February 2019 Lumbermens Magazine

F R E E

E Q U I P M E N T

L I S T I N G S TM

DYNA’s Complete Line Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

GIVES YOU CHOICES!

“Precision Under Pressure”

‘16 Halverson H140 Skidsteer (DEMO)

DYNA SC-12XP

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

20 Years of Building Quality Machines!

Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

From Start Up & Home Owner to Full Production Professionals ‘95 John Deere C6 DYNA has the Quality Construction, Tree Farmer Item ID:and 13920Ease of Powerful Hydraulics Contact: Austin ‘13 KMC 2500 Track Ph: (888)To 401-6367 x703 Operation Fit YOU! Skidder

DYNA SC-15

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

capacity!. Item ID 13421. Sam x702

Your ChoiceBARKO of Size 1994 Barko 160B - Electric & Options knuckleboom, 30' boom, 75hp off onto a conveyor. This is a very

Maximum Log Diameters from continuous 14” – 22” motor, Rotobec well •built processor. Item ID 13820.

hours.

• 13 HPgrapple, Gas –5,000 49original HP Diesel condition.). Item ID Firewood Processor - This is • With or(excellent Without Conveyors 13238. Chris x700 a Chomper Model 16 PDA • Log Deck & Loading Options 1995 Barko 775 B Feller Buncher automatice firewood processor Joystick Hydraulic Levers - or Pumps recently redone.

400 hrs with John Deere power •unit with on injection always started low hours.

Control panel includes • Hydraulic or Manual Saw &pump.

Hold Down good. in good working order. 22in tach, oil pressure, water temp and • Wedge Choices from 2 – 8 Way Sam x702

‘05 Gehl CTL 70

NEW FOR 2019! A Hyd, Deck & a sawdust Itemlifter ID: JW-986495 chute is included Standard!

Contact: J Williams

‘83 John Deere 4850

DYNA SC-16 Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 382

Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

amp gauges. Cuts logs up to 16”.

kohing head. head works great.

manuals and receipts. Purchased

1999 Barko 160D - new engine with

One owner and comes with all

new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

approximately 1500 hours. Hour

TAKE YOUR PICK... meter dont work. The last 2 owners

SC-12, SC-14, SC-15 and SC-16

Handles logs up to 32”. Uses

13HP Honda motor. Manual start

Item ID 13185. Sam x702

Chipper - Cat Under Carriage at

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

DYNA Offers94 Barko a Processor fit 275 - Excellentto value low at hours at 3,500. 5.9 Well maintained. Item ID 13294.

YOUR Productionwith Needs & Budget!

CUMMINS continuous grapple.

Sam x702 Diesel. 7500 Hours. One owner.

2004 Bandit Beast Model 4680 -

Runs Great!. Item ID 13740. Sam

Call processor For More Information x702 3412 Caterpillar Diesel engine homemade with a 10’ tollHas free: 1.888.820.3962 BELL with 850 HP. 5300 hrs. Mill in log deck. a hydraulic grapple, www.dyna-products.com 231.734.4433 1990 Bell Super T - This Bell has chain local: and kicker that all runs off good condition. Just finished 10 rate may basedengine. upon logLever size, fax: 231.734.3681 a brand newvary Duetz Acre clearing job, ready to work!*Production of a 4 cylinder Mercedes power quality, power source used and operator skill.

8440 Statesaw Road, Millington, 48746 control, 33” bar, pump and tranny RemoteMI control.

Big production unit. Has a 4’ chain that kicks

Lumbermens™  since 1986

❘

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

UNIVERSAL REFINER NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

C

The Tree that Started it All!

O

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

R

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

P

Hot Springs, Arkansas www.arkloggers.com

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept MID-ATLANTIC

LOGGING & BIOMASS EXPO

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

has been rebuilt, it has a 24foot in

O

N

with 44 inch wheels, and all the

Thurs, 7 Sept - Sat, 9 Sept

MARKETING DIRECTOR

10 hours on this machine since it feed deck 20 foot out feed deck

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

72ND ANNUAL GREAT LAKES O LOGGING R& HEAVY A T I EQUIPMENT EXPO

PUBLISHER

ADVERTISING SALES

BANDMILLS & HEADSAWS

bells and whistles, its a production

machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours

TheDESIGN H.A.W.G. is unbelievably simple, durable The R-MAG is a portable wood wastecomputer grinder on the mill, electronic Set DIRECTOR THE PAUL BUNYAN SHOW Donna Heninger and fast, yet it will grind almost anything and Fri,that can be used in many areas of recycling. works,1 1/2" or 2" band, 22ft. track 6 Oct - Sun, 8 Oct Catgrind 3406 140KW Genset, 12,400 Cambridge, EQUIPMENT REPS product in just one pass... make a finished They canOhio easily and safely lawn clippings, Sam Wall www.ohioforest.org hours ready to run. Item ID 13434. even chips.

Is ideal for grinding: Asphalt, leaves, land clearing, construction/demolition (888) pulp 401-6367 ext. 702 Sam x702 sam@lumbermens.co Shingles, Construction Waste, Green Waste, waste logging slash, stumps, log yard waste, CARRIAGES & DRIVES Austin Woods Stumps, Difficult/Dirty Material, Tropical railroad ties, storm waste, tropical (palm and 2010 Cardinal HD Carriage (888) 401-6367 ext. 703 austin@lumbermens.co Waste (Palm & Palmetto), etc. palmetto) waste etc.

Carriages (Sawmill) - Cardinal

** INFO LINK**

MAILING ADDRESS

Carriage line it includes carriage

800-277-8068 B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

UNIVERSAL REFINER The Paul Bunyan Show ......... 39 Machinery ...................... 3 Grinders/Shredders TheHahn BEST Industrial Hurst Industrial ..... 10 onBoiler the.............................

Planet 14forThomas over 35Controls years.

P . O . B O X 1Lignomat 5 1 .................................

• M O24 NWoodMizer T E S................................

A N O ,l Wwww.BakerProducts.net A 98563 800.S48.6914 I S73.663.7711

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 3

“Precision Under Pressure”

2 UPCOMING AUCTIONS!

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

46th ANNUAL FORESTRY AUCTION

MARCH 19-22 ‘93 Barko 180B

MONTGOMERY, ALABAMA Item ID: 14077

‘16 Halverson H140 Skidsteer (DEMO)

Contact: Austin Ph: (888) 401-6367 x703

Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

2016 TIGERCAT 720E

2011 CATERPILLAR 966K

2016 CAT D5K2 LGP, 919 HOURS

2016 TIGERCAT T250D

TIGERCAT 240

‘95 John Deere C6 Tree Farmer (7) TIGERCAT 234

‘13 KMC 2500 Track Skidder 2014 JOHN DEERE 748H (4) TIGERAT 620C

CAT 563C

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

BARKO

ABSOLUTE

well built processor. Item ID 13820.

2013 KENWORTH W900

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

(2) 2016 CAT 930M, LESS (3) 2014 PETERBILT 389 (7) 5,000 2018-2019 KENWORTH grapple, original hours.

Sam x702 THAN 438 Firewood HOURS Processor - This GLIDERS W900L, HEAVY SPECS (excellent condition.). Item ID is a Chomper Model 16 PDA

13238. Chris x700

with John Deere power unit with

- Pumps recently redone. 400 hrs

amp gauges. Cuts logs up to 16”.

kohing head. head works great.

manuals and receipts. Purchased

1999 Barko 160D - new engine with

Gehl CTL AUCTION 70 ONE‘05OWNER 1995 Barko 775 B Feller Buncher automatice FEATURING firewood processor HUNDREDS OF LATE

APRIL 2019 ‘83 John Deere STATESBORO, 4850 Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

GEORGIA

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

MODEL CHIP VANS, DAY CABS, on injection pump. always started low hours. Control panel includes AND MACHINES. good. in good working order. 22in tach, oil pressure, waterFORESTRY temp and One owner and comes with all

new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

3475 ASHLEY ROAD, MONTGOMERY, ALABAMA 36108

homemade processor with a 10’

log deck. Has a hydraulic grapple,

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

(334) 264-3265chain and kicker that all runs off good condition. Just finished 10 2010 Shop Built Wood Processor w wMercedes w. j m wpower o o d . c oAcre m clearing job, ready to work!

262-0370 - It(334) has a 353 Detroit diesel, 40 of a 4 cylinder FAX: (334) 269-6990unit. Has a 4’ chain saw that kicks

inch insert tooth circle saw, 30 foot  Issue 364 382

TIGERCAT 240

capacity!. Item ID 13421. Sam x702

off onto a conveyor. This is a very

2013 JOHN DEERE 748H

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Lumbermens™  since 1986

❘

Item ID 13185. Sam x702

approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam

800-447-7085 x702

BELL

1990 Bell Super T - This Bell has

a brand new Duetz engine. Lever

control, bar, (J.D. pump tranny Remote control.

Big1137 production AL Lic. (Bryant Wood, Auctioneer) AL 33” Lic. 1791 Gray,and Auctioneer)

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

TM

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

TA B LSOUTHWEST E OF C O N T E NBANDMILLS T S & HEADSAWS FOREST PRODUCTS EXPO SUBSCRIPTION: Lumbermens™, a trade newspaper for the The Tree logging, sawmilling, pallet manufacturing, and secondary wood manufacturing is free within the United States to thatindustry, Started qualifying manufacturers and industry suppliers. Please limit it All! your subscription to one free copy per company or mill location.

Danckaert Band Resaw - Roughly

Fri, 25 August - Sat, 26 August

10 hours on this machine since it D E P A R T M Ehas N TS been rebuilt, it has a 24foot in

Hot Springs, Arkansas www.arkloggers.com

feed deck 20 foot out feed deck 72ND ANNUAL GREAT LAKES CHANGE OF ADDRESS: Send address to Lumbermens™ with 44 inch wheels, Book and all the blades and 1 spare LOGGING 36" blade), Pulleys on Bearing . Parts and Since 1986, Lumbermens has changes & HEAVY EQUIPMENT EXPO Magazine, P.O. 1916, Columbia, When possible, published a Box monthly circular TN 38402. short pop-up transfer to edger, where to order included.

Item ID Thurs, 7 Sept Sat, 9 Sept bells and whistles, its a production please include an old address label.

Free Equipment Listings......................... 6

Deals of the Month................................ 16

reaching sawmills, loggers, Escanaba, Michigan belted rollcase to clear slabs and 12846. Sam x702 machine, with air strain conveyers pallet makers, recyclers and REPRODUCTION AND RESPONSIBILITY: Advertisers are CHIPPERS cuts from sawline, log stop and that go up and down, with airbags, industrial responsible woodworking for the contents plants and claims of their advertising.

LOGGING Precision & BIOMASS 58 Chip Pac - Single chute drop logs MID-ATLANTIC onto carriage, Lumbermens™ accepts no responsibility forloader their claims.to No part worldwide. it includes two sets of Mcdonough

Ad Directory............................................ 38

EST

Fri, 15 Sept Sept of this publication may be reproduced or transmitted in any form or log turner under heavy duty log - Sat, 16 loading system,. Item ID 12764.

PUBLISHER pressure guides. Top Casting wheel by any means, electronic or mechanical, including photocopying, Selma, North Carolina stop and loader to deal with big Sam x702 Woods Publishing recording or any information storage retrieval system, without www.midatlantic-logging-biomass­ is supported on both sides. This onto carriage and track and Trelan Chipper - This is a remote MID-ATLANTIC permission of Lumbermens™.

Negatives,logs artwork, and other ADVERTISING SALES expo.com/ LOGGING & BIOMASS EXPO an extremely accurate machine frame. Significant new spare parts chipper that is has been totally rebuilt items submitted publication in Lumbermens™ are the MorrisforWoods property of advertisers.

Lumbermens ™ owns material typeset in ve1y good condition, Cuts 130 to be negotiated separately .

Item ID with about 840 hours except for the (888) 401-6367 ext. 704 KENTUCKY WOOD EXPO and/or designed by Lumbermens ™ and reserves the right to its of morris@lumbermens.co 13198. Sam x702 V-12 Caterpillar power unit.

New feet a minute also has CLT presses.

Fri, 15 Sept - Sat, 16 Sept use outside of Lumbermens™. Lumbermens™ will exercise every the Manual Four Head Block -Lexington, ManualKentucky clutches, disc, bearing, liners and MARKETING DIRECTOR precaution in writing, designing, and printing material contained Item ID 13876. Austin x703 Williams within. We John shall not be liable for omissions or typographical Four Head Block Mounted on custom chute.

23” in opening http://www.kfia.org/ S & W 125 Band Mill with and errors.(888) 401-6367 ext. 701 all steel carriage. Husk. Manual V-12 Cat with 750-800 hp rating.

KentuckyWoodExpo.aspx

1986

LIST

SELL

EXCHANGE

BUY

SAVE

lS Month om ApriL

oodmIzer LT 40 j@lumbermens.co DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

The Tree MAILING ADDRESS

Caterpillar generator - Low hours

on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

EquipmEnt REpREsEntativEs EST 1986 Cambridge, Ohio EQUIPMENT REPRESENTATIVES cAll uS todAy foR All youR uSed www.ohioforest.org

works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434. needS! CALL US equiPMent TODAY FOR ALL YOUR USED EQUIPMENT SamNEEDS! x702

FREE EQUIPMENTlistings!

LISTINGS!2010 CALL –HD Carriage fREE EquipmEnt Call – Cardinal INFO(888) LINK** (888) 401-6367Carriages (Sawmill) - Cardinal 401-6367

**

CARRIAGES & DRIVES

LIST

SELL

EXCHANGE

BUY

SAVE

Carriage line it includes carriage

Ted Schultz

Walker Woods Sam B & B Mfg. ...............................

18 Wall M&F Gauge ............................. 28 P.O. Box 1916 with onboard log turners, carriage that Started AD Sales Columbia, TN 38402-1916 (888)33401-6367 (888) 401-6367 ST SELL EXCHANGE Y ..............................

S A V E (888) B.BH.UPayne 16 401-6367 Meadows Mill, Inc. ................ drive, hyd pac for carriage, (888) 401-6367 d: 14061 (888) 401-6367 it All! Ext. 701 Ext. 707 Ext. 702 t: Austin x703 Baker ...................................... 5, 7 Menominee Saw ..................... 29 sawyers cab, computer controls, AD Ext. 704 ESUBMISSIONS S T 1986 Since 1986, Lumbermens™ has May abemonthly sent to­circular published JoHn deere morris@lumbermens.co reaching sawmills, loggers, pallet 548G3 makers, recyclers and industrial POSTMASTER woodworking plants worldwide.

Send address changes to: Lumberman's Exchange P.O. Box 1916 PUBLISHER Columbia, TN 38402 Woods Publishing

The Lumberman's Exchange is DESIGN DIRECTOR published monthly

by Woods Ted Monnin Publishing, P.O. Box 1916, Columbia, TN 38402.

All rights ed PRice MAILING ADDRESS reserved. All editorial/ advertorial d: 14021 P.O. Box 1916 submissions are used at the t: Sam x702 Columbia, TN 38402-1916 discretion of the publisher and may (888) 401-6367 be edited for purposes of clarity and space. Although all efforts have AD SUBMISSIONS been made to ensure accuracy of May be sent to— content submitted by advertisers morris@lumbermensco.com and writers, the Lumberman's Exchange, its principles and POSTMASTER associates, are not held liable for Send address Reproduction, changes to: errors or omissions.

Lumbermens™ Magazine in whole or part, is prohibited with­ Box 1916 out writtenP.O. consent. d: 14061 Columbia, TN 38402 ©2017 Woods Publishing t: J Williams x701

AbTeK 344b

Morris Woods

sam@lumbermensco.com

walker@lumbermensco.com

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

48" bottom saw and 36" top saw

STACKING RAC

chris Woods Morris 40 Woods, Ad Sales CW Mill-ArmorHog .............. 17 Rotochopper............................

Phone: (888) 401-6367 Phone: (888) 401-6367 CW Mill-Hogzilla 15 Row Electric ............................

20 ext.

700 ................... ext.

704 Joe Ferrazzano Austin Woods Chris Woods Mark Laxton chris@lumbermens.co morris@lumbermens.co (888) 401-6367 Dyna401-6367 Products ........................

35 Sawmill Exchange ..................

11 (888) (888) 401-6367 (888) 401-6367

Ext. 703 Ext. 700 Ext. 709 Empire Hydraulics ...................

8 Select Sawmill .........................

19

chris@lumbermensco.com

austin@lumbermensco.com

Great Lakes Mfg. .................... 34

joe@lumbermensco.com Smith Sawmill ...........................

4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

- USED FORESTRY EQUIPMENT FOR SALE  SELL YOUR EQUIPMENT TODAY TODAY ❘ SALE ❘ l§ Austin Woods Phone: (888) 401-6367

r classifieds all toDay

teds@lumbermensco.com

Bell's Machining ..................... 27

morris@lumbermensco.com

Ext. 708

mark@lumbermensco.com

www.BakerProducts.net 800.S48.6914 I S73.663.7711

 24/7 SUPPORT  (888) 401-MENS NO. 5 401-MENS 0 SUPPORT ❘ L! Sam Wall Phone: (888) 401-6367

“Precision Under Pressure”

TM

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO)

‘93 Barko 180B Item ID: 14077

FREE EQUIPMENT LISTINGS, CALL (888) Contact: 401-MENS Austin BANDMILLS & HEADSAWS

carriage, heavy duty log turner under log stop and loader to deal with big logs onto carriage and track and frame.

Item ID 13198. Sam x702

DANCKAERT BAND RESAW Roughly 10 hours on this machine since it has been rebuilt, it has a 24 foot in feed CHIPPERS deck 20 foot out feed deck with PRECISION 58 CHIP PAC 44 inch wheels, and all the bells Single chute loading system. and whistles, its a production Item ID 12764. Sam x702 machine, with air strain conveyers COMPLETE SAWMILLS that go up and down, with airbags, it includes two sets of 2006 WOODMIZER LT300 Mcdonough pressure guides. Top This mill is currently running, Casting wheel is supported on and includes the sawmill, and both sides. This is an extremely cab. An incline conveyers, a accurate machine in very good transfer table and two sets condition, Cuts 130 feet a minute of roller tables. This mill saws 13428 also has CLTVictory presses.Ln. // PO Box 124 a million board feet or more Adams Center, NY 13606 of walnut every year. Max log Item ID 13876.

Austin x703 CARRIAGES & DRIVES diameter 36in, Max Width of cut 25in, The width of the 2010 CARDINAL HD band is 1 1/2 Inches. Video of CARRIAGE CARRIAGES Cardinal Carriage line it includes it operating is available, and carriage with onboard log can be sent upon request.

Item ID 13892. Austin x703 turners, carriage drive, hyd DRY KILNS pac for carriage, sawyers cab, computer controls, cabinet with MEC 12 X 38 ‘05 Gehl CTL 70DRYER electronic drives for carriage TRIPLE PASS DRUM Item ID:with JW-986495 knees, husk including 48” Comes trunnions, drum Contact: J Williams bottom saw and 36” top saw, drive, fan and cyclone.

Ph: (888) 401-6367 x701 short pop-up transfer to edger, Item ID 13925.

Austin x703 ‘83 John Deere belted rollcase to clear slabs and cuts from sawline, log stop 4850 MEC 12 X 42 chain conveyer, way splitter, on and loader to drop logs onto TRIPLE PASS8DRUM DRYER Item ID: 14073 20,000lb goose neck trailer.

Item ID 12 x 42 Mec triple pass Drum Contact: Austin Dryer, comes with trunnions.

13916. Austin x703 Ph: (888) 401-6367 x703 Item ID Portable 13924. Austin x703 Best Value Log Splitter

with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 382

DYNAMIC CHIPPERS - Small manufacturer in PA has

2004 JCB 441 WHEEL LOADER made the best valued log splitter.

3,509 hours on this machine, Handles logs up to Uses I have everything works as32”. it should.

13HP Honda available motor. Manual start many videos of it running, and can be sent upon request. but electronic option is available.

Item 13888.

Austin x703 Has LogID Lift.

Uses 4-way wedge adjustable to single two way. Great

2008 DYNAMIC 585 CHIPPER Value!

ID 12062.

Samcone x702 This isPA.a Item 2008 dynamic Firewood Processor a head chipper with- This 1700is hours, in very good condition.

Easily homemade processor with a 10’ produces high quality chips with log deck. Has a hydraulic grapple, patented ‘Cone’ drum design. chain and kicker that all runs off Can easily load 42’ vans and of a 4 cylinder produce 6 - 8Mercedes loads perpower day. unit.

Has 4’ chain Austin saw thatx703 kicks Item IDa 13882.

Lumbermens™  since 1986

❘

Item ID: JW-909632 FIREWOOD PROCESSORS Contact: J Williams 2010401-6367 SHOP BUILT Ph: (888) x701 WOOD PROCESSOR It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot chain conveyer, 8 way splitter, on 20,000lb goose neck trailer.

Item ID 13916. Austin x703 FIREWOOD PROCESSOR This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, and ‘13 KMC 2500chain Track kicker that all runs off of a 4 Skidder cylinder Mercedes power unit.

Has a 4’ chain saw that kicks off Item ID: 14078 onto a conveyor.

Contact: Austin This is a very well Ph: built (888)processor.

401-6367 x703 Item ID 13820. Sam x702 PROCESSOR off FIREWOOD onto a conveyor.

This is a very

This built is a Chomper 1613820.

PDA well processor.Model Item ID automatice firewood processor with John Deere power unit Firewood - This is panel with lowProcessor hours. Control aincludes Chomper Model 16 tach, oilPDApressure, water temp and amp gauges. automatice firewood processor CutsJohn logsDeere up topower 16”. One with unit owner with and comes with all manuals and low hours. Control panel includes receipts. Purchased new for tach, oil pressure, water temp and $32,500. amp gauges.

Cuts logs up x702 to 16”.

Item ID 13865.

Sam Sam x702

LOGGING One owner and EQUIPMENT comes with all manuals andBANDIT receipts. Purchased

2004 BANDIT BEAST new for $32,500.

Item ID 13865.

Sam x702 MODEL 4680

3412LOGGING Caterpillar EQUIPMENT Diesel engine with 850 HP. 5300 hrs. Mill in good BANDIT condition. Just finished 10 Acre 1999 Bandit 1900 Disc clearing job, readyTracked to work!

Remote control. Big production capacity!

Chipper - Cat Under Carriage at Item ID 13421.

Sam x702 50% or better. 475 hp Cummins BARKO Diesel. 7500 Hours. One owner.

1994 BARKO Well maintained.

Item 160B ID 13294.

Electric knuckleboom, 30’ boom, 75hp motor, Rotobec 2004 Bandit Beast Model 4680origicontinuous grapple, 5,000 3412 Caterpillar Dieselcondition). engine nal hours. (excellent Item Chris with 850ID HP.13238.

5300 hrs.

Mill x700 in Sam x702

BELL good condition. Just finished 10

1990 BELL SUPER T Acre clearing job, ready to work!

This Bell has a brand new Duetz engine. Lever control, 33” bar,

Remote control. Big production

 List  seLL  exchange  buy  save

Ph: (888) 401-6367 x703 pump and tranny has been rebuilt not long ago. Hour meter is inop.

New paint. Runs perfect. Has heat and air, it just needs to be fixed.

Item ID 13896. Sam x702

1993 BELL SUPER T Good running condition. 33” Bar Saw. Tires at 50%. Deutz ‘95 John Deere C6 engine.

Hour meter broken.

Item ID 13543.

Sam x702 Tree Farmer

ItemBELL ID: 13920 TREE CUTTER Contact: Austin Around 1000 hours on the Ph: (888) 401-6367 x703 machine. New air cooled motor

only about 300 hours. Rebuilt dangling head. Several bars capacity!.

ItemMachine ID 13421. Sam and chains. camex702 off the job in February and is field BARKO ready.

1994 Barko 160B - Electric Item ID 13943. Austin x703 knuckleboom, 30' boom, 75hp CASE motor, Rotobec continuous

2006 CASE 440 SKID LOADER

grapple, 5,000 original hours. this With only 871 hours, (excellent machine condition.). starts, Item runs,ID and

operates like new. I have many 13238.

Chris x700 videos available and can be sent 1995 Barko 775 B Feller Buncher upon request.

Item ID 13886. Austin x703

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order.

22in 99’ CASE 850G LONG TRACK kohing head. DOZER head works great.

One ID owner machine, Item 13185. Sam x702

only 3300 original hours, has never 1999 Barko 160D - new engine with been used in the woods, it has approximately 1500 back, hours. Hour a ripper on the original meter work. The last 2carriage owners pads, dont and chains, Under is new along on have only usedwith it to new load rollers trucks or the bottom, and new sprockets. as a backup as needed. Has a CTR Item ID 13909. Austin x703 delimber, grapple has been rebuilt.

CATERPILLAR Boom cylinders have minor leaks.

1994 CATERPILLAR 320 Dry machine that is in good 94 Barko 275 condition for- Excellent the year.value The stick and low bucket cylinder have with at hours at 3,500.

5.9 been repacked. continuous It has a thumb CUMMINS grapple.and bucket on it, also has a 230 Runs Great!. Item ID 13740. Sam Waratah processing head that x702 can be sold with it. Hours are around 19k, BELL motor has been replaced a couple back.

1990 Bell Super T - Thisyears Bell has is working daily.Lever aMachine brand new Duetz engine.

Item ID 13936. Austin x703 control, 33” bar, pump and tranny Item ID 13694. Sam x702

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 7

40

used

ra

02

00

t

02

r

y

wer

w

ill

1994 CATERPILLAR D4 HI Phone 1998 CATERPILLAR 515 TRACK WITH GRAPPLE 315.284.4126 Grapple with winch, no heat or This is an extremely low Faxair. Open cab skidder with 9800 315.849.2045 hour dozer/skidder with onlyWebsite hours. Tires are 28L’s, rear 90% www.empirehyd.com 2800 actual hours. Comes and fronts are 30% with new Email with new 30” and chain. bear paws chains.

“Precision Underpads Pressure” info@empirehyd.com Undercarriage is still in excellent Item ID 13801. Sam x702 shape. Fixed grapple and no winch.

2005 CATERPILLAR 525B Item ID 13932. Sam x702 This is a dual arch skidder with winch. Very low hour skidder 1996 CAT 214 MOBILE with 7900 frame hours and EXCAVATOR only 63 hours on a new engine. with 36’ magnet 3 tons steel Continuous grapple, tires are shear. low hrs! All hard tires, 30.5’s @ 70%. This is a really 4 outriggers ideal for scrap nice skidder for the price. business. It also has 48’ swavel Item ID 13816. Sam x702 bucket for street ditch clean up.

Item ID 13441. Sam x702

PIPER’S Saw Shop

2007 CATERPILLAR D6N LGP DOZER ENCLOSED CAB Overall: Cab Heat & AC, 150HP Cat C6.6L, 90% Undercarriage, GPS Ready, Sweeps & Rear Screen, 13’6” PAT Blade, 39,500 LBS, Hours: 7,867 Horsepower: 150 S/N: ALY03028.

Item ID 13567. Chris x700

‘16 Halverson H140 2000 CAT 515 GRAPPLE Skidsteer (DEMO)

SKIDDER Item ID: JW-909632 One Owner Runs great! Is it an Contact: J Williams excellent condition.

Rubber is Ph: (888) 401-6367 x701 around 75% Has new Hydraulic pump and Charge pump.

Item ID 13616. Sam x702

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

5 7 0 6 • 5 4 8 • 800

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Promotional Pricing Offer

Firewood Processor - This is

Simonds Red Streak Hard Back ‘05 Gehl CTL 70 1-1/4” x .042 x 3/4” or 7/8” Item ID: JW-986495 L im it e d Length 13’2” Contact: J Williams

im e Ph: (888) 401-6367Tx701

‘83 John Deere 4850 Tell us you saw it here!

$14.71 $14.27 each

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot

O n ly

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

good condition. Just finished 10

Acre clearing job, ready to work!

Remote control. Big production

 Issue 364 1986 382 Lumbermens List exchange it buy  to save arch with winch.

Low hours on ™  since Cat D5B Dozer❘ - Cat D5B s/n seLL  come hook up to and go your this skidder at only 3700. These

22X380, direct drive, EROPS,

grapple, 5,000 original hours.

1995 JOHN DEERE C6 TREE FARMER

(excellent condition.).

Item5.9 IDCumOnly 20 hours on a new

mins engine.

The whole center 13238.

Chris x700 has been and line bolt re1995 Barkofixed, 775 B Feller Buncher

1999 Barko 160D - new engine with

One owner and comes with all

50% or better. 475 hp Cummins

Value! PA. Item ID 12062. Sam x702

motor, Rotobec continuous

manuals and receipts. Purchased

tach, oil pressure, water temp and

but electronic option is available.

adjustable to single two way. Great

EXPORT LOG DEBARKING LINE Reconditioned 35 Nicholson ‘95debarker, John Deere C6hour A-5 cab, infeed glass rolls, log dischage belt with Tree Farmer side log kickers. Call 208-451Itemfor ID: 13920$279,000 0365 details.

Contact: Austin JOHN DEERE Ph: (888) 401-6367 x703 ‘92 JOHN DEERE 590 D CUTTER Will need pads in the future, capacity!.

13421.are Samabout x702 sprocketsItem andID rails 85%, it has BARKO a 4cyl JD motor. It has aBarko Rotnee dangle hd. w/ a bar 1994 160B - Electric saw and a spare idler. knuckleboom, 30' boom, 75hp Item ID 13612. Chris x700

amp gauges. Cuts logs up to 16”.

low hours. Control panel includes

1999 Bandit 1900 Tracked Disc

Has Log Lift. Uses 4-way wedge

Item ID: 14077 EARLY Austin 70’S CLARK 664 Contact: CABLE SKIDDER Ph: (888) 401-6367 x703 some center slack, needs front tires, comes with a spare tire.

Gearmatic 19 winch doesn’t hold good. 453 Detroit power unit.

Item ID 13629. Sam x702

done, transmission is tight, center pins are good. It has a full speed on injection always started tranny, withpump. two reverse, with a good. good working winch.inWorking daily. order. 22in Item head.

ID 13920.

Austingreat. x703 kohing head works

with John Deere power unit with

Handles logs up to 32”. Uses

13HP Honda motor. Manual start

CLARK RANGER 665D Tight and dry machine, rebuilt motor. hour meter broken, It has a 353 Detroit, with grapple, and winch, always fires right up, and runs with no issues.

ItemBarko ID 13748.180B Austin x703 ‘93

JEM

‘13 KMC 2500 Track Skidder

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

CLARK

job site and put it to work to up

- Pumps recently redone. 400 hrs

Item ID 13185. Sam x702

2004 648GIII JOHN DEERE DUEL ARCH SKIDDER approximately hours.

Slick Machine.1500 Runs goodHour motor meter dont work.condition.

The last 2 owners is in top notch Item 13610.

Samtrucks x702or have onlyID used it to load as a backup as needed. Has a CTR

2004 JOHN DEERE 648GIII This machine has 13000 total Boom minor hours cylinders on the have body, withleaks. only Item 13694. Sam x702 new mo3000IDhours on the tor,Barko comes a set value of chains, 94 275with - Excellent working daily. with low at hours at 3,500. 5.9 Item ID 13878. Austin x703 delimber, grapple has been rebuilt.

CUMMINS continuous grapple.

Runs ID 13740.

Sam 2006Great!.

JOHNItem DEERE 700J DOZER

x702 This work horse comes with a

winch, and new BELLundercarriage, it is tight and dry running daily 1990 Bell Super T - & This Bell has with 4500 hours. a brand new Duetz engine. Lever Item ID 13883. Austin x703 control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 9

2006 JOHN DEERE 748GIII Phone welds anywhere.

8700 hours, running daily. 315.284.4126 Item ID 13747. Austin x703 FRANKLIN Item ID 13881. Austin x703 Fax 315.849.2045 Website 1995 FRANKLIN 170 2006 JOHN DEERE www.empirehyd.com Enclosed cab, single arch with a Email FIREWOOD “Precision UnderPROCESSOR Pressure” winch, new paint, 4 brand new info@empirehyd.com This is a Chomper super 14, 23.126 firestone tires, around with a 60hp engine. In very nice 15000 hours. shape. Only 171 hours, comes Item ID 13910. Austin x703 with green chain conveyer. All of the manuals for the engine, and 2003 FRANKLIN Q80 the chopper itself come with it, GRAPPLE SKIDDER as well as all of the electrical 7500 hours, but just 5000 hours schematics. on reman engine. New Radiator; Item ID 13894. Austin x703 New Hydraulic Pump; Comfort cab with good working heat and 2012 JOHN DEERE 548GIII air; Tires at 80%.

Single arch with winch, blade Item ID 12450. Sam x702 extensions, 1 new 28L and 3 @ GRINDMASTER 50%. This is still a new machine SUDDRETH HORIZONTAL with only 3600 hours.

GRINDER Item ID 13780. Sam x702 This is a 60 HP low rpm Horizontal grinder, comes 2009 JOHN DEERE 648H with a blower, and the blower This is a one owner machine, connects to the grinder with every switch works, interior a pipe. It has top and bottom is very clean, radio, heat/ac. infeed rolls. Overall lightly used, Air ride works as it should. in really good shape. Width Victory Ln.Extremely // PO Box 124 Tires13428 are 30.5x32.

Adams Center, NY leaks.

13606 capacity is around 30” maybe clean machine with no even wider.

Cutting edge on blade is Item ID 13889. Austin x703 excellent, with no cracks or

30+ Years Strong!

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

From Price To Performance, We’re A Cord Above The Rest!

 Firewood Processors: 8 Models  Firewood Cleaners  Firewood Conveyors: 12’, 20’ & 30’  Operator’s Cabs ‘95 John Deere  Firewood & Log Grapples  Free DVD C6

Tree Farmer

‘13 KMC 2500 Track Skidder

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

ortable • DePenDable • low Maintenance Item ID:P14078 Contact: Austin capacity!. Item ID 13421. Sam x702 Ph: (888) 401-6367 x703

888-SPLITTER (888-775-4883) 319-986-5525 Local • 2756 Kentucky Ave, MtBARKO Pleasant, IA 1994 Barko 160B - Electric

blockbuster-inc.com knuckleboom, 30' boom, 75hp

off onto a conveyor. This is a very

motor, Rotobec continuous well Item ID 13820.

100 built processor.

WWW.TREETRADER.COM ~ The World’s Sam x702

grapple, 5,000 original hours.

a Chomper Model 16 PDA

13238. Chris x700

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 382

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

Largest W

(excellent condition.). Item ID 1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All! Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants NEW BARKO 495B worldwide.

PUBLISHER

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

LOGGING BIOMASS 2014 JOHN DEEREMID-ATLANTIC 748 2014 CAT & 559C Fri, 15 Sept - Sat, 16 Sept

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR

John Williams 2005 BARKO 395ML (888) 401-6367 ext. 701 j@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

Lexington, Kentucky http://www.kfia.org/ 2009 TIGERCAT 720E 2013 CAT 525C KentuckyWoodExpo.aspx

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods 2014 TIGERCAT 630E (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

2013 JOHN DEERE 643K

2013 BARKO495

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights JEWELL CARRIER reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, 726E in whole2013 or part,TIGERCAT is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co 2018 DELFAB DF703

POSTMASTER

BARKO 595B

2014 TIGERCAT 620E

BARKO 930B 35 Dyna2017 Products ........................

2012 JOHN DEERE 437D11 Sawmill Exchange ..................

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags,

2013 DEERE 643K

it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S&W 125 Band Mill with 2014 JOHN DEERE 753J Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2014 TIGERCAT 620E

2010 Cardinal HD Carriage

Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for

2014 TIGERCAT carriage knees, husk 720E including

48" bottom saw and 36" top saw

STACKING RAC

2015 JOHN DEERE 643L

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 11

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

IntegrIty • PrecIsIon • QualIty • Value

Woodmaster ‘93 Barko 180B

‘16 Halverson H140 Item ID: 14077 Contact: Austin Skidsteer (DEMO) ‘14for Hurdle See why we are your BeSt Source bandsaw3-Hd blades!

Ph: (888) 401-6367 x703 Item ID: JW-909632 Block Sawmill We offer the highest quality welds and our people use the Contact: J Williams Item ID: 13997 Ph:highest (888) 401-6367 x701 level of integrity and precision to give you the best Contact: Austin 2006 CAT 517 bandsaw blades in the business—we ship401-6367 all over the US. Ph: (888) x703 Item ID: 13869Satisfaction always guaranteed!

Contact: Sam Ph: (888) 401-6367 x702

thIn Kerf

W

It Co Ph

Blades ‘95Band Johnsaw Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Item ID: 13920 Contact: AskAustin About Our Ph: Dismanteling (888) 401-6367Blades x703

Firewood Proc.

capacity!.

ID 13421. Sam x702 Item ID:Item 13865

BARKO Contact: Sam

1-888-857-5153

ck Ph:Barko (888)160B 401-6367 x702 Electric Cheut Our Quality • Our 1994 Service • -Our Price O knuckleboom, 30' boom, 75hp off onto a conveyor. This is a very ‘14 Komatsu WA200 well built processor. Item ID 13820.

Loader

Sam x702

‘05 Gehl CTL 70

‘83 John Deere 2000 W900 KW w/ 4850 Rotobec MT27

Item ID: 14073 Heavy Spec Contact: Austin Ph: (888) 401-6367 x703 Item ID: 13993 Contact: Austin Ph:1700 (888) 401-6367 with hours, in very x703 good

condition. Easily produces high hours on thiswith machine, in excellent quality chips patented ‘Cone’

condition.

Item IDeasily 13937.load Austin drum design.

Can 42’ x703 vans and produce 6 - 8 loads per

day. Item ID LIEBHERR 13882. Austin x703 2007 Liebherr A924C Log Handler EDGERS & GANGS

Rubber Saws Tired -Log Brewco TwoLoader.

Brewco13,000 Saws hours.

40’ Reach with two section in excellent condition. Runs great. boom.

LogSam Grapple Item ID60” 13644. x702with continuous rotation.

Fixed Cab FIREWOOD PROCESSORS

RiserShop with Built cab guard 2010 Woodprotection.

Processor Tight and40dry.

-Front It haspush a 353blade.

Detroit diesel,

Item ID: JW-986495 Contact: J Williams ‘04 CAT 953C FrontPh: (888) 401-6367 x701

end Loader

Item ID: 13854 Contact: Sam 20,000lb goose neck trailer. Item ID Ph: (888) 401-6367 x702 chain conveyer, 8 way splitter, on 13916. Austin x703

Best Value Portable Log Splitter trailer. 4-Wheel drive and steering.

- Small manufacturer in PA has Top Quality Would be made the bestmachine. valued log splitter.

great for logs log yard millUses work.

Handles up toor32”.

Item ID 13476.

Sam x702 13HP Honda motor.

Manual start 2011electronic Liebherr option A904 Rubber Tired but is available.

Log Handler.

Liebherr 4 cylinder Has Log Lift. Uses 4-way wedge

engine with adjustable to great singlefuel twoeconomy. way. Great 11,230 PA. hours.

Fixed cab riser.

Value!

Item ID 12062.

SamTwo x702 section boom with 38’ reach.

Firewood Processor - This is aCab protection. 4-Wheel homemade processordrive withand a 10’

steer.

CanHas pullaloaded trailer. log deck. hydraulic grapple, Cleaned, serviced and inspected. chain and kicker that all runs off

Tight and dry and ready power for work. of a 4 cylinder Mercedes Located Baltimore, MD. ID unit.

Hasin a 4’ chain saw thatItem kicks

Cleaned, andsaw, Checked inch insertServiced, tooth circle 30 foot 13477. Sam x702 out for service. Can pull loaded  Issue 364 ❘ 382 Lumbermens™  since 1986  Issue 364

Lumbermens  since 1986

❘

One Owner, low hours!

Firewood Processor - This is Item ID: 14010 aContact: Chomper Model Austin16 PDA automatice processor Ph: (888)firewood 401-6367 x703

with John Deere power unit with

low hours. Control panel includes 2011 Liebherr A924 Rubber Tired tach, oil pressure, water temp and Log Handler. Liebherr 4 cylinder amp gauges. Cuts logs up to 16”. engine with great fuel economy.

One owner and comes with all 11,230 hours. Fixed cab riser. Two manuals and receipts. Purchased Item boom ID: 14011 section with 38’ reach. Cab new for $32,500. Item ID 13865.

Contact:4-Wheel Austindrive and protection.

Sam x702 Ph: (888) 401-6367 x703 steer. Push blade. Can pull loaded

‘06 Western Star Michigan Special

LOGGING EQUIPMENT trailer. Cleaned, serviced and BANDIT

inspected. dry and x702BanditTight 1999 1900 and Tracked Discready for Located Baltimore, 2004work.

Hydro Ax 470in- Carriage This cutter Chipper - Cat Under at MD. Item ID7000 13478. x702 has around It’s a clean 50% or better.

475hours. hpSam Cummins LINK-BELT and tight machine. reason Diesel.

7500 Hours. Only One owner.

1997 Linkbelt 3400 has rebuilt selling is due to an upgrade.

Item Well maintained. Item ID 13294.

Pierce Stroke 36” Pads ID 13846.

SamDelimber. x702 Sam x702 on 60% undercarriage.

5221 hours.

2004 Bandit Hydro Beast Ax 670 - Engine has 2004 Model 4680 Good running condition.

Owner 3412 Diesel engine aboutCaterpillar 500 hours, new saw motor just $30,000 on upgrading with 850 HP. 5300 Mill inowner and spent disc last year. hrs.

Previous

delimber.

Item ID 12992.

Sam x702 good condition.

Just finished 10 had the hydrastats redone.

This

MORBARK Acre job, ready head to work! has aclearing 22” high capacity and is 1987 Morbark 27 WCL NEEDS Remote control.

Big production a very clean machine. Mounted on

MOTOR - Morbark 1000 Knuckle 34’s with 50% tread. Item ID 13828.  List  seLL  exchange  buy  save Sam x702  List  seLL  exchange  buy  save ❘

motor, Rotobec continuous boom loader, 3 knife disc, Newer grapple, 5,000 original hours. discharge chute, New banding (excellent condition.). Item ID around disc, Brakes and tires are 13238. Chris x700 also OK, Everything works well 1995 Barko 775 B Feller Buncher Newer clutch -- with outboard - Pumps recently redone. 400 hrs bearing, Had Cummins KTTA 750 on injection pump. always started HP engine -- needs repower. Item good. in good working order. 22in ID 12443. Sam x702 kohing head. head works great.

1997 Morbark Model 2400 Chipper Item ID 13185. Sam x702 - Has a Cumins diesel engine and 1999 Barko 160D - new engine with runs great. fluids and filters Item ID:All 13855 approximately 1500 hours. Hour Contact: Sam Item ID 13429. have been changed. meter dont work. The last 2 owners Ph:x702 (888) 401-6367 x702 Sam have only used it to load trucks or 1999 Morbark TubHas Grinder as a backup as 1400 needed. a CTR

‘08 John Deere CT332

Loader w/Cab; Very HydroAx 611B -4200 New injectors, delimber, grapple hashours; been rebuilt. good condition.

Located in PA. injector pump. New 5.9 cummins Boom cylinders have minor leaks.

Item ID 13694.

13361. Sam Sam x702 pump engine.

Rebuilt hydraulic Item ID x702 2006 Morbark 6600 Horizontal and new 275 teeth.

Item ID 13768.

94 Barko - Excellent value Sam Grinder Approx.

6000 hours x702 with low at hours at 3,500. 5.9 on this maintained 1999well Hydroax 511EX machine.

- New CUMMINS continuous grapple.

Has New Cat Dealer Rebuild cummins engine only 1500 Runs Great!.

Itemwith ID 13740.

Sam

1000HP Engine at just 5000replaced hours. x702 hours. Caterpillar 42” 66-5/8” HAMMERMILL; BELL at the end gearXbox to hydraulics

VARIABLE SPEED INFEED 1990 Bell Super T -hours This Bell of summer.

11000 totalhas on HAMMERMILL aSYSTEM; brand new Duetz engine.

Lever cutter. Tires are 28L’s @ 80%, 2

DRIVE INCLUDES ALL BELTS, control, 33” one bar, slick. pump and tranny @ 40% and Brand new SHEAVES, BUSHINGS & center section. 20” single post ❘  LumbermensCO.com head. Heat and air work. Item ID  Lumbermensmagazine.com

‘89

Ite Co Ph

1379

1998

Fell

hou

larg

lifti

larg

Cum

Dec

1324

2002

12,0

Wor

Aus

1998

Bun

Cum

hou

22”

A/C

Cut

Sam

KM

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

with 44 inch wheels, and all the bells and whistles, its a production

‘97 Prentice 210E machine, with air strain conveyers

Item# 13795 that go up and down, with airbags,

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Contact: Sam Ph: (888) 401-6367 x702

it includes two sets of Mcdonough

Ph: (888) 401-6367 Selma, North Carolinax703 www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel is supported on both sides. This

Logosol Planer - This is a 10” Every Reputableis2006 Wide Band an extremely accurate machine 4 sided planer that has removable Supplier Offers insideve1y goodthat condition, Cuts 130 cutters will take up to KENTUCKY WOOD EXPO

feet aSteel minute also has CLTa blower presses.

Fri, 15 Sept3- High Sat, 16Quality Sept Swedish 12” lumber and includes ID 13876. Austin x703 Lexington, Kentucky 3 3” – 8” Band Width Item system. Item ID 13428. Sam x702 http://www.kfia.org/ S & W 125 Band Mill with POLE & POST PEELERS 3 16 to 20 Gage KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Caterpillar generator - Low hours

‘06 Brewco B1600 DESIGN DIRECTOR Donna Heninger Resaw

EQUIPMENT REPS Item ID: 13862 Sam Wall Contact: Samext. 702 (888) 401-6367 When You 401-6367 Buy Yourx702 Circular Saws From B.H. Payne sam@lumbermens.co Ph: (888)

3 Double Cut OptionsPS8 Post Peeler - This peeler has ‘99 Hydro-Ax on the mill, electronic computer Set THE PAUL BUNYAN SHOW been converted to electricity over 3 Choice of Swage orworks,1 Stellite 1/2" or 2" band, 22ft. track 511EX Fri, 6 Oct - Sun, 8 Oct hydraulic. Comes with a operators

‘05 Woodmizer Austin Woods You’ve Bought the best... We Guarantee It! LT300 (888) 401-6367 ext. 703

WOLVERINE

Cambridge, Ohio Item ID: 13799 www.ohioforest.org BUT ONLY THE Contact: Sam Ph: (888) x702 BY 401-6367 MENOMINEE

** INFO LINK**

Item ID: 14031 Traditional Quality Combined Contact: Austin With Todays Technology B & B Mfg . ............................... 18 P.O. Box 1916

Ph:611 (888) Ex-Hydro 401-6367 x703 ‘98 ‘10Columbia, Shop TN Built 38402-1916 B. H. Payne .............................. 16 Call 800 752-0627 Ax (888) Circular Saws401-6367 Wood Processor Make Sure To Ask For Our Free, Complete Saw Catalog Saw Bits and Shanks Quality Brand Reg. U.S. Pat Off

Baker ...................................... 5, 7 AD13916 SUBMISSIONS Item ID: 13948 Item Circular ID: Knives We Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth May be sent to­ Contact: Austin..................... 27 Bell's Machining Carbide Tipped Saws Contact: Austin Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also morris@lumbermens.co Carbide Strobe ® Saws Ph: (888) 401-6367 x703 31 Ph: (888) 401-6367 x703 BruteCarbide ForceTips, Mfg . .....................

B.H. Payne & Company Stock & Sell Bits & Shanks, Diamond Wheels, POSTMASTER Saw Manufacturers John Deere 548G2 Knife Grinding Wheels, Saw Gumming Wheels & Knives.

Buck Equipment (AIM) ........ 36 Send address changes to: Item ID: 14042 Lumberman's Exchange Here’s- What You Get With Every B.H. Payne Skidder Very good running IDCorley 13438.Saw Sam.............................. x702 Mfg 32 P.O. Box 1916 Contact: Austin • Saws manufactured from only the Highest Quality Nickel Alloy Steel. condition.

Big Capacity Grapple!

2007 TimberPro 810 Combi Columbia, TN 38402 CRD Metalworks .................... 25 Ph: (888) 401-6367 x703 ‘14 B66TD • Each SawTires Milled with State-Of-The-Art Precision CNC Milling 9400 hours. at 40%.

Totally Machine - Forwarder set Machine. up but The Lumberman's Exchange is CW Mill-ArmorHog ..............

17 Rotochopper • We Tension Your Saw to Your RPM Speed BEFORE Leaving Our Factory. published byDealer Woods gone

by TP comes with rebuilt Log Max 750 -through 3410 monthly hours. $32,000 in who recent CW Mill-Hogzilla ................... 15 • Your Satisfaction - Completely Guaranteed.

Publishing, P.O. Box 1916, Item ID: 13838 did the following: Repacked and processing head.

Less than 5200 upgrades repairs.

Fecon Columbia, TN and 38402.

All rights Dyna Products ........................ 35 Contact: Sam reserved.

AllMulching editorial/ advertorial resealed hydraulic cylinders – ID total hours. Runs very well. Has BH250 Head.

Item submissions are used at the (888) 401-6367 603 8 B.H. Payne & Company, Inc. Empire HydraulicsExt. ...................

grapple arch, steering; Replaced 13502.

Sam x702 discretion of the publisher and may P.O. Boxhoses 90608 be edited for purposes of hydraulic and lines where 2011 Tigercat 620D - clarity This is a

feed deck 20 foot out feed deck

Item LOGGING ID: 13911 & BIOMASS MID-ATLANTIC Contact: Austin Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

MAILING ADDRESS

has been rebuilt, it has a 24foot in

Escanaba, Michigan ‘05 Tigercat 230B

PUBLISHER

austin@lumbermens.co

10 hours on this machine since it

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

blade and plumbed for a clam

Great Lakes Mfggear . ....................

34 bunk.

New swing box. Quick

Eastspace.

Point,Although GA 30364 and all efforts have needed – hour filltopump, grapple, etc; inMachinery 15 13408. min. toSam switch low skidder with only Item ID x702head to3 Hahn ...................... been made ensure accuracy of 5500 attach 404 761-8711 content submitted by advertisers Repacked hydraulic fill pump; Cummins 6.7 Grapple QSB engine. hours a cummins engine and grapple.

2014 Boiler Tigercat 630D Hurst .............................

14 Fax 404on761-5398 and writers, the Lumberman's

Cat 3406 140KW Genset, 12,400 cab, electric boxes, conveyor and hours ready to run. Item ID 13434. kickers and will peel a 3” post to a Sam x702 7” post. Comes with a barko loader

SAW GUARANTEES

CARRIAGES & DRIVES mounted on a truck that has also • Cutting Edge Plasma Welds 2010 Cardinal HD Carriage Runs great. Has worked double been converted to electric power.

• The Industry’s HighestCarriages Band Saw Capacity (Sawmill) - Cardinal shifts so it has higher hours Item ID 13926. Sam x702 Carriage line Inventory it includes carriage • Quick our HUGE at 13,500, but............................. has Delivery been well from PORTABLE SAWMILL M&F Gauge 28 with onboard logPusher turners, carriage 14’ Snow 36” Portable Sawmill - Maximum maintained.

New U/C last year.

• Fast Sharpening Program Meadows Mill, Inc . ................

33& Exchange drive, for carriage, Itemhyd ID:pac JW-492406 24” grousers.

All pumps rebuilt last diameter log- 36” Maximum length ‘11 Doosan DL200 to Keep YOU Running Contact: Williamscontrols, Menominee Saw .....................

29 sawyers cab,Jcomputer ofPh: cut-20’6” Powered by x701 a Koehler year.

Gull wing engine cover with Item JW-113876 (888) • ID: Competitive Pricing cabinet with 401-6367 electronic drives for Metal Detector's Inc. ..............

30 J Williams Contact: hydraulic lift for easy maintenance. Diesel 9.8HP Blade-1-1/4” by 13’2” carriage knees, husk including Midwest Sharpening ..............

Ph: (888) 401-6367 x701 long 12 Volt precision Rolly IIAnd in good condition and 26 ONLY Menominee Gives Yousaw-head Everything 48" bottom saw and 36" top saw Mor bark .....................................

9 up/down.

Item ID 13897. computer measures well.

Owner You need in a Wide Band Saw – Plus Austin x703 Industry’s retiring. Bought new for $540,000!.

Multitek ...................................

12 Expert Service from the

Most

STACKING RAC ‘04 Fabtek 344B

36” Portable Item IDSaw 13362.

Sam x702 Piper's Shop ....................

13 Knowledgeable Staff.Sawmill - Maximum diameter log-36” Maximum length 2006 TimberPro 830 COMBI Rotochopper............................ 40 Got- Just a Wide Problem? of cut-20’6” Powered by Koehler Harvester/Forwarder 5700 Band Row Electric ............................ 20 SawgasToday and1-1/4” You’ll 19HP Blade by 13’2” hours. VeryCall goodMenominee condition. Comes Sawmill Exchange ..................

11 Why More Mills the Pro!precision long Trust 12 Volt saw-head with grappleLearn for loading forwarder Item ID: JW-093430 Select Sawmill .........................

19 and Log Max 7000 processing head up/down 12 Volt Electrical

‘05 Transport Trailers Custom bogies.

Set up for quick The Paul Bunyan Showchange ......... 39 Log Pup

Smith Sawmill ...........................

4 for harvesting.

2 sets of tracks for

TOLL FREE 1-800-582-0470 Dixon Sawmill - VERY UNIQUE Contact: J Williams Ph: (888) 401-6367 x701

Forward/Reverse Saw Head

Travel. Item ID 13899. Austin x703

from harvester to grapple. One Thomas Controls..... 10 Item Industrial ID: JW-538174 Processor - This is MILL! a Chomper AND EFFECTIVE man operation.900 Log Max Replaced exhaust; Replaced center 260HP. Optional Tracks on all 16thhead St.,has Menominee, MI 49858 Dixon a fire suppression Comes Iron Skidder Dual Arch Grapple.

Just Exchange, its principlessystem. and Contact: Williams Bull ................................... 21 Union GroveJSaw & Knife.. 2, 37 super 14, with a 60hp In associates, are not held liable for in bottom blade andengine.

38 in top saw and 401-6367 runs Compare pins; Straightened andtires painted $10,000.

Item ID 13501.

Tel:well.

906-863-2609 Fax: 906-863-1147 mounted on 35.5 at 50% back bogies 1990adds hours.

3 year/5000 hour PT top Ph: (888) x701 to 52 “Since 1890” errors or omissions.

Reproduction, Kilgore Saw ............................. 22 Universal Refiner ................... 23 very nice shape.

Only 171vertical hours, blade.

It has a four blade new machine at Email: $650,000.info@menomineesaw.com Item ID panels; allprohibited fluids and x702 in whole or part, is with­ on Samwarranty. andChanged 40% front and good chains 35.5 tires with dualing comes with green chain conveyer. www.BakerProducts.net Lignomat ................................. ................................ l out written consent. cab; Checked edger diesel powered with a fuel 13439. Sam x702 filters; TimberPro II 24 WoodMizer allRe-insulated 4 tires.

Has the bigger 630 axles 2010 rings at www.paynesaws.com 60%. 725B Widew/Rolly blade. Winch.

E-mail: info@paynesaws.com Web Site: 800.S48.6914 I S73.663.7711 ©2017 Woods Publishing Waratah 624 Super New All of theduezt manuals formotor. the engine, efficient 247hp Item and fixed wiring asCenter needed.

Item Machine.

PLANERS and no winch. pins are tightProcessor Item ID- Super 13526. Clean Sam x702 Computer for head (Logrite). and the chopper itself come with - USED FORESTRY EQUIPMENT FOR SALE ❘  SELL YOUR EQUIPMENT TODAY ❘  24/7 SUPPORT ❘  (888) 401-MENS NO. 13 L! Tigercat 401-MENS l§ 234B Loader - Model TODAY 0grappleSUPPORT and extra fuel tank. Item ID 13929. SALE 2015 Tigercat roatation on the w/ a 2006 630C Grapple  Issue 364 Lumbermens  since 1986 ❘  List  seLL  exchange buy  save  Lumbermensmagazine.com 10500 hours. New main pump ❘ it, as well as all of the electrical Sam x702 234B. Only 300 hours on this 30’ reach on the boom. Joystick Skidder - Very good running and auxiliary pump. New rebuilt schematics. Item ID 13894. Austin

WWW.MENOMINEESAW.COM

Now One Phone Puts You in Touch with ThE Single Source “Precision forUnder allPressure” your Sawmill Needs!

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Corley Sawmill maChinery Tyrone Berry Carriage DriveS lewiS ConTrolS opTimizaTion Carriage Linear & Set Shaft Lewis Controls “Electronics for sawmills by sawmillers” Tyrone-Berry Carriage Drives & Parts • Headrig Slabbers Log Turners • Bandmills & Linebar Resaw Systems Board & Gang Edgers • Trimmers

‘16 Halverson H140 Skidsteer (DEMO)

‘03 John Deere

Item ID: JW-909632 748GIIIJ Williams Contact: Ph: (888) Item ID: 401-6367 13851 x701 Contact: Sam Ph: (888) 401-6367 x702

‘93 Barko 180B

Item ID: 14077 Contact: ‘89 CatAustin D4H LGP Ph: (888) 401-6367 x703 Item ID: 13999 Contact: Austin Ph: (888) 401-6367 x703

19 44

The Most Complete Line of Sawmill Machinery Since 1905!

Single Machine or Complete Turn-Key Operation More Production & Profit is Only One Call Away For Parts, Service & Sales

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

mfg

Call (423) 698-0284 CORLEY

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

2004 John Deere 648G III

‘95 John Deere C6 Tree Farmer ItemHood ID: 13920 ‘04 Loader Contact: Austin 28000 Ph: (888) 401-6367 x703 Item ID: 13971 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

hours, 36” pads. It does have some 1994 Barko 160B - Electric small leaks. Owner is going back knuckleboom, 30' boom, 75hp off ontoID: a conveyor.

Item 13878 This is a very to rubber tired cutters because his well built processor.

Contact: Austin Item ID 13820. motor, Rotobec continuous job has changed. Item ID 13898.

Ph:x702 (888) 401-6367 x703 grapple, 5,000 original hours.

Sam Sam x702 (excellent condition.). Item ID Firewood Processor - This is P.O. Box 170 • Prentice WI 54556-0170 • 800-243-5438 Timberjack 240 - In excellent only 6650 hours. New center 13238. Chris x700 a Chomper Model 16 PDA www.multitekinc.com • sales@multitekinc.com condition! Well maintained with section. Cummins engine with ‘05 Gehl CTL 70 1995 Barko 775 B Feller Buncher automatice firewood processor detroit.

Lots of new parts.

Item electronic automatic transmission.

Item ID: JW-986495 -453 Pumps recently redone.

400 hrs with John Deere power unit with

www.corleymfg.com • sales@corleymfg.com

‘83 John Deere ‘14 CAT 535C 4850

Item ID: 13840 Item ID: 14073 Contact: Sam Contact: Austin Ph: (888) 401-6367 x702 Ph: (888) 401-6367 x703

Multitek Firewood Processors

Contact: J Williams Frick #1 Jumbo Mill Ph: (888) 401-6367 x701 Item ID: 13957

Itemhours.

ID 13777.

Sampanel x702 includes low Control 1998 oil Timberjack - Excellent tach, pressure,460 water temp and

ID injection 13785. Sam x702always started on pump.

Timberjack 380working Skidderorder.

- Tight22in good. in good

Increase Your Productivity and Profitability Contact: Austin ‘88 John Deere ‘94gauges.

Caterpillar machine.

Runs great.

Low440D Hrs. Condition.

Runs WOODS kohing head. head works great. amp Cutsgreat. logs up to 16”.

Ph: (888) 401-6367 x703 One owner. Item ID 13468. Sam READY.to Item ID 13545.your Sam x702 • Quality Equipment Reduce Labor Costs

chain conveyer, 8 way splitter, on

320

One owner and comes with all 2001 Timberjack 460CModels - This is a Circular Saw manuals or Bar & 13936 Chain 20,000lb goose neck•trailer.

Item ID and receipts.

Purchased Item ID: • 7 Models to Choose From single arch with winch only tires @ 90%, Counter Weight, 6 Contact: Austin 13916. Austin x703 new for $32,500.

Item IDwith 13865.

Ph:x702 (888) x703 Production up401-6367 to 5.5This Full 6800 original hours. isCords a very cylinder Cummins Engine. Ratings Best Value Portable •Diesel Log Splitter Sam

Skidder Item ID 13185. Sam x702 Item ID: 13781 x702 1999 Barko 160D - new engine with

Contact: Sam Timberjack 4601500 Grapple Skidder. approximately hours.

Hour Ph: (888) 401-6367 x702 Per Hour -meter This machine is an excellent dont work. The last 2 owners

condition.

Running daily!.

Item or ID have only used it to load trucks in very good shape and has been 13860.

Sam x702 engine has a crack in it. It can be as a backup as needed. Has a CTR BANDIT well maintained. Item ID 12194.

4000 hours. Torque convertor ‘69 207 Timberjack cable skidder loaded onto1900 a lowboy.

This would machine.

Itemwith ID 13885.

Austin 1994 Timberjack delimber, grapple has been rebuilt. quality chips patented ‘Cone’ Handles logs up 450C to 32”.- Grapple Uses 1999 Bandit Tracked Disc Made in the U.S.A. Sam x702 transmission. 14 hole wheels. Tires - This cylinders Machine has a Brand be great starter skidder with a at new Boom x703 design. Can easily load 42’ with winch, transmissiion and Chipper have minor leaks. drum 13HP Hondanew motor.

Manual start - Cat Under Carriage ‘98 Timberjack 1270B - 7,300 hrs. are 30.5’s at 55% and one at 80%. new ID 4 cyl Perkins engine.

Item ID 13829.

Sam x702 1993 Timberjack hydraulic pumps.

Item ID 13826.

Item 13694.

SamEngine, x702 vans and produce1010 6 - 8Forwarder loads per but electronic option is available.

50% or better.

475 hp Cummins Perkins 6 Cylinder Engine. All Center has very little slack. This Barko 275 - Excellent value Diesel.

7500 Hours.

One owner. day.

Itemhours.

ID 13882. x703 Has Major Overhaul out of frame.

2005 Timberjack 460D - Same thing 94 - 16,000 GoodAustin running SamLog x702Lift. Uses 4-way wedge skidder has been a back up skidder modules and computer are brand with low at hours at 3,500.

5.9 EDGERS & GANGS adjustable to single two- This way. Great Well maintained.

Item IDAround 13294.

Transmission has been completely as a John Deere 648GIII. condition.

6 wheeled.

Tracks for 1997 Timberjack 240D new. Tires on average are around for the several years. Skidder has CUMMINS continuous grapple.

Brewco Saws Two Brewco Saws Value!

PA. Item ID 12062.

Sam x702 Sam x702 overhauled out of frame. Reverse 12000 Hours with new engine, rear bogies and chains for front skidder comes with 23.1 X 26 80% Video: http://youtu.be/R_ 12000 hours. Item ID 13805. Sam Runs Great!.

Item ID out 13740.

Sam in excellent condition.

Runs great.

Firewood Processor Thisfront. is a 2004 Beast with Model box also overhauled of frame. dual Bandit arch, comes 77 4680 X 44.00 tires.

Item ID 13446. Sam x702 tires at 95% rear and-30% MQZe5QEFw. Item ID 13572. Chris x702 x702 Item 13644. Sam x702 3412 Diesel homemade processor with aand 10’ Has a new Injector pump and all X 32 Caterpillar tires. 3 at 60% andengine 1 new one.

1993 ID Timberjack 380B PG Highlift New brake bands in winch x700 1981 Timberjack 520 - Very hard to FIREWOOD PROCESSORS BELLon tires on it. with 850 HP. 5300 hrs.

Mill in log deck.

Has a hydraulic grapple, new injectors. 25% Excellent skidder. Item ID 13709.

Tree Trimmer, s/n CM4478, good cable. Engine was rebuilt 2 VALMET come by! 653 Detroit. Runs Great!.

2010 Built Wood Processor 1990 SuperChris T - This Bell has chain that allrunning runs off good condition. Just finished 10 Item Bell ID 13283. x700 Sam x702 5,152Shop hours, Delivered New in years and ago. kicker Good strong 1998 Valmet 603 3-Wheeled Item ID 13741. Sam x702 -1995, It hasCab a 353 Detroit diesel, 40 a brand new Duetz engine.

Lever Acre clearing job, ready to work! of a 4 cylinder Mercedes power ‘88 450B Timberjack - Put new 2005 TImberjack 608B - This cutter with A/C, 5 blades, machine. Item ID 13917. Sam x702 Buncher - 6500 hours on total 2002 Timberjack 608s with hot saw inch insertBranton tooth circle saw, 30 foot control, 33”in bar, pump and tranny Remote control.

Big production unit. a 4’ chain thatSkidder kicks centerpins 8 months it has a 10800 frame hours with a new 75 reach, Winch, Push 1998 Has Timberjack 360saw Cable machine but no hours onago, 4BT3.9 -has Approx.

6000 hours, Machine is undercarriage with less than a 1000 new eslking beams & new radiator.

Blade, 4X4, Firestone 67X34.00/26 - This is an excellent skidder with  Issue 364 ❘ 382 Lumbermens™  since 1986  List  seLL  exchange  buy  save ❘  LumbermensCO.com  Issue 364 Lumbermens  since 1986 ❘  List  seLL   Issue 364 Lumbermens  since 1986 ❘  List  seLL  exchange  buy  save ❘  Lumbermensmagazine.com installed well as with 1700ashours, in new very master good cylinders. Very and tight condition.

Easilyclean produces high

FL.in Item -FOB:Okeechobee, Small manufacturer PA ID has 13090.the Sam x702 made best valued log splitter.

low hour machine.

Cummins 5.9 LOGGING EQUIPMENT

Ite Con Ph:

58 Ch

Ite Con Ph:

Rem

Equi

Spee

40%

mac

main

Hard

of co

avai

Item

2005

Forw

hydr box

2012

pum

cond

hour

exch

All Sizes Available!

BANDSAW** CALENDAR** TOP PERFORMING, economical blades for all primary &

BLADES

secondary wood processing. Welded to your lengths!

NY STATE WOODSMEN'S We also offer expert sharpening services, plus...

FIELD DAYS August

Fri, 18 August - Sun, 20 Gang • Edger • Scragg • Trim • Split • Strob

....and just about any Boonville, Custom Saws youNew need York to keep you cutting longer... www.starwebhosting.net/woodsmen/ for less. Ask about FREE Shipping!

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

©2019 Wood-Mizer LLC

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES Call Marvin Miller for a quote EQUIPMENT EXPO LOGGING & HEAVY 231-924-5953 (fax) 231-924-6166 / 11606 Brickyard Road • Holton, MI 49425 Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags,

ROW ELECTRICAL EQUIPMENT, INC. MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

pressure guides. Top Casting wheel Selma, North Carolina www.midatlantic-logging-biomass­ is supported on both sides. This YOUR SOURCE FOR USED, RECONDITIONED: MID-ATLANTIC expo.com/ LOGGING & BIOMASS EXPO is an extremely accurate machine • Squirrel Cage Motors • DC Motors - Crane and Mill • Transformers, Three-Phase

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

• • • •

MARKETING DIRECTOR John Williams (888) 401-6367 ext. 701 j@lumbermens.co

it includes two sets of Mcdonough

Fax

Gear Motors Wound-Rotor Motors Synchronous Motors DC Motors

to:

• Adjustable Speed Drives KENTUCKY WOOD EXPO • Generators - AC and DC Fri, 15 Sept - Sat, 16 Sept • Engine-Generator Sets Lexington, • Transformers,Kentucky Single Phase http://www.kfia.org/ P.O. Box 2812 •KentuckyWoodExpo.aspx Toledo, Ohio 43606

• • • •

Across/Line Magnetic Starters in ve1y good condition, Cuts 130 Reduced Voltage Starters feet a minute also has CLT presses.

Safety Switches Item ID 13876. Austin x703 Phase Convertors S & W 125 Band Mill with

Caterpillar generator - Low hours 800-248-4479

WWW.RoWELECTRiCAL.CoM on the mill, electronic computer Set DESIGN DIRECTOR THE PAUL BUNYAN SHOW 419-248-4479 rowelec@glasscity.net Donna Heninger works,1 1/2" or 2" band, 22ft. track Fri, 6 Oct - Sun, 8 Oct WE ANSWER THE PHONE 24 HOURS • WE BUY USED ELECTRICAL Cat 3406 140KW Genset, 12,400 Cambridge, Ohio EQUIPMENT REPS

419-244-8887

www.ohioforest.org

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

P.O. Box 1916

Bell UltraTNT38402-1916 on Columbia, (888) 401-6367 Tracks Item ID: AD 14023 SUBMISSIONS Contact: Sam May be sent to­ Ph: (888) 401-6367 x702 morris@lumbermens.co

B & BHalverson Mfg. ...............................

18 ‘16 H140

Item ID: JW-192810 Baker ......................................

5, 7 Contact: J Williams Ph: (888) 401-6367 x701

Bell's Machining ..................... 27 Brute Force Mfg. ..................... 31

does great job in hardwood. Priced

Lumberman's Has only 2600 hours.Exchange Has new

John Deere 20 .............................. hole Sweda wheels Corley Mfg 32

P.O. Box 1916 Columbia, TN 38402

30.5 X 32 26 ply on rear and 70% on front. Still a new skidder and

priced to sell. ItemExchange ID 13696.

The Lumberman's isSam x702 published monthly by Woods

Publishing, P.O. Box 1916, 2013 JD 848H Grapple Skidder -

Columbia, 38402.

All rights 4200 hours.TN Tires at 50%.

Winch.

reserved. All editorial/ advertorial submissions are used at the are tight. Machine is dry. Engine discretion of the publisher and may runs great.for Item ID 13555.

Sam be edited purposes of clarity and space. Although all efforts have x702 beenJohn madeDeere to ensure accuracy of 1991 640D Skidder content submitted by advertisers - 23.1 x 26 Tires 50%, Rebuilt and writers, the Lumberman's Trans.,Good Machine.

Exchange, itsTight principles and Item ID 13191. Sam x702 associates, are not held liable for errors omissions.

Reproduction, 1995 JDor 290D with Hytec 4700 in whole or part, -is290D prohibited with­ Harvester Head in good out written consent. condition. Engine just overhauled. ©2017 Woods Publishing

Very good running condition. Pins

Undercarriage at 50%. New water

CARRIAGES & DRIVES

2010 Cardinal HD Carriage

Carriages (Sawmill) - Cardinal

M&F Gauge ............................. 28

‘05 CAT TK560

Skidsteer B. H. Payne .............................. 16 Meadows Mill, Inc. ................ 33 Item ID: 14004

POSTMASTER with winch, direct drive. Comes

address changes to: withSend 6000 hour extended warranty.

BEST LESS

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

hours ready to run. Item ID 13434.

Sam x702

(AIM) toBuck sell!. Equipment Item ID 12206.

Sam ........ x702 36 - These 50’s are mounted on hard

Metalworks .................... toCRD find 20 hole John Deere sweda25

rims.

50% tread left.............. on these17 CW Still Mill-ArmorHog tires. 4 available. Item ID 13852.

CWx702 Mill-Hogzilla ................... 15 Sam

FABTEK Dyna Products ........................ 35

2004 Fabtek 546C Forwarder -

Empire Hydraulics ................... 8

Good running condition. 30.5 tires

inGreat front Lakes at 60%.Mfg 650 .tires in back at ....................

34 60% and come with tracks. Front

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Midwest Sharpening.............. 26

13910. Austin carriage knees,x703 husk including

Mor bark -.....................................

9 Grapple Good running condition.

be a great starter skidder. It is

1977 (est) FMC 220CA Tracked

Skidder w/ESCO Swing Boom

No winch....they cannot fit with

well. Head recently updated and

Franklin 3000 - 4BT Cummins

Select Sawmill ......................... 19 hours since updates were done.

hours. Needs tires. Good machine

totally refurbished in 2012. No

Includes warranty on machine and Smith Sawmill ...........................

4 tracks. Detroit 6V53 engine with

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

1977 (est) FMC 220CA Tracked 22 Kilgore Saw .............................

New Paint.

Item ID 12731. Sam23 Universal Refiner ...................

195HP. Clark 28000 Powershift

Winch. ROPS Cab. Includes bolt

on grapple head with full function.

engine with approximately 600

for the money and for a start up

company. Item ID 13786. Sam x702

2003 Franklin Q80 Grapple Skidder - 7500 hours, but just 5000 hours

on reman engine. New Radiator;

www.prolenc.com

New Hydraulic Pump; Comfort

cab with good working heat and

x702 air; Tires at 80%. Item ID 12450.

Call 877.563.8899 250.563.8899 www.BakerProducts.net WoodMizer ................................ or l FRANKLiN Sam x702

Skidder - Good running unit.

local................................. dealer or Lignomat 24

Detroit 6V53 cranks and runs

well. Military style tracks at 70%.

1995 Franklin 170 - Enclosed cab,

Winch. Front Blade. Item ID 13226.

paint, 4 brand new 23.126 firestone

Sam x702

STACKING RAC

good and pulls good. Detroit 453

Skidder -Exchange 1976 Model that has been Sawmill ..................

11

Runs well. Cab has heat Grapple and working single arch with a winch, new pump.

FORESTRY EQUIPMENT FOR Fixed SALE ❘ l§  SELL YOUR EQUIPMENT TODAY ❘ 0  24/7 SUPPORT - USED SALE ESCO TODAY SUPPORT and air with stereo and all run

a single arch with winch. Runs

Includes turbo and 32” speed power shift tracks at 70%.............................

Item ID 13227. Sam transmission. Good center section.

Rotochopper 40 Pins, Nuts & x702 There are a few leaks, but nothing Locks Row ............................

20 2012 Electric Refurbished FMC 210 Tracked major. Item ID 13819. Sam x702 Piper's Saw Shop .................... swing boom grapple.

Military 13 style

transmission.

Clark 40,000 lb Thomas Industrial Controls ..... 10

Contact your

Franklin 170 Skidder - This 48" bottom saw and 36" top would saw

KIT SPECIAL

Front blade.

Detroit 6V53 engine.

Multitek ...................................

12

Double ID 13363. Sam Hurst bunk.

BoilerItem .............................

14

FMC

Item ID: 14050

drive, hyd pac for carriage, Contact: Austin Woods

(888) 401-6367 Ext.controls, 606 sawyers cab, computer

Ph: (888) 401-6367 x702

The Paul Bunyan Show ......... 39

x702

Mill

with onboard log turners, carriage

Contact: Sam Menominee Saw ..................... 29

Hahn Machinery ...................... 3

blade. JD engine. One owner.

Sanborn Scragg Carriage line it includes carriage

tires, around 15000 hours. Item ID

800.S48.6914 I S73.663.7711

GMC

ton Service Truck ❘ 2000  GMC (888) 1.5 401-MENS NO. 15 L! 401-MENS - PTO driven air compressor,

big boxes, covered hose reels,

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

CAT 555D Grapple Skidder Item ID: 8610

3226 hours, 35.5 tires approx 50-60%, everything is in excellent condition, routine maintenance through cat, works great, pulling machine, selling only to buy a bogie skidder! Call for more pictures!

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

‘95 John Deere C6 Tree Farmer

John Deere 640E Cable Skidder

CAT 527 Grapple Dozer Item ID: 69600

Cat 527, undercarriage 90-95%, repaired leaky fuel tank, rebuilt 13428 Victory Ln. // PO2005 Box 124 transmission/torque and final drive approx 1500 hours ago, strong motor, good working machine. Call for more pictures!

Adams Center, NY 13606

Item 2500 ID: 98058 ‘13 KMC Track used as a spare, tight center, new engine about Skidder 1000 hours ago through Leslie equipment,

2nd owner machine, current owners have put less ID: than 14078 300 hours, 23.1’s tires, strong Item winch good winch Call for more pictures!

Contact: Austin Ph: (888)MARK 401-6367 x703 Contact:

Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703 off onto a conveyor. This is a very

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

well built processor. Item ID 13820.

Morbark Chipper Item ID: 43812

H O T

B U Y S

Sam x702

‘05 Gehl CTL 70 75”John Fulghum Chipper ‘83 Deere Item ID: 41386 75” 8 knife chipper 300HP motor, everything is in 4850 good working condition, hydraulic unit built in.

Call for more pictures!

Item ID: 14073

Contact: Austin Contact: MARK Ph: (888) 401-6367 x703 Email: Mark@lumbermensco.com

Phone: 888-401-6367 EXT 708

702-875-2703 with 1700 hours, in very good condition. Easily produces high

6 knife - 58” chipper with 3 pocket -blanks in it. 2nd Firewood Processor This is owner.... 1st owner could not make payments so Morbark bought it back.

Was like newModel 5 years ago when 2nd owner a Chomper 16 PDA purchased it.

automatice firewood processor

Contact: TED Item ID: JW-986495 with John Deere power unit with Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351 Contact: J Williams low hours. Control panel includes Ph: (888) 401-6367 x701

tach, oil pressure, water temp and

Stac Trac Item ID: 96875 amp gauges. Cuts logs up to 16”.

chain conveyer, 8 way splitter,Morbark on – Stac OneTrac owner and comes with - Has electric motor and 30 all ft track.

Don’t know the hours but it works really good for band

20,000lb goose neck trailer. Item manuals and receipts. Purchased millsID or stacking lots of squares 13916. Austin x703

Best Value Portable Log

new for $32,500. Item ID 13865.

Contact: TED Email: Teds@lumbermensco.com Splitter Sam x702EXT 701 or (801) 319-9351 Phone: 888-401-6367

made the best valued log splitter.

648 G3Handles logs up toItem ID: 76982 32”. Uses

1999 Bandit 1900 Tracked Disc

the transmission has 1k hrs. Tires 67X34X25. (about 20%). per butheelectronic is available.

Selling because is getting outoption of the business.

50% or better. 475 hp Cummins

quality chips with patented ‘Cone’

drum design. Can easily load 648G3 42’ grapple 13HP Honda motor.hasManual skidder, 2007. Engine 2k hrs onstart it and vans and produce 6 - 8 loads

day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge Contact: TED

EDGERS & GANGS

Email: Teds@lumbermensco.com adjustableEXT to701 single two319-9351 way. Great Phone: 888-401-6367 or (801)

Brewco Saws - Two Brewco Saws

Value! PA. Item ID 12062. Sam x702

in excellent condition. Runs great.

Firewood Processor - This is a CAT 522B Tracked Feller Buncher Item ID: 31272 Item ID 13644. Sam x702 homemade processor with a 10’

hours,Has 2900 a intermittent head, grapple, cold weather FIREWOOD PROCESSORS2016 Cat 522Blog1437deck. hydraulic

2010 Shop Built Wood

starting package, 28” tracks, self leveling cab, fire suppression system, tracks undercarriage Call for that more info Processor chainapprox and90% kicker all runs off

- It has a 353 Detroit diesel, 40 Contact:of a 4 cylinder Mercedes power MARK Email: Mark@lumbermensco.com

inch insert tooth circle saw, 30 Phone: foot 888-401-6367 unit. Has aEXT 4’708 chain saw that kicks or 702-875-2703  Issue 364 382

LOGGING EQUIPMENT BANDIT

- Small manufacturer in PA has

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

John Sam x702

Deere 473C Log Loader 2004 Bandit Beast Model 4680 Item ID: 66504 3412 Caterpillar Diesel engine

2007 437C Log Loader. 19K hours. Upgraded in accumulator.

with 850pump HP. 5300 hrs.Needs Mill bladder in hydraulic (D model). good condition. Just finished 10

Contact: TED job, ready to work!

Acre clearing Email: Teds@lumbermensco.com

Phone: control.

888-401-6367 EXT 701 Remote Big production

or (801) 319-9351

 List  seLL  exchange  buy  save

Item ID: 13920 Contact: Austin Sawmill Item ID: 30151 Ph: (888) 401-6367 x703

4 cylinder Perkins Motor, 30” wheels (29” cut width). Handles logs 3’ to 23’ . Built by an Amish fellow that use to do a lot of these. It is about 10-15 yrs old. Runs great. Doesn’t have any hydraulic assist.

Selling upgrade.Sam x702 capacity!.

Item IDto13421.

Contact: TED BARKO Email: Teds@lumbermensco.com

1994 Barko 160B - Electric Phone: 888-401-6367 EXT 701

or (801) 319-9351

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

Samsung SL150 Wheel Loader

on injection pump. always started Item ID: 98970 good. good working order.

Model in SL150, articulating wheel loader22in with enclosed cab, forks and bucket, 158 HP

kohing headnice. works great.

Cummins head. diesel. Very Mid 90’s machine

but very well maintained. Compares to JD pictures!

Item ID 13185.

Sam 644. Weight 29,800.

Call x702 for more

1999 Barko 160D - new engine with Contact: MARK approximately 1500 hours. Hour Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 meter dont work. The last 2 owners

702-875-2703 have only used it to load trucks or as a backup as needed.

Has a CTR Item ID: 60580

delimber, grapple been rebuilt.

Green Chain – 47’has long 9.5’ wide.

3 strand.

3 Hp have engine.

Open top Boom cylinders minor leaks.

chain.

Their Sam mill x702 burned down Item ID 13694. and most of what was inside was lost but this is outside and so with at hours at are 3,500. not low harmed.

They out5.9of the CUMMINS continuous grapple. milling business.

Log Great!. deck. 3Item strand, mightSam have Runs ID 13740. some fire damage, but mostly x702 good.

94 Barko 275 - Excellent value

BELL

1990 Bell Super Contact: TED T - This Bell has aEmail: brandTeds@lumbermensco.com new Duetz engine. Lever Phone: 888-401-6367 EXT 701 control, 33” bar, pump and tranny

or (801) 319-9351 ❘

 LumbermensCO.com

Item ID: 99580

2007 843J Feller Bunche. 18K frame hours. Just got the

and the motor rebuilt. Selling because NYhydrostatic STATEpump WOODSMEN'S FIELD DAYS he is getting out of the business.

Fri, 18 August - Sun, 20 August Contact: TED Boonville, New York Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351 www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO International Boom Truck Fri, 25 August Sat, 26 August Item ID: 84573

Item ID: 95716

The Tree

Hot Springs, Arkansas

35 Ton lowboy trailer. New brakes, new drums, that Started new bearings and seals.

Good running boom truck. Call for more pictures and info.www.arkloggers.com

it All!

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701has Since 1986, Lumbermens published or a (801) 319-9351 monthly circular

Contact: 72ND MARK ANNUAL GREAT LAKES Email: Mark@lumbermensco.com LOGGING & HEAVY EXPO Phone: 888-401-6367 EXTEQUIPMENT 708 or 702-875-2703 Thurs, 7 Sept - Sat, 9 Sept

Escanaba, Michigan

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 Hydro-Ax 470 Feller Buncher morris@lumbermens.co

Item ID: 9252

MARKETING DIRECTOR 2230 hours two tires 80% two 60% solid machine couple pins in head Williams could be changed one John minor hydraulic leak very little leak really tight (888) 401-6367 ext. 701 j@lumbermens.co

Contact: MARK DESIGN DIRECTOR Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 Donna Heninger

702-875-2703

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402 The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CAT (V8) diesel engine, 68’’ forks; air brakes, 10 hours this machine since it 16,000 lb on capacity.

Call for more pictures!

has been rebuilt, it has a 24foot in Contact: MARK feed deck 20 foot out feed deck Email: Mark@lumbermensco.com Phone: 888-401-6367 708 with 44 inch wheels, andEXT all the

702-875-2703 bells and whistles, its a production machine, with air strain conveyers

Timberjack Item 114 that go up350 and down, withID: airbags,

MID-ATLANTIC LOGGING & BIOMASS it includes two of Mcdonough new paint, 2 new tires and sets 2 @ 70% [18.4 X 34], 1 set Fri, 15 Sept - Sat, 16 Sept 1986, of chains, Heated cab. Detroit 353 Turbo engine. Ready to

Woods Publishing

ADVERTISING SALES

Item ID: 16485 Danckaert Band Resaw - Roughly CAT Forklift -1982 model V160B Forklift, 3208

MID-ATLANTIC

LOGGING & BIOMASS EXPO

pressure guides. Top Casting wheel Selma, North Carolina go nothing needs to be fixed. www.midatlantic-logging-biomass­ is supported on both sides. This Contact: TED expo.com/ Email: Teds@lumbermensco.com is an extremely accurate machine Phone: 888-401-6367 EXT 701 or (801) 319-9351

in ve1y good condition, Cuts 130

KENTUCKY WOOD EXPO 1991 Timberjack 450BFri, 15 Sept - Sat, 16 Sept Item ID: 1826

New pins & bushings. Tight skidder around. Ready to drag some wood.

Lexington, Kentucky all http://www.kfia.org/ KentuckyWoodExpo.aspx

Contact: AUSTIN Email: Austin@lumbermensco.comTHE PAUL BUNYAN SHOW Phone: 888-401-6367 EXT 703 Fri, 6 Oct - Sun, 8 Oct

931-797-8029

Cambridge, Ohio www.ohioforest.org

feet a minute also has CLT presses.

Tigercat 615C

ItemItem ID 13876.

Austin x703 ID: 17058

S & W 125 Band Mill with

2013 model with only 600 hours in like new condition, with size 30,5 tires.

Caterpillar generator - Low hours

on the mill, electronic computer Set Contact: AUSTIN Email: Austin@lumbermensco.com works,1 or OR 2" band, 22ft. track Phone: 888-401-63671/2" EXT 703 931-797-8029 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

** INFO LINK**

Sam x702

CARRIAGES & DRIVES

Innovative 2010 Cardinal HD Carriage

Clean-Burn Design Carriages (Sawmill) - Cardinal

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Saw ..................... 29 Baker ......................................

5, 7 Menominee Manufacturing a full line of biomass fired combustion systems backed with fi fty years of Bell's Machining ..................... 27 Metal Detector's Inc. .............. 30 innovative clean-burn design. Diverse in every Brute Force Mfg. .....................

31 Midwest Sharpening.............. 26 way with multi-fuel blending capability.

Hurst stokers utilize hundreds of common and Buck Equipment (AIM) ........ 36 Morbark ..................................... 9 abundant solid biomass fuels.

Large or small scale, Corley Mfg ..............................

32 project Multitek ................................... 12 management is eased with the CRD Metalworks ....................

25 Piper's impressively short installation time Saw Shop.................... 13 required with prefabricated CW Mill-ArmorHog ..............

17 Rotochopper............................ 40 modular components.

CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3 Rotary Dryers Sand Dryers Hurst Boiler ............................. 14 Grain Dryers Lumber Kilns Iron Bull ................................... 21 Cement Kilns Kilgore Saw ............................. 22 Brick Kilns Lignomat ................................. 24

The Paul Bunyan Show ......... 39

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Thomas Industrial Controls..... 10 Union Grove Saw & Knife.. 2, 37 Universal Refiner ................... 23 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including 48" bottom saw and 36" top saw

STACKING RAC 50

YEARS www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 17

L O G G I N G

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

CAT V160B Forklift BANDMILLS & HEADSAWS

B U Y S

35 Ton Lowboy Trailer

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

H O T

** CALENDAR** 843J Feller Buncher

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Timberjack 230 D Forwarder

2012 Tigercat 610C

Item ID: 98897 ‘16 Halverson H140 1977 model. 353 Detroit, 5 speed trans with a Skidsteer (DEMO) low low. New brake drums and brakes. Motor

Item ID: 98059

7870 hours, 1 hour on out of frame reman on the entire engine, hydrostats in great condition, dry machine, tight centers, tight blade, tight grapple. Excellent woods ready machine. Call for more pictures!

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

‘11 Tigercat 845C Item ID: 13927

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

good, pins loseJW-909632 on the loader, 2 extra tires 50% Item ID: or better. Tires on it 40%. Ready to use now.

Contact: J Williams Contact: TED Ph: (888) 401-6367 x701

Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701

or (801) 319-9351

‘93 Barko 180B JD 440C

ID: 4032 Item ID:Item 14077 (‘90 model) Winch re-done 1mo. ago, tires bought new Contact: Austin last March, size 18.4, JD engine 4cyl, 8.7K frame hrs, but there is(888) more than401-6367 that. Only 2 owners its entire life.

Ph: x703 Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709

801-362-2170

L O G G I N G

TimberPro 725B

JD 648G II

Item ID: 20976

Item ID: 34800

(‘12) (2.8K hrs) One owner. Cummins 8.3L, U/C at 40%. Everything in working order with a Quadco 2900 intermittent disc saw head. Cream puff!

Motor rebuilt 1K hrs ago, tranny redone 700hrs ago.

Needs new tires, but everything is in good conditions, tires are 30.5 size. Center section, pins & bushings good!

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

Email: Joe@lumbermensco.com Item ID: Phone: 888-401-6367 EXT13920 709 OR 801-362-2170

Timberjack 240D

Item ID: 40272 13428 Victory Ln. // PO Box 124 Skidder has a grapple and a winch, Adams Center, NY Cummins 13606 motor. In excellent condition.

with 6 cylinder

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘95 John Deere C6 Contact: JOETree Farmer

Contact: Austin ‘13 KMC 2500 Track Ph: (888) 401-6367 x703 Skidder TIMBERJACK 460D / 648G III Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

Item ID: 34900

(‘05) pins and bushings all good, no leaks, motor rebuilt approx. 2.5K hrs ago, T/C (no direct drive). Item Two new back tires, front tires 35%. capacity!.

ID 13421.

Sam x702JD 748G model bigger grapple on it. 13K frame hrs, new injection pump 8mo. ago, new ECU. A/C - heat good!

off onto a conveyor. This is a very

knuckleboom, 30' boom, 75hp

John Deere 700H Sam x702

grapple, 5,000 original hours.

well built processor. Item ID 13820.

Item ID: 1324 Firewood Processor - This is

‘05 Gehl CTL 70 John Deere 640G3 Cable Skidder Item ID: 51567

‘83 John Deere 4850

13000 frame hours with a New undercarriage. No blow by, Chomper Model 16 PDA and doesn’t ause any oil

automatice firewood processor

Contact: AUSTIN

Email: Austin@lumbermensco.com Item ID: JW-986495 with John Deere power unit with Phone: 888-401-6367 EXT 703 OR 931-797-8029 Contact: J Williams low hours. Control panel includes Ph: (888) 401-6367 x701

tach, oil pressure, water temp and

approx 2500 hours on rebuilt engine and reconditioned transmission, winch recently redone, all new o rings, clutch packs good, 6000 series winch big winch with oversized cable on it, 120 rate chokers, 23.1 tires 20-30%, comes with ice pick chains single diamond, 2 at 70% 2 at 80% or better, new hydraulic pump, all rebuilt axels, new differential pump, blade and steering cylinder recently repacked, great on cold start, no blow by strong motor strong transmission Call for more pictures!

chain conveyer, 8 way splitter, on

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

Best Value Portable Log

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

with 1700 hours, in very good

condition. Easily produces high

20,000lb goose neck trailer.

13916. Austin x703

new for $32,500. Item ID 13865.

Contact: AUSTIN Email: Austin@lumbermensco.com Splitter Sam x702 Phone: 888-401-6367 EXT 703 OR 931-797-8029

made the best Wheeled valued log Feller splitter.

Hydro-Ax 611EX

quality chips with patented ‘Cone’ Handles logs up Item to 32”.ID: Uses Buncher 40418

drum design. Can easily load 42’ 13HP Honda motor. Manual start 1999 611EX quick steer, 28L’s 60-70% all pumps gone through and revans and produce 6 - 8 loads

built, approx 8000 hours, dry machine no leaks, heart/ air works, all per but electronic option is available. new glass, tight excellent machine! Call for more pictures!

day. Item ID 13882. Austin x703

Has Log Lift. Uses 4-way wedge

Brewco Saws - Two Brewco Saws

Value! PA. Item ID 12062. Sam x702

EDGERS & GANGS

Contact: MARK Email: Mark@lumbermensco.com adjustable to single two way. Great Phone: 888-401-6367 EXT 708 or 702-875-2703

in excellent condition. Runs great.

Firewood Processor - This is a Komatsu Processor & Forwarder Item ID: 8298 Item ID 13644. Sam x702 homemade processor with a 10’

Like new, approx. hours Has on harvester, approx. 500 grapple, hours on forFIREWOOD PROCESSORS log750 deck. a hydraulic warder both in like new condition, tracks included! Selling only be-

2010 Shop Built Wood

cause workerschain only want to show up 2-3 days week.

Goingoff back to Processor and kicker thatperall runs cutter, skidder, loader setup Call for more pictures!

- It has a 353 Detroit diesel, 40

of a 4 cylinder Mercedes power

Contact: MARK

inch insert tooth circle saw, 30 Email: foot Mark@lumbermensco.com unit. Has a 4’ chain saw that kicks Phone: 888-401-6367 EXT 708 or 702-875-2703

 Issue 364 382

Lumbermens™  since 1986

❘

425D ampTimbco gauges. Cuts logs up to 16”.

Item ID: 98053 One owner and comes with all

1995 model with good Undercarriage and 22” quadco hot Item and receipts. Purchased saw.ID Aroundmanuals 10,000 hours.

- Small manufacturer in PA has

BARKO

Contact: JOE 1994 Barko 160B - Electric Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

John Deere 640D Sam x702 Item ID:63000 2004 Bandit Beast Model 4680 -

3412 Caterpillar engine cable Skidder.Diesel Rebuilt engine and 850 newHP. hydraulic with 5300 hrs.pump Mill input in.

Woods ready. good condition. Just finished 10 Contact: WALKER Acre clearing job, ready to work!

Email: Walker@lumbermensco.com Remote Big production Phone:control.

888-401-6367 EXT 707

 List  seLL  exchange  buy  save

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

2010 Vermeer HG6000

good. in good working order. 22in Horizontal Grinder Item ID: works 96128great. kohing head. head

765 HPID C1813185. engine with 5000 x702 hours Half of new chain Item Sam and apron 3 screens- 6”, 4”, 2” Extra parts Call for more

pictures!

1999 Barko 160D - new engine with Contact: MARK approximately 1500 hours. Hour Email: Mark@lumbermensco.com meter dont work. The last 2 owners Phone: 888-401-6367 EXT 708

702-875-2703 have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Cat 515 Converted Cable Skidder Item ID: 2042 Runs Great!. Item ID 13740. Sam

custom built log arch styled after John Deere arch made with

heavy duty steel, brass fittings, grease-able rollers($7k arch). x702 Approx 4000 true Cat documented hours, 28L tires, 2 like

BELL

new, 2 50%, coolant and oil tested by Cat and documented on July 24th 2018, enclosed cab, working heat/air, everything is in great working condition. Call for more pictures!

1990 Bell Super T - This Bell has MARK aContact: brand new Duetz engine. Lever Email: Mark@lumbermensco.com Phone:33” 888-401-6367 EXTtranny 708 control, bar, pump and

702-875-2703 ❘

 LumbermensCO.com

** CALENDAR**

Cat 318CL FOR CLASSIFIEDS Item ID: 97884 Call 888.401.MENS (‘08) (6.7K hrs) 8.3L Cummins engine w/Rolly 2 processor head. U/C 05’ model with 6000 hours, enclosed cab with heat & air.

50%, enclosed cab, leveling cab, A/C - heat works. It can also be Everything works like itpictures, should.

See prices, and NY STATE WOODSMEN'S FIELD DAYS purchased without the ROlly 2 head Fri, 18 August - Sun, 20 AugustContact: AUSTIN Location of all equipment at Contact: JOE Email: Austin@lumbermensco.com Email: Joe@lumbermensco.com Boonville, New York www.LumberMB\ISmagazine.com Phone: 888-401-6367 EXT 703 OR 931-797-8029 Phone: 888-401-6367 EXT 709 OR 801-362-2170 TimberPro 735B Item ID: 52609

www.starwebhosting.net/woodsmen/

Fri, 25 August - Sat, 26 August

Item ID: 92115

Hot Springs, Arkansas www.arkloggers.com

2011 model with 7200 hours, has good rubber and is a one owner well maintained skidder.

BANDMILLS & HEADSAWS

Timbco 820D Danckaert Band Resaw - Roughly Item ID: 18370 10 hours on this machine since it

06’ model Clam bunk forwarder with Cummins engine.

has been rebuilt, it has a 24foot in

Contact: AUSTIN feed deck 20 foot out feed deck Contact: AUSTIN 72ND ANNUAL GREAT LAKES Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029 with 44 inch wheels, and all the has LOGGING & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 703 OR 931-797-8029

Since 1986, Lumbermens published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

Thurs, 7 Sept - Sat, 9 Sept

Timbco 425B

machine, with air strain conveyers

Item ID: 74779

MID-ATLANTIC LOGGING & BIOMASS (‘93) new drive track pumps 1K hrs ago, motor was reman 3K hrs ago. 33” Timbco barsaw head. U/C 60%. only 10K frame hrs. Three Fri, 15 Sept - Sat, 16 Sept owners. One of cylinders on boom needs repacking. A/C - heat ok, windshield just replaced, 5.9L Cummins, leveling cab.

JOE MID-ATLANTIC ADVERTISING SALESContact: LOGGING & BIOMASS EXPO Email: Joe@lumbermensco.com

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

Phone: 888-401-6367 EXT 709 OR 801-362-2170 Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

BARKO 495ML

MARKETING DIRECTOR

Timbco EXL KENTUCKY WOOD445 EXPO Fri, 15 Sept Item - Sat,ID:1687930 Sept

Lexington, (‘09) (9.5K hrs) U/CKentucky at 80%. Head is the 40 degrees 33”

Item ID: 33905

Timbco barsaw head. Cummins 8.3L engine.

John Williams http://www.kfia.org/ nothing! (‘16) (4.2K hrs) Cummins engine, one gear box replaced at 3.5K hrs (888) 401-6367 ext. 701 and a recall on oil cooler. A/C - heat works, Big John hydraulic trailer, KentuckyWoodExpo.aspx j@lumbermens.co fully plated. Excellent conditions, turn-on ready!

Contact: JOE

DESIGN DIRECTOR Contact: JOE Donna Heninger

bells and whistles, its a production

Escanaba, Michigan

Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Needs

Email: Joe@lumbermensco.com THE PAUL BUNYAN SHOW Phone: 888-401-6367 EXT 709 Fri, 6 Oct 801-362-2170 - Sun, 8 Oct

Cambridge, Ohio www.ohioforest.org

** INFO LINK**

that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine

Tigercat 230Cuts 130 in ve1y good condition, Item ID: 71822 feet a minute also has CLT presses. (‘99) over-hauled.

Gear box and turntable are heat good, decent tires.

5.9L Cummins, joystick controls, SCTR &W 125 Band Mill with delimber.

No bucksaw.

Owner upgraded.

Item IDleaks, 13876.

Austin NEW, no no oil burning. x703 A/C -

Caterpillar generator - Low hours Contact: JOE on the mill, electronic computer Set Email: Joe@lumbermensco.com Phone:1/2" 888-401-6367 works,1 or 2" band,EXT 22ft.709 track

801-362-2170 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 19

L O G G I N G

The Tree that Started it All!

John Deere 540G3 SOUTHWEST FOREST PRODUCTS EXPO

Quadco 22B Hot Saw Head

“Precision Under Pressure”

CAT 518

Phone 315.284.4126 Item ID: 7750 Fax 315.849.2045 2012 model with very low hours, has only been used toWebsite cut softwood. www.empirehyd.com Email Contact: AUSTIN info@empirehyd.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Item ID: 97335

(11.7K hrs) (‘85 model) One original owner. It’s got a 4 cyl CAT engine, motor rebuilt 5yrs ago (1K hrs ago). Tires are at about 20% tread left, they skid fine. Winch works great, engine starts right on, no blow-by issues. Needs nothing, good reliable machine.

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

‘93 Barko 180B

‘16 Halverson H140 Timberjack 380C Grapple Item ID: 14077 Item ID: 69901 Austin Skidsteer (DEMO)5.9 Cummins, 12Contact: valve, 4 speed Clark transmission 4 forward 4 reverse, ex-

VALMET 840.2 FORWARDER Item ID: 9770

2005 model with 18000 frame hours, has new trunnion, & new rear bogie brakes installed last spring. Comes with 1 set of bear paws,1 set of ice chains, & 1 set of tracks.

Ph: (888) 401-6367 x703

Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

ternal tranny cooler, 28L’s, tranny less than 1000 hours, motor redone no blow by, centers redone recent, no leaks, dry very minor seep on valve body and grapple controls. Rear ends redone a year ago, full time 4 wheel drive, John Deere winch, good winch, strong winch! Call for more pictures!

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

Cat D5G with Winch Item ID: 107

2002 model with 7000 hours. Has log arch & winch! Everything in the undercarriage was just replaced besides the rails and one front idler.

‘95 John Deere C6 Contact: AUSTIN Tree Farmer Email: Austin@lumbermensco.com Item ID: Phone: 888-401-6367 EXT 13920 703 OR 931-797-8029

L O G G I N G

Timberking 458 Forwarder Item ID: 171

2005 model with 17,750 frame hours. Had new engine 13428 Ln. 1000 // hours PO Box and new super grip Victory grapple installed ago.

Working daily

Tigercat T240B Item ID: 4266

124 2006 model with 10,500 hours, has all new hoses, along Adams Center, NY 13606 with all repacked cylinders. In excellent condition.

Contact: AUSTIN Contact: AUSTIN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703

931-797-8029

931-797-8029

‘13 KMC 2500 Track Skidder

Contact: Austin Ph: (888) 401-6367 John Deere 648E x703

Item ID: 14078 1995 pin & Contact: Austin woods Ph: (888) 401-6367 x703

model in excellent condition, every bushing are new. Has not been in the capacity!.

Item worth ID 13421.

Sam done! x702 since having $20k of work

off onto a conveyor. This is a very

John Deere 640C

Sam x702 Item ID: 2539

Timberpro 735TL Item ID: 14279

‘83 John Deere 4850

2011 timber pro 735B 11800 hours, 20" quadco hotsaw, tracks/undercarriage 35% no leaks dry, no issues, everyday runner heat/air both work fire suppression system new goal drive new swing turner all hard stuff redone oil Item 14073 change everyID: 200 hours grease everyday

Contact: Austin

Contact: MARK Ph: (888) 401-6367 x703 Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703 with 1700 hours, in very good

Firewood Processor This very is well Hard to find 640C model, that’s-been maintained, tight center section, no leaks, a Chomper Model 16 PDA comes with a set of chains.

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

1999 John Deere 648G

Item ID 13644.

ItemSam ID: x702 8548

FIREWOOD PROCESSORS 11000 frame hours with new engine installed last year.

Has New turbo as well.

2010 Shop Built Wood Processor AUSTIN - Contact: It has a 353 Detroit diesel, 40 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT30703 inch insert tooth circle saw, foot

931-797-8029  Issue 364 382

automatice Contact: AUSTIN

firewood processor

Email: Austin@lumbermensco.com Item ID: JW-986495 with John Deere power unit with Phone: 888-401-6367 EXT 703 OR 931-797-8029 Contact: J Williams low hours. Control panel includes Ph: (888) 401-6367 x701

tach, oil pressure, water temp and

2000 Tigercat 845

amp Item gauges. logs up to 16”.

ID:Cuts 4497

chain conveyer, 8 way splitter,This oncutter has One owner comes all saw 4689 originaland frame hours, with with New 20,000lb goose neck trailer.

13916. Austin x703

Best Value Portable Log

pump installed 300 hours ago. Good Uncercarraige. Cab Item manuals and receipts. Purchased has ID AC but no Heat.

new for $32,500. Item ID 13865.

Contact: AUSTIN Email: Austin@lumbermensco.com Splitter Sam x702 Phone: 888-401-6367 EXT 703 OR 931-797-8029

- Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

LOGGING EQUIPMENT BANDIT540D 1988 John Deere

1999 Bandit 1900 Tracked Disc Item ID: 727

Rebuilt motor 1000 hours ago, Under tight center section, noatslip 13HP Honda motor. Manual start Chipper - Cat Carriage

but electronic option is

transmission, good winch. Tires are 23.1 x 26 with chains available. all around. 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Has Log Lift. Uses 4-way wedge Contact: AUSTIN adjustable to single two way.

Email: Austin@lumbermensco.com Great Well maintained. Item ID 13294.

Phone: 888-401-6367 EXT 703 OR 931-797-8029

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Sam x702

2004 Bandit Beast Model 4680 -

2008 Barko 495 ML

3412 Caterpillar Diesel engine Item ID: 7648 with 850 HP. 5300 hrs. in log deck. Has a hydraulic grapple, 11000 frame hours, and comes with csi Mill 264 Delimber. homemade processor with a 10’ chain and kicker that all

it is a tight and dry machine. runs Owner off statesgood condition.

Just finished

10

Contact: AUSTIN Acre clearing job, ready to work! of a 4 cylinder Mercedes power Email: Austin@lumbermensco.com

Remote control.

Big931-797-8029 production unit. Has a 4’ chain saw that kicks Phone: 888-401-6367 EXT 703 OR

Lumbermens™  since 1986

❘

BARKO

Contact: AUSTIN Email: Austin@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 703 OR 931-797-8029

well built processor. Item ID 13820.

‘05 Gehl CTL 70

Item ID: 6603

 List  seLL  exchange  buy  save

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

Volvo L50D

good. in good order. 22in Itemworking ID: 14263

kohing head. head works great.

2008 Volvo L50D and 5000 hours, bucket and forks, brand new quick connect, new starter, new battery, Item Sam x702cab heat/air, clean new acID that 13185. needs charged, enclosed

glass 50% tires, works real nice. Call for more pictures 1999 Barko 160D - new engine with Contact: MARK approximately 1500 hours. Hour Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 meter dont work. The last 2 owners

702-875-2703 have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

CAT 910C

Runs Great!.

Item 13740. Sam Item ID:ID 14264

x702 910 Cat 1978 transmission rebuilt, new clutch 1k hours

ago, dry, runs good, windows clean, forks, good woods machine, rife and kane tires off a combine tread is 5-6 inches deep, new battery. Call for more pictures

BELL

1990 Bell Super T - This Bell has MARK aContact: brandMark@lumbermensco.com new Duetz engine. Lever Email: Phone: 888-401-6367 EXTtranny 708 control, 33” bar, pump and

702-875-2703 ❘

 LumbermensCO.com

** CALENDAR**

2001 John Deere 435 Item ID: 7100

Loader is very tight and dry. It also comes with CTR bucksaw.

NY STATE

Fri, Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

WOODSMEN'S FIELD DAYS 18 August - Sun, 20 August

Boonville, New York www.starwebhosting.net/woodsmen/

Item ID: 8139

SOUTHWEST FOREST PRODUCTS Prentice 180 EXPO Fri, 25 August -Item Sat,ID: 267822 August

Hot Springs, Arkansas 94’ model with joystick control and bucksaw hookups. www.arkloggers.com 10000 total hours.

1999 model with 8200 Hours, UC is about 80%, has 36” pads. All filters were just changed, and cylinders repacked.

AUSTIN Contact: AUSTIN 72ND Contact: ANNUAL GREAT LAKES Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com has Phone: 888-401-6367 EXTEXPO 703 LOGGING & HEAVY EQUIPMENT Phone: 888-401-6367 EXT 703 OR 931-797-8029

Since 1986, Lumbermens published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

931-797-8029 Thurs, 7 Sept - Sat, 9 Sept

Escanaba, Michigan

John Deere 650J XLT Item ID: 5109

MID-ATLANTIC LOGGING & BIOMASS 2009 model with forestry package, has 6000 frame hours, with new John Deere installed engine 3 months ago. UC is Fri, 15 Sept - Sat, 16 Sept around 75%

Contact: AUSTIN

MID-ATLANTIC ADVERTISING SALESEmail: Austin@lumbermensco.com LOGGING & BIOMASS EXPO

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

Morris Woods Phone: 888-401-6367 EXT 703 OR 931-797-8029 (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR

John Deere 200CLC Item ID: 706

John Williams (888) 401-6367 ext. 7012004 Model with propac delimber, good j@lumbermens.co Machine has been well maintained.

DESIGN DIRECTOR Donna Heninger

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Prentice 210E

KENTUCKY Item WOOD ID:EXPO 8256 Fri, 15 Sept - Sat, 16 Sept

Knuckleboom loader. Needs new batteries and Lexington, Kentucky also needs the small gear on the Rotobec head.

It has saw and delimber hookups, but no saw nor http://www.kfia.org/ delimber. Ready to be shipped! Good machine, UC. KentuckyWoodExpo.aspx gets the job done, works as it should!

Contact: JOE

THE Email: PAUL Joe@lumbermensco.com BUNYAN SHOW Fri,Phone: 6 Oct 888-401-6367 - Sun, 8 OctEXT 709

801-362-2170 Cambridge, Ohio www.ohioforest.org

** INFO LINK**

BANDMILLS & HEADSAWS

CATResaw 525C- Roughly Danckaert Band Item ID: 4091 10 hours on this machine since it

2011 Model with around 8000 Hours, well maintained

and ready to work. has been rebuilt, it has a 24foot in

feed deck 20 foot out feed deck Contact: AUSTIN Email: Austin@lumbermensco.com with 44 inch wheels, andEXT all the Phone: 888-401-6367 703 bells and 931-797-8029 whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feetJohn a minute also has CLT XLT presses.

Deere 650K Item ID: 480 Item ID 13876. Austin x703 with Band 4300 Hours, has with forestry package, and S2013 & model W 125 Mill recently had new tracks, sprockets, idlers, and rollers

installed.

Caterpillar generator - Low hours

on the mill,AUSTIN electronic computer Set Contact: Email: Austin@lumbermensco.com works,1 1/2" or 2" band,EXT 22ft.703 track Phone: 888-401-6367

931-797-8029 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 21

L O G G I N G

The Tree that Started it All!

Tigercat 845

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

07 Prentice 950B

“Precision Under Pressure”

Phone 315.284.4126 Item ID: 5368 Fax 315.849.2045 3000 Original hours and has a new set of 30.5 Website Goodyear tires. www.empirehyd.com Email Contact: AUSTIN info@empirehyd.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

John Deere 648E Grapple Skidder Item ID: 82561

John Deere 648E grapple skidder, new crate motor with very few hours, 28L’s about 50%, 1 set bear claws, dry machine, no leaks, recently repacked cylinders, tight centers, very well maintained machine!

Call for more pictures!

TIMBERJACK 380

Item ID: 2323 ‘16 Halverson H140 Has the dual 100in. Exco grapple. Transmission is Eaton 3 speed powershift.

Engine has a new Skidsteer (DEMO) injection pump. Tires tread 40% on three tires, 10% on the oneID: tire. Good machine for the price and for Item JW-909632 the conditions.

Contact: J Williams Contact: JOE401-6367 x701 Ph: (888)

Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 801-362-2170

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

‘93 Barko 180B

Item ID: 14077 '94 John Deere 548E Contact: Austin Item ID: 14185 Ph: (888) 401-6367 x703 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

JD 648G III

96’ Hydro ax 611E

Item ID: 87294

Item ID: 4654

(8.8K hrs) (‘06) New wiring harness and injectors. The grapple won’t rotate all around, but goes up & down, pulls wood just fine. Motor was reman. 4K hrs ago (approx. 4yrs ago). Owner is getting out of logging.

‘95 John Deere C6 Contact: JOETree Farmer Email: Joe@lumbermensco.com

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Phone: 888-401-6367 EXT 13920 709 OR 801-362-2170 Item ID:

‘13 KMC 2500 Track Skidder

L O G G I N G

01’ Timberjack 460D Item ID: 345

BARKO

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT160B 703 OR 931-797-8029 1994 Barko - Electric

off onto a conveyor. This is a very

2003 model just completely serviced, has newer 120” esco Grapple, reman motor, and new hydraulic pump. Skidder is dry and currently working daily.

‘05 Gehl CTL 70

Contact: AUSTIN Email: Austin@lumbermensco.com Item ID: JW-986495 Phone: 888-401-6367 EXT 703 OR 931-797-8029

Contact: J Williams Ph: (888) 401-6367 x701 Item ID: 14236

chain 8 way 2014 John Deere 843K conveyer, 34x26 tires 70-80% runs assplitter, should lowon hour, Item ID: 14073 JD 22B head 20,000lb goose neck trailer.

Item ID Contact: Austin Contact: MARK 13916. Austin x703 Ph: (888) 401-6367 x703Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703 Best Value Portable Log Splitter

drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS CAT 515 Grapple Skidder

Brewco Saws - Two Brewco Saws Item ID: 14257

in excellent condition. Runs great.

around 7000 hours strong winch 50% rubItem IDEverything 13644. Sam ber 28's. worksx702 as it should. Woods ready, call for video!

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor Contact: MARK -Email: It has aMark@lumbermensco.com 353 Detroit diesel, 40 Phone: 888-401-6367 EXT 708 inch insert tooth circle saw, 30 foot

702-875-2703  Issue 364 382

Firewood Processor - This is a Chomper Model 16 PDA

- Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

1995 Barko 775 B Feller Buncher automatice firewood processor Contact: WALKER Email: Walker@lumbermensco.com - Pumps recently redone. 400 hrs with John Deere power unit with Phone: 888-401-6367 EXT 707 on injection pump. always started low hours. Control panel includes amp gauges. Cuts logs up to 16”.

approximately 1500 hours. Hour new for $32,500. Item ID 13865.

Contact: MARK Email: Mark@lumbermensco.com meter dont work. The last 2 owners Sam x702 888-401-6367 EXT 708 or 702-875-2703 only used it to load trucks or LOGGING EQUIPMENT Phone: have

BANDIT648L ‘15 John Deere

Item ID: 14237 1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins Contact: MARK Diesel. 7500 Hours. One owner.

Has Log Lift. Uses 4-way wedge Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703 adjustable to single two way. Great Well maintained.

Item ID 13294.

homemade processor with a 10’

Sam x702

2004 Bandit Beast 595 Model 4680 ‘14 Barko Item ID: 14238 3412 Caterpillar Diesel engine

2014 Barko 595 ML Magnum+ CSI 5300 264 Delimber CSI 4400 with 850 HP. hrs. 18’ Mill in ground log deck. Has a hydraulic grapple,

chain and kicker that all runs

saw 1402 hours, plated lines, hyrdraulic legs, tight, dry, runs as should, ready to work,good on pits trailer, cat kodiak grapple off condition.

Just finished 10

Acre clearing job, ready to work! of a 4 cylinder Mercedes power Contact: MARK Email: Mark@lumbermensco.com control.

Bigorproduction unit. Has a 4’ chain saw that kicks Phone: Remote 888-401-6367 EXT 708 702-875-2703

Lumbermens™  since 1986

❘

Item ID:head 14232 kohing head. works great.

hours a only 300 hours in the last year 65% tracks under sprockets 1999 Barko 160D - new engine with manuals and receipts. Purchased rollers good, everything works as it should. Call for more info

runs as should ready to go, dual arch, good winch

Firewood Processor - This is a

good. in good working order. 22in ‘11 John Deere 753J

John Deere 753J ID Hot saw processor tracked feller buncher, reguItem 13185.

Sam x702 One owner and comes with all2011 lar maintenance, owners manuals as well as mainatance records 7441

2015 John Deere 648L 44” tires 2267 hours 85-90% dry, tight, lowathour, 13HP Honda motor. Manual start Chipper - Cat Under Carriage

Value! PA. Item ID 12062. Sam x702

Item ID: 52342 (excellent condition.). Item ID

2011 model portable loader, has 8,631 hours on it.

13238. Chris x700 Woods ready.

tach, oil pressure, water temp and

‘14 John Deere 843K

quality chips with patented ‘Cone’

grapple, 5,000 original hours.

Knuckle Boom Loader

Sam x702

Item ID: 5458

condition. Easily produces high

knuckleboom, 30' boom, 75hp

motor, Rotobec continuous well built processor. Item ID 13820. 2011 437D John Deere

Franklin Q70

with 1700 hours, in very good

Cat 939C

Item ID: 52119

Item ID: 14078 98’ model with 9000 hours, and new undercarriage.

Contact: Austin capacity!. Item ID 13421. Sam x702 Ph: (888) 401-6367 x703 Contact: AUSTIN

13428 Victory Ln. // PO Box 124 Contact: AUSTIN Adams Center, NY 13606 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘83 John Deere 4850

Contact: Austin Ph: (888) 401-6367 x703

 List  seLL  exchange  buy  save

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

153 Fabtek Processor

CUMMINSItem continuous grapple.

ID: 8763 Runs Great!.

ID 13740.

Sam13133 2001 Fabtek 153, 4 Item roller fabtek harvester head,

frame hours, less than 500 hours on rebuilt motor,

x702 newer sprockets, new turn bank, resealed valve bank,

ready to work! Entire spare parts head included! Call for more pictures!

BELL

1990 Bell Super T - This Bell has Contact: MARK aEmail: brand Mark@lumbermensco.com new Duetz engine. Lever Phone: 888-401-6367 EXT 708 control, 33” bar, pump and tranny

702-875-2703 ❘

 LumbermensCO.com

** CALENDAR** Prentice 180 Item ID: 7822

1994 Model with 10,000 hours, joystick control, 6 cylinder Cummins motor, tight turn NYtable, STATE WOODSMEN'S FIELD DAYS and plumbed for a bucksaw.

Work ready

Fri, 18 August - Sun, 20 August

Contact: AUSTIN Email: Austin@lumbermensco.com Boonville, New York Phone: 888-401-6367 EXT 703 OR 931-797-8029

www.starwebhosting.net/woodsmen/

Cat 525

it All! Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 Since 1986, Lumbermens has published 702-875-2703 a monthly circular

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

'93 John Deere&548E MID-ATLANTIC LOGGING BIOMASS Item ID: 14184 Fri, 15 Sept - Sat, 16 Sept

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

72NDMARK ANNUAL GREAT LAKES Contact: Email: Mark@lumbermensco.com LOGGING & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 708 or 702-875-2703 Thurs, 7 Sept - Sat, 9 Sept

has been rebuilt, it has a 24foot in Contact: MARK feed deck 20 foot out feed deck Email: Mark@lumbermensco.com Phone: 888-401-6367 708 with 44 inch wheels, andEXT all the

702-875-2703 bells and whistles, its a production

Escanaba, Michigan

PUBLISHER

ADVERTISING SALES

Hot Springs, Arkansas

John Deere 700J dozer with winch, machine completely gone through www.arkloggers.com in spring. Enclosed with heat and air, excellent machine approx 3500 hours. Excellent working machine! Call for more pictures!

MID-ATLANTIC

LOGGING & BIOMASS EXPO

LUMBERMEN’S

MARKETING DIRECTOR

John Williams 2004 CAT 525B (888) 401-6367 ext. 701Equipment Item ID: 14204 j@lumbermens.co Digest

Contact: AUSTIN DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 703

EQUIPMENT REPS

Selma, North Carolina Contact: AUSTIN Email: Austin@lumbermensco.com www.midatlantic-logging-biomass­ Phone: 888-401-6367 EXT 703 expo.com/

PROTECT ALL ** Them INFO LINK** ® With Pro-Tec-To Wrap

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

Hydraulic Lines – Fuel Hoses – Air Lines Bell's Machining ..................... 27 Metal Detector's Inc. .............. 30 Electric Wire Bundles – Control Cables Brute Force Mfg. ..................... 31 Midwest Sharpening.............. 26

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine

in1994 ve1y good condition, Cuts 130B Timberjack 240 Item ID:74044 feet a minute also has CLT presses.

Equipment Digest '04 John Deere 700HLUMBERMEN’SItem IDSkidder.

13876. Austin x703 Lexington, Kentucky cable PO Box 11467,225 hours on Item ID: 14187 http://www.kfia.org/ a rebuilt engine.

S& 125 Band MillWinch with works Columbia, TNW 38402-1146 good. Woods ready.

KentuckyWoodExpo.aspx 1-800-477-7606 Fax (931) 388-3564 Contact: AUSTIN Caterpillar generator - Low hours Email: Austin@lumbermensco.com www.lumbermenonline.com Contact: WALKER on the mill, electronic computer Set THE888-401-6367 PAUL BUNYAN SHOW Phone: EXT 703 Email: Walker@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Fri, 6 Oct - Sun, 8 Oct Phone: 888-401-6367 EXT 707 Cat 3406 140KW Genset, 12,400 Cambridge, Ohio

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

that go up and down, with airbags,

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

www.ohioforest.org

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

machine, with air strain conveyers

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Mfg&..............................

32® SLEEVE Multitek ................................... 12 PRO-TEC-TO®Corley WRAP PRO-TEC-TO Piper's Saw Shop.................... 13 CRD Metalworks ....................

25 COSTS! CUT YOUR DOWNTIME AND YOUR

The Lumberman's Exchange is Against CW ............................ 40 Mill-ArmorHog ..............

17 Rotochopper Protection Pinching, Crushing, Rubbing & Abrasion published monthly by Woods EVEN are Impervious to Oils CW Mill-Hogzilla ...................

15 and RowSolvents.

Electric ............................ 20 Publishing, P.O.–Box 1916, UV RAYS! Both Columbia, TN 38402. All rights Dyna Products ........................ 35 Sawmill Exchange .................. 11 reserved. All editorial/ advertorial Provides Maximum Protection for Logging, For The Distributor submissions are used at the Empire Hydraulics ................... 8 Select Sawmill ......................... 19 Construction & Stationary Applications Like: discretion of the publisher and may Nearest You, Call be edited for purposes of clarity Great Lakes Mfg. .................... 34 Smith Sawmill ........................... 4 • Debarker Buggies • Pantograph Arms • Forklift Masts and space.

Although all efforts have • Wheel Loaders • Skidder • Knuckleboom Hahn MachineryLoaders ...................... 3 The Paul BunyanorShow been made to ensure accuracy of Grapples Visit......... 39 Fellerbuncher Heads • Harvesting Heads • Stroke content •submitted by advertisers www.pro-tec-toproducts.com Hurst Boiler ............................. 14 Thomas Industrial Controls..... 10 and writers, the Lumberman's Delimbers • Dozer Blades Exchange, its principles and Iron Bull ...................................

21 Union Grove Saw & Knife.. 2, 37 ® Anywhere Hoses associates, are not held liable & forWires Are – Pro-Tec-To Products OEM’s, Repair Facilities & errors orOffers omissions.

Reproduction, Maximum Protection, Lower Reduced KilgoreCosts, Saw .............................

22 Distributor UniversalInquires Refiner ................... 23 Welcome in wholeDowntime or part, is prohibited with­ and Less Spills!

Lignomat ................................. 24 WoodMizer ................................ l out written consent. ©2017 Woods Publishing

hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including 48" bottom saw and 36" top saw

STACKING RAC

800-355-1250

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 23

L O G G I N G

Cat 525 3304The engine, tires 65%, 13929 Tree hours brand new Started hydraulic pump. that

BANDMILLS & HEADSAWS

dry tight everything on sprockets roller idlers chains all tracks and undercarriage is 1 year old and 90% w/winch, winchBand has reverse 6-way- Roughly blade screens Danckaert Resaw and ropes open cab taken good care of 4900.7 hours.

10 hours on this machine since it

SOUTHWEST FOREST PRODUCTS EXPO 2009 John Deere 700J Dozer Fri, 25 August Sat, 26 August Item ID: 54715

Item ID: 14155

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at '06 John Deere 700J www.LumberMB\ISmagazine.com Item ID: 14194

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

'97 Hydro AX-411 EX Bar Saw Head

‘16 Halverson H140 Skidsteer (DEMO) 04’ TimberKing 540DS

Item ID: 98754

Heat works. Air needs charging.

Tires inc., great shape tires chains to go with it bear claws.

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

2011 CAT 525C

Item ID: JW-909632 Item ID: 14205 Contact: J Williams Contact: Ph: (888)AUSTIN 401-6367 x701

Item ID: 14203

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘93 Barko 180B

Item ID: 14077 Contact: Austin Prentice Ph: 98’ (888) 401-6367410E x703 Item ID: 14206

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

John Deere 444k Item ID: 9302

2009 model and is a one owner machine with 4900 original hours. Condition is like new. Ready to go to work.

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

Timbco 415 w/Fabtek Head

‘13 KMC 2500 Track Skidder

L O G G I N G

Item ID: 8837

‘89 Timberjack 380A

2001 timbco 415 fabtek 5head reabuilt head 5900 hours on rebuilt John Deere engine approx 22k frame 90% tracks and undercarriage. Ready to work. Call for 13428 Victory Ln. // PO Box more pictures!

Item ID:ID: 14078 Item 14039 Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703

124 Adams Center, NY 13606 Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Mid 90’s Husky Brute 335XL

ID:13421.

14088Sam x702 capacity!.Item Item ID

off onto a conveyor. This is a very

BARKO Contact: AUSTIN Email: Austin@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 703 knuckleboom, 30' boom, 75hp

Item ID: 99096 Sam x702

grapple, 5,000 original hours.

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

well T185 built processor.

Item ID 13820.

Rayco Hydra Stumper Firewood Processor - This 1998 Rayco T185 Hydra Stumper 185 hp JD engine w/lessisthan 50 hrs on total rebuild New cutter head pump, alternator & gauges. Rebuilt track drives &amain gearbox. Runs & works16 good.

Call for more picChomper Model PDA tures!

‘05 Gehl CTL 70

‘95 John Deere C6 Tree Farmer

automatice firewood processor

Contact: MARK Item ID: JW-986495 with John Deere power unit with Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703 Contact: J Williams low hours. Control panel includes Ph: (888) 401-6367 x701

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

Caterpillar

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 with 1700 hours, in very good

lbs, HP,and New Firestone chain conveyer, 8 way splitter,17,000 on One100 owner comes with all23 x 126, Power Shift New Hyd Pump, New 20,000lb goose neck trailer. Item ID Shaft, manuals receipts.

Purchased Winch Newand Hyd Park Brake.

13916. Austin x703 for $32,500. Item ID 13865.

Contact:new SAM Email: Sam@lumbermensco.com Best Value Portable Log Splitter Sam x702 Phone: 888-401-6367 EXT 702 - Small manufacturer in PA has LOGGING EQUIPMENT

on injection pump. always started Item ID: 2476 good. in good working order. 22in Product no. 4194, Cab with cold AC, kohing head. head works great.

SH56 Bunching Head, 28L-26 Tires At 60%, Center Tight, Runs Great, Item ID 13185. Sam x702 Machine Has New Injectors, New Fan Motors, 1999 Barko On 160D new engine And Clutch AC, -11,111 Hours. with approximately Contact: SAM1500 hours. Hour Email:dont Sam@lumbermensco.com meter work. The last 2 owners Phone: 888-401-6367 EXT 702 have only used it to load trucks or

quality chips with patented ‘Cone’

Handles logs up to 32”. Uses

delimber, grapple has been rebuilt.

‘83 John Deere 4850

‘00ID: Timberjack 1110 Item 14073 Item ID: 14033 Contact: Austin Ph: (888) 401-6367 x703 Contact: AUSTIN

condition. Easily produces high

drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

Johncondition.

Deere Runs 540B in excellent great.

Item ID: 0908 Item ID 13644. Sam x702 All FIREWOOD Refurbished!PROCESSORS 4K Original Hours!

2010 Shop Built Wood Processor SAM - Contact: It has a 353 Detroit diesel, 40 Email: Sam@lumbermensco.com inch insert tooth circle saw, 30 foot Phone: 888-401-6367 EXT 702  Issue 364 382

tach, oil Deere pressure, 540D water temp and John Item ID: 5613 amp gauges.

Cuts logs up to 16”.

made the best valued log splitter.

John

BANDIT Deere 437D Log Loader Item ID: 8834 1999 Bandit 1900 Tracked Disc

13HP Honda motor. Manual start - Cat Under Carriage Product Chipper No. 4204, Extra Clean, 10K at Hours, Stock Photo Delimber but electronic option is available.

50% or better. 475 hp Cummins Contact:Diesel.

SAM 7500 Hours. One owner.

Has Log Lift. Uses 4-way wedge Email: Sam@lumbermensco.com adjustable to single two way. Great Well maintained. Item ID 13294.

Phone: 888-401-6367 EXT 702 Value! PA. Item ID 12062. Sam x702 Sam x702 Firewood Processor - This is a

homemade processor with a 10’

2004 Bandit Beast425 Model 4680 2005 Timbco EXL Item ID: 14275 3412 Caterpillar Diesel engine

with 2015 sp761lf head 1000 hrs. hours Mill on head withharvester 850 HP. 5300 inand 2015 log deck. Has a hydraulic grapple, dasa 5 computer system frame hours 10,900 Undercarriage 75% no leaksgood dry, rebuilt final drive the other final drive10 is new, chain and kicker that all runs off condition.

Just finished engine has ECM, new swing drive gear box, new implement pump

of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that

Lumbermens™  since 1986

❘

Acre clearing job, ready to work!

Contact: MARK Email: Mark@lumbermensco.com Remote control. Big production kicks Phone: 888-401-6367 EXT 708 OR 702-875-2703

 List  seLL  exchange  buy  save

as a backup as needed. Has a CTR Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

96’ John BELL Deere 643D

Item ID: 14207 1990 Bell Super T - This Bell has Contact: AUSTIN a brand new Duetz engine. Lever Email: Austin@lumbermensco.com control, bar, pump and Phone:33” 888-401-6367 EXTtranny 703 ❘

 LumbermensCO.com

** CALENDAR**

Ecolog 590D Item ID: 874

L’S FIREWOOD PROCESSORS 2011 model with 12800 hours, has Logmax 6000B series Head. Lots of recent work done.

NY STATE Work ready!

Fri, Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

WOODSMEN'S FIELD DAYS 18 August - Sun, 20 August

Boonville, New York www.starwebhosting.net/woodsmen/ '94 CAT 518

Grapple Winch

PRODUCTS Timberpro TF 830C SOUTHWEST FOREST Item ID: 99807 EXPO The Tree that Started it All!

Item ID: 8077

Fri, 25 August - Sat, 26 August

2018 Timberpro combo 830c tier 3. Has 2018 SP 761 danglehead with top saw and 2018 supergrip 360 bucket, 2 sets of tracks, fire suppression, pre heater, LED lights, 700 hours working daily, under warranty until March of 2019

12k hours runs great tight center Hot Springs, Arkansas section www.arkloggers.com Contact: SAM

4000 SERIES

72ND ANNUAL GREAT LAKES Contact: MARK Email: Sam@lumbermensco.com Email: Mark@lumbermensco.com Since 1986, Lumbermens has LOGGING & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 702 Phone: 888-401-6367 EXT 708 OR 702-875-2703 published a monthly circular Thurs, 7 Sept - Sat, 9 Sept

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS 15 Sept - Sat, 16 Sept 5600Fri, Hours, 23.1 Tires.

Selma, North Carolina BELL’S FIREWOOD PROCESSORS www.midatlantic-logging-biomass­

Woods Publishing

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

John Williams • 67 HP CAT Diesel (888) 401-6367 ext. 701 Engine Item ID: 14208 j@lumbermens.co • 44” Circular Saw

feed deck 20 foot out feed deck Contact: MARK

Email: Mark@lumbermensco.com with 44888-401-6367 inch wheels, and Phone: EXT 708all ORthe

bells and 702-875-2703 whistles, its a production

pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine

4000 SERIES Danzco Delimber inPT20H ve1y good condition, Cuts 130 KENTUCKY WOOD EXPO Item ID: 14134 feet a minute also has CLT presses.

Fri, 15 Sept - Sat,720B 16 Sept TIGERCAT

Lexington, Kentucky Item ID: 542 http://www.kfia.org/ This feller buncher comes with a high speed "Quadco" cutter.

Odometer shows 7000hrs. 500hrs ago a new motor (rebuilt) KentuckyWoodExpo.aspx was installed. 90% tires tread. The A/C doesn’t work. It's been

BELL’S FIREWOOD PROCESSORS Many Models & Options to Choose From!

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct BELL’S FIREWOOD FIREWOOD PROCESSORS PROCESSORS Cambridge, Ohio EQUIPMENT REPS • 20” Diameter Contact: AUSTIN DESIGN DIRECTOR Capacity Email: Austin@lumbermensco.com • SingleDonna JoystickHeninger Phone: 888-401-6367 EXT 703 Control

it includes two sets of Mcdonough

parked for about 4-5 months. READY TO GO!!

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

• 30 Ton Splitter Cylinder Sam Wall

Excellent condition, motorx703 rebuilt about Item ID 13876.

Austin 300 hours ago less than 2700 original Shours & W 125 Band Mill with

Caterpillar generator - Low hours Contact: MARK on the mill, electronic computer Set Email: Mark@lumbermensco.com Phone:1/2" 888-401-6367 works,1 or 2" band,EXT 22ft.708 track

702-875-2703 Cat 3406 140KW Genset, 12,400

www.ohioforest.org Many Models & Options to Choose From! hours ready to run. Item ID 13434.

401-6367 ext. 702 • 67 HP CAT(888) Diesel 4000 SERIES Sam x702 • 67 HP CAT Diesel 4000 SERIES sam@lumbermens.co Engine Engine CARRIAGES & DRIVES FIREWOOD TUMBLER • 44” Circular Saw • 44” CircularWoods Saw Austin • 20” Diameter • ext.

Sturdy • 20” Diameter 2010 Cardinal HD Carriage (888) 401-6367 703 HSS Steel Welded FIREWOOD TUMBLER Capacity Capacityaustin@lumbermens.co • Sturdy HSS Steel Welded • 4’ Diameter Barrel Carriages (Sawmill) - Cardinal • Single Joystick Many Models & Chute Options to Choose From! 4000 •SERIES 4’ Diameter Barrel • HP CAT Diesel • Single Joystick 4000SERIES • 67 67Control • Clean Out MAILING ADDRESS • Clean Out Chute Carriage line it includes carriage Engine Control •Engine 30 Ton Splitter • Removes Debris & Bark as large B & B&Mfg . ...............................

Gauge .............................

28as 2 ¼” • Removes Debris Bark as large as 218¼”M&F P.O. Box 1916 • Circular • 44” 44” Saw Cylinder • 30 Ton Splitter with Lift onboard log turners, carriage • Works with all of our Double chain Hydraulic conveyors TN 38402-1916 • • 20” 20” Diameter • Works with allB.of Double chain Hydraulic Lift Mill, conveyors Cylinder Columbia, • Optional Honda Pack Available H. our Payne ..............................

16 Meadows IncPower . ................

33 drive, hyd pac for carriage, Capacity Capacity (888) 401-6367 • Optional Honda Power Pack Available Barko 495B • Single Single Joystick • Menominee Saw .....................

29 FIREWOOD TUMBLER Baker ......................................

5, 7 sawyers cab, computer controls, AD SUBMISSIONS Item ID: 44764 Control • Sturdy HSS Steel Welded • 67 HP CATControl Diesel 4000 SERIES May be sent to­ cabinet electronic drives forJohn • 30 30 Ton Splitter Machining •Bell's 4’ Diameter Barrel..................... 27 Metal Detector's Inc . .............. 30 2016 modelwith with 3900 hours, csi delimber on big Engine • morris@lumbermens.co Cylinder trailer fully plated.

Cylinder • Clean Out Chute • 44” Circular Saw carriage knees, husk including Many Models & Options to Choose From!

Force Mfg&. .....................

Sharpening.............. 26 •Brute Removes Debris Bark as large31 as 2 Midwest ¼” • 20” Diameter POSTMASTER Contact: 48" bottom AUSTIN saw and 36" top saw • Works with all of our Double chain Hydraulic Lift conveyors Capacity Email: Austin@lumbermensco.com Made In Buck Equipment (AIM) ........

36 Mor bark .....................................

9 Send address changes to: • Optional Honda Power Pack Available Many Models & Options to Choose From!

Canada Phone: 888-401-6367 EXT 703 • Single Joystick Lumberman's Exchange

931-797-8029 Corley Mfg ..............................

32 Multitek ...................................

12 Control P.O. Box 1916 • 30 Ton Splitter FIREWOOD TUMBLER Columbia, TN 38402 CRD Metalworks .................... 25 Piper's Saw Shop.................... 13 • Sturdy HSS Steel Welded Cylinder

BELL’S FIREWOOD PROCESSORS

** INFO LINK**

Many 4’ Diameterto Barrel Many Models Models &&• Options Options toChoose ChooseFrom!

From!

MadeCW In Mill-ArmorHog Please The Lumberman's Exchange is Rotochopper ..............Call 17 for Details ............................ 40 • Clean Out Chute Canada published monthly by Woods • Removes Debris & Bark as large as 2 ¼” FIREWOOD TUMBLER CW Mill-Hogzilla ...................

15 Hydraulic Row Electric ............................ 20 Publishing, P.O. Box 1916, • Works all of our Double chain Lift conveyors • Sturdy HSSwith Steel Welded In Power Pack Available • OptionalMade Honda Columbia, TN 38402. All rights • 4’Dyna Diameter Barrel or Canada visit us online www.bellsmachining.com Products ........................

35 Sawmill Exchange .................. 11 reserved. All editorial/ advertorial • CleanFIREWOOD Out Chute Financing Available TUMBLER submissions are used at the Empire Hydraulics ...................

8 as Select FIREWOOD TUMBLER Debris Bark as large 2 ¼” Sawmill ......................... 19 • Sturdy HSS&Steel Welded discretion of the publisher and may • Removes • Sturdy HSS Steel Welded • Works allMfg of our Double chain Hydraulic Lift conveyors • with 4’ Diameter be edited for purposes of clarity Great . Barrel ....................

34 Smith Sawmill ........................... 4 • Lakes 4’Honda Diameter Barrel • Clean Out Power Chute Pack Available and space. Although all efforts have • Optional • Machinery Clean Out Chute TheasPaul Hahn ......................

• Removes Debris & Bark as3large 2 ¼”Bunyan Show ......... 39 been made to ensurePlease accuracy Call of for Details • Removes Debris & Bark as large as 2 ¼” content submitted by advertisers • Works with all of our Double chain Hydraulic Lift conveyors Made In Works............................. with all ofPower our Double chain Hydraulic conveyors Hurst Boiler 14 Available Thomas IndustrialLift Controls ..... 10 and writers, the Lumberman's ••Optional Honda Pack Canada FIREWOOD•TUMBLER Optional Honda Power Pack Available Exchange, its principles and IronHSS BullSteel ...................................

21 Union Grove Saw & Knife.. 2, 37 • Sturdy Welded or visitareusnotonline www.bellsmachining.com associates, held liable for • 4’ Diameter Barrel errors or omissions. Financing Reproduction, Available Kilgore Saw ............................. 22 Universal Refiner ................... 23 • Clean Out Chute in whole or part, is prohibited with­ • Removes Debris & Bark as large as Lignomat .................................

24 2 ¼” WoodMizer ................................ l out written consent.

Please Call• for Details Works with all of our Double chain Hydraulic Lift conveyors Made In ©2017 Woods Publishing • Optional Honda Power Pack Available Canada

1-888-995-1965

STACKING RAC

Many Models & Options to Choose From!

Please Call for Details

1-888-995-1965 888-995-1965

nline www.bellsmachining.com Financing Available

1-888-995-1965  SELL YOUR EQUIPMENT TODAY

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

l§ SELL EQUIPMENT TODAY MadeYOUR In or visit us online www.bellsmachining.com Canada Made In Canada Financing Available

❘

 24/7 SUPPORT 0 SUPPORT

Tigercat 604 Cable Skidder Item ID: 6552

approx. 7000 frame hours, brand new log arch, new fuel filter, new engine, new water pump, new pick up pump, new injector pump, 5-1000 hours on the new motor, very tight, very dry machine, Clark winch, stout winch 30% tires comes with set of chains at 80% Excellent machine Call for more pictures and video!

Contact: MARK Email: Mark@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 708 I S73.663.7711 800.S48.6914 702-875-2703 ❘ L!  (888) 401-MENS 401-MENS

NO. 25

L O G G I N G

• 67 HP CAT Diesel Engine • 44” Circular Saw • 20” Diameter Capacity • Single Joystick Control • 30 Ton Splitter Cylinder

Contact: SAM Email: Sam@lumbermensco.com expo.com/ Phone: 888-401-6367 EXT 702

International TD15 BELL’S FIREWOOD PROCESSORS 4000 SERIES Bull Dozer MARKETING DIRECTOR

Item ID: 1876

BANDMILLS & HEADSAWS

two 2001 660 timberjack grapple skidders. Working machine has tigercat bunching grapple on it, dual arch machines, one has two nice double diamond chains, dry Machines, 3000 Danckaert Band Resaw - Roughly hours on rebuilt 8.3 cummins engine, brand new $8k dollar hydraulic pump 1 1/2 week ago, the other machine 10 hours on this machine sincehydraulic it pump is at approx 200, CAB IS BURNT, everything else on machine is in good working order. Selling only because mahas rebuilt, it has 24foot chinesbeen are too big.

Package Only Call foramore picturesin

machine, with air strain conveyers '13 John Deere PROCESSORS 548G III BELL’S FIREWOOD that go up and down, with airbags, Item ID: 8789

PUBLISHER

ADVERTISING SALES

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com 660 Grapple Skidder

“Precision Under Pressure”

892 Valmet Forwarder

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Item ID: 4040

1995 Valmet 892 forwarder Volvo td6 motor, motor rebuilt appox 4000 hours ago, dry doesn't burn any oil Put sure-grip controls in it and all new windows resealed valve body for hydraulic functions and resealed the jib cylinder bought just for a backup machine hardly used it Call for more pictures!

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703

‘16 Halverson H140 '96 CAT 515 Log Skidder

John Deere 753J

Item ID: 7534

Skidsteer (DEMO)

Item ID: 14258

REDUCED PRICE! Single Arch Glass Cab, 28L X 26 Item ID: JW-909632 Tires 50/40%, New Bear Paws On Front, Ice Chains Rear, Esco 84’ Grapple, New Cutting Edge On Blade, Contact: J Williams All Cylinders Just Rebuilt, 12,800 Hrs.

2013 John Deere 753J with Quadco 360 hotsaw head 3,215 hours. Everything runs and works as it should

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

Ph: (888) 401-6367 x701

Contact: SAM • Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: ‘80 (888) 401-6367 John Deerex703 550 Item ID: 14037

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

'07 John Deere 848H Grapple Skidder Item ID: 6566

Product No. 1876, 11,066 Frame Hours, New Engine At 8,800 Hours, Dual Arch Winch, Chains On All Four Tires, Working Daily In Woods.

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

L O G G I N G

‘13 KMC 2500 Track Skidder

‘14 B66TD Rotochopper

Item ID: ID: 14078 Item 13838 Contact: Austin Contact:Ph: SAM (888) 401-6367 x703

12’ JohnVictory Deere 437D 13428 Ln. // PO Box 124

Item ID: 14209 Adams Center, NY 13606 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

grapple, 5,000 original hours.

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 with 1700 hours, in very good condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws Franklin 2005 Q70 Item ID: 5579 in excellent condition. Runs great.

Item 13644.New SamRubber, x702 Heat/ LowID Hours!

ACFIREWOOD Takes No Oil. Great Running PROCESSORS Skidder.

2010 Shop Built Wood Processor

SAM - Contact: It has a 353 Detroit diesel, 40 Email: Sam@lumbermensco.com inch insert tooth circle saw, 30 foot Phone: 888-401-6367 EXT 702  Issue 364 382

Item ID: JW-986495 Contact: SAMwith • Email: JohnSam@lumbermensco.com Deere power unit with EXT 702 Contact: J Williams Phone: 888-401-6367 low hours. Control panel includes Ph: (888) 401-6367 x701 tach, oil pressure, water temp and

chain conveyer, 8 way splitter,It on has

Timberjack 1270C amp gauges. Cuts logs up to 16”.

a

Item ID: 8676 One owner and comes with all Timberjack 762C head with a Timberjack 3000

computer. It comes with an extra set of delimbing knives and 20,000lb goose neck trailer. Item ID manuals and receipts. Purchased book on the head.

13916. Austin x703

Best Value Portable Log

new for $32,500. Item ID 13865.

Contact: JOE Email: Joe@lumbermensco.com Splitter Sam x702EXT 709 OR 801-362-2170 Phone: 888-401-6367

- Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

LOGGING EQUIPMENT BANDIT '92 CAT 518

Item ID: 14198 1999 Bandit 1900 Tracked Disc

1992 CAT 518 6000 original frame hours! Carriage Rebuilt motor 13HP Honda motor. Manual start Chipper - Cat Under atand transmission with less than 1000 hours, excellent winch, great machine.

Callor forbetter. video 475 hp Cummins but electronic option is available.

50%

Diesel.

7500 Hours. One owner.

Has Log Lift. Uses 4-way wedge Contact: MARK Email: Mark@lumbermensco.com adjustable to single two way. Great Well maintained.

Item ID 13294.

Phone: 888-401-6367 EXT 708 or 702-875-2703 Value! PA. Item ID 12062. Sam x702 Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple,

2004 Bandit Beast Model 4680 3412 engine ‘97Caterpillar TimbcoDiesel 425D ID:5300 13950 with Item 850 HP. hrs. Mill in

chain and kicker that all runs off condition. Just finished 10 Contact:good AUSTIN Email: Austin@lumbermensco.com Acre clearing job, ready to work! of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 Remote control. Big production unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

CurrentlyItem has ID 3316 hours. capacity!.

13421.

Sam x702

SamItem x702 ID: 7698

‘05 Gehl CTL 70

10’ John Deere 648H

Item ID: 14110

off onto a conveyor. This is a very

Firewood - This Product No. 1707, 3304 CATProcessor Engine 1-1/2 Yearsis Old, New Oil Cooler, Rebuilt Radiator, New Injector Pump, New a Chomper Model 16 PDA Hydraulic Pump, New Main Lines, New Arch, New Blade Plate, Good Air Brakes. automatice firewood processor

Item ID: 14073 Item ID: 14210 Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703

Item ID: 13920 Contact: Austin Ph: (888) x703 90’ CAT 401-6367 213 Excavator

BARKO Contact: AUSTIN Email: Austin@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 703 knuckleboom, 30' boom, 75hp

Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

well built processor.

Item ID 13820.

'94 CAT 518C Cable Skidder

‘83 John Deere 4850

‘95 John Deere C6 Tree Farmer

 List  seLL  exchange  buy  save

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item‘05 ID 13185.

Sam x702608B Timberjack Item 13898 1999 Barko 160DID: - new engine with

Contact: SAM1500 hours. Hour approximately Email: Sam@lumbermensco.com meter dont work. The last 2 owners Phone: 888-401-6367 EXT 702 have only used it to load trucks or as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

525Dgrapple.

CUMMINS CAT continuous Item ID: 9555 Runs Great!. Item ID 13740. Sam

(7.5K hrs) Brand new CAT transmission approx. 2000hrs ago.

CAT itself rebuilt the engine approx. 600hrs ago. Tires size x702

30.5 32 tire w/85% tread remaining. Dual arch with a winch.

Being used everyday! No issues! Very nice machine! Clean and tight!

BELL

1990 Bell Super T - This Bell has Contact: JOE aEmail: brandJoe@lumbermensco.com new Duetz engine. Lever Phone: 888-401-6367 EXTtranny 709 control, 33” bar, pump and

801-362-2170 ❘

 LumbermensCO.com

** CALENDAR**

‘97 Timberjack 240D Item ID: 13917

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

FOR CLASSIFIEDS 93’ Prentice 210

CallItem 888.401.MENS ID: 14216 Contact: AUSTIN See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Email: Austin@lumbermensco.com Fri, 18 August - Sun, 20 August Location of all equipment at Phone: 888-401-6367 EXT 703 Boonville, New York www.LumberMB\ISmagazine.com www.starwebhosting.net/woodsmen/

The Tree that Started it All!

BANDMILLS & HEADSAWS SOUTHWEST FOREST PRODUCTS EXPO Danckaert Resaw - Roughly Fri, 25 August - Sat, 26 August 2011 JohnBand Deere 648H

‘99 Hydro-Ax 511 EX Item ID: 13799

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

EQUIPMENT REPS

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

Contact: AUSTIN Email: Austin@lumbermensco.comTHE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct Phone: 888-401-6367 EXT 703

in ve1y good condition, Cuts 130

Timberjack 230 Item ID 13876. Austin x703 Item ID: 1977 S & W 125 Band Mill with Contact:Caterpillar AUSTIN generator - Low hours Email: Austin@lumbermensco.com on the mill, electronic Set Phone: 888-401-6367 EXT 703computer OR 931-797-8029 works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Shrink Wrap ** INFO LINK** FireWOOD/WaSteWOOD

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Corley Mfg 32 Multitek Sell Your WOOD –.............................. $300/cord or ...................................

More! 12

Double or triple your profits by shrink wrapping wastewood - foreCW Mill-ArmorHog .............. 17 Rotochopper............................ 40 wood with WOOD-PAKer! Attractive various size packages can be CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 obtained with our high production, easily operated and affordable Dyna Products ........................ 35 Sawmill Exchange .................. 11 machines. Eight machines available. The ideal equipment for producEmpire Hydraulics ................... 8 Select Sawmill ......................... 19 ing square bundles-palletizable for ease in storage and transporting.

Great Lakes Mfg. .................... 34 Smith Sawmill ........................... 4 Inquire for free details. Video and Package samples at nominal fee.

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

B & B Manufacturing Hurst • 3007 West River Road • Olean, NYControls 14760 Boiler .............................

14 Thomas Industrial ..... 10

Toll Free 1-800-654-5320 Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat .................................

24 WoodMizer ................................ l E-mail: bbmfg@verizon.net • Web: www.bbmfg.org

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

feet a minute also has CLT presses.

 24/7 SUPPORT 0 SUPPORT

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage,

2004 Timbco 445EXL

sawyers cab, computer controls, Item ID: 14170

‘97 Timberjack 360C

cabinet with electronic drives for 85% Undercarriage. carriage knees, husk including Contact: AUSTIN 48" bottom and 36" top saw Item ID:saw 14044 Email: Austin@lumbermensco.com Contact: Sam Phone: 888-401-6367 EXT 703

STACKING RAC

Ph: (888) 401-6367 x702

John Deere 548D

Item ID: 14024 Contact: Sam ‘80 John Deere 540B Item ID: 11345 Ph: (888) 401-6367 x702 Contact: AUSTIN Email: Austin@lumbermensco.com Has a 2000 hour warranty. It comes www.BakerProducts.net Phone: 888-401-6367 EXT 703 800.S48.6914 I S73.663.7711 mounted on 30.5 tires at 95%.

with401-MENS a 22” tower head. ❘ Comes  (888) NO.Item 27 L! 401-MENS ID 13864. Sam x702 2015 John Deere 748L - This is

L O G G I N G

Contact: MARK DESIGN DIRECTOR Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 Donna Heninger

702-875-2703

12’ John Deere 843K Item ID: 14212

that up and down, with airbags, 07’goTigercat 724E Item two ID: 14218 it includes sets of Mcdonough

pressure guides. Top Casting wheel Contact: AUSTIN Selma, North Carolina Email: Austin@lumbermensco.com www.midatlantic-logging-biomass­ is supported on both sides. This Phone: 888-401-6367 EXT 703 expo.com/ is an extremely accurate machine

Item ID: 3577

j@lumbermens.co

machine, with air strain conveyers

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

morris@lumbermens.co

Cat 518, approx 12,000 frame hours, 1500 on rebuilt engine and transmission, center pins are tight, dry maMARKETING DIRECTOR chine, currently working 28L's 30%, seller has 23.1's at John 80% or better that he can Williams include for an extra $4k, seller is retiring(888) from logging.

Call for more pictures!

401-6367 ext.

701

bells and whistles, its a production

Escanaba, Michigan

PUBLISHER

Woods CAT(888) 518Morris Grapple Skidder 401-6367 ext. 704

been rebuilt, it has a 24foot in Contact:has AUSTIN Email: Austin@lumbermensco.com feed deck 20 foot out feed deck 72ND ANNUAL GREAT LAKES Phone: 888-401-6367 EXT 703 with 44 inch wheels, and all the LOGGING & HEAVY EQUIPMENT EXPO

Thurs, 7 Sept - Sat, 9 Sept

Woods Publishing

ADVERTISING SALES

ItemonID: 14217 10 hours this machine since it

Hot Springs, Arkansas www.arkloggers.com

John Deere 648G III

“Precision Under Pressure”

PRENTICE 410EX

Phone 315.284.4126Item ID: 2929 Fax (12K hrs) Front tires new, back tires 75% remaining tread.

315.849.2045 Transmission has an issue: it is s as if every other gear Website didn't work (2nd, 4th... etc...), therefore going to sell as-is www.empirehyd.com (cheaper) Email Contact: JOE info@empirehyd.com Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

Item ID: 3280

Tight machine, no issues! It sits on a Pitts-trailer and it's currently operating, everyday! Owner just installed a brand new grapple on July 11. A/C not working properly, tires tread 60%. Works and runs smoothly. READY TO GO!

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

‘16 Halverson H140 Skidsteer (DEMO)

BELL Super T Item ID: 6145

‘93 Barko 180B Item ID: 14077

‘93 John Deere Contact: Austin 548E

14083 x703 Ph: Item (888)ID: 401-6367 Item ID: JW-909632 Contact: AUSTIN Contact: J Williams Email: Austin@lumbermensco.com Ph: (888) 401-6367 x701 Phone: 888-401-6367 EXT 703

It has a Deutze engine, lever controls, undercarriage is NEW along w/motor & transmission re-done approx. 1,000hrs ago.

It has a 32in. BELL head. In really great conditions and being used daily. A/C - heat works good. Everything in working order.

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

‘94 Caterpillar 320 Item ID: 13936

L O G G I N G

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘13 KMC 2500 Track Skidder 2012 Cat D6K XL

Item ID: ID: 14078 Item 14169 Contact: Austin Contact:Ph: AUSTIN (888) 401-6367 x703

‘11 Tigercat 620D 13428 Victory Ln. // PO Box 124

Item ID: 13929 Adams Center, NY 13606 Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam611 x702Ex-Hydro Ax ‘98

Firewood ItemProcessor ID: 13948- This is

‘05 Gehl CTL 70

‘83 John Deere 4850

‘1414073 CAT 535C Item ID: Item ID: 13840 Contact: Austin Contact: SAM Ph: (888) 401-6367 x703

Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 with 1700 hours, in very good condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

a Chomper Contact: AUSTIN Model 16 PDA Email: Austin@lumbermensco.com automatice firewood processor Phone: 888-401-6367 EXT 703 with John Deere power unit with

low hours. Control panel includes

tach, oil pressure, temp and 210 Terex Wheelwater Loader

Item ID:Cuts 14283 amp gauges. logs up to 16”.

2013 210 terex loader .

1560.

Excellent chain conveyer, 8 way splitter, on One owner and comesHrs with all condition everything works as should!

20,000lb goose neck trailer. Item ID manuals and receipts. Purchased 13916. Austin x703

Best Value Portable Log

Contact: MARK new for $32,500. Item ID 13865.

Email: Mark@lumbermensco.com Phone: 888-401-6367 Splitter Sam x702 EXT 708 OR 702-875-2703

LOGGING EQUIPMENT BANDIT 1999 Bandit 1900 ‘05 TigercatTracked 230B Disc

- Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

Item ID: Under 13911Carriage at Chipper - Cat

13HP Honda motor. Manual start

but electronic option is available. or better. 475 hp Cummins Contact:50% AUSTIN Email: Austin@lumbermensco.com Diesel. 7500 Hours. One owner.

Has Log Lift. Uses 4-way wedge Phone: 888-401-6367 EXT 703 adjustable to single two way. Great Well maintained. Item ID 13294.

01’ Ponsee Bison in excellent condition. Runs great.

Forwarder

Value! PA. Item ID 12062. Sam x702

FIREWOOD PROCESSORS Comes with a set of tracks.

log deck. Has a hydraulic grapple,

Item Sam ID: 14109 Item ID 13644. x702

2010 Shop Built Wood Processor AUSTIN -Contact: It has a 353 Detroit diesel, 40 Email: Austin@lumbermensco.com inch insert tooth circle saw, foot Phone: 888-401-6367 EXT30 703  Issue 364 382

Firewood Processor - This is a

homemade processor with a 10’

Sam x702

2004 Bandit Beast Model 4680 -

Caterpillar Diesel engine 90's3412 Model Timberjack 240A ID:5300 14111 with Item 850 HP. hrs. Mill in

chain and kicker that all runs off condition. Just finished 10 Contact:good WALKER

Email: Walker@lumbermensco.com Acre clearing job, ready to work! of a 4 cylinder Mercedes power Phone: 888-401-6367 Remote control.EXT Big707 production unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

 List  seLL  exchange  buy  save

‘95 John Deere C6 Tree Farmer Item ID: 13920 Contact: Austin CAT 559C Ph: (888)Item 401-6367 ID: 269 x703

(11.5K hrs) Comes with the 426 CTR delimber.

Needs nothing. Clean tight, no slack, turn gear tight! Working everyday.

capacity!. Item ID 13421. Sam x702 Contact: JOE BARKO Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 1994 Barko 160B - Electric

801-362-2170 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID‘89 13185. x702 CATSam D4H LGP Item ID: 13999 1999 Barko 160D - new engine with

Contact: AUSTIN approximately 1500 hours. Hour Email: Austin@lumbermensco.com meter dont work. The last 2 owners Phone: 888-401-6367 EXT 703 have only used it to load trucks or as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

‘85 John BELL Deere 440D

Item ID: 12453 1990 Bell Super T - This Bell has AUSTIN aContact: brand new Duetz engine. Lever Email: Austin@lumbermensco.com control, 33” bar, pump and tranny Phone: 888-401-6367 EXT 703 ❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

'01 John Deere 648G3 Item ID: 90899

The Tree Excellentthat Condition Low Price!

Started Contact: SAMit All!

Email: Sam@lumbermensco.com Since 1986, Lumbermens Phone: 888-401-6367 EXT has 702

published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

John Deere 437C SOUTHWEST FOREST PRODUCTS EXPO Item ID: 1020 Fri, 25 August - Sat, 26 August Prentice 384 with 2010 model with 8500 hours, comes with a bucksaw, Hot Springs, Arkansas Bucksaw & Delimber has never had a delimber mounted on it and primarily Contact: AUSTIN 72NDContact: ANNUALAUSTIN GREAT LAKES Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 LOGGING & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 703

931-797-8029

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co John Deere 548G3

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

‘03 John Deere 748GIII

Contact: AUSTIN DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 703

931-797-8029

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

j@lumbermens.co

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Item ID: 13851

bladebeen good, centers good. foravideo! has rebuilt, itCall has 24foot in

Contact: MARK feed deck 20 foot out feed deck Email: Mark@lumbermensco.com with 44 inch wheels, andEXT all the Phone: 888-401-6367 708

702-875-2703 bells and whistles, its a production

that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Item ID532 13876.CAT Austin x703 Feller

Lexington, Kentucky http://www.kfia.org/ 06’ Franklin Q80 Item ID: 14214 KentuckyWoodExpo.aspx Contact: AUSTIN

THE Email: PAUL Austin@lumbermensco.com BUNYAN SHOW Fri,Phone: 6 Oct888-401-6367 - Sun, 8 OctEXT 703 Cambridge, Ohio www.ohioforest.org

** INFO LINK**

1989 John deer Skidder,since good strong 10 hours on 540D this Cable machine it winch, 23.1 tires, motor rebuilt about 4 years ago,

Buncher S & W 125 Band Mill with Item ID: 14079 Caterpillar generator - Low hours Contact: on the mill,AUSTIN electronic computer Set Email: Austin@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702 ‘05 Transport Trailers Custom Log Pup Item ID: JW-538174 CARRIAGES & DRIVES

B. H. Payne .............................. 16

Cardinal HD Carriage Contact:2010 SAM Email: Sam@lumbermensco.com Carriages (Sawmill) - Cardinal Phone: 888-401-6367 EXT 7021 Carriage line it includes carriage M&F Gauge ............................. 28 with onboard log turners, carriage Meadows Mill, Inc. ................ 33 drive, hyd pac for carriage,

Baker ...................................... 5, 7

Menominee Saw ..................... 29

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

Brute Force Mfg. ..................... 31

carriage knees, husk including Item 13818 Midwest Sharpening..............Contact: 26 SAM ID: 48" bottom saw and 36" top saw Contact: Sam Email: Sam@lumbermensco.com Morbark ..................................... 9 Phone: 888-401-6367 EXTExt. 702 603 (888) 401-6367 Schutte Hammermill12 Multitek ...................................

B & B Mfg. ............................... 18

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36 CRD Metalworks .................... 25

Grinder Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper ............................ 40 Contact: Austin

Corley Mfg .............................. 32

Item ID: 13965

CW Mill-Hogzilla ................... 15

Ph: Electric (888) 401-6367 x703 20 Row ............................

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3 Hurst Boiler ............................. 14 Iron Bull ................................... 21 Kilgore Saw ............................. 22 Lignomat ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

John Deere 437E The Paul Bunyan Show ......... 39

Item ID: 9508 Thomas Industrial Controls .....is 10 (1K hrs) Clean machine, everything tight.

Owner is getting out of the logging business and Union loweringGrove paymentsSaw ASAP & Knife .. 2, 37

Universal Refiner ................... 23 Contact:Caterpillar JOE 2013 Email: Joe@lumbermensco.com WoodMizer ................................

Phone: 888-401-6367 EXT 709l 535C

801-362-2170 Item ID: 13868

 SELL YOUR EQUIPMENTContact: TODAY Sam ❘ 0  24/7 SUPPORT l§ TODAY SUPPORT

Ph: (888) 401-6367 x702

‘01 Benson 34’ End Dump cabinet with electronic Item ID: 14004 drives for sawyers cab, computer ‘05 CAT TK560 controls,

STACKING RAC

Ponsse Ergo Mag 64-knive Item ID: 7720 Source Grinder 12k frame hours, 2000 hours on new $30k Mercedes diesel engine, H73 head, head rotator just rebuilt, slewItem ID: 14007 ing system for crane rebuilt 2k hours ago, main pump resealed about 1kAustin hours ago, comes with set of tracks!

Contact: Currently working, buying newer. Call for more Pictures Ph: (888) 401-6367 x703

Contact: MARK Email: Mark@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 708 swing motor.

Has new jet fit I S73.663.7711 800.S48.6914 702-875-2703 system. This machine is loaded... ❘ has pro-heat (888) 401-MENS NO. 29 L! 401-MENS system for cold

weather start. Has fire suppression

L O G G I N G

Williams This skidder has John 4700 original hours and comes with a winch. Cab has heat & ac, tires are ext.

23.1 26.701 In excellent (888) 401-6367 condition!

18440 DanckaertItem BandID: Resaw - Roughly

in ve1y good condition, Cuts 130

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

Item ID:DIRECTOR 985 MARKETING

John Deere 540D BANDMILLS & HEADSAWS Cable Skidder

machine, with air strain conveyers

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

ADVERTISING SALES

www.arkloggers.com Item ID: 14213

been used around a sawmill.

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

210D Knuckleboom Loader on Truck

2004 CAT 517 Grapple Dozer

Item ID: 6694

Item ID: 70690

cat 517 swing boom grapple, enclosed cab, heat/air air needs a recharge, 8’ 6 way blade, 24” pads, good rollers, good sprockets, needs pads and turner pins, 4554 hours, majority of the last 2000 hours have been grading behind an excavator, very little logging. Call for pictures and video!

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

'94 Barko 160 Knuckleboom Item ID: 14186

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘16 Halverson H140 Skidsteer (DEMO)

replaced motor last year, 12,817 frame hours, leak on valve bank o ring, everything works as should, needs AC recharge, slasher grind saw 60"circle saw, truck runs good, clutch is a little loose, Is plumbed for groundsaw, new blower, 4x6 square tubing secures loader to frame, trailer frames great loader and truck!

Item ID: JW-909632

Contact:MARK J Williams Contact: Ph: (888) 401-6367 x701 Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

‘93 Barko 180B

Item ID: 14077 Contact: Austin ‘04 JCB 441 Wheel Ph: (888) 401-6367 Loader x703 Item ID: 13888

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘08 John Deere 335C Item ID: 14089

‘95 John Deere C6 Tree Farmer

L O G G I N G

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘99 Case 850G Long 13428 Victory Ln. // PO Box 124 ‘89 Timberjack 230A Track Dozer Item ID: 13909NY 13606 Adams Center,

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Item ID: 13885

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

off onto a conveyor. This is a very

well built processor. Item ID 13820.

“13 KMC 2500 Tack Skidder Item ID: 14078

Contact: AUSTIN ‘05 Gehl CTL 70 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Item ID: JW-986495

‘83 John Deere 4850

Contact: J Williams Ph: (888) 401-6367 x701

'09 John Deere 753J Buncher ID: 14106 chainItem conveyer, 8 way splitter, on

Item ID: 14073 Contact: Austin Contact:20,000lb AUSTINgoose neck trailer. Item ID Email: Austin@lumbermensco.com 13916. Austin x703 Ph: (888) 401-6367 x703 Phone: 888-401-6367 EXT 703 Best Value Portable Log Splitter

with 1700 hours, in very good

condition. Easily produces high

- Small manufacturer in PA has

made the best valued log splitter.

‘00 Timbco quality chips with patented ‘Cone’ Handles 445D logs up to 32”. Uses Item ID: 14096 drum design. Can easily load 42’ 13HP Honda motor. Manual start

Contact: AUSTIN vans and produce 6 - 8 loads per but electronic option is available.

Email: Austin@lumbermensco.com day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge Phone: 888-401-6367 EXT 703 EDGERS & GANGS adjustable to single two way. Great Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor 2015 Cat 525Dwith a 10’ ItemHas ID: a14167 log deck. hydraulic grapple,

Contact:chain AUSTIN 2010 Shop Built Wood Processor and kicker that all runs off - It has a 353 Detroit diesel, 40Email: Austin@lumbermensco.com of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 inch insert tooth circle saw, 30 foot unit. Has a 4’ chain saw that kicks  Issue 364 382

Lumbermens™  since 1986

❘

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Sam x702

‘09 John Deere Firewood Processor - This is 650J XLT

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID

‘95 Bell Ultra T

a Chomper Model PDA Item ID: 16 14091

automatice firewood processor Contact: AUSTIN Email: Austin@lumbermensco.com with John Deere power unit with Phone: 888-401-6367 EXT 703 low hours. Control panel includes

13238. Chris x700 Item ID: 14070

1995 BarkoAUSTIN 775 B Feller Buncher Contact: -Email: PumpsAustin@lumbermensco.com recently redone. 400 hrs Phone: 888-401-6367 EXT 703 on injection pump. always started

in good working order.III 22in tach, oil pressure, water temp and Johngood.

Deere 648G Series amp gauges. Cuts logs up to 16”.

kohing head.

Item ID:head 4351works great.

& transmission has been rebuilt.

Front and rear Item ID 13185.

Sam x702 ends have been gone thru. Cold air/heat works, radio but needs antenna!

Rear- new tires are NEW, front 1999 an Barko 160D engine with tires 70% tread.

One owner and comes with allMotor works manuals and receipts. Purchased

new for $32,500. Item ID 13865.

Sam x702

approximately 1500 hours. Hour

Contact: JOE Email: Joe@lumbermensco.com meter dont work. The last 2 owners Phone: 888-401-6367 EXT 709 OR 801-362-2170

LOGGING EQUIPMENT BANDIT

have only used it to load trucks or

as a backup as needed. Has a CTR

'92 CAT 518C Cable Skidder

delimber, has been rebuilt.

Itemgrapple ID: 14107 Boom cylinders have minor leaks.

Chipper - Cat Under Carriage at Hard to Find “C” model in great shape!

Item ID 13694. Sam x702 50% or better. 475 hp Cummins 1999 Bandit 1900 Tracked Disc

Contact: 94AUSTIN Barko 275 - Excellent value Diesel. 7500 Hours. One owner.

Email: Austin@lumbermensco.com with low at hours at 3,500. 5.9 Well maintained. Item ID 13294.

Phone: 888-401-6367 EXT 703 CUMMINS continuous grapple.

Sam x702 2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

Runs Great!. Item ID 13740. Sam

‘02 Jackson Shavings Mill x702 Item ID: 13736 BELL

Contact:1990 AUSTIN Bell Super T - This Bell has good condition. Just finished 10 Email: Austin@lumbermensco.com a brand new Duetz engine. Lever Acre clearing job, ready to work!

Phone: 888-401-6367 EXT 703 control, 33” bar, pump and tranny Remote control. Big production

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree

2010that Tigercat 724E Started

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

‘93 Barko 180B

it All!

Contact: AUSTIN Email: Austin@lumbermensco.com Since 1986, Lumbermens has Phone: 888-401-6367 EXT 703 published a monthly circular

Contact: AUSTIN Contact: AUSTIN 72NDEmail: ANNUAL GREAT LAKES Austin@lumbermensco.com Email: Austin@lumbermensco.com LOGGING & HEAVY EQUIPMENT Phone: 888-401-6367 EXTEXPO 703 Phone: 888-401-6367 EXT 703

Thurs, 7 Sept - Sat, 9 Sept

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Woods Publishing

MID-ATLANTIC

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

LOGGING & BIOMASS EXPO

& 4 in 1 bucket.

Selma, North Carolina www.midatlantic-logging-biomass­ Contact: AUSTIN Email: Austin@lumbermensco.com expo.com/ Phone: 888-401-6367 EXT 703 OR 931-797-8029

Sam Wall Item ID: 9737 (888) 401-6367 ext. 702John Deere 700J LGP (7K hrs) 6mo. ago a new head gasket, water alternator and sam@lumbermens.cobatteries have been put on. Undercarriage ispump, at 60-65%. 30" wide

Cambridge, Ohio www.ohioforest.org

** INFO LINK**

pads. Log arch and winch work great. Winch was barely used. A/C heat works well. Very good machine, no leaks, dry and ready to clear!

New front idlers, too. Only selling because too many payments for 703the use it's been made of.

Austin Woods (888) 401-6367 ext. austin@lumbermens.co

MAILING ADDRESS

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate700J machine JOHN DEERE Item ID: 2212 in ve1y good condition, Cuts 130 ('08) (4.5K hrs) One owner only, bought brand

one or two pins on the rail that needs fixing. $2.5-$4K, therefore the cheap price. All maintenance has Sbeen &W 125 Mill with done on Band time. Reason for selling is owner needs to lower his overall monthly payments.

Item x703 QuotesID we13876. receivedAustin range between

Caterpillar generator - Low hours

Contact: JOE on the mill, electronic computer Set Email: Joe@lumbermensco.com

works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 709

801-362-2170

Cat 3406 140KW Genset, 12,400 ready648G to run. Series Item ID 13434.

JOHNhours DEERE III Item ID: 746 Sam x702

CARRIAGES & DRIVES

Dual arch, tires tread 30%, 30.5 This was a repo from in Alabama.

A/C not working properly. Owner bought it from them and used it for about 18mo. Nothing wrong with it. Grapple needs new packing Cardinal HD Carriage ($600 fix). Good2010 skidder, reliable!

Contact: JOE Carriages (Sawmill) - Cardinal Email: Joe@lumbermensco.com Carriage EXT line709 it includes carriage Phone: 888-401-6367 OR 801-362-2170

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

with onboard log turners, carriage

Baker ......................................

5, 7 Item ID: 9450

drive, hyd pac2s for carriage, Kubota SVL-95 Item ID: 4861 Menominee Saw .....................This 29is in LIKE-NEW sawyers cab, computer controls, conditions. Only 420hrs. It’s currently on a small

Brute Force Mfg. ..................... 31

A/C - heat works.electronic It has the load sensing for closed with drives Metal Detector's Inc. ..............controls, 30 radio,cabinet center hydraulics with parallel loader control valve. Very tight machine. In addition to the diamond forestry mulching head, carriage knees, husk includingowner Midwest Sharpening.............. 26

Corley Mfg .............................. 32

Multitek ...................................Phone: 12 888-401-6367 EXT 709 OR 801-362-2170

TIMBERJACK 230A

Contact: AUSTIN Buck Equipment (AIM) ........ 36 Send address changes to: Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029 Lumberman's Exchange

P.O. Box 1916 Columbia, TN 38402

702-875-2703

feet a minute also has new in '08, undercarriage 60%.CLT Has anpresses. issue with

B & B Mfg. ............................... 18

May be sent to­ 1989 Model with Bell's Machining 27 factory 5.9 Cummins ..................... engine, power shift morris@lumbermens.co transmission, Hercules winch. Working daily.

POSTMASTER

bells and whistles, its a production that go up and down, with airbags,

Contact: AUSTIN THE PAUL BUNYAN SHOW Email: Austin@lumbermensco.com Phone: 888-401-6367 703 OR8931-797-8029 Fri, 6 OctEXT - Sun, Oct

EQUIPMENT REPS

Email: Mark@lumbermensco.com

with 44 inch wheels, and Phone: 888-401-6367 EXTall 708the

CRD Metalworks .................... 25 Item ID: 5627 The Lumberman's Exchange is (11K hrs) Ledgering CW Mill-ArmorHog ..............

17 system doesn’t work, trail wheel needs to be

Timbco 425

published monthly by Woods fixed. It does has new wiring and a new sensor. The undercarriage is at 40 with a 5.9 engine.

A/C - heat works! There's a computer glitch CW Mill-Hogzilla ...................

15 Publishing, P.O. Box 1916, (waiting to be fixed) where to tip the head back, you have to hit another function and then the head will move back.

The computer Columbia, TN 38402. All rightssystem has been checked and re-calibrated by Woodland Equipment Dyna Products ........................ 35 reserved. All editorial/ advertorial in (MI) 18mo. ago. It has a Risley processing head. submissions are used at the Contact: JOE Empire Hydraulics ................... 8 discretion of the publisher and Email: may Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170 be edited for purposes of clarity Great Lakes Mfg. .................... 34 and space. Although all efforts have Hahn Machinery ...................... 3 been made to ensure accuracy of Bell Ultra C content submitted by advertisers Hurst Boiler ............................. 14 Item ID: 1025 and writers, the Lumberman's Exchange, its principles and 1996 model with Joystick control and Koehring Iron Bull ................................... 21 associates, are not held liable for Head. errors or omissions. Reproduction, Kilgore Saw ............................. 22 Contact: AUSTIN in whole or part, is prohibited with­ Email: Austin@lumbermensco.com Lignomat ................................. 24 out written consent.

Phone: 888-401-6367 EXT 703 OR 931-797-8029 ©2017 Woods Publishing

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

job. Owner doesn’t need it any longer. It has high flow joystick

is including a blue diamond grapple and a bucket.

48" bottom saw and 36" top saw Contact: JOE Morbark .....................................

9 Email: Joe@lumbermensco.com

Piper's Saw Shop.................... 13 Rotochopper............................ 40 Row Electric ............................ 20 Sawmill Exchange .................. 11

STACKING RAC

Select Sawmill ......................... 19 Smith Sawmill ........................... 4 The Paul Bunyan Show ......... 39 Thomas Industrial Controls..... 10

16’ CAT 545D

Union Grove Saw Knife.. 2, 37 Item ID:& 14211 Universal Contact: Refiner AUSTIN................... 23 Email: Austin@lumbermensco.com WoodMizer ................................ l Phone: 888-401-6367 EXT 703

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

Timbco 445D Item ID: 1326

2001 model and is a 2 owner machine with 10000 frame hours, UC is at 40%, cab has heat & ac. New pumps, overall machine is mechanically sound.

Contact: AUSTIN Email: Austin@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 703 800.S48.6914 I S73.663.7711

931-797-8029 ❘ L!  (888) 401-MENS 401-MENS

NO. 31

L O G G I N G

Contact: AUSTIN DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 703

931-797-8029

Contact: feed deck MARK 20 foot out feed deck

Item ID: 6056& BIOMASS MID-ATLANTIC LOGGING Fri, 15 Sept - Sat,comes 16 Sept 2007 model with 5400 hours, with log forks,

Lexington, Kentucky Item ID: 7060 http://www.kfia.org/ 2007 model with 5634 original hours comes with KentuckyWoodExpo.aspx two year old 16’ bucksaw.

Item ID: 410

John Williams 95’ long frame with JD winch.ext.

Skidder is in excel(888)model 401-6367 701 lent condition. j@lumbermens.co

BANDMILLS & HEADSAWS

machine, with air strain conveyers

KENTUCKY WOOD EXPO Fri, 15PRENTICE Sept - Sat,2210 16 Sept

Timberjack 380C MARKETING DIRECTOR

Grapple Skidder Currently 6303 original hours!

Meter is working, comes with 28L tires at 85%(NOT TIRES IN PICS) 2 1/2 years ago the motor was overhauled by John Deere great winch, tight pins, dry Danckaert Band Resaw - Roughly machine no leaks, woods ready/working machine! maintenance done 250-300 hours paper work docu10 hours on this machine since it menting work from John Deere. Part time loggers selling only because recently got new equipment. has been rebuilt, it has a 24foot in

Escanaba, Michigan

CAT 928G

PUBLISHER

ADVERTISING SALES

07’ Tigercat 620C Hot Springs, Arkansas Item ID: 14248 www.arkloggers.com

Item ID: 14077

Item ID: 14247

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and JohnofDeere 648D at Location Itemall ID:equipment 14255 www.LumberMB\ISmagazine.com

D5H TSK

Phone 315.284.4126 Item ID: 1865 Fax 315.849.2045 215,000 pound Cat 235bz knuckle boom with 50 foot Website reach. Needs about $7K in repairs. www.empirehyd.com Email Contact: TED info@empirehyd.com Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

CAT 235 BZ

“Precision Under Pressure”

2005 Cat 525B Grapple Skidder

L O G G I N G

Item ID: 7571

9500 approx hours, hear air, radio, enclosed cab, all cylinders been repacked, transmission is in good shape, no issues, 30.5 tires approx 70%, good woods ready machine! Call for more pictures!

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

LOW Hours, Excellent Condition, Very Hard To Find Dozer.

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘93 Barko 180B

John Deere Grapple Skidder ‘16 Halverson H140 Item748G3 ID: 14077 Item ID: 95874 Contact: Austin Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

2004 John Deere 748G3 Grapple 401-6367 Skidder approx 10000 frame hours, Ph: (888) x703 200 on rebuilt motor, good transmission, strong machine, 30.5 tires, direct drive, strong winch, everything works good, only thing it could use is 1 pin/bushing on arch main boom. Call for more pictures!

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

‘95 John Deere C6 Tree Farmer Tigercat 604 Item ID: 7436

‘06 CAT 517

13428 Victory Ln. // PO Box Item ID: 13869 Adams Center, NY 13606 Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Good rubber and less than 4000 hours, in excellent 124 condition!

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

Item ID: 5461

Trim Saw - 12000 10 HP motor on cutoff blade, 5 HP motor on feed chain. Like new, less than 200 hrs

‘05 Gehl CTL 70 Contact: TED

Email: Teds@lumbermensco.com Item ID: Phone: 888-401-6367 EXTJW-986495 701 or (801) 319-9351

‘83 John Deere 4850

Contact: J Williams Ph: (888) 401-6367 x701

Brewer 9112 Gangsaw & 4004 Item ID: 18554 Notcher 3 phase Brewer Golden Eagle gangsaw double arbor, single rubber tire auto feed for cants, like new blades and sleeves spaces, washers are all likeon new. chain conveyer, 8 way splitter, Notcher infeed & outfeed with swing arm to push material to notcher, like new notcher, sawdust conveyer as well neck as sawdust ventilation, electrical 20,000lb goose trailer.

Item ID panel, ready to go unit! Call for more pictures!

Item ID: 14073 Contact: Austin 13916. Austin x703 Ph: (888) 401-6367 x703Contact: MARK

Email: Mark@lumbermensco.com Best Value Portable Log Phone: 888-401-6367 EXT 708 or 702-875-2703

‘13 KMC 2500 Track Skidder Meadows #1 Complete

Item ID: 14078 Sawmill Contact: Austin Item ID: 14069 Ph: (888) 401-6367 x703

Splitter

Sam x702

grapple, 5,000 original hours.

Firewood Processor - This is a Chomper Model 16 PDA

automatice firewood processor

manuals and receipts. Purchased Contact: TED new forTeds@lumbermensco.com $32,500.

Item ID 13865.

Email: Phone: 888-401-6367 EXT 701 Sam x702 or (801) 319-9351

LOGGING EQUIPMENT BANDIT

but electronic option is available.

50% or better. 475 hp Cummins

day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

‘05 Woodmizer LT300 FIREWOOD PROCESSORS Item ID: 14031

2010 Shop Built Wood Processor Contact: AUSTIN - Email: It has aAustin@lumbermensco.com 353 Detroit diesel, 40 Phone: 888-401-6367 EXT 703 inch tooth circle saw, 30 foot insert931-797-8029  Issue 364 382

Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

'16 LT40 Super Hydraulic

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a Item ID: 9903

homemade processor with a 10’ One Owner! 136 hours, Tons of log deck.

Has Priced a hydraulic grapple, Extra Parts. cheap! chain and kicker that all runs off Contact: SAM ofEmail: a 4 cylinder Mercedes power Sam@lumbermensco.com unit.

Has 888-401-6367 a 4’ chain saw that Phone: EXT kicks 702

Lumbermens™  since 1986

❘

1995 Barko 775 B Feller Buncher

kohing head. works great.

Cummins 275hp powerhead unit, sawdust conveyer with electric

model H360 35 HP motor Hydraulic Log Dog One owner comesProCut withsaw all blade Hydraulic Back and Stop Sterling 13Ft 11in 7/8 TS/ 1 1/4 PV 121 Peavy Hook

1999 Bandit 1900 Tracked Disc

vans and produce 6 - 8 loads per

13238. Chris x700

amp gauges. up to 16”.

Hud-Son PortableCuts Sawmilllogs year 2016 1000 hours

Item ID: 8841temp and tach, oil pressure, water

Handles logs up to 32”. Uses

13HP Honda motor. Manual start

(excellent condition.). Item ID

- Pumps recently redone. 400 hrs

quality chips with patented ‘Cone’ drum design. Can easily load 42’

motor, Rotobec continuous

Hud-Son low hours.

Control panel includes 360 Portable Sawmill

with John Deere power unit with

- Small manufacturer in PA has

made the best valued log splitter.

Danchaert Band Resaw

ID:13421.

13876Sam x702 capacity!. Item Item ID

BARKO Contact: AUSTIN Email: Austin@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 703 knuckleboom, 30' boom, 75hp

with 1700 hours, in very good

condition. Easily produces high

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 off onto a conveyor. This is a very

well built processor. Item ID 13820.

Cutoff Trim Saw

S A W M I L L

Item ID: 7098

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

Talon 900 Edger

2004 Bandit Beast Model Item ID: 69924680 -

3412 Caterpillar Diesel engine 2016 Timberking talon 900 3 blade edger, only 6 hours, $16,995.00 new, Gas engine 24.5 hp Koehler. Fully por-

with 850 5300 Mill in table, like newHP. Call for more hrs. pictures.

good condition.

Just finished 10 Contact: MARK Email: Mark@lumbermensco.com Acre clearing job, ready to work!

Phone: 888-401-6367 EXT 708 Remote control.

Big production

702-875-2703

 List  seLL  exchange  buy  save

Meadows 2 Deluxe Sawmill

on injection pump. always started Item ID: 80412

good. inonboard goodcomputer, working order.

22in deluxe new hydraulic cab control, 3 saw

miner edger, dual chain for sawdust from edger, 6 cylinder motor, 24’ live log deck, comes with good 48” and 52” blades,

saw wrench, jockey grinder for teeth, chain log turnItem ID electric 13185.

Sam x702 er, mill is on wheels and is portable, 14,000 board foot sawed

in 9 hours with this160D mill!

1999 Barko - new engine with

Contact: MARK 1500 hours. Hour approximately Email: Mark@lumbermensco.com

Phone:dont 888-401-6367 EXT last 708 2 owners meter work. The

702-875-2703

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Desjardin Shingle Mill

Runs Great!. Item ID 13740. Sam Item ID: 1970 x702

Good shape. Bought it 30 yrs ago from another owner. It did not get much use. Only used it to make shingles for his home.

BELL

1990 Bell Super T - This Bell has Contact: TED

aEmail: brandTeds@lumbermensco.com new Duetz engine. Lever Phone: 888-401-6367 EXT 701

control, 33” and tranny

or bar, (801)pump 319-9351 ❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

Precision Scragg Item ID: 3607

Precision Scragg, excellent condition, Themotor, Tree 40 hp twin saw 4,6,8,and 10 inches, canthat send Started video of it running, Va Area

it All!

Contact: TED Email: Teds@lumbermensco.com Since 1986, Lumbermens Phone: 888-401-6367 EXT 701has published or (801) 319-9351 a monthly circular

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

SOUTHWEST FOREST PRODUCTS EXPO '02 WoodMizer LT-40 Fri, 25 AugustItem - Sat,ID:2611345 August Hot Springs, Arkansas Kubota Diesel engine. www.arkloggers.com

Sanborn Scragg Mill Item ID: 14050

Contact: AUSTIN Contact: AUSTIN 72NDEmail: ANNUAL GREAT LAKES Austin@lumbermensco.com Email: Austin@lumbermensco.com LOGGING & HEAVY EQUIPMENT Phone: 888-401-6367 EXTEXPO 703 Phone: 888-401-6367 EXT 703

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

Edmiston Complete Sawmill Package MID-ATLANTIC LOGGING & BIOMASS Item ID: 14084

Woods Publishing

Contact: AUSTIN MID-ATLANTIC ADVERTISING SALES Email: Austin@lumbermensco.com LOGGING & BIOMASS EXPO Phone: 888-401-6367 EXT 703

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Fri, 15 Sept - Sat, 16 Sept

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

Item ID: 14118

John Williams (888) 401-6367 ext. 701Has the Kubota Diesel Motor! j@lumbermens.co

Contact: AUSTIN

DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger

Phone: 888-401-6367 EXT 703

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 7021998 Timber sam@lumbermens.co Bandmill

Lexington, Kentucky LT70 ‘06 Woodmizer http://www.kfia.org/ Electric KentuckyWoodExpo.aspx Item ID: 14076

AUSTIN THE Contact: PAUL BUNYAN SHOW Email: Austin@lumbermensco.com Fri,Phone: 6 Oct888-401-6367 - Sun, 8 OctEXT 703

Harvester 30HT25

Cambridge, Ohio www.ohioforest.org

Item ID: 32925

** INFO LINK**

Timber harvester 25ht30 can cut 30” diameter 21’ long logs, 35hp gas motor, mill is totally hydraulic, new battery, 16 New blades, comes 703with owners manual and maintenance records. Call for more pictures!

Austin Woods (888) 401-6367 ext. austin@lumbermens.co

MAILING ADDRESS

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

B & B Mfg. ............................... 18 P.O. Box 1916 Columbia, TN 38402-1916 H. Payne .............................. 16 (888) 401-6367 PrecisionB.Scragg Item ID: 3607

Baker ...................................... 5, 7 AD SUBMISSIONS Excellent condition, 40 hp twin saw motor. The saw motors are 40HP 1780 RPM currently wired for 480v.—-spinning May be sent to­ Lincoln Bell's .....................

36 inch F pattern circle Machining saws. The hydraulic power pack is27 a

10Hp motor also 480V. Scragg will handle 12 foot and up to 14 morris@lumbermens.co

POSTMASTER

inches in diameter easy. Scragg in great shape. has been run Brute Mfg. ..................... 31 very little. Can send videoForce on request.

Send address changes to: Contact: TEDBuck Equipment (AIM) ........ 36 Email: Teds@lumbermensco.com Lumberman's Exchange Phone: 888-401-6367 EXT 701 or (801) 319-9351 32 Corley Mfg ..............................

P.O. Box 1916 Columbia, TN 38402 CRD Metalworks .................... 25

Frick #1 Jumbo Mill

The Lumberman's Exchange is ID: 200 CW Item Mill-ArmorHog .............. 17 published monthly by Woods Complete operation that includes ................... a meadows CW Mill-Hogzilla 15 Publishing, P.O. Box 1916, edger, HMC V206 Debarker, 48” Chipper, blower, live decks, and many other spare parts.

Columbia, TN 38402. All rights Dyna Products ........................ 35 reserved. All editorial/ advertorial Contact: AUSTIN submissions are used at the Empire Hydraulics ................... 8 Email: Austin@lumbermensco.com discretion of the publisher and Phone: may 888-401-6367 EXT 703 OR 931-797-8029 be edited for purposes of clarity Great Lakes Mfg. .................... 34 and space. Although all efforts have Hahn ...................... been made to ensure accuracy of Quality 4 Machinery Head Trim Saw 3 content submitted by advertisers Item ID: 1559 Hurst Boiler ............................. 14 and writers, the Lumberman's Exchange, its principles and Ready to run, operates from either end, Va Area Iron Bull ................................... 21 associates, are not held liable for errors or omissions. Reproduction, Contact: TED Kilgore Saw ............................. 22 Email: Teds@lumbermensco.com in whole or part, is prohibited with­ Phone: 888-401-6367 EXT 701 Lignomat .................................

24 out written consent.

or (801) 319-9351 ©2017 Woods Publishing

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

M&F Gauge ............................. 28 Meadows Mill, Inc. ................ 33 Menominee Saw ..................... 29

Corley Complete Sawmill Metal Detector's Inc. ..............

30 Item ID: 14035 Midwest Sharpening.............. 26 Contact: AUSTIN Mor bark ..................................... 9 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Multitek ................................... 12 Piper's Saw Shop.................... 13 Rotochopper............................ 40 Row Electric ............................ 20 Sawmill Exchange .................. 11

'11-'12 Helle Sawmill Item ID: BANDMILLS & 14119 HEADSAWS

Danckaert Bandhydraulic Resaw -head Roughly 56” auto carriage control cab, vertical saw edger log turner, 10 hours on2 this machine since5itlog stop and load deck, 60’ long track. has been rebuilt, it has a 24foot in Contact: MARK feed deck 20 foot out feed deck Email: Mark@lumbermensco.com with 44 inch wheels, andEXT all the Phone: 888-401-6367 708 bells and 702-875-2703 whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703

‘14 Hurdle 3-HD

S & W 125 Band Sawmill Mill with Block Item ID: 13997 Caterpillar generator - Low hours on the mill,AUSTIN electronic computer Set Contact: Email: Austin@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls,

‘13 Woodmizer 4000drives Sawmill cabinet with electronic for Item ID: 14000 carriage knees, husk including Contact: 48" bottomAUSTIN saw and 36" top saw Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

STACKING RAC

Select Sawmill ......................... 19 Smith Sawmill ........................... 4 The Paul Bunyan Show ......... 39 Thomas Industrial Controls..... 10

LT40 Union Wood-Mizer Grove Saw & Knife .. 2, 37 Item ID: 13995 Universal Refiner ................... 23 Contact: AUSTIN Email: Austin@lumbermensco.com WoodMizer ................................ l Phone: 888-401-6367 EXT 703

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

Hurdle #2 Sawmill Item ID: 8720

2016 Complete sawmill package, includes precision chip pack, 80ft vibrating conveyer, HMC Debarker, Morgan Slab edger, 3 strand log deck, and more.

Contact: AUSTIN Email: Austin@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 703 800.S48.6914 I S73.663.7711

931-797-8029 ❘ L!  (888) 401-MENS 401-MENS

NO. 33

S A W M I L L

MARKETING DIRECTOR'02 Woodmizer LT-40 Super HD

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

Woodmizer LT300

“Precision Under Pressure”

Phone 315.284.4126 Item ID: 14278 Fax 315.849.2045 Call for info!

Website www.empirehyd.com Contact: MARK Email:Email Mark@lumbermensco.com info@empirehyd.com Phone: 888-401-6367 EXT 708

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘93 Barko 180B

Item ID: 14191

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

S A W M I L L

Item ID: 13956

702-875-2703

Woodmizer Twin Blade Diesel Edger

‘16 Halverson H140HudSonItem ID: Portable 14077 Sawmill H360 Contact: Austin Item ID: 8841 Skidsteer (DEMO)

Ph: (888) 401-6367 x703 2016, 1000 Hours, 35HP Motor, Hydraulic Log Dog, Item ID: JW-909632 Hydraulic Back Stop, ProCut Saw Blade 13FT 11in Contact: J Williams 7/8, TS 1 1/4 PV 121 Peavy Hook, KY area Ph: (888) 401-6367 x701Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

03’ Woodmizer LT-300 Operation Item ID: 14171

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘06 Brewco B1600 Resaw

13428 Victory Ln. // PO Box 124 Item ID: 13862 Adams Center, NY 13606 Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

1996 Jackson Shavings Mill Item ID: 1271

Model 30D6

‘05 Gehl CTL 70

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXTJW-986495 703 OR 931-797-8029 Item ID:

Contact: J Williams Ph: (888) 401-6367 x701

‘83 John Deere 4850

MISCELLANEOUS

‘08 Timberking B20

2005 Peerless 45’ Walking Floor Trailer Item ID: 83112

chain conveyer, 8 way splitter, on Item ID: 14073 slats on the very end are knicked up a bit, breaks good, tires decent, overall good condition, 96” wide.Item Call ID for 20,000lb goose neck trailer.

Contact: Austin more pictures!

13916. Austin x703 Ph: (888) 401-6367 x703Contact: MARK peerless 45’ walking floor, refurbished, dot tagged, couple

with 1700 hours, in very good

Email: Mark@lumbermensco.com Best Value Log Splitter Phone: 888-401-6367 EXTPortable 708 or 702-875-2703

condition. Easily produces high

quality chips with patented ‘Cone’

- Small manufacturer in PA has

made the best valued log splitter.

Risley Rolly 2 head Item ID:up765 Handles logs to 32”. Uses

5yrs ago, taken off a TimbcoManual 425D (‘13). start Unused drum design. Can easily load(‘13) 42’ Bought new 13HP Honda motor. for about 1 year. It has an updated woodland computer, all cables and hook-ups come with it. Excellent conditions. Nothing needed vans and produce 6 - 8 loads per but electronic option is available. and ready to work!

day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge Contact: JOE

EDGERS & GANGS

Email: Joe@lumbermensco.com adjustableEXT to709 single two way. Great Phone: 888-401-6367 OR 801-362-2170

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

MACK CH613

homemade processor Item ID: 46668 with a 10’ (‘02) (330K miles) Engine is a MACK E7-427 w/an Eaton PROCESSORS log deck.

Has a hydraulic grapple,

Fuller 10 speed manual transmission. Steel dump box. All invoices be provided for work doneoff on it.

2010 Shop Built Wood Processor chaincan and kicker that all runs

- It has a 353 Detroit diesel, 40Contact: JOE of a 4 cylinder Mercedes power

inch insert tooth circle saw, 30Email: foot Joe@lumbermensco.com unit. Has EXT a 4’709 chain saw that kicks Phone: 888-401-6367 OR 801-362-2170  Issue 364 382

Lumbermens™  since 1986

❘

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Meadows #2 Deluxe Contact: Austin Item ID: 14250 Ph: (888) 401-6367 x703

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Cornell Double End Trim Saw Item ID: 6307

1995 model with automatic setworks, variable speed feed & hydraulic conveyer. capacity!.

Item ID 13421. Sam x702

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: off onto a888-401-6367 conveyor. ThisEXT is a703 very

BARKO Contact: AUSTIN Email: Austin@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 703

931-797-8029 knuckleboom, 30' boom, 75hp

motor, Rotobec continuous Aluminum Water Tank

well built processor. Item ID 13820.

grapple, original hours.

Item5,000 ID: 59292 Firewood Processor - This is with baffles, (excellent valves and aircondition.). actuator/pump.Item Hight ID : 6.5 feet Sam x702

a Chomper Model 16 PDA

- Width at widest point: 7.5 feet - Length: 16 feet . This was a working unit when Chris tank wasx700 removed from truck. Crane 13238. available to load on your trailer no additional cost.

automatice firewood processor

1995 Barko 775 B Feller Buncher

Contact: TED

Email: Teds@lumbermensco.com - Pumps recently redone. 400 hrs with John Deere power unit with Phone: 888-401-6367 EXT 701 or (801) 319-9351

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

on injection pump. always started

good. in6good order. 22in Inline CATworking 200 KW Item ID: head 44131 kohing head. works great.

Item ID 13185.

Sam x702 One owner and comes with all Unit has 200 original hours.

1999 Barko 160D - new engine with manuals and receipts. Purchased Contact: TED Email: Teds@lumbermensco.com approximately new for $32,500. Item ID 13865.

Phone: 888-401-6367 EXT1500 701 hours. Hour

Sam x702

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

642 Morbark Debarker Sam x702 Item ID: 20033 2004 Bandit Beast Model 4680 -

one owner great condition, completely rebuilt 6 months, like new sawdust conveyor 30’ infeed, 3412 Caterpillar Diesel new drive motors, rebuilt pumps,engine new electric motor, new belts, new bearings. Selling because just bought850 brand new5300 Cleerman with HP. hrs. debarker.

Mill in Call for video!

good condition. Just finished 10 Contact: MARK Acre clearing job, ready to work!

Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 Remote control. Big production

702-875-2703

 List  seLL  exchange  buy  save

ormeter (801) 319-9351 dont work. The last 2 owners

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

Freightliner 1990 with low at hours at 3,500.

5.9 Item ID: 1990 CUMMINS continuous grapple.

MILES-322,470 motor with Runs Great!. CUMMINS Item ID 13740.

SamJake brake 9 speed Eaton fuller Air ride over

spring suspension 11.22.5 fair tires 15’ 10” x702 of frame from cab back Had A.C. but doesn’t work. Originally had a water tank on it.

BELL

1990 Bell Super T - This Bell has Contact: TED aEmail: brandTeds@lumbermensco.com new Duetz engine. Lever Phone: 888-401-6367 EXT 701 control, 33” pump and tranny

orbar, (801) 319-9351 ❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

2007 Morbark Chipper

Desjardin Shingle Machine Item ID: 1970

The Tree PTO driven, Blade 37 1/2, runs that Started great Massachusetts Area it All! Contact: TED Email: Teds@lumbermensco.com Since 1986, Lumbermens Phone: 888-401-6367 EXT 701has published or (801) 319-9351 a monthly circular

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

Item ID: 9658 Precision Chipper SOUTHWEST FOREST PRODUCTS EXPO Item ID: 4524

Fri, 25 August - Sat, 26 August model 22.

Everything works like it should... to go to work!

Hot Springs,Ready Arkansas www.arkloggers.com

66 inch ReBuilt Precision Chipper good shape

Contact: WALKER Email: Walker@lumbermensco.com Contact: TED 72ND ANNUAL GREAT LAKES Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 707 Phone: 888-401-6367 EXT 701 LOGGING & HEAVY EQUIPMENT EXPO or 931-797-3915

or (801) 319-9351

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

'08 Dynamic Chipper Item ID: 14196

MID-ATLANTIC LOGGING & BIOMASS 2008 conehead dynamic chipper model 585 1762 hours great Fri, 15 Sept - Sat, 16 Sept condition 500 hp john deere comes with $2k worth of new knives

MID-ATLANTIC MARK ADVERTISING SALES Contact: LOGGING & BIOMASS EXPO Email: Mark@lumbermensco.com

Morris Woods Phone: 888-401-6367 EXT 708 or 702-875-2703 (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR '99 Peterbilt Road Tractor

KENTUCKY WOOD EXPO Cut -Off Saw Fri, 15 Sept Sat,Trim 16 Sept

ID: 5461 Lexington,Item Kentucky http://www.kfia.org/ 10 HP motor on cut off blade, 5 HP KentuckyWoodExpo.aspx motor on feed chain, Good Condition.

John Williams Item ID: 14188 (888) 401-6367 ext. 701 j@lumbermens.co Contact: AUSTIN

DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger

Phone: 888-401-6367 EXT 703

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 Morbark Chipper (888) 401-6367

Item ID: 80356

AD SUBMISSIONS

Contact: TED

THE Email: PAULTeds@lumbermensco.com BUNYAN SHOW Phone: 888-401-6367 EXT 701 Fri, 6 Oct or - Sun, 8 Oct (801) 319-9351

** INFO LINK** B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16 Item ID: 28802 Baker ...................................... 5, 7

Meadows Mill, Inc. ................ 33

855 Cummings 350 KW

Morbark 58” LIKE NEW

Menominee SawID: .....................

29 Item 6114

Totally rebuilt 58 inch real May by be pro. sent to­ clean nice piece.

855 Cummings 350kw gen set enclosed with belly tank. 300 original hours since new.

Bell's Machining ..................... 27 Other generators available.

Metal . ..............

30 2 vibratingDetector's conveyer, it is aInc 2017 model with only

Contact: TED POSTMASTER Email: Teds@lumbermensco.com Send address changes to: Phone: 888-401-6367 EXT 701 Lumberman's Exchange

or (801) 319-9351

Brute Force Mfg. ..................... 31 Contact: TED Email: Buck Teds@lumbermensco.com Equipment (AIM) ........ 36 Phone: 888-401-6367 EXT 701 Corley Mfg or (801) 319-9351 ..............................

32

Midwest Sharpening.............. 26 Contact: AUSTIN Mor bark ..................................... 9 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Multitek ...................................

12

931-797-8029

morris@lumbermens.co

P.O. Box 1916 Columbia, TN 38402

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have CAT 3412 - 600KW Prime been made to ensure accuracy of Item ID:by 85729 content submitted advertisers and writers, the Lumberman's Has 233 original hours & 1 hour running time on Exchange, its principles andWill do load new sleeves, pistons, & bearings. associates, are not held liable for test before loading. errors or omissions. Reproduction, Contact: in whole TED or part, is prohibited with­ Email: Teds@lumbermensco.com out written consent. EXT 701 Phone: 888-401-6367

or©2017 (801) 319-9351 Woods Publishing

This chipper comes equipped with chip pack and 20’ hours on it! In like new condition!

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

CAT D349 Gen 2 Great Lakes Mfg. .................... 34

Item ID: 227 Hahn Machinery ...................... 3

Marathon Generator 208-220-230-240V, 480V transfer box, includes control panel, Hurstsafeties, Boiler .............................

14 engine governor, dual electric starter, 750KW/60HZ, 887KVA, load tested/ serviced, 940 ................................... original hours, 1100hp diesel.

Iron Bull 21 Several other generators also available

Kilgore Saw ............................. 22

Contact: TED Email: Teds@lumbermensco.com Lignomat .................................

24 Phone: 888-401-6367 EXT 701

or (801) 319-9351

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Smith Sawmill ........................... 4 The Paul Bunyan Show Blockbuster 1412.........

Plus39 Item ID: 958 Thomas Industrial Controls..... 10

2015 model with PLUS package and only 50 hours on it.

Comes with 8 way and 6 was& splitting head.

Machine Union Grove Saw Knife .. 2, 37 is in like new condition.

Universal Contact:Refiner AUSTIN................... 23 Email: Austin@lumbermensco.com WoodMizer ................................

Phone: 888-401-6367 EXT 703l

931-797-8029

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly Multitek 2025 Processor Item ID: 4501 since it 10 hours on this machine

2002 been model located in Ohioit has a 24foot in has rebuilt,

feed deck 20 foot out feed deck Contact: AUSTIN Email: Austin@lumbermensco.com with 44 inch wheels, andEXT all the Phone: 888-401-6367 703

931-797-8029 bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine

in ve1y'93 good condition, Cuts 130 KW 425 CAT Item ID:13342 feet a minute also has CLT presses.

Item 13876.

Austin x703Inframe withIDten speed 220 twenty four feet of frame beS & W 125 Band Mill with hind the cab Caterpillar generator - Low hours on the mill,WALKER electronic computer Set Contact: Email: Walker@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 707 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage,

2016 Barko Tree Chipper

sawyers cab, computer controls, Item ID: 16688

cabinet with electronic drives for

150 hours. 550 Cimmins engine. Can handle

trees up toknees, 22 incheshusk in diameter. carriage including

48" bottomTED saw and 36" top saw Contact: Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701

or (801) 319-9351

STACKING RAC Kenworth T800 Item ID: 6755

(44K miles) It's got a HOOD 7000 extended boom on it, still with manufacture warranty. The boom has been on it for a year. Being used everyday. 2 years only of life.

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 www.BakerProducts.net 800.S48.6914 801-362-2170 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 35

M I S C E L L A N E O U S

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

new drum with about 6o hours inch thick heavy duty skin

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

1990 Freightliner Item ID: 7422

'10 Woodsman 440 Whole Tree Chipper Item ID: 14105

3,000 original hours.

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘16 Halverson H140 Skidsteer (DEMO)

Cummins motor w/Jake Brake, 9 speed Eaton Fuller, Air Ride over spring suspension, 11.22.5 fair tires, 15'10" of frame from cab back, has A/C but not Item ID: JW-909632 working, 322,470 miles

Western Star Heavy Haul Item ID: 14093

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Contact: J Williams Contact: TED Ph: (888) 401-6367 x701 Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701

or (801) 319-9351

‘93 Barko 180B

Item ID: 14077 Contact: Austin AM General M818 Army Truck Ph: (888) 401-6367 x703 Item ID: 14576

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

‘04 Takeuchi TLN140

M I S C E L L A N E O U S

Item ID: JW-880805

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘13 KMC 2500 Track Skidder

Shop Built Firewood Processor 13428 Victory Ln. // PO Box 124

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

Item ID: 13994NY 13606 Adams Center,

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

off onto a conveyor. This is a very

Kenworth T800 Log Truck & Loader

well built processor. Item ID 13820.

‘06 Cord King Model 60

Sam x702 Item ID: 6006 Firewood Processor - This 1994 model with 1998 Grizzly 215c loader.is15000 Miles

‘05 Gehl CTL 70 Contact: AUSTIN

automatice firewood processor Contact: AUSTIN

Item ID: 14068

‘83 John Deere Shop Built Wood 4850 Processor

Item ID: 14073 Item ID: 14038 Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 with 1700 hours, in very good condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item"Like ID 13644.

Sam x702 New" Tajfun

Firewood Processor FIREWOOD PROCESSORS

Item ID: 14249 2010 Shop Built Wood Processor AUSTIN -Contact: It has a 353 Detroit diesel, 40 Email: Austin@lumbermensco.com inch insert tooth circle saw, 30 foot Phone: 888-401-6367 EXT 703  Issue 364 382

Email: ID: Austin@lumbermensco.com Item JW-986495 Phone: 888-401-6367 Contact: J Williams EXT 703 Ph: (888) 401-6367 x701

on fresh engine overhaul. 600,000 frame miles. Work

aready Chomper Model 16 PDA setup!

Email: Austin@lumbermensco.com

with John Deere power unit with Phone: 888-401-6367 EXT 703

931-797-8029

low hours. Control panel includes

tach, oilLumber pressure, water temp and 02’ Jackson Harvester Item ID:Cuts 1187 amp gauges. logs up to 16”.

chain conveyer, 8 way splitter,Model on 20,000lb goose neck trailer.

13916. Austin x703

Best Value Portable Log

One owner and comes 30D10, entire operation includes with knife all grinder, 30ft leg dust collector, two cilos, open top trailers, dust Item ID manuals and receipts.

Purchased collector, blower unit, and Bagger. One owner machine new for $32,500. Item ID 13865.

Contact: AUSTIN Email: Austin@lumbermensco.com Splitter Sam x702 Phone: 888-401-6367 EXT 703 OR 931-797-8029

- Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

LOGGING EQUIPMENT BANDIT 1999 Bandit 1900 Disc ‘83 InternationalTracked S-Series

Item ID: Under 14080Carriage at 13HP Honda motor. Manual start Chipper - Cat Contact:50% AUSTIN but electronic option is available. or better. 475 hp Cummins Email: Austin@lumbermensco.com Diesel.

7500 Hours.

One owner.

Has Log Lift. Uses 4-way wedge Phone: 888-401-6367 EXT 703 adjustable to single two way. Great Well maintained. Item ID 13294.

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Sam x702

2004 Bandit Beast Model 4680 -

3412 Caterpillar Diesel engine homemade processor with a 10’‘06 Western Star Michigan Special ID:5300 14011 with Item 850 HP. hrs. Mill in log deck. Has a hydraulic grapple, chain and kicker that all runs off condition. Just finished 10 Contact:good AUSTIN Email: Austin@lumbermensco.com Acre clearing job, ready to work! of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 Remote control. Big production unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

 List  seLL  exchange  buy  save

‘95 John Deere C6 Tree Farmer Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

‘15 Cord King M44

ID:13421.

13961Sam x702 capacity!.Item Item ID

BARKO Contact: AUSTIN Email: Austin@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 703 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

Morbark 40/36

good. in good working order. 22in Item ID: 647 kohing head. head works great.

It has a CAT engine (755hp) with a sloped live

floor and top feedwheel.

Brand new clutch Item IDlarge 13185.

Sam x702 installed. Ready to work!!!

1999 Barko 160D - new engine with Contact: JOE approximately 1500 hours. Hour Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 meter dont work. The last 2 owners

801-362-2170 have only used it to load trucks or as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL 3 Strand Log Deck

Item ID: 14095 1990 Bell Super T - This Bell has

AUSTIN aContact: brand new Duetz engine. Lever Email: Austin@lumbermensco.com control, 33” bar, pump and tranny Phone: 888-401-6367 EXT 703 ❘

 LumbermensCO.com

** CALENDAR** GMC LOG TRUCK Item ID: 5037

1995 model with new 6 liter engine with 60000 miles on it, good tires, has split 5 gear transmission.

NY STATE WOODSMEN'S FIELD DAYS Contact: Fri, 18AUSTIN August - Sun, 20 August Email: Austin@lumbermensco.com Boonville, New York Phone: 888-401-6367 EXT 703 OR 931-797-8029

www.starwebhosting.net/woodsmen/

'99 International 4700 Chip Truck

SOUTHWEST FOREST Chipper PRODUCTS EXPO Morbark Fri, 25 August Sat, 26 August Item ID: 26696

Item ID:Tree 14116 The

Hot Springs, Arkansas 6 knife - 58" chipper with 3 pocket blanks in it. 2nd owner.... 1st owner could not make payments so Morbark bought it back. www.arkloggers.com

that Started Only 71,697 Miles. it All!

Was like new 5 years ago when 2nd owner purchased it.

Contact: AUSTIN Email: Austin@lumbermensco.com Since 1986, Lumbermens has Phone: 888-401-6367 EXT 703 published a monthly circular

72ND Contact: TEDANNUAL GREAT LAKES Email: Teds@lumbermensco.com LOGGING & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 701 or (801) 319-9351 Thurs, 7 Sept - Sat, 9 Sept

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

Item ID: 4268& BIOMASS MID-ATLANTIC LOGGING Fri, 15 Sept - Sat,in16good Sept Log trailer with 4 bolsters conditions.

Woods Publishing Morris WoodsTRAILER 25' LOG PUP 4 BUNKS

MID-ATLANTIC

LOGGING & BIOMASS EXPO

(888) 401-6367 ext. 704 Item ID: 8062 morris@lumbermens.co

(888) 401-6367 ext. 701

Contact: AUSTIN THE PAUL BUNYAN SHOW Email: Austin@lumbermensco.com Phone: 888-401-6367 703 OR8931-797-8029 Fri, 6 OctEXT - Sun, Oct

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 '91 Fuel Harvester Columbia, TN 38402-1916 Tub Grinder (888) 401-6367

Item ID: 14112

AD SUBMISSIONS

3406 CatMay engine and to­ 4424 total be sent machine hours. morris@lumbermens.co

POSTMASTER Contact: AUSTIN Send address changes to: Email: Austin@lumbermensco.com Lumberman's Exchange Phone: 888-401-6367 EXT 703 P.O. Box 1916 Columbia, TN 38402

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have Truck been359 madePeterbilt to ensure accuracy of Item ID: content submitted by7841 advertisers andmodel writers, the Lumberman's 1987 with 600,000 Miles. Has 400 Cummins engine, air ride suspension, 40 rears, and and all new drive Exchange, its principles tires.

Can be soldare with not or without log trailer associates, helda Pitts liable for errors or omissions. Reproduction, Contact: AUSTIN in whole or part, is prohibited with­ Email: Austin@lumbermensco.com out written consent.

Phone: 888-401-6367 EXT 703

931-797-8029 ©2017 Woods Publishing

** INFO LINK**

10 hours this machine since it Sun 4 on Bolster Log Trailer

Item ID: 8256 has been rebuilt, it has a 24foot in

feed deck 20 foot out feed deck Contact: AUSTIN Email: Austin@lumbermensco.com with 44 inch wheels, andEXT all the Phone: 888-401-6367 703

931-797-8029 bells and whistles, its a production that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts International 4300130

Item ID: 761 Lexington, Kentucky 2006 modelhttp://www.kfia.org/ with Mack 410Hp engine, Eaton fuller 10 speed transmission, 44k reads on camelback suspension, KentuckyWoodExpo.aspx 744,000 frame Miles. Brand new tires! Road ready!

j@lumbermens.co Contact: JOE Email: Joe@lumbermensco.com DESIGN DIRECTOR Phone: 888-401-6367 EXT 709 Donna Heninger

801-362-2170 Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Ready toSelma, GO! North Carolina Contact: JOE www.midatlantic-logging-biomass­ Email: Joe@lumbermensco.com expo.com/ Phone: 888-401-6367 EXT 709 OR 801-362-2170

KENTUCKY WOOD EXPO Fri, 15MACK Sept -CHN613 Sat, 16 Sept

It has all new wiring, LED lights, air pin lock, turn table MARKETING DIRECTOR super tight with a 25' long bed.

Those 4 bunks are in new conditions. Rear brakes are almost ready to be reJohn Williams placed. Good trailer, work-ready!

Danckaert Band Resaw - Roughly

Bucket Truck feet a minute also CLT presses.

Item ID:has 29129

Item ID 13876.4300 Austin 2005 international dd466x703 less than

73000 miles, all new hoses, new bearings, $10k recently

Sinto & the W engine 125 Band with receipts Mill to prove all work, altech rebuilt the boom(23k Job) Call for more pictures!

Caterpillar generator - Low hours Contact: MARK on the mill, electronic computer Set Email: Mark@lumbermensco.com Phone:1/2" 888-401-6367 works,1 or 2" band,EXT 22ft.708 track

702-875-2703 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

94’ Mack with Prentice 120 Sam x702 Item ID: 14215

CARRIAGES & DRIVES

B. H. Payne .............................. 16

Contact:2010 AUSTIN Cardinal HD Carriage Email: Austin@lumbermensco.com (Sawmill) - Cardinal Phone: Carriages 888-401-6367 EXT 703 Carriage line it includes carriage M&F Gauge ............................. 28 with onboard log turners, carriage Meadows Mill, Inc. ................ 33 drive, hyd pac for carriage,

Baker ...................................... 5, 7

Menominee Saw ..................... 29

Kenworth Road Tractor Truck Bell's Machining .....................

27

sawyers cab, computer controls,

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Midwest Sharpening.............. 26

carriage knees, husk including

B & B Mfg. ............................... 18

Item ID: 14092 Brute Force Mfg. ..................... 31 Contact: AUSTIN Buck Austin@lumbermensco.com Equipment (AIM) ........ 36 Email: Phone: 888-401-6367 EXT 703 Corley Mfg .............................. 32

Morbark ..................................... 9

CRD Metalworks .................... 25

Multitek ...................................

12 2009 Mack Truck & Trailers Item ID: 74618 Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper ............................ either a Rosa log rack or storm debris box. 40 Serco

CW Mill-Hogzilla ................... 15

light bar; length bed............................ to takes 244" and to back20 285" Row Electric Will separate truck and trailer. 300,000 miles, 10,000

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Email: Teds@lumbermensco.com Select .........................

19 Phone:Sawmill 888-401-6367 EXT 701

Great Lakes MfgLog . ....................

Kenworth Truck 34

Smith Sawmill ........................... 4

18 speed. All new tires and brakes. Versitle with 7500 Loader. Rear tires 11R 22.5 (95%). Log rack; hours. This is ready to go.

Contact: TED

or (801) 319-9351

Item ID: 4849 Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

1990 model Boiler with 300,000 original miles. Has 444 CumHurst .............................

14 mins engine, 15 speed transmission, 46 rears. Recently had new head, pistons, rings, and New steer tires inIron Bull ................................... 21 stalled. Can be sold with or without a Pitts log trailer.

Thomas Industrial Controls..... 10

Kilgore Saw ............................. 22 Contact: AUSTIN Email: Austin@lumbermensco.com Lignomat .................................

Phone: 888-401-6367 EXT 70324

931-797-8029

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

48" bottom saw and 36" top saw

2011 Dynamic Horizontal Grinder

STACKING RAC

1000 hrs, 425 hp Volvo Engine, Transfuild Clutch, Remote Control, Rev Fan, 25ft Stacking conveyor, Fix hammer Va. area Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701

or (801) 319-9351

Mack Log Truck

Item ID: 14087 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Universal Refiner ...................Email: 23 Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net WoodMizer ................................ l 800.S48.6914 I S73.663.7711

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 37

M I S C E L L A N E O U S

ADVERTISING SALES

BANDMILLS & HEADSAWS

machine, with air strain conveyers

4 BUNK TRAILER

PUBLISHER

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

“Precision Under Pressure”

A D D I R EC TO RY

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

,-soo-211-94&8 ‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 382

tach, oil pressure, water temp and PLEASE PRINT

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

amp gauges. Cuts logs up to 16”.

good. in good working order. 22in

FEBRUARY 2019

kohing head. head works great.

If you need to Change your Address or

Item ID 13185. Sam x702then OneAdd owner Your and comes with all to our Name mailing list, 1999 Barko 160D new engine manuals and receipts.

Purchased please complete this form and mail to: with new for $32,500. Item ID 13865.

approximately 1500 hours. Hour

- Small manufacturer in PA has

Lumbermens™ Magazine dont work. The last 2 owners Sam x702 P.O. Boxmeter 1916 have only used it to load trucks or LOGGING EQUIPMENT Columbia, TN 38402

Handles logs up to 32”. Uses

❑ Bandit Please ❑ Disc Please Change Please Remove delimber,❑ grapple has been rebuilt.

1999 1900Add Tracked

Best Value Portable Log Splitter made the best valued log splitter.

13HP Honda motor. Manual start

• Through-beam range u1p to 230 feet vans and produce 6 - 8 loads per but electronic option is available.

• Waterproof -Has IP67 rated day. Item ID 13882. Austin x703 Log Lift. Uses 4-way wedge Not affected adjustable by vibration EDGERS &• GANGS to single two way. Great • 60k LUX Immunity toPA.sunlight Brewco Saws - Two Brewco Saws Value!

Item ID 12062. Sam x702 in excellent condition. Runs great.

Anson...............................................7.............................800-663-7723 B & B Mfg.......................................27...........................800-654-5320 B. H. Payne.....................................13..........................404-761-8711 Baker................................................6, 10......................800-548-6914 Bell's Machining............................25..........................888-995-1965 ‘93 Barko 180B Blockbuster Inc..............................10..........................888-775-4883 ‘16 Halverson H140 Item ID: 14077 Buck Equipment (AIM).................13...........................800-803-3365 Contact: Austin Skidsteer (DEMO) Corley Mfg......................................14...........................

423-698-0284 Ph: (888) 401-6367 x703 Item ID: JW-909632 CRD Metalworks...........................9.............................888-667-8580 Contact: J Williams CW Ph: Mill, (888)DynaHog. 401-6367.......................39..........................800-743-3491 x701 Dyna Products...............................2.............................888-820-3962 F&R Manufacturing......................23...........................800-355-1250 Great Lakes Mfg............................14...........................877-248-5677 Hurst Boiler....................................17...........................877-774-8778 JM Wood Auction Co., Inc..........4.............................800-447-7085 Kilgore Saw.....................................12...........................888-857-5153 ‘95 John Deere C6 Klug Korners..................................13...........................800-471-5060 Tree Farmer Lignomat.........................................12..........................800-227-2105 Item ID: 13920 L-M Equipment Co. Ltd................1.............................800-455-8807 Contact: Austin ‘13 KMC 2500 Track Menominee Saw............................13...........................

800-582-0470 Ph: (888) 401-6367 x703 Skidder Metal Detectors Inc......................29..........................541-345-7454 Item ID: Sharpening 14078 Midwest ...................15...........................231-924-5953 Contact: Austin Multitek...........................................14...........................

00-243-5438 capacity!. Item ID 813421.

Sam x702 Ph: (888) 401-6367 x703 Pantron Automation, Inc. ...........38...........................

8 00-211-9468 BARKO Piper’s Saw Shop...........................8.............................800-845-6075 1994 Barko 160B - Electric Profile knuckleboom, 30' boom, 75hp off onto Techno;ogy........................19..........................800-369-4242 a conveyor. This is a very Prolenc .......15..........................877-563-8899 motor, Rotobec continuous well builtManufacturing, processor. Item IDInc..

13820.

Rowx702 Electric....................................15...........................

800-248-4479 grapple, 5,000 original hours.

Sam Select Sawmill Co.. . .......................12..........................866-724-7600 (excellent condition.). Item ID Firewood Processor - This is 13238. Chris x700 601-635-5543 aTraxPlus Chomper..........................................11...........................

Model 16 PDA Trelan...............................................40..........................989-561-2280 1995 Barko 775 B Feller Buncher automatice firewood processor Universal Refiners.........................3.............................800-277-8068 - Pumps recently redone. 400 hrs with John Deere power unit with Woodlandia....................................21..........................877-508-8777 on injection pump. always started low hours. Control panel includes

Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

BANDIT

as a backup as needed. Has a CTR

*Company name and address process have your change.

Boomto cylinders minor leaks.

Chipper - Cat Under Carriage at required Company Name*:_ Item ID 13694. Sam x702 50% or better.

475________________________________________________________ hp Cummins

94 Barko 275 - Excellent value Diesel.

7500 Hours. One owner.

Individual Name:__________________________________________________________ with low at hours at 3,500. 5.9 Well maintained.

Item ID 13294.

Address:_ ________________________________________________________________ Sam x702

CUMMINS continuous grapple.

_______________________________________________________________________

2004 Bandit Beast Model 4680 -

Runs Great!. Item ID 13740. Sam

City:____________________________________________________________________

3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

x702

BELL

State:___________________________________________________________________

Zip:__condition. ___________________________________________________________________ 1990 Bell Super T - This Bell has good Just finished 10

Phone:__________________________________________________________________ a brand new Duetz engine. Lever Acre clearing job, ready to work!

control, 33” bar, pump and tranny Remote control. Big production Email:___________________________________________________________________

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

HOGZILLA ** INFO LINK** ®

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 39

LUMBERMENS™ MAGAZINE Post Office Box 1916 Columbia, Tennessee 38402

PRSRT STD. U.S. Postage PAID Permit No. 212 Pulaski, TN

®

®

498 Eight Mile Road | Remus, MI 49340 Phone: 989-561-2280 | WWW.TRELAN.COM

Over 40 Years!

BUY FACTORY DIRECT: PARTS & CHIPPERS Chippers With Tier-3 Engines Available

Factory Direct Inventory Blowout Sale at Remarkably Low Prices!

Model 23-LRC

Model 786-WRC

BLOWOUT PRICE: $355,000

BLOWOUT PRICE: $480,000

Model 640-RC

BLOWOUT PRICE: $295,000

Model 686-WRC

BLOWOUT PRICE: $435,000

Model 646-WRC

BLOWOUT PRICE: $335,000

Some Models are New and Unused while others are Demonstrators with very low hours and are in like-new condition. No trades. Freight not included.

LL BUY A LAN TRE YOUR ACTORY F PARTS AND SAVE T DIREC $$$$$ $

TRELAN CHIPPERS ARE KNOWN FOR THE HIGHEST PRODUCTION RATES IN THE INDUSTRY!

If you are interested in a Trelan Whole Tree Chipper or Trelan Parts, contact us at: 989-561-2280 or Toll Free (877) 487-3526