FOREST PRODUCTS Prentice 180 EXPO Fri, 25 August -Item Sat,ID: 267822 August

Hot Springs, Arkansas 94’ model with joystick control and bucksaw hookups. www.arkloggers.com 10000 total hours.

1999 model with 8200 Hours, UC is about 80%, has 36” pads. All filters were just changed, and cylinders repacked.

AUSTIN Contact: AUSTIN 72ND Contact: ANNUAL GREAT LAKES Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com has Phone: 888-401-6367 EXTEXPO 703 LOGGING & HEAVY EQUIPMENT Phone: 888-401-6367 EXT 703 OR 931-797-8029

Since 1986, Lumbermens published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

931-797-8029 Thurs, 7 Sept - Sat, 9 Sept

Escanaba, Michigan

John Deere 650J XLT

around 75%

Contact: AUSTIN

CATResaw 525C- Roughly Danckaert Band Item ID: 4091 10 hours on this machine since it

2011 Model with around 8000 Hours, well maintained

and ready to work. has been rebuilt, it has a 24foot in

feed deck 20 foot out feed deck Contact: AUSTIN Email: Austin@lumbermensco.com with 44 inch wheels, andEXT all the Phone: 888-401-6367 703 bells and 931-797-8029 whistles, its a production machine, with air strain conveyers

pressure Casting wheel has about 250 hours onguides. it and the Top excavator has 8,000.

It Selma, North Carolina has about 500 hours on new hydraulic pump. www.midatlantic-logging-biomass­ is supported on both sides. This Contact: TED expo.com/ is an extremely accurate machine

Morris Woods Phone: 888-401-6367 EXT 703 OR 931-797-8029 (888) 401-6367 ext. 704 morris@lumbermens.co

John Deere 200CLC

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky

Item ID: 706

John Williams http://www.kfia.org/ (888) 401-6367 ext. 7012004 Model with propac delimber, good UC. KentuckyWoodExpo.aspx j@lumbermens.co Machine has been well maintained.

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org

JD 540A (‘76)

Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

in ve1y good condition, Cuts 130

feet a minute CLT Morbark 30XL also has Item ID:presses.

13937 Item ID 13876. Austin x703

Great condition, very well kept, 900 HP V12 Cat engine, discs/wear plates replaced 1 year redone, and with valve bank has been S& W ago, 125spout Band Mill replaced, machine has been completely gone through and anything needing replaced has been, greased regularly, new radiator Call for Caterpillar generator - Low hours more pictures!

Item ID: 3526

** INFO LINK**

Tire size 23.1-26, Back tires 70% thread left, Front 15%, 2yrs owner, Motor completely rebuilt (700hrs), Transmission rebuilt (by John Deere 900hrs ago), Center section good, Breaks good, Turn on, ready to go to work, In KY Contact: JOE Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 OR 801-362-2170

P.O. Box 1916

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

Item 54265 (888) ID: 401-6367

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

BELL TRACKED (1993) Columbia, TN 38402-1916 Lever, Deutz engine, Has unit for A/C, but unsure of it AD SUBMISSIONS working or not, 2 years, Used for one job, U/C 65-70%, Burns no oil, InMay PA be sent to­

morris@lumbermens.co

Contact: JOE POSTMASTER Email: Joe@lumbermensco.com Send888-401-6367 address changes to: Phone: EXT 709 Lumberman's Exchange

801-362-2170 P.O. Box 1916 Columbia, TN 38402

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity JD 460 (1997) and space. Although all efforts have ID: 1095 been madeItem to ensure accuracy of content submitted advertisers New 5.9L Cummins engine, by Single arch, Deere winch, Comes chains, the 12K frame hrs, New hydraulic pump and with writers, Lumberman's (about 100hrs), New seals & and bushings, In NY Exchange, its cylinder principles associates, are not held liable for Contact: JOE errors or omissions.

Reproduction, Email: Joe@lumbermensco.com in whole or part, is prohibited with­ Phone: 888-401-6367 EXT 709 out written consent.

801-362-2170 ©2017 Woods Publishing

on the mill, electronic computer Set

Contact: MARK Email: Mark@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 708 or 702-875-2703

JD5, 640 (’80) Item ID: 93988 Saw .....................

29 Baker ......................................

7 Menominee

Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd Deere pac for carriage, John 650K XLT Item ID: 480 sawyers cab, computer controls,

2013 model with 4300 Hours, has forestry package, and

Detector's Inc.and ..............

30 & Bell's Machining .....................

27CenterMetal strong, section tight & strong, Turn-on GO, All fluids

Tires 23.1x26 , Thread left 30%, 6068T Powertex engine (’96), Brakes

cabinet with electronic recently had new tracks, sprockets,drives idlers, andfor rollers

Brute Force Mfg. ..................... 31

filters just changed, In OH

carriage knees, husk including Contact: AUSTIN 48" bottom saw and 36" top saw Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

Midwest Sharpening.............. 26

Contact: JOE Email: Joe@lumbermensco.com

Buck Equipment (AIM) ........

36 888-401-6367 Morbark .....................................

Phone: EXT 709 OR 801-362-2170 9 Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CAT 518 (’88) Item ID: 90569 CW Mill-ArmorHog .............. 17 Rotochopper............................ 40

Same owner 7yrs,Tire size 23.1x26, Back tires 90%, Front tires 40%, CAT 3304 engine, Center tight, Franklin 42 9 (bump winch), Good,

CW Mill-Hogzilla ...................

15 Electric ............................

20 strong motor,Row getting out of business, no crack sheet metal, straight pins, In OH

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Contact: JOE Email: Joe@lumbermensco.com

Empire Hydraulics ...................

8 888-401-6367 Select Sawmill Phone: EXT 709.........................

OR 801-362-217019 Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Paul540E Bunyan Show ......... 39 Hahn Machinery ......................John 3 The Deere Cable Skidder Item ID: 86762 Hurst Boiler ............................. 14 Thomas Industrial Controls..... 10 John Deere 540E with reman motor and 23.1’s Approx 16,000

Iron Bull ...................................

21hours.

Union Sawrunning & Knife .. 2,Call 37for frame Straight,Grove clean, strong machine. more pictures!

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Contact: MARK Email: Lignomat .................................

24 Mark@lumbermensco.com WoodMizer ................................ l Phone: 888-401-6367 EXT 708 or 702-875-2703

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

installed.

STACKING RAC Prentice 210E Item ID: 8256

Knuckleboom loader. Needs new batteries and also needs the small gear on the Rotobec head.

It has saw and delimber hookups, but no saw nor delimber. Ready to be shipped! Good machine, gets the job done, works as it should!

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 www.BakerProducts.net 800.S48.6914 801-362-2170 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 21

L O G G I N G

MARKETING DIRECTOR

Donna Heninger

BANDMILLS & HEADSAWS

Excavator w/Ryan DS 28 Felling Head that go up ID: and76226 down, with airbags, Item ID: 5109 Item MID-ATLANTIC LOGGING & BIOMASS it includes two setsaof Mcdonough 2009 model with forestry package, has 6000 frame hours, This is a 2006 320CL excavator with Ryan DS 28 felling with new John Deere installed engine 3 months ago. UC is Fri, 15 Sept - Sat, 16 Sept head on it. machine is tight with no leaks. The cutter head

MID-ATLANTIC ADVERTISING SALESEmail: Austin@lumbermensco.com LOGGING & BIOMASS EXPO

DESIGN DIRECTOR

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

07 Prentice 950B

“Precision Under Pressure”

Phone 315.284.4126 Item ID: 5368 Fax 315.849.2045 3000 Original hours and has a new set of 30.5 Website Goodyear tires. www.empirehyd.com Email Contact: AUSTIN info@empirehyd.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

648 G3 Grapple Skidder

John Deere 648H Grapple Skidder ‘16 Halverson H140 Item ID: 80285

Item ID: 76982

648G3 grapple skidder, 2007. Engine has 2k hrs on it and the transmission has 1k hrs. Tires 67X34X25. (about 20%).

Selling because he is getting out of the business.

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

2012 648H single arch with the bigger grapple 30.5 Skidsteer (DEMO) rubber at about 30 to 40% no leaks, cold ac, hot heat, rightID: centers 10,1xx hours working everyday Item JW-909632 hours will go up. Call for more pictures and video!

Contact: J Williams Contact: Ph: (888)MARK 401-6367 x701

Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

2006 trail king red river series own top trailer with walking floor. Excellent condition. Call for more pictures and video!

‘95 John Deere C6 Tree Farmer

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT Item 708 or 702-875-2703 ID: 13920

Contact: Austin ‘13 KMC 2500 Track 2011 Deere Ph:437D (888) John 401-6367 x703 Skidder Knuckle Boom Loader

L O G G I N G

01’ Timberjack 460D Item ID: 345

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Contact: AUSTIN Adams Center, NY 13606 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

2003 model just completely serviced, has newer 120” esco Grapple, reman motor, and new hydraulic pump. Skidder is dry and currently working daily.

‘05 Gehl CTL 70 Contact: AUSTIN

Email: Austin@lumbermensco.com Item ID: JW-986495 Phone: 888-401-6367 EXT 703 OR 931-797-8029

Contact: J Williams Ph: (888) 401-6367 x701 Item ID: 14236

chain 8 way 2014 John Deere 843K conveyer, 34x26 tires 70-80% runs assplitter, should lowon hour, Item ID: 14073 JD 22B head 20,000lb goose neck trailer.

Item ID Contact: Austin Contact: MARK 13916. Austin x703 Ph: (888) 401-6367 x703Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703 Best Value Portable Log Splitter

vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Timbco 445EXL w/ EDGERS & GANGS Timberpro Barsaw

Item ID: 26316 Brewco Saws - Two Brewco Saws

2004 Timbco 445EXL 7150 hours right now, it runs everyin excellent condition.

Runs great. day so that will change. Machine has a Timberpro TBS32 barsaw.ID The 13644. head was put on atx702 6600 hours, so it’s basiItem Sam cally new. Regular maintenance, undercarriage has one sprocket at about 30% one at 75% and the rest has recently been replaced. Tight machine Call for more pictures!

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor Contact: MARK -Email: It has aMark@lumbermensco.com 353 Detroit diesel, 40 Phone: 888-401-6367 EXT30708 inch insert tooth circle saw, foot

702-875-2703  Issue 364 385

well built processor. Item ID 13820.

motor, Rotobec continuous

Firewood Processor - This is

(excellent condition.). Item ID

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes

JD 337E (2016)

‘14 John Deere 843K

drum design. Can easily load 42’

2011 model portable loader, has 8,631 hours on it. capacity!. Item ID 13421. Sam x702 Woods ready.

Sam x702

Item ID: 5458

quality chips with patented ‘Cone’

Item ID: 52342

Contact: WALKER BARKO Email: Walker@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 707 knuckleboom, 30' boom, 75hp off onto a conveyor. This is a very

Franklin Q70

condition. Easily produces high

- Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

tach, oil pressure, water temp and Item ID: 34479 amp gauges. Cuts logs up to 16”.

CSI reversible 4400 (18’ saw), 1.8K hours, In WV

One owner and comes with all

manuals and receipts. Purchased Contact: JOE Email: new forJoe@lumbermensco.com $32,500. Item ID 13865.

Phone: Sam x702888-401-6367 EXT 709

801-362-2170

LOGGING EQUIPMENT BANDIT648L ‘15 John Deere

Item ID: 14237 1999 Bandit 1900 Tracked Disc

2015 John Deere 648L 44” tires 2267 hours 85-90% dry, tight, lowathour, 13HP Honda motor. Manual start Chipper - Cat Under Carriage runs as should ready to go, dual arch, good winch

but electronic option is available.

50% or better. 475 hp Cummins Contact: MARK Diesel. 7500 Hours. One owner.

Has Log Lift. Uses 4-way wedge Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703 adjustable to single two way. Great Well maintained.

Item ID 13294.

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

Sam x702

2004 Bandit Beast 595 Model 4680 ‘14 Barko Item ID: 14238 3412 Caterpillar Diesel engine

2014 Barko 595 ML Magnum+ CSI 5300 264 Delimber CSI 4400 with 850 HP. hrs. 18’ Mill in ground log deck. Has a hydraulic grapple,

chain and kicker that all runs

saw 1402 hours, plated lines, hyrdraulic legs, tight, dry, runs as should, ready to work,good on pits trailer, cat kodiak grapple off condition.

Just finished 10

Acre clearing job, ready to work! of a 4 cylinder Mercedes power Contact: MARK Email: Mark@lumbermensco.com control.

Bigorproduction unit. Has a 4’ chain saw that kicks Phone: Remote 888-401-6367 EXT 708 702-875-2703

Lumbermens™  since 1986

❘

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Item ID: 25361

Item ID: 4654

with 1700 hours, in very good

Item ID: 14077 '94 John Deere 548E Contact: Austin Item ID: 14185 Ph: (888) 401-6367 x703

Red River Series Trail King Open Top Trailer

96’ Hydro ax 611E

‘83 John Deere 4850

‘93 Barko 180B

 List  seLL  exchange  buy  save

grapple, 5,000 original hours.

13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. inJD good working order. 22in 550K (2015) kohing head. head Item ID: works 92495great.

Item ID x702 3.5K hrs, 18”13185. new tracksSam sprockets idlers, Winch, In WV

1999 Barko 160D - new engine with Contact: JOE approximately 1500 hours. Hour Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 meter dont work. The last 2 owners

801-362-2170 have only used it to load trucks or as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS Prenticecontinuous 2124 Loggrapple.

Loader Item ID:ID 64635 Runs Great!. Item 13740. Sam

Prentice 2124 loader mounted on truck, 3406 425 HP truck has 450000 miles, 8LL transmission, 40,000 LB rears, 20,000 LB front end, double framed. Call for more pictures!

B model x702

BELL

1990 Bell Super T - This Bell has Contact: MARK aEmail: brandMark@lumbermensco.com new Duetz engine. Lever Phone: 888-401-6367 EXTtranny 708 control, 33” bar, pump and

702-875-2703 ❘

 LumbermensCO.com

** CALENDAR**

CAT 555D Grapple Skidder

Prentice 180 FOR Item CLASSIFIEDS ID: 7822 Call 888.401.MENS 3226 hours, 35.5 tires approx 50-60%, everything is in excellent condi1994 Model with 10,000 hours, joystick tion, routine maintenance through cat, works great, pulling machine, control, 6 cylinder Cummins motor, tight turn See pictures, prices, selling only to buy a bogie skidder! Call for more pictures! NY STATE WOODSMEN'S FIELD DAYS table, and plumbed for a bucksaw.

Workand ready Fri, 18 August - Sun, 20 AugustContact: AUSTIN Location of all equipment at Contact: MARK Email: Mark@lumbermensco.com Boonville, New York Email: Austin@lumbermensco.com www.LumberMB\ISmagazine.com Phone: 888-401-6367 EXT 708 or 702-875-2703 Phone: 888-401-6367 EXT 703 OR 931-797-8029 Item ID: 8610

www.starwebhosting.net/woodsmen/

The Tree that Started it All!

BANDMILLS & HEADSAWS SOUTHWEST FOREST PRODUCTS EXPO 2009 John CAT 527 Grapple Dozer Deere 700J Dozer Danckaert Band Resaw - Roughly Fri, 25 August - Sat, 26 August

Item ID: 69600

2005 Cat 527, undercarriage 90-95%, repaired leaky fuel tank, rebuilt transmission/torque and final drive approx 1500 hours ago, strong motor, good working machine. Call for more pictures!

Hot Springs, Arkansas www.arkloggers.com

Item ID: 54715 10 hours on this machine since it

John Deere 700J dozer with winch, machine completely gone through in spring. Enclosed heatrebuilt, and air, excellent approxin 3500 has with been it hasmachine a 24foot hours. Excellent working machine! Call for more pictures!

feed deck 20 foot out feed deck

72ND ANNUAL GREAT LAKES Contact: MARK Contact: MARK Email: Mark@lumbermensco.com Email: Mark@lumbermensco.com with 44 inch wheels, and all the Since 1986, Lumbermens has LOGGING & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 708 or 702-875-2703 Phone: 888-401-6367 EXT 708 or 702-875-2703

published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and JD 648 G3 Grapple Skidder industrial woodworking plants worldwide.

PUBLISHER

Thurs, 7 Sept - Sat, 9 Sept

Item ID: 4572

it includes two14184 sets of Mcdonough Item ID:

pressure guides. Top Casting wheel Selma, North Carolina Contact: AUSTIN www.midatlantic-logging-biomass­ is supported on both sides. This Email: Austin@lumbermensco.com expo.com/ Phone: 888-401-6367 703 machine is an extremelyEXT accurate

Email: Teds@lumbermensco.com

Morris Woods Phone: 888-401-6367 EXT 701 or (801) 319-9351 (888) 401-6367 ext. 704 morris@lumbermens.co

John Deere 350D Excavator Item ID: 41687

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

feet a minute also has CLT presses.

Lexington, Kentucky

Item ID 13876.

Austin x703 '04 John Deere 700H

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

Contact:Caterpillar AUSTIN generator - Low hours Email: Austin@lumbermensco.com on the mill, electronic computer Set Phone: 888-401-6367 EXT 703 works,1 1/2" or 2" band, 22ft. track

John Williams http://www.kfia.org/ Approx 5882 hours, hydraulic thumb, enclosed cab heat /air good, (888) 401-6367 ext. 701 32” pads, approx 70% undercarriage, everything is in good working KentuckyWoodExpo.aspx j@lumbermens.co condition. Regular maintenance. Call for more pictures!

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

in ve1y good condition, Cuts 130

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

Item 14187 S&W 125 ID: Band Mill with

Cambridge, Ohio www.ohioforest.org Treefarmer C7T GM Grapple/Winch Skidder Item ID: 11726

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

** INFO LINK**

Item P.O. ID: Box89885 1916

Phone: 888-401-6367 701 or (801) 319-9351 B & B Mfg. ...............................

18 M&F EXT Gauge .............................

28

Prentice (’09) MAILING2432 ADDRESS Columbia, TN 38402-1916

-3.7K hrs, Tire size 30.5-32, Tires thread 80% front, 60% (888) back, Center section tight,401-6367 Dual arch, Winch works good, Grapple & steering cylinders repacked recently, Excellent service record, 3rd owner, he put 1.1K hrs on it, 2nd AD SUBMISSIONS owner put only 100hrs on it, then went out of business, May be sent to­ In IN

morris@lumbermens.co

Contact: JOE POSTMASTER Email: Joe@lumbermensco.com Send address changes to: Phone: 888-401-6367 EXT 709 Lumberman's Exchange

801-362-2170 P.O. Box 1916 Columbia, TN 38402

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited purposes(‘08) of clarity JDfor848H and space.Item Although all efforts have ID: 8810 been made to ensure accuracy of 14K frame hrs, 3yrs owner,by Owner put 2K hrs on it content submitted advertisers since purchase, Tires size 35.5, 40% thread, No winch, and writers, the Grapple no issue, No oil Lumberman's burn, no leaks, New windows Exchange, 300hrs ago, In TNits principles and associates, are not held liable for Contact: JOE errors or omissions.

Reproduction, in whole or part, is prohibited with­ Email: Joe@lumbermensco.com out written consent.

Phone: 888-401-6367 EXT 709

801-362-2170 ©2017 Woods Publishing

PRICE REDUCED - 305 Hours on out of frame rebuild on 4/53 Detroit, rebuild Clark 3 speed powershift transmission and rebuilt torque converter. All paper work available on rebuilds.

All new on piece hoses from grapple rotation motor and grapple cylinders and to cylinders on single arch back to the cab valve bank. New transmission hoses also from torque converter to transmission and to transmission cooler. All cylinders rebuilt with no leaks. Some play in craddle pin but over all machine is tight. Frame has No cracks and has never been welded on. 24.5 X 32 tires 20 ply on rear with 20 percent tread 10 ply on front with 5 percent tread.

Contact: TED

B. H. Payne .............................. 16

Email: Teds@lumbermensco.com

Meadows Mill, Inc. ................ 33

Franklin 155B Forwarder Baker ...................................... 5, 7 Menominee Saw ..................... 29

Item ID: 10700 Bell's Machining .....................

27 Metal Detector's Inc. .............. 30 1982 Franklin 155B Tree hauler/Forwarder. Ready to work. Perkins

inline 6 engine. Ideal for walnut. Can be hauled on a low-boy. 5019

Hours. more pictures.Sharpening.............. 26 Brute Force Mfg. .....................

31Call forMidwest

Contact: Buck Equipment (AIM) ........

36 TED Morbark ..................................... 9 Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls,

CAT 525B cabinet2004 with electronic drives for Item ID: 14204 carriage knees, husk including Contact: 48" bottomAUSTIN saw and 36" top saw Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

STACKING RAC

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill Cable...........................

Skidder 4

1994 Timberjack 240 B

1989, 5.9 Cummins engine.Controls The engine ..... was replace Thomas Industrial 10 with an almost new motor from a wrecked truck. The

cable Skidder. 7,225 hours on a rebuilt engine. Winch works good. Woods ready.

Hahn Machinery ...................... 3

Prentice 210 E

Hurst Boiler 14 Item.............................

ID: 98009

Timberjack 450 C

Item ID:Show 5077......... 39 The Paul Bunyan

Prentice E Series E loader. Well maintained and21 in Iron 210 Bull ................................... great condition.

transmission was rebuilt, also re-build axle. Estimate about 2500 hours onSaw the new Slight.. leak trans.

Union Grove &stuff.

Knife 2,in37 Fronts 45% with new bear claw chains, backs 80%.

Contact: TED Email: Teds@lumbermensco.com Lignomat ................................. 24 Phone: 888-401-6367 EXT 701

or (801) 319-9351

Email: Teds@lumbermensco.com WoodMizer ................................ l Phone: 888-401-6367 EXT 701

Kilgore Saw ............................. 22

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Universal Refiner ................... 23 Contact: TED

 SELL YOUR EQUIPMENT TODAY TODAY l§

or (801) 319-9351

❘

 24/7 SUPPORT 0 SUPPORT

Item ID:74044

Contact: WALKER Email: Walker@lumbermensco.com www.BakerProducts.net 800.S48.6914 I S73.663.7711 Phone: 888-401-6367 EXT 707 ❘ L!  (888) 401-MENS 401-MENS

NO. 23

L O G G I N G

MARKETING DIRECTOR

EQUIPMENT REPS

that go up and down, with airbags, '93 John Deere 548E

front and rear. Working. Almost everything on here has

MID-ATLANTIC ADVERTISING SALESContact: TEDLOGGING & BIOMASS EXPO

Donna Heninger

machine, with air strain conveyers

MID-ATLANTIC LOGGING & BIOMASS 648 G3 John Deere skidder 9700 hrs on frame new JD motor 400 hrs ago. Blade extensions 28l tires 75 to 80% Fri, 15 Sept - Sat, 16 Sept

Woods Publishing been recently replaced. Call for more info.

DESIGN DIRECTOR

bells and whistles, its a production

Escanaba, Michigan

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

'97 Hydro AX-411 EX Bar Saw Head

‘16 Halverson H140 Skidsteer (DEMO) 04’ TimberKing 540DS

Item ID: 98754

Heat works. Air needs charging.

Tires inc., great shape tires chains to go with it bear claws.

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

2011 CAT 525C

Item ID: JW-909632 Item ID: 14205 Contact: J Williams Contact: Ph: (888)AUSTIN 401-6367 x701

Item ID: 14203

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘93 Barko 180B

Item ID: 14077 Contact: Austin Prentice Ph: 98’ (888) 401-6367410E x703 Item ID: 14206

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

John Deere 444k Item ID: 9302

2009 model and is a one owner machine with 4900 original hours. Condition is like new. Ready to go to work.

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

Timbco 415 w/Fabtek Head

‘13 KMC 2500 Track Skidder

L O G G I N G

Item ID: 8837

‘89 Timberjack 380A

2001 timbco 415 fabtek 5head reabuilt head 5900 hours on rebuilt John Deere engine approx 22k frame 90% tracks and undercarriage. Ready to work. Call for 13428 Victory Ln. // PO Box more pictures!

Item ID:ID: 14078 Item 14039 Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703

124 Adams Center, NY 13606 Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Mid 90’s Husky Brute 335XL

ID:13421.

14088Sam x702 capacity!.Item Item ID

off onto a conveyor. This is a very

BARKO Contact: AUSTIN Email: Austin@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 703 knuckleboom, 30' boom, 75hp

Item ID: 99096 Sam x702

grapple, 5,000 original hours.

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

well T185 built processor.

Item ID 13820.

Rayco Hydra Stumper

‘05 Gehl CTL 70

‘95 John Deere C6 Tree Farmer

Firewood Processor - This 1998 Rayco T185 Hydra Stumper 185 hp JD engine w/lessisthan 50 hrs on total rebuild New cutter head pump, alternator & gauges. Rebuilt track drives &amain gearbox. Runs & works16 good.

Call for more picChomper Model PDA tures! automatice firewood processor

Contact: MARK Item ID: JW-986495 with John Deere power unit with Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703 Contact: J Williams low hours. Control panel includes Ph: (888) 401-6367 x701

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

Caterpillar

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 with 1700 hours, in very good

lbs, HP,and New Firestone chain conveyer, 8 way splitter,17,000 on One100 owner comes with all23 x 126, Power Shift New Hyd Pump, New 20,000lb goose neck trailer. Item ID Shaft, manuals receipts.

Purchased Winch Newand Hyd Park Brake.

13916. Austin x703 for $32,500. Item ID 13865.

Contact:new SAM Email: Sam@lumbermensco.com Best Value Portable Log Splitter Sam x702 Phone: 888-401-6367 EXT 702 - Small manufacturer in PA has LOGGING EQUIPMENT

on injection pump. always started Item ID: 2476 good. in good working order. 22in Product no. 4194, Cab with cold AC, kohing head. head works great.

SH56 Bunching Head, 28L-26 Tires At 60%, Center Tight, Runs Great, Item ID 13185. Sam x702 Machine Has New Injectors, New Fan Motors, 1999 Barko On 160D new engine And Clutch AC, -11,111 Hours. with approximately Contact: SAM1500 hours. Hour Email:dont Sam@lumbermensco.com meter work. The last 2 owners Phone: 888-401-6367 EXT 702 have only used it to load trucks or

quality chips with patented ‘Cone’

Handles logs up to 32”. Uses

delimber, grapple has been rebuilt.

‘83 John Deere 4850

‘00ID: Timberjack 1110 Item 14073 Item ID: 14033 Contact: Austin Ph: (888) 401-6367 x703 Contact: AUSTIN

condition. Easily produces high

drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

Johncondition.

Deere Runs 540B in excellent great.

Item ID: 0908 Item ID 13644. Sam x702 All FIREWOOD Refurbished!PROCESSORS 4K Original Hours!

2010 Shop Built Wood Processor SAM - Contact: It has a 353 Detroit diesel, 40 Email: Sam@lumbermensco.com inch insert tooth circle saw, 30 foot Phone: 888-401-6367 EXT 702  Issue 364 385

tach, oil Deere pressure, 540D water temp and John Item ID: 5613 amp gauges.

Cuts logs up to 16”.

made the best valued log splitter.

John

BANDIT Deere 437D Log Loader Item ID: 8834 1999 Bandit 1900 Tracked Disc

13HP Honda motor. Manual start - Cat Under Carriage Product Chipper No. 4204, Extra Clean, 10K at Hours, Stock Photo Delimber but electronic option is available.

50% or better. 475 hp Cummins Contact:Diesel.

SAM 7500 Hours. One owner.

Has Log Lift. Uses 4-way wedge Email: Sam@lumbermensco.com adjustable to single two way. Great Well maintained. Item ID 13294.

Phone: 888-401-6367 EXT 702 Value! PA. Item ID 12062. Sam x702 Sam x702 Firewood Processor - This is a

2004 Bandit Beast Model 4680 -

Treefarmer C5D Skidder

3412 Caterpillar Diesel engine Item ID: 17115 with 850 skidder.

HP. 5300 in hi/low log deck. Has a hydraulic grapple, 1970 Tree Farmer C5D cable Detroithrs.

353, 4Mill speed with homemade processor with a 10’ chain and kicker that all

and shuttle, carco winch , ring chains on front axle, good blade. Noisy, but runs pretty good. comes 2 good spare runs smokey, off some leaks good condition.

Justwith finished 10tires.

Acre clearing job, ready to work! of a 4 cylinder Mercedes power Contact: TED Email: Teds@lumbermensco.com Remote control.

Big production unit. Has a 4’ chain saw that kicks Phone: 888-401-6367 EXT 701 or (801) 319-9351

Lumbermens™  since 1986

❘

 List  seLL  exchange  buy  save

as a backup as needed. Has a CTR Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

96’ John BELL Deere 643D

Item ID: 14207 1990 Bell Super T - This Bell has Contact: AUSTIN a brand new Duetz engine. Lever Email: Austin@lumbermensco.com control, bar, pump and Phone:33” 888-401-6367 EXTtranny 703 ❘

 LumbermensCO.com

** CALENDAR**

TimberPro 725B FOR CLASSIFIEDS

Timbco 425D

Item ID: 20976

Item ID: 98053

Call 888.401.MENS

(‘12) (2.8K hrs) One owner. Cummins 8.3L, U/C at 40%. Everything in working order with a Quadco Seedisc pictures, and DAYS 2900 intermittent saw head. prices, Cream puff!

1995 model with good Undercarriage and 22” quadco hot saw. Around 10,000 hours.

NY STATE WOODSMEN'S FIELD 18 August - Sun, 20 AugustContact: JOE Location of all equipment at

Contact: AUSTIN Fri, Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Email: Joe@lumbermensco.com Boonville, New York www.LumberMB\ISmagazine.com Phone: 888-401-6367 EXT 709 OR 801-362-2170 www.starwebhosting.net/woodsmen/

The Tree that Started it All!

648 E Cable Skidder

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

Item ID: 87791

Hot Springs, Arkansas www.arkloggers.com

648E has new motor 360 hrs on it. 23.1 26 tires at 80 to 85% Almost everything on this has been replaced. Call for more info.

BANDMILLS & HEADSAWS

Timberjack 240D Danckaert Band Resaw - Roughly Item ID: 40272 10 hours on this machine since it

Skidder has a grapple and a winch, with 6 cylinder has In been rebuilt, it has a 24foot in Cummins motor. excellent condition.

feed deck 20 foot out feed deck AUSTIN 72ND ANNUAL GREAT LAKES Contact: Contact: TED Email: Austin@lumbermensco.com Email: Teds@lumbermensco.com with 44 inch wheels, and all the has LOGGING & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 703 OR 931-797-8029 Phone: 888-401-6367 EXT 701 or (801) 319-9351

Since 1986, Lumbermens published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

MID-ATLANTIC

ADVERTISING SALES

LOGGING & BIOMASS EXPO

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

bells and whistles, its a production

'13 John Deere 548G III

machine, with air strain conveyers

Item ID: 8789 MID-ATLANTIC LOGGING & BIOMASS 15 Sept - Sat, 16 Sept 5600Fri, Hours, 23.1 Tires.

that go up and down, with airbags,

Contact: SAM www.midatlantic-logging-biomass­ Email: Sam@lumbermensco.com expo.com/ Phone: 888-401-6367 EXT 702

KENTUCKY WOOD EXPO Fri, 15 Sept Sat, 16 Sept Prentice 384- Knuckleboom Lexington, Kentucky Loader Item ID: 36889 http://www.kfia.org/

2002 prentice 384 Knuckleboom, saw not included.

KentuckyWoodExpo.aspx Mounted on ’89 S 2500 International truck. Knuckleboom carrier/trailer is also available for $4,900.

(888) 401-6367 ext. 701 Item ID: 14208 j@lumbermens.co

Contact: AUSTIN DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 703

THE PAUL BUNYAN SHOW Contact: TED Email: Teds@lumbermensco.com Fri, 6 Oct EXT - Sun, Oct319-9351 Phone: 888-401-6367 701 or8(801) Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 JD 640D (’95) Columbia, TN 38402-1916 Item 51746 (888)ID: 401-6367 2yrs owner, AD tire size 30.5x32, tires are at 70%, Center SUBMISSIONS section tight, 8K hrs, engine re-built by previous owner, May be sent to­ In NY

Contact: JOE POSTMASTER Email: Joe@lumbermensco.com Send address changes to: Phone: 888-401-6367 EXT 709 Lumberman's Exchange

801-362-2170

JD 648H (’08)

Item ID: 6051 B & B Mfg . ...............................

18 -Tires size 30.5, 30% fron tires, back tires brand new, 16 enB. H. Payne .............................. gine fan is brand new (1.8K last year), all cylinders have been repacked, spent $4K on the A/C last year, brand Baker ...................................... new, Lil’ slack in the center section, not major,5, 12K7 frame hrs, 700hrs he put on it, 25hrs on engine when he first boughtMachining it, Transmission, 2yrs owner, IN MO Bell's .....................

27

Brute Force Contact: JOEMfg. ..................... 31 Email: Joe@lumbermensco.com Buck Equipment (AIM) Phone: 888-401-6367 EXT........

709 36 Corley 801-362-2170 Mfg .............................. 32

CRD611EX Metalworks ....................

Hydro-Ax Wheeled Feller 25 CW Mill-ArmorHog ..............

Buncher Item ID: 4041817

The Lumberman's Exchange is published monthly by Woods 1999 611EX quickCW steer,Mill-Hogzilla 28L’s 60-70% all pumps................... gone through and 15 rePublishing, P.O. Box 1916, built, approx 8000 hours, dry machine no leaks, heart/ air works, all Columbia, TN 38402. All rights new glass, tight excellent machine! Call for more pictures!

Dyna Products ........................ 35 reserved. All editorial/ advertorial submissions are used at the Contact: MARK Empire Hydraulics ................... 8 Email: Mark@lumbermensco.com discretion of the publisher and may Phone: 888-401-6367 EXT 708 or 702-875-2703 be edited for purposes of clarity Great Lakes Mfg. .................... 34 and space. Although all efforts have Hahn Machinery ...................... 3 been made to ensure accuracy of 843J Feller Buncher content submitted by advertisers Item ID: 99580 Hurst Boiler ............................. 14 and writers, the Lumberman's Exchange, its principles and 2007 843J Feller Bunche. 18K frame hours. Just got the Iron Bull ................................... 21 hydrostatic pump and the motor rebuilt. Selling because associates, are not held liable for he is getting out of the business. errors or omissions. Reproduction, Kilgore Saw ............................. 22 in whole or part, is prohibited with­ Contact: TED Lignomat ................................. 24 out written consent.

Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351 ©2017 Woods Publishing

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

M&F Gauge ............................. 28

648 G Inc Skidder Meadows Mill, . ................ 33 Item ID: 76963 Menominee Saw ..................... 29

1996 648 G cable skidder. Strong machine.

Engine new 3 years ago. Trans also gone Metal . .............. throughDetector's just prior to Inc engine.

28 X 32 30 tires.

Strong machine ready to work

Midwest Sharpening.............. 26 Contact: TED

Email: Teds@lumbermensco.com Mor bark ..................................... 9 Phone: 888-401-6367 EXT 701

or (801) 319-9351 Multitek ...................................

12

Piper's Saw Shop.................... 13 Rotochopper............................ 40 Row Electric ............................ 20 Sawmill Exchange .................. 11

it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine

Danzco Delimber inPT20H ve1y good condition, Cuts 130 Item ID: 14134 feet a minute also has CLT presses.

Excellent condition, motorx703 rebuilt about Item ID 13876.

Austin 300 hours ago less than 2700 original Shours & W 125 Band Mill with Caterpillar generator - Low hours Contact: MARK on the mill, electronic computer Set Email: Mark@lumbermensco.com Phone:1/2" 888-401-6367 works,1 or 2" band,EXT 22ft.708 track

702-875-2703 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage,

Barko 495B

sawyers cab, computer controls, Item ID: 44764

cabinet electronic drives forJohn 2016 modelwith with 3900 hours, csi delimber on big trailer fully plated. carriage knees, husk including Contact: 48" bottom AUSTIN saw and 36" top saw Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

STACKING RAC

Select Sawmill ......................... 19 SmithJohn Sawmill ...........................

Deere 640D 4 Item ID:63000 The Paul Bunyan Show ......... 39

Tigercat 604 Cable Skidder Item ID: 6552

cable Industrial Skidder. Controls Rebuilt ..... engine Thomas 10 and new hydraulic pump put in.

Union Grove Saw & Knife.. 2, 37 Woods ready.

approx. 7000 frame hours, brand new log arch, new fuel filter, new engine, new water pump, new pick up pump, new injector pump, 5-1000 hours on the new motor, very tight, very dry machine, Clark winch, stout winch 30% tires comes with set of chains at 80% Excellent machine Call for more pictures and video!

Universal ................... 23 Contact:Refiner WALKER Email: Walker@lumbermensco.com WoodMizer ................................ l Phone: 888-401-6367 EXT 707

Contact: MARK Email: Mark@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 708 I S73.663.7711 800.S48.6914 702-875-2703

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 25

L O G G I N G

MARKETING DIRECTOR International TD15 John Williams Bull Dozer

P.O. Box 1916 Columbia, TN 38402

Escanaba, Michigan

Selma, North Carolina

Woods Publishing

morris@lumbermens.co

Thurs, 7 Sept - Sat, 9 Sept

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

JD 643G

Item ID: 80565

Good cutting teeth are good one, Little hydraulic leak on cylinder, Dry machine, In MO Contact: JOE Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 OR 801-362-2170

‘16 Halverson H140 '96 CAT 515 Log Skidder

John Deere 753J

Item ID: 7534

Skidsteer (DEMO)

Item ID: 14258

REDUCED PRICE! Single Arch Glass Cab, 28L X 26 Item ID: JW-909632 Tires 50/40%, New Bear Paws On Front, Ice Chains Rear, Esco 84’ Grapple, New Cutting Edge On Blade, Contact: J Williams All Cylinders Just Rebuilt, 12,800 Hrs.

2013 John Deere 753J with Quadco 360 hotsaw head 3,215 hours. Everything runs and works as it should

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

Ph: (888) 401-6367 x701

Contact: SAM • Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: ‘80 (888) 401-6367 John Deerex703 550 Item ID: 14037

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

'07 John Deere 848H Grapple Skidder Item ID: 6566

Product No. 1876, 11,066 Frame Hours, New Engine At 8,800 Hours, Dual Arch Winch, Chains On All Four Tires, Working Daily In Woods.

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

L O G G I N G

‘13 KMC 2500 Track Skidder

‘14 B66TD Rotochopper

Item ID: ID: 14078 Item 13838 Contact: Austin Contact:Ph: SAM (888) 401-6367 x703

12’ JohnVictory Deere 437D 13428 Ln. // PO Box 124

Item ID: 14209 Adams Center, NY 13606 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

grapple, 5,000 original hours.

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 with 1700 hours, in very good condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws Franklin 2005 Q70 Item ID: 5579 in excellent condition. Runs great.

Item 13644.New SamRubber, x702 Heat/ LowID Hours!

ACFIREWOOD Takes No Oil. Great Running PROCESSORS Skidder.

2010 Shop Built Wood Processor

SAM - Contact: It has a 353 Detroit diesel, 40 Email: Sam@lumbermensco.com inch insert tooth circle saw, 30 foot Phone: 888-401-6367 EXT 702  Issue 364 385

Item ID: JW-986495 Contact: SAMwith • Email: JohnSam@lumbermensco.com Deere power unit with EXT 702 Contact: J Williams Phone: 888-401-6367 low hours. Control panel includes Ph: (888) 401-6367 x701 tach, oil pressure, water temp and

chain conveyer, 8 way splitter,It on has

Timberjack 1270C amp gauges. Cuts logs up to 16”.

a

Item ID: 8676 One owner and comes with all Timberjack 762C head with a Timberjack 3000

computer. It comes with an extra set of delimbing knives and 20,000lb goose neck trailer. Item ID manuals and receipts. Purchased book on the head.

13916. Austin x703

Best Value Portable Log

new for $32,500. Item ID 13865.

Contact: JOE Email: Joe@lumbermensco.com Splitter Sam x702EXT 709 OR 801-362-2170 Phone: 888-401-6367

LOGGING EQUIPMENT made the best valued log splitter.

JD 648G III (’03)BANDIT Item ID: 36067 - Small manufacturer in PA has Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc motor 6Khrs ago., 16K frame hours, Transmission

Reman gone through, New brakes, New pins & bushings (main arch lift), All 13HP Honda motor. Manual start Chipper - Cat Under Carriage cylinders repacked, Front and rear ends gone through, Tires at 24.5s, 80% thread front, 70% back tires, Motor has a little blow by and 1 door is missing., Owner since Jan ’18 and put 600 hrs on but electronic option is available.

50% orsince better.

475 hpOwner Cummins it...knows Most maintenance and fixing records avail., In WV

Has Log Lift. Uses 4-way wedge adjustable to single two way.

Diesel. 7500 Hours. One owner.

Contact: JOE Email: Joe@lumbermensco.com Great Well maintained.

Item ID 13294.

Phone: 888-401-6367 EXT 709 OR 801-362-2170

Value! PA. Item ID 12062. Sam x702

Sam x702

homemade processor with a 10’

3412 engine ‘97Caterpillar TimbcoDiesel 425D ID:5300 13950 with Item 850 HP. hrs. Mill in

Firewood Processor - This is a

log deck. Has a hydraulic grapple,

2004 Bandit Beast Model 4680 -

chain and kicker that all runs off condition. Just finished 10 Contact:good AUSTIN Email: Austin@lumbermensco.com Acre clearing job, ready to work! of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 Remote control. Big production unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

CurrentlyItem has ID 3316 hours. capacity!.

13421.

Sam x702

SamItem x702 ID: 7698

‘05 Gehl CTL 70

10’ John Deere 648H

Item ID: 14110

off onto a conveyor. This is a very

Firewood - This Product No. 1707, 3304 CATProcessor Engine 1-1/2 Yearsis Old, New Oil Cooler, Rebuilt Radiator, New Injector Pump, New a Chomper Model 16 PDA Hydraulic Pump, New Main Lines, New Arch, New Blade Plate, Good Air Brakes. automatice firewood processor

Item ID: 14073 Item ID: 14210 Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703

Item ID: 13920 Contact: Austin Ph: (888) x703 90’ CAT 401-6367 213 Excavator

BARKO Contact: AUSTIN Email: Austin@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 703 knuckleboom, 30' boom, 75hp

Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

well built processor.

Item ID 13820.

'94 CAT 518C Cable Skidder

‘83 John Deere 4850

‘95 John Deere C6 Tree Farmer

 List  seLL  exchange  buy  save

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item‘05 ID 13185.

Sam x702608B Timberjack Item 13898 1999 Barko 160DID: - new engine with

Contact: SAM1500 hours. Hour approximately Email: Sam@lumbermensco.com meter dont work. The last 2 owners Phone: 888-401-6367 EXT 702 have only used it to load trucks or as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

525Dgrapple.

CUMMINS CAT continuous Item ID: 9555 Runs Great!. Item ID 13740. Sam

(7.5K hrs) Brand new CAT transmission approx. 2000hrs ago.

CAT itself rebuilt the engine approx. 600hrs ago. Tires size x702

30.5 32 tire w/85% tread remaining. Dual arch with a winch.

Being used everyday! No issues! Very nice machine! Clean and tight!

BELL

1990 Bell Super T - This Bell has Contact: JOE aEmail: brandJoe@lumbermensco.com new Duetz engine. Lever Phone: 888-401-6367 EXTtranny 709 control, 33” bar, pump and

801-362-2170 ❘

 LumbermensCO.com

** CALENDAR**

‘97 Timberjack 240D Item ID: 13917

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

FOR CLASSIFIEDS 93’ Prentice 210

CallItem 888.401.MENS ID: 14216 Contact: AUSTIN See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Email: Austin@lumbermensco.com Fri, 18 August - Sun, 20 August Location of all equipment at Phone: 888-401-6367 EXT 703 Boonville, New York www.LumberMB\ISmagazine.com www.starwebhosting.net/woodsmen/

The Tree that Started it All!

BANDMILLS & HEADSAWS SOUTHWEST FOREST PRODUCTS EXPO Danckaert Resaw - Roughly Fri, 25 August - Sat, 26 August 2011 JohnBand Deere 648H

‘99 Hydro-Ax 511 EX Item ID: 13799

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

been rebuilt, it has a 24foot in Contact:has AUSTIN Email: Austin@lumbermensco.com feed deck 20 foot out feed deck 72ND ANNUAL GREAT LAKES Phone: 888-401-6367 EXT 703 with 44 inch wheels, and all the LOGGING & HEAVY EQUIPMENT EXPO

Thurs, 7 Sept - Sat, 9 Sept

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

Contact: SAM DESIGN DIRECTOR Email: Sam@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 702

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 2010 Vermeer HG6000 Columbia, TN 38402-1916 Horizontal Grinder (888) 401-6367

Item ID: 96128

AD SUBMISSIONS

765 HP C18 engine with 5000 hours Half of new chain May 6”, be4”,sent and apron 3 screens2” Extrato­ parts Call for more pictures!morris@lumbermens.co

Contact: POSTMASTER MARK Email: Mark@lumbermensco.com Send address changes to: Phone: 888-401-6367 EXT 708 Lumberman's Exchange

702-875-2703 P.O. Box 1916 Columbia, TN 38402

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's 16’itsCAT 545D Exchange, principles and Item ID: 14211 associates, are not held liable for errors or omissions. Reproduction, Contact: AUSTIN in whole or part, is prohibited with­ Email: Austin@lumbermensco.com out written consent.

Phone: 888-401-6367 EXT 703 ©2017 Woods Publishing

12’ John Deere 843K Item ID: 14212

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

Contact: AUSTIN Email: Austin@lumbermensco.comTHE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct Phone: 888-401-6367 EXT 703

in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Timberjack 230 Item ID 13876. Austin x703 Item ID: 1977 S & W 125 Band Mill with Contact:Caterpillar AUSTIN generator - Low hours Email: Austin@lumbermensco.com on the mill, electronic Set Phone: 888-401-6367 EXT 703computer OR 931-797-8029 works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

‘04 Fabtek 344B

Sam x702

** INFO LINK**

CARRIAGES & DRIVES

Item ID: JW-093430

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29 Item ID: 9901

'97 CAT 525 Original Cable Skidder

Detector's IncPulled . ..............

30 Bell's Machining .....................

27OfMetal One A Kind.

Has Never A Log. Owned By An Electric Company. Deal!

Brute Force Mfg. ..................... 31 Midwest Sharpening.............. 26 Contact: SAM Buck Equipment (AIM) ........

36 Mor bark ..................................... 9 Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 Corley Mfg ..............................

32 Multitek ...................................

12

Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage,

2004 Timbco 445EXL

sawyers cab, computer controls, Item ID: 14170

cabinet with electronic drives for 85% Undercarriage. carriage knees, husk including Contact: AUSTIN 48" bottom saw and 36" top saw Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

STACKING RAC

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

2016 Tigercat 604 E 34 Great Lakes Mfg. ....................

Row Electric ............................LOW 20 Hours, Excellent Condition, Very Hard To Find Dozer.

Sawmill Exchange .................. 11 Contact: SAM Select Sawmill .........................Email: 19 Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 Smith Sawmill ...........................

4

Hahn Machinery ...................... 3 Item ID:55393

The Paul Bunyan Show ......... 39 John Deere 748G3 Grapple Skidder

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Dyna Products ........................ 35 Empire Hydraulics ................... 8

Cable Skidder

Bought new in 2016. Has approx 1300 hours on it. Ready to go to work. Call for more Iron Bull ................................... 21 pictures!

Kilgore Saw ............................. 22 Contact: WALKER Email: Walker@lumbermensco.com Lignomat ................................. 24 Phone: 888-401-6367 EXT 707

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

D5H TSK

Item ID: 7098

Item ID: 95874

2004 John Deere 748G3 Grapple Skidder approx 10000 frame hours,

Union Grove Saw & Knife.. 2, 200 37on rebuilt motor, good transmission, strong machine, 30.5 tires,

direct drive, strong winch, everything works good, only thing it could

Universal Refiner ...................use 23is 1 pin/bushing on arch main boom. Call for more pictures!

Contact: MARK www.BakerProducts.net WoodMizer ................................ l Email: Mark@lumbermensco.com 800.S48.6914 I S73.663.7711 Phone: 888-401-6367 EXT 708 or 702-875-2703

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 27

L O G G I N G

12k hoursJohn runs Williams great tight center (888) section 401-6367 ext. 701 j@lumbermens.co

that up and down, with airbags, 07’goTigercat 724E Item two ID: 14218 it includes sets of Mcdonough

pressure guides. Top Casting wheel Contact: AUSTIN Selma, North Carolina Email: Austin@lumbermensco.com www.midatlantic-logging-biomass­ is supported on both sides. This Phone: 888-401-6367 EXT 703 expo.com/ is an extremely accurate machine

Item ID: 99807

MARKETING DIRECTOR

machine, with air strain conveyers

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Morris Woods '94 CAT 518 (888) 401-6367 ext. 704 Grapple Winch morris@lumbermens.co

bells and whistles, its a production

Escanaba, Michigan

Woods Publishing

ADVERTISING SALES

ItemonID: 14217 10 hours this machine since it

Hot Springs, Arkansas www.arkloggers.com

“Precision Under Pressure”

PRENTICE 410EX

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Item ID: 3280

Tight machine, no issues! It sits on a Pitts-trailer and it's currently operating, everyday! Owner just installed a brand new grapple on July 11. A/C not working properly, tires tread 60%. Works and runs smoothly. READY TO GO!

Hitachi EX 120 Excavator

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

Item ID: 25036

‘11 Tigercat 845C Item ID: 13927

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

'99 or 2000 Hitachi EX 120 excavator. Bucket with thumb.

New rebuilt motor. Undercarriage 95% or better. Has two modes of operation, 24 volt and 12 volt. Does not rotate when in 24 volt mode but does in 12 volt mode.

Not sure what that means. Was going to put on a logging attachment in place of the bucket but found another excavator with the attachment already in place and bought that instead.

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701

or (801) 319-9351

‘16 Halverson H140 Skidsteer (DEMO)

‘93 Barko 180B Item ID: 14077

‘93 John Deere Contact: Austin 548E

14083 x703 Ph: Item (888)ID: 401-6367 Item ID: JW-909632 Contact: AUSTIN Contact: J Williams Email: Austin@lumbermensco.com Ph: (888) 401-6367 x701 Phone: 888-401-6367 EXT 703

‘94 Caterpillar 320 Item ID: 13936

L O G G I N G

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘13 KMC 2500 Track Skidder 2012 Cat D6K XL

Item ID: ID: 14078 Item 14169 Contact: Austin Contact:Ph: AUSTIN (888) 401-6367 x703

‘11 Tigercat 620D 13428 Victory Ln. // PO Box 124

Item ID: 13929 Adams Center, NY 13606 Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Sam x702

grapple, 5,000 original hours.

Firewood Processor - This is

‘83 John Deere 4850

a Chomper Model 16 PDA

‘1414073 CAT 535C Item ID: Item ID: 13840 Contact: Austin Contact: SAM Ph: (888) 401-6367 x703

Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 with 1700 hours, in very good condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

automatice firewood processor

with John Deere power unit with

Low mile Mack truck with low hour 05 hood 8000 extenda-boom tight continuous turntable, continuous grapple, truck low mile because it's hauled to chain conveyer, way splitter, jobs, everything on truck8and loader is in goodon working condition. Selling because he bought a ponsse 20,000lb goose neck trailer.

Item ID Call for more pictures!

13916.

Austin Contact: MARK x703

made the best valued log splitter.

Handles logs up to 32”. Uses

Contact: TED new for $32,500.

Item ID 13865.

but electronic option is available. or better. 475 hp Cummins Contact:50% AUSTIN Email: Austin@lumbermensco.com Diesel. 7500 Hours. One owner.

Has Log Lift. Uses 4-way wedge Phone: 888-401-6367 EXT 703 adjustable to single two way. Great Well maintained. Item ID 13294.

FIREWOOD PROCESSORS Comes with a set of tracks.

log deck. Has a hydraulic grapple,

 Issue 364 385

minor hydraulic leaks. Winch works good. Just a good workingowner machine. and It’s been working with every day One comes allweather permitting. It has tight pins, good tires, strong engine and transmission works great. manuals and receipts.

Purchased

Item ID: Under 13911Carriage at Chipper - Cat

13HP Honda motor. Manual start

01’ Ponsee Bison in excellent condition. Runs great.

Forwarder 2010 Shop Built Wood Processor AUSTIN -Contact: It has a 353 Detroit diesel, 40 Email: Austin@lumbermensco.com inch insert tooth circle saw, foot Phone: 888-401-6367 EXT30 703

’99 Johngauges.

Deere 648 GCuts Grapplelogs / Cableup skidder a few amp to has 16”.

LOGGING EQUIPMENT BANDIT 1999 Bandit 1900 ‘05 TigercatTracked 230B Disc

- Small manufacturer in PA has

Value! PA. Item ID 12062. Sam x702

Item Sam ID: 14109 Item ID 13644. x702

low panel includes JD hours.

648GControl Grapple Skidder Item ID: 54867 tach, oil pressure, water temp and

Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 Sam x702

or (801) 319-9351

Email: Mark@lumbermensco.com Best Value PortableEXT Log Splitter Phone: 888-401-6367 708

702-875-2703

Firewood Processor - This is a

homemade processor with a 10’

Sam x702

2004 Bandit Beast Model 4680 -

Caterpillar Diesel engine 90's3412 Model Timberjack 240A ID:5300 14111 with Item 850 HP. hrs. Mill in

chain and kicker that all runs off condition. Just finished 10 Contact:good WALKER

Email: Walker@lumbermensco.com Acre clearing job, ready to work! of a 4 cylinder Mercedes power Phone: 888-401-6367 Remote control.EXT Big707 production unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

(11.5K hrs) Comes with the 426 CTR delimber.

Needs nothing. Clean tight, no slack, turn gear tight! Working everyday.

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Item ID: JW-986495 Contact: J Williams 6x6401-6367 Pre Hauler Ph: (888) x701 Item ID: 75311

Item ID: 13920 Contact: Austin CAT 559C Ph: (888)Item 401-6367 ID: 269 x703

capacity!. Item ID 13421. Sam x702 Contact: JOE BARKO Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 1994 Barko 160B - Electric

801-362-2170 knuckleboom, 30' boom, 75hp

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘05 Gehl CTL 70

‘95 John Deere C6 Tree Farmer

 List  seLL  exchange  buy  save

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID‘89 13185. x702 CATSam D4H LGP Item ID: 13999 1999 Barko 160D - new engine with

Contact: AUSTIN approximately 1500 hours. Hour Email: Austin@lumbermensco.com meter dont work. The last 2 owners Phone: 888-401-6367 EXT 703 have only used it to load trucks or as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

‘85 John BELL Deere 440D

Item ID: 12453 1990 Bell Super T - This Bell has AUSTIN aContact: brand new Duetz engine. Lever Email: Austin@lumbermensco.com control, 33” bar, pump and tranny Phone: 888-401-6367 EXT 703 ❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

'01 John Deere 648G3 Item ID: 90899

The Tree Excellentthat Condition Low Price!

Started Contact: SAMit All!

Email: Sam@lumbermensco.com Since 1986, Lumbermens Phone: 888-401-6367 EXT has 702

published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

John Deere 437C SOUTHWEST FOREST PRODUCTS EXPO Item ID: 1020 Fri, 25 August - Sat, 26 August Prentice 384 with 2010 model with 8500 hours, comes with a bucksaw, Hot Springs, Arkansas Bucksaw & Delimber has never had a delimber mounted on it and primarily www.arkloggers.com Item ID: 14213

been used around a sawmill.

Contact: AUSTIN 72NDContact: ANNUALAUSTIN GREAT LAKES Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 LOGGING & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 703

931-797-8029

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

Woods Publishing MID-ATLANTIC

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co John Deere 548G3

LOGGING & BIOMASS EXPO

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

‘03 John Deere 748GIII

Contact: AUSTIN DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 703

931-797-8029

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

j@lumbermens.co

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

May be sent to­ morris@lumbermens.co

Buncher S & W 125 Band Mill with Item ID: 14079 Caterpillar generator - Low hours Contact: on the mill,AUSTIN electronic computer Set Email: Austin@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702 ‘05 Transport Trailers Custom Log Pup Item ID: JW-538174 CARRIAGES & DRIVES

Menominee Saw ..................... 29

Bell's Machining ..................... 27 Item ID: 13948

Metal Detector's Inc. .............. 30

‘98 611 Ex-Hydro Ax

sawyers cab, computer ‘05 CAT TK560 controls,

Corley Mfg .............................. 32

cabinet with electronic Item ID: 14004 drives for carriage Midwest Sharpening..............Contact: 26 SAM knees, husk including 48" bottom saw and 36" top saw Email: Sam@lumbermensco.com Morbark ..................................... 9 Phone: 888-401-6367 EXT 702 Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Force Mfg. ..................... 31 Contact: Brute AUSTIN Email: Austin@lumbermensco.com Buck Equipment (AIM) ........ 36 Send address changes to: Phone: 888-401-6367 EXT 703

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's CAT 517 Exchange,‘06 its principles and Item ID:held 13869 associates, are not liable for errors or omissions. Reproduction, Contact: in whole orSAM part, is prohibited with­ Email: Sam@lumbermensco.com out written consent.

Phone: 888-401-6367 702 ©2017 WoodsEXT Publishing

is an extremely accurate machine

Baker ...................................... 5, 7

B & B Mfg. ............................... 18

POSTMASTER

Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

is supported on both sides. This

B. H. Payne .............................. 16

Contact: TED

AD SUBMISSIONS

Cambridge, Ohio www.ohioforest.org

** INFO LINK**

pressure guides. Top Casting wheel

Cardinal HD Carriage Contact:2010 SAM Email: Sam@lumbermensco.com Carriages (Sawmill) - Cardinal Phone: 888-401-6367 EXT 7021 Carriage line it includes carriage M&F Gauge ............................. 28 with onboard log turners, carriage Meadows Mill, Inc. ................ 33 drive, hyd pac for carriage,

Teds@lumbermensco.com MAILING ADDRESS Email: Phone: 888-401-6367 EXT 701 or (801) 319-9351

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

Contact: AUSTIN

Item ID: 1865

Austin Woods 215,000 pound Cat 235bz knuckle boom with 50 foot (888) 401-6367 ext. 703 reach. Needs about $7K in repairs. austin@lumbermens.co

it includes two sets of Mcdonough

Item ID532 13876.CAT Austin x703 Feller

THE Email: PAUL Austin@lumbermensco.com BUNYAN SHOW Fri,Phone: 6 Oct888-401-6367 - Sun, 8 OctEXT 703

CAT 235 BZ

that go up and down, with airbags,

feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ 06’ Franklin Q80 Item ID: 14214 KentuckyWoodExpo.aspx

Item ID: 13851

10 ‘80 hoursJohn on thisDeere machine 540B since it Item ID: 11345 has been rebuilt, it has a 24foot in Contact: AUSTIN feed deck 20 foot out feed deck Email: Austin@lumbermensco.com with 44 inch wheels, and all the Phone: 888-401-6367 EXT 703 bells and whistles, its a production

Hahn Machinery ...................... 3

Tigercat 604

Hurst Boiler 14 Item.............................

ID: 7436 Good rubber and less than 4000 hours, in excellent Iron Bull ...................................

21 condition!

Kilgore Saw ............................. 22 Contact: AUSTIN Email: Austin@lumbermensco.com Lignomat ................................. 24 Phone: 888-401-6367 EXT 703

931-797-8029

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

John Deere 437E The Paul Bunyan Show ......... 39

Item ID: 9508 Thomas Industrial Controls .....is 10 (1K hrs) Clean machine, everything tight.

STACKING RAC Ponsse Ergo Item ID: 7720

Union loweringGrove paymentsSaw ASAP & Knife .. 2, 37

12k frame hours, 2000 hours on new $30k Mercedes diesel engine, H73 head, head rotator just rebuilt, slewing system for crane rebuilt 2k hours ago, main pump resealed about 1k hours ago, comes with set of tracks!

Currently working, buying newer. Call for more Pictures

Universal ................... 23 Contact:Refiner JOE Email: Joe@lumbermensco.com WoodMizer ................................

Phone: 888-401-6367 EXT 709l

801-362-2170

Contact: MARK Email: Mark@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 708 I S73.663.7711 800.S48.6914 702-875-2703

Owner is getting out of the logging business and

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 29

L O G G I N G

Williams This skidder has John 4700 original hours and comes with a winch. Cab has heat & ac, tires are ext.

23.1 26.701 In excellent (888) 401-6367 condition!

Danckaert Band Resaw - Roughly

in ve1y good condition, Cuts 130

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

Item ID:DIRECTOR 985 MARKETING

BANDMILLS & HEADSAWS

machine, with air strain conveyers

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

210D Knuckleboom Loader on Truck

2004 CAT 517 Grapple Dozer

Item ID: 6694

Item ID: 70690

cat 517 swing boom grapple, enclosed cab, heat/air air needs a recharge, 8’ 6 way blade, 24” pads, good rollers, good sprockets, needs pads and turner pins, 4554 hours, majority of the last 2000 hours have been grading behind an excavator, very little logging. Call for pictures and video!

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

'94 Barko 160 Knuckleboom Item ID: 14186

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘16 Halverson H140 Skidsteer (DEMO)

replaced motor last year, 12,817 frame hours, leak on valve bank o ring, everything works as should, needs AC recharge, slasher grind saw 60"circle saw, truck runs good, clutch is a little loose, Is plumbed for groundsaw, new blower, 4x6 square tubing secures loader to frame, trailer frames great loader and truck!

Item ID: JW-909632

Contact:MARK J Williams Contact: Ph: (888) 401-6367 x701 Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

‘93 Barko 180B

Item ID: 14077 Contact: Austin ‘04 JCB 441 Wheel Ph: (888) 401-6367 Loader x703 Item ID: 13888

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘08 John Deere 335C Item ID: 14089

‘95 John Deere C6 Tree Farmer

L O G G I N G

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘99 Case 850G Long 13428 Victory Ln. // PO Box 124 ‘89 Timberjack 230A Track Dozer Item ID: 13909NY 13606 Adams Center,

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Item ID: 13885

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

off onto a conveyor. This is a very

well built processor. Item ID 13820.

“13 KMC 2500 Tack Skidder Item ID: 14078

Contact: AUSTIN ‘05 Gehl CTL 70 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Item ID: JW-986495

‘83 John Deere 4850

Contact: J Williams Ph: (888) 401-6367 x701

'09 John Deere 753J Buncher ID: 14106 chainItem conveyer, 8 way splitter, on

Item ID: 14073 Contact: Austin Contact:20,000lb AUSTINgoose neck trailer. Item ID Email: Austin@lumbermensco.com 13916. Austin x703 Ph: (888) 401-6367 x703 Phone: 888-401-6367 EXT 703 Best Value Portable Log Splitter

with 1700 hours, in very good

condition. Easily produces high

- Small manufacturer in PA has

made the best valued log splitter.

‘00 Timbco quality chips with patented ‘Cone’ Handles 445D logs up to 32”. Uses Item ID: 14096 drum design. Can easily load 42’ 13HP Honda motor. Manual start

Contact: AUSTIN vans and produce 6 - 8 loads per but electronic option is available.

Email: Austin@lumbermensco.com day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge Phone: 888-401-6367 EXT 703 EDGERS & GANGS adjustable to single two way. Great Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor 2015 Cat 525Dwith a 10’ ItemHas ID: a14167 log deck. hydraulic grapple,

Contact:chain AUSTIN 2010 Shop Built Wood Processor and kicker that all runs off - It has a 353 Detroit diesel, 40Email: Austin@lumbermensco.com of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 inch insert tooth circle saw, 30 foot unit. Has a 4’ chain saw that kicks  Issue 364 385

Lumbermens™  since 1986

❘

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Sam x702

‘09 John Deere Firewood Processor - This is 650J XLT

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID

‘95 Bell Ultra T

a Chomper Model PDA Item ID: 16 14091

automatice firewood processor Contact: AUSTIN Email: Austin@lumbermensco.com with John Deere power unit with Phone: 888-401-6367 EXT 703 low hours. Control panel includes

13238. Chris x700 Item ID: 14070

1995 BarkoAUSTIN 775 B Feller Buncher Contact: -Email: PumpsAustin@lumbermensco.com recently redone. 400 hrs Phone: 888-401-6367 EXT 703 on injection pump. always started

good. in good working order.

22in tach, oil pressure, water temp CAT and D4H TSK Cable Dozer w/Log Arch amp gauges. Cuts logs Equipment up to 16”.

kohing head. headItem works ID:great.

47648

Item ID 13185. Sam x702 One owner and comes1997 with all D4H TSK series 3, 7936 true hours, tracks and undercarriage approx 90% en-

cab with heat, winch/log arch, dry machine, complete cat service on all filters, 1999 Barko 160D - new engine with manuals and receipts. closed Purchased fluids, checked hoses and everything. Call for more pictures!

approximately 1500 hours. Hour

new for $32,500. Item ID 13865.

Sam x702

Contact: MARK Email: Mark@lumbermensco.com meter dont work. The last 2 owners Phone: 888-401-6367 EXT 708 or 702-875-2703

LOGGING EQUIPMENT BANDIT

have only used it to load trucks or

as a backup as needed. Has a CTR

'92 CAT 518C Cable Skidder

delimber, has been rebuilt.

Itemgrapple ID: 14107 Boom cylinders have minor leaks.

Chipper - Cat Under Carriage at Hard to Find “C” model in great shape!

Item ID 13694. Sam x702 50% or better. 475 hp Cummins 1999 Bandit 1900 Tracked Disc

Contact: 94AUSTIN Barko 275 - Excellent value Diesel. 7500 Hours. One owner.

Email: Austin@lumbermensco.com with low at hours at 3,500. 5.9 Well maintained. Item ID 13294.

Phone: 888-401-6367 EXT 703 CUMMINS continuous grapple.

Sam x702 2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

Runs Great!. Item ID 13740. Sam

‘02 Jackson Shavings Mill x702 Item ID: 13736 BELL

Contact:1990 AUSTIN Bell Super T - This Bell has good condition. Just finished 10 Email: Austin@lumbermensco.com a brand new Duetz engine. Lever Acre clearing job, ready to work!

Phone: 888-401-6367 EXT 703 control, 33” bar, pump and tranny Remote control. Big production

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

Quadco 2900 Intermittent Head FOR CLASSIFIEDS Item ID: 32295

Call 888.401.MENS See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at Contact: MARK Email: Mark@lumbermensco.com Boonville, New York Phone: 888-401-6367 EXT 708 www.LumberMB\ISmagazine.com or 702-875-2703 Intermittent Saw Head 2900 Quadco, great working condition, completely gone through recently, new teeth on disc saw, hoses and fluids checked.Call for more pictures!

www.starwebhosting.net/woodsmen/

The Tree

2010that Tigercat 724E Started

BANDMILLS & HEADSAWS SOUTHWEST FOREST PRODUCTS EXPO TIMBERJACK 460D / 648G III Danckaert Band Resaw - Roughly Fri, 25 August - Sat, 26 August Item ID: 34900

‘93 Barko 180B

it All!

Contact: AUSTIN Email: Austin@lumbermensco.com Since 1986, Lumbermens has Phone: 888-401-6367 EXT 703 published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

MID-ATLANTIC

LOGGING & BIOMASS EXPO

(888) ID: 401-6367 Item 43042

AD SUBMISSIONS

2007 John Deere 548G3 Grapple Skidder, 10,073 hours. Excellent condition, pictures show float tires but machine will come 28L's at 70% or better, completeto­ service on all fluids May be sent and filters done 16 hours ago, bushing and pin in turn cylmorris@lumbermens.co inder was replaced, everything else is tight, dry, and strong.

Call for more pictures and video!

POSTMASTER

Contact: MARK address changes to: Email:Send Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 Lumberman's Exchange

702-875-2703

P.O. Box 1916 Columbia, TN 38402

& 4 in 1 bucket.

Selma, North Carolina www.midatlantic-logging-biomass­ Contact: AUSTIN Email: Austin@lumbermensco.com expo.com/ Phone: 888-401-6367 EXT 703 OR 931-797-8029

B & B Mfg. ............................... 18

CAT D6H Grapple Dozer16 B. H. Payne ..............................

Item ID: 49272 Baker ......................................

1986 D6H grapple dozer, approx 5700 hours,5, cur-7

pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate700J machine JOHN DEERE Item ID: 2212 in ve1y good condition, Cuts 130 ('08) (4.5K hrs) One owner only, bought brand

Cambridge, Ohio www.ohioforest.org

** INFO LINK**

it includes two sets of Mcdonough

feet a minute also has new in '08, undercarriage 60%.CLT Has anpresses. issue with

Contact: AUSTIN THE PAUL BUNYAN SHOW Email: Austin@lumbermensco.com Phone: 888-401-6367 703 OR8931-797-8029 Fri, 6 OctEXT - Sun, Oct

EQUIPMENT REPS

MAILING ADDRESS

that go up and down, with airbags,

one or two pins on the rail that needs fixing. $2.5-$4K, therefore the cheap price. All maintenance has Sbeen &W 125 Mill with done on Band time. Reason for selling is owner needs to lower his overall monthly payments.

Item x703 QuotesID we13876. receivedAustin range between

Caterpillar generator - Low hours

Contact: JOE on the mill, electronic computer Set Email: Joe@lumbermensco.com

works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 709

801-362-2170

Cat 3406 140KW Genset, 12,400 hours ready to run.230A Item ID 13434.

TIMBERJACK

Item ID: 9450 Sam x702

CARRIAGES & DRIVES

1989 Model with factory 5.9 Cummins engine, power shift transmission, Hercules winch. Working daily.

2010 Cardinal HD Carriage

Contact: AUSTIN Carriages (Sawmill) - Cardinal Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029 Carriage line it includes carriage

M&F Gauge ............................. 28 Meadows Mill, Inc. ................ 33

with onboard log turners, carriage

drive, hyd pac2s for carriage, Kubota SVL-95 Item ID: 4861 Menominee Saw .....................This 29is in LIKE-NEW sawyers cab, computer controls, conditions. Only 420hrs. It’s currently on a small

rently working, everything on it is in good working Bell's tracks/undercarriage Machining .....................

27 condition, approx 75% recently had a new oil cool put on it. Call for more pictures and video! Force Mfg. ..................... 31 Brute

A/C - heat works.electronic It has the load sensing for closed with drives Metal Detector's Inc. ..............controls, 30 radio,cabinet center hydraulics with parallel loader control valve. Very tight machine. In addition to the diamond forestry mulching head, carriage knees, husk includingowner Midwest Sharpening.............. 26

Contact: MARK BuckMark@lumbermensco.com Equipment (AIM) ........ 36 Email: Phone: 888-401-6367 EXT 708 Corley 702-875-2703 Mfg .............................. 32

Multitek ...................................Phone: 12 888-401-6367 EXT 709 OR 801-362-2170

CRD Metalworks .................... 25 Item ID: 5627 The Lumberman's Exchange is (11K hrs) Ledgering CW Mill-ArmorHog ..............

17 system doesn’t work, trail wheel needs to be

Timbco 425

published monthly by Woods fixed. It does has new wiring and a new sensor. The undercarriage is at 40 with a 5.9 engine.

A/C - heat works! There's a computer glitch CW Mill-Hogzilla ...................

15 Publishing, P.O. Box 1916, (waiting to be fixed) where to tip the head back, you have to hit another function and then the head will move back.

The computer Columbia, TN 38402. All rightssystem has been checked and re-calibrated by Woodland Equipment Dyna Products ........................ 35 reserved. All editorial/ advertorial in (MI) 18mo. ago. It has a Risley processing head. submissions are used at the Contact: JOE Empire Hydraulics ................... 8 discretion of the publisher and Email: may Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170 be edited for purposes of clarity Great Lakes Mfg. .................... 34 and space. Although all efforts have Hahn Machinery ...................... 3 been made to ensure accuracy of Bell Ultra C content submitted by advertisers Hurst Boiler ............................. 14 Item ID: 1025 and writers, the Lumberman's Exchange, its principles and 1996 model with Joystick control and Koehring Iron Bull ................................... 21 associates, are not held liable for Head. errors or omissions. Reproduction, Kilgore Saw ............................. 22 Contact: AUSTIN in whole or part, is prohibited with­ Email: Austin@lumbermensco.com Lignomat ................................. 24 out written consent.

Phone: 888-401-6367 EXT 703 OR 931-797-8029 ©2017 Woods Publishing

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

job. Owner doesn’t need it any longer. It has high flow joystick

is including a blue diamond grapple and a bucket.

48" bottom saw and 36" top saw Contact: JOE Morbark .....................................

9 Email: Joe@lumbermensco.com

Piper's Saw Shop.................... 13 Rotochopper............................ 40 Row Electric ............................ 20 Sawmill Exchange .................. 11

STACKING RAC

Select Sawmill ......................... 19 Smith Sawmill ........................... 4 The Paul Bunyan Show ......... 39 Thomas Industrial Controls..... 10

07’ Tigercat 620C

Union Grove Saw Knife.. 2, 37 Item ID:&14248 Universal Contact:Refiner AUSTIN................... 23 Email: Austin@lumbermensco.com WoodMizer ................................ l Phone: 888-401-6367 EXT 703

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

848 G Grapple Skidder Item ID: 85843

2003 - 848 Grapple / cable – dual arch. Excellent condition, used daily. 35.5 tires at 40-50%. Tight center section and pins. Dual arch with winch.

Call for more pictures

Contact: TED Email: Teds@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 701 I S73.663.7711 800.S48.6914 or (801) 319-9351

❘ L!  (888) 401-MENS 401-MENS

NO. 31

L O G G I N G

Contact: AUSTIN DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 703

931-797-8029

Box 1916 JohnP.O. Deere 548G3 Columbia, TNSkidder 38402-1916 Grapple

Item ID: 6056& BIOMASS MID-ATLANTIC LOGGING Fri, 15 Sept - Sat,comes 16 Sept 2007 model with 5400 hours, with log forks,

Lexington, Kentucky Item ID: 7060 http://www.kfia.org/ 2007 model with 5634 original hours comes with KentuckyWoodExpo.aspx two year old 16’ bucksaw.

Item ID: 410

John Williams 95’ long frame with JD winch.ext.

Skidder is in excel(888)model 401-6367 701 lent condition. j@lumbermens.co

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

machine, with air strain conveyers

KENTUCKY WOOD EXPO Fri, 15PRENTICE Sept - Sat,2210 16 Sept

Timberjack 380C MARKETING DIRECTOR

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Escanaba, Michigan

CAT 928G

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

10 hours onnothis (‘05) pins and bushings all good, leaks,machine motor rebuiltsince approx. it 2.5K hrs ago, T/C (no direct drive). Two new back tires, front tires 35%. JD hasgrapple beenonrebuilt, it hrs, hasnew a injection 24footpump in 748G model bigger it. 13K frame 8mo. ago, new ECU. A/C - heat good!

feed deck 20 foot out feed deck Contact: AUSTIN 72ND ANNUAL GREAT LAKES Contact: JOE Email: Austin@lumbermensco.com Email: Joe@lumbermensco.com with 44 inch wheels, and all the LOGGING & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 709 OR 801-362-2170 Phone: 888-401-6367 EXT 703 Thurs, 7 Sept - Sat, 9 Sept bells and whistles, its a production

PUBLISHER

ADVERTISING SALES

Hot Springs, Arkansas www.arkloggers.com

Item ID: 14077

Item ID: 14247

John Deere 550G Dozer

“Precision Under Pressure”

650 G Dozer

Phone 315.284.4126Item ID: 85744 Fax John Deere 550G dozer, caged cab, 6 way blade, 22" pads, strong mo315.849.2045 tor, good transmission, tracks/undercarriage approx 90% Call for more Website pictures! www.empirehyd.com Email Contact: MARK info@empirehyd.com

Item ID: 53699

1998 650g John Deere 10,069 hours. With winch. Undercarriage - 70%. New transmission at 7500 hours. It has air ride seat. New c-frame bushing less than 250 hours on them. It works every day.

No issues.

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

‘93 Barko 180B

‘16 Halverson H140 Item ID:Grapple 14077 Tree Farmer - Cable Contact: Austin Item ID: 37092 Skidsteer (DEMO) Skidder

L O G G I N G

Ph: (888) 401-6367 x703 Hrs. unknown, but has not been used a lot. Pins and everything Item ID: JW-909632 tight. Starts very easy even in cold weather without ether. Very fuel efficient.

Small hydraulic leak. 23 X 32 tires. Set of almost new Contact: J Williams chains. Has owned it for 4 -5 yrs.

Ph: (888) 401-6367 x701

Tigercat 234 Knuckle Boom Loader Item ID: 68516

2012 Tigercat 234 loader, 7271 hours, with 264 ultra CSI delimber, on Kodiak series 3 hydraulic trailer, with 56" big grapple, very well kept, regular maintenance every 300 hours, greased often, everything is tight, dry machine ready to go. Call for more pictures!

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

John Deere 548E Grapple Skidder

Timberpro TL735B Tracked Feller Item ID: 64107 Buncher 735B approx 11k hours, rails and undercarriage approx 70% or better, heat/AC everything is in good working order, very well maintained, 13428 Victory Ln. // POgoodBox 124 completely gone through in October, new fluids all around, new filters, new hoses(about $3k worth) some cylinders replaced, some repacked. Call for Adams Center, NY 13606 more pictures!

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

John Deere 700H Item ID: 1324

13000 frame hours with a New undercarriage. No blow by, and doesn’t use any oil

‘05 Gehl CTL 70 Contact: AUSTIN

Email: Austin@lumbermensco.com Item ID: JW-986495 Phone: 888-401-6367 EXT 703 OR 931-797-8029

Contact: J Williams Ph: (888) 401-6367 x701

Brewer 9112 Gangsaw & 4004 Item ID: 18554 Notcher 3 phase Brewer Golden Eagle gangsaw double arbor, single rubber tire auto conveyer, way splitter, on feed for cants, chain like new blades and sleeves 8 spaces, washers are all like new.

Notcher infeed & outfeed with swing arm to push material to notcher, like new notcher, sawdust conveyer as wellneck as sawdust ventilation, electrical 20,000lb goose trailer.

Item ID panel, ready to go unit! Call for more pictures!

S A W M I L L

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS Meadows 2 Deluxe Sawmill

Brewco Saws - Two Brewco Saws Item ID: 80412

in excellent Runs great. deluxe new onboardcondition. computer, hydraulic cab control, 3 saw

miner edger, dual chain for sawdust from edger, 6 cylinder Cummins power unit, sawdust conveyer with electric Item ID275hp 13644.

Sam x702 motor, 24’ live log deck, comes with good 48” and 52” blades, saw wrench, electric jockey grinder for teeth, chain log turner, mill is on wheels and is portable, 14,000 board foot sawed in 9 hours with this mill!

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor -Contact: It hasMark@lumbermensco.com a MARK 353 Detroit diesel, 40 Email:

Phone: 888-401-6367 EXT 708 inch insert tooth circle saw, 30 foot

702-875-2703

 Issue 364 385

13916. Austin x703

Contact: MARK Email: Mark@lumbermensco.com Best Value Portable Log Splitter Phone: 888-401-6367 EXT 708 or 702-875-2703

condition. Easily produces high

Tigercat 615C

Item ID: 87307

Item ID: 17058

1995 John Deere 548E approx 500 hours on rebuilt motor through Erb equipment in Missouri, reman on transmission, center pins are fine, minor hydraulic seep here and there, new accumulator on hydraulic system, repaired release valve, 28L's back are new front are about 25% Call for more pictures!

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

‘83 John Deere 4850

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

2013 model with only 600 hours in like new condition, with size 30,5 tires.

‘95 John Deere C6 Tree Farmer

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘13 KMC 2500 Track Skidder

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

TimberPro 735B Item ID: 52609

Item ID: 14078 (‘08) (6.7K hrs) 8.3L Cummins engine w/Rolly 2 processor head. U/C Contact: Austin 50%, enclosed cab, leveling cab, A/C - heat works. It can also be capacity!. Item ID 13421. Sam x702 Ph: (888) 401-6367 x703 purchased without the ROlly 2 head

BARKO

Contact: JOE Email: Joe@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 709 OR 801-362-2170

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is a Chomper Model 16 PDA

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Timbco 820D hours. grapple, 5,000 original Item ID: 18370 (excellent condition.). Item ID

06’ model Clam bunk forwarder with Cummins engine.

13238. Chris x700

Contact: AUSTIN 1995 Barko 775 B Feller Buncher automatice firewood processor Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029 - Pumps recently redone.

400 hrs with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and

on injection pump. always started

good. in good working order. 22in

‘05 Woodmizer LT300

kohing head. works great.

Item ID:head 14031 Item ID 13185. Sam x702 One owner and comes with all Contact:1999 AUSTIN Barko 160D - new engine with manuals and receipts. Purchased Email: Austin@lumbermensco.com approximatelyEXT 1500703 hours. Hour new for $32,500. Item ID 13865.

Phone: 888-401-6367 931-797-8029 meter dont work. The last 2 owners Sam x702 amp gauges. Cuts logs up to 16”.

LOGGING EQUIPMENT BANDIT

have only used it to load trucks or

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

delimber, grapple has been rebuilt.

but electronic option is available.

50% or better. 475 hp Cummins

- Small manufacturer in PA has

made the best valued log splitter.

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

'16 LT40 Super Hydraulic

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a Item ID: 9903

homemade processor with a 10’ One Owner! 136 hours, Tons of log deck.

Has Priced a hydraulic grapple, Extra Parts. cheap! chain and kicker that all runs off Contact: SAM ofEmail: a 4 cylinder Mercedes power Sam@lumbermensco.com unit.

Has 888-401-6367 a 4’ chain saw that Phone: EXT kicks 702

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

Talon 900 Edger

2004 Bandit Beast Model Item ID: 69924680 -

3412 Caterpillar Diesel engine 2016 Timberking talon 900 3 blade edger, only 6 hours, $16,995.00 new, Gas engine 24.5 hp Koehler. Fully por-

with 850 5300 Mill in table, like newHP. Call for more hrs. pictures.

good condition.

Just finished 10 Contact: MARK Email: Mark@lumbermensco.com Acre clearing job, ready to work!

Phone: 888-401-6367 EXT 708 Remote control.

Big production

702-875-2703

 List  seLL  exchange  buy  save

as a backup as needed. Has a CTR Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Desjardin Shingle Mill

Runs Great!. Item ID 13740. Sam Item ID: 1970 x702

Good shape. Bought it 30 yrs ago from another owner. It did not get much use. Only used it to make shingles for his home.

BELL

1990 Bell Super T - This Bell has Contact: TED

aEmail: brandTeds@lumbermensco.com new Duetz engine. Lever Phone: 888-401-6367 EXT 701

control, 33” and tranny

or bar, (801)pump 319-9351 ❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

Precision Scragg Item ID: 3607

Precision Scragg, excellent condition, Themotor, Tree 40 hp twin saw 4,6,8,and 10 inches, canthat send Started video of it running, Va Area

it All!

Contact: TED Email: Teds@lumbermensco.com Since 1986, Lumbermens Phone: 888-401-6367 EXT 701has published or (801) 319-9351 a monthly circular

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

SOUTHWEST FOREST PRODUCTS EXPO '02 WoodMizer LT-40 Fri, 25 AugustItem - Sat,ID:2611345 August Hot Springs, Arkansas Kubota Diesel engine. www.arkloggers.com

Sanborn Scragg Mill Item ID: 14050

Contact: AUSTIN Contact: AUSTIN 72NDEmail: ANNUAL GREAT LAKES Austin@lumbermensco.com Email: Austin@lumbermensco.com LOGGING & HEAVY EQUIPMENT Phone: 888-401-6367 EXTEXPO 703 Phone: 888-401-6367 EXT 703

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

Edmiston Complete Sawmill Package MID-ATLANTIC LOGGING & BIOMASS Item ID: 14084

Woods Publishing

Contact: AUSTIN MID-ATLANTIC ADVERTISING SALES Email: Austin@lumbermensco.com LOGGING & BIOMASS EXPO Phone: 888-401-6367 EXT 703

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Fri, 15 Sept - Sat, 16 Sept

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

Item ID: 14118

John Williams (888) 401-6367 ext. 701Has the Kubota Diesel Motor! j@lumbermens.co

Contact: AUSTIN

DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger

Phone: 888-401-6367 EXT 703

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 7021998 Timber sam@lumbermens.co Bandmill

Lexington, Kentucky LT70 ‘06 Woodmizer http://www.kfia.org/ Electric KentuckyWoodExpo.aspx Item ID: 14076

AUSTIN THE Contact: PAUL BUNYAN SHOW Email: Austin@lumbermensco.com Fri,Phone: 6 Oct888-401-6367 - Sun, 8 OctEXT 703

Harvester 30HT25

Cambridge, Ohio www.ohioforest.org

Item ID: 32925

** INFO LINK**

Timber harvester 25ht30 can cut 30” diameter 21’ long logs, 35hp gas motor, mill is totally hydraulic, new battery, 16 New blades, comes 703with owners manual and maintenance records. Call for more pictures!

Austin Woods (888) 401-6367 ext. austin@lumbermens.co

MAILING ADDRESS

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

B & B Mfg. ............................... 18 P.O. Box 1916 Columbia, TN 38402-1916 H. Payne .............................. 16 (888) 401-6367 PrecisionB.Scragg Item ID: 3607

Baker ...................................... 5, 7 AD SUBMISSIONS Excellent condition, 40 hp twin saw motor. The saw motors are 40HP 1780 RPM currently wired for 480v.—-spinning May be sent to­ Lincoln Bell's .....................

36 inch F pattern circle Machining saws. The hydraulic power pack is27 a

10Hp motor also 480V. Scragg will handle 12 foot and up to 14 morris@lumbermens.co

POSTMASTER

inches in diameter easy. Scragg in great shape. has been run Brute Mfg. ..................... 31 very little. Can send videoForce on request.

Send address changes to: Contact: TEDBuck Equipment (AIM) ........ 36 Email: Teds@lumbermensco.com Lumberman's Exchange Phone: 888-401-6367 EXT 701 or (801) 319-9351 32 Corley Mfg ..............................

P.O. Box 1916 Columbia, TN 38402 CRD Metalworks .................... 25

Frick #1 Jumbo Mill

The Lumberman's Exchange is ID: 200 CW Item Mill-ArmorHog .............. 17 published monthly by Woods Complete operation that includes ................... a meadows CW Mill-Hogzilla 15 Publishing, P.O. Box 1916, edger, HMC V206 Debarker, 48” Chipper, blower, live decks, and many other spare parts.

Columbia, TN 38402. All rights Dyna Products ........................ 35 reserved. All editorial/ advertorial Contact: AUSTIN submissions are used at the Empire Hydraulics ................... 8 Email: Austin@lumbermensco.com discretion of the publisher and Phone: may 888-401-6367 EXT 703 OR 931-797-8029 be edited for purposes of clarity Great Lakes Mfg. .................... 34 and space. Although all efforts have Hahn ...................... been made to ensure accuracy of Quality 4 Machinery Head Trim Saw 3 content submitted by advertisers Item ID: 1559 Hurst Boiler ............................. 14 and writers, the Lumberman's Exchange, its principles and Ready to run, operates from either end, Va Area Iron Bull ................................... 21 associates, are not held liable for errors or omissions. Reproduction, Contact: TED Kilgore Saw ............................. 22 Email: Teds@lumbermensco.com in whole or part, is prohibited with­ Phone: 888-401-6367 EXT 701 Lignomat .................................

24 out written consent.

or (801) 319-9351 ©2017 Woods Publishing

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

M&F Gauge ............................. 28 Meadows Mill, Inc. ................ 33 Menominee Saw ..................... 29

Corley Complete Sawmill Metal Detector's Inc. ..............

30 Item ID: 14035 Midwest Sharpening.............. 26 Contact: AUSTIN Mor bark ..................................... 9 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Multitek ................................... 12 Piper's Saw Shop.................... 13 Rotochopper............................ 40 Row Electric ............................ 20 Sawmill Exchange .................. 11

BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it

Danchaert Band Resaw

has been rebuilt, it has a 24foot in Item ID: 13876 feed deck 20 foot out feed deck Contact: AUSTIN Email: with 44Austin@lumbermensco.com inch wheels, and all the Phone: 888-401-6367 EXT 703 bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703

‘14 Hurdle 3-HD

S & W 125 Band Sawmill Mill with Block Item ID: 13997 Caterpillar generator - Low hours on the mill,AUSTIN electronic computer Set Contact: Email: Austin@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls,

‘13 Woodmizer 4000drives Sawmill cabinet with electronic for Item ID: 14000 carriage knees, husk including Contact: 48" bottomAUSTIN saw and 36" top saw Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

STACKING RAC

Select Sawmill ......................... 19 Smith Sawmill ........................... 4 The Paul Bunyan Show ......... 39 Thomas Industrial Controls..... 10

LT40 Union Wood-Mizer Grove Saw & Knife .. 2, 37 Item ID: 13995 Universal Refiner ................... 23 Contact: AUSTIN Email: Austin@lumbermensco.com WoodMizer ................................ l Phone: 888-401-6367 EXT 703

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

Hurdle #2 Sawmill Item ID: 8720

2016 Complete sawmill package, includes precision chip pack, 80ft vibrating conveyer, HMC Debarker, Morgan Slab edger, 3 strand log deck, and more.

Contact: AUSTIN Email: Austin@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 703 800.S48.6914 I S73.663.7711

931-797-8029 ❘ L!  (888) 401-MENS 401-MENS

NO. 33

S A W M I L L

MARKETING DIRECTOR'02 Woodmizer LT-40 Super HD

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

Phone 315.284.4126 Fax 315.849.2045Item ID: 13956 Website Contact: AUSTIN www.empirehyd.com Email:Email Austin@lumbermensco.com info@empirehyd.com Phone: 888-401-6367 EXT 703

Woodmizer Twin Blade Diesel Edger

‘08 Timberking B20

“Precision Under Pressure”

Item ID: 14191

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

S A W M I L L

‘93 Barko 180B

‘16 Halverson H140 Item ID: 14077 Contact: B1600 Austin Resaw Skidsteer (DEMO) ‘06 Brewco Item ID: 13862 Ph: (888) 401-6367 x703 Item ID: JW-909632 Contact: SAM Contact: J Williams Email: Sam@lumbermensco.com Ph: (888) 401-6367 x701 Phone: 888-401-6367 EXT 702

Woodmizer LT300 Item ID: 7566

Sawmill

Item ID: 30151

Approx 5000 includes, infeed conveyer, log deck, and 50’ x 8’ greenchain, command control center, accuset set works, good mill 30 HP 3 phase electric motor. Call for more pictures!

4 cylinder Perkins Motor, 30” wheels (29” cut width). Handles logs 3’ to 23’ . Built by an Amish fellow that use to do a lot of these. It is about 10-15 yrs old. Runs great. Doesn’t have any hydraulic assist. Selling to upgrade.

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701

or (801) 319-9351

03’ Woodmizer LT-300 Operation Item ID: 14171

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Cutoff Trim Saw Item ID: 5461

Trim Saw - 12000 10 HP motor on cutoff blade, 5 HP motor on feed chain. Like new, less than 200 hrs

‘05 Gehl CTL 70

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXTJW-986495 701 or (801) 319-9351 Item ID:

MISCELLANEOUS

‘83 John Deere 4850

Contact: J Williams Ph: (888) 401-6367 x701

Stac Trac

Item ID: 96875

chain conveyer, 8 way splitter, on Item ID: 14073 Don’t know the hours but it works really good for band mills or stacking lots of squares 20,000lb goose neck trailer. Item ID Contact: Austin 13916. Austin x703 Ph: (888) 401-6367 x703Contact: TED Morbark – Stac Trac - Has electric motor and 30 ft track.

Email: Teds@lumbermensco.com Phone: 888-401-6367 701 or (801) Best ValueEXT Portable Log319-9351 Splitter

‘95 John Deere C6 Tree Farmer

Item ID: 14078#2 Deluxe Meadows Contact: Austin Item ID: 14250 Ph: (888) 401-6367 x703

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood

13238. Chris x700

Contact: AUSTIN 1995 Barko 775 B Feller Buncher processor Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

with John Deere power unit with

low hours. Control panel includes

manuals and receipts. Purchased

1999 Barko 160D - new engine with

Sam x702

meter dont work. The last 2 owners

new for $32,500. Item ID

Contact: TED approximately 1500 hours. Hour 13865.

Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

LOGGING EQUIPMENT BANDIT

but electronic option is available.

50% or better. 475 hp Cummins

day. Item ID 13882. Austin x703

EDGERS & GANGS

Samsung SL150 Wheel Loader

Brewco Saws - Two Brewco Saws Item ID: 98970

SL150, condition. articulating wheel loader with inModel excellent Runs great. enclosed cab, forks and bucket, 158 HP Cummins diesel. Very nice.

Mid 90’s machine Item ID 13644.

Sam x702 but very well maintained. Compares to JD 644. Weight 29,800. Call for more pictures!

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor Contact: MARK - Email: It has aMark@lumbermensco.com 353 Detroit diesel, 40 Phone: EXT30708 inch insert888-401-6367 tooth circle saw, foot

702-875-2703  Issue 364 385

Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

84 Ford L9000

Value! PA. Item ID 12062. Sam x702 Item ID: 62253 Firewood Processor - This is a 1984 Ford L9000. 350 Big Cam Cummins. Eaton homemade withSuspension. a 10’ Fuller 10 speedprocessor trans. Hendricks Drive tires 60% mud terrain. Steer tires 90% log deck.

Has a hydraulic grapple, Pintle hitch with air hookups. Great truck. Pulls and stands up well. Call for more pictures.

chain and kicker that all runs off Contact: TED Mercedes power of a 4 cylinder

Email: Teds@lumbermensco.com Phone: EXTthat 701kicks unit.

Has888-401-6367 a 4’ chain saw

or (801) 319-9351

Lumbermens™  since 1986

❘

on injection pump. always started

Cornell edger size 4”-27” edger, with infeed table. Has arch on top ID of edger.

20 Sam HP electric Item 13185. x702motor. Selling because it hasn’t been used much. Call for more pictures.

laser One owner and comes with all

1999 Bandit 1900 Tracked Disc

vans and produce 6 - 8 loads per

- Pumps recently redone. 400 hrs

good. in good working order. 22in Cornell Edger Item ID:great.

33423 kohing head. head works amp gauges. Cuts logs up to 16”. tach, oil pressure, water temp and

Handles logs up to 32”. Uses

13HP Honda motor. Manual start

motor, Rotobec continuous

Model 30D6

quality chips with patented ‘Cone’ drum design. Can easily load 42’

capacity!. Item ID 13421. Sam x702 Contact: AUSTIN BARKO Email: Austin@lumbermensco.com Phone: 888-401-6367 1994 Barko 160B - ElectricEXT 703

931-797-8029 knuckleboom, 30' boom, 75hp Item ID: 1271 (excellent condition.). Item ID

- Small manufacturer in PA has

made the best valued log splitter.

Item ID: 6307

1995 model with automatic setworks, variable speed feed & hydraulic conveyer.

1996 grapple, Jackson Shavings Mill 5,000 original hours.

with 1700 hours, in very good

condition. Easily produces high

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703Saw Cornell Double End Trim

‘13 KMC 2500 Track Skidder

Chipper - Cat Under Carriage at

Bandit Grinder - Chipper

Diesel. 7500 Hours. One owner.

Item ID: 72593 Well maintained. Item ID 13294.

This is a 2017 Bandit 3680 875 hp CAT bought it new

10-17 itx702 has 1000hrs+\- Still running it some. It has the Sam new design 30 tooth mill and also had a new tail shaft and new anvil and gate. Also has a set of 3” baffled 2004 Beast Model screensBandit for it that only have about 30hrs 4680 on them.- This is

a strong tier 2 machine owner operated they are selling becauseCaterpillar they upgraded toDiesel a 1200hpengine machine, there is 3412 nothing wrong with this machine and it is ready to work!

If sold they can transport anywhere in Florida with 850 HP. 5300 hrs. Mill in or to the FL state line to reduce transportation cost for the buyer.

You won’t find a grinder in this good of shape anywhere.

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

Hud-Son

CUMMINS continuous grapple.

360 Portable Sawmill Runs Great!.

Item ID8841 13740. Sam Item ID:

x702 Hud-Son Portable Sawmill year 2016 1000 hours

BELL

model H360 35 HP motor Hydraulic Log Dog Hydraulic Back Stop Sterling ProCut saw blade 13Ft 11in 7/8 TS/ 1 1/4 PV 121 Peavy Hook

good condition. Just finished 10

1990 Bell Super T - This Bell has

Email: Teds@lumbermensco.com Phone: 888-401-6367 701 Remote control. BigEXT production

or (801) 319-9351

Phone: 33” 888-401-6367 701 control, bar, pumpEXT and tranny

Contact: TED job, ready to work!

Acre clearing

 List  seLL  exchange  buy  save

TEDDuetz engine. Lever aContact: brand new Email: Teds@lumbermensco.com

or (801) 319-9351

❘

 LumbermensCO.com

** CALENDAR**

MorbarkFOR Chipper Item ID: 43812 CLASSIFIEDS

Call 888.401.MENS See pictures, prices, and NY STATE WOODSMEN'S FIELD Fri, 18 August - Sun, 20 August Location of all equipment at Contact: TED Boonville, New York Email: Teds@lumbermensco.com www.LumberMB\ISmagazine.com Phone: 888-401-6367 EXT 701 or (801) 319-9351 6 knife - 58” chipper with 3 pocket blanks in it. 2nd owner.... 1st owner could not make payments so Morbark bought it back. Was like new 5 years ago when 2nd owner DAYS purchased it.

www.starwebhosting.net/woodsmen/

Desjardin Shingle Machine Item ID: 1970

The Tree

BANDMILLS & HEADSAWS Precision Chipper SOUTHWEST FOREST PRODUCTS EXPO 2005 Peerless 45’ Walking Floor - Roughly Item ID: 4524 Fri, 25 August - Sat, 26 August TrailerDanckaert Band Resaw Item ID: 83112 Hot Springs, Arkansas www.arkloggers.com

10 hours on this machine since it

PTO driven, Blade 37 1/2, runs that Started great Massachusetts Area

66 inch ReBuilt Precision Chipper good shape

Contact: TED Email: Teds@lumbermensco.com Since 1986, Lumbermens Phone: 888-401-6367 EXT 701has published or (801) 319-9351 a monthly circular

Contact: TED 72ND ANNUAL GREAT LAKES Email: Teds@lumbermensco.com Contact: MARK with 44 inch wheels, and all the Phone: 888-401-6367 EXT 701 LOGGING & HEAVY EQUIPMENT EXPO Email: Mark@lumbermensco.com

or (801) 319-9351 Phone: 888-401-6367 EXT 708 or 702-875-2703

it All!

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

'08 Dynamic Chipper Item ID: 14196

MID-ATLANTIC LOGGING & BIOMASS 2008 conehead dynamic chipper model 585 1762 hours great Fri, 15 Sept - Sat, 16 Sept condition 500 hp john deere comes with $2k worth of new knives

Morris Woods Phone: 888-401-6367 EXT 708 or 702-875-2703 (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR '99 Peterbilt Road Tractor

KENTUCKY WOOD EXPO Fri, 15 Sat, 16 Sept 35Sept Ton- Lowboy Trailer

Lexington, Kentucky Item ID: 95716 http://www.kfia.org/ 35 Ton lowboy trailer. New brakes, new drums, KentuckyWoodExpo.aspx new bearings and seals.

John Williams Item ID: 14188 (888) 401-6367 ext. 701 j@lumbermens.co Contact: AUSTIN

DESIGN DIRECTOR Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 Morbark Chipper (888) 401-6367

Item ID: 80356

AD SUBMISSIONS

TED THE Contact: PAULTeds@lumbermensco.com BUNYAN SHOW Email: Phone: 888-401-6367 EXT 701 Fri, 6 Oct Sun, 8 Oct

or (801) 319-9351

** INFO LINK** B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16 Item ID: 28802 Baker ...................................... 5, 7

Meadows Mill, Inc. ................ 33

855 Cummings 350 KW

Morbark 58” LIKE NEW

Menominee SawID: .....................

29 Item 6114

Totally rebuilt 58 inch real May by be pro. sent to­ clean nice piece.

855 Cummings 350kw gen set enclosed with belly tank. 300 original hours since new.

Bell's Machining ..................... 27 Other generators available.

Metal . ..............

30 2 vibratingDetector's conveyer, it is aInc 2017 model with only

Contact: TED POSTMASTER Email: Teds@lumbermensco.com Send address changes to: Phone: 888-401-6367 EXT 701 Lumberman's Exchange

or (801) 319-9351

Brute Force Mfg. ..................... 31 Contact: TED Email: Buck Teds@lumbermensco.com Equipment (AIM) ........ 36 Phone: 888-401-6367 EXT 701 Corley Mfg or (801) 319-9351 ..............................

32

Midwest Sharpening.............. 26 Contact: AUSTIN Mor bark ..................................... 9 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Multitek ...................................

12

931-797-8029

morris@lumbermens.co

P.O. Box 1916 Columbia, TN 38402

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have CAT 3412 - 600KW Prime been made to ensure accuracy of Item ID:by 85729 content submitted advertisers and writers, the Lumberman's Has 233 original hours & 1 hour running time on Exchange, its principles andWill do load new sleeves, pistons, & bearings. associates, are not held liable for test before loading. errors or omissions. Reproduction, Contact: in whole TED or part, is prohibited with­ Email: Teds@lumbermensco.com out written consent. EXT 701 Phone: 888-401-6367

or©2017 (801) 319-9351 Woods Publishing

This chipper comes equipped with chip pack and 20’ hours on it! In like new condition!

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

CAT D349 Gen 2 Great Lakes Mfg. .................... 34

Item ID: 227 Hahn Machinery ...................... 3

Marathon Generator 208-220-230-240V, 480V transfer box, includes control panel, Hurstsafeties, Boiler .............................

14 engine governor, dual electric starter, 750KW/60HZ, 887KVA, load tested/ serviced, 940 ................................... original hours, 1100hp diesel.

Iron Bull 21 Several other generators also available

Kilgore Saw ............................. 22

Contact: TED Email: Teds@lumbermensco.com Lignomat .................................

24 Phone: 888-401-6367 EXT 701

or (801) 319-9351

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Smith Sawmill ........................... 4 The Paul Bunyan Show Blockbuster 1412.........

Plus39 Item ID: 958 Thomas Industrial Controls..... 10

bells and whistles, its a production

machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine

in ve1y'93 good condition, Cuts 130 KW 425 CAT Item ID:13342 feet a minute also has CLT presses.

Item 13876.

Austin x703Inframe withIDten speed 220 twenty four feet of frame beS & W 125 Band Mill with hind the cab Caterpillar generator - Low hours on the mill,WALKER electronic computer Set Contact: Email: Walker@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 707 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage,

2016 Barko Tree Chipper

sawyers cab, computer controls, Item ID: 16688

cabinet with electronic drives for

150 hours. 550 Cimmins engine. Can handle

trees up toknees, 22 incheshusk in diameter. carriage including

48" bottomTED saw and 36" top saw Contact: Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701

or (801) 319-9351

STACKING RAC Freightliner 1990 Item ID: 1990

Comes with 8 way and 6 was& splitting head.

Machine Union Grove Saw Knife .. 2, 37 is

MILES-322,470 CUMMINS motor with Jake brake 9 speed Eaton fuller Air ride over spring suspension 11.22.5 fair tires 15’ 10” of frame from cab back Had A.C. but doesn’t work. Originally had a water tank on it.

Universal Contact:Refiner AUSTIN................... 23 Email: Austin@lumbermensco.com WoodMizer ................................

Phone: 888-401-6367 EXT 703l

931-797-8029

Contact: TED Email: Teds@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 701 I S73.663.7711 800.S48.6914 or (801) 319-9351

2015 model with PLUS package and only 50 hours on it. in like new condition.

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 35

M I S C E L L A N E O U S

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

new drum with about 6o hours inch thick heavy duty skin

MID-ATLANTIC MARK ADVERTISING SALES Contact: LOGGING & BIOMASS EXPO Email: Mark@lumbermensco.com

Donna Heninger

peerless 45’ walking floor, refurbished, dot tagged, couple slats on thehas verybeen end are knickedituphas a bit, breaks good, rebuilt, a 24foot in tires decent, overall good condition, 96” wide. Call for more pictures! feed deck 20 foot out feed deck

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

1990 Freightliner Item ID: 7422

'10 Woodsman 440 Whole Tree Chipper Item ID: 14105

3,000 original hours.

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘16 Halverson H140 Skidsteer (DEMO)

Cummins motor w/Jake Brake, 9 speed Eaton Fuller, Air Ride over spring suspension, 11.22.5 fair tires, 15'10" of frame from cab back, has A/C but not Item ID: JW-909632 working, 322,470 miles

Western Star Heavy Haul Item ID: 14093

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Contact: J Williams Contact: TED Ph: (888) 401-6367 x701 Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701

or (801) 319-9351

‘93 Barko 180B

Item ID: 14077 Contact: Austin AM General M818 Army Truck Ph: (888) 401-6367 x703 Item ID: 14576

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

‘04 Takeuchi TLN140

M I S C E L L A N E O U S

Item ID: JW-880805

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘13 KMC 2500 Track Skidder

Shop Built Firewood Processor 13428 Victory Ln. // PO Box 124

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

Item ID: 13994NY 13606 Adams Center,

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

off onto aMorbark conveyor. This is a very 2007 Chipper Item ID: 9658 well built processor.

Item ID 13820.

‘06 Cord King Model 60 Item ID: 14068

‘05 Gehl CTL 70 Contact: AUSTIN

‘83 John Deere Shop Built Wood 4850 Processor

Item ID: 14073 Item ID: 14038 Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 with 1700 hours, in very good condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item"Like ID 13644.

Sam x702 New" Tajfun

Firewood Processor FIREWOOD PROCESSORS

Item ID: 14249 2010 Shop Built Wood Processor AUSTIN -Contact: It has a 353 Detroit diesel, 40 Email: Austin@lumbermensco.com inch insert tooth circle saw, 30 foot Phone: 888-401-6367 EXT 703  Issue 364 385

Email: ID: Austin@lumbermensco.com Item JW-986495 Phone: 888-401-6367 Contact: J Williams EXT 703 Ph: (888) 401-6367 x701

Sam x702 model 22. Everything works like it should...

Ready to go to Firewood Processor - This is work! aContact: ChomperWALKER Model 16 PDA Email: Walker@lumbermensco.com automatice firewood processor Phone: 888-401-6367 EXT 707 with John Deere power unit with or 931-797-3915 low hours. Control panel includes

tach, oilLumber pressure, water temp and 02’ Jackson Harvester Item ID:Cuts 1187 amp gauges. logs up to 16”.

chain conveyer, 8 way splitter,Model on 20,000lb goose neck trailer.

13916. Austin x703

Best Value Portable Log

One owner and comes 30D10, entire operation includes with knife all grinder, 30ft leg dust collector, two cilos, open top trailers, dust Item ID manuals and receipts.

Purchased collector, blower unit, and Bagger. One owner machine new for $32,500. Item ID 13865.

Contact: AUSTIN Email: Austin@lumbermensco.com Splitter Sam x702 Phone: 888-401-6367 EXT 703 OR 931-797-8029

- Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

LOGGING EQUIPMENT BANDIT 1999 Bandit 1900 Disc ‘83 InternationalTracked S-Series

Item ID: Under 14080Carriage at 13HP Honda motor. Manual start Chipper - Cat Contact:50% AUSTIN but electronic option is available. or better. 475 hp Cummins Email: Austin@lumbermensco.com Diesel.

7500 Hours.

One owner.

Has Log Lift. Uses 4-way wedge Phone: 888-401-6367 EXT 703 adjustable to single two way. Great Well maintained. Item ID 13294.

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Sam x702

2004 Bandit Beast Model 4680 -

3412 Caterpillar Diesel engine homemade processor with a 10’‘06 Western Star Michigan Special ID:5300 14011 with Item 850 HP. hrs. Mill in log deck. Has a hydraulic grapple, chain and kicker that all runs off condition. Just finished 10 Contact:good AUSTIN Email: Austin@lumbermensco.com Acre clearing job, ready to work! of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 Remote control. Big production unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

 List  seLL  exchange  buy  save

‘95 John Deere C6 Tree Farmer Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

‘15 Cord King M44

ID:13421.

13961Sam x702 capacity!.Item Item ID

BARKO Contact: AUSTIN Email: Austin@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 703 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

Morbark 40/36

good. in good working order. 22in Item ID: 647 kohing head. head works great.

It has a CAT engine (755hp) with a sloped live

floor and top feedwheel.

Brand new clutch Item IDlarge 13185.

Sam x702 installed. Ready to work!!!

1999 Barko 160D - new engine with Contact: JOE approximately 1500 hours. Hour Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 meter dont work. The last 2 owners

801-362-2170 have only used it to load trucks or as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL 3 Strand Log Deck

Item ID: 14095 1990 Bell Super T - This Bell has

AUSTIN aContact: brand new Duetz engine. Lever Email: Austin@lumbermensco.com control, 33” bar, pump and tranny Phone: 888-401-6367 EXT 703 ❘

 LumbermensCO.com

** CALENDAR** GMC LOG TRUCK Item ID: 5037

1995 model with new 6 liter engine with 60000 miles on it, good tires, has split 5 gear transmission.

NY STATE WOODSMEN'S FIELD DAYS Contact: Fri, 18AUSTIN August - Sun, 20 August Email: Austin@lumbermensco.com Boonville, New York Phone: 888-401-6367 EXT 703 OR 931-797-8029

www.starwebhosting.net/woodsmen/

'99 International 4700 Chip Truck

SOUTHWEST FOREST PRODUCTS EXPO International Boom Truck Fri, 25 August - Sat, 26 August Item ID: 84573

Item ID:Tree 14116 The

Hot Springs, Arkansas Good running boom truck. Call for more www.arkloggers.com and info.

that Started Only 71,697 Miles. it All!

Contact: AUSTIN Email: Austin@lumbermensco.com Since 1986, Lumbermens has Phone: 888-401-6367 EXT 703 published a monthly circular

Contact: 72NDMARK ANNUAL GREAT LAKES Email: Mark@lumbermensco.com LOGGING & HEAVY EXPO Phone: 888-401-6367 EXTEQUIPMENT 708 or 702-875-2703

Thurs, 7 Sept - Sat, 9 Sept

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

Item ID: 44131 MID-ATLANTIC LOGGING & BIOMASS Unit has 200 original Fri, 15 Sept -hours.

Sat, 16 Sept

Woods Publishing

(888) 401-6367 ext. 704 Item ID: 8062 morris@lumbermens.co

It has all new wiring, LED lights, air pin lock, turn table MARKETING DIRECTOR super tight with a 25' long bed.

Those 4 bunks are in new conditions. Rear brakes are almost ready to be reJohn Williams placed. Good trailer, work-ready!

(888) 401-6367 ext. 701

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 '91 Fuel Harvester Columbia, TN 38402-1916 Tub Grinder (888) 401-6367

Item ID: 14112

AD SUBMISSIONS

3406 CatMay engine and to­ 4424 total be sent machine hours. morris@lumbermens.co

POSTMASTER Contact: AUSTIN Send address changes to: Email: Austin@lumbermensco.com Lumberman's Exchange Phone: 888-401-6367 EXT 703 P.O. Box 1916 Columbia, TN 38402

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have Truck been359 madePeterbilt to ensure accuracy of Item ID: content submitted by7841 advertisers andmodel writers, the Lumberman's 1987 with 600,000 Miles. Has 400 Cummins engine, air ride suspension, 40 rears, and and all new drive Exchange, its principles tires.

Can be soldare with not or without log trailer associates, helda Pitts liable for errors or omissions. Reproduction, Contact: AUSTIN in whole or part, is prohibited with­ Email: Austin@lumbermensco.com out written consent.

Phone: 888-401-6367 EXT 703

931-797-8029 ©2017 Woods Publishing

Item ID: 8256 has been rebuilt, it has a 24foot in

feed deck 20 foot out feed deck Contact: AUSTIN Email: Austin@lumbermensco.com with 44 inch wheels, andEXT all the Phone: 888-401-6367 703

931-797-8029 bells and whistles, its a production that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15MACK Sept -CHN613 Sat, 16 Sept

Bucket Truck feet a minute also CLT presses.

Item ID:has 29129

Contact: AUSTIN THE PAUL BUNYAN SHOW Email: Austin@lumbermensco.com Phone: 888-401-6367 703 OR8931-797-8029 Fri, 6 OctEXT - Sun, Oct

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

10 hours this machine since it Sun 4 on Bolster Log Trailer

Selma, North Carolina Contact: TED Email: Teds@lumbermensco.com www.midatlantic-logging-biomass­ Phone: 888-401-6367 EXT 701 or (801)expo.com/ 319-9351

Item ID: 761 Lexington, Kentucky 2006 modelhttp://www.kfia.org/ with Mack 410Hp engine, Eaton fuller 10 speed transmission, 44k reads on camelback suspension, KentuckyWoodExpo.aspx 744,000 frame Miles. Brand new tires! Road ready!

j@lumbermens.co Contact: JOE Email: Joe@lumbermensco.com DESIGN DIRECTOR Phone: 888-401-6367 EXT 709 Donna Heninger

801-362-2170

Danckaert Band Resaw - Roughly

** INFO LINK**

is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts International 4300130 Item ID 13876.4300 Austin 2005 international dd466x703 less than

73000 miles, all new hoses, new bearings, $10k recently

Sinto & the W engine 125 Band with receipts Mill to prove all work, altech rebuilt the boom(23k Job) Call for more pictures!

Caterpillar generator - Low hours Contact: MARK on the mill, electronic computer Set Email: Mark@lumbermensco.com Phone:1/2" 888-401-6367 works,1 or 2" band,EXT 22ft.708 track

702-875-2703 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

94’ Mack with Prentice 120 Sam x702 Item ID: 14215

CARRIAGES & DRIVES

B. H. Payne .............................. 16

Contact:2010 AUSTIN Cardinal HD Carriage Email: Austin@lumbermensco.com (Sawmill) - Cardinal Phone: Carriages 888-401-6367 EXT 703 Carriage line it includes carriage M&F Gauge ............................. 28 with onboard log turners, carriage Meadows Mill, Inc. ................ 33 drive, hyd pac for carriage,

Baker ...................................... 5, 7

Menominee Saw ..................... 29

Kenworth Road Tractor Truck Bell's Machining .....................

27

sawyers cab, computer controls,

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Midwest Sharpening.............. 26

carriage knees, husk including

B & B Mfg. ............................... 18

Item ID: 14092 Brute Force Mfg. ..................... 31 Contact: AUSTIN Buck Austin@lumbermensco.com Equipment (AIM) ........ 36 Email: Phone: 888-401-6367 EXT 703 Corley Mfg .............................. 32

Morbark ..................................... 9

CRD Metalworks .................... 25

Multitek ...................................

12 2009 Mack Truck & Trailers Item ID: 74618 Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper ............................ either a Rosa log rack or storm debris box. 40 Serco

CW Mill-Hogzilla ................... 15

light bar; length bed............................ to takes 244" and to back20 285" Row Electric Will separate truck and trailer. 300,000 miles, 10,000

Dyna Products ........................ 35

Sawmill Exchange .................. 11

18 speed. All new tires and brakes. Versitle with 7500 Loader. Rear tires 11R 22.5 (95%). Log rack; hours. This is ready to go.

Empire Hydraulics ................... 8

Contact: TED Email: Teds@lumbermensco.com Select .........................

19 Phone:Sawmill 888-401-6367 EXT 701

Great Lakes MfgLog . ....................

Kenworth Truck 34

Smith Sawmill ........................... 4

or (801) 319-9351

Item ID: 4849 Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

1990 model Boiler with 300,000 original miles. Has 444 CumHurst .............................

14 mins engine, 15 speed transmission, 46 rears. Recently had new head, pistons, rings, and New steer tires inIron Bull ................................... 21 stalled. Can be sold with or without a Pitts log trailer.

Thomas Industrial Controls..... 10

Kilgore Saw ............................. 22 Contact: AUSTIN Email: Austin@lumbermensco.com Lignomat .................................

Phone: 888-401-6367 EXT 70324

931-797-8029

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

48" bottom saw and 36" top saw

STACKING RAC 75” Fulghum Chipper Item ID: 41386

75” 8 knife chipper 300HP motor, everything is in good working condition, hydraulic unit built in.

Call for more pictures!

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

Mack Log Truck

Item ID: 14087 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Universal Refiner ...................Email: 23 Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net WoodMizer ................................ l 800.S48.6914 I S73.663.7711

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 37

M I S C E L L A N E O U S

Morris WoodsTRAILER 25' LOG PUP 4 BUNKS

MID-ATLANTIC

LOGGING & BIOMASS EXPO

BANDMILLS & HEADSAWS

machine, with air strain conveyers

Inline 6 CAT 200 KW

PUBLISHER

ADVERTISING SALES

pictures

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

“Precision Under Pressure”

A D D I R EC TO RY

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Air Systems Mfg,...........................13..........................828-757-3500 Anson...............................................7.............................800-663-7723 B & B Mfg.......................................12...........................800-654-5320 B. H. Payne.....................................15..........................404-761-8711

Barko 180B Baker................................................1, ‘93 6........................800-548-6914 ‘16 Halverson H140 Item ID: 14077 Bell's Machining............................10..........................888-995-1965 Contact: Austin Skidsteer (DEMO) Blockbuster Inc..............................11..........................888-775-4883 Ph: (888) 401-6367 x703 Item ID: JW-909632 Buck Equipment (AIM).................15...........................800-803-3365 Contact: J Williams Corley Mfg.401-6367 .....................................14...........................

423-698-0284 Ph: (888) x701 CRD Metalworks...........................9.............................888-667-8580 CW Mill, DynaHog........................4.............................800-743-3491 F&R Mfg..........................................19..........................800-355-1250 Great Lakes Mfg............................14...........................877-248-5677 Hurst Boiler....................................40...........................877-774-8778

‘95 John Deere C6 Tree Farmer

James G. Murphy Co....................39..........................800-426-3008 Kilgore Saw.....................................13...........................888-857-5153 Item ID: 13920 Klug 800-471-5060 Contact: Austin ‘13 Korners..................................15...........................

KMC 2500 Track Ph: (888) 401-6367 x703 Lignomat.........................................11..........................800-227-2105

Skidder

LM Equipment Item ID: 14078Co. Ltd.................2.............................604-576-0088 Contact: Austin Menominee Saw............................15...........................

00-582-0470 capacity!. Item ID 813421.

Sam x702 Ph: (888) 401-6367 x703 Metal Detectors Inc......................14..........................541-345-7454

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

BARKO

,-soo-211-94&8

1994 Barko 160B - 2Electric Midwest Sharpening ...................13...........................

31-924-5953

knuckleboom, 30' 8 boom, 75hp off onto a Automation, conveyor. This Inc. is a very Pantron ...........38...........................

00-211-9468

motor, Rotobec continuous well builtSaw processor.

Item ID 13820.

Piper’s Shop...........................8.............................800-845-6075 Sam x702

grapple, 5,000 original hours.

Profile Technology........................3.............................800-369-4242

Firewood Processor - This is

(excellent condition.). Item ID

Row Electric....................................13...........................800-248-4479

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 385

13238. Chris x700

Saw Control. ...................................6...........................

1995 Barko 775 Bsawcontrol.com Feller Buncher automatice firewood processor Select Sawmill Co..........................11, 14....................866-724-7600 - Pumps recently redone. 400 hrs with John Deere power unit with on injection pump. always started low hours. Control panel includes Woodlandia....................................17..........................877-508-8777 tach, oil pressure, water temp and PLEASE PRINT

amp gauges. Cuts logs up to 16”.

good. in good working order. 22in

JUNE 2019

kohing head. head works great.

If you need to Change your Address or

Item ID 13185. Sam x702then OneAdd owner Your and comes with all to our Name mailing list, 1999 Barko 160D new engine manuals and receipts.

Purchased please complete this form and mail to: with new for $32,500. Item ID 13865.

approximately 1500 hours. Hour

- Small manufacturer in PA has

Lumbermens™ Magazine dont work. The last 2 owners Sam x702 P.O. Boxmeter 1916 have only used it to load trucks or LOGGING EQUIPMENT Columbia, TN 38402

Handles logs up to 32”. Uses

❑ Bandit Please ❑ Disc Please Change Please Remove delimber,❑ grapple has been rebuilt.

1999 1900Add Tracked

Best Value Portable Log Splitter made the best valued log splitter.

13HP Honda motor. Manual start

• Through-beam range u1p to 230 feet vans and produce 6 - 8 loads per but electronic option is available.

• Waterproof -Has IP67 rated day. Item ID 13882. Austin x703 Log Lift. Uses 4-way wedge Not affected adjustable by vibration EDGERS &• GANGS to single two way. Great • 60k LUX Immunity toPA.sunlight Brewco Saws - Two Brewco Saws Value!

Item ID 12062. Sam x702 in excellent condition. Runs great.

a Chomper Model 16 PDA

Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

BANDIT

as a backup as needed. Has a CTR

*Company name and address process have your change.

Boomto cylinders minor leaks.

Chipper - Cat Under Carriage at required Company Name*:_ Item ID 13694. Sam x702 50% or better.

475________________________________________________________ hp Cummins

94 Barko 275 - Excellent value Diesel.

7500 Hours. One owner.

Individual Name:__________________________________________________________ with low at hours at 3,500. 5.9 Well maintained.

Item ID 13294.

Address:_ ________________________________________________________________ Sam x702

CUMMINS continuous grapple.

_______________________________________________________________________

2004 Bandit Beast Model 4680 -

Runs Great!. Item ID 13740. Sam

City:____________________________________________________________________

3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

x702

BELL

State:___________________________________________________________________

Zip:__condition. ___________________________________________________________________ 1990 Bell Super T - This Bell has good Just finished 10

Phone:__________________________________________________________________ a brand new Duetz engine. Lever Acre clearing job, ready to work!

control, 33” bar, pump and tranny Remote control. Big production Email:___________________________________________________________________

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 39

LUMBERMENS™ MAGAZINE Post Office Box 1916 Manufacturing a full line of biomass fired Columbia, Tennessee 38402 combustion systems backed with fifty years of innovative clean-burn design. Diverse in every way with multi-fuel blending capability. Hurst stokers utilize hundreds of common and abundant solid biomass fuels.

Large or small scale, project management is eased with the impressively short installation time required with prefabricated Innovative modular components.

Clean-Burn Design

PRSRT STD. U.S. Postage PAID Permit No. 212 Pulaski, TN

Innovative

Clean-Burn Design Manufacturing a full line of biomass fired Manufacturing a full linecombustion of biomass fired systems backed with fifty years of combustion systems backedinnovative with fifty years of clean-burn design. Diverse in every innovative clean-burn design. Diverse in every Manufacturing a full line of biomass fired way with wayRotary with multi-fuel blending capability.

Hurstmulti-fuel blending capability. Hurst Dryers Manufacturing a full linestokers of biomass fired of common and utilize hundreds combustion systemsofbacked fifty years stokers utilize hundreds and Sand combustion systems backed with fiftyDryers years ofsolid biomass fuels.

Manufacturing acommon full linewith of biomass firedof abundant abundant solid biomass fuels. or small scale, project Grain Dryers innovative clean-burn design. Diverse inLarge every innovative clean-burn Diverse in every combustion systems design. backed with fifty years of management is eased with the Large or small scale, project way with multi-fuel blendingLumber capability.Kilns Hurst impressively short installationway time with multi-fuel blending capability.

Hurst innovative clean-burn design. Diverse in every stokers utilize hundredsCement of common and with prefabricated Kilns management is eased with the required way with multi-fuel blendingtime capability.

Hurst abundant solid biomass fuels. stokers utilize hundreds of common and Brick Kilns modular components. impressively short installation Large or small scale, project stokers utilize common fuels. and abundant solidofbiomass required withhundreds prefabricated management is eased with the abundant fuels. modular components. impressively short installation time Large or solid smallbiomass scale, project

Innovative

Large or small scale, project management is eased with the management is eased with the impressively installationtime time impressivelyshort short installation required prefabricated required with with prefabricated Innovative modular components. modular components.

Clean-Burn Design

required with prefabricated

Clean-Burn Design modular components.

Rotary Dryers Sand Dryers Grain Dryers Lumber Kilns Cement Kilns Brick Kilns

50

Rotary Dryers Rotary Dryers Sand Dryers Sand Dryers Grain Dryers Grain Dryers Kilns Lumber Kilns Manufacturing a full line of biomass fiLumber red Cement Kilns systems backed with fifty years Cement Kilns combustion of Brick Kilns innovative clean-burn design. Diverse in everyBrick Kilns way with multi-fuel blending capability. Hurst stokers utilize hundreds of common and abundant solid biomass fuels.

Large or small scale, project management is eased with the impressively short installation time required with prefabricated modular components.

Rotary Dryers Sand Dryers Grain Dryers

50 YEARS

Rotary Dryers Rotary Dryers Sand Dryers Grain Dryers Sand Dryers Lumber Kilns Grain Dryers Cement Kilns Lumber Kilns Brick Kilns

Cement Kilns Brick Kilns

YEARS

50 YEARS