Lumbermens December 2023 Magazine

F R E E

E Q U I P M E N T

L I S T I N G S

-

P G

6

DECEMBER 2023 TM

pg.26>>

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

BEAT BANDSAW WORK EVERY TIME WITH THE ULTIMATE PORTABLE ‘93 Barko 180B

“Precision Under Pressure”

‘16 Halverson H140 Skidsteer (DEMO)

BLADES LAST FOR YEARS

Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

REDUCES HANDLING LUMBER SIMPLE TO LEARN & OPERATE

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

TAKES ON ANY DIAMETER LOG CUTS LOGS INTO LUMBER FASTER CUTS STRAIGHT LUMBER RELIABLY

‘95 John Deere C6 Tree Farmer

FAST, SAFE, EFFICIENT & ACCURATE PRODUCES VALUABLE BY-PRODUCT CHIPS

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

capacity!. Item ID 13421. Sam x702

BARKO

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

but electronic option is available.

50% or better. 475 hp Cummins

Value! PA. Item ID 12062. Sam x702

MILLING MADE EASY

in excellent condition. Runs great.

Firewood Processor - This is a

Turbosawmill make the world’s premier automated sawmill, Item ID 13644. Sam x702 homemade processor with a 10’ available right across the US.

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

log deck. Has a hydraulic grapple, chain and kicker that all runs off

We utilize proven swing-blade technology to help every of a 4 cylinder Mercedes power customer save time and money, and to always get the best inch insert tooth circle saw, 30 foot unit. Has a 4’ chain saw that kicks cut lumber.

- It has a 353 Detroit diesel, 40

 Issue 364 430

Lumbermens™  since 1986

❘

motor, Rotobec continuous

grapple, 5,000 original hours.

13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners as a backup as needed. Has a CTR

1999 Bandit 1900 Tracked Disc

adjustable to single two way. Great

knuckleboom, 30' boom, 75hp

have only used it to load trucks or

Chipper - Cat Under Carriage at

Has Log Lift. Uses 4-way wedge Diesel. 7500 Hours.

One owner.

MANUAL MILLS AUTOMATED MILLS

day. Item ID 13882. Austin x703

1994 Barko 160B - Electric

(excellent condition.). Item ID

a Chomper Model 16 PDA

Handles logs up to 32”. Uses

13HP Honda motor. Manual start

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

SLABBERS

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

US Dealer – Smith Sawmill Service

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny www.turbosawmill.com

1-800-598-6344 a brand new Duetz engine. Lever

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 3

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

Grapple Assist for crooked logs

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

2019 Cord King Line-up

Email: info@cordking.ca Web: www.cordking.ca ‘13 KMC 2500 Track Skidder

‘95 John Deere C6 Tree Farmer Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

TOLL FREE 1-888-219-WOOD (9663) Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’

a Chomper Model 16 PDA

automatice firewood processor

Item ID: JW-986495 withsplitter John Deere power unit with • Wedge and Contact: J Williams design tolow hours.

Control panel includes suit your Ph: (888) 401-6367 x701

needs tach, oil pressure, water temp and • 24 to 72 ton splitting amp gauges.

Cuts logs up to 16”. capability One owner and comes with all chain conveyer, 8 way splitter, on • trailer.

The splitting 20,000lb goose neck Itemfastest ID manuals and receipts. Purchased cycle time on the 13916. Austin x703 new for $32,500. Item ID 13865. planet. Sam x702 Best Value Portable Log Splitter

Facts to consider:

- Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

1. Pioneered N. America’s first commercialChipper firewood processor in the mid 70’s 13HP Honda motor. Manual start - Cat Under Carriage at Boom cylinders have minor leaks.

drum design. Can easily load 42’

vans and produce 6 - 8 saw loads per but electronic option is available.M2030 50% orand better.M2430 475 hp Cummins 2. 3 Bar models available M1820, day. Item ID 13882. Austin x703

Has Log Lift. Uses 4-way wedge

Diesel. 7500 Hours. One owner.

Brewco Saws - Two Brewco Saws

Value! PA. Item ID 12062. Sam x702

Sam x702

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

3. 7 Slasher Available Model 44, 44HO, 48, 54 & 60low at hours at 3,500. 5.9 EDGERS & GANGS Saw Models adjustable to single two way.

Great 36, Well 40, maintained.

Item ID 13294. with

CUMMINS continuous grapple.

4. The Most productive machine on the planet, proven and guaranteed Firewood Processor - This is a 2004 Bandit Beast Model 4680 Runs Great!. Item ID 13740. Sam

in excellent condition. Runs great.

Item ID 13644. Sam x702

homemade processor with a 10’ 3412 Caterpillar Diesel engine x702 5. Go to our web site for live action video and details www.cordking.ca FIREWOOD PROCESSORS log deck. Has a hydraulic grapple, with 850 HP. 5300 hrs. Mill in BELL 2010 Shop 6.

Built Wood Processor chain andjoystick kicker that all runs off good condition. Just finished 10 1990 Bell Super T - This Bell has Available with single control - It has a 353 Detroit diesel, 40

of a 4 cylinder Mercedes power

Acre clearing job, ready to work!

a brand new Duetz engine. Lever

7. Exclusive lifetime splitter warranty and Remote 1 year bumper to bumper warranty. control. Big production control, 33” bar, pump and tranny unit. Has a 4’ chain saw that kicks

inch insert tooth circle saw, 30 foot  Issue 364 430

Lumbermens™  since 1986

❘

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

PleAse PrINt

Pulleys on Bearing . Parts Book and

belted rollcase to clear slabs and

12846. Sam x702

short pop-up transfer to edger,

where to order included. Item ID

cuts from sawline, log stop and

Zip

❑ Please Remove

loader to drop logs onto carriage,

Precision 58 Chip Pac - Single chute

stop and loader to deal with big

Sam x702

loading system,. Item ID 12764.

heavy duty log turner under log

EST

Trelan Chipper - This is a remote

logs onto carriage and track and

Email

State

www.starwebhosting.net/woodsmen/ frame. Significant new spare parts

chipper that has been totally rebuilt with about 840 hours except for the

to be negotiated separately. Item ID

BANDMILLS & HEADSAWS DealS Month SOUTHWEST FOREST PRODUCTS EXPO Danckaert Band Resaw - Roughly Fri, 25 August Sat, 26 August From ApriL TA B L E O F C O N T E N T S of the

V-12 Caterpillar power unit. New

13198. Sam x702

clutches, disc, bearing, liners and

Manual Four Head Block - Manual

custom chute. 23” in opening and

Four Head Block Mounted on

The Tree that Started it All!

all steel carriage. Husk. Manual Hot Springs, Arkansas www.arkloggers.com

'12 WoodmIzer LT 40

City

❑ Please Change

FOR CLASSIFIEDS Call 888.401.MENS TM CHIPPERS See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at L I S T New S York ELL EXCHANGE BUY SAVE 1986 Boonville, www.LumberMB\ISmagazine.com blades and 1 spare 36" blade),

V-12 Cat with 750-800 hp rating.

10 hours on this machine since it

has been rebuilt, it has a 24foot in

REpREsEntativEs EST 1986 feed deck 20 foot out feed deck D E P A R T M E N T S 72ND ANNUALEquipmEnt GREAT LAKES with 44 inch wheels, and all the Since 1986, Lumbermens has LOGGING & HEAVY EQUIPMENT EXPO published a Equipment monthly circular Thurs, 7 Sept Sat, 9 Sept Free Listings ............

6 bells and whistles, its a production fREE EquipmEnt listings!

Call – reaching sawmills, loggers, Escanaba, Michigan(888) 401-6367 machine, with air strain conveyers pallet makers, recyclers and Safety Alert ................................

23 that go up and down, with airbags, industrial woodworking plants MID-ATLANTIC LOGGING & BIOMASS worldwide.

Morris it includes two sets of Mcdonough Chris 15 Sept - Sat, 16 Sept Funny Time ................................

E S T 24 Fri, 1986 PUBLISHER AD Sales pressure guides. Top Casting wheel 2012 JoHn deere Selma, North Carolina (888) 401-6367 Woods Publishing 548G3 (888) 401-6367 www.midatlantic-logging-biomass­ is supported on both sides. This Industry News............................ 24 Ext. 700 ADVERTISING SALES expo.com/ Ext. 704 is an extremely accurate machine Morris Woods chris@lumbermensco.com morris@lumbermensco.com in ve1y good condition, Cuts 130 Deals of the Month .................... 26 KENTUCKY (888) 401-6367 ext. 704 WOOD EXPO morris@lumbermens.co feet a minute also has CLT presses.

Fri, 15 Sept - Sat, 16 Sept Ad Directory MARKETING DIRECTOR.............................. 38 Item ID 13876. Austin x703 Lexington, Kentucky cAll uS todAy foR All youR uSed equiPMent needS!

LIST

SELL

EXCHANGE

item id: 14061 contact: Austin x703

BUY

SELL

EXCHANGE

BUY

SAVE

SAVE

Phone

Address

Individual Name

Company Name*

❑ Please add

LIST

*Company name and address required to process your change.

If you need to Change your Address or Add Your Name to our mailing list, then please complete this form and mail to:

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Lumbermens Magazine

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Reduced PRice item id:14021 contact: Sam x702

FAbTeK 344b

P.O. Box 1916 Columbia, TN 38402

Donna Heninger

✁

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

item id: 14061 contact: J Williams x701

For classifieds Call toDay (888) 401-6367

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Austin S & W 125 Band Mill with

(888) 401-6367 Caterpillar generator - Low hours

❘

Walker

(888) 401-6367 Ext. 707 ❘

walker@lumbermensco.com

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Bell's Machining ..................... 27 Brute Force Mfg. ..................... 31

Buck Equipment (AIM) ........ 36 Send address changes to: SUBSCRIPTION: Lumbermens™, a trade newspaper for the logging, Lumberman's Exchange Mfgwood .............................. sawmilling, manufacturing, andCorley secondary manufacturing32 P.O.pallet Box 1916 industry, is freeTN within the United States to qualifying manufacturers Columbia, 38402 CRD Metalworks ....................

25 and industry suppliers. Please limit your subscription to one free copy per company orExchange mill locatiison.

The Lumberman's CW Mill-ArmorHog .............. 17

published monthly

by Woods Send address changes to Lumbermens™ CHANGE OF ADDRESS: CW Mill-Hogzilla ................... 15 Publishing, Box 1916, Magazine,P.O. 1116 W. 7th St., Ste. 297, Columbia, TN 38401. When Columbia, TN 38402. All rights possible, please include an old addressDyna label. Products ........................ 35 reserved. All editorial/ advertorial REPRODUCTION AND Adverti sers are................... responsible 8 submissions are used at the RESPONSIBILITY: Empire Hydraulics discretion of the publisher and may for the contents and claims of their advertising. Lumbermens™ accepts beno edited for purposes of their clarityclaims. No Great Lakes Mfg. .................... responsibility for part of this publicati on may be34 and space. Although all efforts reproduced or transmitt edhave in any form or by any means, electronic Hahn Machinery ...................... been to ensure accuracy photocopying, of or made mechanical, including recording or any information 3 content submitted by advertisers storage retrieval system, without Hurst permission of Lumbermens™.14 Boiler ............................. and writers, the Lumberman's Negatives, artwork, and other items submitted for publication in Exchange, its principles and IronserQs. Bull ...................................

Lumbermens™ are the property of adverti Lumbermens ™ owns21 associates, are not held liable for material typeset and/or designed by Lumbermens ™ and reserves the errors or omissions. Reproduction, Kilgore Saw ............................. 22 use outside ofwith­ Lumbermens™. Lumbermens™ will exercise in right wholeto orits part, is prohibited precauti on in writing, designing,Lignomat and printi................................. ng material contained 24 outevery written consent. within. We shallWoods not bePublishing liable for omissions or typographical errors. ©2017

- USED FORESTRY EQUIPMENT FOR SALE

❘

works,1 1/2" or 2" band, 22ft. track austin@lumbermensco.com Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434.

Austin Woods Phone: (888) 401-6367 ext. 703 austin@lumbermens.co

 liSt  Sell  exchange  buY  Save

Baker ...................................... 5, 7

on the703 mill, electronic computer Set Ext.

Cambridge, Ohio www.ohioforest.org

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703  austin@lumbermens.co Issue 364 lumbermenS  Since 1986

MAILING ADDRESS

http://www.kfia.org/ Sam KentuckyWoodExpo.aspx (888) 401-6367

Morris Woods, Ad Sales Phone: (888) 401-6367 ext. 704 morris@lumbermens.co

Ext. 702 THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct sam@lumbermensco.com

DESIGN DIRECTOR EQUIPMENT REPS

chris Woods Phone: (888) 401-6367 ext. 700 chris@lumbermens.co

Sam x702 Joe

Sam Wall Phone: (888) 401-6367 ext. 702 sam@lumbermens.co

CARRIAGES & DRIVES

(888) 401-6367 2010 Cardinal HD Carriage Ext. 709 Carriages lumbermenSmagazine.com (Sawmill) - Cardinal joe@lumbermensco.com

Carriage line it includes carriage

with onboard log turners, carriage

drive, hyd pac for carriage, Julie Menominee Saw .....................

29 sawyers cab, computer controls, 401-6367 cabinet with electronic drives for Metal Detector's Inc(888) . ..............

30

Ext. 701 Midwest Sharpening.............. 26

carriage knees, husk including

julie@lumbermensco.com 48" bottom saw and 36" top saw

Morbark ..................................... 9

STACKING The Tree that RACit All! Started

Multitek ................................... 12

Piper's Saw Shop.................... 13

Rotochopper............................ 40

Row Electric ............................ 20

Sawmill Exchange .................. 11 Since 1986, Lumbermens™ has pub lished a month ly circular Select Sawmill ......................... 19 reaching sawmills, loggers, pallet makers, recyclers and industrial woodSawmill working........................... plants worldwide.

Smith 4 PUBLISHER The Paul Bunyan Show ......... 39

AD SUBMISSIONS May be sent to— morris@lumbermensco.com

Woods Publishing

Thomas Industrial Controls..... 10 DESIGN DIRECTOR

Union Grove Saw & Knife.. 2, 37 Ted Monnin Universal Refiner ................... 23

MAILING ADDRESS 1116 W. 7th St., Ste. 297 • Columbia, TN 38401 WoodMizer ................................ l (888) 401-6367

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

POSTMASTER Send address changes to: Lumbermens™ Magazine 1116 www.BakerProducts.net W. 7th St., Ste. 297 • Columbia, TN 38401

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 5

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO)

set of bear claw chains. This Skidder has been a dependable machine, and is currently in the woods working daily.

Item ID 5249. Austin x703

LOGGING

INTERNATIONAL CABLE SKIDDER It’ll come with brand new tire chains on it, Everything still works as it should, Gears JOHN DEERE 440C shift smooth, engine has no blow-by’s, No leaks, been well John Deere 440C for sale, maintained, Starts right up and Skidder has a brand new motor goes to work, He’s an old man, in it, along with new clutch, new but could have videos available pressure plate, and new radiator, for those that can’t go look at and rebuilt steering box. Winch it. One owner only, and he’s was recently rebuilt as well. retiring. A few of the good Skidder is tight and dry, and will come with a full set of ice chains. ones left Victory out there, 13428 Ln. //Delivery PO Box 124 available as well.

Buyer pays Call/email for more information.

Adams Center, NY 13606 Item ID 5242. Austin x703 for trucking, About 200mi east of Cincinnati OH 90′ TIMBERJACK 240A Item ID 5568. Joe x709 1990 Timberjack 240A cable Skidder that’s working TIMBERJACK 208 208 Timberjack for sale, skidder daily. Has a 5.9 cummins is pretty solid all around, has a engine. Both the engine and couple leaks, but motor fires transmission were rebuilt in right up every time. Has new 2021 with paperwork showing ‘05 Gehl CTL 70 starter, everything else on it the work. Winch transfer case was rebuilt shortly after.

Itemalso ID: JW-986495 works like it should.

Pins and bushings are all tight, Contact: J Williams Item ID 5320. Austin x703 and is woods ready. x701 Call/Email Ph: (888) 401-6367 ‘83 John Deere for more informati on.

JOHN DEERE 540D Item ID 5082. Austin x703 4850 John Deere 540D cable.

Skidder new transmission, Item ID:has 14073 new hydraulic Contact: Austinpump, and all of the cylinders were recently Ph: (888) 401-6367 x703 repacked. Has 23.1 tires all around and comes with new with 1700 hours, in very good condition. Easily produces high

chain conveyer, 8 way splitter, on

1996goose TIMBERJACK 20,000lb neck trailer.380C Item ID 1996 Austin Timberjack 13916. x703

380C 5.9 Cummins, 4 speed Clark Best Value Portable Log Splitter Transmission 4 forward, 4 reverse, - Small manufacturer in PA has

made the best valued log splitter.

Tough Meets QUALITY

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 430

Handles logs up to 32”. Uses

13HP Honda motor. Manual start but electronic option is available.

Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off

sales@toughseats.com of a 4 cylinder Mercedes power toughseats.com

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Item ID: JW-909632 Contact: J Williams chains all around, new cable, Ph: (888) 401-6367 x701 new steering pins, have new center pins in box current pins are fine. Minor leaks, good running machine.

Item ID 4825. Austin x703 02′ JOHN DEERE 640G2 2002 John Deere 640G2 Cable skidder with 14000 frame hours, has new motor in it with less than 200 hours on it, and the wasTrack rebuilt ‘13transmission KMC 2500 around the same time. Has all Skidder new bearings in the front end, as well as ID: a new seat, new gauges, Item 14078 new heater,Austin new glass, and new Contact: lights.

Has401-6367 23.1’s onx703 it with Ph: (888) brand new chains on the front.

On a job now. Call for more info.

4710. Austi offItem ontoID a conveyor.

Thisnisx703 a very

well built processor. Item ID 13820.

86′ TIMBERJACK 230A Sam x702 Motor rebuilt about 10 hrs ago, Firewood Processor - This is Same with brakes and new a Chomper Model 16plate PDA (10hrs clutch / pressure automatice ago), This isfirewood in goodprocessor conditions, NOT old Deere junk. power It’s good go with John unit to with to work, Owner for 10+yrs, and low hours. Control panel includes used for jobs here and there, tach, oil pressure, water temp and been the family skidder, Can amp gauges.

Cuts logs upcan’t to 16”. take videos of it if you go One owner and comes with all it look at it, Can help trucking anywhere the US, About manuals andinreceipts.

Purchased 80mi south of Balti more, MD new for $32,500. Item ID 13865.

Item ID 3605. Joe x709 Sam x702

LOGGING EQUIPMENT BANDIT

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703 FRANKLIN 170 SKIDDER Detroit 453 engine, Powershift, 4 speed, Winch works well, Tires size: 23.1, Center section good, Runs and operates as it should Item ID 3517. Joe x709 98′ John JOHN DEERE 640E ‘95 Deere C6 1998 John Deere 640E cable Tree skidder withFarmer 10000 original hours, this skidder was bought directly Item ID: 13920 from the original owner/operator.

Contact: Austin Everything like itx703 should.

Ph: (888)works 401-6367 Call for more info.

Item ID 2701. Austin x703 capacity!. Item ID 13421. Sam x702

98′ JOHN DEERE 640G BARKO 98ʹ Model John Deere 640G 1994 10000 Barko 160B - Electric with original hours, very knuckleboom, boom, straight skidder30'that was75hp bought from theRotobec originalcontinuous owner/operator, motor, everything works like it should. grapple, 5,000 original hours.

Call for more info. (excellent condition.). Item ID Item ID 2694. Austin x703 13238. Chris x700

1995JOHN Barko 775 B Feller Buncher DEERE 440C’S

PACKAGE DEAL400 hrs - Pumps recently redone.

Up for sale are two John started Deere on injection pump. always 440C Cable skidders, one is in good. in good working order. 22in great shape, winch just totally kohingand head. works great. rebuilt andhead working daily.

The Item ID 13185. x702 other has the Sam transmission out of it, Barko the trans been rebuilt, 1999 160Dhas - new engine with but has not been put back in the approximately 1500 hours. Hour skidder. Call for more info. meter dont work. The last 2 owners Item ID 1966. Austin x703 have only used it to load trucks or

as a backup as needed. Has a CTR

Direct Bolt-In Seats Makes/Models 1999 Bandit 1900 Tracked Discfor Most delimber, grapple has been rebuilt.

Chipper - Cat Under Carriage at

Boom cylinders have minor leaks.

Diesel. 7500 Hours. One owner.

94 Barko 275 - Excellent value

50% or better. 475 hp Cummins

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine

Item ID 13694. Sam x702

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

“WE KNOW SO YOU DON’T HAVE with 850 HP. 5300SEATS hrs. Mill in BELL TO!” good condition. Just finished 10 TOLL Acre clearing job, ready to work!

FREE Remote control. Big production

1990 Bell Super T - This Bell has

855-579-0538

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

PRECISION CUT STOCK

The Tree that Started it All!

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

Donna Heninger

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

May be sent to­ morris@lumbermens.co

feed deck 20 foot out feed deck

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

AD SUBMISSIONS

with 44 inch wheels, and all the

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

FULL PRODUCT STAVE, hours on this machine since it Hot Springs, ArkansasLINES FOR10PALLET, GRADE AND RAIL TIE INDUSTRIES. www.arkloggers.com has been rebuilt, it has a 24foot in

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

MAILING ADDRESS

Danckaert Band Resaw - Roughly

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

Escanaba, Michigan

PUBLISHER

ADVERTISING SALES

Boonville, New York www.starwebhosting.net/woodsmen/

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is CW Mill-ArmorHog .............. 17 GOLDEN published monthly

by Woods EAGLE GANG SAW SYSTEM CW Mill-Hogzilla ................... 15 Publishing, P.O. Box 1916, • Dust Free Lumber Columbia, TN 38402. All rights 35 reserved. All editorial/ advertorial • Single, Double, orDyna Twin Products Double ........................

Arbors submissions are used at the Empire Hydraulics ................... 8 • Built-In Planer Sizer discretion of the publisher and may be edited for purposes of clarity Great Lakes Mfg. .................... 34 and space. Although all efforts have Hahn Machinery ...................... 3 been made to ensure accuracy of content submitted by advertisers Hurst Boiler ............................. 14 and writers, the Lumberman's Exchange, its principles and Iron Bull ................................... 21 associates, are not held liable for errors or omissions. Reproduction, Kilgore Saw ............................. 22 in whole or part, is prohibited with­ Lignomat ................................. 24 out written consent. ©2017 Woods Publishing

Rotochopper............................ 40

- USED FORESTRY EQUIPMENT FOR SALE

❘

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

Row Electric ............................ 20

•

8” to 25” Bay Widths

Sawmill Exchange ..................

• As Thin as .125 Kerf in11Double Arbors Select Sawmill .........................

• Variable Feed Rates 19 Smith Sawmill ........................... 4 The Paul Bunyan Show ......... 39 Thomas Industrial Controls..... 10 Union Grove Saw & Knife.. 2, 37 Universal Refiner ................... 23

www.BakerProducts.net 800.S48.6914 I S73.663.7711

WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

❘

 (888) 401-MENS L!

NO. 7

Phone 315.284.4126 1983 JOHN DEERE 640C Faxlogging jobs in the early 90’s 315.849.2045 John Deere 640C grapple followed by light service in shot Website skidder, has rebuilt in 2018. Call/Email for more www.empirehyd.com Email transmission less than 200 information.

“Precision Under Pressure” info@empirehyd.com

hours ago, motor is strong with no blow by. Tight and has been well maintained. Call/Email for more information.

Item ID 5582. Austin x703 FMC 210 FMC 210 CA 5250 track skidder, needs the transmission rebuilt. It has a 653 Detroit motor in it with low hours.

Skidder was refurbished in 1089 used in a handful of

Item ID 5526. Austin x703

CAT 225LC EXCAVATOR Cat 225 machine starts right up, and has no big leaks. Will include a 28” and 48” bucket, also will include set of grapples.

Call for more information.

Item ID 5419. Austin x703 06′ JOHN DEERE 335 LOG LOADER Motor has brand new pump.

Does not smoke at all, New manifold, Brakes and lights all work, A/C – heat work well, Machine is dry, has no leaks, Boom is strong. Fast loader, Turn bearings are good, Owner’s health is causing him ‘16 H140as to sellHalverson it, Delivery available well.

Buyer pays for trucking, Skidsteer (DEMO) About west of Orlando FL Item 70mi ID: JW-909632 Item IDJ 5403.

Joe x709 Contact: Williams

off onto a conveyor. This is a very Sam x702

grapple, 5,000 original hours.

Ph: (888) 401-6367 x701 TAJFUN EQUIPMENT Lumbermens is a proud dealer for Tajfun equipment, from logging winches, to cranes, to firewood processors, Tajfun

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

well built processor. Item ID 13820.

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 430

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

‘93TIMBERJACK Barko 180B 1010

Item ID: 14077 Timberjack 1010 double bunk Contact:machine Austin has around forwarder, Ph: (888) 401-6367 15000 frame hours, x703 and has had a lot of recent work done to it. That work includes: New Reman Perkins engine, New Radiator, Rebuilt Clark 3 speed tranny, Brand new bushings and pins in center section, rebuilt cylinders in boom and in the steering, New set of sure grip grapples, new seals John Deere C6a in ‘95 driveline.

It will come with setTree of ecoFarmer tracks for the back, and set of Item ID:wheel 13920track for the front which are brand new.

Contact: Austin This a straight machine that Ph:is (888) 401-6367 x703 is not bent or busted up. It has had the same owner/operator since it had 6000 original hours capacity!.

ItemisIDonly 13421.

Sam x702 on it. Owner selling to BARKO retire. Call/Email for more informati on.160B - Electric 1994 Barko Item ID 5358. n 75hp x703 knuckleboom, 30'Austi boom,

‘13 KMC 2500 Track Skidder 13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

machinery makes high quality equipment. Call us for more information and a competitive quote today!

Item ID 5368. Austin x703

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 9

Phone 315.284.4126 Faxevery time. Has new starter, 2022 TIGERCAT 620H 315.849.2045 2022 Model Tigercat 620H everything else on it works Website grapple skidder with www.empirehyd.com 660 like it should. original hours, has bogieEmail Item ID 5320. Austin x703 “Precision Under Pressure” info@empirehyd.com

grapple on it. 35ʺ tires, and Canadian light package, and camera in front on the grill. Skidder is in excellent shape. Call/Email for more information.

Item ID 5334. Austin x703

CAT 538 2020 Cat 538 log loader with 2800 hours on it, still has warranty available. Working daily. Call for more information.

Item ID 5302. Austin x703

TIMBERJACK 208 208 Timberjack for sale, skidder is pretty solid all around, has a couple leaks, but motor fires right up

TIMBCO 445EXL Timbco 445Exl with 8500 original hours, in excellent condition. Machine has been well maintained and serviced.

Needs nothing, working daily. Call/Email for more information.

Item ID 5293. Austin x703 2016 TAJFUN 400 JOY 2016 Tajfun 400 Joy firewood ‘16 Halverson H140 processor, unit includes log lift, and outfeed conveyer.

Machine Skidsteer (DEMO) has a one owner/one Itembeen ID: JW-909632 operator unit since new and Contact: J Williams isPh: in (888) excellent conditi on. Call/ 401-6367 x701 Email for more information.

Item ID 5227. Austin x703 2003

TIMBERJACK 1270 Timberjack 1270

Processor, machine is working daily and is averaging 300 cords a week currently. Owner is only selling to upgrade to a brand new machine.

Recent work includes a new ‘93new Barko 180B ECU, injectors, new fuel Item ID: 14077 pump, new fuel lines, new Contact: Austin wiring harness, new chip, new Ph: window, (888) 401-6367 x703 rear all new head cylinders, and pins/bushings, new encoders, and new seal kits. Head is super tight and has a new measuring wheel, and new rotator. Everything on the machine works as it should and currently has 24000 hours.

Item ID 5199. Austin x703

‘95 John Deere C6 PRENTICE 210B Tree Farmer

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 430

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

210B ce Knuckleboom, ItemPrenti ID: 13920 comes with reversible csi Contact: Austin bucksaw.

Ph: (888) Works 401-6367everyday, x703 has joystick control, all new hoses on the boom, brand new grapple as well. Pretty tight and capacity!.

ItemOnly ID 13421. x702 good loader. thingSam it does BARKO need is brakes.

Item ID 5085. n x703 1994 Barko 160B -Austi Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 11

Phone 315.284.4126 Fax LIEBHERR A312 BELL SUPER T CUTTER WITH RYANS HEAD 315.849.2045 Bell Super T 3 wheel machine, Website 1998 Model Liebher A312 mobile has the deutz air cooled www.empirehyd.com wheeled with 9300Emailengine, with a 30” dangle head.

“Precision excavator Under Pressure” info@empirehyd.com

hours, equipped with newer Ryans saw head attachment. Both in good condition, the excavator has all new hoses, good tires, new lights, and back up camera. The Ryans head has low hours as well.

Item ID 4979. Austin x703

13′ BARKO 595ML MAGNUM 2013 Barko 595 Magnum loader has 11000 original hours, equipped with 264 Csi delimber. Recently had two of the pumps rebuilt. Good, solid loader everything on it works as it should. Call/Email for more information.

Item ID 4974. Austin x703

Inside the cab it has levers for controls, and does also have air conditioning. Tires are size 28L and will come with chains as well. Overall in good condition, and ready to work. Call/Email for more information.

Item ID 4952. Austin x703

CAT D5H TSK Cat D5h TSK track Skidder with 3700 original hours, 32” pads, and good undercarriage at around 80%. Ready to work. Call/Email for more information.

Item ID 4939. Austin x703

643J 18′ JOHN DEERE 753J 2007 643J cutter with 12,700 2018 John Deere 753J with hrs, thinning saw head, 28LX26 6000 original hours. Ready to tires, new starter,batteries, alt, 13428 PO Box 124 work, onlyVictory selling Ln. to // downsize. gear box rebuilt, motor runs Adams Center, NY 13606 Has good undercarriage, and great uses no oil, does have hotsaw head. Call/Email for a Hydraulic leak or 2, needs more information. a bushing in one of cylinder arms, also comes with a 843J Item ID 4968. Austin x703 parts machine, has a tpost saw

head,motor and Hydraulics are good 30k for both Item ID 4907. Austin x703 04′ TIGERCAT 620 2004 Tigercat 620 Tigercat Grapple skidder has brand new ‘16 Halverson engine in it, with less H140 than 10 hours on it, and(DEMO) comes with a Skidsteer year Machine itself Itemwarranty.

ID: JW-909632 isContact: pretty tiJght, speed control Williams valve is new, main Ph: (888) 401-6367pumps x701 are fairly new as well. Has heat/Ac, every function on the skidder works. Call for more info.

Item ID 4705 . Austin x703 2009 JOHN DEERE 548G3 2009 John Deere 548G3 with 7700 original frame hours, skidder is tight, and has a new engine in it with less than 400 hours on it. New 28L tires, ‘13 KMC 2500 Track Everything on the machine Skidder works like it should. Call for more Iteminfo.

ID: 14078 Item ID 4699.

Contact: AustinAustin x703 Ph: (888) 401-6367 x703 14′ JOHN DEERE 748H 2014 John Deere 748H model with frame off onto15000 a conveyor.

This is hours, a very everything works like it should.

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 430

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

Recently had new pins and bushings, and new motor installed just over a year ago.

Equipped with sweda axles.

Call for more info.

Item ID 2707. Austin x703

‘93 Barko 180B

Item ID:HYPRO 14077 755HB 2016 Contact: Austin PROCESSOR Ph: (888) x703 le Tractor is 401-6367 a 1985 Versati 276 tractor that has a flex plate between the engine and pumps, equipped with skid plate under the engine, and some new lights. Engine is a 140HP cummins, and has 3200 hours on it. The Hypro only has 350 hours on it and is in great shape. Call for more ‘95 John Deere C6 informati on Item ID 2593.

Austin x703 Tree Farmer

Item ID: 13920 TIMBCO 425D Contact: Austin Timbco 425D – Year x703 2001 – Ph: (888) 401-6367 Quadco 20 360 degree head – 8.3 Cummins – Hours 7000 / 300 hours on caterpillar capacity!. Item ID 13421.

Sam x702 undercarriage – new planetary BARKO spindle. bearings and one seals in1994 both sides.

Barko 160B - Electric Item ID 1429. x703 knuckleboom, 30'Austi boom,n 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

CARRIAGES & DRIVES

LINK** Carriages (Sawmill) - Cardinal Field Proven Design forINFO the Independent Hardwood Sawmill MAILING ADDRESS

2010 Cardinal HD Carriage

Carriage line it includes carriage

B & B Mfg . ...............................

18 M&F Gauge ............................. 28- Two proven P.O. Box 1916 • Corley lnfeed and Edger with Lewis Optimization with onboard log turners, carriage Columbia, TN 38402-1916 B. H. Payne .............................. 16 Meadows Mill, Inc. ................ 33 drive, hyd pac for carriage, (888) 401-6367 names with proven results Menominee Saw .....................

29 Baker ......................................

5, 7 sawyers cab, computer controls, AD SUBMISSIONS May be sent to­ cabinet with electronic drives for • True HardwoodBell's Optimization Machining ..................... 27 Metal Detector's Inc. .............. 30 morris@lumbermens.co carriage knees, husk including Brute Force Mfg. ..................... 31 Midwest Sharpening.............. 26 • Small footprint that fits inside most existing mills POSTMASTER 48" bottom saw and 36" top saw Buck Equipment (AIM) ........ 36 Morbark ..................................... 9 Send address changes to: Exchange •Lumberman's Value priced with allMfgof.............................. the optimization capability12 of more Corley 32 Multitek ...................................

P.O. Box 1916 Columbia, TN 38402 CRD Metalworks ....................

25 Piper's Saw Shop.................... 13 elaborate high speed Edger Optimizers

STACKING For more information on our new "M" Series Edger RAC and

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

other Corley and Lewis products, give us a call.

LEWIS CONTROLS CORLEY SAWMILL OPTIMIZATION MACHINERY Chattanooga, Tennessee Iron Bull ................................... 21

Kilgore Saw ............................. 22 Phone 423-698-0284 Lignomat ................................. 24

www.corleymfg.com

- USED FORESTRY EQUIPMENT FOR SALE

❘

Cornelius, Oregon

Union Grove Saw & Knife.. 2, 37

Phone 503-648-9119

Universal Refiner ................... 23

www.BakerProducts.net

WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY l§

www.lewiscontrols.com 800.S48.6914 I S73.663.7711 ❘

 24/7 SUPPORT 0

❘

 (888) 401-MENS L!

NO. 13

Phone 315.284.4126 FaxSkidder. Starts and runs perfect.

725B TIMBERPRO Well Maintained machine, ti315.849.2045 ghtWebsite Excellet condition, Excellent and dry work ready with awww.empirehyd.com Rolly tires. Eaton Winch, Straight II “Precision head. make offer! Call forEmailBlade. Call for more pictures.

Underan Pressure” info@empirehyd.com

more pictures.

Item ID 1398. Austin x703

Item ID 1072.

Kyle (807) 631-4081

’92 TIMBERJACK 450C 10K frame hours – single arch – power-shift trans – tire size 28Ls – Tire tread: 20% front, 70% back – 5.9 cummins – Winch works – center section is tight – no major slack, dry machine, no leaks Item ID 1369.

Robert (606) 875-4783

LOG LOADER EXCAVATOR 225 LC 1986 Caterpillar excavator with a 3208 engine 5000 hours, total hours is 19000, Grapple, heals, bucket.

Item ID 1067.

Mose (208) 290-1888

TIGERCAT 822 Item ID 1130. Austin x703

PRENTICE 384 KNUCKLEBOOM LOADER 2002 prentice 384 Knuckleboom.

Saw not included. Mounted on ’89 S 2500 International truck.

Knuckleboom carrier/trailer also available.

Item ID 978. Austin x703

460 TIMBERJACK New Motor, new center pins, and Hyd Pump Cummins = 100hours on the new parts , Tires are at 60%, comes with a spare tire. Text or email for more pictures TIMBERJACK 380C 13428 Victory Ln. // PO Box 124 Item ID 1124.

GRAPPLE SKIDDER Adams Center, NY 13606 1994 timberjack 380C 5.9 Marcus (660) 833-9061 Cummins, 12 valve, 4 speed Clark transmission 4 forward 4 1979 TIMBERJACK 230 reverse, external tranny cooler, CABLE SKIDDER 1979 Timberjack 230 Cable 28L’s, tranny less than 1000

hours, motor redone no blow by, centers redone recent, no leaks, dry very minor seep on valve body and grapple controls.

Rear ends redone a year ago, full time 4 wheel drive, John Deere winch, good winch, strong ‘16 Halverson H140 winch!

Call for more pictures!

Item ID 863.(DEMO) Sam x702 Skidsteer

Item ID: JW-909632 JOHNJ Williams DEERE 648D Contact: new main drive shaft , motor Ph: (888) 401-6367 x701 rebuilt 200 or so hours ago, rebuilt fuel injector, hydraulic rebuilt, grapple rebuilt, w/ winch single arch tight machine 60% rear 40% front 28l’s Item ID 547. Sam x702 JOHN DEERE 550G CRAWLER DOZER New head gasket, Both final drives replaced, U/C tread: ‘13 KMC 2500 Track Approx. 75%, 20 inch pads, Skidder Direct drive, Pedal steer, Winch works well, it’s the JD Item ID: 14078 4000 series, Everything works Contact: Austin as it (888) should, This is x703 his backPh: 401-6367 up dozer, why he’s selling.

Doesn’t need it much anymore, Delivery availableThisas well. off onto a conveyor. is a very Buyer pays for trucking, About

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

vans and produce 6 - 8 loads per

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 430

adjustable to single two way. Great

Well maintained. Item ID 13294.

Lumbermens™  since 1986

❘

(excellent condition.). Item ID

good. in good working order. 22in

50% or better. 475 hp Cummins

Firewood Processor - This is a Rotary Dryers homemade processor with a 10’ Sand Dryers log deck.

Has a hydraulic grapple, Grain Dryers Lumber chain andKilns kicker that all runs off Cement Kilns of a 4 cylinder Mercedes power Brick Kilns unit. Has a 4’ chain saw that kicks

grapple, 5,000 original hours.

tach, oil pressure, water temp and

low hours. Control panel includes

but electronic option is available.

Value! PA. Item ID 12062. Sam x702

motor, Rotobec continuous

- Pumps recently redone. 400 hrs

Has Log Lift. Uses 4-way wedge

quality chips with patented ‘Cone’

Enclosed Winch strong, Item ID:cab, 13920 New sprockets go with it, Contact: Austin Undercarriage 55%, Has Ph: (888) 401-6367 x703no mechanical issues, been taken care of, The owner is done with a project he bought it for, Have ID 13421.

Sam x702 acapacity!. reliableItem trucker available.

BARKO Buyer pays for trucking, About 80mi south160B of Louisville, 1994 Barko - Electric KY Item ID 3787.

Joe x709 knuckleboom, 30' boom, 75hp

with John Deere power unit with

day. Item ID 13882. Austin x703

condition. Easily produces high

‘95 John Deere C6 06′Farmer JD 700J LGP Tree

automatice firewood processor 1995 Barko 775 B Feller Buncher Clean-Burn Design

drum design. Can easily load 42’

with 1700 hours, in very good

16′ JD 700K 6 Way blade, Fully Enclosed cab, Forestry Package with winch, ‘93 pads, Barko Wide A/C 180B – heat work, Item has ID: had 14077 Owner it sine purchase.

Contact: Now done Austin with his project.

Ph: himself (888) 401-6367 x703else, Got something smaller, All controls work as they should, These go for $170$175K anywhere you look (for the year), and without a winch.

This one has everything. Have a reliable trucker available. Buyer pays for trucking, About 150mi south of Louisville, KY Item ID 4343. Joe x709

Innovative 13238. Chris x700

a Chomper Model 16 PDA

amp gauges. Cuts logs up to 16”.

Manufacturing a full line of biomass fired One chain conveyer, 8 way splitter, on combustion systems backed with fifty years of owner and comes with all 20,000lb goose neck trailer.

Item ID manuals and receipts. Purchased innovative clean-burn design. Diverse in every way with multi-fuel blending capability.

Hurst 13916. Austin x703 new for $32,500. Item ID 13865. stokers utilize hundreds of common and Sam x702 Best Value Portable Log Splitter abundant solid biomass fuels.

- Small manufacturer in PA has Large or small scale, project LOGGING EQUIPMENT management is eased with the made the best valued log splitter.

BANDIT impressively short installation time Handles logs up to 32”. Uses 1999 Bandit 1900 Tracked Disc required with prefabricated 13HP Honda motor. Manual start Chipper - Cat Under Carriage at modular components.

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

50mi south of Cincinnati OH Item ID 5388. Joe x709

Diesel. 7500 Hours. One owner.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

on injection pump. always started kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

50

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

YEARS control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 15

Phone 315.284.4126 Faxtrucker available. Buyer pays 12′ JD 550K LGP Rollers sprockets, chain 315.849.2045 andWebsite for trucking, In KY, about 90mi. pads all re-done about www.empirehyd.com 75hrs north of Nashville TN ago, Just Under had Pressure” a John DeereEmail Item ID 3686. Joe x709 “Precision info@empirehyd.com

4000hrs service, All fluids an upgrades are up to date, No issues, very clean, no leaksI’d say machine is mint, Tracks are 24 inches with a 10’2” wide blade, Brand new U/C, 95%, Forestry package with winch, Enclosed cab, A/C and heat works and everything else, Owner is going with a bigger dozer, Ready to go to work, really solid dozer!

Information provided is to the best of our knowledge and what owners tell us Item ID 3753. Joe x709

14′ JD 650K LGP 29 inch pads, All bushings are tight, Dry, no leaks, Pre def emission delete engine turned up 20hp, Forestry package, Winch on it only been used about 600hrs, 10 foot 4 inch blade, Owner is retiring, Can help trucking it anywhere in the US, In the Fresno, OH area Item ID 3574. Joe x709 CAT D6K2 2015 model in excellent condition, currently has 1750 hours, has enclosed cab with heat and air, undercarriage is around 75%, working daily. Call for more info Item ID 1488. Austin x703

JD 550G LT Mid 90’s model, Original hours, Forestry package with a winch. It pulls good, UC tread: about 70%, Nothing wrong whatsoever with dozer, Been Victory // PO Box 124 well13428 kept and usedLn.sporadically 92′ CAT D5H Center, NYle13606 by himAdams and his son, litt jobs Item ID 4678. Joe x709 here and there, They’re buying a skidder with the money 04′ JD 450H they get from this, why are Wide tracks, limb raisers, AC/ they selling it, Have a reliable Heat, all controls work, Dozer is

in really MINT conditions, One original owner, used for local jobs, not a major operation, He’s now 70yrs old and he’s willing to sell. He’s using it for one more week or so to finish a little job he has left, Have a ‘16 Halverson H140 reliable trucker available.

Buyer pays for trucking, About 40mi Skidsteer (DEMO) south TN Item of ID:Nashville, JW-909632 Item ID 4327.

Joe Contact: J Williams x709

Ph: (888) 401-6367 x701 90′ JD 550G He has all of the side cab screens and the rock guards, Winch is strong, New hydraulic pump, New transmission pump, New batteries, U/C is at about 60% tread, New front idler & track adjuster, Runs well, no issues, Direct drive, Been serviced regularly, all the paperwork avail., Owner is done with the ‘13 KMC 2500 Track project, letting it go, Have a Skidder reliable trucker available. Buyer pays forID: trucking, Item 14078Better pictures avail. upon request, About Contact: Austin 100mi south of Columbus, Ph: (888) 401-6367 x703OH Item ID 3873. Joe x709

CASE 650H off onto 02′ a conveyor.

This is a very 4BT Cummins engine, Wide

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is a Chomper Model 16 PDA

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 430

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

3-5

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

tracks, Open ROPS, Undercarriage tread: 80%, 2 owners only. Current owner owned it for 2yrs. Owner is retiring and doesn’t make much use of it, Every control works. All works ‘93operates Barkoas180B and it should, Item ID: 14077 for serious Videos available Contact:Can Austin inquiries, help trucking (888) 401-6367 x703 it Ph: anywhere in the US, About 60mi south of Kansas City, MO Item ID 3511. Joe x709 03′ JOHN DEERE 648G III SKIDDER Hours Meter Reading: 13000, Tires size: 28L 26, Axes 1400, A/C works, heat good, Winch works fine, Direct Drive ‘95 John Deere C6remachine, Transmission was built at 10000 hours by current Tree Farmer owner, Engine Item ID: 13920re-done by previous owner, about 4yrs ago, Contact: Austin Owner bought a smaller, a bit Ph: (888) 401-6367 x703 newer skidder, Delivery available as well. Buyer pays for trucking, About 90mi west of Birmingham capacity!.

Itemon IDprovided 13421. Samisx702 AL, Informati to BARKO the best of our knowledge and what owners tell-us 1994 Barko 160B Electric Item ID 5647.

Joe x709 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

’95 JOHN DEERE 548G II SKIDDER New reman motor put in 4-5mo. ago (all receipts available). Work done by Schaefer Enterprises in Wolf Lake, IL, Skidder will be ready for delivery on/around Nov. 16, because bottom center Tree being repins are The currently that Started done, Almost all new U-joints thru the drive line, Skidder was it All! at work every day until last Since 1986, week, nowLumbermens at shop forhaspins, published Diff. locka monthly works, circular Tires size: reaching sawmills, loggers, 28L’s (Primex), Tires tread: 80% pallet makers, recyclers and all around, Turn cylinders are reindustrial woodworking plants packed, Everything works as it worldwide.

PUBLISHER

The

Woods Publishing

ADVERTISING SALES

** CALENDAR**

should, 1yr owner. Reason for years, he’s old and retiring, why selling he has another NY skidder Delivery available well.

STATEselling, WOODSMEN'S FIELDasDAYS bought, needs $$$ back inFri, his 18 Buyer pays for trucking, About August - Sun, 20 August pocket, Delivery available as Boonville, 60mi north New of Atlanta, York GA well. Buyer pays for trucking, Item ID 5452.

Joe x709 www.starwebhosting.net/woodsmen/ Closest city is Jefferson MO, 80mi south of it 12′ PRODUCTS JD 648H EXPO SOUTHWEST FOREST Item ID 5605. Joe x709Fri, 25Engine still 26 going strong, Augustis- Sat, August original motor.

Previous owner Hot Springs, Arkansas TIMBER JACK 450B re-built it at around 9000hrs, www.arkloggers.com GRAPPLE SKIDDER Tires size: 30.5, Tires tread: 72ND50-60% ANNUAL Cummins engine strong, allGREAT around,LAKES A/C and & HEAVY EXPO no issues, It’s got a LOGGING winch, heat work, EQUIPMENT Grapple and winch Sept well, - Sat,Center 9 Septsection works well, Tires tread: 60%,Thurs, both7 work Michigan Powershift, Everything work and Escanaba, is good. Previous owner had operates as it should, All controls center section re-done (5yrs+ MID-ATLANTIC LOGGING BIOMASS work, Owner has had it for many ago), Owner has &had it for

FOR CLASSIFIEDS Call 888.401.MENS 5yrs+, getting rid of one crew, Delivery available asprices, well. Buyer See pictures, and pays for trucking, 90min.at Location of allAbout equipment drive north west of Orlando, FL www.LumberMB\ISmagazine.com Item ID 5253. Joe x709 BANDMILLS & HEADSAWS TJ 450B Danckaert Band ResawTires - Roughly 5.9 Cummins engine, size: 30.5’s, Tires %: about 70% 10 hours ontread this machine since it allhas around, Esco grapple, Winch been rebuilt, it has a 24foot in works, Can have owner do videos feed deck 20 foot out feed deck for those that can’t go look at it, with 44 inch wheels, and allBuyer the Delivery available as well. bells for andtrucking, whistles, its a production pays About 60mi. north of Jackson machine, with airMS strain conveyers Item ID 5098.

Joe x709 that go up and down, with airbags, it includes two sets of Mcdonough

Fri, 15 Sept - Sat, 16 Sept

WOOD-PAKER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

The Number One Bundling Machine Line for PackagedCARRIAGES Firewood & DRIVES Austin Woods

** INFO LINK**

2010 Cardinal HD Carriage (888) ext. 703 B &401-6367 B Manufacturing is in the foothills of the Allegany Mountain range in Olean, New austin@lumbermens.co (Sawmill) - Cardinal York.

We have been in business since January 1985 producing woodCarriages bundling systems called “THE WOOD-PAKER” for the firewood and waste wood industry.

We line have geared MAILING ADDRESS Carriage it includes carriage B Mfg . ...............................

18 producers.

M&F Gauge .............................

28 Box 1916 our P.O. machinery to meetB & the needs of various We offer several different types of with onboard log turners, carriage Columbia, TN 38402-1916 equipment for packaging wood from shrink wrapping, stretch33wrapping and bagging.

B. H.your Payne ..............................

16 Meadows Mill, Inc. ................ drive, hyd pac for carriage, (888) 401-6367 However you wish to BUNDLE we have a system for you.

AD SUBMISSIONS

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

May be sent All to­ these systems provide convenient packaging of30waste-wood, cabinet with electronic drives for Inc. ..............

Bell's Machining .....................

27 Metal Detector's morris@lumbermens.co slabs, edgings and firewood for the consumer market.

POSTMASTER

Brute Force Mfg. ..................... 31

carriage knees, husk including

Midwest Sharpening.............. 26

48" bottom saw and 36" top saw

Buck Equipment (AIM) ........ 36 Morbark .....................................

9 Send address changes to: THE WOOD-PAKER LINE INCLUDES: YOUR ONE-STOP SHOP FOR Lumberman's Exchange BUNDLING SUPPLIES Corley Mfg 32 Multitek 12 • The WOOD-PAKER: 6 models of.............................. the HEAT SHRINK oven ...................................

P.O. Box 1916 Columbia, system.TN 38402 CRD Metalworks .................... 25 Piper's Saw Shop.................... 13

STACKING RAC

• The WRAPPER: person stretch wrap unit17electric and ............................ 40 The Lumberman's Exchange is Single CW Rotochopper Mill-ArmorHog .............. published monthly by Woods manual available.

CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 Publishing, P.O. Box 1916, • The Columbia, TNBAGGER: 38402. All rightsA conveyor system using horizontal mesh Dyna Products ........................ 35 Sawmill Exchange .................. 11 reserved.bags.

All editorial/ advertorial submissions are used at the Empire Hydraulics 8 Select Sawmill ......................... 19 • The TILT BAGGER: Single person unit................... using mesh bags. discretion of the publisher and may be edited for purposes of clarity Great Lakes Mfg. .................... 34 Smith Sawmill ........................... 4 and space. Although all efforts have Affordable and Easy toMachinery Operate • 3INCREASE YOUR The Paul Bunyan Show ......... 39WOOD PROFITS! Hahn ...................... been made to ensure accuracy of content submitted by advertisers WOOD-PACKAGING has come into its own.

Hurst Boiler ............................. 14 Thomas Industrial Controls..... 10 and writers, the Lumberman's Exchange, its principles and Iron Bull ................................... 21 Union Grove Saw & Knife.. 2, 37 associates, are not held liable for errors or omissions. Reproduction, Kilgore Saw ............................. 22 Universal Refiner ................... 23 in whole or part, is prohibited with­ B & B Manufacturing • 3007 West River Road • Olean, NYwww.BakerProducts.net 14760 Lignomat ................................. 24 WoodMizer ................................ l out written consent.

800.S48.6914 I S73.663.7711 E-mail: bbmfg@verizon.net • www.thewoodpaker.com ©2017 Woods Publishing

716-373-5881

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

❘

 (888) 401-MENS L!

NO. 17

Phone 315.284.4126 Faxworks fine, Original Cummins JD 648L motor, Being used as a spare Dual arch, Center secti315.849.2045 onWebsite skidder. Owner makes little is tight, Tires tread: approx. www.empirehyd.com Email use of it, why he’s selling, 40% front, 60% back, A/C “Precision Under Pressure” info@empirehyd.com

– Heat work, Pins are tight, no leaks, Clean woods ready skidder, Owner is changing business, going into trucking, Have a reliable trucker available. Buyer pays for trucking, About it and 70mi north of Jackson, MS Item ID 5073. Joe x709

About 150mi. east of St. Louis, MO by Evansville, IN Item ID 4918. Joe x709

98′ CAT 515 Will have more pictures for serious inquiries, Single arch, Transmission has been rebuilt, before owner bought it 4years ago, 50 ton CAT 15′ TIGERCAT 610E winch, Only thing owner 2015 model Tigercat 610E has done to it is he replaced grapple and winch, dual the internal filter up under arch Skidder. Has 8400 belly pan, A/C doesn’t work, frame hours, with brand Heat does, Other than that, new hydrostats. Skidder is he’s had no issues. Only currently working daily. Call/ reason for selling is he can’t Email for more info. keep people at work, so…. he’s selling, Have a reliable Item ID 4944. Austin x703 trucker available. Buyer pays for trucking, About 100mi 98′ TJ 460 Cummins motor (put on north of Johnstown, PA 134282yrs Victory Ln. Tires // POsize: Box 124 Item ID 4671. Joe x709 approx. ago), Equipment 13606 28L’s, Adams Tires Center, tread: NY approx.

Digest 40% all around, New 1” main 99′ FRANKLIN 170 line on 120” grapple, Charge 5.9 Cummins engine, pump replaced a few years Powershift, Tires tread: 70back, New EGS shifter, Winch 80% on all of them, Enclosed

LUMBERMEN’S

cab, Single arch, ESCO grapple, Machine needs work, Center Section is good, Owner is just getting rid of his last skidder. Have a reliable trucker available.

Buyer pays for trucking, ‘16 Halverson About 90min. driveH140 north west of Orlando, Skidsteer (DEMO) FL. Information provided is to Item ID: JW-909632 the best of our knowledge Contact: J Williams and what owners tell us.

Ph: (888) 401-6367 x701 We just broker it Item ID 4586. Joe x709

02′ TJ 660D 3800hrs on rebuild motor, done 3yrs ago by current owner, Dual arch, Cummins ‘9506′John Deere engine, Tires size 30.5×32’s, TIGERCAT 635CC6 Tires tread: 30% , He owned 2006 Tigercat 635C Tree Farmer Bogie it for 3yrs and he’s getting out Skidder, has a 8.3 Cummins Item ID: 13920 of logging now, Have a reliable engine, with a lot of recent Contact: Austin ‘13 KMC 2500 Track trucker available. Buyer pays work includingx703 totally Ph: done, (888) 401-6367 Skidder for trucking, About 140mi new updated bogies, new LUMBERMEN’S Equipment Digestrebuilt motor, south Item of ID:Springville, 14078 MO. It’s in frontPO tires, Box 1146 Arkansas and other work. Skidder has Contact: Austin Columbia,capacity!.

TN 38402-1146 Item ID 13421. Sam been maintained andx702 is ID401-6367 4088. 1-800-477-7606 Joex703 x709 Ph:Item (888) Fax (931)well 388-3564 BARKO ready for the woods. Call for www.lumbermenonline.com more info.160B - Electric 13′ JD 648H 1994 Barko Item ID Motor was rebuilt 16 months off onto a conveyor. This is a very knuckleboom, 30' 3322 boom, 75hp ago, Tires size: 30.5’s, Tires well built processor. Item ID 13820.

motor, Rotobec continuous

Firewood Processor - This is

(excellent condition.). Item ID

Sam x702

‘05 Gehl CTL 70 PROTECT Them ALL ® Wrap With Pro-Tec-To ‘83 John Deere a Chomper Model 16 PDA

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

4850

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

Hydraulic Lines – Fuel Lines One owner and comes with all chain conveyer, 8 way Hoses splitter, on – Air Item ID: 14073 20,000lb goose neck trailer.

Item ID manuals and Contact: AustinElectric Wire Bundles – Control Cablesreceipts. Purchased Ph: (888) 401-6367 x703

13916. Austin x703

Best Value Portable Log Splitter

new for $32,500. Item ID 13865.

Sam x702

® with 1700 hours, in very good -® Small manufacturer in PA has LOGGING EQUIPMENT PRO-TEC-TO WRAP & PRO-TEC-TO SLEEVE

condition. Easily produces high the best valued log splitter.

CUT YOURmade DOWNTIME AND YOUR COSTS!

BANDIT

quality chips with patented ‘Cone’

Handles logs up to 32”. Uses Bandit 1900 Tracked Disc Protection Against Pinching, Crushing, Rubbing1999 & Abrasion 13HP Honda motor. Manual start Chipper - Cat Under Carriage at – EVEN UV RAYS! Both are Impervious to Oils and Solvents.

drum design. Can easily load 42’ vans and produce 6 - 8 loads per

but electronic option is available.

day. Item ID 13882. Austin x703Protection Hasfor LogLogging, Lift. Uses 4-way wedge Provides Maximum

EDGERS & GANGS adjustable to single Construction & Stationary Applications Like: two way. Great

Brewco Saws - Two Brewco Value!

ItemMasts ID 12062. Sam x702 • Debarker Buggies Saws • Pantograph Arms PA. • Forklift

50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

For The Distributor WellNearest maintained.

You,Item CallID 13294.

Sam x702

800-355-1250

• Wheel Loaders • Skidder • Knuckleboom in excellent condition.

Runs great. Grapples Firewood ProcessorLoaders - This is a 2004 Bandit Beast orModel Visit 4680 • Fellerbuncher Heads • Stroke Item ID 13644.

Sam x702Heads • Harvesting homemade processor with a 10’www.pro-tec-toproducts.com 3412 Caterpillar Diesel engine Delimbers • Dozer Blades FIREWOOD PROCESSORS log deck. Has a hydraulic grapple, with 850 HP. 5300 hrs. Mill in

Anywhere Hoses & Wires Are – Pro-Tec-To® Products chain and kicker that all runs off Offers Maximum Protection, Lower Costs, Reduced - It has a 353 Detroit diesel, 40 Downtime and Less Spills! of a 4 cylinder Mercedes power 2010 Shop Built Wood Processor

inch insert tooth circle saw, 30 foot  Issue 364 430

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

tread: back 100%, front 3040%, Missing door on engine compartment on the right side, Center pins are good, A/C and heat both work, This skidder only logged 1-3 days 180B a ‘93 weekBarko for the past 2 years.

Item ID: 14077 Dual arch, Spare skidder, Contact: Austin the cable, Winch is missing Ph: (888) owner never401-6367 used the x703 winch at all, Owner just put $2k worth of new pins and bushings on the boom, Grapple works, no leaks. Starts right off, Can help trucking it anywhere in the US, About 160mi south of Tallahassee, FL Item ID 3589. Joe x709

good condition.

Just finished 10 OEM’s, Repair Facilities & Distributor Inquires Welcome Acre clearing job, ready to work!

Remote control. Big production

 List  seLL  exchange  buy  save

grapple, 5,000 original hours.

13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

1990 Bell Super T - This Bell has

a brand new Duetz engine. Lever

control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

FW-16 FIREWOOD WRAPPER IN-STOCK & READY TO SHIP!

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The GoThe FastTree Firewood Wrapper produces firewood that better Started it All! bundles than the rest.

The FW-16 Firewood has Wrapper Since 1986, Lumbermens published monthly is builtawith truecircular gear reduction, reaching sawmills, loggers, large bearings, andand heavy-duty pallet makers, recyclers industrial woodworking plants frames, outlasting the worldwide. competition.

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

Simple, Safe, and Reliable.

MID-ATLANTIC ADVERTISING SALES Morris Woods

LOGGING & BIOMASS EXPO

Standard Features: (888) 401-6367 ext. 704

Options:

• 1/3HP 120V Motor

• Wheel Kits

• ForkJohn Pockets Williams

• Automatic Wrap Cycle!

morris@lumbermens.co

MARKETING DIRECTOR (888) 401-6367 ext. 701 j@lumbermens.co

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

Production Without Compromise - THAT’S THE GO FAST WAY THE PAUL BUNYAN SHOW

1-800-854-7439 WWW.GOFASTMFG.COM

Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

Brute Force Mfg. ..................... 31

‘94 Caterpillar 320 Sharpening.............. 26 Midwest

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Item ID: 13936 Mor bark .....................................

9

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

May be sent to­ morris@lumbermens.co

POSTMASTER

Bell's Machining ..................... 27

Corley Mfg .............................. 32 CRD Metalworks .................... 25 CW Mill-Hogzilla ................... 15 Dyna Products ........................ 35 Empire Hydraulics ................... 8 Great Lakes Mfg. .................... 34 Hahn Machinery ...................... 3 Hurst Boiler ............................. 14 Iron Bull ................................... 21 Kilgore Saw ............................. 22 Lignomat ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE

❘

Metal Detector's Inc. .............. 30

Contact: Austin Multitek ...................................

Ph: (888) 401-6367 2006 CAT 517 x703 12 Piper's Saw Shop Item ID: 13869.................... 13 Contact: Sam Rotochopper ............................ 40 4000 convertor Ph:hours.

(888)Torque 401-6367 x702

Row Electric ............................ 20 transmission. 14 hole wheels. Tires Sawmill are 30.5’sExchange at 55% and.................. one at 80%.11

CenterSawmill has very......................... little slack. This19 Select skidder has been a back up skidder Smith Sawmill ...........................

4 for the several years. Skidder has The Paul Bunyan Show ......... 39 12000 hours. Item ID 13805. Sam Thomas Industrial Controls..... 10 x702

Union Grove Saw .. 2, 37 1981 Timberjack 520&- Knife Very hard to come by! 653 Detroit.

Runs Great!.

Universal Refiner ...................

23 Item ID 13741.

Sam x702 WoodMizer ................................ l

2002 Timberjack 608s with hot saw

‘14 Komatsu WA200 Loader

BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers

that go up and down, with airbags, 19 it includes two sets of Mcdonough

44

pressure guides. Top Casting wheel Item is supported on both sides. This is an extremely accurate machine

Con Ph:

in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal

58 with onboard log turners, carriage Ch Carriage line it includes carriage

drive, hyd pac for carriage, sawyers cab, computer controls,

‘88 440Dfor cabinet with Deere electronic drives ‘14John Hurdle 3-Hd carriage knees, husk including Skidder Block Sawmill Item ID: 13781 48" bottom saw and 36" top saw Item ID:Sam 13997 Contact: Contact: Austin x702 Ph: (888) 401-6367 Ph: (888) 401-6367 x703

Item Con Ph:

Rema

Equip

Speed

STACKING ‘05 RAC

in very good shape and has been well maintained. Item ID 12194.

Sam x702

‘98 Timberjack 1270B - 7,300 hrs.

Perkins 6 Cylinder Engine. All

modules and computer are brand new. Tires on average are around 80% Video: http://youtu.be/R_

MQZe5QEFw. Item ID 13572. Chris x700 Firewood Proc.

VALMET Item ID: 13865 Contact: Sam 1998 Valmet 603 3-Wheeled www.BakerProducts.net Ph:800.S48.6914 (888) 401-6367 I S73.663.7711 Buncher - 6500 hours onx702 total

40% c

mach

main Item

Hard Con

ofPh: co

avail Item 2005

Forw

hydr

box i

2012.

‘99 cond 51

pump

machine but no hours on 4BT3.9 hour. ❘ L!  (888) 401-MENS NO. 19 Item Con boom loader, 3 knife disc, Newer Lumbermens  since 1986 ❘  List  seLL  exch Ph:

- Approx. 6000 hours, Machine is  SELL YOUR EQUIPMENT TODAY ❘  24/7 SUPPORT l§ 0  Issue 364

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

One Owner, low hours!

Phone 315.284.4126 FaxConverter, no clutch, New TJ 460D 315.849.2045 Center pins are re-done, cradle pins/bushings, One is Website tight, no play, Owner www.empirehyd.com redid loose one on the main grapple, the top ofUnder the Pressure” motor, becauseEmailGrapple is rebuilt, Tires size: “Precision info@empirehyd.com

he had to do a crank seal, Winch works, but needs a cable (broke last winter), Transmission re-done by private mechanic by previous owner, right before current owner bought it, Inside cab is clean, all controls work, A/C works, heat, too, Center section pins re-done, just like new, Tires size: 30.5’s, Tires tread: 70-80% all around, with chains coming with it, Bushings in the grapple are re-done, Motor re-done at 10000hrs by previous owner, about 4yrs ago. Owned for 3 yrs. He bought it off of a friend that quit logging, About 90mi south of Syracuse, NY Item ID 3286. Joe x709

30.5×32, Clark transmission, 3 gears, Clark winch, Owner has the doors for it, Owner is in NO HURRY to sell, will only sell for $44K, nothing less, About 130mi east of Pittsburgh, PA Item ID 3233. Joe x709

02′ CAT 525B Approx.

4000hrs ago transmission, and engine were re-done right before current owner bought it 2yrs ago. No winch, Center pins have a lil’ wear, but can pull just fine as it is. Owner will include brand new center pins and all needed parts he bought to get them changed, but never got around to do it, Tires size: 30.5, Tires tread: 13428 // PO Box 124 50% all around, always been CLARKVictory F666 Ln. RANGER Adams Center, 13606 used with chains, Tire chains This machine is asNYGOOD and as TIGHT as they come don’t come with it. Owner for being an old Clark, It’s a put them on his new skidder, new Cummins engine, Heater Inside cab, all controls, Seat in works, A/C doesn’t, Torque functions work.

great shape still, Heat works, A/C works but doesn’t blow too cold, maybe needs a recharge, Owner upgraded to a CAT C series, doesn’t need this anymore, He’s had no issues the time he’s had ‘16everything Halverson it, elseH140 works as it should, (DEMO) Been parked Skidsteer since May, Everything else Item ID: JW-909632 works and operates as it Contact: J Williams should, About 150mix701 north of Ph: (888) 401-6367 Boston, MA Item ID 3214. Joe x709 00′ JD 748G III Hours Meter Reading: 16000 +/-, New bearings, Main boom bushings re-done, It has a brand new A/C unit in it, Tires size:35’s, Tires tread: approx. 50-60% all around, Center pins have a lil’ play, ‘13 KMC 2500 Track but not bad, Motor is strong, Skidder no blow-by, Transmission needs clutch packs for 1st Item ID: 14078 and 2nd Austin gear (5-10K fix).

Contact: Machine move, but won’t Ph: (888)will 401-6367 x703 pull a log in 1st & 2nd gear.

All other gears work smooth.

Owner anymore, off onto adoesn’t conveyor.log This is a very and sees no need of fixing

well built processor. Item ID 13820.

Sam x702

IntegrIty • PrecIsIon • QualIty • Value ‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

Woodmaster

‘83 John Deere 4850

chain conveyer, 8 way splitter, on

Item ID: 14073 See why we are your BeSt Source for bandsaw blades!

20,000lb goose neck trailer. Item ID Contact: Austin We offer the highest quality welds ourx703 people use the 13916.and Austin Ph: (888) 401-6367 x703

highest level of integrity and precision give you best Best Valueto Portable Logthe Splitter bandsaw the business—we ship all overinthe with 1700 hours,blades in veryin good - Small manufacturer PAUS. has Satisfaction guaranteed! condition. Easily produces high always made the best valued log splitter. quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

Handles logs up to 32”. Uses

13HP Honda motor. Manual start

thIn Kerf

but electronic option is available.

Band saw Blades

Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702

Ask About Our Dismanteling Blades homemade processor with a 10’ Firewood Processor - This is a

log deck. Has a hydraulic grapple, chain and kicker that all runs off

- It has a 353 Detroit diesel, 40 of a 4 cylinder Mercedes power ck tooth circle saw, 30 foot e h inch insert Has a 4’ chain saw Price that kicks C ut Our Quality • Our unit.

Service • Our O

1-888-857-5153

 Issue 364 430

Lumbermens™  since 1986

❘

Firewood Processor - This is a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT Wood-Mizer LT40

BANDIT Item ID: 13995 1999 Bandit 1900 Tracked Disc Contact: Austin Ph: (888) 401-6367 x703 at Chipper - Cat Under Carriage 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

good condition. Just finished 10

Acre clearing job, ready to work!

Remote control. Big production

‘89 Timberjack 380A

 List  seLL  exchange  buy  save

Item ID: 14039 Contact: Austin

it, Owner bought it from a friend who owned it for 5yrs.

He has had it for 2yrs now, no issues, just maintained it and put $10,000+ in it without much use. About 30-35mi ‘93ofBarko east Gainsville,180B FL Item ItemID: ID14077 3210. Joe x709 Contact: Austin Ph: (888) 15′401-6367 CAT 525Dx703 Frame hrs: less than 13000, New motor put in at 10K hrs.

Private mechanic installed it. Can provide invoices of work done, Dual arch, No winch, A/C and heat both work fine, Center section pins done in 2020, Tires tread: 50%, Tire chains come with it, ‘95 Johnwas Deere C6by Transmission re-done CAT, when CAT started redoing Tree Farmer theItem D models, couple years ID: 13920 ago, Owner is getti Contact: Austin ng out of logging, Owner will throw one Ph: (888) 401-6367 x703 brand new spare tire with sale, Everything works as it should, Owner is selling his logging capacity!. Item IDbeing 13421. aSam x702 equipment after logger BARKO for 40 yrs., About 250mi north of Albany, 1994 BarkoNY 160B - Electric Item ID 3172.

Joe x709 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. x702 84/85 JohnSam Deere 1999 Barko 160D - new engine with 440B/C approximately 1500 hours. Hour

Item ID: 13908 meter dont work. The last 2 owners Contact: Sam have(888) only 401-6367 used it to load trucks or Ph: x702 as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

1990 Bell Super T - ThisT Bell has ‘90 Bell Super

a brand Duetz engine. Lever Item ID:new 13896 Contact: control, 33”Sam bar, pump and tranny Ph: (888) 401-6367 x702 ❘

 LumbermensCO.com

John Deere Dual Arch Grapple,

98′ JOHN DEERE 648 98ʹ Model John Deere 648 skidder in good condition, has new transmission in it with less than 500 hours on it, engine has been rebuilt in the past, and doesn’t have any blow by or leak any oil. It could use a The for Tree new rotator the grapple. thatthat, Started Other than all of the pins and bushings it are All!tight, and the skidder is ready for the woods.

Since 1986, Lumbermens has Item ID 2798.

Austin x703

published a monthly circular reaching sawmills, loggers, 04′ JOHN DEERE 648G3 pallet makers, recyclers and John Deere 648G3 grapple industrial woodworking plants skidder with winch, skidder has worldwide.

around 15K frame hours, but has been well PUBLISHER maintained. John Deere Woods Publishing just put in new transmission with 400 ADVERTISING hours on it, theSALES motor was Woods rebuilt aMorris few years ago. Skidder (888) 401-6367 ext. 704 doesn’t use any oil in between morris@lumbermens.co oil changes. Cab has heat/air. Call for MARKETING more info. DIRECTOR John Williams Item ID 2791.

Austin x703 (888) 401-6367 ext. 701 j@lumbermens.co

12′ TIGERCAT 620D 2012DESIGN ModelDIRECTOR Tigercat 620D Heninger grappleDonna skidder with winch, has REPS 11800EQUIPMENT frame hours, with new Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

** CALENDAR**

engine installed less than 2000 ac, pins and bushings are hours ago. Strong skidder, all allWOODSMEN'S tight, strong FIELD engine,DAYS and NY STATE components work like they Everything works Fri, 18 transmission.

August - Sun, 20 August should. Only selling to upgrade Boonville, as it should.New CallYork for more info. to brand new skidder. www.starwebhosting.net/woodsmen/ Item ID 2628. Austin x703 Item ID 2753. Austin x703 83′PRODUCTS TJ 380A SOUTHWEST FOREST EXPO 04′ TIMBERJACK 460DFri, 25New winch drive -New August - Sat, 26 shaft August 2004 Timberjack 460D grapple Hot injecti on pump Springs, Arkansas-Bushings skidder has new JD 6068 motor www.arkloggers.com replaced in spring 2020 -Tiny installed with only 800 hours on slop in the center section -New 72NDglass ANNUAL LAKES it. Frame has right aroud 15000 in the GREAT cab -Motor is from HEAVY hours, pins and bushingsLOGGING are all a&93’ dodgeEQUIPMENT pick-up truckEXPO with Sept installed - Sat, 9 Sept tight, doesn’t burn any oil. AllThurs, low 7hours in summer Michigan 4 30.5 tires come with chains. Escanaba, 2019 -Owner ran it two Call for more info. seasons, then bought a bigger MID-ATLANTIC & BIOMASS skidderLOGGING in 2020 -New cylinders Item ID 2724. Austin x703 -4 Sept speed clark Fri, for 15 the Septgrapple, - Sat, 16 powershift size: 24.5 x 2013 JOHN DEERE 848H Selma, North-Tires Carolina 32, -Owner will put a brand new 2013 model John Deere 848H www.midatlantic-logging-biomass­ MID-ATLANTIC on before sale -4 chains LOGGING & BIOMASS with 9400 hoursEXPO on it, cab has tire expo.com/ heat/ac, has a reman motor in come with sale -2yrs owner WOOD -Owner went prettEXPO y much thru it with less than 1500 hours on KENTUCKY 15 Sept - Sat, 16 Sept machine is at work it, all around it is a tight skidder.Fri, everything, Lexington, Kentucky everyday right now. It’s ready to Call for more info. http://www.kfia.org/ go make $$$$ elsewhere Item ID 2646. Austin x703 KentuckyWoodExpo.aspx Item ID 2133. Joe x709 2004 JOHN DEERE 648G3 SHOW 13′ CAT 545C 2004 John Deere 648G3THE PAUL BUNYAN Fri, 6 Oct Sun, 8 Oct Tires size: 35.5’s -A/C works dual arch skidder with 6800 Cambridge, got newOhio injectors, too orginal hours, cab has heat/ -It’s www.ohioforest.org

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS -Center Section is good -Blade fine -Enclosed cab See is pictures, prices, and -Tight machine.

Everythingat Location of all equipment works as it should -Reason www.LumberMB\ISmagazine.com for selling: owner is a Tigercat fellow. Wanted to try CAT and BANDMILLS compare.

He’s & stiHEADSAWS cking with Danckaert Band Tigercat, this canResaw go - Roughly Joe x709 10 Item hoursID on2117. this machine since it has been rebuilt, it has a 24foot in

10′ JOHN DEERE 648H feed deck 20 foot out feed deck 2010 model John Deere 648H with 44 inch wheels, and all the -Torque Converter machine bells 7500 and whistles, a production -Has frame its hours -New 210 HP with engine installed at machine, air strain conveyers 5000 hours -Good Rubber that go up and down, with airbags, -New windows -Cold AC it includes operator two sets of Mcdonough -Owner machine pressure guides.

Top Casting wheel -Working daily Call for more info. is supported on both sides. This ID 1847.accurate Austin machine x703 isItem an extremely in ve1y good condition, Cuts 130

TIMBERJACK 460 feet a minute also CLT presses.

Timberjack 460has has 5,9 Item ID 13876. cummins, 3 Austin speedx703trans, esco S & Wgrapple, 125 Band strong Mill withwinch, dry skiddergenerator doesn’t -burn oil..

Caterpillar Low hours Working daily, video available on the mill, electronic computer Set if interested. works,1 or 2" band, 22ft. track Item ID1/2" 1777.

Austi n x703 Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

ROW ELECTRICAL EQUIPMENT, INC.

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS POSTMASTER

Carriages (Sawmill) - Cardinal

YOUR SOURCE FOR USED, RECONDITIONED: Carriage line it includes carriage

MAILING ADDRESS

May be sent to­ morris@lumbermens.co

2010 Cardinal HD Carriage

B&• B Squirrel Mfg. ...............................

M&F Gauge .............................

Cage Motors 18• DC Motors - Crane and Mill •28Transformers, Three-Phase with onboard log turners, carriage • Gear Motors • Adjustable Speed Drives • Across/Line Magnetic Starters B. H. Payne .............................. 16 Meadows Mill, Inc. ................ 33 drive, hyd pac for carriage, • Wound-Rotor Motors • Generators - AC and DC • Reduced Voltage Starters Menominee SawSets .....................•29Safetysawyers Baker ......................................

• Synchronous Motors 5, 7• Engine-Generator Switches cab, computer controls, • DC Motors • Transformers, Single Phase • Phase cabinet Convertors with electronic drives for Bell's Machining ..................... 27 Metal Detector's Inc. .............. 30 P.O. Box 2812 • Toledo, Ohio 43606 carriage knees, husk including Brute Force Mfg. ..................... 31 Midwest Sharpening.............. 26

Fax to:

419-244-8887

WWW.RoWELECTRiCAL.CoM

800-248-4479 48" bottom saw and 36" top saw

Buck Equipment (AIM) ........ 36 Morbark ..................................... 9 419-248-4479 Send address changes to: rowelec@glasscity.net sales@rowelectrical.com Lumberman's Exchange Corley MfgPHONE ..............................

32 Multitek ...................................

WE ANSWER THE 24 HOURS • WE BUY USED 12ELECTRICAL P.O. Box 1916 Columbia, TN 38402 CRD Metalworks .................... 25 Piper's Saw Shop.................... 13 The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity Bell and space.Ultra AlthoughTallon efforts have been made to ensure accuracy of Tracks content by advertisers Itemsubmitted ID: 14023 and writers, theSam Lumberman's Contact: Exchange, its principles andx702 Ph: (888) 401-6367 associates, are not held liable for errors or omissions. Reproduction, with winch, direct drive. Comes in whole or part, is prohibited with­ with 6000 hour extended warranty. out written consent.

Has only 2600 hours. Has new ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

BANDSAW

BLADES

All Sizes Available!

TOP PERFORMING, economical blades for all primary &

secondary wood processing.

Welded toExchange your lengths! .................. 11 Dyna Products ........................

35 Sawmill We also offer expert sharpening services, plus...

Gang • Edger • Scragg • TrimSawmill • Split • Strob Empire Hydraulics ...................

8 Select ......................... 19 ....and just about any Custom Saws you need to keep longer...

Great Lakes Mfg. ....................

34you cutting Smith Sawmill ........................... 4 for less. Ask about FREE Shipping!

‘16 Halverson H140 ‘05 CAT TK560 Skidsteer Item ID: 14004Show ......... 39 Paul Bunyan Hahn Machinery ...................... 3 The Item ID: JW-192810 Contact: Sam

Contact: J Williams Hurst Boiler ............................. 14

Thomas Industrial Controls ..... 10 Ph: (888) 401-6367 x702

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw 22 does great job ............................. in hardwood. Priced

Universal RefinerSwing ...................

Skidder w/ESCO Boom 23

Ph: (888) 401-6367 x701

1977 (est) FMC 220CA Tracked

to sell!. Item ID 12206. Sam x702 Grapple - Good running condition.

Lignomat .................................

24 WoodMizer Call Marvin Miller for a quote ................................ l John Deere 20 hole Sweda wheels Front blade. Detroit 6V53 engine.

231-924-5953 (fax) 231-924-6166 / 11606 Brickyard Road • Holton, MI 49425

30.5 X 32 26 ply on rear and 70%

©2019 Wood-Mizer LLC

- These 50’s are mounted on hard

No winch....they cannot fit with

priced to sell. Item ID 13696. Sam

rims. Still 50% tread left on these

tracks at 70%. Item ID 13227. Sam

front.

Still a newEQUIPMENT skidder and FOR SALE to find 20 John Deere swing boom ❘grapple.

Military style FORESTRY ❘ hole  SELL YOURsweda EQUIPMENT  24/7 SUPPORT -on USED l§ TODAY 0 x702

tires. 4 available. Item ID 13852.

x702

STACKING RAC

Sanborn Scragg Mill Item ID: 14050 Contact: Austin Woods (888) 401-6367 Ext. 606 13910. Austin x703

Franklin 170 Skidder - This would be a great starter skidder. It is

www.BakerProducts.net

a single arch withI winch.

Runs 800.S48.6914 S73.663.7711

good and pulls good. Detroit 453

turbo 3 speed power shiftNO. 21 ❘ L!  and 401-MENS (888) transmission. Good center section.

There are a few leaks, but nothing

Phone 315.284.4126 Fax TIMBERJACK 240A CAT 515 GRAPPLE SKIDDER 315.849.2045 1998 CAT 515 single arch Website 1992 model Timberjack www.empirehyd.com 240A Grapple Skidder. New center all“Precision original factory madeEmailpins last year, had a new AC Under Pressure” info@empirehyd.com

grapple skidder, hour meter shows 2800 hours, but has rolled over, so around 12800 original frame hours. runs great, tight pins and bushings, no leaks, strong gearmatic winch that has been all rebuilt.

Working daily.

Item ID 1769. Austin x703

pump put in not too long ago…

Grapple works good with no issues, cable works good too.

Ready to hit the woods! call for more info.

Item ID 1509.

Ervin (641) 229-1012

TIGERCAT 630E 2017 Tigercat 630E with 2400 hours on it, in excellent condition. Everything works as it should. Call for more pictures.

Item ID 1098. Austin x703

CAT 515 2000 model Cat 515 skidder with winch It will include a professionally made arch, so that one could use it as a cable machine if wanted. It currently sits right at 5900 original frame 15′ CAT 559C LOADER hours. Tire size 28L and the Comes with both delimber front two tires are going to be and slasher saw, as seen in replaced with brand new ones the pictures, Machine is still before purchase. Inside the cab at a job -site right now, Been has good heat/ac and all good serviced regularly by Louisiana 13428 Ln. // Box 124 glass.

ThisVictory skidder hasPObeen CAT. Dry machine no leaks, Adams maintained, Center, NY 13606 meticulously and Joystick controls, Everything every component works like it works as it should, all inside should. Call for more info. controls respond as they ‘06 Brewco B1600 cab Item ID 1739. Austin x703 should, One owner only and he Resaw is now downgrading, Will have Item ID: 13862 Contact: Sam When You 401-6367 Buy Yourx702 Circular Saws From B.H. Payne Ph: (888)

‘05 Woodmizer ‘05LT300 Gehl CTL 70

You’ve Bought the best... We Guarantee It!

Item ID: JW-986495 Item ID: 14031 Traditional Quality Combined Contact: J Williams Contact: Austin With Todays Technology Ph: (888) 401-6367 x701

Ph: (888) 401-6367 x703 ‘83 John Deere Call 800 752-0627 Circular Saws 4850 Make Sure To Ask For Our Free, Complete Saw Catalog Saw Bits and Shanks Quality Brand Reg. U.S. Pat Off

chain conveyer, 8 way splitter, on Circular Knives We Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth Item ID: 14073 Carbide Tipped Saws 20,000lb goose neck trailer.

Item ID Contact: Austin Carbide Strobe ® Saws Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also x703Diamond Wheels, Payne 401-6367 & Company Stock & Sell Bits & 13916.

Shanks, Austin Carbide Tips, Ph:B.H. (888) x703 Saw Manufacturers John Deere Knife548G2 Grinding Wheels, Gumming Wheels & Knives.

BestSaw Value Portable Log Splitter Item ID: in 14042 withHere’s 1700 hours, very - Small in PA has What You Get good With Every B.H. Paynemanufacturer Saw Contact: Austin condition.

Easily produces madeQuality the best valued logSteel. splitter.

• Saws fromhigh only the Highest Nickel Alloy Ph:manufactured (888) 401-6367 x703 ‘14 B66TD • Each Saw Milled with State-Of-The-Art Precision CNC Milling Machine. quality chips with patented ‘Cone’ Handles logs up to 32”. Uses • We Tension Your Sawload to Your RPM Speed BEFORE Leaving Our Factory. drum design.

Can easily 42’ 13HPRotochopper Honda motor.

Manual start - 3410 hours. $32,000 in recent • Your Satisfaction - Completely Guaranteed.

Item ID: 13838 vans and produce 6 8 loads per but electronic option is available. upgrades and repairs. Fecon Contact: Sam day. Item ID 13882.

Austin x703 BH250 Mulching Head.

Item ID Has Log Lift. Uses 4-way wedge (888) 401-6367 Ext. 603 B.H.EDGERS Payne &&Company, Inc. GANGS adjustable to single two way. Great 13502. Sam x702

P.O. Saws Box 90608 Brewco2011 - Two620D Brewco Saws Value! PA. Item ID 12062. Sam x702 Tigercat - This is a East Point, GA 30364 in excellent condition.

Runs great.

Processor - This Item ID 13408. Sam x702is a hour skidder with only 5500 Firewood 404low 761-8711 Item IDhours 13644.

Sam x702 homemade processor with a 10’ 2014 Tigercat 630D Grapple a cummins engine and Fax 404on 761-5398

more pics and videos avail for serious inquiries, Delivery available as well. Buyer pays for trucking, In the Alexandria, LA area Item ID 5534. Joe x709

‘16 H140 04′Halverson TIMBERJACK 460D New injector pump, Joystick Skidsteer (DEMO)

controls, owner hasn’t Item ID:Current JW-909632 used delimber.

Fellow he Contact: J Williams bought the laoder Ph: (888) 401-6367from x701 said delimber was disconnected, but he has’t looked into it because he has never used it. As far as he knows, it should work, Loader is at work still right now, Owner has upgraded his equipment,

why selling, Delivery available as well.

Buyer pays for trucking, About 140mi east of Springfield, MO Item ID 5445. Joe x709

‘93 Barko 180B 17′ JD 437E

Item ID: 14077 Comes with delimber only, Austin noContact: bucksaw, Machine is in Ph: (888) 401-6367 good conditi on and x703 at work everyday. Owner is getting rid of it, because he can’t keep his personnel employed, getting out of logging, Have a reliable trucker available. Buyer pays for trucking, About it and 70mi north of Jackson, MS Item ID 4809. Joe x709

‘95 John Deere C6 Tree Farmer

Item ID: 13920 Every Reputable Wide Band Contact: Austin

‘13 KMC 2500 Track Supplier Offers Skidder

Ph: (888) 401-6367 x703

3 High Quality Swedish Steel

Item ID: 14078 3 3” – 8” Band Width Contact: Austin capacity!. Item ID 13421. Sam x702 3 16 to 20 Gage Ph: (888) 401-6367 x703

BARKO 3 Double Cut Options 1994 Barko 160B - Electric 3 Choice of Swage or knuckleboom, Stellite 30' boom, 75hp off onto a conveyor. This is a very

WOLVERINE

well built processor. Item ID 13820.

motor, Rotobec continuous

a Chomper Model 16 PDA

13238. Chris x700

BUT ONLY THE grapple, 5,000 original hours.

Firewood - This is (excellent condition.). Item ID BYProcessor MENOMINEE SAW GUARANTEES Sam x702

• Cutting Edge Plasma Welds 1995 Barko 775 B Feller Buncher • The Industry’s Capacity with John Deere power unit Highest with - Band Pumps Saw recently redone. 400 hrs low hours.

Control panel includes on injection pump. always started • Quick Delivery from our HUGE Inventory 14’ Pusher tach, oil pressure, water temp and good.Snow in good working order. 22in • Fast Sharpening & Exchange Program Item ID: JW-492406 amp gauges.

Cuts logs up to 16”. kohing head. head works ‘11 Doosan DL200 to Keep YOU Running Contact: J Williams great.

One owner and comes with all Item ID 13185. Sam x702 Item•ID: JW-113876 Pricing Ph: (888) 401-6367 x701 Competitive manuals and receipts. Purchased 1999 Barko 160D - new engine with automatice firewood processor

Contact: J Williams

Ph:for (888) 401-6367 new $32,500.

Item IDx701 13865. approximately 1500 hours. Hour And ONLY Menominee Gives You Everything Sam x702

work.

The last 2 owners You need in a Wide meter Banddont Saw – Plus LOGGING EQUIPMENT have only used it to load trucks or Expert Service from the Industry’s Most BANDITKnowledgeable as a backup as needed. Has a CTR Staff.

1999 Bandit 1900 Tracked Disc

delimber, grapple has been rebuilt.

GotCarriage a Wide Problem?

Chipper - Cat Under at Band Boom cylinders have minor leaks.

Call475Menominee Today andSam You’ll 50% or better. hp Cummins SawItem ID 13694. x702

‘04 Fabtek 344Bvalue Whyowner.

More Mills Trust the Pro! Diesel. 7500Learn Hours. One 94 Barko 275 - Excellent

Item ID: JW-093430 with low at hours at 3,500. 5.9 ‘05 Transport Contact: J Williams Sam x702 CUMMINS continuous grapple.

Trailers Custom FREE Ph:TOLL (888) 401-6367 x701 2004 Bandit Beast Model 4680 Runs Great!. Item ID 13740. Sam Log Pup 1-800-582-0470 Well maintained. Item ID 13294.

3412 Caterpillar Diesel engine

x702

Item ID: JW-538174 Processor - This is a Chomper FIREWOOD PROCESSORS Has a hydraulic grapple, 850 HP. 5300 MillSt., in Menominee, MI 49858 BELL 900hrs.

16th Skidder - Dual Arch Grapple.

Just with a fire suppression system. Comes log deck.

Contact: J Williams super 14, with a 60hp engine. In 2010“Since Shop Built Wood Processor chain and kicker that all runs off good condition.

Just finished 10 1990 Bell Super T - This Bell has Tel: 906-863-2609 Fax: 906-863-1147 1990 hours.

3 year/5000 hour PT mounted on 35.5 tires at 50% back Ph: (888) 401-6367 x701 1890” - It hasand a 353 Detroit diesel, 40 chains onof a 4warranty. cylinder35.5 Mercedes power tires with dualing 40% front and good

inchE-mail: insert circle 30 foot Has chain saw that Winch. kicks 60%.

Wide blade. all 4 tooth tires.

Has thesaw, bigger 630 axlesunit. info@paynesaws.com Webrings Site:aat4’ www.paynesaws.com

very nice shape. Only 171 hours, Email: info@menomineesaw.com Acre clearing job, ready to work! a brand new Duetz engine. Lever comes with green chain conveyer.

Remote control. Big production control, 33” bar, pump and tranny All of the manuals for the engine, Waratah 624 Super - New

WWW.MENOMINEESAW.COM

and no winch. Center pins are tight Item ID 13526. Sam x702 Computer for head (Logrite).  Issue Lumbermens  since2015 1986 ❘ 234B 430 Loader List - Model seLL  exchange grapple buy w/save roatation on the a Tigercat and 364 extra fuel tank. Item ID™13929.

10500 hours. New main pump 30’ reach on the boom. Joystick 234B. Only 300 hours on this Sam x702

and ❘the chopper itself come with  LumbermensCO.com 2006 Tigercat 630C Grapple it, as well as all of the electrical Skidder - Very good running

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

SAFETY ALERT

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

Truck Driver Hurt by Improperly Secured Load Boonville, New York www.starwebhosting.net/woodsmen/

BANDMILLS & HEADSAWS SOUTHWEST FOREST PRODUCTS EXPO BACKGROUND Danckaert Band Resaw - Roughly Fri, 25 August Sat, 26 August On a The winter afternoon in the Tree 10 hours on this machine since it Hot Springs, Arkansas Southeast, a truck driver arthat Started www.arkloggers.com has been rebuilt, it has a 24foot in rived at a itreload All! yard to transfer feed deck 20 foot out feed deck 72ND ANNUAL GREAT LAKES a load of crossties onto rail cars with 44 inch wheels, and all the Since 1986, Lumbermens has LOGGING & HEAVY EQUIPMENT EXPO for transport to a circular treatment facilpublished a monthly Thurs, 7 Sept - Sat, 9 Sept bells and whistles, its a production reaching sawmills, loggers, ity. The crossties were processed Escanaba, Michigan machine, with air strain conveyers pallet makers, recyclers and from mixed hardwood logs and that go up and down, with airbags, industrial woodworking plants MID-ATLANTIC LOGGING & BIOMASS worldwide. were approximately 8 feet, 6 it includes two sets of Mcdonough Fri, 15 Sept - Sat, 16 Sept PUBLISHER inches long by 7-8 inches width. pressure guides. Top Casting wheel Selma, North Carolina Woods Publishing www.midatlantic-logging-biomass­ is supported on both sides. This Each crosstie bundle was stacked MID-ATLANTIC ADVERTISING SALES expo.com/ LOGGING & BIOMASS EXPO is an extremely accurate machine five wide and four high.

Weather Morris Woods in ve1y (888) 401-6367 ext.

704 was not a determining factor. The driver had served less than one yearWOOD in his EXPO position at the time ofgood the condition, accident.Cuts 130 KENTUCKY morris@lumbermens.co

MARKETING DIRECTOR

Fri, 15 Sept - Sat, 16 Sept

feet a minute also has CLT presses.

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

on the mill, electronic computer Set

Item ID 13876. Austin x703 Lexington, Kentucky UNSAFE ACTS AND CONDITIONS John Williams http://www.kfia.org/ S & W 125 Band Mill with (888)driver 401-6367 ext. 701 The ignored existing safety protocols for unbinding cargo and failed to recognize that the pack strapping was KentuckyWoodExpo.aspx Caterpillar generator - Low hours j@lumbermens.co loose, thereby creating a fall hazard during the unloading process.

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

ACCIDENT Cat 3406 140KW Genset, 12,400 Cambridge, Ohio EQUIPMENT REPS The driver began to unbind his fully loaded trailer of crossties, beginning with the binding straps at the front of the Sam Wall www.ohioforest.org hours ready to run. Item ID 13434.

(888) 401-6367 ext.

702 trailer. The driver failed to notice that a polyester strap (¾-inch wide), which initially bound thex702 top pack of crossties Sam sam@lumbermens.co to the pack underneath, was no longer in place. The reload yard operator typically loaded and unloaded trucks, and the CARRIAGES & DRIVES Austin Woods company alwaysext. adhered to a safety practice of putting the forklift between the load and the driver during the 2010truck Cardinal HD Carriage (888) 401-6367 703 austin@lumbermens.co unbinding process.

Carriages (Sawmill) - Cardinal it includes carriage AsMAILING the yardADDRESS operator exited his office heading toward the loaded truck, he heard crosstiesCarriage fallinglinefrom the far side B & B Mfg. ............................... 18 M&F Gauge ............................. 28 P.O. Box 1916 with onboard log turners, carriage ofColumbia, the truckTNand hitting the pavement.

He heard the driver yell and found him lying on the pavement underneath three 38402-1916 B. H. Payne .............................. 16 Meadows Mill, Inc. ................ 33 hydwas pac for carriage, and (888) 401-6367 crossties: one across his head, one across his chest, and the third across his waist. The injureddrive, driver conscious Menominee Saw .....................

29 Baker ......................................

5, 7 sawyers cab, computer controls, alert. AD SUBMISSIONS May be sent to­ with electronic drivesthe for Metal 911.

Detector's . .............. 30EMScabinet Bell's Machining .....................

27 called The yard operator was able to remove the crossties and The Inc responding personnel transported morris@lumbermens.co carriage knees, husk including Brute . .....................transferred 31 Midwest .............. 26 injuredPOSTMASTER driver to a local hospital.

HeForce was Mfg subsequently toSharpening a larger regional hospital for further treatment.

48" bottom saw and 36" top saw Buck ........camera 36 Morvideo bark .....................................

Send address changes to: A post-accident investigation andEquipment review of(AIM) security footage revealed 9that all packs of crossties had a Lumberman's Exchange polyester strap completely around them they were 32 initially loaded on the trailer. 12 It was theorized that the crossties Corley Mfgwhen ..............................

Multitek ...................................

P.O. Box 1916 may Columbia, have shifted during the loading process, causing the25polyester to become loose.

TN 38402 Piper's strap Saw Shop ....................

13 Vibrations and wind pressure CRD Metalworks .................... while traveling at highway speeds likely exacerbated the problem, eventually pulling the polyester strapping from the The Lumberman's Exchange is CW Mill-ArmorHog .............. 17 Rotochopper............................ 40 published monthly by Woods buckles.

** INFO LINK**

STACKING RAC

CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 Publishing, P.O. Box 1916, Columbia, TN 38402. All rights Dyna Products ........................ 35 Sawmill Exchange .................. 11 reserved.

All editorial/ advertorial INJURY submissions are used at the Empire Hydraulics ................... 8 Select Sawmill ......................... 19 The driver suffered internal and external injuries and was hospitalized for an extended period of time in indiscretion of the publisher and multiple may be edited for purposes of clarity Great Lakes Mfg. .................... 34 Smith Sawmill ........................... 4 tensive care. and space. Although all efforts have Hahn Machinery ...................... 3 The Paul Bunyan Show ......... 39 been made to ensure accuracy of content submitted by advertisers Hurst Boiler ............................. 14 Thomas Industrial Controls..... 10 RECOMMENDATIONS FOR CORRECTION and writers, the Lumberman's Exchange, its principles and • Always follow existing safetyIron protocols to avoid injury21while unbinding a& load.

Bull ...................................

Union Grove Saw Knife.. 2, 37 associates, are not held liable for • Always checkReproduction, for loose binding straps and perform a visual inspection to see if cargo23has shifted during transport. errors or omissions.

Kilgore Saw .............................

22 Universal Refiner ................... in whole or part, is prohibited with­ • Double strap bundles and tie a knot to prevent polyester straps from backing out of buckles. www.BakerProducts.net Lignomat ................................. 24 WoodMizer ................................ l out written consent.

800.S48.6914 I S73.663.7711 ©2017 Woods Publishing - USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

❘

 (888) 401-MENS L!

NO. 23

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

FUNNY TIMES

I Cannot Shop at Costco Anymore “Precision Under Pressure”

Yesterday I was at Costco buying a large bag of Purina dog chow for my loyal pet, Wonder ‘93 Necco, Barkothe 180B ‘16 Halverson H140 Item ID: 14077 Dog, which weighs 191 lbs. I was in the check-out line when a woman behind me asked if I had a dog.

Contact: Austin Skidsteer (DEMO) What did she think I had, an elephant? So because I'm retired and have little to do, impulse I told Ph:on (888) 401-6367 x703her Item ID: JW-909632 that no, I didn't have a dog, I was starting the Purina Diet again.J Williams I added that I probably shouldn't, because Contact: Ph: (888) 401-6367 x701 I ended up in the hospital last time, but that I'd lost 50 pounds before I awakened in an intensive care ward with tubes coming out of most of my orifices and IVs in both arms.

I told her that it was essentially a Perfect Diet and that the way that it works is, to load your jacket pockets with Purina Nuggets and simply eat one or two every time you feel hungry.

The food is nutritionally complete so it works well and I was going to try it again. (I have to mention ‘95 John Deere C6 here that practically everyone in line was now enthralled with my story.) Horrified, she Farmer asked if I ended Tree up in intensive care, because the dog food poisoned me. I told her no, I stopped toItem Pee ID: on 13920 a Fire Hydrant Contact: Austin ‘13 KMC 2500 Track and a car hit me.

Ph: (888) 401-6367 x703 Skidder I thought the guy behind her was going to have a heart attack he was laughing so hard!!

Item ID: 14078 Costco won'tLn.let meBox shop whatAustin you ask retired people, they have all the 13428 Victory // PO 124 there anymore. Better watch Contact: capacity!. Item ID 13421. Sam x702 Adams Center, NY 13606 Ph: (888) 401-6367 x703 time in the World to think of crazy things to say.

BARKO INDUSTRYoffNEWS onto a conveyor. This is a very

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp

Rotochopper Plans for Future with Building Expansion well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID

Rotochopper, Inc. is embarking a Chomper Model 16 PDA 13238. Chris x700 ‘05 Gehl CTL 70 automatice firewood processor 1995 Barko 775 B Feller Buncher on a significant building expansion Item ID: JW-986495 with John Deere power unit with - Pumps recently redone. 400 hrs project to enhance its production Contact: J Williams low hours. Control panel includes on injection pump. always started Ph: (888) 401-6367 x701 capabilities and meet the increasing tach, oil pressure, water temp and good. in good working order. 22in ‘83 John Deere demands of its valued customers. amp gauges. Cuts logs up to 16”. kohing head. head works great.

4850 One owner and comes with all Item ID 13185. Sam x702 chainis conveyer, 8 way splitter, on The expansion project a Item ID: 14073 20,000lb goose neck trailer.

Item ID manuals and receipts.

Purchased 1999 Barko 160D - new engine with Contact: Austin to testament Rotochopper's 13916. Austin x703 new for $32,500. Item ID 13865. approximately 1500 hours. Hour Ph: (888) 401-6367 x703 unwavering commitment to Sam x702 Best Value Portable Log Splitter meter dont work. The last 2 owners excellence andgooddedication to with 1700 hours, in very - Small manufacturer in PA has LOGGING EQUIPMENT have only used it to load trucks or providing to the company. BANDIT As a part of this asinitiative, Rotochopper condition.

Easilyhigh-quality produces high equipment, made the bestaccording valued log splitter. a backup as needed.

Has a CTR quality with patented ‘Cone’ square Handlesfeet logs up 32”. Uses 1999 Bandit 1900 Tracked Disc to itsdelimber, grapple has been will chips be adding 110,000 of tostate-of-the-art manufacturing space existing facility, inrebuilt.

St. drum design. Can easily load 42’ 13HP Honda motor. Manual start Chipper - Cat Under Carriage at Boom cylinders have minor leaks.

Martin, Minnesota. The new space will house a dedicated space for research and development, advanced vans and produce 6 - 8 loads per but electronic option is available.

50% or better. 475 hp Cummins Item ID 13694. Sam x702 equipment, cutting-edge technology, and additional personnel to boost production capacity and overall day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge Diesel. 7500 Hours. One owner.

94 Barko 275 - Excellent value efficiency.

EDGERS & GANGS adjustable to single two way. Great Well maintained. Item ID 13294. with low at hours at 3,500. 5.9 Brewco Saws - Two Brewco ,Saws Value! PA.CEO Item ID 12062. Sam x702 Sam x702 CUMMINS continuous grapple.

Tosh Brinkerhoff Rotochopper expressed his excitement about the expansion.

He said, "I am excited in excellent condition. Runs great.

Firewood Processor - This is a 2004 Bandit Beast Model 4680 Runs Great!. Item ID 13740. Sam about this addition to our factory. The new research and development space provides an environment for Item ID 13644. Sam x702 homemade processor with a 10’ 3412 Caterpillar Diesel engine x702 our team to innovate on the latest and greatest technologies to help our customers be more productive and FIREWOOD PROCESSORS log deck. Has a hydraulic grapple, with 850 HP. 5300 hrs. Mill in BELL profi table.

It also opens upchain manufacturing with strong demand."

2010 Shop Built Wood Processor and kicker that allspace runs offto keep goodup condition.

Just finished 10 1990 Bell Super T - This Bell has - It has a 353 Detroit diesel, 40 Acre clearing job,waste ready toreduction work! a brand new Duetzanticipates engine. Lever of a 4 cylinder Mercedes power Rotochopper, a leading manufacturer of horizontal grinders and equipment, inch insert tooth circle saw, 30 foot Remote control.

Big production control, 33” bar, pump and tranny unit.

Has a 4’ chain saw that kicks the project to be completed in late 2023.  Issue 364 430

Lumbermens™  since 1986

❘

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 25

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer NOTCHER 2016 WOODMIZER LT-40HD (CHALLENGER MACHINE BUILT) 13428 Victory Ln. // PO Box 124 Item ID: 5632 Item ID: 2125 Adams Center, NY 13606

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

‘13 KMC 2500 Track Skidder Item ID:JD 14078 550G LT Contact: Austin Item ID: 3686 Ph: (888) 401-6367 x703

capacity!.Item ItemID: ID5559 13421. Sam x702

well built processor. Item ID 13820.

motor, Rotobec continuous

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 801-362-2170 off onto (C) a conveyor.

This is a very

Sam x702

B U Y S

Firewood Processor - This is

‘05 Gehl CTL 70

H O T

2018 WOODMIZER ‘83 John Deere LT-50 SUPER 4850 Item ID: 5519

Item ID: 14073 Contact: AUSTIN Contact: Austin Email: Austin@lumbermensco.com Ph: (888) 401-6367 x703 Phone: 888-401-6367 EXT 703 (C) 931-797-8029

with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco2020 SawsWOODMIZER - Two Brewco Saws

in excellent condition. Runs great.

LT-40 WIDE

Item ID 13644. x702 ItemSam ID: 5549

FIREWOOD PROCESSORS

Contact: AUSTIN

2010 Shop Built Wood Processor Email: Austin@lumbermensco.com 888-401-6367 EXT 703 - ItPhone: has a 353 Detroit diesel, 40 (C) 931-797-8029

inch insert tooth circle saw, 30 foot  Issue 364 430

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 2019 WOODMIZER LT-70

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes

2022 WOODMIZER LT-40 tach, oil pressure, water temp and

SUPER WIDE Item ID: 5641 chain conveyer, 8 way splitter, on

amp gauges.

Cuts logs up SUPER WIDE HDto 16”.

Item 5612 One owner andID: comes with all

Email: Austin@lumbermensco.com 13916.

Austin x703 Phone: 888-401-6367 EXT 703 Best Value Log Splitter (C)Portable 931-797-8029

Email: Austin@lumbermensco.com new for $32,500. Item ID 13865.

Phone: 888-401-6367 EXT 703 Sam x702(C) 931-797-8029

20,000lb goose neck trailer. Item ID Contact: AUSTIN

- Small manufacturer in PA has

made the best valued log splitter.

manuals receipts. Purchased Contact:and AUSTIN

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

12′ JD 550K LGP

homemadeItem processor with a 10’ ID: 3753 log deck. Has a hydraulic grapple, Contact: JOE

chain and kicker that all runs off Email: Joe@lumbermensco.com 888-401-6367 EXT 709 ofPhone: a 4 cylinder Mercedes power (C) 801-362-2170

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 -

CAT D6K2

3412 Caterpillar Diesel engine Item ID: 1488 with 850 HP. 5300 hrs. Mill in Contact: JOE

good condition.

Just finished 10 Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXTto 709 Acre clearing job, ready work!

(C) 801-362-2170

Remote control. Big production

 List  seLL  exchange  buy  save

TIMBERKING B20 SAWMIL

Contact: AUSTIN BARKO Email: Austin@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 703 (C) 931-797-8029 knuckleboom, 30' boom, 75hp

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing14′ head. works JDhead 650K LGPgreat.

Item ID: 3574 Item ID 13185.

Sam x702

1999 Barko Contact: JOE160D - new engine with Email: Joe@lumbermensco.com approximately 1500 hours. Hour Phone: 888-401-6367 EXT 709

meter dont work. The last 2 owners (C) 801-362-2170 have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuousLT-3000 grapple.

13′ WOODMIZER

Runs Great!. Item ID 13740. Sam x702

OPERATION

Item ID: 5007

BELL

Contact: AUSTIN

1990 Bell Super T - This Bell has Email: Austin@lumbermensco.com

EXT 703 aPhone: brand888-401-6367 new Duetz engine.

Lever (C) 931-797-8029

control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at Boonville, New York www.LumberMB\ISmagazine.com www.starwebhosting.net/woodsmen/

The Tree that Started 1996 TIMBERJACK 380C it All!

Item ID: 4825 Since 1986, Lumbermens has Contact: AUSTIN published a monthly circular Email: Austin@lumbermensco.com reaching sawmills, loggers, Phone: 888-401-6367 EXT 703 pallet makers, recyclers and (C) 931-797-8029 industrial woodworking plants worldwide.

LOGGING & HEAVY EQUIPMENT EXPO Contact: AUSTIN Thurs, 7 Sept - Sat, 9 Sept Email: Austin@lumbermensco.com

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Escanaba, Michigan Phone: 888-401-6367 EXT 703 (C) 931-797-8029

MID-ATLANTIC

LOGGING & BIOMASS EXPO

is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx FMC 210 Item ID: 5526

THE Contact: PAUL BUNYAN SHOW AUSTIN Fri,Email: 6 Oct Sun, 8 Oct Austin@lumbermensco.com Phone: 888-401-6367 Cambridge, Ohio EXT 703 (C) 931-797-8029 www.ohioforest.org

Item ID 13876. Austin x703 S & W 125 Band Mill with

98′ JOHN DEERE- Low 640Ehours Caterpillar generator Item ID: 2701 on the mill, electronic computer Set

Contact: AUSTIN works,1 1/2" or 2" band, 22ft. track Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 (C) 931-797-8029

hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

86′ TIMBERJACK 230A

Bell's Machining ..................... 27 Item ID: 3605 Brute Force Mfg. ..................... 31

1983 JOHN DEERE 640C30 Metal Detector's Inc. ..............

Item ID: 5582 Midwest Sharpening.............. 26

Email:Equipment Joe@lumbermensco.com Buck (AIM) ........ 36

Email: Austin@lumbermensco.com Mor bark ..................................... 9

Corley (C) Mfg .............................. 32 801-362-2170

Multitek(C) ...................................

12 931-797-8029

Columbia, TN 38402

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers TIMBERJACK 208 and writers, the Lumberman's Item ID: 5320 Exchange, its principles and associates, not held liable for Contact: are AUSTIN errors or Austin@lumbermensco.com omissions. Reproduction, Email: inPhone: whole or part, is prohibited with­ 888-401-6367 EXT 703 out written (C)consent.

931-797-8029 ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

JOHN DEERE......................

440C’S Hahn Machinery 3

The Paul Bunyan Show ......... 39

PACKAGE DEAL Hurst Boiler .............................

14 Item ID: 1966 Iron Bull ................................... 21

FRANKLIN 170 SKIDDER Thomas Industrial Controls ..... 10 Item ID: 3517 Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22 Email: Austin@lumbermensco.com

Universal Refiner ................... 23 Email: Joe@lumbermensco.com

Lignomat ................................. 24 (C) 931-797-8029

WoodMizer ................................ l (C) 801-362-2170

Contact:POSTMASTER AUSTIN Email: SendAustin@lumbermensco.com address changes to: Phone: 888-401-6367 EXT 703 Lumberman's Exchange (C) 931-797-8029 P.O. Box 1916

is supported on both sides. This

Contact: JOE

Phone: 888-401-6367 EXT 709

Contact: AUSTIN

Phone: 888-401-6367 EXT 703

- USED FORESTRY EQUIPMENT FOR SALE

❘

Contact: AUSTIN

Phone: 888-401-6367 EXT 703

Contact: JOE

Phone: 888-401-6367 EXT 709

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

L O G G I N G

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

(888) 401-6367 ext. 702 sam@lumbermens.co

it includes two sets of Mcdonough

in ve1y good condition, Cuts 130

Contact: AUSTIN Donna Heninger Email: Austin@lumbermensco.com Phone: 888-401-6367REPS EXT 703 EQUIPMENT (C) 931-797-8029 Sam Wall

AD SUBMISSIONS 98′May JOHN DEERE be sent to­640G Item ID: 2694 morris@lumbermens.co

that go up and down, with airbags,

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept CAT 225LC EXCAVATOR Item ID: 5419

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

Contact: AUSTIN bells and whistles, its a production Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 machine, with air strain conveyers (C) 931-797-8029

pressure guides. Top Casting wheel

John Williams (888) 401-6367 ext. 701 02′ JOHN DEERE 640G2 j@lumbermens.co Item ID: 4710

MAILING ADDRESS

90′ TIMBERJACK 240A

feed deck 20 foot out feed deck Item ID: 5082 with 44 inch wheels, and all the

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

MARKETING DIRECTOR

DESIGN DIRECTOR

10 hours on this machine since it has been rebuilt, it has a 24foot in

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com JOHN DEERE 540D INT'L CABLE SKIDDER 72ND ANNUAL GREAT LAKES Item ID: 5249 Item ID: 5568

PUBLISHER

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

with onboard log turners, carriage drive, hyd pac for carriage,

06′ JOHN DEERE 335

sawyers cab, computer controls,

LOGelectronic LOADERdrives for cabinet with Item ID: 5403 carriage knees, husk including

Contact: JOE 48" bottom saw and 36" top saw Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

STACKING RAC JOHN DEERE 440C Item ID: 5242

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net (C) 931-797-8029

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 27

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM “Precision Under Pressure”

‘16 Halverson H140 Skidsteer (DEMO) TIMBERJACK 208 Item ID: 5320

PRENTICE 210B Item ID: 5085

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘93 Barko 180B

Item ID: JW-909632 2022 TIGERCAT Contact: J Williams620H Item ID: 5334x701 Ph: (888) 401-6367

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703 TAJFUN EQUIPMENT Item ID: 5368

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘95 John Deere C6 Tree Farmer

L O G G I N G

‘13 KMC 2500 Track Skidder 13428 Victory 643JLn. // PO Box 124 BELL SUPER T CUTTER Adams Center, Item ID: 4907NY 13606 Item ID: 4952 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID: 14078 13′ BARKOAustin 595ML MAGNUM Contact: Item ID: 4974x703 Ph: (888) 401-6367

capacity!.Item ItemID: ID5358 13421. Sam x702

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 off onto a conveyor. This is a very (C) 931-797-8029

Contact: AUSTIN 1994 Barko 160B - Electric Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 knuckleboom, 30' boom, 75hp (C) 931-797-8029

Sam x702

grapple, 5,000 original hours.

well built processor. Item ID 13820.

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850 TIMBERJACK 1270

Item ID:Item 14073 ID: 5199 Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

TIGERCAT Item ID 04′ 13644.

Sam x702 620 Item 4705 FIREWOOD ID: PROCESSORS

Contact: AUSTIN 2010 Shop Built Wood Processor

Email: Austin@lumbermensco.com - ItPhone: has a 353 Detroit diesel, 40 888-401-6367 EXT 703 931-797-8029 inch insert(C) tooth circle saw, 30 foot

 Issue 364 430

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 2016 TAJFUN 400 JOY

chain conveyer, 8 way splitter, on Item ID: 5227 20,000lb goose neck trailer. Item ID Contact: AUSTIN

13916. x703 Email:Austin Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Best Value Portable Log Splitter (C) 931-797-8029

- Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and

LIEBHERR A312

amp gauges. Cuts logs up to 16”.

WITH RYANS HEAD

One owner and comes with all Item ID: 4979 manuals and receipts. Purchased Contact: AUSTIN

new forAustin@lumbermensco.com $32,500. Item ID 13865.

Email: Phone: 888-401-6367 EXT 703 Sam x702 (C) 931-797-8029

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

18′ JOHN DEERE 753J homemade processor with a 10’ Item ID: 4968 log deck. Has a hydraulic grapple, Contact: AUSTINthat all runs off chain and kicker

Email: Austin@lumbermensco.com ofPhone: a 4 cylinder Mercedes 888-401-6367 EXTpower 703 931-797-8029 unit. Has(C) a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 -

CAT D5H TSK 3412 Caterpillar Diesel engine Item ID: 4939 with 850 HP. 5300 hrs. Mill in

Contact: AUSTINJust finished 10 good condition.

Email: Austin@lumbermensco.com Acre clearing job, ready work!

Phone: 888-401-6367 EXTto 703 (C) 931-797-8029 Remote control.

Big production

 List  seLL  exchange  buy  save

TIMBERJACK 1010

BARKO

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

CAT 538

Item ID 13185. Sam x702 Item ID: 5302 1999 Barko 160D - new engine with Contact: AUSTIN

approximately 1500 hours. Hour Email: Austin@lumbermensco.com

Phone:dont 888-401-6367 EXT 703 meter work. The last 2 owners (C) 931-797-8029

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702 TIMBCO 445EXL Item ID: 5293 BELL

Contact: 1990 BellAUSTIN Super T - This Bell has

Email: Austin@lumbermensco.com

aPhone: brand888-401-6367 new Duetz engine.

EXT 703Lever

931-797-8029 control,(C) 33” bar, pump and tranny

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at Boonville, New York www.LumberMB\ISmagazine.com www.starwebhosting.net/woodsmen/

The Tree

TIMBERJACK 380C that Started

GRAPPLE SKIDDER it All! Item ID: 863

Since 1986, Lumbermens has Contact: SAM published a monthly circular Email: Sam@lumbermensco.com reaching sawmills, loggers, Phone: 888-401-6367 EXT 702 pallet makers, recyclers and (C) 615-596-4148 industrial woodworking plants worldwide.

LOGGING & HEAVY EQUIPMENT EXPO

it includes two sets of Mcdonough

MID-ATLANTIC

LOGGING & BIOMASS EXPO

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

Contact: MOSE Phone: 208-290-1888

Contact:POSTMASTER JOE Email: SendJoe@lumbermensco.com address changes to: Phone: 888-401-6367 EXT 709 Lumberman's Exchange (C) 801-362-2170 P.O. Box 1916

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

’92 TIMBERJACK 450C THE PAUL BUNYAN SHOW Item ID: 1369 Fri, 6 Oct - Sun, 8 Oct Contact: ROBERT Cambridge, Ohio Phone: 606-875-4783 www.ohioforest.org

Item ID 13876. Austin x703 S & W 125 Band Mill with

TIMBCO 425D Caterpillar generator - Low hours Item ID: 1429 on the mill, electronic computer Set

Contact: AUSTIN works,1 1/2" or 2" band, 22ft. track Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 (C) 931-797-8029

hours ready to run. Item ID 13434.

Sam x702

** INFO LINK** B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

JOHN Saw DEERE 550G 29 Menominee .....................

1979 TIMBERJACK 230

Bell's Machining ..................... 27

CABLE SKIDDER Brute Force Mfg. ..................... 31 Item ID: 1072

Phone: 807-631-4081 Corley Mfg .............................. 32

Contact: KYLE

Columbia, TN 38402

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is JD 700J LGP published06′ monthly

by Woods Publishing, Item P.O. Box ID: 1916, 3787 Columbia, TN 38402. All rights Enclosed cab, Winch strong, reserved.

All editorial/ advertorial New sprockets gothewith it, submissions are used at Undercarriage 55%, and Has may no discretion of the publisher mechanical issues, ofbeen taken be edited for purposes clarity of, Although The owner done have with andcare space. allisefforts a project bought it for, Have been made toheensure accuracy of a reliable truckerby available.

Buyer content submitted advertisers pays for trucking, About 80mi and writers, the Lumberman's south of Louisville, KY Exchange, its principles and associates, are not held liable for Contact: JOE errors or Joe@lumbermensco.com omissions. Reproduction, Email: inPhone: whole or part, is prohibited with­ 888-401-6367 EXT 709 out written (C)consent.

801-362-2170 ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

14′Boiler JOHN.............................

DEERE 748H 14 Hurst Item ID: 2707 Iron Bull ................................... 21

JOHN DEERE 648D..... 10 Thomas Industrial Controls Item ID: 547 Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22 Email: Austin@lumbermensco.com

Universal Refiner ................... 23 Email: Sam@lumbermensco.com

Lignomat ................................. 24 (C) 931-797-8029

WoodMizer ................................ l (C) 615-596-4148

Buck Equipment (AIM) ........ 36

Contact: AUSTIN

Phone: 888-401-6367 EXT 703

- USED FORESTRY EQUIPMENT FOR SALE

❘

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal

Carriage line it includes carriage

with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls,

CRAWLERInc DOZER Metal Detector's . .............. 30 Item ID: 5388 Midwest Sharpening.............. 26 Contact: JOE Email: Joe@lumbermensco.com Mor bark ..................................... 9 Phone: 888-401-6367 EXT 709 Multitek(C) ...................................

12 801-362-2170

cabinet with electronic drives for carriage knees, husk including 460 TIMBERJACK Item ID:and 1124 48" bottom saw 36" top saw Contact: MARCUS Phone: 660-833-9061

STACKING RAC TIGERCAT 822 Item ID: 1130

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net (C) 931-797-8029

Contact: SAM

Phone: 888-401-6367 EXT 702

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

L O G G I N G

EXCAVATOR 225 LC Item ID: 1067

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

AD SUBMISSIONS 16′ 700K May beJD sent to­ Item ID: 4343 morris@lumbermens.co

that go up and down, with airbags,

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

LOG LOADER

(888) 401-6367 ext. 702 sam@lumbermens.co

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

PROCESSOR

feed deck 20 foot out feed deck Item ID: 2593 with 44 inch wheels, and all the

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

(888) 401-6367 ext. 701 KNUCKLEBOOM LOADER j@lumbermens.co Item ID: 978 DESIGN DIRECTOR

MAILING ADDRESS

2016 HYPRO 755HB

Contact: AUSTIN bells and whistles, its a production Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 machine, with air strain conveyers (C) 931-797-8029

MARKETING DIRECTOR PRENTICE 384 John Williams

Contact: AUSTIN Donna Heninger Email: Austin@lumbermensco.com Phone: 888-401-6367REPS EXT 703 EQUIPMENT (C) 931-797-8029 Sam Wall

10 hours on this machine since it has been rebuilt, it has a 24foot in

Contact: AUSTIN Contact: AUSTIN 7 Sept - Sat, 9 Sept Email: Austin@lumbermensco.comThurs, Email: Austin@lumbermensco.com Escanaba, Michigan Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 (C) 931-797-8029 (C) 931-797-8029

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com 2009 JOHN DEERE 548G3 725B TIMBERPRO 72ND ANNUAL GREAT LAKES Item ID: 4699 Item ID: 1398

PUBLISHER

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 29

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM “Precision Under Pressure”

TIMBER JACK 450B 04′ JD 450H Item ID: 4327 Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

GRAPPLE SKIDDER Item ID: 5452 Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

‘16 Halverson H140 Skidsteer (DEMO)

‘93 Barko 180B

Item ID: JW-909632 12′ JD 648H Contact: J Williams Item ID: 5253x701 Ph: (888) 401-6367

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703 02′ CASE 650H Item ID: 3511

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

‘95 John Deere C6 Tree Farmer

L O G G I N G

‘13 KMC 2500 Track Skidder 13428 98′ Victory Ln. // PO Box 124 TJ 460 Adams Center, Item ID: 4918NY 13606 Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

JOHN DEERE 848L Item ID: 1184

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID: 14078 15′ TIGERCAT Contact: Austin 610E Item ID: 4944x703 Ph: (888) 401-6367

capacity!.Item ItemID: ID1531 13421. Sam x702

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 off onto a conveyor. This is a very (C) 931-797-8029

Contact: AUSTIN 1994 160B - Electric Email:Barko Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 knuckleboom, 30' boom, 75hp (C) 931-797-8029

Sam x702

grapple, 5,000 original hours.

well built processor. Item ID 13820.

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 03′ JOHN DEERE 4850648G III SKIDDER

Item ID:Item 14073 ID: 5647 Contact: Austin Contact: JOE Ph: (888) 401-6367 x703 Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

90′Sam JD 550G Item ID 13644. x702 Item ID: 3873 FIREWOOD PROCESSORS

Contact: JOE Wood Processor 2010 Shop Built

Email: Joe@lumbermensco.com - ItPhone: has a 353 Detroit diesel, 40 888-401-6367 EXT 709 801-362-2170 inch insert(C) tooth circle saw, 30 foot

 Issue 364 430

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 TJ 450B

chain conveyer, 8 way splitter, on Item ID: 5098 20,000lb goose neck trailer. Item ID Contact: JOE

13916.

Austin x703 Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 Best Value Portable Log Splitter (C) 801-362-2170

- Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

14′ TIGERCAT 720E

One owner and comes with all Item ID: 1617 manuals and receipts. Purchased Contact: AUSTIN

new forAustin@lumbermensco.com $32,500. Item ID 13865.

Email: Phone: 888-401-6367 EXT 703 Sam x702 (C) 931-797-8029

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

JD 648Lwith a 10’ homemade processor Item ID: 5073 log deck. Has a hydraulic grapple, Contact: JOE chain and kicker that all runs off

Email: Joe@lumbermensco.com ofPhone: a 4 cylinder Mercedes 888-401-6367 EXTpower 709 801-362-2170 unit. Has(C) a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

’95 JOHN DEERE 2004 Bandit Beast Model 4680 548G II SKIDDER 3412 Caterpillar Diesel engine Item ID: 5605 with 850 HP. 5300 hrs.

Mill in

Contact: JOE good condition.

Just finished 10

Email: Joe@lumbermensco.com Acre clearing job, ready work!

Phone: 888-401-6367 EXTto 709 801-362-2170 Remote (C) control.

Big production

 List  seLL  exchange  buy  save

JOHN DEERE 643K

BARKO

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

92′ CAT D5H

Item ID 13185. Sam x702 Item ID: 4678 1999 Barko 160D - new engine with Contact: JOE

approximately 1500 hours. Hour Email: Joe@lumbermensco.com

Phone:dont 888-401-6367 EXT 709 meter work. The last 2 owners (C) 801-362-2170

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702 JOHN DEERE 753J Item ID: 1582 BELL

Contact: 1990 BellAUSTIN Super T - This Bell has Email: Austin@lumbermensco.com a brand new Duetz engine.

Phone: 888-401-6367 EXT 703Lever 931-797-8029 control,(C) 33” bar, pump and tranny

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at Boonville, New York www.LumberMB\ISmagazine.com www.starwebhosting.net/woodsmen/

The Tree that Started 98′itCAT All! 515

Item ID: 4671 Since 1986, Lumbermens has Contact: JOE published a monthly circular Email: Joe@lumbermensco.com reaching sawmills, loggers, Phone: 888-401-6367 EXT 709 pallet makers, recyclers and (C) 801-362-2170 industrial woodworking plants worldwide.

LOGGING & HEAVY EQUIPMENT EXPO

Contact: JOE Contact: AUSTIN Thurs, 7 Sept - Sat, 9 Sept Email: Joe@lumbermensco.com Email: Austin@lumbermensco.com Escanaba, Michigan Phone: 888-401-6367 EXT 709 Phone: 888-401-6367 EXT 703 (C) 801-362-2170 (C) 931-797-8029

MID-ATLANTIC

LOGGING & BIOMASS EXPO

is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx 04′ TIMBERJACK 460D Item ID: 2724

Item ID 13876. Austin x703 S & W 125 Band Mill with

98′ JOHN DEERE 648hours Caterpillar generator - Low Item ID: 2798 on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Contact: AUSTIN Fri,Email: 6 Oct - Sun, 8 Oct Austin@lumbermensco.com

Contact: AUSTIN works,1 1/2" or 2" band, 22ft. track Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 (C) 931-797-8029

Phone: 888-401-6367 Cambridge, Ohio EXT 703 (C) 931-797-8029 www.ohioforest.org

hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

Bell's Machining ..................... 27 Item ID: 2646 Brute Force Mfg. ..................... 31

04′Detector's JOHN DEERE 648G330 Metal Inc. ..............

Item ID: 2791 Midwest Sharpening.............. 26

Email:Equipment Austin@lumbermensco.com Buck (AIM) ........ 36

Email: Austin@lumbermensco.com Mor bark ..................................... 9

Corley (C) Mfg .............................. 32 931-797-8029

Multitek(C) ...................................

12 931-797-8029

Columbia, TN 38402

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers 99′ FRANKLIN 170 and writers, the Lumberman's Item ID: 4586 Exchange, its principles and associates, Contact: are JOEnot held liable for errors or Joe@lumbermensco.com omissions. Reproduction, Email: inPhone: whole or part, is prohibited with­ 888-401-6367 EXT 709 out written (C)consent.

801-362-2170 ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

15′ CAT 525D Hurst Boiler .............................

14 Item ID: 3172 Iron Bull ................................... 21

CLARK F666Controls RANGER Thomas Industrial ..... 10 Item ID: 3233 Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22 Email: Joe@lumbermensco.com

Universal Refiner ................... 23 Email: Joe@lumbermensco.com

Lignomat ................................. 24 (C) 801-362-2170

WoodMizer ................................ l (C) 801-362-2170

Contact:POSTMASTER JOE Email: SendJoe@lumbermensco.com address changes to: Phone: 888-401-6367 EXT 709 Lumberman's Exchange (C) 801-362-2170 P.O. Box 1916

is supported on both sides. This

2013 JOHN DEERE 848H

Contact: AUSTIN

Phone: 888-401-6367 EXT 703

Contact: JOE

Phone: 888-401-6367 EXT 709

- USED FORESTRY EQUIPMENT FOR SALE

❘

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal

Carriage line it includes carriage

with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls,

02′ electronic TJ 660D drives for cabinet with Item ID: 4088 carriage knees, husk including

Contact: AUSTIN

Contact: JOE 48" bottom saw and 36" top saw Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Phone: 888-401-6367 EXT 703

STACKING RAC 12′ TIGERCAT 620D Item ID: 2753

Contact: JOE

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net (C) 931-797-8029

Phone: 888-401-6367 EXT 709

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

L O G G I N G

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

(888) 401-6367 ext. 702 sam@lumbermens.co

it includes two sets of Mcdonough

in ve1y good condition, Cuts 130

Contact: JOE Donna Heninger Email: Joe@lumbermensco.com Phone: 888-401-6367REPS EXT 709 EQUIPMENT (C) 801-362-2170 Sam Wall

AD SUBMISSIONS 02′be CAT 525B May sent to­ Item ID: 3214 morris@lumbermens.co

that go up and down, with airbags,

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept 06′ TIGERCAT 635C Item ID: 3322

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

Contact: JOE bells and whistles, its a production Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 machine, with air strain conveyers (C) 801-362-2170

pressure guides. Top Casting wheel

John Williams (888) 401-6367 ext. 701 TJ 460D j@lumbermens.co Item ID: 3286

MAILING ADDRESS

00′ JD 748G III

feed deck 20 foot out feed deck Item ID: 3210 with 44 inch wheels, and all the

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

MARKETING DIRECTOR

DESIGN DIRECTOR

10 hours on this machine since it has been rebuilt, it has a 24foot in

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com 2004 JOHN DEERE 648G3 13′ JD 648H 72ND ANNUAL GREAT LAKES Item ID: 2628 Item ID: 3589

PUBLISHER

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 31

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM “Precision Under Pressure”

‘16 Halverson H140 Skidsteer (DEMO) 83′ TJ 380A Item ID: 2133 Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

13′ CAT 545C Item ID: 2117 Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

‘93 Barko 180B

Item ID: JW-909632 08′ JDJ 535 SERIES II Contact: Williams Item ID: 4580x701 Ph: (888) 401-6367

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703 10′ JOHN DEERE 648H Item ID: 1847

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘95 John Deere C6 Tree Farmer

L O G G I N G

‘13 KMC 2500 Track Skidder 13428 Victory Ln. // PO Box 124 CAT 515 Adams Center, Item ID: 1739NY 13606 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

04′ JD 435 II Item ID: 4169

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 CAT 515 x703 Item ID: 1509

‘83 John Deere 4850

15′ CAT 559C LOADER Item ID: 14073 Item ID: 5534 Contact: Austin Contact: JOE Ph: (888) 401-6367 x703

Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 801-362-2170 with 1700(C) hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

TIMBERJACK 240A in excellent condition. Runs great.

Item IDGRAPPLE 13644. SamSKIDDER x702 Item ID: 1769 FIREWOOD PROCESSORS

Contact: AUSTIN 2010 Shop Built Wood Processor

Email: Austin@lumbermensco.com - ItPhone: has a 353 Detroit diesel, 40 888-401-6367 EXT 703 931-797-8029 inch insert(C) tooth circle saw, 30 foot

 Issue 364 430

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 17′ JD 437E chain conveyer, 8 way splitter, on Itemneck ID: 4809 20,000lb goose trailer. Item ID Contact: JOE x703 13916.

Austin

Email: Joe@lumbermensco.com Best Value Portable Log Splitter Phone: 888-401-6367 EXT 709 (C) 801-362-2170 - Small manufacturer in PA has

made the best valued log splitter.

Sam x702

grapple, 5,000 original hours.

Contact: ERVIN

well built processor. Item ID 13820.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

TIMBERJACK 460

One owner and comes with all Item ID: 1777 manuals and receipts. Purchased Contact: AUSTIN

new forAustin@lumbermensco.com $32,500. Item ID 13865.

Email: Phone: 888-401-6367 EXT 703 Sam x702 (C) 931-797-8029

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

TIGERCAT homemade processor630E with a 10’ Item ID: 1098 log deck. Has a hydraulic grapple, Contact: AUSTINthat all runs off chain and kicker

Email: Austin@lumbermensco.com ofPhone: a 4 cylinder Mercedes 888-401-6367 EXTpower 703 931-797-8029 unit. Has(C) a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

BARKO

off onto (641) a conveyor.

This is a very Phone: 229-1012

Handles logs up to 32”. Uses

13HP Honda motor. Manual start

04′ TIMBERJACK 460D

capacity!.Item ItemID: ID5445 13421. Sam x702 Contact: JOE 1994 Barko 160B - Electric Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 knuckleboom, 30' boom, 75hp (C) 801-362-2170

Firewood Processor - This is

‘05 Gehl CTL 70

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 -

13′ TIGERCAT 234 3412 Caterpillar Diesel engine Item ID: 4803 with 850 HP. 5300 hrs. Mill in

Contact: JOE good condition.

Just finished 10

Email: Joe@lumbermensco.com Acre clearing job, ready work!

Phone: 888-401-6367 EXTto 709 801-362-2170 Remote (C) control.

Big production

 List  seLL  exchange  buy  save

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

00′ TIGERCAT 245

Item ID 13185. Sam x702 Item ID: 4685 1999 Barko 160D - new engine with Contact: JOE

approximately 1500 hours. Hour Email: Joe@lumbermensco.com

Phone:dont 888-401-6367 EXT 709 meter work. The last 2 owners (C) 801-362-2170

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702 95′ PRENTICE 210E Item ID: 3628 BELL

Contact: 1990 BellJOE Super T - This Bell has Email: Joe@lumbermensco.com

aPhone: brand888-401-6367 new Duetz engine.

EXT 709Lever

801-362-2170 control,(C) 33” bar, pump and tranny

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at Boonville, New York www.LumberMB\ISmagazine.com www.starwebhosting.net/woodsmen/

The Tree that Started 98′ PRENTICE it All! 280

Item ID: 2166 Since 1986, Lumbermens has Contact: JOE published a monthly circular Email: Joe@lumbermensco.com reaching sawmills, loggers, Phone: 888-401-6367 EXT 709 pallet makers, recyclers and (C) 801-362-2170 industrial woodworking plants worldwide.

JOHN DEERE 1010D LOGGING & HEAVY EQUIPMENT EXPO Contact: JOE Item ID: 1715 Thurs, 7 Sept - Sat, 9 Sept

MARKETING DIRECTOR

DESIGN DIRECTOR

Contact: AUSTIN Donna Heninger Email: Austin@lumbermensco.com Phone: 888-401-6367REPS EXT 703 EQUIPMENT (C) 931-797-8029 Sam Wall

MID-ATLANTIC

LOGGING & BIOMASS EXPO

AD SUBMISSIONS 2014 PONSSE SCORPION May be sent to­ KING Item ID: 4914 morris@lumbermens.co

that go up and down, with airbags, it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

S & W 125 Band Mill with

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN works,1 1/2" or 2" band, 22ft. track Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 (C) 931-797-8029

Item ID 13876. Austin x703

08′ TIMBCO 415EX Caterpillar generator - Low hours Item ID: 1661 on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Contact: JOE Fri,Email: 6 Oct - Sun, 8 Oct Joe@lumbermensco.com Phone: 888-401-6367 Cambridge, Ohio EXT 709 (C) 801-362-2170 www.ohioforest.org

hours ready to run. Item ID 13434.

Sam x702

** INFO LINK** B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

Bell's Machining ..................... 27 Item ID: 1480 Brute Force Mfg. ..................... 31

14′Detector's JOHN DEERE 437D 30 Metal Inc. ..............

Item ID: 2740 Midwest Sharpening.............. 26

Email:Equipment Austin@lumbermensco.com Buck (AIM) ........ 36

Email: Austin@lumbermensco.com Mor bark ..................................... 9

Corley (C) Mfg .............................. 32 931-797-8029

Multitek(C) ...................................

12 931-797-8029

Columbia, TN 38402

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers VALMET 840.2 FORWARDER and writers, the Lumberman's ID: 741 Exchange, itsItem principles and associates, are not held liable for Contact: AUSTIN errors or Austin@lumbermensco.com omissions. Reproduction, Email: inPhone: whole or part, is prohibited with­ 888-401-6367 EXT 703 out written (C)consent.

931-797-8029 ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

MORBARK 6036 CHIPPER14 Hurst Boiler .............................

Item ID: 1084 Iron Bull ................................... 21

JOHN DEERE 1270..... 10 Thomas Industrial Controls Item ID: 1350 Union Grove Saw & Knife.. 2, 37

Contact:POSTMASTER AUSTIN Email: SendAustin@lumbermensco.com address changes to: Phone: 888-401-6367 EXT 703 Lumberman's Exchange (C) 931-797-8029 P.O. Box 1916

Contact: AUSTIN bells and whistles, its a production Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 machine, with air strain conveyers (C) 931-797-8029

Lexington, Kentucky 2004 PONSSE ERGO http://www.kfia.org/ KOBELCO 250 LOG LOADER KentuckyWoodExpo.aspx HARVESTER Item ID: 2584 Item ID: 2656

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

2004 PRENTICE 384

feed deck 20 foot out feed deck Item ID: 2637 with 44 inch wheels, and all the

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

(888) 401-6367 ext. 702 sam@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

VALMET 644

Contact: AUSTIN

Phone: 888-401-6367 EXT 703

Contact: SAM Kilgore Saw ............................. 22 Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 Lignomat ................................. 24 (C) 615-596-4148

- USED FORESTRY EQUIPMENT FOR SALE

❘

Contact: AUSTIN

Phone: 888-401-6367 EXT 703

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

with onboard log turners, carriage drive, hyd pac for carriage,

MORBARK MODEL 20

sawyers cab, computer controls,

CHIPHARVESTER cabinet with electronic drives for Item ID: 1246 carriage knees, husk including

Contact: SAM 48" bottom saw and 36" top saw Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 (C) 615-596-4148

STACKING RAC JOHN DEERE 85D Item ID: 1035

Contact: AUSTIN Universal Refiner ................... 23 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 WoodMizer ................................ l (C) 931-797-8029

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

L O G G I N G

John Williams (888) 401-6367 ext. 701 VALMET 840.4 j@lumbermens.co Item ID: 1222

Email: Joe@lumbermensco.com Escanaba, Michigan Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: JAKE Phone: (440) 537-5124

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com 08 ROTTNE H14 72ND ANNUAL GREAT LAKES Item ID: 2062

PUBLISHER

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

Contact: RON www.BakerProducts.net Phone: (606) 595-1734

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 33

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM “Precision Under Pressure”

ROTOSAW CUTTER Item ID: 3144

Item ID: JW-909632 JD 843J Contact:08′ J Williams Item ID: 2109x701 Ph: (888) 401-6367

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

84′ CAT 518

L O G G I N G

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703 05′ HYDRO-AX 721E Item ID: 3644

12′ JD 643K Item ID: 4896 Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

‘16 Halverson H140 Skidsteer (DEMO)

‘95 John Deere C6 Tree Farmer

13428 Victory Ln.724 // PO 15′ TIGERCAT G Box 124 Adams Center, Item ID: 3392NY 13606 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

15′ CAT 553C FELLER BUNCHER Item ID: 5495

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Item ID: 14078 17′ JOHN DEERE 843L Contact: Austin Item ID: 2731x703 Ph: (888) 401-6367

capacity!.Item ItemID: ID2046 13421. Sam x702

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 off onto a conveyor. This is a very (C) 931-797-8029

Contact: JOE 1994 Barko 160B - Electric Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 knuckleboom, 30' boom, 75hp (C) 801-362-2170

Sam x702

grapple, 5,000 original hours.

well built processor. Item ID 13820.

Firewood Processor - This is

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

‘83 John Deere 4850

chain conveyer, 8 way splitter, on

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter

with 1700 hours, in very good

- Small manufacturer in PA has

condition. Easily produces high

made the best valued log splitter.

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

‘13 KMC 2500 Track Skidder

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

07′ TIMBCO 445EXL

BARKO

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dontLISTwork.

The last 2 owners SELL EXCHANGE BUY SAVE 1986 have only used EST it to load trucks or

as a backup as needed. Has a CTR

Visit our NEW Merchandise Store

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

but electronic option is available.

50% or better. 475 hp Cummins

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702

in excellent condition. Runs great.

Firewood Processor - This is a

Item ID 13644. Sam x702

homemade processor with a 10’

FIREWOOD PROCESSORS

log deck. Has a hydraulic grapple,

2010 Shop Built Wood Processor

chain and kicker that all runs off

inch insert tooth circle saw, 30 foot  Issue 364 430

1999 Bandit 1900 Tracked Disc

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

Brewco Saws - Two Brewco Saws

- It has a 353 Detroit diesel, 40

Handles logs up to 32”. Uses

of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

a brand new Duetz engine. Lever

www.lumbermenco.com

Lumbermens™  since 1986

❘

BELL

good condition. Just finished 10

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at Boonville, New York www.LumberMB\ISmagazine.com www.starwebhosting.net/woodsmen/

The Tree that Started 09′ WOODMIZER LT 300 it All!

Item ID: 4549 Since 1986, Lumbermens has Contact: JOE published a monthly circular Email: Joe@lumbermensco.com reaching sawmills, loggers, Phone: 888-401-6367 EXT 709 pallet makers, recyclers and (C) 801-362-2170 industrial woodworking plants worldwide.

SAWMILL

feed deck 20 foot out feed deck Item ID: 5559 with 44 inch wheels, and all the

Contact: AUSTIN bells and whistles, its a production Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 machine, with air strain conveyers (C) 931-797-8029

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

it includes two sets of Mcdonough

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

2017 TIMBERKING 2200 Item ID: 5513

Contact: JOE Donna Heninger Email: Joe@lumbermensco.com Phone: 888-401-6367REPS EXT 709 EQUIPMENT (C) 801-362-2170 Sam Wall

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx CORNELL SIZER Item ID: 1322

Item ID 13876. Austin x703 S & W 125 Band Mill with

2007 TIMBERKING B20hours Caterpillar generator - Low Item ID: 5540 on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Contact: SAM Fri,Email: 6 Oct - Sun, 8 Oct Sam@lumbermensco.com

Contact: AUSTIN works,1 1/2" or 2" band, 22ft. track Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 (C) 931-797-8029

Phone: 888-401-6367 Cambridge, Ohio EXT 702 (C) 615-596-4148 www.ohioforest.org

hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls,

Bell's Machining ..................... 27 Item ID: 2419 Brute Force Mfg. ..................... 31

2019 TIMBERKING 200030 Metal Detector's Inc. ..............

Item ID: 5508 Midwest Sharpening.............. 26

Email:Equipment Joe@lumbermensco.com Buck (AIM) ........ 36

Email: Austin@lumbermensco.com Mor bark ..................................... 9

Corley (C) Mfg .............................. 32 801-362-2170

Multitek(C) ...................................

12 931-797-8029

Columbia, TN 38402

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

FAST RUNShow AROUND TheGO Paul Bunyan ......... 39

2006 WOODMIZER LT-40

Hurst Boiler ............................. 14 Iron Bull ................................... 21

SYSTEM Thomas Industrial Controls..... 10 Item ID: 1200 Union Grove Saw & Knife.. 2, 37

SUPER HD PORTABLE SAWMILL Item ID: 5425

Kilgore Saw ............................. 22

Universal Refiner ................... 23 Email: Austin@lumbermensco.com

Contact:POSTMASTER JOE Email: SendJoe@lumbermensco.com address changes to: Phone: 888-401-6367 EXT 709 Lumberman's Exchange (C) 801-362-2170 P.O. Box 1916

LT40 WOODMIZER

Contact: JOE

Phone: 888-401-6367 EXT 709

Buying?

Selling?

lumbermensco.comLignomat • 888.401.6367 ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE

❘

Contact: AUSTIN

Phone: 888-401-6367 EXT 703

HURDLE SAWMILL cabinet with electronic drives for Item ID: 4949 carriage knees, husk including

Contact: AUSTIN 48" bottom saw and 36" top saw Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

STACKING RAC

Contact: AUSTIN

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net (C) 931-797-8029

Phone: 888-401-6367 EXT 703

WoodMizer ................................ l (C) 931-797-8029

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

S A W M I L L

(888) 401-6367 ext. 701 DEBARKER j@lumbermens.co Item ID: 3329

(888) 401-6367 ext. 702 sam@lumbermens.co

that go up and down, with airbags,

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

MARKETING DIRECTOR EARLY 90’S MELLOTT John Williams

19′ MORGAN MILITARY AD SUBMISSIONS NOTCHING BAND May be sent to­SAW Item ID: 3567 morris@lumbermens.co

TIMBERKING B20

LOGGING & HEAVY EQUIPMENT EXPO

ADVERTISING SALES

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

10 hours on this machine since it has been rebuilt, it has a 24foot in

Contact: AUSTIN Contact: AUSTIN 7 Sept - Sat, 9 Sept Email: Austin@lumbermensco.comThurs, Email: Austin@lumbermensco.com Escanaba, Michigan Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 (C) 931-797-8029 (C) 931-797-8029

Woods Publishing

MAILING ADDRESS

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com FENCE POST PROCESSING 2014 BAKER 13′ SAWMILL 72ND ANNUAL GREAT LAKES Item ID: 1231 Item ID: 4910

PUBLISHER

DESIGN DIRECTOR

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 35

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM “Precision Under Pressure”

‘16 Halverson H140 Skidsteer (DEMO)

FULL OPERATION Item ID: 5274

17′ COOKS AC36 SAWMILL Item ID: 5019

Item ID: JW-909632 TAJFUNJ Williams 480 PLUS JOY Contact: Item ID: 568x701 Ph: (888) 401-6367

Item ID: 14077 Contact: Austin 6HEAD Ph:EDMISTON (888) 401-6367 x703 BLOCK SAW Item ID: 5342

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

S A W M I L L S

BAKER DOMINATOR

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder

2019 WOODMIZER LT-70 13428 VictoryWIDE Ln. // PO Box 124 2017 HURDLE SAWMILL SUPER Adams Center, Item ID: 5191NY 13606 Item ID: 5025 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘05 Gehl CTL 70

‘83 John Deere 485001′ MACK RD688

Item ID:Item 14073 ID: 4479 Contact: Austin Contact: JOE Ph: (888) 401-6367 x703 Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

NYLE FIREWOOD Item ID 13644.

Sam x702DRY KILN Item ID: 3588

FIREWOOD PROCESSORS

Contact: AUSTIN 2010 Shop Built Wood Processor

Email: Austin@lumbermensco.com - ItPhone: has a 353 Detroit diesel, 40 888-401-6367 EXT 703 931-797-8029 inch insert(C) tooth circle saw, 30 foot

 Issue 364 430

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 MACK TRUCK WITH HOOD LOADER

chain conveyer, 8 way splitter, on Item ID: 1089 20,000lb goose neck trailer. Item ID Contact: SAM

13916. x703 Email:Austin Sam@lumbermensco.com Phone: 888-401-6367 EXTSplitter 702 Best Value Portable Log (C) 615-596-4148

- Small manufacturer in PA has

made the best valued log splitter.

capacity!.Item ItemID: ID5013 13421. Sam x702

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 off onto a conveyor. This is a very (C) 931-797-8029

Contact: AUSTIN 1994 Barko 160B - Electric Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 knuckleboom, 30' boom, 75hp (C) 931-797-8029

Sam x702

grapple, 5,000 original hours.

well built processor. Item ID 13820.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

WINCH FOR SALE

One owner and comes with all Item ID: 5413 manuals and receipts. Purchased Contact: AUSTIN

new forAustin@lumbermensco.com $32,500. Item ID 13865.

Email: Phone: 888-401-6367 EXT 703 Sam x702 (C) 931-797-8029

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

WARRATAH FS20a 10’ homemade processor with Item ID: 2100 log deck. Has a hydraulic grapple, Contact: JOE chain and kicker that all runs off

Email: Joe@lumbermensco.com ofPhone: a 4 cylinder Mercedes 888-401-6367 EXTpower 709 801-362-2170 unit. Has(C) a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Item ID: 14078 PRECISION 742H DEBARKER Contact: Austin Item ID: 5350x703 Ph: (888) 401-6367

Firewood Processor - This is

M I S C E L L A N E O U S

‘93 Barko 180B

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

INTERNATIONAL 2004 98′ Bandit Beast Model 4680 LOG TRUCK 3412 Caterpillar Diesel engine Item ID: 5057 with 850 HP. 5300 hrs.

Mill in

Contact: AUSTINJust finished 10 good condition.

Email: Austin@lumbermensco.com Acre clearing job, ready work!

Phone: 888-401-6367 EXTto 703 931-797-8029 Remote (C) control.

Big production

 List  seLL  exchange  buy  save

16′ COOKS AE4P EDGER

BARKO

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in

GREAT LAKES LOG TRAILER

kohing head. head works great.

SERCO 7000

Item ID 13185. Sam x702 Item ID: 1946 1999 Barko 160D - new engine with Contact: AUSTIN

approximately 1500 hours. Hour Email: Austin@lumbermensco.com

Phone:dont 888-401-6367 EXT 703 meter work. The last 2 owners (C) 931-797-8029

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

LOG MAX 7000 Item ID: 1051 BELL

Contact: 1990 BellAUSTIN Super T - This Bell has

Email: Austin@lumbermensco.com

aPhone: brand888-401-6367 new Duetz engine.

EXT 703Lever

931-797-8029 control,(C) 33” bar, pump and tranny

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 37

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

AD DIRECTORY

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 430

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

Air Systems Mfg. ...........................9 .................................. 828-757-3500 Anson ...............................................15 ............................... 800-663-7723 B & B Mfg. ......................................17 ............................... 716-373-5881 B. H. Payne .....................................22 ...............................

‘93 Barko800-752-0627 180B Brewer Machine & Parts .............7 ..................................

800-345-6516 ‘16 Halverson H140 Item ID: 14077 Buck Equipment (AIM) .................19 ...............................

800-803-3365 Contact: Austin Skidsteer (DEMO) Ph: (888) 401-6367 x703 Cord King ........................................4 ..............................888-219-WOOD Item ID: JW-909632 Corley Mfg J......................................13 ............................... 423-698-0284 Contact: Williams CW ...........................................8, 10, 39 .................... 800-743-3491 Ph:Mill (888) 401-6367 x701 F&R Mfg. .........................................18 ............................... 800-355-1250 GoFast Manufacturing .................19 ............................... 800-854-7439 Great Lakes Mfg. ...........................19 ............................... 877-248-5677 Holtec ..............................................3 ................................... holtecusa.com Hurdle Machine Works Inc .........40 ............................... 901-877-6251 Hurst Boiler. ...................................14 ...............................

877-774-8778 ‘95 John Deere C6 Kilgore Saw Company ..................20 ............................... 888-857-5153 Tree Farmer L-M Equipment Company Ltd. ...1 .................................. 800-455-8807 Item ID: 13920 Lignomat .........................................19 ............................... 800-227-2105 Contact: Austin ‘13 KMC 2500 Track Lumbermens Buy, Sell, Trade......25 ...............................

888-401-6367 Ph: (888) 401-6367 x703 Skidder Lumbermens Wanted ...................37 ............................... 931-797-8029 Item ID: 14078 Lumbermens Web Store ..............34 ..............www.lumbermenco.com Contact: Austin Menominee Saw............................22 ............................... capacity!. Item ID800-582-0470 13421. Sam x702 Ph: (888) 401-6367 x703 Midwest Sharpening ...................21 ...............................

231-924-5953 BARKO Multitek North America, LLC .....16 ..................................

8002435438 1994 Barko 160B - Electric Northeast Implements, ............................... off onto a conveyor.

This Inc..........20 is a very knuckleboom, 30'607-589-6160 boom, 75hp Pantron Inc.ID............38 800-211-9468 well builtAutomati processor.on, Item 13820. ............................... motor, Rotobec continuous Piper’s Saw Shop..................... ......8 ..................................

800-845-6075 Sam x702 grapple, 5,000 original hours.

Row Electric....................................21 ...............................

800-248-4479 Firewood Processor - This is (excellent condition.). Item ID Ryan's Equipment ..........................10 ............................... a Chomper Model 16 PDA 13238. Chris x700989-427-2829 Smith Machine Worxprocessor ....................11 ............................... automatice firewood 1995 Barko 775 B 205-620-4455 Feller Buncher Smith Sawmill with John DeereService power ..................2 unit with ..................................

- Pumps recently 800-598-6344 redone. 400 hrs Tough Seats ....................................6 ..................................

855-579-0538 low hours. Control panel includes on injection pump. always started Woodlandia ....................................12 ...............................

877-508-8777 tach, oil pressure, water temp and good. in good working order. 22in PLEASE PRINT amp gauges.

Cuts logs up to 16”.

2023 kohing head.DECEMBER head works great.

you to Change your Address One If owner andneed comes with all Item ID 13185.

Sam x702 or

Addand Your Name to our1999 mailing list, manuals receipts.

Purchased Barko 160D - newthen engine with please complete this form and mail to:

new for $32,500. Item ID 13865.

Sam x702

approximately 1500 hours. Hour

Lumbermens™meter Magazine dont work. The last 2 owners 1116 W 7th St., Ste. 297 LOGGING EQUIPMENT have only used it to load trucks or Columbia, TN 38402

Handles logs up to 32”. Uses

BANDIT as a backup as needed. Has a CTR ❑ Please Add ❑ Please Change ❑ grapple Pleasehas Remove 1999 Bandit 1900 Tracked Disc delimber, been rebuilt.

but electronic option is available.

50% or better. 475 hp Cummins Item ID 13694. Sam x702 Company Name*: ________________________________________________________

made the best valued log splitter.

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under at required Boom have minor leaks. *Company nameCarriage and address to cylinders process your change.

Diesel. 7500 Hours. One owner.

94 Barko 275 - Excellent value

Individual Name: _________________________________________________________

Well maintained. Item ID 13294.

with low at hours at 3,500. 5.9

Address:________________________________________________________________

Sam x702

CUMMINS continuous grapple.

_______________________________________________________________________

2004 Bandit Beast Model 4680 -

Runs Great!. Item ID 13740. Sam

City: ___________________________________________________________________ 3412 Caterpillar Diesel engine x702 State: __________________________________________________________________ with 850 HP. 5300 hrs. Mill in BELL Zip:____________________________________________________________________ good condition. Just finished 10 1990 Bell Super T - This Bell has

Acre clearing job, ready to work! a brand new Duetz engine. Lever Phone: _________________________________________________________________

Remote control. Big production control, 33” bar, pump and tranny Email:__________________________________________________________________

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 39

LUMBERMENS™ MAGAZINE 1116 West 7th Street, Suite 297 Columbia, Tennessee 38401