LBXonline presents The Lumberman's Exchange Magazine

December 2010

Since 1986 - The Original (800) 315-9950 or (615) 349-1890

-PHHFST 4BXNJMMT 1BMMFU .BOVGBDUVSFST 8PPE 3FDZDMJOH &RVJQNFOU

3 NEW MILLS FOR A

NEW YEAR

Dreams Come True At this special time of year Wood-Mizer recognizes all those who make their dreams come true.

LT15GO THE INDUSTRY’S MOST POPULAR SMALL SAWMILL IS NOW GOOD TO GO

Wishing you a Merry Christmas and a Happy New Year.

LT35HD FULLY HYDRAULIC WOOD-MIZER SAWMILLS FOR UNDER $20,000

LT70DCS JOYSTICK CONTROLS ON WOOD-MIZER’S MOST PRODUCTIVE MILL

!""#$$%#"&!' ¢ ] ] ^} b, ~•Èå] }

This 14,000 square foot home was built using a Wood-Mizer LT40 Super Hydraulic

by Bob Shortridge Jr. of Dreaming Creek Timber Frame Homes.

PALLET STOCK, STUDS, I-JOISTS, STRUCTURAL COMPONENTS THE L-M SAWS, WILL TAKE YOU TO THE NEXT LEVEL! Leading the industry in bundle cross cut systems since 1957!

New Design!

New Technology!

Portable Yard Saw Model 200MP-7-SS Gas Model 100MP-7-SS Electric 3 inch side shift, a standard feature

Traveling Arch Saw Hydraulically controlled No manual cutting Our most popular turn key system

The New L-M “I-CUT” Bundle cross cut system! * 60’ long frame to precision cut your I-Joists * Precision accuracy of +- 1/32” * Shorter system are available to process all your cutting needs * Tremendous labor savings, Guaranteed!

L-M Deck Cut Off Saw 3 foot to 12 foot bar lengths Hydraulically controlled

Automatic Strapping System Attach bottom crossers Side squeeze incorporated Polyester strap

Flush End Bump Rollcase Reduce or eliminate your end trims

The Verticut P4 System now offers scan and cut technology, reducing operator error by using a bar code system!

Visit our web site www.LMSaws.com to see our complete product line and videos!

L-M Equipment Co. Ltd Phone: 604-431-8800 Toll Free: 1-800-455-8807 Web Site: www.LMSaws.com E-Mail: Sales@LMSaws.com

Jem Machine, Inc. "Your full source of Good Sawmill Equipment" www.JemMachine.com

P.O. Box 108 125 Airport Road Grangeville, Idaho 83530

BIG BLOW OUT ON FILING ROOM EQUIPMENT

Falcon/Kimwood Hog Chippers & Hogs (20hp to 500hp)

We have (14) 24 - 30 ready for shipment and some still standing.

Grundler Hog

#2217 Armstrong

Bargain Basement Prices 6gbhigdc\ '*! HZg^Va &).%+ ## ############################### $39,000 Ready to Install at your facility!

75’ w x 270’ l x 24’ h

(2) 24-Unit Chip Bins Truck Bins (24 to 62 Unit)

Grayco Metal Building In Stock 35” & 44”

NICHOLSON 22” A5 Hog & Chippers

Call or Email: Mike Freeman (503) 407-9652 wmikefreeman@gmail.com

Inventory Changes Daily Call Mike for your equipment needs.

20 USNR DOUBLE LENGTH INFEED

Office: (800) 282-5597 Fax: (208) 983-0633

Your Dollar Goes Further on Equipment with Us! 4 n

December 2010

Visit us online at www.LBXonline.com!

Original

5IF

-6.#&3."/µ4 &9$)"/(& Your #1 Source for Forest Industry Products!

The Lumberman’s Exchange is published monthly and is circulated internationally to sawmills, loggers, pallet makers, recyclers and industrial woodworking plants.

PUBLISHER Woods Publishing ADVERTISING SALES Morris Woods (615) 349-1890 morris@LBXonline.com DESIGN DIRECTOR Heninger & Associates lbxonline@comcast.net SALES MANAGER Michelle Cappel (800) 315-9950 x606 EQUIPMENT REPS Equipment Representative Daren Bodine (800) 315-9950 x603 Equipment Representative Tom Hirt (800) 315-9950 x604 MAILING ADDRESS P.O. Box 1916 Columbia, TN 38402-1916 (615) 349-1890 Phone (931) 233-0802 Fax AD SUBMISSIONS May be sent to— sales@LBXonline.com POSTMASTER Send address changes to: Lumberman’s Exchange P.O. Box 1916 Columbia, TN 38402 The Original Lumberman’s Exchange is published monthly

by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers the Lumberman’s Exchange, its principles and associates are not held liable for errors or omissions. Reproduction in whole or part prohibited with-out written consent. ©2010 by Woods Publishing.

** Auctions **

– NEW –

HENDERSON AUCTIONS — Page 10 WWW.HENDERSONAUCTIONS.COM LIQUIDATION AUCTION / ÕÀÃ`>ÞÊUÊ iVi LiÀÊ£ÈÊUÊ£ä\ääÊ>° ° Natalbany, Louisiana CHARLESTON AUCTION — Page 11 WWW.CHARLESTONAUCTIONS.COM STOCK BUILDING SUPPLY TIMED ONLINE AUCTION ONLY i} ÃÊ À `>Þ]Ê iVi LiÀÊÎ]Ê£ä\ääÊ>° ° Online Bidding at www.bidspotter.com Springdale, Arkansas & Wilson North Carolina

Best Value Log Splitter Efficient design; 32” Log Capacity; 13 HP Honda motor; Great Price at $5,750. FOB: PA Item ID: 12062 Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com

** INFO LINK ** AJD Forest Products ...............33

Litco ........................................15

Amark .....................................12

LM Equipment, Canada ............3

ArmorHog® Grinder ..................6

M&F Gauge ............................25

AWMV ......................................9

Machinery Sales Co., Inc. .........8

B & B Mfg. .............................31

Menominee Saw......................34

B. H. Payne .............................15

Multitek ...................................32

Baker .......................................17

Phase-A-Matic ........................19

Bartlett Saw Service................37

Piper’s Saw Shop ....................24

Bay Equipment........................39

Resource Recovery .................29

Ben Jones Equipment........21, 27

Robert’s Equipment ............9, 30

Brewer Eagle ...........................28

Rotochopper ............................40

Buck Equipment (AIM) .........16

Row Electric............................19

Charleston Auction Group ... 11

Sawmill Exchange ..................33

Cord Master ............................22

Select Sawmill ........................26

Corley Mfg ..............................35

Suffolk Machinery ....................2

CRD Metalworks ....................23

Surplus Center.........................38

Dyna Products .........................18

Tremzac ...................................20

Henderson Auctions ..............10

Truck & Trailer World...............7

Henry Repeating Rifle.............13

US Blades................................36

Jem Machine .............................4

Woodmizer ..........................1, 23

For Classifieds Call Your LBX REP at 1-800-315-9950

FOR CLASSIFIEDS Call 800.315.9950 See pictures, prices, and Location of all equipment at www.LBXonline.com

BLOWERS 45” Bayley material blower 25HP - This 45” Bayley Mfg. blower has a 20-1/4” side inlet and a 12” top outlet. The fan diameter is 36” and the housing width is 15-1/2”. It has a 25 HP 220/440 drip proof motor with a 6-B drive. - Item ID-11783 Daren 800-315-9950 x603 Chicago Blower - Siemens 75-hp motor, Series 30GI blower. 1775 RPM. - Item ID-10820 - Michelle 800-315-9950 x606 Koger Blower - 75-hp, 54”x16” fan, 18” inlet and 18” outlet - Item ID10849 - Michelle 800-315-9950 x606 Phelps blower with 20 HP motor - Phelps blower with 20 HP motor - Item ID-11742 - Michelle 800-3159950 x606 CARRIAGES & DRIVES Salem 4-headblock Carriage - Left handed - Item ID-10846 - Michelle 800-315-9950 x606 CHIP SCREENS Morbark Chip Screener - 6x6 chip screener with 5-hp fine sawdust blower and 10-hp chip blower with pipes. All Hydraulic.

Good condition. - Item ID-10766 Michelle 800-315-9950 x606 CHIPPERS CM&E 36” chipper. Bottom discharge. - CM&E 36” chipper.

Bottom discharge. 75 HP - Item ID11751 - Michelle 800-315-9950 x606 1994 WOODCHUCK - ASPLUNDH WOOD CHIPPER. HOURS: 2226, TIRES: 8.75-16.5LT, ID# 1W9B71210RS200896, WEIGHT IS 4000#, WD 17586, WOOD CHIPPER

The Original Lumberman’s Exchange n 5

6 n

HiViZ

ARMORHOGÂŽ GRINDER REPLACEMENT PARTS

ArmorHog

8^in

ÂŽ

December 2010

E]dcZ

âœ

E#D# 7dm &.&+ 8dajbW^V! IC (-)%'

*Company name and address required to process your change.

6YYgZhh

>cY^k^YjVa CVbZ

The Original Lumberman’s Exchange

Company Name*

EQUIPMENT REPRESENTATIVES

If you need to Change your Address or Add Your Name to our mailing list, then please complete this form and mail to:

â?‘ Please Add

â?‘ Please Change â?‘ Please Remove

O^e

CW MILL EQUIPMENT CO., INC., HAS A NEW BRAND!

Call us today for all your used equipment needs! —Michelle Michelle Cappel Phone: 800-315-9950 Ext. 606 Daren Bodine Phone: 800-315-9950 Ext. 603

provides top quality, high performance screens, tips, hammers and other replacement parts for All Brands and Models of industrial grinders. ArmorHogÂŽ provides custom made hammer mill screens and grates for all brands, all configurations, and all models of grinders and is your best choice for grinder tips, bits, strikers, and replacement hammer heads.

ArmorHogŽ uses the highest quality parent metal in all of its forgings and has its own unique blend of carbide called NitroGrit™, a proprietary blend of carbide found to best suit grinding applications. ArmorHogŽ tips with NitroGrit™ carbide matrix provide the best performance and the longest life for your money.

NitroGrit™ can be applied in any custom pattern that our customer's request, and is available in a variety of grit levels.

ArmorHogÂŽ is a brand totally focused on providing replacement parts with the longest life, and best performance to benefit all makes and models of grinders.

For more information regarding HogZilla Grinders visit www.hogzilla.com.

For more information regarding High Performance Grinder Parts visit www.armorhog.com.

Tom Hirt Phone: 800-315-9950 Ext. 604

For more information regarding Hydraulic Mounting Kits visit www.cwkits.com.

DEALS FROM LAST MONTH

NOVEMBER

2005 CORDKING FIREWOOD PROC.

Item ID: 12027 Contact: Daren Ph: 800-315-9950 x603

CAT D4H TSK w/ Winch & Forestry Pkg.

Item ID: 12024 Contact: Daren Ph: 800-315-9950 x603

2007 COOKS PORTABLE SAWMILL

w/portable edger Item ID: 12016 Contact: Michelle Ph: 800-315-9950 x606

See Photos online at XXX -#9POMJOF DPN

Visit us online at www.LBXonline.com!

lackstone

I

eaver

Firewood Processors

The Blackstone Beaver Components The Blackstone Beaver Firewood Processor is built in the USA with industry standard components.

Hydraulic systems built with high quality Parker hoses and hose ends.

• • •

Operator comfort in enclosed cab Dual joystick controls ease hand fatigue Comfortable, adjustable seat Joystick controls Engine controls inside cab

lackstone

eaver

I

Size Maximum log length is 25’ with a 24’ diameter. Cut length is adjustable up to 24” long. Splitting head can be adjusted by up to 10” for consistent splits on various log diameters.

• •

P: (508) 478-5902 F: (508) 321-9876

123 Uxbridge Road Mendon, MA 01756

Customization Blackstone Beavers are customizable by the manufacturer. Integrate your ideas into a production machine built to match your requirements! Don’t need a mobile unit, specify a skid mount.

Speed The processor comes standard with a 3-stage hydraulic pump. All strokes are performed in high speed by default, but if greater splitting force is needed, pressure will immediately be increased.

When load is decreased, the high speed stroke will renew.

www.blackstonebeaver.com For Classifieds Call Your LBX REP at 1-800-315-9950

The Original Lumberman’s Exchange n 7

WE ARE OVERSTOCKED! PRICES REDUCED! TAKE ADVANTAGE OF THIS CHANCE TO SAVE BIG! 9802 North Vancouver Way Portland, Oregon 97217

7 i Ê > }Ê Ã Êv ÀÊ i«ÌÊ 8ÊUÊ >V Ã> iÃJ Ã °V

0H s &AX WORLD’S LARGEST INVENTORY New & Used Sawmill & Planing Mill Equipment -EBOR #APACITY "ANDMILL

2AWLINGS X 2OTARY (OG

3TETSON 2OSS 4IMBER 3IZER

BANDMILLS & HEADRIGS Salem 6’ Air Strain Bandmill Kockums 6’ Quad Maxi Mill with 6’ Quad Salem 7’ RH Bandmill Salem 5’ Air Strain Bandmill L&B 6’ Air Strain Twins McDonough 62” Twin Air Strain CARRIAGES & DRIVES Salem Linear 36" 2-Block Tyrone 240 Hydraulic Drive Corley 40” Hydraulic 3-Block Salem 24” 3-Block Linear Carriage USNR 2000, 42" Stud Carriage Salem 60” 4-Block Carriage Salem 42” 4-Block Carriage CHIPPERS & SCREENS BM&M 5’X14’ Screen Rotex 6’X16’ Screen Precision 58” Horizontal Feed West Salem 58" Horizontal Feed Precision 8X8 Screen Kockums 8X8 Screen Precision 7X7 Screen Precision 66" Horizontal F. Precision 118” HFBD Chipper Precision 96” Whole Log Precision 48” Horizontal F. B.C. 6140 Slant Disc CM&E 36” Rechipper DEBARKERS Nicholson 35" A-2 Debarker Nicholson 22” A-5 Debarker Nicholson 44” A-2 Debarker EDGERS & GANGS Pendu Double Arbor Gang

OVER 13 ACRES

OF

Schurman Late 4” x 36” Shifting TMT Chipping Edger Schurman 6TA48 Combination Ukiah 6” x 48” Gang Edger Schurman 12” Double Arbor Gang FILING ROOM EQUIPMENT Vollmer Cana E (8) Wright Mod. 1801 (3) Weinig R 934 Profile Grinder Erma 71” Mag Bed Grinder Newman G-200 Grinders Hanchett Knife Grinders (10) Wright W-1600 Auto Tipper Wright W-150 MSM Top & Face Armstrong No. 90 Equalizer Armstrong Dual Side Grinder Armstrong Side Pro Newman G-20 Rotary Armstrong No. 4 RH B.S. Grinder Armstrong No. 25 Circle Hanchett DN-40 Knife Grinder Armstrong No. 4 LH B.S. Grinder Armstrong No. 4 B.S. Stretcher Roll HOGS & PULVERIZERS

Rawlings 48 x 60 Rotary Hog Rawlings 36 x 60 Rotary Hog Jeffrey 36 x 60 Shredder Jacobson Horizontal Hog Zeno Low-Noise Grinder West Salem Big Brute Grinder Jacobson Hammer Mill W. Salem 52” Horizontal Grinder Jeffrey 56 WB Hammer Hog Lamb HX 750 Hammer Hog Kimwood Rotary Hog Jeffrey 76WBH Horiz. Hog Gruendler 50XE Hammer Hog MISCELLANEOUS Mereen Johnson 424DC Ripsaw Industrial 3496 Finger Jointer Industrial FJS-25 Finger J. System Hurricane 28” Chop Saw Fruilmac End Matcher (4) Peerless 24-Unit Bins

Peerless Trailer Dumper Samuels Plastic Strapper (1) 60-Unit Peerless Bin L&M Log Cut-Off Saws Timesaver Sanders (6) Lumber Stackers (3) Irvington 20’ Trimmer, 1’ Saws Mereen-Johnson 48” Ripsaw Sullair V-200TS Compressor 5-Arm Hyd. Tilt Hoist Sticker Recovery System Irvington Planer Trimmers PLANERS & MOULDERS Stetson-Ross Timber Sizer Weinig Powermat 2000 Mattison 226 12” Moulder Mattison 228 16” Moulder Diehl 6-head TF Moulder Buss 55 Double Surfacer Buss 88 Double Surfacer Wadkin 6-Head Moulder Yates A-20 10-Knife Weinig U22A, 6-head Wadkin 7-Head Moulder Newman M-990H 20-Knife Newman 382 Double Surfacer S-R 6-14-D1 15”, 16-Knife Iida High-Speed Moulder Newman M712 12-Knife S-R 6-10-A1 10-Knife Yates A-20-12, 15", 10-Knife Coastal 24” 20-knife Planer S-R 6-14-D1 24” 16-Knife S-R Chip Blankers Weiniig P22N 5-Head RESAWS McDonough 54” Twin Horizontal 36” Tri-State Tilting Resaw Turner 48” Rollfeed Resaw Turner 52” Rollfeed Resaw Salem 6’ Horiz. Air Strain Kockums 6’ Horiz. Twin Air Strain McDonough 62” Linebar Resaw

WE ARE PARTING OUT

Woods Planers 412M, 414M, 407M, 409M. 415M Woods Moulder 132M Yates Planers A-20, A-62, A-66 Stetson-Ross Planers 6-12-A1, 6-12-C1, 6-10-A1, 6-14-D1 Mattison Moulders 276, 226, 228 SAVE BIG ON MOTORS AND MAJOR PARTS!

GREAT BUYS ON USED EQUIPMENT!

For complete equipment list, visit our website:

ÜÜÜ° >V iÀÞÃ> iðV

OR CALL AND ASK FOR DEPT. LX

( 8 6 6) 241-2977

SELF FEEDER WITH FORWARD AND REVERSE CONTROL, 6 CYLINDER FOR GAS MOTOR, 16 INCH DRUM - Item ID-11807 Daren 800-315-9950 x603 2000 BANDIT 150XP - CUMMINS 3.9L DIESEL 12 IN. CAPACITY Item ID-11790 - Michelle 800-3159950 x606 2008 Dynamic 585 Chipper Factory Rebuilt with upgraded components including new discharge chute, new larger bearings, new larger feed pins, new access panels to chip chamber wear plates. JD 500 HP engine with 2200 hours. Limited factory warranty on upgraded features. - Item ID-12059 - Tom 800315-9950 x604 2008 Model 570 Dynamic Chipper - 1830 Hours; New Drum at 750 hours; Cummings 325 HP Engine; New wear plates in belly pan and discharge chute. Runs good. - Item ID-12061 - Tom 800-315-9950 x604 48” Precision Chip Pak Reconditioned, new 100-hp motor, chip blower, cyclone, 5x5 screen with new screens 1-3/4” & 3/4”, 6 knife with 3 blocked off, 20-hp on blower, new bearings, new belts, new sheaves. Price includes loading on truck. - Item ID-11586 Michelle 800-315-9950 x606 66” Fulghum 8 Knife Chipper with a 250 hp motor, $7500. - Item ID-10478 - Tom 800-315-9950 x604 Can Car Chip & Saw grinder - Can Car Chip & Saw grinder with air hold downs - Item ID-11738 Michelle 800-315-9950 x606 Fulghum 54” 8 knife chipper.

- Fulghum 54” 8 knife chipper.

Horizontal feed. Vertical discharge. No motor. No pulley on machine but a bushing is present.

- Item ID-11737 - Michelle 800-3159950 x606 HMC 48” Chipper - HMC 48”side entry, top discharge chipper. It

hs a model CM 48. Serial 23-111.

It has a 75 HP 208-230/460 totally enclosed motor and is a very clean looking machine - Item ID11750 - Michelle 800-315-9950 x606 Hydraulic Feed Chipper - BANDIT 4B Cummins Power, Works Well - Item ID-11806 - Michelle 800-3159950 x606 Precision 48 Chipper & Shaker - Fines blower and dual trailer shoot. 125-hp electric motor and 36’ vibrating conveyor. - Item ID11667 - Michelle 800-315-9950 x606 Trelan DL18 Whole Tree Chipper - Powered by a 475-hp Cat 3406 diesel engine. Has a knuckleboom loader. Will chip up to an 18” diameter log. Is pulled with a semi tractor. Cab has sound protection and heat. Rebuilt from the ground up, new wheel bearings, new face plate for chipper wheel, changed Detroit engine to Cat engine went from 300-hp to 425-hp, added new belts and heavier bearings. Only run about 6 months after rebuild.

Can be used to make fuel-wood.

Is ready to go, needs no work.

Was manufactured in the mid 80’s. extra knives that come with it - Item ID-11292 - Michelle 800-3159950 x606 CHOP SAWS Block saw - This well-guarded block saw has a 4x6 capacity.

Blocks drop into a small elevator.

It has a motor on the elevator and one on the saw. Motor controls are present. Air is hooked up to actuate the saw stroke. Feed is manual. Block length is adjustable - Item ID-11838 - Daren 800-3159950 x603 COMPLETE SAWMILLS --HMC MM10 Right hand 4 block modular mill-- - 2-saw vertical edger and 150 HP motor and starter. Carriage is all air powered.

Needs a log turner, the carriage is 17’ 8” total length the 1 head is

If you want to take your operation to the next level, look to Wood-Mizer’s full line of resaws. With industrial, mid-level, and entry-level machines, these resaws help you reduce cost, increase yield, and grow profits. s Rugged, high production, low maintenance s Extremely accurate, single and multi-head band resaws yield more lumber, value, and profit s Breakdown cants with pinpoint accuracy s Thin-kerf provides higher yields and productivity

Now is the time to revitalize your operation and get results with a Wood-Mizer ReSaw.

For Classifieds Call Your LBX REP at 1-800-315-9950

INDUSTRIAL:

MID-LEVEL:

ENTRY-LEVEL:

800.553.0182

WoodmizerIndustrial.com

The Original Lumberman’s Exchange n 9

AUCTION

A8E#8&'>8=@*

!"#$%&'()*+,-,./,$*01*2*03AM

45066*789":'(*;0*<=$>"*2*<'>'?/'@()*A=#8%8'@')*BCD*

G=.H?,>,*I?(:==&*J'@#K'->#$8@9*I?'@>* LM=$.,$?(*7#@>*M=$,%>*I$=&#->%)*N@-FO*

J'@#K'->#$8@9*PE#8H.,@>*2*J'8@>,@'@-,*C"=H*2*Q=??8@9*C>=-R* A8K>*!$#-R%*2*I'$>%*2*D--,%%=$8,%*2*P@S8$=@.,@>'?*PE#8H.,@> T3U*D-$,%*=K*Q,'?*P%>'>,*2*VW3)333%K*X#8?&8@9 Featured Items: Featured Items:

I$=-,%%*PE#8H.,@> Process Equipment UÊ Coe 249 Lathe =^\] heZZY he^cYaZh! XdgZ Yg^kZ! ,.% G=,*V4T*A'>",* High speed spindles, core drive, 790 charger X]Vg\Zg l$ hiZe [ZZYZg! XdbejiZg Xdcigda gddb# GZXZcian !"#$%&'#(&&)&*+#,-.'/%&*#,-0%*-1#*--.2#3&,&0%14#3&,-0)56-0&) GZXdcY^i^dcZY# Y8??8'.%*Y"8>,*7=>*I$,%%* w/Sparter Conversion Rebuilt UÊ Williams White Hot Press l$HeVgiZg 8dckZgh^dc GZWj^ai id %-#7850#-'&0509+#:&!#$%-'$#;0)#9/5)&$+#<#.;0#1-;)&*#!5%=#>?&)# )'¹ deZc^c\! CZl hideh VcY \j^YZh! & bVc adVYZg l^i] ÃmZY head, Spartec charger, Spartec pie rack, Spartec unloader/stacker ]ZVY! HeVgiZX X]Vg\Zg! HeVgiZX e^Z gVX`! HeVgiZX jcadVYZg$hiVX`Zg Z?=/,*I$,[H$,%%* UÊ Globe Pre-press P$S8@9*J==$,*Z'%*\*C>,'.*],@,,$*+$(,$* UÊ Erving Moore Gas & Steam Veneer Dryer ( BVmlZaa <Vh 7jgcZgh! CZl HiV^caZhh HiZZa 9ddgh @AB#C;?!&11#D;$#E/*0&*$+#:&!#F%;501&$$#F%&&1#G--*$#H#F=&&609+# H]ZZi^c\! JcjhZY =ZVi :mX]Vc\Zgh# I0/$&)#J&;%#K?,=;09&*$2

P@S8$=@.,@>'?*PE#8H.,@> Environmental Equipment UÊ MegTec CleanSwitch CS200 GZ\ZcZgVi^kZ I]ZgbVa J,9!,-*G?,'@C:8>-"*GCV33*3&9&0&*;6L&#M=&*.;1# Dm^Y^oZg '*!%%% hX[b GZ\ZcZgVi^kZ I]ZgbVa Dm^Y^oZg jc^i# N?5)5O&*#8PQQQ#$,(.#3&9&0&*;6L&#M=&*.;1#N?5)5O&*#/05%2#R0$%;11&)# >chiVaaZY cZl ^c '%%-# new in 2008.

A=9*C>'-R,$ Log Stacker !'(?=$*!AC[T33*Log Stacker 90000# Capacity, Re‐Con UÊ Taylor TLS-900 Ad\ HiVX`Zg .%!%%% 8VeVX^in! GZ"8dc S/..50$#S:<7#PQQJT#K0950&+#K0,1-$&)#,;U+#'-!&*$=5V#!"# 8jbb^ch 8C&) *%%=E :c\^cZ! :cXadhZY XVW! edlZgh]^[i l$ =4)*-$%;6,#$%&&*509+#AA28PWAP#(*-0%#H#<X2QQ38P#*&;*#6*&$+#<QXYY# ]nYgdhiVi^X hiZZg^c\! ((#'*"(* [gdci &-#%%G'* gZVg i^gZh! &%-¹ [dg`h l$ XaVbeh# forks w/ clamps

7,@&,$%=@Auctions Buyer’s Premium 10% Lic#136

VV;F151FVV;V

:::F",@&,$%=@'#->8=@%F-=.

<=>?,7@A(B<>)7?@C !"#$%&'()&*#(+(,-"./*01 Large Quantities of Building Materials

?@!7@9(?@!D(B<>)7?@ STOCK BUILDING SUPPLY !"#$%&'()%*+,(-.*%#"&. /%&0.1'(2343563*(7+,(.+(89:99.5( Springdale, AR & Wilson, NC +%(;,<*$0.1'(2343563*(=+,(.+(8>:99?5 TIMED ONLINE ONLY AUCTION: Dca^cZ 7^YY^c\ Vi lll#W^YhediiZg#Xdb

?@!7@9(?@!D(B<>)7?@

2--&3(+(45&/65&% Large Quantities of Raw Granite and Stone

Friday, December 3 @.$(A3B.$'()3C.0.

I^bZY Dca^cZ 6jXi^dc 7Z\^ch Vi &%/%% V#b#

23+."#$(-%5"&B(D%%&E

Wednesday, December 8 Adih 7Z\^c 8adh^c\ Vi &'/%% e#b# 8HI

4<A9(EF2BD(?@C7)9(B<>)7?@ TWO LOCATIONS: F%<$+%&'(;3G.$ Â&#x2122; &&%+ Cdgi] DaY B^hhdjg^ GdVY! Heg^c\YVaZ! 6g`VchVh 23+."#$(-%5"&B(D%%&E Â&#x2122; )-)& AVbb GdVY! L^ahdc! Cdgi] 8Vgda^cV

70/"38&*5.(9:"*;#%08 Park Industries Fastback FlatEdge Polishing Machine.

>5..(GHIIJ(KLIFHMEN(-&(O*3*8(<3(?0.*0%(58 PREVIEW INSPECTION: HUGE ONSITE AUCTION Â&#x2122; I]jghYVn! 9ZXZbWZg ' - IN HOUSTON, TEXAS Â&#x2122; ./%% V#b# " */%% e#b# AdXVa I^bZ COMING JANUARY 2011

666P>Q5&.%38-0B"R8*-03PR-# FEATURED EQUIPMENT:

Park Industries Velocity Edge Shaper and Polisher

EVg` >cYjhig^Zh ;VhiWVX` ;aVi":Y\Z Eda^h]^c\ BVX]^cZ! @dbd BVX] DcZ 8C8 GdjiZg >ccdkV KG*&%! EVg` >cYjhig^Zh KZadX^in :Y\Z H]VeZg VcY Eda^h]Zg! EVg` >cYjhig^Zh 9jVa He^cYaZ 8C8 HidcZXZciZg! LZ^c^\ J(%:A &'! H8B> HVcYnV , L^YZ 7Zai HVcYZg! =j\Z >ckZcidgn d[ 7j^aY^c\ BViZg^Vah! AjbWZg! GVl <gVc^iZ HidcZ! BJ8= BDG:

Call (877) 357-8124 or View Catalog Online at www.CharlestonAuction.com 2â&#x20AC;&#x2122;6â&#x20AC;? from the end of the carriage to the center of the hea 2005 Timberharvester Sawmill Purchased new in December 2005, has 1550 hours, powered by a 47hp Lombardini diesel, log debarker, computer setworks, can cut up to a 36â&#x20AC;?x21â&#x20AC;&#x2122; log. Stored and run inside.

- Item ID-11584 - Michelle 800-3159950 x606 2008 Mighty Mite Mark IVB Portable Sawmill - Bandsaw Sawmill. Perkins 37hp Diesel Motor. Hour Meter Reads: 49.5.

S/N: B4B0637 with 2007 Mighty Mite Mark IVB 40â&#x20AC;&#x2122; Trailer, VIN: 1M9SB40237P538637 - Item ID11996 - Michelle 800-315-9950 x606 56â&#x20AC;? Circular Sawmill - Runs 8â&#x20AC;&#x2122; to 28â&#x20AC;&#x2122; long saws up to 36â&#x20AC;? wide. Is PTO powered, currently running off 80-hp tractor. - Item ID-10802 Michelle 800-315-9950 x606 Complete Circle Mill/top saw/ resaw/edger/all transfers -

Complete sawmill helle carriage with top-saw; infeed deck; edger; McDonough resaw; Cat Gen-set; all transfer equipment. Circle saws and related equipment.

All electrical switches included in sale. Buyer is responsible for removal. - Item ID-11656 - Daren 800-315-9950 x603 Complete Plywood Mill - sold - Item ID-10797 - Michelle 800-3159950 x606 Complete Select Sawmill - 6â&#x20AC;? double cut bandmill. Can produce 15,000 to 20,000 board feet per day. Mill has 1500 hours.

Comes with 48 extra blades worth $10,000.00. Also includes a debarker with 840 hours.

Both purchased new by current owner. Price new without the extra blades is $160,000. - Item ID-10782 - Michelle 800-315-9950 x606 Comptete Operating Sawmill -

1-HMC 30 ft. 4-Strand Log Deck with stop and loader. 2-HMC V2110 Slant Track Debarker - 24 ft. capacity Cornell Bark Conveyor â&#x20AC;&#x201C; 40 ft.Debarker control cab 3-40 ft Hour Glass Rollcase. 4-30 ft.

Heavy Duty Log Deck with stop and loader.HMC log turner (chain) up and down. 5-Lane Tech Heavy Duty 536 4-Head Block Carriage.

5 axles with 12â&#x20AC;? wheels.3 Cant turners. 6-Heavy Duty Modular Track System capable of sawing 24 ft. 7-Head Rig-48â&#x20AC;? main saw with 150 Hp-36â&#x20AC;? top saw with 75 HP-Off bearer belt-Over-sized booth with o heat and air-Silver Tech set works.8. 75 HP Hydro Static feed for carriage with cooler. 9. Mellot 24 ft retractable Roll Case with 8â&#x20AC;? spiral rolls and 2 pop up transfer rolls. 10. Mellot 24 ft Roll Case with 8â&#x20AC;? smooth rolls. 11. Mellot 8 ft. 4-Strand Transfer Deck to Edger with stop.

For Classifieds Call Your LBX REP at 1-800-315-9950

12. Lane Tech combination Edger Resaw with 75 HP motor.2 â&#x20AC;&#x201C; 18â&#x20AC;? blades, center split with Silver Tech setworks. Infeed table- Cant transfer chains to resaw. 2 Carter laser site lines. 13. Lane Tech Resaw 42â&#x20AC;? circle saw. Line Bar with Manual set work from 0.5â&#x20AC;? to 8â&#x20AC;?. 2 side arm rolls plus top back rolls â&#x20AC;&#x201C; all powered. 14. Mellot 20 ft. Self-tailing Out Feed Belt. 15.

Mellot 20 ft. Split Out Feed with 8â&#x20AC;? rolls and pop up stop. Merry go around. 16. Mellot 4-Strand with square lugs. 17. Mellot 22 ft.

Belt Conveyor. 18. Mellot 4-Strand 14ft (roof top chain) Deck with Hyd. stops. 19. Cornell 2-24â&#x20AC;? saws â&#x20AC;&#x201C; auto Set works from 4ft. to 20 ft. in 1 ft. increments. 20. Mellot 40 ft. 4-Strand Lumber Deck. 21.

2-Strand Lumber Deck 24 ft. 22.

100 gal Hyd Pump Tank with solenoids for deck functions. 23.

Dayton 10HP Air Compressor, 3

The Original Lumbermanâ&#x20AC;&#x2122;s Exchange n 11

1997 Husky XL235 on Mack Truck Fair condition but runs good. Good back up loader. Standard lever controls. Clean for its’ age. Priced to sell.

Item ID: 12066 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com Phase. 24. Emglo 5 HP 230 Volt, 1 Phase. 25. Cat Generator – 3412 Engine, 550 KW – Serial # 81Z23731. 26. 48” 3-Knife Morbark Chippac with 15 HP Trailer Loading Blower. 27. Mellot 24 ft.

Vibrating Conveyor. 28. Webster 50 ft. 8” sides Vibrating Conveyor with Saw Dust Section. 29. Rens Metal Detector in Webster

Williams 200hp Hammermill Grinder 350 Hog

1988 Multitek 2040XP2

Item ID: 12011 Contact: Daren 800.315.9950 Ext. 603

Item ID: 12015 Contact: Michelle 800.315.9950 Ext. 606

www.LBXonline.com

www.LBXonline.com

Vibrating Conveyor. 30. Saw Laser Lite for Head. 31. Misc Blades and Parts for various machines. 32.

Electrical panels. 33. Saw Motors.

More pictures available upon request. Thanks for looking. Out put 35,000 bf in one 8 hour shift. Item ID-11774 - Daren 800-315-9950 x603 Jackson Harvester Sawmill - 3 headblock carriage, 2 saw vertical edger, Mudata setworks, log turner, sawcab, almost new feedworks!!!! 2 strand live deck, Husk, newer sawcab outfeed

Save Your Stubs & Pieces!

Firewood Processor

belt. Can be bought as package or individual pieces! Can be seen running. - Item ID-11313 - Daren 800-315-9950 x603 Meadows #2 Sawmill - Meadows #2 carriage - 15’ OAL with 4 headblocks - 3 hydraulic dogs - 5 axles, hydraulic setworks with pantograph arm assembly to carry hydraulic & electric lines from carriage to husk - clock face lumber dial - controls for setworks & dogs. Meadows #2 track frame, with idler assembly. Reckart hydraulic feed package with 40-hp

electric motor. Mellott log turner.

35’ log deck with stop & load.

130KW generator. - Item ID-11086 Michelle 800-315-9950 x606 Sawmill With Chipper - Carthage carriage, helle sawmill and chipper - Item ID-11992 - Michelle 800-315-9950 x606 CONVEYORS Hurst Conveyor - Heavy duty material handling conveyor.

Manufactured in 1994. Catwalk.

Cleated 4’ wide belt. 100’ overall length. - Item ID-10821 - Michelle 800-315-9950 x606 Webster Vibrating Conveyor - 90’ Webster Virbrating conveyor one drive section one fiberglass section 12” botom - Item ID-11760 Michelle 800-315-9950 x606 DEBARKERS Mellott Debarker with 648 Rosser Head - Late 90’s year model, either 1997 or 1998. 20’ 3 strand log deck stop and load with Mellot 40’ log trough. Dual kickers and Cornell barn sweep. - Item ID11668 - Michelle 800-315-9950 x606 Precision 636 Debarker - Flat track debarker with Mellott 20’ deck.

- Item ID-11683 - Michelle 800-3159950 x606 EDGERS & GANGS 6” Edger - Edminston hydraulic edger. Early 2000 year model with electric motor. Has a 40-hp, 60 hz.

- Item ID-10864 - Michelle 800-315-

Our newest color—Light Blue

➨

Let us reprocess them $25 per 100 Now have Factory Seconds $25 per 100 sticks

12 n

December 2010

Visit us online at www.LBXonline.com!

“Henry rifles will only be made in America or they won’t be made at all.”

Anthony Imperato

President of Henry Repeating Arms

Henry .22 Lever Frontier Model with Octagonal Barrel.

An affordable, beautiful rifle with superior tack-driving accuracy. Crafted

by American workers for American shooting enthusiasts.

Henry Golden Boy .22 LR /.22 Mag / .17HMR

Henry Big Boy .44 Magnum / 45C / .357 Mag

Henry Acu-Bolt .22 LR / .22 Mag / .17 HMR

It’s not a prideful boast. It’s a solemn oath from all of us at Henry Repeating Arms. Every Henry rifle is and always will be made in America by American workers.

Decent, hard working folks like you who take great pride in their work. We won’t follow the path of other manufacturers who have their products made overseas and slap their name on them. When you read the rollmark on the barrel of a Henry, it’s going to read Made in the USA. We start with only the finest ingredients - gun barrel quality steel from Ohio, genuine American walnut from Missouri and Iowa, steel castings from Wisconsin and brass components from Pennsylvania. We manufacture a rifle that you will be proud to own – with the smoothest action, flawless reliability, and pinpoint accuracy. Made in America with the same integrity as the Henry rifle President Lincoln owned.

We are a family owned business and we stand ® behind every rifle that leaves our plant. You will find our customer service second to none, and we’ll do whatever it takes to guarantee your complete satisfaction.

We invite you to become part of the Henry family. Please order our free catalog, which includes information about our rifles, a list of dealers in your area and a free Henry decal.

Henry U.S. Survival .22 LR

For a FREE color catalog visit www.henryrifles.com or call Toll Free (866) 200-2354 9.375 x 12.125.indd 1

11/2/10 11:11:29 AM

Timberwolf Pro-HD XL

1990 Ford A64 Wheel Loader

Inline Firewood Processor

Item ID: 12032 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com

Item ID: 12013 Contact: Michelle 800.315.9950 Ext. 606 www.LBXonline.com

1974 Peterbuilt Water Truck Model 351; Good condition.

Runs and pumps water well.

Good support vehicle at low cost.

Item ID: 12060 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

2010 Was A Banner Year!

Even in a Downturn Economy.

On behalf of the ownership and staff of CRD Metalworks, we want to thank all of our customers for â&#x20AC;&#x153;Making the Cutâ&#x20AC;? with a Woodbine firewood processor. We know there are a lot of options out there...and as a family owned business itâ&#x20AC;&#x2122;s important to make solid, trusting relationships that go beyond the sale. Hereâ&#x20AC;&#x2122;s what a few of our customers have to sayâ&#x20AC;Ś

nd they were just out â&#x20AC;&#x153;Of course- I looked at (other machines)...a best machine for the best of the league on price. You guys had the price.â&#x20AC;? --BB, Massachusetts

hines that cost $60,000 â&#x20AC;&#x153;Iâ&#x20AC;&#x2122;ve seen some of the competitionâ&#x20AC;&#x2122;s mac Woodbine Junior. Itâ&#x20AC;&#x2122;s got and I can cut just as much wood with the log deck, conveyor, chip all the features at half the price â&#x20AC;&#x201C; a live fast, you can cut and split separator, 6-way adjustable wedge, itâ&#x20AC;&#x2122;s at the same time.â&#x20AC;? --Logger, Vermont

so that was a plus. Now â&#x20AC;&#x153;I wanted to go more American-made . I want to grow my Iâ&#x20AC;&#x2122;m processing 2,500 face cords this year be able to meet my growing business and with this machine I will anyone to come down here demands. I would be willing to allow ing to buy from CRD. and see that machine run if they are look iler, New York State Itâ&#x20AC;&#x2122;s a great machine.â&#x20AC;? --Firewood Reta DBACK? THE MOST IMPORTANT FEE

(@OOX (NKHC@XR EQNL 7//$").% @MC #2$ -DS@KVNQJR EQNL NTQ E@LHKX SN XNTQR

nd for a processor, that â&#x20AC;&#x153;I was impressed, when shopping arou trashing the competitionâ&#x20AC;&#x2122;s Chris & Patrick didnâ&#x20AC;&#x2122;t waste my time owledged that there equipment or business. He simply ackn that for price, value and were other good machines out there, but dbine. That closed the service- nothing held a candle to the Woo deal for us.â&#x20AC;? --Farmer, Maine

NOWâ&#x20AC;&#x2122;S Your Chance to Own a Woodbine at the Best Possible Price.

ALL REMAINING 2010 INVENTORY IS ON SALE NOW! CALL PATRICK TODAY AT 888-667-8580 FOR COMPLETE DETAILS! Call 888-667-8580 now to learn more!

WOODBINE

Firewood Processors

17 Hyde Hill Road, Williamsburg, MA 01096 www.crdmetalworks.com Email: sales@crdmetalworks.com

14 n

December 2010

Performance, Power & Profit

9950 x606 Meadows 7â&#x20AC;? X 48â&#x20AC;? Combination edger - Serial # T7-1738-99. Was once used with a shifting saw.

Some, but not all of the parts for this are present. There are three 23â&#x20AC;? split strob saws. There is an integrel hydraulic system on this machine. 8â&#x20AC;&#x2122; outfeed. 10â&#x20AC;&#x2122; infeed with hydraulic roller holdover and two air popup pushover chains. Remote operator station.

Hydraulic press roll lifter. Main shaft is 2-15/16â&#x20AC;?. There is no main motor present. There is a mast for shifting lasers but the system is not complete. Footprint of unit: 7â&#x20AC;&#x2122; X 22â&#x20AC;&#x2122; - Item ID-11733 - Michelle 800-315-9950 x606 Meadows Deluxe Edger - 4â&#x20AC;?x36â&#x20AC;?.

Very little use, in very good condition. Has a pulley system to run it. 3 interchangeable blades.

- Item ID-10900 - Michelle 800-3159950 x606 Miner Edger - 40 HP Electric motor, , 4â&#x20AC;? x 32â&#x20AC;? capacity, up to (4) blades, 7â&#x20AC;&#x2122; Infeed, 8â&#x20AC;&#x2122; outfeed - Item ID-10789 - Tom 800-315-9950 x604 Ogam chain drive open arm gangsaw. - 2 Main drive motors included. 10 HP and 30 HP. - Item ID-11744 - Michelle 800-315-9950 x606 Salem 3-Saw Edger - 60-hp motor, 4â&#x20AC;? X 48â&#x20AC;? capacity, 9â&#x20AC;&#x2122; infeed table, 17â&#x20AC;&#x2122; long picker outfeed table, hydraulic blade shift. 1990 model - Item ID-10852 - Michelle 800-3159950 x606 Schurman 4â&#x20AC;? Top arbor edger â&#x20AC;&#x153;Super Heavy Dutyâ&#x20AC;? would be an understated description of this machine. It features 50 HP on the arbor and a separate motor for the feed. There are 3 air shifting carbide saws in the 23â&#x20AC;? wide feed throat. 6 bottom and two top feed rolls. All powered. The top rolls have air lifts. All feed rolls as well as the saw portion of the arbor are chrome plated. A very well engineered, heavily built machine.

- Item ID-11763 - Daren 800-3159950 x603 Timberking Talon 900 Edger Powered by 220 volt, 3 phase electric, 15-hp motor. Has a 21â&#x20AC;? opening. Been used and stored inside a warehouse and never exposed to the elements. - Item ID11560 - Michelle 800-315-9950 x606 Vertical edger for RH mill - 50 HP, 20â&#x20AC;? F saws with carbide bits, solenoid valves, splined arbor.

Good looking edger. - Item ID11781 - Daren 800-315-9950 x603 FIREWOOD PROCESSORS 1985 Multitek 2040XP - Firewood processor located in Colorado.

Powered by a Detroit diesel engine. Runs great. Conveyor needs new tires. - Item ID-11982 Michelle 800-315-9950 x606 1988 MULTITEK 2040XP2 Firewood

Visit us online at www.LBXonline.com!

Serco 8500 Log Loader Item ID: 12007 Contact: Michelle 800.315.9950 Ext. 606 www.LBXonline.com

1997 Hyster Model H280XL Forklift with 8731 hours; 100” forks; Side Shift; Perkins engine. Enclosed cab; Good condition.

Item ID: 12045 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

1998 Prentice 310E Item ID: 12033 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com Processor - 1988 MULTITEK 2040XP2 Firewood Processor, John Deere 80 HP diesel engine, many new hydraulic parts, 20” diameter, 40’ long capacity, 865 hours - Item ID-12015 - Michelle 800-315-9950 x606 2005 2040xp2 + 30’ Conveyor 2005 2040xp2 firewood processor, 80 hp John Deere Diesel, 30’ Conveyor, 2-strand roller chain, hydraulic lift, 40’ long, 20” log capacity, 8-way wedge, 3,300 hours 5th strand live deck arm for processing blocks as short as 24” (normally a $2,000 option), Very Well Maintained Heated Operator Cabin, Pilot Electric/Hydraulic Joysticks Safety Seat, Clean Out Pan Option (normally $1,000 option - Item ID-11871 - Daren 800315-9950 x603 2005 Built-Rite model 50 SCP processor - 2005 model 50 SCP processor. Includes Auto log stop, 3 strand live deck, 4 1/2” cylinder, cab with heat & A/C, 750 hrs, 68 HP Kubota diesel - Item ID-11619 Daren 800-315-9950 x603 2005 cord king firewood proccessor - 2005 cord king firewood proccessor, 900 hours, with 30 ft. conveyor - Item ID12027 - Daren 800-315-9950 x603 2006 MULTITEK 2020CSC - One owner, ‘06 Multitek 2020CSC

firewood processor with a 2.4 L 66hp John Deere Engine, with 2000 hrs, unit is an all in one including loading deck and conveyor, heated cab, and lights, 3/4” pinch saw chain, conveyor extension for loading semitrailers. - Item ID-11900 - Daren 800-315-9950 x603 2006 Timber Wolf Firewood Processor with 26’ conveyor - 2006 Timber Wolf Firewood Processor with 26’ conveyor, 1750 Hrs, auto cycle, operator cab, Item ID-12020 - Daren 800-315-9950 x603 2007Hakki Pete 1x37 EZ - 6 hours, Auto Feed. 4 Way Splitter. Loading Conveyor - Item ID-11865 - Daren 800-315-9950 x603 2008 Wood Beaver Hakki 1x37 Firewood Processor - 2008 year model, powered by a 24-hp Honda gas engine. Includes a log deck.

Less than 100 hours. - Item ID11659 - Michelle 800-315-9950 x606 Best Value Portable Log Splitter - Small manufacturer in PA has made the best valued log splitter.

Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available.

Has Log Lift. Uses 4-way wedge adjustable to single two way.

Great Value! PA - Item ID-12062 Tom 800-315-9950 x604 Empire Firewood Processor (now is Cord King) - 2002 Empire firewood processor with low hours. 42” circle saw, 3 strand live deck that accepts log that are 25’ long and 22” in diameter. Powered by an 80-hp Cummins diesel. Less than 400 hours. 30’ conveyor is included. Has tandem axle, pintle hitch and produces 4 cords per hour. Ready to tow home and get to work. - Item ID-11980 - Michelle 800-315-9950 x606 HAKKI PETE 1X37 Firewood

When You Buy Your Circular Saws From B.H. Payne You’ve Bought the best... We Guarantee It! Traditional Quality Combined With Todays Technology Quality Brand Reg. U.S. Pat Off

Circular Saws Saw Bits and Shanks Circular Knives Carbide Tipped Saws Carbide Strobe ® Saws B.H. Payne & Company Saw Manufacturers

Call 800 752-0627

Make Sure To Ask For Our Free, Complete Saw Catalog We Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels, Knife Grinding Wheels, Saw Gumming Wheels & Knives.

Here’s What You Get With Every B.H. Payne Saw • Saws manufactured from only the Highest Quality Nickel Alloy Steel.

• Each Saw Milled with State-Of-The-Art Precision CNC Milling Machine.

• We Tension Your Saw to Your RPM Speed BEFORE Leaving Our Factory.

• Your Satisfaction - Completely Guaranteed.

B.H. Payne & Company, Inc. P.O. Box 90608 East Point, GA 30364 404 761-8711 Fax 404 761-5398 “Since 1890” E-mail: info@paynesaws.com

For Classifieds Call Your LBX REP at 1-800-315-9950

Web Site: www.paynesaws.com

The Original Lumberman’s Exchange n 15

‘92 Ford L8000

1992 GMC Truck

Processor - Manual Set-Up, 4 & 6 Way Wedge, 3 Extra Bars, 6 Extra Chains, Converted to Rim Sprocket, Hydraulic Log Lift, Serial #4702-5 includes a John Deere 850 Power Unit - Item ID-11694 - Daren 800-315-9950 x603 Simplex Chomper 14 - Chomper firewood processor, model simplex 14, will handle logs up to 14 “ in diameter unlimited length.

Can do one cord in approx 1 1/2 hours with one man, cut split and ready to go. Uses a hydraulic shear instead of a saw so no sharpening, can split two or four ways. In Maine - Item ID-11707 Michelle 800-315-9950 x606 TIMBERWOLF Pro-HD XL Inline Firewood Processor TIMBERWOLF Pro-HD XL Inline Firewood Processor, 80hp John Deere, Auto cycle, 8 way wedge, 16’ live deck, Cuts & splits up to 3 cords/hour, This machine was a demo unit and has very low hours. Also includes a partial factory warranty - Item ID-12013 Michelle 800-315-9950 x606 FORKLIFTS 1987 Hyster 25,000# forklift - 8’ forks; new Perkins diesel engine; dual front wheels; 25,000#; side shift; heat in cab. Runs great.

- Item ID-11672 - Michelle 800-3159950 x606 1995 Nissan Forklift - 15,500 lb

16 n

December 2010

Capacity, Model: DF05N70V, Diesel, Pneumatic, Side Shift, 2-Stage Mast, 177 Max Mast Height, Hour Meter Reads: 8,224, S/N: 001800 - Item ID-11892 Michelle 800-315-9950 x606 1997 Hyster Model H280XL Forklift with 8731 hours; 100” forks; Side Shift; Perkins engine.

Enclosed cab; Good condion. Item ID-12045 - Tom 800-315-9950 x604 1998 Hyster Model H80XL2 - 8135 hours; Perkins engine; Sideshift; Free Travel Boom; Lowered Boom Height: 93“ 46” Forks; Raised Fork Height: 194“; Runs and operates well. Good backup machine or for limited use. - Item ID-12049 - Tom 800-315-9950 x604 2000 Hyster H155XL Forklift 15,000 lb Capacity, LP Gas, Rough Terrain, Pneumatic, Tilt, Side Shift, 2-Stage Mast, 173.2 Max Height, Hour Meter Reads: 3,938, S/N: F006D05789X - Item ID-11893 Michelle 800-315-9950 x606 2004 Moffett Model M5500 Truck Mounted Forklift - 1418 Hours; Kubota Diesel; 4’ Forks, Side shift, 4 Way steer, 12’ Mast, Tires Front 31.5X13-16.5, Rear 31X15.5-15. If you deliver products on a truck, this forklift goes with you. Top brand in the industry. Priced to sell. - Item ID-12069 - Tom 800-3159950 x604

w/1996 Series XL235E LX235E Log Loader

w/1996 HM38 Production Drill

Item ID: 12025 Contact: Daren 800.315.9950 Ext. 603

29’ Drill Depth: Many recent upgrades – see web site listing for details; Ford CSG 300 gasoline Engine; Reinforced Table; Mechanical drive & Hydraulic bar; 18” Ring Gear Torques to 42,000 ft. lbs; Swing Base; Mounted on Tandem Axle Carrier; Auger Capacity up to 72” intermittent or 54” Constant; Carrier-1992 GMC/Volvo Diesel Tandem Axle Truck – less than 200,000 mi.

www.LBXonline.com

Item ID: 12056 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com 4500 Masse Ferguson Forklift Powered by a 3-cylinder Perkins diesel engine (completely rebuilt).

Almost new tires, 4’ forks, lift is 10’ high and has a 2 stage mast.

Is hydro-static. - Item ID-10768 Michelle 800-315-9950 x606 Case 586C Forklift - Forklift with good rubber, good brakes and runs good. Has side shift. 1982 year model. Case 4-cylinder.

ITEM IS SOLD!!!! - Item ID-11457 Michelle 800-315-9950 x606 Hyster Forklift - 2WD, LPG, Pneumatic Tires, Est 8000LB Capacity, Sideshift, ROP, Hours Shown As 3451. - Item ID-12002 Michelle 800-315-9950 x606 GENERATORS 350 KVA Cummins - Genset with 9000 hours. - Item ID-11994 Michelle 800-315-9950 x606 75KW Diesel Turbo Generator 770 hrs on it. w/ a hercules Deisel Engine & right now it’s wired for 3 phase. No fuel tank underneath it, it was a platform. Very good Condition! - Item ID-10491 - Tom 800-315-9950 x604 HOGS/WOODGRINDERS 50IN Capacity Wood Hog with Conveyor - 50 Capacity Wood Hog, Equipped with 90’ Vibratory Conveyor and 40’ Belt Conveyor,

‘00 Daewoo w/Denharco DM3500 Stroke Delimber Item ID: 12026 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com Transformer Included - Item ID12018 - Michelle 800-315-9950 x606 KNIFE GRINDERS Hanchett Band Sharpener Sharpener with stretcher and shaver - Item ID-11601 - Michelle 800-315-9950 x606 Hanchett Circular saw grinder This circular saw grinder appears to be capable of grinding up to a 36” diameter saw. Plate info: Size 724. Serial # 8109 - Item ID-11746 Michelle 800-315-9950 x606 Schneider Pattern Knife Grinder - Schneider Pattern Knife Grinder - Item ID-11743 - Michelle 800-3159950 x606 LOG BOOM CRANES 1984 BARKO 80BC, logloader, includes the International truck, sn#15298 - Item ID-11428 - Daren 800-315-9950 x603 LOGGING EQUIPMENT 1969 Fiat Allis articulating loader - 1969 Fiat Allis articulating loader with Log Forks Needs fuel tank cleaned out but works otherwise Item ID-11437 - Daren 800-315-9950 x603 1974 BARKO 160 Knuckleboom Loader Log Loaders/Stackers 1974 BARKO 160 Knuckleboom Loader Log Loaders/Stackers, Detroit engine, mounted on IH

Visit us online at www.LBXonline.com!

Mereen-Johnson 431-DC Gang Rip Saw w/ Laser Item ID: 12019 Contact: Michelle 800.315.9950 Ext. 606

www.LBXonline.com truck, with Barko 42 grapple - Item ID-11979 - Daren 800-315-9950 x603 1978 CAT 518 Grapple Skidder - 23.1x26 Tires, tires 40%, Gearmatic Winch & Esco Grapple, Center Pins are tight - Item ID11800 - Daren 800-315-9950 x603 1978 TIMBERJACK 225, DETROIT POWER-MANUAL SHIFT, Tires are 50%, Due to age of machine ares are unknown - Item ID-12031 Daren 800-315-9950 x603 1980 DEERE 540B Grapple skidder, Swinging Grapple, winch, front tires are 70% and rears are 85% or better, new batteries and a new

2001 Fastline Gator 128 Band Resaw

1990 Morbark 16 Whole Tree Chipper

Item ID: 12023 Contact: Michelle 800.315.9950 Ext. 606 www.LBXonline.com

Item ID: 11863 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com

seat. - Item ID-12010 - Daren 800315-9950 x603 1981 (est) Clark 666 Cable Skidder - Unknown hours; Many recent improvements - New 6BT8.3 Cummins with 1500 hours; New Service Brake; New Parking Brake; 23.1 x 26 tires at 50%; Runs good; Very strong power train. - Item ID12054 - Tom 800-315-9950 x604 1982 540B Grapple Skidder, New engine and Transmission 2000 hrs on both, bottom center pin is new, top has a little wear, tires are at 40% power shift Transmission.

Pictures are coming soon - Item ID-11569 - Daren 800-315-9950 x603 1984 DEERE 540B cable skidder, New 23x126 tires on rear. 8000 hrs - Item ID-11875 - Daren 800-3159950 x603 1984 DEERE 540B, cable skidder, 20,000# winch capacity, 7 ft blade, articulating, 4 cyl JD turbo dsl @ 90 hp, powershift 6 fwd/3 rev, 7 ft blade, 18,700# machine, 20,900# capacity front tires 50% reares 30% - Item ID-11566 - Daren 800315-9950 x603 1985 Treefarmer C6E Grapple

1995 Tigercat Model 720 FB w/5000 Bunching Head; 5638 Hours; Cummins 190HP; Tires: 28LX26; 2@80%; 2@30%; Paint, Fair; Body - Good; Glass, Fair; Cutting Disc Good. Runs good. Excellent value.

Item ID: 12051 Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com - Grapple, winch, complete overhaul 500 hours ago, 453 Detroit, powershift transmission, 28x26 tires are 50%, rebuilt grapple and arm cylinders, all worn hoses replaced. Winch needs shaft. - Item ID-11296 -

$ ! " $ " "! ! # # ! # " # ! # ! ! " $ ! ! # ( ! " ! ! # ! ( "! ! # # # ! $ " $ ! ! "! ! $ " # ! "! # $ "! " ! $ " " ! "! # ! ! ! " !! "

&! $ ' ! $ # $ " # ! $ $ " # # ! !# !$ ! % # ! ! ! $ ! "! ! !

" ! !

For Classifieds Call Your LBX REP at 1-800-315-9950

The Original Lumbermanâ&#x20AC;&#x2122;s Exchange n 17

For Firewood Production - Take Your Pick

The DYNA

SC-14 SC-16 OR

Both Give you High Production in an Affordable and Profitable Processor The SC-14 (pictured) Offers

6 *1 )%.% ' )0!-.(!).

6 *1!,"/' 3 , /'% +!, .%*) 6 '!2% '! *1!, +.%*)- 5 - *, %!-!'

6 ,#!

2 7 7 2 *# -%4!

6 -3 .* +!, .! *).,*' 6 /'' 1%.$ )3 +% &/+ 6 !.- /+ -.

6 ,* / .%*) ",*( 5 "/'' *, +!, $*/,

Packed and ready to go!

*Production rate may vary based upon log size, quality, power source used and operator skill.

toll free: 1.888.820.3962 local: 231.734.4433 fax: 231.734.3681 6228 60th Avenue, Evart, MI 49631

12 Years of Building Quality Machines!

Call the Dealer Nearest You!

DYNA Portable Sawmills

18 n

December 2010

Shell Forest Products, Harrodsburg, KY

Marty Shell 859.325.3694

Great Lakes Firewood, Twin Lake, MI

Dennis Blankenship 231.206.4073

Sensenig Repair, Mio, MI

Dennis Sensenig 989.848.8346

Warrick Hallet Carpentry, Glencoe, MN

Warrick Hallet 320.864.4340

PDG Sales, Medina, NY SC-16 Demo Model Available

Philip Graber 585.798.2969

North Country Hydraulics, Potsdam, NY

Ben Deschaine 315.842.0388

Riehlâ&#x20AC;&#x2122;s Sawmill Sales, Lykens, PA

Amos Riehl 717.365.3852

Lickity Split Firewood Equip., Stetsonville, WI

Clayton Szydel 715.550.1077

Timberline Landscape, Davis, WV

Bill Mollard 304.940.0749

Visit us online at www.LBXonline.com!

2/7 %,%#42)#!, %15)0-%.4 ).# 9/52 3/52#% &/2 53%$ 2%#/.$)4)/.%$

s 3QUIRREL #AGE -OTORS s 'EAR -OTORS s 7OUND 2OTOR -OTORS s 3YNCHRONOUS -OTORS s $# -OTORS

FAX TO:

s $# -OTORS #RANE AND -ILL s !DJUSTABLE 3PEED $RIVES s 'ENERATORS !# AND $# s %NGINE 'ENERATOR 3ETS s 4RANSFORMERS 3INGLE 0HASE

0 / "OX

4OLEDO /HIO

s 4RANSFORMERS 4HREE 0HASE s !CROSS ,INE -AGNETIC 3TARTERS s 2EDUCED 6OLTAGE 3TARTERS s 3AFETY 3WITCHES s 0HASE #ONVERTORS

7% !.37%2 4(% 0(/.% (/523 s 7% "59 53%$ %,%#42)#!,

1999 CBI Model 4800 Grinder

â&#x20AC;&#x2DC;04 Barko 495MH Mounted on Trailer

1680 Hours: Twin Disc Clutch; Flex reversible fan, Remote control, Weight 93,000 lbs., Tires 445/65R22.5, New teeth, Updated hammers, Full engine service just completed; Cat 3412 engine w/12 cylinders; Ready to go to work; Very good condition. Great price.

3280 hours, Hydraulics for a self propelled carrier; Bar Slasher Hydraulics; Cummins engine; Rotobec 5052 grapple. Very good condition. Poor paint.

Dry and tight.

Item ID: 12047 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com Daren 800-315-9950 x603 1987 FORD L9000, TWO BUNK OR 4 SETS OF BOSTERS, 366,000 mile, vin#A55219 tri axle, Cat 3406 diesel engine, 8LL transmission and 370 rears, prentice 120c - Item ID-11844 - Daren 800-315-9950 x603 1988 DEERE 648D - Front tire are 70% rear are 50%, Machine runs good - Item ID-11432 - Daren 800315-9950 x603 1988 FORD L9000, 425 hp Caterpillar engine, 702,000 miles, 10 Spd transmission, air ride suspension, with a Prentice

Item ID: 12065 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com knuckleboom loader - Item ID11846 - Daren 800-315-9950 x603 1988 GMC Topkick Log Truck With Prentice loader. 3208 Cat diesel, air brakes and runs good.

- Item ID-10920 - Michelle 800-3159950 x606 1989 CAT D5H TSK, WITH WINCH & FAIRLEED-GOOD PAINT-GOOD SHAPE, 6-Way - Item ID-12029 Daren 800-315-9950 x603 1989 Timberjack 480 grapple skidder - 1989 Timberjack 480 grapple skidder, 4749 hours, Cummins engine, no winch $14,000 OBO - Item ID-11852 Michelle 800-315-9950 x606 1990 FORD A64 Wheel Loader 1990 FORD A64 Wheel Loader with

2004 JD 648GIII Single Arch Grapple Skidder Well maintained; 8200 hours, engine rebuilt at 7100 hours; Price reduced to allow for new tires for buyer; Pulls strong. Motivated Seller!

Item ID: 12067 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com forks, - Item ID-12032 - Daren 800315-9950 x603 1990 Morbark 16 Whole Tree Chip Harvestor new Cat engine whole tree chipper with 16â&#x20AC;? diameter capcity, cab and grapple loader, grapple loader is in good condition, 1000 hours on new Cat engine, only 3500 original hours, new clutch, new belt, new bearings, needs some paint, some dents in the cage, but overall mechanically sound whole tree chipper. - Item ID-11863 - Daren 800-315-9950 x603 1991 Bell Super-T Fellerbuncher, Hrs: 2347, S/N: BCHxx69, Deutz 4cyl, Lever Control, Shear head, also Dangle Bar Saw included, AC system intact, 23.1 Tires - Item ID12022 - Daren 800-315-9950 x603 1991 Cat 518 grapple skidder

For Classifieds Call Your LBX REP at 1-800-315-9950

50â&#x20AC;? Capacity Wood Hog w/Conveyor Item ID: 12018 Contact: Michelle 800.315.9950 Ext. 606 www.LBXonline.com All belly pans and sheet metal were removed so the machine could be steam cleaned. All the cylinders have been packed. The radiator is rebuilt with new tanks.

New starter has been installed.

A couple of new guages were installed. New hinge pins and steering pins installed. All filters and fluids have been changed.

Many hoses have been replaced.

Winch has been rebuilt. Brakes work good. New exhaust muffler and pipe installed. Tires have about 35% tread. Seat is in good condition. New paint and decals.

- Item ID-11832 - Michelle 800-3159950 x606 1991 Hydro Ax 221 hour meter broken good tread good running condition includes bush hog attachment - Item ID-11769 Michelle 800-315-9950 x606 1991 Hydro Ax 221 John Deere, 4-cylinder Koehring 18â&#x20AC;? high speed disc saw 28L x 26 tires enclosed cab with heat and air - Item ID-11770 - Michelle 800-3159950 x606 1991 Timberjack 450B - SN:CI-2759,

The Original Lumbermanâ&#x20AC;&#x2122;s Exchange n 19

Hour Meter Reads 4652.5, Cumings Diesel, 7’ Blade, Winch, Grapple - Item ID-12036 - Michelle 800-315-9950 x606 1992 Ford L8000 with a 1996 Series XL235E Log Loader - 1992 Ford L8000, Serial # 1FDYW82A8NVA07578, TK Body Style, 307,000 miles, 225 hp, 7 speed Transmission, a/c, 410 gear

20 n

December 2010

ratio, hendrickson suspension 1996 Series XL235E Log Loader, new complete engine, 116 hp, 42” Log Grapple, - Item ID-12025 Daren 800-315-9950 x603 1992 GMC Truck with 1996 HM38 Production Drill - 29’ Drill Depth – Less than 200 hours since replacement of Bar & Barrell; 3” Kelly Bar; Funk 12,000

transmission – Less than 50 hours since rebuilt; Ford CSG 300 gasoline Engine; Rebuilt V-70 valve; Less than 100 hrs; Rebuilt Hydraulic Pump Less than 100 hrs; Reinforced Table; Mechanical drive & Hydraulic bar; 18” Ring Gear Torques to 42,000 ft. lbs; Swing Base; Mounted on Tandem Axle Carrier; Auger Capacity up to

72” intermittent or 54” Constant; Carrier-1992 GMC/Volvo Diesel Tandem Axle Truck – less than 200,000 mi. - Item ID-12056 - Tom 800-315-9950 x604 1992 John Deere 644E Wheel Loader - 7’ Bucket, 4x4, Enclosed Cab, Hour Meter Reads: 12,344, SN: DW644EB537757 - Item ID12034 - Michelle 800-315-9950 x606 1992 Prentice 180D Log Loader with Cummins engine mounted on Pitts Trailer. Good condition with 7,700 hours - Item ID-11434 - Daren 800-315-9950 x603 1993 FREIGHTLINER FLD12064ST, Detroit 60 series engine, 425 hp, 18spd transmission, 4.10 gear ratio, Barko 80 LOADER, Reman TRANS Dec. 07, Both rear end recently rebuilt, full synthetic fluids in trans & rear ends. Full double frame. Full Locking Rears.

Well Maintained Truck Bed legnth 19’6”, air ride suspension Front tires 60%, new set of drives - Item ID-11641 - Daren 800-315-9950 x603 1993 Timbco 425 - With dangle head; new under-carriage and runs great. Has all books. - Item ID-11582 - Michelle 800-315-9950 x606 1993 Timberjack 380 C Skidder - 23.1x26 rubber, Esco grapple, winch, enclosed cab, Cummins engine, rebuilt motor and transmission. - Item ID-11534 Daren 800-315-9950 x603 1994 Cat 518C Skidder - The engine was rebuilt 3 months ago.

An extra Lufkin winch is included.

Has 3400 size tires on it. - Item ID11856 - Michelle 800-315-9950 x606 1994 Hydro-Ax 611E Feller Buncher - Flotation tires at 75%, good overall condition. Works daily, 24” ax head, new injection pump, exceptionally clean operators station. - Item ID-11302 Daren 800-315-9950 x603 1994 John Deere 640E Cable Skidder - Screened in Cab, 23.1 x 26 tires Ice chains rear and Bear Paws on the front. Exellent condition. Hrs are 11,000 - Item ID11653 - Michelle 800-315-9950 x606 1994 Komatsu WA-180 - Diesel, forks (no bucket), A/C, new belts, ejection pump redone, hydraulic pump redone, differential rebuilt, center pin replaced, solid tires, runs good, good appearance. In Pennsylvania. - Item ID-11394 Daren 800-315-9950 x603 1994 Prentice 210D - Grapple built for scrap iron, straight machine, joystick controls, radio works.

Nice machine. 9600 hours. - Item ID-11301 - Daren 800-315-9950 x603 1995 Franklin 4000 w/Roto Saw - Includes a 1995 Roto Saw, 4 BT Cummins, Heat and Stereo. Runs and looks great. - Item ID-11662 Michelle 800-315-9950 x606 1995 Hydro-Ax 411E, 7236 hours,

Visit us online at www.LBXonline.com!

13*$& 50 4&-- 26*$,

1985 Multitek 2040XP Item ID: 11982 Contact: Michelle 800.315.9950 Ext. 606

www.LBXonline.com 18” Koehring Sawhead, 28L-26 Tires, 4WD, inclosed cab w/heat Item ID-11673 - Daren 800-315-9950 x603 1995 International 4700 Grapple Truck - 14’ Brush body, 4-1/2 ton boom, DT 466 engine, spring suspension, 239902 on the odometer. - Item ID-11883 Michelle 800-315-9950 x606 1995 International 9300 Log Truck - Tri-axle, with 235,000 original miles. Has 2007 Hood 7000 loader.

Drive tires are 98% stear tires are 50% and tag tires are 50%; Dayton hubs. 46,000 rears. - Item ID-11502

5x5 Chip Screen

Weinig 6-Head Moulder

1991 Bell Super-T Fellerbuncher Item ID: 12077 Contact: Daren 800.315.9950 Ext. 606 www.LBXonline.com - Michelle 800-315-9950 x606 1995 Tigercat Model 720 FB w/5000 Bunching Head - 5638 Hours; Cummins 190HP; Tires: 28LX26; 2@80%; 2@30%; Paint Fair; Body - Good; Glass - Fair; Cutting Disc Good. Runs good.

Excellent value. - Item ID-12051 Tom 800-315-9950 x604 1996 511EX Hydro-Ax With Bunching Saw Head - Hours est at 6800. Only 200 hours on factory reconditioned hydraulic motors

1996 Timbco 445-C w/22” Quadco Hot Saw Item ID: 12037 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com and pumps. Comfort cab with working air. 28L tires with chains at 50%. Saw head has side pocket for cutting larger trees. Very well maintained machine. - Item ID12072 - Tom 800-315-9950 x604 1996 Bobcat 773 skidsteer loader with bucket and flotation tires $10,000 - Item ID-11839 - Michelle 800-315-9950 x606 1996 Cat 515 Grapple Skidder John Deere winch, tires are 60%,

Newman S382 Dbl Surface Planer Jocar/Ligna Linebar Resaw

Newman G-200 Knife Sharpener

250 HP WEG Softstarter

2006 Tigercat M726D Mulcher 1690 hours; Dual Function Hydraulics allowing either mulching head or felling head use; Fecon mulching head; Comfort cab with AC/Heat/Radio. 30.5 x 32 tires at 80%; 280HP Cummins; Very good condition and ready to work.

Item ID: 12044 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com 4 bearpaw chains, - Item ID-11305 - Daren 800-315-9950 x603

Diehl Straight Line Ripsaw

USNR Edger Infeed

EXPERTLY BUILT AND SOLD ·by a company you can depend on!

8Vaa :g^X 9dhh Zmi# (%,

,%+"(')"'+%) ;Vm ,%+"(')"%%),

lll#WZc_dcZh#Xdb ZbV^a/ hVaZh5WZc_dcZh#Xdb ;^cVcX^c\ 6kV^aVWaZ For Classifieds Call Your LBX REP at 1-800-315-9950

The Original Lumberman’s Exchange n 21

on ducti ce o r P an est High t Mainten !! s D! Lowe RANTEE GUA

Trailer:

Tandem axle, 8â&#x20AC;&#x2122;6â&#x20AC;? wide, 22â&#x20AC;&#x2122;-30â&#x20AC;&#x2122; long, 11â&#x20AC;&#x2122;8â&#x20AC;? high, 5-7 tons, Electric brakes.

Saw:

Superior Carbide Slasher - Cut wood instead of sharpen chains 36â&#x20AC;? to 60â&#x20AC;? diameter, 2 ga Carbide Slasher.

Engine:

50 to170 HP or PTO Drive with userâ&#x20AC;&#x2122;s tractor.

Hydraulics:

Commercial Shearing

Splitter:

35 - 72 tons, 3-5 second cycle time; 2, 4, 6, 8, 10, 12, 14 & 21 way pkg wedge.

Capacity - 4â&#x20AC;? to 27â&#x20AC;? Log diameter 0â&#x20AC;? to 48â&#x20AC;? Block Length Lifetime warranty on the entire splitter chamber.

Infeed Conveyor:

16â&#x20AC;? - 30â&#x20AC;? long Hydraulic powered.

Clean out Hopper: Get rid of bark and wood slivers before being conveyed away.

NEW GRAPPLE SYSTEM Now Available!

2040 ROGERS ROAD, PERTH, O N TA R I O K 7 H 1 P 9 CANADA

WWW CORD MASTER COM %MAIL CORDKING CORD MASTER COM

Today!

888-219-9663

2005 Deere 748G III w/Grapple & Winch Item ID: 11976 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com 1996 Caterpillar D5H - 140-hp 10’6” 6-way blade. New undercarriage, very clean. - Item ID-11306 - Daren 800-315-9950 x603 1996 Freightliner 120c, knuckleboom mounted behind cab, Cat 10 speed. Great for picking up logs and loading. - Item ID-11435 - Daren 800-315-9950 x603 1996 GMC Topkick - Includes 3126 Cat Automatic transmission. Has an Ampiroll 90L Hook Lift installed that has 12,500 pound capacity.

Truck runs well. - Item ID-11101 Michelle 800-315-9950 x606 1996 Timbco 445-C w/ 22” Quadco Hot Saw 40 degree tilt, Selfleveling, 4000 hours on old meter, on new meter 6530 hours, Ser:# FT4C 811 012496, Reman pumps were installed with the new hour meter. May 2003, Rebuilt Cummins 6CTA installed at 1000 hrs. June 2004, 2 idlers installed at 1800 hrs. Dec 2004, New Berco rails , pads and sprockets installed at 3400 hrs. Apr. 2006, New updated swing bearing and house tilt pins .bushing installed at 3950 hrs. Dec. 2006, Pump drive and implement pump rebuilt at 4200 hrs. Apr. 2007, New Cat track motor installed at 4550 hrs. Sept.

2007, 3500 hr. used swing box from Fraley installed at 4800 hrs.

Jan 2008, All new track rollers on right side installed at 4950 hrs. Jan 2008, New saw head tilt flange installed at 5150 hrs. Sept 2008, Used boom from Fraley installed at 5230 hrs. Sept 2008, Stick cylinder resealed at 5280 hrs. Oct 2008, Main valve resealed at 5370 hrs. Oct 2008, Injector pump rebuilt at 5890 hrs. Jan 2009, Boom cylinder resealed at 6020 hrs. Feb 2009 Shaft seals in pumps, tool cylinder resealed, and new AC pump installed at 6100 hrs. Aug 2009, New saw teeth installed at 6430 hrs. Nov 2009 Item ID-12037 - Daren 800-315-9950 x603 1996 TIMBERJACK 460, CAB,

2008 Mighty Mite Portable Sawmill Item ID: 11996 Contact: Michelle 800.315.9950 Ext. 606 www.LBXonline.com AIR, DUAL ARCH/YO, OVERALL CONDITION OF MACHINE IS GOOD, 5408 hours - Item ID-11539 - Daren 800-315-9950 x603 1996 TIMBERJACK 460 Grapple skidder - 10,850 hours, 4wd, Cummins Engine, OROPS - Item ID11695 - Daren 800-315-9950 x603 1997 Bell Ultra C Feller Buncher Koehring 18” Hot Saw; 5073 hours; 28L tires with chains; Cummins 4 cylinder with 110HP; Joystick controls. Good condition - Item ID12050 - Tom 800-315-9950 x604 1997 Cat 515 Skidder - Cab has A/C. Has 28L26 tires. Engine rebuilt 9 months ago. - Item ID11857 - Michelle 800-315-9950 x606 1997 CATERPILLAR D5H TSK II, 6330 hours, 6/Way Dozer, Canopy w/Sweeps, Winch, Esco Single Function Grapple :U/C 60% approx., Pads 22in SBG R/P/B 50% SEGS 50% BAL,50% Track Guards : Front/Rear/ Side Screens, Grapples w/Ext, shipping dimensions weight 43,000lbs HEIGHT 10ft 5in LENGTH 17ft 10in WIDTH 8ft 9in - Item ID-12012 Daren 800-315-9950 x603 1997 Husky XL235 on Mack Truck - Fair condition but runs good.

Good back up loader. Standard lever controls. Clean for its’ age.

Priced to sell. - Item ID-12066 Tom 800-315-9950 x604 1997 TIMBERJACK 460 Log Skidder - 1997 TIMBERJACK 460, Timberjack 460 Log Skidder, EROPS with A/C & Heat, Serial #962609, 7303 hours - Item ID11537 - Daren 800-315-9950 x603 1998 Bell Ultra THP - Totally rebuilt, 7-1-08. engine,trans,drive motors, reconditioned a/c. New primeX 23x26 tires,new 3/4 rud

2006 Bandit 2680 Horizontal Grinder

2004 Moffett Model M5500

Only 765 hours; Cummins 400HP engine; 4’ wide fixed discharge belt, Wireless remote, Water dust suppression system, 315/80R22.5 tires. This machine is very clean in excellent condition.

1418 Hours; Kubota Diesel; 4’ Forks, Side shift, 4 Way steer, 12’ Mast, Tires Front 31.5X13-16.5, Rear 31X15.5-15. If you deliver products on a truck, this forklift goes with you.

Top brand in the industry.

Priced to sell.

Item ID: 12048 Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com multi-ring chains. New firestone rear tire. 30” dangle saw. Working daily. 5300 total hours. - Item ID11679 - Daren 800-315-9950 x603 1998 Link-Belt 2800 - Runs and

Truck Mounted Forklift

Item ID: 12069 Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com works good. 10,000 hours. Fluids changed at 9,000 hours. - Item ID11650 - Michelle 800-315-9950 x606

Tough winter weather is here, but that doesn’t mean you have to put a freeze on sawing. To maintain your production and quality, use the leading profile ground blade in the industry: Wood-Mizer Blades. Ask for the 4 or 7 degree in higher horsepower, larger sawing environments, or the 9 degree in low horsepower and smaller log applications.

Lames à bande d'alliage haute qualité

800.522.5760 | SawFaster.com Lames à bande d'alliage haute qualité

Copyright 2010, Wood-Mizer Products, Inc.

For Classifieds Call Your LBX REP at 1-800-315-9950

The Original Lumberman’s Exchange n 23

2002 Mack Granite CV713 Item ID: 11700 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com

1996 225A Timberjack Skidder Item ID: 11991 Contact: Michelle 800.315.9950 Ext. 606 www.LBXonline.com

1998 Prentice 210E mounted on trailer, joystick controls has the extra hydraulics to run a slasher or delimber but this loader has never had a delimber on it. installed new floor mat, had the seat recovered, changed all fluids and filters, resealed the joystick controls, and worked on the trailer landing gear - Item ID-11833 - Michelle 800-315-9950 x606 1998 Prentice 210E - Loader has worked on small wood yard, level controls, John Deere engine, saw hook-up, good trailer - Item ID11439 - Daren 800-315-9950 x603 1998 PRENTICE 310E, Machine is ready to work, overall condition “GOOD” - Item ID-12033 - Daren 800-315-9950 x603 1998 PRENTICE 620 WITH

PIPER’S Saw Shop 5 7 0 6 • 5 4 8 • 800 Promotional Pricing Offer Simonds Red Streak Hard Back 1-1/4” x .042 x 3/4” or 7/8” Length 13’2”

$14.27 each Tell us you saw it here!

24 n

December 2010

L im it e d T im e O n ly

DENNHARCO DHT550 COMPUTERIZED MEASURINGTOPSAW-BUTT SAW-FORESTRY CAB and 8,540 hours - Item ID11888 - Daren 800-315-9950 x603 1998 Volvo truck w/160 Barco Log Loader - 1998 Volvo truck With a Volvo diesel engine, 5 speed transmission - Air brakes 160 Barco Log Loader 4 cylinder Detroit diesel engine Hydraulic system is good Runs great - Item ID-11436 - Daren 800-315-9950 x603 1999 BELL TF120B Feller Bunchers, one owner machine, it is on D5 cat tracks, Hours not known; meter not working. - Item ID-11480 - Daren 800-315-9950 x603 1999 Cat D5C LGP w/ Mann rake new under carriage (20 hours), 4000 original hours, new Hystat system rebuilt by Cat when under warranty at 3500 hours, includes Mann rake, 6-way blade, OROPS, new paint and decals, very nice located in Michigan - Item ID11822 - Michelle 800-315-9950 x606 1999 TIMBERJACK 460 Grapple Skidder, Single Funct Grapple, 30.5 Tires, hours 9999, Serial # : 995940 - Item ID-11696 - Daren 800-3159950 x603 2000 Daewoo with Denharco DM3500 stroke delimber - 2000 Daewoo with Denharco DM3500 stroke delimber, this is a bank repo an is open to offers - Item ID12026 - Daren 800-315-9950 x603 Morbark 30/36 New $30,000 upgrade done by factory including HD drum, new belts, bearings Hyd. pump. babbitt knives cat 3306 turbo engine with 335 HP new brakes, new paint and decals no leaks or drips never any trouble with engine. This 2001 is in great shape and ready to work!!

- Item ID-11804 - Michelle 800-3159950 x606 2000 TIMBERJACK 460 Skidder, 30.5 ISD Tires, 6BTA Cummins, 120 Esco Grapple, 8900 hours - Item ID-11538 - Daren 800-315-9950 x603 2002 773G Bobcat - Has 3900 hours and a Kubota diesel. - Item ID-11497 - Michelle 800-315-9950 x606 2002 Case 90XT Skidloader - has 1950 hours, 7’ bucket. - Item ID11675 - Michelle 800-315-9950 x606 2003 Cat 247 Track Skidloader New rear bogie wheels, hydraulic quick attach, vertical lift self leveling bucket. Machine has only 1100 hours. Was well maintained and is ready to work. - Item ID11348 - Daren 800-315-9950 x603 2003 Cat 525B Grapple Skidder, S/N 3KZ00897, 10,496 Hours, EROPS, ESCO Grapple w/ winch, 30.5 X 32 Tires 60%. Machine is in Tennessee - Item ID-11986 - Daren 800-315-9950 x603 2003 Morgan 2-Saw Trimsaw, this machine was bought new and

Visit us online at www.LBXonline.com!

never was really used, less than 50 hours if that, machine has never been painted it wwas just not used. - Item ID-11904 - Daren 800-315-9950 x603 2004 Barko 495MH Mounted on Trailer - 3280 hours, Hydraulics for a self propelled carrier; Bar Slasher Hydraulics; Cummins engine; Rotobec 5052 grapple.

Very good condition. Poor paint.

Dry and tight. - Item ID-12065 Tom 800-315-9950 x604 2004 BARKO 495ML, 7068 hours, heat and air works great, 6cyl Cat s/n#3539, Strong loader and is ready to work - Item ID-11905 Daren 800-315-9950 x603 2004 Bobcat S185 w/ high flow 2004 Bobcat S185 skidsteer, turbo diesel, 56 HP, 1700 hours, wellmaintained skidsteer, everything is working. - Item ID-11840 Michelle 800-315-9950 x606 2004 Cat 287B - 2004 year model, on tracks. 1390 hours. Cab with A/C and hand controls. Tooth bucket. This is a one owner machine. - Item ID-11652 - Michelle 800-315-9950 x606 2004 DEERE 648G III, 1420 hrs, 50% on tires, Pins are tight - Item ID12030 - Daren 800-315-9950 x603 2004 JD 548GIII Grapple Skidder - 3900 hours. Enclosed cab with heat and air. Single arch grapple with winch. Front blade. 23.1 x 26 tires at 80%. Very well maintained and in very good condition. - Item ID-12040 - Tom 800-315-9950 x604 2004 JD 648GIII Single Arch Grapple Skidder - Well maintained; 8200 hours - engine rebuilt at 7100 hours; Price reduced to allow for new tires for buyer; Pulls strong.

Motivated Seller - Item ID-12067 Tom 800-315-9950 x604 2005 Bobcat S175 w/ grapple bucket - 2005 Bobcat S175 945 hours, always stored indoors, keyless entry, backlit status screen, new microfiber seat, high flow, includes grapple bucket, good tires, dealer maintained.

- Item ID-11842 - Michelle 800-3159950 x606 2005 CAT 525B Grapple Skidder, 8100 hours, EROPS w/ AC Single Arch w/ Grapple & Winch tires are 25% - Item ID-12028 - Daren 800315-9950 x603 2005 DEERE 748G III with Grapple and Winch, 5,654 hours, NEW Center Section, 30.5x32 Tires, Tires ar 75% all around, This is a super nice Skidder and is working daily - Item ID-11976 - Daren 800315-9950 x603 2005 John Deere 550J - This has only 1981 hours, has a cab with A/C, 24” pads, rear cab screens and front limb risers.

The pins and bushings have been turned and the sprockets have been replaced. - Item ID-11661 -

1992 John Deere 644E Wheel Loader Item ID: 12034 Contact: Michelle 800.315.9950 Ext. 606

www.LBXonline.com Michelle 800-315-9950 x606 2006 Cat 420E Loader Backhoe - Comfort cab with AC/Stereo; Extend-a-hoe; 400 hours; Aux hydraulics; 4 WHEEL DRIVE; 24” back hoe bucket - Item ID-12071 Tom 800-315-9950 x604 2006 Cat D6R Dozer with Semi-U Blade - 2821 Hours; 24“ pads. 12’4“ Blade, Power tilt blade, Runs and operates good. Under carriage good, sprockets, rails, and pads good; Cab & Air; Cat C-9 Diesel Engine. - Item ID-12058 - Tom 800315-9950 x604 2006 Caterpillar 287B Track Skidloader - Hydraulic quick attach, vertical lift, self leveling 83” bucket, auxillary hydraulic.

600 hours. - Item ID-11352 - Daren 800-315-9950 x603 2006 Eco-Log 580B - 2700 hours.

Powered by a 250-hp Cat diesel engine. Logmax 7000b Harvesting head. Very motivated seller. - Item ID-11250 - Michelle 800-315-9950 x606 2006 JD 444J - Front end loader with 48” paddle clamp forks along with spare 2.5 yd bucket. Only 720 hours of limited use at small mill.

20.5 x 25 tires at 95%. Cab W/ heat & air, Coupler, Ride control, Radio & 3rd valve. Like new condition. Item ID-12041 - Tom 800-315-9950 x604 2006 JD 700J XLT Dozer - 1075 Hours. Excellent condition. Very well maintained. Comfort cab with air and stereo. Work light package.

Undercarriage at 90%. - Item ID12073 - Tom 800-315-9950 x604 2006 NEW Fuchs 460 Log Loader - 44’ Reach. 212 Demo Hours.

Rotobec 5012 Grapple. Hydraulic raising cab for excellent operator visibility. Priced well below dealer cost. Motivated Seller. Great storage yard machine. - Item ID12064 - Tom 800-315-9950 x604 2006 PRENTICE 384 mounted on a Mack Truck - 2006 PRENTICE 384 mounted on a Mack Truck, 4600 hours, has been on a yard since

2008 Dynamic 570 Chipper 1900 hours; New drum and feed wheel. Priced to move. MS Item ID: 12061 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com 2006 - Item ID-12008 - Daren 800315-9950 x603 2007 Barko 930 Mulcher - 300HP Cummings Engine, Hydraulic Winch with an FAE 300U Mulcher; Approx. 3500 hours (must be confirmed); Tires 80%; Clean and dry and ready to work. Good condition. - Item ID-12052 - Tom 800-315-9950 x604 NEW 2008 ASV Posi Track RC100 skidsteer loader, has low and high flow, only 600 hours! Posi Track R-series see one in action! mfg

2004 Bandit 3680 Beast Horizontal Grinder Item ID: 11819 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com info The RC-100 is powered by the Perkins 1104C-44T turbocharged diesel engine. It is a 4.4 liter 4-cylinder diesel engine that offers high output with low emissions and low sound. - Item ID-11859 Daren 800-315-9950 x603 2008 Bobcat S175 - 2008 Bobcat S175 only 17 hours!, 46 HP, 68” low-profile bucket, 8 bolt-on teeth Weight: 6,001 - 6,500 lbs $24,000 OBO - Item ID-11841 - Michelle 800-315-9950 x606 2008 JD 843J - Wheeled Feller

REAL TUFF BALER&BAGGERTM Save $$$ on Bedding—Bale it Yourself!

Electric or Diesel, Manual or Automatic

$13,907

BUILT TO LAST Real Tuff Baler Dimensions & Specifications

:Vhn id jhZ 7j^ai d[ ]^\] fjVa^in bViZg^Vah VcY ldg`bVch]^e =ZVkn Yjin id ZcVWaZ V WgdVY heZXigjb d[ WVa^c\ dei^dch :Vh^an adVYh Wn XdckZndg dg bVcjVa bZi]dY

- (2) Hydraulic Cylinders are controlled by using a two spool valve - 30 H.P. motor (220/440 volt 3 phase) starter not included - 25 G.P.M. Pump - 50 Gallon reservoir capacity - Only the highest quality industrial components are used

6)%0 89** -2(9786-)7

Phone: (325) 641-8300 Fax: (325) 643-3243

For Classifieds Call Your LBX REP at 1-800-315-9950

Manufactured by M & F Gauge & Specialty Co., Inc. PO Box 693 • Brownwood, Texas 76804 www.realtuffbaler.com

The Original Lumberman’s Exchange n 25

CAT D6R Dozer w/Semi U Blade Enclosed ROPS Cab with Air; 2821 hours; Power Tilt Blade. Very good condition Item ID: 12058 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com Buncher with FD-22 Bunching Head; 30.5 x 32 tires at 80%; 2900 hours; Clean and dry; No leaks; Excellent Condition - Item ID12039 - Tom 800-315-9950 x604 2008 Valmet 603 Three Wheeled Feller Buncher - 3700 hours; Valmet 218 Saw Head; 28” tires at 70%; Rear tire 20%; Cummins 4-cyl, 130 HP uses 4.5 gal/hr.; Good condition - Item ID-12053 Tom 800-315-9950 x604 225A Timberjack Skidder - In ready to work condition. 1986 year model with a 353 Detroit engine. - Item ID-11991 - Michelle 800-315-9950 x606 230 Timberjack Forwarder - Late 70’s model forwarder. Is powered by a Detroit 353, has a Husky Brute loader, tire size is 24-5-32.

Engine completely rebuilt 3000 hours ago. - Item ID-11993 Michelle 800-315-9950 x606 510 International Wheel Loader Please call for information. Photos coming soon. - Item ID-11990 Michelle 800-315-9950 x606

26 n

December 2010

1991 TIMBERJACK 450B Item ID: 12036 Contact: Michelle 800.315.9950 Ext. 606 www.LBXonline.com 518 Cat Grapple Skidder - Late 80’s 4WD Drive; Cat winch, maintained machine.; 30.5 x 32 Tires, 95% rubber. 130-hp, all pins are good.

- Item ID-11078 - Tom 800-315-9950 x604 98’ 620 Prentice Track Cutter Quadco saw / 80% under carriage / rebuilt finals / John Deere engine 6,000 hrs. on it. - Item ID-10479 Tom 800-315-9950 x604 Barko 160A with Chop Saw - 1992 year model. Chop Saw 2000 or 2001 included. - Item ID-11117 Michelle 800-315-9950 x606 Barko Fellerbuncher 785 - 1999 year model with a 22” Koehring head. - Item ID-11334 - Daren 800315-9950 x603 Bell Super T - 1992 year model, serial number BCH3953, 23.1x26 tires. Needs a head - Item ID-11898 - Michelle 800-315-9950 x606 Bell Ultra C - 1997 year model, with Cummins 3.9 110-hp 4 cylinder diesel engine. A/C in cab.

18” Koehring saw felling head, joystick controls. 600 hours on Reman Cummins engine; 5073 total hours on machine. Very good condition. - Item ID-10803 -

1996 Barko 275B Item ID: 12076 Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com Michelle 800-315-9950 x606 Bell Ultra T - 1997 year model with 1989 hours. 23.1 tires are at 90%, joystick controls, extra 24” bars, new seat, no dents or broken glass. Dangle head. Currently working. A/C in cab. S/N BCH4648 - Item ID-10727 - Michelle 800-3159950 x606 Bobcat 843B Loader - Grapple loader, photos and more info coming soon. - Item ID-10777 Michelle 800-315-9950 x606 Mid 70’s Fork Lift 580 Case, High Lift, Good Condition - Item ID11493 - Daren 800-315-9950 x603 Cat 242B Skidsteer - 2006 year model. 300 hours on machine. Cat engine. Includes bucket, forks, spare tire and chains. - Item ID10845 - Michelle 800-315-9950 x606 Cat 518 Grapple Skidder - 1980 year model with grapple, winch and canopy. Hours unknown; no meter. - Item ID-11103 - Michelle 800-315-9950 x606 Cat 518C Grapple Skidder - 1995 year model. With grapple & winch.

12000 hours - 200 hours since engine and transmission were rebuilt. Really good condition.

Tires are 28 X 46. Open cab. - Item

ID-11293 - Michelle 800-315-9950 x606 Cat 545 Grapple Skidder - 2003 year model. Please call for information. - Item ID-10996 Michelle 800-315-9950 x606 Cat 545 Grapple Skidder - 2004 year model. Call for more information. - Item ID-10997 Michelle 800-315-9950 x606 Cat 8000# Forklift - 1985 year, V80E type d. Axle repaired and transmission fixed. - Item ID-10674 - Michelle 800-315-9950 x606 CAT D4H TSK WITH WINCH AND FORESTRY PKG - CAT D4H TSK WITH WINCH AND FORESTRY PKG. Is a year 1987. Only 7500 original hours. - Item ID-12024 Daren 800-315-9950 x603 Cat D5M XL Dozer - With EROPS, Sweeps and screens. 50,000 pound W5C winch. 3490 hours. New factory log arch. Very clean and straight machine. - Item ID-11253 Michelle 800-315-9950 x606 Caterpillar D6R - Caterpillar D6R with winch, hours 8211, s/n 5LN00696 - Item ID-11906 - Daren 800-315-9950 x603 DEERE 440, sn#090370, with a winch - Item ID-11431 - Daren 800315-9950 x603 Ford Tractor with Trailer - 1989 Ford Tractor truck with 48’ Great Dane Trailer - Item ID-10671 Michelle 800-315-9950 x606 Franklin 105 and shred king forestry machine - Both units powered by detroit engines, excellent condition, will separte the units, also have 16” Morbark sheer head for the franklin. serial#fe0159 Model #8000FE Item ID-10415 - Michelle 800-3159950 x606 Gehl 3935 Skidloader - 2005 year model with less than 2000 hours.

- Item ID-10643 - Michelle 800-3159950 x606 Gehl 7800 Skidloader - 2004 year model with enclosed cab. Has

Visit us online at www.LBXonline.com!

radio and heat. - Item ID-11649 Michelle 800-315-9950 x606 Gyro Trac GT25 - Machine has 1278 hours. - Item ID-11801 Michelle 800-315-9950 x606 Hokah mill tie trim and stack station - The electric eye which stops the ties on this 8’ - 12’ trimmer is adjustable so that the sawyer can determine to trim more off one end or the other.

Conveyors to take away cut off blocks are part of the system as is the stacker. This item has it’s own integral hydraulic unit in the base.

- Item ID-11724 - Michelle 800-3159950 x606 Hood 28000 Loader - Year model 2004; 72” hot saw; only 340 hours.

- Item ID-11418 - Michelle 800-3159950 x606 Hyundai with 2 Head Roller - 1994 Hyundai with 820 roller stroke Lakewood head. - Item ID-10977 Michelle 800-315-9950 x606 JCB 540 Wheel Loader - 2000 Year model. 4X4, 2-1/2 yard quick attach bucket, Extenda hoe, cab with heat and A/C, 5628 hours, one owner and well maintained.

- Item ID-10774 - Michelle 800-3159950 x606 John Deere 240 - Skid Loader 52HP 1785 Hours. Excellent Condition. 12x16.5 Tires 75% More Details Soon. THANKS FOR

LOOKING. - Item ID-11799 - Daren 800-315-9950 x603 John Deere 290 - With Elite processing head, 2 roller. 4 cylinder John Deere engine. Very good undercarriage. - Item ID10934 - Michelle 800-315-9950 x606 John Deere 410D - Backhoe, front end loader, new tires, starts easy and runs great. - Item ID-10726 Michelle 800-315-9950 x606 John Deere 548 D Grapple Skidder - John Deere 548 D Grapple Skidder, 23/1x26 rubber at 90%.

Enclosed cab, no winch. - Item ID11558 - Daren 800-315-9950 x603 John Deere 640E Cable Skidder - 1995 year model. 500 hours on new motor. Has new winch, new center, new batteries and heavy duty rears. This machine runs great and is ready to go to work. Item ID-11330 - Daren 800-315-9950 x603 John Deere 640E Skidder - 1993 year model, 6 cylinder, powershift transmission, no leaks - Item ID11989 - Michelle 800-315-9950 x606 John Deere 643D - 1995 year model. 22” kohring sawhead. tires are 70%, Motor is new replaced last month, 8000 hours on machine. heated and A/C cab. Item ID-11414 - Daren 800-315-9950 x603 John Deere 648D Skidder - Has

2007 Barko 930 Mulcher

2006 NEW Fuchs 460 Log Loader

300HP Cummings Engine, Hydraulic Winch with an FAE 300U Mulcher; Approx.

3500 hours (must be confirmed); Tires 80%; Clean and dry and ready to work. Good condition.

44’ Reach. 212 Demo Hours. Rotobec 5012 Grapple. Hydraulic raising cab for excellent operator visibility. Priced well below dealer cost.

Motivated Seller. Great storage yard machine.

Item ID: 12052 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com new hydraulic pumps, has winch, runs great, 8332 hours. - Item ID11711 - Michelle 800-315-9950 x606 John Deere 650H - 2000 year model in great condition.

Item ID: 12064 Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com 10’6” blade with 24” new pads.

Hydrostatic transmission. 4795 hours. 90-hp. - Item ID-10560 -

Our New Shaving Mills <^kZ Ndj

Vi Vc

Big Production Affordable Price!

Our New Shaving Mills Give You Big Production at an Affordable Price!

UÊ9 ÕÀÊV ViÊ vÊx¿Ê ÀÊn¿Ê `i Ã

Ndjg X]d^XZ d[ * dg - bdYZah UÊ* ÜiÀi`ÊLÞÊ Þ`À>Õ VÊÀ> ÌÞ«iÊÃÞÃÌi EdlZgZY Wn ]nYgVja^X gVb"ineZ hnhiZb UÊ i>ÌÕÀiÃÊÌÜ Ê ÀÊÌ ÀiiÊ{Ó¸Ê }Ê`Þ > V> ÞÊ L> > Vi`Ê i>`ÃÊÜÉnÊ ÛiÃÊ«iÀÊ i>`

;ZVijgZh ild dg i]gZZ )' adc\ dynamically balanced ]ZVYh UÊ i>`ÃÊ>ÀiÊ ÊV ÃÌ> ÌÊ«À `ÕVÌ ]ÊÀi}>À` iÃÃÊ v l^i] -"`c^kZh eZg ]ZVY Ê L ÝÊÌÀ>Ûi Ê` ÀiVÌ

=ZVYh VgZ ^c XdchiVci egdYjXi^dc! gZ\VgYaZhh d[ Wdm igVkZa UÊ >V Ên¸Ê` > iÌiÀÊ i>`Ê ÃÊ« ÜiÀi`ÊLÞÊ>ÊxäÊ «ÊÊ Y^gZXi^dc i iVÌÀ VÊ Ì À :VX] - Y^VbZiZg ]ZVY ^h edlZgZY Wn V *% ]e ZaZXig^X bdidg UÊ Ê«À `ÕVÌ ÊpÊ1«ÊÌ ÊxäÊVÕL VÊÞ>À`ÃÊ«iÀÊ ÕÀt

=^\] egdYjXi^dc ¶ Je id *% XjW^X nVgYh eZg ]djg

Expertly builtBUILT and sold

by SOLD a EXPERTLY AND

·by a company youdepend can depend company you can on.on!

> Ê À VÊ ÃÃÊ­iÝÌ°ÊÎäÇ®

8Vaa :g^X 9dhh Zmi# (%,

800-241-8983 ,%+"(')"'+%) ;Vm ,%+"(')"%%),

>cYjhign»h Bdhi IgjhiZY HdjgXZ

ÇäÈ ÎÓ{ ÓÈä{ÊÊUÊÊFAX 706-324-0047

lll#WZc_dcZh#Xdb ZbV^a/ hVaZh5WZc_dcZh#Xdb ;^cVcX^c\ 6kV^aVWaZ ÜÜÜ°Li iðV ÊÊUÊÊi > \ÊÃ> iÃJLi iðV ÊÊUÊÊFinancing Available For Classifieds Call Your LBX REP at 1-800-315-9950

The Original Lumberman’s Exchange n 27

2006 JD 700J XLT Dozer 1075 Hours. Excellent condition. Very well maintained. Comfort cab with air and stereo.

Work light package.

Undercarriage at 90%.

Item ID: 12073 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com Michelle 800-315-9950 x606 John Deere 843H - 2001 year model. 28/26 tires at about 60%.

Waratah head, all pins are tight and sheet metal is straight. - Item ID-11337 - Daren 800-315-9950 x603 Koehring Hot Saw - 22” head.

Very good condition. The bottom pin is 2” around and 12” long. The top pin is 2-1/2” around and 4-3/8” long. - Item ID-11469 - Michelle 800-315-9950 x606 Manitou MLT523 - MLT523 Turbo, 2005 year model, Perkins diesel, new front foam filled tires, rear tires are good. 17’ height reach and 8’ straight out, 4 or 2 wheel steer, enclosed cab with air and heat, 1750 hours, has extra grapple bucket. - Item ID-11605 Michelle 800-315-9950 x606 Massey Ferguson 6170 Tractor This tractor is a year model 1998; it has air in the cab, shuttle shift, 85 to90% rubber on the tires and only 2468 hours. It is 120-hp. Is 4-wheel drive. - Item ID-10546 Michelle 800-315-9950 x606 Metavic Log Loader trailer - Log loader trailer is 2 years old, has 12’ boom with a 30” grapple. 12’ bunk, will hold 20” logs/polewood, has 6500lb winch, 110’ 5/16” cable. - Item ID-11362 - Daren 800315-9950 x603 Mitsubishi Log Loader - High cab, 66,000 weight, low use with good undercarriage. Has a new starter.

Has grapple - Item ID-10780 Michelle 800-315-9950 x606 MODEL 1300 SELF CONTAINED TUB GRINDER - MODEL 1300 SELF CONTAINED TUB GRINDER, CAT DIESEL ENGINE, READY TO WORK, CAB W/ A/C - Item ID11792 - Michelle 800-315-9950 x606 Morbark Tree Shear - 20” Morbark

1996 511EX Hydro-Ax w/Bunching Saw Head Hours est. at 6800. Only 200 hours on factory reconditioned hydraulic motors and pumps.

Comfort cab with working air. 28L tires with chains at 50%. Saw head has side pocket for cutting larger trees. Very well maintained machine.

Item ID: 12072 Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com SB52 Superbuncher tree shear.

- Item ID-11468 - Michelle 800-3159950 x606 Prentice 180 Loader - Please call for information - Item ID-10917 Michelle 800-315-9950 x606 Prentice 210D - 1991 year model, 30’ boom and S&M Trailer. 6 cylinder BT Cummins (about 140hp) - Item ID-10602 - Michelle 800315-9950 x606 Prentice 310E Knuckleboom Loader - 1999 year model, with CTR delimber, air & heat, Cummins power and 7900 hours - Item ID-10916 - Michelle 800-3159950 x606 Prentice 720 Processor - With 33” Timbco Sawhead, 8.3 Cummins diesel engine, 5400 hours. Also track chains & sprockets are about 40%. - Item ID-11318 Michelle 800-315-9950 x606 Serco 8500 Log Loader - Model 8500, Not mounted - Item ID-12007 - Michelle 800-315-9950 x606 Skylead Yarder - $40,000 in new parts. Brand new motor 300 hours ago; new turbo, injector pump, new lines, new radios, new batteries, new haulback brake, new drive chain, strawline brake, etc. In good condition. 1999 year model. - Item ID-11527 - Michelle 800-315-9950 x606 Tigercat 860 Stroke Delimber 1999 year model bought new in 2001. Excellent condition and ready to work. Delimber is a

Denharco DM3500. Machine is a one owner, one operator machine.

- Item ID-11886 - Michelle 800-3159950 x606 Timbco 425 Feller Buncher - 1996 year model with Quadco hot saw. 40” tilt, new pump and drive motor. Great shape. - Item ID11031 - Michelle 800-315-9950 x606 Timbco 425 with Bar Saw Head - 2002 year model powered by a 260-hp Cummins engine. Has 33” Timbco Bar saw head. Has 3300 hours, in good condition and very work ready. - Item ID-11340 Michelle 800-315-9950 x606 Timbco Forwarder - 1998 year

For Classifieds Call Your LBX REP at 1-800-315-9950

model with 10,000 hours. - Item ID11599 - Daren 800-315-9950 x603 Timberjack 230D Skidder 3-cylinder Detroit diesel. Hercules winch. Tires are good. Needs to be jumped across the starter, needs new starter and cylinoid.

- Item ID-10561 - Michelle 800-3159950 x606 Timberjack 380 - Dual function grapple with winch. 30.5.32 rubber. 453 Detroit diesel. - Item ID-11072 - Michelle 800-315-9950 x606 Timberjack 380 Grapple Skidder Esco grapple, 453 Detroit Engine.

Engine and transmission are

Comin gS 4 New oon Mode ls

Beaver Model 18

The Original Lumberman’s Exchange n 29

LATE 70â&#x20AC;&#x2122;S

230 Timberjack Forwarder Item ID: 11993 Contact: Michelle 800.315.9950 Ext. 606

1997 Morbark 1200 Tub Grinder Item ID: 12035 Contact: Michelle 800.315.9950 Ext. 606

www.LBXonline.com

www.LBXonline.com

strong, pins are tight. 1980 Year model. - Item ID-10950 - Michelle 800-315-9950 x606 Tree Farmer 3600 - 3 wheel, hotsaw attachment, 24.5x32 rubber, 6 cylinder Cummins and 6700 hours. 1999 year model.

- Item ID-10659 - Michelle 800-3159950 x606 Valmet 546 - 1991 year model, 955 head, 6 wheel drive. - Item ID10724 - Michelle 800-315-9950 x606 LOG TURNERS 2 Strand Deck - 16 foot long.

70inch c to c 2 strand deck.

Elecric Drive. Has front side singulator. - Item ID-11782 - Daren 800-315-9950 x603 Log deck headframe with Mellott chain turner. - Deck is intended

SHAVING MILL

$24,999

UĂ&#x160; 24â&#x20AC;?w 2-head Mill with 4-knives in each headâ&#x20AC;&#x201D;easy knife adjustment.

UĂ&#x160; Box is 48â&#x20AC;? long and 30â&#x20AC;? deep UĂ&#x160; Includes cutter-head drive motors and hydraulic unit UĂ&#x160; Weighs more than a Jackson of comparable size

>cYjhig^Va BVX]^cZ :c\^cZZg^c\

Optional: Conveyor, Electrical Panel, Portable Power Set-up (PTO or Diesel) Trailer Package

We also offer:

UĂ&#x160; Furnaces UĂ&#x160; Knife Sharpeners UĂ&#x160; Conveyors UĂ&#x160; Log Decks UĂ&#x160; Cutterheads UĂ&#x160; Baggers

!"#$%&'(%)*+,%)-./01$2342+1( 53627(+.0(+.8()69( :6;(/%06'(9994<)-./0#$2342+1

877-847-5877 30 n

December 2010

for a RH mill. Chain spacing as viewed from carriage Right to Left: 0â&#x20AC;?-60â&#x20AC;?-118â&#x20AC;?. Turner is at 45â&#x20AC;?. Stop & Loader and deck drive shaft are 2-7/16â&#x20AC;?. Gearmotor is 3 HP (3 phase) with #100 Roller chain drive. Unit size: Length-132â&#x20AC;?

Width-77â&#x20AC;? height-64â&#x20AC;?. Sprockets are 1â&#x20AC;? wide at tooth area. 12 tooth.

2-5/8â&#x20AC;? spacing. Would work for H-78 chain. - Item ID-11778 - Daren 800-315-9950 x603 Mellot log turner & Hydraulic system - The Mellot Log Turnner Comes With With Joystick Control Valve And Hydraulic System. Item ID-11752 - Daren 800-315-9950 x603 MISCELLANEOUS 9x30 Trommel Screen - This trommel is in good overall condition and is available immediately. Price includes trailer loading. The electric motors and pump for the hydraulic system is also included as well as sheet metal cover and the support structure. Belly conveyor has been sold seperately. Low hours.

- Item ID-11471 - Michelle 800-3159950 x606 Armstrong No. 4 Band Saw Sharpener - Right handed, automatic. Complete with motors, starters, carbide face plate, â&#x20AC;&#x153;Sidewinderâ&#x20AC;? feed finger, one set of cams and a set of post brackets. - Item ID-10564 - Michelle 800-315-9950 x606 Container - Refrigerated Electrical motor controls installed in this 40â&#x20AC;&#x2122; container, several solid state reduced voltage starters, other starters, breakers, main transformer, etc. - Item ID-10957 Michelle 800-315-9950 x606 Cooks Sharpener - Electric band sharpener - Item ID-10898 Michelle 800-315-9950 x606 Dip Tank System - Installed in 1996. Tank is 10â&#x20AC;&#x2122; wide X 20â&#x20AC;&#x2122; long X 94â&#x20AC;? deep. Infeed deck is 21â&#x20AC;&#x2122; long X 13â&#x20AC;&#x2122;6â&#x20AC;? wide. Infeed rollcase is 20â&#x20AC;&#x2122; long X 66â&#x20AC;? wide. Infeed drive is 10-hp. Outfeed rollcase is 45â&#x20AC;&#x2122; long X 66â&#x20AC;? wide. 2 storage decks, one is 20â&#x20AC;&#x2122;L X 11â&#x20AC;&#x2122;3â&#x20AC;?W the other is 20â&#x20AC;&#x2122;L X 10â&#x20AC;&#x2122;3â&#x20AC;?W. Hydraulic unit is 50-hp, 3 phase. New cost $230,000.00. (Building in photos is not included.) - Item ID-10850 Michelle 800-315-9950 x606 Elec Route MD 500 metal detector.

- Elec Route MD 500 metal detector. Coil unit 03100. 52â&#x20AC;? hex opening. (32â&#x20AC;? flats.) Distance thru: 59â&#x20AC;?. - Item ID-11756 - Daren 800315-9950 x603 Galvanized duct piping - 300â&#x20AC;&#x2122; of 18â&#x20AC;? - $5.00 per foot..... 300â&#x20AC;&#x2122; of 20â&#x20AC;? $6.50 per foot..... 50â&#x20AC;&#x2122; of 36â&#x20AC;? - $11.00 per foot..... 35â&#x20AC;&#x2122; of 48â&#x20AC;? - $17.00 per foot..... - Item ID-10848 - Michelle 800-315-9950 x606 Goeing Kerr Tek Tamet metal

Visit us online at www.LBXonline.com!

'JOBODJOH "WBJMBCMF

SHRINK WRAP FIREWOOD/WASTEWOOD

2006 Timber Wolf Firewood Processor

Sell Your WOOD – $300/cord or More!

w/26’ Conveyor

Double or triple your profits by shrink wrapping wastewood - forewood with WOOD-PAKer! Attractive various size packages can be obtained with our high production, easily operated and affordable machines. Eight machines available. The ideal equipment for producing square bundles-palletizable for ease in storage and transporting.

Inquire for free details. Video and Package samples at nominal fee.

Item ID: 12020 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com

B & B ManufacturingÊUÊÎääÇÊ7iÃÌÊ, ÛiÀÊ, >`ÊUÊ" i> ]Ê 9Ê£{ÇÈä

4OLL &REE > \ÊLL v}JëÀÞ iÌ°V ÊUÊ7iL\Ê ÌÌ«\ÉÉ i°Ã«ÀÞ iÌ°V ÉHLL v}É detector. 50” x50” opening.

Distance thru: 48-1/2”. - Item ID11755 - Daren 800-315-9950 x603 Hough 65 Motor for Salvage - w/ a good cummins CN6 motor & converter. - Item ID-10480 - Tom 800-315-9950 x604 Loading Ramp - Adustable height ramp, 66” x 30’. 15,000 pound capacity. - Item ID-10596 - Michelle 800-315-9950 x606 Lumber Carts - 15 carts available.

Fairly new, very little use. $450.00 each. - Item ID-10904 - Michelle 800-315-9950 x606 Lumber Carts - New - Either with US or import casters. Can also get with adjustable back-stop $750 each with US casters, $700 each with import casters, add $225 to either for adjustable backstop.

Call with any questions. - Item ID10906 - Michelle 800-315-9950 x606 MDI Metal Detector - The opening dimensions of this MDI magnetic metal detector are as follows: Width-46”, height-38” distance thru: 36”. - Item ID-11754 - Daren 800-315-9950 x603 Milling machine - Cincinnati #2 vertical milling machine. - Item ID11797 - Daren 800-315-9950 x603 Read Screen All RD90A - 1989 year model with two-deck screen, 2” top screen and 3/4” bottom screen. In great shape, has 2025

hours. - Item ID-11088 - Michelle 800-315-9950 x606 Round table - 12’ round turn-table in like new condition. - Item ID11467 - Michelle 800-315-9950 x606 Salem Hydraulic Unit - 20-hp, 1745 RPM, 1-1/2 hp circulating motor with 1720 RPM, Denison pump - Item ID-10851 - Michelle 800-3159950 x606 Wood Storage Silo - Two available.

14’ diameter X 30’ cylinder size.

Caged ladders & guardrail with toe bar. Metering bins with discharge augers. Internal “Flying dutchman” system. Wood or paper storage. - Item ID-10814 Michelle 800-315-9950 x606 MOULDERS Fukami 6 head moulder - Fukami 6 head moulder NTX-150 - Item ID11753 - Michelle 800-315-9950 x606 PALLET MACHINERY Bob Hanna Double Head Pallet Notcher - Item ID-11815 - Michelle 800-315-9950 x606 Bronco Model 2006 - Pallet nailing system with roll-out. Was used to build 48”x40”. New in 2005. One owner. still available as of 6/4/09 - Item ID-10542 - Michelle 800-3159950 x606 Bronco Pallet Machine - Model 300 with stacker can do a maximum of 54” x 54” - Item ID-10678 - Michelle 800-315-9950 x606

Hawk Bandsaw Dismantler Powered by a 3-phase, 15-hp electric motor. Has a 64” table.

Can be a one or two-man machine.

Large tires for extended blade life.

Capacity is 50-80 pallets per hour.

Manufactured by Saw Service & Supply Co. - Item ID-11065 Michelle 800-315-9950 x606 Mark I Pallet Dismantler - Mark One pallet disassembler, one-man, 62” table Mark I - Item ID-11811 Michelle 800-315-9950 x606 Pallet Chief lll nailer - Pallet Chief lll auto naller Pallet Chief 3 - Item ID-11812 - Michelle 800-315-9950 x606 Press for Applying Mending Plates - Pneumatic operated but is designed to easily switch over to hydraulics. Used in a business that specialized in non-standard sized pallets. For long stringers, used this press to join shorter stringers together with a mending or truss plate. The frame is 9’ long and has 4 quick acting pneumatic cylinders to firmly hold the pieces to be joined in place. - Item ID11068 - Michelle 800-315-9950 x606 Smart Bandsaw Dismantler - 64” table. Two-man operation. Less than 100 hours on a complete rebuild. Powered by a 15-hp 3-phase motor. Push button table height adjustment. 400-700 pallets

For Classifieds Call Your LBX REP at 1-800-315-9950

1992 Bell Super T Item ID: 11898 Contact: Michelle 800.315.9950 Ext. 606 www.LBXonline.com per 8 hour shift. Manufactured by Smart Products. - Item ID-11066 Michelle 800-315-9950 x606 Third Man Inc. Pallet Nailing Unit - Third Man Pallet Nailing Unit, Model TMN-075, S/N PJ0075, Handles Up To 48 x48, Does 3 Or 4 Stringer Pallets. - Item ID-11890 Michelle 800-315-9950 x606 Third Man Nailer with Stacker - Third Man Nailer with Stacker - Item ID-11809 - Michelle 800-3159950 x606 Williams 200 H.P. Hammermill Grinder - This 200 H.P. hammermill was recently removed from a sawmill where it was being used to grind wood waste to boiler fuel for several large industrial customers. This grinder has a very large capacity and would work well in the grinding of whole pallets because it has a top opening size of 27” X 52”. This grinder is powered by a 200 H.P. electric motor that operates at 1200 RPM and uses 460 voltage for its power. The electric motor is direct coupled

The Original Lumberman’s Exchange n 31

1996 Timbco 445B Leveling Feller Buncher Well maintained.

Quadco saw head. Good condition. Maintenance history available. Very good price. West coast machine.

Item ID: 12075 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com to the grinder through a shear coupler to prevent damage from being done to the grinder. This machine is equipped with a bar type screen that determines the size material the machine is going to produce. Of course this screen

2008 John Deere 444-J Wheel Loader Only 721 Hours; Log forks & Top Clamp.

Spare bucket. Comfort cab. Like New! MO Item ID: 12041 Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com can be changed to achieve many different size materials being produced from the same machine.

This machine comes with a size # 6 motor starter and 600 amp breaker which are enclosed in a large free standing electrical cabinet. This is a very nice clean unit and would work ideally for many grinding applications. - Item

ID-12011 - Daren 800-315-9950 x603 PLANERS American 30â&#x20AC;? single surfacer.

- American # 444 . Thickness capacity appears to be 7â&#x20AC;?. Three knife head on ball bearings.

Segmented chipbreaker and infeed rolls. (Sleeve brngs on feed rolls.) Chipbreaker bar lifts right out for ease of knife setting.

Knives measure approx. 135 thou thick. 15 HP three phase on main shaft and feed rolls belt to this.

Readily addaptable for line shaft use. Well guarded. A nice unit. Item ID-11784 - Daren 800-315-9950 x603 Complete Planer Mill - Yates American A20, 8 knife, belt driven with top and bottom profile; 54â&#x20AC;? McDonough Resaw; heaby motorized conveyor chain; XL ripper; Goff cleat machine; 2 double end trimmers; DeWalt radial arm saw. Includes all motors and dust collection systems. - Item ID-10994 - Michelle 800-315-9950 x606 Greenlee 30â&#x20AC;? double surfacer This 30â&#x20AC;? straight knife double surfacer has 4 knife heads with a 5â&#x20AC;? cutting circle. It opens to 7-1/4â&#x20AC;?. There are four top and four bottom feed rolls. There is a jointer for the top head. I was told by a planer expert that it would make a good finish planer. - Item

ID-11780 - Daren 800-315-9950 x603 Newman 4 sided planer - This 6-3/4â&#x20AC;? x 16â&#x20AC;? capacity 4 sided planer has been updated with separate motors for the feed, top head, bottom head, and both of the side heads. It has sat idle for some time but is restorable.

I overhauled the side heads and they have been stored inside. This machine differs from most 500 models in that it has 9â&#x20AC;? feed rolls rather than 8â&#x20AC;?. - Item ID-11729 Michelle 800-315-9950 x606 Newman S682 two sided planer.

6â&#x20AC;?x30â&#x20AC;? capacity. 6 knife heads - 30â&#x20AC;? Width, 6â&#x20AC;? max. & 1/4â&#x20AC;? min. thickness cap., shortest stock 46â&#x20AC;? (not butted) 20â&#x20AC;? butted; manual thickness adjustment. Equipped with: 40 HP - 3,600 RPM Direct drive motor to top head, 20 HP - 3,600 RPM direct drive motor to bottom head, both heads with NEWMAN 6-knife straight cutterheads, 7â&#x20AC;? max. cutting circle. - Sectional top chipbreaker with 3â&#x20AC;? wide hardened steel sections, 1-1/2â&#x20AC;? max. travel. 10 HP Mechanical feed drive, variable feed speed from 50 - 150 FPM, feed system with (6) 8â&#x20AC;? dia. feed rolls, (2) top infeed rolls sectional with 2â&#x20AC;? wide segments allowing 5/16â&#x20AC;? independent yield and 1-1/2â&#x20AC;? yield of the entire roll, max. cut top 1-1/2â&#x20AC;? and 1/4â&#x20AC;? bottom. - Item ID-

0 / "OX s 0RENTICE 7) s

Ă&#x153;Ă&#x153;Ă&#x153;°Â&#x201C;Ă&#x2022;Â?Ă&#x152;Â&#x2C6;Ă&#x152;iÂ&#x17D;Â&#x2C6;Â&#x2DC;V°VÂ&#x153;Â&#x201C;Ă&#x160;UĂ&#x160;Ă&#x192;>Â?iĂ&#x192;JÂ&#x201C;Ă&#x2022;Â?Ă&#x152;Â&#x2C6;Ă&#x152;iÂ&#x17D;Â&#x2C6;Â&#x2DC;V°VÂ&#x153;Â&#x201C;

Multitek Firewood Processors Increase Your Productivity and Profitability Â&#x2122; FjVa^in :fj^ebZci id GZYjXZ ndjg AVWdg 8dhih Â&#x2122; 8^gXjaVg HVl dg 7Vg 8]V^c BdYZah Â&#x2122; , BdYZah id 8]ddhZ ;gdb Â&#x2122; EgdYjXi^dc GVi^c\h je id *#* ;jaa 8dgYh EZg =djg

Made in the U.S.A.

32 n

December 2010

Visit us online at www.LBXonline.com!

AJD Forest Products

Premium Kiln Dried Hardwoods Northern Red Oak is Our Specialty Lake States Largest Producer of Industrial Lumber P.O. Box 629 â&#x20AC;˘ Grayling, MI 49738 â&#x20AC;˘ (989) 348-5412 â&#x20AC;˘ FAX: (989) 348-2500 Email: chad@ajdforestproducts.com â&#x20AC;˘ Web: www.ajdforestproducts.com

,9Ă&#x160; -Ă&#x160;UĂ&#x160;Ă&#x201C;Ă&#x160;- 7 -Ă&#x160;UĂ&#x160;Ă&#x201C;x]äää]äääĂ&#x160; Ă&#x160; 11747 - Michelle 800-315-9950 x606 18-inch - Yates American planer, 18â&#x20AC;? model J18, 2-speeds, 3-phase, new knives, +/-.005 on the cut, ready to work! - Item ID-11860 Daren 800-315-9950 x603 Yates Model 277 30â&#x20AC;?x14â&#x20AC;? double surfacer - 40 HP top. 25 HP bottom. 6 knife heads. Opens to 14â&#x20AC;? thickness. - Item ID-11779 Daren 800-315-9950 x603 Yates-American A-62 4 sided planer - This machine has 12 knife main heads with a 15â&#x20AC;? wide cut.

The side head shafts are 1-13/16â&#x20AC;?.

- Item ID-11762 - Daren 800-3159950 x603 PORTABLE SAWMILL Bolter Mill - Bolter Mill 12â&#x20AC;&#x2122; capacity 60 hp - Item ID-11736 Michelle 800-315-9950 x606 Timber Harvester HD-30 powered by a 25-hp Kohler gas engine. It is a 2005 year model with approximately 400 hours.

Runs great and comes with 2 boxes of blades - Item ID-12009 Michelle 800-315-9950 x606 Timber Harvester Sawmill 5600hrs runs and works great, cuts 30â&#x20AC;?wide and 21â&#x20AC;&#x2122;long 30hp Deutz motor fully hydraulic mill Item ID-11895 - Daren 800-315-9950 x603 RECYCLING EQUIPMENT 2002 Brush Bandit 250 12â&#x20AC;? capacity disc-style chipper with auto-feed Cat 115 horsepower engine, in 2006 engine got new assembly and doghouse, 137+/hours on new engine, 1260+/hours on frame, upper feed wheel hydraulic lift, work ready! - Item ID-11835 - Michelle 800-315-9950 x606 2003 Morbark 7600 3200 hours on a Cummins 12-cylinder engine, 1000 horsepower, ran daily, magnetic end pulley, wireless remote, 5X5, 8X8 screens, Twin Disc clutch, tight clutch, new mill rods, balanced mill, new lights, 85%-95% tires, very good value for a horizontal grinder this size!

- Item ID-11830 - Michelle 800-3159950 x606 Duratech HD12, 12â&#x20AC;&#x2122; tub grinder -

1999 Duratech HD12 great running tub grinder with brand new mill, new clutch pak, new tub ring, only 100 hours on rebuilt Cat engine 460 horsepower, swing hammers, hydraulic tilt tub, 5 sets of screens included 1â&#x20AC;?, 2â&#x20AC;?, 3â&#x20AC;?, 4â&#x20AC;?, and composting screen, magnetic head pulley, 2 extra sets of hammers, includes regular tires and foam-filled tires for yard use - Item ID-11848 - Michelle 800-3159950 x606 Gehrlinger - Powered by a perkins diesel and has power-shift transmission. Rated at 46,000 pounds and runs good. - Item ID10781 - Michelle 800-315-9950 x606 1992 Haines Bagger, single bagger, stationary, with large hopper, sealer, take-away belt, 8â&#x20AC;&#x2122; X 18â&#x20AC;?

Ruff Top elevated conveyor, originally set up for bagging sand and gravel, owner used only a short while, and then it sat. always stored indoors, single phase electric see a similar model

by Haines..click HERE Haines manufacturer still provides parts for this older unit. - Item ID-11826 Michelle 800-315-9950 x606 Powerscreen Mark II - Portable screening plant with conveyor.

- Item ID-11585 - Michelle 800-3159950 x606 Remu MSU2-300-US Trommel Screen - Powered by a Ford 5.95L, 6-cylinder tubo diesel engine, 9â&#x20AC;&#x2122;X6â&#x20AC;&#x2122; trommel screen, tandem axle, 4 conveyors, rear conveyor is a pivoting stacking conveyor.

1991 year model. - Item ID-10998 Michelle 800-315-9950 x606 ReTech 622 Screener - 1994 year model, powered by John Deere diesel. Extra screens & brushes and in great shape. 1/2â&#x20AC;? and 3/8â&#x20AC;? screens. - Item ID-10762 - Michelle 800-315-9950 x606 1990 Morbark 16 Whole Tree Chip Harvestor new Cat engine whole tree chipper with 16â&#x20AC;? diameter capcity, cab and grapple loader, grapple loader is in good condition, 1000 hours on new Cat engine, only 3500 original hours, new clutch, new belt, new

bearings, needs some paint, some dents in the cage, but overall mechanically sound whole tree chipper. - Item ID-11863 - Daren 800-315-9950 x603 1991 Haybuster IG-8 tub grinder, 1100 hrs, 2â&#x20AC;? screens, john deere diesel engine, swing hammers have been replaced, discharge belt has been recently replaced, only used to regrind bark - Item ID-11864 - Daren 800-315-9950 x603 1994 Duratech HD8 8â&#x20AC;&#x2122; tub grinder, has only 204 hours on it! John Deere turbo diesel with 131 horsepower, new under belt, new roller bearing, new hydraulic

1 Ă&#x160;*," 1 / " pump, and new exhaust. swinging hammers on mill, 2 sets of screens included (3â&#x20AC;? and 1 7/8â&#x20AC;?), 10â&#x20AC;&#x2122; discharge conveyor, good tires, 25/16â&#x20AC;? ball hitch on trailer. original ownerâ&#x20AC;&#x2122;s manual included, ready to go to work on your yard waste or pallets! Duratech CO. also owens Hay buster. The Haybuster nane tells you that it is more for farming and the Duratech name tells you that it is for heavy duty work such as gring heavy material, but they bouth fall under the DURATECH name as the company is DURTACH INC. - Item ID-11861 - Daren 800-315-9950 x603 1994 Haybuster HD-10 Tub

SAWMILL EXCHANGE North America's Largest Source Â&#x153;vĂ&#x160;1Ă&#x192;i`Ă&#x160;*Â&#x153;Ă&#x20AC;Ă&#x152;>LÂ?iĂ&#x160;->Ă&#x153;Â&#x201C;Â&#x2C6;Â?Â?Ă&#x192;° Over 800 Ads:

EdgiVWaZ HVlb^aah! 8dbbZgX^Va HVlb^aah! EVaaZi VcY 8jihidX` BVcj[VXijg^c\! ;^gZlddY BVcj[VXijg^c\!

8]^ee^c\ VcY <g^cY^c\! Ig^bbZgh! 9ZWVg`Zgh! 9gn @^ach! :Y\Zgh! GZhVlh! G^ehVlh VcY <Vc\ HVlh! AdVYZgh! BdjaYZgh VcY EaVcZgh! HVlYjhi 7adlZgh VcY 8]V^ch!

8dckZndgh$IgVch[Zgh$9ZX`h$<gZZc 8]V^c! Gdaa^c\ HidX`! and Much More!!

The Place to Sell Your Equipment 8Vaa Jh [dg V ;gZZ A^hi d[ DkZg -%% 6Yh dg id HZaa Ndjg :fj^ebZci#

800-459-2148 JH 8VcVYV

www.sawmillexchange.com E#D# 7dm )(*+, Â&#x2122; 7^gb^c\]Vb! 6A (*')("%*+,

For Classifieds Call Your LBX REP at 1-800-315-9950

The Original Lumbermanâ&#x20AC;&#x2122;s Exchange n 33

JOCKEY GRINDER OWNERS!!!

"SF XFBS QMBUFT DPTUJOH ZPV UPP NVDI NPOFZ

5IF 4FDSFU

*O 4UPDL GPS

â&#x20AC;&#x153;EZ-SLIDEâ&#x20AC;? TOOTH STOP */530%6$*/( & TOOTH REST

' BOE TUZMF TBXT # BOE TUZMF DPNJOH TPPO

5IF QBSUT UIBU UPVDI UIF UPPUI EPOÂľU NPWF

This Patented, Spring Loaded Design â&#x20AC;˘ Allows for EZ sliding of the grinding wheel to the tooth. â&#x20AC;˘ Eliminates the sticky divots of the old style wear plates. â&#x20AC;˘ Saves you time and money with better control of the sharpener and more consistent sharpening of your saw teeth.

The high quality stainless steel wear plate contacts the tooth as the aluminum frame and grinder move to sharpen the tooth.

This is one of the best innovations in our industry to come along in years. Where was this 30 years ago?

Kevin Mueller Mueller Brothers Timber Old Monroe, Missouri

Our sawyers say they will not go back to the old style parts.

Joe Nowak Lumberjack Hardwoods Menominee, Michigan

5IF &; 4-*%& IBT TBWFE NBOZ IBQQZ DVTUPNFST UJNF BOE NPOFZ

Call 1-800-582-0470 TODAY

Grinder, Powered by a John Deere Diesel Engine, Hydraulic Driven Tub and Conveyors, 10â&#x20AC;&#x2122; tub size, Hour Meter Reads: 920 Hrs, S/N: 18-1-49-0312 - Item ID-11693 Michelle 800-315-9950 x606 1994 Duratech HD8 8â&#x20AC;&#x2122; tub grinder, has only 204 hours on it! John Deere turbo diesel with 131 horsepower, new under belt, new roller bearing, new hydraulic pump, and new exhaust. swinging hammers on mill, 2 sets of screens included (3â&#x20AC;? and 1 7/8â&#x20AC;?), 10â&#x20AC;&#x2122; discharge conveyor, good tires, 25/16â&#x20AC;? ball hitch on trailer. original ownerâ&#x20AC;&#x2122;s manual included, ready to go to work on your yard waste or pallets! Duratech CO. also owens Hay buster. The Haybuster nane tells you that it is more for farming and the Duratech name tells you that it is for heavy duty work such as gring

34 n

December 2010

heavy material, but they bouth fall under the DURATECH name as the company is DURTACH INC. - Item ID-11861 - Daren 800-315-9950 x603 1994 Haybuster HD-10 Tub Grinder, Powered by a John Deere Diesel Engine, Hydraulic Driven Tub and Conveyors, 10â&#x20AC;&#x2122; tub size, Hour Meter Reads: 920 Hrs, S/N: 18-1-49-0312 - Item ID-11693 Michelle 800-315-9950 x606 1995 Diamond Z 936 Tub Grinder - Tub grinder with single axle.

Powered by a Cat diesel engine.

- Item ID-11882 - Michelle 800-3159950 x606 1995 MORBARK 1250, Fixed Hammers, Knuckle Boom, Cab, and 36â&#x20AC;? Tarantula Heavy Duty Grapple, Tripple Axle, Magnetized Pulley Conveyor, Cat 3412DITTA, 750HP Engine. 1st Hour Meter Replace:6425. 2nd Hour Meter Replaced: 634. - Item ID-11704 -

Daren 800-315-9950 x603 1995 WHO P12-56 Tub Grinder, Cat 500 hp, hyd raising tub, updated/ new hammer mill, new tub floor, clean unit ready for work. - Item ID-11818 - Daren 800-315-9950 x603 1996 Morbark 2400 Chipper, Twin Disc Clutch,New Paint and Decals,Panels in Great shape,Pintle Hitch,New Knives,12X16.5 Tires - Item ID11879 - Daren 800-315-9950 x603 1996 Vermeer TG400 Tub Grinder - Powered by a Cat 3406 400-hp diesel engine and has only 1432 hours. Has discharge conveyor.

Well maintained. - Item ID-11486 Michelle 800-315-9950 x606 1997 Morbark 1200 Tub Grinder - Hour Meter Reads 1021, 3412 Cat Diesel, Morlift 350 Grapple, Excellent machine for your grinding needs. $65000.00 - Item ID-12035 - Michelle 800-315-9950

x606 1999 CBI Model 4800 Grinder 1680 Hours: Twin Disc Clutch; Flex reversible fan, Remote control, Weight 93,000 lbs., Tires 445/65R22.5, New teeth, Updated hammers, Full engine service just completed; Cat 3412 engine w/12 cylinders; Ready to go to work; Very good condition - Item ID12047 - Tom 800-315-9950 x604 2000 Morbark 30/36 - New $30,000 upgrade done by factory including HD drum, new belts, bearings Hyd. pump. babbitt knives cat 3306 turbo engine with 335 HP new brakes, new paint and decals no leaks or drips never any trouble with engine. This 2001 is in great shape and ready to work!!

- Item ID-11804 - Michelle 800-3159950 x606 2000 Morbark 3036 Whole Tree chipper - Loader, Joystick controls

Visit us online at www.LBXonline.com!

year model, 3000 hours, magnetic head pulley, heavy duty grate liner with cutting anvil, 3412E 1000-hp Cat engine with Flexx Aire Fan. Solid steel rotor. Hammers, grate liner and discharge belt have been replaced and have less than 100 hours on them. - Item ID10577 - Michelle 800-315-9950 x606 Dura Tech HD-8 Tub Grinder Haybuster tub grinder, 8â&#x20AC;&#x2122; opening on tub, 16â&#x20AC;? x 10â&#x20AC;&#x2122; discharge conveyor, trailer mounted, 215/75R17.5 tires, John Deere diesel engine 110-hp, 705 hours.

New clutch, new hitch and new oil temperature guage. Maintenance done, changed out fuel and oil filters; changed the oil. - Item ID11803 - Michelle 800-315-9950 x606 Duratech HD8, tub grinder w/ coloring unit - Duratech HD8 Duratech / Haybuster HD8 tub grinder with coloring attachment, John Deere, 130 horsepower, 1100 hours, swing hammers, magnet on 5â&#x20AC;&#x2122; conveyor, variable speed tub with load sensor, 3 sets of screens, 3â&#x20AC;?, 2â&#x20AC;?, and 1.75â&#x20AC;?, 90â&#x20AC;&#x2122;s model - Item ID-11867 - Daren 800315-9950 x603 Duratech IG-10 Tub Grinder - Powered by a 300-hp diesel engine. Has 3000 hours.

Magnet on the discharge. New hammermill and new belts. 2â&#x20AC;? screens. - Item ID-11320 - Michelle 800-315-9950 x606 Fecon 3250 Horizontal Grinder 1995 year model, powered by a Cat 3306. Includes remote control.

Has only 1000 hours. - Item ID10798 - Michelle 800-315-9950 x606 Fecon MZA 2500 - 2004 year model with 400 hours. Cat diesel engine, 250-hp. S/N 2S000692164 - Item ID10799 - Michelle 800-315-9950 x606 Haybuster H1000 PTO Tub Grinder - Tub has been reinforced. Belts are almost new.

Mid 80â&#x20AC;&#x2122;s model. Has either 2 or 3â&#x20AC;? screen. Is 10â&#x20AC;&#x2122; wide at top of flair.

TRANSPORT DIMENSIONS Width 10 ft. 3 in. (3.12 m) Length 21 ft. 4 in. (6.50 m) Height 10 ft. 2 in. (3.10 m) - Item ID-11554 - Michelle 800315-9950 x606 Haybuster IG-8 Tub Grinder Powered by a 110-hp John Deere diesel engine. Has only 1034 hours. Includes a 1â&#x20AC;? and 1-1/2â&#x20AC;? screen. 8â&#x20AC;&#x2122; discharge conveyor.

- Item ID-11426 - Michelle 800-3159950 x606 1993 Morbark 1050 Tub Grinder, 4100 hours on a 3406 CAT diesel engine, Magnetic head pulley, wood chip coloring attachment, and self loader (grapple), 6 sets of screens (4 - 4x6 inch screens, 1 - 2 inch screen, and 1 - 1 inch screen), Extra hammers, tips, nuts and bolts, wheel base, and tons of other small parts, Spare (new) hammermill, Recently changed

1997 Bell Ultra C Feller Buncher

2004 Valmet 425 EX-10 Harvester

Koehring 18â&#x20AC;? Hot Saw; 5073 hours; 28L tires with chains; Cummins 4 cylinder with 110HP; Joystick controls. Good condition

Self leveling; 4700 hours; Long reach harvesting boom. Well maintained with service history. Valmet 360 Proc. Head. West Coast.

Item ID: 12050 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

Item ID: 12074 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

clutch, hydraulic motors and hydraulic pump, The unit can easily grind over 100 cubic yards an hour and has a variable speed control. - Item ID-11312 - Daren 800-315-9950 x603 Morbark 1200 Tub Grinder - 1993

year model; rebuilt by Morbark in 1999. Equipped with grapple, 650-hp Cat Diesel engine, rebuilt clutch, rebuilt hammermill, oversized hammermill and widerlonger conveyor. - Item ID-10773 - Michelle 800-315-9950 x606

.OW /NE 0HONE 0UTS 9OU IN 4OUCH WITH 4(% 3INGLE 3OURCE FOR ALL YOUR 3AWMILL .EEDS 8DGA:N H6LB>AA B68=>C:GN INGDC: 7:GGN 86GG>6<: 9G>K:H A:L>H 8DCIGDAH DEI>B>O6I>DC Carriage Linear & Set Shaft iĂ&#x153;Â&#x2C6;Ă&#x192;Ă&#x160; Â&#x153;Â&#x2DC;Ă&#x152;Ă&#x20AC;Â&#x153;Â?Ă&#x192;Ă&#x160;Âş Â?iVĂ&#x152;Ă&#x20AC;Â&#x153;Â&#x2DC;Â&#x2C6;VĂ&#x192;Ă&#x160;vÂ&#x153;Ă&#x20AC;Ă&#x160;Ă&#x192;>Ă&#x153;Â&#x201C;Â&#x2C6;Â?Â?Ă&#x192;Ă&#x160;LĂ&#x17E;Ă&#x160;Ă&#x192;>Ă&#x153;Â&#x201C;Â&#x2C6;Â?Â?iĂ&#x20AC;Ă&#x192;Âť /Ă&#x17E;Ă&#x20AC;Â&#x153;Â&#x2DC;iÂ&#x2021; iĂ&#x20AC;Ă&#x20AC;Ă&#x17E;Ă&#x160; >Ă&#x20AC;Ă&#x20AC;Â&#x2C6;>}iĂ&#x160; Ă&#x20AC;Â&#x2C6;Ă&#x203A;iĂ&#x192;Ă&#x160;EĂ&#x160;*>Ă&#x20AC;Ă&#x152;Ă&#x192;Ă&#x160;UĂ&#x160; i>`Ă&#x20AC;Â&#x2C6;}Ă&#x160;-Â?>LLiĂ&#x20AC;Ă&#x192;Ă&#x160; Â&#x153;}Ă&#x160;/Ă&#x2022;Ă&#x20AC;Â&#x2DC;iĂ&#x20AC;Ă&#x192;Ă&#x160;UĂ&#x160; >Â&#x2DC;`Â&#x201C;Â&#x2C6;Â?Â?Ă&#x192;Ă&#x160;EĂ&#x160; Â&#x2C6;Â&#x2DC;iL>Ă&#x20AC;Ă&#x160;,iĂ&#x192;>Ă&#x153;Ă&#x160;-Ă&#x17E;Ă&#x192;Ă&#x152;iÂ&#x201C;Ă&#x192;Ă&#x160; Â&#x153;>Ă&#x20AC;`Ă&#x160;EĂ&#x160; >Â&#x2DC;}Ă&#x160; `}iĂ&#x20AC;Ă&#x192;Ă&#x160;UĂ&#x160;/Ă&#x20AC;Â&#x2C6;Â&#x201C;Â&#x201C;iĂ&#x20AC;Ă&#x192;

The Most Complete Line of Sawmill Machinery Since 1905!

Single Machine or Complete Turn-Key Operation More Production & Profit is Only One Call Away For Parts, Service & Sales

Call (423) 698-0284 #/2,%9

For Classifieds Call Your LBX REP at 1-800-315-9950

MFG

with A/C and heat. New drum and bearings. serial# is 4661100-3036 Item ID-11363 - Daren 800-315-9950 x603 2001 Morbark 3036 - Whole tree chipper, powered by a 325-hp Cat diesel engine; has self-loading grapple; one year old heavy duty drum and runs great. - Item ID11587 - Michelle 800-315-9950 x606 2001 ROTOCHOPPER MC166, 3600 hours, Cat 3406 460 hp, includes coloring attachment - Item ID11692 - Daren 800-315-9950 x603 2003 Rotochopper CP118 Portable wood chip processor with coloring unit. This machine runs good but has an electric problem it keeps flipping the circuit breaker for the conveyor and auger Sold at this price As Is needing work to electric has extra screens, 2â&#x20AC;? screen. Will produce 35 - 40 yards per hour - Item ID11973 - Daren 800-315-9950 x603 2003 ROTOCHOPPER CP118, 80hp, 790 hours, CAT diesel engine, fixed hammers, one-pass re-grind & coloring system. - Item ID-11287 - Daren 800-315-9950 x603 2004 BANDIT 3680 Beast Horizontal Grinder - approx. 4500 hrs., working Daily - Item ID-11819 - Daren 800-315-9950 x603 2004 Bandit Beast - Powered by a V12 800-hp Cat diesel engine. 2300 hours. Photos coming soon. - Item ID-11233 - Michelle 800-315-9950 x606 2005 Rayco RC12 Chipper - John Deere engine with 500 hours, ulsating down pressure, like new condition. Machine is capble of chipping 12â&#x20AC;? wood. This machine is all but brand new. Has been kept in garage. - Item ID-11351 Daren 800-315-9950 x603 2005 Valmet 890.2 20 ton Forwarder - 10,450 hours.

Rear Bogeys recently sealed. 8 wheeled. Good condition and well maintained. Eco Tracks.

Best price available for a 20 ton Forwarder in this condition.

Ready to go to work TODAY! Motivated Seller! - Item ID-12068 Tom 800-315-9950 x604 2006 Bandit 2680 Horizontal Grinder - Only 765 hours; Cummins 400HP engine; 4â&#x20AC;&#x2122; wide fixed discharge belt, Wireless remote, Water dust supression system, 315/80R22.5 tires. This machine is very clean in excellent condition. - Item ID-12048 - Tom 800-315-9950 x604 2006 Morbark 18 chipper - 180hp Cat, 160 hours, tandem axle.

10,000lbs, curbside jack, 65â&#x20AC;?x38â&#x20AC;? feed chute, 36â&#x20AC;? drum with controlable airflow, 48 gallon lockable fuel tank, manuals and paperwork included. - Item ID11355 - Daren 800-315-9950 x603 CBI Magnum Force 4800 - 2001

WWW CORLEYMFG COM s SALES

CORLEYMFG COM

The Original Lumbermanâ&#x20AC;&#x2122;s Exchange n 35

Why? • We use only the highest quality nickel alloy steel • NEW state of the art CNC milling centers for perfect pocket geometry • 100 + years of combined hammering and manufacturing experience • Proudly made in the USA • Stock to 10 days on standard sizes • Nations largest distributor/manufacturer of saws and knives

CALL 800-862-4544 Locations in s Hampden, ME s Meridian, MS s Florence, SC s West Monroe, LA www.usblades.net 36 n

December 2010

Morbark 1200 Tub Grinder - Powered by a Cat 3412 650-hp diesel motor. Includes a Morlift 350 grapple; lots of new parts; freshly painted; air compressor; heat and A/C in the cab; magnetic head pulley. - Item ID-11660 - Michelle 800-315-9950 x606 Morbark 2400XL 20” Drum Chipper with Grapple - 2003 Morbark Model 2400XL Hurricane, 20” capacity hydraulically feed drum chipper with a Morlift 150 grapple, Cummins 260 HP turbo diesel engine, 2655 hours, hydraulic down riggers, tung jack and chute turner, dual feed rollers. - Item ID-11678 - Daren 800-3159950 x603 Morbark 2600 Portable Grinder - 2007 Year model. 321 hours.

Portable wood hog. Powered by a 250-hp Cat diesel engine. Can choose from a 3”x5” rectangular screen or a 4” octagon screen.

This machine is $220,000.00 new. Does have full warranty - Item ID-10743 - Michelle 800-315-9950 x606 Morbark 290 Wood Chipper - everything done and ready for spring , great machine for landscaper or a second back up machine for a small tree company; chipper has always started and chipped; extra sharpened blades; it has a cummins diesel engine; 88 horse power; has new tires and brakes - Item ID11897 - Daren 800-315-9950 x603 Morbark N-viro Mulch 2000 - 1994 year model. Powered by a 21-hp Kuboto Diesel. Has a 5 yard infeed hopper, mixing screw and colorant pump. 35’ auger, new motor on color pump and can process around 30 yards per hour. - Item ID-10551 - Michelle 800-315-9950 x606 Morbark Tree Shear - 20” Morbark SB52 Superbuncher tree shear. - Item ID-11468 - Michelle 800-315-9950 x606 UNIVERSAL REFINER PDR96 SUPER CONTENDER - 450 hp cummins, rebuilt engine & many wear parts replaced within 1000 hrs, machine has 6770 hrs on it. Discharge is a 20’ blower pipe. sn#PDR-96-12 - Item ID-11440 - Daren 800-315-9950 x603 Valmet 546 - 1991 year model, 955 head, 6 wheel drive. - Item ID10724 - Michelle 800-315-9950 x606 Vermeer 400L Tub Grinder - This grinder has a cab, grapple and magnetic head pulley. It is powered by a 400-hp Cat diesel engine. Unit is on a triple axle trailer and has only 2300 hours.

Also a folding discharge conveyor. - Item ID-10539 - Tom 800-3159950 x604 WHO P-12 Tub Grinder - 1989 year model with 3486 hours. - Item ID-11873 - Michelle 800-315-9950 x606 RESAWS 2001 Fastline Gator 128 Band Resaw - Resaw, Single Head, 8x8 Cap. 20HP, 220V/3Ph/60Cy, S/N: 101001-66 - Item ID-12023 Michelle 800-315-9950 x606 42” Mcdonough Band Resaw - Verticle special “V” shape infeed allows cutting 4 by 4 on a diagnal. - Item ID-10477 - Tom 800-3159950 x604 Brewco B-1600 BRAND NEW!!! - BRAND NEW!!! Brewco B-1600 has never been plugged in. Owner purchased a much larger machine - Item ID-11249 - Michelle 800-315-9950 x606 Kent Resaw - 1-1/4” bands, variable speed gear box. Extra wheels and 1/2 box of bands. 10’ return. 2001 year model.

Extended Return Belt and a Electric Band Sharpener - Item ID10897 - Michelle 800-315-9950 x606 Morgan band resaw - Morgan band resaw has automatic return belt, 220/440, 3-phase, early 90’s model - Item ID-11866 - Daren 800-315-9950 x603 Morgan Four-Head Resaw - Morgan Four Head Resaw - Item ID11810 - Michelle 800-315-9950 x606 ROLLING STOCK 1974 Peterbuilt Water Truck - Model 351; Good condition. Runs and pumps water well. - Item ID-12060 - Tom 800-315-9950 x604 1983 Mack Cruiseliner w/tail mount 1986 Hood 7000 Series loader - Mack E6-350, 800k+ miles, 9 speed Fuller trans, 20k lb.front axle w/ floats, 44k lb. rears. New in last 2 years – windshield, paint, front rims, tires, batteries, reman transmission, conversion to S-cam brake assemblies on front axle, rear brake shoes, air compressor, air dryer, rear suspension w/ trunion, buckets, bushings, truss rods and frame rail, front grille, cab jack pump, recent clutch adjustment, fluids changed and more. Rubber at 75 percent, some minor leaks. Parts truck available. Hood 7000 loader w/ 22-foot boom, butt grapple and 11k# lift capacity @ 10 feet. New in last 2

Visit us online at www.LBXonline.com!

years – main boom cylinder, left grapple cylinder, rod ends in right grapple and jib boom cylinders, all other cylinders repacked and/ or rebuilt as needed, external filter assembly, valve sections and spools, most swivels and hard/ soft lines. Some minor leaks. will take offers! - Item ID-11796 Michelle 800-315-9950 x606 SAW GRINDERS & STRETCHERS Armstrong Band grinder. - Nice #4 L.H. Armstrong Band grinder.

Serial RB 6642. Air back feed. 3 Stands. Updates. Cams: 50E 4U W, 50E 4U F - Item ID-11777 - Daren 800-315-9950 x603 SAWMILL 2005 Cooks Acu-track AC 36 Heavy Duty, Machine has 1300 hrs on it, 51 HP Perkins Diesel. Runs the band saw which has a inch and half wide band on it, 12HP Kochler Gas Motor. Powers the hydrolic controls, it comes with a De-barker/De-Mudder to save wear and tear on blades and keep them sharp, it has self log loader, and it comes with Extra Blades.

Fully maintained, Oil is changed every 150 hrs. It will cut aprox on average 3,000 board foot a day. Item ID-11902 - Daren 800-315-9950 x603 2007 Cooks Portable Sawmill with portable edger - 2007 AC-36 Cooks Portable Sawmill with portable edger, 301 hours, tires are in good condition and ready to work.

51-hp diesel, setworks, mudsaw, sharpener. Edger is a Cooks 14” - Item ID-12016 - Michelle 800-3159950 x606 72” CSI R72 Circle Saw - Year model 2004, hydraulic. 20’ deck.

Sold without the blade. New blade is additional $3500.00. Was over $40,000 new, 2 years ago. machine needs a new blade, 1500 hrs, it was used to cut logs - Item ID10767 - Michelle 800-315-9950 x606 Armstrong #4 - Bandsaw Sharperner - complete sharpener for left hand blades from 6” to 14” wide. Comes with a complete full set of saw stands, back feed arm, and filing clamp. Features “Sidewinder” spring loaded feed finger, carbide face plate, plastic cams, and Allen Bradley frequency drive for variable speed on the grinding wheel. Will grind 4” or narrower bands with slight modification. - Item ID-11618 Michelle 800-315-9950 x606 Baker 3630E Band Sawmill - 2001 year model. 20’ Stationary unit powered by a 30-hp electric motor, 7.5-hp hydraulic unit.

Includes electric set works and the control & hook-up for a log deck. Has been completely shop checked. Can take up to a 36” diameter log. - Item ID-10566 Michelle 800-315-9950 x606

Corley Sawmill ***SOLD*** Model 385 Sawmill mounted on trailer frame - Item ID-10676 Michelle 800-315-9950 x606 Frick Slab dump - Overall footprint: 58” x 18’-3”. Plan view sketch available. This is a heavy duty well built unit. - Item ID11786 - Daren 800-315-9950 x603 KM-16 Trimsaw - Trimsaw - Item ID-11670 - Michelle 800-315-9950 x606 Log Decks - The bright colored long deck is a 30’ 2 strand with stop and loader and hydraulic drive. Strand spacing is 48”. Deck is based on 5x10 tube frame.

Underneath is a 14’ 2 strand deck with 80” strand spacing. There is a gear box but no motor. Could be hydraulic or electric. can be solld separt MAKE OFFER! - Item ID11731 - Michelle 800-315-9950 x606 Lumber Transfer - Lumber transfer 16 ft 4 strand 50 ft 4 strand Green Chain - Item ID-11669 - Michelle 800-315-9950 x606 Meadows Portable Mill - 56” sawblade, setworks, new wheels on carriage, includes 4 extra blades (2 need work). Very good condition. $6,000 worth of work to setworks and carriage. Pulley system. - Item ID-10895 - Michelle 800-315-9950 x606 SB-420 Milling Machine for Round Log Home Timbers - This is a new machine. Technical data: width 8.25”; height of head machine 78.75”; height of line 17.75”; width of the line 57.75”; total width 82.5”; total height 92.5”; length of line 68.75’; maximum diameter of the timber 16.5”; maximum diameter of the log 23.6”; minimum diameter of the timber 3.9”; maximum legnth of timber 29.5’; minimum legnth of timber 4.9’; milling cutter motor 2x13kw/2800 turn/min (17hp

.05*7"5&% 4&--&3

2008 Valmet 603 3-Wheeled Feller Buncher w/ 18” Bunching Saw Head

3700 hours; Cummins 4BT with 130HP uses 4.5 gallons/hour. Zero turn radius. 28” Tires.

ROPS Cab with A/C and stereo. Very good condition. Great value.

LA Item ID: 12053 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com each); drive motor 0.75kw/1400 turn/minimum (1 hp); boring motor 2x 0.75kw/2800turn/ minimum (1hp each); carriage motor 0.75kw/1400 turn/minimum (1hp); belt transporter motor 0.37kw/1400 turn/minimum (0.5hp); hydraulic pump motor 4kw/1400 turn/minimum (5hp); total power 33 kw (44hp); speed of the movement 0-25 m/min (0-82 ft/min); speed of the rotating the timber 0-300 turn/min; 2 hydraulic lift for the timber; hydraulic clamping of the logs. This unit is

For Classifieds Call Your LBX REP at 1-800-315-9950

2005 Valmet 890.2 20-Ton Forwarder 10,450 hours. Rear Bogeys recently sealed.

8-wheeled. Good condition and well maintained. Eco Tracks.

Best price available for a 20 ton Forwarder in this condition. Ready to go to work TODAY! Item ID: 12068 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com produced in Slovenia and price does not include shipping. - Item ID-11658 - Daren 800-315-9950 x603 SHAVING EQUIPMENT 2006 SALSCO 30 Shaving Mill 2006 SALSCO 30, Hour meter is not working properly, 83 hp cat, Box is 102”x 30”, has a blower and all knives in blower are in good shape - Item ID-11977 - Daren 800315-9950 x603 2007 SALSCO 30 Shaving Mill with Blower, 1686 hours, 83 hp Cat Engine, Box is 120”x 30” - Item ID11978 - Daren 800-315-9950 x603

The Original Lumberman’s Exchange n 37

LEApril2009:Lumberman's Exchange 3/18/09 2:16 PM Page 1

# (

) % ) % )

*+ , + # $

# % $ - . / 0 1

2* $ % % $ / ' $ ( ' 3 1

! "

#$ % & ' $ $

51( $

. /

0 & & 1 $ ( 3 3

/ $4

$ % ( 1

6 $ ($

7%

0 $ $ $ 1

- $3 $ $(

! " # $" % & '( 38 n

December 2010

Shaving Mill - Shop built, set up 1 year ago. Box is 48â&#x20AC;?W x 5-1/2â&#x20AC;&#x2122;L. All electric, powered a 3-phase electric motor with converter. Comes with all electrical boxes. 2 heads with 3 knives per head.

Powered by a 60-hp motor. Includes deck to feed and discharge conveyor. Processes 2 truck loads per hour. Runs about $150.00 per month in electric use. - Item ID-11975 - Michelle 800-3159950 x606 4!",% 3!73 2)0 3!73 42)- 3!73 #54 /&& 3!73 Dawson 2-Saw Air Trim Saw - Trimmer cuts cants with operator sliding material left or right on rollers. It has manual stops, saws are foot operated. Includes a waste belt conveyor below. Item ID-10712 - Michelle 800-315-9950 x606 Diehl air operated crosscut saw. Suitable for behind a roller line. Has an 18â&#x20AC;? saw. - Item ID11740 - Michelle 800-315-9950 x606 Mereen-Johnson 431-DC Gang Rip Saw with Laser - Model 431-DC, S/N MJ-4728, 31 Capacity, Comes With Mereen-Johnson Laser Set-Up Stand, S/N LZ-31-8-F, Model MJ-7121 With Operations Manual - Item ID-11995 - Michelle 800-315-9950 x606 Mereen-Johnson Gang Rip Saw, Model 431-DC, S/N: MJ-4728, 31IN Capacity, Comes with MereenJohnson Laser Set-Up - Item ID-12019 - Michelle 800-315-9950 x606 Newman Drop Saw Trimmer - Has 7 adjustable saws. Has built in scrap conveyor. Includes all motor and starters. - Item ID-10714 - Michelle 800315-9950 x606 Slab Saw - New Slab Saw by Precision Mills. 1 blade. - Item ID-11643 - Michelle 800-315-9950 x606 TRANSFER DECKS 3 Channel Live Deck - About 25â&#x20AC;&#x2122; long - Item ID10896 - Michelle 800-315-9950 x606 TRIMMERS Dawson Brothers Double End Trimmer - Comes with gas and electric motors. 30â&#x20AC;&#x2122; waste conveyor; air hoses and regulators included. - Item ID-10748 Michelle 800-315-9950 x606 6%()#,%3 425#+ 42!),%2 6!.

1985 Wilson 20ton Tilt Deck Trailer - Wisconsin Tilt Deck Equipment Trailer, excellent deck, 90% tires, air brakes, - Item ID-11591 - Daren 800-3159950 x603 1988 Mack RW713 Day Cab Log Truck - Mack E6350, 350 HP, 15 Speed Eaton Fuller Transmission, Spring Ride, GVWR: 52,000, Odometer Reads: 612,933, VIN: 1M2AY10Y0JM003060 - Item ID-12000 - Michelle 800-315-9950 x606 1989 International Truck with Barko Loader Model F-2574. 228â&#x20AC;? wheelbase, 312,000 miles, 100,000 on new Cummins 400 diesel engine; tires are 70%; truck has fresh paint. No leaks, clean and dry 1998 Barko Loader. - Item ID-11655 - Michelle 800-315-9950 x606 1989 Kenworth T800 Log Truck w/Log Trailer Cat 3406B Diesel Engine, Fuller RT0187 18-Speed Transmission, 425 Horsepower, 80,000 GVW, 230 Wheelbase, Odometer Reads: 946,784, VIN: 1XKDDB9X6KS536125, with 1984 White Log Trailer, 26â&#x20AC;&#x2122; Length, VIN: SA100WHITLOG84529 Item ID-12001 - Michelle 800-315-9950 x606 1996 Clement End Dump Trailer, 24FT X 96IN Tandem Axle, Spring Suspension, Air Brakes, Steel Wheels, GVW 77120, - Item ID-11997 - Michelle 800315-9950 x606 1996 Freightliner w/Prentice 120C Knuckleboom - Knuckleboom mounted behind the cab, Cat 10 speed - Item ID-11593 - Michelle 800-315-9950 x606 1996 Peterbilt Model 377 - 1996 peterbilt tamdan, 22 foot silage bed with end dump and hyd. gate,roll over tarp, would make a very good grain

Visit us online at www.LBXonline.com!

HEAVY DUTY FORKS AT BIG SAVINGS &"&$'š i]^X` m &%š l^YZ m )-š adc\ # # # # # # # # # # # # # # # # # # # # # # # # '!)%%#%% eV^g 'š i]^X` m +š l^YZ m )-š adc\ # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # -&%#%% eV^g '"&$'š i]^X` m +š l^YZ m )-š adc\ Hjgeajh # # # # # # # # # # # # # # # # # # &!&%%#%% eV^g '"&$'š i]^X` m +š l^YZ m )-š adc\ # # # # # # # # # # # # # # # # # # # # # # # # # # &!&,%#%% eV^g '"&$'š i]^X` m +š l^YZ m +%š adc\ # # # # # # # # # # # # # # # # # # # # # # # # # # &!('*#%% eV^g '"($)š i]^X` m +š l^YZ m ,'š adc\ # # # # # # # # # # # # # # # # # # # # # # # # '!)'*#%% eV^g (š i]^X` m ,š l^YZ m +%š adc\ # # # # # # # # # # # # # # # # # # # # # # # # '!)'%#%% eV^g (š i]^X` m ,š l^YZ m ,'š adc\# # # # # # # # # # # # # # # # # # # # # '!,)%#%% eV^g (š i]^X` m ,š l^YZ m .+š adc\ # # # # # # # # # # # # # # # # # (!)(%#%% eV^g â&#x2013; IN STOCK â&#x2013; SAME DAY SHIPMENT â&#x2013; LET US QUOTE YOUR

SPECIAL DESIGN FORKS. VERY COMPETITIVE PRICING.

Above forks have capacities from 12,000 lbs. to 30,000 lbs. per pair. ("&$'š i]^X` m -š l^YZ m +%š adc\ # # # # # # # # (!).%#%% eV^g ("&$'š i]^X` m -š l^YZ m ,'š adc\ # # # # # # # # (!-,%#%% eV^g ("&$'š i]^X` m -š l^YZ m .+š adc\ # # # # # # # # )!--%#%% eV^g Also, 4â&#x20AC;?, 5â&#x20AC;?, 6â&#x20AC;? thick forks to 168â&#x20AC;? long.

-ADE FROM ONE PIECE OF STEEL NOT WELDED 1UALITY RECOGNIZED WORLD WIDE

BAY EQUIPMENT CO. / (616) 392-1811 0 / "/8 (/,,!.$ -)#( s &!8

2008 Dynamic 585 Whole Tree Chipper 2200 hours on JD 500HP engine; Zero hours on new factory upgrades - New Drum, New Discharge Chute, New larger bearings, New bottom access panels, New Feed Rollers.

Factory rebuilt with limited warranty. Price reduced. TX Item ID: 12059 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

iÂ&#x201C;>Â&#x2C6;Â?\Ă&#x160;L>Ă&#x17E;°i¾°VÂ&#x153;J}Â&#x201C;>Â&#x2C6;Â?°VÂ&#x153;Â&#x201C;Ă&#x160;UĂ&#x160;Ă&#x153;Ă&#x153;Ă&#x153;°L>Ă&#x17E;iÂľĂ&#x2022;Â&#x2C6;ÂŤÂ&#x201C;iÂ&#x2DC;Ă&#x152;VÂ&#x153;°VÂ&#x153;Â&#x201C; truck. 9 speed trans. 80% rubber, 475 cat engine, good truck ready to go to work. just put new shocks on front. bed sides are 60â&#x20AC;?. - Item ID-11597 - Michelle 800-315-9950 x606 1997 Mack CH613 w/1997 Sta-Lite Log Loader Trailer - E7 Mack Engine 454-hp; 354,000 miles; 18-speed transmission; 12,000# front axles; 40,000# rear axles; Suspension Air Ride; 80% air brakes, PS, AC, airslide 5th, cruise control, hyd wet kit for log loader, alum headache rack, dual exhaust, includes 1997 Sta-Lite 45 ft x 96â&#x20AC;? log loader trailer - Item ID11588 - Daren 800-315-9950 x603 1998 Cargo Walking Floor Trailer, 45FT x 102IN - Tandem Axle, GVW: 68,000, Air Ride Suspension, Air Brakes, Aluminum Wheels, VIN: 1C9WX4526WC450129 - Item ID11998 - Michelle 800-315-9950 x606 1998 MACK CL713 - 1998 Mack w/ a 1998 Serco Loader, 25â&#x20AC;&#x2122; Boom, 1/4 Butt Grapple, Pintle Hitch, Tractor Package, Power Divider, Heated Mirrors, AC, Cruise Control. Front axle 20,000, Rears 44,000, Camelback suspension, 135,155 miles, 460 hp, 18 Spd transmission. - Item ID-11529 Daren 800-315-9950 x603 1999 MACK CL713 - 1999 Mack CL 700 Log/Loader Truck w/Tri axle Rosa Pup E-7 Mack @ 460 hp. , 8LL trans., cruise, Serco 8000 Loader,

dual stack, tool box, alumin fuel tank, just had $11,000 in motor, $4,000 in trans and $6,000 in front/ rear tandems 1999 Rosa Crib Trailer 3 axle, a/ride, 22â&#x20AC;&#x2122; deck, 22.5 tires, aluminum wheels, hub piloted - Item ID-11530 - Daren 800315-9950 x603 2002 Kenworth T800 Log Truck and Trailer - Cummins ISX, 475 HP, 18 Speed Eaton Fuller Transmission, Lift Axle, Odometer Reads: 522,028, VIN: 1NKDX4EX52S894416 with 2002 Whit-Log NBSE100 Log Trailer, GVWR: 34,000, VIN: 1W90111052SW02033 - Item ID11999 - Michelle 800-315-9950 x606 2002 MACK GRANITE CV713 2002 MACK GRANITE CV713, 464hp, 664,500 miles, 18 spd, air ride suspension, 2002 SERCO 7500 LOADER AND 1996 ROSA PUP TIRES AND BRAKES at 80% - Item ID-11700 - Daren 800-315-9950 x603 2003 Mack CH613 - With E7 425 Mack engine, 9 speed, wet kit, air slide fifth wheel, air ride suspension, air conditioning.

210,000 miles. Good tires. - Item ID-11087 - Michelle 800-315-9950 x606 2003 Volvo Model 660 - This truck has been converted to a Toter Truck for pulling a 38 ft fifth wheel, has a 475 hp isx cummins deisel with 10 speed automatic trans. bunk bed and referigator,air

ride fifth wheel, and much. much. more. - Item ID-11596 - Michelle 800-315-9950 x606 25â&#x20AC;&#x2122; Deck trailer with dove tail - 25â&#x20AC;&#x2122; deck trailer with dove tail. Photos coming soon. Is a 2007. - Item ID11676 - Michelle 800-315-9950 x606 Great Lake Log Jammer - 1983 year. LOG JAMMER IS A PRENTICE S/N# 90P22414 MODEL# F90, STICK ON JAMMER 20â&#x20AC;&#x2122; - Item ID11592 - Daren 800-315-9950 x603 Hobbs End Dump - 1975 year model. 26 feet long, 5.5 foot high sides. Cylinder weeps and tires are not good. - Item ID-11085 Michelle 800-315-9950 x606 Johnson Short Wood Pup Trailer 2 short wood pup trailers; tire size 11R 22.5; good condition; price is $6,000.00 each. - Item ID-11657 Daren 800-315-9950 x603 Kent Pole Trailer - 1990 year model. - Item ID-11855 - Michelle 800-315-9950 x606 Kenworth W900B Logging Truck - 2000 year model truck powered by a Cat 3406E, 550-hp.

18 speed, 460,000 miles, 430 ratio, Henrickson HN suspension, dual exhaust, dual air cleaners. Truck drives great. Also has a 2004 Serco 8500 Log Loader with cooler and extenda boom mounted behind the cab. 22â&#x20AC;&#x2122; log body. - Item ID11478 - Michelle 800-315-9950 x606 Nabors Pole Trailer - 1987 year model. Truck not included with

For Classifieds Call Your LBX REP at 1-800-315-9950

2004 John Deere 548-GIII S/A Grapple Skidder 3812 hours; Great Condition. Limited use and well maintained.

This machine is clean and dry. MO. Item ID: 12040 Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com trailer. Call with questions. - Item ID-11854 - Michelle 800-315-9950 x606 Pup Trailer - 3 axle load hog pup trailer. Rebuilt in 2005. - Item ID11416 - Michelle 800-315-9950 x606 Wisconsin Tiltbed Trailer - 1973 year model. Two axle, fifth wheel pull, ex-forest service. Has good tires. - Item ID-11084 - Michelle 800-315-9950 x606

The Original Lumbermanâ&#x20AC;&#x2122;s Exchange n 39

“Perfect In One Pass” .

THE LUMBERMAN’S EXCHANGE Post Office Box 1916 Columbia, Tennessee 38402

PRSRT STD. U.S. Postage PAID Permit No. 212 Pulaski, TN

Electric Electric

Diesel Diesel

Grinding Ag Biomass Grinding Ag Biomass

Grinding Forestry Biomass Grinding Forestry Biomass

Why Is Rotochopper So Special???

Why Is Rotochopper So Special???

Why is it so hard to find a used Rotochopper?

Why is it so hard to find a used Rotochopper?

Why are our customers so loyal?

Why are our customers so loyal?

Intelligent Design Intelligent Design

Technologically advanced grinders that make precisely the right Technologically advanced grinders that make precisely the right particle size for biomass fuel, landscape mulch, animal bedding, particle size for biomass fuel, landscape mulch, animal bedding, wood flour, wood pellets, gasification, cellulosic ethanol, etc. wood flour, wood pellets, gasification, cellulosic ethanol, etc.

Thrifty, energy efficient grinders built for the 21st century and Thrifty, energy efficient grinders built for the 21st century and backed up with . . . backed up with . . .

World class factory service and support.

World class factory service and support.

217 West Street 217 West Street St. Martin, MN 56376 St. Martin, MN 56376 608­452­3651 608­452­3651 320­548­3586 320­548­3586 http://www.rotochopper.com http://www.rotochopper.com info@rotochopper.com info@rotochopper.com

Give us a call and let a Rotochopper save YOUR world by grinding YOUR products . . . .

Give us a call and let a Rotochopper save YOUR world by grinding YOUR products . . . .

“PerfectInInOne OnePass” Pass”. .

“Perfect