The Lumberman's Exchange brought to you by LBXonline.com

May 2012

Since 1986 - The Original (800) 315-9950 or (615) 349-1890

/RJJHUV ‡ 6DZPLOOV ‡ 3DOOHW 0DQXIDFWXUHUV ‡ :RRG 5HF\FOLQJ (TXLSPHQW

DEALS OF THE MONTH '99 CAT 517 GRAPPLE DOZER

N IMPROVED DESIG At d Being Introduce Expo Richmond, May 18th & 19th, 2012!

Baker Double Notcher

(original design pictured)

Clean! Working today!

Item ID: 12463 Contact: Tom Ph: 800-315-9950 x604

ororThat ThatAllAllToo-Familiar Too-Familiar Toolbox ?

Baker Single Notcher

'88 MORBARK 27 RXL WHOLE TREE CHIPPER

See us outside at Booths N-4 & N-5

Baker Bantam Notcher

MOTIVATED SELLER! Item ID: 12519 Contact: Daren/Michelle Ph: 800-315-9950 x603

For classifieds call (800) 315-9950 or (615) 349-1890 or Ó With your smart phone: Scan QR Code to visit—

WWW.LBXONLINE.COM

aaProductive, Productive, LowMaintenance Maintenance

Baker Notcher is just right for your pallet mill, because you have a choice of three top-notch models. One of them will fit your production perfectly.

Choosing the right notcher is important, because you don’t want to invest in something that will end up falling short of your production requirements.

Choose the new and improved Double Notcher for the highest over 4,000 stringers per hour situations, you should choose the Baker Single Notcher,

rated at about 750 notched notched stringers stringers per per hour. hour.

It can It can chamfer too withwith its removable its removable chamfer chamfer attachment. attachment.

Lastly, check out the compact, economical Baker Baker (single-head) withwith its modest its modest Bantam Notcher (single-head) 400-stringers-per-hour production 400-stringers-per-hour production raterate andand Whichever Baker Notcher youyou invest invest in, in, to fix another breakdown! Contact Bak-Baker Products Baker Double Notcher!

0/ "OX m %LLINGTON m -ISSOURI m m 5 3 !

E-AIL INFO BAKERPRODUCTS NET 0HONE m &AX

www.logtolumber.com www.logtolumber.com Your Log To Lumber Leader Since 1988 (800) (800) 548-6914 548-6914 Your Log To Lumber Leader Since 1988 (800) (800) 548-6914 548-6914 www.logtolumber.com www.logtolumber.com

&"" $% && $ $ & && $% &"" $## %! %! ##!! # ## #! &"" $% && $ $ & && $% &"" $## %! %! ##!! # ## #!

!"" #$ % &%

PALLET STOCK, STUDS, I-JOISTS, STRUCTURAL COMPONENTS THE L-M SAWS, WILL TAKE YOU TO THE NEXT LEVEL!

/HDGLQJ WKH LQGXVWU\ LQ EXQGOH FURVV FXW V\VWHPV VLQFH 1HZ 'HVLJQ 1HZ 7HFKQRORJ\

Portable Yard Saw Model 200MP-7-SS Gas Model 100MP-7-SS Electric 3 inch side shift, a standard feature

Traveling Arch Saw Hydraulically controlled No manual cutting Our most popular turn key system

The New L-M “I-CUT ” Bundle cross cut system! * 60 ’ long frame to precision cut your I-Joists * Precision accuracy of +- 1/32 ” * Shorter system are available to process all your cutting needs * Tremendous labor savings, Guaranteed!

L-M Deck Cut Off Saw 3 foot to 12 foot bar lengths Hydraulically controlled

Automatic Strapping System Attach bottom crossers Side squeeze incorporated Polyester strap

Flush End Bump Rollcase Reduce or eliminate your end trims

The Verticut P4 System now offers scan and cut technology, reducing operator error by using a bar code system!

9LVLW RXU ZHE VLWH ZZZ /06DZV FRP WR VHH RXU FRPSOHWH SURGXFW OLQH DQG YLGHRV

L-M Equipment Co. Ltd Phone: 604-431-8800 Toll Free: 1-800-455-8807 Web Site: www.LMSaws.com E-Mail: Sales@LMSaws.com For Classifieds Call Your LBX REP at 1-800-315-9950

May 2012 3

www.logmax.com HEADS ABOVE THE COMPETITION

TAKE CONTROL!

LOG MATE 500, THE USER FRIENDLY CONTROL SYSTEM READY TO MEET THE FUTURE OF LOGGING The requirements of the forest industry are constantly increasing.

To meet the required production levels and reports a solid control system is a must-have. The all new Log Mate 500 brings you the future of logging at your fingertips. Built out of rugged and solid hardware in combination with an easy to use interface, this system will give you the best conditions for success!

Western Canada 1.800.666.4474 - Eastern Canada 506.869.2325 - U.S.A. 360.699.7300

Original

5IF

-6.#&3."/Âľ4 &9$)"/(& Your #1 Source for Forest Industry Products!

The Lumberman’s Exchange is published monthly and is circulated internationally to sawmills, loggers, pallet makers, recyclers and industrial woodworking plants.

PUBLISHER Woods Publishing ADVERTISING SALES Morris Woods (615) 349-1890 morris@LBXonline.com DESIGN DIRECTOR Heninger & Associates lbxonline@comcast.net EQUIPMENT REPS Equipment Representative Daren Bodine (800) 315-9950 x603 Equipment Representative Tom Hirt (800) 315-9950 x604 MAILING ADDRESS P.O. Box 1916 Columbia, TN 38402-1916 (615) 349-1890 Phone (931) 233-0802 Fax AD SUBMISSIONS May be sent to— LBXonline@comcast.net POSTMASTER Send address changes to: Lumberman’s Exchange P.O. Box 1916 Columbia, TN 38402 The Original Lumberman’s Exchange is published monthly

by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers the Lumberman’s Exchange, its principles and associates are not held liable for errors or omissions. Reproduction in whole or part prohibited with-out written consent. Š2011 by Woods Publishing.

CALENDARShow ** The**Richmond EXPO RICHMOND 2012 EXPO RICHMOND 2012 Richmond * Richmond, Virginia See page 38Raceway Complex Coming May Friday May 18 and Saturday May18–19, 19, 20122012 9:00a.m. until 5:00p.m.

Richmond, Virginia

** Auctions **

TEITSWORTH — Page 9 Sawmill and Logging Equipment Exposition The 33 East Coast rd

0&4+4%$+2'%24" )% 02' 020##4&40$& 2 2*$ 2 )%#4'*1434' 2 2%# www.teitsworth.com % )2% 0)*'4%$ 22 %$,'2"4++2' 4+2% %)' $4' 2'%24$ 0+'24$2 % )

54332 102 /.-/,+2 3*)(0+'2 &%330&'4%$2 %#2 +*5"433!2 3%((4$(!

14%"*++!2 *330'2 *$ 2 )03*'0 2 "*$ #*&' )4$(2 0 4 "0$'! + 340+2*$ 2+0) 4&0+24$2' 02 *+'0)$2 $4'0 2 '*'0+ 2 0*)3 ..20 414'4$(2&%" *$40+2*$ 2' % +*$ +2%#2#%)0+'2 )% &'+ 4$ +') 2 0% 30254332&%$ 0$02#%)2' 02 ) 2 4& "%$ 2 %5 02$050+'2*$ 2"%+'2* *$&0 2"*& 4$0) !20 4 "0$'2*$ '0& $%3%( 24$2' 024$ +') 254332102%$2 4+ 3* 2 0)025433210 *&)0+2 %#2 *&'4 02 *$ + %$2 "*& 4$0) 2 *$ 2 0 4 "0$' 0"%$+')*'4%$+2% '+4 0!2 3 +2 $ )0 +2%#24$ %%)2 4+ 3* +2%# $052 )% &'+!2"0' % +!2'0& $%3%( 2*$ 2')0$ + 2 *"4$02*$

&%" *)02 )% &'+2%)2+0) 4&0+210#%)02"* 4$(2 % )2 )& *+4$(

103%52 '%2 ' 02 0 %+4'4%$2 %##4&02 1 2 )432 !2 /.-/ SAWMILL CONSOLIDATION AUCTION

%$#4)"*'4%$+254332102"*430 2'%2*332 )0 )0(4+'0)0 24$ 4 4 *3+ $%23*'0)2' *$2 * 2 !2/.-/ 22There is no charge to attend the Satur`>ÞÊU Ă•Â˜iʙÊU棊\ääÊ>°“° exposition if you pre-register; there will be a $10.00 charge # ' )0 22 30*+02#4332% '2*$ 2)0' )$2' 02 )0 )0(4+')*'4%$2#%)"

for those who register on-site.2 2 %)2 # )' 0)2 4$#%)"*'4%$!

Sherburne, New York 30*+02&*332 . 2 / Co-sponsored by Virginia Polytechnic Institute & State University Cooperative Extension and Virginia Forest Products Association

EXPO RICHMOND 2012 -Ê °Ê 1,* 9ÊpÊPage 10

www.murphyauction.com

Return by April 9, 2012 to: EXPO RICHMOND 2012 P. O. Box 160 Sandston, VA 23150-0160

Your Name: Company: Address: City:

Nickname: PENINSULA PLYWOOD GROUP Title: Thurs`>ÞÊU Ă•Â˜iÊÇÊUʙ\ääÊ>°“° ZIP: Port Angeles,State: Washington

Telephone:

FAX:

"Ê 1 / " Ê "°ÊpÊ*age 11 PLEASE CHECK ALL CLASSIFICATIONS OF INTEREST: -- (You must check at least one) G Dealer Sales G Paper/Pulp hilcocanada.com; maynards.com; hilcoind.com G Other (Please Specify) : E-mail:

Country (if not USA):

G Sawmilling G Logging G Pallet Production/Recycling G Equipment Manufacturer G Plywood/Panel

Pre-registration allows entrance to the Exposition (May 18 - 19, 2012, 9am-5pm) at no charge. On-site registration is $10.00.

Exhibitors: Please do not use this form. Contact show office for exhibitor registration information.

ST. MARY'S PAPER CORP.—WORLD CLASS PAPER MILL Additional information is available on the Internet at www.exporichmond.com %

!# " !"

7i`°ÊEĂŠ/Â…Ă•Ă€ĂƒÂ°U Ă•Â˜iÊÓäqĂ“ÂŁĂŠU棊\ääÊ>°“° !:39*8742:"8++:'9:/9+1:46:6/9: %71/4*: 80/*571:!82)526: 569+:46: : &: 4'.27.*:!(9&:6/9:14%:'9,529:6/9:9 )5386857&:#/9:65)80:83:

Major 2-Day Website & On-site Auction in Ontario, Canada

& :#514% 3:"551:)251.063:'.387933:83:*529:0/4++97-87-:6/47:9(92:'9,529&:#/9:*42 963:/4(9:0/47-91$:0/47-93:65:'.387933:500.2 ,43692$:471:05*)9686857:83:,89209&:#/83:)25-24*:"8++:,50.3:57:/5":65:*4876487:4:3.364874'+9:'.387933:87:6514% 3:*42 96:'%:)25(8187-:4:'289,:8738-/6:8765:,.6.29 0571868573$:)25(8187-:362469-893:65:87029439:9,,9068(97933:471:05*)96868(97933$:471:291.09:05363&:#/9:05.239:83:1938-791:,52:47%579:87(5+(91:"86/:6/9:5)9246857 471:*474-9*976:5,:4:"551:)251.063:'.387933&:#976468(9:4-9714:870+.193:4:-+8*)39:5,:6/9:,.6.29$:3.))+%:0/487:*474-9*976:.)14693$:1830.33857:5,:+947:3.))+% 0/4873:471:9792-%:34(87-3$:3.364874'8+86%:471:*529&: 52:,.26/92:19648+3:471:,52:29-836246857:87,52*46857$:+*)- &+, '% % (*$,$:0576406:!7-89: 89-9+:46:6/9 9)426*976:5,: 551: 089709:471: 52936: 251.063:46: 82-8784:#90/ :#9+9)/579 : : :,4 : : :9 *48+ :4289-9+ (6&91.:: 569 :!7-89: 89-9+ )25(8193:29-836246857:87,52*46857: :,52:6/9:39*8742: : #:,52:6/9:9 )5386857&:-

** INFO LINK **

Amark .......................................... 7 American Leasing & Financial .. 7 B & B Mfg. ................................. 26 B. H. Payne ................................ 13 Baker ....................................... 1, 6 Bandit Industries ..................... 12 Bartlett Saw Service ................ 39 Bay Equipment ......................... 37 Brewer Eagle ............................. 27 Buck Equipment (AIM) ........... 17

LogMax ........................................ 4 M&F Gauge................................ 17 Machinery Sales Co., Inc. .......... 8 Metal Detectors, Inc. ............... 29 Midwest Sharpening Service .. 19 Multitek ..................................... 16 P&D Johnson .............................. 7 Phase-A-Matic ........................... 21 Piper’s Saw Shop ...................... 30 Resource Recovery.................. 35

Concept Products .................... 28 Cord Master .............................. 20 Corley Mfg................................. 33 CRD Metalworks....................... 24 CW Mill—Hogzilla .................... 32 Dyna Products .......................... 18 Expo Richmond ........................ 38 Hilco Industries ..................... 11 Jackson Lumber Harvester..... 15 James G. Murphy .................. 10 Kasco-SharpTech ....................... 9 Lignomat ................................... 21 Litco ........................................... 13 LM Equipment, Canada ............. 3

Richmond EXPO .................... 38 Rotochopper ............................ 40 Row Electric.............................. 25 Sawmill Exchange .................... 31 Select Sawmill........................... 14 Sering Sawmill .......................... 19 Sharp Tools ............................... 34 Southeastern Metals ................ 14 Suffolk Machinery ...................... 2 Teitsworth Auctioneers .......... 9 Thomas Tire, Commercial ...... 29 US Blades .................................. 36 Weaver Electric ........................ 22 Wood-Mizer ............................... 23

For Classifieds Call Your LBX REP at 1-800-315-9950

FOR CLASSIFIEDS Call 800.315.9950 See pictures, prices, and Location of all equipment at www.LBXonline.com

ARDCO

1992 Ardco Swamp Trencher - Model H-150. SN:1522.

Only 2200 HRS. Very Good Condition. DETROIT 6V71 with 310HP; Eaton heavy duty Hydrostatic Hydraulic Pumps and Motors = Sunstrand Hydraulic Drive = Funk double pump, 2800 series. Three Point Hitch for implement attachment Ditcher is a Dondi model 55 or 75. Enclosed cab with good working AC. Tires = 66 x 68:00 x 25 - 6 ply Super Wide Flotation Tires at 98%.

This machine only offered by Lumberman’s. Fantastic buy if you need to work in wet ground. Used to help drain swamps or work in other soft ground conditions. This machine almost walks on water! Service records and books available from owner.

FOB: GA. - Item ID-12312 - Tom 800-315-9950 x604

BANDIT

2004 Bandit 2400 Track Chipper - Cat Engine, 710 Actual Hours!!! This Machine is not even Broken in yet!!! - Item ID-12518 - Michelle 800-3159950 x603 2010 Bandit 2400 Tracked Disc Chipper - 1433 Hours. 700HP. Very clean unit to make paper quality chips. Tracks allow this chipper to work right of ways or pipelines. Excellent condition. Super value. - Item ID-12501 - Tom 800-315-9950 x604

BARKO

1997 Barko 160C Knuckleboom Loader on Trailer - Nice loader.

Cummins 6 Cyl engine. 8400 hours. Pitts trailer. Standard lever controls. Rotobec 4642 continuous grapple. - Item ID12229 - Tom 800-315-9950 x604 1998 Barko 160D Loader - s/n 22409 6cyl Cummins engine, Lever controls, Continuous rotation grapple. Trailer and delimber are not included Item ID-12207 - Daren 800-3159950 x603 2004 Barko 375A Loader on Rough Terrain Carrier May 2012 „ 5

O^e

Q Please Remove

HiViZ

qÊ *, Êq

'09 DYNAMIC 585 WHOLE TREE CHIPPER

The Model “A” Baker Band Resaw:

One of the All-Time Greats!

CALL US TODAY FOR ALL YOUR USED EQUIPMENT NEEDS!

FREE EQUIPMENT LISTINGS! CALL – (800) 315-9950

st The Mo Band r Popula in the Resaw ld!

Wor

Q Please Change

info@bakerproducts.net Call: (800) 548-6914 www.logtolumber.com

8^in

Incredible Price!

New! Must Sell!

Tom Hirt Phone: 800-315-9950 Ext. 604

E]dcZ

E#D# 7dm &.&+ 8dajbW^V! IC (-)%'

*Company name and address required to process your change.

6YYgZhh

>cY^k^YjVa CVbZ

'98 650G FULL FORESTRY PACKAGE

The Original Lumberman’s Exchange

Company Name*

Item ID: 12400 Contact: Tom Ph: 800-315-9950 x604

If you need to Change your Address or Add Your Name to our mailing list, then please complete this form and mail to:

Q Please Add

DEALS OF MONTH FROM

EQUIPMENT REPRESENTATIVES

with CSI 4400 Slasher - Very seldom does a loader like this come to the used machine market place. Less than 900 hours. Barko Magnum Series with CSI DM4400 Sawbuck.

32’ reach. Cummins 173HP engine. 4642 Rotobec Grapple.

Mounted on a Pitts 39’ Trailer.

Save thousands over new!

- Item ID-12352 - Tom 800-3159950 x604 Barko Knuckleboom - 2006, Model 495 Trailer Mounted, 3800 Hours, FEC Log Pro Buck Saw Included . Like new one owner machine! - Item ID-12153 - Chris 800-315-9950 x600

BELL

Item ID: 12488 Contact: Daren Ph: 800-315-9950 x603

Daren Bodine Phone: 800-315-9950 Ext. 603

For classifieds call (800) 315-9950 or (615) 349-1890 or

2004 Barko 395 on SP Carrier - Very Clean Machine. 8800 hours. Mounted on Big John Self Propelled Carrier. JD 6.9 Powertech Engine. Rotobec 4547 Grapple. 35’ Reach with heel bar. Comfort Cab with Heat/AC/Stereo. Nice yard machine. - Item ID-12278 - Tom 800-315-9950 x604 2006 Barko 595 CRL Loader 40’ Live Heel for high stacking.

8555 well maintained hours. JD 6068T engine. Rotobec 4048HD Grapple. Undercarriage at 60%.

Hyd tilt cab. Work ready! Good condition. - Item ID-12405 Tom 800-315-9950 x604 2010 Barko 295ML Magnum

Ó

With your smart phone: Scan QR Code to visit—

WWW.LBXONLINE.COM Mounted on rough terrain carrier. 40’ boom, hydraulic tilt cab, engine covers are hyd raised & lowered. 7209 hours.

Rotobec continuous grapple.

Very nice machine. - Item ID12380 - Tom 800-315-9950 x604

6 The Original Lumberman’s Exchange

1995 Bell Super T - Dangle Head bar Saw. 28L Tires at 60%. Engine has issues and does not run. All components are there. Parts machine, or one to fix up and use. Priced cheap! Serial Number BCH3660 - Item ID-12470 - Tom 800-3159950 x604 1999 BELL TF120B Feller Bunchers - one owner machine, it is on D5 cat tracks, Hours not known; meter not working. Price : 60,000.00 USD - Item ID-11480 - Daren 800-3159950 x603

CASE

2007 Case 1150K Dozer - 2565 Hours on very strong dozer.

Case 130HP engine. Open ROPS cab. 24” pads; Rock Guards; Canopy Brush Guard; Hydraulic PTO; Runs strong and priced to sell. - Item ID12348 - Tom 800-315-9950 x604

CATERPILLAR

1961 Caterpillar 944 Wheel Loader - Tire, Brakes, Bucket all are in good shape, Machine

Visit us online at www.LBXonline.com!

Jake Hebenstreit Finance Consultant

FINANCE YOUR EQUIPMENT PURCHASE TODAY

Morbark Model P-S Post Peeler Good Condition, S/N #368; As is: $9200, F.O.B. Lewiston, Idaho

(208) 743-5501 is Ready to work Serial #43A1589 - Item ID-12156 Daren 800-315-9950 x603 1983 Caterpillar 988B Loader with very low hours Caterpillar 3408T Engine, s/n# 50W06423 T246 988B, It has a Rayco Bucket that is 11’6” wide x 5’ tall (8 yard bucket).

- Item ID-12375 - Daren 800-3159950 x603 1987 Cat 988 Loader with Forks - 27,000 hours. Fair Condition. Big capacity. - Item ID-12186 - Tom 800-315-9950

Now Accepting Visa & Mastercard

(800) 644-1182 (503) 679-7370 Cell

x604 2000 Cat 550 Harvester w/ Log Max 840 Head - Very nice harvester with 6500 hours on machine, but only 3500 on 1997 Log Max 840 Processing Head. Cat 3126 engine w/180HP. Tires and Chains at 75%. Unit comes with spare squirt boom and many spare parts for processing head. s/n available on request. - Item ID-

No Down Payment on Most Transactions Application Only up to $100,000 Programs in “All Fifty States” Loans and Leases Available Same Day Approvals—Next Day Funding

Email: jake@americanlf.com Website: www.americanlf.com 12349 - Tom 800-315-9950 x604 2006 Cat M318 MH - Totally refurbished with 30 day warranty. Gone through from end to end by professional rebuild factory. Hydraulic elevated cab for great visibility. 38’ reach. Logging grapple included. Fantastic Yard Machine. FOB: Baltimore - Item ID-12520 - Tom 800-3159950 x604

2007 Cat 325D w 624 Waratah Processing Head - 7800 hours.

Very clean machine. Head updated. Unit is working today. 34” Triple Grouser Pads.

Great landing machine. - Item ID-12283 - Tom 800-315-9950 x604 Caterpillar D4H Dozer 1903 Hours - THIS WAS SOLD!! NO LONGER AVAILABLE. 1993, Cat Model D4H XL, S/N 8J00374,

Save Your Stubs & Pieces!

¦

Let us reprocess them $25 per 100 Now have Factory Seconds $25 per 100 sticks

For Classifieds Call Your LBX REP at 1-800-315-9950

May 2012 7

WE ARE OVERSTOCKED! PRICES REDUCED! TAKE ADVANTAGE OF THIS CHANCE TO SAVE BIG! 9802 North Vancouver Way Portland, Oregon 97217

7Â…iÂ˜ĂŠ >Â?Â?ˆ˜}ĂŠ ĂƒÂŽĂŠvÂœĂ€ĂŠ iÂŤĂŒĂŠ 8ĂŠUʓ>VÂ…Ăƒ>Â?iĂƒJÂ“ĂƒÂ˜Â°Vœ“

0H s &AX 7", ½-Ê , -/Ê 6 /",9 New & Used Sawmill & Planing Mill Equipment

#OASTAL +NIFE .ARROW ,BR 0LANER

3TETSON 2OSS X 4IMBER 3IZER

4YRONE "ERRY 3-! #ARRIAGE $RIVE

BANDMILLS & HEADRIGS Kockums 6’ Air Strain Bandmill L&B 6’ Air Strain Twins McDonough 62� Twin Air Strain Mebor Horizontal Bandmill Salem 6’ Air Strain Bandmill Salem 5’ Air Strain Bandmill CARRIAGES & DRIVES Corley 40� Hydraulic 3-Block Salem 24� 3-Block Linear Carriage Salem 42� 4-Block Carriage Salem 60� 4-Block Carriage Salem Linear 36" 2-Block Tyrone 240 Hydraulic Drive USNR 2000, 42" Stud Carriage CHIPPERS & SCREENS Arasmith Lilly Pad Chipper BM&M 5’X14’ Screen BM&M Chip Classifier CM&E 36� Rechipper Kockums 66� Horiz. Feed Precision 8x8 Screen Precision 38� Horizontal Feed Precision 48� 8-Knife Drop F. Precision 48� Horizontal F. Precision 58� Horizontal Feed Precision 66" Horizontal F. Precision 96� Whole Log Precision 118� HFBD Chipper Rotex 6’X16’ Screen West Salem 58� Horizontal Feed DEBARKERS Nicholson 22� A-5 Debarker EDGERS, GANGS & RIPSAWS Globe Panel Ripsaw

OVER 13 ACRES

OF

Globe Strip Saw Kimwood Short Block Ripsaw Mereen-Johnson 48� Ripsaw Paul Gang Ripsaw Raimann/Weinig KR450M Ripsaw System Salem Late Model Combination Edger FILING ROOM EQUIPMENT Armstrong 3-10C Stretcher Roll Armstrong Dual Side Grinder Armstrong No. 4 B.S. Stretcher Roll Armstrong No. 4 LH B.S. Grinder Armstrong No. 4 RH B.S. Grinder Armstrong No. 25 Circle Armstrong No. 90 Equalizer Gockel 163� Mag Bed Grinder Hanchett 84� Challenger Grinder Hanchett DN-40 Knife Grinder Hanchett Knife Grinders (10) Hanchett VR120 Mag Bed Newman G-200 Grinders Vollmer Cana E (8) Vollmer CH210 Auto Sharpeners (2) Weinig R 934 Profile Grinder Wright Mod. 1801 (3) Wright W-1600 Auto Tipper HOGS & PULVERIZERS Gruendler 50XE Hammer Hog Jacobson Hammer Mill Jeffrey 36 x 60 Shredder Jeffrey 76WBH Horiz. Hog West Salem 38� Horizontal West Salem Big Brute Grinder Williams 30KS Hammer Hog MISCELLANEOUS 5-Arm Hyd. Tilt Hoist 10’ Hydraulic Lumber Stacker CEMCO Combination Planer/Sander Fruilmac End Matcher Hurricane 28� Chop Saw Industrial 3496 Finger Jointer Industrial FJS-25 Finger J. System

Irvington 20’ Trimmer, 1’ Saws L&M Log Cut-Off Saws Lumber Stackers (2) Peerless 24-Unit Bins (2) Producto Dog Ear Machine Tektronix Log Metal Detector Timesaver Sanders (6) PALLET EQUIPMENT Bronco 2006 Pallet Nailer Pallet Repair Systems Nailer Smetco Pallet Turner PLANERS & MOULDERS Buss 55 Double Surfacer Buss 88 Double Surfacer CEMCO Planer/Sanders (2) Coastal 16-Knife 9� Planer Pkg. Coastal 24� 20-knife Planer Diehl 6-head TF Moulder Mattison 226 12� Moulder Mattison 228 16� Moulder Newman 382 Double Surfacer Newman M712 12-Knife Northfield Double Surfacer S-R 6-14-D1 24� 16-Knife S-R Chip Blankers S-R 6-10-A1 10-Knife Stetson-Ross Timber Sizer Wadkin 6-Head Moulder Weining 22A 5-Head Weinig 22B Complete Line Weinig U22A, 6-head Weiniig P22N 5-Head Yates-A-63 16-Knife Planer Pkg. RESAWS 36� Tri-State Tilting Resaw Kockums 6’ Horiz. Twin Air Strain McDonough 54� Twin Horizontal Salem 5’ Air Strain Horizontal Salem 6’ Horiz. Air Strain Smith Twin Horizontal Resaw Turner 52� Rollfeed Resaw

7 ĂŠ , ĂŠ* ,/ ĂŠ"1/

Woods Planers 412M, 414M, 407M, 409M. 415M Woods Moulder 132M Yates Planers A-20, A-62, A-66 Stetson-Ross Planers 6-12-A1, 6-12-C1, 6-10-A1, 6-14-D1 Mattison Moulders 276, 226, 228 SAVE BIG ON MOTORS AND MAJOR PARTS!

GREAT BUYS ON USED EQUIPMENT!

For complete equipment list, visit our website:

ĂœĂœĂœÂ°Â“>V…ˆ˜iĂ€ĂžĂƒ>Â?iĂƒÂ°Vœ“

OR CALL AND ASK FOR DEPT. LX

(866) 241-2977

8 „ The Original Lumberman’s Exchange

Visit us online at www.LBXonline.com!

LOK-N-LOGS SAWMILL CONSOLIDATION AUCTION

3ATURDAY s *UNE s A M &%)+ 8in# GY '( ™ H]ZgWjgcZ! CZl Ndg` NOTICE UÊ Jim Webb, company owner, to better utilize labor and space decided to Consolidate 2 Operations into 1.

UĂŠ Much of this equipment was purchased new and has low hours of running time.

UÊ Below is a "brief list" of items to be sold. ,OG ON TO www.teitsworth.com FOR MORE DETAILS SAWMILL EQUIPMENT UÊ HMC MM10 sawmill 4 block, 60hp electric in feed, out feed, turner, 50� blades UÊ IR 25hp compressor- Like new UÊ Yates American 820-12 planer UÊ (2) break down hoists UÊ Golden Eagle 3 band saw UÊ Morebark 414 post peeler UÊ Roto Chopper Mulch maker horizontal grinder E200 w/300hp electric power UÊ 24x80 Radial stacking conveyor UÊ 26x40’ and 26 by 20’ paddle chain conveyors UÊ Stump Grinder UÊ Edger UÊ Several roll cases, 3&4 strand log decks, log turners, conveyors, barn cleaners and more.

TRUCK SHOP & ROLLING STOCK UÊ Mohawk 25,000 lb truck lift UÊ Portable welder UÊ Pallet Racking- cantilever racking UÊ Dust tower & Air handling system UÊ Shop tools & equipment UÊ Dorsey walking floor trailer UÊ Caterpillar 924G loader w/bucket & forks UÊ Caterpillar 267 track skid steer loader w/bucket & forks UÊ Grove 60’ manlift UÊ 2004 Mack Log truck & trailer UÊ Much more‌

1903 Hours, PAT Blade, Laser Attachment, Winch, Cat 3304 Engine. Excellent Condition!

- Item ID-12177 - Chris 800-3159950 x600 Caterpillar Dozer Model D4E with winch - 3304 caterpillar engine, power shift, 50,000 lb winch - Item ID-12369 - Daren 800-315-9950 x603 Caterpillar Excavator Model 235 - 1239 hours, 3306 Caterpillar engine, hydraulic thumb - Item ID-12371 - Daren 800-315-9950 x603

225 LC

Caterpillar 225LC Shear Excavator - 4226 hours, Undecarriage is in GOOD Condition, Machine is WOODS ready. - Item ID-12517 Michelle 800-315-9950 x603

330’S

2003 CAT 330 Log Loader -

13,750 hrs. new u/c less rolls nice tight and clean log loader.

Located near Portland OR; 38’ Live Heel boom; Forestry package on cab. 40� cab riser with tilt for transport. AC/Heat work good. Very nice yard machine. - Item ID-12478 - Tom 800-315-9950 x604

517GR

1999 Cat 517 Grapple Dozer Fully enclosed cab with heat and air. 90% undercarriage with new sprockets, chains, rails, and rollers. Only needs pads or grousers. 8485 hours.

Esco grapple is dry and tight.

Owner just had engine rebuilt with new head, new rings, new bearings, new oil pump, new gaskets, new fly wheel ring gear,. Very nice running machine. AC just repaired.

- Item ID-12463 - Tom 800-315-

OWNER LOK–N–LOGS TERMS Full payment auction day, cash, check, MC/Visa. 2% buyer’s fee waived for payment with cash or check. 10% buyer’s fee for items under $1,000.

Roy Teitsworth, Inc. AUCTIONEERS 9950 x604

518

Cat 518 Grapple/winch Skidder - Late 80’s 4WD Drive; Cat winch, maintained machine.; 30.5 x 32 Tires, 95% rubber.

130-hp, all pins are good. - Item ID-12202 - Daren 800-315-9950 x603

For Classifieds Call Your LBX REP at 1-800-315-9950

518C

(585) 243-1563

*-* ')("((&& ;Vm +*%' 7VgWZg =^aa GdVY <ZcZhXd! CZl Ndg` &))*) 1995 Caterpillar 518C Grapple Skidder - This machine is clean and is ready to go to work. Over $12,000 worth of work has been done to this machine(All workorders can be e-mailed). All belly pans and sheet metal were removed for steam cleaning. We have rebuilt the hinge pins and the May 2012 Â&#x201E; 9

PUBLIC AUCTION

3(1,168/$ 3/<:22' *5283 )RUPHUO\ . 3O\ ,QF

"* 61./$"4 1+% 5 .%2(%3 !%$+%/$"4 1+%

".(+% .(2% ,.0 +&%)%/ !

FHH L X EN '0''4 #6*'5Y 74#0& #76' L 16#4; .+22'4Y 74#0& #76' Hg$+0 761 '0''4 6#%-'4Y EIN Gg&'%- '0''4 4#; ;56'/Y jGk 114' Ig64#; 6'#/ 4;'45Y jFk .1$' INNN .$ *;&4#7.+% 4'g 4'55'5Y +..+#/5 n *+6'X #/$ FHg12'0+0)X 5)11& ELg12'0+0) 16 4'55'5Y #5*+/161 EN X H '0''4 1/215'45Y L '0''4 1/215'4Y .1$' EN -+00'4 #9 +0'Y L '%18'4; #9Y +..'4 +0'Y .1$' ':674' +0'Y *+22'45Y .1$' #0) +2 #9Y .1$' '8'. #9Y jJk -11) #6%*+0) #%*+0'5Y +/911& #0&'4Y 4#&+0) 6#6+10Y #0'. 6#%-'4Y +)01&' #%-#)+0) 6#6+10Y jFk +.'; 1) 7'. 6'#/ 1+.'45Y 1/24'55145Y 1) '%-5Y 4#05('45Y 108';145Y +.. .'%64+%5Y #%*+0' *12 37+2/'06 n 11.411/ 37+2/'06Y *+2 %4''05Y 1)Y *+2 +05Y #)*175'5Y jEHk 14-.+(65 61 ENXNNN .$Y 9''2'4Y -+& 6''4 1#&'4Y +%-725Y 7/2 47%-Y 7%*X 7%* 14'^

$KF NKXG QT DKF QPNKPG YKVJ MurphyLIVE!

"*%/ 1.-'4 +# &RPPHUFLDO ,QGXVWULDO $XFWLRQHHUV

10 Â&#x201E; The Original Lumbermanâ&#x20AC;&#x2122;s Exchange

murphyauction.com

Visit us online at www.LBXonline.com!

46$768+5573584"8!3 8 26#58 2,768'46, +58+ 26)7)8*&64( &83&78'4(638 +,,41.37)8 7/71 765&1,8348-1 (1)23783&78+5573584"

- % + #

&:8003274.974:375&

('+,)- ,(*'+,)

: -637:,4 +,8-54:,49 :)8629+ 748623+:% % :'878/8

36:.369:27 36.84237:37:)8*"2796&: : -20.974+:059819:*3748*4: //: 7-/197:84: "" " 36: .825:, ) & ) +$(,(*)* * (,!

,*-! -%)) #%$+* &--

% ,* ,('+(') , .."... ' #%$+* &-- , $-+ &( - !&( ( 3#: 7 99/:,&149.:* $: 9 86 961+:,*877961:94* +* "... ,') ( 8.09558+: 39"627#:%-50$33/: 627/961 ( -55: : 58* :'58$137:%8096: 90-50961 ( " 8.09558: 2#":,099/:,': : 68/9:%8096:)8*"279+: 371+: 9 -254: "" +:

9$:'3746351: ( ): 62#2785:'314:,43691: 7 97436& ):%-50: 68 4: 9$: 7 97436& "" 85.94:)3/95:!27 954:!27/961 ( 95.94: :!8641258:,-096:'8597/961 ( "" 85.94: 34:)954: 355:!680: 279 08'+* 8'2578 &77%8-42)765 08 8-4/4$431 75 08 21% 2#8 %238 7/ 8'2658 768 8*4#432 08'+*82.)8 2%78 46 %1"35 08! 1)8!37768-42)7658*6(/ 5

08*62.5,46376 08!/155468 8 2.8-1"35 08*62/34658 8*6(/ 5 08-26 78 3# 8 %7/361/8 43465 08+168'4$,67554658 08 76&72)8'62.75

08 8-26 78-23&75 08*44%644$ 08 2 61/231.

08!377%8 . 7.346# 08!(,,4638 (1,$7.38 8$467

& -*% - *%'+*$-$+&'+) &-,)$ - ,%-!,% -+) ,%!*'+,)-,)-* +'+,)*$-* ('+,)&-,%-',-& &(%+ -',-, %- !*+$ !*+$+) -$+&'& - +&+'

### +$(,(*)* * (,!- -### !* )*% & (,!- -### +$(,+) (,! +8 (#76 58 67$1($81581.8 ""7/3808 -8-1/7.578

steering pins. We changed the front and rear seals in the transmission, and the pinion seals in both differentials. The radiator has been repaired. It has new fan belts and hoses.

The steering valve, grapple valve, and brake valves were rebuilt. All cylinders have been repacked. The Lufkin winch has been rebuilt with new clutch packs. Installed new door latches. Doors open and close good. All fluids and filters have been changed.

The tires are 28L- 26 in size and the tread will average about 99 percent. Machine has been sanded and painted. The engine cranks up instantly and the transmission shifts good - Item ID-12302 - Daren 800-3159950 x603 Wanted: USED Cat 518C Series Skidders - We have customers looking for CAT Model 518C Skidders in running condition.

Grapple or Cable. Contact Tom. Will need serial numbers and photos. - Item ID-12432 Tom 800-315-9950 x604

SHOW ALL 525â&#x20AC;&#x2122;S

1998 CAT 525 Grapple Skidder -

9600 hours on well maintained machine. 34 x 25â&#x20AC;? Tires at 50%.

Single Arch Esco Grapple and Winch all work well. Center section tight. Cat engine runs

% $! "% $ #! well.

- Item ID-12429 - Tom 800315-9950 x604

683(5 &/($1

$ % $ # #% % 525

2001

Cat 525 Dual Arch Grapple Skidder - 5651 hours, Tires

are 50%, center pins #! $ "% $ # are tight. Machine is WOODS

$ % "" # ready.

- Item ID-12508 Michelle 800-315-9950 x603

525B !! "

2003 Cat 525B S/A Skidder Good condition. 10,500 hours.

New Transmission. Recent work done. Runs well. CA - Item ID-12189 - Tom 800-3159950 x604 2004 CAT 525B Grapple Skidder PRICED TO SELL FAST!!!! - 8,538 hours, Caterpillar 3126 Engine, Powershift transmission, 30.5L-32 Tires (3 Poor, 1 Like New), More photos available, Machine is in southeast - Item ID-12424 - Daren 800-315-9950 x603

CBI

â&#x20AC;&#x2DC;76 JD 440B Skidder Item ID: 12494 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

1999 CBI Model 4800 Grinder 1680 Hours: Twin Disc Clutch; Flex reversible fan, Remote control, Weight 93,000 lbs., Tires 445/65R22.5, New teeth, Updated hammers, Full engine service just completed; Cat 3412 engine w/12 cylinders; Ready to go to work; Very good condition - Item ID-12047 - Tom 800-315-9950 x604 2009 CBI Model 6400T Grinder - CBI Grinder Model Magnum

For Classifieds Call Your LBX REP at 1-800-315-9950

â&#x20AC;&#x2DC;93 Timberjack 450C Dual Arch Grapple Skidder w/Winch

Item ID: 12510 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com Force 6400T. Weight: 80,750 lbs. Cat C27 engine w/1050 HP. 1850 hours; 1 1/2â&#x20AC;? x 2â&#x20AC;? screen. 95% U/C. Customer has the feeder belt. Very good condition! - Item ID-12422 Tom 800-315-9950 x604

CHIPPERS

2008 Dynamic 585 Chipper Factory Rebuilt with upgraded components including new discharge chute, new larger bearings, new larger feed pins, May 2012 Â&#x201E; 11

12 The Original Lumberman’s Exchange

Visit us online at www.LBXonline.com!

Timberjack 450B Single Arch Grapple Skidder

â&#x20AC;&#x2DC;10 Bandit 2400 Tracked Disc Chipper

w/Winch

Paper Quality Chips!!

Item ID: 12511 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com

Item ID: 12501 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

new access panels to chip chamber wear plates. JD 500 HP engine with 2200 hours.

Limited factory warranty on upgraded features. - Item ID12059 - Tom 800-315-9950 x604 48â&#x20AC;? Precision Chip Pack - 5x5 screener, with a brand new Y valve, 100 hp electric motor on the chipper, 15 hp motor on the blower, and a 3hp motor on the shaker. This machine is in very good condition and is ready to work. There is a vibrating conveyor available with this machine. Ask about details and price. - Item ID12128 - Daren 800-315-9950 x603 48â&#x20AC;? Precision Chip pack Currently being refurbished and will have new knives, new holders, new bearings, new paint, and a 30 day warranty.

This machine will be ready to work!!! Before and after photo - Item ID-12484 - Daren 800-3159950 x603 Precision 58â&#x20AC;? Chip Pack Completely refurbished and is ready to work. - Item ID-12233 - Daren 800-315-9950 x603 Precision 58â&#x20AC;? Chipper Complete rebuilt with Factory Warranty. - Item ID-12232 Daren 800-315-9950 x603

haul on 10 ton trailer. - Item ID12249 - Tom 800-315-9950 x604 1978 Clark 666 Grapple Skidder - Strong skidder. Esco 26 grapple with winch. 28L x 26 tires at 60%. Open ROPS cab. Stick Steering. Detroit 4-53 engine. Runs good. - Item ID12325 - Tom 800-315-9950 x604 1989 Clark 666 Dual arch grapple skidder - The machine has a new cummins 5.9l engine with less than 300 hrs on it. A new grapple with around 50hrs, 2 new interstate batteries and a new starter on it. It fires right up even in the winter. This machine is ready to work!!! - Item ID-12219 Daren 800-315-9950 x603 Clark 664D Cable Skidder - 5 cylinder 88hp deutz engine, newly rebuilt transmission, new head gaskets, new injectors, new mainline. - Item ID-12221 - Daren 800-315-9950 x603 WANTED: Used Clark F Series Skidders - If you have an older Clark F Series Cable or Grapple Skidder that you would like to sell, please call to discuss. We have customers looking. Year models are from around 1986 to 19995. - Item ID-12151 - Tom 800-315-9950 x604

1976 Clark 664 Cable Skidder - Approximately 7500 hours.

S/N 514F-2341-CAC. Strong Clark Winch; Tire chains; Pulls good. Front tires at 70%. Rears at 30%. Detroit 3-53 runs well.

Center pin tight. Slight play in steering pin. Straight metal.

Weighs about 18,000 lbs. Can

Circle Sawmill - Includes Mellot conveyor, Carthage carriage, Helle setworks, Helle log turner, hydraulic power pack 25-hp, 100hp electric motor, 25hp electric motor and all starters. - Item ID-11992 - Michelle 800-315-9950 x603 Frick Automatic Sawmill - 3

CLARK

COMPLETE SAWMILLS

When You Buy Your Circular Saws From B.H. Payne Youâ&#x20AC;&#x2122;ve Bought the best... We Guarantee It! Traditional Quality Combined With Todays Technology Quality Brand Reg. U.S. Pat Off

Circular Saws Saw Bits and Shanks Circular Knives Carbide Tipped Saws Carbide Strobe ÂŽ Saws B.H. Payne & Company Saw Manufacturers

Call 800 752-0627

Make Sure To Ask For Our Free, Complete Saw Catalog We Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels, Knife Grinding Wheels, Saw Gumming Wheels & Knives.

Hereâ&#x20AC;&#x2122;s What You Get With Every B.H. Payne Saw Â&#x2021; 6DZV PDQXIDFWXUHG IURP RQO\ WKH +LJKHVW 4XDOLW\ 1LFNHO $OOR\ 6WHHO Â&#x2021; (DFK 6DZ 0LOOHG ZLWK 6WDWH 2I 7KH $UW 3UHFLVLRQ &1& 0LOOLQJ 0DFKLQH Â&#x2021; :H 7HQVLRQ <RXU 6DZ WR <RXU 530 6SHHG %()25( /HDYLQJ 2XU )DFWRU\ Â&#x2021; <RXU 6DWLVIDFWLRQ &RPSOHWHO\ *XDUDQWHHG

B.H. Payne & Company, Inc. P.O. Box 90608 (DVW 3RLQW *$ 404 761-8711 Fax 404 761-5398 â&#x20AC;&#x153;Since 1890â&#x20AC;?

E-mail: info@paynesaws.com

For Classifieds Call Your LBX REP at 1-800-315-9950

Web Site: www.paynesaws.com May 2012 Â&#x201E; 13

l Cal ay tod

AND ANOTHER TOP BRAND!!

Call or check our website to see the “Mystery Brand”

Call and see why we are the

FASTEST GROWING

bandsaw steel company in the USA.

NATIONWIDE SHIPPING

678-621-3732

Call for more info on pricing and quantities of all our blades.

TOP NAME Brand You Know 13’2” x 1.25” x 042

www.semetals.net

Lenox WoodMaster C 13’2” x 1.25” x 042

Simonds Red Streak 13’2” x 1.25” x 042

1375 $1399 $1425

$

INCLUDES SHIPPING!!!

Full Box of 30

Carbon Wood Cutting

INCLUDES SHIPPING!!!

Full Box of 30

Carbon Wood Cutting

INCLUDES SHIPPING!!!

Full Box of 30

Carbon Wood Cutting

Shipping prices based on a $35 per box UPS charge.

Depending on where you are in the country, your price could be EVEN LESS!

315-9950 x603

2004 Tigercat 724D Feller Buncher Will have 30.5 tires; Low hours!

Item ID: 12496 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

Head Block, Tyrone Berry Feed, 250 H.P. Cummins Power Unit, 4 Strand Live Deck With Stop And Load, Chain Type Log Turner, Frick Edger, Live Rollers, 30 Ft. Live Belt, 18 Ft. Green Chain. Ready To Work!

- Item ID-12217 - Chris 800-3159950 x600 Meadows #2 Sawmill - 15’ OAL with 4 headblocks - 3 hydraulic dogs - 5 axles, hydraulic

‘88 Timberjack 450B Dual Arch Grapple Skidder w/Winch Item ID: 12512 Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com setworks with pantograph arm assembly to carry hydraulic & electric lines from carriage to husk - clock face lumber dial - controls for setworks & dogs. Meadows #2 track frame, with idler assembly. Reckart hydraulic feed package with 40-hp electric motor. Mellott log turner. 35’ log deck with stop & load. 130KW generator.

- Item ID-11086 - Michelle 800-

14 The Original Lumberman’s Exchange

CSI

2004 72” CSI R72 Circle Saw - hydraulic. 20’ deck. Sold without the blade. New blade is additional $3500. Was over $40,000 new, 2 years ago. machine needs a new blade, 1500 hrs, it was used to cut logs Price : 17,000.00 USD - Item ID-12125 - Michelle 800315-9950 x603

DAEWOO

2002 Daewoo 290LL Log Loader - Located in MI. Daewoo 290LL, Pierce Pacific Log Loader Package, Elevated Cab, High Walker, Forestry Protected Cab and all logging guarded, Pierce Boom, Dry Chemical Fire Suppression System, Good Undercarriage, Butt n Top grapple. 2002 Year model, 19000 hours, but well maintained, updated, and upgraded. Runs very well. Man engine package lasts 40,000 hours. FOB: MI - Item ID-12480 - Tom 800-315-9950 x604

DEERE

1996 JD770BH Motor Grader - 7720 Hours; s/n DW770BH557633. 12’ Blade;

JD 6076 Engine. Very well maintained. Runs strong.

Excellent price. - Item ID-12313 - Tom 800-315-9950 x604 1998 650g Full Forestry Package - 3000 hours, works excellent 2010 complete under carriage new chains pads and sprockets winch and machine works excellent all pins and bushing all tight replaced main blade bushing replaced all blade cylinders Janurary 2011 Selling because no longer needed for my operation. Item ID-12488 - Daren 800-3159950 x603 1998 JD TC54H w/Logging Forks - Very well maintained machine. 13,000 hours.

Maintained by John Deere.

Machine used for personal only. Never on saw mill. Tires are 28L x 26 at 85%. Runs good. - Item ID-12467 - Tom 800-315-9950 x604 2000 JD 1270 Harvester 1270C; s/n 01GE0004; Year 2000; Hours unknown... estimated 7500; Cummins 218 HP Engine; Hydrostatic Transmission; Tires and wheels 700MM; John Deere 762C Processing Head; Boom

Visit us online at www.LBXonline.com!

Questions about Shaving Mills

6Â&#x2C6;Ă&#x192;Â&#x2C6;Ă&#x152;Ă&#x160; us at Â&#x153;Â&#x153;Ă&#x152;Â&#x2026;Ă&#x160; #3

s has 50pluyears of answers!

8LI 3VMKMREP 4EXIRXIH 7//$ 3(!6).' -),, oĂ&#x160;-Â&#x2C6;Â&#x2DC;ViĂ&#x160;ÂŁÂ&#x2122;Ă&#x2C6;ät

U Several Models to choose from producing 7.4 Cubic Yards (5.7 Cubic Meters) to 50 Cubic Yards (38.2 Cubic Meters) U Utilize low-grade Logs & Slabs U Produce high-quality, fluffy shavings U Powered by Electric, Diesel or Tractor PTO U Complete wood shavings plant layout services available U Shavings Drying Systems

Wood Shaving Mill

WE HAVE DRYERS AVAILABLE

- OR /7 Â&#x2021; "8 Âś 7 Ă&#x160;" ,Ă&#x160; "/ °Ă&#x160; * " Ă&#x160;1-Ă&#x160; ",Ă&#x160; / -°

WHAT OUR CUSTOMERS ARE SAYINGâ&#x20AC;&#x201D; â&#x20AC;?Jackson has been around long enough so theyâ&#x20AC;&#x2122;ve figured out what works and what doesnâ&#x20AC;&#x2122;t.â&#x20AC;?

â&#x20AC;&#x153;Jackson Wood Shaving Mills simply last longer. Theyâ&#x20AC;&#x2122;re rugged and dependable.â&#x20AC;?

â&#x20AC;&#x153;In volume tests on production, the Jackson Wood Shaving Mill was topsâ&#x20AC;&#x201D;and in day-in, day-out production, itâ&#x20AC;&#x2122;s still tops!â&#x20AC;?

â&#x20AC;&#x153;Our Jackson Shaving Mill was built in 1966 and is still going strong!â&#x20AC;?

â&#x20AC;&#x153;As our business has expanded, weâ&#x20AC;&#x2122;ve come back to Jackson for Shaving Mills again and again.â&#x20AC;?

â&#x20AC;&#x153;We like the low maintenance and availability of manufactured parts for our Jackson equipment.â&#x20AC;?

>Â&#x2DC;Ă&#x2022;v>VĂ&#x152;Ă&#x2022;Ă&#x20AC;iĂ&#x20AC;Ă&#x192;Ă&#x160;Â&#x153;vĂ&#x160;â&#x20AC;&#x201D; 2OU.$ 4(E WO 2,

$

! ,$ SO

Shaving Mills Webb Solid-fuel Burners â&#x20AC;&#x153;Premierâ&#x20AC;? Scragg Mills Stationary Sawmill Carriages Feedworks, Decks, Turners

!. $-

S ! !$E ). 4(E U

Hydraulic, Electric and Electronic Setworks Vertical Edgers, Horizontal Edgers â&#x20AC;&#x153;Lumber Harvesterâ&#x20AC;? Portable Sawmills

For Classifieds Call Your LBX REP at 1-800-315-9950

" * 9]Ă&#x160; ° 830 N. State Road 37, Mondovi, Wisconsin 54755 USA

7EBSITE WWW *ACKSON,BR(ARVESTER COM

PHONE >Ă?\Ă&#x160;­Ă&#x2021;ÂŁxÂŽĂ&#x160;Â&#x2122;Ă&#x201C;Ă&#x2C6;Â&#x2021;{x{x

May 2012 Â&#x201E; 15

0 / "OX s 0RENTICE 7) s

Ă&#x153;Ă&#x153;Ă&#x153;°Â&#x201C;Ă&#x2022;Â?Ă&#x152;Â&#x2C6;Ă&#x152;iÂ&#x17D;Â&#x2C6;Â&#x2DC;V°VÂ&#x153;Â&#x201C;Ă&#x160;UĂ&#x160;Ă&#x192;>Â?iĂ&#x192;JÂ&#x201C;Ă&#x2022;Â?Ă&#x152;Â&#x2C6;Ă&#x152;iÂ&#x17D;Â&#x2C6;Â&#x2DC;V°VÂ&#x153;Â&#x201C;

Multitek Firewood Processors Increase Your Productivity and Profitability Â&#x2122; FjVa^in :fj^ebZci id GZYjXZ ndjg AVWdg 8dhih Â&#x2122; 8^gXjaVg HVl dg 7Vg 8]V^c BdYZah Â&#x2122; , BdYZah id 8]ddhZ ;gdb Â&#x2122; EgdYjXi^dc GVi^c\h je id *#* ;jaa 8dgYh EZg =djg

Made in the U.S.A.

:2:

2001 Cat 525 Dual Arch Grapple Skidder Item ID: 12508 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com 28' 2"; Weight = 36,045 lbs.; Ground pressure 6.7 front 6.0 back; Overall Height 11â&#x20AC;&#x2122; 11" Length 23â&#x20AC;&#x2122;6" Width 9â&#x20AC;&#x2122;4". Very Motivated Seller. FOB: Alaska - Item ID-12477 - Tom 800-3159950 x604 2001 Timberjack/Deere 840 FB - Total hours = 8700. 75 hours on Rebuilt Engine. Machine is tight and dry. New Oil Cooler.

Joy Stick Steering. 34â&#x20AC;? Tires at 70%. JD 22â&#x20AC;? Saw Head is tight and runs well. Very clean unit

controls. JD 180HP engine.

Kodiak Trailer. Very clean and runs well. - Item ID-12523 - Tom 800-315-9950 x604 Deere 335 - 2006, Model 335, 5500 Hours, CTR 426 Delimber, Very good condition, one owner machine. - Item ID-12175 - Chris 800-315-9950 x600

335

2009 JD 843J Feller Buncher Item ID: 12490 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com and a great price. - Item ID12410 - Tom 800-315-9950 x604 2006 JD 310 Loader/Backhoe - 1762 Hours. Very nice condition. Extenda-Hoe. 4 wheel drive. Runs good. - Item ID-12464 - Tom 800-315-9950 x604 2009 JD 437C Loader with Delimber - Super Clean unit with only 3119 hours.

Complete with CSI 264 Delimber. Comfort Cab with AC/Heat/Stereo. Joystick

16 Â&#x201E; The Original Lumbermanâ&#x20AC;&#x2122;s Exchange

2007 John Deere 335C Loader - 2000 hrs, comes with a NEW CTR Reversable Bucksaw. Item ID-12234 - Daren 800-3159950 x603

440B

1974 JD 440B Skidder - Very strong skidder. New center pin. New JD Clutch. New Turbo on engine. Pulls extremely well. 18â&#x20AC;? tires at 40%. - Item ID12459 - Tom 800-315-9950 x604 1976 JD 440B - MINT CONDITION. WONâ&#x20AC;&#x2122;T FIND ANY BETTER THAN THIS! just over 3000 hrs. Excellent condition; New u bolts on the center shaft ( less than 6 mo ago); New front hyd pump ( one year ago); Center pins are tight; Does not burn oil; Like new set of bear paw chains on the front; Tires in excellent

shape approx. 70 %; Not used for commercial logging, strickly firewood ( pulled tops); Never been repainted or redone, all original; Comes with complete spare tire and rim; Brand new 100ft of cable on winch line ( less than 2 mo ago); New seat; Clean operator station; Starts really well even when it is very cold. - Item ID12494 - Tom 800-315-9950 x604

440C

1979 JD 440C Cable Skidder - Rebuilt Deere 4 cyl. engine; Manual Transmission, Bodygood, open cab w/ ROPS, dozer blade, diff locks, winch with cable; Tires - 16.9 x 30 4@30%; Hour meter shows 3400. Color - Yellow. VIN #: 440C334150T - Item ID-12091 Tom 800-315-9950 x604

540A

1977 (est) JD 540A Cable Skidder - Nice little unit that still runs well. 28L tires at 35%.

JD engine. Hour meter not working. - Item ID-12199 - Tom 800-315-9950 x604

540B

1984 John Deere 540B Skidder - Super Clean. 23â&#x20AC;? tires almost

Visit us online at www.LBXonline.com!

REAL TUFF

13*$&% 50 4&--

BALER&BAGGERTM 6DYH RQ %HGGLQJÂł%DOH LW <RXUVHOI (OHFWULF RU 'LHVHO 0DQXDO RU $XWRPDWLF

1984 JD 640 Cable Skidder Item ID: 12499 Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com new. Recent updates: Rebuilt Transmission; Rebuilt Winch; Rebuilt Rear End; Rebuilt Radiator. Working everyday in light hardwood application.

Owner retiring but has maintained this skidder in immaculate condition. No leaks. Metal is straight. Cab is clean. Owner took great pride in how he took care of this unit. You need to see this to appreciate it. - Item ID-12479 Tom 800-315-9950 x604

540G III

2006 JD 540GIII Cable Skidder - Only 1800 hours. Bought with 575 hours in 2009 and used sparingly in hardwood application. 23.1 Tirees at 80%.

AM/FM Radio with Heater in cab. Removable glass for summer. Great condition.

- Item ID-12411 - Tom 800-3159950 x604

548D

1991 John Deere 548D Grapple Skidder - with winch, machine is tight and ready to work Item ID-12208 - Daren 800-3159950 x603

SHOW ALL 640â&#x20AC;&#x2122;S

1994 JD 640E Cable Skidder Just over 10,000 hours; 23.1 x 26 Tires at 70%; Chains NOT included: Many updates-New Hydraulic Pump (6 months old), Rear end redone (3 Months ago); Hydraulic Control Block-New Seals (3 Months ago); Rebuilt Water pump (3 months ago). Unit running today. - Item ID-12500 Tom 800-315-9950 x604

640D

1984 John Deere 640D Cable Skidder - NEW TRANSMISSION;

$14,907 Effective May 1, 2011

â&#x20AC;&#x2DC;98 650G Full Forestry Package Item ID: 12488 Contact: Daren 800.315.9950 Ext. 603

BUILT TO LAST

www.LBXonline.com John Deere 6cyl Diesel Engine; 30.5 x 32 tires at 70%. Great flotation. Winch works well; Runs good. VIN #: 640DC513656 NC - Item ID12092 - Tom 800-315-9950 x604

643D

1992 John Deere 643 feller buncher - Complete rebuild & paint less than 1000 hrs ago. New 28 L tires under 300 hrs. Brand new ice chains are included. All pins are tight, cylinders are dry. Strong hydraulics & hydrostats.

Strong 6.8 L turbo diesel, 175 hp, no smoke or blow by.

Many new parts & hoses. Has some minor hydraulic leaks & minor slop in the accumulator arm. Great brakes. E -brake needs adjusting, back up alarm doesnt work. No heat or a/c.

Has a 20â&#x20AC;? shear head. - Item ID12285 - Chris 800.315.9950 x600 1992 John Deere 643 Shear Feller Buncher - Complete rebuild & paint less than 1000 hrs ago. New 28 L tires under 300 hrs. Brand new ice chains are included. All pins are tight, cylinders are dry. Strong hydraulics & hydrostatic transmission. Strong John Deere 6.8 L turbo diesel, 175 hp, no smoke or blow by.

Many new parts & hoses.

Great brakes. No heat or a/c.

Has a 20â&#x20AC;? shear head. - Item ID12537 - Tom 800-315-9950 x604

Â&#x2122; :Vhn id jhZ Â&#x2122; 7j^ai d[ ]^\] fjVa^in bViZg^Vah VcY ldg`bVch]^e Â&#x2122; =ZVkn Yjin id ZcVWaZ V WgdVY heZXigjb d[ WVa^c\ dei^dch Â&#x2122; :Vh^an adVYh Wn XdckZndg dg bVcjVa bZi]dY

Real Tuff Baler Dimensions & Specifications - (2) Hydraulic Cylinders are controlled by using a two spool valve + 3 PRWRU YROW SKDVH

starter not included - 25 G.P.M. Pump - 50 Gallon reservoir capacity - Only the highest quality industrial components are used

6)%0 89** -2(9786-)7

Phone: (325) 641-8300 Fax: (325) 643-3243 Manufactured by M & F Gauge & Specialty Co., Inc. 32 %R[ Â&#x2021; %URZQZRRG 7H[DV www.realtuffbaler.com

SHOW ALL 648â&#x20AC;&#x2122;S

2010 JD 648H Grapple Skidders - LOW HRs. - 2300 hours.

Owner lost his job. 30.5 x 32 tires at 95%. Dual Arch Grapple. Save $80,000 off new.

Super Clean! - Item ID-12473 Tom 800-315-9950 x604

648G III

For Classifieds Call Your LBX REP at 1-800-315-9950

May 2012 Â&#x201E; 17

To find the nearest dealer call:

(888) 820-3962 18 Â&#x201E; The Original Lumbermanâ&#x20AC;&#x2122;s Exchange

Visit us online at www.LBXonline.com!

BANDSAW BLADES

We have the most popular sizes in stock & ready to ship from major manufacturers, includingâ&#x20AC;Ś

We also offer expert Sharpening Services, plusâ&#x20AC;Ś

Gang Â&#x2021; Edger Â&#x2021; Scragg Trim Â&#x2021; Split Â&#x2021; Strob â&#x20AC;Śand

just about any Custom Saws you need to keep you cutting longerâ&#x20AC;Ś for less!

Welded to your lengths!

Call Marvin Miller for a quote 231-924-5953 Â&#x2021; (fax) 231-924-6166 Â&#x2021; 11606 Brickyard Rd. Â&#x2021; Holton, MI 49425

1998 Model DM Mack Log Truck Item ID: 12493 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com 2002 John Deere 648GIII Dual Function Grapple Skidder - 9700 total hours, 3000 on Reman. engine, Reman. transmission 6000 hrs. 30.5x32 tires at 60%. MAchine is working daily. - Item ID-12231 Daren 800-315-9950 x603

SHOW ALL 748â&#x20AC;&#x2122;S

2010 JD 748H Grapple Skidder - Like New Condition. 2100 hours. 30.5 x 32 Tires at 80%. Loaded. Customer lost contract. Save big over new machine purchase. - Item ID12282 - Tom 800-315-9950 x604 2011 JD Model 748H Dual Arch Skidder - 30.5 x 32 Tires. 600 Hours. Job shut down after buying skidder new in Jan. Save 10% off new and pay no sales tax! - Item ID-12262 - Tom 800-315-9950 x604

748G III

2006 JD 748GIII Dual Arch Skidder - Approx 8400 hours; Very well maintained; 30.5 tires at 40%; Sweda axles; Winch. Unit working everyday.

- Item ID-12117 - Tom 800-3159950 x604

843H

â&#x20AC;&#x2DC;00 Timberjack 660 Dual Arch Grapple Skidder w/Winch Item ID: 12509 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com 2004 JD 843H Feller Buncher w/JD 22â&#x20AC;? Hot Saw - Very clean machine. Model 843H; Year 2004; S/N WC843HX882337; Condition Good; Hours 3,267; Engine JD 6.8 liter; Tires 28L26 14 ply 50%; Chains on front tires; Enclosed cab with heat and air; JD Hot saw head 22"; All functions work. No leaks. ONE OWNER. WELL MAINTAINED. - Item ID-12466 Tom 800-315-9950 x604 2009 John Deere 843J Feller Buncher - 1800 hours. Very clean machine in excellent condition. Customer lost job.

30.5 x 32 Tires at 90%. JD Hot Saw. Comfort Cab with Head/ Air/Stereo. - Item ID-12490 Tom 800-315-9950 x604

DRESSER

1981 Dresser 510B - Dresser 510B Pay Loader, meter shows 8571 hours. Had a new Komatsu engine installed 3000 hours ago. Starts and runs great, tires are 85%.

Comes with forks, owner also has bucket. - Item ID-12359 -

s 3TANDARD 0ITCH 3AW #HAIN

WITH +ERF

s !UTOMATIC #HAIN /ILER s 5, !PPROVED 7IRED TO .%-!

3TANDARDS

Booth L6: Stop by our friends at DiehlClayton Equipment, Inc., to see us!

WE ALSO OFFER THE FOLLOWING: 3PARE 3AWBAR ALL TYPES AND 2EPAIR #ENTER FOR !LL 5SED "ARS 3AW #HAIN ,OOPS OR 2EELS s #HAIN 4AKE UP ASSEMBLIES

(360) 687-2667

office@seringsawmillmachinery.com www.SeringSawmillMachinery.com

Michelle 800-315-9950 x603 1984 Dresser 520B - 1984 Dresser 520B, 4125 hours, 125 hp, 4x4, 3 speed transmission with reverser, 3rd hydraulic function, quick attach with 8â&#x20AC;&#x2122; bucket, lights and heater on 12 volts, tire size 17.5 tires are at 40% all around - Item ID-12485 Daren 800-315-9950 x603

FIREWOOD PROCESSORS

Best Value Portable Log Splitter - Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32â&#x20AC;?. Uses 13HP Honda motor.

Manual start but electronic

For Classifieds Call Your LBX REP at 1-800-315-9950

option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way.

Great Value! PA - Item ID-12062 - Tom 800-315-9950 x604 New 2010 Puma Model 18GM Firewood Processor - Brand New. Can produce up to 2 cords/hour. The 18 GM Firewood processor is the introductory PUMA model.

Standard features include a live deck, fold-able stacking conveyor, and a foldaway hitch for easy storage. The 18GM Firewood processor is capable of splitting up to May 2012 Â&#x201E; 19

n uctio e d o r anc est P High t Mainten !! s D! Lowe RANTEE GUA

Trailer:

Tandem axle, 8’6” wide, 22’-30’ long, 11’8” high, 5-7 tons, Electric brakes.

Saw:

Superior Carbide Slasher - Cut wood instead of sharpen chains 36” to 60” diameter, 2 ga Carbide Slasher.

Engine:

50 to170 HP or PTO Drive with user’s tractor.

Hydraulics:

Commercial Shearing

Splitter:

35 - 72 tons, 3-5 second cycle time; 2, 4, 6, 8, 10, 12, 14 & 21 way pkg wedge.

Capacity - 4” to 27” Log diameter 0” to 48” Block Length Lifetime warranty on the entire splitter chamber.

Infeed Conveyor:

16” - 30” long Hydraulic powered.

Clean out Hopper: Get rid of bark and wood slivers before being conveyed away.

NEW GRAPPLE SYSTEM Now Available!

2040 ROGERS ROAD, PERTH, O N TA R I O K 7 H 1 P 9 CANADA

www.cord-master.com Email: cordking@cord-master.com

Today!

888-219-9663 20 The Original Lumberman’s Exchange

Visit us online at www.LBXonline.com!

2004 HydroAx 570 Feller Buncher Item ID: 12316 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com two cords per hour at the centralized operator station.

The 18GM is built with heavyduty construction, offers a quiet Honda engine, and is perfect for the small start-up operation or weekend warrior.

- Item ID-12299 - Tom 800-3159950 x604 Portable Firewood Processor with Circle Saw - 48” Circle Saw, Powered by a 6cyl Perkins Diesel, 165 hp, 20’ conveyor, Pintle hitch, 6way wedge, It is a heavy-duty machine in ready to work condition. - Item ID12435 - Michelle 800-315-9950 x603 Shop Built Portable Firewood Processor w/48” circle saw - enclosed cab, 3 strand live deck, diesel powered, mounted on 5th wheel trailer, over had over 100k invested before he pasted away.

Family is open to offers on this machine - Item ID-12507 Daren 800-315-9950 x603

FORKLIFTS

1994 Moffett Truck Mount Fork Lift - Very clean machine. Runs well. Owner using now. 2686 Hours. Priced to sell. Great for delivering products or working in warehouse with high reach.

This is a bargain! - Item ID12321 - Tom 800-315-9950 x604 2004 Moffett Model M5500 Truck Mounted Forklift - 1418 Hours; Kubota Diesel; 4' Forks, Side shift, 4 Way steer, 12' Mast, Tires Front 31.5X1316.5, Rear 31X15.5-15. If you deliver products on a truck, this forklift goes with you. Top brand in the industry. Priced to sell. - Item ID-12069 - Tom 800-315-9950 x604

‘78 Timberjack 380 Dual Arch Grapple Skidder w/Winch Item ID: 12513 Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com FRANKLIN

1977 Franklin 132XL Forwarder - Nice machine. Runs good.

Tires at 50%. - Item ID-12528 Tom 800-315-9950 x604 2002 Franklin 185 Cable Skidder - Very clean machine with about 7800 hours.

Cummins Power. One owner.

Well maintained. Tires at 80%.

- Item ID-12451 - Tom 800-3159950 x604 2003 Franklin 185 Cable Skidder - 7600 Hours; Very good condition; Cummins Power; Enclosed Cab with working heat and air; Tires at 80%. S/N18562 - Item ID-12447 - Tom 800-315-9950 x604 2003 Franklin Q70 Grapple Skidder - 2003, Model Q70M31A, Enclosed Cab W/Heat & A/C, 28Lx26 Tires 85% Rear, 70% Front, 100 Hours On Dealer Rebuilt Transmission, 600 Hours On Cummins Recon Engine 6BTA 200 H.P. Winch and Grapple. Excellent one owner machine! - Item ID-12337 - Tom 800-315-9950 x604 Franklin Skidder - 2003, Model Q70-M31A,Enclosed Cab W/ Heat & A/C,28Lx26 Tires 85% Rear,70% Front, 100 Hours On Dealer Rebuilt Transmission, 600 Hours On Cummins Recon Engine 6BTA 200 H.P. Excellent one owner machine! - Item ID12152 - Chris 800-315-9950 x600 Franklin Skidder Model 142 - Hours 7230, Good strong machine, 453 Detroit Power unit - Item ID-12376 - Daren 800-315-9950 x603 Franklin Skidder Model 170PT Franklin Skidder Model 170PT, New tires, New cable, Hours 6585 - Item ID-12377 - Daren

1998 JD TC54H w/Logging Forks Great condition!

2004 Bandit 2400 Track Chipper

Item ID: 12467 Contact: Tom 800.315.9950 Ext. 604

Item ID: 12518 Contact: Daren/Michelle 800.315.9950 Ext. 603

www.LBXonline.com

For Classifieds Call Your LBX REP at 1-800-315-9950

www.LBXonline.com

May 2012 21

Reconditioned Electrical Equipment Saves You Money, Big Money!

Caterpillar 225LC Shear Excavator

We Buy, Sell, or Rentâ&#x20AC;&#x201D; Used, Obsolete and Hard to Find Industrial Electrical Equipment

VFD CONTROL

Many Items In Stock Ready for Immediate Shipment!

AUTOMATIC REDUCED VOLTAGE STARTER

ALL SIZES OF MOTORS

MANUAL TRANSFER SWITCH

www.LBXonline.com COMBINATION STARTER

13*$& %3011&%

When you need it NOWâ&#x20AC;&#x201D; And at the BEST Price!

YOU NEED WEAVER ELECTRIC MOTOR CONTROL STARTERS (Solid State)

Item ID: 12517 Contact: Daren 800.315.9950 Ext. 603

2001 Quadco 22B Hot Saw REBUILT! Like New! 360° Item ID: 12471 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

DISCONNECT SWITCH

CALL TODAY!

Toll Free 800-257-0038

3K Â&#x2021; )D[ 6591 N. Washington, Denver, CO 80229 Web: www.weaverelec.com (PDLO VSDUN#ZHDYHUHOHF FRP

800-315-9950 x603

SHOW ALL Q80Câ&#x20AC;&#x2122;S

2003 Franklin Q80 Grapple Skidder - 7500 hours, but just 5000 hours on reman engine.

New Radiator; New Hydraulic Pump; Comfort cab with good working heat and air; Tires at 80%. - Item ID-12450 - Tom 800315-9950 x604

GYRO TRAC

2006 GT25 Gyro Trac Refurbished undercarriage at 80% with new tracks and new set of cutter teeth, this machine is work-ready. 773 hours on Cummins 230HP diesel, overall good condition.

Pressurized cab, winch, ROPS. - Item ID-12268 - Tom 800-3159950 x604

HAYBUSTER

Haybuster IG-10 Tub Grinder - This 8-ft. tub is powered by a 275 hp CAT engine. This portable tub grinder has 48 swinging hammers and a set of 1" screens. Unit also has new clutch and belts, and the hammers are in good shape.

It was being used to grind green waste but can also be

1999 Timbco 820 Forwarder

used for processing many types of wood waste. With a pintle hitch for mobility, this machine is ready to be pulled to your site today and put to work. - Item ID-12361 - Michelle 800-315-9950 x603

HOGS/WOODGRINDERS

West Salem Grinder and Gen Set - Model WSM 2822, With a Cutler Hammer Soft start.

There is also a full set of extra hammers that go with it plus one original from factory to use as a pattern when rebuilding the others with hard surfacing. The gen set is a 360 KW with a Big Cam 855 Cummins engine. Extremely low 670 Hours. Owner is negotiable. - Item ID-12386 Daren 800-315-9950 x603

HOOD

1996 Hood 20000 Loader w/ Delimber & Circle Saw Slasher - Hour meter shows 1650 hours on rebuilt engine. Slasher and delimber run good. 30â&#x20AC;&#x2122; boom.

Overall good condition. - Item ID-12433 - Tom 800-315-9950 x604

22 Â&#x201E; The Original Lumbermanâ&#x20AC;&#x2122;s Exchange

HUSKY

Runs well!!

Item ID: 12454 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com 1994 Husky 235XL Loader Package - Hour meter broken.

OT Delimber Trailer; CTR 314 Cradle Delimber; Bar Slasher; Heat and AC work; Strong Loader; JD 160HP Engine.

- Item ID-12445 - Tom 800-3159950 x604

HYDRO-AX

2004 Hydro-Ax 570 Feller Buncher - 9405 Hours. S/N HA18599. Cummins 205HP Engine. Hydrostatic drive.

Hydro-Ax bunching saw head with side cut feature. New 30.5 x 32 tires. New engine 2500 hours ago. New Gear Box 2500 hours ago. New saw disc. Runs well. Ready to go. - Item ID12316 - Tom 800-315-9950 x604 2005 Hydro Ax 670 with 22in Saw head - 7200hours, 22inch high capacity bunching head, New Cummins engine, 1 new firestone tire other 3 at 40%, Tires are 30.5 - Item ID-12481 Daren 800-315-9950 x603

â&#x20AC;&#x2DC;92 Morbark 6300 3-Wheeled Feller Buncher w/Hotsaw Head

Item ID: 12514 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com

511EX

1996 511EX Hydro-Ax With Bunching Saw Head - Hours est at 6800. Only 200 hours on factory reconditioned hydraulic motors and pumps.

Comfort cab with working air.

28L tires with chains at 50%.

Saw head has side pocket for cutting larger trees. Very well maintained machine. - Item ID12072 - Tom 800-315-9950 x604

HYUNDAI

1999 Hyundai 280 w/Denharco 3500 Stroker - Good running unit. Priced to sell. Approx 9800 hours. Could use some updates, but great value. - Item ID-12455 - Tom 800-315-9950 x604

LIEBHERR

2007 Liebherr A924B Wheeled Log Loader - 10,100 hours.

Very Good Condition. Liebherr

Visit us online at www.LBXonline.com!

The most crucial component of a sawmill is the blade.

When it comes to Wood-Mizer blades, blades sharpening equipment, and ReSharp™ service, you can expect quality, %/$'(6 accuracy and a longer life.

FOR ALL BAND SAWMILLS

Visit us on Facebook

6+$53(1,1* (48,30(17

800.553.0182 woodmizer.com

© Copyright 2012, Wood-Mizer Products, Inc.

5(6+$53™ 6(59,&(

Now, Three Ways to Make Your Day More Profitable 1

5DSLGR /RFR -XQLRU

5DSLGR /RFR

Smaller, but just as powerful.

4 Cords/hr. up to 16" diameter wood.

50' slasher saw with 8-way wedge.

Take on huge yields with a reasonable pricepoint.

$46,900

$54,900

WOODBINE FIREWOOD PROCESSORS

3

MADE IN USA

:K\ VSHQG WZLFH DV PXFK 0DNH SURILWV QRW KXJH SD\PHQWV Let us show you the Woodbine way........$67,900

)DPLO\ 2ZQHU Â&#x2021; )DPLO\ 2SHUDWHG _ +\GH 0LOO 5RDG Â&#x2021; :LOOLDPVEXUJ 0$

&DOO Â&#x2021; ZZZ FUGPHWDOZRUNV FRP

PERFORMANCE 3 POWER 3 PROFIT 3

2/7 %,%#42)#!, %15)0-%.4 ).# 9/52 3/52#% &/2 53%$ 2%#/.$)4)/.%$

s 3QUIRREL #AGE -OTORS s 'EAR -OTORS s 7OUND 2OTOR -OTORS s 3YNCHRONOUS -OTORS s $# -OTORS

FAX TO:

s $# -OTORS #RANE AND -ILL s !DJUSTABLE 3PEED $RIVES s 'ENERATORS !# AND $# s %NGINE 'ENERATOR 3ETS s 4RANSFORMERS 3INGLE 0HASE

*°"°Ă&#x160; Â&#x153;Ă?Ă&#x160;Ă&#x201C;nÂŁĂ&#x201C;Ă&#x160;UĂ&#x160;/Â&#x153;Â?i`Â&#x153;]Ă&#x160;"Â&#x2026;Â&#x2C6;Â&#x153;Ă&#x160;{Ă&#x17D;Ă&#x2C6;äĂ&#x2C6;

s 4RANSFORMERS 4HREE 0HASE s !CROSS ,INE -AGNETIC 3TARTERS s 2EDUCED 6OLTAGE 3TARTERS s 3AFETY 3WITCHES s 0HASE #ONVERTORS

800-248-4479

WWW.ROWELECTRICAL.COM 419-248-4479 rowelec@glasscity.net 7% !.37%2 4(% 0(/.% (/523 s 7% "59 53%$ %,%#42)#!,

419-244-8887

-*,& /&8 .645 4&--

2000 Sterling Road Truck/ Tractor Reduced! Owner must sell!

Item ID: 12323 Contact: Tom 800.315.9950 Ext. 604

1993 Morbark 6300 Feller Buncher on Tracks w/Hotsaw Item ID: 12515 Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com

www.LBXonline.com

makes the highest quality heavy equipment in the world.

This unit can go another 20,000 hours. 44â&#x20AC;&#x2122; reach with over 7000 lb capacity at 40â&#x20AC;&#x2122;.

Hydraulic raising cab for 16â&#x20AC;&#x2122; 8â&#x20AC;? operator eye level. Front blade for pushing or cleaning road debris. Grapple NOT included.

Travels up to 12.5 mph with variable speed hydraulic transmission. Super smooth hydraulics make this a great wood yard machine. - Item ID12503 - Tom 800-315-9950 x604

The crane model number is BAR803-C S/N 18615. It has a 20â&#x20AC;&#x2122; reach. Has a steel bed and has a front GAWR of 16,000 and a rear or 44,000 with floatation steers. It has good tires and runs good, - Item ID-12495 Tom 800-315-9950 x604 1995 JD 290D with Hytec 4700 Harvester Head - 290D in good condition. Engine just overhauled. Undercarriage at 50%. Cab has heat and air with stereo and all run well. Head recently updated and does great job in hardwood with stroker extension that shoots out at tough limbs. Priced to sell! - Item ID-12206 - Tom 800315-9950 x604 1997 MACK CL713 with 18ft Petty built Pup trailer - 1997 Mack CL713 EZ427 replacement engine with 220k in Dec. 09, NEW! 18sp tran

LOGGING EQUIPMENT

1990 Volvo Grapple Truck 1990 GMC Volvo WG64 tandem axle grapple crane truck.

The GVW is 56000. Cummins diesel, horsepower 270. 9 speed manual transmission with spring suspension. No odometer only a hour meter.

Hour meter reads 21965.

2010 Valmet 860.4 Forwarder 800 hours; Low Price!!

Item ID: 12351 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com replaced by Mack Dec.08, 120C Prentice Loader, 22.5FT Rack, with Petty Built Pup Trailer (18.3ft).... Drive tires are at 40% and ster tires are rated at 50-60% - Item ID-12130 - Daren 800-315-9950 x603 1998 Model DM Mack Log Truck - 300 HP Mack Engine; 330,000 miles; 7 Speed Transmission, 46K Rear, 20K Front, Tri -Axle, 22.5 Tires, Like New Log Bed, Truck is in very good condition! Plumbed to take pup trailer. Very well maintained. - Item ID-12493 Tom 800-315-9950 x604 1999 Mack Truck with Prentice 120 - Mack engine and transmission. Runs good.

Strong Prentice 120E Loader.

Very nice package. - Item ID12448 - Tom 800-315-9950 x604 2000 Peterbilt Sleeper Truck - Good running condition.

For Classifieds Call Your LBX REP at 1-800-315-9950

â&#x20AC;&#x2DC;95 Morbark Wolverine 3-Wheeled w/16â&#x20AC;? Shear Head Item ID: 12516 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com Priced to sell. - Item ID-12492 Tom 800-315-9950 x604 2000 Peterbuilt Logging Truck - N-14Cummins engine, 18spd., 120 Prentice loader, pup trailer. - Item ID-12159 Michelle 800-315-9950 x603 2000 Sterling Road Truck/ Tractor - Truck has 259 k miles, a N-14 Cummins 370+ engine, 9 spd. trans. 4:10 rears with 4 air bag tandem axle, 24.5 rubber almost new. Runs Great! Includes wet line kit on truck. FOB: NC - Item ID-12323 Tom 800-315-9950 x604 2001 MCB 621REG Trommel Screen with Radial fines conveyor - This is a 2001 MCB 621REG. Radial fines conveyor, fixed overs conveyor, tipping grizzly bars, radio remote.

It has just over 8,200 hours, has had the drum replaced, has new rollers, and a new May 2012 Â&#x201E; 25

'JOBODJOH "WBJMBCMF

SHRINK WRAP FIREWOOD/WASTEWOOD

2005 Prentice 384 w/Saw Hookups

Sell Your WOOD – $300/cord or More!

Double or triple your profits by shrink wrapping wastewood - forewood with WOOD-PAKer! Attractive various size packages can be obtained with our high production, easily operated and affordable machines. Eight machines available. The ideal equipment for producing square bundles-palletizable for ease in storage and transporting.

Inquire for free details. Video and Package samples at nominal fee.

Item ID: 12396 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com

B & B ManufacturingÊUÊÎääÇÊ7iÃÌÊ, ÛiÀÊ, >`ÊUÊ" i> ]Ê 9Ê£{ÇÈä

4OLL &REE > \ÊLL v}JëÀÞ iÌ°V ÊUÊ7iL\Ê ÌÌ«\ÉÉ i°Ã«ÀÞ iÌ°V ÉHLL v}É

2000 CAT 962G Wheel Loader Item ID: 12407 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com

2010 Prentice 2670 w/ Bunching Head Item ID: 12452 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com belt and it was just sand blasted, painted and has all new decals. Also, one of the grizzly tipping cylinders was just replaced, and other work has just been completed.

The machine runs great and is ready to go to work - Item ID-12358 - Daren 800-315-9950 x603 2001 Precision 23/66 Whole Tree Chipper - One Owner: S/N 3310. Cat 3412E engine with 750HP s/n 4CR01701.

1994 CAT 518C Grapple Skidder Item ID: 12302 Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com New Injectors. Includes air compressor. Oil changed every 250 hours. 10,500 hours and runs like new. 3 axle trailer, California legal, rubber at 85%, and good brakes. Tows smooth. Equipped with Husky 175 loader. Has 3 knife disc with key knife system installed. Makes a super clean chip. Cab has heat and AC working well. Also has stereo radio and CB. New glass in loader. External chute controls. Super Clean! - Item

26 The Original Lumberman’s Exchange

1999 Mack Truck w/ Prentice 120 ItemID: 12448 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com ID-12526 - Tom 800-315-9950 x604 2001 Quadco 22B Hot Saw with Low Mounted Arms - High Torque Single Pinion Wrist; All Cylinders Rebuilt; Saw Disc Re-Centered to 1 3/8" thick, $3500.00 Value; New Beaver teeth; Saw Motor Rebuilt, new shaft and Adapter Spline; Drive shaft bearing surfaces re-chromed to new spec, New Bearings & Seals; All Cracks Repaired; New Paint. - Item ID12471 - Tom 800-315-9950 x604 2002 New Holland TV140

w/10’ Brush Cutter - Only 3000 hours. Very well maintained.

Brush Cutter has less than 500 hours. Complete with winch and forestry package.

Tires at 80%. Comfort cab with great visibility. Extremely productive and stingy on fuel.

- Item ID-12414 - Tom 800-3159950 x604 2005 Takeuchi Supertrack Skid Steer with B74 Fecon Head 981 Hours. 102 HP Engine. New Tracks. Fecon B74 Mulching head with new teeth. Winch.

Comes with spare 80” bucket.

Half the price of new. - Item ID12413 - Tom 800-315-9950 x604 2005 Waratah 622 Proc. Head with Top Saw - Good condition and well maintained. Needs minor maintenance and new monitor, but priced to allow for that. Complete with computer and some spare parts. Chain size is .404 top and 3/4 bottom. No drive motors have been replaced.

All working well. One cylinder leaking slightly. He is original

Visit us online at www.LBXonline.com!

Shop Built Portable Firewood Processor

See us at Booth M-3, Outside near Old

Ê `}°

w/48” Circle Saw

Item ID: 12507 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com

2007 Tigercat 250 w/2011 Log Max 7000XT Item ID: 12366 Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com owner. Machine received Waratah updates by Waratah about 2 years ago. New knives.

There is a pilot filter but not an inline filter - Item ID-12420 Tom 800-315-9950 x604 2006 Lamtrac LTR7230 with New FAE 175 mulching head - Only 522 demo hours, this machine still carries a warranty from the MFG. Equipped with Cummins C8.3 - 230HP. FAE Head is Brand New and has ZERO hours!

It replaces the head in the photo. Weight is 26,000 lbs giving it a very light 4.42PSI ground pressure. Superior traction and stability through Lamtrac’s unique quad track/ double articulated platform.

Priced well below dealer cost.

This is a bargain from the manufacturer that won’t be seen again. See more at www. lamtrac.com. - Item ID-12353 Tom 800-315-9950 x604 2006 Log Lift 115Z Foldable Self Loader - Never mounted.

This loader is the highest

quality on the market.

Includes Stainless Steel Cab that hydraulically raises 5 feet; Two Section knuckle boom with squirt extension for total of 32’...Longest Reach in it’s class. Lift capacity of 2000 lbs at full reach. Unique foldable ‘Z’ design allows loader to fold up and store totally behind the cab or between trailer and pup without resting boom in front of truck or on load.

Out & Down outriggers give maximum stability. Log Lift Loader also weighs 20% less than other loaders in it’s class.

Piston pumps give smooth fast

cycle times. Cab is heated and has joystick controls. A/C can be added. This is the best you can buy in a self loader. - Item ID-12356 - Tom 800-315-9950 x604 2006 Talbert 25T Trailer Model 25XPL Tri-Axle. 25 ton capacity with 25’ Floor with 6’ Dove. ABS. Tires at 70%. Very Good Condition. - Item ID12416 - Tom 800-315-9950 x604 2007 Kenworth W900B Log Truck w/Loader - Only 129,000 miles. Great condition. C-15 Cat engine with 18 speed transmission. New Tires.

24’ bed. Chalmers Axles,

For Classifieds Call Your LBX REP at 1-800-315-9950

20K Front; 46K Rear. Hubler Brothers Loader installation of Prentice 2124 includes headache rack oil cooler. 2011 Pitts Pup Trailer adds $10,000.

- Item ID-12412 - Tom 800-3159950 x604 2007 Lamtrac Model LTR6125 Mulcher - NEW TRACK MULCHER W/ MAGNUM HEAD & WARN WINCH, 14 hours. The multipurpose LTR6125 offers the possibility to install an array of attachments to fit all your needs. Easily changing from a Mulcher to a Brush Cutter, Root Rake, or Dozer Blade, the LTR 6125 can get May 2012 27

‘94 Husky 235XL Loader Package Item ID: 12445 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com the job done quickly and efficiently without the hassle of having 4 machines to do one job; the LTR6125 does it all! Complete MFG Warranty included. - Item ID-12166 - Tom 800-315-9950 x604 2008 Lamtrac Model 8290 Quad with FAE 300-U Head - Only 1200 Hours on this amazing land clearing machine. Super light foot print allows this machine to

2007 Morbark

22 RXL Chipper Great Chip Quality!!

Item ID: 12449 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com go where no other can and climb where no other machine dares! Cummings 290 HP provides maximum power to the head for best performance in its’ class. Very low ground pressure of 3.97 PSI. Weighs 36,000 lbs. Operator comfort is second to none. Safe and easy to maintain. This unit is priced well below wholesale. See www.lamtrac.com for videos and specifications. - Item ID12354 - Tom 800-315-9950 x604

28 The Original Lumberman’s Exchange

Euclid Dump Truck R-13 Item ID: 12373 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com 2008 Mack CHU 633 w/Low Boy Trailer - 150k miles on it. Vin is 1M1AN07Y98N001230. Also has a 2010 Kaufman trailer FR50DT in excellent condition.

Fantastic value. - Item ID-12535 - Tom 800-315-9950 x604 2008 NEW Lamtrac Model 8290Q Mulcher/Right of Way Clearing Machine - New 2008 w/15 demo hours and FULL FACTORY WARRANTY. Cummins QSC 8.3 Tier III 290HP; Rexroth Hydraulics;

40’ Finch Triaxle Log Trailer Item ID: 12505 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com Berco undercarriage; Weight - 36,000 lbs (with head); 3.7psi ground pressure ROPS/ FOPS/OPS certified cab with premium comfort package. Its ingenious four track, double articulated design enhances maneuverability while maximizing traction. Goes ANYWHERE! Best in class! TX - Item ID-12146 - Tom 800-3159950 x604 2009 Dynamic 585 Whole Tree Chipper - NEW! - Never

Visit us online at www.LBXonline.com!

2010 JD 648H Grapple Skidder Less than 3000 hours!

Item ID: 12473 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com Sold! Just 13 demo hours. Full factory warranty and updates.

Model CH 585. S/N available on request. Cummins 500 HP Engine. 28â&#x20AC;? x 22â&#x20AC;? Capacity.

Triple Chain Feed Deck. Cone Drum design for maximum fuel savings and best quality chips. Reversing engine fan.

Best price on market! - Item ID12400 - Tom 800-315-9950 x604 2009 Risley Eclipse R300 Mulcher - Well maintained machine with only 585 hours.

Owner downsizing operation.

All components in excellent condition. Tracks at 90%.

Risley Mulching Head cuts 102â&#x20AC;? wide. Weighs 30,400 lbs without head. POWER: Cumminsâ&#x201E;˘ QSL 9 litre Tier 3, 300hp @ 2100 rpm (BULGE 325HP @1900RPM); Spark arrestor muffler; 24 volt 2-12 volt batteries; 140 amp alternator; FlexXairEâ&#x201E;˘ Fan system (auto/man-reversing, VARIABLE PIT CH) POWER TRAIN; Transmission - Dualpath closed loop hydrostatic (Sauer-Danfossâ&#x201E;˘); Track Drive - Lohman GFT - 40 with Rexroth motors; Hydraulic filtration - Full flow; Attach ment - High Pressure/full flow filtration TRACK; â&#x20AC;&#x153;Chainlessâ&#x20AC;?

STEEL FlexTracâ&#x201E;˘; Interlocking 28" wide, single grouser (STEEL ) Pads (Traction lug ready); Rubber bush ing supported with high strength pins - Item ID-12534 - Tom 800315-9950 x604 2011 Pitts Pup Trailer Excellent condition. Tires at 80% Stakes straight. Photos

45â&#x20AC;&#x2122; Tri-axle Log Trailer w/ Prentice 120 Loader Item ID: 12506 Contact: Daren 800.315.9950 Ext. 603

SKIDDER TIRES

TRUCK TIRES

www.LBXonline.com say it all. - Item ID-12415 - Tom 800-315-9950 x604 2011 â&#x20AC;&#x2DC;NEWâ&#x20AC;&#x2122; GN Roy Model 2252C Hot Saw - Brand new 22â&#x20AC;? capacity hot saw. Never mounted. 360 rotation, planetary drive in the wrist.

Bent axial motor to run the planetary. They also us a 63 series Rexroth motor to turn the saw, same as Quadco, Koehring/JD, Cat etc. Includes new boom adapter & pins to match the machine. Save $25,000 off new price. - Item ID12472 - Tom 800-315-9950 x604 40â&#x20AC;&#x2122; Finch tri-axle Log Trailer 18 bunks, tires are road ready, everything works on the trailer. - Item ID-12505 - Daren 800-315-9950 x603 45â&#x20AC;&#x2122; Tri-axle Log Trailer with Prentice 120 loader - 45â&#x20AC;&#x2122; Triaxle Log Trailer with Prentice 120 loader, 9 bunks, brakes and tires are road ready. - Item ID-12506 - Daren 800-315-9950 x603 Eagerbeaver 20 Ton Trailer - 1987, Tandem Axle, Dual Wheels, 8.25R15 Tires Good, Manual Fold Down Ramps, Very Good Condition! - Item ID12179 - Chris 800-315-9950 x600 Euclid Dump Truck Model R-13 - Euclid Dump Truck Model R-13, Hours 3960, Engine Detroit Diesel - Item ID-12373 Daren 800-315-9950 x603 Iron Mule 4500 - Complete Overhauled Engine, Barko 40 Loader w/By Pass Bucket, Tires Like New - Item ID-12365 Michelle 800-315-9950 x603 Mack Truck $48,500 - 1998, Model DM Mack Truck, 300 HP Mack Engine; 330,000 miles; 7 Speed Transmission, 46K Rear,

Egd IgjX` I^gZh 6aa Di]Zg BV_dg 7gVcYh

ASK ABOUT FREE DELIVERY 6kV^aVWaZ ^c i]Z :VhiZgc J#H#

(800) 537-2042

MDI PROBE 2100

PORTABLE INDUSTRIAL METAL DETECTOR SIMPLE TO OPERATE â&#x20AC;&#x201C;

just turn on and go!

MDIâ&#x20AC;&#x2122;S SUPERIOR DIGITAL TECHNOLOGY will detect an 8d nail buried 15" into a log! s 0RE SET FOR MAXIMUM SENSITIVITY with adjustable sensitivity control s -ICROPROCESSOR CONTROLLED eliminates mineral interference from logs or round for maximum detection depths s "RIGHT , % $ DISPLAY indicates signal strength and battery level s 4OUCHPAD CONTROL allows precision pinpointing of tramp metal 0 / "/8 s %5'%.% /2%'/.

0(/.% s &!8 www.metaldetectorsinc.com

â&#x20AC;&#x153;Providing a full range of industrial metal detectors since 1965.â&#x20AC;?

For Classifieds Call Your LBX REP at 1-800-315-9950

May 2012 Â&#x201E; 29

PIPERâ&#x20AC;&#x2122;S Saw Shop â&#x20AC;&#x2DC;90 Prentice 210C Log Loader & 421 CTR Slasher

Â&#x2021;

Â&#x2021;

Item ID: 12487 Contact: Daren 800.315.9950 Ext. 603

Promotional Pricing Offer Simonds Red Streak Hard Back ´ [ [ ´ RU ´ /HQJWK œ ´

$14.71 $14.27 each

www.LBXonline.com

L im it e d T im e O n ly

Tell us you saw it here!

â&#x20AC;&#x2DC;09 JD 437C Loader w/ Delimber Item ID: 12523 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

20K Front, Tri -Axle, 22.5 Tires, Like New Log Bed, Truck is in very good condition! Plumbed to take pup trailer. Very well maintained. - Item ID-12178 Chris 800-315-9950 x600 Peterbilt Truck - 2000, Peterbilt Truck, Sleeper, Good running condition. - Item ID12176 - Chris 800-315-9950 x600 Rayco Stump Grinder Model RG1665AC - New teeth - Item ID-12374 - Daren 800-315-9950 x603

MORBARK

1987 Morbark 27 WCL NEEDS MOTOR - Morbark 1000 Knuckle boom loader, 3 knife disc, Newer discharge chute,

New banding around disc, Brakes and tires are also OK, Everything works well Newer clutch -- with outboard bearing, Had Cummins KTTA 750 HP engine -- needs repower - Item ID-12443 Daren 800-315-9950 x603 1988 Morbark 27 RXL Whole Tree Chipper - Morbark 1000 loader, Cummins Engine, This Machine is ready to work!!!!

- Item ID-12519 - Michelle 800315-9950 x603 1992 Morbark 6300 3 Wheeled Feller Buncher with Hotsaw head - 1392 hours, tires are 80%+/-, Machine is WOODS ready!! - Item ID-12514 -

30 Â&#x201E; The Original Lumbermanâ&#x20AC;&#x2122;s Exchange

Michelle 800-315-9950 x603 1993 Morbark 6300 Feller Buncher on tracks with Hotsaw - undercarriage is in GOOD condition, Machine is WOODS ready!! - Item ID-12515 - Michelle 800-315-9950 x603 1993 Morbark Model 20 Tracked Chipper - Just over 8000 hours. Very solid and compact machine in good condition and ready to work.

Compact for the size. Has loader so unit is totally self contained. Tracks at 60%.

Great value for a tracked chipper. - Item ID-12339 - Tom 800-315-9950 x604 2008 Morbark 3800 Wood Hog

- Just refurbished at factory.

Customer has invested $Thousands in upgrades to make ready for sale. Super Clean machine! Only 3064 hours. Very well maintained.

S/N 189-1033. JD 600 HP Tier 3 Engine. Remote control. Mag End Pulley. Hydraulic Fan. Break away mounts. PT Tec Wet Clutch. 3â&#x20AC;? Hex Screens.

- Item ID-12277 - Tom 800-3159950 x604 2011 Morbark 5500 Flail Debarker/Delimber - Cat C15 engine w/600HP. Only 912 hours. 3 Flail design. Gross weight 68,060 lbs. Like new!

Excellent condtion - Item ID12423 - Tom 800-315-9950 x604

22RXL

2000 Morbark 22RXL Chiphavester - The infeed area has been beefed up with T-1 steel for more strength and longer life with less weight. Enclosed weatherized operatorâ&#x20AC;&#x2122;s cab tilts hydraulically for transport . Overall Length 38â&#x20AC;? Transport

Visit us online at www.LBXonline.com!

SAWMILL EXCHANGE 1990 Volvo Grapple Truck

â&#x20AC;&#x2DC;96 Timberjack 610 Forwarder

Item ID: 12495 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

Item ID: 12521 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

2))(56 :(/&20(

North America's Largest Source of Used Portable Sawmills.

Over 800 Ads:

EdgiVWaZ HVlb^aah! 8dbbZgX^Va HVlb^aah! EVaaZi VcY 8jihidX` BVcj[VXijg^c\! ;^gZlddY BVcj[VXijg^c\!

8]^ee^c\ VcY <g^cY^c\! Ig^bbZgh! 9ZWVg`Zgh! 9gn @^ach! :Y\Zgh! GZhVlh! G^ehVlh VcY <Vc\ HVlh! AdVYZgh! BdjaYZgh VcY EaVcZgh! HVlYjhi 7adlZgh VcY 8]V^ch!

8dckZndgh$IgVch[Zgh$9ZX`h$<gZZc 8]V^c! Gdaa^c\ HidX`! and Much More!!

The Place to Sell Your Equipment 2002 Vermeer Horizontal Grinder HG365 Item ID: 12372 Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com height 13â&#x20AC;&#x2122; 6â&#x20AC;? Width 10â&#x20AC;? 6â&#x20AC;?

Weight 70000 lbs. Chipping capacity 22â&#x20AC;? diameter 750 hp 3412 CAT engine, M1000 loader - Item ID-12397 - Daren 800-3159950 x603 2007 Morbark 22 RXL 1000HP Chipper - 8000 hrs.

Cummins 1000 HP Engine runs strong. Just replaced feed tray, end spout, belly liners, hood liners, and one pump. Machine overall is in very good condition. S/N 2043. DISCHARGE SYSTEM: Dirt separator with deflector Hydraulic swivel/telescoping discharge spout. CHIPPER: 22" diameter chipping capacity, 75" diameter four-knife chipper disc with LH rotation Chip sizes: 5/8", 3/4", 7/8", 1", 1-1/4", 2". Hydraulic chipper hood for easy knife access.

30" x 10' CAT chain infeed bed. Enclosed weatherized operator's cab is mounted on rubber shock absorbers with combination air conditioner/ heater. Tilts hydraulically for transport. Six-way adjustable

1983 CAT 988B Loader w/Very Low Hours Item ID: 12375 Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com seat and joystick controls.

Morbark 1000 knuckleboom loader, 25' reach, 2100 swing and by-pass grapple. Lift capacity of 20,000 lbs. at 10'. OPTIONS: reversing fan, twin disc clutch; Electronic RPM sensor with automatic back feed; 11 hp quincy air compressor; pre lube on engine while starting. - Item ID12449 - Tom 800-315-9950 x604

1300

2003 MORBARK 1300 WCL TUB GRINDER - 1280 Hours, Morlift 400 loader with rotobec grapple, Cat 3412 engine, 860Hp, Twin Disc trans w dry clutch and driveline breakaway coupler.

Air compressor. Cab is extra clean. Includes all manuals in cab - Item ID-12401 - Daren 800315-9950 x603 1995 Morbark Wolverine 3 wheeled with 18â&#x20AC;? Hotsaw head - 1995 Morbark Wolverine 3 wheeled with 18â&#x20AC;? Hotsaw head, 5351 hours, Drive tires are 90%, Machine is ready to Work. - Item ID-12516 - Michelle 800-315-9950 x603

8Vaa Jh [dg V ;gZZ A^hi d[ DkZg -%% 6Yh dg id HZaa Ndjg :fj^ebZci#

800-459-2148 JH 8VcVYV

WWW SAWMILLEXCHANGE COM E#D# 7dm ,&%.(% Â&#x2122; =djhidc! IM ,,',& 1995 Morbark Wolverine 3-Wheeled Feller Buncher - S/N 4073. Only 1000 hours on new JD 4 cylinder engine. Recently replaced turbo. 23.1 tires at 50%. 16â&#x20AC;? Rapid Buncher shear head. Machine is fast and in very good condition. - Item ID12531 - Tom 800-315-9950 x604

PALLET MACHINERY

2005 Bronco Model 2006 Pallet Nailing System - Pallet nailing system with roll-out. Was used to build 48â&#x20AC;?x40â&#x20AC;?. New in 2005.

One owner. - Item ID-12108 Daren 800-315-9950 x603 Smart Bandsaw Dismantler 64â&#x20AC;? table. Two-man operation.

Less than 100 hours on a complete rebuild. Powered by a 15-hp 3-phase motor.

Push button table height adjustment. 400-700 pallets per 8 hour shift. Manufactured

by Smart Products. - Item ID11066 - Michelle 800-315-9950 x603 Williams 200 H.P. Hammermill Grinder - This 200 H.P. hammermill was recently removed from a sawmill where it was being used to grind

For Classifieds Call Your LBX REP at 1-800-315-9950

wood waste to boiler fuel for several large industrial customers. This grinder has a very large capacity and would work well in the grinding of whole pallets because it has a top opening size of 27" X 52".

This grinder is powered by a 200 H.P. electric motor that operates at 1200 RPM and uses 460 voltage for its power.

The electric motor is direct coupled to the grinder through a shear coupler to prevent damage from being done to the grinder. This machine is equipped with a bar type screen that determines the size material the machine is going to produce. Of course this screen can be changed to achieve many different size materials being produced from the same machine. This machine comes with a size # 6 motor starter and 600 amp breaker which are enclosed in a large free standing electrical cabinet. This is a very nice clean unit and would work ideally for many grinding applications. - Item ID-12011 May 2012 Â&#x201E; 31

32 The Original Lumberman’s Exchange

Visit us online at www.LBXonline.com!

.OW /NE 0HONE 0UTS 9OU IN 4OUCH WITH 4(% 3INGLE 3OURCE FOR ALL YOUR 3AWMILL .EEDS â&#x20AC;&#x2DC;07 Liebherr

A924B Wheeled Log Loader Item ID: 12503 Contact: Tom 800.315.9950 Ext. 604

â&#x20AC;&#x2DC;05 Hydro-Ax 670 w/22â&#x20AC;?

Sawhead Item ID: 12481 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com

8DGA:N H6LB>AA B68=>C:GN INGDC: 7:GGN 86GG>6<: 9G>K:H A:L>H 8DCIGDAH DEI>B>O6I>DC Carriage Linear & Set Shaft Lewis Controls â&#x20AC;&#x153;Electronics for sawmills by sawmillersâ&#x20AC;? /Ă&#x17E;Ă&#x20AC;Â&#x153;Â&#x2DC;iÂ&#x2021; iĂ&#x20AC;Ă&#x20AC;Ă&#x17E;Ă&#x160; >Ă&#x20AC;Ă&#x20AC;Â&#x2C6;>}iĂ&#x160; Ă&#x20AC;Â&#x2C6;Ă&#x203A;iĂ&#x192;Ă&#x160;EĂ&#x160;*>Ă&#x20AC;Ă&#x152;Ă&#x192;Ă&#x160;UĂ&#x160; i>`Ă&#x20AC;Â&#x2C6;}Ă&#x160;-Â?>LLiĂ&#x20AC;Ă&#x192;Ă&#x160; Â&#x153;}Ă&#x160;/Ă&#x2022;Ă&#x20AC;Â&#x2DC;iĂ&#x20AC;Ă&#x192;Ă&#x160;UĂ&#x160; >Â&#x2DC;`Â&#x201C;Â&#x2C6;Â?Â?Ă&#x192;Ă&#x160;EĂ&#x160; Â&#x2C6;Â&#x2DC;iL>Ă&#x20AC;Ă&#x160;,iĂ&#x192;>Ă&#x153;Ă&#x160;-Ă&#x17E;Ă&#x192;Ă&#x152;iÂ&#x201C;Ă&#x192;Ă&#x160; Â&#x153;>Ă&#x20AC;`Ă&#x160;EĂ&#x160; >Â&#x2DC;}Ă&#x160; `}iĂ&#x20AC;Ă&#x192;Ă&#x160;UĂ&#x160;/Ă&#x20AC;Â&#x2C6;Â&#x201C;Â&#x201C;iĂ&#x20AC;Ă&#x192;

www.LBXonline.com

The Most Complete Line of Sawmill Machinery Since 1905!

3INGLE -ACHINE OR #OMPLETE 4URN +EY /PERATION -ORE 0RODUCTION 0ROlT IS /NLY /NE #ALL !WAY &OR 0ARTS 3ERVICE 3ALES

Item ID: 12526 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com Daren 800-315-9950 x603

PEERLESS

1992 Peerless Drop Center Chip Trailer - One (1) Peerless Drop Center - Open Top - Chip Trailer 1992 Model - Serial#: 1PLE04426NPC80940 Model 44 - DC X 96â&#x20AC;? - Top Henge Rear Gate - Spring Suspension Reyco. 11R24.5 Tires - Steel Disc Wheels - Good Floor 50 - 70% Tires - Except 2 that are 40% 50% Brakes. - Item ID12341 - Tom 800-315-9950 x604 2006 Peerless Open Top Chip Trailer - One (1) Peerless Straight Floor - Open Top Chip Trailer 2006 Year Model - Serial#: 1PLE045206 PJ54716 Model 45 CST - Top Henge Rear Gate 11R 24.5 Tires - Steel Disc Wheels - Good Floor Spring Suspension - Reyco 50% Tires - New Brakes - Item ID12342 - Tom 800-315-9950 x604

PRENTICE

1997 IH 4000 Truck with Prentice Loader - 6 Cyl. Diesel

2003 CordKing 60 w/CordKing Conveyor Item ID: 12442 Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com engine; 26000 GVW. Used as yard machine. Loader runs and lift good. - Item ID-12261 Tom 800-315-9950 x604 2008 Prentice 2432 Dual Arch Skidder - Very good condition.

2800 Hours. 30.5 x 32 Tires at 60%. Working today. Machine is tight and dry. No blow by in Cummins engine. Dual Arch Grapple. Comfort Cab with AC/ Heat/Stereo. - Item ID-12536 Tom 800-315-9950 x604 2010 Prentice 2670 w/Bunching Head - ONLY 1504 Hours.

Excellent Condition. 34â&#x20AC;? Tires at 80%. One Owner. You will not find units like this on the market very often! - Item ID12452 - Tom 800-315-9950 x604 Prentice 210D - 1995, Model 210D Mounted On A Prentice Articulated Self Propelled Carrier, S/N 210P52736, Prentice C742 Grapple, Lever Controls, 6059 Deere Engine. Working daily,good dependable machine. - Item ID12174 - Chris 800-315-9950 x600

MFG

â&#x20AC;&#x2DC;01 Precision 23/66 Whole Tree Chipper

Call (423) 698-0284 #/2,%9 WWW CORLEYMFG COM s SALES

Prentice 490 - 2006, Model 490, Dual Arch Grapple Skidder, 8000 Hours, 30.5x32 Tires Approx. 50%, Less than 500 hours on dealer rebuilt engine.

One owner machine. - Item ID12172 - Chris 800-315-9950 x600

SHOW ALL 210â&#x20AC;&#x2122;S

1990 Prentice 210c log loader and 421ctr slasher - Fair to good condition machine is used it has no oil leaks main bearings are tight, stick boom bushing should be replace in the near future but is still in good working condition replaced main pins and bushing in 2009 mounted on astep deck trailer 2001 CTR slasher with a 20 foot log deck machine works fine looking to upgrade - Item ID-12487 - Daren 800-315-9950 x603

210D

1993 Prentice 210 Loader on Trailer - Very clean unit. Works well. Cummins engine. 9355 hours. Bar Saw hydraulics.

Heat and AC. Some cosmetic dents. Great value. - Item ID12289 - Tom 800-315-9950 x604

280

2005 Prentice 280 TMS - Good

For Classifieds Call Your LBX REP at 1-800-315-9950

CORLEYMFG COM

running machine. Hour meter shows less than 5000 hours but owner believes it to have about 7800. Machine serial number is PR59771. Unit has Cummins engine and runs good with no blow-by and has no leaks and is tight Dependable machine that is priced right with the market.

- Item ID-12527 - Tom 800-3159950 x604

384

2004 Prentice 384 TMS Loader Package - 11,145 Hours; CTR 450 Delimber; Recon John Deere engine with less than 200 hours. Runs good.

Working on job today. Good condition. TN - Item ID-12171 Tom 800-315-9950 x604 2005 Prentice 384 with Saw Hookups - 10123 Hours, 2nd owner, This machine is in very good condition and is ready to work!!! - Item ID-12396 - Daren 800-315-9950 x603

620FB

1999 Prentice 620 Harvester - Ponsse processing head; New undercarriage; Engine replaced 1000 hours ago. Very strong machine. Good value.

May 2012 Â&#x201E; 33

1996 John Deere 548G Grapple Skidder

1995 Morbark

Item ID: 12439 Contact: Daren 800.315.9950 Ext. 603

Item ID: 12531 Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com

Wolverine 3-Wheeled Feller Buncher

www.LBXonline.com

Quebec, Canada - Item ID12134 - Tom 800-315-9950 x604

11830 - Michelle 800-315-9950 x603

2003 Morbark 7600 - 2003 Morbark 7600 3200 hours on a Cummins 12-cylinder engine, 1000 horsepower, ran daily, magnetic end pulley, wireless remote, 5X5, 8X8 screens, Twin Disc clutch, tight clutch, new mill rods, balanced mill, new lights, 85%-95% tires, very good value for a horizontal grinder this size! - Item ID-

1983 Mack Cruiseliner w/tail mount 1986 Hood 7000 Series loader - Mack E6-350, 800k+ miles, 9 speed Fuller trans, 20k lb.front axle w/ floats, 44k lb. rears. New in last 2 years - windshield, paint, front rims, tires, batteries, reman transmission, conversion to S-cam brake assemblies on front axle, rear brake shoes,

RECYCLING EQUIPMENT

ROLLING STOCK

34 The Original Lumberman’s Exchange

1987 Morbark 27 WCL Needs motor!

Item ID: 12443 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com air compressor, air dryer, rear suspension w/ trunion, buckets, bushings, truss rods and frame rail, front grille, cab jack pump, recent clutch adjustment, fluids changed and more. Rubber at 75 percent, some minor leaks.

Parts truck available. Hood 7000 loader w/ 22-foot boom, butt grapple and 11k# lift capacity @ 10 feet. New in last 2 years - main boom cylinder, left grapple cylinder, rod ends

(2) ‘98 Valmet 603 3-Wheeled Buncher Item ID: 12525 Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com in right grapple and jib boom cylinders, all other cylinders repacked and/or rebuilt as needed, external filter assembly, valve sections and spools, most swivels and hard/ soft lines. Some minor leaks. will take offers! - Item ID-11796 - Michelle 800-315-9950 x603

ROTOCHOPPER

1997 Rotochopper 166 (New Engine) - Cat 3406 engine with 68 hours rebuilt 2 months ago

by Caterpillar Main frame hour

Visit us online at www.LBXonline.com!

6DIHW\ Safe 'XUDEOH Durable

THE FIREWOOD FACTORY 7KH )LUHZRRG )DFWRU\ ‘06 Tigercat 726E Feller Buncher Item ID: 12529 Contact: Tom 800.315.9950 Ext. 604

Beaver Model 16

4

Made in the USA

www.LBXonline.com meter 3898, New powerfeed and bearings about a year ago, New main bearing on rotor about 8 months ago, Turbo 2 years old, Spare tire/rim.

This Machine is priced to sell quick!!!! - Item ID-12427 - Daren 800-315-9950 x603 1998 Rotochopper 166 with Coloring system - less than 1000 hours on rebuilt Cat 3406 engine, 460hp, 2 sets of screens 2” and 4”, 2 types of hitches pintle and 5th wheel.

This machine is priced well under its market value. - Item ID-12428 - Daren 800-315-9950 x603

SAWMILL

1992 Sanborn sawmill MiniMax - 36” x 20’ log capacity, 40 HP diesel engine, hydraulic power unit, uses 6” wide saw blades, includes (10) saws.

This machine has a log cleaner ahead of the saw mounted on sawmill. - Item ID-12196 - Daren 800-315-9950 x603 1995 Simonds Vertical Circle Saw Leveler - Excellent Condition. Low Hours-3984 Hours. Runs and looks like new. Ball Type KRO-9702.

Serial # 05-9702-1131 Reduce run out with this machine allowing your saws to cut more accurately. Remove all lumps and bumps. Laser readings of the saws flatness are displayed on digital screen. Able to process saws up to 32” diameter and plate thickness up to .150” thick.

Price includes set up and training so you know you will be getting a great machine!

- Item ID-12084 - Tom 800-3159950 x604

COMING SOON els

New Mod

Starting at

8995

$

Optional Features Availale

5HOLDEOH 5HOLDEOH Reliable

&RQYHQLHQFH Convenient

FEATURES: t 1 to 2 plus full cords per hour (128 cubic feet) t Cuts up to 16” diameter and up to 20’ lengths t Splits wood from 12” to 24” lengths t Splitter cycle time 4.5 seconds t PTO driven t Honda Engine GX-630 630cc

Call Toll Free

Nothing Eats Wood Like a Beaver 1-800-569-6813 www.woodbeaver.net | sales@rrsinc.net

1984 Dresser 520B Item ID: 12485 Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com 1998 Meadows #1 Portable Sawmill - Excellent Condition and a complete package: 50 series Detroit power unit; Fully automatic; Cab a/c ; Live deck 30 ft; 1 live off bearer belt; 1 set rolls 2 1/2’ x 30’; (1) 300 gallon air tank; (1) 500 gallon fuel tank; 2 sawdust sweeps; Meadows edger w/ John Deere power unit; Recent updates and minor repairs; Works and runs good w/ lots of extra features. GREAT VALUE! - Item ID-12461 - Tom 800-315-9950 x604 2001 Timber Harvester Grade Resaw System - Capacity 12”x12”x16’, 28” dia all-steel band wheels, 30 HP electric motor, 1-1/2” blade package, Powered rollers, Pop-up cross-over chains, Board seperator, Off-line kicker-type

2009 Tigercat 720E Feller Buncher Item ID: 12530 Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com turner, Push button setworks, Seperate hydraulic power pack for feed works - Item ID-12190 Daren 800-315-9950 x603 2008 Challenger Grinder Model CHSP 200-4090 - Like New Condition. Only 315 hours.

120HP - 3 phase electric motor.

2 sets of screens, 3/4 and 1”.

Photos say it all. Machine runs great. Owner lost contract.

This machine makes great animal bedding. - Item ID-12284 - Tom 800-315-9950 x604

SHAVING EQUIPMENT

2009 Salsco 30" Shaving Mill 1255 Hours, 4 Sets Of Knives, 8 ft. Blower Pipe Extention, C4,4TA Cat Engine, Original Owner, Excellent Condition, Can See Running! - Item ID12182 - Chris 800-315-9950 x600

For Classifieds Call Your LBX REP at 1-800-315-9950

1977 Franklin 132 XL Forwarder Item ID: 12528 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

TIGERCAT

1998 Tigercat 240 Tracked Loader - 9550 Hours. 32’ Reach. Rotobec continuous grapple. Strong Machine.

Works well. New Cummins 6BT engine in last 500 hours. Cab riser for high stacking. Clean cab with AC. - Item ID-12242 Tom 800-315-9950 x604 2004 Tigercat 724D Feller Buncher - Only 2800 CONFIRMED hours. One owner who is a construction contractor that only used this machine on occasion.

New engine installed in 2010.

Tigercat 22” Hot Saw. Shows 44” tires, but will be equipped with 30.5 x 32 tires at 75%.

- Item ID-12496 - Tom 800-315May 2012 35

9950 x604 2006 Tigercat 726E Feller Buncher - Unit has 6900 hours but new meter was recently installed at 6180 hours and only shows 716 hours. Owner has documentation to show true hours of 6900. Has 34” tires at 65%. Equipped with Tigercat 5702 felling head. Machine in very good condition and is ready to work. Unit is tight and dry with plenty of power. - Item ID-12529 - Tom 800-315-9950 x604 2007 Tigercat 234 Loader w/Slasher - Very clean unit with just 4600 hours. Powerful with Cummins 173HP engine. 32’ Reach. Tigercat continuous rotation grapple.

CSI DL4400R reversible sawbuck. Mounted on Pitts trailer. Comfort cab with AC/Heat/Stereo and Satellite Ready. Less than half the price of new and in excellent condition. - Item ID-12347 - Tom 800-315-9950 x604 2007 Tigercat 250 w/2011 Log Max 7000XT - 7500 hours on Tigercat. 700 hours on new 2011 Log Max 7000XT head. New pump for head. 36” Triple Grouser pads on 60% undercarriage. Cummins 6 cyl engine. Smooth and powerful machine. Log Max head can do multi-stem delimbing (see photos). Owner closing down job. Below market price. - Item ID-12366 - Tom 800-315-9950 x604 2007 Tigercat 630C Skidder - Very clean unit. S/N on request. Tires at 60%. 6519 hours. Big capacity grapple.

Tight and ready to work. One owner machine. - Item ID12275 - Tom 800-315-9950 x604 2009 Tigercat 720E Feller Buncher - 5239 Hours on this well maintained machine. Equipped with Tigercat 5603 bunching head with new carbide teeth. 24.5 x 32 tires at 75%. Cummins engine runs strong with no blow by.

Machine is tight and dry. Ready to work today - Item ID12530 - Tom 800-315-9950 x604

TIMBCO

Why? We use only the highest quality nickel alloy steel NEW state of the art CNC milling centers for perfect pocket geometry 100 + years of combined hammering and manufacturing experience Proudly made in the USA Stock to 10 days on standard sizes Nations largest distributor/manufacturer of saws and knives

CALL 800-862-4544 Locations in s Hampden, ME s Meridian, MS s Florence, SC s West Monroe, LA www.usblades.net 36 The Original Lumberman’s Exchange

1994 Timbco 425 Feller Buncher with Bar Saw Head - 9,142 Hours; 28in. Saw head; B Cummins Engine; Accumulator; Tracks need rails and sprockets; No leaks; Runs well; Ready to go and work. - Item ID-12417 Tom 800-315-9950 x604 1995 Timbco 445 with Quadco hotsaw - approx. 9000 hours, New track Drive Motor, Cylinders just packed, Cummins engine, u/c 60%, this machine is in the woods daily - Item ID-12388 - Daren 800-315-9950 x603 1997 Timbco 455EXL Feller Buncher w/Hot Saw Decent machine running today. Approx. 12,800 hours.

Undercarriage at 50%. Quadco 22” High Speed Disc Saw. Running today. Nice Price. - Item ID-12532 - Tom 800315-9950 x604 1999 Timbco 820 Forwarder - Good running condition.

Tires at 80%. 5000 hours. Bunks included. - Item ID12454 - Tom 800-315-9950 x604 2001 Timbco 445D w/Quadco 2800 Saw - Only 4050 hours on this gem! Extremely well maintained. Very Good Condition. Undercarriage at 80%. 360 rotation on head. New 12 tooth disc on saw. Ready to work. - Item ID-12486 - Tom 800-315-9950 x604 2001 Timbco 445D with Quadco Sawhead - 12,560 hours. Runs good. Undercarriage 50%. 540 degree non continuous rotation on upper. Quadco 22” saw with continuous rotation. About 3000 hours on rebuilt engine. Areas to repair: some cracked track pads, 2 or 3 cracks in lower carbody that were welded, and may need new seal on one of the pumps. Great value. - Item ID-12288 - Tom 800-315-9950 x604 2003 TimberPro Model TS 620 Six-Wheeled Grapple Skidder - 4990 hours, Cummins motor, 6WD. Has 400 hours on rebuilt engine, New ECM; New drive pump; Visit us online at www.LBXonline.com!

HEAVY DUTY FORKS AT BIG SAVINGS &"&$'š i]^X` m &%š l^YZ m )-š adc\ # # # # # # # # # # # # # # # # # # # # # # # # '!+%%#%% eV^g 'š i]^X` m +š l^YZ m )-š adc\ # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # -(*#%% eV^g '"&$'š i]^X` m +š l^YZ m )-š adc\ Hjgeajh # # # # # # # # # # # # # # # # # # &!&%%#%% eV^g '"&$'š i]^X` m +š l^YZ m )-š adc\ # # # # # # # # # # # # # # # # # # # # # # # # # # &!'%*#%% eV^g '"&$'š i]^X` m +š l^YZ m +%š adc\ # # # # # # # # # # # # # # # # # # # # # # # # # # &!(+*#%% eV^g '"($)š i]^X` m +š l^YZ m ,'š adc\ # # # # # # # # # # # # # # # # # # # # # # # # '!*%%#%% eV^g (š i]^X` m ,š l^YZ m +%š adc\ # # # # # # # # # # # # # # # # # # # # # # # # '!).*#%% eV^g (š i]^X` m ,š l^YZ m ,'š adc\# # # # # # # # # # # # # # # # # # # # # '!-'*#%% eV^g (š i]^X` m ,š l^YZ m .+š adc\ # # # # # # # # # # # # # # # # # (!*(%#%% eV^g

2009 Risley Eclipse R300 Mulcher Item ID: 12534 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

Above forks have capacities from 12,000 lbs. to 30,000 lbs. per pair. ("&$'š i]^X` m -š l^YZ m +%š adc\ # # # # # # # # (!*.*#%% eV^g ("&$'š i]^X` m -š l^YZ m ,'š adc\ # # # # # # # # (!..%#%% eV^g ("&$'š i]^X` m -š l^YZ m .+š adc\ # # # # # # # # *!%'*#%% eV^g Also, 4â&#x20AC;?, 5â&#x20AC;?, 6â&#x20AC;? thick forks to 168â&#x20AC;? long.

N IN STOCK N 3!-% $!9 3()0-%.4 N ,%4 53 15/4% 9/52

30%#)!, $%3)'. &/2+3 6%29 #/-0%4)4)6% 02)#).'

Franklin Skidder 170PT Item ID: 12377 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com New tires. Excellent condition; Great Value. Perfect for long hauls or handling big loads.

Rear bogey tracks included.

- Item ID-12254 - Tom 800-3159950 x604 2008 Timbco/Valmet 445FXL with Quadco 22â&#x20AC;? Saw Head - Latest Model of Tracked Feller Buncher from Valmet with Heavier Komatsu undercarriage. 5300 hours.

Excellent condition. 28â&#x20AC;? double grousers. Leveling cab. 360 degree rotator on Quadco 22â&#x20AC;? saw head gives great flexibility in production.

Includes $18,000 in parts for rebuilding undercarriage.

Customer selling due to job changes. Great value! - Item ID12119 - Tom 800-315-9950 x604 Timbco Fellerbuncher - 2000, Model 425D, 8.3 Cummins Engine, approx. 7400 hours,U.C. New Drive Motors just installed. Like New, Timbco Bar Saw W/40 Degree Rotate with less than 1000 hours on it, Leveling System And Swing System Tight. Very Good Machine, Can Be Seen Working! - Item ID-12155 - Chris

-ADE FROM ONE PIECE OF STEEL NOT WELDED 1UALITY RECOGNIZED WORLD WIDE

BAY EQUIPMENT CO. / (616) 392-1811 0 / "/8 (/,,!.$ -)#( s &!8

iÂ&#x201C;>Â&#x2C6;Â?\Ă&#x160;L>Ă&#x17E;°i¾°VÂ&#x153;J}Â&#x201C;>Â&#x2C6;Â?°VÂ&#x153;Â&#x201C;Ă&#x160;UĂ&#x160;Ă&#x153;Ă&#x153;Ă&#x153;°L>Ă&#x17E;iÂľĂ&#x2022;Â&#x2C6;ÂŤÂ&#x201C;iÂ&#x2DC;Ă&#x152;VÂ&#x153;°VÂ&#x153;Â&#x201C;

2005 Prentice 280 TMS Item ID: 12527 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com 800-315-9950 x600

TIMBER KING

2004 Timberking TK560 Loader with CTR450 Delimber - 7200 hours, new knives in delimber, very tight and dry machine.

WOODS READY!! - Item ID12483 - Daren 800-315-9950 x603

TIMBERJACK

1985 Timberjack 230 Cable Skidder - Still a strong working machine. Detroit 3-53 recently rebuilt. 28L tires at 30 - 40%, PLUS 2 spare axles, 3 spare tires & riims, and a spare transfer case! Winch pulls strong. Excellent value! - Item

â&#x20AC;&#x2DC;06 CAT M318 MH Great Yard Machine!

Item ID: 12520 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com ID-12272 - Tom 800-315-9950 x604 1999 Timberjack 735 Shovel Logger - Ugly but very good machine. Bank Repo. Has sat idle due to court settlement and now can be sold free and clear. 75% undercarriage. Runs well. Low hours. GREAT PRICE! - Item ID-12311 - Tom 800-3159950 x604

SHOW ALL 240â&#x20AC;&#x2122;S

1992 Timberjack 240 Cable Skidder - New drop in 4 Cyl. Cummins engine. New transmission. 23.1 x 26 Tires 80%. Chains 75% good.

For Classifieds Call Your LBX REP at 1-800-315-9950

CAT Excavator Model 235 Item ID: 12371 Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com Gearmatic winch. Just spent $4000 on brakes. Excellent value. FOB: NH - Item ID-12274 - Tom 800-315-9950 x604

380

1978 Timberjack 380 Dual Arch Grapple Skidder w/Winch 2045 hours, tires are 60-70%, pins are tight, Machine is Ready for the WOODS! - Item ID-12513 - Michelle 800-3159950 x603

450B

1988 Timberjack 450B Dual Arch Grapple Skidder w/winch - 2045 hours, 23.1 tires front May 2012 Â&#x201E; 37

The Richmond Show EXPO RICHMOND 2012 Richmond Raceway Complex * Richmond, Virginia Friday May 18 and Saturday May 19, 2012 9:00a.m. until 5:00p.m.

â&#x20AC;&#x2DC;97 Timbco 455EXL Feller Buncher w/ Hot Saw Item ID: 12532 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

The 33rd East Coast Sawmill and Logging Equipment Exposition &%" *)02 )% &'+2%)2+0) 4&0+210#%)02"* 4$(2 % )2 )& *+4$( 0&4+4%$+2'%24" )% 02' 020##4&40$& 2 2*$ 2 )%#4'*1434' 2 2%# % )2% 0)*'4%$ 22 %$,'2"4++2' 4+2% %)' $4' 2'%24$ 0+'24$2 % ) # ' )0 22 30*+02#4332% '2*$ 2)0' )$2' 02 )0 )0(4+')*'4%$2#%)" 103%52 '%2 ' 02 0 %+4'4%$2 %##4&02 1 2 )432 !2 /.-/

%$#4)"*'4%$+254332102"*430 2'%2*332 )0 )0(4+'0)0 24$ 4 4 *3+ $%23*'0)2' *$2 * 2 !2/.-/ 22There is no charge to attend the exposition if you pre-register; there will be a $10.00 charge for those who register on-site.2 2 %)2 # )' 0)2 4$#%)"*'4%$!

30*+02&*332 . 2 /

54332 102 /.-/,+2 3*)(0+'2 &%330&'4%$2 %#2 +*5"433!2 3%((4$(!

14%"*++!2 *330'2 *$ 2 )03*'0 2 "*$ #*&' )4$(2 0 4 "0$'! + 340+2*$ 2+0) 4&0+24$2' 02 *+'0)$2 $4'0 2 '*'0+ 2 0*)3 ..20 414'4$(2&%" *$40+2*$ 2' % +*$ +2%#2#%)0+'2 )% &'+ 4$ +') 2 0% 30254332&%$ 0$02#%)2' 02 ) 2 4& "%$ 2 %5 02$050+'2*$ 2"%+'2* *$&0 2"*& 4$0) !20 4 "0$'2*$ '0& $%3%( 24$2' 024$ +') 254332102%$2 4+ 3* 2 0)025433210 *&)0+2 %#2 *&'4 02 *$ + %$2 "*& 4$0) 2 *$ 2 0 4 "0$' 0"%$+')*'4%$+2% '+4 0!2 3 +2 $ )0 +2%#24$ %%)2 4+ 3* +2%# $052 )% &'+!2"0' % +!2'0& $%3%( 2*$ 2')0$ + 2 *"4$02*$

Co-sponsored by Virginia Polytechnic Institute & State University Cooperative Extension and Virginia Forest Products Association

EXPO RICHMOND 2012

Return by April 9, 2012 to: EXPO RICHMOND 2012 P. O. Box 160 Sandston, VA 23150-0160

Your Name:

Nickname:

Company:

Title:

Item ID: 12376 Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com - Michelle 800-315-9950 x603

VALMET

Address: City:

State:

Telephone:

ZIP:

FAX:

E-mail:

Country (if not USA): PLEASE CHECK ALL CLASSIFICATIONS OF INTEREST: -- (You must check at least one) G Dealer Sales G Paper/Pulp G Other (Please Specify) :

G Sawmilling G Logging G Pallet Production/Recycling G Equipment Manufacturer G Plywood/Panel

Pre-registration allows entrance to the Exposition (May 18 - 19, 2012, 9am-5pm) at no charge. On-site registration is $10.00.

Exhibitors: Please do not use this form. Contact show office for exhibitor registration information.

Additional information is available on the Internet at www.exporichmond.com

%

!# " !"

!:39*8742:"8++:'9:/9+1:46:6/9: %71/4*: 80/*571:!82)526: 569+:46: : &: 4'.27.*:!(9&:6/9:14%:'9,529:6/9:9 )5386857&:#/9:65)80:83:

& :#514% 3:"551:)251.063:'.387933:83:*529:0/4++97-87-:6/47:9(92:'9,529&:#/9:*42 963:/4(9:0/47-91$:0/47-93:65:'.387933:500.2 ,43692$:471:05*)9686857:83:,89209&:#/83:)25-24*:"8++:,50.3:57:/5":65:*4876487:4:3.364874'+9:'.387933:87:6514% 3:*42 96:'%:)25(8187-:4:'289,:8738-/6:8765:,.6.29 0571868573$:)25(8187-:362469-893:65:87029439:9,,9068(97933:471:05*)96868(97933$:471:291.09:05363&:#/9:05.239:83:1938-791:,52:47%579:87(5+(91:"86/:6/9:5)9246857 471:*474-9*976:5,:4:"551:)251.063:'.387933&:#976468(9:4-9714:870+.193:4:-+8*)39:5,:6/9:,.6.29$:3.))+%:0/487:*474-9*976:.)14693$:1830.33857:5,:+947:3.))+% 0/4873:471:9792-%:34(87-3$:3.364874'8+86%:471:*529&: 52:,.26/92:19648+3:471:,52:29-836246857:87,52*46857$:+*)- &+, '% % (*$,$:0576406:!7-89: 89-9+:46:6/9 9)426*976:5,: 551: 089709:471: 52936: 251.063:46: 82-8784:#90/ :#9+9)/579 : : :,4 : : :9 *48+ :4289-9+ (6&91.:: 569 :!7-89: 89-9+ )25(8193:29-836246857:87,52*46857: :,52:6/9:39*8742: : #:,52:6/9:9 )5386857&:-

40% and rears are 50%+/-, Pins are tight, Machine is ready to WORK!! - Item ID-12512 Michelle 800-315-9950 x603 Timberjack 450B single arch grapple skidder w/winch Timberjack 450B single arch grapple skidder w/winch, 1409 hours, tires are at 50% +/-, Center pins are tight, Ready for the WOODS!! - Item ID12511 - Michelle 800-315-9950 x603

Arch Grapple Skidder w/Winch - Cummins engine, 1956 hours, tires are at 50%, center pins are tight, Machine is ready to go to work. - Item ID-12510 Michelle 800-315-9950 x603

1993 Timberjack 450C Dual

1996 Timberjack 610

450C

Franklin Skidder 142

608S

2002 Timberjack 608s with hot saw - approx. 6000 hours, Machine is in very good shape and has been well maintained.

- Item ID-12194 - Daren 800-3159950 x603

38 Â&#x201E; The Original Lumbermanâ&#x20AC;&#x2122;s Exchange

610

Forwarder - Good running unit. Needs Brakes. All else works well. About 12000 hours.23.1X26 tires at 40%; 23.1X26 tires 70% Joystick controls; Manual transmission; Cummins Engine - Item ID12521 - Tom 800-315-9950 x604

660

2000 Timberjack 660 Dual Arch Grapple Skidder w/ Winch Cummins Engine, 6803 hours, Tires are at 50% +/-, center pins are tight, Machine is WOODS ready!! - Item ID-12509

1998 Valmet 603 3-Wheeled Buncher - 6500 hours on total machine but no hours on 4BT3.9 Reman Cummins Engine. Equipped with 18â&#x20AC;?

Waratah High Speed Disc Saw. 28L x 26 Tires at 40% complete with chains. This machine has been extremely well maintained and runs very well.

Hard to find them in this good of condition. Has a twin that is available if you need two units.

- Item ID-12524 - Tom 800-3159950 x604 1998 Valmet 603 3-Wheeled Buncher - Good running machine with about 6620 hours. Owner maintains his equipment to the highest degree and it shows. Complete with Waratah High Speed Disc Saw Head. 28L x 26 Tires with chains at 90%. Just installed new Reman Cummins 4BT3.9 Engine. - Item ID-12525 - Tom 800-315-9950 x604 1998 Valmet 911.1 Harvester - Single Owner machine.

Super Clean and ready to go

Visit us online at www.LBXonline.com!

2008 Prentice 2432 Dual Arch Skidder Item ID: 12536 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

2004 CAT 525B Grapple Skidder Item ID: 12424 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com to work. 10,200 hours. All regular maintenance done consistently. Tires at 75%. Sisu Engine uses less than 4 gal/ hr. Slide Boom design easy to learn and operate. - Item ID12338 - Tom 800-315-9950 x604 2005 Valmet 860.1 8-Wheeled Forwarder - 11,800 hours.

New hydraulic transmission and gear box. Spare pump ($7,000 value) Good running condition. Sisu engine uses 4 gal/hour. 16 ton capacity.

Tracks for front and back.

Front blade. Hood guard. - Item ID-12267 - Tom 800-315-9950 x604 2005 Valmet/Timbco 415 Harvester with 370E Head Very nice unit. 7400 hours.

370E Harvesting head just added 22 months ago and only has 2000 hours. 36” Triple Grouser tracks at 60%. Sisu engine that is very stingy on fuel. 8’ squirt at end of boom for 30’ reach. Reversible fan and auxiliary oil cooler. - Item ID-12266 - Tom 800-315-9950 x604 2008 Valmet 890.3 20 Ton

2008 Mack CHU 633w/Lowboy Trailer Item ID: 12535 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com Forwarder - 7200 Hours. Good Condition. 8-wheeled with Eco Tracks for all bogeys. Best Price on Market! Customer ready to sell. Tires at 50%.

Sisu Engine uses about 4 GPH! Front Blade. Hood Guard. One owner machine who took great care. - Item ID-12263 - Tom 800315-9950 x604 “2010 Valmet 860.4 Forwarder - Incredible opportunity if you are looking for a new forwarder! Only 722 hours.

MFG warranty still applies.

This machine is LOADED including the WEBASTO programmable pre-heater!

Includes 2 sets of Eco Tracks; Blade, and Hood Guard. Owner changing jobs and no longer needs this machine. Save $50,000 off of new machine!

- Item ID-12351 - Tom 800-3159950 x604

VERMEER

2002 Vermeer Horizonal

Clark 664D Cable Skidder Item ID: 12221 Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com Grinder Model HG365 - 2002 Vermeer Horizonal Grinder Model HG365, Cummins Engine, 365 HP, 20” capacity, New belt, New teeth, New floor plates - Item ID-12372 - Daren 800-315-9950 x603

VOLVO

1997 Volvo A25C Articulated Dump Truck - Very good machine with 10,000 hours and one owner. $16,000 of recent service and maintenance by local Volvo Dealer. 6 x 6 all wheel drive capacity. Super Value! - Item ID-12444 - Tom 800-315-9950 x604 2005 Volvo L90E Wheel Loader w Forks & Bkt - 7561 Hours on this very nice woodyard loader. Volvo 119HP engine is stingy on gas. Includes 106” bucket for loading chips or waste. 20.5R25 tires at 80%.

Comfortable cab with AC & Heat. Ready to load today.

- Item ID-12404 - Tom 800-315-

For Classifieds Call Your LBX REP at 1-800-315-9950

1992 JD 643 Shear Feller Buncher Item ID: 12537 Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com 9950 x604 WANTED: USED 3-Wheeled Feller Bunchers - Lumberman’s has many customers who are looking for good used 3 wheeled bunchers like Valmet, Hydro-Ax, Bell, or Franklin.

If you have an old but good running machine you need to sell, give Tom a call at 800-3159950 Ext. 604 to get your top dollar! - Item ID-12502 - Tom 800-315-9950 x604

WHO

1993 WHO P12-63XSHD - 700 HP CAT 3412 Engine, owner used it to grind mulch, comes with misc. parts, Approx.

13000 hours and is working daily. Engine was rebuilt by Cat 4500 hours ago. Owner is selling due to buying a larger machine. This machine won’t last!!! - Item ID-12139 - Daren 800-315-9950 x603 May 2012 39

THE LUMBERMANâ&#x20AC;&#x2122;S EXCHANGE 3RVW 2I¿FH %R[ &ROXPELD 7HQQHVVHH

PRSRT STD. U.S. Postage PAID Permit No. 212 Pulaski, TN

6XSHULRU ILQLVKHG SURGXFW FRQWURO IRU ELRPDVV IXHO FRORUHG PXOFK DQLPDO EHGGLQJ DQG RWKHU ZRRG ILEHU FRPPRGLWLHV

x (OHFWULF RU 'LHVHO x +RUVHSRZHU x 3RUWDEOH 6WDWLRQDU\ RU 7UDFN

7UXVW \RXU ZRRG ILEHU UHVRXUFHV WR WKH ´3HUIHFW ,Q 2QH 3DVVµ 70 DGYDQWDJH

%

N UDF W 'ROO\ 7

1HZ QVSRU 7UD K W L Z

5RWRFKRSSHU ,QF _ :HVW 6WUHHW _ 6W 0DUWLQ 01