Lumbermens Feb'18

UNIVERSAL REFINER C

O

R

P

O

The H.A.W.G. is unbelievably simple, durable and fast, yet it will grind almost anything and make a finished product in just one pass... even pulp chips. Is ideal for grinding: Asphalt, Shingles, Construction Waste, Green Waste, Stumps, Difficult/Dirty Material, Tropical Waste (Palm & Palmetto), etc.

R

A

T

I

O

N

The R-MAG is a portable wood waste grinder that can be used in many areas of recycling.

They can easily and safely grind lawn clippings, leaves, land clearing, construction/demolition waste logging slash, stumps, log yard waste, railroad ties, storm waste, tropical (palm and palmetto) waste etc.

800-277-8068 UNIVERSAL REFINER The BEST Industrial Grinders/Shredders on the Planet for over 35 years.

P. O . B O X 1 5 1 • M O N T E S A N O , WA 9 8 5 6 3

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 3

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘93 Barko 180B

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

capacity!. Item ID 13421. Sam x702

BARKO

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot 372  Issue 364

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens  since 1986

❘

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

1999 Barko 160D - new engine with

manuals and receipts. Purchased

approximately 1500 hours. Hour

new for $32,500. Item ID 13865.

meter dont work. The last 2 owners

Sam x702

LOGGING EQUIPMENT BANDIT

50% or better. 475 hp Cummins

Has Log Lift. Uses 4-way wedge

grapple, 5,000 original hours.

Item ID 13185. Sam x702

One owner and comes with all

but electronic option is available.

13HP Honda motor. Manual start

motor, Rotobec continuous

1995 Barko 775 B Feller Buncher

automatice firewood processor

1999 Bandit 1900 Tracked Disc

knuckleboom, 30' boom, 75hp

13238. Chris x700

a Chomper Model 16 PDA

Handles logs up to 32”. Uses

1994 Barko 160B - Electric

(excellent condition.). Item ID

Firewood Processor - This is

‘05 Gehl CTL 70

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Chipper - Cat Under Carriage at

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

Diesel. 7500 Hours. One owner.

with low at hours at 3,500. 5.9

Well maintained. Item ID 13294.

CUMMINS continuous grapple.

Sam x702

Runs Great!. Item ID 13740. Sam

2004 Bandit Beast Model 4680 -

x702

3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 Lumbermensmagazine.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 5

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘93 Barko 180B

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: 14077

Austin FREE EQUIPMENT LISTINGS, CALL (888) Contact: 401-MENS Ph: (888) 401-6367 x703

BANDMILLS & HEADSAWS

DANCKAERT BAND RESAW Roughly 10 hours on this machine since it has been rebuilt, it has a 24 foot in feed

deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in very good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 CARRIAGES & DRIVES

2010 CARDINAL HD

13428 Victory Ln. // PO Box 124 CARRIAGE CARRIAGES Adams Center, NY 13606 Cardinal Carriage line it includes

carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for carriage

Item ID: JW-909632 SHAVINGS EQUIPMENT FOR SALE Contact: J Williams Two shavings machines Ph: (888) 401-6367 x701 manufactured by Jackson Lumber 10 cutter heads, 30 wide and hold 8 knives, One custom built shavings machine by Farley Machine works 8 x 42 cutter heads 42 x 48 deep x 86 long log box 40hp three phase motor , a log transfer system, conveyors, Mooreland, Oklahoma.

Ira Smith 580-334- 6001

knees, husk including 48” bottom saw and 36” top saw, short pop-up transfer to edger, belted rollcase to clear slabs and cuts from sawline, log stop ‘13loader KMCto2500 Track and drop logs onto carriage, heavy duty log turner Skidder under log stop and loader to Item ID: big 14078 deal with logs onto carriage Contact: Austin and track and frame.

Ph: (888) x703 Item ID 401-6367 13198. Sam x702

Single chute loading system.

Item ID 12764. Sam x702

and includes the sawmill, and Item ID: 13920 cab.

An incline Contact: Austinconveyers, a transfer table and two sets of Ph: (888) 401-6367 x703 roller tables. This mill saws a million board feet or more of walnut every year. Max log capacity!. Item ID 13421. Sam x702 diameter 36in, Max Width of BARKO cut 25in, The width of the band 1994 - Electric is 1Barko 1/2 160B Inches.

Video of it operating is available, and can knuckleboom, 30' boom, 75hp be sent upon request. motor, Rotobec continuous Item ID 13892. Austin x703

Firewood Processor - This is

(excellent condition.). Item ID

CHIPPERS

PRECISION 58 This CHIP off onto a conveyor. is PAC a very

well built processor. Item ID 13820.

Sam x702

45th Annual Spring a Chomper ModelAuction 16 PDA March 13th 16th ‘05 Gehl CTL 70 automatice firewood processor MONTGOMERY, AL unit with Item ID: JW-986495 with John Deere power

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

2015 TIGERCAT 720G

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2015Built TIGERCAT 620E 2010 Shop Wood Processor

Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

2015 CAT 535D

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple,

CAT chain and2016 kicker that525D all runs off

inch insert tooth circle saw, 30 foot unit. Has a 4’ chain saw that kicks BRYANT WOOD, AUCTIONEER AL LIC.1137 372  Issue 364

Lumbermens  since 1986

❘

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

1999 Barko 160D - new engine with

manuals and receipts. Purchased

approximately 1500 hours. Hour

new for $32,500. Item ID 13865.

meter dont work. The last 2 owners

Sam x702

LOGGING EQUIPMENT BANDIT

have only used it to load trucks or

as a backup as needed. Has a CTR

2014 JOHN DEERE 648H

2016 JOHN DEERE 450J LGP

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Chipper - Cat Under Carriage at

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

Diesel. 7500 Hours. One owner.

with low at hours at 3,500. 5.9

Well maintained. Item ID 13294.

CUMMINS continuous grapple.

Sam x702

Runs Great!. Item ID 13740. Sam

2004 Bandit Beast Model 4680 -

x702

3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

BELL

(4) 2018 KENWORTH W900L 1990 Bell Super T - This Bell has

2014 CATERPILLAR 525C good condition.

Just finished 10

334-264-3265

of a 4 cylinder Mercedes power

- Pumps recently redone. 400 hrs

Item ID 13185. Sam x702

One owner and comes with all

50% or better. 475 hp Cummins

800-447-7085

- It has a 353 Detroit diesel, 40

amp gauges. Cuts logs up to 16”.

but electronic option is available.

Has Log Lift. Uses 4-way wedge

1995 Barko 775 B Feller Buncher

tach, oil pressure, water temp and

1999 Bandit 1900 Tracked Disc

grapple, 5,000 original hours.

13238. Chris x700

low hours. Control panel includes

Handles logs up to 32”. Uses

13HP Honda motor. Manual start

COMPLETE SAWMILLS

‘95 John Deere C6 2006 WOODMIZER LT300 This mill Farmer is currently running, Tree

a brand new Duetz engine. Lever www.JMWood.com

Acre clearing job, ready to work!

Remote control. Big production control, 33” bar, pump and tranny J.D. GRAY, AUCTIONEER AL LIC.1791

 List  seLL  exchange  buy  save

❘

 Lumbermensmagazine.com

40

used

ra

02

00

02

r

y

wer

w

ill

DRY KILNS

MEC 12 X 38 TRIPLE PASS DRUM DRYER Comes with trunnions, drum drive, fan and cyclone.

Item ID 13925. Austin x703 MEC 12 X 42 TRIPLE PASS DRUM DRYER 12 x 42 Mec triple pass Drum The Tree Dryer, comes with trunnions.

Started Item IDthat 13924.

Austin x703 DYNAMIC it CHIPPERS All!

2004 JCB 441 WHEEL

Since 1986,LOADER Lumbermens has published a monthly circular 3,509 hours on this machine, reaching sawmills, loggers, everything works as it and should. pallet makers, recyclers I industrial have many videos available woodworking plants ofworldwide. it running, and can be sent

** CALENDAR**

2008 DYNAMIC 585 CHIPPER FIREWOOD PROCESSOR NYcone STATEThis WOODSMEN'S FIELD DAYS This is a 2008 dynamic is a homemade processor Fri, 18 with August - Sun, August head chipper with 1700 hours, a 10’ log20deck.

Has a York chain and in very good condition. Easily Boonville, hydraulic New grapple, www.starwebhosting.net/woodsmen/ produces high quality chips with kicker that all runs off of a 4 patented ‘Cone’ drum design. cylinder Mercedes power unit.

SOUTHWEST FOREST PRODUCTS EXPO Can easily load 42’ vans and Has a 4’ chain saw that kicks off August - Sat, 26This August produce 6 - 8 loads per day. Fri, 25 onto a conveyor. is a very Hot Springs, Arkansas Item ID 13882. Austin x703 well built processor. www.arkloggers.com FIREWOOD PROCESSORS Item ID 13820. Sam x702 2010 SHOP BUILT 72ND ANNUAL GREAT LAKES PROCESSOR WOOD PROCESSOR LOGGING & FIREWOOD HEAVY EQUIPMENT EXPO This is a Chomper It has a 353 Detroit diesel, 40 Thurs, 7 Sept - Sat, Model 9 Sept16 PDA automaticeMichigan firewood processor inch insert tooth circle saw, Escanaba, with John Deere power unit 30 foot chain conveyer, 8 way with low hours. panel splitter, on 20,000lb MID-ATLANTIC goose LOGGING Control & BIOMASS

Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

PIPER’S Saw Shop ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

neck trailer.

Item ID 13916. Austin x703

upon request.

Item ID 13888. Austin x703

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

5 7 0 6 • 5 4 8 • 800

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

** INFO LINK**

Austin Woods Pricing Offer Promotional

(888) 401-6367 ext. 703 Simonds Red Streak austin@lumbermens.co

Hard Back 1-1/4” x .042 x 3/4” or 7/8” MAILING ADDRESS L im it e d18 Length 13’2” B & B Mfg. ...............................

P.O. Box 1916

T im O n ly 5, 7 Baker ......................................

e 16 B. H. Payne ..............................

Columbia, TN 38402-1916 (888) 401-6367

$14.71 $14.27 each AD SUBMISSIONS

us you MayTell be sent to­ saw morris@lumbermens.co

M&F Gauge ............................. 28 Meadows Mill, Inc. ................ 33 Menominee Saw ..................... 29

includes tach, oil pressure, water FOR CLASSIFIEDS temp and amp gauges. Cuts logs up to 16”.

One owner and comes Call 888.401.MENS with all manuals and receipts.

See pictures, and Purchased new forprices, $32,500.

Location all equipment Item IDof 13865.

Sam x702 at LOGGING EQUIPMENT www.LumberMB\ISmagazine.com BANDIT

BANDMILLS & HEADSAWS 2004 BANDIT BEAST

DanckaertMODEL Band Resaw - Roughly 4680

3412 Caterpillar Diesel engine 10 hours on this machine since it with 850 HP. 5300 hrs.

Mill has been rebuilt, it has a 24foot inin good condition. Just finished feed deck 20 foot out feed deck 10 Acre clearing job, ready with 44 inchRemote wheels, and all the Big to work! control. bells and whistles, its a production production capacity!

Item ID 13421.

Sam x702 machine, with air strain conveyers BARKO that go up and down, with airbags,

1994 BARKO 160B it includes two sets of Mcdonough

Electric knuckleboom, 30’ boom, 75hp motor, Rotobec is supported on both sides.

This continuous grapple, 5,000 origis anhours. extremely accuratecondition). machine inal (excellent Itemgood ID 13238.

Chris x700 in ve1y condition, Cuts 130

pressure guides. Top Casting wheel

BELL feet a minute also has CLT presses.

1990 BELL SUPER Item ID 13876.

Austin x703 T

This Bell has a brand new Duetz engine. Lever control, 33” bar, Caterpillar generator Low hours pump and tranny has- been rebuilt on mill, electronic computer Set notthe long ago.

Hour meter is inop.

New paint.

Runs Has track heat works,1 1/2" or 2"perfect. band, 22ft. and 3406 air, it140KW just needs to be fixed.

Cat Genset, 12,400 Item ID 13896. Sam x702

S & W 125 Band Mill with

hours ready to run. Item ID 13434.

Sam x702 1993 BELL SUPER T

& DRIVES 33” GoodCARRIAGES running condition.

Bar Saw. Tires 50%. Deutz 2010 Cardinal HD at Carriage engine.

Hour meter broken.

Carriages (Sawmill) - Cardinal Item ID 13543. Sam x702 Carriage line it includes carriage

with onboard log turners, carriage BELL TREE CUTTER

drive, hyd1000 pac for carriage, Around hours on the

machine.cab, New air cooled motor sawyers computer controls,

it here!

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

only about 300 hours. cabinet with electronic drivesRebuilt for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

POSTMASTER

arch SALE  SELL EQUIPMENT TODAY ❘ to0 it and 24/7go SUPPORT - USED SALE l§ TODAY SUPPORT with FORESTRY winch. LowEQUIPMENT hours on FOR Cat D5B❘ Dozer - Cat YOUR D5B s/n come hook up to your this skidder at only 3700. These

22X380, direct drive, EROPS,

job site and put it to work to up

dangling head. Several bars and chains. Machine came off the job in 48" bottom saw and 36" top saw February and is field ready.

Item ID 13943. Austin x703

STACKING RAC CASE

2006 CASE 440 SKID LOADER With only 871 hours, this machine starts, runs, and operates like new. I have many videos available and can be sent upon request.

Item ID 13886. Austin x703 99’ CASE 850G LONG TRACK DOZER One owner machine, only 3300 original hours, has never been used in the woods, it has a ripper on the back, original pads, and chains, Under carriage is new along with new rollers on www.BakerProducts.net the bottom, and new sprockets.

800.S48.6914 I S73.663.7711 Item ID 13909.

Austin x703 ❘ L!  (888) 401-MENS 401-MENS

NO. 7

1998 CATERPILLAR 515

CATERPILLAR

Phone Grapple with winch, no heat or air.

1994 CATERPILLAR 320 315.284.4126 Fax Open cab skidder with 9800 hours.

Dry machine that is in good 315.849.2045 Tires are 28L’s, rear 90% and fronts condition for the year. The stickWebsite www.empirehyd.com are 30% with new bear paws chains. and bucket cylinder have been Email Item ID 13801. Sam x702 “Precision Under Pressure” repacked. It has a thumbinfo@empirehyd.com and

bucket on it, also has a 230 Waratah processing head that can be sold with it. Hours are around 19k, motor has been replaced a couple years back.

Machine is working daily.

Item ID 13936. Austin x703

1994 CATERPILLAR D4 HI TRACK WITH GRAPPLE This is an extremely low hour dozer/skidder with only 2800 actual hours. Comes with new 30” pads and chain. Undercarriage is still in excellent shape. Fixed grapple and no winch.

Item ID 13932. Sam x702

2005 CATERPILLAR 525B This is a dual arch skidder with winch. Very low hour skidder with 7900 frame hours and only 63 hours on a new engine.

Continuous grapple, tires are 30.5’s @ 70%. This is a really nice skidder for the price.

Item ID 13816. Sam x702 2007 CATERPILLAR D6N LGP DOZER ENCLOSED CAB Overall: Cab Heat & AC, 150HP Cat C6.6L, 90% Undercarriage, GPS Ready, Sweeps & Rear Screen, 13’6” PAT Blade, 39,500 LBS, Hours: 7,867 Horsepower: 150 S/N: ALY03028.

Item ID 13567. Chris x700

1996 CAT 214 MOBILE EXCAVATOR with 36’ magnet 3 tons steel shear. low hrs! All hard tires, 2000 CAT 515 GRAPPLE SKIDDER 13428 Victory Ln. // PO Box 124 4 outriggers ideal for scrap One Owner Runs great! Is it an Adams Center, NY 13606 excellent condition. Rubber is business. It also has 48’ swavel bucket for street ditch clean up. around 75% Has new Hydraulic pump and Charge pump.

Item ID 13441. Sam x702 Item ID 13616. Sam x702

CLARK

CLARK RANGER 665D Tight and dry machine, rebuilt motor. hour meter broken, It has a 353 Detroit, with grapple, and winch, always fires right up, and runs with no issues.

Item ID 13748. Austin x703

‘16 Halverson H140 EARLY 70’S CLARK 664 Skidsteer (DEMO) CABLE SKIDDER

Item center ID: JW-909632 some slack, needs front Contact: J Williams tires, comes with a spare tire.

Ph: (888) 19 401-6367 x701 hold Gearmatic winch doesn’t good. 453 Detroit power unit.

Item ID 13629. Sam x702 JEM

EXPORT LOG DEBARKING LINE Reconditioned 35 Nicholson A-5 debarker, cab, infeed hour glass rolls, log dischage belt with side log kickers. Call 208-4510365 for details. $279,000 JOHN DEERE

‘13 KMC 2500 Track ‘92 JOHN DEERE 590 D CUTTER Skidder Will need pads in the future,

sprockets and rails are about Item ID: 14078 85%, it has a 4cyl JD motor. It Contact: Austin has a Rotnee dangle hd. w/ a bar Ph: (888) 401-6367 x703 saw and a spare idler.

Item ID 13612. Chris x700 off onto a conveyor. This is a very

well built processor. Item ID 13820.

When You Buy Your Circular Saws From B.H. Payne You’ve Bought the best... We Guarantee It!

Gehl CTL 70 Traditional‘05 Quality Combined With

Item ID: JW-986495 Todays Technology Contact: J Williams Ph: (888) 401-6367 x701

‘83 John Call 800 752-0627 Circular SawsDeere Make Sure To Ask For Our Free, Complete Saw Catalog Saw Bits and Shanks 4850 Circular Knives We Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth Quality Brand Reg. U.S. Pat Off

chain conveyer, 8 way splitter, on Carbide Saws Item ID:Tipped 14073 Cutoff Saws & Carbide Saws. We also Carbide Strobe ® Saws Saws, Inserted Tooth 20,000lb goose neck trailer. Item ID Contact: Austin B.H. Payne & Company Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels, 13916. Austin x703 Ph: Saw (888) 401-6367 x703 Manufacturers Knife Grinding Wheels, Saw Gumming Wheels & Knives.

Best Value Portable Log Splitter

Here’s What You Get With Every B.H. Payne Saw - Small manufacturer in PA has • Saws manufactured from only the Highest Quality Nickel Alloy Steel. condition. Easily produces high made the best valued log splitter.

• Each Saw Milled with State-Of-The-Art Precision CNC Milling Machine. quality chips with patented ‘Cone’ Handles logs up to 32”. Uses • We Tension Your Saw to Your RPM Speed BEFORE Leaving Our Factory. drum design.

Can easily load 42’Guaranteed.

13HP Honda motor. Manual start • Your Satisfaction - Completely with 1700 hours, in very good

vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

B.H. Payne & Company, Inc.

EDGERS P.O. Box 90608 & GANGS Brewco Saws - Two Brewco Saws East Point, GA 30364 in excellent condition. Runs great.

404 761-8711 Item ID404 13644.

Sam x702 Fax 761-5398 FIREWOOD PROCESSORS

2010 Shop 1890” Built Wood Processor “Since - It has a 353 Detroit diesel, 40

inch insertinfo@paynesaws.com tooth circle saw, 30 foot E-mail: 372  Issue 364

but electronic option is available.

Has Log Lift. Uses 4-way wedge

Sam x702

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and

‘11 Doosan DL200

amp gauges. Cuts logs up to 16”.

Item ID: JW-113876 One owner and comes with all Contact: J Williams manuals and receipts. Purchased Ph: (888) 401-6367 x701

chain and kicker that all runs off of a 4 cylinder Mercedes power

unit.

4’ chain saw that kicks Web Has Site:a www.paynesaws.com

Lumbermens  since 1986

❘

- Pumps recently redone. 400 hrs

14’ Snow Pusher

on injection pump. always started

good. good working order. 22in IteminID: JW-492406

Contact: Williams kohing head.J head works great.

approximately 1500 hours. Hour

meter dont work. The last 2 owners

LOGGING EQUIPMENT BANDIT

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

1999 Bandit 1900 Tracked Disc

Boom cylinders have minor leaks.

Chipper - Cat Under Carriage at

Item ID 13694. Sam x702

50% or better. 475 hp Cummins

‘04 Fabtek 344B

94 Barko 275 - Excellent value

Diesel. 7500 Hours. One owner.

Item ID: JW-093430

with low at hours at 3,500. 5.9 Contact: J Williams

Well maintained. Item ID 13294.

CUMMINS continuousx701 grapple.

Ph: (888) 401-6367

Runs Great!. Item ID 13740. Sam

x702 Processor - This is a Chomper

3412 Caterpillar Diesel engine

Item ID: JW-538174

BELL

super 14, with a 60hp engine. In 1990 Bell Super T - This Bell has very nice shape. Only 171 hours, a brand new Duetz engine. Lever comes with green chain conveyer. control, 33” bar, pump and tranny All of the manuals for the engine,

good Just finished Ph: condition.

(888) 401-6367 x70110

Acre clearing job, ready to work!

Remote control. Big production Waratah 624 Super - New

and auxiliary pump. New rebuilt

grapple, 5,000 original hours.

1999 Barko 160D - new engine with

Sam x702

Computer for  List  seLL  exchange head buy(Logrite).  save 10500 hours. New main pump

motor, Rotobec continuous

Ph:ID (888) 401-6367 Item 13185.

Sam x702x701

new for $32,500. Item ID 13865.

with 850 HP.J5300 hrs. Mill in Contact: Williams

knuckleboom, 30' boom, 75hp

1995 Barko 775 B Feller Buncher

automatice firewood processor

log deck. Has a hydraulic grapple,

homemade processor with a 10’

Ph: (888) 401-6367 x703 2006 JOHN DEERE 700J DOZER This work horse comes with a winch, and new undercarriage, capacity!. Item ID 13421. Sam x702 it is tight and dry & running daily BARKO with 4500 hours.

1994 Barko 160B - Electric Item ID 13883.

Austin x703

13238. Chris x700

a Chomper Model 16 PDA

Firewood Processor - This is a

Value! PA. Item ID 12062. Sam x702

2004 JOHN DEERE 648GIII This machine has 13000 total hours on the body, with only ‘95 John Deere C6 3000 hours on the new motor, comes with a set of chains, Tree Farmer working daily.

Item ID: 13920 Item ID 13878.

Contact: AustinAustin x703

(excellent condition.). Item ID

Firewood Processor - This is

‘05 Transport Trailers Custom Sam x702 2004 Bandit Beast Model 4680 Log Pup

adjustable to single two way. Great

1995 JOHN DEERE C6 TREE FARMER Only 20 hours on a new 5.9 Cummins engine. The whole center has been fixed, and line bolt redone, transmission is tight, center pins are good. It has a full speed tranny, with two ‘93 Barko 180B reverse, with a winch. Working Item ID: 14077 daily.

Contact: AustinAustin x703 Item ID 13920.

Ph: (888) 401-6367 x703 2004 648GIII JOHN DEERE DUEL ARCH SKIDDER Slick Machine. Runs good motor is in top notch condition.

Item ID 13610. Sam x702

❘

andLumbermensmagazine.com the chopper itself come with  it, as well as all of the electrical schematics. Item ID 13894. Austin

19 44

Ite Co Ph

2006 JOHN DEERE 748GIII 8700 hours, running daily.

Item ID 13881. Austin x703 2006 JOHN DEERE FIREWOOD PROCESSOR This is a Chomper super 14, with a 60hp engine. In very nice shape. Only 171 hours, comes with green chain conveyer. All of the manuals for the engine, The Tree and the that chopper itself come Started with it, as well as all of the it All! electrical schematics.

Item 1986, ID 13894.

Austin x703 Since Lumbermens has

** CALENDAR**

Bunching Saw Head has large pocket for accumulation 1995 FRANKLIN 170 and lifting side shield for Enclosed cab, single arch with a notching larger trees before winch, new paint, 4 brand NYnew STATEfelling.

WOODSMEN'S FIELD DAYS Cummins engine.

28L 23.126 firestone tires, around Fri, 18 tires August - Sun,Decent 20 August at 60%. running 15000 hours.

Boonville, condition. New York Item ID 13910. Austin www.starwebhosting.net/woodsmen/ x703 Item ID 13245. Sam x702 FRANKLIN

KOMATSU

FOR CLASSIFIEDS

2007 KOMATSU PC220LC Call 888.401.MENS w/2009 Log Max 7000XT processing head.prices, 9700 and hours See pictures, on carrier. 7200 hours on Log Location of all equipment at Max. Excavator style. Cab www.LumberMB\ISmagazine.com guard.

Flotation pads. One owner. Very good condition.

BANDMILLS & HEADSAWS Item ID 13464.

Sam x702

2003 FRANKLIN Q80 SOUTHWEST 2002 FOREST PRODUCTS EXPO HYDRO AX 621E GRAPPLE SKIDDER Fri, 25 August Danckaert Band Resaw - Roughly Sat, 26hours August Arouund 12,000 on this 7500 hours, but just 5000 Hot KOMATSU D61-EX 10 2008 hours on this machine since it Springs, Arkansas machine. Working daily. hours on reman engine. New www.arkloggers.com DOZER has been rebuilt, it has a 24foot in Item ID 13884. Austin x703 Radiator; New Hydraulic Pump; Great Condition. 4511 Hours. feed deck 20 foot out feed deck 72ND ANNUAL GREAT LAKES Comfort cab with good working Komatsu U/C at 95%. 35% 711EX SAW HEAD with wheels,Blade. and all the LOGGING & 1998 HEAVY EQUIPMENT EXPO heat and air; Tires at 80%.

Pads.44 inch 6 Way Fully FELLER BUNCHER published a monthly circular - Sat, 9 Sept Item ID 12450. Sam x702 Thurs, 7 Sept Enclosed comfort cab.

Great bells and whistles, its a production 2012 JOHN DEERE 548GIII 30.5-32 tires at 40%; Cummins price! reaching sawmills, loggers, Escanaba, Michigan GRINDMASTER machine, with air strain conveyers pallet makers, recyclers Single arch with winch,and blade Engine rebuilt 1500 hours ago; Item ID 13570. Sam x702 SUDDRETH HORIZONTAL industrial woodworking plants extensions, 1 new 28L and 3@ 8750 hours; Quadco 22” Large that go up and down, with airbags, MID-ATLANTIC LOGGING & BIOMASS GRINDER worldwide.

50%.

This is still a new machine tree saw head. Heat and A/C it2012 includes two sets of Mcdonough KOMATSU D61EX 15 15 Sept - Sat, 16 Sept This is a 60 HP low rpm HorizontalFri, work. with only 3600 hours.

New bearings in saw. pressure guides.

PUBLISHER Top Casting wheel DOZER North Carolina grinder, comes with a blower, Selma, Publishing Item Woods ID 13780.

Sam x702 Cutting trees today. www.midatlantic-logging-biomass­ with only 750 Triple is supported on bothHours. sides. This andMID-ATLANTIC the blower connects to the Item ID 13353. Sam x702 ADVERTISING SALES expo.com/ LOGGING & BIOMASS EXPO Rippers; Limb Sweeps; is an extremely accurate machine grinder with a pipe. It has top and KMC 2009 JOHN MorrisDEERE Woods 648H Enclosed cab with Heat/AC; bottom infeed rolls.

Overall lightly in ve1y good condition, Cuts 130 (888) 401-6367 ext.machine, 704 This is a one owner KENTUCKY WOOD EXPO KMC TRACK SKIDDER 6 way blade; Undercarriage at everymorris@lumbermens.co switch works, interior is used, in really good shape. WidthFri, 15 Sept - Sat, feet a minute also has CLT presses.

16 Sept 2500P 90%; Excellent Condition!

LUMBERMEN’S Equipment Digest very MARKETING clean, radio,DIRECTOR heat/ac. Air capacity is around 30” maybe Lexington, Item ID 13876.

Austin x703 Kentucky John Deere Dual Arch Grapple, Item PO ID Box13459.

1146 Sam x702 ride works as Williams it should. Tires even wider.

John http://www.kfia.org/ John Deere winch, Model S& 125 Band Mill with Columbia, TNW 38402-1146 Item ID 13889. Austin x703 (888) 401-6367 ext. 701clean are 30.5x32.

Extremely Equipment KentuckyWoodExpo.aspx 4000, Cummins Engine, Model Fax 2014 KOMATSU 450 1-800-477-7606 (931) 388-3564 Caterpillar generator - Low hours HYDRO-AX Digest machinej@lumbermens.co with no leaks. Cutting 6BTA, Clark Transmission Only 1100 hours on this www.lumbermenonline.com on the mill, electronic computer Set edge onDESIGN blade is excellent, with 1998 HYDRO AX 611EX SAWTHE28000.

DIRECTOR PAUL BUNYAN SHOW machine, in excellent condition.

HEAD FELLER BUNCHER Fri,Item Heninger no cracksDonna or welds anywhere. works,1 1/2" or 2" band, 22ft. track 6 Oct Sun, 8 Austin Oct x703 ID-13738.

Item ID 13937. Austin x703 with about 8800 hours.

Item ID 13747.

Austin x703 Cat 3406 140KW Genset, 12,400 Cambridge, Ohio EQUIPMENT REPS Sam Wall www.ohioforest.org hours ready to run. Item ID 13434.

LUMBERMEN’S

(888) 401-6367 ext. 702 sam@lumbermens.co

Sam x702

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

2010 Cardinal HD Carriage

PROTECT ALL ** Them INFO LINK** ® With Pro-Tec-To Wrap

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

Hydraulic Lines – Fuel Hoses – Air Lines Bell's Machining ..................... 27 Metal Detector's Inc. .............. 30 Electric Wire Bundles – Control Cables Brute Force Mfg. ..................... 31 Midwest Sharpening.............. 26

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Mfg&..............................

32® SLEEVE Multitek ................................... 12 PRO-TEC-TO®Corley WRAP PRO-TEC-TO Piper's Saw Shop.................... 13 CRD Metalworks ....................

25 COSTS! CUT YOUR DOWNTIME AND YOUR

The Lumberman's Exchange is Against CW ............................ 40 Mill-ArmorHog ..............

17 Rotochopper Protection Pinching, Crushing, Rubbing & Abrasion published monthly by Woods EVEN are Impervious to Oils CW Mill-Hogzilla ...................

15 and RowSolvents.

Electric ............................ 20 Publishing, P.O.–Box 1916, UV RAYS! Both Columbia, TN 38402. All rights Dyna Products ........................ 35 Sawmill Exchange .................. 11 reserved. All editorial/ advertorial Provides Maximum Protection for Logging, For The Distributor submissions are used at the Empire Hydraulics ................... 8 Select Sawmill ......................... 19 Construction & Stationary Applications Like: discretion of the publisher and may Nearest You, Call be edited for purposes of clarity Great Lakes Mfg. .................... 34 Smith Sawmill ........................... 4 • Debarker Buggies • Pantograph Arms • Forklift Masts and space.

Although all efforts have • Wheel Loaders • Skidder • Knuckleboom Hahn MachineryLoaders ...................... 3 The Paul BunyanorShow been made to ensure accuracy of Grapples Visit......... 39 Fellerbuncher Heads • Harvesting Heads • Stroke content •submitted by advertisers www.pro-tec-toproducts.com Hurst Boiler ............................. 14 Thomas Industrial Controls..... 10 and writers, the Lumberman's Delimbers • Dozer Blades Exchange, its principles and Iron Bull ...................................

21 Union Grove Saw & Knife.. 2, 37 ® Anywhere Hoses associates, are not held liable & forWires Are – Pro-Tec-To Products OEM’s, Repair Facilities & errors orOffers omissions.

Reproduction, Maximum Protection, Lower Reduced KilgoreCosts, Saw .............................

22 Distributor UniversalInquires Refiner ................... 23 Welcome in wholeDowntime or part, is prohibited with­ and Less Spills!

Lignomat ................................. 24 WoodMizer ................................ l out written consent. ©2017 Woods Publishing

CARRIAGES & DRIVES

Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including 48" bottom saw and 36" top saw

STACKING RAC

800-355-1250

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 9

LIEBHERR

great fuel economy. 11,230

Phone hours. Fixed cab riser. Two 2007 LIEBHERR A924C 315.284.4126 Fax section boom with 38’ reach.

LOG HANDLER RUBBER315.849.2045 Cab protection. 4-Wheel drive Website TIRED LOG LOADER www.empirehyd.com and steer. Push blade. Can pull 13,000 hours. 40’ Reach Email “Precision Under Pressure” with two section boom.info@empirehyd.com 60” loaded trailer. Cleaned, serviced

Log Grapple with continuous rotation. Fixed Cab Riser with cab guard protection. Front push blade. Tight and dry. Cleaned, Serviced, and Checked out for service. Can pull loaded trailer.

4-Wheel drive and steering.

Top Quality machine. Would be great for log yard or mill work.

Item ID 13476. Sam x702

and inspected. Tight and dry and ready for work. Located in Baltimore, MD. Item ID 13478. Sam x702 LINK-BELT

1997 LINKBELT 3400 HAS REBUILT PIERCE STROKE DELIMBER 36” Pads on 60% undercarriage.

5221 hours. Good running condition. Owner just spent $30,000 on upgrading delimber.

Item ID 12992. Sam x702

2011 LIEBHERR A904 RUBBER TIRED LOG HANDLER MORBARK Liebherr 4 cylinder engine with great fuel economy. 11,230 hours.

1987 MORBARK 27 WCL Fixed cab riser. Two section boom NEEDS MOTOR with 38’ reach. Cab protection. Morbark 1000 Knuckle boom 4-Wheel drive and steer. Can pull loader, 3 knife disc, Newer loaded trailer. Cleaned, serviced discharge chute, New banding and inspected. Tight and dry around disc, Brakes and tires are and ready for work. Located in also OK, Everything works well Baltimore, MD. Newer clutch -- with outboard 13428 Victory Ln. // PO Box 124 Item ID 13477.

Sam x702 Adams Center, NY 13606 bearing, Had Cummins KTTA 750 HP engine -- needs 2011 LIEBHERR A924 RUBBER repower.

TIRED LOG HANDLER Item ID 12443. Sam x702 Liebherr 4 cylinder engine with

1997 MORBARK MODEL 2400 CHIPPER Has a Cumins diesel engine and runs great. All fluids and filters have been changed.

Item ID 13429. Sam x702 1999 MORBARK 1400 TUB GRINDER ‘16 Halverson H140 Loader w/Cab; 4200 hours; Very good condition. (DEMO) Located in PA. Skidsteer ItemID: IDJW-909632 13361. Sam x702 Item

Contact: J Williams 6600 Ph:2006 (888)MORBARK 401-6367 x701 HORIZONTAL GRINDER Approx. 6000 hours on this well maintained machine.

Has New Cat Dealer Rebuild 1000HP Engine at 5000 hours.

42” X 66-5/8” Hammermill; variable speed infeed system; Hammermill drive includes all belts, sheaves, bushings & shields. Engine gauge panel & emergency down system ‘13 KMCshut 2500 Track located in an anti-theft console.

Skidderrpm sensor & auto Electronic feed 430 Gallon fuel Itemsystem.

ID: 14078 tank.

238 Gallon Contact: Austin hydraulic oil tank.

IQAN controlx703 system.

Ph: (888) 401-6367 Dust suppression system. Hyd operated debris containment door.

16a conveyor.

Function This radiois remote. off onto a very well built processor. Item ID 13820.

Sam x702

Super package! Optional new knife skin - $20,000 which is half price of new.

Item ID 12692. Sam x702 MORBARK 1200 TUB GRINDER Powered by a 3412 Cat engine, 600-hp. Tilt tub. Hours are ‘93 Barko 180B unknown. Please call Daren at Item ID:for 14077 Ext. 702 more details.

Contact: Item ID Austin 12919. Sam x702 Ph: (888)WOLVERINE 401-6367 x703 1995 MORBARK WOLVERINE 3-WHEELED FELLER BUNCHER S/N 4073. Only 1000 hours on new JD 4 cylinder engine.

Recently replaced turbo. 23.1 tires at 50%. 16” Rapid Buncher shear head. Machine is fast and in very good condition.

ItemJohn ID 12531.

Sam x702 ‘95 Deere C6 PRENTICE

Tree Farmer 1988 PRENTICE 210B

Itembattery ID: 13920 New and starter a Contact: Austin year ago, new alternator less Ph: (888) 401-6367 x703 than 2 years ago. Continuous rotation grapple, has 3-53 detroit engine, lever controls, plumbed for bucksaw. Mounted on a 1978 GMC capacity!.

Item ID 13421.

Sam x702 Brigadier withBARKO 6-71 detroit with a 10 speed. Runs everyday.

1994 Barko 160B - Electric Item ID 13703. Sam x702 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID Firewood Processor - This is P.O. Box 170 • Prentice WI 54556-0170 • 800-243-5438

13238. Chris x700 a Chomper Model 16 PDA www.multitekinc.com • sales@multitekinc.com ‘05 Gehl CTL 70 1995 Barko 775 B Feller Buncher automatice firewood processor

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

Multitek Firewood Processors

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

with John Deere power unit with

- Pumps recently redone. 400 hrs

tach, oil pressure, water temp and

good. in good working order. 22in

low hours. Control panel includes

on injection pump. always started

Increase Your Productivity and Profitability kohing head. head works great. amp gauges. Cuts logs up to 16”.

• Quality Equipment to Reduce Labor Costs Item ID 13185. Sam x702 chain conveyer, 8 way splitter, on One owner and comes your with all Circular Saw manuals or Bar and & Chain 20,000lb goose neck•trailer.

Item ID receipts.Models Purchased

1999 Barko 160D - new engine with

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

delimber, grapple has been rebuilt.

Made in the U.S.A. Boom cylinders have minor leaks.

Diesel. 7500 Hours. One owner.

94 Barko 275 - Excellent value

condition. Easily produces high

FromItem ID 13865. approximately 1500 hours. Hour new for $32,500.

13916. Austin x703 • 7 Models to Choose • Production Ratings up to 5.5 Full Cords Per Hour meter dont work. The last 2 owners Best Value Portable Log Splitter Sam x702 LOGGING EQUIPMENT have only used it to load trucks or - Small manufacturer in PA has BANDIT as a backup as needed. Has a CTR made the best valued log splitter.

drum design. Can easily load 42’

13HP Honda motor. Manual start

with 1700 hours, in very good

quality chips with patented ‘Cone’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot 372  Issue 364

Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens  since 1986

❘

Item ID 13694. Sam x702

with low at hours at 3,500. 5.9

Well maintained. Item ID 13294.

CUMMINS continuous grapple.

Sam x702

Runs Great!. Item ID 13740. Sam

2004 Bandit Beast Model 4680 -

x702

3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 Lumbermensmagazine.com

1992 PRENTICE 210D LOADER Excellent condition, very tight loader mounted on a 1989 Mack truck with very good tires.

Item ID 13654. Sam x702 1997 PRENTICE 210E New 5.9 cummins engine, turntable bearing and seal, fuel pump and battery. Joystick, Heat and A/C, boom Therepinned, Tree cylinders repacked. that Total Started hours at 12000.

Bucksaw hookup. This loader is it All! used to feed a chipper.

Item1986, ID 13795.

Sam x702 Since Lumbermens has published a monthly circular 1999sawmills, PRENTICE 210E reaching loggers, pallet makers, recyclers and Comes with a bucksaw.

Levers, industrial woodworking 11000 hours.

Repackedplants all cylworldwide. inders and valve body. This

loader has only been used to cut PUBLISHER up logs Woods into 9’Publishing lengths. Never used asADVERTISING a delimber loader.

SALES Item IDMorris 13784.

Sam x702 Woods (888) 401-6367 ext. 704

morris@lumbermens.co 2014 PRENTICE 2384C LOADER PACKAGE MARKETING DIRECTOR with CSI 264 Delimber and JohnUltra Williams (888) 401-6367 ext.

7011050 Rotobec 4048 Grapple.

Only j@lumbermens.co hours! Mounted on trailer with hydraulic stands. condition.

DESIGNExcellent DIRECTOR Heninger ContractorDonna shutting down job.

Item EQUIPMENT ID 13577. Sam x702 REPS Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

** CALENDAR**

2432 2010 PRENTICE SKIDDER with around 3,000 hours on it, It has 30.5 tires al the way also comes with a circle saw. around and has 6,000 hours on Item ID 13879. Austin x703 the machine.

NY STATE WOODSMEN'S FIELD DAYS Item ID 13382. Sam x702 1998 PRENTICE 210E Fri, 18 ItAugust - Sun, August has the 600 20 turbo charged Boonville, New York PRENTICE 310E cummins engine, control valves www.starwebhosting.net/woodsmen/ Good loader for the money. have been redone, ac/heater Item ID 13762. Sam x702 work, it also has slasher saw SOUTHWEST FOREST PRODUCTS EXPO hook ups. Dry machine, working Fri, 25 August - Sat, 26 August PRENTICE 120C BOOM daily.

Hot Springs, Arkansas TRUCK Item ID 13913.

Austin x703 www.arkloggers.com ROTOCHOPPER Great tires, new paint, & lights, with a 350 Cummins Engine72ND 3 2011 MC266T ANNUAL GREAT LAKES stage jake.

ROTOCHOPPER LOGGING & HEAVY EQUIPMENT EXPO Item ID 13900. Austin x703 Thurs, This7isSept a great chipper with only - Sat, 9 Sept 3600 hours.Michigan It has a 500hp C15 Escanaba, 1994 PRENTICE 180D LOG Caterpillar power unit. Comes LOADER with spare bolts, teeth, screens MID-ATLANTIC LOGGING & BIOMASS 11,793 hours, Machine is in and bearings.

Fri, 15 Sept - Sat, 16 Sept good condition, it has been sand Item ID 13837.

Sam x702 Selma, North Carolina blasted and painted, lowwww.midatlantic-logging-biomass­ pro MID-ATLANTIC tires 17.5.

2014 B66TD ROTOCHOPPER expo.com/ LOGGING & BIOMASS EXPO Item ID 12759. Sam x702 This machine is still like new KENTUCKY EXPO on rotor with onlyWOOD 1300 hours 210 PRENTICE LOADER Fri, and 15 Sept 16 SeptThis is a 1600- Sat, on engine.

MOUNTED ON 2006 TRAILER Lexington, track and Kentucky dolly system, which Excellent condition. http://www.kfia.org/ makes it easy to move. Has a Item ID 13505. Sam x702 KentuckyWoodExpo.aspx magnetic head roller, 48” rotor with 28 teeth and a 700hp LATE 80’S PRENTICE 210 LOADER THEC-18 PAUL Caterpillar BUNYAN SHOW power unit.

This is a late 80’s model, it had a Fri, 6 Oct - Sun, 8 Oct This rotochopper sells for over new motor installed 2 years ago Cambridge, Ohio www.ohioforest.org

** INFO LINK**

$600,000.00 new.

FOR Item IDCLASSIFIEDS 13838. Sam x702

TIGERCAT Call 888.401.MENS TIGERCAT 845B See2000 pictures, prices, and it has 8900 hrs. the Hydraulic Location of all equipment Pump haIGERCATs 2000 hrs at on www.LumberMB\ISmagazine.com it. We replaced the saw pump

last summer. Ready to go!

BANDMILLS & HEADSAWS Item ID 13619.

Sam x702

Danckaert Band Resaw - Roughly

2000 10 hours onTIGERCAT this machine845B since it This 845B has 14000 frame has been rebuilt, it has a 24foot in hours with 5000 hours on an 8.3 feed deck 20 foot out feed deck cummins engine.

New sprockets, with 44 inch all therails, bottom andwheels, top and rollers, idlers, 36” tracks, seat and all bells and whistles, its a production new A/C parts.

Track adjusters, machine, with air strain conveyers and all cylinders on head have that go up and down, with airbags, been repacked. Comes with it two sets of Mcdonough a includes 22” hotsaw with 45 degree pressure guides.

Top Casting wheel rotate. This is a very clean cutter, owner just wants to update. is supported on both sides. This Item ID 13939.

Sammachine x702 is an extremely accurate in ve1y good condition, Cuts 130

2004 TIGERCAT 240B

feet a minute also has CLT presses.

KNUCKLEBOOM

Item 13876.

Austincrate x703 engine NewID 5.9 cummins

with 2500 S & W 125 Bandhours, Mill withturntable

good, 243generator CSI delimber, good Caterpillar - Low hours

tires, brakes, and lights. 7500 hours. works,1 or 2" band, track Item 1/2" ID 13666.

Sam22ft. x702 on the mill, electronic computer Set

Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 11

ve

2004 TIGERCAT 620C Single arch, new engine 2 months ago, has about 13,500 hours, needs a couple of windows. Tires at 50%.

Item ID 13667. Sam x702

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Shrink Wrap FireWOOD/WaSteWOOD

“Precision Under Pressure”

2004 TIGERCAT 630C New 35.5’s on rear and 25% on front, ‘93 Barko 180B comes with 2 spares. Engine has Itemhours, ID: 14077 4500 with 12000 machine Contact: Austin ‘97 Two Timberjack hours. new wiring harness.

Ph:Item (888) 401-6367 ID 13749.

Samx703 x702 360C

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

Item2004 ID: 14044 TIGERCAT 845B Contact: Sam with Waratah 622 Processor. New Ph: (888) 401-6367 screen, wheels, sprocketsx702 and wheel

Sell Your WOOD – $300/cord or More!

Double or triple your profits by shrink wrapping wastewood - forewood with WOOD-PAKer! Attractive various size packages can be obtained with our high production, easily operated and affordable machines. Eight machines available. The ideal equipment for producing square bundles-palletizable for ease in storage and transporting.

Inquire for free details. Video and Package samples at nominal fee.

‘13 KMC 2500 Track B & B Manufacturing • 3007 West River Road Skidder • Olean, NY 14760 Item ID: 14078

Contact: Austin Toll Free 1-800-654-5320 Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

BELL’S FIREWOOD PROCESSORS Sam x702

Firewood Processor - This is

• 66 HP CAT Diesel Engine • 44” Circular Saw • 20” Diameter CATCapacity D4H TSK Item ID: 13558 • Single Joystick Contact: Sam Control Item 14073 •(888) 30ID: Ton Splitter x702 Ph: 401-6367 Contact: Austin Cylinder

‘83 John Deere 4850

Ph: (888) 401-6367 x703

Item ID: JW-986495 Corley Complete Contact: J Williams Sawmill Ph: (888) 401-6367 x701 Item ID: 14035 Contact: Austin chain conveyer, 8 way splitter, Ph: (888) 401-6367 x703 on

20,000lb goose neck trailer. Item ID 13916. Austin x703

condition. 35.5 Easily produces condition. tires at 60%. high Tight quality chips with patented ‘Cone’ and Dry. Great value. Item ID drum design.

Can easily load 42’ 13482.

Sam x702 vans John and produce 6 - 8 loads per 2012 Deere 548GIII - Single

day. with Item winch, ID 13882.

Austin x703 arch blade extensions,

EDGERS GANGS 1 new 28L and 3 @&50%.

This is Brewco Saws Two Brewco Saws still a new machine with only 3600 in excellent condition.

Runs great. hours.

Item ID 13780. Sam x702 Item ID 13644.

Sam x702 2012/13 John Deere 200D

automatice firewood processor 4000 SERIES with John Deere power unit with ‘02 Prentice 490

FIREWOOD PROCESSORS log deck.

HasFeller a hydraulic Excavator - This is still a like new 2014 JD 753J Bunchergrapple, - NEW! Please Call for Details 2010 Shopwith Builtonly Wood Processor kickerOnly that 381 all runs off excavator 3000 hours.

-chain Treatand as NEW! hours. orwith visit us online www.bellsmachining.com -Comes It has a 353 Detroit diesel, 40 of a 4 cylinder Mercedes power a stationary rockland Standard warranty expired, but

1-888-995-1965

Financing inch insert saw, 30 foot Available unit.Extended Has a 4’ chain sawon that kicks thumb that tooth can becircle adjusted has Warranty Major 372 Lumbermens  Issue Issue 364 364 Lumbermens   since since 1986 1986 

❘❘

low hours. Control panel includes

Item ID: 14047

tach, oil pressure, Contact: Austinwater temp and amp Cuts logs up to 16”.

Ph: gauges.

(888) 401-6367 x703 One owner and comes with all

manuals and to receipts.

Components 2017 orPurchased 3000 hours. new for $32,500.

Item ID 13865.

Totally loaded with extras.

Has

2004 Bandit Model 4680 - ID hours.

Still aBeast new machine.

Item 3412 Caterpillar 13841.

Sam x702 Diesel engine with John 850 HP. 5300 hrs.-Mill in 2014 Deere 643K There’s good condition.

Just finished 10 not much to say about this feller

Good running condition.

Tigercat knuckleboom, 30' boom,head.

75hp Comes with a 22” tower Item 22” Hot Saw with 40 degree tilt. motor, Rotobec continuous ID 13864. Sam x702 New center bearing and swing

grapple, 5,000 original 2015 John Deere 748L - hours.

This is motor.

Undercarriage at 50% or (excellent condition.).

Item ID1480 still a new skidder only better.

Very clean. with High hours, but

- Pumps recently hrs Dual arch, winch, redone. joystick400 controls, Item ID 13575. Sam x702 on injection always started turn around pump. seat, wide blade and good. in good working order.

22in HD axles.

Was bought new in Jan 2006 TIGERCAT 630C kohing head. head works great.

GRAPPLE SKIDDER and still has factory warranty and

Very good running condition.

Dual Item ID 13185.

Sam x702 an extended warranty can still be Arch grapple.

New 35.5 tires.

Only 1999 Barko 160D - new engine bought for this skidder.

Save a with 4500 hours. Winch. Compare to

approximately hours. Hour lot of630 money on1500 this slightly used new at $310,000! meterItem dont TheSam lastx702 2 owners skidder over a brand new one.

IDwork.

13576. haveID only usedSam it tox702 load trucks or Item 13933.

2007 TIGERCAT 250Ba CTR as a backup as needed.

Has 2015 John Deere 748L - This

W/WARATAH PROCESSOR

delimber, hasnew beenwith rebuilt. skidder is grapple still smells 2007 Tigercat 250B Crawler with Boom1000 cylinders have leaks. only hours of use.minor Mounted

2005 Waratah 622B Processing

Item IDX9500 13694.

Sam x702 on 30.5 32 tires with a new Head. hours.

The set 622B 94 Barko 275 Excellent value Waratah head is in great shape. of tire chains. Dual arch, winch, 3

new wheel motors the 5.9 head with lowcontrols, at hours aton 3,500. joystick turnaround seat,all new pins and bushings.

Head has CUMMINS continuous grapple. wide blade and HD axles.

Save

been totally rebuilt less than 500

Runs Great!.

Item IDnew 13740.

Sam on over skidder hrsthis ago.

Thea brand swing motor on the x702 because thisjust is still new.

Item ID carrier has been rebuilt and a

new Hydraulic pump. U/C at 50%.

13935.

Sam x702BELL Currently processing 600 1990 Bell Super T 440B/C - This Bell has 84/85 John Deere -tons/day.

This Runs great. Owner shutting down.

Acre clearing job,brand readynew to work! buncher.

It’s still out Remote control.

Big production of the box with only 1452 hours.

 List  seLL seLL   exchange exchange   buy buy   save save  List

BARKO Has a 2000 hour warranty.

It comes 2005 TIGERCAT 822 TRACKED 1994 Barko 160B Electric FELLER BUNCHER mounted on 30.5 tires at 95%.

for hours. Total hours 19,500.

LOGGING EQUIPMENT - Smallwindows manufacturer in keep PA has Tinted to help the Includes the JD 22” Hot Saw with FIREWOOD TUMBLER made theheat bestout. valued sun and Itemlog ID splitter.

13856.

40 degree tilt. BANDIT 36” wide flotation • Sturdy HSS Steel Welded Handles up to 32”. Uses 1999 Bandit Tracked Disc Sam x702logs pads.

Simply1900 perfect condition.

• 4’ Diameter Barrel Chipper - Cat Under Carriage at 13HPJohn Honda motor.

Manual start 2013 Deere 437D - This loader New price is $445,000.

Save $40,000 • Clean Out Chute • Removes Debris & Bark as large as 2 ¼” but electronic option 50%only or better.

475 hp Cummins is still like brand new.isItavailable. has been for 380 hours of use!.

Item ID • Works with all of our Double chain Has Log Lift.

Uses 4-way wedge Diesel.

7500 Hours.

One owner. well taken care of with only 2932 13574. Sam x702 Hydraulic Lift conveyors adjustable toOptional single two way. Series Great Well John maintained.

ItemExcavator ID 13294. hours.

CSI•delimber, Kodiak, 2014 Deere 160G Honda Power Pack Available Value!

PA. Item ID 12062.

Sam x702 Sam x702 3 hydraulic landing gear. You will Low hour excavator with only 1500 Firewood Processor -Made This a Inisclean. not find another loader this Canada homemade processor with a 10’ Item ID 13822.

Sam x702

16,000 on the machine, new Item hours ID: 13920 motor put in around 10,000 hours, Contact: Austin548D John Deere CTR Delimber trailer included, Ph: (888) 401-6367 x703 and Item ID: 14024 reversible CSI Bucksaw, will sell Contact: SamBucksaw. with, or without Ph:Item (888) 401-6367 x702 ID 13911. Austin x703

13238.

Chrisfor x700 well cared bya single owner of hours.

Owned by construction land clearing business.

Often idled 1995 Barko 775isBno Feller Buncher company that longer needed.

a Chomper Model 16 PDA

Best& Value Portable Log Splitter Sam x702 manually.

Great buy onChoose this Deere.From! counterweight/running boards.

Many Models Options to

Only 4200 hours. Factory warranty with 5000 1700 hours. hours, Great in veryrunning good until

‘952005 John Deere C6 TIGERCAT 230B Tight, dry machine, with TreeandFarmer

capacity!. Item ID 13421. Sam x702

E-mail: bbmfg@verizon.net • Web: www.bbmfg.org

‘05 Gehl CTL 70

motor. Owner used it for a month before parking it. 5,000 hrs. on 8.1 cummins engine, and 6990 total hrs.

Item ID 13625. Sam x702

a brand came new Duetz engine.

Lever skidder in a box to Lavaco Item ID 13360. Sam x702 control,Co 33” pump and and is tranny Power inbar, Colorado a ❘❘

 Lumbermensmagazine.com Lumbermensmagazine.com 

2009 TIGERCAT 620C This skidder only has 10575 hours with a cummins engine and fire suppression system.

Tires are 30.5 X 32 with 20% front, 1 new rear and 1 rear at 50%, 4 tire chains at 40%.

Dual arch and no winch, extra fuel tank and tight center pins.

Excellent skidder ready to start dragging wood.

The Tree Item ID 13928.

Sam x702 that Started

it All! H250 2009 TIGERCAT TRACKED HARVESTER Since 1986, Lumbermens has Tigercat Model 575 processing published a monthly circular head.

10,880 hours.

U/C at reaching sawmills, loggers, palletEverything makers, recyclers and and 60%. runs well industrial woodworking plants has been very well maintained. worldwide.

Item ID 13592. Sam x702 PUBLISHER Woods Publishing 2010 TIGERCAT 480 TRACKED MULCHER ADVERTISING SALES 3410 hours. $32,000 Morris Woodsin recent (888) 401-6367 ext. 704 upgrades and repairs.

Fecon morris@lumbermens.co BH250 Mulching Head.

Item ID 13502.DIRECTOR Sam x702 MARKETING John Williams (888) TIGERCAT 401-6367 ext.

701 2011 620D This is aj@lumbermens.co low hour skidder with

only 5500 hours on a cummins DESIGN DIRECTOR Donna Heninger engine and a fire suppression system.EQUIPMENT Comes mounted on REPS 35.5 tires atSam 50%Wall back and 40% front (888) and 401-6367 good chains ext. on 702all 4 sam@lumbermens.co

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

** CALENDAR**

2015 TIGERCAT 234B LOADER Model 234B. Only 300 hours on this machine, this machine NY STATEisWOODSMEN'S DAYS extremely fuel FIELD efficient, and August - Sun, 20 August 2011 TIGERCAT 845C Fri, 18 very quiet.

In the cab, it has New York seats. runs Just over 4000 hours. 5400 Boonville, heated and cooled www.starwebhosting.net/woodsmen/ head and 340 degree rotation, like new. undercarriage at 70%. Mercedes Item ID 13880. Austin x703 SOUTHWEST FOREST PRODUCTS EXPO engine and fire suppression sysAugust - Sat, 240B 26 August tem. This is a great buy forFri, for 25 99 TIGERCAT LOADER Hot Springs, Arkansas such a super clean track cutter.

This loader is a package www.arkloggers.com Item ID 13927. Sam x702 deal, portable, and mounted a dump truck from the 72NDon ANNUAL GREAT LAKES 2012 TIGERCAT 724E eighties.

Also this loader can LOGGING & HEAVY EQUIPMENT EXPO FELLER BUNCHER be mounted back on its trailer Thurs, 7 Sept - Sat, 9 Sept 2950hrs. 30.5 tires. Like new Escanaba, with delimber.

It has 4509 hrs Michigan machine. One owner. Very well on a reman Cummins engine. maintained.

ItemLOGGING ID 13455.&Sam x702 MID-ATLANTIC BIOMASS Item ID 13528. Sam x702 Fri, 15 Sept - Sat, 16 Sept TIGERCAT 230B Selma, North Carolina 2014 630 D TIGERCAT This Tigercat has a Cummins www.midatlantic-logging-biomass­ MID-ATLANTIC 1300hrs like new inside 35 by 5.9 liter 360 Continuous expo.com/ LOGGING & BIOMASS EXPO 15, CB, light package, large roatation on the grapple w/ grapple and wench. a 30’ reach the boom.

KENTUCKY WOODonEXPO Item ID 13408. Sam x702 Fri, Joystick Controls, triple 15 Sept - Sat, 16 Sept pump hydraulics, Stick and swing Lexington, Kentucky 2014 TIGERCAT 630D function w/ a fully enclosed http://www.kfia.org/ GRAPPLE SKIDDER Cab. Machine is located in KentuckyWoodExpo.aspx Dual Arch Grapple. Just 1990 Florida. hours. 3 year/5000 hour PT Item ID 13643.SHOW Chris x700 THE PAUL BUNYAN warranty. 35.5 tires with dualing Fri, 6 Oct - Sun, 8 Oct rings at 60%. Wide blade. Winch. TIGERCAT Cambridge,250T Ohio TRACK LOG Item ID 13526. Sam x702 LOADER www.ohioforest.org Cummins 8.3 engine and tires. Has the bigger 630 axles and no winch. Center pins are tight and extra fuel tank.

Item ID 13929. Sam x702

** INFO LINK**

n se us lls a cl ro e " k in e t h ard a r and " st B & B Mfg. ...............................

18

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

to Meet Your B. Designed H. Payne ..............................

16

AD SUBMISSIONS

Baker ...................................... 5, 7

Crosstable Lumber May be sent to­ Grade Printer morris@lumbermens.co POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Mill's Requirements

Timber HarvesTing Meadows Mill, Inc. ................ 33 equipmenT

M&F Gauge ............................. 28 HaHn MacHinery inc, Menominee Saw .....................

29 P.O. Box 220 • Two Harbors, MN 55616

Custom www.hahnmachinery.com Metal Detector's Inc. .............. 30 Inkroll urn your loader into a self-propelled firewood capable of picking logs out of the pile TprocessorSharpening Brute Force MfgSizes . .....................

Midwest .............. 26 Lumber and cutting and splitting them onto the ground or in 831 CrossTable conveyor or into a trailer, truck or bin. Operated by Printer Buck EquipmentDifferent (AIM) ........ 36 Grade Mor ..................................... one bark person seated in the comfort and safety of the9 loader’s cab, the HFp160 is designed for commercial Colors! firewood operations and, when compared to traditional

Bell's Machining ..................... 27

Corley Mfg .............................. 32

Multitek ................................... 12 mechanical firewood processing methods can:

Panel Printer CRD Metalworks ....................

25

Piper's Saw Shop .................... 13 • Reduce manpower requirements

The Lumberman's Exchange is CW Mill-ArmorHog .............. 17 published monthly by Woods CW Mill-Hogzilla ................... 15 Publishing, P.O. Box 1916, Columbia, TN 38402. All rights Dyna Products ........................ 35 reserved. All editorial/ advertorial submissions are used at the Empire Hydraulics ................... 8 4 odiscretion LumberofMill Grade Printers the publisher and may yea 0 Pallet Printer obe Panel Mill GradeofPrinters edited for purposes clarity Great . ....................

34 r Mfg serLakes /stripe Marker vin s space. Although efforts have oand Laminated Beam all Printers g t e Hahn ...................... 3 lu hMachinery made accuracy of obeen Wet INKto&ensure INK Roll Systems ind mbe content submitted by advertisers r us o Edge/ Dual Edge Printers HursttBoiler ............................. 14 ry and writers, the Lumberman's oExchange, Stripe Markers and Stud Printers its principles and Iron Bull ................................... 21 oassociates, Hand Stampers and Hammers are not held liable for oerrors Custom Designed Marking SystemsKilgore Saw ............................. 22 or omissions.

Reproduction, Email : sales@claussenallmark.com Upon Request. in Available whole or part, is prohibited with­ Visit : www.claussenallmark.com Lignomat ................................. 24 out written consent.

Call : 1-800-252-2736 ©2017 Woods Publishing

• Reduces fuel consumption Rotochopper ............................ 40

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

•

Reduce work comp costs

•

Improve safety

• Provide greater mobility Row Electric ............................ 20 • Dramatically reduce set up time •

Reduce handling of the wood

• Lower your cost per cord .................. for an improved bottom Sawmill Exchange 11

pumps have been done FOR CLASSIFIEDS probably 8,000-9,000 hours ago.

It has 45,000 hours. This Call 888.401.MENS machine has never run in the See pictures, prices, woods.

It has been in aand yard Location all equipment at the wholeof time.

Tracks are around 50% and this machine www.LumberMB\ISmagazine.com has been extremely well taken care of!

BANDMILLS & HEADSAWS Item ID 13608.

Chris x700 Danckaert Band Resaw - Roughly 10 hours on this machine since it

2006 TIGERCAT 630C

has been rebuilt, itSKIDDER has a 24foot in GRAPPLE

Verydeck good running condition. feed 20 foot out feed deck

Dual44Arch grapple.

New 35.5 with inch wheels, and all the

tires.

Only 4500 hours. Winch. bells and whistles, its a production Compare to new 630 at machine, with air strain conveyers $310,000! that go up down,Sam with x702 airbags, Item IDand 13576. it includes two sets of Mcdonough

2014guides.

630 DTop TIGERCAT pressure Casting wheel

1300hrs like new inside 35 by 15, CB, light package, large is an extremely accurate machine grapple and wench. in ve1y condition, Cuts 130 Itemgood ID 13408.

Sam x702 is supported on both sides. This

feet a minute also has CLT presses.

TIGERCAT 630D Item2014 ID 13876.

Austin x703

GRAPPLE SKIDDER Dual Arch Grapple. Just 1990 Caterpillar generator - Low hours hours. 3 year/5000 hour PT on the mill, electronic Set warranty.

35.5 computer tires with dualing 1/2" rings 60%. works,1 or 2"atband, 22ft.Wide track blade.

Cat 3406Winch.

140KW Genset, 12,400 Item ID 13526. Sam x702

S & W 125 Band Mill with

hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

HFp160 2010Hahn Cardinal HD Carriage

Firewood pro

Carriages (Sawmill) - Cardinal

Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including 48" bottom saw and 36" top saw

STACKING RAC

line

Select Sawmill ......................... 19 The standard HFp160 is equipped with a 4-way splitter head with hydraulic height adjustment and 16” and 20”

Smith Sawmill ...........................

4 cut lengths.

Optional interchangable 6-way and 8-way splitter heads and longer cut lengths are available.

The Paul Bunyan Show ......... 39

For the past 37 years, Hahn Machinery has been noted for offering simple, rugged, and productive forestry

Thomas ..... 10 equipment Industrial and the HFp160Controls is no exception

ForGrove more information on the Union Saw & Knife .. 2,—37 HFp160 Firewood pro

Universal Refiner ................... 23

1-800-483-8825

for complete details on this or any Hahn firewood WoodMizer ................................ l processor or forestry equipment call or email info@hahnmachinery.com

Used Forestry eqUipment For sale

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

❘

www.BakerProducts.net 800.S48.6914 I S73.663.7711

 sell yoUr eqUipment today

 24/7 SUPPORT 0 SUPPORT

❘

 24/7 sUpport

❘  (888) 401-MENS

❘ L!  (888) 401-MENS 401-MENS

No. 3

NO. 13

TIMBCO

1999 TIMBCO 820D CLAM

Phone 1996 TIMBCO T425B FB315.284.4126BUNK FORWARDER Fax 10,300 hours. New engine w/2008 Rotosaw Intermittent 315.849.2045 less than 500 hours ago. Can Saw Head. Machine hasWebsite www.empirehyd.com accept bunks, but none with 540 degree non continuous Email machine. Owner has two sets “Precision Under Pressure” info@empirehyd.com rotation on upper. 9900 hours.

New Undercarriage. New glass in cab. Very good running condition.

Rotosaw has 360 degree rotation.

Cummins 6CT8.3 engine with 215 HP. Machine runs great. Working in select hardwood today.

Item ID 13548. Sam x702

1997 TIMBCO 820C CLAM BUNK FORWARDER “4000” original hours. 20.3 x 25 rubber at 70%. Hand sanded and painted, brand new computer and Scorpion controls, added speed control. 2 sets of tracks , all new Lexan. Located in Alberta, Canada. Customer will pay shipping to closest US entry point.

Item ID 13532. Sam x702

of tracks like new he will add for additional $20,000.

Item ID 13494. Sam x702

1999 TIMBCO TF-820D FORWARDER 11k hrs on machine, new Cummins engine at around 8k hrs and has fresh drive pump & imp. pump. 28L 26 tires some great, some decent. Machine is ready to work, but could use a little fixing here and there. the bucket is sloppy could stand to be pinned and bushed. No major issues!

Item ID 13212. Sam x702

2000 TIMBCO 415D w/2005 FABTEK 4-ROLLER PROCESSOR 21,000 hours on meter. New 1998 TIMBERLINE STROKE JD 6 cylinder engine in 2011 DELIMBER 13428 Victory Ln. // PO Box 124 has 7000 hours.

U/C at 65%.

8400 hours.

U/C at 60%. Will Adams Center, NY 13606 Extensively rebuilt with new crank and run. Owner retired. swing motor, new charge pump, Machine idle for past year. new high speed saw motor, Item ID 13599. Sam x702 new main hydraulic pump, new oil cooler, all main cylinders

repacked. Package includes extra final drive, extra computer screen, and extra swing motor.

Has new jet fit system. This machine is loaded...has pro-heat system for cold weather start.

Has fire suppression system.

All working! Hydraulic Oil just totally changed (100 new ‘16 Halverson H140 gallons) with new filters.

Item ID 13598.

Sam x702 Skidsteer (DEMO)

Item ID: JW-909632 2000 TIMBCO 425D W/33” Contact: J Williams BAR SAW HEAD Ph: (888) 401-6367 x701 40 degree tilt on head. 540 degree rotation on upper body. One year old Cummins 6CT8.3 engine.

Resealed pumps. Rebuilt valve bank. 90% undercarriage. Can accept hot saw. Fire suppression system. Auxiliary oil cooler. Good running machine.

Item ID 13549. Sam x702

TIMBCO ‘13 2000 KMC 2500445D Track Recent engine and pump last Skidder winter.

New sprockets and rollers.

22” quadco Item ID: 14078hot saw. Owner retired.

Located in Montana.

Contact: Austin Item ID 13790.

Sam x702 Ph: (888) 401-6367 x703 2005 TIMBERPRO 830TF off onto a FORWARDER conveyor. This is a very 6580 hours. Very good conwell built processor. Item ID 13820.

Sam x702

IntegrIty • PrecIsIon • QualIty • Value ‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

‘83 John Deere Woodmaster 4850

chain conveyer, 8 way splitter, on

Itemwhy ID: 14073 See we are your BeSt Source for bandsaw blades!

20,000lb goose neck trailer. Item ID

Contact: Austin offer401-6367 the highest quality welds and ourx703 people use the 13916.

Austin Ph:We (888) x703

highest level of integrity and precision give you best Best ValuetoPortable Logthe Splitter blades the business—we ship all overinthe withbandsaw 1700 hours, in veryingood - Small manufacturer PAUS. has Satisfaction guaranteed! condition. Easily produces high always made the best valued log splitter. quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

Handles logs up to 32”. Uses

13HP Honda motor. Manual start

thIn Kerf

but electronic option is available.

Band saw Blades Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702

Ask About Our Dismanteling Blades homemade processor with a 10’ Firewood Processor - This is a

log deck. Has a hydraulic grapple, chain and kicker that all runs off

- It has a 353 Detroit diesel, 40 of a 4 cylinder Mercedes power k c e inch tooth circle saw, 30 foot unit. Has a 4’ chain saw that kicks Ch uinsert O t Our Quality • Our Service • Our Price

1-888-857-5153

372  Issue 364

Lumbermens  since 1986

❘

 List  seLL 

dition. Tracks for all bogies.

710/45-26 tires at 70%. Includes bolsters and back rest.

Comes with 36” grapple with grapple saw option. Set up with harvester hydraulics according to owner.

Item ID 13161. Sam x702

‘93 Barko 180B

Item ID:TIMBCO/VALMET 14077 2006 Contact: Austin 445EXL W/BAR SAW Ph: (888) 401-6367 9200 hours.

Onex703 owner machine. 33” Bar Saw Head with 360 degree rotation. Tracks at 60%. Runs good and machine is tight. Reman Cummins 6BT8.3 one year old.

Item ID 13556. Sam x702 TIMBER KING

2005 TIMBERKING 560 DS Same as Prentice 2384,C6 9500 ‘95 John Deere hours on perkins engine with Tree Farmer new injector pump and ECM byItem Cat. ID: CSI13920 delimber, good A/C, tires, and lights.

Contact: Austin Item ID 13636.

Samx703 x702 Ph: (888) 401-6367 2006 711 TIMBERKING With 6,716 with capacity!.

Itemhours.

ID 13421.

Sam7,000 x702 logmax processing head& fire BARKO suppression system. Under 1994 Barko 160B ElectricRuns and carriage is real -good, knuckleboom, works Great! 30' boom, 75hp Item ID 13737.

Sam x702 motor, Rotobec continuous grapple, 5,000 original hours.

Real Tuff

(excellent condition.). Item ID

Firewood Processor - This is

13238. Chris x700

a Chomper Model 16 PDA

$16,900

1995 Barko tm 775 B Feller Buncher BaleR&BaggeR

automatice firewood processor

- Pumps recently redone. 400 hrs with John Deere power unit with Save $$$ on Bedding—Bale it Yourself! on injection pump.February always1,started low hours. Control panel includes Effective 2018 Electric or Diesel, Manual or Automatic good. in good working order. 22in tach, oil pressure, water temp and kohing head. head works great.

REAL TUFF INDUSTRIES Item 13185.

SamCo., x702 Manufactured

by ID M&F Gauge & Specialty Inc.

amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

84/85 Deere PO BoxJohn 693 Phone: 325-641-8300 440B/CFax: 325-643-3243 approximately 1500 hours. Hour

1999 BarkoTexas 160D - new engine with Brownwood, 76804

BUILT TO LAST

Item ID: 13908 meter dont work. The last 2 owners Sam x702 Thank you for inquiring about our Real Tuff Baler! From baling wood shavings to aluminum Sam cans, the Real Tuff Baler is Contact: built to last, and priced for a quick return on your investment!

LOGGING EQUIPMENT have only used it to load trucks or Ph: (888) 401-6367 x702 Wood-Mizer LT40 Real Tuff Baler www.realtuffbaler.com

Dear Prospective Customer,

BANDIT • EasyID: to use Item 13995 1999 Bandit 1900 Tracked Disc • Built of high quality materials Contact: Austin and workmanship Chipper - Cat401-6367 Under Carriage Ph: (888) x703at

Real Baler Dimensions & Specifications as aTuff backup as needed.

Has a CTR

- (2) Hydraulic Cylinders are controlled by delimber, has been rebuilt. using a twograpple spool valve

• Heavy duty tohp enable a broad 50% or better.

475 Cummins spectrum of baling options Diesel. 7500 Hours. One owner.

• Easily loads by conveyor or Well maintained. Item ID 13294. manual method Sam x702

2004 Bandit Beast Model 4680 -

havevolt minor leaks.

-Boom 30 H.P.cylinders motor (220/440 3 phase) starter not included Item ID 13694. Sam x702 - 25 G.P.M. Pump

94 Barko 275 - Excellent value

‘94

Ite Co Ph

- 50 Gallon reservoir capacity

with low at hours at 3,500. 5.9

. Easy to use

- Only the highest quality industrial comcontinuous grapple. . Easily CUMMINS loads by conveyor manual method ponents areor used . Built of high quality materials and workmanship

. Heavy Duty to enable a broad spectrum of baling options

Runs ID 13740. Sam MostGreat!.

Popular BalerItem Sizes

Real Tuff IndusTRIes x702

3412 Caterpillar Diesel engine

Real Ruff Baler Size 12” x 16” x 36” 12” x 16” x 32” 11” x 17” x 36” 8” x 18” x 36” 5” x 10” x 16” - Call For Price

Bale Size

Bales per Hour

4.0 cubic foot bale 3.5 cubic foot bale 3.9 cubic foot bale 3.0 cubic foot bale 0.4 cubic foot bale

50 - 60 bales per hour 50 - 60 bales per hour 50 - 60 bales per hour 50 - 60 bales per hour 50 - 60 bales per hour

BELL good condition.(325) Just finished 10 1990 Bell SuperSuper T -643-3243 This Bell Phone: 641-8300 Fax: (325) ‘90 Bell T has with 850 HP. 5300 hrs. Mill in

. Custom baler’s can be manufactured to your specifications .

M & F Gauge & Specialty Co., Inc. ID: Acre clearing Manufactured job, ready to by work! aItem brand new13896 Duetz engine. Lever PO Box 693 • Brownwood, Texas 76804 Contact: Sam Remote control. Big production control, 33” bar, pump and tranny www.realtuffbaler.com Real Tuff Baler Dimensions & Specifications 2 - Hydraulic Cylinders are controlled by using a two spool valve 30 H.P. motor (220/440 volt 3 phase) starter not included 25 G.P.M. Pump 50 Gallon reservoir capacity Only the highest quality industrial components are used

‘89 Timberjack 380A exchange  buy  save Item ID: 14039 Contact: Austin

Ph: (888) 401-6367 x702 Real Tuff Baler Price: $12,997.00

 Lumbermensmagazine.com

Terms: 50% deposit upon receipt of purchase order. The blance is due upon completeion which will be approximately thirty days from placement of order. F.O.B. Brownwood.

❘

03/08

John Deere Dual Arch Grapple,

‘9 45

Ite

TIMBERJACK

1969 TIMBERJACK 225D SKIDDER ring chains front ice chains rear, very good condition!

Item ID 13215. Sam x702 1968 230 TIMBERJACK SKIDDER New 353 Detroit engine, new 84/85 John deere The Tree tranny. Runs great!

Machine is 440B/c that Started tight.

She’s a workhorse!

Itemid: ID13908 13470. item it All!Sam x702 contact: Sam Since 1986, Lumbermens has 1979 TIMBERJACK Ph: 800-315-9950 x603240 published a monthly circular GRAPPLE SKIDDER W/ reaching sawmills, WINCHloggers, pallet makers, recyclers and Excellent running condition. industrial woodworking plants New brakes, 23.1x26 tires worldwide.

Holds air. Best sounding 453 Detroit outPUBLISHER there. Starts in Very Woods Publishing cold weather on first try.

ADVERTISING SALES Item ID 13560. Sam x702 Morris Woods (888) 401-6367 ext. 704 1982 TIMBERJACK 240A morris@lumbermens.co

Tight, Clean Skidder! Brand New ‘06MARKETING Western star Crate Motor 453DIRECTOR has roughly John Williams michigan special 500 hrs on it,winch rebuilt, (888) 401-6367 ext. 701 starter rebuilt, master cylinder j@lumbermens.co item id: 14011 rebuilt, new batteries, battery contact: austin DESIGN DIRECTOR wires 4 brand new ice chains, 6 Ph: 800.315.9950 x606 Donna Heninger new slides n tear drops, no leaks EQUIPMENT REPS tight. n all the pins are super Sam Wall good shape. unit has been very New belts nThis some new hoses.

(888) 401-6367 ext. 702 Item ID 13557.

Sam x702 well taken care of. 13,500 hours. Item sam@lumbermens.co

ID 13710. Sam x603

Austin Woods 230A 1989 TIMBERJACK It has a 4bt cummins engine, austin@lumbermens.co Grapple cleanshift, and unique 4 speed- Very manual and only ADDRESS machine.MAILING 6800 hours and wellcomes 3,411 original hours, P.O. firestone Box 1916 23.1-26 with 4 new maintained by one owner. Young Columbia, TN 38402-1916 tires.

The transfer case winch Swing Boom grapple gives & you extra (888) 401-6367 have all new clutches, seals, and reach andAD capability.

30.5 x 32 tires at SUBMISSIONS bearings. New brakes have been May be sent to­ 70%. A/C and Heatas runnew great.master Pins installed as well morris@lumbermens.co tight. Hydraulics Engine cylinders.

Verydry. clean andstrong. tight POSTMASTER machine.

Item ID 13357. Sam x603 Send address changesx703 to: Item IDDeere 13885.

2008 John 344JAustin - Only 900

2008 JD 648H w/Swingext.

Boom (888) 401-6367 703

Lumberman's Exchange

P.O. Box 1916 Hours!! Great running condition,

1993 TIMBERJACK 1010 Columbia, TN 38402 z-bar, 3rd valve, ride control, intake FORWARDER The Lumberman's Exchange is heater for cold weather starting, 16,000 hours.

Good running published6monthly byTracks Woods for rear condition. wheeled. heat/ac, stereo. Item ID 13034. Sam Publishing, P.O. Box 1916, bogies and chains for front tires.

Columbia, TN 38402. All rights x603 Item Sam x702 reserved.ID All13446. editorial/ advertorial 2008 John Deere CT332 - This skid

submissions are used at the discretion of the publisher andstill may steer hasTIMBERJACK only 2200 hours380B and 1993 PG be edited for purposes of clarity looks nearly new.

NewTRIMMER Starter, fresh HIGHLIFT TREE and space. Although all efforts have s/n CM4478, 5,152 hours, made90hp to ensure accuracy of oilbeen change, engine.

Has quich content submitted by advertisers Delivered New in 1995, attach and comes with magnum Cab and writers, Lumberman's with A/C, 5theblades, 75 reach, Exchange, its principles and mulcher, bucket and high flow Branton Winch, Push Blade, associates, are not held liable for hydraulic pump for the mulcher.

4X4, Firestone 67X34.00/26 errors or omissions. Reproduction, in whole or part, isfor prohibited with­ This is@ a great buyCounter the hours and tires 90%, Weight, outcylinder written consent.

6 Cummins Diesel attachments. Item ID 13855. Sam ©2017 Woods Publishing

** CALENDAR**

Engine. FOB:Okeechobee, FL. Item ID 13090. Sam x702

1994 TIMBERJACK 450C STATE WOODSMEN'S FIELD DAYS Grapple with winch, newNY transFri, 18 August - Sun, 20 August missiion and hydraulic pumps.

Boonville, New York Item ID 13826. Sam x702 www.starwebhosting.net/woodsmen/ 1997 TIMBERJACK 240D SOUTHWEST FOREST PRODUCTS EXPO This skidder comes with 23.1 Fri, 25 August - Sat, 26 August X 26 tires at 95% rear and 30% front. New brake bands in winch Hot Springs, Arkansas www.arkloggers.com and good cable. Engine was rebuilt 2 years ago. Good strong 72ND ANNUAL GREAT LAKES running machine.

LOGGING & HEAVY EQUIPMENT EXPO Wood-mizer lt40 Item ID 13917. Sam x702 Thurs, 7 Sept - Sat, 9 Sept item id: 13995 Escanaba, Michigan contact: Austin 1998 TIMBERJACK 360 Ph: 800-315-9950 x606 CABLE SKIDDER MID-ATLANTIC LOGGING & BIOMASS This is an excellent skidder with only Fri, 15 Sept - Sat, 16 Sept 6650 hours. New center section.

Selma, North Carolina Cummins engine with electronic www.midatlantic-logging-biomass­ MID-ATLANTIC automatic transmission. expo.com/ LOGGING & BIOMASS EXPO Item ID 13777. Sam x702

KENTUCKY WOOD EXPO

1998 TIMBERJACK 460 Fri, 15 Sept - Sat, 16 Sept Excellent Condition. Runs great. Lexington, Kentucky WOODS READY. http://www.kfia.org/ ‘97 timberjack Item ID 13545. Sam x702 KentuckyWoodExpo.aspx

240d

2001id: TIMBERJACK 460C THE PAUL BUNYAN SHOW item 13917 This is a single arch with winch Fri, 6 Oct - Sun, 8 Oct contact: Sam with only 6800 original hours.

Cambridge, Ohio Ph: 800-315-9950 x603 This is a very low hour machine. www.ohioforest.org Cummins 5.9 engine has a crack x603 in it. It can be loaded onto a 2009 John Deere - Loader with lowboy.

This 437C would be great delimber. 13000 hourswith with udpated starter skidder a new engine. turntable, needs glass. Using Item ID Sam Item x702ID everyday, just13829. downsizing.

** INFO LINK**

B & B Mfg. ............................... 18 13787. Sam x603 2005 TIMBERJACK 460D B. H. ..............................

2010 JD Payne 648H Skidder - 6500 hours.16

Same thing as a John Deere Bakerwith ......................................

5, in 7 Comes 30.5 Tires12000 - Two NEW 648GIII. Around Hours with new engine, dual arch, front and Two at 40%..................... in Rear + One Bell's Machining 27 comes withExtreme 77 X Duty 44.00 X 32 spare at 50%.

Axles Brute3 Force Mfgand . .....................

31 tires. at 60% 1 new one. with Dueling Rings. Heat/AC work Excellent skidder. (AIM) ........ 36 Buck Equipment well.

Factory Fuel Heater.

Item ID 13709.

SamCanadian x702 Corley Mfg .............................. 32 Light Pkg. All factory updates CRD Metalworks 2005 TIMBERJACK installed.

125’ of 5/8”....................

Main608B line. 25

This cutter has x603 10800 frame Item 13533. Sam CWIDMill-ArmorHog .............. 17 hours with a new undercarriage 2010 Deere 1110E...................

Forwarder 15 CWJohn Mill-Hogzilla with less than a 1000 hours, 36” - SuperItClean machine.

8 Wheeled. pads. does have some small Dyna Products ........................

35 Only 5800 hours.is One ownerback and to leaks.

Owner going Empire Hydraulics ...................

8 rubber tired cutters because his well maintained.

Hard to find them job has changed.

Great . .................... with lowLakes hours Mfg like this!.

Item ID 34 Item ID 13898. Sam x702 HahnSam Machinery ...................... 3 12947. x603

2010 John Deere.............................

703J Harvester Hurst Boiler TIMBERJACK 240 - 14 9622 Hours.

One Owner Machine.

In excellent condition!

Well Iron Bull ...................................

21 maintained with 453 detroit.

Good undercarriage. Recent boom Kilgore Sawparts. ............................. 22 Lots of Well new update. maintained. Runs very Item ID 13785.

Sam x702 24 Lignomat .................................

well. Will include service trailer. Item

uSed FORESTRY ForeStrY EQUIPMENT equipment FOR For SALE Sale ❘❘ - USED SALE

M&F Gauge ............................. 28

Meadows Mill, Inc. ................ 33

FOR CLASSIFIEDS® Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage,

Menominee Saw ..................... 29

sawyers cab, computer controls,

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Midwest Sharpening.............. 26

carriage knees, husk including

Morbark ..................................... 9 Multitek ................................... 12 Piper's Saw Shop.................... 13 Rotochopper............................ 40 Row Electric ............................ 20 Sawmill Exchange .................. 11

48" bottom saw and 36" top saw

STACKING RAC

Select Sawmill ......................... 19 Smith Sawmill ........................... 4 The Paul Bunyan Show ......... 39 Thomas Industrial Controls..... 10 Union Grove Saw & Knife.. 2, 37 Universal Refiner ................... 23 WoodMizer ................................ l

www.BakerProducts.net 800.S48.6914 I S73.663.7711

 SELL Your YOUR equipment EQUIPMENT todaY TODAY ❘ ❘ 0 24/7 24/7Support SUPPORT (800) (888)315-9950 401-MENS 401-MENS l§ Sell TODAY SUPPORT ❘ ❘ L!

No.15 17 NO.

TIMBERJACK 380 SKIDDER Phone 1979 TIMBERJACK 230 Tight machine. Runs great. Low FORWARDER 315.284.4126 FaxGood running forwarder with Hrs. One owner.

315.849.2045 Item ID 13468. Sam x702 Website 80% rubber. Serial Number: www.empirehyd.com 792888. Open cab. Detroit Email TIMBERJACK GRAPPLE engine. Simple but hard working “Precision Under 460 Pressure” info@empirehyd.com SKIDDER machine. Very clean for its’ age.

This machine is an excellent Hard to find. condition. Running daily!

Item ID 13057. Sam x702 Item ID 13860. Sam x702 1996 TIMBERJACK 230 ‘69 207 TIMBERJACK FORWARDER CABLE SKIDDER 15,000 hours. Good running This Machine has a Brand condition. Working today. Serco new 4 cyl Perkins Engine, Loader. Dry and still runs strong.

Major Overhaul out of frame.

Item ID 12943. Sam x702 Transmission has been completely overhauled out 1980 TIMBERJACK 240E of frame. Reverse box also CABLE SKIDDER overhauled out of frame. Has a Has the big 23.1x26 tires (60%) new Injector pump and all new with brand new chains on all 4. injectors. 25% on tires on it.

Detroit 4-53, Gearmatic 119 Item ID 13283. Chris x700 winch with 10 chokers. 4 speed manual transmission. Profession‘88 450B TIMBERJACK ally made grapple on front blade.

Put new centerpins in 8 months Just put a Brand new Hercules ago, it has a new eslking beams Winch on. This machine starts, & new radiator. Goo winch, 100” runs and operates like new. You Victory Ln.drive // PO Box 124 Esco13428 grapple, all new lines, won’t find one in better shape.

NYmotor, 13606 Item ID 13542. Chris x700 excellentAdams 6 cyl Center, cummins good brakes. It’s skidding 25-30 1986 TIMBERJACK 240A SKIDDER loads a week on smaller jobs.

23.1 tires. Recently overhauled Item ID 13327. Chris x700

engine. Machine close to 13,000. Engine only 400 to 500 hours.

Item ID 13944. Austin x703 TIMBERJACK 380B DOUBLE ARCH SKIDDER 5.9 cummings with 4 speed power shift transmission.

‘16 Halverson New gauges on theH140 dash so hours unsure. New LED lights Skidsteer (DEMO) all around.

Motor has rotary Item ID: JW-909632 injection pump.

Winch is good.

Contact: J Williams Recently came off thex701 job and is Ph: (888) 401-6367 field ready.

Item ID 13942. Austin x703 TIMBERJACK 380B SKIDDER Single arch skidder with a new 5.9 cummings motor, less than 200 hours. Rebuilt 4 speed power shift transmission. Good center pins. Winch has new brakes, good grapple. New inline bosch injection pump, makes 2500 the motor come ‘13 KMC Track alive. rear tires 60/70% front tires Skidder 20/30% Machine is field ready. 1 set of ice Item ID: chains 14078for an additional $1000.

Contact: Austin Item ID 13941.

Austin x703 Ph: (888) 401-6367 x703 2002 TIMBERJACK 460D This skidder is the same thing off onto a conveyor.

This is a very well built processor. Item ID 13820.

Sam x702

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot 372  Issue 364

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

13HP Honda motor. Manual start but electronic option is available.

Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens  since 1986

❘

as a 648GIII and is in excellent condition. New engine has about 4000 hours. Torque convertor transmission. 14 hole wheels. Tires are 30.5’s at 55% and one at 80%. Center has very little slack. This skidder has been a back up skidder for ‘93 Barko 180B the several years. Skidder has Item ID: 14077 12000 hours.

Contact: Item ID Austin 13805. Sam x702 Ph: (888) 401-6367 x703 1981 TIMBERJACK 520 Very hard to come by! 653 Detroit. Runs Great!

Item ID 13741. Sam x702 2002 TIMBERJACK 608S WITH HOT SAW Approx. 6000 hours, Machine is in very good shape and has ‘95 John Deere C6 been well maintained.

Item IDFarmer 12194. Sam x702 Tree

Item ID: 13920 ‘98 TIMBERJACK Contact: Austin 1270B 7,300 hrs.

Perkins 6 x703 Cylinder Ph: (888) 401-6367 Engine. All modules and computer are brand new. Tires on average are around 80% capacity!. Item ID 13421. Sam x702 Video: http://youtu.be/R_ BARKO MQZe5QEFw. 1994 Barko - Electric Item ID 160B 13572.

Chris x700 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 See original hours. us:

(excellent condition.). Item ID

Firewood Processor - This is

June 14-16 Forest Products Mach.

automatice firewood processor

1995 Barko 775 B Feller Buncher

Atlanta, GA

13238. Chris x700

a Chomper Model 16 PDA

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

One owner and comes with all

1999 Barko 160D - new engine with

manuals and receipts. Purchased

approximately 1500 hours. Hour

new for $32,500. Item ID 13865.

meter dont work. The last 2 owners

Sam x702 handling fans • Material

LOGGING EQUIPMENT • BANDIT

have only used it to load trucks or

500 to 58,500 CFM Pulse Jet Baghouse Filters (round & square) Centrifugal Cyclone collectors models 1900 Tracked Disc 199936Bandit Overhead Dust Storage Bins Chipper Under Carriage at (round-&Cat square) Flex-tip Rotary Airlocks -5 models

as a backup as needed. Has a CTR

• • • 50% or better. 475 hp Cummins • 8’-13’ Dia Storage Silos Diesel.

7500 Hours.

• Flanged welded pipe andOne elbowsowner.

• 26 to 16Ga galv. lock seam elbows Well maintained. Item pipe ID &13294.

• Sgl, Dbl & Triple trailor loadout systems

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Sam x702

Runs Great!. Item ID 13740. Sam

2004 Bandit Beast Model 4680 -

x702

3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

good condition. Just finished 10

BELL

1990 Bell Super T - This Bell has

Acre clearing job, ready to work! a brand new Duetz engine. Lever 4200 S 900 W • Topeka, IN 46571 www.honeyvillemetal.com

(800) 593-8377 • Fax (260) 593-2486 control, 33” bar, pump and tranny RemotePhone control.

Big production

 List  seLL  exchange  buy  save

❘

 Lumbermensmagazine.com

VALMET

1998 VALMET 603 3-WHEELED BUNCHER 6500 hours on total machine but no hours on 4BT3.9 Reman Cummins Engine. Equipped with 18” Waratah High Speed Disc Saw. 28L x 26 Tires at 40% complete with chains. This machine has been extremely The Tree well maintained and runs very that Started well. Hard to find them in this good of condition. it All! Has a twin that is available if you need two Since 1986, Lumbermens has units. published monthly circular Item ID a12524.

Sam x702 reaching sawmills, loggers, pallet makers, recyclers and 2005 VALMET 860.1 industrial woodworking plants 8-WHEELED FORWARDER worldwide.

17,800 hours. New hydraulic PUBLISHER transmission and gear box in Woods Publishing 2013. $70,000 of updates in 2012. ADVERTISING Bogies justSALES resealed.

Morris($7,000 Woods value) Spare pump (888) 401-6367 ext. 704 Good running condition. Sisu morris@lumbermens.co engine uses 4 gal/hour. 16 ton MARKETING DIRECTOR capacity.

One set of Mud Tracks.

John Williams Front blade. Hood guard.

(888) 401-6367 ext. 701 Itemj@lumbermens.co ID 12267. Sam x702

DESIGN DIRECTOR 2005 VALMET 941 Donna Heninger HARVESTER EQUIPMENThead REPSto toe!

Totally refurbished Sam Wall Very good running condition.

401-6367 ext. 702 Over (888) $50,000 in recent updates sam@lumbermens.co and maintenance. New center Austin Woods pin bushings; new bogey seals; (888) 401-6367 703 valves resealed; allext.cylinders austin@lumbermens.co packed. 10,200 hours. Largest MAILING ADDRESS Has of rubber tired harvesters.

P.O. Box 1916 Valmet 370.2 processing head Columbia, TN 38402-1916 with less than 4000 hours.

(888) 401-6367 Engine runs well. Tires at 50%.

SUBMISSIONS This is aADhard to find gem and May sent to­ priced belowbe market. morris@lumbermens.co Item ID 12569. Sam x702 POSTMASTER Send address changes to: 2005 VALMET/TIMBCO 415 Lumberman's Exchange HARVESTER WITH 370E P.O. Box 1916 HEAD Columbia, TN 38402 15,400 hours. 370E Harvesting The Lumberman's Exchange is has head just added in 2010 and published monthly by Woods 7000 hours. 36” Triple Grouser Publishing, P.O. Box 1916, tracks rebuilt one year ago and Columbia, TN 38402. All rights are at 80%.

Sisu engine that is reserved.

All editorial/ advertorial submissions at the8’ squirt very stingyareonused fuel. the publisher andreach. may atdiscretion end ofofboom for 30’ be edited for purposes of clarity Reversible fan and auxiliary oil and space. Although all efforts have cooler.

Still runs accuracy OK. Cutting been made to ensure of content submitted by advertisers today but will needs some basic and writers, the Lumberman's updates soon.

Exchange, its principles and Item ID 12266. Sam x702 associates, are not held liable for errors or omissions. Reproduction,

in whole or part, is prohibitedMODwith­ 2007 VALMET/KOMATSU out written consent.

EL 911 EXTREME HARVESTER Publishing Only 4000©2017 hoursWoods on this special

** CALENDAR**

machine. Has new Log Max 6000 added in 2013. Individual tracks on each hub allow this machine to climb where NO OTHER NY 700 STATE WOODSMEN'S FIELD DAYS MACHINE can go! 4 New tires and rims come with itFri, for18 August - Sun, 20 August rubber tired operation. Recently Boonville, New York www.starwebhosting.net/woodsmen/ gone through and updated.

Very unique and hard to find a SOUTHWEST FOREST PRODUCTS EXPO machine like this! Priced well Fri, 25 August - Sat, 26 August below market. Sold new without Hot Springs, Arkansas head in 2008 for $575,000! www.arkloggers.com Item ID 12571. Sam x702

72ND ANNUAL GREAT LAKES

1998 VALMET 603 FELLER LOGGING & HEAVY EQUIPMENT EXPO BUNCHER W/18” WARATAHThurs, 7 Sept - Sat, 9 Sept HOT SAW Escanaba, Michigan Just over 10,000 hours. New 28L x 26 tires - 20 ply. All oils just MID-ATLANTIC LOGGING & BIOMASS changed to synthetic oils. New Fri, 15 Sept - Sat, 16 Sept fuel filter. New radiator fluid— Selma, North Carolina flushed and replaced. Newwww.midatlantic-logging-biomass­ saw MID-ATLANTIC teeth on disc plus about 100 expo.com/ LOGGING & BIOMASS EXPO spare teeth. $15,000 in recent upgrades. FOB: Canada. NewKENTUCKY WOOD EXPO sensors. New batteries. AllFri, 15 Sept - Sat, 16 Sept hoses inspected and replaced Lexington, Kentucky as needed. New O-Ring seals http://www.kfia.org/ in valves. Cummins 4BT3.9KentuckyWoodExpo.aspx has 130HP and plenty of power. Owner states that it THE PAUL BUNYAN SHOW cuts perfectly. Totally ready for Fri, 6 Oct - Sun, 8 Oct work. Inspected and tested and Cambridge, Ohio woods ready. www.ohioforest.org Item ID 13503. Sam x702

** INFO LINK**

1997 VALMET 890 FORWARDER 8-Wheeled Forwarder. 18,400 hours. Hood guard. Runs well and 20 ton B & well B Mfgmaintained. . ...............................

18 capacity. Tires at 40%. Includes B. H. Payne .............................. 16 removable carry bin for biomass 5, 7 orBaker wood...................................... waste.

Item ID 13462.

Sam x702 Bell's Machining ..................... 27 TIMBERPRO Brute Force Mfg. ..................... 31

2005 TIMBERPRO 620 Buck Equipment (AIM) ........ 36 BOGEY GRAPPLE SKIDDER Very good running condition.

Corley Mfg .............................. 32 Big Capacity Grapple! 9400 CRD Metalworks 25 hours.

Tires at ....................

40%. Totally gone

by TP Dealer who CW through Mill-ArmorHog ..............

17 did the following: Repacked CW Mill-Hogzilla ................... 15 and resealed hydraulic cylinDyna 35 ders – Products grapple ........................ arch, steering; Replaced hydraulic hoses and Empire Hydraulics ................... 8 lines where needed – fill pump, Great Lakes . ....................

34 grapple, etc; Mfg Repacked hydraulicHahn fill pump; Replaced exhaust; Machinery ......................

3 Replaced center pins; StraightHurst Boiler 14 ened and ............................. painted panels; Changed all fluids and filters; Iron Bull ...................................

21 Re-insulated cab; Checked and Kilgore Saw ............................. 22 fixed wiring as needed.

Lignomat .................................

Item ID 13438.

Sam x702 24

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

M&F Gauge ............................. 28 Meadows Mill, Inc. ................ 33

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage,

Menominee Saw ..................... 29

sawyers cab, computer controls,

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Midwest Sharpening.............. 26

carriage knees, husk including

Morbark ..................................... 9 Multitek ................................... 12 Piper's Saw Shop.................... 13 Rotochopper............................ 40 Row Electric ............................ 20 Sawmill Exchange .................. 11

48" bottom saw and 36" top saw

STACKING RAC

Select Sawmill ......................... 19 Smith Sawmill ........................... 4 The Paul Bunyan Show ......... 39 Thomas Industrial Controls..... 10 Union Grove Saw & Knife.. 2, 37 Universal Refiner ................... 23 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 17

2007 TIMBERPRO $10,000.

Phone 810 COMBI MACHINE 315.284.4126 Item ID 13501. Sam x702 Forwarder set up but comes Fax 315.849.2045 with rebuilt Log Max 750Website 2010 TIMBERPRO 725B processing head. Less www.empirehyd.com than W/ROLLY II PROCESSOR 5200 totalUnder hours.

Runs info@empirehyd.com very Email Super Clean Machine. Runs “Precision Pressure” well. Has blade and plumbed great. Has worked double shifts for a clam bunk. New swing so it has higher hours at 13,500, gear box. Quick attach in but has been well maintained.

15 min. to switch head to New U/C last year. 24” grousers. grapple. Cummins 6.7 QSB All pumps rebuilt last year. Gull engine. 260HP. Optional wing engine cover with hydraulic Tracks on all bogies adds lift for easy maintenance. Rolly II

in good condition and computer measures well. Owner retiring.

Bought new for $540,000!

Item ID 13362. Sam x702 2006 TIMBERPRO 830 COMBI HARVESTER/FORWARDER Just 5700 hours. Very good condition. Comes with grapple ‘16loading Halverson for forwarderH140 and Log Max 7000 processing head for Skidsteer (DEMO) harvesting.

2 sets of tracks for Item ID: JW-909632 bogies.

Set up for quick change Contact: J Williams Ph: (888) 401-6367 x701

from harvester to grapple. One man operation. Log Max head has top saw and runs well.

Compare to new machine at $650,000.

Item ID 13439. Sam x702 PLANERS

2006 LOGOSOL PLANER ‘93 Barko 180B This is a 10” 4 sided planer that Item ID: 14077 has removable side cutters that Contact: Austin will take up to 12” lumber and Ph: (888) 401-6367 x703 includes a blower system.

Item ID 13428. Sam x702

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

capacity!. Item ID 13421. Sam x702

BARKO

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

‘83 John Deere 4850

chain conveyer, 8 way splitter, on

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

20,000lb goose neck trailer. Item ID 13916. Austin x703

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID

Firewood Processor - This is

‘05 Gehl CTL 70

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

13238. Chris x700

a Chomper Model 16 PDA

1995 Barko 775 B Feller Buncher

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

One owner and comes with all

1999 Barko 160D - new engine with

manuals and receipts. Purchased

approximately 1500 hours. Hour

new for $32,500. Item ID 13865.

ROW ELECTRICAL EQUIPMENT, INC. Best Value Portable Log Splitter

with 1700 hours, in very good

- Small manufacturer in PA has

condition. Easily produces high

made the best valued log splitter.

quality chips with patented ‘Cone’

Handles logs up to 32”. Uses

13HP Honda motor. Manual start

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

1999 Bandit 1900 Tracked Disc

• Squirrel CageisMotors Motors - Crane and Mill • Transformers, Three-Phase Item ID 13694.

Sam x702 but electronic option available. • DC 50% or better.

475 hp Cummins • Gear Speed Drives Starters 94 Barko Magnetic 275 - Excellent value Has Log Lift. Motors Uses 4-way wedge • Adjustable Diesel. 7500 Hours.

One owner.• Across/Line • Wound-Rotor - AC and Starters with Voltage low at hours at 3,500. 5.9 adjustable to single twoMotors way. Great• Generators Well maintained.

ItemDC ID 13294.• Reduced Synchronous Motors Sets • Safety Switchescontinuous grapple.

CUMMINS Value!• PA. Item ID 12062.

Sam x702• Engine-Generator Sam x702 • DCProcessor Motors - This is a • Transformers, Single Phase Convertors Runs Great!. Item ID 13740. Sam Firewood 2004 Bandit Beast Model 4680 - • Phase

vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

FIREWOOD PROCESSORS

LOGGING EQUIPMENT BANDIT

YOUR SOURCE FOR- Cat USED, RECONDITIONED: Boom cylinders have minor leaks.

Chipper Under Carriage at

drum design. Can easily load 42’

Item ID 13644. Sam x702

meter dont work. The last 2 owners

Sam x702

F

homemade processor with a 10’

:

x702

3412 Caterpillar Diesel engine

P.O. Box 2812 • Toledo, Ohio 43606

log to deck. Has a hydraulic grapple, ax

BELL 800-248-4479

with 850 HP. 5300 hrs. Mill in

2010 Shop Built Wood Processor chain and kicker WWW.RoWELECTRiCAL.CoM that all runs off good condition. Just finished 10 1990 Bell Super T - This Bell has 419-248-4479 rowelec@glasscity.net - It has a 353 Detroit diesel, 40 of a 4 cylinder Mercedes power Acre clearing job, ready to work! a brand new Duetz engine. Lever inch insert tooth circle saw, 30 foot Remote control. Big production control, 33” bar, pump and tranny unit. Has a 4’ chain saw that kicks WE ANSWER THE PHONE 24 HOURS • WE BUY USED ELECTRICAL

419-244-8887

372  Issue 364

Lumbermens  since 1986

❘

 List  seLL  exchange  buy  save

❘

 Lumbermensmagazine.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and Shavings Equipment industrial woodworking plants worldwide.

For Sale

Escanaba, Michigan

2015 Cat 525D MID-ATLANTIC LOGGING & BIOMASS Item ID: 14167 Fri, 15 Sept - Sat, 16 Sept

Two shavingsPUBLISHER machines manufactured

Woods Publishing

by Jackson Lumber 10” cutter headsADVERTISING 30” wide and hold 8 knives, SALES One custom built Morris Woods shavings machine Farley Machine works (888)by401-6367 ext. 704 8” xmorris@lumbermens.co 42” cutter heads 42” x 48” deep x 8’6” long log box 40hp MARKETING DIRECTOR three phase motor, a log transfer John Williams system, conveyors.

(888) 401-6367 ext. 701

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Contact: AUSTIN Selma, North Carolina Email: Austin@lumbermensco.com www.midatlantic-logging-biomass­ Phone: 888-401-6367 EXT 703 expo.com/

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept Lexington, 2012 CatKentucky D6K XL Item ID: 14169 http://www.kfia.org/ KentuckyWoodExpo.aspx

Contact: AUSTIN Email: Austin@lumbermensco.com THE PAUL BUNYAN SHOW Phone: 888-401-6367 EXT 703

j@lumbermens.co

Location: Mooreland, Oklahoma DESIGN DIRECTOR Contact: Ira Smith Heninger Phone: Donna 580-3346001

Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS Item ID: 14123

Austin Woods ext. 703new Less(888) than401-6367 8600 hours, austin@lumbermens.co rebuilt motor, new turbo!

May be sent to­ morris@lumbermens.co Contact: MARK

Email: Mark@lumbermensco.com POSTMASTER Phone: EXT 708 Send888-401-6367 address changes to:

702-875-2703 Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may PT20H Danzco be edited for purposesDelimber of clarity and space.

Although all efforts have Item ID: 14134 been made to ensure accuracy of Excellent condition, motor rebuilt about content submitted by advertisers andhours writers, Lumberman's 300 agotheless than 2700 original Exchange, its principles and hours associates, are not held liable for errors or omissions.

Contact: MARK Reproduction, Email: Mark@lumbermensco.com in whole or part, is prohibited with­ Phone: 888-401-6367 EXT 708 out written consent.

702-875-2703 ©2017 Woods Publishing

** INFO LINK** Item ID: 14111

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 B & B Mfg. ............................... 18 M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29 Item ID: 14133

'80 980C CAT Loader

All maintenance records tight machine 980C cat30 loadDetector's Inc1980 . ..............

Bell's Machining .....................

27 Metal er forks and a bucket tires 60-70% spare parts included.

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13 '06 John Deere 748G3

Contact: MARK Email: Buck Equipment (AIM) ........

36 Mark@lumbermensco.com Morbark ..................................... 9 Phone: 888-401-6367 EXT 708

702-875-2703 Corley Mfg .............................. 32 Multitek ................................... 12

CW Mill-ArmorHog .............. 17

Rotochopper 40 Item ID:............................

14131

70% around, maintenance done CW Mill-Hogzilla ...................

15 rubber Row all Electric ............................

20 about every 200 hours

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Contact: MARK Email: Empire Hydraulics ...................

8 Mark@lumbermensco.com Select Sawmill ......................... 19 Phone: 888-401-6367 EXT 708

702-875-2703

Paul Bunyan Show ......... 39 03’The Woodmizer LT-300 Hurst Boiler ............................. 14 Thomas Industrial Controls..... 10 Operation

Hahn Machinery ...................... 3 Iron Bull ................................... 21

Item ID: 14171 Union Grove Saw & Knife.. 2, 37

Kilgore Saw .............................

22 Universal Contact: AUSTIN Refiner ................... 23

Email: Lignomat .................................

24 Austin@lumbermensco.com WoodMizer ................................ l Phone: 888-401-6367 EXT 703

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers

that go up and down,Log with airbags, Export it includes two sets of Mcdonough Debarking Line

pressure guides. Top Casting wheel

Reconditioned is supported on both sides.35 This

Nicholson A-5 is an extremely accurate machine debarker, cab, infeed in ve1y good condition, Cuts 130

glass rolls, log feet hour a minute also has CLT presses.

dischage Item ID 13876. belt Austinwith x703

S & W 125log Bandkickers Mill with

side

Caterpillar - Low hours Callgenerator for details on the mill, electronic computer Set

Phone: works,1 1/2"208-451-0365 or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

'95 GMC Topkick

with onboard Itemlog ID:turners, 14122 carriage drive, hyd pac for carriage,

92000 miles. 366 gas engine. 5 speed 2 speed

rear end Tires good Runs controls, and drives like sawyers cab,are computer

it's supposed to. No issues Dump hoist two

cabinet with electronic drives for years old was 5k. 14' dump bed.

carriage knees, husk including Contact: MARK 48" bottom saw and 36" top saw Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

STACKING RAC 2004 Timbco 445EXL Item ID: 14170

85% Undercarriage.

Contact: AUSTIN Email: Austin@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 703 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 19

B U Y S

ADDRESS Radio,MAILING AC, Heat.

FD22 head, 1916 2 brand P.O. newBox tires, two 60% Columbia, TN turbo.

38402-1916 or better.

New Oil pin (888) 401-6367 gasket has a small leak. Great ADready SUBMISSIONS machine to work!

90's Model Timberjack 240A

BANDMILLS & HEADSAWS

H O T

Sam Wall 401-6367 ext.843H 702 '06(888) John Deere sam@lumbermens.co

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

“Precision Under Pressure”

'03 670 Hydro-Ax

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Item ID: 14138

2nd owner around 8000 hours, call for more info Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

234B Tigercat Loader

Item ID: 14139 Skidsteer (DEMO)

Big 56" Grapple, less than 600 hours!

Great machine!!

Under 300Item hrs 65ID: hp John Deere diesel engine JW-909632 sheers the log no sawdust

Contact: J Williams

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

Contact: MARK Ph: (888) 401-6367 Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

x701

Item ID: 14143

Item ID: 14142

13k hours body, new motor about 1000 hrs, transmission rebuilt about 300 hrs, few minor leaks, tight pins, new turbo, new radiator, receipts for motor and trans. Great machine ready to work!

Knuckle Boom Log Loader

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703

‘13 KMC 2500 Track Timberjack 207 Skidder Item ID: 14144

off onto a conveyor. This is a very Sam x702

grapple, 5,000 original hours.

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703

702-875-2703

BEST LESS

well built processor. Item ID 13820.

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot 372  Issue 364

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens  since 1986

❘

good. in good working order. 22in kohing head. head works great.

approximately 1500 hours. Hour

new for $32,500. Item ID 13865.

meter dont work. The last 2 owners

LOGGING EQUIPMENT BANDIT

50% or better. 475 hp Cummins

on injection pump. always started

1999 Barko 160D - new engine with

manuals and receipts. Purchased

but electronic option is available.

- Pumps recently redone. 400 hrs

Item ID 13185. Sam x702

One owner and comes with all

1999 Bandit 1900 Tracked Disc

Has Log Lift. Uses 4-way wedge

1995 Barko 775 B Feller Buncher

automatice firewood processor

Handles logs up to 32”. Uses

13HP Honda motor. Manual start

13238. Chris x700

a Chomper Model 16 PDA

Sam x702

motor, Rotobec continuous

(excellent condition.). Item ID

Firewood Processor - This is

‘05 Gehl CTL 70

'98ID: International Item 13920 Chipper Contact: AustinTruck Item ID: 14140x703 Ph: (888) 401-6367

164k miles can haul 15 cubic yards, 12' long, small stash compartment, very well kept truck capacity!. Item ID 13421. Sam x702 Contact: MARK BARKO Email: Mark@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 708

702-875-2703 knuckleboom, 30' boom, 75hp

Item ID: 14078 Out of frame rebuilt engine, out of frame rebuilt Austin transmission,Contact: rebuilt reverse box. Runs great, paper work documentingPh: all work done.401-6367 x703 (888)

Contact: MARK 13428 Victory Ln. // PO Box 124 Email: Mark@lumbermensco.com Adams Center, NY 13606 Phone: 888-401-6367 EXT 708

‘95 John Deere C6 Tree Farmer

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Chipper - Cat Under Carriage at

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

Diesel. 7500 Hours. One owner.

with low at hours at 3,500. 5.9

Well maintained. Item ID 13294.

CUMMINS continuous grapple.

Sam x702

Runs Great!. Item ID 13740. Sam

2004 Bandit Beast Model 4680 -

x702

3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 Lumbermensmagazine.com

B U Y S

'93 John Deere 540E

'08 John Deere 437C

‘83 John Deere 4850

ItemhrsID: 14077 12600 cummings 6vt 5.9 8 wheel double diamond kingsAustin one set brand new, 6' exContact: tender boom works great lights ac heat radio, Ph: (888) 401-6367 x703 tight 2 double bunks really nice blade.

H O T

‘16 Firewood Halverson H140 Chomper Processor

Item ID: 14135

'00 Timberjack 1110B

Item ID:180B 14141 ‘93 Barko

** CALENDAR** ‘04 Fabtek 344B Item ID: JW-093430

SAM NYContact: STATE WOODSMEN'S FIELD DAYS Email: Sam@lumbermensco.com Fri, 18 August Sun, 20 August Phone: 888-401-6367 EXT 702

Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Doosan Fri, 25 ‘11 August - Sat, DL200 26 August

‘04 Transport Trailers The Tree Custom Lowboy Pup that Item ID: Started JW-952962

published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Morris Woods

LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

feed deck 20 foot out feed deck Contact: AUSTIN Email: Austin@lumbermensco.com with 44 inch wheels, and all the Phone: 888-401-6367 EXT 703 bells and whistles, its a production

‘05 Transport Trailers Custom Log Pup MID-ATLANTIC LOGGING & BIOMASS Item ID: JW-538174 Fri, 15 Sept - Sat, 16 Sept

Woods Publishing

ADVERTISING SALES

Item ID: 14110 10 hours on this machine since it Currently has 3316 has been rebuilt, it hashours. a 24foot in

Escanaba, Michigan

PUBLISHER

MID-ATLANTIC

LOGGING & BIOMASS EXPO

'94 CAT 518 (888) 401-6367 ext. 704 Grapple Winch morris@lumbermens.co

Contact: SAM North Carolina Selma, Email: Sam@lumbermensco.com www.midatlantic-logging-biomass­ Phone: 888-401-6367 EXT 7021 expo.com/

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Item ID: 14107

12k hoursJohn runs Williams great tight center (888) section 401-6367 ext. 701

HardKentuckyWoodExpo.aspx to Find “C” model in great shape!

Contact: SAM DESIGN DIRECTOR Email: Sam@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 702

Contact: AUSTIN THE PAUL BUNYAN SHOW Email: Austin@lumbermensco.com Fri, 6 Oct - Sun, 8 703 Oct Phone: 888-401-6367 EXT

http://www.kfia.org/

j@lumbermens.co

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

‘16AD Halverson H140 SUBMISSIONS Skidsteer (DEMO) May be sent to­

morris@lumbermens.co Item ID: JW-192810

POSTMASTER Contact: SAM Send address changes to: Email: Sam@lumbermensco.com Lumberman's Exchange Phone: 888-401-6367 EXT 702 P.O. Box 1916 Columbia, TN 38402

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers 532 CAT Feller and writers, the Lumberman's Buncher Exchange, its principles and Item ID:held 14079 associates, are not liable for errors or omissions. Reproduction, Contact: AUSTIN in whole or part, is prohibited with­ Email: Austin@lumbermensco.com out written consent.

Phone: 888-401-6367 703 ©2017 WoodsEXT Publishing

'97 CAT 525 Original Cable Skidder Item ID: 9901

** INFO LINK**

One Of A Kind. Has Never Pulled A Log. Owned By An Electric Company. Deal!

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 B & B Mfg. ...............................

18 M&F Gauge .............................

28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Item ID: 7098 Menominee Saw ..................... 29

D5H TSK

Metal Detector's . ..............Very 30 Bell's Machining .....................

27 Hours, LOW Excellent Inc Condition, Hard To Find Dozer.

Brute Force Mfg. ..................... 31 Midwest Sharpening.............. 26 Contact: SAM Buck Equipment (AIM) ........

36 Mor bark ..................................... 9 Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 Corley Mfg .............................. 32 Multitek ...................................

12 CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

Rotochopper 40 CW Mill-ArmorHog ..............

'0917John Deere ............................

753J Buncher Item ID: 14106 CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 Contact: AUSTINExchange .................. 11 Dyna Products ........................

35 Sawmill Email: Austin@lumbermensco.com Empire Hydraulics ...................

8 888-401-6367 Select SawmillEXT .........................

19 Phone: 703

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Paul Bunyan Show ......... 39 '13The John Deere 548G III

Hahn Machinery ...................... 3 Hurst Boiler ............................. 14

Item ID: 8789 Thomas Industrial Controls..... 10

Iron Bull ...................................

21Hours, Union Grove Saw & Knife.. 2, 37 5600 23.1 Tires.

Kilgore Saw .............................

22 Universal Refiner ................... 23 Contact: SAM

Email: Lignomat .................................

24 Sam@lumbermensco.com WoodMizer ................................ l Phone: 888-401-6367 EXT 702

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

'01 John Deere 648G3

Item ID 13876. x703 ItemAustin ID: 90899

S & W 125 Band Mill with Excellent Condition Low Price!

Caterpillar generator - Low hours Contact: on the mill,SAM electronic computer Set Email: Sam@lumbermensco.com works,1 1/2" or 2" band,EXT 22ft.702 track Phone: 888-401-6367 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage

01’ Ponsee Bison Forwarder

drive, hyd pac for carriage,

sawyers cab, computer controls, Item ID: 14109 cabinet with electronic drives for Comes with a set of tracks. carriage knees, husk including Contact: 48" bottomAUSTIN saw and 36" top saw Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

STACKING RAC '97 CAT D4H TSK Item ID: 9987

8K Original Hours. Serviced By CAT. Ready To Go! Contact: SAM Email: Sam@lumbermensco.com www.BakerProducts.net 800.S48.6914 I S73.663.7711 Phone: 888-401-6367 EXT 702 ❘ L!  (888) 401-MENS 401-MENS

NO. 21

L O G G I N G

'92 CAT 518C Cable Skidder Lexington, Kentucky

Item ID: 99807

BANDMILLS & HEADSAWS

90’ CAT 213 Excavator Danckaert Band Resaw - Roughly

HotItem Springs, Arkansas ID: JW-113876 www.arkloggers.com

Contact: SAM Email: Sam@lumbermensco.com 72ND888-401-6367 ANNUAL GREAT LAKES Phone: EXT 702

Contact: SAMit All! Email: Sam@lumbermensco.com Since 1986, Lumbermens has Phone: 888-401-6367 EXT 702

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘08 John Deere 648H Item ID: 14074

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Cat 525

CAT D6C

Item ID:180B 14152 ‘93 Barko

‘16 Halverson H140

Item ID: 14155

Item 14077 1972 Cat ID: D6C good winch with arch, straight blade, around 10k hours turns fine undercarContact: Austin riage 50-60% good rollers, cab all screened, Ph: (888) 401-6367 x703 tilt blade complete logging setup.

Phone: 888-401-6367 EXT 7031

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

Item ID: JW-578870

Item ID: JW-909632 Contact:Contact: AUSTIN J Williams Email: Austin@lumbermensco.com Ph: (888) 401-6367 x701

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

‘00 Timbco 445D Item ID: 14096

‘95 John Deere C6 Tree Farmer

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘13 KMC 2500 Track Skidder Prentice 384

77 General Log Trailer Item ID: 14153

Item 14156 Item ID:ID: 14078 Austin Contact:Contact: MARK Ph: (888) 401-6367 x703 Email: Mark@lumbermensco.com

77 General Log Trailer with parts Victory // info.

PO Box 124 and 13428 extras. Call for Ln. more Adams Center, NY 13606 Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

Phone: 888-401-6367 EXT 708

702-875-2703 off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot 372  Issue 364

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens  since 1986

❘

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

1999 Barko 160D - new engine with

manuals and receipts. Purchased

approximately 1500 hours. Hour

new for $32,500. Item ID 13865.

meter dont work. The last 2 owners

Sam x702

LOGGING EQUIPMENT BANDIT

50% or better. 475 hp Cummins

Has Log Lift. Uses 4-way wedge

grapple, 5,000 original hours.

Item ID 13185. Sam x702

One owner and comes with all

but electronic option is available.

13HP Honda motor. Manual start

motor, Rotobec continuous

1995 Barko 775 B Feller Buncher

automatice firewood processor

1999 Bandit 1900 Tracked Disc

capacity!. Item ID 13421. Sam x702 Contact: MARK BARKO Email: Mark@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 708

702-875-2703 knuckleboom, 30' boom, 75hp

13238. Chris x700

a Chomper Model 16 PDA

Handles logs up to 32”. Uses

winch 28L tires brand new. Frame has about 10k hours. Engine is completely rebuilt with zero hours.

(excellent condition.). Item ID

Firewood Processor - This is

‘05 Gehl CTL 70

CAT 640D Item '90 ID: 13920 Contact: Austin Item ID: 14157 Ph: (888) 401-6367 x703 1990 John Deere 640D cable skidder with big

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Chipper - Cat Under Carriage at

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

Diesel. 7500 Hours. One owner.

with low at hours at 3,500. 5.9

Well maintained. Item ID 13294.

CUMMINS continuous grapple.

Sam x702

Runs Great!. Item ID 13740. Sam

2004 Bandit Beast Model 4680 -

x702

3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 Lumbermensmagazine.com

L O G G I N G

Cat 525 3304 engine, tires 65%, 13929 hours brand new hydraulic pump.

‘14 JRB Quick Attachement Grapple Skidsteer (DEMO)

** CALENDAR**

‘16 Halverson H140 Skidsteer Item ID: JW-192810

NYContact: STATE AUSTIN WOODSMEN'S FIELD DAYS Email: Austin@lumbermensco.com Fri, 18 August - Sun, 20 August Phone: 888-401-6367 EXT 703 Boonville, New York www.starwebhosting.net/woodsmen/

'97 Hydro AX-411 EX Bar Saw Head Item ID: 98754

SOUTHWEST FOREST PRODUCTS '01 Gyro Tract GT13 EXPO Item -ID: 14116 Fri, 25 August Sat, 26 August

Heat works.

Air needs The Treecharging.

Tires inc., great shape tires Started chains tothat go with it bear claws.

Hot Springs, Arkansas Comes www.arkloggers.com with Miller Stump Grinder.

it All!

Contact: AUSTIN 72ND ANNUAL GREAT LAKES Email: Austin@lumbermensco.com LOGGING & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 703

Contact: SAM Email: Sam@lumbermensco.com Since 1986, Lumbermens has Phone: 888-401-6367 EXT 702 published a monthly circular

Thurs, 7 Sept - Sat, 9 Sept

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

Prentice 490 MID-ATLANTIC‘02 LOGGING & BIOMASS Item ID: 14047 Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ ‘00 Timberjack 1110

morris@lumbermens.co Item ID: 14033

POSTMASTER Contact: AUSTIN Send address changes to: Email: Austin@lumbermensco.com Lumberman's Exchange Phone: 888-401-6367 EXT 703 P.O. Box 1916 Columbia, TN 38402

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have 540Bof beenJohn made toDeere ensure accuracy Item ID: content submitted by0908 advertisers and writers, the Lumberman's All Refurbished!

4K Original Exchange, its principles and Hours! associates, are not held liable for errors or omissions. Reproduction, Contact: in whole orSAM part, is prohibited with­ Email: Sam@lumbermensco.com out written consent.

Phone: 888-401-6367 702 ©2017 Woods EXT Publishing

machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine

S & W 125Brute Band Mill with 335XL Item ID: 14088 Caterpillar generator - Low hours

Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org

John Deere Cab Item ID: 6679

** INFO LINK**

AC, FD 55 Cutting Head, 70% Tires Very Good Condition, 3500 Hours.

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 B & B Mfg. ...............................

18 M&F Gauge .............................

28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

John Deere 540D

Item ID: 5613 Saw ..................... 29 Baker ...................................... 5, 7 Menominee 17,000 lbs, 100 HP, New Firestone . ..............23 30 x Bell's Machining ..................... 27 Metal Detector's Inc 126, Power Shift New Hyd Pump, New Winch NewSharpening Hyd Park Brake.

Brute Force Mfg. .....................

31 Shaft, Midwest .............. 26 Contact: SAM Buck Equipment (AIM) ........

36 Mor bark ..................................... 9 Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 Corley Mfg .............................. 32 Multitek ...................................

12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Item ID: 8834 Rotochopper ............................

40

John Deere 437D Log Loader

Product No. 4204, Extra Clean, 10K 20 CW Mill-Hogzilla ...................

15 Row Electric ............................

Hours, Stock Photo Delimber Dyna Products ........................ 35 Sawmill Exchange .................. 11 Contact: SAM Empire Hydraulics ...................

8 Sam@lumbermensco.com Select Sawmill ......................... 19 Email: Phone: 888-401-6367 EXT 702 Great Lakes Mfg. .................... 34 Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler .............................

14 ‘14

Thomas Industrial Controls ..... 10 Komatsu WA200 Loader

Item ID: 14010 Iron Bull ................................... 21 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Kilgore Saw .............................

22 Austin@lumbermensco.com Universal Refiner ................... 23 Email: Phone: 888-401-6367 EXT 703 Lignomat .................................

24 WoodMizer ................................ l

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

feed deck 20 foot out feed deck Contact: AUSTIN Email: with 44Austin@lumbermensco.com inch wheels, and all the Phone: 888-401-6367 EXT 703 bells and whistles, its a production

http://www.kfia.org/ Item ID: 14039 KentuckyWoodExpo.aspx

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

10 hoursAttachment on this machine since it Item ID: 14113 has been rebuilt, it has a 24foot in

in ve1y good condition, Cuts 130

Contact: AUSTIN Email: Austin@lumbermensco.com THE888-401-6367 PAUL BUNYAN SHOW Phone: EXT 703

Contact: AUSTIN DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 703

Danckaert Resaw - Roughly Land Band Pride Grapple

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

Lexington, Kentucky ‘89 Timberjack 380A

John Williams 518(888) CAT401-6367 Grappleext.

Skidder 701 Item ID: 14036 j@lumbermens.co

BANDMILLS & HEADSAWS

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

feet a minute also has CLT presses.

Item ID 13876. Austin x703

Mid 90’s Husky

on the mill,AUSTIN electronic computer Set Contact: Email: Austin@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

Caterpillar

with onboard log turners, Item ID: 2476 carriage

drive, hyd pac for carriage, Product no. 4194, Cab with cold AC, sawyers cab, computer controls, SH56 Bunching Head, 28L-26 Tires At 60%, Center Tight, Runs Great, Machine cabinet with electronic drives for Has New Injectors, New Fan Motors, carriage knees, husk including And Clutch On AC, 11,111 Hours.

48" bottomSAM saw and 36" top saw Contact: Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

STACKING RAC

‘16 JRB Quick Disconnect Log Grapple Item ID: JW-388974

Contact: AUSTIN Email: Austin@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 703 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 23

L O G G I N G

MARKETING DIRECTOR

Contact: AUSTIN Selma, North Carolina Email: Austin@lumbermensco.com www.midatlantic-logging-biomass­ Phone: 888-401-6367 EXT 703 expo.com/

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

“Precision Under Pressure”

Case 85XT Skid Steer

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Item ID: 14149

Open Cab, Top Fork And Bucket Attachments.

95% Front Tires 60-70% Rear Tires.

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703

'13 Komatsu WA200 PZ Wheel Loader

'96 410D Prentice ‘16 Knuckle Boom H140 Halverson

Item ID: 14146

Item ID: 14151

Turntable is real loose, needs bearings and hydraulic is seized up, ID: JW-909632 6 cylinder John Deere diesel. parts Item or fixer.

Parts in good shape!

Contact: J Williams Contact: MARK Ph: (888) 401-6367 x701

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

Item ID: 14077 motor runs excellent, Contact: Austin comes with 40% chains, used just a couple months ago to cut trees.

10-12k hours, frontx703 tires 60-70% Ph: (888) 401-6367

rear 90% turbo is lagging. Harvesting head is messed up. A couple leaks not too serious Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703

'15 CAT 521B Reduced Price

'05 John Deere 643 Item ID: 14147

Item ID: 14150

‘95 John Deere C6 Tree Farmer

Less than 300 hours of use! Brand new. Tracks at 99% excellent track cutter.

Shear head 20" saw around 10,000hrs, front tires new/95%, rear 50% 28x26, ac/radio/ heat work, Tight, great center, excellent machine!

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

‘13 KMC 2500 Track '72 CAT D6C Skidder

'80 Clark Skidder

Item ID: 14152

Item ID: 14177

Item ID: 14078

13428 Victory Ln. // PO Box 124 Contact: MARK Adams Center, NY 13606 Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

Good winch with arch, straight blade, around 10k Austin hours turnsContact: fine undercarriage 50-60% good rollers, cab all screened, tilt blade complete logging setup

353 Detroit, 80% comes with chains, capacity!.

Item ID 13421. tight dry machine, woodsSam ready!x702

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703

Phone: 888-401-6367 EXT 708 1994 Barko 160B - Electric

Ph: (888) 401-6367 x703

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

702-875-2703

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID

Firewood Processor - This is

‘05 Gehl CTL 70

BARKO

Contact: MARK Email: Mark@lumbermensco.com

13238. Chris x700

a Chomper Model 16 PDA

1995 Barko 775 B Feller Buncher

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in tach, oil pressure, water temp and ‘83 John Deere Hurst offers a full line of biomass fi red combustion systems backed kohing head. head works great. amp gauges. Cuts logs up to 16”.

Innovative 4850 with fifty years of innovative clean-burn design. Diverse in every way

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

chain conveyer, 8 way splitter, on

Item ID 13185. Sam x702 One owner and comes with all Clean-Burn Design

quality chips with patented ‘Cone’

with multi-fuel blending capability. Hurst manuals and receipts. Purchased stokers utilize hundreds of common 13916. Austin andx703 abundant solid biomass new fuels.for $32,500. Item ID 13865.

Best Value Portable Log Sam x702 Large orSplitter small scale, project management is eased with theLOGGING EQUIPMENT - Small manufacturer in PA has impressively short installation BANDIT made the best valued log splitter. time required with prefabricated Handles logs up to 32”.modular Uses components.

1999 Bandit 1900 Tracked Disc

vans and produce 6 - 8 loads per

but electronic option is available.

with 1700 hours, in very good

condition. Easily produces high

drum design. Can easily load 42’ day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot 372  Issue 364

20,000lb goose neck trailer. Item ID

Value! PA. Item ID 12062. Sam x702

Chipper - Cat Under Carriage at Rotary Dryers 50% or better. 475 hpSand Cummins Dryers Dryers Diesel. 7500 Hours. Grain One owner.

Lumber Kilns Well maintained. Item ID 13294.

Cement Kilns Sam x702 Brick Kilns

homemade processor with a 10’

3412 Caterpillar Diesel engine

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great Firewood Processor - This is a

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens  since 1986

❘

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam

2004 Bandit Beast Model 4680 -

x702

with 850 HP. 5300 hrs. Mill in

50

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Y EA RS

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 Lumbermensmagazine.com

L O G G I N G

Skidsteer (DEMO)

Item ID: 14145

Excellent Condition. One owner machine comes with a bucket and forks currently has around 3000 hours.

Valmet 544H ‘93'90 Barko 180B

** CALENDAR** Item ID: 0998

One Owner, With Less Than 4K Hours. Excellent Undercarriage, Joystick Controls. Everything Working OnWOODSMEN'S It. Best Bell For TheFIELD Price. DAYS NY STATE

Fri, 18 SAM August - Sun, 20 August Contact: Email: Sam@lumbermensco.com Boonville, New York Phone: 888-401-6367 EXT 702 www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO '96 CAT 515 Log Skidder Item-ID: 7534 Fri, 25 August Sat, 26 August

‘13 Komatsu WA200PZ The Tree Loader

Hot Springs, REDUCED PRICE! Single Arkansas Arch Glass Cab, 28L X 26 Tires 50/40%, New Bear Paws On Front, Ice Chains www.arkloggers.com Rear, Esco 84’ Grapple, New Cutting Edge On Blade, All Cylinders Just Rebuilt, 12,800 Hrs.

thatID: Started Item 14009 it All!

Contact: AUSTIN Email: Austin@lumbermensco.com Since 1986, Lumbermens has Phone: 888-401-6367 EXT 703

72ND ANNUAL GREAT LAKES

Contact: SAM • Email: Sam@lumbermensco.com LOGGING & HEAVY EXT EQUIPMENT EXPO Phone: 888-401-6367 702

published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

'07 John Deere 848H Grapple Skidder Item ID: 6566

MID-ATLANTIC LOGGING & BIOMASS Product No. Sept 1876, -11,066 Hours, New Fri, 15 Sat, Frame 16 Sept Engine At 8,800 Hours, Dual Arch Winch, Chains

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Selma, On All Four Tires,North WorkingCarolina Daily In Woods. www.midatlantic-logging-biomass­ Contact: SAM expo.com/ Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 '93 CAT 518C (888) 401-6367

Item ID: 4300

AD SUBMISSIONS

Luftkin Winch hard find May be senttoto­ Skidder! morris@lumbermens.co Contact: POSTMASTER SAM Send address changes to: Email: Sam@lumbermensco.com Lumberman's Exchange Phone: 888-401-6367 EXT 702 P.O. Box 1916 Columbia, TN 38402

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity 2005 Q70 andFranklin space. Although all efforts have Item ID: 5579 been made to ensure accuracy of content submitted by advertisers Low Hours!the New Rubber, Heat/ and writers, Lumberman's AC Takes No Oil. Great Running Exchange, its principles and Skidder. associates, are not held liable for errors or omissions. Reproduction, Contact: in whole orSAM part, is prohibited with­ out written consent.

Email: Sam@lumbermensco.com Phone: 888-401-6367 702 ©2017 Woods EXT Publishing

machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine

S&W Band Mill with ‘05125 Timberjack 608B Item ID: 13898 Caterpillar generator - Low hours

Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org

'94 CAT 518C Cable Skidder Item ID: 7698

** INFO LINK**

Product No. 1707, 3304 CAT Engine 1-1/2 Years Old, New Oil Cooler, Rebuilt Radiator, New Injector Pump, New Hydraulic Pump, New Main Lines, New Arch, New Blade Plate, Good Air Brakes.

Contact: SAM • Email: Sam@lumbermensco.com Phone:18 888-401-6367 EXT 702 B & B Mfg. ...............................

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29 Item ID: 2468

CAT 521B

Metal Inc.Basically .............. 30 Bell's Machining .....................

27than Less 300Detector's hours of use! brand new, trac, Excellent Track Cutter.

Brute Force Mfg. ..................... 31 Midwest Sharpening.............. 26 Contact: MARK Buck Equipment (AIM) ........

36 Mark@lumbermensco.com Morbark ..................................... 9 Email: Phone: 888-401-6367 EXT 708 Corley Mfg .............................. 32 Multitek ...................................

12 CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper 40 Item ID:............................

14111

99’ Timberland T-700 w/70ft Reach

CW Mill-Hogzilla ................... ............................

20 Will15sell Row with Electric or without boom.

Dyna Products ........................ 35 Sawmill Exchange .................. 11 Contact: AUSTIN Empire Hydraulics ...................

8 Austin@lumbermensco.com Select Sawmill ......................... 19 Email: Phone: 888-401-6367 EXT 703 Great Lakes Mfg. .................... 34 Smith Sawmill ........................... 4 Hahn Machinery ...................... 3

feet a minute also has CLT presses.

Item ID 13876. Austin x703

Contact: on the mill,SAM electronic computer Set Email: Sam@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 702 Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls,

‘06electronic CAT 517 cabinet with drives for Item ID: 13869 carriage knees, husk including Contact: 48" bottomSAM saw and 36" top saw Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

STACKING RAC

The Paul Bunyan Show ......... 39

Thomas Industrial425D Controls..... 10 ‘97 Timbco Item ID: 13950 Iron Bull ................................... 21 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Kilgore Saw .............................

22 Austin@lumbermensco.com Universal Refiner ................... 23 Email: Phone: 888-401-6367 EXT 703 Lignomat .................................

24 WoodMizer ................................ l

Hurst Boiler ............................. 14

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

feed deck 20 foot out feed deck Contact: AUSTIN Email: Austin@lumbermensco.com with 44 inch wheels, and all the Phone: 888-401-6367 EXT 703 bells and whistles, its a production

http://www.kfia.org/ Item ID: 13838 KentuckyWoodExpo.aspx

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

10 hours this machine since it ‘80on John Deere 550 Item ID: 14037 has been rebuilt, it has a 24foot in

in ve1y good condition, Cuts 130

Contact: SAM Email: Sam@lumbermensco.com THE PAUL BUNYAN SHOW Phone: 888-401-6367 EXT 702

Contact: AUSTIN DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 703

Danckaert Band Resaw - Roughly

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

Kentucky ‘14Lexington, B66TD Rotochopper

(888) 401-6367 ext. 701 Item ID: 14114 j@lumbermens.co

BANDMILLS & HEADSAWS

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

‘00 W900 KW w/Rotobec MT27 Heavy Spec Item ID: 13993

Contact: AUSTIN Email: Austin@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 703 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 25

L O G G I N G

MARKETING DIRECTOR Anna Grapple Skid Williams SteerJohn Attachment

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

“Precision Under Pressure”

Prentice 384

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Item ID: 14156

Call for more info!

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703

650J Dozer

Item ID: 14155

31-16 cat engine very tight replaced pins and bearings Item ID:machine JW-909632 CTR bucksaw never had a delimber on it. Very tight turntable.

Woods ready, Contact: call for more info!J Williams

3304 engine, tires 65%, 13929 hours brand new hydraulic pump

Ph: (888) 401-6367 x701

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703

Enclosed heat/air 2002 around 11300 hours, rebuilt rear end, redone ac system, replaced winch cable 2 months ago, center pins are tight, well serviced every 300 hrs. replaced all return lines for fuel, engine rebuilt at 4500 hours. Woods ready!

Nice tight machine, good winch, good motor.

Call for more info

capacity!.

Item ID Call 13421. logs last weekend. for Sam morex702 info

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703

1994 Barko 160B - Electric Phone: 888-401-6367 EXT 708

well built processor. Item ID 13820.

Sam x702

‘05 Gehl CTL 70

vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot 372  Issue 364

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens  since 1986

❘

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

meter dont work. The last 2 owners

Sam x702

LOGGING EQUIPMENT BANDIT230B ‘05 Tigercat

have only used it to load trucks or

as a backup as needed.

Has a CTR ‘97 Prentice 210E

delimber, grapple has been rebuilt.

Item# 13795

1999 Bandit 1900 Tracked Disc

Contact: Samhave minor leaks.

Boom cylinders

20

Ite Co Ph

Ph: ID (888) 401-6367 Item 13694.

Sam x702x702

94 Barko 275 - Excellent value 2006 Logosol Planer - This is a 10” with low at hours at 3,500. 5.9 4 sided planer that has removable CUMMINS continuous grapple. side cutters that will take up to Runs Great!. Item ID 13740. Sam 12” lumber and includes a blower x702 system. Item ID 13428. Sam x702

Diesel. 7500 Hours. One owner.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine

BELL POLE & POST PEELERS

with 850 HP. 5300 hrs. Mill in

good condition. Just finished 10

1990 Bell Super T - This Bell has PS8 Post Peeler - This peeler has a brand new Duetz engine. Lever been converted to electricity over control, 33” bar, pump and tranny hydraulic. Comes with a operators

‘99 Hydro-Ax Remote control. Big production 511EX

Acre clearing job, ready to work!

Contact: Sam Ph: (888) 401-6367 x702

grapple, 5,000 original hours.

approximately 1500 hours. Hour

new for $32,500. Item ID 13865.

Item ID: 13799  List  seLL  exchange  buy  save

motor, Rotobec continuous

1999 Barko 160D - new engine with

manuals and receipts. Purchased

Well maintained. Item ID 13294.

Value! PA. Item ID 12062. Sam x702

702-875-2703

Item ID 13185. Sam x702

One owner and comes with all

adjustable to single two way. Great

Has Log Lift. Uses 4-way wedge

knuckleboom, 30' boom, 75hp

1995 Barko 775 B Feller Buncher

automatice firewood processor

but electronic option is available.

13HP Honda motor. Manual start

BARKO

Contact: MARK Email: Mark@lumbermensco.com

13238. Chris x700

a Chomper Model 16 PDA

Item ID: 13911 Chipper - CatAustin Under Carriage at Contact: 50% better.401-6367 475 hp Cummins Ph:or(888) x703

Good winch, brand new batteries, pulled

(excellent condition.). Item ID

Firewood Processor - This is

drum design. Can easily load 42’

Item ID: 14179

Item ID: 14078

new motor around 200 hours, rebuilt transmission around 500Contact: hours, withAustin bucket and forks, quick attach setup, all cylinders redone last summer, fully Ph: (888) 401-6367 x703 enclosed cab

off onto a conveyor. This is a very

quality chips with patented ‘Cone’

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703 John Deere 648G

‘13 KMC 2500 Track Case W 11 Wheel Loader Skidder Item ID: 14178

702-875-2703

condition. Easily produces high

‘95 John Deere C6 Tree Farmer

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703

Contact: MARK 13428 Victory Ln. // PO Box 124 Email: Mark@lumbermensco.com Adams Center, NY 13606 Phone: 888-401-6367 EXT 708

with 1700 hours, in very good

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

Item ID: 14175

Item ID: 14154

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

leaks winch, ready to work! call for more info

'02 548G3

'02 John Deere 650H

‘83 John Deere 4850

Item ID: 14077 Item ID: 14173 Contact: Austin no more than 5000 hrs 65% undercarriage, 6 Ph:blade, (888) way good401-6367 winch, full cab x703 a couple small

L O G G I N G

‘16'02Halverson Barko 225 H140 Item ID: 14174 Skidsteer (DEMO)

CAT 525

John Deere ‘93'04-'05 Barko 180B

❘

cab,Lumbermensmagazine.com electric boxes, conveyor and  kickers and will peel a 3” post to a

7” post. Comes with a barko loader

‘14 Lo

On

** CALENDAR** ‘97 Timberjack 240D Item ID: 13917

SAM NYContact: STATE WOODSMEN'S FIELD DAYS Email: Sam@lumbermensco.com Fri, 18 August - Sun, 20 August Phone: Boonville, 888-401-6367 EXT 702 New York

www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25‘93 August Sat, 26548E August John-Deere

The Tree ‘01 CAT D5M Dozer that Started Item ID: 13958 it All!

Item ID:Arkansas 14083 Hot Springs, www.arkloggers.com Contact: AUSTIN

Email: Austin@lumbermensco.com 72ND888-401-6367 ANNUAL GREAT LAKES Phone: EXT 703

Contact: AUSTIN Email: Austin@lumbermensco.com Since 1986, Lumbermens has Phone: 888-401-6367 EXT 703 published a monthly circular

LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

‘94 Caterpillar MID-ATLANTIC LOGGING &320 BIOMASS Item ID: 13936 Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Selma, North Carolina Contact: AUSTIN Email: Austin@lumbermensco.com www.midatlantic-logging-biomass­ Phone: 888-401-6367 EXT 703 expo.com/

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

MayCAT be sent to­ ‘14 535C morris@lumbermens.co Item ID: 13840

POSTMASTER Contact: SAM Send address changes to: Email: Sam@lumbermensco.com Lumberman's Exchange Phone: 888-401-6367 EXT 702 P.O. Box 1916 Columbia, TN 38402

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, principles 648G and ‘04 JohnitsDeere III associates, are not liable for Item ID:held 13878 errors or omissions. Reproduction, Contact: AUSTIN in whole or part, is prohibited with­ out written consent.

Email: Austin@lumbermensco.com Phone: 888-401-6367 703 ©2017 WoodsEXT Publishing

machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine

S &‘04 W Hood 125 Band Mill with Loader 28000 Item ID: 13971 Caterpillar generator - Low hours

Item ID 13876. Austin x703

Fri, 6 Oct - Sun, 8 Oct

‘98 611 Ex-Hydro Ax

Sam x702

** INFO LINK** Item ID: 13948

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw .....................

‘99 Hydro-Ax 511 EX 29

Item ID: 13799 Bell's Machining ..................... 27 Metal Detector's Inc. .............. 30 Contact: SAM Brute Force Mfg. ..................... 31 Midwest Sharpening.............. 26 Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 Buck Equipment (AIM) ........

36 Mor bark .....................................

9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper ............................

40 ‘05 Tigercat 230B Item ID:............................

13911 Row Electric 20

CW Mill-Hogzilla ................... 15 Contact: AUSTIN Dyna Products ........................ 35 Sawmill Exchange .................. 11 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Empire Hydraulics ...................

8 Select Sawmill .........................

19 Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

feet a minute also has CLT presses.

on the mill,AUSTIN electronic computer Set Contact: Email: Austin@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400

Cambridge, Ohio www.ohioforest.org

‘83 John Deere 4850..... 10 Thomas Industrial Controls

Item ID: 14073 Iron Bull ................................... 21 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Kilgore Saw .............................

22 Austin@lumbermensco.com Universal Refiner ................... 23 Email: Phone: 888-401-6367 EXT 703 Lignomat ................................. 24 WoodMizer ................................ l

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

feed deck 20 foot out feed deck Contact: SAM Email: Sam@lumbermensco.com with 44 inch wheels, and all the Phone: 888-401-6367 EXT 702 bells and whistles, its a production

http://www.kfia.org/ Item ID: 13781 KentuckyWoodExpo.aspx

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

10 hours this machine since it ‘11onTigercat 845C Item ID: 13927 has been rebuilt, it has a 24foot in

in ve1y good condition, Cuts 130

Contact: SAM Email: Sam@lumbermensco.com THE888-401-6367 PAUL BUNYAN Phone: EXT SHOW 702

Contact: SAM DIRECTOR DESIGN Email: Sam@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 702

Danckaert Band Resaw - Roughly

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

hours ready to run. Item ID 13434.

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet‘89 with electronic CAT D4H drives LGP for Item ID: 13999 carriage knees, husk including Contact: 48" bottomAUSTIN saw and 36" top saw Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

STACKING RAC ‘03 John Deere 748GIII Item ID: 13851

Contact: SAM Email: Sam@lumbermensco.com www.BakerProducts.net 800.S48.6914 I S73.663.7711 Phone: 888-401-6367 EXT 702 ❘ L!  (888) 401-MENS 401-MENS

NO. 27

L O G G I N G

John Williams ‘11 Tigercat (888) 401-6367 620D ext. 701 Item ID: 13929 j@lumbermens.co

BANDMILLS & HEADSAWS

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

Lexington, ‘88 John DeereKentucky 440D Skidder

MARKETING DIRECTOR

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

y

e

rts

al

n all

ht

08.

l.

aw

rks.

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

POLE & POST PEELERS

PS8 POST PEELER This peeler has been converted to electricity over hydraulic.

Comes with a operators cab, electric boxes, conveyor and kickers and will peel a 3” post to a 7” post. Comes with a barko loader mounted on a truck that ‘16 Halverson H140 has also been converted to elecSkidsteer (DEMO) tric power.

Item ItemID: IDJW-909632 13926. Sam x702 Contact: J Williams PORTABLE SAWMILL Ph: (888) 401-6367 x701 36” PORTABLE SAWMILL Maximum diameter log- 36” Maximum length of cut-20’6”

‘13 KMC 2500 Track Skidder 13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703 off onto a conveyor. This is a very

well built processor. Item ID 13820.

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

with John Deere power unit with

tach, oil pressure, water temp and

Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

BOLTS. Item ID 13475. Sam x702

good. in good working order. 22in

12’ bed extension, 18 HP B&S motor, only 530 hrs, blade meter dont work.

The last 2 owners sharpening tool & setting jig. have onlyID used it to load Item 13605.

Samtrucks x702or

Sam x702

LOGGING EQUIPMENT BANDIT

as a backup as needed. Has a CTR

WOODMIZER LT70 FULLY delimber, grapple has been rebuilt.

HYDRAULIC With only 2000 hours this Item Sam x702condition, Mill ID is 13694. in excellent 94 Barko 275mill, - Excellent valueedger both the and the have Caterpillar engines. with low at hours at 3,500. 5.9 The woodmizercontinuous has the 62 HP and CUMMINS grapple. the edger has a 26HP, it has Runs Great!. Item ID 13740. Sam the accuset 2 setworks, and x702 the twin blade edger which has BELL are around 900 hours. There 30 extra blades, that Bell willhas come 1990 Bell Super T - This with the machine, along with a brand new Duetz engine. Lever a 100 gallon fuel tank. control, 33” bar, pump and tranny Item ID 13906. Austin x703 Boom cylinders have minor leaks.

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

good condition. Just finished 10

Acre clearing job, ready to work!

Remote control. Big production

radio, heat/ac. Air ride works

grapple, 5,000 original hours.

approximately 1500 hours. Hour

new for $32,500. Item ID 13865.

372  Issue 364 Lumbermens 1986 NEW ❘  List  seLL  exchange  is buy save tight.

Comes mounted on floats.  since U JOINTS REAR AXLE works, interior veryclean, This little skidder should walk on

comesRotobec with ext. & edger. 62 motor, continuous

Excellent condition.

20 ftwith w/ 1999 Barko 160D - new engine

manuals and receipts. Purchased

50% or better. 475 hp Cummins

Value! PA. Item ID 12062. Sam x702

WOODMIZER LT-70 knuckleboom, 30' boom, 75hp

PORTABLE MILL Item ID 13185. BANDSAW Sam x702

One owner and comes with all

but electronic option is available.

adjustable to single two way. Great

1994 Barko 160B - Electric

kohingWOODMIZER head. head works LT great.

40

automatice firewood processor

1999 Bandit 1900 Tracked Disc

Has Log Lift. Uses 4-way wedge

Ph: (888) 401-6367 x703 WOODMIZER LT 40 LT 40 Hydraulic/Portable Comes w/15 Blades; some new. capacity!. Item ID 13421. Sam x702 An excellent condition!

BARKOSam x702 Item ID 13606.

amp gauges. Cuts logs up to 16”.

a Chomper Model 16 PDA

Handles logs up to 32”. Uses

13HP Honda motor. Manual start

DIXON SAWMILL VERY UNIQUE AND EFFECTIVE MILL! Dixon 52 in bottom blade and 38 in top blade. It has a ‘95 John Deere C6 four blade vertical edger diesel powered with a fuel efficient Tree Farmer duezt 247hp motor.

Item ID: 13920 Item ID 13812.

Contact: Austin Sam x702

low hours. Control panel includes

Firewood Processor - This is

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

36” PORTABLE SAWMILL Maximum diameter log-36” ‘93 Barko 180B Maximum length of cut-20’6” Item ID:by 14077 Powered Koehler gas 19HP Contact: Austin Blade 1-1/4” by 13’2” long Ph: Volt (888) 401-6367 12 saw-head x703 precision up/down 12 Volt Electrical Forward/Reverse Saw Head Travel.

Item ID 13899. Austin x703

Hp cat remote station 4400hrs 12’ ext diesel edger 2500hrs (excellent condition.).

IDextra trailer pkg accuset 2Item with 13238.

Chrisused. x700 Also have 25hp unit never electric conversion switch 1995 Barko 775 B Fellerwith Buncher gear excellent condition low - Pumps recently redone. 400 hrshrs new replacment 75-80k. on injection pump. always started Item ID 13564. Chris x700

Sam x702

‘05 Gehl CTL 70

Powered by a Koehler Diesel 9.8HP Blade-1-1/4” by 13’2” long 12 Volt saw-head precision up/down.

Item ID 13897. Austin x703

❘

 Lumbermensmagazine.com

** CALENDAR**

Case D350 Track Loader Item ID: 14085

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

The Tree that Started it All!

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August ‘08 John Deere 335C Hot Springs, Arkansas170 ‘95 Franklin www.arkloggers.com Item ID: 13910

Item ID: 14089

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

72NDContact: ANNUALAUSTIN GREAT LAKES Austin@lumbermensco.com LOGGING Email: & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 703 Thurs, 7 Sept - Sat, 9 Sept

MID-ATLANTIC

LOGGING & BIOMASS EXPO

DESIGN DIRECTOR Contact: AUSTIN Donna Heninger Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co “13

Danckaert Band Resaw - Roughly

‘04 JCB 441 Wheel

10 hours on this machine since it Loader

has been rebuilt, it has a 24foot in Item ID: 13888 feed deck 20 foot out feed deck Contact: AUSTIN Email: Austin@lumbermensco.com with 44 inch wheels, and all the Phone: 888-401-6367 EXT 703 bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags,

‘15 Tigercat 234B

it includes sets of Mcdonough Item two ID: 14090

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

‘89 Timberjack 230A Item ID: 13885

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

Contact: AUSTIN THE PAUL BUNYAN SHOW Email: Austin@lumbermensco.com Fri, 6 Oct - Sun, 8 Oct Phone: 888-401-6367 EXT 703

Cambridge, Ohio www.ohioforest.org

KMC 2500 Tack Skidder

‘09 John Deere 650J XLT

** INFO LINK**

Item ID: 14078

Austin Woods (888) 401-6367 ext. 703Contact: AUSTIN austin@lumbermens.coEmail: Austin@lumbermensco.com

Item ID: 14091

in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES ‘95 Bell Ultra T

ItemHD ID:Carriage 14070 2010 Cardinal

Carriages Contact:(Sawmill) AUSTIN - Cardinal Email: Austin@lumbermensco.com Carriage line it includes carriage Phone: 888-401-6367 EXT 703 with onboard log turners, carriage

B & B Mfg. ............................... 18

Contact: AUSTIN Email: Austin@lumbermensco.com M&F Gauge .............................

28 Phone: 888-401-6367 EXT 703

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker 5, 7 ‘05 ......................................

CAT TK560

Menominee Saw ..................... 29

sawyers cab, computer controls,

Item ID: 14004 Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Contact: SAM Brute Force Mfg. ..................... 31 Email: Sam@lumbermensco.com Buck Equipment (AIM) ........ 36 Send address changes to: Phone: 888-401-6367 EXT 702

Midwest Sharpening.............. 26

carriage knees, husk including

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

MAILING ADDRESS Phone: 888-401-6367 EXT 703

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's ‘93 Barko 180B Exchange, its principles and Item ID:held 14077 associates, are not liable for errors or omissions. Reproduction, Contact: in whole orAUSTIN part, is prohibited with­ Email: Austin@lumbermensco.com out written consent.

Phone: 888-401-6367 703 ©2017 WoodsEXT Publishing

Morbark ..................................... 9

Great Lakes Mfg. .................... 34

‘80 John Deere 540B Row Electric ............................

20 Item ID: 11345 Sawmill Exchange .................. 11 Contact: AUSTIN Select ......................... 19 Email:Sawmill Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

CW Mill-Hogzilla ................... 15 Dyna Products ........................ 35 Empire Hydraulics ................... 8

Hurst Boiler ............................. 14

‘85 John Deere 440D

Iron Bull ...................................

21 Item ID: 12453 Kilgore Saw ............................. 22 Contact: AUSTIN Email: Austin@lumbermensco.com Lignomat ................................. 24 Phone: 888-401-6367 EXT 703

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Thomas Industrial Controls..... 10 ‘02

drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC ‘07 Prentice 2432 Item ID: 14071

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Jackson Shavings Mill

Item ID: 13736 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Universal Refiner ...................Email: 23 Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net WoodMizer ................................ l 800.S48.6914 I S73.663.7711

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 29

L O G G I N G

Item ID: 13909 j@lumbermens.co

BANDMILLS & HEADSAWS

pressure guides. Top Casting wheel Selma, North Carolina Contact: AUSTIN Email: Austin@lumbermensco.com www.midatlantic-logging-biomass­ is supported on both sides. This Phone: 888-401-6367 EXT 703 expo.com/ is an extremely accurate machine

MARKETING DIRECTOR

‘99 Case Long John 850G Williams (888) 401-6367 ext. 701 Track Dozer

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

. Just

CALENDER OF EVENTS

Phone 315.284.4126 Fax MARCH 315.849.2045 Redwood Region Logging Website Conference www.empirehyd.com Email Ukiah, CA info@empirehyd.com

Item ID: 14118

Robert “Bob” Hege, III “Precision Under Pressure”

December 14, 1942 January 14, 2018

Has the Kubota Diesel Motor!

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Mar 15th - 17th, 2018

MAY Northeastern Forest Products Eq Expo Essex Junction, VT May 11th & 12th, 2018

Robert Hege III, passed peacefully on the evening of January 14, 2018 at Forsyth Medical Center in Winston-Salem, NC, due to complications from influenza. Bob served as President and owner of Meadows Mills in North Wilkesboro, NC.

EXPO Richmond 2018 Richmond, VA May 18th & 19th, 2018

Every Reputable Wide Band Supplier Offers 3 High Quality Swedish Steel

13428 Victory Ln. // PO Box 124 3 3” –Center, 8” Band Width Adams NY 13606

3 16 to 20 Gage 3 Double Cut Options 3 Choice of Swage or Stellite

WOLVERINE

BUT ONLY THE

BY MENOMINEE SAW GUARANTEES ‘05 Gehl CTL 70 • Cutting Edge Plasma Welds ID: JW-986495 • The Industry’s HighestItem Band Saw Capacity Contact: J Williams • Quick Delivery from our Inventory Ph: HUGE (888) 401-6367 x701

‘83 John Deere • Fast Sharpening & Exchange Program 4850to Keep YOU Running

chain conveyer, 8 way splitter, on Item ID: 14073 • Competitive Pricing 20,000lb goose neck trailer. Item ID Contact: Austin 13916. Austin x703 Ph: (888) 401-6367 x703

And ONLY Menominee Gives You Everything Best Value Portable Log Splitter You need in a Wide Band Saw – Plus with 1700 hours, in very good - Small manufacturer in PA has Expert Service from the Industry’s Most condition. Easily produces high made the best valued log splitter.

Knowledgeable Staff. quality chips with patented ‘Cone’ drum design. Can Got easilyaload 42’ Wide

Handles logs up to 32”. Uses

13HP Honda motor. Manual start Band Problem? vans and produce 6 - 8 loads per Saw butToday electronic option is available.

Call Menominee and You’ll day. Item IDLearn 13882. Austin Has Log Lift.the UsesPro! 4-way wedge Whyx703 More Mills Trust EDGERS & GANGS adjustable to single two way. Great

TOLL FREE in excellent condition. Runs great.

Firewood Processor - This is a 1-800-582-0470 Item ID 13644. Sam x702 homemade processor with a 10’ Brewco Saws - Two Brewco Saws

‘93 Barko 180B

‘16 Halverson H140 '15 Blockbuster 18-20 Plus Item ID: 14077 Firewood Processor Contact: Austin Skidsteer (DEMO) Item ID: 14148 Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

Value! PA. Item ID 12062. Sam x702

FIREWOOD900 PROCESSORS log deck. Has hydraulic grapple, 16th St., Menominee, MIa 49858

906-863-2609 Fax: and 906-863-1147 2010 Shop BuiltTel: Wood Processor chain kicker that all runs off

nch.

inch insert tooth circle saw, 30 foot

Email: info@menomineesaw.com - It has a 353 Detroit diesel, 40 of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks WWW.MENOMINEESAW.COM

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track '02 WoodMizer LT-40 Skidder Item ID: 11345

Skidder - Very good running

Item ID: 13920 '11-'12 Helle Sawmill Contact: Austin Item ID: 14119 Ph: (888) 401-6367 x703

off onto a conveyor. This is a very

56” auto carriage hydraulic head control cab, vertical 2 saw edger log turner, 5 log stop and load deck, 60’ long track. capacity!. Item ID 13421. Sam x702 Contact: MARK BARKO Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 1994 Barko 160B - Electric

702-875-2703 knuckleboom, 30' boom, 75hp

Sam x702

grapple, 5,000 original hours.

Item ID: 14078 Contact: Austin Ph: (888)AUSTIN 401-6367 x703 Contact: Kubota Diesel engine.

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 well built processor. Item ID 13820.

motor, Rotobec continuous

(excellent condition.). Item ID

Firewood Processor - This is

13238. Chris x700

a Chomper Model 16 PDA

1995 Barko 775 B Feller Buncher

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

One owner and comes with all

1999 Barko 160D - new engine with

manuals and receipts. Purchased

approximately 1500 hours. Hour

new for $32,500. Item ID 13865.

meter dont work. The last 2 owners

Sam x702

LOGGING EQUIPMENT BANDIT

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

1999 Bandit 1900 Tracked Disc

Boom cylinders have minor leaks.

Chipper - Cat Under Carriage at

Item ID 13694. Sam x702

50% or better. 475 hp Cummins

94 Barko 275 - Excellent value

Diesel. 7500 Hours. One owner.

with low at hours at 3,500. 5.9

Well maintained. Item ID 13294.

CUMMINS continuous grapple.

Sam x702

Runs Great!. Item ID 13740. Sam

2004 Bandit Beast Model 4680 -

x702

3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

Please see us at

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has Booth #421

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

372 Issue 364 1986 ❘ 630C  Grapple List  seLL  exchange  buy  save Model roatation on theLumbermens grapple w/ a  since 2006 Tigercat 30’ reach on the boom. Joystick

Ph: (888) 401-6367 x703

with 30ft conveyer! Only has about 150 hours. Excellent condition.

AUGUST Woodsmen’s Field Days Boonville, NY Aug 17th - 19th, 2018

r PT

ling

'02 Woodmizer LT-40 Super HD

a brand new Duetz engine. Lever

❘

 Lumbermensmagazine.com

S A W M I L L

3

INDUSTRY NEWS

** CALENDAR** ‘08 Timberking B20 Item ID: 13956

AUSTIN NYContact: STATE WOODSMEN'S FIELD DAYS Email: Fri, 18Austin@lumbermensco.com August - Sun, 20 August Phone: 888-401-6367 EXT 703

Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri,‘06 25 Brewco August - B1600 Sat, 26 Resaw August

Meadows Complete The#1Tree Sawmill that Started

Item ID:Arkansas 13862 Hot Springs, www.arkloggers.com Contact: SAM

Item ID: 14069

it All!

Email: Sam@lumbermensco.com 72ND888-401-6367 ANNUAL GREAT LAKES Phone: EXT 702

Contact: AUSTIN Email: Austin@lumbermensco.com Since 1986, Lumbermens has Phone: 888-401-6367 EXT 703 published a monthly circular

LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

‘05 Woodmizer MID-ATLANTIC LOGGING &LT300 BIOMASS Item ID: 14031 Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Selma, North Carolina Contact: AUSTIN Email: Austin@lumbermensco.com www.midatlantic-logging-biomass­ Phone: 888-401-6367 EXT 703 expo.com/

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky S&W Bandmill http://www.kfia.org/ Item ID: 13959 KentuckyWoodExpo.aspx

John Williams Danchaert Band Resaw (888) 401-6367 ext.

701 Item ID: 13876 j@lumbermens.co

Contact: AUSTIN Email: Austin@lumbermensco.com THE888-401-6367 PAUL BUNYAN Phone: EXT SHOW 703

Contact: AUSTIN DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 703 Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May beScragg sent to­Mill Sanborn morris@lumbermens.co Item ID: 14050

Contact: POSTMASTER AUSTIN Send address changes to: Email: Austin@lumbermensco.com Lumberman's Exchange Phone: 888-401-6367 EXT 703 P.O. Box 1916 Columbia, TN 38402

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Corley Sawmill Exchange,Complete its principles and Item ID:held 14035 associates, are not liable for errors or omissions. Reproduction, Contact: in whole orAUSTIN part, is prohibited with­ Email: Austin@lumbermensco.com out written consent.

Phone: 888-401-6367 EXT 703 ©2017 Woods Publishing

Bell's Machining ..................... 27

M&F Gauge ............................. 28 Meadows Mill, Inc. ................ 33

Edmiston Complete Menominee Saw ..................... 29 Sawmill Package

MetalItem Detector's Inc. .............. 30 ID: 14084

Brute Force Mfg. .....................

31 Midwest Contact: AUSTINSharpening.............. 26 Email: Austin@lumbermensco.com Buck Equipment (AIM) ........

36 Mor bark .....................................

9 Phone: 888-401-6367 EXT 703 Corley Mfg .............................. 32 Multitek ................................... 12 CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3 Hurst Boiler .............................

‘06 Woodmizer LT70 14

Electric

Iron Bull ................................... 21 Item ID: 14076 Kilgore Saw ............................. 22 Contact: AUSTIN Email: Austin@lumbermensco.com Lignomat ................................. 24 Phone: 888-401-6367 EXT 703

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

feed deck 20 foot out feed deck Contact: AUSTIN Email: Austin@lumbermensco.com with 44 inch wheels, and all the Phone: 888-401-6367 EXT 703 bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & WWood-Mizer 125 Band Mill with LT40 Item ID: 13995 Caterpillar generator - Low hours

Frick #1 Jumbo Mill

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Baker ...................................... 5, 7

Item ID: 13997 has been rebuilt, it has a 24foot in

Sam x702

** INFO LINK** B. H. Payne .............................. 16

‘14 Hurdle 3-HD

10 hoursBlock on this Sawmill machine since it

Fri, 6 Oct - Sun, 8 Oct

Item ID: 13957

B & B Mfg. ............................... 18

Danckaert Band Resaw - Roughly

on the mill,AUSTIN electronic computer Set Contact: Email: Austin@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

BANDMILLS & HEADSAWS

'99 Meadows #2 The Paul Bunyan Show ......... 39 Sawmill

Thomas Industrial Item ID:Controls 14108 ..... 10

hours ready to run. Item ID 13434.

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls,

‘13 Woodmizer 4000drives Sawmill cabinet with electronic for Item ID: 14000 carriage knees, husk including Contact: 48" bottomAUSTIN saw and 36" top saw Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

STACKING RAC '16 LT40 Super Hydraulic Item ID: 9903

Union Grove aSaw Knife.. 2, 37 Will handle 60”& Blade!

One Owner! 136 hours, Tons of Extra Parts. Priced cheap!

Universal Refiner ................... 23 Contact: AUSTIN Email: Austin@lumbermensco.com WoodMizer ................................ l Phone: 888-401-6367 EXT 703

Contact: SAM Email: Sam@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 702 800.S48.6914 I S73.663.7711

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 31

S A W M I L L

MARKETING DIRECTOR

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

POLE & POST PEELERS

Powered by a Koehler Diesel

Phone 9.8HP Blade-1-1/4” by 13’2” PS8 POST PEELER 315.284.4126 Fax long 12 Volt saw-head precision This peeler has been converted 315.849.2045 up/down. to electricity over hydraulic.Website www.empirehyd.com Comes with a operators cab, Email Item ID 13897. Austin x703 “Precision Under Pressure”andinfo@empirehyd.com electric boxes, conveyor kick-

ers and will peel a 3” post to a 7” post. Comes with a barko loader mounted on a truck that has also been converted to electric power.

Item ID 13926. Sam x702 PORTABLE SAWMILL

36” PORTABLE SAWMILL Maximum diameter log- 36” Maximum length of cut-20’6”

36” PORTABLE SAWMILL Maximum diameter log-36” Maximum length of cut-20’6” Powered by Koehler gas 19HP Blade 1-1/4” by 13’2” long 12 Volt saw-head precision up/down 12 Volt Electrical Forward/Reverse Saw Head Travel.

Item ID 13899. Austin x703

DIXON SAWMILL VERY UNIQUE AND EFFECTIVE MILL! Dixon 52 in bottom blade and 38 in top blade. It has a four blade vertical edger diesel powered with a fuel efficient duezt 247hp motor.

Item ID 13812. Sam x702

‘16 Halverson H140 WOODMIZER LT 40 Skidsteer (DEMO)

LT Hydraulic/Portable Item 40 ID: JW-909632 Comes w/15 Blades; some new.

Contact: J Williams An excellent condition!

Ph: (888) 401-6367 x701 Item ID 13606. Sam x702

JEM MACHINE, INC. 80 Frontage Rd. Grangeville, ID 83530

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703 off onto a conveyor. This is a very

Forklifts 23,000 lbs Hysters (2) Xl Models

Radar Disk Screen

‘83 JohnMobil Deere Chipper - Bandit 1900L 4850 Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’

well built processor. Item ID 13820.

vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

Ladder 10’ 2010 Shop Built WoodLog Processor

- It has a 353 Detroit diesel, 40 YOUR

Sam x702

M ‘05 Gehl A CTL 70 C H I N E

(excellent condition.).

Item ID ROLLING STOCK 13238.

Chris x700 1998 PETERBILLT 378

with John Deere power unit with

1,000,000 miles, 10 -over Pumps recently redone.

400speed hrs

1995 Barko 775 B FellerN-14.

BuncherJust Cummins 500hp

automatice firewood processor

low hours. Control panel includes tach, oil pressure, water temp and

Nicholson 22” A-5B Barker

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

but electronic option is available.

50% or better. 475 hp Cummins

have only usednice it to 34’ loadaluminum trucks or This is a very as a backup Haselectric a CTR end dumpas needed. with an

tarp, aluminum and delimber, grapple haswheels been rebuilt.

24.5 tires.

Single spring Boom cylinders have point minor leaks.

Acrowood 52” Chipper, 6K, H. Feed, Top Discharge

I N C

Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off

Chipper - Cat Under Carriage at

suspension. Has the small door in tailgate.

94 Barko 27513818.

- Excellent value Item ID Sam x702 Item ID 13694. Sam x702

Diesel. 7500 Hours. One owner.

with low at hours at 3,500. 5.9 SAWMILL

Well maintained. Item ID 13294.

CUMMINS continuous grapple.

‘00 HURDLE MODEL #2

Sam x702

Circular Sawmill 2 13740.

HeadSam Block Runs Great!.

Item ID

2004 Bandit Beast Model 4680 -

w. 671 Detroit power B32 x702

3412 Caterpillar Diesel engine

minor edger computer setworks, BELL infeed deck and outfeed rollers, 1990 Super T - This Bell has dust Bell chain. a brand new Duetz engine.

Lever Item ID 13825.

Sam x702

with 850 HP. 5300 hrs. Mill in

Blowercondition.

- 40,000 CFM good Just finished 10

of a 4 cylinderSOURCE Mercedes powerFORAcre clearing job, ready to work!

SINGLE USED inch insert tooth circle saw, 30 foot MANUFACTURING Remote control. Big production unit. Has a 4’ chain saw that kicksEQUIPMENT LUMBER 372  Issue 364

Lumbermens  since 1986

❘

 List  seLL  exchange  buy  save

power divider, front rear end, engine wire harness, head gaskohing head o-rings, works great. kets, head. injector front Item 13185.reman Sam x702 coverIDseal, transmission about 2 years 1999 Barko 160Dago.

- new engine with Item ID 13800.

Sam x702 approximately 1500 hours.

Hour good. in good working order. 22in

2001 BENSON END DUMP

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

andinjection 40K rears.

New fifthstarted wheel, on pump. always

meter dont work. The last 2 owners

Sam x702

Handles logs up to 32”. Uses

13HP Honda motor. Manual start

Mill is ID: in excellent Item 13920 condition, both the mill, and the edger Contact: Austin have Caterpillar engines.

Ph: (888) 401-6367 x703 The woodmizer has the 62 HP and the edger has a 26HP, it has the accuset 2 setworks, and capacity!. Item ID 13421. Sam x702 the twin blade edger which BARKO There are has 900 hours.

1994 Barko - Electric around 30160B extra blades, that will come with the knuckleboom, 30' boom, machine, 75hp along with a 100 gallon fuel motor, Rotobec continuous tank. grapple, 5,000 original hours.

Item ID 13906. Austin x703

a Chomper Model 16 PDA

Firewood Processor - This is

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

CAE 6’ Horizontal & 5’ Twin Horizontal

drum design. Can easily load 42’

WOODMIZER LT70 FULLY ‘95 John Deere C6 HYDRAULIC With 2000 hours this Treeonly Farmer

208-507-1615

J E M

WOODMIZER LT-70 comes with ext. & edger.

62 Hp cat remote station 4400hrs 12’ ext diesel edger 2500hrs trailer pkg accuset 2 with extra unit never used.

Also have 25hp electric conversion with switch gear ‘93 Barko 180B excellent condition low hrs Itemreplacment ID: 14077 75-80k. new Contact: Austin Chris x700 Item ID 13564.

Ph: (888) 401-6367 x703 WOODMIZER LT 40 PORTABLE BANDSAW MILL Excellent condition. 20 ft w/ 12’ bed extension, 18 HP B&S motor, only 530 hrs, blade sharpening tool & setting jig.

Item ID 13605. Sam x702

control, 33” bar, pump and tranny ❘

 Lumbermensmagazine.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

'10 Woodsman 440 Whole Tree Chipper Item ID:Tree 14105 The

that hours.

Started 3,000 original it All!

Contact: AUSTIN Email: Austin@lumbermensco.com Since 1986, Lumbermens has Phone: 888-401-6367 EXT 703 published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Boonville, New York '98 International www.starwebhosting.net/woodsmen/

Chipper Truck

ItemPRODUCTS ID: 14140 EXPO SOUTHWEST FOREST 164k miles can 15 cubic Fri, 25 August - Sat, 26haul August

yards, 12' long, small stash Springs, Arkansas compartment, very well kept truck Western Star Heavy Haul Hot Contact: MARK Contact: AUSTIN 72NDEmail: ANNUAL GREAT LAKES Mark@lumbermensco.com Email: Austin@lumbermensco.com 888-401-6367 EXTEXPO 708 LOGGING Phone: & HEAVY EQUIPMENT Phone: 888-401-6367 EXT 703 7 Sept 702-875-2703 Thurs, - Sat, 9 Sept

Escanaba, Michigan

‘04 Takeuchi TLN140 MID-ATLANTIC LOGGING & BIOMASS Item ID: JW-880805 Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Selma, North Carolina Contact: AUSTIN Email: Austin@lumbermensco.com www.midatlantic-logging-biomass­ Phone: 888-401-6367 EXT 703 expo.com/

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Shop John BuiltWilliams Firewood Processor (888) 401-6367 ext. 701

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

Contact: AUSTIN DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 703

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

Item ID: 13994 j@lumbermens.co

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

Shop Built Wood AD SUBMISSIONS May be sent to­ Processor

Item ID: 14038 morris@lumbermens.co Contact: POSTMASTER AUSTIN Send address changes to: Email: Austin@lumbermensco.com Lumberman's Exchange Phone: 888-401-6367 EXT 703 P.O. Box 1916 Columbia, TN 38402

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers ‘10 Shop Wood and writers, the Built Lumberman's Exchange,Processor its principles and associates, are not liable for Item ID:held 13916 errors or omissions. Reproduction, Contact: AUSTIN in whole or part, is prohibited with­ Email: Austin@lumbermensco.com out written consent.

Phone: 888-401-6367 703 ©2017 WoodsEXT Publishing

** INFO LINK**

‘06 Cord King Model 60 Item ID: 14068

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 70318 B & B Mfg . ...............................

58” Precision Chipper Item ID: 13975

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 M&F Gauge .............................

28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee ..................... 29 14’ SnowSaw Pusher Item ID: JW-492406 Metal Detector's Inc. .............. 30

Bell's Machining ..................... 27 Contact: AUSTIN Brute Force Mfg. ..................... 31 Midwest Sharpening.............. 26 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Buck Equipment (AIM) ........

36 Mor bark .....................................

9 Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

............................

CW Mill-ArmorHog .............. 17‘83Rotochopper International S-Series 40 Item ID: 14080 CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 Contact: AUSTIN Dyna Products ........................

35 Austin@lumbermensco.com Sawmill Exchange .................. 11 Email: Phone: 888-401-6367 EXT 703 Empire Hydraulics ................... 8 Select Sawmill .........................

19 Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler .............................

14Western ThomasStar Industrial Controls ..... 10 ‘06 Michigan Special Item ID: 14011 Iron Bull ................................... 21 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Kilgore Saw .............................

22 Austin@lumbermensco.com Universal Refiner ................... 23 Email: Phone: 888-401-6367 EXT 703 Lignomat .................................

24 WoodMizer ................................ l

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

Item ID: 14176

BANDMILLS & HEADSAWS

24.5 fronts 44k 22.5 rears 300k Danckaert Resaw - Roughly miles on Band rebuilt engine, good transmission doublesince L, 350 10 hours on this 8machine it Mack motor being used every day. has been rebuilt, it has a 24foot in Contact: MARK feed deck 20 foot out feed deck Email: Mark@lumbermensco.com Phone: 888-401-6367 708 with 44 inch wheels, andEXT all the

702-875-2703 bells and whistles, its a production

machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W‘15 125Cord Band Mill with King M44 Item ID: 13961 Caterpillar generator - Low hours on the mill,AUSTIN electronic computer Set Contact: Email: Austin@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, Schutte Hammermill

cabinet withGrinder electronic drives for Item ID: 13965 carriage knees, husk including Contact: 48" bottomAUSTIN saw and 36" top saw Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

STACKING RAC 3 Strand Log Deck Item ID: 14095

Contact: AUSTIN www.BakerProducts.net Email: Austin@lumbermensco.com 800.S48.6914 I S73.663.7711 Phone: 888-401-6367 EXT 703 ❘ L!  (888) 401-MENS 401-MENS

NO. 33

M I S C E L L A N E O U S

Woods Publishing

ADVERTISING SALES

www.arkloggers.com

Item ID: 14093

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com '85 Mack Truck

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Now One Phone Puts You in Touch with ThE Single Source “Precision Pressure” forUnderall your Sawmill Needs!

Corley Sawmill maChinery Tyrone Berry Carriage DriveS lewiS ConTrolS opTimizaTion Carriage Linear & Set Shaft Lewis Controls “Electronics for sawmills by sawmillers” Tyrone-Berry Carriage Drives & Parts • Headrig Slabbers Log Turners • Bandmills & Linebar Resaw Systems Board & Gang Edgers • Trimmers

‘93 Barko 180B

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: 14077 Contact: ‘89 CatAustin D4H LGP Ph: (888) 401-6367 x703 Item ID: 13999 Contact: Austin Ph: (888) 401-6367 x703

‘03 John Deere

Item ID: JW-909632 748GIII Contact: J Williams Ph: (888) 401-6367 Item ID: 13851 x701 Contact: Sam Ph: (888) 401-6367 x702

The Most Complete Line of Sawmill Machinery Since 1905!

‘95 John Deere C6 Tree Farmer

Single Machine or Complete Turn-Key Operation More Production & Profit is Only One Call Away For Parts, Service & Sales

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

mfg

Call (423) 698-0284 CORLEY www.corleymfg.com • sales@corleymfg.com

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888)John 401-6367 x703 2004 Deere

‘04 Loader ItemHood ID: 13920 Contact: Austin 28000

Ph: (888) 401-6367 x703 Item ID: 13971 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

648G III

Item 13878 This is a very off onto ID: a conveyor.

Contact: Austin Ph: (888) 401-6367 x703

well built processor. Item ID 13820.

BARKO hours, 36” pads.

It does have some 1994 Barko 160B Electric small leaks. Owner is going back knuckleboom, boom, 75hp his to rubber tired30' cutters because motor, continuous job hasRotobec changed.

Item ID 13898. grapple, 5,000 original hours.

Sam x702

No-Spill, Gentle Loading of Firewood or Mulch with Iron Bull Sam x702

(excellent condition.). Item ID

Firewood Processor - This is

Timberjack 240 - In excellent only 6650 hours. New center Reduce the risk of damaging your customer’s vehicle. The Iron Bull Cummins EZ-Load Hopper loads firewood gently and safely.

13238.

ChrisWell x700maintained with asection.

Chomper Model 16 PDA condition! engine with

‘05 Gehl CTL 70

‘83 Deere ‘14 John CAT 535C Item ID: 13840 4850

Contact: Sam Item ID: 14073 Ph: (888) 401-6367 x702 Contact: Austin Gentle loading Ph: (888) 401-6367 x703 The operator controls how fast the drop bottom doors open as the hopper is raised. installed as well as new master with 1700 in very cylinders.hours, Very clean andgood tight

condition.

Easily high machine. Item IDproduces 13885. Austin quality chips with patented ‘Cone’ x703

Item ID: JW-986495 Frick #1 Jumbo Mill Contact: J Williams Item ID: 13957 Ph: (888) 401-6367 x701 Contact: Austin Ph: (888) 401-6367 x703 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer.

Item tires @ 90%, Counter Weight, 6 ID Loading complete 13916.

Austin x703 Diesel Engine. cylinder Cummins All action is controlled from the operator’s seat.

Faster, easier and safer. NoFL. damage, no complaints.

Best Value Portable LogItem Splitter FOB:Okeechobee, ID -13090.

Small Sam manufacturer in PA has x702

ship major manufacturers, including… day.

Item from ID6 13882.

Austin x703 Has Lift. Uses240D 4-way wedge 1997Log Timberjack - This condition. wheeled.

Tracks for EDGERS & GANGS adjustable to single skidder comes withtwo 23.1way.

X 26Great rear bogies and chains for front

FIREWOOD PROCESSORS 5,152 hours, Delivered New in

2010 Wood5Processor 1995,Shop Cab Built with A/C, blades, -75 It has a 353 Detroit diesel, 40 reach, Branton Winch, Push

Operateand receipts. Purchased manuals single withoutarch leavingwith winch with only the seat!

Different new for $32,500.

ItemThis ID 13865.

6800 original hours. is a very sizes available.

Sam low x702 hour machine. Cummins 5.9

1999 Barko 160D -more new engine with Call for information Timberjack 460 Grapple Skidder.

Iron1500 Mfg. LLC approximately Hour - This machine isBull anhours. excellent

765-597-2480

meter dont Running work. The last 2Item owners condition. daily!.

ID have only used it to load trucks or 13860. Sam x702

as backup as needed.

Has a CTR ‘69a 207 Timberjack cable skidder Ad for 1999 Lumbermen delimber, grapple has been rebuilt.

Handles logs up to 32”.

Uses Bandit 1900 Tracked Disc - This Machine has a Brand be great starter skidder with a new with winch, new transmissiion and jmwoods@q.com We also offer expert Sharpening plus…

Boom have minor leaks.

Chipper Cat Under Carriage at 13HP Honda motor.

Manual start new 4cylinders cyl Services, Perkins Engine, engine. Item ID 13829. Sam x702 hydraulic pumps. Item ID 13826.

BANDSAW BLADES

Item 13644. Sam x702 Tree ID Trimmer, s/n CM4478,

“Our customers good. in good order. tach, oillike pressure, water temp and “We really Iron Bull’sgreat.

EZ-Load Hopper for loading machine.

Runsworking great.

Low Hrs. Condition.

Runs WOODS are impressed. ”22in firewood.

It does itCuts betterlogs and gentler than a frontkohing end loader. ” Elam Swarey Jr., head. head works great. amp gauges. up to 16”.

One owner. Item ID 13468. Sam READY. Item ID 13545. Sam x702 Jac Siemens, Southeast Pallet & Wood Products, Blumenort, Manitoba, Canada Parke County Firewood, LLC Item One and comes x702ID 13185. Sam x702 2001owner Timberjack 460C -with Thisall is a

LOGGING EQUIPMENT engine has a crack in it. It can be made the best valued splitter.8.25”wloaded x 2.625”h onto aBANDIT lowboy. This would 1994 Timberjack 450Clog - Grapple

drum design. Can1010 easily load 42’ 1993 Timberjack Forwarder We have the most sizes in stock to vans andhours. produce 6 - 8running loadspopular per but option&is ready available.

Samelectronic x702 - 16,000 Good

Brewco Saws Two Brewco Saws tires. Item ID -13446.

Sam x702 in excellent condition. great.

1993 Timberjack 380B Runs PG Highlift

Customers love automatic itfirewood when you’reprocessor easy on their trucks or1995 trailers.

With conventional hoppers or Item Barko 775 B of Feller Buncher automatice 453 detroit.

Lots new parts. electronic transmission. front end loaders, you have to be an expert operator to get it positioned just right. Now with Pumps recently redone.

400 hrs with John Deere power unit with IDa pickup 13785.without Sam x702 ID 13777.

Sam x702any operator can load theItem new EZ-Load Hopper, almost sending firewood on injection pump. always started low hours.

Control panel includes pieces Also great for loading mulch.

Timberjack 380 Skidder - Tight 1998flying.

Timberjack 460 - Excellent

Value!

Item 12062. tires atPA. 95% rearID and 30% Sam front.x702 Firewood Processor This isand a New brake bands in- winch homemade with a 10’ 2 good cable.processor Engine was rebuilt log deck.

Has a hydraulic grapple, years ago. Good strong running

chain and Item kicker all runs machine.

IDthat 13917.

Sam off x702 Welded to your lengths! of a 4 cylinder Mercedes power

1998 Timberjack 360 Cable Skidder

Item IDOverhaul 13694. Sam Major outx702 of frame.

Gang • Edger • Scragg 94 Barko 275 Excellent value Transmission has been completely low at hours 3,500.Reverse 5.9 Well maintained.

13294.

Trim •with Split Strob overhauled out• ofatframe.

12000 Hours withItem newID engine, 50% better. 475460D hp Cummins 2005or Timberjack - Same thing Diesel.

7500 Hours.

One as a John Deere 648GIII. owner.

Around

CUMMINS continuous Sam box alsoCustom overhauled outgrapple. of frame. dualx702 arch, comes with 77 Xjust 44.00about …and any Saws you Runs Great!.

Item ID 13740.

Sam 2004 Bandit Beast Model 4680 Has you a newcutting Injector pump and all X 32 tires. 3 at 60% and 1need new one. to keep longer… x702 new injectors. 25% onfor tiresless! on it.

3412 Caterpillar Diesel Excellent skidder.

Itemengine ID 13709. with 850 HP. 5300 hrs.

Mill in Sam x702

good finished 10 2005 condition.

TImberjackJust 608B - This cutter Acre clearing job, ready to work! has 10800 frame hours with a new

Item ID 13283. BELL Chris x700 1990 Bell Timberjack Super T - This Bell has ‘88 450B - Put new

acenterpins brand newinDuetz engine.

8 months ago,Lever it has a

Call Marvin a quote 231-924-5953 •that(fax) 231-924-6166 •with 11606 Brickyard Rd. • Holton, MI&49425 inch insert circleMiller saw, 30for foot Remote control.

Big production 33” bar, pump and radiator. tranny unit. a 4’ chain saw kicks new eslking beams new undercarriage less than a 1000 control, - ThisHas is an excellent skidder with Blade, 4X4,tooth Firestone 67X34.00/26 372   Issue Issue364 364 Lumbermens Lumbermens  since since1986 1986

❘ ❘

  List List  seLL seLL   exchange exchange   buy buy   save save

❘❘

  Lumbermensmagazine.com Lumbermensmagazine.com

** CALENDAR**

4 Flotation Tires & Rims Item ID: 14086

The Tree that Started it All!

Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August Mack Log Truck

Hot AMSprings, GeneralArkansas M818 Army Truck Item ID: 14576 www.arkloggers.com

Item ID: 14087

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

12’ Snow Pusher MID-ATLANTIC LOGGING & BIOMASS Item ID: JW-914720

Email: Austin@lumbermensco.com

MID-ATLANTIC ADVERTISING SALES Phone: 888-401-6367 EXT 703 LOGGING & BIOMASS EXPO

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR

‘05 Gehl CTL 70

John Williams Item ID: JW-986495 (888) 401-6367 ext. 701 j@lumbermens.co Contact: AUSTIN

DESIGN DIRECTOR Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Fri, 15 Sept - Sat, 16 Sept

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

'99 International 4700 BANDMILLS & HEADSAWS Chip Truck Danckaert Band Resaw - Roughly

Item ID: 14116 10 hours on this machine since it Only 71,697 Miles. has been rebuilt, it has a 24foot in

feed deck 20 foot out feed deck Contact: AUSTIN Email: with 44Austin@lumbermensco.com inch wheels, and all the Phone: EXT 703 bells and888-401-6367 whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine

'91 Fuel Harvester KENTUCKY WOOD EXPO Tub Grinder Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

http://www.kfia.org/ 3406 Cat engine and 4424 total KentuckyWoodExpo.aspx machine hours.

S & W 125 Band Mill with

Item ID: 14112 Lexington, Kentucky

AUSTIN SHOW THE Contact: PAUL BUNYAN Email: Austin@lumbermensco.com Fri, 6 Oct - Sun, 8 Oct Phone: 888-401-6367 EXT 703

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

72NDContact: ANNUALWALKER GREAT LAKES Email: Walker@lumbermensco.com LOGGING Phone: & HEAVY EQUIPMENT EXPO 888-401-6367 EXT 707 Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

Woods Publishing Contact: AUSTIN

Donna Heninger

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

** INFO LINK**

feet a minute also has CLT presses.

Item ID 13876. Austin x703

Kenworth Road Tractor Truck

Caterpillar generator - Low hours Item ID: 14092

on the mill,AUSTIN electronic computer Set Contact: Email: Austin@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 35

M I S C E L L A N E O U S

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

Phone 315.284.4126

The Next Generation Fax of 315.849.2045 Sawmill ControlWebsite Systems

Thomas Industrial Controls Haleyville, AL info@thomasic.com www.thomasic.com

www.empirehyd.com Email

“Precision Under Pressure” G402 Set-Shaft Carriage Setworks. info@empirehyd.com

We are proud to announce the newest release to our Sawmill Setworks Systems lineup. It’s been designed specifically for Set-Shaft carriages. Whether you cut Grade, Cross Ties, Pallet Stock or other Blocking, the G402 had been designed with your needs in mind. This system was built upon the same familial and reliable platform as our most popular G401 system, which we have had in operation worldwide for over 15 years. It is simple to learn and use, yet has sophisticated onboard diagnostics and data logging for troubleshooting, as well as production recording.

Some of the added benefits to the G402 include a larger 9.7 inch Touchscreen HMI that utilizes the same display and processor found in iPads. It’s much faster and has a crystal clear image with a wide viewing angle.

We are now including Blade Deviation Monitoring. This feature has proven valuable for both Circle and Band applications. It will detect, 13428 // POofBox record and Victory alert theLn. operator Saw124 alignment issues, with audio and Adamsbefore Center, NY 13606 visual alarms, a damaging an expensive Saw and/or Lumber.

We have solutions for most Sawmill machinery. Call or email us today to discuss your equipment needs!

‘93 Barko 180B

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot 372  Issue 364

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens  since 1986

❘

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

1999 Barko 160D - new engine with

manuals and receipts. Purchased

approximately 1500 hours. Hour

new for $32,500. Item ID 13865.

meter dont work. The last 2 owners

Sam x702

LOGGING EQUIPMENT BANDIT

50% or better. 475 hp Cummins

Has Log Lift. Uses 4-way wedge

grapple, 5,000 original hours.

Item ID 13185. Sam x702

One owner and comes with all

but electronic option is available.

13HP Honda motor. Manual start

motor, Rotobec continuous

1995 Barko 775 B Feller Buncher

automatice firewood processor

1999 Bandit 1900 Tracked Disc

knuckleboom, 30' boom, 75hp

13238. Chris x700

a Chomper Model 16 PDA

Handles logs up to 32”. Uses

1994 Barko 160B - Electric

(excellent condition.). Item ID

Firewood Processor - This is

‘05 Gehl CTL 70

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Chipper - Cat Under Carriage at

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

Diesel. 7500 Hours. One owner.

with low at hours at 3,500. 5.9

Well maintained. Item ID 13294.

CUMMINS continuous grapple.

Sam x702

Runs Great!. Item ID 13740. Sam

2004 Bandit Beast Model 4680 -

x702

3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 Lumbermensmagazine.com

‘99 MEADOWS SAWMILL Computer has been replaced, it comes with 5 extra blaeds, 4 extra Belts, 3 phase Air Compressor and a saw sharpener. Mill is in Excellent condition! Reason for selling: Sawmill is too Big for what we need.

Item ID 13642. Chris x700 04’ WOODMIZER LT 70 HYDRAULIC The Tree Only 1100 hours on this mill, it that Started has a Cat diesel turbo engine, laser All! 2 setworks, sight, debarker,itaccuset and extra blades to go with it.

Also Since 1986, Lumbermens has includes a Bearing roller table. published a monthly circular Mill isreaching in excellent condition. sawmills, loggers, pallet recyclers Item makers, ID 13940.

Austinand x703 industrial woodworking plants

worldwide.

1984 LANE MODEL 8400 SAW MILL Heavy duty PUBLISHER four 14’ (4) head table Publishing w/ a topWoods saw. Silvatech Set works and hasADVERTISING 45-50 foot of SALES track frame.

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

** CALENDAR**

Surprisingly good condition! Great Value at this price!

Item ID 12689. Sam x702

mounted over the mandrel. The mill and edger were designed to be operated by the same person. Mill and edger run off of NY STATEaWOODSMEN'S FIELD DAYS 1996 WOODMIZER single 471 Detroit Power unit, August - Sun, 20 August PORTABLE SAWMILL Fri, 18 the power unit has its own axle.

New York Log turner, Mill model LT40HDD40. Hour Boonville, Comes with Mellott meter reads 4,393 hrs. 4 www.starwebhosting.net/woodsmen/ cyl; 40 3 strand log deck, and a sawdust HP Lombardini engine; Complete conveyer under the saw. The SOUTHWEST FOREST PRODUCTS EXPO rebuilt at 4,000 hours. Also has mill is set up and in production.

Fri,in 25 Also August - Sat, is 26aAugust debarker and ride along seat. Mill available Case 580B Hot Springs, Arkansas excellent working condition.

Loader with forks & Bucket, that www.arkloggers.com Item ID 13457. Sam x702 can be included for 6K. Item ID 13914.

72ND ANNUAL GREATAustin LAKESx703 2001’ FRICK TIMBER LOGGING & HEAVY EQUIPMENT EXPO IGER SAWMILL Thurs, 72006 SeptB1600 - Sat, 9BREWCO Sept Portable on single axle, 14’ Escanaba, GRADE RESAW Michigan carriage/all steel. 4 Head blocks This is a stationary band resaw with 3 tapers, manual setwork, system.LOGGING It includes infeed with MID-ATLANTIC & BIOMASS and dogs. 48’ track broke into 3 hydraulic hold down, outfeed Fri, 15 Sept - Sat, 16 Sept sections. Miner 3 blade edger- rollcase with board separator Selma, North Carolina 1 fixed blade/2 movable,www.midatlantic-logging-biomass­ will system, lumber transfer, MID-ATLANTIC cut 4” thick cant.

The edger is complete runaround system.

Mill expo.com/ LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

** INFO LINK** B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

is capable of cutting 16 X 16 X CLASSIFIEDS 18 FOR cants. Has all new height and width detectors and new feed Call 888.401.MENS chain. Cuts with a 2” bandsaw Seecomes pictures, and and with prices, approximately Location of allComes equipment 25 extra bands. with aat4 Xwww.LumberMB\ISmagazine.com 4 operators cab and controls.

Item ID 13862. Sam x702

BANDMILLS & HEADSAWS

2006 LT40 SAWMILL Remote 51hp Caterpillar engine 10 hours on this machine since it with 7500 hours. Loader, has been rebuilt, it has a 24foot in debarker, with trailera package. x702 feedItem deckID 2013664. foot out Sam feed deck Danckaert Band Resaw - Roughly

with 44 inch wheels, and all the

CLEEREMAN MODEL 40 bells and whistles, its a production 3 knee - Right hand Includes track and machine, with air strain conveyers controls. Electric over air setworks. thatItem go up down, with x700 airbags, IDand 13240.

Chris it includes two sets of Mcdonough

pressureFRICK guides.SAWMILL Top Casting wheel

2000, Frick 48” blade, all metal, rails and bunk. 250 TURBO Cummins is an extremely accurate machine Engine. All in Great Shape!! in ve1y condition, Cuts 130 Itemgood ID 13418.

Sam x702 is supported on both sides. This

feet a minute also has CLT presses.

SAWMILL Item ID FRICK 13876. Austin x703

Everything on the mill seems to work fine. Has belts, teeth, and blade with Caterpillar generator - Low hours it. Power unit is 230 Cummins. All it on the is mill, electronic computer Set needs a starter and radiator.

Item ID 13904.

Austin x703 works,1 1/2" or 2" band, 22ft. track

S & W 125 Band Mill with

Cat 3406 140KW Genset, 12,400

FRICK SAWMILL WITH A 3 HEAD BLOCK CARRIAGE Sam x702 Sawmill operation for sale. The CARRIAGES whole operation& DRIVES is electric powered.

Frick 2010 Cardinal HD Sawmill Carriage with a 3 head block carriage (has slide Carriages (Sawmill) - Cardinal for a fourth), 54 inch head saw, Carriage line it includes carriage almost new (also have spare with onboard log turners, carriage saws), Mellot 3 strand log deck, drive, hyd pac fortwo carriage, log turner, and saw 4 inch Minor edger.

The edger has a 30 sawyers cab, computer controls, horsepower motor, the cabinet with electronic drivesmill for is powered by a 150 horsepower carriage knees, husk including motor. Both the mill and edger 48" bottom saw and 36" top saw have sawdust chains.

Item ID 13607. Chris x700 hours ready to run. Item ID 13434.

STACKING RAC

NEWMAN SHAVINGS MILL 01044 Single box machine.

Item ID 13377. Sam x702 WOOD-MIZER BANDMILL SAWMILL 1991, LT40HD G24. Trailer mounted bandmill can easily be moved and set up and cutting lumber in 30 minutes. Cut logs up to 21 feet long. Onan gas 24 hp engine, runs great. Bandmill has extremely low hours (1,235 hrs).

In wonderful condition. Easy to operate.

Always stored inside! www.BakerProducts.net 800.S48.6914 I S73.663.7711 Item ID 13456.

Sam x702 ❘ L!  (888) 401-MENS 401-MENS

NO. 37

“Precision Under Pressure”

A D D I R EC TO RY

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Air Systems Mfg............................16..........................828-757-3500 Anson...............................................3.............................800-663-7723 B & B Mfg.......................................12..........................800-654-5320 B. H. Payne.....................................8.............................404-761-8711

Barko 180B Baker................................................6, ‘93 11......................800-548-6914 ‘16 Halverson H140 Item ID: 14077 Bartlett Saw Service & Supply....36..........................800-566-0319 Contact: Austin Skidsteer (DEMO) Bell's Machining............................12..........................888-995-1965 Ph: (888) 401-6367 x703 Item ID: JW-909632 Buck Equipment (AIM).................26..........................800-803-3365 Contact: J Williams Ph: (888) 401-6367 x701 Built-Rite.........................................35..........................800-757-2520 Corley Mfg......................................34..........................423-698-0284 Claussen All-Mark, Inc.................13..........................800-252-2736 CRD Metalworks...........................4.............................888-667-8580 CW Mill, DynaHog........................15..........................800-743-3491 CW Mill, ArmorHog......................17..........................800-743-3491 ‘95 John Deere C6 F&R Manufacturing......................9.............................800-355-1250 Tree Farmer

Great Lakes Mfg............................8.............................877-248-5677 Item ID: 13920 Contact: Austin ‘13 KMC 2500 Track Hahn Machinery............................13..........................800-483-8825 Ph: (888) 401-6367 x703 SkidderMetal, Inc...................16..........................800-593-8377 Honeyville 13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

,-soo-211-94&8

Item Boiler....................................24..........................877-774-8778 ID: 14078 Hurst Contact: Austin capacity!. Item ID 13421. Sam x702 Industrial Seating, Inc...................18..........................800-436-2839 Ph: (888) 401-6367 x703 BARKO Iron Bull Mfg. LLC.........................34..........................765-597-2480 1994 Barko 160B - Electric JEM Machine, Inc..........................32..........................208-507-1615

off onto a conveyor. This is a very

knuckleboom, 30' boom, 75hp

JM Wood Auctioneer...................6.............................800-447-7085

well built processor. Item ID 13820.

motor, Rotobec continuous

Keystone Machinery....................34..........................717-859-4977

Sam x702

grapple, 5,000 original hours.

Kilgore Saw. ....................................14..........................888-857-5153 (excellent condition.). Item ID Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

13HP Honda motor. Manual start

• Through-beam range u1p to 230 feet vans and produce 6 - 8 loads per but electronic option is available.

• Waterproof -Has IP67 rated day. Item ID 13882. Austin x703 Log Lift. Uses 4-way wedge Not affected adjustable by vibration EDGERS &• GANGS to single two way. Great • 60k LUX Immunity toPA.sunlight Brewco Saws - Two Brewco Saws Value!

Item ID 12062. Sam x702 in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot 372  Issue 364

Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens  since 1986

❘

Korners..................................28..........................800-471-5060 13238. Chris x700 aKlug Chomper Model 16 PDA 1995 Barko 775 B Feller Buncher automatice firewood processor Lignomat.........................................26..........................800-227-2105 - Pumps recently redone. 400 hrs with Deere power unit..............1.............................800-455-8807 with L-M John Equipment Co. Ltd.. on injection pump. always started M&F Gauge....................................14..........................325-641-8300

low hours. Control panel includes tach, oil pressure, water temp and

good. in good working order. 22in

Menominee Saw............................30..........................800-582-0470

amp gauges. Cuts logs up to 16”.

kohing head. head works great.

Midwest Sharpening....................34..........................231-924-5953 Item ID 13185. Sam x702

One owner and comes with all

Multitek.and ..........................................10..........................800-243-5438 1999 Barko 160D - new engine with manuals receipts. Purchased Northeast Implement, Inc...........30..........................607-589-6160 approximately 1500 hours. Hour new for $32,500.

Item ID 13865.

meter dont work. The last 2 owners Sam x702 Ozark Industrial.............................22..........................877-266-8208

LOGGING EQUIPMENT have only used it to load trucks or Pantron Automation, Inc.............38..........................800-211-9468 as a backup as needed. Has a CTR Piper’s Saw BANDIT Shop...........................7.............................800-845-6075 delimber, grapple has been rebuilt.

1999 Bandit 1900 Tracked Disc

Prolenc Mfg., Inc...........................20..........................877-563-8899 Boom cylinders have minor leaks.

Chipper - Cat Under Carriage at

Row Electric...................................18..........................800-248-4479 Item ID 13694. Sam x702 50% or better. 475 hp Cummins Select 7500 Sawmill. ...............................28..........................613-673-1267 94 Barko 275 - Excellent value Diesel.

Hours.

One owner.

Southern Metals. ...........................37..........................678-207-8550 with low at hours at 3,500. 5.9 Well maintained.

Item ID 13294.

CUMMINS continuous grapple.

Sam x702 Industrial Controls.........36.................

Thomas www.thomasic.com

Runs Great!. Item ID 13740. Sam 2004 Bandit Beast Model 4680 Timber Machine Technologies...40..........................506-691-0162 x702

3412 Caterpillar Diesel engine

TraxPlus...........................................39..........................601-635-5543

with 850 HP. 5300 hrs. Mill in

BELL

Universal Refiner...........................2.............................800-277-8068

good condition. Just finished 10

1990 Bell Super T - This Bell has

Universal Wearparts, Inc.............36..........................800-647-8440 a brand new Duetz engine. Lever

Acre clearing job, ready to work!

Woodlandia....................................18, 22....................877-508-8777 Remote control. Big production control, 33” bar, pump and tranny

 List  seLL  exchange  buy  save

❘

 Lumbermensmagazine.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All! Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants 2011 DEERE 843K worldwide.

PUBLISHER

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

MID-ATLANTIC LOGGING BIOMASS 2015 BARKO 930 2013 DEERE&748H Fri, 15 Sept - Sat, 16 Sept

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR

John Williams 2011 DEERE 643K (888) 401-6367 ext. 701 j@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

Lexington, Kentucky http://www.kfia.org/ 2009 TIGERCAT 234 2013 TIGERCAT 724E KentuckyWoodExpo.aspx

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods 2013 TIGERCAT 620D (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

** INFO LINK**

2008 PRENTICE 2670

2014 TIGERCAT 630E

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags,

2015 TIGERCAT 620E it includes two sets of Mcdonough

pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S2014 & W 125 Band Mill with BARKO 595ML Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2013 CAT D5K

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights JEWELL CARRIER reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, 630E in whole2014 or part,TIGERCAT is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

930B 35 Dyna 2017BARKO Products ........................

2006Exchange HYDRO-AX 670 11 Sawmill ..................

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co 2012 DEERE 437D

POSTMASTER

2017 BARKO 595B

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

2012 DEERE 648

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

2013knees, DEERE 450J carriage husk including

48" bottom saw and 36" top saw

STACKING RAC

2013 TIGERCAT 620D

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 39