Lumbermens Magazine January 2019

F R E E

E Q U I P M E N T

L I S T I N G S TM

HOGZILLA

®

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 381

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR** INVENTORY REDUCTION SALE NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

SAVE BIG on Overstocked Equipment Boonville, New York

Reduction Sale Itemswww.starwebhosting.net/woodsmen/ Sale Price

The Tree that Started it All!

CAT 16,000 lb Cap Forklift

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Wheel Publishing SAMSUNG Loader

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR

John Williams (888) 401-6367 ext. 701 j@lumbermens.co PRECISION 7x7 Chip Screen

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

BREWER Twin Select Cutoff Saw

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sentConveyors to­ ACTION Vibrating

morris@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

SOUTHWEST FOREST PRODUCTS EXPO CAT V160B 16,000 lb Diesel Forklift ......................................... $12,000 Fri, 25 August Sat, 26 August SAMSUNG SL150 Wheel Loader (158 HP Cummins) ............. $22,900 Hot Springs, Arkansas INTERNATIONAL Boom Truck .................................................. $12,500 www.arkloggers.com PRENTICE 210B Stationary Electric Knuckleboom Loader .... $9,500 72ND ANNUAL GREAT LAKES $400 Commercial Ice Machine ...............................................................

LOGGING & HEAVY EQUIPMENT EXPO High Bay Warehouse Lighting (approx. 30 lamps) ....................... $400 Thurs, 7 Sept - Sat, 9 Sept McDONOUGH 54" Linebar Resaw System ............................. $29,500 Escanaba, Michigan WEST PLAINS 400 Horizontal Resaw System ........................ $35,000 MID-ATLANTIC LOGGING & BIOMASS BREWCO EZ Cut Single Head Horizontal Resaw ..................... $3,500 Fri, 15 Sept Sat, 16 Sept Letson & Burpee 6' Air Strain Vertical Resaw ........................... $5,000 Selma, North Carolina DIEHL SL 52 Straight Line Ripsaw ............................................. $5,500 www.midatlantic-logging-biomass­ MID-ATLANTIC NEWMAN TubEXPO Type Knife Sharpener ............................... $9,500 expo.com/ LOGGING G360 & BIOMASS ARMSTRONG Circlesaw Stretcher ............................................ $2,500 KENTUCKY WOOD EXPO HANCHETT 413 Bandsaw Sharpener ........................................ $1,500 Fri, 15 Sept - Sat, 16 Sept WEINIG Profile Grinder ............................................................... $2,000 Lexington, Kentucky ARMSTRONG Side Pro ............................................................... $2,500 http://www.kfia.org/ KentuckyWoodExpo.aspx $1,500 IMW Dual Side Grinder ................................................................

PRECISION Scragg ................................................................... $15,000 THE PAUL BUNYAN SHOW CM& E Model 85 Left & Right ChipFri, Heads ................................ $7,500 6 Oct - Sun, 8 Oct AMERIMULCH Mulch Coloring Machine ................................... $9,500 Cambridge, Ohio www.ohioforest.org IRVINGTON MOORE 3 Arm 8' Tilt Hoist .................................... $7,000 MORBARK 640 Debarker .......................................................... $18,000 MORBARK 632 Debarker .......................................................... $15,000 MELLOTT Rosserhead Debarker ............................................. $15,000 Single Overhead Truck Loading System ................................... $4,000 HMC 50 HP Hydrostatic Carriage Drive .................................... $9,500 B & B Mfg. ............................... 18 M&F Gauge ............................. 28 CORLEY Bar Type Log Turner ....................................................... $500 B. H. ..............................

16 Meadows Mill, Inc. ................$4,000 33 Hylton 7 xPayne 42 Edger .....................................................................

29 Baker ......................................

7 Menominee Saw .....................$2,500 Unknown Gang-Edger Combo5,...................................................

CORLEY 648 Edger..................... .....................................................................

30 Bell's Machining 27 Metal Detector's Inc. ..............$1,000 BUSH 48"Force DropMfg Feed Chipper ....................................................

Brute . .....................

31 Midwest Sharpening..............$3,500 26 PRECISION 10 x 10 Chip Screen ................................................ $9,500 Buck Equipment (AIM) ........ 36 Morbark ..................................... 9 PROGRESS Wood & Bark Hog ................................................... $6,000 Corley Mfg .............................. 32 Multitek ................................... 12 JEFFREY 54WB Wood & Bark Hog ............................................ $8,500 CRD Metalworks .................... 25 Piper's Saw Shop.................... 13 WILLIAM C32 Wood Hog ............................................................. $8,500 40 CW Mill-ArmorHog ..............

17 Rotochopper............................$9,500 ARASMITH Wood & Bark Hog ....................................................

** INFO LINK**

The Lumberman's Exchange is CUSTOM Conveyors published monthly

by Woods CW Mill-Hogzilla ................... 15 Publishing, P.O. Box 1916, Columbia, TN 38402. All rights Dyna Products ........................ 35 reserved. All editorial/ advertorial submissions are used at the Empire Hydraulics ................... 8 discretion of the publisher and may be edited for purposes of clarity Great Lakes Mfg. .................... 34 and space. Although all efforts have Hahn Machinery ...................... 3 been made to ensure accuracy of Industry's Most Trusted Source content submitted by advertisers Hurst Boiler ............................. 14 and writers, the Lumberman's Exchange, its principles and Iron Bull ................................... 21 associates, are not held liable for errors or omissions. Reproduction, Kilgore Saw ............................. 22 in whole or part, is prohibited with­ Lignomat ................................. 24 out written consent. ©2017 Woods Publishing

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS

Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck HMC 2-Saw Trimmer with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel BM & M High Volume Screen is supported on both sides.

This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours WEST PLAINS Resaw on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

BREWER 6-Head Resaw 2010 Cardinal HD Carriage

Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for PRECISION Scragg carriage knees, husk including 48" bottom saw and 36" top saw

STACKING RAC COOPER Scragg

Row Electric ............................ 20

800-241-8983 Sawmill Exchange .................. 11

Ken Dickert, President

Select Sawmill ......................... 19 Smith Sawmill ........................... 4

Eric Doss 706-478-1581 Jim Lichucki 706-478-5498 Thomas Industrial Controls..... 10 Wes UnionDickert Grove Saw706-478-5893 & Knife.. 2, 37 The Paul Bunyan Show ......... 39

sales@benjones.com Universal Refiner ................... 23

** Financing Available **

WoodMizer ................................ l

www.BakerProducts.net

Don't See What You're Looking for Here? Search Our Complete Inventory at www.benjones.com 800.S48.6914 I S73.663.7711

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 3

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

NEW BARKO 495B

2014 JOHN DEERE 748

2014 CAT 559C

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

2013 DEERE 643K

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder 2005 BARKO 13428 Victory Ln. //395ML PO Box 124 Adams Center, NY 13606

2009 TIGERCAT 720E

Item2013 ID: 14078 CAT 525C Contact: Austin Ph: (888) 401-6367 x703 off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

2014 TIGERCAT 630E

2013 JOHN DEERE 643K

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 2018 DELFAB DF703 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per

JEWELL CARRIER

day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

TIGERCAT - It has a 2013 353 Detroit diesel, 40726E inch insert tooth circle saw, 30 foot  Issue 364 381

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

BARKO 595BItem ID 20,000lb goose neck trailer.

13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

Firewood Processor - This is

2013 BARKO495

Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID

- Pumps recently redone. 400 hrs

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

1995 Barko 775 B Feller Buncher

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

2014 and TIGERCAT 620E manuals receipts. Purchased

2014 TIGERCAT 720E 1999 Barko 160D - new engine with

Sam x702

meter dont work. The last 2 owners

new for $32,500. Item ID 13865.

LOGGING EQUIPMENT BANDIT

50% or JOHN better. 475 hp Cummins 2012 DEERE 437D

Value! PA. Item ID 12062. Sam x702

BARKO

1994 Barko 160B - Electric

with John Deere power unit with

automatice firewood processor

but electronic is available.

2017 option BARKO 930B

adjustable to single two way. Great

capacity!. Item ID 13421. Sam x702

2014 TIGERCAT 620E 13238. Chris x700

1999 Bandit 1900 Tracked Disc

Has Log Lift. Uses 4-way wedge

2014 JOHN DEERE 753J

a Chomper Model 16 PDA

Handles logs up to 32”. Uses

13HP Honda motor. Manual start

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

approximately 1500 hours. Hour

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item JOHN ID 13694.

Sam x702 2015 DEERE 643L

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

TM

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

TA B LSOUTHWEST E OF C O N T E NBANDMILLS T S & HEADSAWS FOREST PRODUCTS EXPO SUBSCRIPTION: Lumbermens™, a trade newspaper for the The Tree logging, sawmilling, pallet manufacturing, and secondary wood manufacturing is free within the United States to thatindustry, Started qualifying manufacturers and industry suppliers. Please limit it All! your subscription to one free copy per company or mill location.

Danckaert Band Resaw - Roughly

Fri, 25 August - Sat, 26 August

10 hours on this machine since it D E P A R T M Ehas N TS been rebuilt, it has a 24foot in

Hot Springs, Arkansas www.arkloggers.com

feed deck 20 foot out feed deck 72ND ANNUAL GREAT LAKES CHANGE OF ADDRESS: Send address to Lumbermens™ with 44 inch wheels, Book and all the blades and 1 spare LOGGING 36" blade), Pulleys on Bearing . Parts and Since 1986, Lumbermens has changes & HEAVY EQUIPMENT EXPO Magazine, P.O. 1916, Columbia, When possible, published a Box monthly circular TN 38402. short pop-up transfer to edger, where to order included.

Item ID Thurs, 7 Sept Sat, 9 Sept bells and whistles, its a production please include an old address label.

EST

Free Equipment Listings......................... 6 reaching sawmills, loggers, ..............................................

14 Escanaba, Michigan belted rollcaseStory to clear Time. slabs and 12846. Sam x702 machine, with air strain conveyers pallet makers, recyclers and REPRODUCTION AND RESPONSIBILITY: Advertisers are CHIPPERS cuts from sawline, log stop and that go up and down, with airbags, industrial responsible woodworking for the contents plants and claims of their advertising.

Deals of theLOGGING Month................................

16 & BIOMASS 58 Chip Pac - Single chute drop logs MID-ATLANTIC onto carriage, Precision Lumbermens™ accepts no responsibility forloader their claims.to No part worldwide. it includes two sets of Mcdonough Fri, 15 Sept Sat, 16loading Sept of this publication may be reproduced or transmitted in any form or log heavy duty turner under log .-.......................................... system,. Item ID 12764.38 Ad Directory.

PUBLISHER pressure guides. Top Casting wheel by any means, electronic or mechanical, including photocopying, Selma, North Carolina 1986Publishing Woods

LIST

SELL

EXCHAN G Ex702 B U Y Sam

SAVE

stop and loader to deal with big

recording or any information storage retrieval system, without www.midatlantic-logging-biomass­ is supported on both sides. This onto carriage and track and Trelan Chipper - This is a remote MID-ATLANTIC permission of Lumbermens™.

Negatives,logs artwork, and other ADVERTISING SALES expo.com/ LOGGING & BIOMASS EXPO an extremely accurate machine frame. Significant new spare parts chipper that is has been totally rebuilt items submitted publication in Lumbermens™ are the MorrisforWoods property of advertisers.

Lumbermens ™ owns material typeset in ve1y good condition, Cuts 130 to be negotiated separately .

Item ID with about 840 hours except for the (888) 401-6367 ext. 704 KENTUCKY WOOD EXPO and/or designed by Lumbermens ™ and reserves the right to its of morris@lumbermens.co 13198. Sam x702 V-12 Caterpillar power unit.

New feet a minute also has CLT presses.

Fri, 15 Sept - Sat, 16 Sept use outside of Lumbermens™. Lumbermens™ will exercise every the Manual Four Head Block -Lexington, ManualKentucky clutches, disc, bearing, liners and MARKETING DIRECTOR precaution in writing, designing, and printing material contained Item ID 13876. Austin x703 Williams within. We John shall not be liable for omissions or typographical Four Head Block Mounted on custom chute.

23” in opening http://www.kfia.org/ S & W 125 Band Mill with and errors.(888) 401-6367 ext. 701 all steel carriage. Husk. Manual V-12 Cat with 750-800 hp rating.

KentuckyWoodExpo.aspx

lS Month om ApriL

oodmIzer LT 40 j@lumbermens.co DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

The Tree MAILING ADDRESS

Caterpillar generator - Low hours

on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

EquipmEnt REpREsEntativEs EST 1986 Cambridge, Ohio EQUIPMENT REPRESENTATIVES cAll uS todAy foR All youR uSed www.ohioforest.org

works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434. needS! CALL US equiPMent TODAY FOR ALL YOUR USED EQUIPMENT SamNEEDS! x702

FREE EQUIPMENTlistings!

LISTINGS!2010 CALL –HD Carriage fREE EquipmEnt Call – Cardinal INFO(888) LINK** (888) 401-6367Carriages (Sawmill) - Cardinal 401-6367

**

CARRIAGES & DRIVES

LIST

SELL

EXCHANGE

BUY

SAVE

Carriage line it includes carriage

Ted Schultz

Walker Woods Sam B & B Mfg. ...............................

18 Wall M&F Gauge ............................. 28 P.O. Box 1916 with onboard log turners, carriage that Started AD Sales Columbia, TN 38402-1916 (888)33401-6367 (888) 401-6367 ST SELL EXCHANGE Y ..............................

S A V E (888) B.BH.UPayne 16 401-6367 Meadows Mill, Inc. ................ drive, hyd pac for carriage, (888) 401-6367 d: 14061 (888) 401-6367 it All! Ext. 701 Ext. 707 Ext. 702 t: Austin x703 Baker ...................................... 5, 7 Menominee Saw ..................... 29 sawyers cab, computer controls, AD Ext. 704 ESUBMISSIONS S T 1986 Since 1986, Lumbermens™ has May abemonthly sent to­circular published JoHn deere morris@lumbermens.co reaching sawmills, loggers, pallet 548G3 makers, recyclers and industrial POSTMASTER woodworking plants worldwide.

Send address changes to: Lumberman's Exchange P.O. Box 1916 PUBLISHER Columbia, TN 38402 Woods Publishing

The Lumberman's Exchange is DESIGN DIRECTOR published monthly

by Woods Ted Monnin Publishing, P.O. Box 1916, Columbia, TN 38402.

All rights ed PRice MAILING ADDRESS reserved. All editorial/ advertorial d: 14021 P.O. Box 1916 submissions are used at the t: Sam x702 Columbia, TN 38402-1916 discretion of the publisher and may (888) 401-6367 be edited for purposes of clarity and space. Although all efforts have AD SUBMISSIONS been made to ensure accuracy of May be sent to— content submitted by advertisers morris@lumbermensco.com and writers, the Lumberman's Exchange, its principles and POSTMASTER associates, are not held liable for Send address Reproduction, changes to: errors or omissions.

Lumbermens™ Magazine in whole or part, is prohibited with­ Box 1916 out writtenP.O. consent. d: 14061 Columbia, TN 38402 ©2017 Woods Publishing t: J Williams x701

AbTeK 344b

Morris Woods

sam@lumbermensco.com

walker@lumbermensco.com

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

48" bottom saw and 36" top saw

STACKING RAC

chris Woods Morris 40 Woods, Ad Sales CW Mill-ArmorHog .............. 17 Rotochopper............................

Phone: (888) 401-6367 Phone: (888) 401-6367 CW Mill-Hogzilla 15 Row Electric ............................

20 ext.

700 ................... ext.

704 Joe Ferrazzano Austin Woods Chris Woods Mark Laxton chris@lumbermens.co morris@lumbermens.co (888) 401-6367 Dyna401-6367 Products ........................

35 Sawmill Exchange ..................

11 (888) (888) 401-6367 (888) 401-6367

Ext. 703 Ext. 700 Ext. 709 Empire Hydraulics ...................

8 Select Sawmill .........................

19

chris@lumbermensco.com

austin@lumbermensco.com

Great Lakes Mfg. .................... 34

joe@lumbermensco.com Smith Sawmill ...........................

4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

- USED FORESTRY EQUIPMENT FOR SALE  SELL YOUR EQUIPMENT TODAY TODAY ❘ SALE ❘ l§ Austin Woods Phone: (888) 401-6367

r classifieds all toDay

teds@lumbermensco.com

Bell's Machining ..................... 27

morris@lumbermensco.com

Ext. 708

mark@lumbermensco.com

www.BakerProducts.net 800.S48.6914 I S73.663.7711

 24/7 SUPPORT  (888) 401-MENS NO. 5 401-MENS 0 SUPPORT ❘ L! Sam Wall Phone: (888) 401-6367

“Precision Under Pressure”

TM

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO)

‘93 Barko 180B Item ID: 14077

FREE EQUIPMENT LISTINGS, CALL (888) Contact: 401-MENS Austin BANDMILLS & HEADSAWS

carriage, heavy duty log turner under log stop and loader to deal with big logs onto carriage and track and frame.

Item ID 13198. Sam x702

DANCKAERT BAND RESAW Roughly 10 hours on this machine since it has been rebuilt, it has a 24 foot in feed CHIPPERS deck 20 foot out feed deck with PRECISION 58 CHIP PAC 44 inch wheels, and all the bells Single chute loading system. and whistles, its a production Item ID 12764. Sam x702 machine, with air strain conveyers COMPLETE SAWMILLS that go up and down, with airbags, it includes two sets of 2006 WOODMIZER LT300 Mcdonough pressure guides. Top This mill is currently running, Casting wheel is supported on and includes the sawmill, and both sides. This is an extremely cab. An incline conveyers, a accurate machine in very good transfer table and two sets condition, Cuts 130 feet a minute of roller tables. This mill saws 13428 also has CLTVictory presses.Ln. // PO Box 124 a million board feet or more Adams Center, NY 13606 of walnut every year. Max log Item ID 13876.

Austin x703 CARRIAGES & DRIVES diameter 36in, Max Width of cut 25in, The width of the 2010 CARDINAL HD band is 1 1/2 Inches. Video of CARRIAGE CARRIAGES Cardinal Carriage line it includes it operating is available, and carriage with onboard log can be sent upon request.

Item ID 13892. Austin x703 turners, carriage drive, hyd DRY KILNS pac for carriage, sawyers cab, computer controls, cabinet with MEC 12 X 38 ‘05 Gehl CTL 70DRYER electronic drives for carriage TRIPLE PASS DRUM Item ID:with JW-986495 knees, husk including 48” Comes trunnions, drum Contact: J Williams bottom saw and 36” top saw, drive, fan and cyclone.

Ph: (888) 401-6367 x701 short pop-up transfer to edger, Item ID 13925.

Austin x703 ‘83 John Deere belted rollcase to clear slabs and cuts from sawline, log stop 4850 MEC 12 X 42 chain conveyer, way splitter, on and loader to drop logs onto TRIPLE PASS8DRUM DRYER Item ID: 14073 20,000lb goose neck trailer.

Item ID 12 x 42 Mec triple pass Drum Contact: Austin Dryer, comes with trunnions.

13916. Austin x703 Ph: (888) 401-6367 x703 Item ID Portable 13924. Austin x703 Best Value Log Splitter

with 1700 hours, in very good

PAQ II RESAW drum design. Can easily load 42’ condition. Easily produces high

quality chips with patented ‘Cone’ Makes 1 orproduce 2 cuts in one plane vans and 6 - horizontal 8 loads per

day.

Item ID2013882. x703 Power: Two HP TEFCAustin electric motors

&xGANGS MaterialEDGERS Capacity: 8” 12” Brewco Saws Two Versatility: Rip 2-sided Brewco slabs, sizeSaws and 3-sided cants, 4-sided cants, in resaw excellent condition.

Runs great. and boards Item ID 13644. Sam x702 Variable-Speed Feedworks: FIREWOOD PROCESSORS Hydraulic-powered rough-top belting 2010 Built Wood Processor andShop hold-down wheel - It has a 353 www.BakerProducts.net Detroit diesel, 40

800.548.6914 | 573.663.7711 inch insert tooth circle saw, 30 foot

 Issue 364 381

DYNAMIC CHIPPERS - Small manufacturer in PA has

2004 JCB 441 WHEEL LOADER made the best valued log splitter.

3,509 hours on this machine, Handles logs up to Uses I have everything works as32”. it should.

13HP Honda available motor. Manual start many videos of it running, and can be sent upon request. but electronic option is available.

Item 13888.

Austin x703 Has LogID Lift.

Uses 4-way wedge adjustable to single two way. Great

2008 DYNAMIC 585 CHIPPER Value!

ID 12062.

Samcone x702 This isPA.a Item 2008 dynamic Firewood Processor a head chipper with- This 1700is hours, in very good condition.

Easily homemade processor with a 10’ produces high quality chips with log deck. Has a hydraulic grapple, patented ‘Cone’ drum design. chain and kicker that all runs off Can easily load 42’ vans and of a 4 cylinder produce 6 - 8Mercedes loads perpower day. unit.

Has 4’ chain Austin saw thatx703 kicks Item IDa 13882.

Lumbermens™  since 1986

❘

Item ID: JW-909632 FIREWOOD PROCESSORS Contact: J Williams 2010401-6367 SHOP BUILT Ph: (888) x701 WOOD PROCESSOR It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot chain conveyer, 8 way splitter, on 20,000lb goose neck trailer.

Item ID 13916. Austin x703 FIREWOOD PROCESSOR This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, and ‘13 KMC 2500chain Track kicker that all runs off of a 4 Skidder cylinder Mercedes power unit.

Has a 4’ chain saw that kicks off Item ID: 14078 onto a conveyor.

Contact: Austin This is a very well Ph: built (888)processor.

401-6367 x703 Item ID 13820. Sam x702 PROCESSOR off FIREWOOD onto a conveyor.

This is a very

This built is a Chomper 1613820.

PDA well processor.Model Item ID automatice firewood processor with John Deere power unit Firewood - This is panel with lowProcessor hours. Control aincludes Chomper Model 16 tach, oilPDApressure, water temp and amp gauges. automatice firewood processor CutsJohn logsDeere up topower 16”. One with unit owner with and comes with all manuals and low hours. Control panel includes receipts. Purchased new for tach, oil pressure, water temp and $32,500. amp gauges.

Cuts logs up x702 to 16”.

Item ID 13865.

Sam Sam x702

LOGGING One owner and EQUIPMENT comes with all manuals andBANDIT receipts. Purchased

2004 BANDIT BEAST new for $32,500.

Item ID 13865.

Sam x702 MODEL 4680

3412LOGGING Caterpillar EQUIPMENT Diesel engine with 850 HP. 5300 hrs. Mill in good BANDIT condition. Just finished 10 Acre 1999 Bandit 1900 Disc clearing job, readyTracked to work!

Remote control. Big production capacity!

Chipper - Cat Under Carriage at Item ID 13421.

Sam x702 50% or better. 475 hp Cummins BARKO Diesel. 7500 Hours. One owner.

1994 BARKO Well maintained.

Item 160B ID 13294.

Electric knuckleboom, 30’ boom, 75hp motor, Rotobec 2004 Bandit Beast Model 4680origicontinuous grapple, 5,000 3412 Caterpillar Dieselcondition). engine nal hours. (excellent Item Chris with 850ID HP.13238.

5300 hrs.

Mill x700 in Sam x702

BELL good condition. Just finished 10

1990 BELL SUPER T Acre clearing job, ready to work!

This Bell has a brand new Duetz engine. Lever control, 33” bar,

Remote control. Big production

 List  seLL  exchange  buy  save

Ph: (888) 401-6367 x703 pump and tranny has been rebuilt not long ago. Hour meter is inop.

New paint. Runs perfect. Has heat and air, it just needs to be fixed.

Item ID 13896. Sam x702

1993 BELL SUPER T Good running condition. 33” Bar Saw. Tires at 50%. Deutz ‘95 John Deere C6 engine.

Hour meter broken.

Item ID 13543.

Sam x702 Tree Farmer

ItemBELL ID: 13920 TREE CUTTER Contact: Austin Around 1000 hours on the Ph: (888) 401-6367 x703 machine. New air cooled motor

only about 300 hours. Rebuilt dangling head. Several bars capacity!.

ItemMachine ID 13421. Sam and chains. camex702 off the job in February and is field BARKO ready.

1994 Barko 160B - Electric Item ID 13943. Austin x703 knuckleboom, 30' boom, 75hp CASE motor, Rotobec continuous

2006 CASE 440 SKID LOADER

grapple, 5,000 original hours. this With only 871 hours, (excellent machine condition.). starts, Item runs,ID and

operates like new. I have many 13238.

Chris x700 videos available and can be sent 1995 Barko 775 B Feller Buncher upon request.

Item ID 13886. Austin x703

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order.

22in 99’ CASE 850G LONG TRACK kohing head. DOZER head works great.

One ID owner machine, Item 13185. Sam x702

only 3300 original hours, has never 1999 Barko 160D - new engine with been used in the woods, it has approximately 1500 back, hours. Hour a ripper on the original meter work. The last 2carriage owners pads, dont and chains, Under is new along on have only usedwith it to new load rollers trucks or the bottom, and new sprockets. as a backup as needed. Has a CTR Item ID 13909. Austin x703 delimber, grapple has been rebuilt.

CATERPILLAR Boom cylinders have minor leaks.

1994 CATERPILLAR 320 Dry machine that is in good 94 Barko 275 condition for- Excellent the year.value The stick and low bucket cylinder have with at hours at 3,500.

5.9 been repacked. continuous It has a thumb CUMMINS grapple.and bucket on it, also has a 230 Runs Great!. Item ID 13740. Sam Waratah processing head that x702 can be sold with it. Hours are around 19k, BELL motor has been replaced a couple back.

1990 Bell Super T - Thisyears Bell has is working daily.Lever aMachine brand new Duetz engine.

Item ID 13936. Austin x703 control, 33” bar, pump and tranny Item ID 13694. Sam x702

❘

 LumbermensCO.com

1994 CATERPILLAR D4 HI TRACK WITH GRAPPLE This is an extremely low hour dozer/skidder with only 2800 actual hours. Comes with new 30” pads and chain.

Undercarriage is still in excellent shape. Fixed grapple and no winch.

Item ID 13932. Sam x702

The Tree

1996that CAT 214 MOBILE Started EXCAVATOR it All!3 tons steel with 36’ magnet shear. low hrs!

All hard has tires, Since 1986, Lumbermens 4published outriggers ideal for scrap a monthly circular business.

It also has 48’ swavel reaching sawmills, loggers, pallet makers, recyclers and up. bucket for street ditch clean industrial plants Item ID woodworking 13441. Sam x702 worldwide.

1998 CATERPILLAR PUBLISHER 515 Publishing GrappleWoods with winch, no heat or air. Open cab skidder with 9800 ADVERTISING SALES hours. Tires are 28L’s, Morris Woodsrear 90% (888) 401-6367 704new and fronts are 30%ext. with bear morris@lumbermens.co paws chains.

Item ID 13801.DIRECTOR Sam x702 MARKETING John Williams

(888) 401-6367 ext. 525B 701 2005 CATERPILLAR This is aj@lumbermens.co dual arch skidder with winch. DESIGN Very low hour skidder DIRECTOR Donna Heninger with 7900 frame hours and

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

** CALENDAR**

only 63 hours on a new engine.

EARLY 70’S CLARK 664 Continuous grapple, tires are CABLE SKIDDER 30.5’s @ 70%. This is a really some center slack, needs front nice skidder for the price. tires, comes with a spare tire.

NY STATEGearmatic WOODSMEN'S FIELD DAYS Item ID 13816. Sam x702 19 winch doesn’t Fri, 18 hold August - Sun, August good.

45320 Detroit power New York 2007 CATERPILLAR D6N LGP Boonville, unit. www.starwebhosting.net/woodsmen/ DOZER ENCLOSED CAB Item ID 13629. Sam x702 JEM Overall: Cab Heat & AC, 150HP SOUTHWEST FOREST PRODUCTS EXPO Cat C6.6L, 90% Undercarriage, EXPORT LOG26 DEBARKING Fri, 25 August - Sat, August GPS Ready, Sweeps & Rear LINE Hot Springs, Arkansas Screen, 13’6” PAT Blade, 39,500 Reconditioned 35 Nicholson www.arkloggers.com LBS, Hours: 7,867 Horsepower: A-5 debarker, cab, infeed hour 150 S/N: ALY03028. rolls, log dischage belt with 72NDglass ANNUAL GREAT LAKES Item ID 13567. Chris x700 log kickers.

Call 208-451LOGGINGside & HEAVY EQUIPMENT EXPO 0365 for details.

Thurs, 7 Sept - Sat,$279,000 9 Sept 2000 CAT 515 GRAPPLE DEERE Escanaba,JOHN Michigan SKIDDER ‘92 JOHN DEERE 590 D One Owner Runs great! MID-ATLANTIC Is it an LOGGING & BIOMASS CUTTER excellent condition. Rubber is Fri, Will 15 Sept need- Sat, pads16inSept the future, around 75% Has new Hydraulic Selma, North Carolina sprockets and rails are about pump and Charge pump. www.midatlantic-logging-biomass­ 85%, it has a 4cyl JD motor. It MID-ATLANTIC Item ID 13616. Sam x702 LOGGING & BIOMASS EXPO has aexpo.com/ Rotnee dangle hd. w/ a bar CLARK saw and a spare idler.

KENTUCKY CLARK RANGER 665D Item IDWOOD 13612.EXPO Chris x700 Tight and dry machine, rebuiltFri, 15 Sept - Sat, 16 Sept Kentucky motor. hour meter broken, It has Lexington, 1995 JOHN DEERE C6 TREE a 353 Detroit, with grapple, and http://www.kfia.org/ FARMER winch, always fires right up, andKentuckyWoodExpo.aspx Only 20 hours on a new 5.9 runs with no issues.

Cummins engine. The whole PAUL has BUNYAN SHOWand line Item ID 13748. Austin x703 THEcenter been fixed, Fri, 6 Oct Sun, 8 Oct bolt redone, transmission is Cambridge, Ohio www.ohioforest.org

** INFO LINK**

tight, center pins are good. It CLASSIFIEDS hasFOR a full speed tranny, with two reverse, with a winch. Working Call 888.401.MENS daily.

See pictures, and Item ID 13920. prices, Austin x703

Location of all equipment at 2004 648GIII JOHN DEERE www.LumberMB\ISmagazine.com

DUEL ARCH SKIDDER Slick Machine. Runs good motor BANDMILLS & HEADSAWS is in top notch condition.

Danckaert Band Resaw - Roughly Item ID 13610. Sam x702 10 hours on this machine since it

has beenJOHN rebuilt,DEERE it has a 648GIII 24foot in 2004 This machine 13000 feed deck 20 foothas out feed decktotal hours on the body, with with 44 inch wheels, and all theonly 3000 hours on the new mobells and whistles, its a production tor, comes with a set of chains, machine, with air strain conveyers working daily. that go up down, with airbags, Item ID and 13878.

Austin x703 it includes two sets of Mcdonough

2006guides.

JOHNTop DEERE 700J pressure Casting wheel

DOZER is supported on both sides. This This work horse comes with a is an extremely accurate machine winch, and new undercarriage, inisve1y good Cuts 130 it tight andcondition, dry & running daily with feet a 4500 minutehours. also has CLT presses.

Item 13883.

Austin Item IDID 13876.

Austin x703 x703 S & W 125 Band Mill with

2006 JOHN DEERE 748GIII Caterpillar generator - Low hours 8700 hours, running daily. onItem the mill, electronic computer ID 13881.

Austin x703Set

works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 7

40

used

ra

02

00

t

02

r

y

wer

w

ill

2006 JOHN DEERE 2009 JOHN DEERE 648H Phone FIREWOOD PROCESSOR315.284.4126 This is a one owner machine, This is a Chomper super 14, Faxevery switch works, interior 315.849.2045 with a 60hp engine. In very niceWebsite is very clean, radio, heat/ac. www.empirehyd.com shape. Only 171 hours, comes Air ride works as it should. with green chain conveyer. info@empirehyd.com All of Email Tires are 30.5x32. Extremely “Precision Under Pressure” the manuals for the engine, and clean machine with no leaks. the chopper itself come with it, Cutting edge on blade is as well as all of the electrical excellent, with no cracks or schematics. welds anywhere.

Item ID 13894. Austin x703 Item ID 13747. Austin x703 2012 JOHN DEERE 548GIII Single arch with winch, blade extensions, 1 new 28L and 3 @ 50%. This is still a new machine with only 3600 hours.

Item ID 13780. Sam x702

FRANKLIN

1995 FRANKLIN 170 Enclosed cab, single arch with a winch, new paint, 4 brand new 23.126 firestone tires, around 15000 hours.

Item ID 13910. Austin x703

2003 FRANKLIN Q80 GRAPPLE SKIDDER 7500 hours, but just 5000 hours on reman engine. New Radiator; New Hydraulic Pump; Comfort cab with good working heat and air; Tires at 80%.

Item ID 12450. Sam x702 GRINDMASTER

‘16 Halverson H140 SUDDRETH HORIZONTAL Skidsteer (DEMO) GRINDER

Item is ID:aJW-909632 This 60 HP low rpm Contact: J Williams Horizontal grinder, comes Ph: (888) 401-6367 x701 with a blower, and the blower connects to the grinder with a pipe. It has top and bottom infeed rolls. Overall lightly used, in really good shape. Width

‘13 KMC 2500 Track Skidder

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

5 7 0 6 • 5 4 8 • 800

off onto a conveyor. This is a very

Promotional Pricing Offer

Simonds Red Streak Hard Back ‘05 Gehl CTL 70 1-1/4” x .042 x 3/4” or 7/8” Item ID: JW-986495 L im it e d Length 13’2” Contact: J Williams

im e Ph: (888) 401-6367Tx701 O n ly

‘83 John Deere 4850 Tell us you saw it here!

$14.71 $14.27 each

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot

2002 HYDRO AX 621E Arouund 12,000 hours on this machine. Working daily.

Item ID 13884. Austin x703

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

22X380, direct drive, EROPS,

Transmission 28000.

Item ID 13738. Austin x703

1995 Barko KOMATSU 775 B Feller Buncher

- Pumps recently redone. 400 hrs

2007 KOMATSU PC220LC

on injection Log pump.Max always7000XT started w/2009

processing head.

9700 hours on good. in good working order.

22in carrier.head.

7200head hours on Log Max. kohing works great.

Excavator style. Cab guard.

Flotation pads. One owner. Very 1999 Barko 160D - new engine with good condition. approximately 1500 hours.

Hour Item ID 13464.

Sam x702 Item ID 13185. Sam x702

meter dont work. The last 2 owners

2008 have only usedKOMATSU it to load trucks or

Diesel. 7500 Hours. One owner.

Sam x702

CUMMINS continuous grapple.

50% or better. 475 hp Cummins

Value! PA. Item ID 12062. Sam x702

Engine, condition.).

Model 6BTA, (excellent Item IDClark

D61-EX DOZER Great Condition. 4511 Hours. delimber, grapple has been rebuilt.

Komatsu U/C at 95%. 35% Pads.

Boom cylinders minor leaks.

6 Way Blade.have Fully Enclosed comfort cab. Great price!

Item ID 13694.

Sam x702 Item ID Sam x702 94 Barko 27513570.

- Excellent value

but electronic option is available.

adjustable to single two way. Great

KMC TRACK SKIDDER 2500P

knuckleboom, 30' boom, John Deere Dual75hpArch

13238. Chris x700

1999 Bandit 1900 Tracked Disc

Has Log Lift. Uses 4-way wedge

BARKO

KMC 1994 Barko 160B - Electric

a Chomper Model 16 PDA

Firewood Processor - This is

Handles logs up to 32”. Uses

13HP Honda motor. Manual start

30.5-32 tires at 40%; Cummins Item ID: 13920 Engine rebuilt 1500 hours ago; Contact: Austin 8750 hours;401-6367 Quadco 22” Large Ph: (888) x703 tree saw head. Heat and A/C work. New bearings in saw.

Cutting trees capacity!.

Item today.

ID 13421. Sam x702 Item ID 13353. Sam x702

Sam x702

Chipper - Cat Under Carriage at

Well maintained. Item ID 13294.

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

good condition. Just finished 10

Acre clearing job, ready to work!

Remote control. Big production

 Issue 364 1986 381 Lumbermens List exchange it buy  to save arch with winch.

Low hours on ™  since Cat D5B Dozer❘ - Cat D5B s/n seLL  come hook up to and go your this skidder at only 3700. These

1998 HYDRO AX 611EX SAW HEAD FELLER BUNCHER with about 8800 hours.

Bunching Saw Head has large ‘93 Barko 180B pocket for accumulation Item ID: 14077 and lifting side shield for Contact: Austin notching larger trees before Ph: (888) 401-6367 x703 felling. Cummins engine. 28L tires at 60%. Decent running condition.

Item ID 13245. Sam x702

motor, Rotobec continuous Grapple, John Deere winch, Model 5,000 4000, Cummins grapple, original hours.

well built processor. Item ID 13820.

with 1700 hours, in very good

HYDRO-AX

‘95 John Deere C6 1998 711EX SAW HEAD Tree Farmer FELLER BUNCHER

PIPER’S Saw Shop

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

capacity is around 30” maybe even wider.

Item ID 13889. Austin x703

job site and put it to work to up

as a backup as needed. Has a CTR

with low at hours at 3,500. 5.9

2012 KOMATSU D61EX 15 DOZER Runs 13740. Sam with Great!. only Item 750IDHours.

Triple Rippers; Limb Sweeps; Enclosed x702 cab with Heat/AC; BELL 6 way blade; Undercarriage at 90%; Excellent 1990 Bell Super T - This Bell has Condition! a brand new Duetz engine. Lever Item ID 13459. Sam x702 control, 33” bar, pump and tranny ❘

 LumbermensCO.com

2014 KOMATSU 450 Only 1100 hours on this machine, in excellent condition.

Item ID 13937. Austin x703 LIEBHERR

2007 LIEBHERR A924C LOG HANDLER RUBBER TIRED LOG LOADER 13,000 hours. 40’ Reach with two section boom. 60” Thewith Tree Log Grapple continuous rotation. that FixedStarted Cab Riser with cab guard protection. it All! Front push blade. Tight and dry. Cleaned, Serviced, and Checked out Since 1986, Lumbermens hasfor published a monthly circular service.

Can pull loaded trailer. reaching sawmills, loggers, 4-Wheel drive and steering. pallet makers, recyclers and be Top Quality machine.

Would industrial woodworking plants great for log yard or mill work. worldwide.

Item ID 13476. Sam x702 PUBLISHER Woods Publishing 2011 LIEBHERR A904 ADVERTISING RUBBER TIREDSALES LOG Morris Woods HANDLER (888)4 401-6367 ext. 704with Liebherr cylinder engine morris@lumbermens.co great fuel economy. 11,230 MARKETING DIRECTOR hours.

Fixed cab riser. Two John Williams section boom with 38’ reach.

(888) 401-6367 ext. 701 Cab protection.

4-Wheel drive j@lumbermens.co and steer. Can pull loaded DIRECTOR trailer. DESIGN Cleaned, serviced and Donna Heninger inspected.

Tight and dry and EQUIPMENT REPS ready for work. Located in Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

** CALENDAR**

Baltimore, MD. Item ID 13477. Sam x702

discharge chute, New banding around disc, Brakes and tires are also OK, Everything 2011 LIEBHERR A924 works well Newer clutch -NY STATEwith WOODSMEN'S FIELD DAYS RUBBER TIRED LOG outboard bearing, Had Fri, 18 Cummins August - KTTA Sun, 20 August HANDLER 750 HP engine New York Liebherr 4 cylinder engine Boonville, -- needs repower. www.starwebhosting.net/woodsmen/ with great fuel economy.

Item ID 12443. Sam x702 11,230 hours. Fixed cab SOUTHWEST1997 FOREST PRODUCTS EXPO riser. Two section boom with MORBARK MODEL Fri, 25 August Sat, 26 August 38’ reach. Cab protection.

2400 CHIPPER Hot Springs, Arkansas 4-Wheel drive and steer. Has a Cumins diesel engine www.arkloggers.com Push blade. Can pull loaded and runs great. All fluids trailer. Cleaned, serviced and filters 72NDand ANNUAL GREAThave LAKES been inspected. Tight and dry and changed.

LOGGING & HEAVY EQUIPMENT EXPO ready for work. Located in ID -13429.

Thurs, Item 7 Sept Sat, 9Sam Septx702 Baltimore, MD. Escanaba, Michigan Item ID 13478. Sam x702 1999 MORBARK 1400 LINK-BELT TUB GRINDER MID-ATLANTIC LOGGING & BIOMASS Loader w/Cab; hours; Very 1997 LINKBELT 3400 HAS Fri, 15 Sept - Sat,4200 16 Sept good condition.

Located REBUILT PIERCE STROKE Selma, North Carolina in PA. Item ID 13361. Sam x702 DELIMBER www.midatlantic-logging-biomass­ MID-ATLANTIC 36” Pads&on 60% EXPO undercarriage. expo.com/ LOGGING BIOMASS 2006 MORBARK 6600 5221 hours. Good running HORIZONTAL GRINDER WOOD EXPO condition. Owner just spentKENTUCKY Approx.

6000 hours $30,000 on upgrading delimber.Fri, 15 Sept - Sat, 16 Septon this well maintained Lexington, Kentucky machine.

Item ID 12992. Sam x702 Has New Cat Dealer Rebuild http://www.kfia.org/ MORBARK 1000HP Engine at 5000 hours.

1987 MORBARK 27 WCL KentuckyWoodExpo.aspx 42” X 66-5/8” Hammermill; NEEDS MOTOR speed THEvariable PAUL BUNYAN SHOW infeed Morbark 1000 Knuckle boom system; Hammermill drive loader, 3 knife disc, Newer Fri, 6 Oct - Sun, 8 Oct includes all belts, sheaves, Cambridge, Ohio www.ohioforest.org

** INFO LINK**

FROM OUR FAMILY TO YOURS,

bushings & shields. Engine FORpanel CLASSIFIEDS gauge & emergency shut down system located Call 888.401.MENS in an anti-theft console.

See pictures, prices,&and Electronic rpm sensor auto Location of all equipment at feed system.

430 Gallon fuel tank.

238 Gallon hydraulic oil www.LumberMB\ISmagazine.com tank. IQAN control system.

Dust suppression system. Hyd BANDMILLS & HEADSAWS operated debris containment Danckaert Band Resaw - Roughly door. 16 Function radio remote.

10 hours on this machine since it Super package! Optional new has been rebuilt, it has a 24foot knife skin - $20,000 whichin is feed out feed deck half deck price20offoot new.

Item ID 12692.

Samall x702 with 44 inch wheels, and the bells and whistles, its a production

MORBARK 1200 TUB GRINDER Powered by a 3412 Cat that go up and down, with engine, 600-hp.

Tiltairbags, tub. it includes twounknown. sets of Mcdonough Hours are Please call Daren atTop Ext. 702wheel for pressure guides.

Casting more details. is supported on both sides. This Item ID 12919. Sam x702 machine, with air strain conveyers

is an extremely accurate machine WOLVERINE in ve1y good condition, Cuts 130

1995 MORBARK WOLVERINE

feet a minute also has CLT presses.

3-WHEELED FELLER BUNCHER

Item 13876.Only Austin1000 x703 hours S/N ID 4073.

on& W new 4 Mill cylinder S 125JD Band with engine.

Recently replaced 23.1 Caterpillar generator -turbo.

Low hours

tires at 50%. 16” Rapid Buncher shear head. Machine is fast works,1 1/2" good or 2" band, 22ft. track and in very condition.

CatItem 3406 ID 140KW Genset, 12531.

Sam12,400 x702 on the mill, electronic computer Set

hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal

NEW a Merry & YEAR Christmas STACKING WE WISH B &YOU B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is CW Mill-ArmorHog .............. 17 published monthly by Woods CW Mill-Hogzilla ................... 15 Publishing, P.O. Box 1916, Columbia, TN 38402. All rights Dyna Products ........................ 35 reserved. All editorial/ advertorial submissions are used at the Empire Hydraulics ................... 8 discretion of the publisher and may be edited for purposes of clarity Great Lakes Mfg. .................... 34 and space. Although all efforts have Hahn Machinery ...................... 3 been made to ensure accuracy of content submitted by advertisers Hurst Boiler ............................. 14 and writers, the Lumberman's Exchange, its principles and Iron Bull ................................... 21 associates, are not held liable for errors or omissions. Reproduction, Kilgore Saw ............................. 22 in whole or part, is prohibited with­ Lignomat ................................. 24 Chopsaw Resaw out written consent.| Model C Multi-Head ©2017 Woods Publishing

Rotochopper............................ 40

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Carriage line it includes carriage A PRODUCTIVE

Row Electric ............................ 20

THANK YOU FORSawmill A GREAT 2018, Exchange ..................

11

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

RAC

Select Sawmill ......................... 19 Smith Sawmill ........................... 4 The Paul Bunyan Show ......... 39 Thomas Industrial Controls..... 10 Union Grove Saw & Knife.. 2, 37 Universal Refiner ................... 23 WoodMizer ................................ l Model 3665D

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

www.BakerProducts.net Sawmill | Double Notcher 800.S48.6914 I S73.663.7711

❘ L!  (888) 401-MENS 401-MENS

NO. 9

up logs into 9’ lengths. Never

PRENTICE

Phone used as a delimber loader.

1988 PRENTICE 210B 315.284.4126 Fax Item ID 13784. Sam x702 New battery and starter a year 315.849.2045 ago, new alternator less than 2Website www.empirehyd.com years ago. Continuous rotation Email 2014 PRENTICE 2384C LOADER PACKAGE “Precision Under Pressure” info@empirehyd.com grapple, has 3-53 detroit engine,

lever controls, plumbed for bucksaw. Mounted on a 1978 GMC Brigadier with 6-71 detroit with a 10 speed. Runs everyday.

Item ID 13703. Sam x702

with CSI 264 Ultra Delimber and Rotobec 4048 Grapple. Only 1050 hours! Mounted on trailer with hydraulic stands. Excellent condition.

Contractor shutting down job.

Item ID 13577. Sam x702

1992 PRENTICE 210D LOADER Excellent condition, very tight loader mounted on a 1989 Mack truck with very good tires.

Item ID 13654. Sam x702

2432 2010 PRENTICE SKIDDER It has 30.5 tires al the way around and has 6,000 hours on the machine.

Item ID 13382. Sam x702

1997 PRENTICE 210E New 5.9 cummins engine, turntable bearing and seal, fuel pump and battery. Joystick, Heat and A/C, boom repinned, cylinders repacked. Total hours at 12000. Bucksaw hookup.

This loader is used to feed a chipper.

Item ID 13795. Sam x702

PRENTICE 310E Good loader for the money.

Item ID 13762. Sam x702 PRENTICE 120C BOOM TRUCK Great tires, new paint, & lights, with a 350 Cummins Engine 3 stage jake.

Item ID 13900. Austin x703

1999 PRENTICE 13428 Victory Ln. 210E // PO Box 124 1994 PRENTICE 180D LOG LOADER Comes with a bucksaw.

Adams Center, NYLevers, 13606 11,793 hours, Machine is in 11000 hours. Repacked all cylinders and valve body. This good condition, it has been sand loader has only been used to cut blasted and painted, low pro

tires 17.5.

Item ID 12759. Sam x702 210 PRENTICE LOADER MOUNTED ON 2006 TRAILER Excellent condition.

Item ID 13505. Sam x702 LATE 80’S PRENTICE 210 LOADER ‘16isHalverson H140 This a late 80’s model, it had a new motor installed 2 years ago Skidsteer (DEMO) with 3,000 hours on it, Itemaround ID: JW-909632 also comes with a circle saw.

Contact: J Williams Item ID 13879.

Austin x703 Ph: (888) 401-6367 x701 1998 PRENTICE 210E It has the 600 turbo charged cummins engine, control valves have been redone, ac/heater work, it also has slasher saw hook ups. Dry machine, working daily.

Item ID 13913. Austin x703 ROTOCHOPPER

2011 MC266T ROTOCHOPPER This great chipper withTrack only 3600 ‘13is aKMC 2500 hours. It has a 500hp C15 Caterpillar Skidder power unit. Comes with spare bolts, Itemscreens ID: 14078 teeth, and bearings.

Contact: Item ID Austin 13837. Sam x702 Ph: (888) 401-6367 x703 2014 B66TD ROTOCHOPPER This machine is still like new

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702 All Sizes Available!

BANDSAW

BLADES

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

Saws you need Item ID: JW-986495....and just about any Custom with John Deere power unit with to keep you cutting longer...

Contact: J Williams for less. Ask about FREE Shipping! low hours.

Control panel includes Ph: (888) 401-6367 x701

tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Call Marvin Miller for a quote

Best Value Portable Log Splitter 231-924-5953 (fax) 231-924-6166 Sam / 11606 x702 Brickyard Road • Holton, MI 49425

©2019 Wood-Mizer LLC

LOGGING EQUIPMENT BANDIT

- Small manufacturer in PA has

made the best valued log splitter.

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

13238. Chris x700

PDA

‘05 Gehl CTLGang 70• Edger • Scraggautomatice firewood • Trim • Split • Strob processor

‘83 John Deere 4850

2000 TIGERCAT 845B This 845B has 14000 frame hours 5000 hours onC6 an 8.3 ‘95 with John Deere cummins engine. New sprockets, Tree and Farmer bottom top rollers, rails, idlers, tracks, seat and all Item 36” ID: 13920 new A/C parts.

Track adjusters, Contact: Austin and cylinders on head Ph:all(888) 401-6367 x703have been repacked. Comes with a 22” hotsaw with 45 degree rotate.

This is aIDvery clean capacity!.

Item 13421.

Samcutter, x702 owner just wants to update.

BARKO Item ID 13939. Sam x702

(excellent condition.). Item ID

Firewood Processor TOP PERFORMING, economical blades for all primary &- This is secondary wood processing. Welded to your lengths! a Chomper Model 16 We also offer expert sharpening services, plus...

with only 1300 hours on rotor and 1600 on engine. This is a track and dolly system, which makes it easy to move. Has a magnetic head roller, 48” rotor with 28 teeth and a 700hp C-18 Caterpillar power unit.

This rotochopper sells for over ‘93 Barko 180B $600,000.00 new.

Item ItemID: ID14077 13838. Sam x702 Contact:TIGERCAT Austin Ph: (888) 401-6367 x703 2000 TIGERCAT 845B it has 8900 hrs. the Hydraulic Pump haIGERCATs 2000 hrs on it. We replaced the saw pump last summer. Ready to go!

Item ID 13619. Sam x702

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

ROW ELECTRICAL EQUIPMENT, INC.

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start

Chipper - Cat Under Carriage at

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value Diesel.

7500USED, Hours. One owner.

Has Log Lift. Uses 4-way wedge YOUR SOURCE FOR RECONDITIONED:

• Squirrel Cage Motors - CraneItem andIDMill with low atThree-Phase hours at 3,500. 5.9 adjustable to single twoMotors way. Great• DC Well maintained.

13294.• Transformers, • Gear Motors • Wound-Rotor Motors Firewood Processor - This is a • Synchronous Motors homemade processor with a 10’ • DC Motors

• • • •

Value! PA. Item ID 12062. Sam x702

Adjustable Speed Drives • Sam x702 Generators - AC and DC • 2004 Bandit Beast Model Engine-Generator Sets 4680 - • 3412 Caterpillar Diesel engine • Transformers, Single Phase

with 850 HP. 5300 hrs. Mill in log deck. Has a hydraulic P.O. Boxgrapple, 2812 • Toledo, Ohio 43606

Across/Line Magnetic Starters CUMMINS continuous grapple.

Reduced Voltage Starters Runs Great!. Item ID 13740. Sam Safety Switches x702 Phase Convertors

BELL

Fax toand : kicker WWW.RoWELECTRiCAL.CoM 800-248-4479 1990 Bell Super T - This Bell has chain that all runs off good condition. Just finished 10

Acre clearing job, ready to work! of a 4 cylinder Mercedes power 419-244-8887 rowelec@glasscity.net

- It has a 353 Detroit diesel, 40

delimber, grapple has been rebuilt.

inch insert tooth circle saw, 30 foot

a brand new Duetz engine. Lever 419-248-4479

control, 33” bar, pump and tranny Remote control. Big production unit. Has a 4’ chain saw that kicks WE ANSWER THE PHONE 24 HOURS • WE BUY USED ELECTRICAL

 Issue 364 381

Lumbermens™  since 1986

❘

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

2004 TIGERCAT 240B KNUCKLEBOOM New 5.9 cummins crate engine with 2500 hours, turntable good, 243 CSI delimber, good tires, brakes, and lights. 7500 hours.

Item ID 13666. Sam x702 2004 TIGERCAT 620C Single arch, new engine 2 months ago, hasTree about 13,500 The hours, needs a couple of that Started windows. Tires at 50%. it All! Item ID 13667. Sam x702 Since 1986, Lumbermens has 2004 TIGERCAT 630C published a monthly circular New 35.5’s on rear and 25% reaching sawmills, loggers, pallet makers, recyclers on front, comes with 2 and spares. industrial plants Engine haswoodworking 4500 hours, with worldwide.

12000 machine hours. Two new

wiring harness.

PUBLISHER Publishing Item Woods ID 13749.

Sam x702 ADVERTISING SALES 2004Morris TIGERCAT 845B Woods 401-6367 704 with (888) Waratah 622 ext.

Processor.

Newmorris@lumbermens.co screen, wheels, sprockets and wheel motor.

MARKETING DIRECTOR Owner used it for a month John Williams (888) 401-6367 701 hrs. before parking it. ext.

5,000 on 8.1 j@lumbermens.co cummins engine, and 6990 total hrs.DIRECTOR DESIGN Donna Heninger Item ID 13625.

Sam x702 EQUIPMENT REPS Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

** CALENDAR**

2005 TIGERCAT 230B 2007 TIGERCAT 250B Tight, and dry machine, W/WARATAH PROCESSOR with 16,000 hours on the 2007 Tigercat 250B Crawler with machine, new motor put in 2005 Waratah 622B Processing STATEHead.

WOODSMEN'S FIELD around 10,000 hours,NYCTR 9500 hours.

TheDAYS 622B Fri, 18 Waratah August head - Sun, 20great August Delimber trailer included, is in shape. 3 York and reversible CSI Bucksaw, Boonville, new wheel New motors on the head www.starwebhosting.net/woodsmen/ will sell with, or without all new pins and bushings. Head Bucksaw. has been totally rebuilt less than SOUTHWEST FOREST PRODUCTS EXPO Item ID 13911. Austin x703 500 hrs ago. The swing motor on Fri, 25the August 26 August carrier- Sat, has just been rebuilt Hot Springs, Arkansas 2005 TIGERCAT 822 and a new Hydraulic pump. U/C www.arkloggers.com TRACKED FELLER BUNCHER at 50%. Currently processing Good running condition. tons/day.

Runs LAKES great. Owner 72ND600 ANNUAL GREAT Tigercat 22” Hot Saw with shutting down.

LOGGING & HEAVY EQUIPMENT EXPO 40 degree tilt. New center ID -13360.

Thurs, Item 7 Sept Sat, 9Sam Septx702 bearing and swing motor. Escanaba, Michigan Undercarriage at 50% or 2009 TIGERCAT 620C better. Very clean. MID-ATLANTIC High This skidder only& BIOMASS has 10575 LOGGING hours, but well cared for byFri, hours with a cummins engine and 15 Sept - Sat, 16 Sept single owner of land clearing Selma, fire suppression system.

Tires North Carolina business. Often idledwww.midatlantic-logging-biomass­ for are 30.5 X 32 with 20% front, 1 MID-ATLANTIC hours.

Total hours 19,500. new expo.com/ rear and 1 rear at 50%, 4 tire LOGGING & BIOMASS EXPO Item ID 13575. Sam x702 chains at 40%. Dual arch and no winch, extra fuel EXPO tank and tight KENTUCKY WOOD 2006 TIGERCAT 630C center pins.

Excellent Fri, 15 Sept - Sat, 16 Sept skidder GRAPPLE SKIDDER ready to start dragging wood.

Lexington, Kentucky Very good running condition. Dual http://www.kfia.org/ Item ID 13928. Sam x702 Arch grapple. New 35.5 tires. OnlyKentuckyWoodExpo.aspx 4500 hours. Winch. Compare to 2009 TIGERCAT H250 new 630 at $310,000!

TRACKED HARVESTER THE PAUL BUNYAN SHOW Item ID 13576. Sam x702 Tigercat Model Fri, 6 Oct - Sun, 8575 Octprocessing Cambridge, Ohio www.ohioforest.org

** INFO LINK**

head. 10,880 hours. U/C at FOR CLASSIFIEDS 60%.

Everything runs well and has been very well maintained.

Call 888.401.MENS Item ID 13592. Sam x702

See pictures, prices, and Location all equipment 2010of TIGERCAT 480 at TRACKED MULCHER www.LumberMB\ISmagazine.com

3410 hours. $32,000 in recent upgrades and &repairs.

Fecon BANDMILLS HEADSAWS BH250 Mulching Head.

Danckaert Band Resaw - Roughly Item ID 13502. Sam x702 10 hours on this machine since it

has been rebuilt, it has a620D 24foot in 2011 TIGERCAT

feed foot out feed deckwith This deck is a 20 low hour skidder

only 44 5500 a all cummins with inch hours wheels,on and the

engine and a fire suppression bells and whistles, its a production system. Comes mounted on machine, with air strain conveyers 35.5 tires at 50% back and 40% that up and down, withon airbags, frontgoand good chains all 4 it includes of Mcdonough tires.

Has two thesets bigger 630 axles and no guides. winch. Top Center pins are pressure Casting wheel tight and extra fuel tank. is supported on both sides. This Item ID 13929. Sam x702 is an extremely accurate machine in ve1y goodTIGERCAT condition, Cuts 2011 845C130

feet minute alsohours. has CLT presses.

Justaover 4000 5400 head

and 340 degree rotation, Item ID 13876.

Austin x703 under-

carriage at 70%. Mercedes engine and fire suppression system.

Caterpillar generator - Low hours This is a great buy for for such a on the clean mill, electronic computer Set super track cutter. works,1 or 2" band, track Item 1/2" ID 13927.

Sam22ft. x702

S & W 125 Band Mill with

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 11

Phone: (888) 237-4195 ► Fax: (515) 598-729 99 TIGERCAT 240B LOADER 2012 TIGERCAT 724E Phone This loader is a package deal, FELLER BUNCHER 315.284.4126 2950hrs. 30.5 tires. Like new Faxportable, and mounted on a 315.849.2045 dump truck from the eighties. machine. One owner. Very wellWebsite www.empirehyd.com Also this loader can be mounted maintained.

Email back on its trailer with delimber.

Item ID 13528.

Sam x702 “Precision Under Pressure” info@empirehyd.com It has 4509 hrs on a reman Cummins engine.

2014 630 D TIGERCAT Item ID 13455. Sam x702 1300hrs like new inside 35 by 15, CB, light package, large TIGERCAT 230B grapple and wench.

This Tigercat has a Cummins 5.9 Item ID 13408. Sam x702 liter 360 Continuous roatation on the grapple w/ a 30’ reach on the 2014 TIGERCAT 630D boom. Joystick Controls, triple GRAPPLE SKIDDER Dual Arch Grapple. Just 1990 pump hydraulics, Stick and swing hours. 3 year/5000 hour PT function w/ a fully enclosed Cab. warranty. 35.5 tires with dualing Machine is located in Florida.

Item ID 13643. Chris x700 rings at 60%. Wide blade.

Winch.

TIGERCAT 250T Item ID 13526. Sam x702 TRACK LOG LOADER Cummins 8.3 engine and pumps 2015 TIGERCAT 234B have been done probably LOADER Model 234B. Only 300 8,000-9,000 hours ago. It has hours on this machine, this 45,000 hours. This machine has machine is extremely fuel never run in the woods. It has efficient, and very quiet. been in a yard the whole time.

13428 Victory Ln. //heated PO Box 124 Tracks are around 50% and this In the cab, it has Adamsseats.

Center,runs NY 13606 and cooled like machine has been extremely well taken care of! new.

Item ID 13608. Chris x700 Item ID 13880. Austin x703

Now One Phone Puts You in Touch with ThE Single Source ‘05 Gehl CTL 70 for all your Sawmill Needs!

Item ID: JW-986495 Contact: J Williams Corley Sawmill maChinery Ph: (888) 401-6367 x701

‘83 JohnTyrone DeereBerry Carriage DriveS lewiS ConTrolS opTimizaTion 4850

chain conveyer, 8 way splitter, on Item ID: 14073 Carriage Linear20,000lb & Set Shaft goose neck trailer. Item ID Contact: Austin Lewis Controls “Electronics for sawmills by sawmillers” 13916. Austin x703 Ph: (888) 401-6367 x703 Tyrone-Berry Carriage Drives & Parts • Headrig Slabbers Best Value Portable Log Splitter Log Turners • Bandmills & Linebar Resaw Systems with 1700 hours, in very good - Small manufacturer in PA has Board & Gang Edgers • Trimmers condition. Easily produces high

made the best valued log splitter.

2006 TIGERCAT 630C GRAPPLE SKIDDER Very good running condition.

Dual Arch grapple. New 35.5 tires. Only 4500 hours. Winch.

Compare to new 630 at $310,000!

Item ID 13576. Sam x702

‘162014 Halverson H140 630 D TIGERCAT 1300hrs like new inside 35 by Skidsteer (DEMO) 15, light package, large ItemCB, ID: JW-909632 grapple and wench.

Contact: J Williams Item ID 13408.

Sam x702 Ph: (888) 401-6367 x701

2014 TIGERCAT 630D GRAPPLE SKIDDER Dual Arch Grapple. Just 1990 hours. 3 year/5000 hour PT warranty. 35.5 tires with dualing rings at 60%. Wide blade. Winch.

Item ID 13526. Sam x702 TIMBCO

runs great. Working in select hardwood today.

Item ID 13548. Sam x702 1997 TIMBCO 820C CLAM BUNK FORWARDER “4000” original hours. 20.3 x 25 rubber at 70%. Hand sanded and ‘93 Barko 180B painted, brand new computer and Item ID:controls, 14077 added speed Scorpion Contact: Austin control.

2 sets of tracks , all new Ph: (888) 401-6367 x703 Lexan.

Located in Alberta, Canada.

Customer will pay shipping to closest US entry point.

Item ID 13532. Sam x702 1998 TIMBERLINE STROKE DELIMBER 8400 hours. U/C at 60%. Will crank and run. Owner retired.

Machine idle for past year.

‘95 John Deere C6 Item ID 13599. Sam x702

Tree Farmer

1996 TIMBCO T425B FB w/2008 Rotosaw ‘13 KMC 2500Intermittent Track Saw Head. Machine has 540 Skidder degree non continuous rotation Item ID: 14078 on upper.

9900 hours. New Contact: Austin Undercarriage.

New glass in cab.

Ph: (888) Very good401-6367 running x703 condition.

Rotosaw has 360 degree rotation. Cummins 6CT8.3 off onto awith conveyor. a very engine 215 This HP. isMachine

1999 ID: TIMBCO Item 13920820D CLAM BUNK FORWARDER Contact: Austin 10,300 hours.

Newx703 engine Ph: (888) 401-6367 less than 500 hours ago. Can accept bunks, but none with machine. Owner has two sets capacity!. Item ID 13421. Sam x702 of tracks like new he will add for BARKO additional $20,000.

1994 Barko - Electric Item ID160B 13494.

Sam x702

Sam x702

grapple, 5,000 original hours.

well built processor. Item ID 13820.

Firewood Processor - This is a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

‘03 John Deere manuals and receipts. Purchased 748GIII One owner and comes with all

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher 30+

Years - Pumps recently redone. 400 hrs Strong!

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

‘89 Cat D4H LGP

Item ID 13185. Sam x702

Item ID: 13851

Item ID: 13999 Contact: Austin approximately 1500 hours.

Hour Ph: (888) 401-6367 x703 Performance,

EQUIPMENT Ph: LOGGING (888) 401-6367 x702

have only used it to load trucks or

new for $32,500. Item ID 13865.

Sam x702 Sam Contact:

BANDIT

1999 Barko 160D - new engine From Price Towith meter dont work. The last 2 owners

We’re A Cord Above The Rest!

as a backup as needed. Has a CTR

Most Complete Line of Sawmill quality chips The with patented ‘Cone’ Handles logs up to 32”. Uses

Bandit Firewood Processors:  grapple Firewood Cleaners delimber, has been rebuilt.

1999 1900 Tracked Disc 8 Models

vans and produce 6 - 8 loads per

50% or better. 475 hp Cummins

Machinery drum design. Can easily load 42’

Since 1905! motor. Manual start 13HP Honda but electronic option is available.

Single Machine or Complete Turn-Key Operation Has Log Lift. Uses 4-way wedge More Production & Profit is Only One Call Away EDGERS & For GANGS adjustable to single two way. Great Parts, Service & Sales

day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws

Value! PA. Item ID 12062. Sam x702

Item ID 13644. Sam x702

homemade processor with a 10’

Call (423) 698-0284 CORLEY

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

Firewood Processor - This is a

log deck. Has a hydraulic grapple, chain and kicker that all runs off

mfg

in excellent condition. Runs great.

of a 4 cylinder Mercedes power

www.corleymfg.com inch insert tooth circle saw, 30 foot • sales@corleymfg.com unit. Has a 4’ chain saw that kicks

 Issue 364 381

Lumbermens™  since 1986

❘

Boom cylinders have minor Cabs leaks.

Chipper - Cat Under Carriage at12’, 20’  Firewood Conveyors: & 30’  Operator’s Item ID 13694. Sam x702  Firewood & Log Grapples  Free DVD

Diesel. 7500 Hours. One owner.

94 Barko 275 - Excellent value

Sam x702

CUMMINS continuous grapple.

Well maintained. Item ID 13294.

2004 Bandit Beast Model 4680 -

with low at hours at 3,500. 5.9

‘04 Hood Loader 28000 Runs Great!. Item ID 13740. Sam

Item ID: 13971 Portable • DePenDable Contact: • low MAustin aintenance BELL x703 with 850 HP. 5300 hrs. Mill in Ph: (888) 401-6367 3412 Caterpillar Diesel engine

x702

1990 Bell Super T - This Bell has 888-SPLITTER (888-775-4883)

good condition. Just finished 10

319-986-5525 Local • 2756 Kentucky Pleasant, IA Lever a brandAve, newMt Duetz engine.

Acre clearing job, ready to work!

2004 John Deere hours, 36” pads. It does have some control, 33” bar, pump and tranny Remote 648Gcontrol.

III Big production small leaks. Owner is going back

blockbuster-inc.com

Item ID: 13878 to ❘rubber cutters because his  List  seLL  exchange  buy  save  tired LumbermensCO.com 100 WWW.TREETRADER.COM ~ The World’s Largest W Contact: Austin job has changed. Item ID 13898.

Ph: (888) 401-6367 x703 Sam x702

1999 TIMBCO TF-820D FORWARDER 11k hrs on machine, new Cummins engine at around 8k hrs and has fresh drive pump & imp. pump. 28L 26 tires some great, some decent. Machine is ready to work, but could use a little fixing here and there. the bucket is sloppy could stand to be pinned and bushed. No major issues!

Item ID The 13212.

Sam x702 Tree

that Started 2000 TIMBCO 415D w/2005 it All! FABTEK 4-ROLLER PROCESSOR

21,000 hours Lumbermens on meter. Newhas JD 6 Since 1986, cylinder engine in 2011 has 7000 hours. published a monthly circular U/C at 65%.sawmills, Extensively rebuilt with reaching loggers, pallet makers, andpump, new swing motor,recyclers new charge industrial woodworking plants new high speed saw motor, new main worldwide. hydraulic pump, new oil cooler, all main cylinders repacked.

Package includes PUBLISHER Publishing extra finalWoods drive, extra computer screen, and extra swing motor. new jet fit ADVERTISINGHas SALES system. This Morris machineWoods is loaded...has pro(888) for 401-6367 ext. 704 heat system cold weather start. Has morris@lumbermens.co fire suppression system. All working!

Hydraulic Oil just totally changed (100 MARKETING DIRECTOR new gallons)John with new filters.

Williams (888) ext. x702 701 Item ID401-6367 13598. Sam j@lumbermens.co

2000 DESIGN TIMBCODIRECTOR 425D W/33” Donna Heninger BAR SAW HEAD 40 degree tilt on head. 540 EQUIPMENT REPS Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

** CALENDAR**

degree rotation on upper body.

One year old Cummins 6CT8.3 engine. Resealed pumps. Rebuilt valve bank. 90% undercarriage.

NY Fire STATE WOODSMEN'S FIELD DAYS Can accept hot saw.

Fri, suppression system. Auxiliary oil18 August - Sun, 20 August Boonville, New York cooler. Good running machine. www.starwebhosting.net/woodsmen/ Item ID 13549. Sam x702

SOUTHWEST FOREST PRODUCTS EXPO

2000 TIMBCO 445D Recent engine and pump Fri, last 25 August - Sat, 26 August winter. New sprockets and roll- Hot Springs, Arkansas www.arkloggers.com ers. 22” quadco hot saw. Owner retired. Located in Montana. 72ND ANNUAL GREAT LAKES Item ID 13790. Sam x702 LOGGING & HEAVY EQUIPMENT EXPO

Thurs, 7 Sept - Sat, 9 Sept

05 TIMBERPRO 830TF FORWARDER Escanaba, Michigan 6580 hours. Very good condition.

Tracks for all bogies. 710/45-26 tires MID-ATLANTIC LOGGING & BIOMASS at 70%. Includes bolsters and backFri, 15 Sept - Sat, 16 Sept rest. Comes with 36” grapple with Selma, North Carolina grapple saw option. Set up with harwww.midatlantic-logging-biomass­ MID-ATLANTIC vester hydraulics according to owner. expo.com/ LOGGING & BIOMASS EXPO Item ID 13161. Sam x702

KENTUCKY WOOD EXPO

2006 TIMBCO/VALMET Fri, 15 Sept - Sat, 16 Sept 445EXL W/BAR SAW Lexington, Kentucky 9200 hours. One owner machine. http://www.kfia.org/ 33” Bar Saw Head with 360 degreeKentuckyWoodExpo.aspx rotation. Tracks at 60%. Runs good and machine is tight. Reman THE PAUL BUNYAN SHOW Cummins 6BT8.3 one year old.

Fri, 6 Oct - Sun, 8 Oct Item ID 13556. Sam x702 Cambridge, Ohio www.ohioforest.org

When You Buy Your Circular Saws From B.H. Payne Austin Woods You’ve Bought the best... We Guarantee It! (888) 401-6367 ext. 703 austin@lumbermens.co

BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

** INFO LINK**

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Make Sure To Ask ForBaker Our Free, Complete Saw Catalog 5, 7 Saw Bits and Shanks ......................................

AD SUBMISSIONS Circular Knives Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth May be sentWe to­ Bell's Machining ..................... 27 Carbide Tipped Saws Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also morris@lumbermens.co Carbide Strobe ® Saws BruteCarbide ForceTips, Mfg . .....................

B.H. Payne & Company Stock & Sell Bits & Shanks, Diamond Wheels, 31 POSTMASTER Saw Manufacturers Knife Grinding Wheels, Saw Gumming Wheels & Knives.

Buck Equipment (AIM) ........ 36 Send address changes to:

Menominee Saw ..................... 29

Lumberman's Exchange Here’s What You Get With Every B.H.Corley Payne Saw Mfg .............................. 32 P.O. Box 1916 • SawsColumbia, manufactured from only the Highest Quality Nickel Alloy Steel. 25 TN 38402 CRD Metalworks ....................

Item ID: JW-113876 320

is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B.H. Payne & Company, Inc.

Dyna Products ........................ 35

Empire Hydraulics ................... 8 Great Lakes Mfg. .................... 34 Hahn Machinery ...................... 3 Hurst Boiler ............................. 14 Iron Bull ................................... 21 Kilgore Saw ............................. 22 Lignomat ................................. 24

Web Site: www.paynesaws.com

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

with onboard log turners, carriage drive, for carriage, Itemhyd ID:pac JW-492406

Contact: Williamscontrols, sawyers cab,Jcomputer

Ph: (888) 401-6367 x701for Source for bandsaw Skidder cabinet with electronic blades! drives Contact: J Williams Item ID: 13781 carriage husk including Item ID: 13936 We(888) offer the highest quality andknees, our people use the Midwest Sharpening ..............

26 welds Ph: 401-6367 x701 Contact: Sam Contact: Austin 48" bottom saw and 36" topbest saw highest level of integrity and precision to401-6367 give you the Ph: (888) x702 Morbark .....................................

Ph: (888) 401-6367 x703 9

See Detector's why we are your BeSt Metal Inc. ..............

30

bandsaw blades in the business—we ship all over the US. Multitek ...................................

12 Satisfaction always guaranteed! in very good shape and has been Piper's Saw Shop.................... 13

• Each Saw Milled with State-Of-The-Art Precision CNC Milling Machine.

4000 hours. Torque convertor The Lumberman's Exchange is Rotochopper............................ 40 CW Mill-ArmorHog ..............

17 • We Tension Your Saw to Your RPM Speed BEFORE Leaving Our Factory. transmission. 14 hole wheels. Tires published monthly by Woods CW Mill-Hogzilla ................... 15 Row Electric ............................

20 • Your Satisfaction - Completely Guaranteed.

Publishing, P.O. Box 1916, are 30.5’s at 55% and one at 80%.

Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may P.O. Box 90608 be edited for purposes of clarity Eastspace.

Point,Although GA 30364 and all efforts have been made to ensure accuracy of 404 761-8711 content submitted by advertisers Fax 404 761-5398 and writers, the Lumberman's Exchange, its principles and associates, are not held liable for “Since 1890” Reproduction, errors or omissions. in whole or part, is prohibited with­ out written consent.

E-mail: info@paynesaws.com ©2017 Woods Publishing

Ite Con Ph:

is supported on both sides. This

14’ Snow Pusher Woodmaster Call 800 752-0627 ‘94 ‘11 Caterpillar Doosan DL200 ‘88 John Deere 440D

Columbia, TN 38402-1916 (888) Circular Saws401-6367

19 44

IntegrIty • PrecIsIon • QualIty • Value

Traditional Quality Combined MAILING ADDRESS With Todays Technology B & B Mfg . ............................... 18 P.O. Box 1916

Quality Brand Reg. U.S. Pat Off

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

Sawmill Exchange ..................

Center has very little slack. This11

‘05 Transport for theSawmill several years.

Skidder has Smith ...........................

4 Trailers Custom 12000 hours. Item ID 13805. Sam The Paul Pup Bunyan Show ......... 39 Log x702

skidder has been a back up skidder Select Sawmill .........................

19

Thomas Industrial Controls..... 10 Item ID: JW-538174 1981 Timberjack 520 - Very hard to Contact: JSaw Williams Union Grove & Knife 2, 37 come by!

653 Detroit.

Runs..Great!.

Ph: (888) 401-6367 x701

Universal Refiner 23 Item ID 13741.

Sam................... x702

STACKING thIn Kerf RAC saw344B Blades ‘04Band Fabtek

well maintained. Item ID 12194.

Sam x702

‘98 Timberjack 1270B - 7,300 hrs.

Perkins 6 Cylinder Engine. All

Item ID: JW-093430 modules and computer are brand Contact: Williams new.

Tires onJ average are around Ph: (888) 401-6367 Ask About x701 Our 80% Video: http://youtu.be/R_

Dismanteling Blades MQZe5QEFw. Item ID 13572.

Chris Processor - This is a Chomper x700

super 14, with a 60hp engine. In VALMET

1998 603 3-Wheeled very Valmet nice shape.

Only 171 hours,

1-888-857-5153

Buncher - 6500 hours on conveyer. total 2002ecTimberjack 608s with hot saw comes with green chain www.BakerProducts.net k WoodMizer ................................ l Ch ut Our Quality • Our Service • Our Price 800.S48.6914 I S73.663.7711 O machine no hours -Waratah Approx.624 6000 hours, Machine is Super - New All of thebut manuals for on the4BT3.9 engine,

Computer (Logrite).  SELL YOUR EQUIPMENT TODAY for ❘ head  24/7 SUPPORT l§ TODAY 0 SUPPORT

58 Ch

Ite Con Ph:

Rem

Equi

Spee

W

40%

mac

Ite

main Co

Hard Ph

of co

avai

Item

2005

Forw

hydr box

2012

pum

cond

hour

‘89

chopper itself come with ❘ and  the (888) 401-MENS NO. 13 L! 401-MENS  Issue 364 Lumbermens  since 1986 ❘  List  seLL Ite 10500 hours. New main pump it, as well as all of the electrical  exch and auxiliary pump. New rebuilt

schematics. Item ID 13894. Austin

Co

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email an experience is about info@empirehyd.com

STORY TIME

Where have all these men gone?

This 1967 true story by a young “Precision Under Pressure” 12-year-old boy in Kingston, Ontario, Canada. It is about the vivid memory of a privately rebuilt P-51 from WW II and its famous owner/pilot.

In the morning sun, I could not believe my eyes. There, in our little airport, sat a majestic P-51. They said it had flown in during the night from some U.S. Airport, on its way to an air show. The pilot had been tired, so he just happened to choose Kingston for his stopover. It was to take to the air very soon. I marveled at the size of the plane, dwarfing the Pipers and Canucks tied down by her. It was much larger than in the movies. She glistened in the sun like a bulwark of security from days gone by.

The pilot arrived by cab, paid the driver, and then stepped into the pilot's lounge. He was an older man; his wavy hair was gray and tossed. It looked like it might have been combed, say, around the turn of the century. His flight jacket was checked, creased and worn - it smelled old and genuine. Old Glory was prominently sewn to its shoulders. He projected a quiet air of proficiency and pride devoid of arrogance.

He filed a quick flight plan to Montreal ("Expo-67 Air Show") then walked across the tarmac.

After taking several minutes to perform his walk-around check, the tall, lanky 13428 Victory Ln. man // POreturned Box 124 to the flight lounge to ask if anyone Adams would Center, be available to stand by with fire extinguishers NY 13606 while he "flashed the old bird up, just to be safe." Though only 12 at the time I was allowed to stand by with an extinguisher after brief instruction on its use -- "If you see a fire, point, then pull this lever!", he said. (I later became a firefighter, but that's another story.)

The air around the exhaust manifolds shimmered like a mirror from fuel fumes as the huge prop started to rotate. One manifold, then another, and yet another barked -- I stepped back with the others. In moments Packard-built ‘05 the Gehl CTL 70 Merlin engine came to life with a thunderous roar. Blue flames Item ID: JW-986495 knifed from her manifolds with an arrogant snarl. I looked at Contact: J Williams the others' faces; there was no concern. I lowered the bell of Ph: (888) 401-6367 x701 my extinguisher.

One of the guys signaled to walk back to the ‘83 John Deere lounge. We did. Several minutes later we could hear the pilot 4850 doing his pre-flight run-up. He'd taxied to the end of runway chain conveyer, 8 way splitter, on Item 14073 All went quiet for 19, outID: of sight. several seconds. We ran to 20,000lb trailer. Item ID Contact: the secondAustin story deck to see if we couldgoose catchneck a glimpse of the 13916. Austin x703 not. There we Ph: as (888) x703the runway.

P-51 she401-6367 started down We could stood, eyes fixed at a spot halfway down the runway.

Best Value Portable Log Splitter with Then a roar ripped across the field, much louder 1700 hours, in very good - Small manufacturerthan in PAbefore. has Like a furious hell spawn set loose -- something mighty this way condition. Easily produces high made the best valued log splitter. was coming. "Listen to that thing!" said the controller. quality chips with patented ‘Cone’ Handles logsof upsight. to 32”. Its Uses In seconds the Mustang burst into our line tail was drum design.

Canrunway easily load Honda motor. startI'd already off the and42’ it was 13HP moving faster thanManual anything ever seen.

Two-thirds the way down 19 the Mustang was airborne vans and produce 6 - 8 loads per but electronic option is available. withItem her gear going up. The supersonic.

Wewedge clasped day.

ID 13882.

Austin x703prop tips Haswere Log Lift.

Uses 4-way our ears as the Mustang climbed hellishly fast into the circuit to be EDGERS & GANGS adjustable to single two way. Great eaten up by the dog-day haze. We stood for a few moments, in Brewco Saws Two Brewco Saws Value!

PA.just Itemseen.

ID 12062. Sam x702 stunned silence, trying to digest what we'd in excellent condition.

Runsrushed great. byFirewood - This is a The radio controller me to Processor the radio.

"Kingston tower calling Mustang?"

He looked back to us as he waited Item ID 13644. Sam x702 homemade processor with a for 10’ an acknowledgment.

The radio crackled, "Go ahead, Kingston."

FIREWOOD PROCESSORS log deck. Has a hydraulic grapple, "Roger, Mustang. Kingston tower would like to advise the 2010 Shop Built Wood Processor chain and kicker that all runs off circuit is clear for a low-level pass."

- ItI has a 353 Detroit diesel, 40 of a 4 cylinder power stood in shock because the controller had Mercedes just, more or less, inch insert saw, 30for footan impromptu unit. Has a 4’air chain saw that kicks asked thetooth pilotcircle to return show!  Issue 364 381

Lumbermens™  since 1986

❘

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

The controller looked at us. "Well, He- Electric asked. "I can't 1994 What?"

Barko 160B let that guy go without asking. I couldn't forgive myself!" knuckleboom, 30' boom, 75hp off onto a conveyor. This is a very The radio crackled once again, "Kingston, do I have permission motor, Rotobec well built processor.

Item ID 13820. for a low-level pass, east to west, across thecontinuous field?" "Roger, grapple, 5,000 original hours.

Sam x702 the circuit is clear for an Mustang, east to west pass."

Firewood "Roger,Processor Kingston, I'm coming out of 3,000 feet, stand (excellent condition.). Itemby."

ID - This is a Chomper We rushed back onto the second-story deck, eyes fixed 13238. Chris x700 Model 16 PDA toward the eastern haze.

1995 Barko 775 B Feller Buncher automatice firewood processor The sound was subtle at first, a high-pitched whine, a muffled - Pumps recently redone.

400 burst hrs with John Deere power unit with screech, a distant scream. Moments later the P-51 injection pump. always started low hours.the Control panel includes through haze.

Her airframeon straining against positive G's and gravity.

Her wing tips spilling contrails of condensed air, good. in good working order. 22in tach, oil pressure, water temp and prop-tips supersonic. burnished across head.bird headblasted works great. amp gauges.again Cuts logs up to 16”. The kohing the eastern margin of the field shredding and tearing the air.

Item ID 13185. Sam x702 One owner and comes with all At about 500 mph and 150 yards from where we stood she 1999 Barko 160D - new engine with manuals and receipts.

Purchased passed with the old American pilot saluting. approximately 1500she hours.

Hour new for $32,500.

Item IDI 13865.

Imagine.

A salute! felt like laughing; like crying; glistened; she screamed; the building shook; my heart pounded.

Then meter dont work. The last 2 owners Sam x702 the old pilot pulled her up and rolled, and rolled, and rolled have only used it to load trucksout or LOGGING EQUIPMENT of sight into the broken clouds and indelibly into my memory. as a backup as needed. Has a CTR BANDIT I've never wanted to be an American more than on that day! delimber, grapple has been rebuilt.

1999 Bandit 1900 Tracked Disc It was a time when many nations in the world looked to America Boom cylinders have minor leaks.of Chipper Carriage at as their- Cat bigUnder brother.

A steady and even-handed beacon security who navigated difficult political water with grace and Item ID 13694. Sam x702 50% or better. 475 hp Cummins style; not unlike the old American pilot who'd just flown into 94 Barko 275 - Excellent value my Diesel. 7500 Hours. One owner. memory. He was proud, not arrogant; humble, not a braggart; with low at hours at 3,500. 5.9 Well maintained. Item ID 13294. old and honest, projecting an aura of America at its best. continuous grapple.

Sam x702 That America will return oneCUMMINS day! I know he will!

Until Great!.

13740. Sam 2004 Model 4680off - this Runs that Bandit time, Beast I'll just send story.

CallItem it aIDloving salute to aCaterpillar Country,Diesel and engine especially to x702 that old American pilot: the 3412 late JIMMY STEWART (1908-1997), Actor, real BELL WW II Hero with 850 HP. 5300 hrs. Mill in (Commander of a US Army Air Force Bomber Wing stationed in 1990 Bell Super T - This Bell has good condition. Just finished 10 England), and a USAF Reserves Brigadier General, who wove a newCanadian Duetz engine.

Acre clearing job, ready to work! wonderfully fantastic memory fora brand a young boyLever that's control, 33” bar, pump and tranny Remote Big production lasted acontrol. lifetime.

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

MID-ATLANTIC

LOGGING & BIOMASS EXPO

AD13916 SUBMISSIONS Item ID: May be sent to­ Contact: Austin morris@lumbermens.co Ph: (888) 401-6367 x703 POSTMASTER

John Deere 548G2

Send address changes to: Item ID: 14042 Lumberman's Exchange Skidder - Very good running P.O. Box 1916 Contact: Austin condition.

Big Capacity Grapple!

Columbia, TN 38402 Ph: (888) 401-6367 x703

9400 hours. Tires at 40%. Totally

bells and whistles, its a production

‘97 Prentice 210E machine, with air strain conveyers

Item# 13795 that go up and down, with airbags, Contact: Sam Ph: (888) 401-6367 x702

it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This

Logosol Planer - This is a 10” Every Reputableis2006 Wide Band an extremely accurate machine 4 sided planer that has removable Supplier Offers in ve1y goodthat condition, 130 side cutters will takeCuts up to KENTUCKY WOOD EXPO

feet lumber aSteel minute also has CLT presses.

Fri, 15 Sept3- High Sat, 16Quality Sept Swedish 12” and includes a blower ID Item 13876.IDAustin Lexington, Kentucky 3 3” – 8” Band Width Item system.

13428.x703 Sam x702 http://www.kfia.org/ S & W 125 Band Mill with POLE & POST PEELERS 3 16 to 20 Gage KentuckyWoodExpo.aspx

Caterpillar generator - Low hours

3 Double Cut OptionsPS8 Post Peeler - This peeler has ‘99 Hydro-Ax on the mill, electronic computer Set THE PAUL BUNYAN SHOW converted to electricity over 3 Choice of Swage orbeen Stellite 511EX works,1 1/2" or 2" band, 22ft. track Fri, 6 Oct - Sun, 8 Oct hydraulic. Comes with a operators

‘06 Brewco B1600 DESIGN DIRECTOR Donna Heninger Resaw

P.O. Box 1916 ‘10Columbia, Shop Built TN 38402-1916 (888) 401-6367 Wood Processor

with 44 inch wheels, and all the

Ph: (888) 401-6367 x703 Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

MAILING ADDRESS

feed deck 20 foot out feed deck

Item LOGGING ID: 13911 & BIOMASS MID-ATLANTIC Contact: Austin Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

has been rebuilt, it has a 24foot in

Escanaba, Michigan ‘05 Tigercat 230B

PUBLISHER

EQUIPMENT REPS Item ID: 13862 Sam Wall Contact: Samext. 702 (888) 401-6367 sam@lumbermens.co Ph: (888) 401-6367 x702

10 hours on this machine since it

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

WOLVERINE

‘05 Woodmizer LT300

Cambridge, Ohio Item ID: 13799 BUT ONLY THE www.ohioforest.org Contact: Sam Ph: (888) x702 BY 401-6367 MENOMINEE

** INFO LINK**

Item ID: 14031 Contact: Austin B& B611 Mfg . ...............................

Ph: (888) 401-6367 x703 18 ‘98 Ex-Hydro

B. H. Payne .............................. 16 Ax

Baker ID: ......................................

5, 7 Item 13948 Contact: Austin..................... 27 Bell's Machining Ph: (888) 401-6367 x703 Brute Force Mfg. ..................... 31

Buck Equipment (AIM) ........ 36

IDCorley 13438.Mfg Sam.............................. x702 32 2007 TimberPro 810 Combi CRD Metalworks .................... 25

‘14 B66TD Rotochopper

Machine - Forwarder set up but

The Lumberman's Exchange is CW Mill-ArmorHog .............. 17 gone

by TP Dealer comes with rebuilt Log Max 750 published by Woods -through 3410 monthly hours. $32,000 in who recent CW Mill-Hogzilla ................... 15 Publishing, P.O. Box 1916, Item ID: 13838 did the following: Repacked and processing head.

Less than 5200 upgrades repairs.

Fecon Columbia, TN and 38402.

All rights Dyna Products ........................

Contact: Sam reserved.

All editorial/ advertorial resealed hydraulic cylinders – ID total hours. Runs very well. Has 35 BH250 Mulching Head.

Item (888) 401-6367 Ext. 603 8 submissions are used at the Empire grapple arch, steering; Replaced blade andHydraulics plumbed for................... a clam 13502.

Sam discretion of the x702 publisher and may be edited for purposes of- clarity hydraulic hoses and lines where bunk.

New swing box. Quick Great Lakes Mfggear . ....................

34 2011 Tigercat 620D This is a and space. Although all efforts have needed – hour filltopump, grapple, etc; inMachinery 15 13408. min. toSam switch skidder with only Item ID x702head to3 Hahn ...................... beenlow made ensure accuracy of 5500 attach content submitted by advertisers Repacked fill pump; Cummins 6.7 Grapple QSB engine. hourshydraulic on a cummins engine and grapple.

2014 Boiler Tigercat 630D Hurst .............................

14 and writers, the Lumberman's Replaced exhaust; Replaced center 260HP. Optional Tracks on all Just a fire suppression Comes Skidder - Dual Arch Grapple.

Exchange, its principlessystem. and Iron Bull ................................... 21 associates, are not held liable pins; Straightened andtires painted $10,000.

Item ID 13501. mounted on 35.5 atfor 50% back bogies 1990adds hours.

3 year/5000 hour PT errors or omissions. Reproduction, Kilgore Saw ............................. 22 panels; allprohibited fluids and x702 andChanged 40% front and good chains 35.5 tires with dualing in whole or part, is with­ on Samwarranty.

Lignomat ................................. out written consent. cab; Checked filters; TimberPro II 24 allRe-insulated 4 tires. Has the bigger 630 axles 2010rings at 60%. 725B Widew/Rolly blade. Winch. ©2017 Woods Publishing

and fixed wiring asCenter needed.

Item Machine. and no winch. pins are tightProcessor Item ID- Super 13526. Clean Sam x702

Cat 3406 140KW Genset, 12,400 cab, electric boxes, conveyor and hours ready to run. Item ID 13434. kickers and will peel a 3” post to a Sam x702 7” post. Comes with a barko loader

SAW GUARANTEES

CARRIAGES & DRIVES mounted on a truck that has also • Cutting Edge Plasma Welds 2010 Cardinal HD Carriage been converted to electric power.

Runs great. Has worked double • The Industry’s HighestCarriages Band Saw Capacity (Sawmill) - Cardinal Item ID 13926. Sam x702 shifts so it has higher hours Carriage line Inventory it includes carriage • Quick our HUGE PORTABLE SAWMILL at 13,500, but............................. has Delivery been well from M&F Gauge 28 with onboard log turners, carriage 36” Portable Sawmill - Maximum maintained.

New U/C last year.

• Fast Sharpening Program Meadows Mill, Inc . ................

33& Exchange drive, hyd pac for carriage, diameter log36” Maximum length 24” grousers.

All pumps rebuilt last to Keep YOU Running Menominee Saw ..................... 29 sawyers cab, computer controls, of cut-20’6” Powered by a Koehler year. Gull wing engine cover with ‘14 Hurdle 3-Hd • Competitive Pricing cabinet with electronic drives for Metal Detector's Inc. ..............

30 hydraulic lift for easy maintenance. Diesel 9.8HP Blade-1-1/4” by 13’2” carriage knees, husk including Midwest .............. long 12 Volt saw-head precision Rolly IIAnd inSharpening good condition and 26 ONLY Menominee Gives You Everything 48" bottom saw and 36" top saw Item ID: 13997 Mor bark .....................................

Item–IDPlus 13897. Austin computer measures well. Owner You need in a 9Wideup/down.

Band Saw

Block Sawmill Contact: Austin

2006 CAT 517

x703 retiring. Bought new for $540,000!.

Multitek ...................................

12 Expert Service from the Most Ph:Industry’s (888) 401-6367 x703 Item ID: 13869 36” Portable Sawmill - Maximum Item ID 13362.

Sam x702 Knowledgeable Staff.

Piper's Saw Shop....................

13

STACKING RAC

Contact: Sam diameter log-36” Maximum length 2006 TimberPro 830 COMBI Rotochopper ............................

40 Ph: (888) 401-6367 x702 Got a Wide Band Problem? of cut-20’6” Powered by Koehler Harvester/Forwarder - Just 5700 Row Electric ............................ 20 SawgasToday and1-1/4” You’ll 19HP Blade by 13’2” hours. VeryCall goodMenominee condition. Comes Sawmill Exchange ..................

11 Why More Mills the Pro!precision long Trust 12 Volt saw-head with grappleLearn for loading forwarder Select Sawmill .........................

19 and Log Max 7000 processing head

for harvesting.

2 sets of tracks for Smith Sawmill ...........................

4

up/down 12 Volt Electrical

TOLL FREE 1-800-582-0470

Forward/Reverse Saw Head

Travel. Item ID 13899. Austin x703 bogies.

Set up for quick The Paul Bunyan Showchange ......... 39 Dixon Sawmill - VERY UNIQUE from harvester to grapple. One Thomas Industrial Controls..... 10 AND EFFECTIVE MILL! Dixon man operation.900 Log Max head has 16th St., Menominee, MI 49858 Union Grove Saw & Knife.. 2, 37 Firewood Proc. in bottom blade and 38 in top top saw and runs Compare to 52 Tel:well.

906-863-2609 Fax: 906-863-1147 Item ID: 13865 Universal Refiner ................... 23 blade. It has a four blade vertical new machine at Email: $650,000.info@menomineesaw.com Item ID Contact: Sam www.BakerProducts.net WoodMizer ................................ l edger diesel powered with a fuel 13439. Sam x702 Ph: (888) 401-6367 x702 800.S48.6914 I S73.663.7711 PLANERS efficient duezt 247hp motor. Item

WWW.MENOMINEESAW.COM

‘14 Komatsu WA200

- USED FORESTRY EQUIPMENT FOR SALE  SELL EQUIPMENT TODAY ❘ the grapple 24/7 SUPPORT SALE l§ TODAY 0 SUPPORT and extra fuel tank.

Item ID 13929.

2015 ❘ Tigercat 234BYOUR Loader - Model roatation on w/ a Loader  Issue 364 Lumbermens  since 1986 ❘  List  seLL  exchange  buy  save ❘ Sam x702 234B. Only 300 hours on this 30’ reach on the boom. Joystick

One Owner, low hours!

❘ 2006  (888) 401-MENS L! 401-MENS Tigercat 630C GrappleNO. 15  Lumbermensmagazine.com boom loader, 3 knife disc, Newer Skidder - Very good running discharge chute, New banding

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

John Deere 748G3 Grapple Skidder Item ID: 95874

2004 John Deere 748G3 Grapple Skidder approx 10000 frame hours, 200 on rebuilt motor, good transmission, strong machine, 30.5 tires, direct drive, strong winch, everything works good, only thing it could use is 1 pin/bushing on arch main boom. Call for more pictures!

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

B U Y S

International 4300 Bucket Truck

‘13 KMC 2500 Track Rayco T185 Hydra Stumper Skidder Item ID: 99096

Item ID: 29129

2005 international 4300 dd466 less than 73000 miles, all new hoses, new bearings, $10k recently into the13428 engine receipts to prove altechBox reVictory Ln.all work, // PO built the boom(23k Job) Call for more pictures!

Item ID: 14078 1998 Rayco T185 Hydra Stumper 185 hp JD engine w/less than 50 hrs on total rebuildContact: New cutter headAustin pump, alternator & gauges. Rebuilt track drives & main gearbox. Runs & works good. Call for more picPh: (888) 401-6367 x703 tures!

124 Adams Center, NY 13606 Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Morbark Chipper

H O T

Sam Item x702 ID: 26696

‘05 Gehl CTL 70 John Deere 540D ‘83 John Cable Deere Skidder

4850

Contact: Austin

Contact: MARK Ph: (888) 401-6367 x703 Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703 with 1700 hours, in very good condition. Easily produces high

L O G G I N G

Firewood Processor This is 6 knife - 58" chipper with 3 pocket blanks in- it.

2nd owner....

1st owner could not make payments so Morbark bought it back. a Chomper Model 16 PDA Was like new 5 years ago when 2nd owner purchased it. automatice firewood processor

Contact: TED

Email: Teds@lumbermensco.com Item ID: JW-986495 with JohnEXT Deere power unit with Phone: 888-401-6367 701 or (801) 319-9351 Contact: J Williams low hours. Control panel includes Ph: (888) 401-6367 x701

tach, oil pressure, water temp and Aluminum Water Tank

Item ID: 18440

1989 John deer 540D Cable Skidder, good strong winch, 23.1ID: tires, 14073 motor rebuilt about 4 years ago, Item blade good, centers good. Call for video!

quality chips with patented ‘Cone’

ID:Cuts 59292 amp Item gauges. logs up to 16”.

valves owner and air and actuator/pump.

Hight :all 6.5 feet chain conveyer, 8 way splitter,with onbaffles, One comes with - Width at widest point: 7.5 feet - Length: 16 feet . This was a working when tank wasreceipts. removed from truck. Crane 20,000lb goose neck trailer. Item ID unit manuals and Purchased available to load on your trailer no additional cost.

13916. Austin x703

Best Value Portable Log

new for $32,500. Item ID 13865.

Contact: TED Email: Teds@lumbermensco.com Splitter Sam x702 Phone: 888-401-6367 EXT 701 or (801) 319-9351

- Small manufacturer in PA has

made the best valued log splitter.

2009 John Deere 700J Dozer

LOGGING EQUIPMENT BANDIT

Handles logs to 32”. Uses Item ID:up 54715 drum design. Can easily load 42’ 13HP motor.completely Manual John Deere 700J dozer Honda with winch, machine gonestart through

1999 Bandit 1900 Tracked Disc

day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge Contact: MARK

Diesel.

Hours. One owner.

210D 7500 Knuckleboom Loader

vans and produce 6 - 8 loads

EDGERS & GANGS

in spring. Enclosed with heat and air, excellent machine approx 3500 per but electronic option available. hours. Excellent working machine! Call for moreis pictures!

Email: Mark@lumbermensco.com adjustable to or single two way.

Phone: 888-401-6367 EXT 708 702-875-2703

Great

Brewco Saws - Two Brewco Saws

Value! PA. Item ID 12062. Sam x702

Item ID 13644. Sam x702

Item ID: 98053 with a 10’ homemade processor

in excellent condition. Runs great.

Firewood Processor Timbco 425D- This is a

FIREWOOD PROCESSORS Has a hydraulic grapple, 1995 model log with deck. good Undercarriage and 22” quadco hot saw. Around 10,000 hours.

2010 Shop Built Wood Processor

chain and kicker that all runs off

- It has a 353 Detroit diesel, 40Contact: AUSTIN of a 4 cylinder Mercedes power Email: Austin@lumbermensco.com

OR 931-797-8029 inch insert tooth circle saw, 30Phone: foot 888-401-6367 unit. Has EXT a 4’703 chain saw that kicks

 Issue 364 381

‘95 John Deere C6 Tree Farmer

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Well maintained.

Item ID 13294. on Truck Sam x702 Item ID: 6694

replaced motor last year, 12,817 frame4680 hours, -leak on 2004 Bandit Beast Model valve bank o ring, everything works as should, needs AC recharge, slasher grind saw 60"circle saw, truck runs 3412 Caterpillar Diesel engine good, clutch is a little loose, Is plumbed for groundsaw, new blower, 4x6 square tubing secures loader to frame, with 850 HP. 5300and hrs.

Mill in trailer frames great loader truck!

good condition. Just finished 10 Contact: MARK Acre clearing job, ready to work!

Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 Remote control. Big production

702-875-2703

 List  seLL  exchange  buy  save

Item ID: 13920 2009 Mack Truck & Trailers Contact: Austin Item ID: 74618 Ph: (888) 401-6367 x703

18 speed. All new tires and brakes. Versitle with either a Rosa log rack or storm debris box. Serco 7500 Loader. Rear tires 11R 22.5 (95%). Log rack; light bar; length bed to takes 244" and to back 285" Will separate truck and trailer. 300,000 miles, 10,000 capacity!.

ItemtoID hours. This is ready go. 13421. Sam x702

BARKO

Contact: TED Email: Teds@lumbermensco.com

1994 Barko 160B - EXT Electric Phone: 888-401-6367 701

or (801) 319-9351

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. good working 22in 2016inBarko Tree order.

Chipper kohing head. head Item ID: works 16688great.

Item ID 13185.

Sam x702 150 hours.

550 Cimmins engine.

Can handle

trees up to 22 inches in diameter.

1999 Barko 160D - new engine with

Contact: TED 1500 hours. Hour approximately Email: Teds@lumbermensco.com

Phone: 888-401-6367 meter dont work. TheEXT last701 2 owners

or (801) 319-9351

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

2004 CATcontinuous 517 Grapple Dozer CUMMINS grapple.

Item ID: 70690 Runs Great!. Item ID 13740. Sam

cat 517 swing boom grapple, enclosed cab, heat/air

air needs a recharge, 8’ 6 way blade, 24” pads, good x702 rollers, good sprockets, needs pads and turner pins, 4554 hours, majority of the last 2000 hours have been grading behind an excavator, very little logging. Call for pictures and video!

BELL

1990 Bell Super T - This Bell has MARK aContact: brandMark@lumbermensco.com new Duetz engine. Lever Email: Phone: 888-401-6367 EXTtranny 708 control, 33” bar, pump and

702-875-2703 ❘

 LumbermensCO.com

** CALENDAR**

Tigercat 615C Item ID: 17058

2013 model with only 600 hours in like new condition, with size 30,5 tires.

NY STATE

2010 Vermeer Horizontal FOR HG6000 CLASSIFIEDS Grinder Item ID: 96128 Call 888.401.MENS

pictures, prices, and WOODSMEN'S FIELD DAYS screens- 6”, 4”, 2”See Extra parts Call for more pictures!

Fri, 18 August - Sun, 20 AugustContact: MARK Location of all equipment at 765 HP C18 engine with 5000 hours Half of new chain and apron 3

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Email: Mark@lumbermensco.com Boonville, New York www.LumberMB\ISmagazine.com Phone: 888-401-6367 EXT 708 or 702-875-2703 www.starwebhosting.net/woodsmen/

Item ID: 1865

BANDMILLS & HEADSAWS SOUTHWEST FOREST PRODUCTS EXPO2005 Cat 525B Grapple Skidder Danckaert Resaw - Roughly Fri, 25 August - Sat, 26 August ItemBand ID: 7571 Hot Springs, Arkansas www.arkloggers.com

215,000 pound Cat 235bz knuckle boom with 50 foot reach. Needs about $7K in repairs.

10 hours on this machine since it

9500 approx hours, hear air, radio, enclosed cab, all cylinders been repacked, transmission is in good shape, no issues, 30.5 tires approx has been rebuilt, it has a 24foot in 70%, good woods ready machine! Call for more pictures!

deck 20 foot out feed deck Contact: TED 72ND ANNUAL GREAT LAKES Contact:feed MARK Email: Teds@lumbermensco.com Email: Mark@lumbermensco.com with 44 inch wheels, and all the has LOGGING & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 701 or (801) 319-9351

Since 1986, Lumbermens published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 Hydro-Ax 470 Feller Buncher morris@lumbermens.co

Item ID: 9252

MARKETING DIRECTOR 2230 hours two tires 80% two 60% solid machine couple pins in head Williams could be changed one John minor hydraulic leak very little leak really tight (888) 401-6367 ext. 701 j@lumbermens.co

Contact: MARK DESIGN DIRECTOR Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 Donna Heninger

702-875-2703

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402 The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

bells and whistles, its a production

machine, with air strain conveyers Timberjack Item 114 that go up350 and down, withID: airbags,

MID-ATLANTIC LOGGING & BIOMASS it includes two of Mcdonough new paint, 2 new tires and sets 2 @ 70% [18.4 X 34], 1 set Fri, 15 Sept - Sat, 16 Sept 1986, of chains, Heated cab. Ready to go nothing needs to be

Woods Publishing

ADVERTISING SALES

Phone: 888-401-6367 EXT 708 or 702-875-2703

MID-ATLANTIC

LOGGING & BIOMASS EXPO

pressure guides. Top Casting wheel Selma, North Carolina fixed. Selling because he doesn’t need it anymore. www.midatlantic-logging-biomass­ is supported on both sides. This Contact: TED expo.com/ Email: Teds@lumbermensco.com is an extremely accurate machine Phone: 888-401-6367 EXT 701 or (801) 319-9351

KENTUCKY WOOD EXPO 1991 Timberjack 450B Fri, 15 Sept - Sat, 16 Sept Item ID: 1826

New pins & bushings. Tight skidder all around. Ready to drag some wood.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org

in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

2008 John 748Hx703 Grapple Item IDDeere 13876. Austin Item ID: 72099 Skidder S & W 125 Band Mill with

748H 9500 hours 15 hours on new crate motor, 30.5 tires 70% tight center, dry, everything is tight and solid, dual arch, direct drive, sweda axles, 110” generator - Low hours grapple, good Caterpillar winch. Great machine!

Call for more pictures!

on the mill, electronic computer Set Contact: MARK Email: Mark@lumbermensco.com works,1 1/2" or702-875-2703 2" band, 22ft. track Phone: 888-401-6367 EXT 708 or Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

** INFO LINK**

Sam x702

CARRIAGES & DRIVES

Innovative 2010 Cardinal HD Carriage

Clean-Burn Design Carriages (Sawmill) - Cardinal

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Saw ..................... 29 Baker ......................................

5, 7 Menominee Manufacturing a full line of biomass fired combustion systems backed with fi fty years of Bell's Machining ..................... 27 Metal Detector's Inc. .............. 30 innovative clean-burn design. Diverse in every Brute Force Mfg. .....................

31 Midwest Sharpening.............. 26 way with multi-fuel blending capability.

Hurst stokers utilize hundreds of common and Buck Equipment (AIM) ........ 36 Morbark ..................................... 9 abundant solid biomass fuels.

Large or small scale, Corley Mfg ..............................

32 project Multitek ................................... 12 management is eased with the CRD Metalworks ....................

25 Piper's impressively short installation time Saw Shop.................... 13 required with prefabricated CW Mill-ArmorHog ..............

17 Rotochopper............................ 40 modular components.

CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3 Rotary Dryers Sand Dryers Hurst Boiler ............................. 14 Grain Dryers Lumber Kilns Iron Bull ................................... 21 Cement Kilns Kilgore Saw ............................. 22 Brick Kilns Lignomat ................................. 24

The Paul Bunyan Show ......... 39

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Thomas Industrial Controls..... 10 Union Grove Saw & Knife.. 2, 37 Universal Refiner ................... 23 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including 48" bottom saw and 36" top saw

STACKING RAC 50

YEARS www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 17

L O G G I N G

The Tree that Started it All!

CAT 235 BZ

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Timberjack 230 D Forwarder

2012 Tigercat 610C

Item ID: 98897 ‘16 Halverson H140 1977 model. 353 Detroit, 5 speed trans with a Skidsteer (DEMO) low low. New brake drums and brakes. Motor

Item ID: 98059

7870 hours, 1 hour on out of frame reman on the entire engine, hydrostats in great condition, dry machine, tight centers, tight blade, tight grapple. Excellent woods ready machine. Call for more pictures!

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

‘11 Tigercat 845C Item ID: 13927

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

good, pins loseJW-909632 on the loader, 2 extra tires 50% Item ID: or better. Tires on it 40%. Ready to use now.

Contact: J Williams Contact: TED Ph: (888) 401-6367 x701

Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701

or (801) 319-9351

‘93 Barko 180B JD 440C

ID: 4032 Item ID:Item 14077 (‘90 model) Winch re-done 1mo. ago, tires bought new Contact: Austin last March, size 18.4, JD engine 4cyl, 8.7K frame hrs, but there is(888) more than401-6367 that. Only 2 owners its entire life.

Ph: x703 Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709

801-362-2170

L O G G I N G

TimberPro 725B

JD 648G II

Item ID: 20976

Item ID: 34800

(‘12) (2.8K hrs) One owner. Cummins 8.3L, U/C at 40%. Everything in working order with a Quadco 2900 intermittent disc saw head. Cream puff!

Motor rebuilt 1K hrs ago, tranny redone 700hrs ago.

Needs new tires, but everything is in good conditions, tires are 30.5 size. Center section, pins & bushings good!

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

Email: Joe@lumbermensco.com Item ID: Phone: 888-401-6367 EXT13920 709 OR 801-362-2170

Contact: Austin ‘13 KMC 2500 Track Ph: (888) 401-6367 x703 Skidder TIMBERJACK 460D / 648G III

Timberjack 240D

Item ID: 40272 13428 Victory Ln. // PO Box 124 Skidder has a grapple and a winch, Adams Center, NY Cummins 13606 motor. In excellent condition.

‘95 John Deere C6 Contact: JOETree Farmer

with 6 cylinder

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

Item ID: 34900

(‘05) pins and bushings all good, no leaks, motor rebuilt approx. 2.5K hrs ago, T/C (no direct drive). Item Two new back tires, front tires 35%. capacity!.

ID 13421.

Sam x702JD 748G model bigger grapple on it. 13K frame hrs, new injection pump 8mo. ago, new ECU. A/C - heat good!

off onto a conveyor. This is a very

knuckleboom, 30' boom, 75hp

John Deere 700H Sam x702

grapple, 5,000 original hours.

well built processor. Item ID 13820.

Item ID: 1324 Firewood Processor - This is

‘05 Gehl CTL 70 John Deere 640G3 Cable Skidder Item ID: 51567

‘83 John Deere 4850

approx 2500 hours on rebuilt engine and reconditioned transmission, winch recently redone, all new o rings, clutch packs good, 6000 series winch big winch with oversized cable on it, 120 rate chokers, 23.1 tires 20-30%, comes with ice pick chains single diamond, 2 at 70% 2 at 80% or better, new hydraulic pump, all rebuilt axels, new differential pump, blade and steering cylinder recently repacked, great on cold start, no blow by strong motor strong transmission Call for more pictures!

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

condition. Easily produces high

13000 frame hours with a New undercarriage. No blow by, Chomper Model 16 PDA and doesn’t ause any oil

automatice firewood processor

Contact: AUSTIN

Email: Austin@lumbermensco.com Item ID: JW-986495 with John Deere power unit with Phone: 888-401-6367 EXT 703 OR 931-797-8029 Contact: J Williams low hours. Control panel includes Ph: (888) 401-6367 x701

rebuilt injector pump, John Deere winch good winch strong winch, new hy-

20,000lb goose neck trailer. Item IDpump, Dry manuals and Purchased draulic machine don’t burn receipts. no oil, tight machine.

Complete ser13916. Austin x703

vice every 2 months greased every other day. Call for more pictures and video! new for $32,500. Item ID 13865.

Contact: MARK Splitter Sam x702 Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

- Small manufacturer in PA has

made the best Wheeled valued log Feller splitter.

Hydro-Ax 611EX

built, approx 8000 hours, dry machine no leaks, heart/ air works, all per but electronic option is available. new glass, tight excellent machine! Call for more pictures!

Has Log Lift. Uses 4-way wedge

Brewco Saws - Two Brewco Saws

Value! PA. Item ID 12062. Sam x702

Contact: MARK Email: Mark@lumbermensco.com adjustable to single two way. Great Phone: 888-401-6367 EXT 708 or 702-875-2703

in excellent condition. Runs great.

Firewood Processor - This is a Komatsu Processor & Forwarder Item ID: 8298 Item ID 13644. Sam x702 homemade processor with a 10’

Like new, approx. hours Has on harvester, approx. 500 grapple, hours on forFIREWOOD PROCESSORS log750 deck. a hydraulic warder both in like new condition, tracks included! Selling only be-

cause workerschain only want to show up 2-3 days week.

Goingoff back to Processor and kicker thatperall runs cutter, skidder, loader setup Call for more pictures!

- It has a 353 Detroit diesel, 40

of a 4 cylinder Mercedes power

Contact: MARK

inch insert tooth circle saw, 30 Email: foot Mark@lumbermensco.com unit. Has a 4’ chain saw that kicks Phone: 888-401-6367 EXT 708 or 702-875-2703

 Issue 364 381

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

sure on Good Sam thing isx702 these will run forever Item IDhours.

13185.

day. Item ID 13882. Austin x703

2010 Shop Built Wood

13238. Chris x700

chain conveyer, 8 way splitter,28L’s, on approx 1400 One owner withnew allcenters, hours on rebuiltand engine comes and transmission,

amp Item gauges. logs up to 16”.

ID:Cuts 41839

drum design. Can easily load 42’ 13HP Honda motor. Manual start 1999 611EX quick steer, 28L’s 60-70% all pumps gone through and re-

EDGERS & GANGS

(excellent condition.). Item ID

tach, oil pressure, water temp and

Timberjack 450C Grapple Skidder

quality chips with patented ‘Cone’ Handles logs up Item to 32”.ID: Uses Buncher 40418 vans and produce 6 - 8 loads

motor, Rotobec continuous

onTimberjack injection pump. always started 1210 Forwarder Item ID: 97522 good. in good working order. 22in

Best Value Portable Log

with 1700 hours, in very good

BARKO

Contact: JOE 1994 Barko 160B - Electric Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

Lumbermens™  since 1986

❘

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

John Deere 640D Sam x702 Item ID:63000 2004 Bandit Beast Model 4680 -

3412 Caterpillar engine cable Skidder.Diesel Rebuilt engine and 850 newHP. hydraulic with 5300 hrs.pump Mill input in.

Woods ready. good condition. Just finished 10 Contact: WALKER Acre clearing job, ready to work!

Email: Walker@lumbermensco.com Remote Big production Phone:control.

888-401-6367 EXT 707

 List  seLL  exchange  buy  save

woods ready, tight head dry machine, no blow by, transkohing head. works great. mission is tight and smooth, AC heat work good, un-

when taken care of right. Which this one has been.

Call forBarko more pictures!

1999 160D - new engine with

approximately 1500 hours. Hour Contact: MARK Email: Mark@lumbermensco.com meter dont work. The last 2 owners Phone: 888-401-6367 EXT 708

have only702-875-2703 used it to load trucks or as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Cat 515 Converted Cable Skidder Item ID: 2042 Runs Great!. Item ID 13740. Sam

custom built log arch styled after John Deere arch made with

heavy duty steel, brass fittings, grease-able rollers($7k arch). x702 Approx 4000 true Cat documented hours, 28L tires, 2 like

BELL

new, 2 50%, coolant and oil tested by Cat and documented on July 24th 2018, enclosed cab, working heat/air, everything is in great working condition. Call for more pictures!

1990 Bell Super T - This Bell has MARK aContact: brand new Duetz engine. Lever Email: Mark@lumbermensco.com Phone:33” 888-401-6367 EXTtranny 708 control, bar, pump and

702-875-2703 ❘

 LumbermensCO.com

** CALENDAR**

Cat 318CL FOR CLASSIFIEDS Item ID: 97884 Call 888.401.MENS (‘08) (6.7K hrs) 8.3L Cummins engine w/Rolly 2 processor head. U/C 05’ model with 6000 hours, enclosed cab with heat & air.

50%, enclosed cab, leveling cab, A/C - heat works. It can also be Everything works like itpictures, should.

See prices, and NY STATE WOODSMEN'S FIELD DAYS purchased without the ROlly 2 head Fri, 18 August - Sun, 20 AugustContact: AUSTIN Location of all equipment at Contact: JOE Email: Austin@lumbermensco.com Email: Joe@lumbermensco.com Boonville, New York www.LumberMB\ISmagazine.com Phone: 888-401-6367 EXT 703 OR 931-797-8029 Phone: 888-401-6367 EXT 709 OR 801-362-2170 TimberPro 735B Item ID: 52609

www.starwebhosting.net/woodsmen/

Fri, 25 August - Sat, 26 August

Item ID: 92115

Hot Springs, Arkansas www.arkloggers.com

2011 model with 7200 hours, has good rubber and is a one owner well maintained skidder.

BANDMILLS & HEADSAWS

Timbco 820D Danckaert Band Resaw - Roughly Item ID: 18370 10 hours on this machine since it

06’ model Clam bunk forwarder with Cummins engine.

has been rebuilt, it has a 24foot in

Contact: AUSTIN feed deck 20 foot out feed deck Contact: AUSTIN 72ND ANNUAL GREAT LAKES Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029 with 44 inch wheels, and all the has LOGGING & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 703 OR 931-797-8029

Since 1986, Lumbermens published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

Thurs, 7 Sept - Sat, 9 Sept

Timbco 425B

machine, with air strain conveyers

Item ID: 74779

MID-ATLANTIC LOGGING & BIOMASS (‘93) new drive track pumps 1K hrs ago, motor was reman 3K hrs ago. 33” Timbco barsaw head. U/C 60%. only 10K frame hrs. Three Fri, 15 Sept - Sat, 16 Sept owners. One of cylinders on boom needs repacking. A/C - heat ok, windshield just replaced, 5.9L Cummins, leveling cab.

JOE MID-ATLANTIC ADVERTISING SALESContact: LOGGING & BIOMASS EXPO Email: Joe@lumbermensco.com

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

Phone: 888-401-6367 EXT 709 OR 801-362-2170 Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

BARKO 495ML

MARKETING DIRECTOR

Timbco EXL KENTUCKY WOOD445 EXPO Fri, 15 Sept Item - Sat,ID:1687930 Sept

Lexington, (‘09) (9.5K hrs) U/CKentucky at 80%. Head is the 40 degrees 33”

Item ID: 33905

Timbco barsaw head. Cummins 8.3L engine.

John Williams http://www.kfia.org/ nothing! (‘16) (4.2K hrs) Cummins engine, one gear box replaced at 3.5K hrs (888) 401-6367 ext. 701 and a recall on oil cooler. A/C - heat works, Big John hydraulic trailer, KentuckyWoodExpo.aspx j@lumbermens.co fully plated. Excellent conditions, turn-on ready!

Contact: JOE

DESIGN DIRECTOR Contact: JOE Donna Heninger

bells and whistles, its a production

Escanaba, Michigan

Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Needs

Email: Joe@lumbermensco.com THE PAUL BUNYAN SHOW Phone: 888-401-6367 EXT 709 Fri, 6 Oct 801-362-2170 - Sun, 8 Oct

Cambridge, Ohio www.ohioforest.org

** INFO LINK**

that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine

Tigercat 230Cuts 130 in ve1y good condition, Item ID: 71822 feet a minute also has CLT presses. (‘99) over-hauled.

Gear box and turntable are heat good, decent tires.

5.9L Cummins, joystick controls, SCTR &W 125 Band Mill with delimber.

No bucksaw.

Owner upgraded.

Item IDleaks, 13876.

Austin NEW, no no oil burning. x703 A/C -

Caterpillar generator - Low hours Contact: JOE on the mill, electronic computer Set Email: Joe@lumbermensco.com Phone:1/2" 888-401-6367 works,1 or 2" band,EXT 22ft.709 track

801-362-2170 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 19

L O G G I N G

The Tree that Started it All!

John Deere 540G3 SOUTHWEST FOREST PRODUCTS EXPO

Quadco 22B Hot Saw Head

“Precision Under Pressure”

CAT 518

Phone 315.284.4126 Item ID: 7750 Fax 315.849.2045 2012 model with very low hours, has only been used toWebsite cut softwood. www.empirehyd.com Email Contact: AUSTIN info@empirehyd.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Item ID: 97335

(11.7K hrs) (‘85 model) One original owner. It’s got a 4 cyl CAT engine, motor rebuilt 5yrs ago (1K hrs ago). Tires are at about 20% tread left, they skid fine. Winch works great, engine starts right on, no blow-by issues. Needs nothing, good reliable machine.

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

‘93 Barko 180B

‘16 Halverson H140 Timberjack 380C Grapple Item ID: 14077 Item ID: 69901 Austin Skidsteer (DEMO)5.9 Cummins, 12Contact: valve, 4 speed Clark transmission 4 forward 4 reverse, ex-

VALMET 840.2 FORWARDER Item ID: 9770

2005 model with 18000 frame hours, has new trunnion, & new rear bogie brakes installed last spring. Comes with 1 set of bear paws,1 set of ice chains, & 1 set of tracks.

Ph: (888) 401-6367 x703

Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

ternal tranny cooler, 28L’s, tranny less than 1000 hours, motor redone no blow by, centers redone recent, no leaks, dry very minor seep on valve body and grapple controls. Rear ends redone a year ago, full time 4 wheel drive, John Deere winch, good winch, strong winch! Call for more pictures!

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

Cat D5G with Winch Item ID: 107

2002 model with 7000 hours. Has log arch & winch! Everything in the undercarriage was just replaced besides the rails and one front idler.

‘95 John Deere C6 Contact: AUSTIN Tree Farmer Email: Austin@lumbermensco.com Item ID: Phone: 888-401-6367 EXT 13920 703 OR 931-797-8029

L O G G I N G

Timberking 458 Forwarder Item ID: 171

2005 model with 17,750 frame hours. Had new engine 13428 Ln. 1000 // hours PO Box and new super grip Victory grapple installed ago.

Working daily

Tigercat T240B Item ID: 4266

124 2006 model with 10,500 hours, has all new hoses, along Adams Center, NY 13606 with all repacked cylinders. In excellent condition.

Contact: AUSTIN Contact: AUSTIN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703

931-797-8029

931-797-8029

‘13 KMC 2500 Track Skidder

Contact: Austin Ph: (888) 401-6367 John Deere 648E x703

Item ID: 14078 1995 pin & Contact: Austin woods Ph: (888) 401-6367 x703

model in excellent condition, every bushing are new. Has not been in the capacity!.

Item worth ID 13421.

Sam done! x702 since having $20k of work

off onto a conveyor. This is a very

John Deere 640C

Sam x702 Item ID: 2539

Timberpro 735TL Item ID: 14279

‘83 John Deere 4850

2011 timber pro 735B 11800 hours, 20" quadco hotsaw, tracks/undercarriage 35% no leaks dry, no issues, everyday runner heat/air both work fire suppression system new goal drive new swing turner all hard stuff redone oil Item 14073 change everyID: 200 hours grease everyday

Contact: Austin

Contact: MARK Ph: (888) 401-6367 x703 Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703 with 1700 hours, in very good

Firewood Processor This very is well Hard to find 640C model, that’s-been maintained, tight center section, no leaks, a Chomper Model 16 PDA comes with a set of chains.

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

1999 John Deere 648G

Item ID 13644.

ItemSam ID: x702 8548

FIREWOOD PROCESSORS 11000 frame hours with new engine installed last year.

Has New turbo as well.

2010 Shop Built Wood Processor AUSTIN - Contact: It has a 353 Detroit diesel, 40 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT30703 inch insert tooth circle saw, foot

931-797-8029  Issue 364 381

automatice Contact: AUSTIN

firewood processor

Email: Austin@lumbermensco.com Item ID: JW-986495 with John Deere power unit with Phone: 888-401-6367 EXT 703 OR 931-797-8029 Contact: J Williams low hours. Control panel includes Ph: (888) 401-6367 x701

tach, oil pressure, water temp and

2000 Tigercat 845

amp Item gauges. logs up to 16”.

ID:Cuts 4497

chain conveyer, 8 way splitter,This oncutter has One owner comes all saw 4689 originaland frame hours, with with New 20,000lb goose neck trailer.

13916. Austin x703

Best Value Portable Log

pump installed 300 hours ago. Good Uncercarraige. Cab Item manuals and receipts. Purchased has ID AC but no Heat.

new for $32,500. Item ID 13865.

Contact: AUSTIN Email: Austin@lumbermensco.com Splitter Sam x702 Phone: 888-401-6367 EXT 703 OR 931-797-8029

- Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

LOGGING EQUIPMENT BANDIT540D 1988 John Deere

1999 Bandit 1900 Tracked Disc Item ID: 727

Rebuilt motor 1000 hours ago, Under tight center section, noatslip 13HP Honda motor. Manual start Chipper - Cat Carriage

but electronic option is

transmission, good winch. Tires are 23.1 x 26 with chains available. all around. 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Has Log Lift. Uses 4-way wedge Contact: AUSTIN adjustable to single two way.

Email: Austin@lumbermensco.com Great Well maintained. Item ID 13294.

Phone: 888-401-6367 EXT 703 OR 931-797-8029

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Sam x702

2004 Bandit Beast Model 4680 -

2008 Barko 495 ML

3412 Caterpillar Diesel engine Item ID: 7648 with 850 HP. 5300 hrs. in log deck. Has a hydraulic grapple, 11000 frame hours, and comes with csi Mill 264 Delimber. homemade processor with a 10’ chain and kicker that all

it is a tight and dry machine. runs Owner off statesgood condition.

Just finished

10

Contact: AUSTIN Acre clearing job, ready to work! of a 4 cylinder Mercedes power Email: Austin@lumbermensco.com

Remote control.

Big931-797-8029 production unit. Has a 4’ chain saw that kicks Phone: 888-401-6367 EXT 703 OR

Lumbermens™  since 1986

❘

BARKO

Contact: AUSTIN Email: Austin@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 703 OR 931-797-8029

well built processor. Item ID 13820.

‘05 Gehl CTL 70

Item ID: 6603

 List  seLL  exchange  buy  save

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

Volvo L50D

good. in good order. 22in Itemworking ID: 14263

kohing head. head works great.

2008 Volvo L50D and 5000 hours, bucket and forks, brand new quick connect, new starter, new battery, Item Sam x702cab heat/air, clean new acID that 13185. needs charged, enclosed

glass 50% tires, works real nice. Call for more pictures 1999 Barko 160D - new engine with Contact: MARK approximately 1500 hours. Hour Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 meter dont work. The last 2 owners

702-875-2703 have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

CAT 910C

Runs Great!.

Item 13740. Sam Item ID:ID 14264

x702 910 Cat 1978 transmission rebuilt, new clutch 1k hours

ago, dry, runs good, windows clean, forks, good woods machine, rife and kane tires off a combine tread is 5-6 inches deep, new battery. Call for more pictures

BELL

1990 Bell Super T - This Bell has MARK aContact: brandMark@lumbermensco.com new Duetz engine. Lever Email: Phone: 888-401-6367 EXTtranny 708 control, 33” bar, pump and

702-875-2703 ❘

 LumbermensCO.com

** CALENDAR**

2001 John Deere 435 Item ID: 7100

Loader is very tight and dry. It also comes with CTR bucksaw.

NY STATE

Fri, Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

WOODSMEN'S FIELD DAYS 18 August - Sun, 20 August

Boonville, New York www.starwebhosting.net/woodsmen/

Item ID: 8139

SOUTHWEST FOREST PRODUCTS Prentice 180 EXPO Fri, 25 August -Item Sat,ID: 267822 August

Hot Springs, Arkansas 94’ model with joystick control and bucksaw hookups. www.arkloggers.com 10000 total hours.

1999 model with 8200 Hours, UC is about 80%, has 36” pads. All filters were just changed, and cylinders repacked.

AUSTIN Contact: AUSTIN 72ND Contact: ANNUAL GREAT LAKES Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com has Phone: 888-401-6367 EXTEXPO 703 LOGGING & HEAVY EQUIPMENT Phone: 888-401-6367 EXT 703 OR 931-797-8029

Since 1986, Lumbermens published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

931-797-8029 Thurs, 7 Sept - Sat, 9 Sept

Escanaba, Michigan

John Deere 650J XLT

MID-ATLANTIC LOGGING & BIOMASS 2009 model with forestry package, has 6000 frame hours, with new John Deere installed engine 3 months ago. UC is Fri, 15 Sept - Sat, 16 Sept Contact: AUSTIN

MID-ATLANTIC ADVERTISING SALESEmail: Austin@lumbermensco.com LOGGING & BIOMASS EXPO

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

Morris Woods Phone: 888-401-6367 EXT 703 OR 931-797-8029 (888) 401-6367 ext. 704 morris@lumbermens.co

LUMBERMEN’S

MARKETING DIRECTOR

John Deere 200CLC Item ID: 706

John Williams Model with propac delimber, good (888) 401-6367 ext. 7012004 Equipment been well maintained. j@lumbermens.co Machine has Digest

DESIGN DIRECTOR Donna Heninger

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

EQUIPMENT REPS

Prentice 210E

Contact: JOE

pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine

www.lumbermenonline.com on the mill,AUSTIN electronic computer Set Contact: Email: Austin@lumbermensco.com works,1 1/2" or 2" band,EXT 22ft.703 track Phone: 888-401-6367

931-797-8029 Cat 3406 140KW Genset, 12,400

801-362-2170 Cambridge, Ohio www.ohioforest.org

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

Hydraulic Lines – Fuel Hoses – Air Lines Bell's Machining ..................... 27 Metal Detector's Inc. .............. 30 Electric Wire Bundles – Control Cables Brute Force Mfg. ..................... 31 Midwest Sharpening.............. 26

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

it includes two sets of Mcdonough

THE Email: PAUL Joe@lumbermensco.com BUNYAN SHOW Fri,Phone: 6 Oct 888-401-6367 - Sun, 8 OctEXT 709

May be sent to­ morris@lumbermens.co

POSTMASTER

that go up and down, with airbags,

feetJohn a minute also has CLT XLT presses.

Deere 650K

PROTECT ALL ** Them INFO LINK** ® With Pro-Tec-To Wrap

AD SUBMISSIONS

feed deck 20 foot out feed deck Contact: AUSTIN Email: Austin@lumbermensco.com with 44 inch wheels, andEXT all the Phone: 888-401-6367 703 bells and 931-797-8029 whistles, its a production

LUMBERMEN’S EquipmentItem DigestID: 480 Knuckleboom loader. Needs new batteries and Item ID 13876.

Austin x703 Lexington, Kentucky also needs the small gear on the Rotobec head.

PO Box 1146 It has saw and delimber hookups, but no saw nor http://www.kfia.org/ 2013 model with 4300 Hours, has with forestry package, and S& 125 Band Mill delimber. Ready to be shipped! Good machine, Columbia, TNW38402-1146 recently had new tracks, sprockets, idlers, and rollers UC. KentuckyWoodExpo.aspx gets the job done, works as it should!

1-800-477-7606 Fax (931) 388-3564 installed.

Caterpillar generator - Low hours

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

2011 Model with around 8000 Hours, well maintained

and ready to work. has been rebuilt, it has a 24foot in

in ve1y good condition, Cuts 130

KENTUCKY Item WOOD ID:EXPO 8256 Fri, 15 Sept - Sat, 16 Sept

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

MAILING ADDRESS

CATResaw 525C- Roughly Danckaert Band Item ID: 4091 10 hours on this machine since it

machine, with air strain conveyers

Item ID: 5109

around 75%

BANDMILLS & HEADSAWS

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Mfg&..............................

32® SLEEVE Multitek ................................... 12 PRO-TEC-TO®Corley WRAP PRO-TEC-TO Piper's Saw Shop.................... 13 CRD Metalworks ....................

25 COSTS! CUT YOUR DOWNTIME AND YOUR

The Lumberman's Exchange is Against Pinching, ............................ 40 CW Mill-ArmorHog ..............

17 Rotochopper Protection Crushing, Rubbing & Abrasion published monthly by Woods EVEN are Impervious to Oils CW Mill-Hogzilla ...................

15 and RowSolvents.

Electric ............................ 20 Publishing, P.O.–Box 1916, UV RAYS! Both Columbia, TN 38402. All rights Dyna Products ........................ 35 Sawmill Exchange .................. 11 reserved. All editorial/ advertorial Provides Maximum Protection for Logging, For The Distributor submissions are used at the Empire Hydraulics ................... 8 Select Sawmill ......................... 19 Construction & Stationary Applications Like: discretion of the publisher and may Nearest You, Call be edited for purposes of clarity Great• Forklift Lakes Masts Mfg. .................... 34 Smith Sawmill ........................... 4 • Debarker Buggies • Pantograph Arms and space. Although all efforts have • Wheel Loaders • Skidder • Knuckleboom Loaders Hahn Machinery ...................... 3 The Paul Bunyan been made to ensure accuracy of Grapples orShow Visit ......... 39 Fellerbuncher Heads • Harvesting Heads • Stroke content•submitted by advertisers www.pro-tec-toproducts.com Hurst Boiler ............................. 14 Thomas Industrial Controls..... 10 Delimbers • Dozer Blades and writers, the Lumberman's Exchange, its principles and Iron Bull ...................................

21 Union Grove Saw & Knife.. 2, 37 ® Anywhere Hoses associates, are not held liable& forWires Are – Pro-Tec-To Products OEM’s, Repair Facilities & errors or omissions.

Reproduction, Offers Maximum Protection, Lower Reduced KilgoreCosts, Saw .............................

22 Distributor UniversalInquires Refiner ................... 23 Welcome in whole or part, is prohibited Downtime and Lesswith­ Spills!

Lignomat ................................. 24 WoodMizer ................................ l out written consent. ©2017 Woods Publishing

hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including 48" bottom saw and 36" top saw

STACKING RAC

800-355-1250

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 21

L O G G I N G

The Tree that Started it All!

Tigercat 845

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

07 Prentice 950B

“Precision Under Pressure”

Phone 315.284.4126 Item ID: 5368 Fax 315.849.2045 3000 Original hours and has a new set of 30.5 Website Goodyear tires. www.empirehyd.com Email Contact: AUSTIN info@empirehyd.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

John Deere 648E Grapple Skidder Item ID: 82561

John Deere 648E grapple skidder, new crate motor with very few hours, 28L’s about 50%, 1 set bear claws, dry machine, no leaks, recently repacked cylinders, tight centers, very well maintained machine!

Call for more pictures!

TIMBERJACK 380

Item ID: 2323 ‘16 Halverson H140 Has the dual 100in. Exco grapple. Transmission is Eaton 3 speed powershift.

Engine has a new Skidsteer (DEMO) injection pump. Tires tread 40% on three tires, 10% on the oneID: tire. Good machine for the price and for Item JW-909632 the conditions.

Contact: J Williams Contact: JOE401-6367 x701 Ph: (888)

Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 801-362-2170

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

‘93 Barko 180B

Item ID: 14077 '94 John Deere 548E Contact: Austin Item ID: 14185 Ph: (888) 401-6367 x703 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

JD 648G III

96’ Hydro ax 611E

Item ID: 87294

Item ID: 4654

(8.8K hrs) (‘06) New wiring harness and injectors. The grapple won’t rotate all around, but goes up & down, pulls wood just fine. Motor was reman. 4K hrs ago (approx. 4yrs ago). Owner is getting out of logging.

‘95 John Deere C6 Contact: JOETree Farmer Email: Joe@lumbermensco.com

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Phone: 888-401-6367 EXT 13920 709 OR 801-362-2170 Item ID:

‘13 KMC 2500 Track Skidder

L O G G I N G

01’ Timberjack 460D Item ID: 345

BARKO

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT160B 703 OR 931-797-8029 1994 Barko - Electric

off onto a conveyor. This is a very

2003 model just completely serviced, has newer 120” esco Grapple, reman motor, and new hydraulic pump. Skidder is dry and currently working daily.

‘05 Gehl CTL 70

Contact: AUSTIN Email: Austin@lumbermensco.com Item ID: JW-986495 Phone: 888-401-6367 EXT 703 OR 931-797-8029

Contact: J Williams Ph: (888) 401-6367 x701 Item ID: 14236

chain 8 way 2014 John Deere 843K conveyer, 34x26 tires 70-80% runs assplitter, should lowon hour, Item ID: 14073 JD 22B head 20,000lb goose neck trailer.

Item ID Contact: Austin Contact: MARK 13916. Austin x703 Ph: (888) 401-6367 x703Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703 Best Value Portable Log Splitter

drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS CAT 515 Grapple Skidder

Brewco Saws - Two Brewco Saws Item ID: 14257

in excellent condition. Runs great.

around 7000 hours strong winch 50% rubItem IDEverything 13644. Sam ber 28's. worksx702 as it should. Woods ready, call for video!

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor Contact: MARK -Email: It has aMark@lumbermensco.com 353 Detroit diesel, 40 Phone: 888-401-6367 EXT 708 inch insert tooth circle saw, 30 foot

702-875-2703  Issue 364 381

Firewood Processor - This is a Chomper Model 16 PDA

- Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

1995 Barko 775 B Feller Buncher automatice firewood processor Contact: WALKER Email: Walker@lumbermensco.com - Pumps recently redone. 400 hrs with John Deere power unit with Phone: 888-401-6367 EXT 707 on injection pump. always started low hours. Control panel includes amp gauges. Cuts logs up to 16”.

approximately 1500 hours. Hour new for $32,500. Item ID 13865.

Contact: MARK Email: Mark@lumbermensco.com meter dont work. The last 2 owners Sam x702 888-401-6367 EXT 708 or 702-875-2703 only used it to load trucks or LOGGING EQUIPMENT Phone: have

BANDIT648L ‘15 John Deere

Item ID: 14237 1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins Contact: MARK Diesel. 7500 Hours. One owner.

Has Log Lift. Uses 4-way wedge Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703 adjustable to single two way. Great Well maintained.

Item ID 13294.

homemade processor with a 10’

Sam x702

2004 Bandit Beast 595 Model 4680 ‘14 Barko Item ID: 14238 3412 Caterpillar Diesel engine

2014 Barko 595 ML Magnum+ CSI 5300 264 Delimber CSI 4400 with 850 HP. hrs. 18’ Mill in ground log deck. Has a hydraulic grapple,

chain and kicker that all runs

saw 1402 hours, plated lines, hyrdraulic legs, tight, dry, runs as should, ready to work,good on pits trailer, cat kodiak grapple off condition.

Just finished 10

Acre clearing job, ready to work! of a 4 cylinder Mercedes power Contact: MARK Email: Mark@lumbermensco.com control.

Bigorproduction unit. Has a 4’ chain saw that kicks Phone: Remote 888-401-6367 EXT 708 702-875-2703

Lumbermens™  since 1986

❘

Item ID:head 14232 kohing head. works great.

hours a only 300 hours in the last year 65% tracks under sprockets 1999 Barko 160D - new engine with manuals and receipts. Purchased rollers good, everything works as it should. Call for more info

runs as should ready to go, dual arch, good winch

Firewood Processor - This is a

good. in good working order. 22in ‘11 John Deere 753J

John Deere 753J ID Hot saw processor tracked feller buncher, reguItem 13185.

Sam x702 One owner and comes with all2011 lar maintenance, owners manuals as well as mainatance records 7441

2015 John Deere 648L 44” tires 2267 hours 85-90% dry, tight, lowathour, 13HP Honda motor. Manual start Chipper - Cat Under Carriage

Value! PA. Item ID 12062. Sam x702

Item ID: 52342 (excellent condition.). Item ID

2011 model portable loader, has 8,631 hours on it.

13238. Chris x700 Woods ready.

tach, oil pressure, water temp and

‘14 John Deere 843K

quality chips with patented ‘Cone’

grapple, 5,000 original hours.

Knuckle Boom Loader

Sam x702

Item ID: 5458

condition. Easily produces high

knuckleboom, 30' boom, 75hp

motor, Rotobec continuous well built processor. Item ID 13820. 2011 437D John Deere

Franklin Q70

with 1700 hours, in very good

Cat 939C

Item ID: 52119

Item ID: 14078 98’ model with 9000 hours, and new undercarriage.

Contact: Austin capacity!. Item ID 13421. Sam x702 Ph: (888) 401-6367 x703 Contact: AUSTIN

13428 Victory Ln. // PO Box 124 Contact: AUSTIN Adams Center, NY 13606 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘83 John Deere 4850

Contact: Austin Ph: (888) 401-6367 x703

 List  seLL  exchange  buy  save

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

153 Fabtek Processor

CUMMINSItem continuous grapple.

ID: 8763 Runs Great!.

ID 13740.

Sam13133 2001 Fabtek 153, 4 Item roller fabtek harvester head,

frame hours, less than 500 hours on rebuilt motor,

x702 newer sprockets, new turn bank, resealed valve bank,

ready to work! Entire spare parts head included! Call for more pictures!

BELL

1990 Bell Super T - This Bell has Contact: MARK aEmail: brand Mark@lumbermensco.com new Duetz engine. Lever Phone: 888-401-6367 EXT 708 control, 33” bar, pump and tranny

702-875-2703 ❘

 LumbermensCO.com

** CALENDAR** Prentice 180 Item ID: 7822

1994 Model with 10,000 hours, joystick control, 6 cylinder Cummins motor, tight turn NYtable, STATE WOODSMEN'S FIELD DAYS and plumbed for a bucksaw.

Work ready

Fri, 18 August - Sun, 20 August

Contact: AUSTIN Email: Austin@lumbermensco.com Boonville, New York Phone: 888-401-6367 EXT 703 OR 931-797-8029

www.starwebhosting.net/woodsmen/

Cat 525

Cat 525 3304The engine, tires 65%, 13929 Tree hours brand new Started hydraulic pump. that

Hot Springs, Arkansas 2nd owner around 8000 hours, call for more info www.arkloggers.com

it All! Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 Since 1986, Lumbermens has published 702-875-2703 a monthly circular

Contact: MARK 72ND ANNUAL GREAT LAKES Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 LOGGING & HEAVY EQUIPMENT EXPO

702-875-2703

Thurs, 7 Sept - Sat, 9 Sept

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

'93 John Deere&548E MID-ATLANTIC LOGGING BIOMASS Item ID: 14184 Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Selma, North Carolina Contact: AUSTIN Email: Austin@lumbermensco.com www.midatlantic-logging-biomass­ Phone: 888-401-6367 EXT 703 expo.com/

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

'04 John Deere 700H Lexington, Kentucky

MARKETING DIRECTOR

Item ID: 14187 http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams 2004 CAT 525B

(888) 401-6367 ext. 701 Item ID: 14204 j@lumbermens.co

Contact: AUSTIN Email: Austin@lumbermensco.com THE888-401-6367 PAUL BUNYAN SHOW Phone: EXT 703

Contact: AUSTIN DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 703

Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

** INFO LINK**

BANDMILLS & HEADSAWS

dry tight everything on sprockets roller idlers chains all tracks and undercarriage is 1 year old and 90% w/winch, winchBand has reverse 6-way- Roughly blade screens Danckaert Resaw and ropes open cab taken good care of 4900.7 hours.

10 hours on this machine since it

has been rebuilt, it has a 24foot in Contact: MARK feed deck 20 foot out feed deck Email: Mark@lumbermensco.com Phone: 888-401-6367 708 with 44 inch wheels, andEXT all the

702-875-2703 bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine

in1994 ve1y good condition, Cuts 130B Timberjack 240 Item ID:74044 feet a minute also has CLT presses.

Item IDSkidder.

13876. Austin cable 7,225x703 hours on a rebuilt engine.

Winch S & W 125 Band Mill with works good. Woods ready.

Caterpillar generator - Low hours Contact: on the mill,WALKER electronic computer Set Email: Walker@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 707 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES P.O. Box 170 • Prentice WI 54556-0170 • 800-243-5438 2010 Cardinal HD Carriage

www.multitekinc.com • sales@multitekinc.com

Carriages (Sawmill) - Cardinal

Multitek Firewood Processors

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Carriage line it includes carriage

with onboard log turners, carriage drive, hyd pac for carriage,

Increase5, Your Productivity Profitability Saw .....................and 29 Baker ......................................

7 Menominee sawyers cab, computer controls,

Quality Equipment to Reduce your Labor Costs cabinet with electronic drives for Inc. ..............

30 Bell's Machining•.....................

27 Metal Detector's • Circular Saw or Bar & Chain Models carriage knees, husk including Brute Force Mfg. ..................... 31 Midwest Sharpening.............. 26 • 7 Models to Choose From 48" bottom saw and 36" top saw Morbark ..................................... 9 • Production Ratings up to 5.5 Full Cords Per Hour

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

STACKING RAC Made in the U.S.A.

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 23

L O G G I N G

'03FOREST 670 Hydro-Ax SOUTHWEST PRODUCTS EXPO Item-ID: 14138 Fri, 25 August Sat, 26 August

Item ID: 14155

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at '06 John Deere 700J www.LumberMB\ISmagazine.com Item ID: 14194

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

'97 Hydro AX-411 EX Bar Saw Head

‘16 Halverson H140 Skidsteer (DEMO) 04’ TimberKing 540DS

Item ID: 98754

Heat works. Air needs charging.

Tires inc., great shape tires chains to go with it bear claws.

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

2011 CAT 525C

Item ID: JW-909632 Item ID: 14205 Contact: J Williams Contact: Ph: (888)AUSTIN 401-6367 x701

Item ID: 14203

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘93 Barko 180B

Item ID: 14077 Contact: Austin Prentice Ph: 98’ (888) 401-6367410E x703 Item ID: 14206

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

John Deere 444k Item ID: 9302

2009 model and is a one owner machine with 4900 original hours. Condition is like new. Ready to go to work.

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

Timbco 415 w/Fabtek Head

‘13 KMC 2500 Track Skidder

L O G G I N G

Item ID: 8837

‘89 Timberjack 380A

2001 timbco 415 fabtek 5head reabuilt head 5900 hours on rebuilt John Deere engine approx 22k frame 90% tracks and undercarriage. Ready to work. Call for 13428 Victory Ln. // PO Box more pictures!

Item ID:ID: 14078 Item 14039 Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703

124 Adams Center, NY 13606 Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

Mid 90’s Husky Brute 335XL

ID:13421.

14088Sam x702 capacity!.Item Item ID

off onto a conveyor. This is a very Item ID: 7701 Sam x702

grapple, 5,000 original hours.

well built processor.

Item ID 13820.

John Deere 648G3 Grapple Skidder 2005 John Deere 648G3 grapple skidder approx 17k frame hours brandFirewood new cradle, cylinoid on the turn on grapple Processor - This is needs replaced, o ring on the front by the hydraulic pump leaks a little bit, new head block, new crank, valve bank redone, 16"As PDA transmissionais Chomper tight, no blow Model by in motor. clean a motor as you'll see" dry machine, currently working. Call for more pictures!

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

BARKO Contact: AUSTIN Email: Austin@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 703 knuckleboom, 30' boom, 75hp

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘05 Gehl CTL 70

‘95 John Deere C6 Tree Farmer

automatice firewood processor

Contact: MARK with John Deere power unit with Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

Caterpillar

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 with 1700 hours, in very good

lbs, HP,and New Firestone chain conveyer, 8 way splitter,17,000 on One100 owner comes with all23 x 126, Power Shift New Hyd Pump, New 20,000lb goose neck trailer. Item ID Shaft, manuals receipts.

Purchased Winch Newand Hyd Park Brake.

13916. Austin x703 for $32,500. Item ID 13865.

Contact:new SAM Email: Sam@lumbermensco.com Best Value Portable Log Splitter Sam x702 Phone: 888-401-6367 EXT 702 - Small manufacturer in PA has LOGGING EQUIPMENT

on injection pump. always started Item ID: 2476 good. in good working order. 22in Product no. 4194, Cab with cold AC, kohing head. head works great.

SH56 Bunching Head, 28L-26 Tires At 60%, Center Tight, Runs Great, Item ID 13185. Sam x702 Machine Has New Injectors, New Fan Motors, 1999 Barko On 160D new engine And Clutch AC, -11,111 Hours. with approximately Contact: SAM1500 hours. Hour Email:dont Sam@lumbermensco.com meter work. The last 2 owners Phone: 888-401-6367 EXT 702 have only used it to load trucks or

quality chips with patented ‘Cone’

Handles logs up to 32”. Uses

delimber, grapple has been rebuilt.

‘83 John Deere 4850

‘00ID: Timberjack 1110 Item 14073 Item ID: 14033 Contact: Austin Ph: (888) 401-6367 x703 Contact: AUSTIN

condition. Easily produces high

drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

Johncondition.

Deere Runs 540B in excellent great.

Item ID: 0908 Item ID 13644. Sam x702 All FIREWOOD Refurbished!PROCESSORS 4K Original Hours!

2010 Shop Built Wood Processor SAM - Contact: It has a 353 Detroit diesel, 40 Email: Sam@lumbermensco.com inch insert tooth circle saw, 30 foot Phone: 888-401-6367 EXT 702  Issue 364 381

made the best valued log splitter.

John

low hours. Control panel includes tach, oil Deere pressure, 540D water temp and John Item ID: 5613 amp gauges.

Cuts logs up to 16”.

BANDIT Deere 437D Log Loader Item ID: 8834 1999 Bandit 1900 Tracked Disc

13HP Honda motor. Manual start - Cat Under Carriage Product Chipper No. 4204, Extra Clean, 10K at Hours, Stock Photo Delimber but electronic option is available.

50% or better. 475 hp Cummins Contact:Diesel.

SAM 7500 Hours. One owner.

Has Log Lift. Uses 4-way wedge Email: Sam@lumbermensco.com adjustable to single two way. Great Well maintained. Item ID 13294.

Phone: 888-401-6367 EXT 702 Value! PA. Item ID 12062. Sam x702 Sam x702 Firewood Processor - This is a

homemade processor with a 10’

2004 Bandit Beast425 Model 4680 2005 Timbco EXL Item ID: 14275 3412 Caterpillar Diesel engine

with 2015 sp761lf head 1000 hrs. hours Mill on head withharvester 850 HP. 5300 inand 2015 log deck. Has a hydraulic grapple, dasa 5 computer system frame hours 10,900 Undercarriage 75% no leaksgood dry, rebuilt final drive the other final drive10 is new, chain and kicker that all runs off condition.

Just finished engine has ECM, new swing drive gear box, new implement pump

of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that

Lumbermens™  since 1986

❘

Acre clearing job, ready to work!

Contact: MARK Email: Mark@lumbermensco.com Remote control. Big production kicks Phone: 888-401-6367 EXT 708 OR 702-875-2703

 List  seLL  exchange  buy  save

as a backup as needed. Has a CTR Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

96’ John BELL Deere 643D

Item ID: 14207 1990 Bell Super T - This Bell has Contact: AUSTIN a brand new Duetz engine. Lever Email: Austin@lumbermensco.com control, bar, pump and Phone:33” 888-401-6367 EXTtranny 703 ❘

 LumbermensCO.com

** CALENDAR**

Ecolog 590D Item ID: 874

L’S FIREWOOD PROCESSORS 2011 model with 12800 hours, has Logmax 6000B series Head. Lots of recent work done.

NY STATE Work ready!

Fri, Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

WOODSMEN'S FIELD DAYS 18 August - Sun, 20 August

Boonville, New York www.starwebhosting.net/woodsmen/ '94 CAT 518

Grapple Winch

PRODUCTS Timberpro TF 830C SOUTHWEST FOREST Item ID: 99807 EXPO The Tree that Started it All!

Item ID: 8077

Fri, 25 August - Sat, 26 August

2018 Timberpro combo 830c tier 3. Has 2018 SP 761 danglehead with top saw and 2018 supergrip 360 bucket, 2 sets of tracks, fire suppression, pre heater, LED lights, 700 hours working daily, under warranty until March of 2019

12k hours runs great tight center Hot Springs, Arkansas section www.arkloggers.com Contact: SAM

4000 SERIES

72ND ANNUAL GREAT LAKES Contact: MARK Email: Sam@lumbermensco.com Email: Mark@lumbermensco.com Since 1986, Lumbermens has LOGGING & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 702 Phone: 888-401-6367 EXT 708 OR 702-875-2703 published a monthly circular Thurs, 7 Sept - Sat, 9 Sept

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS 15 Sept - Sat, 16 Sept 5600Fri, Hours, 23.1 Tires.

Selma, North Carolina BELL’S FIREWOOD PROCESSORS www.midatlantic-logging-biomass­

Woods Publishing

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

John Williams • 67 HP CAT Diesel (888) 401-6367 ext. 701 Engine Item ID: 14208 j@lumbermens.co • 44” Circular Saw

feed deck 20 foot out feed deck Contact: MARK

Email: Mark@lumbermensco.com with 44888-401-6367 inch wheels, and Phone: EXT 708all ORthe

bells and 702-875-2703 whistles, its a production

pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine

4000 SERIES Danzco Delimber inPT20H ve1y good condition, Cuts 130 KENTUCKY WOOD EXPO Item ID: 14134 feet a minute also has CLT presses.

Fri, 15 Sept - Sat,720B 16 Sept TIGERCAT

Lexington, Kentucky Item ID: 542 http://www.kfia.org/ This feller buncher comes with a high speed "Quadco" cutter.

Odometer shows 7000hrs. 500hrs ago a new motor (rebuilt) KentuckyWoodExpo.aspx was installed. 90% tires tread. The A/C doesn’t work. It's been

BELL’S FIREWOOD PROCESSORS Many Models & Options to Choose From!

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct BELL’S FIREWOOD FIREWOOD PROCESSORS PROCESSORS Cambridge, Ohio EQUIPMENT REPS • 20” Diameter Contact: AUSTIN DESIGN DIRECTOR Capacity Email: Austin@lumbermensco.com • SingleDonna JoystickHeninger Phone: 888-401-6367 EXT 703 Control

it includes two sets of Mcdonough

parked for about 4-5 months. READY TO GO!!

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

• 30 Ton Splitter Cylinder Sam Wall

Excellent condition, motorx703 rebuilt about Item ID 13876.

Austin 300 hours ago less than 2700 original Shours & W 125 Band Mill with

Caterpillar generator - Low hours Contact: MARK on the mill, electronic computer Set Email: Mark@lumbermensco.com Phone:1/2" 888-401-6367 works,1 or 2" band,EXT 22ft.708 track

702-875-2703 Cat 3406 140KW Genset, 12,400

www.ohioforest.org Many Models & Options to Choose From! hours ready to run. Item ID 13434.

401-6367 ext. 702 • 67 HP CAT(888) Diesel 4000 SERIES Sam x702 • 67 HP CAT Diesel 4000 SERIES sam@lumbermens.co Engine Engine CARRIAGES & DRIVES FIREWOOD TUMBLER • 44” Circular Saw • 44” CircularWoods Saw Austin • 20” Diameter • ext.

Sturdy • 20” Diameter 2010 Cardinal HD Carriage (888) 401-6367 703 HSS Steel Welded FIREWOOD TUMBLER Capacity Capacityaustin@lumbermens.co • Sturdy HSS Steel Welded • 4’ Diameter Barrel Carriages (Sawmill) - Cardinal • Single Joystick Many Models & Chute Options to Choose From! 4000 •SERIES 4’ Diameter Barrel • HP CAT Diesel • Single Joystick 4000SERIES • 67 67Control • Clean Out MAILING ADDRESS • Clean Out Chute Carriage line it includes carriage Engine Control •Engine 30 Ton Splitter • Removes Debris & Bark as large B & B&Mfg . ...............................

Gauge .............................

28as 2 ¼” • Removes Debris Bark as large as 218¼”M&F P.O. Box 1916 • Circular • 44” 44” Saw Cylinder • 30 Ton Splitter with Lift onboard log turners, carriage • Works with all of our Double chain Hydraulic conveyors TN 38402-1916 • • 20” 20” Diameter • Works with allB.of Double chain Hydraulic Lift Mill, conveyors Cylinder Columbia, • Optional Honda Pack Available H. our Payne ..............................

16 Meadows IncPower . ................

33 drive, hyd pac for carriage, Capacity Capacity (888) 401-6367 • Optional Honda Power Pack Available Barko 495B • Single Single Joystick • Menominee Saw .....................

29 FIREWOOD TUMBLER Baker ......................................

5, 7 sawyers cab, computer controls, AD SUBMISSIONS Item ID: 44764 Control • Sturdy HSS Steel Welded • 67 HP CATControl Diesel 4000 SERIES May be sent to­ cabinet electronic drives forJohn • 30 30 Ton Splitter Machining •Bell's 4’ Diameter Barrel..................... 27 Metal Detector's Inc . .............. 30 2016 modelwith with 3900 hours, csi delimber on big Engine • morris@lumbermens.co Cylinder trailer fully plated.

Cylinder • Clean Out Chute • 44” Circular Saw carriage knees, husk including Many Models & Options to Choose From!

Force Mfg&. .....................

Sharpening.............. 26 •Brute Removes Debris Bark as large31 as 2 Midwest ¼” • 20” Diameter POSTMASTER Contact: 48" bottom AUSTIN saw and 36" top saw • Works with all of our Double chain Hydraulic Lift conveyors Capacity Email: Austin@lumbermensco.com Made In Buck Equipment (AIM) ........

36 Mor bark .....................................

9 Send address changes to: • Optional Honda Power Pack Available Many Models & Options to Choose From!

Canada Phone: 888-401-6367 EXT 703 • Single Joystick Lumberman's Exchange

931-797-8029 Corley Mfg ..............................

32 Multitek ...................................

12 Control P.O. Box 1916 • 30 Ton Splitter FIREWOOD TUMBLER Columbia, TN 38402 CRD Metalworks .................... 25 Piper's Saw Shop.................... 13 • Sturdy HSS Steel Welded Cylinder

BELL’S FIREWOOD PROCESSORS

** INFO LINK**

Many 4’ Diameterto Barrel Many Models Models &&• Options Options toChoose ChooseFrom!

From!

MadeCW In Mill-ArmorHog Please The Lumberman's Exchange is Rotochopper ..............Call 17 for Details ............................ 40 • Clean Out Chute Canada published monthly by Woods • Removes Debris & Bark as large as 2 ¼” FIREWOOD TUMBLER CW Mill-Hogzilla ...................

15 Hydraulic Row Electric ............................ 20 Publishing, P.O. Box 1916, • Works all of our Double chain Lift conveyors • Sturdy HSSwith Steel Welded In Power Pack Available • OptionalMade Honda Columbia, TN 38402. All rights • 4’Dyna Diameter Barrel or Canada visit us online www.bellsmachining.com Products ........................

35 Sawmill Exchange .................. 11 reserved. All editorial/ advertorial • CleanFIREWOOD Out Chute Financing Available TUMBLER submissions are used at the Empire Hydraulics ...................

8 as Select FIREWOOD TUMBLER Debris Bark as large 2 ¼” Sawmill ......................... 19 • Sturdy HSS&Steel Welded discretion of the publisher and may • Removes • Sturdy HSS Steel Welded • Works allMfg of our Double chain Hydraulic Lift conveyors • with 4’ Diameter be edited for purposes of clarity Great . Barrel ....................

34 Smith Sawmill ........................... 4 • Lakes 4’Honda Diameter Barrel • Clean Out Power Chute Pack Available and space. Although all efforts have • Optional • Machinery Clean Out Chute TheasPaul Hahn ......................

• Removes Debris & Bark as3large 2 ¼”Bunyan Show ......... 39 been made to ensurePlease accuracy Call of for Details • Removes Debris & Bark as large as 2 ¼” content submitted by advertisers • Works with all of our Double chain Hydraulic Lift conveyors Made In Works............................. with all ofPower our Double chain Hydraulic conveyors Hurst Boiler 14 Available Thomas IndustrialLift Controls ..... 10 and writers, the Lumberman's ••Optional Honda Pack Canada FIREWOOD•TUMBLER Optional Honda Power Pack Available Exchange, its principles and IronHSS BullSteel ...................................

21 Union Grove Saw & Knife.. 2, 37 • Sturdy Welded or visitareusnotonline www.bellsmachining.com associates, held liable for • 4’ Diameter Barrel errors or omissions. Financing Reproduction, Available Kilgore Saw ............................. 22 Universal Refiner ................... 23 • Clean Out Chute in whole or part, is prohibited with­ • Removes Debris & Bark as large as Lignomat .................................

24 2 ¼” WoodMizer ................................ l out written consent.

Please Call• for Details Works with all of our Double chain Hydraulic Lift conveyors Made In ©2017 Woods Publishing • Optional Honda Power Pack Available Canada

1-888-995-1965

STACKING RAC

Many Models & Options to Choose From!

Please Call for Details

1-888-995-1965 888-995-1965

nline www.bellsmachining.com Financing Available

1-888-995-1965  SELL YOUR EQUIPMENT TODAY

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

l§ SELL EQUIPMENT TODAY MadeYOUR In or visit us online www.bellsmachining.com Canada Made In Canada Financing Available

❘

 24/7 SUPPORT 0 SUPPORT

Tigercat 604 Cable Skidder Item ID: 6552

approx. 7000 frame hours, brand new log arch, new fuel filter, new engine, new water pump, new pick up pump, new injector pump, 5-1000 hours on the new motor, very tight, very dry machine, Clark winch, stout winch 30% tires comes with set of chains at 80% Excellent machine Call for more pictures and video!

Contact: MARK Email: Mark@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 708 I S73.663.7711 800.S48.6914 702-875-2703 ❘ L!  (888) 401-MENS 401-MENS

NO. 25

L O G G I N G

• 67 HP CAT Diesel Engine • 44” Circular Saw • 20” Diameter Capacity • Single Joystick Control • 30 Ton Splitter Cylinder

Contact: SAM Email: Sam@lumbermensco.com expo.com/ Phone: 888-401-6367 EXT 702

International TD15 BELL’S FIREWOOD PROCESSORS 4000 SERIES Bull Dozer MARKETING DIRECTOR

Item ID: 1876

BANDMILLS & HEADSAWS

two 2001 660 timberjack grapple skidders. Working machine has tigercat bunching grapple on it, dual arch machines, one has two nice double diamond chains, dry Machines, 3000 Danckaert Band Resaw - Roughly hours on rebuilt 8.3 cummins engine, brand new $8k dollar hydraulic pump 1 1/2 week ago, the other machine 10 hours on this machine sincehydraulic it pump is at approx 200, CAB IS BURNT, everything else on machine is in good working order. Selling only because mahas rebuilt, it has 24foot chinesbeen are too big.

Package Only Call foramore picturesin

machine, with air strain conveyers '13 John Deere PROCESSORS 548G III BELL’S FIREWOOD that go up and down, with airbags, Item ID: 8789

PUBLISHER

ADVERTISING SALES

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com 660 Grapple Skidder

“Precision Under Pressure”

892 Valmet Forwarder

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Item ID: 4040

1995 Valmet 892 forwarder Volvo td6 motor, motor rebuilt appox 4000 hours ago, dry doesn't burn any oil Put sure-grip controls in it and all new windows resealed valve body for hydraulic functions and resealed the jib cylinder bought just for a backup machine hardly used it Call for more pictures!

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703

‘16 Halverson H140 '96 CAT 515 Log Skidder

John Deere 753J

Item ID: 7534

Skidsteer (DEMO)

Item ID: 14258

REDUCED PRICE! Single Arch Glass Cab, 28L X 26 Item ID: JW-909632 Tires 50/40%, New Bear Paws On Front, Ice Chains Rear, Esco 84’ Grapple, New Cutting Edge On Blade, Contact: J Williams All Cylinders Just Rebuilt, 12,800 Hrs.

2013 John Deere 753J with Quadco 360 hotsaw head 3,215 hours. Everything runs and works as it should

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

Ph: (888) 401-6367 x701

Contact: SAM • Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: ‘80 (888) 401-6367 John Deerex703 550 Item ID: 14037

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

'07 John Deere 848H Grapple Skidder Item ID: 6566

Product No. 1876, 11,066 Frame Hours, New Engine At 8,800 Hours, Dual Arch Winch, Chains On All Four Tires, Working Daily In Woods.

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

L O G G I N G

‘13 KMC 2500 Track Skidder

‘14 B66TD Rotochopper

Item ID: ID: 14078 Item 13838 Contact: Austin Contact:Ph: SAM (888) 401-6367 x703

12’ JohnVictory Deere 437D 13428 Ln. // PO Box 124

Item ID: 14209 Adams Center, NY 13606 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

grapple, 5,000 original hours.

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 with 1700 hours, in very good condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws Franklin 2005 Q70 Item ID: 5579 in excellent condition. Runs great.

Item 13644.New SamRubber, x702 Heat/ LowID Hours!

ACFIREWOOD Takes No Oil. Great Running PROCESSORS Skidder.

2010 Shop Built Wood Processor

SAM - Contact: It has a 353 Detroit diesel, 40 Email: Sam@lumbermensco.com inch insert tooth circle saw, 30 foot Phone: 888-401-6367 EXT 702  Issue 364 381

Item ID: JW-986495 Contact: SAMwith • Email: JohnSam@lumbermensco.com Deere power unit with EXT 702 Contact: J Williams Phone: 888-401-6367 low hours. Control panel includes Ph: (888) 401-6367 x701 tach, oil pressure, water temp and

chain conveyer, 8 way splitter,It on has

Timberjack 1270C amp gauges. Cuts logs up to 16”.

a

Item ID: 8676 One owner and comes with all Timberjack 762C head with a Timberjack 3000

computer. It comes with an extra set of delimbing knives and 20,000lb goose neck trailer. Item ID manuals and receipts. Purchased book on the head.

13916. Austin x703

Best Value Portable Log

new for $32,500. Item ID 13865.

Contact: JOE Email: Joe@lumbermensco.com Splitter Sam x702EXT 709 OR 801-362-2170 Phone: 888-401-6367

- Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

LOGGING EQUIPMENT BANDIT '92 CAT 518

Item ID: 14198 1999 Bandit 1900 Tracked Disc

1992 CAT 518 6000 original frame hours! Carriage Rebuilt motor 13HP Honda motor. Manual start Chipper - Cat Under atand transmission with less than 1000 hours, excellent winch, great machine.

Callor forbetter. video 475 hp Cummins but electronic option is available.

50%

Diesel.

7500 Hours. One owner.

Has Log Lift. Uses 4-way wedge Contact: MARK Email: Mark@lumbermensco.com adjustable to single two way. Great Well maintained.

Item ID 13294.

Phone: 888-401-6367 EXT 708 or 702-875-2703 Value! PA. Item ID 12062. Sam x702 Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple,

2004 Bandit Beast Model 4680 3412 engine ‘97Caterpillar TimbcoDiesel 425D ID:5300 13950 with Item 850 HP. hrs. Mill in

chain and kicker that all runs off condition. Just finished 10 Contact:good AUSTIN Email: Austin@lumbermensco.com Acre clearing job, ready to work! of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 Remote control. Big production unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

CurrentlyItem has ID 3316 hours. capacity!.

13421.

Sam x702

SamItem x702 ID: 7698

‘05 Gehl CTL 70

10’ John Deere 648H

Item ID: 14110

off onto a conveyor. This is a very

Firewood - This Product No. 1707, 3304 CATProcessor Engine 1-1/2 Yearsis Old, New Oil Cooler, Rebuilt Radiator, New Injector Pump, New a Chomper Model 16 PDA Hydraulic Pump, New Main Lines, New Arch, New Blade Plate, Good Air Brakes. automatice firewood processor

Item ID: 14073 Item ID: 14210 Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703

Item ID: 13920 Contact: Austin Ph: (888) x703 90’ CAT 401-6367 213 Excavator

BARKO Contact: AUSTIN Email: Austin@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 703 knuckleboom, 30' boom, 75hp

Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

well built processor.

Item ID 13820.

'94 CAT 518C Cable Skidder

‘83 John Deere 4850

‘95 John Deere C6 Tree Farmer

 List  seLL  exchange  buy  save

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item‘05 ID 13185.

Sam x702608B Timberjack Item 13898 1999 Barko 160DID: - new engine with

Contact: SAM1500 hours. Hour approximately Email: Sam@lumbermensco.com meter dont work. The last 2 owners Phone: 888-401-6367 EXT 702 have only used it to load trucks or as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

525Dgrapple.

CUMMINS CAT continuous Item ID: 9555 Runs Great!. Item ID 13740. Sam

(7.5K hrs) Brand new CAT transmission approx. 2000hrs ago.

CAT itself rebuilt the engine approx. 600hrs ago. Tires size x702

30.5 32 tire w/85% tread remaining. Dual arch with a winch.

Being used everyday! No issues! Very nice machine! Clean and tight!

BELL

1990 Bell Super T - This Bell has Contact: JOE aEmail: brandJoe@lumbermensco.com new Duetz engine. Lever Phone: 888-401-6367 EXTtranny 709 control, 33” bar, pump and

801-362-2170 ❘

 LumbermensCO.com

** CALENDAR**

‘97 Timberjack 240D Item ID: 13917

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

FOR CLASSIFIEDS 93’ Prentice 210

CallItem 888.401.MENS ID: 14216 Contact: AUSTIN See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Email: Austin@lumbermensco.com Fri, 18 August - Sun, 20 August Location of all equipment at Phone: 888-401-6367 EXT 703 Boonville, New York www.LumberMB\ISmagazine.com www.starwebhosting.net/woodsmen/

The Tree that Started it All!

BANDMILLS & HEADSAWS SOUTHWEST FOREST PRODUCTS EXPO Danckaert Resaw - Roughly Fri, 25 August - Sat, 26 August 2011 JohnBand Deere 648H

‘99 Hydro-Ax 511 EX Item ID: 13799

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

EQUIPMENT REPS

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

Contact: AUSTIN Email: Austin@lumbermensco.comTHE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct Phone: 888-401-6367 EXT 703

in ve1y good condition, Cuts 130

Timberjack 230 Item ID 13876. Austin x703 Item ID: 1977 S & W 125 Band Mill with Contact:Caterpillar AUSTIN generator - Low hours Email: Austin@lumbermensco.com on the mill, electronic Set Phone: 888-401-6367 EXT 703computer OR 931-797-8029 works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Shrink Wrap ** INFO LINK** FireWOOD/WaSteWOOD

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Corley Mfg 32 Multitek Sell Your WOOD –.............................. $300/cord or ...................................

More! 12

Double or triple your profits by shrink wrapping wastewood - foreCW Mill-ArmorHog .............. 17 Rotochopper............................ 40 wood with WOOD-PAKer! Attractive various size packages can be CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 obtained with our high production, easily operated and affordable Dyna Products ........................ 35 Sawmill Exchange .................. 11 machines. Eight machines available. The ideal equipment for producEmpire Hydraulics ................... 8 Select Sawmill ......................... 19 ing square bundles-palletizable for ease in storage and transporting.

Great Lakes Mfg. .................... 34 Smith Sawmill ........................... 4 Inquire for free details. Video and Package samples at nominal fee.

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

B & B Manufacturing Hurst • 3007 West River Road • Olean, NYControls 14760 Boiler .............................

14 Thomas Industrial ..... 10

Toll Free 1-800-654-5320 Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat .................................

24 WoodMizer ................................ l E-mail: bbmfg@verizon.net • Web: www.bbmfg.org

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

feet a minute also has CLT presses.

 24/7 SUPPORT 0 SUPPORT

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage,

2004 Timbco 445EXL

sawyers cab, computer controls, Item ID: 14170

‘97 Timberjack 360C

cabinet with electronic drives for 85% Undercarriage. carriage knees, husk including Contact: AUSTIN 48" bottom and 36" top saw Item ID:saw 14044 Email: Austin@lumbermensco.com Contact: Sam Phone: 888-401-6367 EXT 703

STACKING RAC

Ph: (888) 401-6367 x702

John Deere 548D

Item ID: 14024 Contact: Sam ‘80 John Deere 540B Item ID: 11345 Ph: (888) 401-6367 x702 Contact: AUSTIN Email: Austin@lumbermensco.com Has a 2000 hour warranty. It comes www.BakerProducts.net Phone: 888-401-6367 EXT 703 800.S48.6914 I S73.663.7711 mounted on 30.5 tires at 95%.

with401-MENS a 22” tower head. ❘ Comes  (888) NO.Item 27 L! 401-MENS ID 13864. Sam x702 2015 John Deere 748L - This is

L O G G I N G

Contact: MARK DESIGN DIRECTOR Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 Donna Heninger

702-875-2703

12’ John Deere 843K Item ID: 14212

that up and down, with airbags, 07’goTigercat 724E Item two ID: 14218 it includes sets of Mcdonough

pressure guides. Top Casting wheel Contact: AUSTIN Selma, North Carolina Email: Austin@lumbermensco.com www.midatlantic-logging-biomass­ is supported on both sides. This Phone: 888-401-6367 EXT 703 expo.com/ is an extremely accurate machine

Item ID: 3577

j@lumbermens.co

machine, with air strain conveyers

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

morris@lumbermens.co

Cat 518, approx 12,000 frame hours, 1500 on rebuilt engine and transmission, center pins are tight, dry maMARKETING DIRECTOR chine, currently working 28L's 30%, seller has 23.1's at John 80% or better that he can Williams include for an extra $4k, seller is retiring(888) from logging.

Call for more pictures!

401-6367 ext.

701

bells and whistles, its a production

Escanaba, Michigan

PUBLISHER

Woods CAT(888) 518Morris Grapple Skidder 401-6367 ext. 704

been rebuilt, it has a 24foot in Contact:has AUSTIN Email: Austin@lumbermensco.com feed deck 20 foot out feed deck 72ND ANNUAL GREAT LAKES Phone: 888-401-6367 EXT 703 with 44 inch wheels, and all the LOGGING & HEAVY EQUIPMENT EXPO

Thurs, 7 Sept - Sat, 9 Sept

Woods Publishing

ADVERTISING SALES

ItemonID: 14217 10 hours this machine since it

Hot Springs, Arkansas www.arkloggers.com

John Deere 648G III

“Precision Under Pressure”

PRENTICE 410EX

Phone 315.284.4126Item ID: 2929 Fax (12K hrs) Front tires new, back tires 75% remaining tread.

315.849.2045 Transmission has an issue: it is s as if every other gear Website didn't work (2nd, 4th... etc...), therefore going to sell as-is www.empirehyd.com (cheaper) Email Contact: JOE info@empirehyd.com Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

Item ID: 3280

Tight machine, no issues! It sits on a Pitts-trailer and it's currently operating, everyday! Owner just installed a brand new grapple on July 11. A/C not working properly, tires tread 60%. Works and runs smoothly. READY TO GO!

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

‘16 Halverson H140 Skidsteer (DEMO)

BELL Super T Item ID: 6145

‘93 Barko 180B Item ID: 14077

‘93 John Deere Contact: Austin 548E

14083 x703 Ph: Item (888)ID: 401-6367 Item ID: JW-909632 Contact: AUSTIN Contact: J Williams Email: Austin@lumbermensco.com Ph: (888) 401-6367 x701 Phone: 888-401-6367 EXT 703

It has a Deutze engine, lever controls, undercarriage is NEW along w/motor & transmission re-done approx. 1,000hrs ago.

It has a 32in. BELL head. In really great conditions and being used daily. A/C - heat works good. Everything in working order.

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

‘94 Caterpillar 320 Item ID: 13936

L O G G I N G

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘13 KMC 2500 Track Skidder 2012 Cat D6K XL

Item ID: ID: 14078 Item 14169 Contact: Austin Contact:Ph: AUSTIN (888) 401-6367 x703

‘11 Tigercat 620D 13428 Victory Ln. // PO Box 124

Item ID: 13929 Adams Center, NY 13606 Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam611 x702Ex-Hydro Ax ‘98

Firewood ItemProcessor ID: 13948- This is

‘05 Gehl CTL 70

‘83 John Deere 4850

‘1414073 CAT 535C Item ID: Item ID: 13840 Contact: Austin Contact: SAM Ph: (888) 401-6367 x703

Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 with 1700 hours, in very good condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

a Chomper Contact: AUSTIN Model 16 PDA Email: Austin@lumbermensco.com automatice firewood processor Phone: 888-401-6367 EXT 703 with John Deere power unit with

low hours. Control panel includes

tach, oil pressure, temp and 210 Terex Wheelwater Loader

Item ID:Cuts 14283 amp gauges. logs up to 16”.

2013 210 terex loader .

1560.

Excellent chain conveyer, 8 way splitter, on One owner and comesHrs with all condition everything works as should!

20,000lb goose neck trailer. Item ID manuals and receipts. Purchased 13916. Austin x703

Best Value Portable Log

Contact: MARK new for $32,500. Item ID 13865.

Email: Mark@lumbermensco.com Phone: 888-401-6367 Splitter Sam x702 EXT 708 OR 702-875-2703

LOGGING EQUIPMENT BANDIT 1999 Bandit 1900 ‘05 TigercatTracked 230B Disc

- Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

Item ID: Under 13911Carriage at Chipper - Cat

13HP Honda motor. Manual start

but electronic option is available. or better. 475 hp Cummins Contact:50% AUSTIN Email: Austin@lumbermensco.com Diesel. 7500 Hours. One owner.

Has Log Lift. Uses 4-way wedge Phone: 888-401-6367 EXT 703 adjustable to single two way. Great Well maintained. Item ID 13294.

01’ Ponsee Bison in excellent condition. Runs great.

Forwarder

Value! PA. Item ID 12062. Sam x702

FIREWOOD PROCESSORS Comes with a set of tracks.

log deck. Has a hydraulic grapple,

Item Sam ID: 14109 Item ID 13644. x702

2010 Shop Built Wood Processor AUSTIN -Contact: It has a 353 Detroit diesel, 40 Email: Austin@lumbermensco.com inch insert tooth circle saw, foot Phone: 888-401-6367 EXT30 703  Issue 364 381

Firewood Processor - This is a

homemade processor with a 10’

Sam x702

2004 Bandit Beast Model 4680 -

Caterpillar Diesel engine 90's3412 Model Timberjack 240A ID:5300 14111 with Item 850 HP. hrs. Mill in

chain and kicker that all runs off condition. Just finished 10 Contact:good WALKER

Email: Walker@lumbermensco.com Acre clearing job, ready to work! of a 4 cylinder Mercedes power Phone: 888-401-6367 Remote control.EXT Big707 production unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

 List  seLL  exchange  buy  save

‘95 John Deere C6 Tree Farmer Item ID: 13920 Contact: Austin CAT 559C Ph: (888)Item 401-6367 ID: 269 x703

(11.5K hrs) Comes with the 426 CTR delimber.

Needs nothing. Clean tight, no slack, turn gear tight! Working everyday.

capacity!. Item ID 13421. Sam x702 Contact: JOE BARKO Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 1994 Barko 160B - Electric

801-362-2170 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID‘89 13185. x702 CATSam D4H LGP Item ID: 13999 1999 Barko 160D - new engine with

Contact: AUSTIN approximately 1500 hours. Hour Email: Austin@lumbermensco.com meter dont work. The last 2 owners Phone: 888-401-6367 EXT 703 have only used it to load trucks or as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

‘85 John BELL Deere 440D

Item ID: 12453 1990 Bell Super T - This Bell has AUSTIN aContact: brand new Duetz engine. Lever Email: Austin@lumbermensco.com control, 33” bar, pump and tranny Phone: 888-401-6367 EXT 703 ❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

'01 John Deere 648G3 Item ID: 90899

The Tree

Excellentthat Condition Low Price!

Started Contact: SAMit All!

Email: Sam@lumbermensco.com Since 1986, Lumbermens Phone: 888-401-6367 EXT has 702

published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

John Deere 437C SOUTHWEST FOREST PRODUCTS EXPO Item ID: 1020 Fri, 25 August - Sat, 26 August Prentice 384 with 2010 model with 8500 hours, comes with a bucksaw, Hot Springs, Arkansas Bucksaw & Delimber has never had a delimber mounted on it and primarily Contact: AUSTIN 72NDContact: ANNUALAUSTIN GREAT LAKES Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 LOGGING & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 703

931-797-8029

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co John Deere 548G3

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

‘03 John Deere 748GIII

Contact: AUSTIN DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 703

931-797-8029

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

j@lumbermens.co

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Item ID: 13851

that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Item ID532 13876.CAT Austin x703 Feller

Lexington, Kentucky http://www.kfia.org/ 06’ Franklin Q80 Item ID: 14214 KentuckyWoodExpo.aspx Contact: AUSTIN

THE Email: PAUL Austin@lumbermensco.com BUNYAN SHOW Fri,Phone: 6 Oct888-401-6367 - Sun, 8 OctEXT 703 Cambridge, Ohio www.ohioforest.org

** INFO LINK**

has been rebuilt, Contact: MARKit has a 24foot in Email: Mark@lumbermensco.com feed deck 20 foot out feed deck Phone: 888-401-6367 708 with 44 inch wheels, andEXT all the

702-875-2703 bells and whistles, its a production

Buncher S & W 125 Band Mill with Item ID: 14079 Caterpillar generator - Low hours Contact: on the mill,AUSTIN electronic computer Set Email: Austin@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702 ‘05 Transport Trailers Custom Log Pup Item ID: JW-538174 CARRIAGES & DRIVES

B. H. Payne .............................. 16

Cardinal HD Carriage Contact:2010 SAM Email: Sam@lumbermensco.com Carriages (Sawmill) - Cardinal Phone: 888-401-6367 EXT 7021 Carriage line it includes carriage M&F Gauge ............................. 28 with onboard log turners, carriage Meadows Mill, Inc. ................ 33 drive, hyd pac for carriage,

Baker ...................................... 5, 7

Menominee Saw ..................... 29

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

Brute Force Mfg. ..................... 31

carriage knees, husk including Item 13818 Midwest Sharpening..............Contact: 26 SAM ID: 48" bottom saw and 36" top saw Contact: Sam Email: Sam@lumbermensco.com Morbark ..................................... 9 Phone: 888-401-6367 EXTExt. 702 603 (888) 401-6367 Schutte Hammermill12 Multitek ...................................

B & B Mfg. ............................... 18

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36 CRD Metalworks .................... 25

Grinder Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper ............................ 40 Contact: Austin

Corley Mfg .............................. 32

Item ID: 13965

CW Mill-Hogzilla ................... 15

Ph: Electric (888) 401-6367 x703 20 Row ............................

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3 Hurst Boiler ............................. 14 Iron Bull ................................... 21 Kilgore Saw ............................. 22 Lignomat ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

John Deere 437E The Paul Bunyan Show ......... 39

Item ID: 9508 Thomas Industrial Controls .....is 10 (1K hrs) Clean machine, everything tight.

Owner is getting out of the logging business and Union loweringGrove paymentsSaw ASAP & Knife .. 2, 37

Universal Refiner ................... 23 Contact:Caterpillar JOE 2013 Email: Joe@lumbermensco.com WoodMizer ................................

Phone: 888-401-6367 EXT 709l 535C

801-362-2170 Item ID: 13868

 SELL YOUR EQUIPMENTContact: TODAY Sam ❘ 0  24/7 SUPPORT l§ TODAY SUPPORT

Ph: (888) 401-6367 x702

‘01 Benson 34’ End Dump cabinet with electronic Item ID: 14004 drives for sawyers cab, computer ‘05 CAT TK560 controls,

STACKING RAC

Ponsse Ergo Mag 64-knive Item ID: 7720 Source Grinder 12k frame hours, 2000 hours on new $30k Mercedes diesel engine, H73 head, head rotator just rebuilt, slewItem ID: 14007 ing system for crane rebuilt 2k hours ago, main pump resealed about 1kAustin hours ago, comes with set of tracks!

Contact: Currently working, buying newer. Call for more Pictures Ph: (888) 401-6367 x703

Contact: MARK Email: Mark@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 708 swing motor.

Has new jet fit I S73.663.7711 800.S48.6914 702-875-2703 system. This machine is loaded... ❘ has pro-heat (888) 401-MENS NO. 29 L! 401-MENS system for cold

weather start. Has fire suppression

L O G G I N G

Williams This skidder has John 4700 original hours and comes with a winch. Cab has heat & ac, tires are ext.

23.1 26.701 In excellent (888) 401-6367 condition!

BANDMILLS & HEADSAWS

wasn’t purchased or used until 2015 was a “leftover” under 1k hours, 8’ wide blade, backhoe, 3 Danckaert Band Resaw buckets 24”, 30”, 36” one owner- Roughly longer boom!

LIKE NEW on this machine since it 10 hours

in ve1y good condition, Cuts 130

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

Item ID:DIRECTOR 985 MARKETING

Item ID: 14158

machine, with air strain conveyers

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

ADVERTISING SALES

www.arkloggers.com Item ID: 14213

been used around a sawmill.

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at '11 John Deere 85D www.LumberMB\ISmagazine.com

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

John Deere 850J Dozer

'12 CAT 573C Feller Buncher

Right around 3500 hours, excellent condition, brand new undercarriage, sprockets, and rollers. Very well maintained. Call for more info!

with SC-57 head, just over 2400 hours, dry, tight, very well maintained, everything works and operates as it should.

Call for more info

Item ID: 14192

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

Item ID: 14193

'94 Barko 160 Knuckleboom Item ID: 14186

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632

Contact:MARK J Williams Contact: Email: Mark@lumbermensco.com Ph: (888) 401-6367 x701 Phone: 888-401-6367 EXT 708

702-875-2703

‘93 Barko 180B

Item ID: 14077 Contact: Austin ‘04 JCB 441 Wheel Ph: (888) 401-6367 Loader x703 Item ID: 13888

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘08 John Deere 335C Item ID: 14089

‘95 John Deere C6 Tree Farmer

L O G G I N G

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘99 Case 850G Long 13428 Victory Ln. // PO Box 124 ‘89 Timberjack 230A Track Dozer Item ID: 13909NY 13606 Adams Center,

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Item ID: 13885

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

off onto a conveyor. This is a very

well built processor. Item ID 13820.

“13 KMC 2500 Tack Skidder Item ID: 14078

Contact: AUSTIN ‘05 Gehl CTL 70 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Item ID: JW-986495

‘83 John Deere 4850

Contact: J Williams Ph: (888) 401-6367 x701

'09 John Deere 753J Buncher ID: 14106 chainItem conveyer, 8 way splitter, on

Item ID: 14073 Contact: Austin Contact:20,000lb AUSTINgoose neck trailer. Item ID Email: Austin@lumbermensco.com 13916. Austin x703 Ph: (888) 401-6367 x703 Phone: 888-401-6367 EXT 703 Best Value Portable Log Splitter

with 1700 hours, in very good

condition. Easily produces high

- Small manufacturer in PA has

made the best valued log splitter.

‘00 Timbco quality chips with patented ‘Cone’ Handles 445D logs up to 32”. Uses Item ID: 14096 drum design. Can easily load 42’ 13HP Honda motor. Manual start

Contact: AUSTIN vans and produce 6 - 8 loads per but electronic option is available.

Email: Austin@lumbermensco.com day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge Phone: 888-401-6367 EXT 703 EDGERS & GANGS adjustable to single two way. Great Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor 2015 Cat 525Dwith a 10’ ItemHas ID: a14167 log deck. hydraulic grapple,

Contact:chain AUSTIN 2010 Shop Built Wood Processor and kicker that all runs off - It has a 353 Detroit diesel, 40Email: Austin@lumbermensco.com of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 inch insert tooth circle saw, 30 foot unit. Has a 4’ chain saw that kicks  Issue 364 381

Lumbermens™  since 1986

❘

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Sam x702

‘09 John Deere Firewood Processor - This is 650J XLT

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID

‘95 Bell Ultra T

a Chomper Model PDA Item ID: 16 14091

automatice firewood processor Contact: AUSTIN Email: Austin@lumbermensco.com with John Deere power unit with Phone: 888-401-6367 EXT 703 low hours. Control panel includes

13238. Chris x700 Item ID: 14070

1995 BarkoAUSTIN 775 B Feller Buncher Contact: -Email: PumpsAustin@lumbermensco.com recently redone. 400 hrs Phone: 888-401-6367 EXT 703 on injection pump. always started

in good working order.III 22in tach, oil pressure, water temp and Johngood.

Deere 648G Series amp gauges. Cuts logs up to 16”.

kohing head.

Item ID:head 4351works great.

& transmission has been rebuilt.

Front and rear Item ID 13185.

Sam x702 ends have been gone thru. Cold air/heat works, radio but needs antenna!

Rear- new tires are NEW, front 1999 an Barko 160D engine with tires 70% tread.

One owner and comes with allMotor works manuals and receipts. Purchased

new for $32,500. Item ID 13865.

Sam x702

approximately 1500 hours. Hour

Contact: JOE Email: Joe@lumbermensco.com meter dont work. The last 2 owners Phone: 888-401-6367 EXT 709 OR 801-362-2170

LOGGING EQUIPMENT BANDIT

have only used it to load trucks or

as a backup as needed. Has a CTR

'92 CAT 518C Cable Skidder

delimber, has been rebuilt.

Itemgrapple ID: 14107 Boom cylinders have minor leaks.

Chipper - Cat Under Carriage at Hard to Find “C” model in great shape!

Item ID 13694. Sam x702 50% or better. 475 hp Cummins 1999 Bandit 1900 Tracked Disc

Contact: 94AUSTIN Barko 275 - Excellent value Diesel. 7500 Hours. One owner.

Email: Austin@lumbermensco.com with low at hours at 3,500. 5.9 Well maintained. Item ID 13294.

Phone: 888-401-6367 EXT 703 CUMMINS continuous grapple.

Sam x702 2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

Runs Great!. Item ID 13740. Sam

‘02 Jackson Shavings Mill x702 Item ID: 13736 BELL

Contact:1990 AUSTIN Bell Super T - This Bell has good condition. Just finished 10 Email: Austin@lumbermensco.com a brand new Duetz engine. Lever Acre clearing job, ready to work!

Phone: 888-401-6367 EXT 703 control, 33” bar, pump and tranny Remote control. Big production

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree

2010that Tigercat 724E Started

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

‘93 Barko 180B

it All!

Contact: AUSTIN Email: Austin@lumbermensco.com Since 1986, Lumbermens has Phone: 888-401-6367 EXT 703 published a monthly circular

Contact: AUSTIN Contact: AUSTIN 72NDEmail: ANNUAL GREAT LAKES Austin@lumbermensco.com Email: Austin@lumbermensco.com LOGGING & HEAVY EQUIPMENT Phone: 888-401-6367 EXTEXPO 703 Phone: 888-401-6367 EXT 703

Thurs, 7 Sept - Sat, 9 Sept

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Woods Publishing

MID-ATLANTIC

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

LOGGING & BIOMASS EXPO

& 4 in 1 bucket.

Selma, North Carolina www.midatlantic-logging-biomass­ Contact: AUSTIN Email: Austin@lumbermensco.com expo.com/ Phone: 888-401-6367 EXT 703 OR 931-797-8029

Sam Wall Item ID: 9737 (888) 401-6367 ext. 702John Deere 700J LGP (7K hrs) 6mo. ago a new head gasket, water alternator and sam@lumbermens.cobatteries have been put on. Undercarriage ispump, at 60-65%. 30" wide

Cambridge, Ohio www.ohioforest.org

** INFO LINK**

pads. Log arch and winch work great. Winch was barely used. A/C heat works well. Very good machine, no leaks, dry and ready to clear!

New front idlers, too. Only selling because too many payments for 703the use it's been made of.

Austin Woods (888) 401-6367 ext. austin@lumbermens.co

MAILING ADDRESS

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate700J machine JOHN DEERE Item ID: 2212 in ve1y good condition, Cuts 130 ('08) (4.5K hrs) One owner only, bought brand

one or two pins on the rail that needs fixing. $2.5-$4K, therefore the cheap price. All maintenance has Sbeen &W 125 Mill with done on Band time. Reason for selling is owner needs to lower his overall monthly payments.

Item x703 QuotesID we13876. receivedAustin range between

Caterpillar generator - Low hours

Contact: JOE on the mill, electronic computer Set Email: Joe@lumbermensco.com

works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 709

801-362-2170

Cat 3406 140KW Genset, 12,400 ready648G to run. Series Item ID 13434.

JOHNhours DEERE III Item ID: 746 Sam x702

CARRIAGES & DRIVES

Dual arch, tires tread 30%, 30.5 This was a repo from in Alabama.

A/C not working properly. Owner bought it from them and used it for about 18mo. Nothing wrong with it. Grapple needs new packing Cardinal HD Carriage ($600 fix). Good2010 skidder, reliable!

Contact: JOE Carriages (Sawmill) - Cardinal Email: Joe@lumbermensco.com Carriage EXT line709 it includes carriage Phone: 888-401-6367 OR 801-362-2170

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

with onboard log turners, carriage

Baker ......................................

5, 7 Item ID: 9450

drive, hyd pac2s for carriage, Kubota SVL-95 Item ID: 4861 Menominee Saw .....................This 29is in LIKE-NEW sawyers cab, computer controls, conditions. Only 420hrs. It’s currently on a small

Brute Force Mfg. ..................... 31

A/C - heat works.electronic It has the load sensing for closed with drives Metal Detector's Inc. ..............controls, 30 radio,cabinet center hydraulics with parallel loader control valve. Very tight machine. In addition to the diamond forestry mulching head, carriage knees, husk includingowner Midwest Sharpening.............. 26

Corley Mfg .............................. 32

Multitek ...................................Phone: 12 888-401-6367 EXT 709 OR 801-362-2170

TIMBERJACK 230A

Contact: AUSTIN Buck Equipment (AIM) ........ 36 Send address changes to: Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029 Lumberman's Exchange

P.O. Box 1916 Columbia, TN 38402

702-875-2703

feet a minute also has new in '08, undercarriage 60%.CLT Has anpresses. issue with

B & B Mfg. ............................... 18

May be sent to­ 1989 Model with Bell's Machining 27 factory 5.9 Cummins ..................... engine, power shift morris@lumbermens.co transmission, Hercules winch. Working daily.

POSTMASTER

bells and whistles, its a production that go up and down, with airbags,

Contact: AUSTIN THE PAUL BUNYAN SHOW Email: Austin@lumbermensco.com Phone: 888-401-6367 703 OR8931-797-8029 Fri, 6 OctEXT - Sun, Oct

EQUIPMENT REPS

Email: Mark@lumbermensco.com

with 44 inch wheels, and Phone: 888-401-6367 EXTall 708the

CRD Metalworks .................... 25 Item ID: 5627 The Lumberman's Exchange is (11K hrs) Ledgering CW Mill-ArmorHog ..............

17 system doesn’t work, trail wheel needs to be

Timbco 425

published monthly by Woods fixed. It does has new wiring and a new sensor. The undercarriage is at 40 with a 5.9 engine.

A/C - heat works! There's a computer glitch CW Mill-Hogzilla ...................

15 Publishing, P.O. Box 1916, (waiting to be fixed) where to tip the head back, you have to hit another function and then the head will move back.

The computer Columbia, TN 38402. All rightssystem has been checked and re-calibrated by Woodland Equipment Dyna Products ........................ 35 reserved. All editorial/ advertorial in (MI) 18mo. ago. It has a Risley processing head. submissions are used at the Contact: JOE Empire Hydraulics ................... 8 discretion of the publisher and Email: may Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170 be edited for purposes of clarity Great Lakes Mfg. .................... 34 and space. Although all efforts have Hahn Machinery ...................... 3 been made to ensure accuracy of Bell Ultra C content submitted by advertisers Hurst Boiler ............................. 14 Item ID: 1025 and writers, the Lumberman's Exchange, its principles and 1996 model with Joystick control and Koehring Iron Bull ................................... 21 associates, are not held liable for Head. errors or omissions. Reproduction, Kilgore Saw ............................. 22 Contact: AUSTIN in whole or part, is prohibited with­ Email: Austin@lumbermensco.com Lignomat ................................. 24 out written consent.

Phone: 888-401-6367 EXT 703 OR 931-797-8029 ©2017 Woods Publishing

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

job. Owner doesn’t need it any longer. It has high flow joystick

is including a blue diamond grapple and a bucket.

48" bottom saw and 36" top saw Contact: JOE Morbark .....................................

9 Email: Joe@lumbermensco.com

Piper's Saw Shop.................... 13 Rotochopper............................ 40 Row Electric ............................ 20 Sawmill Exchange .................. 11

STACKING RAC

Select Sawmill ......................... 19 Smith Sawmill ........................... 4 The Paul Bunyan Show ......... 39 Thomas Industrial Controls..... 10

16’ CAT 545D

Union Grove Saw Knife.. 2, 37 Item ID:& 14211 Universal Contact: Refiner AUSTIN................... 23 Email: Austin@lumbermensco.com WoodMizer ................................ l Phone: 888-401-6367 EXT 703

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

Timbco 445D Item ID: 1326

2001 model and is a 2 owner machine with 10000 frame hours, UC is at 40%, cab has heat & ac. New pumps, overall machine is mechanically sound.

Contact: AUSTIN Email: Austin@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 703 800.S48.6914 I S73.663.7711

931-797-8029 ❘ L!  (888) 401-MENS 401-MENS

NO. 31

L O G G I N G

Contact: AUSTIN DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 703

931-797-8029

Contact: feed deck MARK 20 foot out feed deck

Item ID: 6056& BIOMASS MID-ATLANTIC LOGGING Fri, 15 Sept - Sat,comes 16 Sept 2007 model with 5400 hours, with log forks,

Lexington, Kentucky Item ID: 7060 http://www.kfia.org/ 2007 model with 5634 original hours comes with KentuckyWoodExpo.aspx two year old 16’ bucksaw.

Item ID: 410

John Williams 95’ long frame with JD winch.ext.

Skidder is in excel(888)model 401-6367 701 lent condition. j@lumbermens.co

BANDMILLS & HEADSAWS

machine, with air strain conveyers

KENTUCKY WOOD EXPO Fri, 15PRENTICE Sept - Sat,2210 16 Sept

Timberjack 380C MARKETING DIRECTOR

Grapple Skidder Currently 6303 original hours!

Meter is working, comes with 28L tires at 85%(NOT TIRES IN PICS) 2 1/2 years ago the motor was overhauled by John Deere great winch, tight pins, dry Danckaert Band Resaw - Roughly machine no leaks, woods ready/working machine! maintenance done 250-300 hours paper work docu10 hours on this machine since it menting work from John Deere. Part time loggers selling only because recently got new equipment. has been rebuilt, it has a 24foot in

Escanaba, Michigan

CAT 928G

PUBLISHER

ADVERTISING SALES

07’ Tigercat 620C Hot Springs, Arkansas Item ID: 14248 www.arkloggers.com

Item ID: 14077

Item ID: 14247

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and JohnofDeere 648D at Location Itemall ID:equipment 14255 www.LumberMB\ISmagazine.com

Phone 315.284.4126 Fax Item ID: JW-093430 315.849.2045 Website Contact: SAM www.empirehyd.com Email:Email Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 info@empirehyd.com

‘04 Fabtek 344B

“Precision Under Pressure”

'97 CAT 525 Original Cable Skidder

L O G G I N G

Item ID: 9901

One Of A Kind. Has Never Pulled A Log. Owned By An Electric Company. Deal!

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Danchaert Band Resaw Item ID: JW-909632 Item ID: 13876 Contact: J Williams Contact: Ph: (888)AUSTIN 401-6367 x701

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘93 Barko 180B

Item ID: 14077 604 Tigercat Contact:Item Austin ID: 7436 Ph: (888) 401-6367 x703 Good rubber and less than 4000 hours, in excellent condition!

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

D5H TSK

Item ID: 7098 LOW Hours, Excellent Condition, Very Hard To Find Dozer.

‘95 John Deere C6 Tree Farmer

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 Item ID: 13920

Meadows #1 Complete Sawmill 13428 Victory Ln. // PO Box 124

‘06 CAT 517

Item ID: 13869 Adams Center, NY 13606 Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Item ID: 14069

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Item ID: 5461

Trim Saw - 12000 10 HP motor on cutoff blade, 5 HP motor on feed chain. Like new, less than 200 hrs

‘05 Gehl CTL 70 Contact: TED

Email: Teds@lumbermensco.com Item ID: Phone: 888-401-6367 EXTJW-986495 701 or (801) 319-9351

‘83 John Deere 4850

Contact: J Williams Ph: (888) 401-6367 x701

Brewer 9112 Gangsaw & 4004 Item ID: 18554 Notcher 3 phase Brewer Golden Eagle gangsaw double arbor, single rubber tire auto feed for cants, like new blades and sleeves spaces, washers are all likeon new. chain conveyer, 8 way splitter, Notcher infeed & outfeed with swing arm to push material to notcher, like new notcher, sawdust conveyer as well neck as sawdust ventilation, electrical 20,000lb goose trailer.

Item ID panel, ready to go unit! Call for more pictures!

Item ID: 14073 Contact: Austin 13916. Austin x703 Ph: (888) 401-6367 x703Contact: MARK

Email: Mark@lumbermensco.com Best Value Portable Log Phone: 888-401-6367 EXT 708 or 702-875-2703

Contact: Austin ‘13 KMC 2500 Track Ph: (888)Shingle 401-6367Mill x703 Desjardin Skidder Item ID: 1970

Item ID: 14078 Good shape. Bought it 30 yrs ago from another owner. It did not get much use. Only used it to make shingles for Contact: Austin capacity!. Item ID 13421. Sam x702 Ph: (888) 401-6367 x703 his home.

BARKO

Contact: TED Email: Teds@lumbermensco.com 1994 Barko - Electric Phone: 888-401-6367 EXT160B 701 or (801) 319-9351

off onto a conveyor. This is a very

knuckleboom, 30' boom, 75hp

Sam x702

grapple, 5,000 original hours.

well built processor. Item ID 13820.

Cutoff Trim Saw

S A W M I L L

‘16 Halverson H140 Skidsteer (DEMO)

Splitter

Firewood Processor - This is a Chomper Model 16 PDA

automatice firewood processor

kohing head. works great.

Cummins 275hp powerhead unit, sawdust conveyer with electric

model H360 35 HP motor Hydraulic Log Dog One owner comesProCut withsaw all blade Hydraulic Back and Stop Sterling 13Ft 11in 7/8 TS/ 1 1/4 PV 121 Peavy Hook

manuals and receipts. Purchased Contact: TED new forTeds@lumbermensco.com $32,500.

Item ID 13865.

Email: Phone: 888-401-6367 EXT 701 Sam x702 or (801) 319-9351

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

‘05 Woodmizer LT300 FIREWOOD PROCESSORS Item ID: 14031

2010 Shop Built Wood Processor Contact: AUSTIN - Email: It has aAustin@lumbermensco.com 353 Detroit diesel, 40 Phone: 888-401-6367 EXT 703 inch tooth circle saw, 30 foot insert931-797-8029  Issue 364 381

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

'16 LT40 Super Hydraulic

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a Item ID: 9903

homemade processor with a 10’ One Owner! 136 hours, Tons of log deck.

Has Priced a hydraulic grapple, Extra Parts. cheap! chain and kicker that all runs off Contact: SAM ofEmail: a 4 cylinder Mercedes power Sam@lumbermensco.com unit.

Has 888-401-6367 a 4’ chain saw that Phone: EXT kicks 702

Lumbermens™  since 1986

❘

1995 Barko 775 B Feller Buncher

amp gauges. up to 16”.

Hud-Son PortableCuts Sawmilllogs year 2016 1000 hours

Item ID: 8841temp and tach, oil pressure, water

quality chips with patented ‘Cone’ drum design. Can easily load 42’

13238. Chris x700

- Pumps recently redone. 400 hrs

- Small manufacturer in PA has

made the best valued log splitter.

(excellent condition.). Item ID

Hud-Son low hours.

Control panel includes 360 Portable Sawmill

with John Deere power unit with

with 1700 hours, in very good

condition. Easily produces high

motor, Rotobec continuous

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

Talon 900 Edger

2004 Bandit Beast Model Item ID: 69924680 -

3412 Caterpillar Diesel engine 2016 Timberking talon 900 3 blade edger, only 6 hours, $16,995.00 new, Gas engine 24.5 hp Koehler. Fully porwith 850 5300 Mill in table, like newHP. Call for more hrs. pictures.

good condition.

Just finished 10 Contact: MARK Email: Mark@lumbermensco.com Acre clearing job, ready to work!

Phone: 888-401-6367 EXT 708 Remote control.

Big production

702-875-2703

 List  seLL  exchange  buy  save

Meadows 2 Deluxe Sawmill

on injection pump. always started Item ID: 80412

good. inonboard goodcomputer, working order.

22in deluxe new hydraulic cab control, 3 saw

miner edger, dual chain for sawdust from edger, 6 cylinder motor, 24’ live log deck, comes with good 48” and 52” blades,

saw wrench, jockey grinder for teeth, chain log turnItem ID electric 13185.

Sam x702 er, mill is on wheels and is portable, 14,000 board foot sawed

in 9 hours with this160D mill!

1999 Barko - new engine with

Contact: MARK 1500 hours. Hour approximately Email: Mark@lumbermensco.com

Phone:dont 888-401-6367 EXT last 708 2 owners meter work. The

702-875-2703

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

3645D Bandmill Item ID: 5168 Runs Great!. Item ID 13740. Sam

2000 model Baker band mill, everything works and x702 runs good on it, Baker set works, has debarker, 45hp Kubota diesel engine, unsure on hours Call for more pictures!

BELL

1990 Bell Super T - This Bell has Contact: MARK aEmail: brandMark@lumbermensco.com new Duetz engine. Lever Phone: 888-401-6367 EXT 708 control, 33” bar, pump and tranny

702-875-2703 ❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

Precision Scragg Item ID: 3607

Precision Scragg, excellent condition, Themotor, Tree 40 hp twin saw 4,6,8,and 10 inches, canthat send Started video of it running, Va Area

it All!

Contact: TED Email: Teds@lumbermensco.com Since 1986, Lumbermens Phone: 888-401-6367 EXT 701has published or (801) 319-9351 a monthly circular

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

SOUTHWEST FOREST PRODUCTS EXPO '02 WoodMizer LT-40 Fri, 25 AugustItem - Sat,ID:2611345 August Hot Springs, Arkansas Kubota Diesel engine. www.arkloggers.com

Sanborn Scragg Mill Item ID: 14050

Contact: AUSTIN Contact: AUSTIN 72NDEmail: ANNUAL GREAT LAKES Austin@lumbermensco.com Email: Austin@lumbermensco.com LOGGING & HEAVY EQUIPMENT Phone: 888-401-6367 EXTEXPO 703 Phone: 888-401-6367 EXT 703

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

Edmiston Complete Sawmill Package MID-ATLANTIC LOGGING & BIOMASS Item ID: 14084

Woods Publishing

Contact: AUSTIN MID-ATLANTIC ADVERTISING SALES Email: Austin@lumbermensco.com LOGGING & BIOMASS EXPO Phone: 888-401-6367 EXT 703

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Fri, 15 Sept - Sat, 16 Sept

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

Item ID: 14118

John Williams (888) 401-6367 ext. 701Has the Kubota Diesel Motor! j@lumbermens.co

Contact: AUSTIN

DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger

Phone: 888-401-6367 EXT 703

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 7021998 Timber sam@lumbermens.co Bandmill

Lexington, Kentucky LT70 ‘06 Woodmizer http://www.kfia.org/ Electric KentuckyWoodExpo.aspx Item ID: 14076

AUSTIN THE Contact: PAUL BUNYAN SHOW Email: Austin@lumbermensco.com Fri,Phone: 6 Oct888-401-6367 - Sun, 8 OctEXT 703

Harvester 30HT25

Cambridge, Ohio www.ohioforest.org

Item ID: 32925

** INFO LINK**

Timber harvester 25ht30 can cut 30” diameter 21’ long logs, 35hp gas motor, mill is totally hydraulic, new battery, 16 New blades, comes 703with owners manual and maintenance records. Call for more pictures!

Austin Woods (888) 401-6367 ext. austin@lumbermens.co

MAILING ADDRESS

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

B & B Mfg. ............................... 18 P.O. Box 1916 Columbia, TN 38402-1916 H. Payne .............................. 16 (888) 401-6367 PrecisionB.Scragg Item ID: 3607

Baker ...................................... 5, 7 AD SUBMISSIONS Excellent condition, 40 hp twin saw motor. The saw motors are 40HP 1780 RPM currently wired for 480v.—-spinning May be sent to­ Lincoln Bell's .....................

36 inch F pattern circle Machining saws. The hydraulic power pack is27 a

10Hp motor also 480V. Scragg will handle 12 foot and up to 14 morris@lumbermens.co

POSTMASTER

inches in diameter easy. Scragg in great shape. has been run Brute Mfg. ..................... 31 very little. Can send videoForce on request.

Send address changes to: Contact: TEDBuck Equipment (AIM) ........ 36 Email: Teds@lumbermensco.com Lumberman's Exchange Phone: 888-401-6367 EXT 701 or (801) 319-9351 32 Corley Mfg ..............................

P.O. Box 1916 Columbia, TN 38402 CRD Metalworks .................... 25

Frick #1 Jumbo Mill

The Lumberman's Exchange is ID: 200 CW Item Mill-ArmorHog .............. 17 published monthly by Woods Complete operation that includes ................... a meadows CW Mill-Hogzilla 15 Publishing, P.O. Box 1916, edger, HMC V206 Debarker, 48” Chipper, blower, live decks, and many other spare parts.

Columbia, TN 38402. All rights Dyna Products ........................ 35 reserved. All editorial/ advertorial Contact: AUSTIN submissions are used at the Empire Hydraulics ................... 8 Email: Austin@lumbermensco.com discretion of the publisher and Phone: may 888-401-6367 EXT 703 OR 931-797-8029 be edited for purposes of clarity Great Lakes Mfg. .................... 34 and space. Although all efforts have Hahn ...................... been made to ensure accuracy of Quality 4 Machinery Head Trim Saw 3 content submitted by advertisers Item ID: 1559 Hurst Boiler ............................. 14 and writers, the Lumberman's Exchange, its principles and Ready to run, operates from either end, Va Area Iron Bull ................................... 21 associates, are not held liable for errors or omissions. Reproduction, Contact: TED Kilgore Saw ............................. 22 Email: Teds@lumbermensco.com in whole or part, is prohibited with­ Phone: 888-401-6367 EXT 701 Lignomat .................................

24 out written consent.

or (801) 319-9351 ©2017 Woods Publishing

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

M&F Gauge ............................. 28 Meadows Mill, Inc. ................ 33 Menominee Saw ..................... 29

Corley Complete Sawmill Metal Detector's Inc. ..............

30 Item ID: 14035 Midwest Sharpening.............. 26 Contact: AUSTIN Mor bark ..................................... 9 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Multitek ................................... 12 Piper's Saw Shop.................... 13 Rotochopper............................ 40 Row Electric ............................ 20 Sawmill Exchange .................. 11

'11-'12 Helle Sawmill Item ID: BANDMILLS & 14119 HEADSAWS

Danckaert Bandhydraulic Resaw -head Roughly 56” auto carriage control cab, vertical saw edger log turner, 10 hours on2 this machine since5itlog stop and load deck, 60’ long track. has been rebuilt, it has a 24foot in Contact: MARK feed deck 20 foot out feed deck Email: Mark@lumbermensco.com with 44 inch wheels, andEXT all the Phone: 888-401-6367 708 bells and 702-875-2703 whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703

‘14 Hurdle 3-HD

S & W 125 Band Sawmill Mill with Block Item ID: 13997 Caterpillar generator - Low hours on the mill,AUSTIN electronic computer Set Contact: Email: Austin@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls,

‘13 Woodmizer 4000drives Sawmill cabinet with electronic for Item ID: 14000 carriage knees, husk including Contact: 48" bottomAUSTIN saw and 36" top saw Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

STACKING RAC

Select Sawmill ......................... 19 Smith Sawmill ........................... 4 The Paul Bunyan Show ......... 39 Thomas Industrial Controls..... 10

LT40 Union Wood-Mizer Grove Saw & Knife .. 2, 37 Item ID: 13995 Universal Refiner ................... 23 Contact: AUSTIN Email: Austin@lumbermensco.com WoodMizer ................................ l Phone: 888-401-6367 EXT 703

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

Hurdle #2 Sawmill Item ID: 8720

2016 Complete sawmill package, includes precision chip pack, 80ft vibrating conveyer, HMC Debarker, Morgan Slab edger, 3 strand log deck, and more.

Contact: AUSTIN Email: Austin@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 703 800.S48.6914 I S73.663.7711

931-797-8029 ❘ L!  (888) 401-MENS 401-MENS

NO. 33

S A W M I L L

MARKETING DIRECTOR'02 Woodmizer LT-40 Super HD

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

Woodmizer LT40 Sawmill

“Precision Under Pressure”

Phone 315.284.4126Item ID: 14227 Fax 2010 Woodmizer lt40 2250 hours 28 hp koeler v-twin gas 315.849.2045 engineWebsite extender arms simple setworks hydraulic deck all lever controlled low hours www.empirehyd.com Email Contact: MARK info@empirehyd.com

Item ID: 13956

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

Woodmizer Twin Blade Diesel Edger Item ID: 14191

S A W M I L L

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘93 Barko 180B

‘16 Halverson H140HudSonItem ID: Portable 14077 Sawmill H360 Contact: Austin Item ID: 8841 Skidsteer (DEMO)

Ph: (888) 401-6367 x703 2016, 1000 Hours, 35HP Motor, Hydraulic Log Dog, Item ID: JW-909632 Hydraulic Back Stop, ProCut Saw Blade 13FT 11in 7/8, TS 1 1/4 PV 121 Peavy Hook, KY area Contact: J Williams Ph: (888) 401-6367 x701Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

03’ Woodmizer LT-300 Operation Item ID: 14171

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘06 Brewco B1600 Resaw Item ID: 13862

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606 Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

1996 Jackson Shavings Mill Item ID: 1271

‘05 Gehl CTL 70

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXTJW-986495 703 OR 931-797-8029 Item ID:

Contact: J Williams Ph: (888) 401-6367 x701

‘83 John Deere 4850

2005 Peerless 45’ Walking Floor Trailer Item ID: 83112

chain conveyer, 8 way splitter, on Item ID: 14073 slats on the very end are knicked up a bit, breaks good, tires decent, overall good condition, 96” wide.Item Call ID for 20,000lb goose neck trailer.

Contact: Austin more pictures!

13916. Austin x703 Ph: (888) 401-6367 x703Contact: MARK peerless 45’ walking floor, refurbished, dot tagged, couple

with 1700 hours, in very good

Email: Mark@lumbermensco.com Best Value Log Splitter Phone: 888-401-6367 EXTPortable 708 or 702-875-2703

condition. Easily produces high

quality chips with patented ‘Cone’

- Small manufacturer in PA has

made the best valued log splitter.

Risley Rolly 2 head Item ID:up765 Handles logs to 32”. Uses

5yrs ago, taken off a TimbcoManual 425D (‘13). start Unused drum design. Can easily load(‘13) 42’ Bought new 13HP Honda motor. for about 1 year. It has an updated woodland computer, all cables and hook-ups come with it. Excellent conditions. Nothing needed vans and produce 6 - 8 loads per but electronic option is available. and ready to work!

day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge Contact: JOE

EDGERS & GANGS

Email: Joe@lumbermensco.com adjustableEXT to709 single two way. Great Phone: 888-401-6367 OR 801-362-2170

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

MACK CH613

homemade processor Item ID: 46668 with a 10’ (‘02) (330K miles) Engine is a MACK E7-427 w/an Eaton PROCESSORS log deck.

Has a hydraulic grapple,

Fuller 10 speed manual transmission. Steel dump box. All invoices be provided for work doneoff on it.

2010 Shop Built Wood Processor chaincan and kicker that all runs

- It has a 353 Detroit diesel, 40Contact: JOE of a 4 cylinder Mercedes power

inch insert tooth circle saw, 30Email: foot Joe@lumbermensco.com unit. Has EXT a 4’709 chain saw that kicks Phone: 888-401-6367 OR 801-362-2170  Issue 364 381

Lumbermens™  since 1986

❘

‘95 John Deere C6 Tree Farmer

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703Saw Cornell Double End Trim

‘13 KMC 2500 Track Skidder Item ID: 14078 Meadows #2 Deluxe Contact: Austin Item ID: 14250 Ph: (888) 401-6367 x703

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: off onto a888-401-6367 conveyor. ThisEXT is a703 very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

Model 30D6

MISCELLANEOUS

‘08 Timberking B20

Item ID: 6307

1995 model with automatic setworks, variable speed feed & hydraulic conveyer.

capacity!. Item ID 13421. Sam x702 Contact: AUSTIN BARKO Email: Austin@lumbermensco.com Phone: 888-401-6367 1994 Barko 160B - ElectricEXT 703

931-797-8029 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Woodmizer LT300 grapple, 5,000 original hours.

Item ID: 14278 (excellent condition.). Item ID

Call for info!

13238. Chris x700 Contact: MARK 1995 Barko 775 B Feller Buncher automatice firewood processorEmail: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 -702-875-2703 Pumps recently redone. 400 hrs with John Deere power unit with

a Chomper Model 16 PDA

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

on injection pump. always started

good. in6good order. 22in Inline CATworking 200 KW Item ID: head 44131 kohing head. works great.

Item ID 13185.

Sam x702 One owner and comes with all Unit has 200 original hours.

1999 Barko 160D - new engine with manuals and receipts. Purchased Contact: TED Email: Teds@lumbermensco.com approximately new for $32,500. Item ID 13865.

Phone: 888-401-6367 EXT1500 701 hours. Hour

Sam x702

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

642 Morbark Debarker Sam x702 Item ID: 20033 2004 Bandit Beast Model 4680 -

one owner great condition, completely rebuilt 6 months, like new sawdust conveyor 30’ infeed, 3412 Caterpillar Diesel new drive motors, rebuilt pumps,engine new electric motor, new belts, new bearings. Selling because just bought850 brand new5300 Cleerman with HP. hrs. debarker.

Mill in Call for video!

good condition. Just finished 10 Contact: MARK Acre clearing job, ready to work!

Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 Remote control. Big production

702-875-2703

 List  seLL  exchange  buy  save

ormeter (801) 319-9351 dont work. The last 2 owners

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

Freightliner 1990 with low at hours at 3,500.

5.9 Item ID: 1990 CUMMINS continuous grapple.

MILES-322,470 motor with Runs Great!. CUMMINS Item ID 13740.

SamJake brake 9 speed Eaton fuller Air ride over

spring suspension 11.22.5 fair tires 15’ 10” x702 of frame from cab back Had A.C. but doesn’t work. Originally had a water tank on it.

BELL

1990 Bell Super T - This Bell has Contact: TED aEmail: brandTeds@lumbermensco.com new Duetz engine. Lever Phone: 888-401-6367 EXT 701 control, 33” pump and tranny

orbar, (801) 319-9351 ❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

2007 Morbark Chipper

Desjardin Shingle Machine Item ID: 1970

The Tree PTO driven, Blade 37 1/2, runs that Started great Massachusetts Area it All! Contact: TED Email: Teds@lumbermensco.com Since 1986, Lumbermens Phone: 888-401-6367 EXT 701has published or (801) 319-9351 a monthly circular

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

Item ID: 9658 Precision Chipper SOUTHWEST FOREST PRODUCTS EXPO Item ID: 4524

Fri, 25 August - Sat, 26 August model 22.

Everything works like it should... to go to work!

Hot Springs,Ready Arkansas www.arkloggers.com

66 inch ReBuilt Precision Chipper good shape

Contact: WALKER Email: Walker@lumbermensco.com Contact: TED 72ND ANNUAL GREAT LAKES Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 707 Phone: 888-401-6367 EXT 701 LOGGING & HEAVY EQUIPMENT EXPO or 931-797-3915

or (801) 319-9351

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

'08 Dynamic Chipper Item ID: 14196

MID-ATLANTIC LOGGING & BIOMASS 2008 conehead dynamic chipper model 585 1762 hours great Fri, 15 Sept - Sat, 16 Sept condition 500 hp john deere comes with $2k worth of new knives

MID-ATLANTIC MARK ADVERTISING SALES Contact: LOGGING & BIOMASS EXPO Email: Mark@lumbermensco.com

Morris Woods Phone: 888-401-6367 EXT 708 or 702-875-2703 (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR '99 Peterbilt Road Tractor

KENTUCKY WOOD EXPO Cut -Off Saw Fri, 15 Sept Sat,Trim 16 Sept

ID: 5461 Lexington,Item Kentucky http://www.kfia.org/ 10 HP motor on cut off blade, 5 HP KentuckyWoodExpo.aspx motor on feed chain, Good Condition.

John Williams Item ID: 14188 (888) 401-6367 ext. 701 j@lumbermens.co Contact: AUSTIN

DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger

Phone: 888-401-6367 EXT 703

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 Morbark Chipper (888) 401-6367

Item ID: 80356

AD SUBMISSIONS

Contact: TED

THE Email: PAULTeds@lumbermensco.com BUNYAN SHOW Phone: 888-401-6367 EXT 701 Fri, 6 Oct or - Sun, 8 Oct (801) 319-9351

** INFO LINK** B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16 Item ID: 28802 Baker ...................................... 5, 7

Meadows Mill, Inc. ................ 33

855 Cummings 350 KW

Morbark 58” LIKE NEW

Menominee SawID: .....................

29 Item 6114

Totally rebuilt 58 inch real May by be pro. sent to­ clean nice piece.

855 Cummings 350kw gen set enclosed with belly tank. 300 original hours since new.

Bell's Machining ..................... 27 Other generators available.

Metal . ..............

30 2 vibratingDetector's conveyer, it is aInc 2017 model with only

Contact: TED POSTMASTER Email: Teds@lumbermensco.com Send address changes to: Phone: 888-401-6367 EXT 701 Lumberman's Exchange

or (801) 319-9351

Brute Force Mfg. ..................... 31 Contact: TED Email: Buck Teds@lumbermensco.com Equipment (AIM) ........ 36 Phone: 888-401-6367 EXT 701 Corley Mfg or (801) 319-9351 ..............................

32

Midwest Sharpening.............. 26 Contact: AUSTIN Mor bark ..................................... 9 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Multitek ...................................

12

931-797-8029

morris@lumbermens.co

P.O. Box 1916 Columbia, TN 38402

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have CAT 3412 - 600KW Prime been made to ensure accuracy of Item ID:by 85729 content submitted advertisers and writers, the Lumberman's Has 233 original hours & 1 hour running time on Exchange, its principles andWill do load new sleeves, pistons, & bearings. associates, are not held liable for test before loading. errors or omissions. Reproduction, Contact: in whole TED or part, is prohibited with­ Email: Teds@lumbermensco.com out written consent. EXT 701 Phone: 888-401-6367

or©2017 (801) 319-9351 Woods Publishing

This chipper comes equipped with chip pack and 20’ hours on it! In like new condition!

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

CAT D349 Gen 2 Great Lakes Mfg. .................... 34

Item ID: 227 Hahn Machinery ...................... 3

Marathon Generator 208-220-230-240V, 480V transfer box, includes control panel, Hurstsafeties, Boiler .............................

14 engine governor, dual electric starter, 750KW/60HZ, 887KVA, load tested/ serviced, 940 ................................... original hours, 1100hp diesel.

Iron Bull 21 Several other generators also available

Kilgore Saw ............................. 22

Contact: TED Email: Teds@lumbermensco.com Lignomat .................................

24 Phone: 888-401-6367 EXT 701

or (801) 319-9351

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Smith Sawmill ........................... 4 The Paul Bunyan Show Blockbuster 1412.........

Plus39 Item ID: 958 Thomas Industrial Controls..... 10

2015 model with PLUS package and only 50 hours on it.

Comes with 8 way and 6 was& splitting head.

Machine Union Grove Saw Knife .. 2, 37 is in like new condition.

Universal Contact:Refiner AUSTIN................... 23 Email: Austin@lumbermensco.com WoodMizer ................................

Phone: 888-401-6367 EXT 703l

931-797-8029

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly Multitek 2025 Processor Item ID: 4501 since it 10 hours on this machine

2002 been model located in Ohioit has a 24foot in has rebuilt,

feed deck 20 foot out feed deck Contact: AUSTIN Email: Austin@lumbermensco.com with 44 inch wheels, andEXT all the Phone: 888-401-6367 703

931-797-8029 bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine

in ve1y'93 good condition, Cuts 130 KW 425 CAT Item ID:13342 feet a minute also has CLT presses.

Item 13876.

Austin x703Inframe withIDten speed 220 twenty four feet of frame beS & W 125 Band Mill with hind the cab Caterpillar generator - Low hours on the mill,WALKER electronic computer Set Contact: Email: Walker@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 707 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hydMiner pac for carriage, Edger

Item ID: 14228 sawyers cab, computer controls, Miner 3 blade edger with brand new 3 phasefor motor cabinet with electronic drives brand new mandrel and Cummins 4B39 generator

carriage knees, husk including Contact: MARK 48" bottom saw and 36" top saw Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708

702-875-2703

STACKING RAC Kenworth T800 Item ID: 6755

(44K miles) It's got a HOOD 7000 extended boom on it, still with manufacture warranty. The boom has been on it for a year. Being used everyday. 2 years only of life.

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 www.BakerProducts.net 800.S48.6914 801-362-2170 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 35

M I S C E L L A N E O U S

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

new drum with about 6o hours inch thick heavy duty skin

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

1990 Freightliner Item ID: 7422

'10 Woodsman 440 Whole Tree Chipper Item ID: 14105

3,000 original hours.

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘16 Halverson H140 Skidsteer (DEMO)

Cummins motor w/Jake Brake, 9 speed Eaton Fuller, Air Ride over spring suspension, 11.22.5 fair tires, 15'10" of frame from cab back, has A/C but not Item ID: JW-909632 working, 322,470 miles

Western Star Heavy Haul Item ID: 14093

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Contact: J Williams Contact: TED Ph: (888) 401-6367 x701 Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701

or (801) 319-9351

‘93 Barko 180B

Item ID: 14077 Contact: Austin AM General M818 Army Truck Ph: (888) 401-6367 x703 Item ID: 14576

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

‘04 Takeuchi TLN140

M I S C E L L A N E O U S

Item ID: JW-880805

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘13 KMC 2500 Track Skidder

Shop Built Firewood Processor 13428 Victory Ln. // PO Box 124

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

Item ID: 13994NY 13606 Adams Center,

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

off onto a conveyor. This is a very

Kenworth T800 Log Truck & Loader

well built processor. Item ID 13820.

‘06 Cord King Model 60

Sam x702 Item ID: 6006 Firewood Processor - This 1994 model with 1998 Grizzly 215c loader.is15000 Miles

‘05 Gehl CTL 70 Contact: AUSTIN

automatice firewood processor Contact: AUSTIN

Item ID: 14068

‘83 John Deere Shop Built Wood 4850 Processor

Item ID: 14073 Item ID: 14038 Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 with 1700 hours, in very good condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item"Like ID 13644.

Sam x702 New" Tajfun

Firewood Processor FIREWOOD PROCESSORS

Item ID: 14249 2010 Shop Built Wood Processor AUSTIN -Contact: It has a 353 Detroit diesel, 40 Email: Austin@lumbermensco.com inch insert tooth circle saw, 30 foot Phone: 888-401-6367 EXT 703  Issue 364 381

Email: ID: Austin@lumbermensco.com Item JW-986495 Phone: 888-401-6367 Contact: J Williams EXT 703 Ph: (888) 401-6367 x701

on fresh engine overhaul. 600,000 frame miles. Work

aready Chomper Model 16 PDA setup!

Email: Austin@lumbermensco.com

with John Deere power unit with Phone: 888-401-6367 EXT 703

931-797-8029

low hours. Control panel includes

tach, oilLumber pressure, water temp and 02’ Jackson Harvester Item ID:Cuts 1187 amp gauges. logs up to 16”.

chain conveyer, 8 way splitter,Model on 20,000lb goose neck trailer.

13916. Austin x703

Best Value Portable Log

One owner and comes 30D10, entire operation includes with knife all grinder, 30ft leg dust collector, two cilos, open top trailers, dust Item ID manuals and receipts.

Purchased collector, blower unit, and Bagger. One owner machine new for $32,500. Item ID 13865.

Contact: AUSTIN Email: Austin@lumbermensco.com Splitter Sam x702 Phone: 888-401-6367 EXT 703 OR 931-797-8029

- Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

LOGGING EQUIPMENT BANDIT 1999 Bandit 1900 Disc ‘83 InternationalTracked S-Series

Item ID: Under 14080Carriage at 13HP Honda motor. Manual start Chipper - Cat Contact:50% AUSTIN but electronic option is available. or better. 475 hp Cummins Email: Austin@lumbermensco.com Diesel.

7500 Hours.

One owner.

Has Log Lift. Uses 4-way wedge Phone: 888-401-6367 EXT 703 adjustable to single two way. Great Well maintained. Item ID 13294.

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Sam x702

2004 Bandit Beast Model 4680 -

3412 Caterpillar Diesel engine homemade processor with a 10’‘06 Western Star Michigan Special ID:5300 14011 with Item 850 HP. hrs. Mill in log deck. Has a hydraulic grapple, chain and kicker that all runs off condition. Just finished 10 Contact:good AUSTIN Email: Austin@lumbermensco.com Acre clearing job, ready to work! of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 Remote control. Big production unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

 List  seLL  exchange  buy  save

‘95 John Deere C6 Tree Farmer Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

‘15 Cord King M44

ID:13421.

13961Sam x702 capacity!.Item Item ID

BARKO Contact: AUSTIN Email: Austin@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 703 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

Morbark 40/36

good. in good working order. 22in Item ID: 647 kohing head. head works great.

It has a CAT engine (755hp) with a sloped live

floor and top feedwheel.

Brand new clutch Item IDlarge 13185.

Sam x702 installed. Ready to work!!!

1999 Barko 160D - new engine with Contact: JOE approximately 1500 hours. Hour Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 meter dont work. The last 2 owners

801-362-2170 have only used it to load trucks or as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL 3 Strand Log Deck

Item ID: 14095 1990 Bell Super T - This Bell has

AUSTIN aContact: brand new Duetz engine. Lever Email: Austin@lumbermensco.com control, 33” bar, pump and tranny Phone: 888-401-6367 EXT 703 ❘

 LumbermensCO.com

** CALENDAR** GMC LOG TRUCK Item ID: 5037

1995 model with new 6 liter engine with 60000 miles on it, good tires, has split 5 gear transmission.

NY STATE WOODSMEN'S FIELD DAYS Contact: Fri, 18AUSTIN August - Sun, 20 August Email: Austin@lumbermensco.com Boonville, New York Phone: 888-401-6367 EXT 703 OR 931-797-8029

www.starwebhosting.net/woodsmen/

'99 International 4700 Chip Truck

SOUTHWEST FOREST PRODUCTS EXPO 1995 Pendu Fri, 25 August - Sat,Stacker 26 August Item ID: 1267

Item ID:Tree 14116 The

Hot Springs, Arkansas Contact: TED www.arkloggers.com

that Started Only 71,697 Miles.

Email: Teds@lumbermensco.com Phone: EXT 701 72ND888-401-6367 ANNUAL GREAT LAKES

or 319-9351 LOGGING & (801) HEAVY EQUIPMENT EXPO

it All!

Contact: AUSTIN Email: Austin@lumbermensco.com Since 1986, Lumbermens has Phone: 888-401-6367 EXT 703 published a monthly circular

Thurs, 7 Sept - Sat, 9 Sept

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

Item ID: 4268& BIOMASS MID-ATLANTIC LOGGING Fri, 15 Sept - Sat,in16good Sept Log trailer with 4 bolsters conditions.

Woods Publishing Morris WoodsTRAILER 25' LOG PUP 4 BUNKS

MID-ATLANTIC

LOGGING & BIOMASS EXPO

(888) 401-6367 ext. 704 Item ID: 8062 morris@lumbermens.co

2006 modelhttp://www.kfia.org/ with Mack 410Hp engine, Eaton fuller 10 speed transmission, 44k reads on camelback suspension, KentuckyWoodExpo.aspx 744,000 frame Miles. Brand new tires! Road ready!

Email: Joe@lumbermensco.com DESIGN DIRECTOR Phone: 888-401-6367 EXT 709 Donna Heninger

801-362-2170

Contact: AUSTIN THE PAUL BUNYAN SHOW Email: Austin@lumbermensco.com Phone: 888-401-6367 703 OR8931-797-8029 Fri, 6 OctEXT - Sun, Oct

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 '91 Fuel Harvester Columbia, TN 38402-1916 Tub Grinder (888) 401-6367

Item ID: 14112

AD SUBMISSIONS

3406 CatMay engine and to­ 4424 total be sent machine hours. morris@lumbermens.co

POSTMASTER Contact: AUSTIN Send address changes to: Email: Austin@lumbermensco.com Lumberman's Exchange Phone: 888-401-6367 EXT 703 P.O. Box 1916 Columbia, TN 38402

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have Truck been359 madePeterbilt to ensure accuracy of Item ID: content submitted by7841 advertisers andmodel writers, the Lumberman's 1987 with 600,000 Miles. Has 400 Cummins engine, air ride suspension, 40 rears, and and all new drive Exchange, its principles tires.

Can be soldare with not or without log trailer associates, helda Pitts liable for errors or omissions. Reproduction, Contact: AUSTIN in whole or part, is prohibited with­ Email: Austin@lumbermensco.com out written consent.

Phone: 888-401-6367 EXT 703

931-797-8029 ©2017 Woods Publishing

** INFO LINK**

10 hours this machine since it Sun 4 on Bolster Log Trailer

Item ID: 8256 has been rebuilt, it has a 24foot in

feed deck 20 foot out feed deck Contact: AUSTIN Email: Austin@lumbermensco.com with 44 inch wheels, andEXT all the Phone: 888-401-6367 703

931-797-8029 bells and whistles, its a production that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130

Item ID: 761 Lexington, Kentucky

(888) 401-6367 ext. 701 j@lumbermens.co Contact: JOE

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Ready toSelma, GO! North Carolina Contact: JOE www.midatlantic-logging-biomass­ Email: Joe@lumbermensco.com expo.com/ Phone: 888-401-6367 EXT 709 OR 801-362-2170

KENTUCKY WOOD EXPO Fri, 15MACK Sept -CHN613 Sat, 16 Sept

It has all new wiring, LED lights, air pin lock, turn table MARKETING DIRECTOR super tight with a 25' long bed.

Those 4 bunks are in new conditions. Rear brakes are almost ready to be reJohn Williams placed. Good trailer, work-ready!

Danckaert Band Resaw - Roughly

feetAspen a minuteBrush also hasChipper CLT presses.

Item ID: 14270 Item ID 13876. Austin x703

inline 6 cylinder ford engine, 3165 hours, runs good,

to work, and wheels new, handles up to Sready &W 125tires Band Milllike with 4" diameter brush, automatic feed

Caterpillar generator - Low hours Contact: MARK on the mill, electronic computer Set Email: Mark@lumbermensco.com Phone:1/2" 888-401-6367 works,1 or 2" band,EXT 22ft.708 track

702-875-2703 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

94’ Mack with Prentice 120 Sam x702 Item ID: 14215

CARRIAGES & DRIVES

B. H. Payne .............................. 16

Contact:2010 AUSTIN Cardinal HD Carriage Email: Austin@lumbermensco.com (Sawmill) - Cardinal Phone: Carriages 888-401-6367 EXT 703 Carriage line it includes carriage M&F Gauge ............................. 28 with onboard log turners, carriage Meadows Mill, Inc. ................ 33 drive, hyd pac for carriage,

Baker ...................................... 5, 7

Menominee Saw ..................... 29

Kenworth Road Tractor Truck Bell's Machining .....................

27

sawyers cab, computer controls,

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Midwest Sharpening.............. 26

carriage knees, husk including

B & B Mfg. ............................... 18

Item ID: 14092 Brute Force Mfg. ..................... 31 Contact: AUSTIN Buck Austin@lumbermensco.com Equipment (AIM) ........ 36 Email: Phone: 888-401-6367 EXT 703 Corley Mfg .............................. 32

Morbark ..................................... 9 Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17 CW Mill-Hogzilla ................... 15

Rotochopper............................ 40 Precision lower pipe Row Electric Brand new ............................ 20

Dyna Products ........................ 35

Sawmill .................. 11 Contact:Exchange TED

Empire Hydraulics ................... 8

Select Sawmill .........................

Phone: 888-401-6367 EXT 701 19

Great Lakes MfgLog . ....................

Kenworth Truck 34

Smith Sawmill ........................... 4

Precision Lower Pipe

Email: Teds@lumbermensco.com

or (801) 319-9351

Item ID: 4849 Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

1990 model Boiler with 300,000 original miles. Has 444 CumHurst .............................

14 mins engine, 15 speed transmission, 46 rears. Recently had new head, pistons, rings, and New steer tires inIron Bull ................................... 21 stalled. Can be sold with or without a Pitts log trailer.

Thomas Industrial Controls..... 10

Kilgore Saw ............................. 22 Contact: AUSTIN Email: Austin@lumbermensco.com Lignomat .................................

Phone: 888-401-6367 EXT 70324

931-797-8029

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

48" bottom saw and 36" top saw

2011 Dynamic Horizontal Grinder

STACKING RAC

1000 hrs, 425 hp Volvo Engine, Transfuild Clutch, Remote Control, Rev Fan, 25ft Stacking conveyor, Fix hammer Va. area Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701

or (801) 319-9351

Mack Log Truck

Item ID: 14087 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Universal Refiner ...................Email: 23 Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net WoodMizer ................................ l 800.S48.6914 I S73.663.7711

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 37

M I S C E L L A N E O U S

ADVERTISING SALES

BANDMILLS & HEADSAWS

machine, with air strain conveyers

4 BUNK TRAILER

PUBLISHER

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

“Precision Under Pressure”

A D D I R EC TO RY

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Anson...............................................2.............................800-663-7723 B & B Mfg.......................................27...........................800-654-5320 B. H. Payne.....................................13..........................404-761-8711 Baker................................................6, 9........................800-548-6914

‘93 Barko8180B Bartlett Saw Service & Supply....19...........................

00-566-0319 ‘16 Halverson H140 Item ID: 14077 Bell's Machining............................25..........................888-995-1965 Contact: Austin Skidsteer (DEMO) Ben Jones Machinery...................3.............................800-241-8983 Ph: (888) 401-6367 x703 Item ID: JW-909632 Blockbuster Inc..............................12..........................888-775-4883 Contact: J Williams Buck Equipment (AIM). ................15...........................800-803-3365 Ph: (888) 401-6367 x701 Corley Mfg......................................12...........................423-698-0284 CRD Metalworks...........................39...........................888-667-8580 CW Mill, DynaHog........................1.............................800-743-3491 F&R Manufacturing......................21...........................800-355-1250 Great Lakes Mfg............................13...........................877-248-5677

‘95 John Deere C6 Tree Farmer

Hurst Boiler....................................17...........................877-774-8778 Kilgore Saw.....................................13...........................888-857-5153 Item ID: 13920 Klug 800-471-5060 Contact: Austin ‘13 Korners..................................15...........................

KMC 2500 Track Ph: (888) 401-6367 x703 Lignomat.........................................15..........................800-227-2105

Skidder

Menominee Saw............................15...........................800-582-0470 Item ID: 14078 Contact: Austin Inc......................29..........................541-345-7454 Metal Detectors capacity!. Item ID 13421. Sam x702 Ph: (888) 401-6367 x703 Midwest Sharpening ...................10...........................231-924-5953

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

BARKO

,-soo-211-94&8

1994 Barko 160B - 8Electric Multitek...........................................23...........................

00-243-5438

knuckleboom, 30' 8 boom, 75hp off onto a Automation, conveyor. This Inc. is a very Pantron ...........38...........................

00-211-9468 motor, Rotobec continuous well builtSaw processor.

Item ID 13820.

Piper’s Shop...........................8.............................800-845-6075 Sam x702

grapple, 5,000 original hours.

Profile Techno;ogy........................7.............................800-369-4242

Firewood Processor - This is

(excellent condition.). Item ID

Row Electric....................................10...........................800-248-4479

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 381

13238. Chris x700

TraxPlus ..........................................4.............................601-635-5543 1995 Barko 775 B Feller Buncher automatice firewood processor Trelan...............................................40..........................989-561-2280 - Pumps recently redone. 400 hrs with John Deere power unit with on injection pump. always started low hours. Control panel includes Woodlandia....................................11..........................877-508-8777 tach, oil pressure, water temp and PLEASE PRINT

amp gauges. Cuts logs up to 16”.

good. in good working order. 22in

JANUARY 2019

kohing head. head works great.

If you need to Change your Address or

Item ID 13185. Sam x702then OneAdd owner Your and comes with all to our Name mailing list, 1999 Barko 160D new engine manuals and receipts.

Purchased please complete this form and mail to: with new for $32,500. Item ID 13865.

approximately 1500 hours. Hour

- Small manufacturer in PA has

Lumbermens™ Magazine dont work. The last 2 owners Sam x702 P.O. Boxmeter 1916 have only used it to load trucks or LOGGING EQUIPMENT Columbia, TN 38402

Handles logs up to 32”. Uses

❑ Bandit Please ❑ Disc Please Change Please Remove delimber,❑ grapple has been rebuilt.

1999 1900Add Tracked

Best Value Portable Log Splitter made the best valued log splitter.

13HP Honda motor. Manual start

• Through-beam range u1p to 230 feet vans and produce 6 - 8 loads per but electronic option is available.

• Waterproof -Has IP67 rated day. Item ID 13882. Austin x703 Log Lift. Uses 4-way wedge Not affected adjustable by vibration EDGERS &• GANGS to single two way. Great • 60k LUX Immunity toPA.sunlight Brewco Saws - Two Brewco Saws Value!

Item ID 12062. Sam x702 in excellent condition. Runs great.

a Chomper Model 16 PDA

Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

BANDIT

as a backup as needed. Has a CTR

*Company name and address process have your change.

Boomto cylinders minor leaks.

Chipper - Cat Under Carriage at required Company Name*:_ Item ID 13694. Sam x702 50% or better.

475________________________________________________________ hp Cummins

94 Barko 275 - Excellent value Diesel.

7500 Hours. One owner.

Individual Name:__________________________________________________________ with low at hours at 3,500. 5.9 Well maintained.

Item ID 13294.

Address:_ ________________________________________________________________ Sam x702

CUMMINS continuous grapple.

_______________________________________________________________________

2004 Bandit Beast Model 4680 -

Runs Great!. Item ID 13740. Sam

City:____________________________________________________________________

3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

x702

BELL

State:___________________________________________________________________

Zip:__condition. ___________________________________________________________________ 1990 Bell Super T - This Bell has good Just finished 10

Phone:__________________________________________________________________ a brand new Duetz engine. Lever Acre clearing job, ready to work!

control, 33” bar, pump and tranny Remote control. Big production Email:___________________________________________________________________

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 39

LUMBERMENS™ MAGAZINE Post Office Box 1916 Columbia, Tennessee 38402

PRSRT STD. U.S. Postage PAID Permit No. 212 Pulaski, TN

®

®

498 Eight Mile Road | Remus, MI 49340 Phone: 989-561-2280 | WWW.TRELAN.COM

Over 40 Years!

BUY FACTORY DIRECT: PARTS & CHIPPERS Chippers With Tier-3 Engines Available

Factory Direct Inventory Blowout Sale at Remarkably Low Prices!

Model 23-LRC

Model 786-WRC

BLOWOUT PRICE: $355,000

BLOWOUT PRICE: $480,000

Model 640-RC

BLOWOUT PRICE: $295,000

Model 686-WRC

BLOWOUT PRICE: $435,000

Model 646-WRC

BLOWOUT PRICE: $335,000

Some Models are New and Unused while others are Demonstrators with very low hours and are in like-new condition. No trades. Freight not included.

LL BUY A LAN TRE YOUR ACTORY F PARTS AND SAVE T DIREC $$$$$ $

TRELAN CHIPPERS ARE KNOWN FOR THE HIGHEST PRODUCTION RATES IN THE INDUSTRY!

If you are interested in a Trelan Whole Tree Chipper or Trelan Parts, contact us at: 989-561-2280 or Toll Free (877) 487-3526