LBXonline presents The Lumberman's Exchange

January 2011

Since 1986 - The Original (800) 315-9950 or (615) 349-1890

-PHHFST 4BXNJMMT 1BMMFU .BOVGBDUVSFST 8PPE 3FDZDMJOH &RVJQNFOU

DEALS OF THE MONTH Jem Machine, Inc. "Your full source of Good Sawmill Equipment"

www.JemMachine.com

NEW - NEVER INSTALLED MORBARK TIMBER STACKER, Comes w/ 90ft. of Rail

RECONDITIONED NICHOLSON A5 DEBARKER

FALCON/KIMWOOD HOG

CALL OR EMAIL MIKE FREEMAN (503) 407-9652

lb^`Z[gZZbVc5\bV^a#Xdb

PALLET STOCK, STUDS, I-JOISTS, STRUCTURAL COMPONENTS THE L-M SAWS, WILL TAKE YOU TO THE NEXT LEVEL! Leading the industry in bundle cross cut systems since 1957!

New Design!

New Technology!

Portable Yard Saw Model 200MP-7-SS Gas Model 100MP-7-SS Electric 3 inch side shift, a standard feature

Traveling Arch Saw Hydraulically controlled No manual cutting Our most popular turn key system

The New L-M “I-CUT” Bundle cross cut system! * 60’ long frame to precision cut your I-Joists * Precision accuracy of +- 1/32” * Shorter system are available to process all your cutting needs * Tremendous labor savings, Guaranteed!

L-M Deck Cut Off Saw 3 foot to 12 foot bar lengths Hydraulically controlled

Automatic Strapping System Attach bottom crossers Side squeeze incorporated Polyester strap

Flush End Bump Rollcase Reduce or eliminate your end trims

The Verticut P4 System now offers scan and cut technology, reducing operator error by using a bar code system!

Visit our web site www.LMSaws.com to see our complete product line and videos!

L-M Equipment Co. Ltd Phone: 604-431-8800 Toll Free: 1-800-455-8807 Web Site: www.LMSaws.com E-Mail: Sales@LMSaws.com

Jem Machine, Inc. "Your full source of Good Sawmill Equipment" www.JemMachine.com

Bargain Basement Prices FALCON/KIMWOOD HOG Chippers & Hogs (20hp to 500hp)

We have (14) 24 - 30 ready for shipment and some still standing.

NEW— NEVER INSTALLED

P.O. Box 108 125 Airport Road Grangeville, Idaho 83530

$24,500

MORBARK STAC TRAC w/ 95’ of Track

ARMSTRONG #4

6gbhigdc\ )! G# =#!

H$C &*!(&& ################ $4,900

Ready to Install at your facility!

75’ w x 270’ l x 24’ h (2) 24-UNIT CHIP BINS Truck Bins (24 to 62 Unit)

In Stock 35” & 44”

GRAYCO METAL BUILDING

NICHOLSON 22” A5

HOG & CHIPPERS

Call or Email: Mike Freeman (503) 407-9652 wmikefreeman@gmail.com

Inventory Changes Daily Call Mike for your equipment needs.

20 USNR DOUBLE LENGTH INFEED

Office: (800) 282-5597 Fax: (208) 983-0633

Your Dollar Goes Further on Equipment with Us! 4 n

January 2011

Visit us online at www.LBXonline.com!

Original

5IF

-6.#&3."/Âľ4 &9$)"/(& Your #1 Source for Forest Industry Products!

The Lumberman’s Exchange is published monthly and is circulated internationally to sawmills, loggers, pallet makers, recyclers and industrial woodworking plants.

PUBLISHER Woods Publishing ADVERTISING SALES Morris Woods (615) 349-1890 morris@LBXonline.com DESIGN DIRECTOR Heninger & Associates lbxonline@comcast.net SALES MANAGER Michelle Cappel (800) 315-9950 x606 EQUIPMENT REPS Equipment Representative Daren Bodine (800) 315-9950 x603 Equipment Representative Tom Hirt (800) 315-9950 x604 MAILING ADDRESS P.O. Box 1916 Columbia, TN 38402-1916 (615) 349-1890 Phone (931) 233-0802 Fax AD SUBMISSIONS May be sent to— sales@LBXonline.com POSTMASTER Send address changes to: Lumberman’s Exchange P.O. Box 1916 Columbia, TN 38402 The Original Lumberman’s Exchange is published monthly

by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers the Lumberman’s Exchange, its principles and associates are not held liable for errors or omissions. Reproduction in whole or part prohibited with-out written consent. Š2011 by Woods Publishing.

** Auctions ** CHARLESTON AUCTION — Page 10 WWW.CHARLESTONAUCTIONS.COM HUGE AUCTION IN HOUSTON STOCK BUILDING SUPPLY SURPLUS Thursday, January 13, 9 a.m. Central Onsite Auction with Simultaneous Webcast JAMES G. MURPHY — Page 11 WWW.MURPHYAUCTION.COM PUBLIC AUCTION - SOUTHWEST FOREST PRODUCTS 7i`˜iĂƒ`>ÞÊUĂŠ >Â˜Ă•>ÀÞÊ£™ÊU棊\ääÊ>°“° Ash Fork, Arizona

** INFO LINK ** Amark .....................................12

LM Equipment, Canada ............3

Anson ........................................1

M&F Gauge ............................25

B & B Mfg. .............................31

Machinery Sales Co., Inc. .........8

B. H. Payne .............................15

Menominee Saw......................34

Baker .................................17, 38

Metal Detectors, Inc. ...............26

Bandit Industries, Inc. .............13

Midwest Sharpening Service ..37

Bartlett Saw Service................37

Multitek ...................................32

Bay Equipment........................39

Phase-A-Matic ........................29

Ben Jones Equipment........19, 27

Piper’s Saw Shop ....................24

Buck Equipment (AIM) .........16

Resource Recovery .................29

Cardinal Wireless ....................30

Rotochopper ............................40

Charleston Auctions ..............10

Row Electric............................19

Concept Products ....................28

Sawmill Exchange ..................33

Cord Master ............................22

Select Sawmill ........................26

Corley Mfg ..............................35

Sharp Tool ...............................35

CRD Metalworks ....................14

Suffolk Machinery ....................2

Dyna Products .........................18

Truck & Trailer World...............7

Hutto Wood Products ..................

US Blades................................36

James G. Murphy.................. 11

Woodmizer .... 20,21 (Centerfold)

Jem Machine .............................4

X-S Iron ........................9, 23, 27

Litco ........................................15

For Classifieds Call Your LBX REP at 1-800-315-9950

FOR CLASSIFIEDS Call 800.315.9950 See pictures, prices, and Location of all equipment at www.LBXonline.com

BANDMILLS & HEADSAWS

Timber Harvester 36HTE Band Sawmill - Purchased new in Oct. of 2005 for $41,690. It has the following extra features 1. Hydraulic power rolls- for exiting large cants/timbers 2. 30 HP Electric three phase motor 3. Large roller guide assembly 4.

3rd log post 5. Dual chain drive assembly 6. Electric Set works 7.

Dragback guide assembly 8. 4’ bed extension Saw is capable of sawing up to 22’ long We were sawing 5-6 MBF per day when we took it out of production. Everything is in working condition. Ran indoors forless than 8 months. Replaced with a larger saw. - Item ID-10489 - Tom 800.315.9950 x604

BLOWERS

45� Bayley material blower 25HP - This 45� Bayley Mfg. blower has a 20-1/4� side inlet and a 12� top outlet. The fan diameter is 36� and the housing width is 15-1/2�. It has a 25 HP 220/440 drip proof motor with a 6-B drive. - Item ID-11783 - Daren 800.315.9950 x603 Chicago Blower - Siemens 75-hp motor, Series 30GI blower. 1775 RPM. - Item ID-10820 - Michelle 800.315.9950 x606 Koger Blower - 75-hp, 54�x16� fan, 18� inlet and 18� outlet - Item ID10849 - Michelle 800.315.9950 x606 Phelps blower with 20 HP motor - Item ID-11742 - Michelle 800.315.9950 x606

CARRIAGES & DRIVES

Salem 4-headblock Carriage - Left handed - Item ID-10846 - Michelle 800.315.9950 x606

CHIP SCREENS

Morbark Chip Screener - 6x6 chip screener with 5-hp fine sawdust blower and 10-hp chip blower with pipes. All Hydraulic. Good condition. - Item ID-10766 - Michelle 800.315.9950 x606

CHIPPERS

CM&E 36� chipper. Bottom discharge. - 75 HP - Item ID-11751 Michelle 800.315.9950 x606 1994 WOODCHUCK - ASPLUNDH WOOD CHIPPER. Hrs: 2226, TIRES: 8.75-16.5LT, ID# 1W9B71210RS200896, WEIGHT IS 4000#, WD 17586, WOOD CHIPPER SELF FEEDER WITH FORWARD AND REVERSE CONTROL, 6 CYLINDER FOR GAS MOTOR, 16 INCH DRUM Item ID-11807 - Daren 800.315.9950 x603 2000 BANDIT 150XP - CUMMINS 3.9L DIESEL 12 IN. CAPACITY - Item ID11790 - Michelle 800.315.9950 x606 2008 Dynamic 585 Chipper - Factory Rebuilt with upgraded components including new discharge chute, new larger bearings, new larger feed pins, new access panels to chip chamber wear plates. JD 500 HP engine with 2200 hrs. Limited factory warranty on upgraded features. - Item ID-12059 - Tom

The Original Lumberman’s Exchange n 5

6 n

HiViZ

Call us today for all your used equipment needs! —Michelle

8^in E]dcZ

âœ

E#D# 7dm &.&+ 8dajbW^V! IC (-)%'

*Company name and address required to process your change.

6YYgZhh

>cY^k^YjVa CVbZ

The Original Lumberman’s Exchange

Company Name*

January 2011

DEALS OF THE MONTH – JANUARY –

2005 VALMET 890.2 20-Ton Forwarder

2002 WOODMIZER LT-40HDG-25

.05*7"5&% 4&--&3

Item ID: 12081 Contact: Michelle Ph: 800-315-9950 x606

Michelle Cappel Phone: 800-315-9950 Ext. 606 Daren Bodine Phone: 800-315-9950 Ext. 603

If you need to Change your Address or Add Your Name to our mailing list, then please complete this form and mail to:

â?‘ Please Add

â?‘ Please Change â?‘ Please Remove

O^e

EQUIPMENT REPRESENTATIVES

Tom Hirt Phone: 800-315-9950 Ext. 604 800.315.9950 x604 2008 Model 570 Dynamic Chipper - 1830 Hrs; New Drum at 750 hrs; Cummings 325 HP Engine; New wear plates in belly pan and discharge chute. Remote Control. Runs good.

- Item ID-12061 - Tom 800.315.9950 x604 48� Precision Chip Pak Reconditioned, new 100-hp motor, chip blower, cyclone, 5x5 screen with new screens 1-3/4� & 3/4�, 6 knife with 3 blocked off, 20-hp on blower, new bearings, new belts, new sheaves. Price includes loading on truck. - Item ID-11586 - Michelle 800.315.9950 x606 66� Fulghum 8 Knife Chipper - with a 250 hp motor, $7500. - Item ID-10478 - Tom 800.315.9950 x604 Can Car Chip & Saw grinder with air hold downs - Item ID-11738 Michelle 800.315.9950 x606 Fulghum 54� 8 knife chipper. Horizontal feed. Vertical discharge.

No motor. No pulley on machine but a bushing is present. - Item ID-11737 - Michelle 800.315.9950 x606 HMC 48�side entry, top discharge

10,450 hours. Rear Bogeys recently sealed.

8 wheeled. Good condition and well maintained. Eco Tracks.

Best price available for a 20 ton Forwarder in this condition. Ready to go to work TODAY! Motivated Seller! These machines go in wet conditions and hills. Priced way below market.

Item ID: 12068 Contact: Tom 800.315.9950 Ext. 604

1996 BARKO 275B

Item ID: 12076 Contact: Daren Ph: 800-315-9950 x603

See Photos online at XXX -#9POMJOF DPN chipper. It hs a model CM 48. Serial 23-111. It has a 75 HP 208-230/460 totally enclosed motor and is a very clean looking machine - Item ID11750 - Michelle 800.315.9950 x606 Hydraulic Feed Chipper - BANDIT 4B Cummins Power, Works Well - Item ID-11806 - Michelle 800.315.9950 x606 Precision 48 Chipper & Shaker Fines blower and dual trailer shoot.

125-hp electric motor and 36’ vibrating conveyor. - Item ID-11667 Michelle 800.315.9950 x606 Trelan DL18 Whole Tree Chipper Powered by a 475-hp Cat 3406 diesel engine. Has a knuckleboom loader.

Will chip up to an 18� diameter log.

Is pulled with a semi tractor. Cab has sound protection and heat.

Rebuilt from the ground up, new wheel bearings, new face plate for chipper wheel, changed Detroit engine to Cat engine went from 300-

hp to 425-hp, added new belts and heavier bearings. Only run about 6 months after rebuild. Can be used to make fuel-wood. Is ready to go, needs no work. Was manufactured in the mid 80’s. extra knives that come with it - Item ID-11292 Michelle 800.315.9950 x606

CHOP SAWS

Block saw - This well-guarded block saw has a 4x6 capacity. Blocks drop into a small elevator. It has a motor on the elevator and one on the saw. Motor controls are present.

Air is hooked up to actuate the saw stroke. Feed is manual. Block length is adjustable - Item ID-11838 - Daren 800.315.9950 x603

COMPLETE SAWMILLS

HMC MM10 Right hand 4 block modular mill-- - 2-saw vertical edger and 150 HP motor and starter.

Carriage is all air powered. Needs a log turner, the carriage is 17’ 8� total

Visit us online at www.LBXonline.com!

lackstone

I

eaver

Firewood Processors

The Blackstone Beaver Components The Blackstone Beaver Firewood Processor is built in the USA with industry standard components.

Hydraulic systems built with high quality Parker hoses and hose ends.

• • •

Operator comfort in enclosed cab Dual joystick controls ease hand fatigue Comfortable, adjustable seat Joystick controls Engine controls inside cab

lackstone

eaver

I

Size Maximum log length is 25’ with a 24’ diameter. Cut length is adjustable up to 24” long. Splitting head can be adjusted by up to 10” for consistent splits on various log diameters.

• •

P: (508) 478-5902 F: (508) 321-9876

123 Uxbridge Road Mendon, MA 01756

Customization Blackstone Beavers are customizable by the manufacturer. Integrate your ideas into a production machine built to match your requirements! Don’t need a mobile unit, specify a skid mount.

Speed The processor comes standard with a 3-stage hydraulic pump. All strokes are performed in high speed by default, but if greater splitting force is needed, pressure will immediately be increased.

When load is decreased, the high speed stroke will renew.

www.blackstonebeaver.com For Classifieds Call Your LBX REP at 1-800-315-9950

The Original Lumberman’s Exchange n 7

WE ARE OVERSTOCKED! PRICES REDUCED! TAKE ADVANTAGE OF THIS CHANCE TO SAVE BIG! 9802 North Vancouver Way Portland, Oregon 97217

7 i Ê > }Ê Ã Êv ÀÊ i«ÌÊ 8ÊUÊ >V Ã> iÃJ Ã °V

0H s &AX WORLD’S LARGEST INVENTORY New & Used Sawmill & Planing Mill Equipment %DEM v X "ALANCED 6IBRATING #ONVEYOR

.%7 -ORBARK 3TAC 4RAC

3IMONDS v +NIFE 'RINDER

BANDMILLS & HEADRIGS Salem 6’ Air Strain Bandmill Kockums 6’ Quad Maxi Mill with 6’ Quad Salem 7’ RH Bandmill Salem 5’ Air Strain Bandmill L&B 6’ Air Strain Twins McDonough 62” Twin Air Strain CARRIAGES & DRIVES Salem Linear 36" 2-Block Tyrone 240 Hydraulic Drive Corley 40” Hydraulic 3-Block Salem 24” 3-Block Linear Carriage USNR 2000, 42" Stud Carriage Salem 60” 4-Block Carriage Salem 42” 4-Block Carriage CHIPPERS & SCREENS BM&M 5’X14’ Screen Rotex 6’X16’ Screen Precision 58” Horizontal Feed West Salem 58" Horizontal Feed Precision 8X8 Screen Kockums 8X8 Screen Precision 66" Horizontal F. Precision 118” HFBD Chipper Precision 96” Whole Log Precision 48” Horizontal F. B.C. 6140 Slant Disc CM&E 36” Rechipper DEBARKERS Nicholson 35" A-2 Debarker Nicholson 22” A-5 Debarker Nicholson 44” A-2 Debarker EDGERS & GANGS Pendu Double Arbor Gang Schurman Late 4” x 36” Shifting

OVER 13 ACRES

OF

TMT Chipping Edger Schurman 6TA48 Combination Ukiah 6” x 48” Gang Edger Schurman 12” Double Arbor Gang FILING ROOM EQUIPMENT Vollmer Cana E (8) Wright Mod. 1801 (3) Weinig R 934 Profile Grinder Erma 71” Mag Bed Grinder Newman G-200 Grinders Hanchett Knife Grinders (10) Wright W-1600 Auto Tipper Wright W-150 MSM Top & Face Armstrong No. 90 Equalizer Armstrong Dual Side Grinder Armstrong Side Pro Newman G-20 Rotary Armstrong No. 4 RH B.S. Grinder Armstrong No. 25 Circle Hanchett DN-40 Knife Grinder Armstrong No. 4 LH B.S. Grinder Armstrong No. 4 B.S. Stretcher Roll HOGS & PULVERIZERS

Jeffrey 36 x 60 Shredder Jacobson Horizontal Hog Zeno Low-Noise Grinder West Salem Big Brute Grinder Jacobson Hammer Mill W. Salem 52” Horizontal Grinder Jeffrey 56 WB Hammer Hog Lamb HX 750 Hammer Hog Kimwood Rotary Hog Jeffrey 76WBH Horiz. Hog Gruendler 50XE Hammer Hog MISCELLANEOUS Dog Ear Machine Smith Twin Horizontal Resaw Globe Strip Saw Morbark Stac Trac, NEW Mereen Johnson 424DC Ripsaw Industrial 3496 Finger Jointer Industrial FJS-25 Finger J. System Hurricane 28” Chop Saw Fruilmac End Matcher

(4) Peerless 24-Unit Bins Peerless Trailer Dumper Samuels Plastic Strapper (1) 60-Unit Peerless Bin L&M Log Cut-Off Saws Timesaver Sanders (6) Lumber Stackers (3) Irvington 20’ Trimmer, 1’ Saws Mereen-Johnson 48” Ripsaw Sullair V-200TS Compressor 5-Arm Hyd. Tilt Hoist Sticker Recovery System Irvington Planer Trimmers PLANERS & MOULDERS Weinig Hydromat 23 Weinig Powermat 2000 Stetson-Ross Timber Sizer Weinig Powermat 2000 Mattison 226 12” Moulder Mattison 228 16” Moulder Diehl 6-head TF Moulder Buss 55 Double Surfacer Buss 88 Double Surfacer Wadkin 6-Head Moulder Yates A-20 10-Knife Weinig U22A, 6-head Wadkin 7-Head Moulder Newman M-990H 20-Knife Newman 382 Double Surfacer Newman M712 12-Knife S-R 6-10-A1 10-Knife Coastal 24” 20-knife Planer S-R 6-14-D1 24” 16-Knife S-R Chip Blankers Weiniig P22N 5-Head RESAWS McDonough 54” Twin Horizontal 36” Tri-State Tilting Resaw Turner 48” Rollfeed Resaw Turner 52” Rollfeed Resaw Salem 6’ Horiz. Air Strain Kockums 6’ Horiz. Twin Air Strain McDonough 62” Linebar Resaw

WE ARE PARTING OUT

Woods Planers 412M, 414M, 407M, 409M. 415M Woods Moulder 132M Yates Planers A-20, A-62, A-66 Stetson-Ross Planers 6-12-A1, 6-12-C1, 6-10-A1, 6-14-D1 Mattison Moulders 276, 226, 228 SAVE BIG ON MOTORS AND MAJOR PARTS!

GREAT BUYS ON USED EQUIPMENT!

For complete equipment list, visit our website:

www.machinerysales.com

OR CALL AND ASK FOR DEPT. LX

( 8 6 6) 241-2977

1979 JD 440C Cable Skidder Rebuilt Deere 4 cyl. engine; Manual Transmission, Bodygood, open cab w/ ROPS, dozer blade, diff locks, winch with cable; Tires - 16.9 x 30 4@30%; Hour meter shows 3400.

Color - Yellow. VIN #: 440C334150T Item ID: 12091 Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com length the 1 head is 2’6” from the end of the carriage to the center of the hea 2005 Timberharvester Sawmill Purchased new in December 2005, has 1550 hrs, powered by a 47-hp Lombardini diesel, log debarker, computer setworks, can cut up to a 36”x21’ log. Stored and run inside. - Item ID-11584 - Michelle 800.315.9950 x606 2008 Mighty Mite Mark IVB Portable Sawmill - Bandsaw Sawmill. Perkins 37hp Diesel Motor. Hour Meter Reads: 49.5. S/N: B4B0637 with 2007 Mighty Mite Mark IVB 40’ Trailer, VIN: 1M9SB40237P538637 - Item ID11996 - Michelle 800.315.9950 x606 56” Circular Sawmill - Runs 8’ to 28’ long saws up to 36” wide. Is PTO powered, currently running off 80hp tractor. - Item ID-10802 - Michelle 800.315.9950 x606 Complete Circle Mill/top saw/resaw/ edger/all transfers - Complete sawmill helle carriage with top-saw; infeed deck; edger; McDonough resaw; Cat Gen-set; all transfer equipment. Circle saws and related equipment. All electrical switches included in sale. Buyer is responsible for removal. - Item ID11656 - Daren 800.315.9950 x603 Complete Plywood Mill - sold - Item ID-10797 - Michelle 800.315.9950 x606 Complete Select Sawmill - 6” double cut bandmill. Can produce 15,000 to 20,000 board feet per day. Mill has 1500 hrs. Comes with 48 extra blades worth $10,000.00. Also includes a debarker with 840 hrs.

Both purchased new by current owner. Price new without the extra blades is $160,000 - Item ID-10782 -

1987 CAT D4H TSK w/Winch and Forestry Package Item ID: 12026 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com Michelle 800.315.9950 x606 Comptete Operating Sawmill 1-HMC 30 ft. 4-Strand Log Deck with stop and loader. 2-HMC V2110 Slant Track Debarker - 24 ft. capacity Cornell Bark Conveyor – 40 ft.Debarker control cab 3-40 ft Hour Glass Rollcase. 4-30 ft. Heavy Duty Log Deck with stop and loader.

HMC log turner (chain) up and down. 5-Lane Tech Heavy Duty 536 4-Head Block Carriage. 5 axles with 12” wheels.3 Cant turners.

6-Heavy Duty Modular Track System capable of sawing 24 ft. 7-Head Rig-48” main saw with 150 Hp-36” top saw with 75 HP-Off bearer beltOver-sized booth with o heat and air-Silver Tech set works.8. 75 HP Hydro Static feed for carriage with cooler. 9. Mellot 24 ft retractable Roll Case with 8” spiral rolls and 2 pop up transfer rolls. 10. Mellot 24 ft Roll Case with 8” smooth rolls. 11.

Mellot 8 ft. 4-Strand Transfer Deck to Edger with stop. 12. Lane Tech combination Edger Resaw with 75 HP motor.2 – 18” blades, center split with Silver Tech setworks. Infeed table- Cant transfer chains to resaw.

2 Carter laser site lines. 13. Lane Tech Resaw 42” circle saw. Line Bar with Manual set work from 0.5” to 8”. 2 side arm rolls plus top back rolls – all powered. 14. Mellot 20 ft.

Self-tailing Out Feed Belt. 15. Mellot 20 ft. Split Out Feed with 8” rolls and pop up stop. Merry go around.

16. Mellot 4-Strand with square lugs. 17. Mellot 22 ft. Belt Conveyor.

18. Mellot 4-Strand 14ft (roof top chain) Deck with Hyd. stops. 19.

Cornell 2-24” saws – auto Set works from 4ft. to 20 ft. in 1 ft. increments.

20. Mellot 40 ft. 4-Strand Lumber Deck. 21. 2-Strand Lumber Deck 24 ft. 22. 100 gal Hyd Pump Tank with solenoids for deck functions.

23. Dayton 10HP Air Compressor, 3 Phase. 24. Emglo 5 HP 230 Volt, 1 Phase. 25. Cat Generator – 3412 Engine, 550 KW – Serial # 81Z23731.

26. 48” 3-Knife Morbark Chippac with 15 HP Trailer Loading Blower.

27. Mellot 24 ft. Vibrating Conveyor.

28. Webster 50 ft. 8” sides Vibrating Conveyor with Saw Dust Section.

LATE 70’S

230 Timberjack Forwarder Item ID: 11993 Contact: Michelle 800.315.9950 Ext. 606 www.LBXonline.com 29. Rens Metal Detector in Webster Vibrating Conveyor. 30. Saw Laser Lite for Head. 31. Misc Blades and Parts for various machines. 32.

Electrical panels. 33. Saw Motors.

More pictures available upon request. Thanks for looking. Out put 35,000 bf in one 8 hour shift. - Item ID-11774 - Daren 800.315.9950 x603

‘78 Timberjack 225 Item ID: 12031 Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com Jackson Harvester Sawmill - 3 headblock carriage, 2 saw vertical edger, Mudata setworks, log turner, sawcab, almost new feedworks!!!!

2 strand live deck, Husk, newer sawcab outfeed belt. Can be bought as package or individual pieces! Can be seen running. Right handed. Item ID-11313 - Daren 800.315.9950

Contact Us for Your Equipment Needs. If we don't have it, we can find it!

304.872.2988 06 John Deere 650J - Closed cab with heat and air, new undercarriage, 85% on tracks, forestry package, new paint, showing 3,114 hrs. ................... $58,500

40-%

00 John Deere 650H - 6-way hydraulic blade, forestry package, undercarriage fair, new injector pump, showing 9,975 hrs. .... ............................................. $39,500 01 Timco 425D Feller Buncher - Rebuilt motor, 80% on tracks and undercarriage, 33 inch bar saw with laterial tilt head, showing 7,100 hrs. ............................... $105,000 96 John Deere 750C - D6 Berco undercarriage, 6-way hydraulic blade, forestry package, new track pads and paint, showing 8,127 hrs., in excellent shape $30,000 81 John Deere 850 - 12ft 6 way hydraulic blade, forestry package, 65% on tracks and undercarriage, showing 6,267 hrs. ............................................................... $14,000 88 John Deere 550G - 6-way hydraulic blade, forestry package, 70% on tracks and undercarriage, showing 7,185 hrs. ............................................................... $21,500 98 Husky Brute XL 175 with CRT Bucksaw - Cummings 6 BT, continous turn grapple, on a Pitts pintel hook trailer .. ..................................................................... $27,500

For Classifieds Call Your LBX REP at 1-800-315-9950

The Original Lumberman’s Exchange n 9

<=>?,7@A(B<>)7?@C HUGE AUCTION IN HOUSTON ?@!7@9(?@!D(B<>)7?@ !"#$%&'()%*+,(-.*%#"&.

ONSITE AUCTION WITH

/%&0.1'(2343563*(7+,(.+(89:99.5( SIMULTANEOUS WEBCAST +%(;,<*$0.1'(2343563*(=+,(.+(8>:99?5 Hjgeajh id i]Z Dc\d^c\ CZZYh d[ · Huge Qty. of Door Manf Equipment

LOCATION: ?@!7@9(?@!D(B<>)7?@ 6aa EVc AI9 @.$(A3B.$'()3C.0. ('' G^aZn GdVY! =djhidc! IZmVh ,,%),

1992 Bell Super T Item ID: 11898 Contact: Michelle 800.315.9950 Ext. 606 www.LBXonline.com

23+."#$(-%5"&B(D%%&E

DATE AND TIME:

I]jghYVn! ?VcjVgn &(i]

4<A9(EF2BD(?@C7)9(B<>)7?@ ./%% V#b# 8ZcigVa I^bZ F%<$+%&'(;3G.$ PREVIEW INSPECTION: 23+."#$(-%5"&B(D%%&E Hundreds of Hollow Core Door Slabs

LZYcZhYVn! ?VcjVgn &'i] ./%% V#b# id */%% e#b# 8ZcigVa I^bZ

>5..(GHIIJ(KLIFHMEN(-&(O*3*8(<3(?0.*0%(58

FEATURED EQUIPMENT: 666P>Q5&.%38-0B"R8*-03PR-#

Large Quantities of Steel Building Materials

Building Materials, Truss Joist, Moulding & Casing, Sheeting, 2x4, 2x6, 2x10 Lumber; Door Manufacturing Equipment, Routers, Table Saws, Air Compressors, I-Joist Machines, Mitre & Dbl Mitre Saws, Radial Arm Saws; Huge Inventory of Doors, Interior & Exterior Door Slabs & Prehung Doors, Hardware Inventory, Steel Doors, Bifold Doors, Door Glass Inserts

Call (877) 357-8124 or View Catalog Online at www.CharlestonAuctions.com x603 Meadows #2 Sawmill - Meadows #2 carriage - 15’ OAL with 4 headblocks - 3 hydraulic dogs - 5 axles, hydraulic setworks with pantograph arm assembly to carry hydraulic & electric lines from carriage to husk clock face lumber dial - controls for setworks & dogs. Meadows #2 track frame, with idler assembly. Reckart hydraulic feed package with 40-hp electric motor. Mellott log turner. 35’ log deck with stop & load. 130KW generator. - Item ID-11086 - Michelle 800.315.9950 x606 Sawmill With Chipper - Carthage carriage, helle sawmill and chipper - Item ID-11992 - Michelle 800.315.9950 x606

CONVEYORS

Hurst Conveyor - Heavy duty material handling conveyor.

Manufactured in 1994. Catwalk.

Cleated 4’ wide belt. 100’ overall length. - Item ID-10821 - Michelle 800.315.9950 x606 Webster Vibrating Conveyor - 90’ Webster Virbrating conveyor one

10 n

January 2011

drive section one fiberglass section 12” botom - Item ID-11760 - Michelle 800.315.9950 x606

DEBARKERS

Mellott Debarker with 648 Rosser Head - Late 90’s. either 1997 or 1998. 20’ 3 strand log deck stop and load with Mellot 40’ log trough.

Dual kickers and Cornell barn sweep. - Item ID-11668 - Michelle 800.315.9950 x606 Precision 636 Debarker - Flat track debarker with Mellott 20’ deck. - Item ID-11683 - Michelle 800.315.9950 x606

EDGERS & GANGS

6” Edger - Edminston hydraulic edger. Early 2000. with electric motor. Has a 40-hp, 60 hz. - Item ID10864 - Michelle 800.315.9950 x606 Meadows 7” X 48” Combination edger - Serial # T7-1738-99. Was once used with a shifting saw. Some, but not all of the parts for this are present. There are three 23” split strob saws. There is an integrel hydraulic system on this machine.

8’ outfeed. 10’ infeed with hydraulic

roller holdover and two air popup pushover chains. Remote operator station. Hydraulic press roll lifter.

Main shaft is 2-15/16”. There is no main motor present. There is a mast for shifting lasers but the system is not complete. Footprint of unit: 7’ X 22’ - Item ID-11733 - Michelle 800.315.9950 x606 Meadows Deluxe Edger - 4”x36”.

Very little use, in very good condition. Has a pulley system to run it. 3 interchangeable blades. - Item ID-10900 - Michelle 800.315.9950 x606 Miner Edger - 40 HP Electric motor, 4” x 32” capacity, up to (4) blades, 7’ Infeed, 8’ outfeed - Item ID-10789 Tom 800.315.9950 x604 Ogam chain drive open arm gangsaw. - 2 Main drive motors included. 10 HP and 30 HP. - Item ID11744 - Michelle 800.315.9950 x606 Salem 3-Saw Edger - 60-hp motor, 4” X 48” capacity, 9’ infeed table, 17’ long picker outfeed table, hydraulic blade shift. 1990 model - Item ID10852 - Michelle 800.315.9950 x606

1984 John Deere 640D Cable Skidder NEW TRANSMISSION; John Deere 6cyl Diesel Engine; 30.5 x 32 tires at 70%. Great flotation. Winch works well; Runs good. VIN #: 640DC513656 NC Item ID: 12092 Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com Schurman 4” Top arbor edger “Super Heavy Duty” would be an understated description of this machine. It features 50 HP on the arbor and a separate motor for the feed. There are 3 air shifting carbide saws in the 23” wide feed throat.

6 bottom and two top feed rolls.

All powered. The top rolls have air lifts. All feed rolls as well as the saw portion of the arbor are chrome plated. A very well engineered, heavily built machine. - Item ID11763 - Daren 800.315.9950 x603 Timberking Talon 900 Edger Powered by 220 volt, 3 phase electric, 15-hp motor. Has a 21” opening. Been used and stored inside a warehouse and never exposed to the elements. - Item ID11560 - Michelle 800.315.9950 x606 Vertical edger for RH mill - 50 HP, 20” F saws with carbide bits, solenoid valves, splined arbor.

Good looking edger. - Item ID-11781 Daren 800.315.9950 x603

Visit us online at www.LBXonline.com!

PUBLIC AUCTION 9A'5L9L5<5!''M''9A'0(!(0N(!O

!"#

1989 CAT D5H TSK

!"#$%&'!$()"*'!$(+*",#-$!

Item ID: 12029 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com

!"#$%&&'()*%+$,-./'0,"&'(1.".,

2345'6'7(89(!84:'6';49<40:'2= !"#$%#&'()*+',-#./01+'203-0"1'4(

>?@@'7'A&B'C#D'EE/'41F'GHIJ/'4K 5-67%83'78'9#':#;/'<==.%7#')'>?-%@A#37'B8;/'C%0'B;%/#

1988 Mack RW713 Day Cab Log Truck Item ID: 12000 Contact: Michelle 800.315.9950 Ext. 606

www.LBXonline.com

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`"A07%83W''

]%/';%$#'8"'9%/'83;%3#'&%7U'MurphyLIVE!' 4Qa']-1#".'!"#A%-A

K5II'T<G'5b'LIIOB,G5,>F']G<K:OG>

James G. Murphy Inc. Commercial & Industrial Auctioneers

1991 TIMBERJACK 450B Item ID: 12036 Contact: Michelle 800.315.9950 Ext. 606 www.LBXonline.com FIREWOOD PROCESSORS

2005 2040xp2 + 30’ Conveyor - 2005 2040xp2 firewood processor, 80 hp John Deere Diesel, 30’ Conveyor, 2-strand roller chain, hydraulic lift, 40’ long, 20” log capacity, 8-way wedge, 3,300 hrs 5th strand live deck arm for processing blocks as short as 24” (normally a $2,000 option), Very Well Maintained Heated Operator Cabin, Pilot Electric/Hydraulic Joysticks Safety Seat, Clean Out Pan Option

18226 68th Ave NE, Kenmore, WA 98028

1.800.426.3008 - 425.486.1246

murphyauction.com (normally $1,000 option - Item ID11871 - Daren 800.315.9950 x603 2005 Built-Rite model 50 SCP processor - Includes Auto log stop, 3 strand live deck, 4 1/2” cylinder, cab with heat & A/C, 750 hrs, 68 HP Kubota diesel - Item ID-11619 - Daren 800.315.9950 x603 2005 Cord King Firewood Proccessor - 900 hrs, with 30 ft. conveyor - Item ID-12027 - Daren 800.315.9950 x603 2006 MULTITEK 2020CSC - One owner, ‘06 Multitek 2020CSC firewood processor with a 2.4 L 66hp John Deere Engine, with 2000 hrs, unit is an all in one including loading deck and conveyor, heated

cab, and lights, 3/4” pinch saw chain, conveyor extension for loading semi-trailers. - Item ID-11900 - Daren 800.315.9950 x603 2006 Timber Wolf Firewood Processor with 26’ conveyor - 1750 Hrs, auto cycle, operator cab, - Item ID-12020 - Daren 800.315.9950 x603 2007Hakki Pete 1x37 EZ - 6 hrs, Auto Feed. 4 Way Splitter. Loading Conveyor - Item ID-11865 - Daren 800.315.9950 x603 2008 Wood Beaver Hakki 1x37 Firewood Processor - 2008. powered by a 24-hp Honda gas engine.

Includes a log deck. Less than 100 hrs. - Item ID-11659 - Michelle 800.315.9950 x606

For Classifieds Call Your LBX REP at 1-800-315-9950

Best Value Portable Log Splitter Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift.

Uses 4-way wedge adjustable to single two way. Great Value! PA Item ID-12062 - Tom 800.315.9950 x604 Empire Firewood Processor (now is Cord King) - 2002 Empire firewood processor with low hrs.

42” circle saw, 3 strand live deck that accepts log that are 25’ long and 22” in diameter. Powered by an 80-hp Cummins diesel. Less than 400 hrs. 30’ conveyor is included.

The Original Lumberman’s Exchange n 11

/&&%4 50 (0 "4"1

1998 Cargo Walking Trailer

1997 Morbark 1200 Tub Grinder

45 ft. x 102 in.

Item ID: 11998 Contact: Michelle 800.315.9950 Ext. 606 www.LBXonline.com

Item ID: 12035 Contact: Michelle 800.315.9950 Ext. 606

www.LBXonline.com Has tandem axle, pintle hitch and produces 4 cords per hour. Ready to tow home and get to work. - Item ID11980 - Michelle 800.315.9950 x606 HAKKI PETE 1X37 Firewood Processor - Manual Set-Up, 4 & 6 Way Wedge, 3 Extra Bars, 6 Extra Chains, Converted to Rim Sprocket, Hydraulic Log Lift, Serial #4702-5 includes a John Deere 850 Power Unit - Item ID-11694 - Daren 800.315.9950 x603 Simplex Chomper 14 - Chomper firewood processor , model simplex

14 , will handle logs up to 14 “ in diameter unlimited length . Can do one cord in approx 1 1/2 hrs with one man , cut split and ready to go . Uses a hydraulic shear instead of a saw so no sharpening , can split two or four ways. In Maine - Item ID11707 - Michelle 800.315.9950 x606 TIMBERWOLF Pro-HD XL Inline Firewood Processor - 80hp John Deere, Auto cycle, 8 way wedge, 16’ live deck, Cuts & splits up to 3 cords/hour, This machine was a demo unit and has very low hrs.

Also includes a partial factory warranty - Item ID-12013 - Michelle

Save Your Stubs & Pieces!

1992 John Deere 644E Wheel Loader Item ID: 12034 Contact: Michelle 800.315.9950 Ext. 606

www.LBXonline.com 800.315.9950 x606

FORKLIFTS

1995 Nissan Forklift - 15,500 lb Capacity, Model: DF05N70V, Diesel, Pneumatic, Side Shift, 2-Stage Mast, 177 Max Mast Height, Hour Meter Reads: 8,224, S/N: 001800 - Item ID11892 - Michelle 800.315.9950 x606 2000 Hyster H155XL Forklift - 15,000 lb Capacity, LP Gas, Rough Terrain, Pneumatic, Tilt, Side Shift, 2-Stage Mast, 173.2 Max Height, Hour Meter Reads: 3,938, S/N: F006D05789X - Item ID-11893 - Michelle 800.315.9950 x606 2004 Moffett Model M5500 Truck

1990 Ford A64 Wheel Loader Item ID: 12032 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com Mounted Forklift - 1418 Hrs; Kubota Diesel; 4’ Forks, Side shift, 4 Way steer, 12’ Mast, Tires Front 31.5X1316.5, Rear 31X15.5-15. If you deliver products on a truck, this forklift goes with you. Top brand in the industry. Priced to sell. - Item ID12069 - Tom 800.315.9950 x604 4500 Masse Ferguson Forklift Powered by a 3-cylinder Perkins diesel engine (completely rebuilt).

Almost new tires, 4’ forks, lift is 10’ high and has a 2 stage mast.

Is hydro-static. - Item ID-10768 Michelle 800.315.9950 x606 Case 586C Forklift - Forklift with

Our newest color—Light Blue

➨

Let us reprocess them $25 per 100 Now have Factory Seconds $25 per 100 sticks

12 n

January 2011

Visit us online at www.LBXonline.com!

OUR

BIOMASS

For fuel wood production, nothing is built stronger and lasts longer than a Bandit whole tree chipper. Our unique machines quickly and efficiently convert whole trees into dimensional chips. Now featuring eight high-powered machines to maximize productivity.

CHIPPERS

TAKE YOU FROM

FOREST TO FUEL. SAVE BIG ON USED

‘07 Bandit Model 2090 John Deere 325-HP Hydraulic Swivel Auto Feed.

$89,995.00

& REFURBISHED EQUIPMENT

‘08 Bandit Model 3590 Cummins 700-HP. HP600 Twin Disc Clutch. Reversing Fan. Babitted Knives.

$340,000.00

‘06 Beast Model 3680

‘03 Beast Model 3680

CAT 700-HP. Reversing Fan. Fifth Wheel Hitch.

CAT 565-HP. Radio Remote.

Magnetic head pulley.

$295,000.00

$240,000.00

Email: sales@banditchippers.com

GREAT BUY! ‘06 Bandit Model 4090

CAT 1000-HP. Prentice Loader. Deluxe Operator’s Cab. Refurbished. New Paint Job.

$440,000.00

Online: http://www.banditchippers.com

1-800-952-0178

LumbermansExchange-1110.indd 1

10/21/10 10:05:28 AM

LumbermansExchange-1110.indd 1

10/21/10 10:05:28 AM

9000 hrs. - Item ID-11994 - Michelle 800.315.9950 x606 75KW Diesel Turbo Generator 770 hrs on it. w/ a hercules Deisel Engine & right now itâ&#x20AC;&#x2122;s wired for 3 phase. No fuel tank underneath it, it was a platform. Very good Condition! - Item ID-10491 - Tom 800.315.9950 x604

HOGS/WOODGRINDERS

1995 Simonds

Automatic Bandsaw Leveler Excellent Condition. Will improve cutting accuracy, filing room safety, saw life, leveling quality and filing room productivity. The paybacks from automatic leveling - less deviation, kerf reductions, and simplified saw maintenance. Great value and a smart investment!

Item ID: ?

Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

50IN Capacity Wood Hog with Conveyor - 50 Capacity Wood Hog, Equipped with 90â&#x20AC;&#x2122; Vibratory Conveyor and 40â&#x20AC;&#x2122; Belt Conveyor, Transformer Included - Item ID12018 - Michelle 800.315.9950 x606

1988 Clark 666 Grapple Skidder

KNIFE GRINDERS

Hanchett Band Sharpener Sharpener with stretcher and shaver - Item ID-11601 - Michelle 800.315.9950 x606 Hanchett Circular saw grinder This circular saw grinder appears to be capable of grinding up to a 36â&#x20AC;? diameter saw. Plate info: Size 724. Serial # 8109 - Item ID-11746 Michelle 800.315.9950 x606 Schneider Pattern Knife Grinder - Item ID-11743 - Michelle 800.315.9950 x606

Hours unavailable, 30.5 tires-front at 40%, rear at 20%. Runs good.

Single arch grapple.

Good back up skidder.

Great price.

Item ID: 12088 Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com

LOG BOOM CRANES

good rubber, good brakes and runs good. Has side shift. 1982. Case 4-cylinder. ITEM IS SOLD!!!! - Item ID11457 - Michelle 800.315.9950 x606 Hyster Forklift - 2WD, LPG, Pneumatic Tires, Est 8000LB Capacity, Sideshift, ROP, Hrs Shown As 3451. - Item ID-12002 - Michelle 800.315.9950 x606

GENERATORS

350 KVA Cummins - Genset with

1984 BARKO 80BC - Log loader, includes the International truck, sn#15298 - Item ID-11428 - Daren 800.315.9950 x603

LOG TURNERS

2 Strand Deck - 16â&#x20AC;&#x2122; long. 70â&#x20AC;? c to c 2-strand deck. Elecric Drive. Has front side singulator. - Item ID-11782 - Daren 800.315.9950 x603 Log deck headframe with Mellott chain turner. - Deck is intended for

a RH mill. Chain spacing as viewed from carriage Right to Left: 0â&#x20AC;?-60â&#x20AC;?118â&#x20AC;?. Turner is at 45â&#x20AC;?. Stop & Loader and deck drive shaft are 2-7/16â&#x20AC;?.

Gearmotor is 3 HP (3 phase) with #100 Roller chain drive. Unit size: Length-132â&#x20AC;? Width-77â&#x20AC;? height-64â&#x20AC;?.

Sprockets are 1â&#x20AC;? wide at tooth area.

12 tooth. 2-5/8â&#x20AC;? spacing. Would work for H-78 chain. - Item ID-11778 Daren 800.315.9950 x603 Mellot log turner & Hydraulic system - The Mellot Log Turner Comes With With Joystick Control Valve And Hydraulic System. - Item ID-11752 - Daren 800.315.9950 x603

LOGGING EQUIPMENT

1969 Fiat Allis articulating loader - 1969 Fiat Allis articulating loader with Log Forks Needs fuel tank cleaned out but works otherwise Item ID-11437 - Daren 800.315.9950 x603 1974 BARKO 160 Knuckleboom Loader Log Loaders/Stackers - 1974 BARKO 160 Knuckleboom Loader Log Loaders/Stackers, Detroit engine, mounted on IH truck, with Barko 42 grapple - Item ID-11979 Daren 800.315.9950 x603 1978 CAT 518 Grapple Skidder 23.1x26 Tires, tires 40%, Gearmatic Winch & Esco Grapple, Center Pins are tight - Item ID-11800 - Daren 800.315.9950 x603 1978 TIMBERJACK 225, DETROIT POWER-MANUAL SHIFT, Tires are 50%, Due to age of machine ares are unknown - Item ID-12031 - Daren 800.315.9950 x603 1979 JD 440C Cable Skidder Rebuilt Deere 4 cyl. engine; Manual Transmission, Body- good, open cab

A Powerful High Production Circle Saw Processor â&#x20AC;&#x201D; WITHOUT THE HIGH PRICE TAG!

Introducing the All New Rapido Loco Junior THE RAPIDO LOCO JUNIOR FEATURES:

Simple Controls & Push Button Splitting

Circular Saw Saves on Maintenance

50 BHP CAT Power â&#x20AC;&#x201D; STANDARD!

;

.3&24&% "2#*%& //4) *2$5,"2 ,"%& '/2 '"34 $543 ".% &"3& /' -"*.4&.".$& ;

*&3&, /7&2 ,".4 0543 4/ 7/2+ '/2 ! ; 9 /,%*.( *6& &$+ *3 &"68 548 '/2 ,/.( ,*'& 15*$+ 3&4 50 ".% *.$2&"3&% 02/%5$4*/. ; "8 &%(& (*6&3 8/5 '"34 ".% "$$52"4& 30,*44*.( ; &24*: &% 2"*,&2 "$+"(& '/2 3"'& &"38 42".30/24"4*/. 4/ 4)& 7//% ; 9 /7&2&% /.6&8/2 $543 8/52 ,"#/2 $/343 < 3*(.*: $".4,8 ; &$/.% ,/$+ 4/ ,/$+ 8$,& *-& ; &3*(.&% '/2 /(3 50 40 %*"-&4&2 4)& "0*%/ /$/ 5.*/2 %&,*6&23 50 4/

/2%3 0&2 )/52

These Features â&#x20AC;&#x201D; ALL STANDARD! â&#x20AC;&#x201D; Not Expensive Upgrades!

The All New Rapido Loco Junior at the Low Introductory Price of ork â&#x20AC;&#x201D; Designed to W D ON! KE NOT TO BE WOR

Giving You More For Less Is The Woodbine Way. Call 888-667-8580 now to learn more!

17 Hyde Hill Road, Williamsburg, MA 01096 www.crdmetalworks.com Email: sales@crdmetalworks.co

14 n

January 2011

ONLY $42,900 Until April 1st, 2011

Visit our website '/2 4)& &7&34 *%&/ /' )& "0*%/ /$/ 5.*/2 )& 2/: 4"#,& "0*%/ /$/ *.&50

Coming SoChoainns!aw

20 Woodbine Pro rcle Blade & Loco 20llCiNo w Ca re Info. for Specs & Mo

Firewood Processors Performance, Power & Proď&#x192;&#x17E;t

Visit us online at www.LBXonline.com!

‘92 Ford L8000 1998 Prentice 310E Item ID: 12033 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com

2007 Cooks Portable Sawmill

w/1996 Series XL235E LX235E Log Loader

Item ID: 12025 Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com

w/Portable Edger

1997 CAT D5H TSKII

Item ID: 12016 Contact: Michelle 800.315.9950 Ext. 606

Item ID: 12012 Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com w/ ROPS, dozer blade, diff locks, winch with cable; Tires - 16.9 x 30 4@30%; Hour meter shows 3400.

Color - Yellow. VIN #: 440C334150T - Item ID-12091 - Tom 800.315.9950 x604 1980 DEERE 540B Grapple skidder, Swinging Grapple, winch, front tires are 70% and rears are 85% or better, new batteries and a new seat. - Item ID-12010 - Daren 800.315.9950 x603 1981 (est) Clark 666 Cable Skidder - Unknown hrs; Many recent improvements - New 6BT8.3 Cummins with 1500 hrs; New Service Brake; New Parking Brake; 23.1 x 26 tires at 50%; Runs good; Very strong power train. - Item ID12054 - Tom 800.315.9950 x604 1982 540B Grapple Skidder, New engine and Transmission 2000 hrs on both, bottom center pin is new, top has a little wear, tires are at 40% power shift Transmission. Pictures are coming soon - Item ID-11569 Daren 800.315.9950 x603 1984 DEERE 540B cable skidder, New 23x126 tires on rear. 8000 hrs - Item ID-11875 - Daren 800.315.9950 x603 1984 DEERE 540B - cable skidder, 20,000# winch capacity, 7 ft blade, articulating, 4 cyl JD turbo dsl @ 90 hp, powershift 6 fwd/3 rev, 7 ft blade, 18,700# machine, 20,900# capacity front tires 50% reares 30% - Item ID-11566 - Daren 800.315.9950

www.LBXonline.com x603 1984 John Deere 640D Cable Skidder - NEW TRANSMISSION; John Deere 6cyl Diesel Engine; 30.5 x 32 tires at 70%. Great flotation.

Winch works well; Runs good. VIN #: 640DC513656 NC - Item ID-12092 Tom 800.315.9950 x604 1985 Treefarmer C6E Grapple Grapple, winch, complete overhaul 500 hrs ago, 453 Detroit, powershift transmission, 28x26 tires are 50%, rebuilt grapple and arm cylinders, all worn hoses replaced. Winch needs shaft. - Item ID-11296 - Daren 800.315.9950 x603 1987 FORD L9000 - TWO BUNK OR 4 SETS OF BOSTERS, 366,000 mile, vin#A55219 tri axle, Cat 3406 diesel engine, 8LL transmission and 370 rears, prentice 120c - Item ID-11844 Daren 800.315.9950 x603 1988 Clark 666 Grapple Skidder Hrs unavailable, 30.5 tires-front at 40%, rear at 20%. Runs good. Single arch grapple - Item ID-12088 - Tom 800.315.9950 x604 1988 DEERE 648D - Front tire are 70% rear are 50%, Machine runs good - Item ID-11432 - Daren 800.315.9950 x603 1988 FORD L9000 - 425 hp Caterpillar engine, 702,000 miles, 10 Spd transmission, air ride suspension, with a Prentice knuckleboom loader - Item ID-11846 - Daren 800.315.9950 x603

When You Buy Your Circular Saws From B.H. Payne You’ve Bought the best... We Guarantee It! Traditional Quality Combined With Todays Technology Quality Brand Reg. U.S. Pat Off

Circular Saws Saw Bits and Shanks Circular Knives Carbide Tipped Saws Carbide Strobe ® Saws B.H. Payne & Company Saw Manufacturers

Call 800 752-0627

Make Sure To Ask For Our Free, Complete Saw Catalog We Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels, Knife Grinding Wheels, Saw Gumming Wheels & Knives.

Here’s What You Get With Every B.H. Payne Saw • Saws manufactured from only the Highest Quality Nickel Alloy Steel.

• Each Saw Milled with State-Of-The-Art Precision CNC Milling Machine.

• We Tension Your Saw to Your RPM Speed BEFORE Leaving Our Factory.

• Your Satisfaction - Completely Guaranteed.

B.H. Payne & Company, Inc. P.O. Box 90608 East Point, GA 30364 404 761-8711 Fax 404 761-5398 “Since 1890” E-mail: info@paynesaws.com

For Classifieds Call Your LBX REP at 1-800-315-9950

Web Site: www.paynesaws.com

The Original Lumberman’s Exchange n 15

1996 511EX Hydro-Ax w/Bunching Saw Head Approx. 6800 hrs. Only 200 hours on factory reconditioned hydraulic motors and pumps.

Comfort cab with working air. 28L tires with chains at 50%. Saw head has side pocket for cutting larger trees. Very well maintained machine.

Good price on strong machine.

Item ID: 12072 Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com

2001 Fastline Gator 128 Band Resaw Item ID: 12023 Contact: Michelle 800.315.9950 Ext. 606 www.LBXonline.com

Mereen-Johnson 431-DC Gang Rip Saw w/ Laser Item ID: 12019 Contact: Michelle 800.315.9950 Ext. 606

www.LBXonline.com

2005 CAT 525B Grapple Skidder Item ID: 12028 Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com 1988 GMC Topkick Log Truck - With Prentice loader. 3208 Cat diesel, air brakes and runs good. - Item ID10920 - Michelle 800.315.9950 x606 1989 CAT D5H TSK, WITH WINCH & FAIRLEED-GOOD PAINT-GOOD SHAPE, 6-Way - Item ID-12029 - Daren 800.315.9950 x603 1990 FORD A64 Wheel Loader with forks, - Item ID-12032 - Daren 800.315.9950 x603 1991 Cat 518 grapple skidder All belly pans and sheet metal were removed so the machine could be steam cleaned. All the cylinders have been packed. The radiator is rebuilt with new tanks. New starter has been installed. A couple of new

16 n

January 2011

‘00 Daewoo w/Denharco DM3500 Stroke Delimber Item ID: 12026 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com guages were installed. New hinge pins and steering pins installed. All filters and fluids have been changed.

Many hoses have been replaced.

Winch has been rebuilt. Brakes work good. New exhaust muffler and pipe installed. Tires have about 35% tread. Seat is in good condition. New paint and decals. - Item ID-11832 Michelle 800.315.9950 x606 1991 Hydro Ax 221 hour meter broken good tread good running condition includes bush hog attachment - Item ID-11769 Michelle 800.315.9950 x606 1991 Hydro Ax 221 John Deere, 4-cylinder Koehring 18” high speed disc saw 28L x 26 tires enclosed cab

2001 CAT D5H TSK II Grapple & Winch Item ID: 12083 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com with heat and air - Item ID-11770 Michelle 800.315.9950 x606 1991 Timberjack 450B - SN:CI-2759, Hour Meter Reads 4652.5, Cumings Diesel, 7’ Blade, Winch, Grapple - Item ID-12036 - Michelle 800.315.9950 x606 1992 Ford L8000 with a 1996 Series XL235E Log Loader - 1992 Ford L8000, Serial # 1FDYW82A8NVA07578, TK Body Style, 307,000 miles, 225 hp, 7 speed Transmission, a/c, 410 gear ratio, hendrickson suspension 1996 Series XL235E Log Loader, new complete engine, 116 hp, 42” Log Grapple, Item ID-12025 - Daren 800.315.9950

x603 1992 GMC Truck with 1996 HM38 Production Drill - 29’ Drill Depth – Less than 200 hrs since replacement of Bar & Barrell; 3” Kelly Bar; Funk 12,000 transmission – Less than 50 hrs since rebuilt; Ford CSG 300 gasoline Engine; Rebuilt V-70 valve; Less than 100 hrs; Rebuilt Hydraulic Pump Less than 100 hrs; Reinforced Table; Mechanical drive & Hydraulic bar; 18” Ring Gear Torques to 42,000 ft. lbs; Swing Base; Mounted on Tandem Axle Carrier; Auger Capacity up to 72” intermittent or 54” Constant; Carrier-1992 GMC/ Volvo Diesel Tandem Axle Truck – less than 200,000 mi. - Item ID-12056 - Tom 800.315.9950 x604 1992 John Deere 644E Wheel Loader - 7’ Bucket, 4x4, Enclosed Cab, Hour Meter Reads: 12,344, SN: DW644EB537757 is in Nevada - Item ID-12034 - Michelle 800.315.9950 x606 1992 Prentice 180D Log Loader with Cummins engine mounted on Pitts Trailer. Good condition with 7,700 hrs - Item ID-11434 - Daren 800.315.9950 x603 1993 FREIGHTLINER FLD12064ST, detroit 60 series engine, 425 hp, 18spd transmission, 4.10 gear ratio,

Visit us online at www.LBXonline.com!

13*$& 50 4&-- 26*$,

Shaving Mill Item ID: 11975 Contact: Michelle 800.315.9950 Ext. 606

www.LBXonline.com Barko 80 LOADER, Reman TRANS Dec. 07, Both rear end recently rebuilt, full synthetic fluids in trans & rear ends. Full double frame. Full Locking Rears. Well Maintained Truck Bed legnth 19â&#x20AC;&#x2122;6â&#x20AC;?, air ride suspension Front tires 60%, new set of drives - Item ID-11641 - Daren 800.315.9950 x603 1993 Timbco 425 - With dangle head; new under-carriage and runs great. Has all books. - Item ID-11582 Michelle 800.315.9950 x606 1993 Timberjack 380 C Skidder 23.1x26 rubber, Esco grapple, winch, enclosed cab, Cummins engine, rebuilt motor and transmission. Item ID-11534 - Daren 800.315.9950 x603 1994 Cat 518C Skidder - The engine

2004 Deere 648G III

1996 Timbco 445-C w/22â&#x20AC;?

Quadco Hot Saw

Item ID: 12030 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com was rebuilt 3 months ago. An extra Lufkin winch is included. Has 3400 size tires on it. - Item ID-11856 Michelle 800.315.9950 x606 1994 Haybuster HD-10 Tub Grinder - Powered by a John Deere Diesel Engine, Hydraulic Driven Tub and Conveyors, 10â&#x20AC;&#x2122; tub size, Hour Meter Reads: 920 Hrs, S/N: 18-149-0312 - Item ID-11693 - Michelle 800.315.9950 x606 1994 Hydro-Ax 611E Feller Buncher - Flotation tires at 75%, good overall condition. Works daily, 24â&#x20AC;? ax head, new injection pump, exceptionally clean operators station. - Item ID11302 - Daren 800.315.9950 x603 1994 John Deere 640E Cable Skidder

Well maintained.

Quadco saw head. Good condition. Runs good.

Great price!

Item ID: 12037 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com - Screened in Cab, 23.1 x 26 tires Ice chains rear and Bear Paws on the front. Exellent condition. Hrs are 11,000 - Item ID-11653 - Michelle 800.315.9950 x606 1994 Komatsu WA-180 - Diesel, forks (no bucket), A/C, new belts, ejection pump redone, hydraulic pump

1997 Bell Ultra C Feller Buncher Koehring 18â&#x20AC;? Hot Saw; 5073 hours; 28L tires with chains; Cummins 4 cylinder with 110HP; Joystick controls.

Good condition. Great for thinning and very stingy on fuel. Plus, this machine is easy to transport behind a oneton pickup. Smart way to cut when on a tight budget.

Item ID: 12050 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

$ ! " $ " "! ! # # ! # " # ! # ! ! " $ ! ! # ( ! " ! ! # ! ( "! ! # # # ! $ " $ ! ! "! ! $ " # ! "! # $ "! " ! $ " " ! "! # ! ! ! " !! "

&! $ ' ! $ # $ " # ! $ $ " # # ! !# !$ ! % # ! ! ! $ ! "! ! !

" ! !

For Classifieds Call Your LBX REP at 1-800-315-9950

The Original Lumbermanâ&#x20AC;&#x2122;s Exchange n 17

For Firewood Production - Take Your Pick

The DYNA

SC-14 SC-16 OR

Both Give you High Production in an Affordable and Profitable Processor The SC-14 (pictured) Offers

6 *1 )%.% ' )0!-.(!).

6 *1!,"/' 3 , /'% +!, .%*) 6 '!2% '! *1!, +.%*)- 5 - *, %!-!'

6 ,#!

2 7 7 2 *# -%4!

6 -3 .* +!, .! *).,*' 6 /'' 1%.$ )3 +% &/+ 6 !.- /+ -.

6 ,* / .%*) ",*( 5 "/'' *, +!, $*/,

Packed and ready to go!

*Production rate may vary based upon log size, quality, power source used and operator skill.

toll free: 1.888.820.3962 local: 231.734.4433 fax: 231.734.3681 6228 60th Avenue, Evart, MI 49631

12 Years of Building Quality Machines!

Call the Dealer Nearest You!

DYNA Portable Sawmills

18 n

January 2011

Shell Forest Products, Harrodsburg, KY

Marty Shell 859.325.3694

Great Lakes Firewood, Twin Lake, MI

Dennis Blankenship 231.206.4073

Sensenig Repair, Mio, MI

Dennis Sensenig 989.848.8346

Warrick Hallet Carpentry, Glencoe, MN

Warrick Hallet 320.864.4340

PDG Sales, Medina, NY SC-16 Demo Model Available

Philip Graber 585.798.2969

North Country Hydraulics, Potsdam, NY

Ben Deschaine 315.842.0388

Riehlâ&#x20AC;&#x2122;s Sawmill Sales, Lykens, PA

Amos Riehl 717.365.3852

Lickity Split Firewood Equip., Stetsonville, WI

Clayton Szydel 715.550.1077

Timberline Landscape, Davis, WV

Bill Mollard 304.940.0749

Visit us online at www.LBXonline.com!

2/7 %,%#42)#!, %15)0-%.4 ).# 9/52 3/52#% &/2 53%$ 2%#/.$)4)/.%$

s 3QUIRREL #AGE -OTORS s 'EAR -OTORS s 7OUND 2OTOR -OTORS s 3YNCHRONOUS -OTORS s $# -OTORS

FAX TO:

s $# -OTORS #RANE AND -ILL s !DJUSTABLE 3PEED $RIVES s 'ENERATORS !# AND $# s %NGINE 'ENERATOR 3ETS s 4RANSFORMERS 3INGLE 0HASE

*°"°Ă&#x160; Â&#x153;Ă?Ă&#x160;Ă&#x201C;nÂŁĂ&#x201C;Ă&#x160;UĂ&#x160;/Â&#x153;Â?i`Â&#x153;]Ă&#x160;"Â&#x2026;Â&#x2C6;Â&#x153;Ă&#x160;Ă&#x160;{Ă&#x17D;Ă&#x2C6;äĂ&#x2C6;

s 4RANSFORMERS 4HREE 0HASE s !CROSS ,INE -AGNETIC 3TARTERS s 2EDUCED 6OLTAGE 3TARTERS s 3AFETY 3WITCHES s 0HASE #ONVERTORS

WWW.ROWELECTRIC.COM

rowelec@glasscity.net 7% !.37%2 4(% 0(/.% (/523 s 7% "59 53%$ %,%#42)#!,

redone, differential rebuilt, center pin replaced, solid tires, runs good, good appearance. In Pennsylvania.

- Item ID-11394 - Daren 800.315.9950 x603 1994 Prentice 210D - Grapple built for scrap iron, straight machine, joystick controls, radio works. Nice machine. 9600 hrs. - Item ID-11301 Daren 800.315.9950 x603 1995 Franklin 4000 w/Roto Saw - Includes a 1995 Roto Saw, 4 BT Cummins, Heat and Stereo. Runs

and looks great. - Item ID-11662 Michelle 800.315.9950 x606 1995 Hydro-Ax 411E, 7236 hrs, 18â&#x20AC;?

Koehring Sawhead, 28L-26 Tires, 4WD, inclosed cab w/heat - Item ID11673 - Daren 800.315.9950 x603 1995 International 4700 Grapple Truck - 14â&#x20AC;&#x2122; Brush body, 4-1/2 ton boom, DT 466 engine, spring suspension, 239902 on the odometer. - Item ID-11883 - Michelle 800.315.9950 x606 1995 International 9300 Log Truck

- Tri-axle, with 235,000 original miles. Has 2007 Hood 7000 loader.

Drive tires are 98% stear tires are 50% and tag tires are 50%; Dayton hubs. 46,000 rears. - Item ID-11502 Michelle 800.315.9950 x606 1995 MORBARK 1250, Fixed Hammers, Knuckle Boom, Cab, and 36â&#x20AC;? Tarantula Heavy Duty Grapple, Tripple Axle, Magnetized Pulley Conveyor, Cat 3412DITTA, 750HP Engine. 1st Hour Meter Replace:6425. 2nd Hour Meter

Replaced: 634. - Item ID-11704 Daren 800.315.9950 x603 1995 Tigercat Model 720 FB w/5000 Bunching Head - 5638 Hrs; Cummins 190HP; Tires: 28LX26; 2@80%; 2@30%; Paint - Fair; Body - Good; Glass - Fair; Cutting Disc Good. Runs good. Excellent value. - Item ID12051 - Tom 800.315.9950 x604 1996 511EX Hydro-Ax With Bunching Saw Head - Hrs est at 6800. Only 200 hrs on factory reconditioned hydraulic motors and pumps.

USNR Edger Infeed

Mereen Johnson 424 Slat Bed Gang Ripsaw

Baker AX 12â&#x20AC;? Resaw

Fulghum 66â&#x20AC;? Chipper

Newman S382 Dbl Surface Planer

Jocar Linebar Resaw

Diehl Straight Line Ripsaw

250 HP WEG Softstarter

EXPERTLY BUILT AND SOLD ¡by a company you can depend on!

8Vaa :g^X 9dhh Zmi# (%,

,%+"(')"'+%) Â&#x2122; ;Vm ,%+"(')"%%),

lll#WZc_dcZh#Xdb Â&#x2122; ZbV^a/ hVaZh5WZc_dcZh#Xdb Â&#x2122; ;^cVcX^c\ 6kV^aVWaZ For Classifieds Call Your LBX REP at 1-800-315-9950

The Original Lumbermanâ&#x20AC;&#x2122;s Exchange n 19

!

! !

We know wood. [ Itâ&#x20AC;&#x2122;s what we do. ]

!""#$$%#"&!'((()**+,-./0#1*,((((

on ducti ce o r P an est High t Mainten !! s D! Lowe RANTEE GUA

Trailer:

Tandem axle, 8â&#x20AC;&#x2122;6â&#x20AC;? wide, 22â&#x20AC;&#x2122;-30â&#x20AC;&#x2122; long, 11â&#x20AC;&#x2122;8â&#x20AC;? high, 5-7 tons, Electric brakes.

Saw:

Superior Carbide Slasher - Cut wood instead of sharpen chains 36â&#x20AC;? to 60â&#x20AC;? diameter, 2 ga Carbide Slasher.

Engine:

50 to170 HP or PTO Drive with userâ&#x20AC;&#x2122;s tractor.

Hydraulics:

Commercial Shearing

Splitter:

35 - 72 tons, 3-5 second cycle time; 2, 4, 6, 8, 10, 12, 14 & 21 way pkg wedge.

Capacity - 4â&#x20AC;? to 27â&#x20AC;? Log diameter 0â&#x20AC;? to 48â&#x20AC;? Block Length Lifetime warranty on the entire splitter chamber.

Infeed Conveyor:

16â&#x20AC;? - 30â&#x20AC;? long Hydraulic powered.

Clean out Hopper: Get rid of bark and wood slivers before being conveyed away.

NEW GRAPPLE SYSTEM Now Available!

2040 ROGERS ROAD, PERTH, O N TA R I O K 7 H 1 P 9 CANADA

WWW CORD MASTER COM %MAIL CORDKING CORD MASTER COM

Today!

888-219-9663

2002 John Deere 230C LC Excavator w/ Thumb Currently working; Only 5200 Hrs; Cab w/ heat and A/C - Works, Glass good; minor dents all around but works good; New chains and sprockets about 300 hrs. ago.

Item ID: 12097 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com Comfort cab with working air.

28L tires with chains at 50%. Saw head has side pocket for cutting larger trees. Very well maintained machine. - Item ID-12072 - Tom 800.315.9950 x604 1996 BARKO 275B, 6BTA Cummins Engine, 52” Rotobec Grapple - Item ID-12076 - Daren 800.315.9950 x603 1996 Bobcat 773 skidsteer loader with bucket and flotation tires $10,000 - Item ID-11839 - Michelle 800.315.9950 x606 1996 Cat 515 Grapple Skidder John Deere winch, tires are 60%, 4 bearpaw chains, - Item ID-11305 Daren 800.315.9950 x603 1996 Caterpillar D5H - 140-hp 10’6” 6-way blade. New undercarriage, very clean. - Item ID-11306 - Daren 800.315.9950 x603 1996 Freightliner 120c, knuckleboom mounted behind cab, Cat 10 speed.

Great for picking up logs and loading. - Item ID-11435 - Daren 800.315.9950 x603 1996 GMC Topkick - Includes 3126 Cat Automatic transmission. Has an Ampiroll 90L Hook Lift installed that has 12,500 pound capacity. Truck runs well. - Item ID-11101 - Michelle 800.315.9950 x606 1996 Morbark 2400 Chipper Twin Disc Clutch,New Paint and Decals,Panels in Great shape,Pintle Hitch,New Knives,12X16.5 Tires Item ID-11879 - Daren 800.315.9950 x603 1996 Timbco 445B Leveling Feller Buncher - Quadco 22’ Hot Saw: Hour meter shows 6700 hrs, but owner says meter was changed. Est. hrs are 13,000. Runs good. Detailed maintenance history available.

Motivated Seller. - Item ID-12075 -

2001 Husky XL 235 on Mack Truck Lever Controls; runs good. Good back-up loader. Excellent price!

Item ID: 12066 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com Tom 800.315.9950 x604 1996 Timbco 445-B w/ 22” Quadco Hot Saw - 40 degree tilt, Selfleveling, 4000 hrs on old meter, on new meter 6530 hrs, Ser:# FT4C 811 012496, Reman pumps were installed with the new hour meter.

May 2003, Rebuilt Cummins 6CTA installed at 1000 hrs. June 2004, 2 idlers installed at 1800 hrs. Dec 2004, New Berco rails , pads and sprockets installed at 3400 hrs.

Apr. 2006, New updated swing bearing and house tilt pins .bushing installed at 3950 hrs. Dec. 2006, Pump drive and implement pump rebuilt at 4200 hrs. Apr. 2007, New Cat track motor installed at 4550 hrs. Sept. 2007, 3500 hr. used swing box from Fraley installed at 4800 hrs. Jan 2008, All new track rollers on right side installed at 4950 hrs.

Jan 2008, New saw head tilt flange installed at 5150 hrs. Sept 2008, Used boom from Fraley installed at 5230 hrs. Sept 2008, Stick cylinder resealed at 5280 hrs. Oct 2008, Main valve resealed at 5370 hrs. Oct 2008, Injector pump rebuilt at 5890 hrs.

Jan 2009, Boom cylinder resealed at 6020 hrs. Feb 2009 Shaft seals in pumps, tool cylinder resealed, and new AC pump installed at 6100 hrs.

Aug 2009, New saw teeth installed at 6430 hrs. Nov 2009 - Item ID-12037 Daren 800.315.9950 x603 1996 TIMBERJACK 460, CAB, AIR, DUAL ARCH/YO, OVERALL CONDITION OF MACHINE IS GOOD, 5408 hrs - Item ID-11539 - Daren 800.315.9950 x603 1996 TIMBERJACK 460 Grapple skidder - 10,850 hrs, 4wd, Cummins Engine, OROPS - Item ID-11695 Daren 800.315.9950 x603 1997 Bell Ultra C Feller Buncher - Koehring 18” Hot Saw; 5073 hrs; 28L tires with chains; Cummins 4 cylinder with 110HP; Joystick controls. Good condition - Item ID12050 - Tom 800.315.9950 x604 1997 Cat 515 Skidder - Cab has A/C. Has 28L26 tires. Engine rebuilt 9 months ago. - Item ID-11857 -

Morbark 58 Chipper Item ID: 12082 Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com Michelle 800.315.9950 x606 1997 CATERPILLAR D5H TSK II 6330 hrs, 6/Way Dozer, Canopy w/Sweeps, Winch, Esco Single Function Grapple :U/C 60% approx., Pads 22in SBG R/P/B 50% SEGS 50% BAL,50% Track Guards : Front/

Serco 8500 Log Loader Item ID: 12007 Contact: Michelle 800.315.9950 Ext. 606 www.LBXonline.com Rear/ Side Screens, Grapples w/ Ext, shipping dimensions weight 43,000lbs HEIGHT 10ft 5in LENGTH 17ft 10in WIDTH 8ft 9in - Item ID12012 - Daren 800.315.9950 x603 1997 Husky XL235 on Mack Truck

Contact Us for Your Equipment Needs. If we don't have it, we can find it!

304.872.2988 99 John Deere 648 GII Grapple Skidder - Cummings 6BT motor, single function grapple, decent tires, approx.

9,900 hrs. ...................................................... $35,000 98 John Deere 640 GII Cable Skidder - Cummings 6BT motor, new front tires and decent rear tires, approx. 9,500 hrs. ............................................................... $35,000 88 John Deere 640D Cable Skidder - Fair condition, 17,456 hrs. .................................................... $15,000 FMC Track Skidder - 653 Detriot motor, automatic Transmission ................................................... $10,500 FEC Flat Deck Bucksaw 3-line hookup ............... $3,000 CRT 42 Flat Deck Bucksaw 3-line hookup .......... $3,000 07 John Deere 450J - Closed cab with heat and air, 6-way hydraulic blade, Full forestry package, 60% on Track and undercarriage, showing 3,174 hrs . $42,500 96 John Deere 550G - 6-way hydraulic blade, lever steer, 50% on tracks, 70% on undercarriage, new paint, forestry package, showing 11,279 hrs. ......................... ..$25,000 89 John Deere 550G - 6-way hydraulic blade, limb risers and screened in cab, 80% on undercarriage, new tracks and paint, showing 6,442 hrs. ...................... .....$19,000

For Classifieds Call Your LBX REP at 1-800-315-9950

The Original Lumberman’s Exchange n 23

- Fair condition but runs good.

Good back up loader. Standard lever controls. Clean for its’ age.

Priced to sell. - Item ID-12066 - Tom 800.315.9950 x604 1997 Morbark 1200 Tub Grinder - Hour Meter Reads 1021, 3412 Cat Diesel, Morlift 350 Grapple, Excellent machine for your grinding needs. $65000 - Item ID-12035 Michelle 800.315.9950 x606 1997 TIMBERJACK 460 Log Skidder - EROPS with A/C & Heat, Serial #962609, 7303 hrs - Item ID-11537 Daren 800.315.9950 x603 1998 Bell Ultra THP - Totally rebuilt, 7-1-08. engine,trans,drive motors, reconditioned a/c. New primeX 23x26 tires,new 3/4 rud multi-ring chains. New firestone rear tire. 30” dangle saw. Working daily. 5300 total hrs. - Item ID-11679 - Daren 800.315.9950 x603

1998 Link-Belt 2800 - Runs and works good. 10,000 hrs. Fluids changed at 9,000 hrs. - Item ID-11650 - Michelle 800.315.9950 x606 1998 Prentice 210E - mounted on trailer, joystick controls has the extra hydraulics to run a slasher or delimber but this loader has never had a delimber on it. installed new floor mat, had the seat recovered, changed all fluids and filters, resealed the joystick controls, and worked on the trailer landing gear - Item ID-11833 - Michelle 800.315.9950 x606 1998 Prentice 210E - Loader has worked on small wood yard, level controls, John Deere engine, saw hook-up, good trailer - Item ID-11439 - Daren 800.315.9950 x603 1998 PRENTICE 310E, Machine is ready to work, overall condition “GOOD” - Item ID-12033 - Daren

800.315.9950 x603 1998 PRENTICE 620 WITH DENNHARCO DHT550 COMPUTERIZED MEASURINGTOPSAW-BUTT SAW-FORESTRY CAB and 8,540 hrs - Item ID-11888 - Daren 800.315.9950 x603 1998 Volvo truck w/160 Barco Log Loader - 1998 Volvo truck With a Volvo diesel engine, 5 speed transmission - Air brakes 160 Barco Log Loader 4 cylinder Detroit diesel engine Hydraulic system is good Runs great - Item ID-11436 - Daren 800.315.9950 x603 1999 BELL TF120B Feller Bunchers, one owner machine, it is on D5 cat tracks, Hrs not known; meter not working. - Item ID-11480 - Daren 800.315.9950 x603 1999 Cat D5C LGP w/ Mann rake new under carriage (20 hrs), 4000 original hrs, new Hystat system

PIPER’S Saw Shop 5 7 0 6 • 5 4 8 • 800 Promotional Pricing Offer Simonds Red Streak Hard Back 1-1/4” x .042 x 3/4” or 7/8” Length 13’2”

$14.27 each

2005 CordKing Firewood Processor Item ID: 12027 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com

CAT D4H TSK w/ Winch & Forestry Pkg. Item ID: 12024 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com

L im it e d T im e O n ly

Tell us you saw it here!

2004 Tigercat 630C Grapple Skidder 12,295 hours but well maintained. Center section tight. Cummins C8.3 - 240 horse power; Dual Arch Tigercat Bunching Grapple; Steering tight; Some slack in front cradle; 34” Tires at 40% VIN #: 6302024 NC Item ID: 12093 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com 24 n

January 2011

Visit us online at www.LBXonline.com!

Sawmill with Chipper Item ID: 11992 Contact: Michelle 800.315.9950 Ext. 606

www.LBXonline.com rebuilt by Cat when under warranty at 3500 hrs, includes Mann rake, 6-way blade, OROPS, new paint and decals, very nice located in Michigan - Item ID-11822 - Michelle 800.315.9950 x606 1999 TIMBERJACK 460 Grapple Skidder - Single Funct Grapple, 30.5 Tires, hrs 9999, Serial # : 995940 Item ID-11696 - Daren 800.315.9950 x603 2000 Daewoo with Denharco DM3500 stroke delimber - This is a bank repo an is open to offers - Item ID-12026 - Daren 800.315.9950 x603 2000 TIMBERJACK 460 Skidder 2000 TIMBERJACK 460, 30.5 ISD Tires, 6BTA Cummins, 120 Esco Grapple, 8900 hrs - Item ID-11538 Daren 800.315.9950 x603 2001 CAT D5H TSK II - 8,102 hrs, Cab with A/C, Six Way Blade, Fixed Esco 120” Grapple w/Winch, U/C 85%, rebuilt transmission - Item ID-12083 Daren 800.315.9950 x603 2001 ROTOCHOPPER MC166 - 3600 hrs, Cat 3406 460 hp, includes coloring attachment - Item ID-11692 - Daren 800.315.9950 x603 2002 773G Bobcat - Has 3900 hrs and a Kubota diesel. - Item ID-11497 Michelle 800.315.9950 x606 2002 Case 90XT Skidloader - has 1950 hrs, 7’ bucket. - Item ID-11675 Michelle 800.315.9950 x606 2002 John Deere 230C LC Excavator with thumb - Currently working; Only 5200 HRS; CAB W/ HEAT AND AC - WORKS GLASS GOOD; MINOR DENTS ALL AROUND BUT WORKS GOOD; NEW CHAINS AND SPROCKETS ABOUT 300 HRS AGO - Item ID-12097 - Tom 800.315.9950 x604 2003 Cat 247 Track Skidloader - New rear bogie wheels, hydraulic quick attach, vertical lift self leveling bucket. Machine has only 1100 hrs.

Was well maintained and is ready to work. - Item ID-11348 - Daren 800.315.9950 x603 2003 Cat 525B Grapple Skidder - S/N 3KZ00897, 10,496 Hrs, EROPS, ESCO Grapple w/ winch, 30.5 X 32 Tires 60%. Machine is in Tennessee - Item ID-11986 - Daren 800.315.9950 x603 2003 Morgan 2 Saw Trimsaw - This machine was bought new and never

Timberwolf Pro-HD XL

Inline Firewood Processor Item ID: 12013 Contact: Michelle 800.315.9950 Ext. 606 www.LBXonline.com was really used, less than 50 hrs if that, machine has never been painted it wwas just not used. - Item ID-11904 - Daren 800.315.9950 x603 2004 Barko 495MH Mounted on Trailer - 3280 hrs, Hydraulics for a self propelled carrier; Bar Slasher Hydraulics; Cummins engine; Rotobec 5052 grapple. Very good condition. Poor paint. Dry and tight.

- Item ID-12065 - Tom 800.315.9950 x604 2004 BARKO 495ML, 7068 hrs, heat and air works great, 6cyl Cat s/n#3539, Strong loader and is ready to work - Item ID-11905 - Daren 800.315.9950 x603 2004 Bobcat S185 w/ high flow - 2004 Bobcat S185 skidsteer, turbo diesel, 56 HP, 1700 hrs, wellmaintained skidsteer, everything is working. - Item ID-11840 - Michelle 800.315.9950 x606 2004 Cat 287B - 2004. on tracks.

1390 hrs. Cab with A/C and hand controls. Tooth bucket. This is a one owner machine. - Item ID-11652 Michelle 800.315.9950 x606 2004 Cat 950GII Front End Loader - 950G currently has 18,111 hrs on meter and is equipped with Hydraulic Coupler, Automatic Greasing System, Fire Suppression, and 20.5 x 25 Tires. S/N 950GCAXR00269. Equipped with GP bucket and having new 23” tires before sale. - Item ID-12100 - Tom 800.315.9950 x604 2004 DEERE 648G III - 1420 hrs, 50% on tires, Pins are tight - Item ID12030 - Daren 800.315.9950 x603 2004 JD 648GIII Single Arch Grapple Skidder - Well maintained; 8200 hrs - engine rebuilt at 7100 hrs; Price reduced to allow for new tires for buyer; Pulls strong. Motivated Seller - Item ID-12067 - Tom 800.315.9950 x604 2004 KOMATSU PC 200 LC7 Excavator w/Thumb - 2004; Only 3945 HRS; CAB W/ HEAT AND AC WORKS; UC 60 %; SOLESBY THUMB; Very Clean and well maintained.

Komatsu has highest resale value of all excavators. - Item ID-12096 - Tom 800.315.9950 x604

‘01 Husky XL 235 on Mack Truck Lever Controls; runs good. Good back-up loader. Excellent price!

Item ID: 12066 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com 2004 Tigercat 630C Grapple Skidder - 12,295 hrs but well maintained.

Center section tight. Cummins C8.3 240 horse power; Dual Arch Tigercat Bunching Grapple; Steering tight; Some slack in front cradle; 34” Tires at 40% VIN #: 6302024 NC - Item ID12093 - Tom 800.315.9950 x604 2004 Valmet 425 Ex-10 Harvester - 4700 hrs: Timbco self leveling carrier with Cat D6 side frames; Long reach harvesting boom of 35’; Valmet 360 harvesting head is fast and efficient; Well maintained with service history. - Item ID-12074 -

‘98 John Deere 640 GII Grapple Skidder 6 BT Cummings, new front tires, decent rear tires, approx. 9,500 hrs. .................... $35,000

(304) 872-2988 6h` [dg I]dbVh dg AZdc

Tom 800.315.9950 x604 2005 Bobcat S175 w/ grapple bucket - 945 hrs, always stored indoors, keyless entry, backlit status screen, new microfiber seat, high flow, includes grapple bucket, good tires, dealer maintained. - Item ID-11842 Michelle 800.315.9950 x606 2005 CAT 525B Grapple Skidder 8100 hrs, EROPS w/ AC Single Arch w/ Grapple & Winch tires are 25% - Item ID-12028 - Daren 800.315.9950 x603 2005 DEERE 748G III with Grapple

REAL TUFF BALER&BAGGERTM Save $$$ on Bedding—Bale it Yourself!

Electric or Diesel, Manual or Automatic

$13,907

BUILT TO LAST Real Tuff Baler Dimensions & Specifications

:Vhn id jhZ 7j^ai d[ ]^\] fjVa^in bViZg^Vah VcY ldg`bVch]^e =ZVkn Yjin id ZcVWaZ V WgdVY heZXigjb d[ WVa^c\ dei^dch :Vh^an adVYh Wn XdckZndg dg bVcjVa bZi]dY

- (2) Hydraulic Cylinders are controlled by using a two spool valve - 30 H.P. motor (220/440 volt 3 phase) starter not included - 25 G.P.M. Pump - 50 Gallon reservoir capacity - Only the highest quality industrial components are used

6)%0 89** -2(9786-)7

Phone: (325) 641-8300 Fax: (325) 643-3243

For Classifieds Call Your LBX REP at 1-800-315-9950

Manufactured by M & F Gauge & Specialty Co., Inc. PO Box 693 • Brownwood, Texas 76804 www.realtuffbaler.com

The Original Lumberman’s Exchange n 25

and Winch - 5,654 hrs, NEW Center Section, 30.5x32 Tires, Tires ar 75% all around, This is a super nice Skidder and is working daily - Item ID-11976 - Daren 800.315.9950 x603 2005 John Deere 550J - This has only 1981 hrs, has a cab with A/C, 24” pads, rear cab screens and front limb risers. The pins and bushings have been turned and the sprockets have been replaced. - Item ID-11661 Michelle 800.315.9950 x606 2005 Prentice 280 TMS Loader Like new with less than 1000 hrs.

Full package with loader, delimber,

slasher, and trailer! Less than half the price of new unit! Great value.

- Item ID-12104 - Tom 800.315.9950 x604 2005 Prentice Model 410E w/TMS Package - 2730 Hrs; 52” Grapple; CTR Model 450 Pull Through Delimber; Prentice TMS System with III Series Trailer; Very good condition. Well Maintained. KY Item ID-12079 - Tom 800.315.9950 x604 2005 Rayco RC12 Chipper - John Deere engine with 500 hrs, ulsating down pressure, like new condition.

MDI PROBE 2100

Machine is capble of chipping 12” wood. This machine is all but brand new. Has been kept in garage. - Item ID-11351 - Daren 800.315.9950 x603 2005 Valmet 890.2 20 ton Forwarder - 10,450 hrs. Rear Bogeys recently sealed. 8 wheeled. Good condition and well maintained. Eco Tracks.

Best price available for a 20 ton Forwarder in this condition. Ready to go to work TODAY! Motivated Seller! - Item ID-12068 - Tom 800.315.9950 x604 2006 Bandit 2680 Horizontal Grinder - Only 765 hrs; Cummins 400HP engine; 4’ wide fixed discharge belt, Wireless remote, Water dust supression system, 315/80R22.5

PORTABLE INDUSTRIAL METAL DETECTOR SIMPLE TO OPERATE –

tires. This machine is very clean in excellent condition. - Item ID-12048 Tom 800.315.9950 x604 2006 Barko 495 Crawler Loader 48” Hydraulic Cab Riser; 32’ reach; Totally gone through with new pins bushings and engine service. 9463 hrs. Undercarriage is 90% with 28” pads. Has delimber and bar saw slasher hydraulics. - Item ID-12102 Tom 800.315.9950 x604 2006 Barko 495 Crawler Loader 5008 hrs; Unit has 48” hydraulic cab riser that totally folds forward for legal height transport; Undercarriage is 90% with wide 36” pads. Equipped with both delimber and bar saw hydraulic package. 32’ reach and Rotobec 48” grapple. Excellent condition for yard machine or working at set.

Priced to sell. - Item ID-12103 - Tom 800.315.9950 x604

just turn on and go!

MDI’S SUPERIOR DIGITAL TECHNOLOGY will detect an 8d nail buried 15" into a log!

• Pre-set for maximum sensitivity with adjustable sensitivity control • Microprocessor controlled; eliminates mineral interference from logs or round for maximum detection depths • Bright L.E.D. display indicates signal strength and battery level • Touchpad control allows precision pinpointing of tramp metal P.O. BOX 26440 • EUGENE, OREGON 97402 PHONE: 541-345-7454 • FAX: 541-345-7971 www.metaldetectorsinc.com

“Providing a full range of industrial metal detectors since 1965.”

26 n

January 2011

2004 Valmet 425 EX-10 Harvester 4700 hours; Valmet 360 Proc. Head. Fast and efficient measuring. In woods or at the deck.

Leveling machine for working steep grades.

35’ reach makes this a great thinning machine.

Maximize your earning from every stem!

Item ID: 12074 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

2004 JD 648GIII Single Arch Grapple Skidder Well maintained; 8200 hours, engine rebuilt at 7100 hours; Price reduced to allow for new tires for buyer; Pulls strong. Motivated Seller!

(Tennessee) Item ID: 12067 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

Visit us online at www.LBXonline.com!

2006 Cat 420E Loader Backhoe - Comfort cab with AC/Stereo; Extend-a-hoe; 400 hrs; Aux hydraulics; 4 WHEEL DRIVE; 24” back hoe bucket - Item ID-12071 Tom 800.315.9950 x604 2006 Cat D6R Dozer with Semi-U Blade - 2821 Hrs; 24“ pads. 12’4“ Blade, Power tilt blade, Runs and operates good. Under carriage good, sprockets, rails, and pads good; Cab & Air; Cat C-9 Diesel Engine. - Item ID-12058 - Tom 800.315.9950 x604 2006 Caterpillar 287B Track Skidloader - Hydraulic quick attach, vertical lift, self leveling 83” bucket, auxillary hydraulic. 600 hrs. - Item ID-11352 - Daren 800.315.9950 x603 2006 Eco-Log 580B - 2700 hrs.

Powered by a 250-hp Cat diesel engine. Logmax 7000b Harvesting head. Very motivated seller. - Item ID-11250 - Michelle 800.315.9950 x606 2006 JD 700J Dozer with Winch Very clean dozer with winch and low hrs of 1869. Enclosed cab with comfort package. Runs strong and is priced to sell. Excellent value and worth a look. NC - Item ID-12101 Tom 800.315.9950 x604 2006 JD 700J XLT Dozer - 1075 Hrs. Excellent condition. Very well maintained. Comfort cab with air and stereo. Work light package.

Undercarriage at 90%. - Item ID12073 - Tom 800.315.9950 x604 2006 NEW Fuchs 460 Log Loader -

44’ Reach. 212 Demo Hrs. Rotobec 5012 Grapple. Hydraulic raising cab for excellent operator visibility.

Priced well below dealer cost.

Motivated Seller. Great storage yard machine. - Item ID-12064 - Tom 800.315.9950 x604 2006 PRENTICE 384 mounted on a Mack Truck - 2006 PRENTICE 384 mounted on a Mack Truck, 4600 hrs, has been on a yard since 2006 - Item ID-12008 - Daren 800.315.9950 x603 2007 Barko 930 Mulcher - 300HP Cummings Engine, Hydraulic Winch with an FAE 300U Mulcher; Approx.

3500 hrs (must be confirmed); Tires 80%; Clean and dry and ready to work. Good condition. - Item ID12052 - Tom 800.315.9950 x604 2007 John Deere 700J LT Dozer - 1155 Hrs; John Deere 6068 6cyl Diesel; 6 way blade, 10’ 6“ blade, EROPS, Corner bits and cutting edge good; Very clean and very good condition; No winch. VIN #: T0700JX148380; Excellent value. Item ID-12094 - Tom 800.315.9950 x604 NEW 2008 ASV Posi Track RC100 skidsteer loader, has low and high flow, only 600 hrs! Posi Track R-series see one in action! mfg info The RC-100 is powered by the Perkins 1104C-44T turbocharged diesel engine. It is a 4.4 liter 4-cylinder diesel engine that offers high output with low emissions and low sound. In fact, with 304

‘99 John Deere 648 GII Grapple Skidder

FMC Track Skidder

6 BT Cummings, single function grapple, decent tires, approx. 9,900 hrs. .....................$35,000

653 Detroit motor, automatic Transmission .................... $10,500

(304) 872-2988

(304) 872-2988

6h` [dg I]dbVh dg AZdc

6h` [dg I]dbVh dg AZdc

ft-lb of torque, ASV’s RC-100 has more available torque than any other rubber tracked loader. The Posi-Power Control™ (PPC™) system is an integral part of the RC-100’s powertrain. PPC™ is a power management system that lets you work the RC-100 to its fullest potential as it automatically shifts the hydrostat to match available engine horsepower. With the PPC system, it is virtually impossible to stall the engine. Advanced Hydraulic System The RC-100 features the

most advanced hydraulic system available in its class. The tracks are directly driven by two-speed drive motors with travel speeds up to 11.5 mph. The hydraulic system provides up to 38 gpm to the standard high flow auxiliary circuit on demand or 20 gpm to the low flow circuit. The RC-100’s advanced load-sensing hydraulic system is highly efficient, producing 10 percent more hydraulic horsepower — horsepower that is simply

Our New Shaving Mills <^kZ Ndj

Vi Vc

Big Production Affordable Price!

Our New Shaving Mills Give You Big Production at an Affordable Price!

UÊ9 ÕÀÊV ViÊ vÊx¿Ê ÀÊn¿Ê `i Ã

Ndjg X]d^XZ d[ * dg - bdYZah UÊ* ÜiÀi`ÊLÞÊ Þ`À>Õ VÊÀ> ÌÞ«iÊÃÞÃÌi EdlZgZY Wn ]nYgVja^X gVb"ineZ hnhiZb UÊ i>ÌÕÀiÃÊÌÜ Ê ÀÊÌ ÀiiÊ{Ó¸Ê }Ê`Þ > V> ÞÊ L> > Vi`Ê i>`ÃÊÜÉnÊ ÛiÃÊ«iÀÊ i>`

;ZVijgZh ild dg i]gZZ )' adc\ dynamically balanced ]ZVYh UÊ i>`ÃÊ>ÀiÊ ÊV ÃÌ> ÌÊ«À `ÕVÌ ]ÊÀi}>À` iÃÃÊ v l^i] -"`c^kZh eZg ]ZVY Ê L ÝÊÌÀ>Ûi Ê` ÀiVÌ

=ZVYh VgZ ^c XdchiVci egdYjXi^dc! gZ\VgYaZhh d[ Wdm igVkZa UÊ >V Ên¸Ê` > iÌiÀÊ i>`Ê ÃÊ« ÜiÀi`ÊLÞÊ>ÊxäÊ «ÊÊ Y^gZXi^dc i iVÌÀ VÊ Ì À :VX] - Y^VbZiZg ]ZVY ^h edlZgZY Wn V *% ]e ZaZXig^X bdidg UÊ Ê«À `ÕVÌ ÊpÊ1«ÊÌ ÊxäÊVÕL VÊÞ>À`ÃÊ«iÀÊ ÕÀt

=^\] egdYjXi^dc ¶ Je id *% XjW^X nVgYh eZg ]djg

Expertly builtBUILT and sold

by SOLD a EXPERTLY AND

·by a company youdepend can depend company you can on.on!

> Ê À VÊ ÃÃÊ­iÝÌ°ÊÎäÇ®

8Vaa :g^X 9dhh Zmi# (%,

800-241-8983 ,%+"(')"'+%) ;Vm ,%+"(')"%%),

>cYjhign»h Bdhi IgjhiZY HdjgXZ

ÇäÈ ÎÓ{ ÓÈä{ÊÊUÊÊFAX 706-324-0047

lll#WZc_dcZh#Xdb ZbV^a/ hVaZh5WZc_dcZh#Xdb ;^cVcX^c\ 6kV^aVWaZ ÜÜÜ°Li iðV ÊÊUÊÊi > \ÊÃ> iÃJLi iðV ÊÊUÊÊFinancing Available For Classifieds Call Your LBX REP at 1-800-315-9950

The Original Lumberman’s Exchange n 27

2004 Barko 575 Stationary Diesel 12,000 hours; Good for sorting deck or Barge mount. Was working everyday when replaced with new. Very good price. High Lift Capacity!

Item ID: Call for info!

Contact: Tom 800.315.9950 Ext. 604

2004 Komatsu PC 200 LC7 Komatsu has highest resale for their excavators. Only 3945 hrs; Cab w/heat and air both working well; UC 60%; Solesby Thumb; Very Clean and well maintained. Excellent value.

www.LBXonline.com

Item ID: 12096 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

lost on less efficient systems. As a result, you get more done and you get it done faster. Advanced Rubber Track Undercarriage The RC-100 is the only machine in its class designed from the ground

up to run on a suspended rubber track undercarriage. That means there are no compromises when it comes to machine width, ground clearance and machine balance.

It also means you get maximum

28 n

January 2011

traction and a smoother ride.

Forty-two wheeled contact points spread the machine weight over 18-inch-wide rubber tracks, exerting only 3.5 psi ground pressure. With the RC-100 you can crawl over the most fragile ground with minimal surface disturbance. You can also work productively in virtually any ground condition. As with all ASV equipment, there is no steel inside the rubber tracks so operation is smooth, quiet and with much less friction. Torsion axle suspension of the undercarriage helps maximize contact with the ground for better traction and a much smoother ride than rigid-mounted track systems. It is better for the operator, better for load-retention and easier on the machine. Easy, Comfortable Operation The RC100’s operator station has more features and built-in comfort than ever before. New joystick controls feature integrated hydraulic and electric attachment controls for precise, low-effort operation. A new hydraulically-operated quick attach is standard so you can connect to many non-powered tools without leaving the operator seat. Tilt-up Service Access A new tilt-up ROPS/ FOPS canopy makes access to the hydraulic system quick and easy. Service to the engine and cooling package is through a tilt-up rear hood. - Item ID-11859 - Daren

800.315.9950 x603 2008 Bobcat S175 - 2008 Bobcat S175 only 17 hrs!, 46 HP, 68” low-profile bucket, 8 bolt-on teeth Weight: 6,001 - 6,500 lbs $24,000 OBO - Item ID11841 - Michelle 800.315.9950 x606 2008 JD 2554 Harvester with Waratah 624 Processing Head - 4700 hrs; Waratah 624 Harvesting Head.

Great for both in woods harvesting or deck processing. Get more value from every stem! Motivated Seller! Well maintained. Below market price. - Item ID-12087 - Tom 800.315.9950 x604 2008 Valmet 603 Three Wheeled Feller Buncher - 3700 hrs; 18” Bunching Saw Head; 28” tires at 70%; Rear tire 20%; Cummins 4-cyl, 130 HP uses 4.5 gal/hr.; Very good condition. Excellent thinning machine - Item ID-12053 - Tom 800.315.9950 x604 2008 Vermeer BP8000 Bale Processor - BP 8000 bale processor.

Machine has big tires and remote for cab. It is not a final cut machine.

Excellent condition. MS - Item ID12099 - Tom 800.315.9950 x604 225A Timberjack Skidder - In ready to work condition. 1986. with a 353 Detroit engine. - Item ID-11991 Michelle 800.315.9950 x606 230 Timberjack Forwarder - Late 70’s model forwarder. Is powered by a Detroit 353, has a Husky Brute loader, tire size is 24-5-32.

Engine completely rebuilt 3000

Visit us online at www.LBXonline.com!

2006 JD 700J XLT Dozer 1075 Hours. Excellent condition. Very well maintained. Comfort cab with air and stereo.

Work light package.

Undercarriage at 90%.

One owner who would rather sell than get hammered by trading!

Item ID: 12073 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com hrs ago. - Item ID-11993 - Michelle 800.315.9950 x606 510 International Wheel Loader Please call for information. Photos coming soon. - Item ID-11990 Michelle 800.315.9950 x606 518 Cat Grapple Skidder - Late 80’s 4WD Drive; Cat winch, maintained machine.; 30.5 x 32 Tires, 95% rubber. 130-hp, all pins are good.

- Item ID-11078 - Tom 800.315.9950 x604 98’ 620 Prentice Track Cutter Quadco saw / 80% under carriage / rebuilt finals / John Deere engine 6,000 hrs. on it. - Item ID-10479 - Tom 800.315.9950 x604 Barko 160A with Chop Saw 1992. Chop Saw 2000 or 2001 included. - Item ID-11117 - Michelle 800.315.9950 x606 Barko Fellerbuncher 785 - 1999. with a 22” Koehring head. - Item ID-11334 - Daren 800.315.9950 x603 Bell Super T - 1992. serial number BCH3953, 23.1x26 tires. Needs a head - Item ID-11898 - Michelle 800.315.9950 x606 Bell Ultra C - 1997. with Cummins 3.9 110-hp 4 cylinder diesel engine.

A/C in cab. 18” Koehring saw felling head, joystick controls. 600 hrs on Reman Cummins engine; 5073 total hrs on machine. Very good condition. - Item ID-10803 - Michelle 800.315.9950 x606 Bell Ultra T - 1997. with 1989 hrs.

23.1 tires are at 90%, joystick controls, extra 24” bars, new seat, no dents or broken glass. Dangle head. Currently working. A/C in cab. S/N BCH4648 - Item ID-10727 Michelle 800.315.9950 x606 Bobcat 843B Loader - Grapple loader, photos and more info coming soon. - Item ID-10777 Michelle 800.315.9950 x606

2005 Prentice Model 410E 2730 Hours; 52” Grapple; CTR Model 450 Pull Through Delimber; Prentice TMS System with III Series Trailer; Very good condition.

Well Maintained Item ID: 12079 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com Case 580 Fork Lift - Mid 70’s Fork Lift 580 Case, High Lift, Good Condition - Item ID-11493 - Daren 800.315.9950 x603 Cat 242B Skidsteer - 2006. 300 hrs on machine. Cat engine. Includes bucket, forks, spare tire and chains. - Item ID-10845 - Michelle 800.315.9950 x606 Cat 518 Grapple Skidder - 1980. with grapple, winch and canopy. Hrs unknown; no meter. - Item ID-11103 Michelle 800.315.9950 x606 Cat 518C Grapple Skidder - 1995.

With grapple & winch. 12000 hrs - 200 hrs since engine and transmission were rebuilt. Really good condition. Tires are 28 X 46.

Open cab. - Item ID-11293 - Michelle 800.315.9950 x606 Cat 545 Grapple Skidder - 2003.

Please call for information. - Item ID10996 - Michelle 800.315.9950 x606 Cat 545 Grapple Skidder - 2004. Call for more information. - Item ID10997 - Michelle 800.315.9950 x606 Cat 8000# Forklift - 1985 year, V80E type d. Axle repaired and transmission fixed. - Item ID-10674 Michelle 800.315.9950 x606 CAT D4H TSK WITH WINCH AND FORESTRY PKG - 1987. Only 7500 original hrs. - Item ID-12024 - Daren 800.315.9950 x603 Cat D5M XL Dozer - With EROPS, Sweeps and screens. 50,000 pound W5C winch. 3490 hrs. New factory log arch. Very clean and straight machine. - Item ID-11253 - Michelle 800.315.9950 x606 Caterpillar D6R with winch, hrs 8211, s/n 5LN00696 - Item ID-11906 Daren 800.315.9950 x603 DEERE 440 - sn#090370, with a winch - Item ID-11431 - Daren 800.315.9950 x603 Ford Tractor with Trailer - 1989 Ford Tractor truck with 48’ Great Dane Trailer - Item ID-10671 - Michelle 800.315.9950 x606 Franklin 105 and shred king forestry

machine - Both units powered by detroit engines, excellent condition, will separte the units, also have 16” Morbark sheer head for the franklin. serial#fe0159 Model #8000FE - Item ID-10415 - Michelle 800.315.9950 x606 Gehl 3935 Skidloader - 2005. with less than 2000 hrs. - Item ID-10643 Michelle 800.315.9950 x606 Gehl 7800 Skidloader - 2004. with enclosed cab. Has radio and heat. - Item ID-11649 - Michelle 800.315.9950 x606 Gyro Trac GT25 - Machine has 1278 hrs. - Item ID-11801 - Michelle 800.315.9950 x606 Haybuster IG-8 Tub Grinder -

For Classifieds Call Your LBX REP at 1-800-315-9950

Powered by a 110-hp John Deere diesel engine. Has only 1034 hrs.

Includes a 1” and 1-1/2” screen. 8’ discharge conveyor. - Item ID-11426 Michelle 800.315.9950 x606 Hokah mill tie trim and stack station - The electric eye which stops the ties on this 8’ - 12’ trimmer is adjustable so that the sawyer can determine to trim more off one end or the other. Conveyors to take away cut off blocks are part of the system as is the stacker. This item has it’s own integral hydraulic unit in the base. - Item ID-11724 Michelle 800.315.9950 x606 Hood 28000 Loader - 2004; 72” hot saw; only 340 hrs. - Item ID-11418 -

Comin gS 4 New oon Mode ls

Beaver Model 18

The Original Lumberman’s Exchange n 29

Michelle 800.315.9950 x606 Hyundai with 2 Head Roller - 1994 Hyundai with 820 roller stroke Lakewood head. - Item ID-10977 Michelle 800.315.9950 x606 JCB 540 Wheel Loader - 2000. 4X4, 2-1/2 yard quick attach bucket, Extenda hoe, cab with heat and A/C, 5628 hrs, one owner and well maintained. - Item ID-10774 Michelle 800.315.9950 x606 John Deere 240 - Skid Loader 52HP 1785 Hrs. Excellent Condition.

12x16.5 Tires 75% More Details Soon. THANKS FOR LOOKING. - Item ID-11799 - Daren 800.315.9950 x603 John Deere 290 - With Elite processing head, 2 roller. 4 cylinder

John Deere engine. Very good undercarriage. - Item ID-10934 Michelle 800.315.9950 x606 John Deere 410D - Backhoe, front end loader, new tires, starts easy and runs great. - Item ID-10726 Michelle 800.315.9950 x606 John Deere 548 D Grapple Skidder - 23/1x26 rubber at 90%. Enclosed cab, no winch. - Item ID-11558 Daren 800.315.9950 x603 John Deere 640E Cable Skidder - 1995. 500 hrs on new motor.

Has new winch, new center, new batteries and heavy duty rears. This machine runs great and is ready to go to work. - Item ID-11330 - Daren 800.315.9950 x603

John Deere 640E Skidder - 1993. 6 cylinder, powershift transmission, no leaks - Item ID-11989 - Michelle 800.315.9950 x606 John Deere 643D - 1995. 22” kohring sawhead. tires are 70%, Motor is new replaced last month, 8000 hrs on machine. heated and A/C cab. Item ID-11414 - Daren 800.315.9950 x603 John Deere 648D Skidder - Has new hydraulic pumps, has winch, runs great, 8332 hrs. - Item ID-11711 Michelle 800.315.9950 x606 John Deere 650H - 2000. in great condition. 10’6” blade with 24” new pads. Hydrostatic transmission.

4795 hrs. 90-hp. - Item ID-10560 -

CARDINAL WIRELESS 5775 Park Plaza Ct. Indianapolis, IN 46220 317 577 9944 www.cardinal-wireless.com

FREE shipping for minimum 3 units

GPS TRACKING

TWO-WAY RADIOS

for Truck Fleets

Up to fifteen miles of loud, clear range and NO airtime charges.

GATEGUARD

ASSET TRACKING

®

Remote Gate Control and Radio Communication

for Construction Equipment, Generators, Trailers and Rental Equipment

HEADSETS

for Hearing Protection

Call today for more information:

800-332-3268

www.cardinal-wireless.com 30 n

January 2011

Michelle 800.315.9950 x606 John Deere 843H - 2001. 28/26 tires at about 60%. Waratah head, all pins are tight and sheet metal is straight.

- Item ID-11337 - Daren 800.315.9950 x603 Koehring Hot Saw - 22” head. Very good condition. The bottom pin is 2” around and 12” long. The top pin is 2-1/2” around and 4-3/8” long. - Item ID-11469 - Michelle 800.315.9950 x606 Manitou MLT523 - MLT523 Turbo, 2005, Perkins diesel, new front foam filled tires, rear tires are good. 17’ height reach and 8’ straight out, 4 or 2 wheel steer, enclosed cab with air and heat, 1750 hrs, has extra grapple bucket. - Item ID-11605 Michelle 800.315.9950 x606 Massey Ferguson 6170 Tractor - This tractor is a. 1998; it has air in the cab, shuttle shift, 85 to90% rubber on the tires and only 2468 hrs. It is 120-hp. Is 4-wheel drive. - Item ID10546 - Michelle 800.315.9950 x606 Metavic Log Loader trailer - Log loader trailer is 2 years old, has 12’ boom with a 30” grapple. 12’ bunk, will hold 20” logs/polewood, has 6500lb winch, 110’ 5/16” cable. Item ID-11362 - Daren 800.315.9950 x603 Mitsubishi Log Loader - High cab, 66,000 weight, low use with good undercarriage. Has a new starter.

Has grapple - Item ID-10780 Michelle 800.315.9950 x606 Morbark Tree Shear - 20” Morbark SB52 Superbuncher tree

‘08 Valmet 603 3-Wheeled Feller Buncher 3800 hours; 18” bunching saw head; Cummins 4-cyl engine with 130HP; Enclosed cab with heat/air/stereo; 28” tires at 70%; Very good condition. Low maintenance. Great thinning machine with zero turn radius.

Economical to operate at 4.5 gal/hr. Very good value for hard to find machine.

Item ID: 12053 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

Visit us online at www.LBXonline.com!

shear. - Item ID-11468 - Michelle 800.315.9950 x606 NEW Pitts LB52-24D Tri-Axle Detach Trailer - 2008 Model. No miles. Black paint. Has Pony motor, Fold out outriggers, 5 position neck, D rings, and covered wheel wells. Priced to sell! NC - Item ID-12089 - Tom 800.315.9950 x604 NEW Pitts LT42-8UL 8” Center Drop Log Trailer - Width: 8’6”; Color: Black; Additional Info: 4-Bolsters - Log Trailer Length: 42’ Model #: LT40-8UL - Log Trailer Weight: 8,900 FOB: NC - Item ID-12090 - Tom 800.315.9950 x604 Prentice 180 Loader - Please call for information - Item ID-10917 Michelle 800.315.9950 x606 Prentice 210D - 1991. 30’ boom and S&M Trailer. 6 cylinder BT Cummins (about 140-hp) - Item ID-10602 Michelle 800.315.9950 x606 Prentice 310E Knuckleboom Loader - 1999. with CTR delimber, air & heat, Cummins power and 7900 hrs - Item ID-10916 - Michelle 800.315.9950 x606 Prentice 720 Processor - With 33” Timbco Sawhead, 8.3 Cummins diesel engine, 5400 hrs. Also track chains & sprockets are about 40%. - Item ID-11318 - Michelle 800.315.9950 x606 Serco 8500 Log Loader - Model 8500, Not mounted - Item ID-12007 Michelle 800.315.9950 x606 Skylead Yarder - $40,000 in new parts. Brand new motor 300 hrs ago; new turbo, injector pump, new lines, new radios, new batteries, new haulback brake, new drive chain, strawline brake, etc. In good condition. 1999. - Item ID-11527 Michelle 800.315.9950 x606 Tigercat 860 Stroke Delimber - 1999. bought new in 2001. Excellent condition and ready to work.

Delimber is a Denharco DM3500.

Machine is a one owner, one operator machine. - Item ID-11886 Michelle 800.315.9950 x606 Timbco 425 Feller Buncher - 1996. with Quadco hot saw. 40” tilt, new pump and drive motor. Great shape. - Item ID-11031 - Michelle 800.315.9950 x606 Timbco 425 with Bar Saw Head - 2002. powered by a 260-hp Cummins engine. Has 33” Timbco Bar saw head. Has 3300 hrs, in good condition and very work ready. - Item ID-11340 - Michelle 800.315.9950 x606 Timbco Forwarder - 1998. with 10,000 hrs. - Item ID-11599 - Daren 800.315.9950 x603 Timberjack 230D Skidder 3-cylinder Detroit diesel. Hercules winch. Tires are good. Needs to be jumped across the starter, needs new starter and cylinoid. - Item ID10561 - Michelle 800.315.9950 x606 Timberjack 380 - Dual function grapple with winch. 30.5.32 rubber.

453 Detroit diesel. - Item ID-11072 Michelle 800.315.9950 x606 Timberjack 380 Grapple Skidder Esco grapple, 453 Detroit Engine.

Engine and transmission are strong,

'JOBODJOH "WBJMBCMF

SHRINK WRAP FIREWOOD/WASTEWOOD

Sell Your WOOD – $300/cord or More!

Double or triple your profits by shrink wrapping wastewood - forewood with WOOD-PAKer! Attractive various size packages can be obtained with our high production, easily operated and affordable machines. Eight machines available. The ideal equipment for producing square bundles-palletizable for ease in storage and transporting.

Inquire for free details. Video and Package samples at nominal fee.

B & B ManufacturingÊUÊÎääÇÊ7iÃÌÊ, ÛiÀÊ, >`ÊUÊ" i> ]Ê 9Ê£{ÇÈä

4OLL &REE > \ÊLL v}JëÀÞ iÌ°V ÊUÊ7iL\Ê ÌÌ«\ÉÉ i°Ã«ÀÞ iÌ°V ÉHLL v}É pins are tight. 1980. - Item ID-10950 Michelle 800.315.9950 x606 Tree Farmer 3600 - 3 wheel, hotsaw attachment, 24.5x32 rubber, 6 cylinder Cummins and 6700 hrs.

1999. - Item ID-10659 - Michelle 800.315.9950 x606 Valmet 546 - 1991. 955 head, 6 wheel drive. - Item ID-10724 - Michelle

‘08 Dynamic 570 Chipper

800.315.9950 x606

MISCELLANEOUS

9x30 Trommel Screen - This trommel is in good overall condition and is available immediately. Price includes trailer loading. The electric

2006 JD 700J Dozer w/ Winch

motors and pump for the hydraulic system is also included as well as sheet metal cover and the support structure. Belly conveyor has been

‘08 JD 2554 Harvester w/

Waratah 624 Processing Head

1900 hrs., Ready to produce. Updated drum.

New wear plates. 325HP Cummins. Can handle limbs or full tree. Easy to transport.

Very clean dozer with winch and low hours of 1869. Enclosed cab with comfort package. Runs strong and is priced to sell. Excellent value and worth a look. NC

4,700 hrs., Waratah 624 Harvesting Head.

Great for both in woods harvesting or deck processing. Get more value from every stem!

Motivated Seller! Below market price.

Item ID: 12061 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

Item ID: 12101 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

Item ID: 12087 Contact: Tom 800.315.9950 Ext. 606 www.LBXonline.com

For Classifieds Call Your LBX REP at 1-800-315-9950

The Original Lumberman’s Exchange n 31

NEW - Pitts LT42-8UL 8â&#x20AC;?

Center Drop Log Trailer Width: 8â&#x20AC;&#x2122;6â&#x20AC;?; Color: Black; Additional Info: 4-Bolsters - Log Trailer Length: 42â&#x20AC;&#x2122; Model #: LT40-8UL - Log Trailer Weight: 8,900 FOB: NC Note: Photo shows exact trailer but painted red.

Unit available is painted black.

Item ID: 12090 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com sold seperately. Low hrs. - Item ID11471 - Michelle 800.315.9950 x606 Armstrong No. 4 Band Saw

â&#x20AC;&#x2DC;08 John Deere 2554 Tracked Harvester 4700 hours; Waratah 624 Harvesting Head.

Great for both in woods harvesting or deck processing. Get more value from every stem!

Motivated Seller!

Contact: Tom 800.315.9950 Ext. 606 www.LBXonline.com Sharpener - Right handed, automatic. Complete with motors, starters, carbide face plate, â&#x20AC;&#x153;Sidewinderâ&#x20AC;? feed finger, one set of cams and a set of post brackets. - Item ID-10564 - Michelle 800.315.9950 x606 Container - Refrigerated - Electrical motor controls installed in

this 40â&#x20AC;&#x2122; container, several solid state reduced voltage starters, other starters, breakers, main transformer, etc. - Item ID-10957 Michelle 800.315.9950 x606 Cooks Sharpener - Electric band sharpener - Item ID-10898 - Michelle 800.315.9950 x606 Dip Tank System - Installed in 1996.

Tank is 10â&#x20AC;&#x2122; wide X 20â&#x20AC;&#x2122; long X 94â&#x20AC;? deep. Infeed deck is 21â&#x20AC;&#x2122; long X 13â&#x20AC;&#x2122;6â&#x20AC;? wide. Infeed rollcase is 20â&#x20AC;&#x2122; long X 66â&#x20AC;? wide. Infeed drive is 10-hp.

Outfeed rollcase is 45â&#x20AC;&#x2122; long X 66â&#x20AC;? wide. 2 storage decks, one is 20â&#x20AC;&#x2122;L X 11â&#x20AC;&#x2122;3â&#x20AC;?W the other is 20â&#x20AC;&#x2122;L X 10â&#x20AC;&#x2122;3â&#x20AC;?W. Hydraulic unit is 50-hp, 3 phase.

New cost $230,000.00. (Building in photos is not included.) - Item ID10850 - Michelle 800.315.9950 x606 Elec Route MD 500 metal detector.

- Elec Route MD 500 metal detector.

Coil unit 03100. 52â&#x20AC;? hex opening.

(32â&#x20AC;? flats.) Distance thru: 59â&#x20AC;?. - Item ID-11756 - Daren 800.315.9950 x603 Galvanized duct piping - 300â&#x20AC;&#x2122; of 18â&#x20AC;?

- $5 per foot, 300â&#x20AC;&#x2122; of 20â&#x20AC;? - $6.50 per foot, 50â&#x20AC;&#x2122; of 36â&#x20AC;? - $11 per foot, 35â&#x20AC;&#x2122; of 48â&#x20AC;? - $17 per foot - Item ID-10848 Michelle 800.315.9950 x606 Goeing Kerr Tek Tamet metal detector - 50â&#x20AC;? x50â&#x20AC;? opening.

Distance thru: 48-1/2â&#x20AC;?. - Item ID11755 - Daren 800.315.9950 x603 Hough 65 Motor for Salvage - w/ a good cummins CN6 motor & converter. - Item ID-10480 - Tom 800.315.9950 x604 Loading Ramp - Adustable height ramp, 66â&#x20AC;? x 30â&#x20AC;&#x2122;. 15,000 pound

capacity. - Item ID-10596 - Michelle 800.315.9950 x606 Lumber Carts - 15 carts available.

Fairly new, very little use. $450 each. - Item ID-10904 - Michelle 800.315.9950 x606 Lumber Carts - New - Either with US or import casters. Can also get with adjustable back-stop, $750 each with US casters, $700 each with import casters, add $225 to either for adjustable backstop. Call with any questions. - Item ID-10906 Michelle 800.315.9950 x606 MDI Metal Detector - The opening dimensions of this MDI magnetic metal detector are as follows: Width-46â&#x20AC;?, height-38â&#x20AC;? distance thru: 36â&#x20AC;?. - Item ID-11754 - Daren 800.315.9950 x603 Milling machine - Cincinnati #2 vertical milling machine. - Item ID11797 - Daren 800.315.9950 x603 Read Screen All RD90A - 1989. with two-deck screen, 2â&#x20AC;? top screen and 3/4â&#x20AC;? bottom screen. In great shape, has 2025 hrs. - Item ID-11088 Michelle 800.315.9950 x606 Round table - 12â&#x20AC;&#x2122; round turn-table in like new condition. - Item ID-11467 Michelle 800.315.9950 x606 Salem Hydraulic Unit - 20-hp, 1745 RPM, 1-1/2 hp circulating motor with 1720 RPM, Denison pump - Item ID-10851 - Michelle 800.315.9950 x606 Wood Storage Silo - Two available.

14â&#x20AC;&#x2122; diameter X 30â&#x20AC;&#x2122; cylinder size.

Caged ladders & guardrail with toe bar. Metering bins with

0 / "OX s 0RENTICE 7) s

Ă&#x153;Ă&#x153;Ă&#x153;°Â&#x201C;Ă&#x2022;Â?Ă&#x152;Â&#x2C6;Ă&#x152;iÂ&#x17D;Â&#x2C6;Â&#x2DC;V°VÂ&#x153;Â&#x201C;Ă&#x160;UĂ&#x160;Ă&#x192;>Â?iĂ&#x192;JÂ&#x201C;Ă&#x2022;Â?Ă&#x152;Â&#x2C6;Ă&#x152;iÂ&#x17D;Â&#x2C6;Â&#x2DC;V°VÂ&#x153;Â&#x201C;

Multitek Firewood Processors Increase Your Productivity and Profitability Â&#x2122; FjVa^in :fj^ebZci id GZYjXZ ndjg AVWdg 8dhih Â&#x2122; 8^gXjaVg HVl dg 7Vg 8]V^c BdYZah Â&#x2122; , BdYZah id 8]ddhZ ;gdb Â&#x2122; EgdYjXi^dc GVi^c\h je id *#* ;jaa 8dgYh EZg =djg

Made in the U.S.A.

32 n

January 2011

Visit us online at www.LBXonline.com!

â&#x20AC;&#x2DC;03 Mack w/â&#x20AC;&#x2122;99 Serco 8000 Loader 93 Mack CL713; Mac E-7 400hp engine; 20,000 lb front and 44,000 lb rear; Camel back rear suspension ; New 20-ply steel tires; Factory built double steel frame; Complete HD Mack power train (engine, trany, diff); 3:86 ratio; Jake brake and diff lockout ; 99 Serco 8000# loader with 4 squirt boom; This is a factory built Log Truck.

Item ID: 12098 Contact: Tom 800.315.9950 Ext. 606 www.LBXonline.com discharge augers. Internal â&#x20AC;&#x153;Flying dutchmanâ&#x20AC;? system. Wood or paper storage. - Item ID-10814 - Michelle 800.315.9950 x606

MOULDERS

Fukami 6-head moulder NTX150 - Item ID-11753 - Michelle 800.315.9950 x606

PALLET MACHINERY

Bob Hanna Double Head Pallet Notcher - Item ID-11815 - Michelle 800.315.9950 x606 Bronco Model 2006 - Pallet nailing system with roll-out. Was used to build 48â&#x20AC;?x40â&#x20AC;?. New in 2005.

One owner. still available as of 6/4/09 - Item ID-10542 - Michelle 800.315.9950 x606 Bronco Pallet Machine - Model 300 with stacker can do a maximum of 54â&#x20AC;? x 54â&#x20AC;? - Item ID-10678 - Michelle 800.315.9950 x606 Hawk Bandsaw Dismantler Powered by a 3-phase, 15-hp electric motor. Has a 64â&#x20AC;? table. Can be a one or two-man machine. Large tires for extended blade life. Capacity is 5080 pallets per hour. Manufactured

by Saw Service & Supply Co. - Item ID-11065 - Michelle 800.315.9950 x606 Mark I Pallet Dismantler - one-man, 62â&#x20AC;? table Mark I - Item ID-11811 Michelle 800.315.9950 x606 Pallet Chief lll auto naller Pallet Chief 3 - Item ID-11812 - Michelle 800.315.9950 x606 Press for Applying Mending Plates Pneumatic operated but is designed to easily switch over to hydraulics.

Used in a business that specialized in non-standard sized pallets. For long stringers, used this press to join shorter stringers together with a mending or truss plate. The frame is 9â&#x20AC;&#x2122; long and has 4 quick acting pneumatic cylinders to firmly hold the pieces to be joined

NEW - Pitts LB52-24D TriAxle Detach Trailer 2008 Model. No miles.

Black paint. Has Pony motor, Fold out outriggers, 5 position neck, D rings, and covered wheel wells.

Priced to sell! NC Item ID: 12089 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com in place. - Item ID-11068 - Michelle 800.315.9950 x606 Smart Bandsaw Dismantler - 64â&#x20AC;? table. Two-man operation. Less than 100 hrs on a complete rebuild.

Powered by a 15-hp 3-phase motor. Push button table height adjustment. 400-700 pallets per 8 hour shift. Manufactured by Smart Products. - Item ID-11066 - Michelle 800.315.9950 x606 Third Man Inc. Pallet Nailing Unit - Model TMN-075, S/N PJ0075, Handles Up To 48 x48, Does 3 Or 4 Stringer Pallets. - Item ID-11890 Michelle 800.315.9950 x606 Third Man Nailer with Stacker - Item ID-11809 - Michelle 800.315.9950 x606 Williams 200 H.P. Hammermill Grinder - This 200 H.P. hammermill was recently removed from a sawmill where it was being used to grind wood waste to boiler fuel for several large industrial customers. This grinder has a very large capacity and would work well in the grinding of whole pallets because it has a top opening size of 27â&#x20AC;? X 52â&#x20AC;?. This grinder is powered by a 200 H.P. electric motor that operates at 1200 RPM and uses 460 voltage for its power. The electric motor is direct coupled to the grinder through a shear coupler to prevent damage from being done to the grinder. This machine is equipped with a bar type screen that determines the size material the machine is going to produce. Of course this screen can be changed to achieve many different size materials being produced from the same machine. This machine comes with a size # 6 motor starter and 600 amp breaker which are enclosed in a large free standing electrical

2006 Barko 495 Crawler Loader 48â&#x20AC;? Hydraulic Cab Riser; 32â&#x20AC;&#x2122; reach; Totally gone through with new pins bushings and engine service. 9463 hours.

Undercarriage is 90% with 28â&#x20AC;? pads. Has delimber and bar saw slasher hydraulics. NC Item ID: 12102 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com cabinet. This is a very nice clean unit and would work ideally for many grinding applications. - Item

2007 John Deere 700J LT Dozer Only 1155 Hours!

John Deere 6068 6cyl Diesel; 6 way blade, 10â&#x20AC;&#x2122; 6â&#x20AC;&#x153; blade, EROPS, Corner bits and cutting edge good; Very clean and very good condition; No winch.

VIN #: T0700JX148380; Excellent value.

Item ID: 12094 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com ID-12011 - Daren 800.315.9950 x603

PLANERS

SAWMILL EXCHANGE North America's Largest Source of Used Portable Sawmills.

Over 800 Ads:

EdgiVWaZ HVlb^aah! 8dbbZgX^Va HVlb^aah! EVaaZi VcY 8jihidX` BVcj[VXijg^c\! ;^gZlddY BVcj[VXijg^c\!

8]^ee^c\ VcY <g^cY^c\! Ig^bbZgh! 9ZWVg`Zgh! 9gn @^ach! :Y\Zgh! GZhVlh! G^ehVlh VcY <Vc\ HVlh! AdVYZgh! BdjaYZgh VcY EaVcZgh! HVlYjhi 7adlZgh VcY 8]V^ch!

8dckZndgh$IgVch[Zgh$9ZX`h$<gZZc 8]V^c! Gdaa^c\ HidX`! and Much More!!

The Place to Sell Your Equipment 8Vaa Jh [dg V ;gZZ A^hi d[ DkZg -%% 6Yh dg id HZaa Ndjg :fj^ebZci#

800-459-2148 JH 8VcVYV

www.sawmillexchange.com

(&,& <gZZc KVaaZn GdVY '%( Â&#x2122; KZhiVk^V! 6A (*')(

For Classifieds Call Your LBX REP at 1-800-315-9950

The Original Lumbermanâ&#x20AC;&#x2122;s Exchange n 33

JOCKEY GRINDER OWNERS!!!

5IF 4FDSFU

"SF XFBS QMBUFT DPTUJOH ZPV UPP NVDI NPOFZ

â&#x20AC;&#x153;EZ-SLIDEâ&#x20AC;? TOOTH STOP */530%6$*/( & TOOTH REST

5IF QBSUT UIBU UPVDI UIF UPPUI EPOÂľU NPWF

*O 4UPDL GPS ' BOE TUZMF TBXT # BOE TUZMF DPNJOH TPPO

This Patented, Spring Loaded Design â&#x20AC;˘ Allows for EZ sliding of the grinding wheel to the tooth. â&#x20AC;˘ Eliminates the sticky divots of the old style wear plates. â&#x20AC;˘ Saves you time and money with better control of the sharpener and more consistent sharpening of your saw teeth.

The high quality stainless steel wear plate contacts the tooth as the aluminum frame and grinder move to sharpen the tooth.

This is one of the best innovations in our industry to come along in years. Where was this 30 years ago?

Kevin Mueller Mueller Brothers Timber Old Monroe, Missouri

Our sawyers say they will not go back to the old style parts.

Joe Nowak Lumberjack Hardwoods Menominee, Michigan

5IF &; 4-*%& IBT TBWFE NBOZ IBQQZ DVTUPNFST UJNF BOE NPOFZ

Call 1-800-582-0470 TODAY American 30â&#x20AC;? single surfacer. American # 444 . Thickness capacity appears to be 7â&#x20AC;?. Three knife head on ball bearings. Segmented chipbreaker and infeed rolls. (Sleeve brngs on feed rolls.) Chipbreaker bar lifts right out for ease of knife setting. Knives measure approx.

135 thou thick. 15 HP three phase on main shaft and feed rolls belt to this. Readily addaptable for line shaft use. Well guarded. A nice unit.

- Item ID-11784 - Daren 800.315.9950 x603 Complete Planer Mill - Yates American A20, 8 knife, belt driven with top and bottom profile; 54â&#x20AC;? McDonough Resaw; heaby motorized conveyor chain; XL ripper; Goff cleat machine; 2 double end trimmers; DeWalt radial arm saw. Includes all motors and dust collection systems. - Item ID-10994 Michelle 800.315.9950 x606 Greenlee 30â&#x20AC;? double surfacer - This 30â&#x20AC;? straight knife double surfacer

34 n

January 2011

has 4 knife heads with a 5â&#x20AC;? cutting circle. It opens to 7-1/4â&#x20AC;?. There are four top and four bottom feed rolls.

There is a jointer for the top head.

I was told by a planer expert that it would make a good finish planer. Item ID-11780 - Daren 800.315.9950 x603 Newman 4-sided planer - This 6-3/4â&#x20AC;? x 16â&#x20AC;? capacity 4-sided planer has been updated with separate motors for the feed, top head, bottom head, and both of the side heads.

It has sat idle for some time but is restorable. I overhauled the side heads and they have been stored inside. This machine differs from most 500 models in that it has 9â&#x20AC;? feed rolls rather than 8â&#x20AC;?. - Item ID11729 - Michelle 800.315.9950 x606 Newman S682 two sided planer.

6â&#x20AC;?x30â&#x20AC;? capacity. 6 knife heads 30â&#x20AC;? Width, 6â&#x20AC;? max. & 1/4â&#x20AC;? min. thickness cap., shortest stock 46â&#x20AC;? (not butted) 20â&#x20AC;? butted; manual thickness adjustment. Equipped

www.menomineesaw.com Â&#x2DC;vÂ&#x153;JÂ&#x201C;iÂ&#x2DC;Â&#x153;Â&#x201C;Â&#x2C6;Â&#x2DC;iiĂ&#x192;>Ă&#x153;°VÂ&#x153;Â&#x201C;

with: 40 HP - 3,600 RPM Direct drive motor to top head, 20 HP - 3,600 RPM direct drive motor to bottom head, both heads with NEWMAN 6-knife straight cutterheads, 7â&#x20AC;? max. cutting circle. - Sectional top chipbreaker with 3â&#x20AC;? wide hardened steel sections, 1-1/2â&#x20AC;? max. travel. 10 HP Mechanical feed drive, variable feed speed from 50 - 150 FPM, feed system with (6) 8â&#x20AC;? dia. feed rolls, (2) top infeed rolls sectional with 2â&#x20AC;? wide segments allowing 5/16â&#x20AC;? independent yield and 1-1/2â&#x20AC;? yield of the entire roll, max. cut top 1-1/2â&#x20AC;? and 1/4â&#x20AC;? bottom. - Item ID-11747 Michelle 800.315.9950 x606 Yates American planer, 18â&#x20AC;? model J18, 2-speeds, 3-phase, new knives, +/-.005 on the cut, ready to work! Item ID-11860 - Daren 800.315.9950 x603 Yates Model 277 30â&#x20AC;?x14â&#x20AC;? double surfacer - 40 HP top. 25 HP bottom.

6 knife heads. Opens to 14â&#x20AC;? thickness. - Item ID-11779 - Daren

800.315.9950 x603 Yates-American A-62 4 sided planer - This machine has 12 knife main heads with a 15â&#x20AC;? wide cut. The side head shafts are 1-13/16â&#x20AC;?. - Item ID11762 - Daren 800.315.9950 x603

PORTABLE SAWMILL

Bolter Mill 12â&#x20AC;&#x2122; capacity 60 hp - Item ID-11736 - Michelle 800.315.9950 x606 Timber Harvester HD-30 - powered by a 25-hp Kohler gas engine. It is a 2005. with approximately 400 hrs.

Runs great and comes with 2 boxes of blades - Item ID-12009 - Michelle 800.315.9950 x606 Timber Harvester Sawmill - 5600hrs runs and works great, cuts 30â&#x20AC;?wide and 21â&#x20AC;&#x2122;long 30hp Deutz motor fully hydraulic mill - Item ID-11895 Daren 800.315.9950 x603

RECYCLING EQUIPMENT

1991 Haybuster IG-8 tub grinder - 1100 hrs, 2â&#x20AC;? screens, john deere diesel engine, swing hammers have been replaced, discharge belt has

Visit us online at www.LBXonline.com!

by factory including HD drum, new belts, bearings Hyd. pump. babbitt knives cat 3306 turbo engine with 335 HP new brakes, new paint and decals no leaks or drips never any trouble with engine. This 2001 is in great shape and ready to work!! - Item ID-11804 - Michelle 800.315.9950 x606 2000 Morbark 3036 Whole Tree chipper - Loader, Joystick controls with A/C and heat. New drum and bearings. serial# is 4661100-3036 Item ID-11363 - Daren 800.315.9950 x603 2001 Morbark 3036 - Whole tree chipper, powered by a 325-hp Cat diesel engine; has self-loading grapple; one year old heavy duty drum and runs great. - Item ID-11587 - Michelle 800.315.9950 x606 2001 ROTOCHOPPER MC166 - 3600 hrs, Cat 3406 460 hp, includes coloring attachment - Item ID-11692 - Daren 800.315.9950 x603 2002 Brush Bandit 250 - 12â&#x20AC;? capacity disc-style chipper with auto-feed Cat 115 horsepower engine, in 2006 engine got new assembly and doghouse, 137+/- hrs on new engine, 1260+/- hrs on frame, upper feed wheel hydraulic lift, work ready! - Item ID-11835 - Michelle 800.315.9950 x606 2003 Morbark 7600 - 3200 hrs on a Cummins 12-cylinder engine, 1000 horsepower, ran daily, magnetic end pulley, wireless remote, 5X5, 8X8 screens, Twin Disc clutch, tight clutch, new mill rods, balanced mill, new lights, 85%-95% tires, very good value for a horizontal grinder this size! - Item ID-11830 - Michelle 800.315.9950 x606 2003 ROTOCHOPPER CP118 Portable wood chip processor with coloring unit. This machine runs good but has an electric problem it keeps flipping the circuit breaker for

the conveyor and auger Sold at this price As Is needing work to electric has extra screens, 2â&#x20AC;? screen. Will produce 35 - 40 yards per hour Item ID-11973 - Daren 800.315.9950 x603 2003 ROTOCHOPPER CP118 - 80hp, 790 hrs, CAT diesel engine, fixed

hammers, one-pass re-grind & coloring system. - Item ID-11287 Daren 800.315.9950 x603 2004 BANDIT 3680 Beast Horizontal Grinder - approx. 4500 hrs., working Daily - Item ID-11819 - Daren 800.315.9950 x603 2004 Bandit Beast - Powered by a

.OW /NE 0HONE 0UTS 9OU IN 4OUCH WITH 4(% 3INGLE 3OURCE FOR ALL YOUR 3AWMILL .EEDS 8DGA:N H6LB>AA B68=>C:GN INGDC: 7:GGN 86GG>6<: 9G>K:H A:L>H 8DCIGDAH DEI>B>O6I>DC Carriage Linear & Set Shaft Lewis Controls â&#x20AC;&#x153;Electronics for sawmills by sawmillersâ&#x20AC;? /Ă&#x17E;Ă&#x20AC;Â&#x153;Â&#x2DC;iÂ&#x2021; iĂ&#x20AC;Ă&#x20AC;Ă&#x17E;Ă&#x160; >Ă&#x20AC;Ă&#x20AC;Â&#x2C6;>}iĂ&#x160; Ă&#x20AC;Â&#x2C6;Ă&#x203A;iĂ&#x192;Ă&#x160;EĂ&#x160;*>Ă&#x20AC;Ă&#x152;Ă&#x192;Ă&#x160;UĂ&#x160; i>`Ă&#x20AC;Â&#x2C6;}Ă&#x160;-Â?>LLiĂ&#x20AC;Ă&#x192;Ă&#x160; Â&#x153;}Ă&#x160;/Ă&#x2022;Ă&#x20AC;Â&#x2DC;iĂ&#x20AC;Ă&#x192;Ă&#x160;UĂ&#x160; >Â&#x2DC;`Â&#x201C;Â&#x2C6;Â?Â?Ă&#x192;Ă&#x160;EĂ&#x160; Â&#x2C6;Â&#x2DC;iL>Ă&#x20AC;Ă&#x160;,iĂ&#x192;>Ă&#x153;Ă&#x160;-Ă&#x17E;Ă&#x192;Ă&#x152;iÂ&#x201C;Ă&#x192;Ă&#x160; Â&#x153;>Ă&#x20AC;`Ă&#x160;EĂ&#x160; >Â&#x2DC;}Ă&#x160; `}iĂ&#x20AC;Ă&#x192;Ă&#x160;UĂ&#x160;/Ă&#x20AC;Â&#x2C6;Â&#x201C;Â&#x201C;iĂ&#x20AC;Ă&#x192;

The Most Complete Line of Sawmill Machinery Since 1905!

Single Machine or Complete Turn-Key Operation More Production & Profit is Only One Call Away For Parts, Service & Sales

Call (423) 698-0284 #/2,%9

For Classifieds Call Your LBX REP at 1-800-315-9950

MFG

been recently replaced, only used to regrind bark - Item ID-11864 - Daren 800.315.9950 x603 1994 Duratech HD8 8â&#x20AC;&#x2122; tub grinder, has only 204 hrs on it! John Deere turbo diesel with 131 horsepower, new under belt, new roller bearing, new hydraulic pump, and new exhaust. swinging hammers on mill, 2 sets of screens included (3â&#x20AC;? and 1 7/8â&#x20AC;?), 10â&#x20AC;&#x2122; discharge conveyor, good tires, 25/16â&#x20AC;? ball hitch on trailer. original ownerâ&#x20AC;&#x2122;s manual included, ready to go to work on your yard waste or pallets! Duratech CO. also owens Hay buster. The Haybuster nane tells you that it is more for farming and the Duratech name tells you that it is for heavy duty work such as gring heavy material, but they bouth fall under the DURATECH name as the company is DURTACH INC. - Item ID-11861 Daren 800.315.9950 x603 1994 Haybuster HD-10 Tub Grinder - Powered by a John Deere Diesel Engine, Hydraulic Driven Tub and Conveyors, 10â&#x20AC;&#x2122; tub size, Hour Meter Reads: 920 Hrs, S/N: 18-149-0312 - Item ID-11693 - Michelle 800.315.9950 x606 1995 Diamond Z 936 Tub Grinder - Tub grinder with single axle. Powered by a Cat diesel engine. - Item ID-11882 - Michelle 800.315.9950 x606 1995 MORBARK 1250 - Fixed Hammers, Knuckle Boom, Cab, and 36â&#x20AC;? Tarantula Heavy Duty Grapple, Tripple Axle, Magnetized Pulley Conveyor, Cat 3412DITTA, 750HP Engine. 1st Hour Meter Replace:6425. 2nd Hour Meter Replaced: 634. - Item ID-11704 Daren 800.315.9950 x603 1995 WHO P12-56 Tub Grinder - Cat 500 hp, hyd raising tub, updated/ new hammer mill, new tub floor, clean unit ready for work. - Item ID11818 - Daren 800.315.9950 x603 1996 Morbark 2400 Chipper Twin Disc Clutch,New Paint and Decals,Panels in Great shape,Pintle Hitch,New Knives,12X16.5 Tires Item ID-11879 - Daren 800.315.9950 x603 1996 Vermeer TG400 Tub Grinder - Powered by a Cat 3406 400-hp diesel engine and has only 1432 hrs. Has discharge conveyor.

Well maintained. - Item ID-11486 Michelle 800.315.9950 x606 1997 Morbark 1200 Tub Grinder - Hour Meter Reads 1021, 3412 Cat Diesel, Morlift 350 Grapple, Excellent machine for your grinding needs. $65000 - Item ID-12035 Michelle 800.315.9950 x606 1999 CBI Model 4800 Grinder - 1680 Hrs: Twin Disc Clutch; Flex reversible fan, Remote control, Weight 93,000 lbs., Tires 445/65R22.5, New teeth, Updated hammers, Full engine service just completed; Cat 3412 engine w/12 cylinders; Ready to go to work; Very good condition - Item ID-12047 - Tom 800.315.9950 x604 2000 Morbark 30/36 - Morbark 3036 New $30,000 upgrade done

WWW CORLEYMFG COM s SALES

CORLEYMFG COM

The Original Lumbermanâ&#x20AC;&#x2122;s Exchange n 35

Why? • We use only the highest quality nickel alloy steel • NEW state of the art CNC milling centers for perfect pocket geometry • 100 + years of combined hammering and manufacturing experience • Proudly made in the USA • Stock to 10 days on standard sizes • Nations largest distributor/manufacturer of saws and knives

CALL 800-862-4544 Locations in s Hampden, ME s Meridian, MS s Florence, SC s West Monroe, LA www.usblades.net 36 n

January 2011

V12 800-hp Cat diesel engine. 2300 hrs. Photos coming soon. - Item ID-11233 - Michelle 800.315.9950 x606 2005 Rayco RC12 Chipper - John Deere engine with 500 hrs, ulsating down pressure, like new condition. Machine is capble of chipping 12” wood. This machine is all but brand new. Has been kept in garage. - Item ID-11351 - Daren 800.315.9950 x603 2006 Bandit 2680 Horizontal Grinder - Only 765 hrs; Cummins 400HP engine; 4’ wide fixed discharge belt, Wireless remote, Water dust supression system, 315/80R22.5 tires. This machine is very clean in excellent condition. - Item ID-12048 - Tom 800.315.9950 x604 2006 Morbark 18 chipper - 180hp Cat, 160 hrs, tandem axle.

10,000lbs, curbside jack, 65”x38” feed chute, 36” drum with controlable airflow, 48 gallon lockable fuel tank, manuals and paperwork included. - Item ID-11355 - Daren 800.315.9950 x603 CBI Magnum Force 4800 - 2001. 3000 hrs, magnetic head pulley, heavy duty grate liner with cutting anvil, 3412E 1000-hp Cat engine with Flexx Aire Fan. Solid steel rotor. Hammers, grate liner and discharge belt have been replaced and have less than 100 hrs on them. - Item ID-10577 - Michelle 800.315.9950 x606 Dura Tech HD-8 Tub Grinder - Haybuster tub grinder, 8’ opening on tub, 16” x 10’ discharge conveyor, trailer mounted, 215/75R17.5 tires, John Deere diesel engine 110-hp, 705 hrs. New clutch, new hitch and new oil temperature guage. Maintenance done, changed out fuel and oil filters; changed the oil. - Item ID-11803 - Michelle 800.315.9950 x606 1999 Duratech HD12’ great running tub grinder with brand new mill, new clutch pak, new tub ring, only 100 hrs on rebuilt Cat engine 460 horsepower, swing hammers, hydraulic tilt tub, 5 sets of screens included 1”, 2”, 3”, 4”, and composting screen, magnetic head pulley, 2 extra sets of hammers, includes regular tires and foamfilled tires for yard use - Item ID-11848 - Michelle 800.315.9950 x606 Duratech HD-8 - This tubgrinder has an 8’ tub with a tub extension.

It has just over 700 hrs. It is powered by a 125-hp John Deere diesel engine. It has new hammers. 1994. Tub extension is 10’3” wide and bolted on, so it can easily be removed for shipping. - Item ID-10804 Michelle 800.315.9950 x606 Duratech HD8, tub grinder w/ coloring unit - Duratech HD8 Duratech / Haybuster HD8 tub grinder with coloring attachment, John Deere, 130 horsepower, 1100 hrs, swing hammers, magnet on 5’ conveyor, variable speed tub with load sensor, 3 sets of screens, 3”, 2”, and 1.75”, 90’s model - Item ID-11867 - Daren 800.315.9950 x603 Duratech IG-10 Tub Grinder - Powered by a 300-hp diesel engine.

Has 3000 hrs. Magnet on the discharge. New hammermill and new belts. 2” screens. - Item ID-11320 - Michelle 800.315.9950 x606 Fecon 3250 Horizontal Grinder - 1995. powered by a Cat 3306.

Includes remote control. Has only 1000 hrs. - Item ID-10798 Michelle 800.315.9950 x606 Fecon MZA 2500 - 2004. 400 hrs. Cat diesel engine, 250-hp. S/N 2S000692164 - Item ID-10799 - Michelle 800.315.9950 x606 Gehrlinger - Powered by a perkins diesel and has power-shift transmission. Rated at 46,000 pounds and runs good. - Item ID-10781 - Michelle 800.315.9950 x606 Gyro Trac GT25 - Machine has 1278 hrs. - Item ID-11801 - Michelle 800.315.9950 x606 1992 Haines Bagger, single bagger, stationary, with large hopper, sealer, take-away belt, 8’ X 18” Ruff Top elevated conveyor, originally set up for bagging sand and gravel, owner used only a short while, and then it sat. always stored indoors, single phase electric see a similar model by Haines..click HERE Haines manufacturer still provides parts for this older unit. - Item ID-11826 Michelle 800.315.9950 x606 Haybuster H1000 PTO Tub Grinder - Tub has been re-inforced. Belts are almost new. Mid 80’s model. Has either 2 or 3” screen. Is 10’ wide at top of flair. TRANSPORT DIMENSIONS Width 10 ft. 3 in. (3.12 m) Length 21 ft. 4 in. (6.50 m) Height 10 ft. 2 in. (3.10 m) - Item ID11554 - Michelle 800.315.9950 x606 Haybuster IG-8 Tub Grinder - Powered by a 110-hp John Deere diesel engine. Has only 1034 hrs. Includes a 1” and 1-1/2” screen. 8’ discharge conveyor. - Item ID-11426 - Michelle 800.315.9950 x606 1993 Morbark 1050 Tub Grinder, 4100 hrs on a 3406 CAT diesel engine, Magnetic head pulley, wood chip coloring attachment, and self loader (grapple), 6 sets of screens (4 - 4x6 inch screens, 1 - 2 inch screen, and 1 - 1 inch screen), Extra hammers, tips, nuts and bolts, wheel base, and tons of other small parts, Spare (new) hammermill, Recently changed clutch, hydraulic motors and hydraulic pump, The unit can easily grind over 100 cubic yards an hour and has a variable speed control. - Item ID-11312 - Daren 800.315.9950 x603 Morbark 1200 Tub Grinder - 1993. ; rebuilt by Morbark in 1999.

Visit us online at www.LBXonline.com!

Equipped with grapple, 650-hp Cat Diesel engine, rebuilt clutch, rebuilt hammermill, oversized hammermill and wider-longer conveyor. - Item ID-10773 - Michelle 800.315.9950 x606 Morbark 1200 Tub Grinder Powered by a Cat 3412 650-hp diesel motor. Includes a Morlift 350 grapple; lots of new parts; freshly painted; air compressor; heat and A/C in the cab; magnetic head pulley. - Item ID-11660 - Michelle 800.315.9950 x606 Morbark 2400XL 20” Drum Chipper with Grapple - 2003 Morbark Model 2400XL Hurricane, 20” capacity hydraulically feed drum chipper with a Morlift 150 grapple, Cummins 260 HP turbo diesel engine, 2655 hrs, hydraulic down riggers, tung jack and chute turner, dual feed rollers. - Item ID-11678 - Daren 800.315.9950 x603 2007 Morbark 2600 Portable Grinder - 321 hrs. Portable wood hog. Powered by a 250-hp Cat diesel engine. Can choose from a 3”x5” rectangular screen or a 4” octagon screen. This machine is $220,000 new. Does have full warranty - Item ID-10743 - Michelle 800.315.9950 x606 Morbark 290 Wood Chipper - everything done and ready for spring , great machine for landscaper or a second back up machine for a small tree company; chipper has always started and chipped; extra sharpened blades; it has a cummins diesel engine; 88 horse power; has new tires and brakes - Item ID-11897 - Daren 800.315.9950 x603 MORBARK 58 3-knife Chipper, This machine is ready to work - Item ID12082 - Daren 800.315.9950 x603 1994 Morbark N-viro Mulch 2000 Powered by a 21-hp Kuboto Diesel.

Has a 5 yard infeed hopper, mixing screw and colorant pump. 35’ auger, new motor on color pump and can process around 30 yards per hour. - Item ID-10551 - Michelle 800.315.9950 x606 Powerscreen Mark II - Portable screening plant with conveyor.

- Item ID-11585 - Michelle 800.315.9950 x606 Remu MSU2-300-US Trommel Screen - Powered by a Ford 5.95L, 6-cylinder tubo diesel engine, 9’X6’ trommel screen, tandem axle, 4 conveyors, rear conveyor is a pivoting stacking conveyor.

1991. - Item ID-10998 - Michelle 800.315.9950 x606 ReTech 622 Screener - 1994. powered by John Deere diesel. Extra screens & brushes and in great shape. 1/2” and 3/8” screens. - Item ID-10762 - Michelle 800.315.9950 x606 UNIVERSAL REFINER PDR96 SUPER CONTENDER - 450 hp cummins, rebuilt engine & many wear parts replaced within 1000 hrs, machine has 6770 hrs on it. Discharge is a 20’ blower pipe. sn#PDR-96-12 - Item ID11440 - Daren 800.315.9950 x603

Vermeer 400L Tub Grinder - This grinder has a cab, grapple and magnetic head pulley. It is powered by a 400-hp Cat diesel engine. Unit is on a triple axle trailer and has only 2300 hrs. Also a folding discharge conveyor. - Item ID-10539 - Tom 800.315.9950 x604 WHO P-12 Tub Grinder - 1989. with 3486 hrs. - Item ID-11873 - Michelle 800.315.9950 x606

RESAWS

front rims, tires, batteries, reman transmission, conversion to S-cam brake assemblies on front axle, rear brake shoes, air compressor, air dryer, rear suspension w/ trunion, buckets, bushings, truss rods and frame rail, front grille, cab jack pump, recent clutch adjustment, fluids changed and more. Rubber at 75 percent, some minor leaks. Parts truck available. Hood 7000 loader w/ 22-foot boom, butt grapple and 11k#

2001 Fastline Gator 128 Band Resaw - Resaw, Single Head, 8x8 Cap. 20HP, 220V/3Ph/60Cy, S/N: 101001-66 - Item ID-12023 - Michelle 800.315.9950 x606 42” Mcdonough Band Resaw Verticle special “V” shape infeed allows cutting 4 by 4 on a diagnal.

- Item ID-10477 - Tom 800.315.9950 x604 Brewco B-1600 BRAND NEW!!!

- BRAND NEW!!! Brewco B-1600 has never been plugged in.

Owner purchased a much larger machine - Item ID-11249 - Michelle 800.315.9950 x606 Kent Resaw - 1-1/4” bands, variable speed gear box. Extra wheels and 1/2 box of bands. 10’ return. 2001.

Extended Return Belt and a Electric Band Sharpener - Item ID-10897 Michelle 800.315.9950 x606 Morgan band resaw - Morgan band resaw has automatic return belt, 220/440, 3-phase, early 90’s model Item ID-11866 - Daren 800.315.9950 x603 Morgan Four-Head Resaw - Morgan Four Head Resaw - Item ID-11810 Michelle 800.315.9950 x606

lift capacity @ 10 feet. New in last 2 years – main boom cylinder, left grapple cylinder, rod ends in right grapple and jib boom cylinders, all other cylinders repacked and/ or rebuilt as needed, external filter assembly, valve sections and spools, most swivels and hard/soft lines. Some minor leaks. will take offers! - Item ID-11796 - Michelle 800.315.9950 x606

SAW GRINDERS & STRETCHERS

ROLLING STOCK

1974 Peterbuilt Water Truck - Model 351; Good condition. Runs and pumps water well. - Item ID-12060 Tom 800.315.9950 x604 1983 Mack Cruiseliner w/tail mount 1986 Hood 7000 Series loader - Mack E6-350, 800k+ miles, 9 speed Fuller trans, 20k lb.front axle w/ floats, 44k lb. rears. New in last 2 years – windshield, paint,

For Classifieds Call Your LBX REP at 1-800-315-9950

The Original Lumberman’s Exchange n 37

Simonds Vertical Circle Saw Leveler Excellent Condition.

Low Hours-3984 Hours.

Runs and looks like new.

Ball Type KRO-9702.

Serial # 05-9702-1131.

Reduce run out with this machine allowing your saws to cut more accurately. Remove all lumps and bumps. Laser readings of the saws flatness are displayed on digital screen. Able to process saws up to 32â&#x20AC;? diameter and plate thickness up to .150â&#x20AC;? thick.

Item ID: 12084 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com Armstrong Band grinder. - Nice #4 L.H. Armstrong Band grinder. Serial RB 6642. Air back feed. 3 Stands.

Updates. Cams: 50E 4U W, 50E 4U F - Item ID-11777 - Daren 800.315.9950 x603

SAWMILL

1995 Simonds Automatic Bandsaw Leveler - 1995. Excellent Condition.

Will improve cutting accuracy, filing room safety, saw life, leveling quality and filing room productivity.

The paybacks from automatic leveling - less deviation, kerf reductions, and simplified saw maintenance. Great value and a smart investment! - Item ID-12085 Tom 800.315.9950 x604 1995 Simonds Vertical Circle Saw Leveler - Excellent Condition. Low Hrs-3984 Hrs. Runs and looks like new. Ball Type KRO-9702. Serial # 05-9702-1131 Reduce run out with this machine allowing your saws to cut more accurately. Remove all lumps and bumps. Laser readings of the saws flatness are displayed on digital screen. Able to process saws up to 32â&#x20AC;? diameter and plate thickness up to .150â&#x20AC;? thick. - Item ID12084 - Tom 800.315.9950 x604 2005 Cooks Acu-track AC 36 Heavy Duty - 2 Machine has 1300 hrs on

38 n

January 2011

Trim All â&#x20AC;&#x153;All in Oneâ&#x20AC;? Trim Saw Attachment Order through Lumbermanâ&#x20AC;&#x2122;s Exchange at great prices. This attachment can replace the bucket on a skid steer, loader/backhoe, or farm loader and turn it into a trimming saw at a fraction of the cost of large trimming machines. Reach from 23â&#x20AC;&#x2122; to 75â&#x20AC;&#x2122; depending on model. 3 models to choose from. Optional rotating saw and swing out arm for maximum flexibility and greatest performance. Clear power lines, dead limbs, or widen right of ways with 24â&#x20AC;? saw blade with carbide tips.

ItemID: 12105 Contact: Tom 800.315.9950 Ext. 606 www.LBXonline.com it, 51 HP Perkins Diesel. Runs the band saw which has a inch and half wide band on it, 12HP Kochler Gas Motor. Powers the hydrolic controls, it comes with a De-barker/ De-Mudder to save wear and tear on blades and keep them sharp, it has self log loader, and it comes with Extra Blades. Fully maintained, Oil is changed every 150 hrs. It will cut aprox on average 3,000 board foot a day. - Item ID-11902 - Daren 800.315.9950 x603 2007 Cooks Portable Sawmill with portable edger - 2007 AC36 Cooks Portable Sawmill with portable edger, 301 hrs, tires are in good condition and ready to work. 51-hp diesel, setworks, mudsaw, sharpener. Edger is a Cooks 14â&#x20AC;? - Item ID-12016 - Michelle 800.315.9950 x606 72â&#x20AC;? CSI R72 Circle Saw -. 2004, hydraulic. 20â&#x20AC;&#x2122; deck. Sold without the blade. New blade is additional $3500. Was over $40,000 new, 2 years ago. machine needs a new blade, 1500 hrs, it was used to cut logs - Item ID-10767 - Michelle

800.315.9950 x606 Armstrong #4 - Bandsaw Sharperner - complete sharpener for left hand blades from 6â&#x20AC;? to 14â&#x20AC;? wide. Comes with a complete full set of saw stands, back feed arm, and filing clamp. Features â&#x20AC;&#x153;Sidewinderâ&#x20AC;? spring loaded feed finger, carbide face plate, plastic cams, and Allen Bradley frequency drive for variable speed on the grinding wheel. Will grind 4â&#x20AC;? or narrower bands with slight modification. - Item ID-11618 Michelle 800.315.9950 x606 Baker 3630E Band Sawmill - 2001. 20â&#x20AC;&#x2122; Stationary unit powered by a 30-hp electric motor, 7.5-hp hydraulic unit.

Includes electric set works and the control & hook-up for a log deck.

Has been completely shop checked.

Can take up to a 36â&#x20AC;? diameter log. - Item ID-10566 - Michelle 800.315.9950 x606 Corley Sawmill ***SOLD*** - Model 385 Sawmill mounted on trailer frame - Item ID-10676 - Michelle 800.315.9950 x606 Frick Slab dump - Overall footprint: 58â&#x20AC;? x 18â&#x20AC;&#x2122;-3â&#x20AC;?. Plan view sketch available. This is a heavy duty well built unit. - Item ID-11786 - Daren 800.315.9950 x603 KM-16 Trimsaw - Trimsaw - Item ID11670 - Michelle 800.315.9950 x606 Log Decks - The bright colored long deck is a 30â&#x20AC;&#x2122; 2 strand with stop and loader and hydraulic drive. Strand spacing is 48â&#x20AC;?. Deck is based on 5x10 tube frame. Underneath is a 14â&#x20AC;&#x2122; 2 strand deck with 80â&#x20AC;? strand spacing. There is a gear box but no motor. Could be hydraulic or electric. can be solld separt MAKE OFFER! - Item ID-11731 - Michelle 800.315.9950 x606 Lumber Transfer - Lumber transfer 16 ft 4 strand 50 ft 4 strand Green Chain - Item ID-11669 - Michelle 800.315.9950 x606 Meadows Portable Mill - 56â&#x20AC;? sawblade, setworks, new wheels on carriage, includes 4 extra blades (2 need work). Very good condition. $6,000 worth of work to setworks and carriage. Pulley system. - Item ID-10895 - Michelle 800.315.9950 x606

SHAVING EQUIPMENT

2006 SALSCO 30 Shaving Mill - Hour meter is not working properly, 83 hp cat, Box is 102â&#x20AC;?x 30â&#x20AC;?, has a blower and all knives in blower are in good shape - Item ID-11977 - Daren 800.315.9950 x603 2007 SALSCO 30 Shaving Mill with Blower, 1686 hrs, 83 hp Cat Engine, Box is 120â&#x20AC;?x 30â&#x20AC;? - Item ID-11978 Daren 800.315.9950 x603 Shaving Mill - Shop built, set up 1 year ago. Box is 48â&#x20AC;?W x 5-1/2â&#x20AC;&#x2122;L. All electric, powered a 3-phase electric motor with converter. Comes with all electrical boxes. 2 heads with 3 knives per head. Powered by a 60-hp motor. Includes deck to feed and discharge conveyor. Processes 2 truck loads per hour. Runs about $150 per month in electric use. - Item ID-11975 - Michelle 800.315.9950 x606

4!",% 3!73 2)0 3!73 42)- 3!73 #54 /&& 3!73

Ambitrim GANG TRIM SAW

Fully adjustable. Fully automatic.

18â&#x20AC;?-diameter circular saw blades.

Saws material up to 3½â&#x20AC;? thick Ă&#x2014; 12â&#x20AC;? wide.

Call (573) 663-7711 Call toll-free: (800) 548-6914

www.logtolumber.com Dawson 2-Saw Air Trim Saw Trimmer cuts cants with operator sliding material left or right on rollers. It has manual stops, saws are foot operated. Includes a waste belt conveyor below. - Item ID-10712 - Michelle 800.315.9950 x606 Diehl air operated crosscut saw.

Suitable for behind a roller line. Has an 18â&#x20AC;? saw. - Item ID-11740 - Michelle 800.315.9950 x606 Mereen-Johnson 431-DC Gang Rip Saw with Laser - Model 431-DC, S/N: MJ-4728, 31IN Capacity, Comes with Mereen-Johnson Laser Set-Up - Item ID-12019 - Michelle 800.315.9950 x606 Newman Drop Saw Trimmer - Has 7 adjustable saws. Has built in scrap conveyor. Includes all motor and starters. - Item ID-10714 - Michelle 800.315.9950 x606 Slab Saw - New Slab Saw by Precision Mills. 1 blade. - Item ID11643 - Michelle 800.315.9950 x606

TRANSFER DECKS

3 Channel Live Deck - About 25â&#x20AC;&#x2122; long - Item ID-10896 - Michelle 800.315.9950 x606

TRIMMERS

Dawson Brothers Double End Trimmer - Comes with gas and electric motors. 30â&#x20AC;&#x2122; waste conveyor; air hoses and regulators included. - Item ID-10748 - Michelle 800.315.9950 x606

6%()#,%3 425#+ 42!),%2 6!.

1985 Wilson 20-ton Tilt Deck Trailer - excellent deck, 90% tires, air brakes, - Item ID-11591 - Daren 800.315.9950 x603 1988 Mack RW713 Day Cab Log Truck - Mack E6-350, 350 HP, 15 Speed Eaton Fuller Transmission, Spring Ride, GVWR: 52,000, Odometer Reads: 612,933, VIN: 1M2AY10Y0JM003060 - Item ID-12000 - Michelle 800.315.9950 x606 1989 International Truck with Barko Loader - Model F-2574. 228â&#x20AC;? wheelbase, 312,000 miles, 100,000 on new Cummins 400 diesel engine; tires are 70%; truck has fresh paint.

No leaks, clean and dry 1998 Barko Loader. - Item ID-11655 - Michelle

Visit us online at www.LBXonline.com!

HEAVY DUTY FORKS AT BIG SAVINGS &"&$'š i]^X` m &%š l^YZ m )-š adc\ # # # # # # # # # # # # # # # # # # # # # # # # '!)%%#%% eV^g 'š i]^X` m +š l^YZ m )-š adc\ # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # -&%#%% eV^g '"&$'š i]^X` m +š l^YZ m )-š adc\ Hjgeajh # # # # # # # # # # # # # # # # # # &!&%%#%% eV^g '"&$'š i]^X` m +š l^YZ m )-š adc\ # # # # # # # # # # # # # # # # # # # # # # # # # # &!&,%#%% eV^g '"&$'š i]^X` m +š l^YZ m +%š adc\ # # # # # # # # # # # # # # # # # # # # # # # # # # &!('*#%% eV^g '"($)š i]^X` m +š l^YZ m ,'š adc\ # # # # # # # # # # # # # # # # # # # # # # # # '!)'*#%% eV^g (š i]^X` m ,š l^YZ m +%š adc\ # # # # # # # # # # # # # # # # # # # # # # # # '!)'%#%% eV^g (š i]^X` m ,š l^YZ m ,'š adc\# # # # # # # # # # # # # # # # # # # # # '!,)%#%% eV^g (š i]^X` m ,š l^YZ m .+š adc\ # # # # # # # # # # # # # # # # # (!)(%#%% eV^g â&#x2013; ). 34/#+ â&#x2013; 3!-% $!9 3()0-%.4 â&#x2013; LET US QUOTE YOUR

30%#)!, $%3)'. &/2+3 6%29 #/-0%4)4)6% 02)#).'

Above forks have capacities from 12,000 lbs. to 30,000 lbs. per pair. ("&$'š i]^X` m -š l^YZ m +%š adc\ # # # # # # # # (!).%#%% eV^g ("&$'š i]^X` m -š l^YZ m ,'š adc\ # # # # # # # # (!-,%#%% eV^g ("&$'š i]^X` m -š l^YZ m .+š adc\ # # # # # # # # )!--%#%% eV^g Also, 4â&#x20AC;?, 5â&#x20AC;?, 6â&#x20AC;? thick forks to 168â&#x20AC;? long.

-ADE FROM ONE PIECE OF STEEL NOT WELDED 1UALITY RECOGNIZED WORLD WIDE

BAY EQUIPMENT CO. / (616) 392-1811 0 / "/8 (/,,!.$ -)#( s &!8

iÂ&#x201C;>Â&#x2C6;Â?\Ă&#x160;L>Ă&#x17E;°i¾°VÂ&#x153;J}Â&#x201C;>Â&#x2C6;Â?°VÂ&#x153;Â&#x201C;Ă&#x160;UĂ&#x160;Ă&#x153;Ă&#x153;Ă&#x153;°L>Ă&#x17E;iÂľĂ&#x2022;Â&#x2C6;ÂŤÂ&#x201C;iÂ&#x2DC;Ă&#x152;VÂ&#x153;°VÂ&#x153;Â&#x201C; 800.315.9950 x606 1989 Kenworth T800 Log Truck w/Log Trailer - Cat 3406B Diesel Engine, Fuller RT0187 18-Speed Transmission, 425 Horsepower, 80,000 GVW, 230 Wheelbase, Odometer Reads: 946,784, VIN: 1XKDDB9X6KS536125, with 1984 White Log Trailer, 26â&#x20AC;&#x2122; Length, VIN: SA100WHITLOG84529 - Item ID12001 - Michelle 800.315.9950 x606 1996 Clement End Dump Trailer, 24FT X 96IN - Tandem Axle, Spring Suspension, Air Brakes, Steel Wheels, GVW 77120, - Item ID-11997 - Michelle 800.315.9950 x606 1996 Freightliner w/Prentice 120C Knuckleboom - Knuckleboom mounted behind the cab, Cat 10 speed - Item ID-11593 - Michelle 800.315.9950 x606 1996 Peterbilt Model 377 - 1996 Peterbilt tamdan, 22-foot silage bed with end dump and hyd. gate,roll over tarp, would make a very good grain truck. 9 speed trans.

80% rubber, 475 cat engine, good truck ready to go to work. just put new shocks on front. Bed sides are 60â&#x20AC;?. - Item ID-11597 - Michelle 800.315.9950 x606 1997 Mack CH613 w/1997 Sta-Lite Log Loader Trailer - E7 Mack Engine 454-hp; 354,000 miles; 18-speed transmission; 12,000# front axles; 40,000# rear axles; Suspension Air Ride; 80% air brakes, PS, AC, airslide 5th, cruise control, hyd wet kit for log loader, alum headache rack, dual exhaust, includes 1997 Sta-Lite 45 ft x 96â&#x20AC;? log loader trailer - Item ID-

11588 - Daren 800.315.9950 x603 1998 Cargo Walking Floor Trailer, 45FT x 102IN - Tandem Axle, GVW: 68,000, Air Ride Suspension, Air Brakes, Aluminum Wheels, VIN: 1C9WX4526WC450129 - Item ID11998 - Michelle 800.315.9950 x606 1998 MACK CL713 - 1998 Mack w/ a 1998 Serco Loader, 25â&#x20AC;&#x2122; Boom, 1/4 Butt Grapple, Pintle Hitch, Tractor Package, Power Divider, Heated Mirrors, AC, Cruise Control.

Front axle 20,000, Rears 44,000, Camelback suspension, 135,155 miles, 460 hp, 18 Spd transmission.

- Item ID-11529 - Daren 800.315.9950 x603 1999 MACK CL713 - 1999 Mack CL 700 Log/Loader Truck w/Tri axle Rosa Pup E-7 Mack @ 460 hp. 8LL trans., cruise, Serco 8000 Loader, dual stack, tool box, alumin fuel tank, just had $11,000 in motor, $4,000 in trans and $6,000 in front/ rear tandems 1999 Rosa Crib Trailer 3 axle, a/ride, 22â&#x20AC;&#x2122; deck, 22.5 tires, aluminum wheels, hub piloted - Item ID-11530 - Daren 800.315.9950 x603 2002 Kenworth T800 Log Truck and Trailer - Cummins ISX, 475 HP, 18 Speed Eaton Fuller Transmission, Lift Axle, Odometer Reads: 522,028, VIN: 1NKDX4EX52S894416 with 2002 Whit-Log NBSE100 Log Trailer, GVWR: 34,000, VIN: 1W90111052SW02033 - Item ID-11999 - Michelle 800.315.9950 x606 2002 MACK GRANITE CV713 464hp, 664,500 miles, 18 spd, air ride suspension, 2002 SERCO 7500 LOADER AND 1996 ROSA PUP TIRES

AND BRAKES at 80% - Item ID-11700 - Daren 800.315.9950 x603 2003 Mack CH613 - With E7 425 Mack engine, 9 speed, wet kit, air slide fifth wheel, air ride suspension, air conditioning.

210,000 miles. Good tires. - Item ID11087 - Michelle 800.315.9950 x606 2003 Volvo Model 660 - This truck has been converted to a Toter Truck for pulling a 38 ft fifth wheel, has a 475 hp isx cummins deisel with 10 speed automatic trans. bunk bed and referigator,air ride fifth wheel, and much. much. more. - Item ID11596 - Michelle 800.315.9950 x606 25â&#x20AC;&#x2122; Deck trailer with dove tail - 25â&#x20AC;&#x2122; deck trailer with dove tail. Photos coming soon. Is a 2007. - Item ID11676 - Michelle 800.315.9950 x606 Great Lake Log Jammer - 1983.

LOG JAMMER IS A PRENTICE S/N# 90P22414 MODEL# F90, STICK ON JAMMER 20â&#x20AC;&#x2122; - Item ID-11592 - Daren 800.315.9950 x603 Hobbs End Dump - 1975. 26 feet long, 5.5 foot high sides. Cylinder weeps and tires are not good. - Item ID-11085 - Michelle 800.315.9950 x606 Johnson Short Wood Pup Trailer - 2 short wood pup trailers; tire size 11R 22.5; good condition; price is $6,000 each. - Item ID-11657 - Daren 800.315.9950 x603 Kent Pole Trailer - 1990. - Item ID11855 - Michelle 800.315.9950 x606 Kenworth W900B Logging Truck 2000. truck powered by a Cat 3406E, 550-hp. 18 speed, 460,000 miles, 430 ratio, Henrickson HN suspension,

For Classifieds Call Your LBX REP at 1-800-315-9950

Vermeer BP8000 Bale Processor Machine has big tires and remote for cab. It is not a final cut machine.

Excellent condition.

Owner ready to sell. MS Item ID: 12099 Contact: Tom 800.315.9950 Ext. 606 www.LBXonline.com

CAT 950GII Front End Loader 950G currently has 18,111 hours on meter and is equipped with Hydraulic Coupler, Automatic Greasing System, Fire Suppression, and 20.5 x 25 Tires. S/N 950GCAXR00269 WA Item ID: 12100 Contact: Tom 800.315.9950 Ext. 606 www.LBXonline.com dual exhaust, dual air cleaners.

Truck drives great. Also has a 2004 Serco 8500 Log Loader with cooler and extenda boom mounted behind the cab. 22â&#x20AC;&#x2122; log body. - Item ID-11478 - Michelle 800.315.9950 x606 Nabors Pole Trailer - 1987. Truck not included with trailer. Call with questions. - Item ID-11854 - Michelle 800.315.9950 x606 Pup Trailer - 3 axle load hog pup trailer. Rebuilt in 2005. - Item ID11416 - Michelle 800.315.9950 x606 Wisconsin Tiltbed Trailer - 1973.

Two axle, fifth wheel pull, ex-forest service. Has good tires. - Item ID11084 - Michelle 800.315.9950 x606 â&#x20AC;&#x2DC;93 Mack with â&#x20AC;&#x2DC;99 Serco 8000 Loader - 93 Mack CL713; Mac E-7 400hp engine; 20,000 lb front and 44,000 lb rear; Camel back rear suspension ; New 20-ply steel tires; Factory built double steel frame; Complete HD Mack power train (engine, trany, diff); 3:86 ratio; Jake brake and diff lockout ; 99 Serco 8000# loader with 4 squirt boom; This is a factory built Log Truck. - Item ID-12098 - Tom 800.315.9950 x604

WOODWORKING

Baker BX Resaw - 2 turntables. 30-hp electric 3-phase motor - Item ID10570 - Michelle 800.315.9950 x606 McDonough 54â&#x20AC;?band saw - This is a square column, weight strain machine. The serial # is 54 1076. - Item ID-11741 - Michelle 800.315.9950 x606

The Original Lumbermanâ&#x20AC;&#x2122;s Exchange n 39

“Perfect In One Pass” .

THE LUMBERMAN’S EXCHANGE Post Office Box 1916 Columbia, Tennessee 38402

PRSRT STD. U.S. Postage PAID Permit No. 212 Pulaski, TN

Electric Electric

Diesel Diesel

Grinding Ag Biomass Grinding Ag Biomass

Grinding Forestry Biomass Grinding Forestry Biomass

Why Is Rotochopper So Special???

Why Is Rotochopper So Special???

Why is it so hard to find a used Rotochopper?

Why is it so hard to find a used Rotochopper?

Why are our customers so loyal?

Why are our customers so loyal?

Intelligent Design Intelligent Design

Technologically advanced grinders that make precisely the right Technologically advanced grinders that make precisely the right particle size for biomass fuel, landscape mulch, animal bedding, particle size for biomass fuel, landscape mulch, animal bedding, wood flour, wood pellets, gasification, cellulosic ethanol, etc. wood flour, wood pellets, gasification, cellulosic ethanol, etc.

Thrifty, energy efficient grinders built for the 21st century and Thrifty, energy efficient grinders built for the 21st century and backed up with . . . backed up with . . .

World class factory service and support.

World class factory service and support.

217 West Street 217 West Street St. Martin, MN 56376 St. Martin, MN 56376 608­452­3651 608­452­3651 320­548­3586 320­548­3586 http://www.rotochopper.com http://www.rotochopper.com info@rotochopper.com info@rotochopper.com

Give us a call and let a Rotochopper save YOUR world by grinding YOUR products . . . .

Give us a call and let a Rotochopper save YOUR world by grinding YOUR products . . . .

“PerfectInInOne OnePass” Pass”. .

“Perfect