LBX Online Magazine

February 2011

Since 1986 - The Original (800) 315-9950 or (615) 349-1890

-PHHFST Â… 4BXNJMMT Â… 1BMMFU .BOVGBDUVSFST Â… 8PPE 3FDZDMJOH &RVJQNFOU

DEALS OF THE MONTH 2001 MULTITEK 2020 LDSC FIREWOOD PROCESSOR

Item ID: 12131 Contact: Daren Ph: 800-315-9950 x603

2005 VALMET 890.2 20-TON FORWARDER If you want to take your operation to the next level, look to Wood-Mizer’s full line of resaws. With industrial, mid-level, and entry-level machines, these resaws help you reduce cost, increase yield, and grow profits. / Rugged, high production, low maintenance

Item ID: 12068 Contact: Tom Ph: 800-315-9950 x604

2003 PETERBILT 379 W/BOX

/ Extremely accurate, single and multi-head band resaws yield more lumber, value, and profit / Breakdown cants with pinpoint accuracy / Thin-kerf provides higher yields and productivity

Now is the time to revitalize your operation and get results with a Wood-Mizer ReSaw.

INDUSTRIAL:

Item ID: 12112 Contact: Tom Ph: 800-315-9950 x604

4FF 1IPUPT POMJOF BU XXX -#9POMJOF DPN

MID-LEVEL:

ENTRY-LEVEL:

800.553.0182

WoodmizerIndustrial.com

PALLET STOCK, STUDS, I-JOISTS, STRUCTURAL COMPONENTS THE L-M SAWS, WILL TAKE YOU TO THE NEXT LEVEL! Leading the industry in bundle cross cut systems since 1957!

New Design!

New Technology!

Portable Yard Saw Model 200MP-7-SS Gas Model 100MP-7-SS Electric 3 inch side shift, a standard feature

Traveling Arch Saw Hydraulically controlled No manual cutting Our most popular turn key system

The New L-M “I-CUT” Bundle cross cut system! * 60’ long frame to precision cut your I-Joists * Precision accuracy of +- 1/32” * Shorter system are available to process all your cutting needs * Tremendous labor savings, Guaranteed!

L-M Deck Cut Off Saw 3 foot to 12 foot bar lengths Hydraulically controlled

Automatic Strapping System Attach bottom crossers Side squeeze incorporated Polyester strap

Flush End Bump Rollcase Reduce or eliminate your end trims

The Verticut P4 System now offers scan and cut technology, reducing operator error by using a bar code system!

Visit our web site www.LMSaws.com to see our complete product line and videos!

L-M Equipment Co. Ltd Phone: 604-431-8800 Toll Free: 1-800-455-8807 Web Site: www.LMSaws.com E-Mail: Sales@LMSaws.com

INVENTORY CHANGES DAILY

C.

J

ACHINE, M I M N E "Your Full Source of Good Sawmill Equipment" NICHOLSON 22� A5

www.JemMachine.com P.O. Box 108 • 125 Airport Road • Grangeville, Idaho • 83530

YOUR EQUIPMENT DOLLARS GO FURTHER WITH US – GIVE MIKE A CALL – (2) 24-UNIT CHIP BINS

MORBARK STAC TRAC

IgjX` 7^ch ') id +' Jc^i " LZ ]VkZ &) ') " (% gZVYn [dg h]^ebZci VcY hdbZ hi^aa hiVcY^c\

l$ .* d[ IgVX`0 CZl¡CZkZg >chiVaaZY ##################### $24,500

>c HidX` (*š ))š 48� HORIZONTAL CHIPPER

GZVYn id 7Z >chiVaaZY

6X6 PRECISION CHIP SCREEN

FALCON/KIMWOOD HOG

Bargain Basement Price!

ARMSTRONG #4

JEFFREY 40x40 HAMMER HOG

8=>EE:GH =D<H '%]e id *%%]e

CALL OR EMAIL

WEIGHT STRAIN BANDMILLS

B^`Z ;gZZbVc (503) 407-9652 wmikefreeman@gmail.com ¡ D[Ă&#x192;XZ ¡

(800) 282-5597 ¡ ;Vm ¡

(208) 983-0633

MAKE OFFER!

6gbhigdc\ )! G# =#! H$C &*(&& ##################################### $4,900

20 USNR DBL LENGTH INFEED

Original

5IF

-6.#&3."/µ4 &9$)"/(& Your #1 Source for Forest Industry Products!

The Lumberman’s Exchange is published monthly and is circulated internationally to sawmills, loggers, pallet makers, recyclers and industrial woodworking plants.

PUBLISHER Woods Publishing ADVERTISING SALES Morris Woods (615) 349-1890 morris@LBXonline.com DESIGN DIRECTOR Heninger & Associates lbxonline@comcast.net EQUIPMENT REPS Equipment Representative Daren Bodine (800) 315-9950 x603 Equipment Representative Tom Hirt (800) 315-9950 x604 MAILING ADDRESS P.O. Box 1916 Columbia, TN 38402-1916 (615) 349-1890 Phone (931) 233-0802 Fax AD SUBMISSIONS May be sent to— LBXonline@comcast.net POSTMASTER Send address changes to: Lumberman’s Exchange P.O. Box 1916 Columbia, TN 38402 The Original Lumberman’s Exchange is published monthly

by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers the Lumberman’s Exchange, its principles and associates are not held liable for errors or omissions. Reproduction in whole or part prohibited with-out written consent.

** Auctions **

JAMES G. MURPHY — Page 10 WWW.MURPHYAUCTION.COM PUBLIC AUCTION STIMSON LUMBER COMPANY 7i` iÃ`>ÞÊUÊ >ÀV ÊÓÊUÊ \ääÊ>° ° 49800 SW Scoggings Valley Rd., Gaston, Oregon

** INFO LINK ** AJD Forest ..............................16

Jem Machine .............................4

Amark .....................................12

Litco ........................................15

Anson ........................................7

LM Equipment, Canada ............3

AWMV ......................................1

M&F Gauge ............................25

B & B Mfg. .............................31

Machinery Sales Co., Inc. .........8

B. H. Payne .............................15

Menominee Saw......................26

Baker .................................17, 38

Midwest Sharpening Service ..28

Bartlett Saw Service................32

Multitek ...................................22

Bay Equipment........................39

Phase-A-Matic ........................29

Ben Jones Equipment........19, 27

Piper’s Saw Shop ....................24

Buck Equipment (AIM) .........16

Resource Recovery .................29

Canadian Mill Equipment .......21

Rotochopper ............................40

Cardinal Wireless ....................30

Row Electric............................38

Cord Master ............................20

Sawmill Exchange ..................33

Corley Mfg ..............................35

Select Sawmill ..................23, 37

CRD Metalworks ....................14

Suffolk Machinery ....................2

Dyna Products .........................18

US Blades................................36

Five Star Lumber Co,. LLC ......9

Winston Equipment.................21

Henry Repeating Rifles ...........34

Woodmizer ........................13, 17

Hutto Wood Products ..............11

X-S Iron ..............................9, 13

James G. Murphy..................10

©2011 by Woods Publishing.

For Classifieds Call Your LBX REP at 1-800-315-9950

FOR CLASSIFIEDS Call 800.315.9950 See pictures, prices, and Location of all equipment at www.LBXonline.com BANDMILLS & HEADSAWS Timber Harvester 36HTE Band Sawmill - Purchased new in Oct. of 2005 for $41,690. It has the following extra features 1. Hydraulic power rolls- for exiting large cants/timbers 2. 30 HP Electric three phase motor 3. Large roller guide assembly 4. 3rd log post 5.

Dual chain drive assembly 6.

Electric Set works 7. Dragback guide assembly 8. 4’ bed extension Saw is capable of sawing up to 22’ long We were sawing 5-6 MBF per day when we took it out of production.

Everything is in working condition. Ran indoors forless than 8 months. Replaced with a larger saw. - Item ID-10489 - Contact-Chris WOODS Phone- 800.315.9950 Ext- 600 BLOWERS Koger Blower - 75-hp, 54”x16” fan, 18” inlet and 18” outlet Item ID-10849 - Daren 800-3159950 x603 Phelps blower with 20 HP motor - Phelps blower with 20 HP motor - Item ID-11742 Daren 800-315-9950 x603 CARRIAGES & DRIVES Salem 4-headblock Carriage - Left handed - Item ID-10846 Daren 800-315-9950 x603 CHIPPERS CM&E 36” chipper. Bottom discharge - 75 HP - Item ID11751 - Daren 800-315-9950 x603 2000 BANDIT 150XP CUMMINS 3.9L DIESEL 12 IN. CAPACITY - Item ID-11790 Daren 800-315-9950 x603 2008 Dynamic 585 Chipper Factory Rebuilt with upgraded components including new discharge chute, new larger bearings, new larger feed pins, new access panels to chip chamber wear plates. JD 500 HP engine with 2200 hours.

Limited factory warranty on upgraded features. - Item ID12059 - Tom 800-315-9950 x604 2008 Model 570 Dynamic Chipper - 1830 Hours; New Drum at 750 hours; Cummings

The Original Lumberman’s Exchange n 5

6 n

HiViZ

CALL US TODAY FOR ALL YOUR USED EQUIPMENT NEEDS!

â&#x20AC;&#x201C; JANUARY â&#x20AC;&#x201C;

2005 VALMET 890.2 20-Ton Forwarder

2002 WOODMIZER LT-40HDG-25

8^in

FREE EQUIPMENT LISTINGS! CALL â&#x20AC;&#x201C; (800) 315-9950

DEALS OF MONTH FROM

.05*7"5&% 4&--&3

February 2011

E]dcZ

â&#x153;

E#D# 7dm &.&+ 8dajbW^V! IC (-)%'

*Company name and address required to process your change.

6YYgZhh

>cY^k^YjVa CVbZ

The Original Lumbermanâ&#x20AC;&#x2122;s Exchange

Company Name*

Daren Bodine Phone: 800-315-9950 Ext. 603

If you need to Change your Address or Add Your Name to our mailing list, then please complete this form and mail to:

â?&#x2018; Please Add

â?&#x2018; Please Change â?&#x2018; Please Remove

O^e

EQUIPMENT REPRESENTATIVES

Tom Hirt Phone: 800-315-9950 Ext. 604 325 HP Engine; New wear plates in belly pan and discharge chute. Remote Control. Runs good. - Item ID12061 - Tom 800-315-9950 x604 48â&#x20AC;? Precision Chip Pack with 90â&#x20AC;&#x2122; vibrating conveyor Precision 48â&#x20AC;? 3 knife chip pac, 5x5 screener, with a brand new Y valve and 90â&#x20AC;&#x2122; vibrating conveyor, 100 hp electric motor on the chipper, 15 hp motor on the blower, and a 3hp motor on the shaker.

This machine is in very good condition and is ready to work. - Item ID-12128 - Daren

Powerful 8 wheeled forwarder with many options. Good condition and well maintained. Eco Tracks. Incredible flotation for working in soft ground conditions. Uses less than 4 gal/hour! Extra strong loader for handling large loads. Huge cab with Maxi control system that monitors all systems.

Ready to go to work TODAY! Priced way below market. TN

Item ID: 12081 Contact: Daren Ph: 800-315-9950 x603

Item ID: 12068 Contact: Tom 800.315.9950 Ext. 604

Item ID: 12076 Contact: Daren Ph: 800-315-9950 x603

1996 BARKO 275B

See Photos online at XXX -#9POMJOF DPN 800-315-9950 x603 66â&#x20AC;? Fulghum 8 Knife Chipper - with a 250 hp motor, $7500. - Item ID-10478 - Chris 800.315.9950 x600 Fulghum 54â&#x20AC;? 8 knife chipper - Horizontal feed. Vertical discharge. No motor. No pulley on machine but a bushing is present. - Item ID11737 - Daren 800-315-9950 x603 HMC 48â&#x20AC;? Chipper - HMC 48â&#x20AC;?side entry, top discharge chipper. It hs a model CM 48.

Serial 23-111. It has a 75 HP 208-230/460 totally enclosed motor and is a very clean looking machine - Item ID-

11750 - Daren 800-315-9950 x603 Hydraulic Feed Chipper BANDIT 4B Cummins Power, Works Well - Item ID-11806 Daren 800-315-9950 x603 Precision 48 Chipper & Shaker - Fines blower and dual trailer shoot. 125-hp electric motor and 36â&#x20AC;&#x2122; vibrating conveyor. Item ID-11667 - Daren 800-3159950 x603 Trelan DL18 Whole Tree Chipper - Powered by a 475-hp Cat 3406 diesel engine. Has a knuckleboom loader. Will chip up to an 18â&#x20AC;? diameter log. Is pulled with a semi tractor.

Cab has sound protection and

Visit us online at www.LBXonline.com!

For Classifieds Call Your LBX REP at 1-800-315-9950

The Original Lumbermanâ&#x20AC;&#x2122;s Exchange n 7

WE ARE OVERSTOCKED! PRICES REDUCED! TAKE ADVANTAGE OF THIS CHANCE TO SAVE BIG! 9802 North Vancouver Way Portland, Oregon 97217

7 i Ê > }Ê Ã Êv ÀÊ i«ÌÊ 8ÊUÊ >V Ã> iÃJ Ã °V

0H s &AX WORLD’S LARGEST INVENTORY New & Used Sawmill & Planing Mill Equipment %DEM v X "ALANCED 6IBRATING #ONVEYOR

.%7 -ORBARK 3TAC 4RAC

3IMONDS v +NIFE 'RINDER

BANDMILLS & HEADRIGS Salem 6’ Air Strain Bandmill Kockums 6’ Quad Maxi Mill with 6’ Quad Salem 7’ RH Bandmill Salem 5’ Air Strain Bandmill L&B 6’ Air Strain Twins McDonough 62” Twin Air Strain CARRIAGES & DRIVES Salem Linear 36" 2-Block Tyrone 240 Hydraulic Drive Corley 40” Hydraulic 3-Block Salem 24” 3-Block Linear Carriage USNR 2000, 42" Stud Carriage Salem 60” 4-Block Carriage Salem 42” 4-Block Carriage CHIPPERS & SCREENS BM&M 5’X14’ Screen Rotex 6’X16’ Screen Precision 58” Horizontal Feed West Salem 58" Horizontal Feed Precision 8X8 Screen Kockums 8X8 Screen Precision 66" Horizontal F. Precision 118” HFBD Chipper Precision 96” Whole Log Precision 48” Horizontal F. B.C. 6140 Slant Disc CM&E 36” Rechipper DEBARKERS Nicholson 35" A-2 Debarker Nicholson 22” A-5 Debarker Nicholson 44” A-2 Debarker EDGERS & GANGS Pendu Double Arbor Gang Schurman Late 4” x 36” Shifting

OVER 13 ACRES

OF

TMT Chipping Edger Schurman 6TA48 Combination Ukiah 6” x 48” Gang Edger Schurman 12” Double Arbor Gang FILING ROOM EQUIPMENT Vollmer Cana E (8) Wright Mod. 1801 (3) Weinig R 934 Profile Grinder Erma 71” Mag Bed Grinder Newman G-200 Grinders Hanchett Knife Grinders (10) Wright W-1600 Auto Tipper Wright W-150 MSM Top & Face Armstrong No. 90 Equalizer Armstrong Dual Side Grinder Armstrong Side Pro Newman G-20 Rotary Armstrong No. 4 RH B.S. Grinder Armstrong No. 25 Circle Hanchett DN-40 Knife Grinder Armstrong No. 4 LH B.S. Grinder Armstrong No. 4 B.S. Stretcher Roll HOGS & PULVERIZERS

Jeffrey 36 x 60 Shredder Jacobson Horizontal Hog Zeno Low-Noise Grinder West Salem Big Brute Grinder Jacobson Hammer Mill W. Salem 52” Horizontal Grinder Jeffrey 56 WB Hammer Hog Lamb HX 750 Hammer Hog Kimwood Rotary Hog Jeffrey 76WBH Horiz. Hog Gruendler 50XE Hammer Hog MISCELLANEOUS Dog Ear Machine Smith Twin Horizontal Resaw Globe Strip Saw Morbark Stac Trac, NEW Mereen Johnson 424DC Ripsaw Industrial 3496 Finger Jointer Industrial FJS-25 Finger J. System Hurricane 28” Chop Saw Fruilmac End Matcher

(4) Peerless 24-Unit Bins Peerless Trailer Dumper Samuels Plastic Strapper (1) 60-Unit Peerless Bin L&M Log Cut-Off Saws Timesaver Sanders (6) Lumber Stackers (3) Irvington 20’ Trimmer, 1’ Saws Mereen-Johnson 48” Ripsaw Sullair V-200TS Compressor 5-Arm Hyd. Tilt Hoist Sticker Recovery System Irvington Planer Trimmers PLANERS & MOULDERS Weinig Hydromat 23 Weinig Powermat 2000 Stetson-Ross Timber Sizer Weinig Powermat 2000 Mattison 226 12” Moulder Mattison 228 16” Moulder Diehl 6-head TF Moulder Buss 55 Double Surfacer Buss 88 Double Surfacer Wadkin 6-Head Moulder Yates A-20 10-Knife Weinig U22A, 6-head Wadkin 7-Head Moulder Newman M-990H 20-Knife Newman 382 Double Surfacer Newman M712 12-Knife S-R 6-10-A1 10-Knife Coastal 24” 20-knife Planer S-R 6-14-D1 24” 16-Knife S-R Chip Blankers Weiniig P22N 5-Head RESAWS McDonough 54” Twin Horizontal 36” Tri-State Tilting Resaw Turner 48” Rollfeed Resaw Turner 52” Rollfeed Resaw Salem 6’ Horiz. Air Strain Kockums 6’ Horiz. Twin Air Strain McDonough 62” Linebar Resaw

WE ARE PARTING OUT

Woods Planers 412M, 414M, 407M, 409M. 415M Woods Moulder 132M Yates Planers A-20, A-62, A-66 Stetson-Ross Planers 6-12-A1, 6-12-C1, 6-10-A1, 6-14-D1 Mattison Moulders 276, 226, 228 SAVE BIG ON MOTORS AND MAJOR PARTS!

GREAT BUYS ON USED EQUIPMENT!

For complete equipment list, visit our website:

ÜÜÜ° >V iÀÞÃ> iðV

OR CALL AND ASK FOR DEPT. LX

( 8 6 6) 241-2977

heat. Rebuilt from the ground up, new wheel bearings, new face plate for chipper wheel, changed Detroit engine to Cat engine went from 300-hp to 425-hp, added new belts and heavier bearings. Only run about 6 months after rebuild.

Can be used to make fuelwood. Is ready to go, needs no work. Was manufactured in the mid 80’s. extra knives that come with it - Item ID-11292 Daren 800-315-9950 x603 CHOP SAWS Block saw - This well-guarded block saw has a 4x6 capacity.

Blocks drop into a small elevator. It has a motor on the elevator and one on the saw. Motor controls are present. Air is hooked up to actuate the saw stroke. Feed is manual. Block length is adjustable - Item ID-11838 -

13*$& 50 4&-- 26*$,

2005 CordKing 60 Firewood Processor Item ID: 12027 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com

Daren 800.315.9950 x603 COMPLETE SAWMILLS 2005 Timberharvester Sawmill - Purchased new in December 2005, has 1550 hours, powered by a 47-hp Lombardini diesel,

Contact Us for Your Equipment Needs. If we don't have it, we can find it!

2006 JD 748GIII Dual Arch Skidder Approx. 8400 hours; Very well maintained; 30.5 tires at 40%; Sweda axles; Winch. Tight center section and cradle.

Unit working every day.

TN Item ID: 12117 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

log debarker, computer setworks, can cut up to a 36”x21’ log. Stored and run

2003 Peterbilt 379 w/Box & New Serco 8500 VIN: 2XP5D89X13M591354; CAT 475 HP Diesel; Air Trac Suspension; Aluminum Wheels; 24.5 Tires; Truck in excellent condition. Has new box and new Serco 8500 loader. Perfect for storm or FEMA cleanup. Customer will sell separately. Ark.

Item ID: 12112 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

SCRAGG MILL 304.872.2988 FOR SALE

06 John Deere 650J - Closed cab with heat and air, new undercarriage, 85% on tracks, forestry package, new paint, showing 3,114 hrs. ................... $58,500

40-%

00 John Deere 650H - 6-way hydraulic blade, forestry package, undercarriage fair, new injector pump, showing 9,975 hrs. .... ............................................. $39,500 01 Timco 425D Feller Buncher - Rebuilt motor, 80% on tracks and undercarriage, 33 inch bar saw with laterial tilt head, showing 7,100 hrs. ............................... $105,000

40-%

96 John Deere 750C - D6 Berco undercarriage, 6-way hydraulic blade, forestry package, new track pads and paint, showing 8,127 hrs., in excellent shape $30,000

81 John Deere 850 - 12ft 6 way hydraulic blade, forestry package, 65% on tracks and undercarriage, showing 6,267 hrs. ............................................................... $14,000

40-%

88 John Deere 550G - 6-way hydraulic blade, forestry package, 70% on tracks and undercarriage, showing 7,185 hrs. ............................................................... $21,500 98 Husky Brute XL 175 with CRT Bucksaw - Cummings 6 BT, continous turn grapple, on a Pitts pintel hook trailer .. ..................................................................... $27,500

• Located in Central Wisconsin • Scragg Mill: Processing Bolt Timber and Cants • Cut stock, stakes, etc.

• Fully operational • 1.2 M BTU Biomass Burner for Heat and (2) Gas Fired Heating Systems • 20,000 sq. ft. production area • Completely renovated in 2009

CALL TODAY

(510) 795-7204

For Classifieds Call Your LBX REP at 1-800-315-9950

The Original Lumberman’s Exchange n 9

!"#

PUBLIC AUCTION =O(9]=]9^9!((_((=O(2-!-2M-!

"#$%&'()*!+,!-,).(/!0(#$%/(1!2*!3,/(4*!5/,6(!327%8%*9

!"#$!%&'()$*+,'-%$./&0 !"#$%&&'()&"*+,$%&&(-./%0$+*1'(23&&%*4(!1356

789(:(;-<=-!<8>(:(982?@(A ),+B%+#(C:D'(E/+FG"H'(9",5I(J(3,(KH(8003%*1$+*1

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

(!

(

:;<!=$9(/4!>/('%$'

?@--!3A0!@+!B--CDE0@E"F!=0A?GC0"

James G. Murphy Inc. Commercial & Industrial Auctioneers 18226 68th Ave NE, Kenmore, WA 98028

1.800.426.3008 - 425.486.1246

murphyauction.com

NEW HUTTO 14â&#x20AC;? PTO SHAVING MILL â&#x20AC;&#x2DC;93 Mack w/ â&#x20AC;&#x2DC;99 Serco 8000 Loader 93 Mack CL713; Mac E-7 400hp engine; 20,000 lb front and 44,000 lb rear; Camel back rear suspension ; New 20ply steel tires; Factory built double steel frame; Complete HD Mack power train (engine, trany, diff); 3:86 ratio; Jake brake and diff lockout ; 99 Serco 8000# loader with 4â&#x20AC;&#x2122; squirt boom; This is a factory built Log Truck. MO

Item ID: 12098 Contact: Tom 800.315.9950 Ext. 604

Â&#x2122; Â&#x2122; Â&#x2122; Â&#x2122;

6jidbVi^X VcY bVcjVa Xdcigdah Dji"[ZZY WZai ^cXajYZY HZa["XdciV^cZY ]nYgVja^X hnhiZb CD X]V^ch dg XVWaZh

Â&#x2122; Â&#x2122; Â&#x2122; Â&#x2122;

H^m"`c^[Z ]ZVY EgdYjXZ je id &% nVgYh$]djg EdlZg dei^dch/ \Vh! Y^ZhZa ZaZXig^X >cigdYjXidgn HeZX^Va ¡ $22,900

Also available from Hutto Wood Products: H]Vk^c\ b^aah l^i] egdYjXi^dc [gdb &%"*% nVgYh$]djg! 7Zaih 8dckZndgh! Ad\ BZgX]VcY^h^c\ HnhiZbh#

www.LBXonline.com

(803) 317-3129

www.huttoshavingmill.com

Simonds Vertical Circle Saw Leveler Excellent Condition. Only 3984 Hours. Like new.

Ball Type KRO-9702.

Reduces run-out allowing saws to cut more accurately. Removes irregularities. Laser readings are displayed on digital screen. Able to process saws from 3â&#x20AC;? up to 32â&#x20AC;? diameter and plate thickness up to .150â&#x20AC;? thick. Seller will provide set up and training. Half the price of new! MA Item ID: 12084 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

â&#x20AC;&#x2DC;92 Ford L8000 1996 225A Timberjack Skidder Item ID: 11991 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com

inside. - Item ID-11584 - Daren 800-315-9950 x603 Meadows #2 Sawmill Meadows #2 carriage - 15â&#x20AC;&#x2122; OAL with 4 headblocks - 3 hydraulic dogs - 5 axles, hydraulic setworks with pantograph arm assembly to carry hydraulic & electric lines from carriage to husk

w/1996 Series XL235E LX235E Log Loader

Item ID: 12025 Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com - clock face lumber dial controls for setworks & dogs.

Meadows #2 track frame, with idler assembly. Reckart hydraulic feed package with 40-hp electric motor. Mellott log turner. 35â&#x20AC;&#x2122; log deck with stop & load. 130KW generator.

- Item ID-11086 - Daren 800-3159950 x603 Sawmill With Chipper -

For Classifieds Call Your LBX REP at 1-800-315-9950

Carthage carriage, helle sawmill and chipper - Item ID-11992 - Daren 800-315-9950 x603 EDGERS & GANGS Meadows 7â&#x20AC;? X 48â&#x20AC;?

Combination edger - Serial # T7-1738-99. Was once used with a shifting saw. Some, but not all of the parts for this are present. There are three 23â&#x20AC;? split strob saws. There is an integrel hydraulic system on this machine. 8â&#x20AC;&#x2122; outfeed. 10â&#x20AC;&#x2122; infeed with hydraulic roller holdover and two air popup pushover chains. Remote operator station. Hydraulic press roll lifter. Main shaft is 2-15/16â&#x20AC;?. There is no main motor present. There is a mast for shifting lasers but the system is not complete.

Footprint of unit: 7â&#x20AC;&#x2122; X 22â&#x20AC;&#x2122; Item ID-11733 - Daren 800-3159950 x603 Miner Edger - 40 HP Electric motor, 4â&#x20AC;? x 32â&#x20AC;? capacity, up

The Original Lumbermanâ&#x20AC;&#x2122;s Exchange n 11

to (4) blades, 7’ Infeed, 8’ outfeed - Item ID-10789 - Chris 800.315.9950 x600 Ogam chain drive open arm gangsaw. - 2 Main drive motors included. 10 HP and 30 HP. - Item ID-11744 - Daren 800315-9950 x603 Vertical edger for RH mill - 50 HP, 20” F saws with carbide bits, solenoid valves, splined arbor. Good looking edger. Item ID-11781 - Daren 800-3159950 x603 FIREWOOD PROCESSORS 2001 Multitek 2020 ldsc firewood processor with 20ft conveyer - Engine and Hydrolic pump replaced 820 hrs ago. Yanmar 65hp diesel engine, 404 Pitch Chain. This machine has a total of 3000 hours total on the machine Item ID-12131 - Daren 800-3159950 x603 2005 2040xp2 Firewood Processor + 30’ Conveyor 80 hp John Deere Diesel, 30’ Conveyor, 2-strand roller chain, hydraulic lift, 40’ long, 20” log capacity, 8-way wedge, 3,300 hours 5th strand live

2005 Prentice 280 TMS Ldr

1979 Timberjack 230 Forwarder

LESS THAN 1000 hrs.

NOT A TYPO! Cummins engine and a 42” Hultdins grapple. Comfort cab with AC/Heat/Stereo. CTR 42IP Sawbuck included.

This is as close to buying a new loader as you will get! Customer never got job the machine was intended for. Fantastic value. Ready to work! TN

1979 Timberjack 230 Forwarder (12122) Very good condition for the age. Extra long frame. Tires: 67-34-25 at 60% Detroit engine (353). Front Blade. Husky loader with grapple has excellent lift capacity.

Currently loading hardwood logs. Great flotation. KY

Item ID: 12121 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

Item ID: 12122 Contact: Tom 800.315.9950 Ext. 604

deck arm for processing blocks as short as 24” (normally a $2,000 option),

Save Your Stubs & Pieces!

www.LBXonline.com

Very Well Maintained Heated Operator Cabin, Pilot Electric/ Hydraulic Joysticks Safety

2005 JD 650J Dozer w/Winch 3200 total machine hours, 25 hrs on complete new severe duty bottom and complete service, and winch update by JD dealer. Optional lights package. Heater, air suspension seat. No tears in upholstery, no dents in grille. Very nice dozer. The winch update included an updated pump and gears. Pulls great! Below market price. OH

Item ID: 12120 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

Our newest color—Light Blue

➨

Let us reprocess them $25 per 100 Now have Factory Seconds $25 per 100 sticks

12 n

February 2011

Visit us online at www.LBXonline.com!

Seat, Clean Out Pan Option (normally $1,000 option - Item ID-11871 - Daren 800-315-9950 x603 2005 Built-Rite model 50 SCP processor - Includes Auto log stop, 3 strand live deck, 4 1/2” cylinder, cab with heat & A/C, 750 hrs, 68 HP Kubota diesel Item ID-11619 - Daren 800-3159950 x603 2006 Cord King 60 firewood proccessor - 600 hours, with 30 ft. conveyor, 120hp John Deere diesel engine, Heated operators cab, Stereo in operators cab. 58 ton ram serial#M160JDT2411177 - Item ID-12027 - Daren 800-315-9950 x603 2006 Timber Wolf Firewood Processor with 26’ conveyor - 2006 Timber Wolf Firewood Processor with 26’ conveyor, 1750 Hrs, auto cycle, operator cab, - Item ID-12020 - Daren

800-315-9950 x603 Best Value Portable Log Splitter - Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA - Item ID-12062 - Tom 800-3159950 x604 Simplex Chomper 14 Chomper firewood processor, model simplex 14, will handle logs up to 14” in diameter unlimited length . Can do one cord in approx 1 1/2 hours with one man , cut split and ready to go . Uses a hydraulic shear instead of a saw so no sharpening , can split two or four ways. In Maine - Item ID-11707 - Daren 800-315-9950 x603

Contact Us for Your Equipment Needs. If we don't have it, we can find it!

)6(& 13*$& 3&%6$5*0/

‘00 Daewoo w/Denharco DM3500 Stroke Delimber Item ID: 12026 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com

TIMBERWOLF Pro-HD XL Inline Firewood Processor 80hp John Deere, Auto cycle, 8 way wedge, 16’ live deck, Cuts & splits up to 3 cords/hour, This machine was a demo unit and has very low hours.

Also includes a partial factory warranty - Item ID-12013 Daren 800-315-9950 x603

2006 SALSCO 3D Shaving Mill Item ID: 11977 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com

FORKLIFTS 1985 Cat 8000# Forklift - V80E type d. Axle repaired and transmission fixed. - Item ID12124 - Daren 800-315-9950 x603 1987 Hyster 25,000# forklift - 8’ forks; new Perkins diesel engine; dual front wheels; 25,000#; side shift; heat in cab.

Runs great. - Item ID-11672 Daren 800-315-9950 x603

304.872.2988 99 John Deere 648 GII Grapple Skidder - Single function grapple, decent tires, approx. 9,900 hrs. ............. ..................................................................... $35,000 98 John Deere 640 GII Cable Skidder - New front tires and decent rear tires, approx. 9,500 hrs. ............ $35,000 88 John Deere 640D Cable Skidder - Fair condition, 17,456 hrs. .................................................... $15,000 FEC Flat Deck Bucksaw 3-line hookup ............... $3,000 Tough winter weather is here, but that doesn’t mean you have to put a freeze on sawing. To maintain your production and quality, use the leading profile ground blade in the industry: Wood-Mizer Blades. Ask for the 4 or 7 degree in higher horsepower, larger sawing environments, or the 9 degree in low horsepower and smaller log applications.

CRT 42 Flat Deck Bucksaw 3-line hookup .......... $3,000 07 John Deere 450J - Closed cab with heat and air, 6-way hydraulic blade, Full forestry package, 60% on Track and undercarriage, showing 3,174 hrs . $42,500 96 John Deere 550G - 6-way hydraulic blade, lever steer, 50% on tracks, 70% on undercarriage, new paint, forestry package, showing 11,279 hrs. ......................... ..$25,000

Lames à bande d'alliage haute qualité

800.522.5760 | SawFaster.com Lames à bande d'alliage haute qualité

89 John Deere 550G - 6-way hydraulic blade, limb risers and screened in cab, 80% on undercarriage, new tracks and paint, showing 6,442 hrs. ...................... .....$19,000

Copyright 2011, Wood-Mizer Products, Inc.

For Classifieds Call Your LBX REP at 1-800-315-9950

The Original Lumberman’s Exchange n 13

2008 Timbco/ Valmet 445FXL w/Quadco 22â&#x20AC;? Saw Head; Latest Model of Tracked Feller Buncher from Valmet with Heavier Komatsu undercarriage.

3200 hours. Excellent condition. 28â&#x20AC;? double grousers. Leveling cab.

360 degree rotator on Quadco saw head gives great flexibility in production. Customer selling due to job changes. Great value!

If you need a strong machine for tough duty, this is it! TN Item ID: 12119 Contact: Tom 800.315.9950 Ext. 604

1996 Timbco 445EXL Tracked Feller Buncher Well maintained. History of maintenance available from owner. Final drive oil samples tested clean.

Cummins Engine. Cat side frames. Quadco saw head. Good condition.

Runs good. Great price!

Customer ready to sell.

Will consider helping with freight. West Coast machine.

Item ID: 12075 Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com

www.LBXonline.com

1995 Nissan Forklift - 15,500lb Capacity, Model: DF05N70V, Diesel, Pneumatic, Side Shift, 2-Stage Mast, 177 Max Mast Height, Hour Meter Reads: 8,224, S/N: 001800 - Item ID11892 - Daren 800-315-9950 x603 1997 Hyster Model H280XL - Forklift with 8731 hours; 100â&#x20AC;? forks; Side Shift; Perkins engine. Enclosed cab; Good condion. - Item ID-12045 - Tom 800-315-9950 x604 1998 Hyster Model H80XL2 8135 hours; Perkins engine; Sideshift; Free Travel Boom; Lowered Boom Height: 93â&#x20AC;?

46â&#x20AC;? Forks; Raised Fork Height: 194â&#x20AC;?; Runs and operates well.

Good backup machine or for limited use. - Item ID-12049 Tom 800-315-9950 x604 2000 Hyster H155XL Forklift - 15,000 lb Capacity, LP Gas, Rough Terrain, Pneumatic, Tilt, Side Shift, 2-Stage Mast, 173.2 Max Height, Hour Meter Reads: 3,938, S/N: F006D05789X - Item ID-11893 Daren 800-315-9950 x603 2004 Moffett Model M5500 Truck Mounted Forklift - 1418 Hours; Kubota Diesel; 4â&#x20AC;&#x2122; Forks,

Side shift, 4 Way steer, 12â&#x20AC;&#x2122; Mast, Tires Front 31.5X13-16.5, Rear 31X15.5-15. If you deliver products on a truck, this forklift goes with you. Top brand in the industry. Priced to sell. - Item ID-12069 - Tom 800-315-9950 x604 Case 586C Forklift - Forklift with good rubber, good brakes and runs good. Has side shift. 1982 year model. Case 4-cylinder. ITEM IS SOLD!!!! Item ID-11457 - Daren 800-3159950 x603 Hyster Forklift - 2WD, LPG, Pneumatic Tires, Est 8000LB Capacity, Sideshift, ROP, Hours Shown As 3451. - Item ID-12002 - Daren 800-315-9950 x603 GENERATORS 350 KVA Cummins - Genset with 9000 hours. - Item ID11994 - Daren 800-315-9950 x603 75KW Diesel Turbo Generator - 770 hrs on it. w/ a hercules Deisel Engine & right now itâ&#x20AC;&#x2122;s wired for 3 phase. No fuel tank underneath it, it was a platform. Very good Condition! - Item ID-10491 Chris 800.315.9950 x600

Chainsaw or Circle Blade, the Woodbine PRO â&#x20AC;&#x153;20â&#x20AC;?

DOES IT ALL!

Introducing the NEW Woodbine PRO â&#x20AC;&#x153;20â&#x20AC;?

Avaliable with .404 Harvester Chainsaw or Circular Saw Cutting System (50")

Simple Controls & Push Button Splitting

Circular Saw Saves on Maintenance

50 BHP CAT Power â&#x20AC;&#x201D; STANDARD!

UĂ&#x160; xäĂ&#x160; *Ă&#x160; /Ă&#x160;Ă&#x2030;Ă&#x160;Ă&#x2C6;Ă&#x201C;Ă&#x160; *Ă&#x160; iĂ&#x2022;Ă&#x152;â UĂ&#x160; ÂŁ{ÂżĂ&#x160; Â&#x153;Â?`Â&#x2C6;Â&#x2DC;}Ă&#x160; Â&#x2C6;Ă&#x203A;iĂ&#x160; iVÂ&#x17D;Ă&#x160;Â&#x2C6;Ă&#x192;Ă&#x160; i>Ă&#x203A;Ă&#x17E;Ă&#x160; Ă&#x2022;Ă&#x152;Ă&#x17E;Ă&#x160;vÂ&#x153;Ă&#x20AC;Ă&#x160;Â?Â&#x153;Â&#x2DC;}Ă&#x160;Â?Â&#x2C6;vi]Ă&#x160;ÂľĂ&#x2022;Â&#x2C6;VÂ&#x17D;Ă&#x160;Ă&#x192;iĂ&#x152;Â&#x2021;Ă&#x2022;ÂŤĂ&#x160;>Â&#x2DC;` increased production.

UĂ&#x160; nĂ&#x160;7>Ă&#x17E;Ă&#x160;7i`}iĂ&#x160;}Â&#x2C6;Ă&#x203A;iĂ&#x192;Ă&#x160;Ă&#x17E;Â&#x153;Ă&#x2022;Ă&#x160;v>Ă&#x192;Ă&#x152;Ă&#x160;>Â&#x2DC;`Ă&#x160;>VVĂ&#x2022;Ă&#x20AC;>Ă&#x152;iĂ&#x160;Ă&#x192;ÂŤÂ?Â&#x2C6;Ă&#x152;Ă&#x152;Â&#x2C6;Â&#x2DC;}° UĂ&#x160; "/Ă&#x160; iĂ&#x20AC;Ă&#x152;Â&#x2C6;wi`Ă&#x160;/Ă&#x20AC;>Â&#x2C6;Â?iĂ&#x20AC;Ă&#x160;*>VÂ&#x17D;>}iĂ&#x160;vÂ&#x153;Ă&#x20AC;Ă&#x160;Ă&#x192;>viĂ&#x160;i>Ă&#x192;Ă&#x17E;Ă&#x160;Ă&#x152;Ă&#x20AC;>Â&#x2DC;Ă&#x192;ÂŤÂ&#x153;Ă&#x20AC;Ă&#x152;>Ă&#x152;Â&#x2C6;Â&#x153;Â&#x2DC;Ă&#x160;Ă&#x152;Â&#x153;Ă&#x160;Ă&#x152;Â&#x2026;iĂ&#x160;Ă&#x153;Â&#x153;Â&#x153;`t UĂ&#x160; Ă&#x201C;{ÂżĂ&#x160;*Â&#x153;Ă&#x153;iĂ&#x20AC;i`Ă&#x160; Â&#x153;Â&#x2DC;Ă&#x203A;iĂ&#x17E;Â&#x153;Ă&#x20AC;Ă&#x160;VĂ&#x2022;Ă&#x152;Ă&#x192;Ă&#x160;Ă&#x17E;Â&#x153;Ă&#x2022;Ă&#x20AC;Ă&#x160;Â?>LÂ&#x153;Ă&#x20AC;Ă&#x160;VÂ&#x153;Ă&#x192;Ă&#x152;Ă&#x192;Ă&#x160;pĂ&#x160;Ă&#x192;Â&#x2C6;}Â&#x2DC;Â&#x2C6;wV>Â&#x2DC;Ă&#x152;Â?Ă&#x17E;t UĂ&#x160; Ă&#x17D;Ă&#x160;-iVÂ&#x153;Â&#x2DC;`Ă&#x160; Â?Â&#x153;VÂ&#x17D;Ă&#x160;Ă&#x152;Â&#x153;Ă&#x160; Â?Â&#x153;VÂ&#x17D;Ă&#x160; Ă&#x17E;VÂ?iĂ&#x160;/Â&#x2C6;Â&#x201C;it UĂ&#x160; iĂ&#x192;Â&#x2C6;}Â&#x2DC;i`Ă&#x160;vÂ&#x153;Ă&#x20AC;Ă&#x160; Â&#x153;}Ă&#x192;Ă&#x160;Ă&#x2022;ÂŤĂ&#x160;Ă&#x152;Â&#x153;Ă&#x160;Ă&#x201C;ä¸Ă&#x160;`Â&#x2C6;>Â&#x201C;iĂ&#x152;iĂ&#x20AC;Ă&#x160;Ă&#x152;Â&#x2026;iĂ&#x160;7Â&#x153;Â&#x153;`LÂ&#x2C6;Â&#x2DC;iĂ&#x160;*,"Ă&#x160;ÂşĂ&#x201C;äĂ&#x160;V>Â&#x2DC; iĂ?Vii`Ă&#x160;{Ă&#x160; Â&#x153;Ă&#x20AC;`Ă&#x192;Ă&#x160;ÂŤiĂ&#x20AC;Ă&#x160;Â&#x2026;Â&#x153;Ă&#x2022;Ă&#x20AC;Ă&#x160;Â&#x153;vĂ&#x160;ÂŤĂ&#x20AC;Â&#x153;`Ă&#x2022;VĂ&#x152;Â&#x2C6;Â&#x153;Â&#x2DC;t

These Features â&#x20AC;&#x201D; ALL STANDARD! â&#x20AC;&#x201D; Not Expensive Upgrades!

for Chainsaw or

ork â&#x20AC;&#x201D; Designed to W D ON! KE OR W NOT TO BE

Giving You More For Less Is The Woodbine Way. Call 888-667-8580 now to learn more!

17 Hyde Hill Road, Williamsburg, MA 01096 www.crdmetalworks.com Email: sales@crdmetalworks.co

14 n

February 2011

for Circle Blade Option...

3)/, ")# Visit our website for the Newest Video of The Rapido Loco Junior & The Profitable Rapido Loco Lineup

Ordering Parts is a breeze atom works.c

www.crdmetal

Firewood Processors Performance, Power & Profit

Visit us online at www.LBXonline.com!

KNIFE GRINDERS Hanchett Band Sharpener Sharpener with stretcher and shaver - Item ID-11601 - Daren 800-315-9950 x603 Hanchett Circular saw grinder - Hanchett Circular saw grinder This circular saw grinder appears to be capable of grinding up to a 36” diameter saw. Plate info: Size 724. Serial # 8109 - Item ID-11746 - Daren 800-315-9950 x603 Schneider Pattern Knife Grinder - Schneider Pattern Knife Grinder - Item ID-11743 Daren 800-315-9950 x603 LOG BOOM CRANES 1984 BARKO 80BC - Log loader, includes the International truck, sn#15298 Item ID-11428 - Daren 800-3159950 x603 LOG TURNERS Log deck headframe with Mellott chain turner. - Deck is intended for a RH mill.

Chain spacing as viewed from carriage Right to Left: 0”-60”118”. Turner is at 45”. Stop & Loader and deck drive shaft are 2-7/16”. Gearmotor is 3 HP (3 phase) with #100 Roller chain drive. Unit size: Length-132” Width-77” height-64”. Sprockets are 1” wide at tooth area. 12 tooth.

2-5/8” spacing. Would work for H-78 chain. - Item ID-11778 Daren 800-315-9950 x603 Mellot log turner & Hydraulic system - The Mellot Log Turnner Comes With With Joystick Control Valve And Hydraulic System.

- Item ID-11752 - Daren 800.315.9950 x603 LOGGING EQUIPMENT 1969 Fiat Allis articulating loader - 1969 Fiat Allis articulating loader with Log Forks Needs fuel tank cleaned out but works otherwise - Item ID-11437 - Daren 800.315.9950 x603 1974 BARKO 160 Knuckleboom Loader Log Loaders/Stackers - 1974 BARKO 160 Knuckleboom Loader Log Loaders/Stackers, Detroit engine, mounted on IH truck, with Barko 42 grapple Item ID-11979 - Daren 800-315-

1992 Bell Super T Item ID: 11898 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com

LATE 70’S

230 Timberjack Forwarder Item ID: 11993 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com

9950 x603 1978 CAT 518 Grapple Skidder - 23.1x26 Tires, tires 40%, Gearmatic Winch & Esco Grapple, Center Pins are tight Item ID-11800 - Daren 800-3159950 x603 1978 TIMBERJACK 225 DETROIT POWER-MANUAL SHIFT, Tires are 50%, Due to age of machine ares are unknown - Item ID-12031 Daren 800-315-9950 x603 1978 Timberjack 240A Cable Skidder - Strong simple unit.

In use today pulling hardwood logs. 28” tires at 40%. Detroit engine. MO. Engine recently rebuilt and valves freshly sealed. - Item ID-12123 - Tom 800-315-9950 x604 1979 JD 440C Cable Skidder - Rebuilt Deere 4 cyl. engine; Manual Transmission, Bodygood, open cab w/ ROPS, dozer blade, diff locks, winch with cable; Tires - 16.9 x 30 4@30%; Hour meter shows

When You Buy Your Circular Saws From B.H. Payne You’ve Bought the best... We Guarantee It! Traditional Quality Combined With Todays Technology Quality Brand Reg. U.S. Pat Off

Circular Saws Saw Bits and Shanks Circular Knives Carbide Tipped Saws Carbide Strobe ® Saws B.H. Payne & Company Saw Manufacturers

Call 800 752-0627

Make Sure To Ask For Our Free, Complete Saw Catalog We Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels, Knife Grinding Wheels, Saw Gumming Wheels & Knives.

Here’s What You Get With Every B.H. Payne Saw • Saws manufactured from only the Highest Quality Nickel Alloy Steel.

• Each Saw Milled with State-Of-The-Art Precision CNC Milling Machine.

• We Tension Your Saw to Your RPM Speed BEFORE Leaving Our Factory.

• Your Satisfaction - Completely Guaranteed.

B.H. Payne & Company, Inc. P.O. Box 90608 East Point, GA 30364 404 761-8711 Fax 404 761-5398 “Since 1890” E-mail: info@paynesaws.com

For Classifieds Call Your LBX REP at 1-800-315-9950

Web Site: www.paynesaws.com

The Original Lumberman’s Exchange n 15

AJD Forest Products

Premium Kiln Dried Hardwoods Northern Red Oak is Our Specialty Lake States Largest Producer of Industrial Lumber P.O. Box 629 • Grayling, MI 49738 • (989) 348-5412 • FAX: (989) 348-2500 Email: fred@ajdforestproducts.com • Web: www.ajdforestproducts.com

,9Ê -ÊUÊÓÊ- 7 -ÊUÊÓx]äää]äääÊ Ê 3400. Color - Yellow. VIN #: 440C334150T - Item ID-12091 Tom 800-315-9950 x604 1979 Timberjack 230 Forwarder - Very good condition for the age. Extra long frame. Tires: 67-34-25 at 60% Detroit engine (3-53).

Front Blade. Husky loader with grapple has excellent lift capacity. Currently loading hardwood logs. Great flotation - Item ID-12122 - Tom 800-3159950 x604 1980 DEERE 540B Grapple skidder - Swinging Grapple,

winch, front tires are 70% and rears are 85% or better, new batteries and a new seat. Item ID-12010 - Daren 800-3159950 x603 1981 (est) Clark 666 Cable Skidder - Unknown hours; Many recent improvements - New 6BT8.3 Cummins with 1500 hours; New Service Brake; New Parking Brake; 23.1 x 26 tires at 50%; Runs good; Very strong power train.

- Item ID-12054 - Tom 800-3159950 x604 1982 540B Grapple Skidder -

New engine and Transmission 2000 hrs on both, bottom center pin is new, top has a little wear, tires are at 40% power shift Transmission.

Pictures are coming soon Item ID-11569 - Daren 800-3159950 x603 1984 DEERE 540B - Cable Skidder, New 23x126 tires on rear. 8000 hrs - Item ID-11875 Daren 800-315-9950 x603 1984 DEERE 540B - Cable Skidder, 20,000# winch capacity, 7 ft blade, articulating, 4 cyl JD turbo

2009 Tigercat E620C Grapple Skidder Less than 1900 hours; 44” high flotation tires; Excellent condition; Seller shut down job; Save thousands over new 2011 unit. Hydrostatic drive; Strongest center section in market. You won’t find Tigercat skidders like this on the market! Don’t wait for long factory delivery… this unit can be pulling wood today! AR Item ID: 12073 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com 16 n

February 2011

1 Ê*," 1 / " dsl @ 90 hp, powershift 6 fwd/3 rev, 7 ft blade, 18,700# machine, 20,900# capacity front tires 50% reares 30% Item ID-11566 - Daren 800-3159950 x603 1984 John Deere 640D Cable Skidder - NEW TRANSMISSION; John Deere 6cyl Diesel Engine; 30.5 x 32 tires at 70%. Great flotation.

Winch works well; Runs good.

VIN #: 640DC513656 NC - Item

2008 Valmet 603 3-Wheeled Feller Buncher with Hot Saw; Only 3800 hours; 18” bunching saw head; Cummins 4-cyl engine with 130HP; Enclosed cab with heat/ air/stereo; 28” tires at 70%; Very good condition. Great thinning machine with zero turn radius. Economical to operate, engine burns 4.5 gal/hour. Has cut up to 14 loads/day.

Inexpensive to use and to transport. Call for more details. LA

Item ID: 12053 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

Visit us online at www.LBXonline.com!

â&#x20AC;&#x2DC;99 Tigercat 860 Stroke Delimber

Sawmill with Chipper

Item ID: 11886 Contact: Daren 800.315.9950 Ext. 603

Item ID: 11992 Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com

www.LBXonline.com

ID-12092 - Tom 800-315-9950 x604 1987 FORD L9000 - TWO BUNK OR 4 SETS OF BOSTERS, 366,000 mile, vin#A55219 tri axle, Cat 3406 diesel engine, 8LL transmission and 370 rears, prentice 120c - Item ID-11844 - Daren 800-315-9950 x603 1988 DEERE 648D - Front tire are 70% rear are 50%, Machine runs good - Item ID-11432 Daren 800-315-9950 x603

1988 FORD L9000 - 425 hp Caterpillar engine, 702,000 miles, 10 Spd transmission, air ride suspension, with a Prentice knuckleboom loader Item ID-11846 - Daren 800-3159950 x603 1989 CAT D5H TSK - 1989 CAT D5H TSK, WITH WINCH & FAIRLEED-GOOD PAINT-GOOD SHAPE, 6-Way - Item ID-12029 Daren 800-315-9950 x603 1990 FORD A64 Wheel Loader - 1990 FORD A64 Wheel Loader

Last chance for 2010 prices on portable sawmills.

Prices only good until February 28, 2011.

Call or go online for pricing.

800.553.0182

woodmizer.com

Copyright 2011, Wood-Mizer Products, Inc.

$ ! " $ " "! ! # # ! # " # ! # ! ! " $ ! ! # ( ! " ! ! # ! ( "! ! # # # ! $ " $ ! ! "! ! $ " # ! "! # $ "! " ! $ " " ! "! # ! ! ! " !! "

&! $ ' ! $ # $ " # ! $ $ " # # ! !# !$ ! % # ! ! ! $ ! "! ! !

" ! !

For Classifieds Call Your LBX REP at 1-800-315-9950

The Original Lumbermanâ&#x20AC;&#x2122;s Exchange n 17

For Firewood Production - Take Your Pick

The DYNA

SC-14 SC-16 OR

Both Give you High Production in an Affordable and Profitable Processor The SC-14 (pictured) Offers

6 *1 )%.% ' )0!-.(!).

6 *1!,"/' 3 , /'% +!, .%*) 6 '!2% '! *1!, +.%*)- 5 - *, %!-!'

6 ,#!

2 7 7 2 *# -%4!

6 -3 .* +!, .! *).,*' 6 /'' 1%.$ )3 +% &/+ 6 !.- /+ -.

6 ,* / .%*) ",*( 5 "/'' *, +!, $*/,

Packed and ready to go!

*Production rate may vary based upon log size, quality, power source used and operator skill.

toll free: 1.888.820.3962 local: 231.734.4433 fax: 231.734.3681 6228 60th Avenue, Evart, MI 49631

12 Years of Building Quality Machines!

Call the Dealer Nearest You!

DYNA Portable Sawmills

18 n

February 2011

Shell Forest Products, Harrodsburg, KY

Marty Shell 859.325.3694

Great Lakes Firewood, Twin Lake, MI

Dennis Blankenship 231.206.4073

Sensenig Repair, Mio, MI

Dennis Sensenig 989.848.8346

Warrick Hallet Carpentry, Glencoe, MN

Warrick Hallet 320.864.4340

PDG Sales, Medina, NY SC-16 Demo Model Available

Philip Graber 585.798.2969

North Country Hydraulics, Potsdam, NY

Ben Deschaine 315.842.0388

Riehlâ&#x20AC;&#x2122;s Sawmill Sales, Lykens, PA

Amos Riehl 717.365.3852

Lickity Split Firewood Equip., Stetsonville, WI

Clayton Szydel 715.550.1077

Timberline Landscape, Davis, WV

Bill Mollard 304.940.0749

Visit us online at www.LBXonline.com!

1993 Timbco 425

‘08 Terex TXL400-2 Front End Loader

2004 CAT 950GII FrontEnd Loader 950G currently has 18,111 hours on meter and is equipped with Hydraulic Coupler, Automatic Greasing System, Fire Suppression, and 20.5 x 25 Tires.

S/N 950GCAXR00269.

Equipped with GP bucket and adding new 23” tires before sale. Good working machine. OR

Item ID: 11582 Contact: Daren 800.315.9950 Ext. 603

5 yard capacity; Factory warranty; 747 hours; 26.5 tires; Weight 49,900 lbs; Discounted for quick sale. VT

Skylead Yarder

Item ID: 12114 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

www.LBXonline.com

Item ID: 11527 Contact: Daren Ph: 800-315-9950 x603

machine could be steam cleaned. All the cylinders have been packed. The radiator is rebuilt with new tanks. New starter has been installed. A couple of new guages were installed. New hinge pins and steering pins installed. All

with forks, - Item ID-12032 Daren 800-315-9950 x603 1991 Cat 518 grapple skidder - 1991 Cat 518 grapple skidder All belly pans and sheet metal were removed so the

Item ID: 12100 Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com

www.LBXonline.com

filters and fluids have been changed. Many hoses have been replaced. Winch has been rebuilt. Brakes work good. New exhaust muffler and pipe installed. Tires have about 35% tread. Seat is in good condition. New paint and decals. - Item ID-11832 - Daren 800-315-9950 x603 1991 Hydro Ax 221 - 1991 Hydro Ax 221 hour meter broken good tread good

USNR Edger Infeed

Mereen Johnson 424 Slat Bed Gang Ripsaw

Baker AX 12” Resaw

Fulghum 66” Chipper

Newman S382 Dbl Surface Planer

Jocar Linebar Resaw

Diehl Straight Line Ripsaw

250 HP WEG Softstarter

EXPERTLY BUILT AND SOLD ·by a company you can depend on!

8Vaa :g^X 9dhh Zmi# (%,

,%+"(')"'+%) ;Vm ,%+"(')"%%),

lll#WZc_dcZh#Xdb ZbV^a/ hVaZh5WZc_dcZh#Xdb ;^cVcX^c\ 6kV^aVWaZ For Classifieds Call Your LBX REP at 1-800-315-9950

The Original Lumberman’s Exchange n 19

on ducti ce o r P an est High t Mainten !! s D! Lowe RANTEE GUA

Trailer:

Tandem axle, 8’6” wide, 22’-30’ long, 11’8” high, 5-7 tons, Electric brakes.

Saw:

Superior Carbide Slasher - Cut wood instead of sharpen chains 36” to 60” diameter, 2 ga Carbide Slasher.

Engine:

50 to170 HP or PTO Drive with user’s tractor.

Hydraulics:

Commercial Shearing

Splitter:

35 - 72 tons, 3-5 second cycle time; 2, 4, 6, 8, 10, 12, 14 & 21 way pkg wedge.

Capacity - 4” to 27” Log diameter 0” to 48” Block Length Lifetime warranty on the entire splitter chamber.

Infeed Conveyor:

16” - 30” long Hydraulic powered.

Clean out Hopper: Get rid of bark and wood slivers before being conveyed away.

NEW GRAPPLE SYSTEM Now Available!

2040 ROGERS ROAD, PERTH, O N TA R I O K 7 H 1 P 9 CANADA

www.cord-master.com Email: cordking@cord-master.com

Today!

888-219-9663

running condition includes bush hog attachment - Item ID-11769 - Daren 800-315-9950 x603 1991 Hydro Ax 221 - John Deere, 4-cylinder Koehring 18” high speed disc saw 28L x 26 tires enclosed cab with heat and air - Item ID-11770 - Daren 800-315-9950 x603 1992 Ford L8000 with a 1996 Series XL235E Log Loader - 1992 Ford L8000, Serial # 1FDYW82A8NVA07578, TK Body Style, 307,000 miles, 225 hp, 7 speed Transmission, a/c, 410 gear ratio, hendrickson suspension 1996 Series XL235E Log Loader, new complete engine, 116 hp, 42” Log Grapple, - Item ID-12025 Daren 800-315-9950 x603 1992 GMC Truck with 1996 HM38 Production Drill - 29’ Drill Depth - Less than 200 hours since replacement of Bar & Barrell; 3” Kelly Bar; Funk 12,000 transmission - Less than 50 hours since rebuilt; Ford CSG 300 gasoline Engine; Rebuilt V-70 valve; Less than 100 hrs; Rebuilt

Meadows #2 Sawmill Item ID: 11086 Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com Hydraulic Pump Less than 100 hrs; Reinforced Table; Mechanical drive & Hydraulic bar; 18” Ring Gear Torques to 42,000 ft. lbs; Swing Base; Mounted on Tandem Axle Carrier; Auger Capacity up to 72” intermittent or 54” Constant; Carrier-1992 GMC/ Volvo Diesel Tandem Axle Truck - less than 200,000 mi.

- Item ID-12056 - Tom 800-3159950 x604 1992 Prentice 180D Log Loader - w/Cummins engine

1984 John Deere 640D Cable Skidder NEW TRANSMISSION; John Deere 6cyl Diesel Engine; 30.5 x 32 tires at 70%. Great flotation. Winch works well; Runs good. VIN #: 640DC513656 NC Item ID: 12092 Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com mounted on Pitts Trailer.

Good condition with 7,700 hours - Item ID-11434 - Daren 800-315-9950 x603 1993 FREIGHTLINER FLD12064ST - Detroit 60

DOUCET CLAMP CARRIER

8$L &%=E =nYgVja^X EdlZg Jc^i ')% 8aVbeh BVm# '%» adc\ m )'¹ jhVWaZ aZc\i]

(800) 319-8871

^c[d5XbZhVaZh#Xdb lll#XbZhVaZh#Xdb Exceptional PricesÊUÊExcellent Service series engine, 425 hp, 18spd transmission, 4.10 gear ratio, Barko 80 LOADER, Reman

In Stock and Available Now! New, Used and Refurbished Equipment

ALSO AVAILABLE:

58” Chipper (Rebuilt by Precision with a Precision warranty!)

FEATURED ITEMS: UÊ

Jeffrey 75hp Hog; Like New!

UÊ

58” Morbark Chipper

UÊ

6x6 Precision Screen with Cyclone

UÊ

Precision 58” 6-Knife Chip Pack

Authorized Dealer for:

UÊ

Barn Sweeps

UÊ

Vibrating Conveyors

UÊ

Debarkers

UÊ

Chip Units

UÊ

Soft Start Starters

UÊ

Electric Motors (New & Used)

Looking for Quality Sawmill Equipment—Look No More!

Winston Equipment

Mark Johnson (205) 522-0519 or Dan Hogan (205) 300-8447 For Classifieds Call Your LBX REP at 1-800-315-9950

The Original Lumberman’s Exchange n 21

1997 Bell Ultra C Feller Buncher Koehring 18â&#x20AC;? Hot Saw; 5073 hours; 28L tires with chains; Cummins 4 cylinder with 110HP; Joystick controls. Good condition. Great for thinning and very stingy on fuel. Plus this machine is easy to transport behind a one ton pickup.

Smart way to cut when on a tight budget. NC

Item ID: 12118 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

1979 JD 440C Cable Skidder Rebuilt Deere 4 cyl. engine; Manual Transmission, Bodygood, open cab w/ ROPS, dozer blade, diff locks, winch with cable; Tires - 16.9 x 30 4@30%; Hour meter shows 3400.

Color - Yellow. VIN #: 440C334150T Item ID: 12091 Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com TRANS Dec. 07, Both rear end recently rebuilt, full synthetic fluids in trans & rear ends. Full double frame. Full Locking

Rears. Well Maintained Truck Bed legnth 19â&#x20AC;&#x2122;6â&#x20AC;?, air ride suspension Front tires 60%, new set of drives - Item ID11641 - Daren 800-315-9950 x603 1993 Timbco 425 - With dangle head; new under-carriage and runs great. Has all books. Item ID-11582 - Daren 800-3159950 x603 1993 Timberjack 380 C Skidder - 23.1x26 rubber, Esco grapple, winch, enclosed cab, Cummins engine, rebuilt motor and transmission. - Item ID-11534 - Daren 800-315-9950 x603 1994 Cat 518C Skidder - The engine was rebuilt 3 months ago. An extra Lufkin winch is included. Has 3400 size tires on it. - Item ID-11856 - Daren 800-315-9950 x603 1994 John Deere 640E Cable Skidder - Screened in Cab, 23.1 x 26 tires Ice chains rear and Bear Paws on the front.

Exellent condition. Hrs are 11,000 - Item ID-11653 - Daren 800-315-9950 x603

1995 Hydro-Ax 411E - 1995 Hydro-Ax 411E, 7236 hours, 18â&#x20AC;? Koehring Sawhead, 28L-26 Tires, 4WD, inclosed cab w/ heat - Item ID-11673 - Daren 800-315-9950 x603 1995 International 4700 Grapple Truck - 14â&#x20AC;&#x2122; Brush body, 4-1/2 ton boom, DT 466 engine, spring suspension, 239902 on the odometer. - Item ID-11883 - Daren 800-315-9950 x603 1995 International 9300 Log Truck - Tri-axle, with 235,000 original miles. Has 2007 Hood 7000 loader. Drive tires are 98% stear tires are 50% and tag tires are 50%; Dayton hubs. 46,000 rears. - Item ID11502 - Daren 800-315-9950 x603 1995 Tigercat Model 720 FB w/5000 Bunching Head - 5638 Hours; Cummins 190HP; Tires: 28LX26; 2@80%; 2@30%; Paint Fair; Body - Good; Glass - Fair; Cutting Disc Good. Runs good.

Excellent value. - Item ID-12051 - Tom 800-315-9950 x604 1996 511EX Hydro-Ax With

0 / "OX s 0RENTICE 7) s

Ă&#x153;Ă&#x153;Ă&#x153;°Â&#x201C;Ă&#x2022;Â?Ă&#x152;Â&#x2C6;Ă&#x152;iÂ&#x17D;Â&#x2C6;Â&#x2DC;V°VÂ&#x153;Â&#x201C;Ă&#x160;UĂ&#x160;Ă&#x192;>Â?iĂ&#x192;JÂ&#x201C;Ă&#x2022;Â?Ă&#x152;Â&#x2C6;Ă&#x152;iÂ&#x17D;Â&#x2C6;Â&#x2DC;V°VÂ&#x153;Â&#x201C;

Multitek Firewood Processors Increase Your Productivity and Profitability Â&#x2122; FjVa^in :fj^ebZci id GZYjXZ ndjg AVWdg 8dhih Â&#x2122; 8^gXjaVg HVl dg 7Vg 8]V^c BdYZah Â&#x2122; , BdYZah id 8]ddhZ ;gdb Â&#x2122; EgdYjXi^dc GVi^c\h je id *#* ;jaa 8dgYh EZg =djg

Made in the U.S.A.

22 n

February 2011

Visit us online at www.LBXonline.com!

Bunching Saw Head - Hours est at 6800. Only 200 hours on factory reconditioned hydraulic motors and pumps.

Comfort cab with working air.

28L tires with chains at 50%.

Saw head has side pocket for cutting larger trees. Very well maintained machine. - Item ID12072 - Tom 800-315-9950 x604 1996 BARKO 275B - 6BTA Cummins Engine, 52” Rotobec Grapple - Item ID-12076 - Daren 800-315-9950 x603 1996 Freightliner 120c knuckleboom mounted behind cab, Cat 10 speed. Great for picking up logs and loading. Item ID-11435 - Daren 800-3159950 x603 1996 GMC Topkick - Includes 3126 Cat Automatic transmission. Has an Ampiroll 90L Hook Lift installed that has 12,500 pound capacity.

Truck runs well. - Item ID11101 - Daren 800-315-9950 x603 1996 Timbco 445B Leveling Feller Buncher - Quadco 22’ Hot Saw: Hour meter shows 6700 hours, but owner says meter was changed. Est.

hours are 13,000. Runs good.

Detailed maintenance history available. Motivated Seller.

- Item ID-12075 - Tom 800-3159950 x604 1996 Timbco 445-B w/ 22” Quadco Hot Saw - 1996 Timbco 445-B w/ 22” Quadco Hot Saw 40 degree tilt, Selfleveling, 4000 hours on old meter, on new meter 6530 hours, Ser:# FT4C 811 012496, Reman pumps were installed with the new hour meter. May 2003, Rebuilt Cummins 6CTA installed at 1000 hrs. June 2004, 2 idlers installed at 1800 hrs. Dec 2004, New Berco rails , pads and sprockets installed at 3400 hrs. Apr. 2006, New updated swing bearing and house tilt pins; bushing installed at 3950 hrs. Dec. 2006, Pump drive and implement pump rebuilt at 4200 hrs. Apr. 2007, New Cat track motor installed at 4550 hrs. Sept. 2007, 3500 hr. used swing box from Fraley installed at 4800 hrs. Jan 2008, All new track rollers on right side installed at 4950 hrs. Jan 2008, New saw head tilt flange

1997 CAT D5H TSKII Item ID: 12012 Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com installed at 5150 hrs. Sept 2008, Used boom from Fraley installed at 5230 hrs. Sept 2008, Stick cylinder resealed at 5280 hrs. Oct 2008, Main valve resealed at 5370 hrs. Oct 2008, Injector pump rebuilt at 5890 hrs. Jan 2009, Boom cylinder resealed at 6020 hrs.

Feb 2009 Shaft seals in pumps, tool cylinder resealed, and new AC pump installed at 6100 hrs. Aug 2009, New saw teeth installed at 6430 hrs. Nov 2009 - Item ID-12037 - Daren 800-3159950 x603

For Classifieds Call Your LBX REP at 1-800-315-9950

1997 CAT 515 Skidder Item ID: 11857 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com

1997 Bell Ultra C Feller Buncher - Koehring 18” Hot Saw; 5073 hours; 28L tires with chains; Cummins 4 cylinder with 110HP; Joystick controls.

Good condition. Great for thinning and very stingy on fuel. Plus this machine is easy to transport behind a one ton pickup. Smart way to cut when on a tight budget. - Item ID-12118 - Tom 800-315-9950 x604 1997 Cat 515 Skidder - Cab has A/C. Has 28L26 tires. Engine rebuilt 9 months ago. - Item

The Original Lumberman’s Exchange n 23

2001 CAT D5H TSK II Grapple & Winch

Adjustable Loading Ramp

Item ID: 12083 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com

Item ID: 12110 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com

ID-11857 - Daren 800-315-9950 x603 1997 CATERPILLAR D5H TSK II - 6,330 hours, 6/Way Dozer, Canopy w/Sweeps, Winch, Esco Single Function Grapple :U/C 60% approx., Pads 22in SBG R/P/B 50% SEGS 50% BAL, 50% Track Guards : Front/ Rear/ Side Screens, Grapples w/Ext, shipping dimensions weight 43,000lbs HEIGHT 10ft 5in LENGTH 17ft 10in WIDTH 8ft 9in - Item ID-12012 - Daren 800-315-9950 x603 1997 Husky XL235 on Mack Truck - Fair condition but runs good. Good back up loader.

PIPER’S Saw Shop 5 7 0 6 • 5 4 8 • 800 Promotional Pricing Offer Simonds Red Streak Hard Back 1-1/4” x .042 x 3/4” or 7/8” Length 13’2”

$14.27 each Tell us you saw it here!

24 n

February 2011

L im it e d T im e O n ly

Standard lever controls. Clean for its age. Priced to sell. Item ID-12066 - Tom 800-3159950 x604 1997 MACK CL713 with 18ft Petty built Pup trailer - 1997 Mack CL713 EZ427 replacement engine with 220k in Dec. 09, NEW! 18sp tran replaced by Mack Dec.08, 120C Prentice Loader, 22.5FT Rack, with Petty Built Pup Trailer (18.3ft).... Drive tires are at 40% and ster tires are rated at 50-60% - Item ID-12130 - Daren 800-315-9950 x603 1998 Bell Ultra THP Totally rebuilt, 7-1-08. engine,trans,drive motors, reconditioned a/c. New prime X 23x26 tires, new 3/4 rud multi-ring chains. New firestone rear tire. 30” dangle saw. Working daily. 5300 total hours. - Item ID-11679 - Daren 800-315-9950 x603 1998 PRENTICE 310E Machine is ready to work, overall condition “GOOD” Item ID-12033 - Daren 800-3159950 x603 1998 PRENTICE 620 WITH DENNHARCO DHT550 COMPUTERIZED MEASURINGTOPSAW-BUTT SAWFORESTRY CAB and 8,540 hours - Item ID-11888 - Daren 800-315-9950 x603 1998 Volvo truck w/160 Barco Log Loader - Volvo truck w/ Volvo diesel engine, 5 speed transmission - Air brakes 160 Barco Log Loader 4 cylinder Detroit diesel engine Hydraulic system is good Runs great - Item ID-11436 Daren 800-315-9950 x603 1999 BELL TF120B Feller Bunchers - One owner machine, it is on D5 cat tracks, Hours not known; meter not working. - Item ID-11480 Daren 800-315-9950 x603 2000 Daewoo with Denharco DM3500 stroke delimber 2000 Daewoo with Denharco DM3500 stroke delimber, this is a bank repo an is open to offers - Item ID-12026 - Daren 800-315-9950 x603 2001 CAT D5H TSK II - 8,102 hours, Cab with A/C, Six Way Blade, Fixed Esco 120” Grapple w/Winch, U/C 85%,

Visit us online at www.LBXonline.com!

GREAT ROAD - BUILDER 2001 Husky 235 Loader Mounted on Mack Truck

2002 John Deere 230C LC Excavator w/ Thumb

9600 hours; Lever Controls; Runs good; Good backup loader.

Priced to move! TX

Currently working; Only 5200 Hrs; Cab w/ heat and A/C - Works, Glass good; minor dents all around but works good; New chains and sprockets about 300 hrs. ago. TN

Item ID: 12066 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

rebuilt transmission - Item ID-12083 - Daren 800-315-9950 x603 2002 John Deere 230C LC Excavator with thumb Currently working; Only 5200 HRS; CAB W/ HEAT AND AC WORKS GLASS GOOD; MINOR DENTS ALL AROUND BUT WORKS GOOD; NEW CHAINS AND SPROCKETS ABOUT 300 HRS AGO - Item ID-12097 - Tom 800-315-9950 x604 2003 Cat 525B Grapple Skidder - S/N 3KZ00897, 10,496 Hours, EROPS, ESCO Grapple w/ winch, 30.5 X 32 Tires 60%.

Machine is in Tennessee - Item ID-11986 - Daren 800-315-9950 x603 2003 Morgan 2 Saw Trimsaw - This machine was bought new and never was really used, less than 50 hours if that, machine has never been painted it wwas just not used.

- Item ID-11904 - Daren 800-3159950 x603 2004 72” CSI R72 Circle Saw - Hydraulic. 20’ deck. Sold without the blade. New blade is additional $3500. Was over $40,000 new, 2 years ago. machine needs a new blade, 1500 hrs, it was used to cut logs - Item ID-12125 - Daren 800-315-9950 x603 2004 Barko 495MH Mounted on Trailer - 3280 hours, Hydraulics for a self

Item ID: 12097 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

propelled carrier; Bar Slasher Hydraulics; Cummins engine; Rotobec 5052 grapple. Very good condition. Poor paint.

Dry and tight. - Item ID-12065 Tom 800-315-9950 x604 2004 Cat 287B - 2004 year model, on tracks. 1390 hours.

Cab with A/C and hand controls. Tooth bucket. This is a one owner machine. - Item ID-11652 - Daren 800-315-9950 x603 2004 Cat 950GII Front End Loader - 950G currently has 18,111 hours on meter and is equipped with Hydraulic Coupler, Automatic Greasing System, Fire Suppression, and 20.5 x 25 Tires. S/N 950GCAXR00269. Equipped with GP bucket and having new 23” tires before sale. Item ID-12100 - Tom 800-3159950 x604 2004 DEERE 648G III - 1420 hrs, 50% on tires, Pins are tight - Item ID-12030 - Daren 800-315-9950 x603 2004 JD 648GIII Single Arch Grapple Skidder - Well maintained; 8200 hours engine rebuilt at 7100 hours; Price reduced to allow for new tires for buyer; Pulls strong.

Motivated Seller - Item ID-

2004 Tigercat 630C Grapple Skidder 12,295 hours but well maintained. Center section tight. Cummins C8.3 - 240 horse power; Dual Arch Tigercat Bunching Grapple; Steering tight; Some slack in front cradle; 34” Tires at 40% VIN #: 6302024 NC Item ID: 12093 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

12067 - Tom 800-315-9950 x604 2004 Tigercat 630C Grapple Skidder - 12,295 hours but well maintained. Center

2007 John Deere 700J LT Dozer Only 1155 Hours!

John Deere 6068 6cyl Diesel; 6 way blade, 10’ 6“ blade, EROPS, Corner bits and cutting edge good; Very clean and very good condition; No winch.

VIN #: T0700JX148380; Excellent value. NC Item ID: 12094 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

REAL TUFF BALER&BAGGERTM Save $$$ on Bedding—Bale it Yourself!

Electric or Diesel, Manual or Automatic

$13,907

BUILT TO LAST Real Tuff Baler Dimensions & Specifications

:Vhn id jhZ 7j^ai d[ ]^\] fjVa^in bViZg^Vah VcY ldg`bVch]^e =ZVkn Yjin id ZcVWaZ V WgdVY heZXigjb d[ WVa^c\ dei^dch :Vh^an adVYh Wn XdckZndg dg bVcjVa bZi]dY

- (2) Hydraulic Cylinders are controlled by using a two spool valve - 30 H.P. motor (220/440 volt 3 phase) starter not included - 25 G.P.M. Pump - 50 Gallon reservoir capacity - Only the highest quality industrial components are used

6)%0 89** -2(9786-)7

Phone: (325) 641-8300 Fax: (325) 643-3243

For Classifieds Call Your LBX REP at 1-800-315-9950

Manufactured by M & F Gauge & Specialty Co., Inc. PO Box 693 • Brownwood, Texas 76804 www.realtuffbaler.com

The Original Lumberman’s Exchange n 25

13*$&% '03 26*$, 4&--

2005 Bronco Model 2006 Pallet Nailing System Item ID: 12108 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com

48â&#x20AC;? Precision Chip Pack w/90â&#x20AC;&#x2122; Vibrating Conveyor Item ID: 12128 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com

section tight. Cummins C8.3 - 240 horse power; Dual Arch Tigercat Bunching Grapple; Steering tight; Some slack in front cradle; 34â&#x20AC;? Tires at 40% VIN #: 6302024 NC - Item ID12093 - Tom 800-315-9950 x604 2004 Valmet 425 Ex-10 Harvester - 4700 hours: Timbco self leveling carrier with Cat D6 side frames; Long reach harvesting boom of 35â&#x20AC;&#x2122;; Valmet 360 harvesting head is fast and efficient; Well maintained with service history. - Item ID-12074 - Tom 800-315-9950 x604 2005 CAT 525B Grapple Skidder - 8100 hours, EROPS

w/ AC Single Arch w/ Grapple & Winch tires are 25% - Item ID-12028 - Daren 800-315-9950 x603 2005 JD 650J Dozer w/ Winch - 3200 total machine hours, 25 hrs on complete new severe duty bottom and complete service, and winch update by JD dealer. Optional lights package. Heater, air suspension seat. No tears in upholstery, no dents in grille.

Very nice dozer. The winch update included an updated pump and gears. Pulls great!

- Item ID-12120 - Tom 800-3159950 x604 2005 John Deere 550J - This

JOCKEY GRINDER OWNERS!!!

5IF 4FDSFU

"SF XFBS QMBUFT DPTUJOH ZPV UPP NVDI NPOFZ

â&#x20AC;&#x153;EZ-SLIDEâ&#x20AC;? TOOTH STOP */530%6$*/( & TOOTH REST

5IF QBSUT UIBU UPVDI UIF UPPUI EPOÂľU NPWF

*O 4UPDL GPS ' BOE TUZMF TBXT # BOE TUZMF DPNJOH TPPO

This Patented, Spring Loaded Design â&#x20AC;˘ Allows for EZ sliding of the grinding wheel to the tooth. â&#x20AC;˘ Eliminates the sticky divots of the old style wear plates. â&#x20AC;˘ Saves you time and money with better control of the sharpener and more consistent sharpening of your saw teeth.

The high quality stainless steel wear plate contacts the tooth as the aluminum frame and grinder move to sharpen the tooth.

This is one of the best innovations in our industry to come along in years. Where was this 30 years ago?

Kevin Mueller Mueller Brothers Timber Old Monroe, Missouri

Our sawyers say they will not go back to the old style parts.

Joe Nowak Lumberjack Hardwoods Menominee, Michigan

5IF &; 4-*%& IBT TBWFE NBOZ IBQQZ DVTUPNFST UJNF BOE NPOFZ

Call 1-800-582-0470 TODAY 26 n

February 2011

www.menomineesaw.com Â&#x2DC;vÂ&#x153;JÂ&#x201C;iÂ&#x2DC;Â&#x153;Â&#x201C;Â&#x2C6;Â&#x2DC;iiĂ&#x192;>Ă&#x153;°VÂ&#x153;Â&#x201C;

Visit us online at www.LBXonline.com!

has only 1981 hours, has a cab with A/C, 24” pads, rear cab screens and front limb risers.

The pins and bushings have been turned and the sprockets have been replaced. - Item ID-11661 - Daren 800-315-9950 x603 2005 Prentice 280 TMS Loader - Less than 1000 hrs. Cummins engine and a 42” Hultdins grapple. Comfort cab with AC/Heat/Stereo. CTR 42IP Sawbuck included. This as close to buying a new loader as you will get! Customer never got job the machine was intended for. Fantastic value.

Ready to work! TN - Item ID12121 - Tom 800-315-9950 x604 2005 Prentice Model 410E w/ TMS Package - 2730 Hours; 52” Grapple; CTR Model 450 Pull Through Delimber; Prentice TMS System with III Series Trailer; Very good condition.

Well Maintained. KY - Item ID12079 - Tom 800-315-9950 x604 2005 Valmet 890.2 20 ton Forwarder - 10,450 hours.

Rear Bogeys recently sealed.

8 wheeled. Good condition and well maintained. Eco Tracks. Best price available for a 20 ton Forwarder in this condition. Ready to go to work TODAY! Motivated Seller!

- Item ID-12068 - Tom 800-3159950 x604 2006 Barko 495 Crawler Loader - 48” Hydraulic Cab Riser; 32’ reach; Totally gone through with new pins bushings and engine service.

9463 hours. Undercarriage is 90% with 28” pads. Has delimber and bar saw slasher hydraulics. - Item ID-12102 Tom 800-315-9950 x604 2006 Barko 495 Crawler Loader - 5008 hours; Unit has 48” hydraulic cab riser that totally folds forward for legal height transport; Undercarriage is 90% with wide 36” pads. Equipped with both delimber and bar saw hydraulic package. 32’ reach and Rotobec 48” grapple.

Excellent condition for yard

1987 CAT D4H TSK w/Winch and Forestry Package

1990 Ford A64 Wheel Loader

Item ID: 12026 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com

Item ID: 12032 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com

machine or working at set.

Priced to sell. - Item ID-12103 Tom 800-315-9950 x604 2006 Cat 420E Loader Backhoe - Comfort cab with AC/Stereo; Extend-a-hoe; 400 hours; Aux hydraulics; 4 WHEEL DRIVE; 24” back hoe bucket - Item ID12071 - Tom 800-315-9950 x604 2006 Cat D6R Dozer with Semi-U Blade - 2821 Hours;

24” pads. 12’4” Blade, Power tilt blade, Runs and operates good. Under carriage good, sprockets, rails, and pads good; Cab & Air; Cat C-9 Diesel Engine. - Item ID-12058 - Tom 800-315-9950 x604 2006 JD 700J Dozer with Winch - Very clean dozer with winch and low hours of 1869.

Enclosed cab with comfort

Our New Shaving Mills <^kZ Ndj

Vi Vc

Big Production Affordable Price!

Our New Shaving Mills Give You Big Production at an Affordable Price!

UÊ9 ÕÀÊV ViÊ vÊx¿Ê ÀÊn¿Ê `i Ã

Ndjg X]d^XZ d[ * dg - bdYZah UÊ* ÜiÀi`ÊLÞÊ Þ`À>Õ VÊÀ> ÌÞ«iÊÃÞÃÌi EdlZgZY Wn ]nYgVja^X gVb"ineZ hnhiZb UÊ i>ÌÕÀiÃÊÌÜ Ê ÀÊÌ ÀiiÊ{Ó¸Ê }Ê`Þ > V> ÞÊ L> > Vi`Ê i>`ÃÊÜÉnÊ ÛiÃÊ«iÀÊ i>`

;ZVijgZh ild dg i]gZZ )' adc\ DYNAMICALLY BALANCED ]ZVYh UÊ i>`ÃÊ>ÀiÊ ÊV ÃÌ> ÌÊ«À `ÕVÌ ]ÊÀi}>À` iÃÃÊ v l^i] -"`c^kZh eZg ]ZVY Ê L ÝÊÌÀ>Ûi Ê` ÀiVÌ

=ZVYh VgZ ^c XdchiVci egdYjXi^dc! gZ\VgYaZhh d[ Wdm igVkZa UÊ >V Ên¸Ê` > iÌiÀÊ i>`Ê ÃÊ« ÜiÀi`ÊLÞÊ>ÊxäÊ «ÊÊ Y^gZXi^dc i iVÌÀ VÊ Ì À :VX] - Y^VbZiZg ]ZVY ^h edlZgZY Wn V *% ]e ZaZXig^X bdidg UÊ Ê«À `ÕVÌ ÊpÊ1«ÊÌ ÊxäÊVÕL VÊÞ>À`ÃÊ«iÀÊ ÕÀt

=^\] egdYjXi^dc ¶ Je id *% XjW^X nVgYh eZg ]djg

Expertly builtBUILT and sold

by SOLD a EXPERTLY AND

·by a company youdepend can depend company you can on.on!

> Ê À VÊ ÃÃÊ­iÝÌ°ÊÎäÇ®

8Vaa :g^X 9dhh Zmi# (%,

800-241-8983 ,%+"(')"'+%) ;Vm ,%+"(')"%%),

>cYjhign»h Bdhi IgjhiZY HdjgXZ

ÇäÈ ÎÓ{ ÓÈä{ÊÊUÊÊFAX 706-324-0047

lll#WZc_dcZh#Xdb ZbV^a/ hVaZh5WZc_dcZh#Xdb ;^cVcX^c\ 6kV^aVWaZ ÜÜÜ°Li iðV ÊÊUÊÊi > \ÊÃ> iÃJLi iðV ÊÊUÊÊFinancing Available For Classifieds Call Your LBX REP at 1-800-315-9950

The Original Lumberman’s Exchange n 27

1989 CAT D5H TSK Item ID: 12029 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com

2006 JD 700J XLT Dozer 1075 Hours. Excellent condition. Very well maintained. Comfort cab with air and stereo.

Work light package.

Undercarriage at 90%.

One owner machine.

Ready to sell.

Item ID: 12073 Contact: Tom 800.315.9950 Ext. 604

2004 Deere 648G III Item ID: 12030 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com

28 n

February 2011

www.LBXonline.com

package. Runs strong and is priced to sell. Excellent value and worth a look. NC - Item ID12101 - Tom 800-315-9950 x604 2006 JD 700J XLT Dozer - 1075 Hours. Excellent condition.

Very well maintained. Comfort cab with air and stereo. Work light package. Undercarriage at 90%. - Item ID-12073 - Tom 800-315-9950 x604 2006 JD 748GIII Dual Arch Skidder - Approx 8400 hours; Very well maintained; 30.5 tires at 40%; Sweda axles; Winch. Unit working everyday.

- Item ID-12117 - Tom 800-3159950 x604 2006 NEW Fuchs 460 Log Loader - 44’ Reach. 212 Demo Hours. Rotobec 5012 Grapple.

Hydraulic raising cab for excellent operator visibility.

Priced well below dealer cost.

Motivated Seller. Great storage yard machine. - Item ID-12064 Tom 800-315-9950 x604 2006 PRENTICE 384 mounted on a Mack Truck - 4600 hours, has been on a yard since 2006 - Item ID-12008 - Daren 800-3159950 x603 2007 John Deere 700J LT Dozer - 1,155 Hours; John Deere 6068 6cyl Diesel; 6 way blade, 10’ 6” blade, EROPS, Corner bits and cutting edge good; Very clean and very good condition; No winch. VIN #: T0700JX148380; Excellent value. - Item ID-12094 - Tom 800-315-9950 x604 2007 Tigercat M760 Mulcher Cat C13 TAAC Tier III engine.

415 HP. Equipped with FAE mulching Head model 500/ U225C. Excellent condition.

Rebuilt engine, replaced FAE rotor, replaced FAE head, new starter and batteries installed in 2009. INCLUDES: Spare Components - Radiator, fan controller computer, 12 blade fan, hydraulic, engine oil, and air filters, FAE teeth-approx.

30; FAE bolts-approx. 50; nordlock washers for FAE, FAE tool-holders, FAE drive belts, owner’s manuals, service manual, parts manual, C13 engine manual - Item ID-12132 - Tom 800-315-9950 x604 2008 JD 2554 Harvester with Waratah 624 Processing Head - 4700 hours; Waratah 624 Harvesting Head. Great for both in woods harvesting or deck processing. Get more value from every stem! Motivated Seller! Well maintained. Below market

price. - Item ID-12087 - Tom 800-315-9950 x604 2008 Terex TXL-400-2 Front End Loader - 5 yard capacity; Factory warranty; 747 hours; 26.5 tires; Weight 49,900 lbs; Discounted for quick sale. VT - Item ID-12114 - Tom 800-3159950 x604 2008 Timbco/Valmet 445FXL with Quadco 22” Saw Head - Latest Model of Tracked Feller Buncher from Valmet with Heavier Komatsu undercarriage. 3200 hours.

Excellent condition. 28” double grousers. Leveling cab.

360 degree rotator on Quadco saw head gives great flexibility in production. Customer selling due to job changes.

Great value! - Item ID-12119 Tom 800-315-9950 x604 2008 Valmet 603 Three Wheeled Feller Buncher - 3700 hours; 18” Bunching Saw Head; 28” tires at 70%; Rear tire 20%; Cummins 4-cyl, 130 HP uses 4.5 gal/hr.; Very good condition. Excellent thinning machine - Item ID-12053 - Tom 800-315-9950 x604 2008 Valmet 860.3 Forwarder - 16 ton capacity. Low hours 2850. Excellent condition and well maintained. HD grapple; Engine guard; 8 wheeled; Blade; Tracks do not come with machine. Customer job changed. Must sell for what is owed. Great value! Uses 3.8 gal/hour. - Item ID-12133 - Tom 800-315-9950 x604 2009 Tigercat E620C Grapple Skidder - Less than 1900 hours; 44” high flotation tires; Excellent condition; Seller shut down job; Save thousands over new 2011 unit.

Hydrostatic drive; Strongest center section in market. You won’t find Tigercat skidders like this on the market! - Item ID-12106 - Tom 800-315-9950 x604 225A Timberjack Skidder - In ready to work condition. 1986 year model with a 353 Detroit engine. - Item ID-11991 - Daren 800-315-9950 x603 230 Timberjack Forwarder Late 70’s model forwarder. Is powered by a Detroit 353, has a Husky Brute loader, tire size

Visit us online at www.LBXonline.com!

2008 Vermeer BP8000 Bale Processor BP 8000 bale processor.

Machine has big tires and remote for cab. It is not a final cut machine.

Excellent condition. MS

Item ID: 12099 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

is 24-5-32. Engine completely rebuilt 3000 hours ago. - Item ID-11993 - Daren 800-315-9950 x603 510 International Wheel Loader - Please call for information. Photos coming soon. - Item ID-11990 - Daren 800-315-9950 x603 “518 Cat Grapple Skidder - Late 80’s 4WD Drive; Cat winch, maintained machine.; 30.5 x 32 Tires, 95% rubber.

130-hp, all pins are good.

- Item ID-11078 - Chris 800.315.9950 x600 98’ 620 Prentice Track Cutter - Quadco saw / 80% under carriage / rebuilt finals / John Deere engine 6,000 hrs. on it. - Item ID-10479 - Chris 800.315.9950 x600 Barko 160A with Chop Saw 1992 year model. Chop Saw 2000 or 2001 included. - Item ID-11117 - Daren 800-315-9950 x603 “Bell Super T - 1992 year model, serial number BCH3953, 23.1x26 tires. Needs a head - Item ID-11898 - Daren 800-315-9950 x603 Case 580 Fork Lift - Mid 70’s Fork Lift 580 Case, High Lift, Good Condition - Item ID11493 - Daren 800-315-9950 x603 Cat 518 Grapple Skidder - 1980 year model with grapple, winch and canopy. Hours

‘08 JD 2554 Harvester w/

Waratah 624 Processing Head 4700 hours; Waratah 624 Harvesting Head.

Great for both in woods harvesting or deck processing. Get more value from every stem!

Motivated Seller! Well maintained. Below market price. LA

Item ID: 12087 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

unknown; no meter. - Item ID-11103 - Daren 800-315-9950 x603 Cat 518C Grapple Skidder - 1995 year model. With grapple & winch. 12000 hours - 200 hours since engine and transmission were rebuilt.

Really good condition. Tires are 28 X 46. Open cab. - Item ID-11293 - Daren 800-315-9950 x603 Cat 545 Grapple Skidder - 2003 year model. Please call for information. - Item ID-10996 Daren 800-315-9950 x603 Cat 545 Grapple Skidder - 2004 year model. Call for more information. - Item ID-10997 Daren 800-315-9950 x603 CAT D4H TSK WITH WINCH AND FORESTRY PKG - CAT D4H TSK WITH WINCH AND FORESTRY PKG. Is a year 1987. Only 7500 original hours. - Item ID-12024 - Daren 800.315.9950 x603 Caterpillar D6R - Caterpillar D6R with winch, hours 8211, s/n 5LN00696 - Item ID-11906 Daren 800-315-9950 x603 DEERE 440 - S/N #090370, with a winch - Item ID-11431 - Daren 800-315-9950 x603 Gyro Trac GT25 - Machine has

1278 hours. - Item ID-11801 Daren 800-315-9950 x603 Hood 28000 Loader - Year model 2004; 72” hot saw; only 340 hours. - Item ID-11418 Daren 800-315-9950 x603 John Deere 240 - Skid Loader 52HP 1785 Hours. Excellent Condition. 12x16.5 Tires 75% More Details Soon. THANKS FOR LOOKING. - Item ID-11799 - Daren 800.315.9950 x603 John Deere 290 - With Elite processing head, 2 roller. 4

For Classifieds Call Your LBX REP at 1-800-315-9950

cylinder John Deere engine.

Very good undercarriage. Item ID-10934 - Daren 800-3159950 x603 John Deere 640E Skidder 1993 year model, 6 cylinder, powershift transmission, no leaks - Item ID-11989 - Daren 800-315-9950 x603 John Deere 643D - 1995 year model. 22” kohring sawhead. tires are 70%, Motor is new replaced last month, 8000 hours on machine. heated

Comin gS 4 New oon Mode ls

Beaver Model 18

The Original Lumberman’s Exchange n 29

and A/C cab. - Item ID-11414 Daren 800-315-9950 x603 John Deere 648D Skidder - Has new hydraulic pumps, has winch, runs great, 8332 hours.

- Item ID-11711 - Daren 800-3159950 x603 Koehring Hot Saw - 22” head.† Very good condition. The bottom pin is 2” around and 12” long. The top pin is 2-1/2” around and 4-3/8” long. - Item ID-11469 - Daren 800-315-9950 x603

Metavic Log Loader trailer Log loader trailer is 2 years old, has 12’ boom with a 30” grapple. 12’ bunk, will hold 20” logs/polewood, has 6500lb winch, 110’ 5/16” cable. - Item ID-11362 - Daren 800-315-9950 x603 NEW Pitts LB52-24D TriAxle Detach Trailer - 2008 Model. No miles. Black paint.

Has Pony motor, Fold out outriggers, 5 position neck, D rings, and covered wheel

wells. Priced to sell! NC - Item ID-12089 - Tom 800-315-9950 x604 NEW Pitts LT42-8UL 8” Center Drop Log Trailer - Width: 8’6”; Color: Black; Additional Info: 4-Bolsters - Log Trailer Length: 42’ Model #: LT40-8UL - Log Trailer Weight: 8,900 FOB: NC - Item ID-12090 - Tom 800-3159950 x604 Serco 8500 Log Loader - Model 8500, Not mounted - Item ID12007 - Daren 800-315-9950

CARDINAL WIRELESS 5775 Park Plaza Ct. Indianapolis, IN 46220 317 577 9944 www.cardinal-wireless.com

FREE shipping for minimum 3 units

GPS TRACKING

TWO-WAY RADIOS

for Truck Fleets

Up to fifteen miles of loud, clear range and NO airtime charges.

x603 Skylead Yarder - $40,000 in new parts. Brand new motor 300 hours ago; new turbo, injector pump, new lines, new radios, new batteries, new haulback brake, new drive chain, strawline brake, etc.

In good condition. 1999 year model. - Item ID-11527 - Daren

NEW - Pitts LB52-24D TriAxle Detach Trailer 2008 Model. No miles.

Black paint. Has Pony motor, Fold out outriggers, 5 position neck, D rings, and covered wheel wells.

Priced below market. NC

Item ID: 12089 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

GATEGUARD®

Remote Gate Control and Radio Communication

ASSET TRACKING

for Construction Equipment, Generators, Trailers and Rental Equipment

HEADSETS

for Hearing Protection

Call today for more information:

800-332-3268

www.cardinal-wireless.com 30 n

February 2011

NEW Pitts LT42 8UL 8” Center Drop Log Trailer Width: 8’6”; Color: Black; Additional Info: 4-Bolsters - Log Trailer Length: 42’ Model #: LT40-8UL - Log Trailer Weight: 8,900 FOB: NC Note: Photo shows exact trailer but painted red. Unit available is painted black.

Item ID: 12090 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com Visit us online at www.LBXonline.com!

800-315-9950 x603 Tigercat 860 Stroke Delimber - 1999 year model bought new in 2001. Excellent condition and ready to work. Delimber is a Denharco DM3500. Machine is a one owner, one operator machine. - Item ID-11886 Daren 800-315-9950 x603 Timbco 425 Feller Buncher 1996 year model with Quadco hot saw. 40” tilt, new pump and drive motor. Great shape.

- Item ID-11031 - Daren 800-3159950 x603 Timbco 425 with Bar Saw Head - 2002 year model powered by a 260-hp Cummins engine. Has 33” Timbco Bar saw head. Has 3300 hours, in good condition and very work ready. - Item ID-11340 - Daren 800-315-9950 x603 Timberjack 380 - Dual function grapple with winch. 30.5.32 rubber. 453 Detroit diesel. Item ID-11072 - Daren 800-3159950 x603 Timberjack 380 Grapple Skidder - Esco grapple, 453 Detroit Engine. Engine and transmission are strong, pins are tight. 1980 Year model. Item ID-10950 - Daren 800-3159950 x603 Trim All “All in One” Trim Saw Attachment - Order through Lumberman’s Exchange at great prices. This attachment can replace the bucket on a skid steer, loader/backhoe, or farm loader and turn it into a trimming saw at a fraction of the cost of large trimming machines. Reach from 23’ to 75’ depending on model.

3 models to choose from.

Optional rotating saw and swing out arm for maximum flexibility and greatest performance. Clear power lines, dead limbs, or widen right of ways with 24” saw blade with carbide tips. - Item ID-12105 - Tom 800-315-9950 x604 MISCELLANEOUS Dip Tank System - Installed in 1996. Tank is 10’ wide X 20’ long X 94” deep. Infeed deck is 21’ long X 13’6” wide.

Infeed rollcase is 20’ long X 66” wide. Infeed drive is 10-hp.

Outfeed rollcase is 45’ long

'JOBODJOH "WBJMBCMF

SHRINK WRAP FIREWOOD/WASTEWOOD

Sell Your WOOD – $300/cord or More!

Double or triple your profits by shrink wrapping wastewood - forewood with WOOD-PAKer! Attractive various size packages can be obtained with our high production, easily operated and affordable machines. Eight machines available. The ideal equipment for producing square bundles-palletizable for ease in storage and transporting.

Inquire for free details. Video and Package samples at nominal fee.

B & B ManufacturingÊUÊÎääÇÊ7iÃÌÊ, ÛiÀÊ, >`ÊUÊ" i> ]Ê 9Ê£{ÇÈä

4OLL &REE > \ÊLL v}JëÀÞ iÌ°V ÊUÊ7iL\Ê ÌÌ«\ÉÉ i°Ã«ÀÞ iÌ°V ÉHLL v}É

1998 Prentice 310E

Morbark 58 Chipper

‘78 Timberjack 225

Item ID: 12033 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com

Item ID: 12082 Contact: Daren 800.315.9950 Ext. 603

Item ID: 12031 Contact: Daren 800.315.9950 Ext. 603

X 66” wide. 2 storage decks, one is 20’L X 11’3”W the other is 20’L X 10’3”W. Hydraulic unit is 50-hp, 3 phase. New cost $230,000. (Building in photos is not included.) - Item ID-10850 - Daren 800-315-9950 x603 Hough 65 Motor for Salvage - w/ a good cummins CN6 motor & converter. - Item ID10480 - Contact-Chris WOODS - Phone- 800.315.9950 Ext- 600

www.LBXonline.com Milling machine - Cincinnati #2 vertical milling machine. - Item ID-11797 - Daren 800.315.9950 x603 MOULDERS Fukami 6 head moulder Fukami 6 head moulder NTX150 - Item ID-11753 - Daren 800-315-9950 x603 PALLET MACHINERY 2005 Bronco Model 2006 Pallet Nailing System - Pallet nailing system with roll-out. Was used

For Classifieds Call Your LBX REP at 1-800-315-9950

www.LBXonline.com to build 48”x40”. New in 2005.

One owner. - Item ID-12108 Daren 800-315-9950 x603 Bob Hanna Double Head Pallet Notcher. Item ID-11815 - Daren 800-315-9950 x603 Hawk Bandsaw Dismantler - Powered by a 3-phase, 15hp electric motor. Has a 64” table. Can be a one or twoman machine. Large tires for extended blade life. Capacity is 50-80 pallets per hour.

The Original Lumberman’s Exchange n 31

Manufactured by Saw Service & Supply Co. - Item ID-11065 Daren 800-315-9950 x603 Mark I Pallet Dismantler - Oneman, 62” table Mark I - Item ID-11811 - Daren 800-315-9950

x603 Pallet Chief lll nailer auto nailer. - Item ID-11812 - Daren 800-315-9950 x603 Smart Bandsaw Dismantler 64” table. Two-man operation.

Less than 100 hours on a

complete rebuild. Powered by a 15-hp 3-phase motor.

Push button table height adjustment. 400-700 pallets per 8 hour shift. Manufactured

by Smart Products. - Item ID11066 - Daren 800-315-9950 x603

2007 TIGERCAT M760 MULCHER

2007 Monarch Dynasty Motor Home Unbelievable package!

Less than 30,000 miles!

Luxury at its’ best. Came to seller from Bank Repo. Allison Automatic Transmission; Cummins Diesel. Surround sound entertainment with 3 TV’s! This is a top of the line motor home for a price you won’t believe.

Call us for more amazing details of the features.

If you want to cruise the highways....here is the way to go! NC

Cat C13 TAAC Tier III engine. 415 HP. Equipped with FAE mulching Head model 500/U225C. Excellent condition.

Rebuilt engine, replaced FAE rotor, replaced FAE head, new starter and batteries installed in 2009. INCLUDES over $15,000 of Spare Components such as Radiator and fan controller computer. Plus owner’s manuals, service manual, parts manual, C13 engine manual. CO

Item ID: 12140 Contact: Tom 800.315.9950 Ext. 604

Item ID: 12132 Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com

www.LBXonline.com

32 n

February 2011

1996 511EX Hydro-Ax w/Bunching Saw Head Good working unit for moderate applications.

Only 200 hours on factory reconditioned hydraulic motors and pumps.

Comfort cab with working air. 28L tires with chains at 50%. Saw head has side pocket for cutting larger trees. Very well maintained machine.

Approx. 6800 hours.

Owner ready to sell. WS

Item ID: 12072 Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com

Third Man Inc. Pallet Nailing Unit - Third Man Pallet Nailing Unit, Model TMN-075, S/N PJ0075, Handles Up To 48 x48, Does 3 Or 4 Stringer Pallets. Item ID-11890 - Daren 800-3159950 x603 Third Man Nailer with Stacker - Third Man Nailer with Stacker - Item ID-11809 - Daren 800-315-9950 x603 Williams 200 H.P. Hammermill Grinder - This 200 H.P. hammermill was recently removed from a sawmill where it was being used to grind wood waste to boiler fuel for several large industrial customers. This grinder has a very large capacity and would work well in the grinding of whole pallets because it has a top opening size of 27” X 52”. This grinder is powered by a 200 H.P. electric motor that operates at 1200 RPM and uses 460 voltage for its power. The electric motor is direct coupled to the grinder through a shear coupler to prevent damage from being done to the grinder.

2004 Valmet 425 EX-10 Harvester 4700 hours; Valmet 360 Proc. Head. Fast and efficient measuring. In woods or at the deck.

Leveling machine for working steep grades. 35’ reach makes this a great thinning machine. Easily does 5th row thinning.

Low fuel consumptions too! See more photos at www.lbxonline.com

Item ID: 12074 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

Visit us online at www.LBXonline.com!

This machine is equipped with a bar type screen that determines the size material the machine is going to produce. Of course this screen can be changed to achieve many different size materials being produced from the same machine. This machine comes with a size # 6 motor starter and 600 amp breaker which are enclosed in a large free standing electrical cabinet.

This is a very nice clean unit and would work ideally for many grinding applications.

- Item ID-12011 - Daren 800.315.9950 x603 PLANERS Complete Planer Mill - Yates American A20, 8 knife, belt driven with top and bottom profile; 54â&#x20AC;? McDonough Resaw; heaby motorized conveyor chain; XL ripper; Goff cleat machine; 2 double end trimmers; DeWalt radial arm saw. Includes all motors and dust collection systems. Item ID-10994 - Daren 800-3159950 x603 Newman 4-sided planer - This 6-3/4â&#x20AC;? x 16â&#x20AC;? capacity 4 sided planer has been updated with separate motors for the feed, top head, bottom head, and both of the side heads. It has sat idle for some time but is restorable. I overhauled the side heads and they have been stored inside. This machine differs from most 500 models in that it has 9â&#x20AC;? feed rolls rather than 8â&#x20AC;?. - Item ID-11729 - Daren 800-315-9950 x603 Newman S682 two sided planer. 6â&#x20AC;?x30â&#x20AC;? capacity. 6 knife heads - 30â&#x20AC;? Width, 6â&#x20AC;? max. & 1/4â&#x20AC;? min. thickness cap., shortest stock 46â&#x20AC;? (not butted) 20â&#x20AC;? butted; manual thickness adjustment.

Equipped with: 40 HP - 3,600 RPM Direct drive motor to top head, 20 HP - 3,600 RPM direct drive motor to bottom head, both heads with NEWMAN 6-knife straight cutterheads, 7â&#x20AC;? max. cutting circle. - Sectional top chipbreaker with 3â&#x20AC;? wide hardened steel sections, 1-1/2â&#x20AC;? max. travel. 10 HP Mechanical feed drive, variable feed speed

1993 Morbark 1200 Tub Grinder Item ID: 12126 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com

from 50 - 150 FPM, feed system with (6) 8â&#x20AC;? dia. feed rolls, (2) top infeed rolls sectional with 2â&#x20AC;? wide segments allowing 5/16â&#x20AC;? independent yield and 1-1/2â&#x20AC;? yield of the entire roll, max. cut top 1-1/2â&#x20AC;? and 1/4â&#x20AC;? bottom. - Item ID-11747 - Daren 800-315-9950 x603 Yates American planer - 18â&#x20AC;? model J18, 2-speeds, 3-phase, new knives, +/-.005 on the cut, ready to work! - Item ID-11860 Daren 800-315-9950 x603 PORTABLE SAWMILL Timber Harvester Sawmill 5600hrs runs and works great, cuts 30â&#x20AC;?wide and 21â&#x20AC;&#x2122;long 30hp Deutz motor fully hydraulic mill - Item ID-11895 - Daren 800-315-9950 x603 RECYCLING EQUIPMENT 1990 Morbark 16 Chip Harvestor new Cat engine whole tree chipper with 16â&#x20AC;? diameter capcity, cab and grapple loader, grapple loader is in good condition, 1000 hours on new Cat engine, only 3500 original hours, new clutch, new belt, new bearings, needs some paint, some dents in the cage, but overall mechanically sound whole tree chipper. - Item ID11863 - Daren 800-315-9950 x603 1991 Haybuster IG-8 tub grinder - 1100 hrs, 2â&#x20AC;? screens, john deere diesel engine, swing hammers have been replaced, discharge belt has been recently replaced, only used to regrind bark - Item ID-11864 - Daren 800-315-9950

CAT D4H TSK w/ Winch & Forestry Pkg. 0/-: 03*(*/"- )0634 Item ID: 12024 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com

x603 1993 Morbark 1200 Tub Grinder - rebuilt by Morbark in 1999. Equipped with grapple, 650-hp Cat Diesel engine, rebuilt clutch, rebuilt hammermill, oversized hammermill and wider-longer conveyor. 9500 hrs approx. Item ID-12126 - Daren 800-315-

2004 Morbark N-Viro Mulch 2000 Item ID: 12109 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com

9950 x603 1994 Duratech HD8 tub grinder - Has only 204 hours

SAWMILL EXCHANGE North America's Largest Source of Used Portable Sawmills.

Over 800 Ads:

EdgiVWaZ HVlb^aah! 8dbbZgX^Va HVlb^aah! EVaaZi VcY 8jihidX` BVcj[VXijg^c\! ;^gZlddY BVcj[VXijg^c\!

8]^ee^c\ VcY <g^cY^c\! Ig^bbZgh! 9ZWVg`Zgh! 9gn @^ach! :Y\Zgh! GZhVlh! G^ehVlh VcY <Vc\ HVlh! AdVYZgh! BdjaYZgh VcY EaVcZgh! HVlYjhi 7adlZgh VcY 8]V^ch!

8dckZndgh$IgVch[Zgh$9ZX`h$<gZZc 8]V^c! Gdaa^c\ HidX`! and Much More!!

The Place to Sell Your Equipment 8Vaa Jh [dg V ;gZZ A^hi d[ DkZg -%% 6Yh dg id HZaa Ndjg :fj^ebZci#

800-459-2148 JH 8VcVYV

WWW SAWMILLEXCHANGE COM

(&,& <gZZc KVaaZn GdVY '%( Â&#x2122; KZhiVk^V! 6A (*')(

For Classifieds Call Your LBX REP at 1-800-315-9950

The Original Lumbermanâ&#x20AC;&#x2122;s Exchange n 33

“Henry rifles will only be made in America or they won’t be made at all.”

Anthony Imperato

President of Henry Repeating Arms

Henry .22 Lever Frontier Model with Octagonal Barrel.

An affordable, beautiful rifle with superior tack-driving accuracy. Crafted

by American workers for American shooting enthusiasts.

Henry Golden Boy .22 LR /.22 Mag / .17HMR

Henry Big Boy .44 Magnum / 45C / .357 Mag

Henry Acu-Bolt .22 LR / .22 Mag / .17 HMR

It’s not a prideful boast. It’s a solemn oath from all of us at Henry Repeating Arms. Every Henry rifle is and always will be made in America by American workers.

Decent, hard working folks like you who take great pride in their work. We won’t follow the path of other manufacturers who have their products made overseas and slap their name on them. When you read the rollmark on the barrel of a Henry, it’s going to read Made in the USA. We start with only the finest ingredients - gun barrel quality steel from Ohio, genuine American walnut from Missouri and Iowa, steel castings from Wisconsin and brass components from Pennsylvania. We manufacture a rifle that you will be proud to own – with the smoothest action, flawless reliability, and pinpoint accuracy. Made in America with the same integrity as the Henry rifle President Lincoln owned.

We are a family owned business and we stand ® behind every rifle that leaves our plant. You will find our customer service second to none, and we’ll do whatever it takes to guarantee your complete satisfaction.

We invite you to become part of the Henry family. Please order our free catalog, which includes information about our rifles, a list of dealers in your area and a free Henry decal.

Henry U.S. Survival .22 LR

34 n

February 2011

For a FREE color catalog visit www.henryrifles.com or call Toll Free (866) 200-2354 Visit us online at www.LBXonline.com!

good condition - Item ID-12047 - Tom 800-315-9950 x604 2000 Morbark 30/36 - Morbark 3036 New $30,000 upgrade done by factory including HD drum, new belts, bearings Hyd. pump. babbitt knives cat 3306 turbo engine with 335 HP new brakes, new paint and decals no leaks or drips never any trouble with engine. This 2001 is in great shape and ready to work!! - Item ID-11804 - Daren 800-315-9950 x603 2000 Morbark 3036 Whole Tree chipper - Loader, Joystick controls with A/C and heat.

New drum and bearings. serial# is 4661100-3036 - Item ID-11363 - Daren 800-315-9950 x603 2002 Brush Bandit 250 - 12â&#x20AC;? capacity disc-style chipper with auto-feed Cat 115 horsepower engine, in 2006 engine got new assembly and doghouse, 137+/- hours on new engine, 1260+/- hours on frame, upper feed wheel hydraulic lift, work ready! Item ID-11835 - Daren 800-3159950 x603 2003 Morbark 7600 - 3200 hours on a Cummins 12-cylinder engine, 1000 horsepower, ran daily, magnetic end pulley, wireless remote, 5X5, 8X8 screens, Twin Disc clutch, tight clutch, new mill rods, balanced mill, new lights, 85%-95% tires, very good value for a horizontal grinder this size! - Item ID11830 - Daren 800-315-9950 x603 2003 PETERBILT 379 with Box and new Serco 8500 VIN: 2XP5D89X13M591354 ; CAT 475 HP Diesel; Air Trac Suspension; Aluminum Wheels; 24.5 Tires; Truck in excellent condition. Double Frame. Has new box and new Serco 8500 loader. Perfect for storm or FEMA cleanup.

Customer will sell separately.

AR - Item ID-12112 - Tom 800315-9950 x604 2003 ROTOCHOPPER CP118 - Portable wood chip processor with coloring unit.

This machine runs good but has an electric problem it keeps flipping the circuit

1985 CAT 8000# Forklift Item ID: 12124 Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com breaker for the conveyor and auger Sold at this price As Is needing work to electric has extra screens, 2â&#x20AC;? screen. Will produce 35 - 40 yards per hour - Item ID-11973 - Daren 800-3159950 x603 2004 BANDIT 3680 Beast Horizontal Grinder, approx.

4500 hrs., working Daily - Item ID-11819 - Daren 800-315-9950 x603 2004 Bandit Beast - Powered by a V12 800-hp Cat diesel

Trelan DL18 Whole Tree Chipper Item ID: 11292 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com

engine. 2300 hours. Photos coming soon. - Item ID-11233 Daren 800-315-9950 x603 2004 Morbark N-viro Mulch 2000 - 1994 year model.

Powered by a 21-hp Kuboto Diesel. Has a 5 yard infeed hopper, mixing screw and colorant pump. 35â&#x20AC;&#x2122; auger, new motor on color pump and can process around 30 yards per hour. - Item ID-12109 - Daren

.OW /NE 0HONE 0UTS 9OU IN 4OUCH WITH 4(% 3INGLE 3OURCE FOR ALL YOUR 3AWMILL .EEDS 8DGA:N H6LB>AA B68=>C:GN INGDC: 7:GGN 86GG>6<: 9G>K:H A:L>H 8DCIGDAH DEI>B>O6I>DC Carriage Linear & Set Shaft Lewis Controls â&#x20AC;&#x153;Electronics for sawmills by sawmillersâ&#x20AC;? /Ă&#x17E;Ă&#x20AC;Â&#x153;Â&#x2DC;iÂ&#x2021; iĂ&#x20AC;Ă&#x20AC;Ă&#x17E;Ă&#x160; >Ă&#x20AC;Ă&#x20AC;Â&#x2C6;>}iĂ&#x160; Ă&#x20AC;Â&#x2C6;Ă&#x203A;iĂ&#x192;Ă&#x160;EĂ&#x160;*>Ă&#x20AC;Ă&#x152;Ă&#x192;Ă&#x160;UĂ&#x160; i>`Ă&#x20AC;Â&#x2C6;}Ă&#x160;-Â?>LLiĂ&#x20AC;Ă&#x192;Ă&#x160; Â&#x153;}Ă&#x160;/Ă&#x2022;Ă&#x20AC;Â&#x2DC;iĂ&#x20AC;Ă&#x192;Ă&#x160;UĂ&#x160; >Â&#x2DC;`Â&#x201C;Â&#x2C6;Â?Â?Ă&#x192;Ă&#x160;EĂ&#x160; Â&#x2C6;Â&#x2DC;iL>Ă&#x20AC;Ă&#x160;,iĂ&#x192;>Ă&#x153;Ă&#x160;-Ă&#x17E;Ă&#x192;Ă&#x152;iÂ&#x201C;Ă&#x192;Ă&#x160; Â&#x153;>Ă&#x20AC;`Ă&#x160;EĂ&#x160; >Â&#x2DC;}Ă&#x160; `}iĂ&#x20AC;Ă&#x192;Ă&#x160;UĂ&#x160;/Ă&#x20AC;Â&#x2C6;Â&#x201C;Â&#x201C;iĂ&#x20AC;Ă&#x192;

The Most Complete Line of Sawmill Machinery Since 1905!

3INGLE -ACHINE OR #OMPLETE 4URN +EY /PERATION -ORE 0RODUCTION 0ROlT IS /NLY /NE #ALL !WAY &OR 0ARTS 3ERVICE 3ALES

Call (423) 698-0284 #/2,%9

For Classifieds Call Your LBX REP at 1-800-315-9950

MFG

on it! John Deere turbo diesel with 131 horsepower, new under belt, new roller bearing, new hydraulic pump, and new exhaust. swinging hammers on mill, 2 sets of screens included (3â&#x20AC;? and 1 7/8â&#x20AC;?), 10â&#x20AC;&#x2122; discharge conveyor, good tires, 25/16â&#x20AC;? ball hitch on trailer. original ownerâ&#x20AC;&#x2122;s manual included, ready to go to work on your yard waste or pallets! Duratech CO. also owens Hay buster. The Haybuster nane tells you that it is more for farming and the Duratech name tells you that it is for heavy duty work such as gring heavy material, but they bouth fall under the DURATECH name as the company is DURTACH INC. Item ID-11861 - Daren 800-3159950 x603 1994 Haybuster HD-10 Tub Grinder - Powered by a John Deere Diesel Engine, Hydraulic Driven Tub and Conveyors, 10â&#x20AC;&#x2122; tub size, Hour Meter Reads: 920 Hrs, S/N: 18-1-49-0312 Item ID-11693 - Daren 800-3159950 x603 1995 MORBARK 1250 - Fixed Hammers, Knuckle Boom, Cab, and 36â&#x20AC;? Tarantula Heavy Duty Grapple, Tripple Axle, Magnetized Pulley Conveyor, Cat 3412DITTA, 750HP Engine.

1st Hour Meter Replace:6425.

2nd Hour Meter Replaced: 634.

- Item ID-11704 - Daren 800-3159950 x603 1995 WHO P12-56 Tub Grinder - Cat 500 hp, hyd raising tub, updated/new hammer mill, new tub floor, clean unit ready for work. - Item ID-11818 Daren 800-315-9950 x603 1996 Morbark 2400 Chipper - Twin Disc Clutch,New Paint and Decals,Panels in Great shape,Pintle Hitch,New Knives,12X16.5 Tires - Item ID-11879 - Daren 800-315-9950 x603 1999 CBI Model 4800 Grinder 1680 Hours: Twin Disc Clutch; Flex reversible fan, Remote control, Weight 93,000 lbs., Tires 445/65R22.5, New teeth, Updated hammers, Full engine service just completed; Cat 3412 engine w/12 cylinders; Ready to go to work; Very

WWW CORLEYMFG COM s SALES

CORLEYMFG COM

The Original Lumbermanâ&#x20AC;&#x2122;s Exchange n 35

Why? • We use only the highest quality nickel alloy steel • NEW state of the art CNC milling centers for perfect pocket geometry • 100 + years of combined hammering and manufacturing experience • Proudly made in the USA • Stock to 10 days on standard sizes • Nations largest distributor/manufacturer of saws and knives

CALL 800-862-4544 Locations in s Hampden, ME s Meridian, MS s Florence, SC s West Monroe, LA www.usblades.net 36 n

February 2011

800-315-9950 x603 2004 Vermeer HG6000 Demolition Grinder SN:1VRY4531341000129, Cat C16 Diesel 630 HP, Hour Meter Reads: 1,791. Located in Ohio - Item ID-12116 Daren 800-315-9950 x603 2006 Bandit 2680 Horizontal Grinder - Only 765 hours; Cummins 400HP engine; 4’ wide fixed discharge belt, Wireless remote, Water dust supression system, 315/80R22.5 tires. This machine is very clean in excellent condition. - Item ID-12048 - Tom 800-315-9950 x604 “2006 Morbark 18 chipper - 180hp Cat, 160 hours, tandem axle. 10,000lbs, curbside jack, 65”x38” feed chute, 36” drum with controlable airflow, 48 gallon lockable fuel tank, manuals and paperwork included. - Item ID-11355 Daren 800-315-9950 x603 2008 Vermeer BP8000 Bale Processor - BP 8000 bale processor. Machine has big tires and remote for cab. It is not a final cut machine. Excellent condition. MS - Item ID-12099 - Tom 800-315-9950 x604 Dura Tech HD-8 Tub Grinder - Haybuster tub grinder, 8’ opening on tub, 16” x 10’ discharge conveyor, trailer mounted, 215/75R17.5 tires, John Deere diesel engine 110-hp, 705 hours. New clutch, new hitch and new oil temperature guage. Maintenance done, changed out fuel and oil filters; changed the oil. - Item ID-11803 - Daren 800-315-9950 x603 1999 Duratech HD12, 12’ tub grinder - great running tub grinder with brand new mill, new clutch pak, new tub ring, only 100 hours on rebuilt Cat engine 460 horsepower, swing hammers, hydraulic tilt tub, 5 sets of screens included 1”, 2”, 3”, 4”, and composting screen, magnetic head pulley, 2 extra sets of hammers, includes regular tires and foam-filled tires for yard use - Item ID11848 - Daren 800-315-9950 x603 Duratech IG-10 Tub Grinder - Powered by a 300-hp diesel engine. Has 3000 hours. Magnet on the discharge. New hammermill and new belts. 2” screens. - Item ID-11320 Daren 800-315-9950 x603 1992 Haines Bagger, single bagger, stationary, with large hopper, sealer, take-away belt, 8’ X 18” Ruff Top elevated conveyor, originally set up for bagging sand and gravel, owner used only a short while, and then it sat. always stored indoors, single phase electric see a similar model

by Haines..click HERE Haines manufacturer still provides parts for this older unit. - Item ID-11826 - Daren 800-3159950 x603 Haybuster H1000 PTO Tub Grinder - Tub has been re-inforced. Belts are almost new. Mid 80’s model.

Has either 2 or 3” screen. Is 10’ wide at top of flair.

TRANSPORT DIMENSIONS Width 10 ft. 3 in. (3.12 m) Length 21 ft. 4 in. (6.50 m) Height 10 ft. 2 in. (3.10 m) Item ID-11554 - Daren 800-315-9950 x603 Haybuster IG-8 Tub Grinder - Powered by a 110-hp John Deere diesel engine. Has only 1034 hours. Includes a 1” and 1-1/2” screen. 8’ discharge conveyor. - Item ID-11426 Daren 800-315-9950 x603 Morbark 1200 Tub Grinder - Powered by a Cat 3412 650hp diesel motor. Includes a Morlift 350 grapple; lots of new parts; freshly painted; air compressor; heat and A/C in the cab; magnetic head pulley. - Item ID-11660 - Daren 800-315-9950 x603 Morbark 290 Wood Chipper - everything done and ready for spring, great machine for landscaper or a second back up machine for a small tree company; chipper has Visit us online at www.LBXonline.com!

always started and chipped; extra sharpened blades; it has a cummins diesel engine; 88 horse power; has new tires and brakes - Item ID-11897 Daren 800-315-9950 x603 MORBARK 58 3-knife Chipper This machine is ready to work - Item ID-12082 - Daren 800-3159950 x603 Morbark Tree Shear - 20” Morbark SB52 Superbuncher tree shear. - Item ID-11468 Daren 800-315-9950 x603 Vermeer 400L Tub Grinder - This grinder has a cab, grapple and magnetic head pulley. It is powered by a 400hp Cat diesel engine. Unit is on a triple axle trailer and has only 2300 hours. Also a folding discharge conveyor. - Item ID-10539 - Chris 800.315.9950 x600 RESAWS 42” Mcdonough Band Resaw - Verticle special “V” shape infeed allows cutting 4 by 4 on a diagnal. - Item ID-10477 Chris 800.315.9950 x600 Morgan band resaw - has automatic return belt, 220/440, 3-phase, early 90’s model Item ID-11866 - Daren 800-3159950 x603 ROLLING STOCK 1974 Peterbuilt Water Truck - Model 351; Good condition.

Runs and pumps water well.

- Item ID-12060 - Tom 800-3159950 x604 1983 Mack Cruiseliner w/tail mount 1986 Hood 7000 Series loader - Mack E6-350, 800k+

miles, 9 speed Fuller trans, 20k lb.front axle w/ floats, 44k lb. rears. New in last 2 years - windshield, paint, front rims, tires, batteries, reman transmission, conversion to S-cam brake assemblies on front axle, rear brake shoes, air compressor, air dryer, rear suspension w/ trunion, buckets, bushings, truss rods and frame rail, front grille, cab jack pump, recent clutch adjustment, fluids changed and more. Rubber at 75 percent, some minor leaks. Parts truck available.

Hood 7000 loader w/ 22-foot boom, butt grapple and 11k# lift capacity @ 10 feet. New in last 2 years - main boom cylinder, left grapple cylinder, rod ends in right grapple and jib boom cylinders, all other cylinders repacked and/or rebuilt as needed, external filter assembly, valve sections and spools, most swivels and hard/soft lines. Some minor leaks. will take offers! - Item ID-11796 - Daren 800-315-9950 x603 SAW GRINDERS & STRETCHERS Armstrong Band grinder. Nice #4 L.H. Serial RB 6642. Air back feed. 3 Stands. Updates.

Cams: 50E 4U W, 50E 4U F Item ID-11777 - Daren 800-3159950 x603 SAWMILL 1995 Simonds Automatic Bandsaw Leveler - Excellent Condition. Will improve cutting accuracy, filing room

1999 Prentice 620 Harvester Ponsse processing head; New undercarriage; Engine replaced 1000 hours ago. Very strong machine. Good value.

Quebec, Canada

Item ID: 12134 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

safety, saw life, leveling quality and filing room productivity.

The paybacks from automatic leveling - less deviation, kerf reductions, and simplified saw maintenance. Great value and a smart investment! - Item ID12085 - Tom 800-315-9950 x604 1995 Simonds Vertical Circle Saw Leveler - Excellent Condition. Low Hours-3984 Hours. Runs and looks like new. Ball Type KRO-9702.

Serial # 05-9702-1131 Reduce run out with this machine allowing your saws to cut more accurately. Remove all lumps and bumps. Laser readings of the saws flatness are displayed on digital

For Classifieds Call Your LBX REP at 1-800-315-9950

2008 Valmet 860.3 Forwarder 16 ton capacity. Low hours - 2850. Excellent condition and well maintained. HD grapple; Engine guard; 8 wheeled; Blade; Tracks do not come with machine.

Customer job changed.

Must sell for what is owed. Great value! Uses 3.8 gal/hour. MS

Item ID: 12133 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

screen. Able to process saws up to 32” diameter and plate thickness up to .150” thick.

- Item ID-12084 - Tom 800-3159950 x604 2005 Cooks Acu-track AC 36 Heavy Duty, Machine has 1300 hrs on it, 51 HP Perkins Diesel.

Runs the band saw which has a inch and half wide band on it, 12HP Kochler Gas Motor.

Powers the hydrolic controls, it comes with a De-barker/ De-Mudder to save wear and

The Original Lumberman’s Exchange n 37

2/7 %,%#42)#!, %15)0-%.4 ).# 9/52 3/52#% &/2 53%$ 2%#/.$)4)/.%$

s 3QUIRREL #AGE -OTORS s 'EAR -OTORS s 7OUND 2OTOR -OTORS s 3YNCHRONOUS -OTORS s $# -OTORS

FAX TO:

s $# -OTORS #RANE AND -ILL s !DJUSTABLE 3PEED $RIVES s 'ENERATORS !# AND $# s %NGINE 'ENERATOR 3ETS s 4RANSFORMERS 3INGLE 0HASE

*°"°Ă&#x160; Â&#x153;Ă?Ă&#x160;Ă&#x201C;nÂŁĂ&#x201C;Ă&#x160;UĂ&#x160;/Â&#x153;Â?i`Â&#x153;]Ă&#x160;"Â&#x2026;Â&#x2C6;Â&#x153;Ă&#x160;Ă&#x160;{Ă&#x17D;Ă&#x2C6;äĂ&#x2C6;

s 4RANSFORMERS 4HREE 0HASE s !CROSS ,INE -AGNETIC 3TARTERS s 2EDUCED 6OLTAGE 3TARTERS s 3AFETY 3WITCHES s 0HASE #ONVERTORS

800-248-4479

WWW.ROWELECTRIC.COM 419-248-4479 rowelec@glasscity.net 7% !.37%2 4(% 0(/.% (/523 s 7% "59 53%$ %,%#42)#!,

419-244-8887

â&#x20AC;&#x2DC;01 Timberjack 360D Cable Skidder

â&#x20AC;&#x2DC;94 Timberjack 230A Cable Skidder

Good condition. Runs strong. Chains on all 4 tires. Rubber about 25%.

Enclosed cab. Quebec, Canada

Rebuilt Engine; 18.4x26 tires at 90%; Pulls great; Owner retiring.

Item ID: 12135 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

tear on blades and keep them sharp, it has self log loader, and it comes with Extra Blades. Fully maintained, Oil is changed every 150 hrs.

It will cut aprox on average 3,000 board foot a day. - Item ID-11902 - Daren 800-315-9950 x603 2007 Cooks Portable Sawmill with portable edger - 2007 AC-36 Cooks Portable Sawmill with portable edger, 301 hours, tires are in good condition and ready to work. 51-hp diesel, setworks, mudsaw, sharpener. Edger is a Cooks 14â&#x20AC;? - Item ID-12016 Daren 800-315-9950 x603 Armstrong #4 - Bandsaw 38 n

February 2011

Item ID: 12136 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

Sharpener - complete sharpener for left hand blades from 6â&#x20AC;? to 14â&#x20AC;? wide. Comes with a complete full set of saw stands, back feed arm, and filing clamp. Features â&#x20AC;&#x153;Sidewinderâ&#x20AC;? spring loaded feed finger, carbide face plate, plastic cams, and Allen Bradley frequency drive for variable speed on the grinding wheel. Will grind 4â&#x20AC;? or narrower bands with slight modification. - Item ID-11618 Daren 800-315-9950 x603 Complete Select Sawmill - 6â&#x20AC;? double cut bandmill. Can produce 15,000 to 20,000 board feet per day. Mill has 1500 hours. Comes with 48 extra blades worth $10,000. purchased new by current

owner. - Item ID-12127 - Daren 800-315-9950 x603 Log Decks - The bright colored long deck is a 30â&#x20AC;&#x2122; 2 strand with stop and loader and hydraulic drive. Strand spacing is 48â&#x20AC;?.

Deck is based on 5x10 tube frame. Underneath is a 14â&#x20AC;&#x2122; 2 strand deck with 80â&#x20AC;? strand spacing. There is a gear box but no motor. Could be hydraulic or electric. can be solld separt MAKE OFFER! Item ID-11731 - Daren 800-3159950 x603 Lumber transfer 16 ft 4 strand 50 ft 4 strand Green Chain Item ID-11669 - Daren 800-3159950 x603 SHAVING EQUIPMENT 2006 SALSCO 30 Shaving Mill - Hour meter is not working properly, 83 hp cat, Box is 102â&#x20AC;?x 30â&#x20AC;?, has a blower and all knives in blower are in good shape - Item ID-11977 - Daren 800-315-9950 x603 2007 SALSCO 30 Shaving Mill with Blower, 1686 hours, 83 hp Cat Engine, Box is 120â&#x20AC;?x 30â&#x20AC;? Item ID-11978 - Daren 800-3159950 x603 Shaving Mill - Shop built, set up 1 year ago. Box is 48â&#x20AC;?W x 5-1/2â&#x20AC;&#x2122;L. All electric, powered a 3-phase electric motor with converter. Comes with all electrical boxes. 2 heads with 3 knives per head. Powered by a 60-hp motor. Includes deck to feed and discharge conveyor. Processes 2 truck loads per hour. Runs about

$150 per month in electric use. - Item ID-11975 - Daren 800-315-9950 x603 TRIM SAWS

Ambitrim GANG TRIM SAW

Fully adjustable. Fully automatic.

18â&#x20AC;?-diameter circular saw blades.

Saws material up to 3½â&#x20AC;? thick Ă&#x2014; 12â&#x20AC;? wide.

Call (573) 663-7711 Call toll-free: (800) 548-6914

www.logtolumber.com 6%()#,%3 425#+ 42!),%2 6!.

1988 Mack RW713 Day Cab Log Truck - Mack E6-350, 350 HP, 15 Speed Eaton Fuller Transmission, Spring Ride, GVWR: 52,000, Odometer Reads: 612,933, VIN: 1M2AY10Y0JM003060 - Item ID-12000 - Daren 800-315-9950 x603 1989 International Truck with Barko Loader - Model F-2574.

228â&#x20AC;? wheelbase, 312,000 miles, 100,000 on new Cummins 400 diesel engine; tires are 70%; truck has fresh paint.

No leaks, clean and dry 1998 Barko Loader. - Item ID-11655 Daren 800-315-9950 x603 1989 Kenworth T800 Log

Visit us online at www.LBXonline.com!

HEAVY DUTY FORKS AT BIG SAVINGS &"&$'š i]^X` m &%š l^YZ m )-š adc\ # # # # # # # # # # # # # # # # # # # # # # # # '!)%%#%% eV^g 'š i]^X` m +š l^YZ m )-š adc\ # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # -&%#%% eV^g '"&$'š i]^X` m +š l^YZ m )-š adc\ Hjgeajh # # # # # # # # # # # # # # # # # # &!&%%#%% eV^g '"&$'š i]^X` m +š l^YZ m )-š adc\ # # # # # # # # # # # # # # # # # # # # # # # # # # &!&,%#%% eV^g '"&$'š i]^X` m +š l^YZ m +%š adc\ # # # # # # # # # # # # # # # # # # # # # # # # # # &!('*#%% eV^g '"($)š i]^X` m +š l^YZ m ,'š adc\ # # # # # # # # # # # # # # # # # # # # # # # # '!)'*#%% eV^g (š i]^X` m ,š l^YZ m +%š adc\ # # # # # # # # # # # # # # # # # # # # # # # # '!)'%#%% eV^g (š i]^X` m ,š l^YZ m ,'š adc\# # # # # # # # # # # # # # # # # # # # # '!,)%#%% eV^g (š i]^X` m ,š l^YZ m .+š adc\ # # # # # # # # # # # # # # # # # (!)(%#%% eV^g â&#x2013; ). 34/#+ â&#x2013; 3!-% $!9 3()0-%.4 â&#x2013; ,%4 53 15/4% 9/52

30%#)!, $%3)'. &/2+3 6%29 #/-0%4)4)6% 02)#).'

Above forks have capacities from 12,000 lbs. to 30,000 lbs. per pair. ("&$'š i]^X` m -š l^YZ m +%š adc\ # # # # # # # # (!).%#%% eV^g ("&$'š i]^X` m -š l^YZ m ,'š adc\ # # # # # # # # (!-,%#%% eV^g ("&$'š i]^X` m -š l^YZ m .+š adc\ # # # # # # # # )!--%#%% eV^g Also, 4â&#x20AC;?, 5â&#x20AC;?, 6â&#x20AC;? thick forks to 168â&#x20AC;? long.

-ADE FROM ONE PIECE OF STEEL NOT WELDED 1UALITY RECOGNIZED WORLD WIDE

BAY EQUIPMENT CO. / (616) 392-1811 0 / "/8 (/,,!.$ -)#( s &!8

iÂ&#x201C;>Â&#x2C6;Â?\Ă&#x160;L>Ă&#x17E;°i¾°VÂ&#x153;J}Â&#x201C;>Â&#x2C6;Â?°VÂ&#x153;Â&#x201C;Ă&#x160;UĂ&#x160;Ă&#x153;Ă&#x153;Ă&#x153;°L>Ă&#x17E;iÂľĂ&#x2022;Â&#x2C6;ÂŤÂ&#x201C;iÂ&#x2DC;Ă&#x152;VÂ&#x153;°VÂ&#x153;Â&#x201C; Truck w/Log Trailer - Cat 3406B Diesel Engine, Fuller RT0187 18-Speed Transmission, 425 Horsepower, 80,000 GVW, 230 Wheelbase, Odometer Reads: 946,784, VIN: 1XKDDB9X6KS536125, with 1984 White Log Trailer, 26â&#x20AC;&#x2122; Length, VIN: SA100WHITLOG84529 - Item ID-12001 - Daren 800-315-9950 x603 1996 Clement End Dump Trailer, 24FT X 96IN - Tandem Axle, Spring Suspension, Air Brakes, Steel Wheels, GVW 77120, - Item ID-11997 - Daren 800-315-9950 x603 1996 Freightliner w/ Prentice 120C Knuckleboom - Knuckleboom mounted behind the cab, Cat 10 speed Item ID-11593 - Daren 800-3159950 x603 1996 Peterbilt Model 377 1996 peterbilt tamdan, 22 foot silage bed with end dump and hyd. gate,roll over tarp, would make a very good grain truck.

9 speed trans. 80% rubber, 475 cat engine, good truck ready

to go to work. just put new shocks on front. bed sides are 60â&#x20AC;?. - Item ID-11597 - Daren 800-315-9950 x603 1997 Mack CH613 w/1997 StaLite Log Loader Trailer - E7 Mack Engine 454-hp; 354,000 miles; 18-speed transmission; 12,000# front axles; 40,000# rear axles; Suspension Air Ride; 80% air brakes, PS, AC, airslide 5th, cruise control, hyd wet kit for log loader, alum headache rack, dual exhaust, includes 1997 Sta-Lite 45 ft x 96â&#x20AC;? log loader trailer Item ID-11588 - Daren 800-3159950 x603 1998 MACK CL713 - w/ a 1998 Serco Loader, 25â&#x20AC;&#x2122; Boom, 1/4 Butt Grapple, Pintle Hitch, Tractor Package, Power Divider, Heated Mirrors, AC, Cruise Control. Front axle 20,000, Rears 44,000, Camelback suspension, 135,155 miles, 460 hp, 18 Spd transmission. - Item ID-11529 Daren 800-315-9950 x603 1999 Mack CL 700 Log/Loader Truck w/Tri axle Rosa Pup E-7 Mack @ 460 hp. , 8LL trans.,

cruise, Serco 8000 Loader, dual stack, tool box, alumin fuel tank, just had $11,000 in motor, $4,000 in trans and $6,000 in front/rear tandems 1999 Rosa Crib Trailer 3 axle, a/ride, 22â&#x20AC;&#x2122; deck, 22.5 tires, aluminum wheels, hub piloted - Item ID-11530 - Daren 800-3159950 x603 2002 MACK GRANITE CV713, 464hp, 664,500 miles, 18 spd, air ride suspension, 2002 SERCO 7500 LOADER AND 1996 ROSA PUP TIRES AND BRAKES at 80% - Item ID-11700 - Daren 800-315-9950 x603 2003 Mack CH613 - With E7 425 Mack engine, 9 speed, wet kit, air slide fifth wheel, air ride suspension, air conditioning.

210,000 miles. Good tires. Item ID-11087 - Daren 800-3159950 x603 â&#x20AC;&#x2DC;93 Mack with â&#x20AC;&#x2DC;99 Serco 8000 Loader - 93 Mack CL713; Mac E-7 400hp engine; ONLY 160,000 MILES!! 20,000 lb front and 44,000 lb rear; Camel back rear suspension ; New 20-ply steel tires @ 80%; Factory built double steel frame; Complete

For Classifieds Call Your LBX REP at 1-800-315-9950

Complete Select Sawmill Item ID: 12127 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com

â&#x20AC;&#x2DC;97 Mack CL713 w/ 18â&#x20AC;&#x2122; PettyBuilt Pup Trailer Item ID: 12130 Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com

2005 CAT 525B Grapple Skidder Item ID: 12028 Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com HD Mack power train (engine, trany, diff); 3:86 ratio; Jake brake and diff lockout ; 99 Serco 8000# loader with 4 squirt boom; This is a factory built Log Truck. - Item ID12098 - Tom 800-315-9950 x604 WOODWORKING McDonough 54â&#x20AC;?band saw - This is a square column, weight strain machine. The serial # is 54 1076. - Item ID11741 - Daren 800-315-9950 x603

The Original Lumbermanâ&#x20AC;&#x2122;s Exchange n 39

“Perfect In One Pass” .

THE LUMBERMAN’S EXCHANGE Post Office Box 1916 Columbia, Tennessee 38402

PRSRT STD. U.S. Postage PAID Permit No. 212 Pulaski, TN

Electric Electric

Diesel Diesel

Grinding Ag Biomass Grinding Ag Biomass

Grinding Forestry Biomass Grinding Forestry Biomass

Why Is Rotochopper So Special???

Why Is Rotochopper So Special???

Why is it so hard to find a used Rotochopper?

Why is it so hard to find a used Rotochopper?

Why are our customers so loyal?

Why are our customers so loyal?

Intelligent Design Intelligent Design

Technologically advanced grinders that make precisely the right Technologically advanced grinders that make precisely the right particle size for biomass fuel, landscape mulch, animal bedding, particle size for biomass fuel, landscape mulch, animal bedding, wood flour, wood pellets, gasification, cellulosic ethanol, etc. wood flour, wood pellets, gasification, cellulosic ethanol, etc.

Thrifty, energy efficient grinders built for the 21st century and Thrifty, energy efficient grinders built for the 21st century and backed up with . . . backed up with . . .

World class factory service and support.

World class factory service and support.

217 West Street 217 West Street St. Martin, MN 56376 St. Martin, MN 56376 608­452­3651 608­452­3651 320­548­3586 320­548­3586 http://www.rotochopper.com http://www.rotochopper.com info@rotochopper.com info@rotochopper.com

Give us a call and let a Rotochopper save YOUR world by grinding YOUR products . . . .

Give us a call and let a Rotochopper save YOUR world by grinding YOUR products . . . .

“PerfectInInOne OnePass” Pass”. .

“Perfect