Lumbermens November 2024 Magazine

F R E E

C L A S S I F I E D

L I S T I N G S

-

P G

6

NOVEMBER 2024 TM

pg.21>>

Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

P

IL L.S H

O

LIVI N

‘93 Barko 180B

Item ID: 14077 E WOO TH D Austin Contact: G Ph: (888) 401-6367 x703 SA

WM

P

TURBOSAWMILLS ARE IN STOCK

WM

FE! LI

‘16 Halverson H140 Skidsteer (DEMO)

SA

E WOO TH D

LIVI N

TURBOSAWMILLS ARE IN STOCK

G

FE! LI

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

IL L.S H

O

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

‘83 John Deere 4850

M10-28A: $29,900

chain conveyer, 8 way splitter, on

M10-28A - 4 In Stock

Item ID: 14073 20,000lb goose neck trailer. Item ID Contact: Austin Austin x703 Ph: 401-6367 x703 • (888) Single-end vertical13916. & horizontal sizing

M10-28A: $29,900 Best Value Portable Log Splitter

• 10” x 10” standard- Small cut manufacturer in PA has • 9”Easily x 20” double condition. produces high cut made the bestM10-28A: valued log $29,900 splitter. quality with patented ‘Cone’ (gross) Handles logs up to 32”. Uses • chips Honda Gas 30hp engine.

10-28A - 4 In Stock with 1700 hours, in very good

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

M12-28A: $35,000 Item ID 13185. Sam x702

M12-28A - 31999InBarko Stock 160D - new engine with

manuals and receipts. Purchased new for $32,500. Item ID 13865.

approximately 1500 hours. Hour

• x702 Single-end vertical &meter horizontal sizing M12-2 Sam dont work. The last 2 owners • 12” x 12” standard cut LOGGING EQUIPMENT have only used it to load trucks or BANDIT as needed.$35,000 Has a CTR M12-28A: • 11” x 24” double cutas a backup 1999 Bandit 1900 Tracked Disc delimber, grapple has been rebuilt.

• Honda Gas 30hp (gross) engine.

M12-28A - 3 In Sto

4 In Stock M12-28A Incylinders Stock drum design. M10-28A Can easily load 42’ - 13HP Honda motor. Manual start Chipper - Cat Under Carriage at - 3Boom have minor leaks.

-end vertical & horizontal sizing vans and produce 6 - 8 loads per but electronic option is available.

50% or better.

475 hp Cummins Item ID 13694. Sam x702 • Single-end vertical & horizonta • Single-end vertical & horizontal sizing •Jay Single-end &94horizontal sizing SAWMILL.SHOP | Call at (800) 598-6344 day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge Diesel.

7500 Hours.

Onevertical owner.

Barko 275 - Excellent value 10” standard cut • EDGERS 10” x &10” standard cut • 12” x 12” standard cut • 12” x 12” standard cut GANGS adjustable to single two way. Great Well maintained. Item ID 13294. with low at hours at 3,500. 5.9 • Saws 9” x- Two 20” double Brewco Brewco Saws cut Value! PA. Item ID 12062. Sam x702 Sam CUMMINS continuous grapple.

0” double cut •• x702 11” x 24” double cut 11” x 24” double cut in excellent condition.

Runs30hp great. (gross) Firewood Processor - This is a 2004 Bandit Beast Model 4680 Runs Great!. Item ID 13740. Sam • Honda Gas engine.

• Honda Gas 30hp (gross) engine. a Gas 30hp engine.

Item ID 13644. Sam (gross) x702 homemade processor with a 10’ 3412 Caterpillar Diesel engine x702 • Honda Gas 30hp (gross) engin FIREWOOD PROCESSORS

log deck. Has a hydraulic grapple,

BELL

with 850 HP. 5300 hrs. Mill in

SAWMILL.SHOP | offCall good Jay at (800) 598-6344 chain and kicker that all runs condition.

Just finished 10 1990 Bell Super T - This Bell has

2010 Shop Built Wood Processor

SAWMILL.SHOP | Call Jay at (800) 598-6344

- It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 441

of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Acre clearing job, ready to work!

Remote control. Big production

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 3

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

Grapple Assist for crooked logs

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

2019 Cord King Line-up

Email: info@cordking.ca Web: www.cordking.ca ‘13 KMC 2500 Track Skidder

‘95 John Deere C6 Tree Farmer Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

TOLL FREE 1-888-219-WOOD (9663) Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’

a Chomper Model 16 PDA

automatice firewood processor

Item ID: JW-986495 withsplitter John Deere power unit with • Wedge and Contact: J Williams design tolow hours.

Control panel includes suit your Ph: (888) 401-6367 x701

needs tach, oil pressure, water temp and • 24 to 72 ton splitting amp gauges.

Cuts logs up to 16”. capability One owner and comes with all chain conveyer, 8 way splitter, on • trailer.

The splitting 20,000lb goose neck Itemfastest ID manuals and receipts. Purchased cycle time on the 13916. Austin x703 new for $32,500. Item ID 13865. planet. Sam x702 Best Value Portable Log Splitter

Facts to consider:

- Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

1. Pioneered N. America’s first commercialChipper firewood processor in the mid 70’s 13HP Honda motor. Manual start - Cat Under Carriage at Boom cylinders have minor leaks.

drum design. Can easily load 42’

vans and produce 6 - 8 saw loads per but electronic optionM1820, is available.M2030 50% orand better.M2430 475 hp Cummins 2. 3 Bar models available day. Item ID 13882. Austin x703

Has Log Lift. Uses 4-way wedge

Diesel. 7500 Hours. One owner.

Brewco Saws - Two Brewco Saws

Value! PA. Item ID 12062. Sam x702

Sam x702

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

3. 7 Slasher Available Model 40, 44, 44HO, 48, 54 & 60 EDGERS & GANGS Saw Models adjustable to single two way.

Great 36, Well maintained.

Item ID 13294. with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

4. The Most productive machine on the planet, proven and guaranteed Firewood Processor - This is a 2004 Bandit Beast Model 4680 Runs Great!. Item ID 13740. Sam

in excellent condition. Runs great.

Item ID 13644. Sam x702

homemade processor with a 10’ 3412 Caterpillar Diesel engine x702 5. Go to our web site for live action video and details www.cordking.ca FIREWOOD PROCESSORS log deck. Has a hydraulic grapple, with 850 HP. 5300 hrs. Mill in BELL 2010 Shop 6.

Built Wood Processor chain andjoystick kicker that all runs off good condition. Just finished 10 1990 Bell Super T - This Bell has Available with single control - It has a 353 Detroit diesel, 40

of a 4 cylinder Mercedes power

Acre clearing job, ready to work!

a brand new Duetz engine. Lever

7. Exclusive lifetime splitter warranty and Remote 1 year bumper to bumper warranty. control. Big production control, 33” bar, pump and tranny unit. Has a 4’ chain saw that kicks

inch insert tooth circle saw, 30 foot  Issue 364 441

Lumbermens™  since 1986

❘

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

PleAse PrINt

Pulleys on Bearing . Parts Book and

belted rollcase to clear slabs and

12846. Sam x702

short pop-up transfer to edger,

where to order included. Item ID

cuts from sawline, log stop and

Zip

❑ Please Remove

loader to drop logs onto carriage,

Precision 58 Chip Pac - Single chute

stop and loader to deal with big

Sam x702

loading system,. Item ID 12764.

heavy duty log turner under log

EST

logs onto carriage and track and

Email

State

www.starwebhosting.net/woodsmen/ frame. Significant new spare parts to be negotiated separately. Item ID

The Tree that Started it All!

Trelan Chipper - This is a remote

chipper that has been totally rebuilt with about 840 hours except for the

BANDMILLS & HEADSAWS DealS Month SOUTHWEST FOREST PRODUCTS EXPO Danckaert Band Resaw - Roughly Fri, 25 August Sat, 26 August From ApriL TA B L E O F C O N T E N T S of the

13198. Sam x702

Manual Four Head Block - Manual Four Head Block Mounted on

all steel carriage. Husk. Manual Hot Springs, Arkansas www.arkloggers.com

'12 WoodmIzer LT 40

City

❑ Please Change

FOR CLASSIFIEDS Call 888.401.MENS TM CHIPPERS See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at L I S T New S York ELL EXCHANGE BUY SAVE 1986 Boonville, www.LumberMB\ISmagazine.com blades and 1 spare 36" blade),

DEPARTMENTS

V-12 Caterpillar power unit. New clutches, disc, bearing, liners and

custom chute. 23” in opening and V-12 Cat with 750-800 hp rating.

10 hours on this machine since it

has been rebuilt, it has a 24foot in

EquipmEnt REpREsEntativEs EST 1986

deck 20 foot out feed deck cAll uS todAy All youR uSed 72ND ANNUAL GREAT LAKES foR feed equiPMent with needS! 44 inch wheels, and all the Since 1986, Lumbermens has LOGGING & HEAVY EQUIPMENT EXPO published a monthly circular FREE LISTINGS ..........................6 Thurs, 7 Sept Sat, 9 Sept bells and whistles, its a production fREE EquipmEnt listings!

Call –

❑ Please add

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

LIST SELL EXCHANGE BUY SAVE Escanaba, Michigan(888) 401-6367 machine, with air strain conveyers

that go up and down, with airbags,

Individual Name

Company Name*

MID-ATLANTIC LOGGING & BIOMASS SAFETY ALERT ..........................20 Morris Fri, 15 Sept - Sat, 16 Sept Phone

Address

PUBLISHER

Woods Publishing

LIST

SELL

EXCHANGE

item id: 14061 contact: Austin x703

BUY

SAVE

it includes two sets of Mcdonough Chris

EST

1986 AD Sales 2012 JoHn deere Selma, North Carolina 548G3 (888) 401-6367 www.midatlantic-logging-biomass­ MID-ATLANTIC expo.com/ Ext. 704 LOGGING & BIOMASS EXPO

pressure guides. Top Casting wheel

(888) 401-6367

DEALS OF THE MONTH .........21 ADVERTISING SALES *Company name and address required to process your change.

If you need to Change your Address or Add Your Name to our mailing list, then please complete this form and mail to:

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Lumbermens Magazine

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Reduced PRice item id:14021 contact: Sam x702

FAbTeK 344b

P.O. Box 1916 Columbia, TN 38402

Donna Heninger

✁

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

feet a minute also has CLT presses.

ext. 700 chris@lumbermens.co

Lexington, Kentucky http://www.kfia.org/ Sam KentuckyWoodExpo.aspx (888) 401-6367

item id: 14061 contact: J Williams x701

For classifieds Call toDay (888) 401-6367

Item ID 13876. Austin x703

Austin S & W 125 Band Mill with

(888) 401-6367 Caterpillar generator - Low hours

❘

Walker

(888) 401-6367 Ext. 707 ❘

walker@lumbermensco.com

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Bell's Machining ..................... 27 Brute Force Mfg. ..................... 31

Buck Equipment (AIM) ........ 36 Send address changes to: SUBSCRIPTION: Lumbermens™, a trade newspaper for the logging, Lumberman's Exchange Mfgwood .............................. sawmilling, manufacturing, andCorley secondary manufacturing32 P.O.pallet Box 1916 industry, is freeTN within the United States to qualifying manufacturers Columbia, 38402 CRD Metalworks ....................

25 and industry suppliers. Please limit your subscription to one free copy per company orExchange mill locatiison.

The Lumberman's CW Mill-ArmorHog .............. 17

published monthly

by Woods Send address changes to Lumbermens™ CHANGE OF ADDRESS: CW Mill-Hogzilla ................... 15 Publishing, Box 1916, Magazine,P.O. 1116 W. 7th St., Ste. 297, Columbia, TN 38401. When Columbia, TN 38402. All rights possible, please include an old addressDyna label. Products ........................ 35 reserved. All editorial/ advertorial REPRODUCTION AND Adverti sers are................... responsible 8 submissions are used at the RESPONSIBILITY: Empire Hydraulics discretion of the publisher and may for the contents and claims of their advertising. Lumbermens™ accepts beno edited for purposes of their clarityclaims. No Great Lakes Mfg. .................... responsibility for part of this publicati on may be34 and space. Although all efforts reproduced or transmitt edhave in any form or by any means, electronic Hahn Machinery ...................... been to ensure accuracy photocopying, of or made mechanical, including recording or any information 3 content submitted by advertisers storage retrieval system, without Hurst permission of Lumbermens™.14 Boiler ............................. and writers, the Lumberman's Negatives, artwork, and other items submitted for publication in Exchange, its principles and Iron Bull Lumbermens™ are the property of adverti sers....................................

Lumbermens ™ owns21 associates, are not held liable for material typeset and/or designed by Lumbermens ™ and reserves the errors or omissions. Reproduction, Kilgore Saw ............................. 22 use outside ofwith­ Lumbermens™. Lumbermens™ will exercise in right wholeto orits part, is prohibited precauti on in writing, designing,Lignomat and printi................................. ng material contained 24 outevery written consent. within. We shallWoods not bePublishing liable for omissions or typographical errors. ©2017

- USED FORESTRY EQUIPMENT FOR SALE

❘

works,1 1/2" or 2" band, 22ft. track austin@lumbermensco.com Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434.

Austin Woods Phone: (888) 401-6367 ext. 703 austin@lumbermens.co

 liSt  Sell  exchange  buY  Save

Baker ...................................... 5, 7

on the703 mill, electronic computer Set Ext.

Cambridge, Ohio www.ohioforest.org

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703  austin@lumbermens.co Issue 364 lumbermenS  Since 1986

MAILING ADDRESS

in ve1y good condition, Cuts 130

Morris Woods, Ad Sales Phone: (888) 401-6367 ext. 704 morris@lumbermens.co

Ext. 702 THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct sam@lumbermensco.com

DESIGN DIRECTOR EQUIPMENT REPS

is an extremely accurate machine

chris@lumbermensco.com

morris@lumbermensco.com

KENTUCKY WOOD EXPO chris Woods Fri, Sept - (888) Sat, 16401-6367 Sept AD DIRECTORY ........................38 15Phone: MARKETING DIRECTOR

is supported on both sides. This

Ext. 700

Sam x702 Joe

Sam Wall Phone: (888) 401-6367 ext. 702 sam@lumbermens.co

CARRIAGES & DRIVES

(888) 401-6367 2010 Cardinal HD Carriage Ext. 709 Carriages lumbermenSmagazine.com (Sawmill) - Cardinal joe@lumbermensco.com

Carriage line it includes carriage

with onboard log turners, carriage

drive, hyd pac for carriage, Julie Menominee Saw .....................

29 sawyers cab, computer controls, 401-6367 cabinet with electronic drives for Metal Detector's Inc(888) . ..............

30

Ext. 701 Midwest Sharpening.............. 26

carriage knees, husk including

julie@lumbermensco.com 48" bottom saw and 36" top saw

Morbark ..................................... 9

STACKING The Tree that RACit All! Started

Multitek ................................... 12

Piper's Saw Shop.................... 13

Rotochopper............................ 40

Row Electric ............................ 20

Sawmill Exchange .................. 11 Since 1986, Lumbermens™ has pub lished a month ly circular Select Sawmill ......................... 19 reaching sawmills, loggers, pallet makers, recyclers and industrial woodSawmill working........................... plants worldwide.

Smith 4 PUBLISHER The Paul Bunyan Show ......... 39

AD SUBMISSIONS May be sent to— morris@lumbermensco.com

Woods Publishing

Thomas Industrial Controls..... 10 DESIGN DIRECTOR

Union Grove Saw & Knife.. 2, 37 Ted Monnin Universal Refiner ................... 23

MAILING ADDRESS 1116 W. 7th St., Ste. 297 • Columbia, TN 38401 WoodMizer ................................ l (888) 401-6367

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

POSTMASTER Send address changes to: Lumbermens™ Magazine 1116 www.BakerProducts.net W. 7th St., Ste. 297 • Columbia, TN 38401

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 5

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘93 Barko 180B

‘16 Halverson H140 Skidsteer (DEMO)

LOGGING

INT'L CABLE SKIDDER It’ll come with brand new tire chains on it, Everything still works as it should, Gears shift smooth, engine has no blow-by’s, No leaks, been well maintained, Starts right up and goes to work, He’s an old man, but could have videos available for those that can’t go look at it. One owner only, and he’s retiring. A few of the good ones left out there, Delivery

available as well. Buyer pays for trucking, About 200mi east of Cincinnati OH Item ID 5568. Joe x709 TIMBERJACK 208 208 Timberjack for sale, skidder is pretty solid all around, has a couple leaks, but motor fires right up every time. Has new starter, everything else on it works like it should.

Item ID 5320. Austin x703

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

Item ID: JW-909632 Contact: JOHNJ Williams DEERE 540D Ph: (888) 401-6367 John Deere 540Dx701 cable.

JOHN DEERE 440C John Deere 440C for sale, Skidder has a brand new motor in it, along with new clutch, new pressure plate, and new radiator, and rebuilt steering box. Winch was recently rebuilt as well.

Skidder is tightDeere and dry,C6 and ‘95 John will come with a full set of Tree Farmer ice chains. Call/email for Item ID: 13920 more information.

Contact: Austin Item ID 5242.

Austin x703 Ph: (888) 401-6367 x703

Skidder has new transmission, new hydraulic pump, and all of the cylinders were recently repacked. Has 23.1 tires all around and comes with new set of bear claw chains. This Skidder has been a dependable machine, and is currently in the woods working daily.

‘13 2500 ItemKMC ID 5249.

AustinTrack x703

Skidder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

56IDor13421.

74 HP capacity!. Item Sam x702 diesel engine options

BARKO

1994 Barko 160B - Electric

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter

FIREWOOD PROCESSORS

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT made the best valued log splitter.

BANDIT TImberwolf Pro-HD Series Firewood Processors - Small manufacturer in PA has Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

TImberwolf Pro-HD Series Firewood Processors

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great New

All or Value! f 4! PA. Item ID 12062. Sam x702 202ew

All N in excellent condition.

Runs great.

Firewood Processor - This is a for 4!

Optional Integrated Conveyor 202 Dual Roller Feed System Powered rollers assist in feeding the gnarliest logs Easily transport machine to processing site to be ItemOptional ID 13644.

Sam x702 homemade processor with a 10’ Integrated Conveyor Dual Roller System up to 24” Feed in diameter processing wood in minutes!

Easily transport machine to processing site to be processing wood in minutes!

a Chomper Model 16 PDA

log deck. Has a hydraulic grapple, Powered rollers assist in feeding the gnarliest logs up to 24” in diameter

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 8 Foot Live Deck4680 long by 12’ wide live deck, available in 3412 8’Caterpillar Diesel engine 83 orFoot Live Deck 5 strand configurations

with 850 HP. 5300 hrs. Mill in

8’ long by 12’ wide 3-strand live deck, available in 3 or 5 strand configurations

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.).

Item ID 56 or 74 HP

diesel engine options

13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!.

Item ID 13740. Sam 16’ Feed Trough logs in excess of 32’ in length x702Process 16’ with Feed assist of Trough back roller

BELL

Process logs in excess of 32’ in length with assist of back roller

2010 Shop Built Wood Processor chain and kicker that all runs off good condition. Just finished 10 1990 Bell Super T - This Bell has Starting at Financing Available Financing Available - It has a 353 Detroit diesel, 40 Acre clearing job, ready to work! a brand new Duetz engine. Lever of a 4 cylinder Mercedes power sales@timberwolfequip.com www.timberwolfequip.com Machines In Stock at our Network of Dealers sales@timberwolfequip.com across North America inch insert tooth circle saw, 30 foot Remote control. Big production control, 33” bar, pump and tranny unit. Has a 4’ chain saw that kicks www.timberwolfequip.com

(607) 307-4029 (607) 307-4029

$89,995.95

 Issue 364 441

Lumbermens™  since 1986

❘

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

MID-ATLANTIC

LOGGING & BIOMASS EXPO

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

SPECIAL FINANCING OFFER MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co Donna Heninger

on the mill, electronic computer Set

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

BUY NOW PAY works,1 1/2" or 2" band, 22ft. track LATER! Caterpillar generator - Low hours

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR

MAILING ADDRESS

Item ID 13876. Austin x703

S & W 125 Band Mill with

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls,

ONLY APPLIES WITH Bell's Machining ..................... 27 Metal Detector's Inc. .............. 30 Brute Force Mfg. ..................... 31 Midwest Sharpening.............. 26 APPROVED CREDIT POSTMASTER Buck Equipment (AIM) ........ 36 Morbark ..................................... 9 Send address changes to: Lumberman's Exchange Corley Mfg .............................. 32 Multitek ................................... 12 TODAY P.O. Box 1916 GET APPROVED AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

Columbia, TN 38402

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

cabinet with electronic drives for carriage knees, husk including 48" bottom saw and 36" top saw

STACKING RAC

Dyna Products ........................ 35 Sawmill Exchange .................. 11 Get the equipment you need now and defer payments for Empire Hydraulics ................... 8 Select Sawmill ......................... 19 Lakes Mfg. ....................

34 Smith Sawmill ........................... 4 3Great months!

Call 989-823-6200 Hahn Machinery ...................... 3 The Paul Bunyan Show ......... 39 www.dyna-products.com Hurst Boiler ............................. 14 Thomas Industrial Controls..... 10 Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 7

Phone 315.284.4126 FaxCummins, 90′ TIMBERJACK 240A 4 speed Clark 315.849.2045 1990 Timberjack 240AWebsite Transmission 4 forward, 4 www.empirehyd.com cable Skidder that’s working reverse, chains all around, Email daily.

Has a Pressure” 5.9 cummins new cable, new steering pins, “Precision Under info@empirehyd.com

engine. Both the engine and transmission were rebuilt in 2021 with paperwork showing the work. Winch transfer case was also rebuilt shortly after. Pins and bushings are all tight, and is woods ready. Call/ Email for more information.

Item ID 5082. Austin x703 1996 TIMBERJACK 380C 1996 Timberjack 380C 5.9

have new center pins in box current pins are fine. Minor leaks, good running machine.

Item ID 4825. Austin x703 02′ JOHN DEERE 640G2 2002 John Deere 640G2 Cable skidder with 14000 frame hours, has new motor in it with less than 200 hours on it, and the transmission was rebuilt around the same time. Has all new bearings in the front end, as well

as a new seat, new gauges, new heater, new glass, and new lights.

Has 23.1’s on it with brand new chains on the front. On a job now. Call for more info.

Item ID 4710. Austin x703

‘1686′Halverson H140 TIMBERJACK 230A Motor rebuilt about 10 hrs ago, Skidsteer (DEMO)

Same withJW-909632 brakes and new Item ID: clutch / pressure plate (10hrs Contact: J Williams ago), This is in good Ph: (888) 401-6367conditi x701 ons, NOT old junk. It’s good to go to work, Owner for 10+yrs, and used for jobs here and there, been the family skidder, Can take videos of it if you can’t go

look at it, Can help trucking it anywhere in the US, About 80mi south of Baltimore, MD Item ID 3605. Joe x709 FRANKLIN 170 SKIDDER ‘93 Barko 180B Detroit 453 engine, Powershift, 14077 4 Item speed,ID: Winch works well, Tires Contact: Austinsection good, size: 23.1, Center Ph: and (888) 401-6367 Runs operates as itx703 should Item ID 3517. Joe x709 98′ JOHN DEERE 640E 1998 John Deere 640E cable skidder with 10000 original hours, this skidder was bought directly from the original owner/ operator. Everything works like it should. Call for more info.

‘95 John Deere C6 Item ID 2701. Austin x703

Tree Farmer

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 441

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

98′ JOHN DEERE 640G Item ID: 13920 98ʹ Model John Deere 640G Contact: Austin with 10000401-6367 original x703 hours, Ph: (888) very straight skidder that was bought from the original owner/operator, everything capacity!. Item ID 13421. Sam x702 works like it should. Call for more info. BARKO 1994 Barko 160B -Austi Electric Item ID 2694. n x703 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and 22, of 25, 38 HP at Location allor equipment engine options www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

MID-ATLANTIC

LOGGING & BIOMASS EXPO

DESIGN DIRECTOR Donna Heninger

AD SUBMISSIONS

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

works,1 1/2" or 2" band, 22ft. track

www.ohioforest.org

hours ready to run. Item ID 13434.

OhioProcessors Timberwolf Pro-MP SeriesCambridge, Firewood

Cat 3406 140KW Genset, 12,400 Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

that go up and down, with airbags,

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

MAILING ADDRESS

bells and whistles, its a production machine, with air strain conveyers

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

feed deck 20 foot out feed deck with 44 inch wheels, and all the

Escanaba, Michigan

Woods Publishing

EQUIPMENT REPS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

May be sent to­ Bell's Machining ..................... 27 Ultimate Power for Unrivaled Productivity morris@lumbermens.co 4” or 5” cylinder bore, equipped with manual autocycle to 31 Brute Force Mfg. .....................

POSTMASTERhandle the gnarliest logs Buck Equipment (AIM) ........ 36 Send address changes to: Lumberman's Exchange Corley Mfg .............................. 32 P.O. Box 1916 Columbia, TN 38402 CRD Metalworks .................... 25

Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls,

cabinet with electronic drives for Metal Detector's Inc. ..............

30 Logs Process Large Quickly carriage knees, husk including Overbuilt frame, patented driven top roll clamping system, and Midwest Sharpening.............. 26 back roller allows for processing logs 32’ long and 24” wide 48" bottom saw and 36" top saw Morbark ..................................... 9

STACKING RAC

Multitek ................................... 12 Piper's Saw Shop.................... 13

The Lumberman's Exchange is CW Mill-ArmorHog .............. 17 Rotochopper............................ 40 published monthly by Woods CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 Publishing, P.O. Box 1916, Columbia, TN 38402. All rights Dyna Products ........................ 35 Sawmill Exchange .................. 11 reserved. All editorial/ advertorial submissions are used at the Empire Hydraulics ................... 8 Select Sawmill ......................... 19 discretion of the publisher and may be edited for purposes of clarity Great Lakes Mfg. .................... 34 Smith Sawmill ........................... 4 and space. Although all efforts have Hahn Machinery ...................... 3 The Paul Bunyan Show ......... 39 been made to ensure accuracy of Split 2+ cords of premium firewood per hour 6’ long by 12’ wide 3-strand live deck, stores Weighing in at just 5500 lbs, Pro-MP processors content submitted by advertisers utilizing standard 4-way optionalIndustrial 6-way wedges vertically can be towed easily by any half-tonHurst truck Boiler .............................

14 orThomas Controls ..... 10 with stow bar during transportation and writers, the Lumberman's Exchange, its principles and Iron Bull ................................... 21 Union Grove Saw & Knife.. 2, 37 associates, are not held liable for errors or omissions.

Reproduction, Financing AvailableKilgore Saw ............................. 22 Universal Refiner ................... 23 in whole or part, is prohibited with­ www.timberwolfequip.com www.BakerProducts.net Lignomat ................................. 24 WoodMizer ................................ l sales@timberwolfequip.com out written consent.

800.S48.6914 I S73.663.7711 ©2017 Woods Publishing

2 Full Cords per Hour

Mobile Processing

Hydraulic Live Deck

(607) 307-4029

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

❘

 (888) 401-MENS L!

NO. 9

Phone 315.284.4126 Faxhours ago, motor is strong with JOHN DEERE 440C’S PACKAGE DEAL 315.849.2045 no blow by. Tight and has been Website Up for sale are two John Deere well maintained. Call/Email for www.empirehyd.com Email 440C Cable skidders, one is in more information.

“Precision Under Pressure” info@empirehyd.com

great shape, winch just totally rebuilt and and working daily.

The other has the transmission out of it, the trans has been rebuilt, but has not been put back in the skidder. Call for more info.

Item ID 1966. Austin x703 1983 JOHN DEERE 640C John Deere 640C grapple skidder, has rebuilt transmission less than 200

Item ID 5582. Austin x703

FMC 210 FMC 210 CA 5250 track skidder, needs the transmission rebuilt. It has a 653 Detroit motor in it with low hours. Skidder was refurbished in 1089 used in a handful of logging jobs in the early 90’s followed by light service in shot in 2018. Call/Email for more

information.

Item ID 5526. Austin x703 CAT 225LC EXCAVATOR Cat 225 machine starts right up, and has no big leaks. Will include a 28” and 48” bucket, ‘16will Halverson H140 also include set of grapples.

Call for more informati on.

Skidsteer (DEMO) Item ID: ID 5419.

Austin x703 Item JW-909632

Contact: J Williams JOHN DEEREx701 335 Ph:06′ (888) 401-6367 LOG LOADER Motor has brand new pump.

Does not smoke at all, New manifold, Brakes and lights all work, A/C – heat work

well, Machine is dry, has no leaks, Boom is strong. Fast loader, Turn bearings are good, Owner’s health is causing him to sell it, Delivery available as well. Buyer pays for trucking, ‘93 70mi Barko 180B About west of Orlando FL Item ItemID: ID 14077 5403. Joe x709 Contact: Austin Ph:TAJFUN (888) 401-6367 x703 EQUIPMENT Lumbermens is a proud dealer for Tajfun equipment, from logging winches, to cranes, to firewood processors, Tajfun machinery makes high quality equipment. Call us for more information and a competitive quote today!

Item ID 5368. Austin x703

‘95 John Deere C6 2022 TIGERCAT Tree Farmer620H

off onto a conveyor. This is a very

2022 Tigercat 620H ItemModel ID: 13920 grapple skidder Contact: Austin with 660 original hours, has x703 bogie Ph: (888) 401-6367 grapple on it. 35ʺ tires, and Canadian light package, and camera in front on the capacity!.

Item ID Sam x702 grill.

Skidder is 13421. in excellent BARKO shape. Call/Email for more informati on.160B - Electric 1994 Barko Item ID 5334. x703 knuckleboom, 30'Austi boom,n 75hp

Sam x702

grapple, 5,000 original hours.

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

well built processor. Item ID 13820.

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 441

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 11

Phone 315.284.4126 Faxworks like it should.

TIMBERJACK 1010 315.849.2045 Timberjack 1010 double bunk Item ID 5320. Austin x703 Website forwarder, machine has around www.empirehyd.com 15000 frame hours, and hasEmail CAT 538 “Precision Under Pressure” info@empirehyd.com

had a lot of recent work done to it. That work includes: New Reman Perkins engine, New Radiator, Rebuilt Clark 3 speed tranny, Brand new bushings and pins in center section, rebuilt cylinders in boom and in the steering, New set of sure grip grapples, new seals in driveline. It will come with a set of eco tracks for the back, and set of wheel track for the front which are brand new.

This is a straight machine that is not bent or busted up. It has had the same owner/operator since it had 6000 original hours on it. Owner is only selling to retire. Call/Email for more information.

Item ID 5358. Austin x703

2020 Cat 538 log loader with 2800 hours on it, still has warranty available. Working daily. Call for more information.

Item ID 5302. Austin x703 TIMBCO 445EXL Timbco 445Exl with 8500 original hours, in excellent condition. Machine has been well maintained and serviced.

Needs nothing, working daily. Call/Email for more information.

Item ID 5293. Austin x703

2016 TAJFUN 400 JOY 2016 Tajfun 400 Joy firewood processor, unit includes log lift, and outfeed conveyer. Machine has been a one owner/one operator unit since new and 13428 Victory Ln. 208 // PO Box 124 TIMBERJACK is in excellent condition. Call/ Adams Center, NYskidder 13606 Email for more information.

208 Timberjack for sale, is pretty solid all around, has a Item ID 5227. Austin x703 couple leaks, but motor fires right up every time. Has new TIMBERJACK 1270 starter, everything else on it 2003 Timberjack 1270 Processor,

machine is working daily and is averaging 300 cords a week currently. Owner is only selling to upgrade to a brand new machine. Recent work includes a new ECU, new injectors, new fuel pump, new fuel lines, new ‘16 Halverson H140 wiring harness, new chip, new rear window, (DEMO) all new head Skidsteer cylinders, and pins/bushings, Item ID: JW-909632 new encoders, and new seal Contact: J Williams kits.

Head is super tight and Ph: (888) 401-6367 x701 has a new measuring wheel, and new rotator. Everything on the machine works as it should and currently has 24000 hours.

Item ID 5199. Austin x703 PRENTICE 210B 210B Prentice Knuckleboom, comes with reversible csi bucksaw. Works everyday, has joystick control, all new ‘13 KMC 2500 Track hoses on the boom, brand new Skidder grapple as well. Pretty tight and good loader. Only thing it Item ID: 14078 does need Austin is brakes.

Contact: Item ID 5085.

Austix703 n x703 Ph: (888) 401-6367 LIEBHERR A312 WITH RYANSThis HEAD off onto a conveyor. is a very 1998 Model Liebher A312

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is a Chomper Model 16 PDA

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 441

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

3-5

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

mobile wheeled excavator with 9300 hours, equipped with newer Ryans saw head attachment. Both in good condition, the excavator has all new hoses, good tires, new ‘93 and Barko lights, back up180B camera. The Item head ID: 14077 Ryans has low hours as Contact: Austin well.

Ph: 401-6367 Item(888) ID 4979.

Austinx703 x703 13′ BARKO 595ML MAGNUM 2013 Barko 595 Magnum loader has 11000 original hours, equipped with 264 Csi delimber. Recently had two of the pumps rebuilt. Good, solid loader everything on it works John Deere as‘95 it should.

Call/EmailC6 for more informati on.

Tree Farmer Item 4974.

Austin x703 ItemID ID: 13920

Contact: Austin 18′(888) JOHN DEERE 753J Ph: 401-6367 x703 2018 John Deere 753J with 6000 original hours. Ready to work, only selling to downsize. capacity!.

ID 13421. Samand x702 Has goodItem undercarriage, BARKO hotsaw head. Call/Email for more informati 1994 Barko 160Bon. - Electric Item ID 4968. x703 knuckleboom, 30'Austi boom,n 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 13

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

BELL SUPER T CUTTER Bell Super T 3 wheel machine, has the deutz air cooled engine, with a 30” dangle head.

Inside the cab it has levers for controls, and does also have air conditioning. Tires are size 28L ‘16will Halverson H140as and come with chains well.

Overall in good condition, Skidsteer (DEMO) and ready to work. Call/Email Item ID: JW-909632 for more informati on.

Contact: J Williams Item ID 4952.

Austi n x703 Ph: (888) 401-6367 x701 CAT D5H TSK Cat D5h TSK track Skidder with 3700 original hours, 32” pads, and good undercarriage at around 80%. Ready to work.

Call/Email for more information.

Item ID 4939. Austin x703 643J 2007 643J cutter with 12,700 ‘13 KMC 2500 Track hrs, thinning saw head, 28LX26 tiSkidder res, new starter,batteries, alt, gear rebuilt, motor runs Itembox ID: 14078 great usesAustin no oil, does have Contact: aPh: Hydraulic leak or x703 2, needs (888) 401-6367 a bushing in one of cylinder arms, also comes with a 843J parts machine, hasThis a tpost saw off onto a conveyor. is a very head,motor and Hydraulics are

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

vans and produce 6 - 8 loads per

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 441

adjustable to single two way. Great

Well maintained. Item ID 13294.

Lumbermens™  since 1986

❘

(excellent condition.). Item ID

good. in good working order. 22in

50% or better. 475 hp Cummins

Firewood Processor - This is a Rotary Dryers homemade processor with a 10’ Sand Dryers log deck.

Has a hydraulic grapple, Grain Dryers Lumber chain andKilns kicker that all runs off Cement Kilns of a 4 cylinder Mercedes power Brick Kilns unit. Has a 4’ chain saw that kicks

grapple, 5,000 original hours.

tach, oil pressure, water temp and

low hours. Control panel includes

but electronic option is available.

Value! PA. Item ID 12062. Sam x702

motor, Rotobec continuous

- Pumps recently redone. 400 hrs

Has Log Lift. Uses 4-way wedge

quality chips with patented ‘Cone’

725B TIMBERPRO Well Maintained machine, tight capacity!.

Itemready ID 13421. x702 and dry work withSam a Rolly BARKO II head. make an offer! Call for more pictures.

1994 Barko 160B - Electric Item ID 1398. n 75hp x703 knuckleboom, 30'Austi boom,

with John Deere power unit with

day. Item ID 13882. Austin x703

condition. Easily produces high

TIMBCO 425D Timbco 425D – Year 2001 – Quadco 20 360 degree head – John Deere 8.3‘95 Cummins – Hours 7000 /C6 300 hours on caterpillar undercarriage Tree Farmer – new planetary spindle. bearings Item ID: 13920 andContact: one seals Austin in both sides.

Item ID 1429.

Austin x703 x703 Ph: (888) 401-6367

automatice firewood processor 1995 Barko 775 B Feller Buncher Clean-Burn Design

drum design. Can easily load 42’

with 1700 hours, in very good

04′ TIGERCAT 620 2004 Tigercat 620 Tigercat Grapple skidder has brand new ‘93 Barko engine in it, with 180B less than 10 Itemon ID:it,14077 hours and comes with a Contact: Austin year warranty.

Machine itself (888) 401-6367 is Ph: prett y tight, speed x703 control valve is new, main pumps are fairly new as well. Has heat/Ac, every function on the skidder works. Call for more info.

Item ID 4705 . Austin x703

Innovative 13238. Chris x700

a Chomper Model 16 PDA

amp gauges. Cuts logs up to 16”.

Manufacturing a full line of biomass fired One chain conveyer, 8 way splitter, on combustion systems backed with fifty years of owner and comes with all 20,000lb goose neck trailer.

Item ID manuals and receipts. Purchased innovative clean-burn design. Diverse in every way with multi-fuel blending capability.

Hurst 13916. Austin x703 new for $32,500. Item ID 13865. stokers utilize hundreds of common and Sam x702 Best Value Portable Log Splitter abundant solid biomass fuels.

- Small manufacturer in PA has Large or small scale, project LOGGING EQUIPMENT management is eased with the made the best valued log splitter.

BANDIT impressively short installation time Handles logs up to 32”. Uses 1999 Bandit 1900 Tracked Disc required with prefabricated 13HP Honda motor. Manual start Chipper - Cat Under Carriage at modular components.

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

good 30k for both Item ID 4907. Austin x703

Diesel. 7500 Hours. One owner.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

on injection pump. always started kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

50

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

YEARS control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

CARRIAGES & DRIVES

LINK** Carriages (Sawmill) - Cardinal Field Proven Design forINFO the Independent Hardwood Sawmill MAILING ADDRESS

2010 Cardinal HD Carriage

Carriage line it includes carriage

B & B Mfg . ...............................

18 M&F Gauge ............................. 28- Two proven P.O. Box 1916 • Corley lnfeed and Edger with Lewis Optimization with onboard log turners, carriage Columbia, TN 38402-1916 B. H. Payne .............................. 16 Meadows Mill, Inc. ................ 33 drive, hyd pac for carriage, (888) 401-6367 names with proven results Menominee Saw .....................

29 Baker ......................................

5, 7 sawyers cab, computer controls, AD SUBMISSIONS May be sent to­ cabinet with electronic drives for • True HardwoodBell's Optimization Machining ..................... 27 Metal Detector's Inc. .............. 30 morris@lumbermens.co carriage knees, husk including Brute Force Mfg. ..................... 31 Midwest Sharpening.............. 26 • Small footprint that fits inside most existing mills POSTMASTER 48" bottom saw and 36" top saw Buck Equipment (AIM) ........ 36 Morbark ..................................... 9 Send address changes to: Exchange •Lumberman's Value priced with allMfgof.............................. the optimization capability12 of more Corley 32 Multitek ...................................

P.O. Box 1916 Columbia, TN 38402 CRD Metalworks ....................

25 Piper's Saw Shop.................... 13 elaborate high speed Edger Optimizers

STACKING For more information on our new "M" Series Edger RAC and

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

other Corley and Lewis products, give us a call.

LEWIS CONTROLS CORLEY SAWMILL OPTIMIZATION MACHINERY Chattanooga, Tennessee Iron Bull ................................... 21

Kilgore Saw ............................. 22 Phone 423-698-0284 Lignomat ................................. 24

www.corleymfg.com

- USED FORESTRY EQUIPMENT FOR SALE

❘

Cornelius, Oregon

Union Grove Saw & Knife.. 2, 37

Phone 503-648-9119

Universal Refiner ................... 23

www.BakerProducts.net

WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY l§

www.lewiscontrols.com 800.S48.6914 I S73.663.7711 ❘

 24/7 SUPPORT 0

❘

 (888) 401-MENS L!

NO. 15

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

IntegrIty • PrecIsIon • QualIty • Value ‘93 Barko 180B

Woodmaster

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

Item ID: JW-909632 See why Jwe are your BeSt Source for bandsaw blades!

Contact: Williams Ph: (888) 401-6367 x701

We offer the highest quality welds and our people use the highest level of integrity and precision to give you the best bandsaw blades in the business—we ship all over the US. Satisfaction always guaranteed!

‘95 John Deere C6 BandFarmer saw Blades Tree

thIn Kerf

‘13 KMC 2500 Track Skidder

LUMBERMEN’S

W

Ite Co Ph

Item ID: 13920 Contact: Austin Ph: (888) x703 Ask401-6367 About Our

LUMBERMEN’S Equipment Digest

Dismanteling Blades Item ID: 14078 PO Box 1146 Contact: Austin Columbia,capacity!.

TN 38402-1146 Item ID 13421. Sam x702 Ph: (888) 401-6367 x703 1-800-477-7606 Fax (931) 388-3564

13428 Victory Ln. // PO Box 124 Equipment Adams Center, NY 13606 Digest

BARKO www.lumbermenonline.com 1994 Barko 160B - Electric

1-888-857-5153

eck a conveyor. This is a very Chonto off knuckleboom, 30' boom, 75hp Out Our Quality • Our Service • Our Price well built processor. Item ID 13820. motor, Rotobec continuous

grapple, 5,000 original hours.

a Chomper Model 16 PDA

13238. Chris x700

Item Con Ph:

- Pumps recently redone. 400 hrs

1379

good. in good working order. 22in

Felle

Firewood Processor - This is

‘05 Gehl CTL 70 PROTECT Them ALL ® Wrap With Pro-Tec-To ‘83 John Deere Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

4850

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

‘06 Lines Western Star Hydraulic Lines – Fuel One owner and comes with all chain conveyer, 8 way Hoses splitter, on – Air Item ID: 14073 Michigan Special 20,000lb goose neck trailer.

Item ID manuals and receipts.

Purchased Contact: AustinElectric Wire Bundles – Control Cables Ph: (888) 401-6367 x703

13916. Austin x703

Best Value Portable Log Splitter

‘89

Sam x702

new forID: $32,500.

Item ID 13865.

Item 14011

Contact: Sam x702 Austin

Ph: LOGGING (888) 401-6367 x703 ® with 1700 hours, in very good -® Small manufacturer in PA has EQUIPMENT PRO-TEC-TO WRAP & PRO-TEC-TO SLEEVE condition. Easily produces high the best valued log splitter.

CUT YOURmade DOWNTIME AND YOUR COSTS!

BANDIT

(excellent condition.). Item ID 1995 Barko 775 B Feller Buncher

on injection pump. always started

1998

kohing head. head works great.

hour

approximately 1500 hours. Hour Item ID: 13855

large

Ph: (888) 401-6367 x702 have only used it to load trucks or

Dece

‘08 John Deere large liftin 1999 Barko 160D new engine with CT332 Item ID 13185. Sam x702

Contact: Sam The last 2 owners Cum meter dont work. as a backup as needed. Has a CTR

1324

quality chips with patented ‘Cone’

Handles logs up to 32”. Uses

1999 x702 Bandit 1900 Tracked Disc

delimber,611B grapple hasinjectors, been rebuilt. 2002 HydroAx - New

vans and produce 6 - 8 loads per

but electronic option is available.

50% or better.

475hours. hp Cummins has around 7000 It’s a clean

Item IDRebuilt 13694.hydraulic Sam x702pump engine.

94 Barko 275 Excellent valueSam and new teeth. Item ID 13768.

Protection Against Pinching, Crushing, Rubbing & Abrasion motor. Manual start Chipper - Cat Carriage 2004 Hydro AxUnder 470 - This cutterat – EVEN UV RAYS!13HP BothHonda are Impervious to Oils and Solvents.

drum design. Can easily load 42’

day. Item ID 13882. Austin x703Protection Hasfor LogLogging, Lift. Uses 4-way wedge Provides Maximum

EDGERS & GANGS adjustable to single Construction & Stationary Applications Like: two way. Great

Brewco Saws - Two Brewco Value!

ItemMasts ID 12062. Sam x702 • Debarker Buggies Saws • Pantograph Arms PA. • Forklift

Diesel.

7500 Hours.Only One reason owner. and machine.

Fortight The Distributor Well maintained. selling is due to anItem upgrade.

Item Nearest You, CallID 13294.

Sam x702 Sam x702 ID 13846.

800-355-1250 2004 Hydro Bandit Ax Beast 4680 670 - Engine hasorModel Visit

• Wheel Loaders • Skidder • Knuckleboom in excellent condition.

Runs great. Grapples Firewood ProcessorLoaders - This is a • Fellerbuncher Heads • Stroke Item ID 13644.

Sam x702Heads • Harvesting homemade processor with a 10’www.pro-tec-toproducts.com 3412 engine aboutCaterpillar 500 hours, Diesel new saw motor Delimbers • Dozer Blades FIREWOOD PROCESSORS log deck. Has a hydraulic grapple, with 850 last HP. year.

5300 Previous hrs. Mill owner in and disc

Anywhere Hoses & Wires Are – Pro-Tec-To® Products chain and kicker that all runs off Offers Maximum Protection, Lower Costs, Reduced - It has a 353 Detroit diesel, 40 Downtime and Less Spills! of a 4 cylinder Mercedes power 2010 Shop Built Wood Processor

inch insert tooth circle saw, 30 foot  Issue 364 441

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

good condition.

Just finished 10 OEM’s, Repair Facilities & This had the hydrastats redone.

Distributor Inquires Welcome Acre clearing job, ready to work! has a 22” high capacity head and is Remote control.

Big production a very clean machine.

Mounted on

34’s with 50% tread. Item ID 13828.  List  seLL  exchange  buy  save Sam x702

Boom cylinders have leaks. injector pump. New 5.9minor cummins

with low at hours at 3,500. 5.9 x702 CUMMINS grapple.

1999 Hydroaxcontinuous 511EX - New

Runs Great!.

Item ID only 13740.

Sam cummins engine with 1500 x702 hours. Caterpillar just replaced

BELL at the end gear box to hydraulics Bell Super - Thistotal Bellon has of1990 summer.

11000Thours

a brand new cutter.

Tires areDuetz 28L’s engine. @ 80%, 2Lever control, 33” bar, pump andnew tranny @ 40% and one slick. Brand

12,00

Work

Aust

1998

Bunc

Cum

hour

22” L

A/C

Cutti Sam

center section. 20” single post ❘  LumbermensCO.com KMC head. Heat and air work. Item ID

Tough Meets QUALITY The Tree that Started it All!

The

Woods Publishing

ADVERTISING SALES

FOR CLASSIFIEDS Call 888.401.MENS Direct Bolt-In Seats for Most SeeMakes/Models pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at Boonville, New York www.LumberMB\ISmagazine.com www.starwebhosting.net/woodsmen/

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

10 hours on this machine since it has been rebuilt, it has a 24foot in

“WE KNOW SEATS SO YOUfeed DON’T deck 20HAVE foot outTO!” feed deck

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

** CALENDAR**

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO sales@toughseats.com TOLL9 Sept Thurs, 7 Sept - Sat, FREE

toughseats.com

with 44 inch wheels, and all the

855-579-0538

bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers

that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

it includes two sets of Mcdonough

WOOD-PAKER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

The Number One Bundling Machine Line for PackagedCARRIAGES Firewood & DRIVES Austin Woods

** INFO LINK**

2010 Cardinal HD Carriage (888) ext. 703 B &401-6367 B Manufacturing is in the foothills of the Allegany Mountain range in Olean, New austin@lumbermens.co (Sawmill) - Cardinal York.

We have been in business since January 1985 producing woodCarriages bundling systems called “THE WOOD-PAKER” for the firewood and waste wood industry.

We line have geared MAILING ADDRESS Carriage it includes carriage B Mfg . ...............................

18 producers.

M&F Gauge .............................

28 Box 1916 our P.O. machinery to meetB & the needs of various We offer several different types of with onboard log turners, carriage Columbia, TN 38402-1916 equipment for packaging wood from shrink wrapping, stretch33wrapping and bagging.

B. H.your Payne ..............................

16 Meadows Mill, Inc. ................ drive, hyd pac for carriage, (888) 401-6367 However you wish to BUNDLE we have a system for you.

AD SUBMISSIONS

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

May be sent All to­ these systems provide convenient packaging of30waste-wood, cabinet with electronic drives for Inc. ..............

Bell's Machining .....................

27 Metal Detector's morris@lumbermens.co slabs, edgings and firewood for the consumer market.

POSTMASTER

Brute Force Mfg. ..................... 31

carriage knees, husk including

Midwest Sharpening.............. 26

48" bottom saw and 36" top saw

Buck Equipment (AIM) ........ 36 Morbark .....................................

9 Send address changes to: THE WOOD-PAKER LINE INCLUDES: YOUR ONE-STOP SHOP FOR Lumberman's Exchange BUNDLING SUPPLIES Corley Mfg 32 Multitek 12 • The WOOD-PAKER: 6 models of.............................. the HEAT SHRINK oven ...................................

P.O. Box 1916 Columbia, system.TN 38402 CRD Metalworks .................... 25 Piper's Saw Shop.................... 13

STACKING RAC

• The WRAPPER: person stretch wrap unit17electric and ............................ 40 The Lumberman's Exchange is Single CW Rotochopper Mill-ArmorHog .............. published monthly by Woods manual available.

CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 Publishing, P.O. Box 1916, • The Columbia, TNBAGGER: 38402. All rightsA conveyor system using horizontal mesh Dyna Products ........................ 35 Sawmill Exchange .................. 11 reserved.bags.

All editorial/ advertorial submissions are used at the Empire Hydraulics 8 Select Sawmill ......................... 19 • The TILT BAGGER: Single person unit................... using mesh bags. discretion of the publisher and may be edited for purposes of clarity Great Lakes Mfg. .................... 34 Smith Sawmill ........................... 4 and space. Although all efforts have Affordable and Easy toMachinery Operate • 3INCREASE YOUR The Paul Bunyan Show ......... 39WOOD PROFITS! Hahn ...................... been made to ensure accuracy of content submitted by advertisers WOOD-PACKAGING has come into its own.

Hurst Boiler ............................. 14 Thomas Industrial Controls..... 10 and writers, the Lumberman's Exchange, its principles and Iron Bull ................................... 21 Union Grove Saw & Knife.. 2, 37 associates, are not held liable for errors or omissions. Reproduction, Kilgore Saw ............................. 22 Universal Refiner ................... 23 in whole or part, is prohibited with­ B & B Manufacturing • 3007 West River Road • Olean, NYwww.BakerProducts.net 14760 Lignomat ................................. 24 WoodMizer ................................ l out written consent.

800.S48.6914 I S73.663.7711 E-mail: bbmfg@verizon.net • www.thewoodpaker.com ©2017 Woods Publishing

716-373-5881

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

❘

 (888) 401-MENS L!

NO. 17

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

When You Buy Your Circular Saws From B.H. Payne You’ve Bought the best... We Guarantee It! “Precision Under Pressure” Traditional Quality Combined With Todays Technology Quality Brand Reg. U.S. Pat Off

Circular Saws Saw Bits and Shanks Circular Knives Carbide Tipped Saws Carbide Strobe ® Saws B.H. Payne & Company Saw Manufacturers

Call 800 752-0627 Make Sure To Ask For Our Free, Complete Saw Catalog We Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels, Knife Grinding Wheels, Saw Gumming Wheels & Knives.

‘16 Halverson H140 Skidsteer (DEMO) ‘11 Doosan DL200 Item ID: JW-909632 Item ID: JW-113876 Contact: J Williams Contact: J Williams Ph: (888) 401-6367 x701 Ph: (888) 401-6367 x701

P.O. Box 90608 East Point, GA 30364 404 761-8711 Fax 404 761-5398 13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

“Since 1890”

E-mail: info@paynesaws.com

Web Site: www.paynesaws.com

‘05 Gehl CTL 70

‘04John Komatsu ‘83 Deere WA500-3LK 4850

ItemID: ID:14073 14048 Item Contact: Austin Contact: Austin Ph: (888) 401-6367 x703 Ph: (888) 401-6367 x703

Item ID: JW-986495 Contact: J Williams John Deere 440B Ph: (888) 401-6367 x701 Item ID: 14064 Contact: Austin Ph: (888) 401-6367 x703

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916.

Austin x703 at 75%. 9400 disc. Undercarriage Best Value Log Splitter hours.

ItemPortable ID 13796.

Sam x702

Item ID: 14077 14’ Snow Pusher

Contact: Austin Item ID: JW-492406 Ph: (888) 401-6367 Contact: J Williams x703 Ph: (888) 401-6367 x701

20

Here’s What You Get With Every B.H. Payne Saw • Saws manufactured from only the Highest Quality Nickel Alloy Steel.

• Each Saw Milled with State-Of-The-Art Precision CNC Milling Machine.

• We Tension Your Saw to Your RPM Speed BEFORE Leaving Our Factory.

• Your Satisfaction - Completely Guaranteed.

B.H. Payne & Company, Inc.

‘93 Barko 180B

‘95 John Deere C6

‘05 Transport ‘13 KMC 2500 Track Trailers Custom Skidder Log Pup

Item ID: ID: JW-538174 14078 Item Contact: Contact: JAustin Williams Ph: (888) (888) 401-6367 401-6367x701 x703 Ph:

‘04 Fabtek 344B Tree Farmer

Item ID:ID: JW-093430 Item 13920 Contact: J Williams Contact: Austin Ph:Ph: (888) 401-6367 x701 (888) 401-6367 x703 Processor - This is a Chomper capacity!.

Item ID 13421.

Sam super 14, with a 60hp engine.

In x702 very nice shape.BARKO Only 171 hours, 1994 Barko 160Bchain - Electric comes with green conveyer.

off onto 624 a conveyor.

This is a very All knuckleboom, 30'for boom, 75hp of the manuals the engine, Waratah Super - New well built processor.

Item ID 13820. motor, Rotobec continuous and the chopper itself come with Computer for head (Logrite).

Sam x702 5,000 hours. it,grapple, as well as all oforiginal the electrical 10500 hours. New main pump Firewood Processor - Thisrebuilt is and auxiliary pump. New a Chomper Model PDA New engine with only 30016hours.

(excellent Item condition.).

Item ID schematics.

ID 13894.

Austin 13238. Chris x700 x703

lowNew hours.

Control panel includes UC. front window.

Super tach,machine. oil pressure, tempSam and tight Itemwater ID 13595.

on injection pump. always started processor.

Owner retired.

Located in good order. ingood.

Montana.

Itemworking ID 13789.

Sam 22in

automatice processor drive motorsfirewood on head for 18'/sec. with John Deere power unit with Almost brand new rails on 90%

amp gauges. Cuts logs up to 16”. x702 One John owner and 700J comes with- This all 2006 Deere Dozer

2000 W900 KW w/ Rotobec MT27 manuals and receipts. work horse comes with Purchased a winch, Heavy Spec newnew for $32,500.

Item ID and undercarriage, it 13865. is tight

Sam x702 and dry & running Item ID: 13993daily with 4500

Ite Co Ph

1995 Barko 775160 B Feller Buncher 2007 John Deere - Track Pumps recently redone. excavator with a waratah 400 hrs

‘04 CAT 953C Frontend Loader

kohing head. head works great. x702 Item ID 13185.

Sam with x702 2007 John Deere 2554

‘14 Lo

One Item Con Ph:

2011 Log

engin Item ID: 13854 1999 Barkoprocessor 160D - new engine with 624 Waratah - New Contact: Sam 11,23 approximately 1500 hours. sprockets, rollers, and chain.

Ph: (888) 401-6367 x702Hour secti

‘04 Woodmizer LT70 Hydraulic

meter donton work.

The last 2This owners 10900 hours this machine.

prote have only it to load trucks or machine is inused excellent condition. trailer.

4-Wheel drive and steering. steer Ph: (888) 401-6367 x703 1988 Deere condition.

Easily made the-best splitter.

BANDIT as aID backup needed.

Item 13760.as Sam x702 Has a CTR 2006 John John Deere 748GIII - 8700 Buncher GN valued Roy 22’’log continuous 13851. Sam x702produces high Top Quality machine.

Would be traile Item ID: 13940 440D 2007 John Deere 648GIII - Dualrebuilt. hours, running daily.

Item ID saw head.

Heated A/C cab.

2004 648GIII Johnpatented Deere duel quality chips with ‘Cone’ Handles logs up to&32”.

Uses 1999 Bandit 1900 Tracked Disc delimber, grapple has been hours on this machine, in excellent great for log yard or mill work. inspe Contact: Austin Item Item# 13781 arch with winch and dualing 13881.

Austin Standard boom.

Medium pads. arch design. skidder.Can - Slick Machine. drum easily load 42’ 13HP Honda motor.

Manual start Chipper - Catx703 Under Carriage at Boom cylinders have minorrings. leaks.

Ph: (888) 401-6367 x703 Con condition.

Item ID 13937.

Austin Item ID 13476.

Sam x702 for w Contact: Sam Tires atSam 50%.x702 Straight 2006 Deere475 748GIII - This Operator, service, andisparts books Runs good motor6is- in top notch vans and produce 8 loads per but electronic option available.

50% John or better. hp Cummins Itemare ID30.5’s 13694.

Ph: Ph: (888) 401-6367 x702 x703 2011 Liebherr A904 Rubber Tired MD. metal,275 glass is good, and skidder comes equipped a fire sheet included.

ItemUses ID 13203. x702 condition.

ID Austin 13610. Sam day.

Item IDItem 13882. x703x702 Has Log Lift.

4-waySam wedge Diesel. 7500 Hours.

Onewith owner.

94 Barko - Excellent value LIEBHERR Log Handler. Liebherr 4 cylinder interior is inatgood shape.

This5.9 unit system.

Hour 2006 JD 2554 Processor 2004 John Deere&648GIII - This EDGERS GANGS adjustable to single twowith way.624 Great suppression Well maintained.

Item ID meter 13294. with low hours at 3,500.

2007 Liebherr A924C Log Handler 1997 engine with great fuel economy. has been very continuous well taken care of.

11000 hours, but is inop Waratah Processing Head. machine has-13000 total hours on Brewco Saws Two Brewco Saws Value!

PA.‘Super’ Item ID 12062. Sam x702 reads Sam x702 CUMMINS grapple.

Rubber Tired Log Loader. 13,000 Pierc 11,230 hours. Fixed cab riser. Two 13,500 now, hadBeast a newModel engine4680 at 5000 10500 hours.

New pumps.

New body, with only 3000 hours on inthe excellent condition.

Runs great.

Firewood Processor - This is a 2004 but Bandit Runshours.

Great!.Item ItemIDID13710.

13740.Sam Sam hours. 40’ Reach with two section on 60 section boom with 38’ reach. Cab x702 hours.

Tires are 30.5 X 32engine at 20% engine. Newprocessor drive motors the ID new13644. motor, comes Item Sam x702with a set homemade withon a 10’ 3412 Caterpillar Diesel x702 boom. 60” Log Grapple with Good protection. 4-Wheel drive and 2008 JD 648H w/Swing and on 5300 all 4 that head.

Almost rails. New front of FIREWOOD chains, working daily. Item ID PROCESSORS log deck.

Has new a hydraulic grapple, withchains 850 HP. hrs. are Millstill in in BELL Boom continuous rotation. Fixed Cab just s steer. Can pull loaded trailer.

Grapple - Very clean good All pins tight, very window.

13878.

Austin 2010 Shop Builtx703 Wood Processor chain andSuper kickertight thatmachine. all runs off goodshape. condition.

Justare finished 10 1990 Bell Super T - and Thisunique Bell has Riser with cab guard protection. delim Cleaned, serviced and inspected. machine. well Lever little in the cradle.

ID Runs great. One owner!. Item ID 2004 853G - This - It hasJohn a 353Deere Detroit diesel, 40track Acreslack clearing job, readyItem to work! a brand 6800 new hours Duetzand engine. of a 4 cylinder Mercedes power Front push blade. Tight and dry.

Tight and ready for work.

Itemand ID:dry 13866 maintained by onepump owner.and Young 13930.

Sam x702 Big production 13550.

Sam x702 cutter is intooth excellent with unit. inch insert circlecondition saw, 30 foot Remote control. control, 33” bar, tranny Has a 4’ chain saw that kicks 1987 Cleaned, Serviced, and Checked Located in Baltimore, MD. Item ID Contact: Sam Swing Boom grapple gives you 2006 John Deere Firewood 2006 JD 2554 Processor with new 30” pads, pump, batteries and Ph: (888) 401-6367 x702 MOT out for service. Can pull loaded 13477.

Sam x702  Issue 364 ❘ 441 Lumbermens™  since 1986  List  seLL  exchange  buy  save ❘  LumbermensCO.com Item Con  Issue 364 Lumbermens  since 1986 ❘  List  seLL  exchange  buy  save ❘  Lumbermensmagazine.com  Issue 364 Lumbermens  since 1986 ❘  List  seLL  exch Ph:

with 1700 in veryItem good rings for hours, wet weather.

ID

-2005 Small manufacturer PA has John Deere 903Gin Feller

Contact: Austin LOGGING EQUIPMENT hours.

Item ID 13883.

Austin x703

Trelan Chipper

‘05

‘99 51

** CALENDAR**

STATEAvailable!

WOODSMEN'S FIELD DAYS All NY Sizes

BANDSAW

Fri,economical 18 August - allSun, TOP PERFORMING, blades for primary20 & August

BLADES

secondary wood processing.

Welded to yourNew lengths!York Boonville, We also offer expert sharpening services, plus...

www.starwebhosting.net/woodsmen/

Gang • Edger • Scragg • Trim • Split • Strob ....and just about any Custom Saws you need to keep you cutting longer... for less. Ask about FREE Shipping!

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

©2019 Wood-Mizer LLC

BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept Call Marvin Miller for a quote

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

Escanaba, Michigan 231-924-5953 (fax) 402-966-2752 / 37590 E. Anderson Bridge Rd • Kilgore, NE 69216

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough

ROW ELECTRICAL EQUIPMENT, INC.

PUBLISHER

Woods Publishing

MID-ATLANTIC

ADVERTISING SALES

LOGGING & BIOMASS EXPO

EXPO •KENTUCKY DC Motors -WOOD Crane and Mill 15 Sept Speed - Sat,Drives 16 Sept •Fri, Adjustable Lexington,- AC Kentucky • Generators and DC http://www.kfia.org/ • Engine-Generator Sets •KentuckyWoodExpo.aspx Transformers, Single Phase

in ve1y good condition, Cuts 130

• Squirrel Cage Motors • Gear Motors • Wound-Rotor Motors • Synchronous Motors • DC Motors

MARKETING DIRECTOR John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Fax to:

419-244-8887

Donna Heninger

pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine

YOUR SOURCE FOR USED, RECONDITIONED:

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

DESIGN DIRECTOR

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

P.O. Box 2812 • Toledo, Ohio 43606

• Transformers, Three-Phase feet a minute alsoStarters has CLT presses.

• Across/Line Magnetic Item ID 13876.

Austin x703 • Reduced Voltage Starters • SafetySSwitches & W 125 Band Mill with • Phase Caterpillar Convertorsgenerator - Low hours

on the mill, electronic computer Set 800-248-4479 works,1 1/2" or 2" band, 22ft. track

THE PAUL BUNYAN SHOW WWW.RoWELECTRiCAL.CoM Fri, 6 Oct - Sun, 8 Oct

419-248-4479 Cat 3406 140KW Genset, 12,400 Cambridge, Ohio rowelec@glasscity.net sales@rowelectrical.com Sam Wall www.ohioforest.org hours ready to run. Item ID 13434.

WE702 ANSWER THE PHONE 24 HOURS • WE BUY USED ELECTRICAL (888) 401-6367 ext.

EQUIPMENT REPS

sam@lumbermens.co

**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

BellAD Ultra T on SUBMISSIONS May be sent to­ Tracks

morris@lumbermens.co Item ID: 14023 Contact: Sam POSTMASTER Ph: (888) 401-6367 x702 Send address changes to:

Lumberman's Exchange with winch, P.O.direct Box drive.

1916 Comes Columbia, TN 38402 with 6000 hour extended warranty.

Has only 2600 hours. Has new

The Lumberman's Exchange is 30.5 X 32 26 ply on rear and 70% published monthly by Woods on front. Still new1916, skidder and Publishing, P.O.aBox Columbia, TN 38402.

All13696. rights Sam priced to sell.

Item ID reserved.

All editorial/ advertorial x702 submissions are used at the 2013 JD 848H Grapple Skidder discretion of the publisher and may 4200 hours.

Tires at 50%.

Winch. be edited for purposes of clarity and space. efforts have Very goodAlthough runningall condition.

Pins been madeMachine to ensure is accuracy of are tight. dry. Engine content submitted by advertisers runs great. Item ID 13555. Sam and writers, the Lumberman's x702 Exchange, its principles and associates, not held for 1991 Johnare Deere 640Dliable Skidder errors omissions.

Reproduction, - 23.1or x 26 Tires 50%, Rebuilt in whole or part, is prohibited with­ Trans.,Good Tight Machine. Item out written consent.

ID 13191. Sam x702 ©2017 Woods Publishing

Sam x702

FW-16 CARRIAGES & DRIVES INFO LINK** FIREWOOD WRAPPER 2010 Cardinal HD Carriage

Carriages (Sawmill) - Cardinal

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

‘16 Halverson H140 Baker ...................................... 5, 7 Skidsteer

Bell's ..................... 27 Item Machining ID: JW-192810 Contact: J Williams Ph: (888) 401-6367 x701

Brute Force Mfg. ..................... 31 Buck Equipment (AIM) ........ 36 Corley Mfg 32 does great job.............................. in hardwood. Priced to sell!.Metalworks Item ID 12206.

Sam x702 25 CRD ....................

John Deere 20 hole Sweda wheels

CW Mill-ArmorHog .............. 17

- These 50’s are mounted on hard

CW Mill-Hogzilla ................... to find 20 hole John Deere sweda15 rims. Still 50% tread left on these

IN-STOCK & READY TO SHIP!

Carriage line it includes carriage

with onboard log turners, carriage

Sanborn Scragg drive, hyd pac for carriage, Mill The Go Fast Firewood Wrapper Menominee ..................... 29 ‘05 CATSaw TK560 sawyers cab, computer controls, ‘01 ItemBenson ID: 14050 34’ End produces better firewood Item ID: 14004 cabinet with electronic drives for Metal Detector's Inc. .............. 30 Contact: Austin Woods Contact: Sam Dump bundles than the rest.

(888) 401-6367 Ext.including 606 carriage knees, husk Ph: (888) 401-6367.............. x702 26 Midwest Sharpening ID: 13818 The FW-16 Firewood WrapperItem 48" bottom saw and 36" top saw Morbark ..................................... 9 Contact: Sam 1977 (est) FMC 13910. Austin x703 is built with220CA true Tracked gear reduction, (888) 401-6367 Ext. 603 Multitek ...................................

Skidder Swing Boom 12 Franklin 170 Skidder - This would Schutte Hammermill largew/ESCO bearings, and heavy-duty Grapple Saw - Good running condition. be a great starter skidder. It is Piper's Shop ....................

13 Grinder frames, Front blade. outlasting Detroit 6V53 the engine. a single arch with winch. Runs Item ID: 13965 Rotochopper ............................ 40 No winch....they cannot fit with good and pulls good. Detroit 453 competition.

Contact: Austin

STACKING RAC Simple, Safe, and Reliable.

Row ............................

20 swingElectric boom grapple.

Military style

Ph: (888) 401-6367 x703

tracks at 70%. Item ID 13227. Sam

turbo and 3 speed power shift

transmission. Good center section.

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Sam x702Hydraulics ................... 8

Select Sawmill .........................

19 2012 Refurbished FMC 210 Tracked

Standard Features:

major. Item ID 13819. Sam x702 Options:

2004 Fabtek 546C Forwarder -

• 1/3HP 120V Motor totally refurbished in 2012. No

• engine Wheelwith Kits Mag 64-knive approximately 600

tires. 4 available. Item ID 13852.

Great LakesFABTEK Mfg. .................... 34

x702

SkidderSawmill - 1976 Model that has been Smith ...........................

4

Good running condition. 30.5 tires

The Paul Bunyan Show ......... 39 hours since updates were done.

60% and come with tracks. Front

tracks. Detroit 6V53 engine with

Hahn Machinery ...................... 3

in front Boiler at 60%..............................

650 tires in back at Hurst 14

• Fork Pockets

Includes Industrial warranty on machine Thomas Controls .....and 10

There are a few leaks, but nothing Franklin 3000 - 4BT Cummins

NeedsGrinder tires. Good machine Source • hours.

Automatic Wrap Cycle! for the ID: money and for a start up Item 14007

blade. JD engine. One owner.

company.

Item ID 13786.

Sam x702 Production Without Compromise Contact: Austin Union Grove Saw & Knife.. 2, 37 195HP. Clark 28000 Powershift 2003 Franklin Q80 Skidder Ph: (888) 401-6367 - THAT’S THE GO Grapple FASTx703 WAY

x702

Winch. ROPS Cab. Includes bolt

Iron Bull ................................... 21

Kilgorebunk.

SawItem .............................

Double ID 13363. Sam22 Lignomat ................................. 24

FMC

Universal Refiner 23 transmission.

Clark ...................

40,000 lb

- 7500 hours, but just 5000 hours 2013 Caterpillar on 1-800-854-7439 reman engine. New Radiator; www.BakerProducts.net WoodMizer 535C ................................ l swing motor. HasPump; jet fit on grapple head with full function. WWW.GOFASTMFG.COM New800.S48.6914 Hydraulic Comfort Inew S73.663.7711

Item ID: 13868 cab withThis good working heat and system. machine is loaded...

Contact: Sam  SELL YOUR EQUIPMENT  24/7 SUPPORT has ❘ pro-heat  (888) 401-MENS NO. 19 -Harvester USED FORESTRY EQUIPMENT l§ TODAY ❘ L! 0 Skidder❘ - Good running unit. x702 air; Tires at 80%.

Item ID 12450.

Head - 290D in good FOR SALE system for cold Ph: (888) 401-6367 x702 1995 JD 290D with Hytec 4700

1977 (est) FMC 220CA Tracked

condition. Engine just overhauled.

Detroit 6V53 cranks and runs

New Paint. Item ID 12731. Sam

FRANKLiN

Sam x702

weather start. Has fire suppression

3

3

e. Just

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

SAFETY ALERT

Worker Killed by Rotating Disc Cutter on Excavator “Precision Under Pressure”

BACKGROUND On a winter day in the Pacific Northwest, an equipment operator trimming brush alongside a logging road was killed after he was apparently pulled into a rotating disc used to cut brush. He was using an excavator with a disc cutting attachment on the boom.

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

PERSONAL CHARACTERISTICS The victim was an experienced equipment operator.

He was working alone.

Every Reputable Wide Band Supplier Offers 3 High Quality Swedish Steel

13428 Victory // POWidth Box 124 3 3” – 8”Ln.Band Adams Center, NY 13606 3 16 to 20 Gage

3 Double Cut Options 3 Choice of Swage or Stellite

WOLVERINE

BUT ONLY THE

BY MENOMINEE SAW GUARANTEES • Cutting Edge Plasma Welds ‘05 Gehl CTL 70 • The Industry’s HighestItem Band Capacity ID:Saw JW-986495 Contact: J Williams • Quick Delivery from our HUGE Inventory Ph: (888) 401-6367 x701 ‘83 John Deere & Exchange Program • Fast Sharpening 4850to Keep YOU Running chain conveyer, 8 way splitter, on Item•ID: 14073 Competitive Pricing 20,000lb goose neck trailer. Item ID Contact: Austin 13916. Austin x703 Ph: (888) x703 And401-6367 ONLY Menominee Gives You Everything

Value Portable Log Splitter You need in a WideBest Band Saw – Plus - Small manufacturer in PA has Expert Service from the Industry’s Most condition. Easily produces high made the best valued log splitter.

Knowledgeable Staff. with 1700 hours, in very good

quality chips with patented ‘Cone’

Handles logs up to 32”. Uses

Got aload Wide Problem? drum design. Can easily 42’ Band 13HP Honda motor. Manual start Call Menominee and You’ll vans and produce 6 - 8 loads per Saw butToday electronic option is available.

Whyx703 More Mills Trust day. Item ID Learn 13882. Austin Has Log Lift.the UsesPro! 4-way wedge EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

adjustable to single two way. Great

TOLL FREE 1-800-582-0470 homemade processor with a 10’

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

FIREWOOD900 PROCESSORS log deck. Has hydraulic grapple, 16th St., Menominee, MIa49858

Wood Processor chain kicker that all runs off 906-863-2609 Fax: and 906-863-1147 r PT 2010 Shop BuiltTel: Email: info@menomineesaw.com diesel, 40 of a 4 cylinder Mercedes power aling - It has a 353 Detroit

unit. Has a 4’ chain saw that kicks WWW.MENOMINEESAW.COM

inch. inch insert tooth circle saw, 30 foot

30’ reach on the boom. Joystick

Skidder - Very good running

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer

Item ID: 13920 UNSAFE ACTS AND CONDITIONS Contact: Austin ‘13 KMC 2500 Track The engine of the excavator was idling. The (888) 401-6367 x703 Skidder cutting head hadPh: 400-pound power to it and was Item ID: 14078 rotating just above idle. At some point, the victim left Contact: Austin capacity!. Item 13421. Sam x702 the operator’s seat of the excavator andID approached Ph: (888) 401-6367 x703 BARKO the rotating cutting disc attached to the end of the 1994 Barko 160B - Electric boom.

off onto a conveyor. This is a very

well built processor. Item ID 13820.

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

ACCIDENT-INJURY grapple, 5,000 original hours.

It appears the victim may have grabbed a tree Firewood Processor - This is (excellent condition.). Item ID branch stuck in the cutting head and was a Chomper Model 16 PDA 13238.

Chris x700likely pulled into the firewood rotating disc, suffering injuries thatBuncher were automatice processor 1995 Barko 775 B Feller with John Deere power with -the Pumps recently redone.

400 hrs immediately fatal.unitBecause victim was working low hours. panelfound includes injection pump. always alone, heControl was not untilonthree hours after thestarted end tach, oil pressure, water temp and good. in good working order.

22in of his shift.

Sam x702

amp gauges. Cuts logs up to 16”.

One owner and comes with all

kohing head. head works great.

Item ID 13185. Sam x702 RECOMMENDATIONS FOR CORRECTIONS 1999 Barko 160D - new engine with •new Make sure workers are trained on and use lockoutfor $32,500. Item ID 13865. approximately 1500 hours. Hour tagout procedures for machinery they will be using.

Sam x702 meter dont work. The last 2 owners • When operating machineryhave powered byit toa load hydraulic LOGGING EQUIPMENT only used trucks or system, BANDIT make sure all theashydraulics are disabled a backup as needed.

Has a CTR 1999 Bandit 1900 Tracked Discof the delimber, grapple has been before getting out cab, particularly ifrebuilt. the Chipper - CatisUnder Carriage at Boom cylinders have minor leaks. engine left running.

50% or better.workers 475 hp Cummins Item ID 13694. Samequipment x702 • Have inspect and maintain Diesel. 7500 Hours. One owner.

94 Barko 275 - Excellent value before using it.

Well maintained. Item ID 13294. low at hours at 3,500. 5.9 • Train workers who operate with equipment like that used Sam x702 CUMMINS continuous grapple. in this incident on the hazards posed by getting too 2004 Bandit Beast Model 4680 Runs Great!. Item ID 13740. Sam close to any rotating disc.

3412 Caterpillar Diesel engine x702 •with For employees who work alone, develop 850 HP. 5300 hrs. Mill in BELL a checkin-check-out A 1990 formal plan Tfor checking good condition. Just procedure. finished 10 Bell Super - This Bell has Acre job, ready working to work! a brandcan new Duetz engine. Lever onclearing employees alone be critical for Remote control.

Big production control, 33” bar, pump and tranny adequate emergency response time. manuals and receipts. Purchased

 Issue 364 Lumbermens™  since 1986 ❘ 441  List  seLL  exchange  buy  save roatation on the grapple w/ a 2006 Tigercat 630C Grapple Model

s

‘93 Barko 180B

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck

72ND ANNUAL GREAT LAKES

with 44 inch wheels, and all the Since 1986, Lumbermens has LOGGING & HEAVY EQUIPMENT EXPO published a monthly circular Thurs, 7 Sept - Sat, 9 Sept bells and whistles, its a production reaching sawmills, loggers, Escanaba, Michigan machine, with air strain conveyers pallet makers, recyclers and that go up and down, with airbags, industrial woodworking plants & BIOMASS TO VIEW DESCRIPTION, PRICING ANDMID-ATLANTIC LOCATION LOGGING - VISIT WWW.LUMBERMENSCO.COM worldwide. it includes two sets of Mcdonough

Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

MARKETING DIRECTOR

John Williams (888) TIMBERJACK 401-6367 ext. 701 1996 240B j@lumbermens.co

2020 TIGERCAT 625E BOGIE SKIDDER Item ID: 8088

Contact: WALKER Email:EQUIPMENT Walker@lumbermensco.com REPS Phone: 888-401-6367 Sam Wall EXT 707

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

(888) 401-6367 ext. 702 sam@lumbermens.co

feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with

2016 WOODMIZER

Caterpillar generator - Low hours

LT3500 SAWMILL

on the mill, electronic computer Set Item ID: 8009 works,1 1/2" or 2" band, 22ft. track

Fri,Contact: 6 Oct WALKER - Sun, 8 Oct

Contact: WALKER Email: Walker@lumbermensco.com Cat 3406 140KW Genset, 12,400 Phone: 888-401-6367 EXT 707

Email: Walker@lumbermensco.com Cambridge, Ohio Phone: 888-401-6367 EXT 707 www.ohioforest.org

hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

H O T

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

is an extremely accurate machine

Lexington, Kentucky http://www.kfia.org/ 1997 JOHN DEERE 548G KentuckyWoodExpo.aspx GRAPPLE SKIDDER THE PAUL BUNYAN SHOW Item ID: 8062

CABLE SKIDDER DESIGN Item DIRECTOR ID: 8123 Donna Heninger

is supported on both sides. This

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

May be sent to­ CABLE SKIDDER morris@lumbermens.co Item ID: 7985

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force ..................... 31 ItemMfg ID:.7975

Midwest Sharpening .............. 26 Item ID: 7893

Contact: WALKERchanges to: Send address Walker@lumbermensco.com Email: Lumberman's Exchange Phone: 888-401-6367 EXT 707 P.O. Box 1916

Contact: WALKER (AIM) ........ 36 Buck Equipment

Contact: WALKER Mor bark .....................................

9

carriage knees, husk including Item ID: 7709 48" bottom saw and 36" top saw

Columbia, TN 38402

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of contentCRS19 submitted by advertisers HARVESTER and writers, the Lumberman's ROLLER STROKE Exchange, its principles andHEAD Item 7598 associates, are notID: held liable for errors or omissions.

Contact: WALKERReproduction, inEmail: whole Walker@lumbermensco.com or part, is prohibited with­ out written consent.

Phone: 888-401-6367 EXT 707 ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21 Item ID: 7639 Kilgore Saw ............................. 22 Contact: WALKER

Union Grove Saw & Knife.. 2, 37 Item ID: 7615 Universal Refiner ................... 23 Contact: WALKER

Lignomat .................................

24 Phone: 888-401-6367 EXT 707

WoodMizer ................................ l Phone: 888-401-6367 EXT 707

ADJOHN SUBMISSIONS 1993 DEERE 540E POSTMASTER

2006 JOHN DEERE 700J DOZER

Email: Walker@lumbermensco.com Corley Mfg ..............................

32 Phone: 888-401-6367 EXT 707

2016 BAKER 3650E

SAWMILL OPERATION

Email: Walker@lumbermensco.com

- USED FORESTRY EQUIPMENT FOR SALE

❘

with onboard log turners, carriage drive, hyd pac for carriage,

JOHN DEERE 740A

1998 CAT 515

GRAPPLE SKIDDER

GRAPPLE SKIDDER

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

Email: Walker@lumbermensco.com Multitek ...................................

Phone: 888-401-6367 EXT 707 12

STACKING RAC

2013 JOHN DEERE 700K

2012 CAT 525C

CRAWLER DOZER

GRAPPLE SKIDDER Item ID: 7552 Contact: WALKER Email: Walker@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 707

Email: Walker@lumbermensco.com

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

B U Y S

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 21

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM “Precision Under Pressure”

‘16 Halverson H140 Skidsteer (DEMO) 1992 TIMBERJACK 240

2005 TIGERCAT 240B

CABLE SKIDDER Item ID: 7478

LANDING LOADER Item ID: 7539

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

Item ID: JW-909632 1999 FRANKLIN 105 Contact: J Williams FELLER BUNCHER Ph: (888) 401-6367 x701 Item ID: 7470

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703 2006 JOHN DEERE 755C CRAWLER LOADER Item ID: 7466 Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

‘95 John Deere C6 Tree Farmer

BOOM LOADER Item ID: 7463

Item 14078 1977ID: JOHN DEERE 450C Contact: Austin CRAWLER DOZER Ph: (888) 401-6367 x703 Item ID: 7397

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

Email: Walker@lumbermensco.com off onto a conveyor. This is a very

2014 BARKO 595ML 13428 Victory Ln. // PO Box 124 Adams Center,LOADER NY 13606 KNUCKLEBOOM Item ID: 7460 Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

2001 PRENTICE 120C

Contact: WALKER

‘05 Gehl CTL 70

‘83 John Deere 1996 TIMBERJACK 450C 4850

Item ID: 14073 GRAPPLE SKIDDER W/WINCH Contact:Item Austin ID: 7449 Ph: (888) 401-6367 x703 Contact: WALKER

Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

2019 JOHN DEERE 859M

Item ID 13644. Sam x702

TRACKED FELLER BUNCHER FIREWOOD PROCESSORS Item ID: 7431

2010 Shop Built Wood Processor Contact: WALKER

- ItEmail: has a 353 Detroit diesel, 40 Walker@lumbermensco.com Phone: EXT 707 inch insert888-401-6367 tooth circle saw, 30 foot

 Issue 364 441

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 2003 JOHN DEERE 548G3

chain conveyer, 8 way splitter, on

GRAPPLE SKIDDER W/WINCH

20,000lb goose trailer. Item ID Itemneck ID: 7454 13916.

Austin x703 Contact: WALKER

Walker@lumbermensco.com Email: Best Value Portable Log Splitter Phone: 888-401-6367 EXT 707

- Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

2001 TIGERCAT 230B

One owner and comes with all

LOG LOADER

manuals and Purchased Itemreceipts.

ID: 8160 new for $32,500.

Item ID 13865.

Contact: WALKER

Walker@lumbermensco.com Email: Sam x702 Phone: 888-401-6367 EXT 707

LOGGING EQUIPMENT BANDIT

Buying?

50% or better. 475 hp Cummins

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off

ItemBARKO ID: 7442 1994 Barko 160B - Electric Contact: WALKER

grapple, 5,000 original hours.

but electronic option is available.

adjustable to single two way. Great

capacity!.

Item ID 13421. Sam x702 SKIDDER W/WINCH

Sam x702

well built processor. Item ID 13820.

1999 Bandit 1900 Tracked Disc

Has Log Lift. Uses 4-way wedge

1993 FRANKLIN 405 GRAPPLE

Email: Walker@lumbermensco.com knuckleboom, 30' boom, 75hp

Handles logs up to 32”. Uses

13HP Honda motor. Manual start

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Phone: 888-401-6367 EXT 707

Firewood Processor - This is

H O T

B U Y S

‘13 KMC 2500 Track Skidder

Chipper - Cat Under Carriage at

Phone: 888-401-6367 EXT 707

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

JOHN DEERE 648E

Item ID 13185. Sam x702

GRAPPLE SKIDDER

1999 Barko 160D new engine with Item ID: -8168 approximately 1500 hours. Hour Contact: WALKER

Walker@lumbermensco.com Email: dont meter work. The last 2 owners Phone: 888-401-6367 EXT 707

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

Selling?

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

lumbermensco.com • 888.401.6367

of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 23

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM “Precision Under Pressure”

1995 TIMBCO 425B Item ID: 8030 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

2014 MORBARK NCL

‘16 Halverson H140 Skidsteer (DEMO)

MODEL 23 Item ID: 8024

Item ID: JW-909632 2011 JOHN DEERE 437D Contact: J Williams Item ID: 7999x701 Ph: (888) 401-6367

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703 2015 JOHN DEERE 700K Item ID: 7968 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘95 John Deere C6 Tree Farmer

L O G G I N G

‘13 KMC 2500 Track Skidder 13428 Victory Ln. // PO Box 124 2015 JOHN DEERE 643K 2013 PRENTICE 2384 Adams Center, Item ID: 7961NY 13606 Item ID: 7954 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID: 14078 TIMBERJACK Contact: Austin 240C Item ID: 7948x703 Ph: (888) 401-6367

capacity!.Item ItemID: ID7943 13421. Sam x702

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 off onto a conveyor. This is a very (C) 931-797-8029

Contact: AUSTIN 1994 Barko 160B - Electric Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 knuckleboom, 30' boom, 75hp (C) 931-797-8029

Sam x702

grapple, 5,000 original hours.

well built processor. Item ID 13820.

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850 2017 TIGERCAT 630E

Item ID:Item 14073 ID: 7928 Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703 Email: Austin@lumbermensco.com

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 2016 JOHN DEERE 344K WHEEL LOG LOADER

chain conveyer, 8 way splitter, on Item ID: 7727 20,000lb goose neck trailer. Item ID

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN 13916. x703 Email:Austin Austin@lumbermensco.com Phone: 888-401-6367 EXTSplitter 703 Best Value Portable Log (C) 931-797-8029

condition. Easily produces high

made the best valued log splitter.

with 1700 hours, in very good

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

BELL FELLER Item ID ULTRA 13644. C Sam x702BUNCHER Item ID: 7579 FIREWOOD PROCESSORS Contact: AUSTIN 2010 Shop Built Wood Processor Email: Austin@lumbermensco.com - ItPhone: has a 353 Detroit diesel, 40 888-401-6367 EXT 703 931-797-8029 inch insert(C)tooth circle saw, 30 foot

 Issue 364 441

- Small manufacturer in PA has

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and

1996 CAT D4H TSK

amp gauges. Cuts logs up to 16”.

TRACK DOZER

One owner and comes with all Item ID: 7695 manuals and receipts. Purchased

Contact: AUSTIN new forAustin@lumbermensco.com $32,500. Item ID 13865.

Email: Phone: 888-401-6367 EXT 703 Sam x702 (C) 931-797-8029

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702

2019 PONSEE Firewood Processor -BUFFALO This is a

FORWARDER homemade processor with a 10’ Item ID: 7575 grapple, log deck. Has a hydraulic Contact: chain and AUSTIN kicker that all runs off Email: Austin@lumbermensco.com ofPhone: a 4 cylinder Mercedes 888-401-6367 EXTpower 703 931-797-8029 unit. Has(C) a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 VOLVO WHEEL 2004 Bandit BeastL150E Model 4680 -

LOADER WITH LARGE GRAPPLE 3412 Caterpillar Diesel engine Item ID: 7532 with 850 HP. 5300 hrs. Mill in Contact: SAM Just finished 10 good condition.

Email: Sam@lumbermensco.com Acre clearing job, ready work!

Phone: 888-401-6367 EXTto 702 (C) 615-596-4148 Remote control.

Big production

 List  seLL  exchange  buy  save

PRENTICE 410

BARKO

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

BARKO 275B TRACKED LOADER Item ID 13185. Sam x702 Item ID: 7660

1999 Barko 160D - new engine with

Contact: AUSTIN approximately 1500 hours. Hour Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 meter dont work. The last 2 owners (C) 931-797-8029

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam

2023 DIAMOND MILLER

x702

STUMP BELL GRINDER Item ID: 7477

1990 Bell Super T - This Bell has Contact: WALKER

aEmail: brandWalker@lumbermensco.com new Duetz engine. Lever

Phone: 888-401-6367 EXTand 707tranny control, 33” bar, pump

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at Boonville, New York www.LumberMB\ISmagazine.com www.starwebhosting.net/woodsmen/

The Tree

thatHOOD Started 2010 20000

FELLER BUNCHER Item ID: 6965

LOGGING & HEAVY EQUIPMENT EXPO Contact: AUSTIN Thurs, 7 Sept - Sat, 9 Sept Email: Austin@lumbermensco.com

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR John Williams518 CATERPILLAR

(888) 401-6367 ext. 702 sam@lumbermens.co

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS May be sent to­ 90′ TJ 480B GRAPPLE SKIDDER morris@lumbermens.co Item ID: 8076 Contact:POSTMASTER JOE Email: SendJoe@lumbermensco.com address changes to: Phone: 888-401-6367 EXT 709 Lumberman's Exchange (C) 801-362-2170 P.O. Box 1916

Columbia, TN 38402

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers TIMBERJACK 208 and writers, the Lumberman's Item ID: 5320 Exchange, its principles and associates, not held liable for Contact: are AUSTIN errors or Austin@lumbermensco.com omissions. Reproduction, Email: inPhone: whole or part, is prohibited with­ 888-401-6367 EXT 703 out written (C)consent.

931-797-8029 ©2017 Woods Publishing

1997 MODEL MORBARK

TUB feed1200 deck 20 footGRINDER out feed deck Item ID: 5573 with 44 inch wheels, and all the

Contact: JOE bells and whistles, its a production Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 machine, with air strain conveyers (C) 801-362-2170

that go up and down, with airbags, it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

LOG LOADER Item ID: 4160 Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx 2001 TJ 360 CABLE SKIDDER Item ID: 8136

THE Contact: PAUL BUNYAN SHOW JOE Fri,Email: 6 Oct Sun, 8 Oct Joe@lumbermensco.com Phone: 888-401-6367 Cambridge, Ohio EXT 709 (C) 801-362-2170 www.ohioforest.org

Item ID 13876. Austin x703

1996 S & WMODEL 125 BandTIMBERJACK Mill with

380C CABLE SKIDDER Caterpillar generator - Low hours Item ID: 4825 on the mill, electronic computer Set

Contact: AUSTIN works,1 1/2" or 2" band, 22ft. track Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 (C) 931-797-8029

hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

CARRIAGES & DRIVES

WOODSHOP EQUIPMENT FOR SALE Item ID: 7406

1. Nissan forklift with 4,975 hours

B & B42″ Mfg . ...............................

18 has forks with side shifter

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

2. Foley below-planer Molder, blades included. 1989 model 804 3. Optima Scale pallet, Truck with Baker ......................................

5, 7 built in scale. MODEL- OP-918W-5K Bell's Machining .....................

27 4. NEW TWB40 Tora Max Electric Walkie MODEL-TWB40. 5. 30″ OliBrute ForceBandsaw Mfg. .....................

31 ver Vertical 28″ x 26″ table.

MODEL-217-S 6.

Classic Fence Buck Equipment (AIM) ........ 36 w/standard rails, MODEL-W2005 7. NEW Custom movable fence for Corley Mfg ..............................

32 Oliver. 8. Tannewitz 30″ Bandsaw CRD Metalworks ....................

25 MODEL-PH 9. Kreg Bandsaw Fence MODEL-KMS7200 Carter products CW 17 guideMill-ArmorHog Assembly 10. ..............

Northfield No. 7 Surface Planer, 25″ SKH CW Mill-Hogzilla ................... 15 planer-15HP.DMD,8″ shavings hood with knife grinder/joining Dyna Products ........................at35 tachment; 2 manuals, RE-BUILT, Empire Hydraulics ...................

4-Knife cutterhead Knife set, Dial-8 type Knife & roll setting gauge 11.

Great Lakes 34 Diehl Rip sawMfg with. .................... idle conveyor and manual, MODEL-SL52, 1970 Hahn Machinery ...................... 3 PRE-OWNED W/IDLE conveyor & manualBoiler wrench 1.75″ open End, Hurst .............................

14 MODEL-482-0013 12. Hazel thorn Iron ChopBull saw ................................... 21

Contact: WALKER Mor bark .....................................

9

Email: Walker@lumbermensco.com

Multitek ...................................

Phone: 888-401-6367 EXT 707 12

drive, hyd pac for carriage,

2005 MODEL JOHN DEERE sawyers cab, computer controls,

2054 LOG LOADER cabinet with electronic drives for Item ID: 4094 carriage knees, husk including

Contact: JOE 48" bottom saw and 36" top saw Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

STACKING RAC

Piper's Saw Shop.................... 13 Rotochopper............................ 40 Row Electric ............................ 20 Sawmill Exchange .................. 11 Select Sawmill ......................... 19 Smith Sawmill ........................... 4 The Paul Bunyan Show ......... 39

2022Industrial TIMBERPRO 755D Thomas Controls ..... 10 Item ID: 7924 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN

Lignomat .................................

24 Phone: 888-401-6367 EXT 707

WoodMizer ................................ l (C) 931-797-8029

❘

Carriage line it includes carriage with onboard log turners, carriage

JOHN DEERE 450G DOZER

Email: Austin@lumbermensco.com Universal Refiner ................... 23

- USED FORESTRY EQUIPMENT FOR SALE

Carriages (Sawmill) - Cardinal

Metal Detector's Inc. .............. 30

Kilgore ............................. 22 Contact:Saw WALKER Email: Walker@lumbermensco.com

2010 Cardinal HD Carriage

Menominee Saw ..................... 29

WITH WINCH Midwest Sharpening .............. 26 Item ID: 8153

L O G G I N G

DESIGN DIRECTOR

(C) 931-797-8029

1994 HOOD 24000

(888) 401-6367 ext. 701 GRAPPLE SKIDDER j@lumbermens.co Item ID: 5045

Contact: AUSTIN Donna Heninger Email: Austin@lumbermensco.com Phone: 888-401-6367REPS EXT 703 EQUIPMENT (C) 931-797-8029 Sam Wall

Escanaba, Michigan Phone: 888-401-6367 EXT 703

10 hours on this machine since it has been rebuilt, it has a 24foot in

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

ADVERTISING SALES

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas JOHN DEERE 540G II www.arkloggers.com CABLE SKIDDER 72ND ANNUAL GREAT LAKES Item ID: 5745

2001 BELL ULTRA T

it LOADER All! LOG

Item ID: 7060 Since 1986, Lumbermens has Contact: AUSTIN published a monthly circular Email: Austin@lumbermensco.com reaching sawmills, loggers, Phone: 888-401-6367 EXT 703 pallet makers, recyclers and (C) 931-797-8029 industrial woodworking plants worldwide.

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

Phone: 888-401-6367 EXT 703

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

TJ 450B GRAPPLE SKIDDER Item ID: 8117 Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 www.BakerProducts.net (C) 801-362-2170

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 25

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM “Precision Under Pressure”

‘16 Halverson H140 Skidsteer (DEMO)

2005 JOHN DEERE 548G3

TIGERCAT 610C

GRAPPLE SKIDDER Item ID: 7678

GRAPPLE SKIDDER Item ID: 7630

2015ID: JOHN DEERE 648H Item JW-909632 GRAPPLE SKIDDER Contact: J Williams Item ID: 7599x701 Ph: (888) 401-6367

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) x703 2004401-6367 CAT 525B GRAPPLE SKIDDER Item ID: 7349 Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

‘95 John Deere C6 Tree Farmer

L O G G I N G

1990 JOHN DEERE 540B

2017 CAT 525D

13428 Victory Ln. // PO Box 124 CABLE SKIDDER Adams Center, Item ID: 7327NY 13606 Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

GRAPPLE SKIDDER Item ID: 7253

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

‘13 KMC 2500 Track Skidder 2013 JOHN DEERE 648H Item ID: 14078 GRAPPLE SKIDDER Contact: Austin Item ID: 7245x703 Ph: (888) 401-6367

GRAPPLE SKIDDER capacity!. Item ID 13421. Sam x702 Item ID: 6927

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 off onto a conveyor. This is a very (C) 801-362-2170

Contact: JOE 1994 Barko 160B - Electric Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 knuckleboom, 30' boom, 75hp (C) 801-362-2170

Sam x702

grapple, 5,000 original hours.

well built processor. Item ID 13820.

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 98′ John Deere JOHN DEERE 648G 4850GRAPPLE SKIDDER

Item ID:Item 14073 ID: 4510 Contact: Austin Contact: JOE Ph: (888) 401-6367 x703 Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

JOHN Item1993 ID 13644.

SamDEERE x702 540E Item ID: 8107 FIREWOOD PROCESSORS Contact: AUSTIN 2010 Shop Built Wood Processor

Email: Austin@lumbermensco.com - ItPhone: has a 353 Detroit diesel, 40 888-401-6367 EXT 703 931-797-8029 inch insert(C)tooth circle saw, 30 foot

 Issue 364 441

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 1991 FRANKLIN 170 GRAPPLE SKIDDER

chain conveyer, 8 way splitter, on Item ID: 5093 20,000lb goose neck trailer. Item ID Contact: JOE

13916. x703 Email:Austin Joe@lumbermensco.com

Phone: 888-401-6367 EXTSplitter 709 Best Value Portable Log (C) 801-362-2170

- Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and

00′ CLARK H67

amp gauges. Cuts logs up to 16”.

GRAPPLE SKIDDER

One owner and comes with all Item ID: 4122 manuals and receipts. Purchased Contact: JOE

new forJoe@lumbermensco.com $32,500. Item ID 13865.

Email: Phone: 888-401-6367 EXT 709 Sam x702 (C) 801-362-2170

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

JOHN DEEREwith 540B homemade processor a 10’ Item ID: 8099 log deck. Has a hydraulic grapple, Contact: chain and AUSTIN kicker that all runs off

Email: Austin@lumbermensco.com ofPhone: a 4 cylinder Mercedes 888-401-6367 EXTpower 703 931-797-8029 unit. Has(C) a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 -

99′ JOHN DEERE 648G2 3412 Caterpillar Diesel engine Item ID: 8052 with 850 HP. 5300 hrs. Mill in

Contact: AUSTINJust finished 10 good condition.

Email: Austin@lumbermensco.com Acre clearing job, ready work!

Phone: 888-401-6367 EXTto 703 931-797-8029 Remote (C) control.

Big production

 List  seLL  exchange  buy  save

2007 CAT 525C

BARKO

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

2010 JOHN DEERE 748H

Item ID 13185. Sam x702 Item ID: 8038 1999 Barko 160D - new engine with

Contact: AUSTIN approximately 1500 hours. Hour Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 meter dont work. The last 2 owners (C) 931-797-8029

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

1997 CAT 515 Item ID: 8045 BELL

Contact: 1990 BellAUSTIN Super T - This Bell has Email: Austin@lumbermensco.com a brand new Duetz engine.

Phone: 888-401-6367 EXT 703Lever 931-797-8029 control,(C) 33” bar, pump and tranny

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at Boonville, New York www.LumberMB\ISmagazine.com www.starwebhosting.net/woodsmen/

The Tree that Started 1996 TIMBERJACK 380C it All!

Item ID: 4825 Since 1986, Lumbermens has Contact: AUSTIN published a monthly circular Email: Austin@lumbermensco.com reaching sawmills, loggers, Phone: 888-401-6367 EXT 703 pallet makers, recyclers and (C) 931-797-8029 industrial woodworking plants worldwide.

1997 TIMBERJACK 360C GRAPPLE SKIDDER Item ID: 7080

Hot Springs, Arkansas www.arkloggers.com JOHN DEERE 540D 72ND ANNUAL GREAT LAKES Item ID: 5249

LOGGING & HEAVY EQUIPMENT EXPO

it includes two sets of Mcdonough

MID-ATLANTIC

LOGGING & BIOMASS EXPO

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

Contact: AUSTIN Donna Heninger Email: Austin@lumbermensco.com Phone: 888-401-6367REPS EXT 703 EQUIPMENT (C) 931-797-8029 Sam Wall

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

AD SUBMISSIONS 98′May JOHN DEERE be sent to­640G Item ID: 2694 morris@lumbermens.co

feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx FMC 210 Item ID: 5526

THE Contact: PAUL BUNYAN SHOW AUSTIN Fri,Email: 6 Oct Sun, 8 Oct Austin@lumbermensco.com Phone: 888-401-6367 Cambridge, Ohio EXT 703 (C) 931-797-8029 www.ohioforest.org

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

86′ TIMBERJACK 230A

Bell's Machining ..................... 27 Item ID: 3605 Brute Force Mfg. ..................... 31

1983 JOHN DEERE 640C30 Metal Detector's Inc. ..............

Item ID: 5582 Midwest Sharpening.............. 26

Email:Equipment Joe@lumbermensco.com Buck (AIM) ........ 36

Email: Austin@lumbermensco.com Mor bark ..................................... 9

Corley (C) Mfg .............................. 32 801-362-2170

Multitek(C) ...................................

12 931-797-8029

Columbia, TN 38402

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers TIMBERJACK 208 and writers, the Lumberman's Item ID: 5320 Exchange, its principles and associates, not held liable for Contact: are AUSTIN errors or Austin@lumbermensco.com omissions. Reproduction, Email: inPhone: whole or part, is prohibited with­ 888-401-6367 EXT 703 out written (C)consent.

931-797-8029 ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

JOHN DEERE......................

440C’S Hahn Machinery 3

The Paul Bunyan Show ......... 39

PACKAGE DEAL Hurst Boiler .............................

14 Item ID: 1966 Iron Bull ................................... 21

FRANKLIN 170 SKIDDER Thomas Industrial Controls ..... 10 Item ID: 3517 Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22 Email: Austin@lumbermensco.com

Universal Refiner ................... 23 Email: Joe@lumbermensco.com

Lignomat ................................. 24 (C) 931-797-8029

WoodMizer ................................ l (C) 801-362-2170

Contact:POSTMASTER AUSTIN Email: SendAustin@lumbermensco.com address changes to: Phone: 888-401-6367 EXT 703 Lumberman's Exchange (C) 931-797-8029 P.O. Box 1916

is an extremely accurate machine

Item ID 13876. Austin x703 S & W 125 Band Mill with

98′ JOHN DEERE- Low 640Ehours Caterpillar generator Item ID: 2701 on the mill, electronic computer Set

Contact: AUSTIN works,1 1/2" or 2" band, 22ft. track Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 (C) 931-797-8029

hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

is supported on both sides. This

Contact: JOE

Phone: 888-401-6367 EXT 709

Contact: AUSTIN

Phone: 888-401-6367 EXT 703

- USED FORESTRY EQUIPMENT FOR SALE

❘

Contact: AUSTIN

Phone: 888-401-6367 EXT 703

Contact: JOE

Phone: 888-401-6367 EXT 709

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

L O G G I N G

CAT 225LC EXCAVATOR Item ID: 5419

(888) 401-6367 ext. 702 sam@lumbermens.co

that go up and down, with airbags,

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

John Williams (888) 401-6367 ext. 701 02′ JOHN DEERE 640G2 j@lumbermens.co Item ID: 4710

MAILING ADDRESS

90′ TIMBERJACK 240A

feed deck 20 foot out feed deck Item ID: 5082 with 44 inch wheels, and all the

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

DESIGN DIRECTOR

10 hours on this machine since it has been rebuilt, it has a 24foot in

Contact: AUSTIN bells and whistles, its a production Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 machine, with air strain conveyers (C) 931-797-8029

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Contact: AUSTIN Contact: AUSTIN 7 Sept - Sat, 9 Sept Email: Austin@lumbermensco.comThurs, Email: Austin@lumbermensco.com Escanaba, Michigan Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 (C) 931-797-8029 (C) 931-797-8029

PUBLISHER

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

with onboard log turners, carriage drive, hyd pac for carriage,

2001cab, CATcomputer 517 SWING sawyers controls, BOOM TRACK SKIDDER cabinet with electronic drives for ID: 7286 carriage Item knees, husk including

Contact: AUSTIN 48" bottom saw and 36" top saw Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

STACKING RAC JOHN DEERE 440C Item ID: 5242

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net (C) 931-797-8029

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 27

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM “Precision Under Pressure”

‘16 Halverson H140 Skidsteer (DEMO)

1999 JOHN DEERE 640G CABLE SKIDDER Item ID: 7314

PRENTICE 210B Item ID: 5085

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘93 Barko 180B

Item ID: JW-909632 2022 TIGERCAT Contact: J Williams620H Item ID: 5334x701 Ph: (888) 401-6367

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703 TAJFUN EQUIPMENT Item ID: 5368

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘95 John Deere C6 Tree Farmer

L O G G I N G

‘13 KMC 2500 Track Skidder 13428 Victory 643JLn. // PO Box 124 BELL SUPER T CUTTER Adams Center, Item ID: 4907NY 13606 Item ID: 4952 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID: 14078 13′ BARKOAustin 595ML MAGNUM Contact: Item ID: 4974x703 Ph: (888) 401-6367

capacity!.Item ItemID: ID5358 13421. Sam x702

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 off onto a conveyor. This is a very (C) 931-797-8029

Contact: AUSTIN 1994 Barko 160B - Electric Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 knuckleboom, 30' boom, 75hp (C) 931-797-8029

Sam x702

grapple, 5,000 original hours.

well built processor. Item ID 13820.

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850 TIMBERJACK 1270

Item ID:Item 14073 ID: 5199 Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

TIGERCAT Item ID 04′ 13644.

Sam x702 620 Item 4705 FIREWOOD ID: PROCESSORS

Contact: AUSTIN 2010 Shop Built Wood Processor

Email: Austin@lumbermensco.com - ItPhone: has a 353 Detroit diesel, 40 888-401-6367 EXT 703 931-797-8029 inch insert(C) tooth circle saw, 30 foot

 Issue 364 441

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 2016 TAJFUN 400 JOY

chain conveyer, 8 way splitter, on Item ID: 5227 20,000lb goose neck trailer. Item ID Contact: AUSTIN

13916. x703 Email:Austin Austin@lumbermensco.com

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and

LIEBHERR A312 amp gauges.

Cuts logs up to 16”.

WITHand RYANS One owner comesHEAD with all Itemreceipts.

ID: 4979 manuals and Purchased Contact: AUSTINItem ID 13865. new for $32,500.

- Small manufacturer in PA has

Email: Austin@lumbermensco.com Sam x702 Phone: 888-401-6367 EXT 703 (C) 931-797-8029 LOGGING EQUIPMENT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

Phone: 888-401-6367 EXT 703 Best Value Portable Log Splitter (C) 931-797-8029

made the best valued log splitter.

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

18′ JOHN DEERE 753J homemade processor with a 10’ Item ID: 4968 log deck. Has a hydraulic grapple, Contact: AUSTINthat all runs off chain and kicker

Email: Austin@lumbermensco.com ofPhone: a 4 cylinder Mercedes 888-401-6367 EXTpower 703 931-797-8029 unit. Has(C) a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

BANDIT

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 -

CAT D5H TSK 3412 Caterpillar Diesel engine Item ID: 4939 with 850 HP. 5300 hrs. Mill in

Contact: AUSTINJust finished 10 good condition.

Email: Austin@lumbermensco.com Acre clearing job, ready work!

Phone: 888-401-6367 EXTto 703 (C) 931-797-8029 Remote control.

Big production

 List  seLL  exchange  buy  save

TIMBERJACK 1010

BARKO

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

CAT 538

Item ID 13185. Sam x702 Item ID: 5302 1999 Barko 160D - new engine with Contact: AUSTIN

approximately 1500 hours. Hour Email: Austin@lumbermensco.com

Phone:dont 888-401-6367 EXT 703 meter work. The last 2 owners (C) 931-797-8029

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702 TIMBCO 445EXL Item ID: 5293 BELL

Contact: 1990 BellAUSTIN Super T - This Bell has

Email: Austin@lumbermensco.com

aPhone: brand888-401-6367 new Duetz engine.

EXT 703Lever

931-797-8029 control,(C) 33” bar, pump and tranny

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at Boonville, New York www.LumberMB\ISmagazine.com www.starwebhosting.net/woodsmen/

The Tree

TIMBERJACK 380C that Started

GRAPPLE SKIDDER it All! Item ID: 863

Since 1986, Lumbermens has Contact: SAM published a monthly circular Email: Sam@lumbermensco.com reaching sawmills, loggers, Phone: 888-401-6367 EXT 702 pallet makers, recyclers and (C) 615-596-4148 industrial woodworking plants worldwide.

LOGGING & HEAVY EQUIPMENT EXPO

it includes two sets of Mcdonough

MID-ATLANTIC

LOGGING & BIOMASS EXPO

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

Contact: MOSE Phone: 208-290-1888

Contact:POSTMASTER JOE Email: SendJoe@lumbermensco.com address changes to: Phone: 888-401-6367 EXT 709 Lumberman's Exchange (C) 801-362-2170 P.O. Box 1916

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

’92 TIMBERJACK 450C THE PAUL BUNYAN SHOW Item ID: 1369 Fri, 6 Oct - Sun, 8 Oct Contact: ROBERT Cambridge, Ohio Phone: 606-875-4783 www.ohioforest.org

Item ID 13876. Austin x703 S & W 125 Band Mill with

TIMBCO 425D Caterpillar generator - Low hours Item ID: 1429 on the mill, electronic computer Set

L O G G I N G

EXCAVATOR 225 LC Item ID: 1067

Contact: AUSTIN works,1 1/2" or 2" band, 22ft. track Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 (C) 931-797-8029

hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

AD SUBMISSIONS 16′ 700K May beJD sent to­ Item ID: 4343 morris@lumbermens.co

that go up and down, with airbags,

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

LOG LOADER

(888) 401-6367 ext. 702 sam@lumbermens.co

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

PROCESSOR

feed deck 20 foot out feed deck Item ID: 2593 with 44 inch wheels, and all the

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

(888) 401-6367 ext. 701 KNUCKLEBOOM LOADER j@lumbermens.co Item ID: 978 DESIGN DIRECTOR

MAILING ADDRESS

2016 HYPRO 755HB

Contact: AUSTIN bells and whistles, its a production Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 machine, with air strain conveyers (C) 931-797-8029

MARKETING DIRECTOR PRENTICE 384 John Williams

Contact: AUSTIN Donna Heninger Email: Austin@lumbermensco.com Phone: 888-401-6367REPS EXT 703 EQUIPMENT (C) 931-797-8029 Sam Wall

10 hours on this machine since it has been rebuilt, it has a 24foot in

Contact: AUSTIN Contact: AUSTIN 7 Sept - Sat, 9 Sept Email: Austin@lumbermensco.comThurs, Email: Austin@lumbermensco.com Escanaba, Michigan Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 (C) 931-797-8029 (C) 931-797-8029

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com 2009 JOHN DEERE 548G3 725B TIMBERPRO 72ND ANNUAL GREAT LAKES Item ID: 4699 Item ID: 1398

PUBLISHER

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw .....................

2019 JOHN DEERE 648L229

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal GRAPPLE Detector's SKIDDER Inc. .............. 30 Item ID: 7308 Midwest Sharpening.............. 26

cabinet with electronic drives for

1979 TIMBERJACK 230

CABLE SKIDDER Brute Force Mfg. ..................... 31 Item ID: 1072

Phone: 807-631-4081 Corley Mfg .............................. 32

Contact: KYLE

Contact: AUSTIN Email: Austin@lumbermensco.com Mor bark ..................................... 9 Phone: 888-401-6367 EXT 703 Multitek(C) ...................................

12 931-797-8029

Columbia, TN 38402

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been madeJOHN to ensure accuracy of 2009 DEERE 540G3 content submitted by advertisers CABLE SKIDDER and writers, the Lumberman's Exchange, its principles and Item ID: 7299 associates, are not held liable for Contact: AUSTIN errors or omissions. Reproduction, Email: Austin@lumbermensco.com in whole or part, is prohibited with­ Phone: 888-401-6367 EXT 703 out written (C)consent.

931-797-8029 ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

14′Boiler JOHN.............................

DEERE 748H 14 Hurst Item ID: 2707 Iron Bull ................................... 21

JOHN DEERE 648D..... 10 Thomas Industrial Controls Item ID: 547 Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22 Email: Austin@lumbermensco.com

Universal Refiner ................... 23 Email: Sam@lumbermensco.com

Lignomat ................................. 24 (C) 931-797-8029

WoodMizer ................................ l (C) 615-596-4148

Buck Equipment (AIM) ........ 36

Contact: AUSTIN

Phone: 888-401-6367 EXT 703

- USED FORESTRY EQUIPMENT FOR SALE

❘

with onboard log turners, carriage drive, hyd pac for carriage,

carriage knees, husk including 460 TIMBERJACK Item ID:and 1124 48" bottom saw 36" top saw Contact: MARCUS Phone: 660-833-9061

STACKING RAC TIGERCAT 822 Item ID: 1130

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net (C) 931-797-8029

Contact: SAM

Phone: 888-401-6367 EXT 702

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 29

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM “Precision Under Pressure”

2019 PRENTICE 2384D

04′ JD 450H Item ID: 4327 Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

LOG LOADER Item ID: 7292 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘16 Halverson H140 Skidsteer (DEMO) 2015 CAT 525D Item ID: JW-909632 Contact: J Williams GRAPPLE SKIDDER Ph: (888) 401-6367 Item ID: 7054x701

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703 02′ CASE 650H Item ID: 3511 Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

‘95 John Deere C6 Tree Farmer

L O G G I N G

2005 BELL ULTRA C

‘13 KMC 2500 Track Skidder

13428 Victory Ln. // PO Box 124 FELLER BUNCHER Adams Center, NY 13606 Item ID: 7092 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

JOHN DEERE 848L Item ID: 1184

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID: 14078 15′ TIGERCAT Contact: Austin 610E Item ID: 4944x703 Ph: (888) 401-6367

capacity!.Item ItemID: ID1531 13421. Sam x702

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 off onto a conveyor. This is a very (C) 931-797-8029

Contact: AUSTIN 1994 160B - Electric Email:Barko Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 knuckleboom, 30' boom, 75hp (C) 931-797-8029

Sam x702

grapple, 5,000 original hours.

well built processor. Item ID 13820.

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 2015 INTERNATIONAL 5100 4850 BOOM PICKER TRUCK Item ID: 14073 Item ID: 7070 Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

90′Sam JD 550G Item ID 13644. x702 Item ID: 3873 FIREWOOD PROCESSORS

Contact: JOE Wood Processor 2010 Shop Built

Email: Joe@lumbermensco.com - ItPhone: has a 353 Detroit diesel, 40 888-401-6367 EXT 709 801-362-2170 inch insert(C) tooth circle saw, 30 foot

 Issue 364 441

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 QUADCO SAWHEAD chain conveyer,24C 8 way splitter, on Itemneck ID: 7065 20,000lb goose trailer. Item ID Contact: AUSTIN

13916.

Austin x703 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Best Value Portable Log Splitter (C) 931-797-8029

- Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

14′ TIGERCAT 720E

One owner and comes with all Item ID: 1617 manuals and receipts. Purchased Contact: AUSTIN

new forAustin@lumbermensco.com $32,500. Item ID 13865.

Email: Phone: 888-401-6367 EXT 703 Sam x702 (C) 931-797-8029

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

JD 648Lwith a 10’ homemade processor Item ID: 5073 log deck. Has a hydraulic grapple, Contact: JOE chain and kicker that all runs off

Email: Joe@lumbermensco.com ofPhone: a 4 cylinder Mercedes 888-401-6367 EXTpower 709 801-362-2170 unit. Has(C) a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 -

JD 550G LTengine 3412 Caterpillar Diesel Item ID: 3686 with 850 HP. 5300 hrs. Mill in

Contact: JOE good condition.

Just finished 10

Email: Joe@lumbermensco.com Acre clearing job, ready work!

Phone: 888-401-6367 EXTto 709 801-362-2170 Remote (C) control.

Big production

 List  seLL  exchange  buy  save

JOHN DEERE 643K

BARKO

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

14' JD 650K LGP

Item ID 13185. Sam x702 Item ID: 3574 1999 Barko 160D - new engine with Contact: JOE

approximately 1500 hours. Hour Email: Joe@lumbermensco.com

Phone:dont 888-401-6367 EXT 709 meter work. The last 2 owners (C) 801-362-2170

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702 JOHN DEERE 753J Item ID: 1582 BELL

Contact: 1990 BellAUSTIN Super T - This Bell has Email: Austin@lumbermensco.com a brand new Duetz engine.

Phone: 888-401-6367 EXT 703Lever 931-797-8029 control,(C) 33” bar, pump and tranny

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at Boonville, New York www.LumberMB\ISmagazine.com www.starwebhosting.net/woodsmen/

The Tree that Started CAT D6K2 it All!

Item ID: 1488 Since 1986, Lumbermens has Contact: JOE published a monthly circular Email: Joe@lumbermensco.com reaching sawmills, loggers, Phone: 888-401-6367 EXT 709 pallet makers, recyclers and (C) 801-362-2170 industrial woodworking plants worldwide.

LOGGING & HEAVY EQUIPMENT EXPO

Contact: JOE Contact: AUSTIN Thurs, 7 Sept - Sat, 9 Sept Email: Joe@lumbermensco.com Email: Austin@lumbermensco.com Escanaba, Michigan Phone: 888-401-6367 EXT 709 Phone: 888-401-6367 EXT 703 (C) 801-362-2170 (C) 931-797-8029

MID-ATLANTIC

LOGGING & BIOMASS EXPO

P.O. Box 1916 Columbia, TN 38402

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers 99′ FRANKLIN 170 and writers, the Lumberman's Item ID: 4586 Exchange, its principles and associates, Contact: are JOEnot held liable for errors or Joe@lumbermensco.com omissions. Reproduction, Email: inPhone: whole or part, is prohibited with­ 888-401-6367 EXT 709 out written (C)consent.

801-362-2170 ©2017 Woods Publishing

is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx 04′ TIMBERJACK 460D Item ID: 2724

Item ID 13876. Austin x703 S & W 125 Band Mill with

98′ JOHN DEERE 648hours Caterpillar generator - Low Item ID: 2798 on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Contact: AUSTIN Fri,Email: 6 Oct - Sun, 8 Oct Austin@lumbermensco.com

Contact: AUSTIN works,1 1/2" or 2" band, 22ft. track Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 (C) 931-797-8029

Phone: 888-401-6367 Cambridge, Ohio EXT 703 (C) 931-797-8029 www.ohioforest.org

hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

Contact:POSTMASTER JOE Email: SendJoe@lumbermensco.com address changes to: Phone: 888-401-6367 EXT 709 Lumberman's Exchange (C) 801-362-2170

is supported on both sides. This

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

Bell's Machining ..................... 27 Item ID: 2646 Brute Force Mfg. ..................... 31

2013 JOHN DEERE 848H

04′Detector's JOHN DEERE 648G330 Metal Inc. ..............

Item ID: 2791 Midwest Sharpening.............. 26

Email:Equipment Austin@lumbermensco.com Buck (AIM) ........ 36

Email: Austin@lumbermensco.com Mor bark ..................................... 9

Corley (C) Mfg .............................. 32 931-797-8029

Multitek(C) ...................................

12 931-797-8029

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

15′ CAT 525D Hurst Boiler .............................

14 Item ID: 3172 Iron Bull ................................... 21

CLARK F666Controls RANGER Thomas Industrial ..... 10 Item ID: 3233 Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22 Email: Joe@lumbermensco.com

Universal Refiner ................... 23 Email: Joe@lumbermensco.com

Lignomat ................................. 24 (C) 801-362-2170

WoodMizer ................................ l (C) 801-362-2170

Contact: AUSTIN

Phone: 888-401-6367 EXT 703

Contact: JOE

Phone: 888-401-6367 EXT 709

- USED FORESTRY EQUIPMENT FOR SALE

❘

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal

Carriage line it includes carriage

with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls,

02′ electronic TJ 660D drives for cabinet with Item ID: 4088 carriage knees, husk including

Contact: AUSTIN

Contact: JOE 48" bottom saw and 36" top saw Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Phone: 888-401-6367 EXT 703

STACKING RAC 12′ TIGERCAT 620D Item ID: 2753

Contact: JOE

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net (C) 931-797-8029

Phone: 888-401-6367 EXT 709

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

L O G G I N G

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

(888) 401-6367 ext. 702 sam@lumbermens.co

it includes two sets of Mcdonough

in ve1y good condition, Cuts 130

Contact: JOE Donna Heninger Email: Joe@lumbermensco.com Phone: 888-401-6367REPS EXT 709 EQUIPMENT (C) 801-362-2170 Sam Wall

AD SUBMISSIONS 12' JD LGP May be550K sent to­ Item ID: 3753 morris@lumbermens.co

that go up and down, with airbags,

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept 06′ TIGERCAT 635C Item ID: 3322

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

Contact: JOE bells and whistles, its a production Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 machine, with air strain conveyers (C) 801-362-2170

pressure guides. Top Casting wheel

John Williams (888) 401-6367 ext. 701 TJ 460D j@lumbermens.co Item ID: 3286

MAILING ADDRESS

00′ JD 748G III

feed deck 20 foot out feed deck Item ID: 3210 with 44 inch wheels, and all the

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

MARKETING DIRECTOR

DESIGN DIRECTOR

10 hours on this machine since it has been rebuilt, it has a 24foot in

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com 2004 JOHN DEERE 648G3 13′ JD 648H 72ND ANNUAL GREAT LAKES Item ID: 2628 Item ID: 3589

PUBLISHER

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 31

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM “Precision Under Pressure”

‘16 Halverson H140 Skidsteer (DEMO) 83′ TJ 380A Item ID: 2133 Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

13′ CAT 545C Item ID: 2117 Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

‘93 Barko 180B

Item ID: JW-909632 08′ JDJ 535 SERIES II Contact: Williams Item ID: 4580x701 Ph: (888) 401-6367

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703 10′ JOHN DEERE 648H Item ID: 1847

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘95 John Deere C6 Tree Farmer

L O G G I N G

‘13 KMC 2500 Track Skidder 13428 Victory Ln. // PO Box 124 CAT 515 Adams Center, Item ID: 1739NY 13606 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

17′ JD 437E Item ID: 4809

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

TIMBERJACK 240A Item ID: 14078 GRAPPLE SKIDDER Contact: Austin Item ID: 1769x703 Ph: (888) 401-6367

capacity!.Item ItemID: ID2109 13421. Sam x702

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 off onto a conveyor. This is a very (C) 931-797-8029

Contact: JOE 1994 Barko 160B - Electric Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 knuckleboom, 30' boom, 75hp (C) 801-362-2170

Sam x702

grapple, 5,000 original hours.

well built processor. Item ID 13820.

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 05′ VALMET 415 EX TRACK 4850 FELLER BUNCHER Item ID:Item 14073 ID: 8144 Contact: Austin Contact: JOE Ph: (888) 401-6367 x703 Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

15′ CATERPILLAR 553C in excellent condition. Runs great.

Item ID FELLER 13644. Sam x702 BUNCHER Item ID: 5495 FIREWOOD PROCESSORS

Contact: JOE Wood Processor 2010 Shop Built

Email: Joe@lumbermensco.com - ItPhone: has a 353 Detroit diesel, 40 888-401-6367 EXT 709 801-362-2170 inch insert(C)tooth circle saw, 30 foot

 Issue 364 441

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 15′ TIGERCAT 724 G

chain conveyer, 8 way splitter, on Item ID: 3392 20,000lb goose neck trailer. Item ID Contact: AUSTIN

13916. x703 Email:Austin Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Best Value Portable Log Splitter (C) 931-797-8029

- Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

TIMBERJACK 460

One owner and comes with all Item ID: 1777 manuals and receipts. Purchased Contact: AUSTIN

new forAustin@lumbermensco.com $32,500. Item ID 13865.

Email: Phone: 888-401-6367 EXT 703 Sam x702 (C) 931-797-8029

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

TIGERCAT homemade processor630E with a 10’ Item ID: 1098 log deck. Has a hydraulic grapple, Contact: AUSTINthat all runs off chain and kicker

Email: Austin@lumbermensco.com ofPhone: a 4 cylinder Mercedes 888-401-6367 EXTpower 703 931-797-8029 unit. Has(C) a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

KOMATSU XT445 L-5 20042019 Bandit Beast Model 4680 FELLER BUNCHER 3412TRACK Caterpillar Diesel engine Item ID: 7243 with 850 HP. 5300 hrs. Mill in

Contact: AUSTINJust finished 10 good condition.

Email: Austin@lumbermensco.com Acre clearing job, ready work!

Phone: 888-401-6367 EXTto 703 931-797-8029 Remote (C) control.

Big production

 List  seLL  exchange  buy  save

08′ JD 843J

BARKO

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

17′ JOHN DEERE 843L

Item ID 13185. Sam x702 Item ID: 2731 1999 Barko 160D - new engine with Contact: AUSTIN

approximately 1500 hours. Hour Email: Austin@lumbermensco.com

Phone:dont 888-401-6367 EXT 703 meter work. The last 2 owners (C) 931-797-8029

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam

16′ COOKS AE4P EDGER x702 Item ID: 5013 BELL

Contact: 1990 BellAUSTIN Super T - This Bell has

Email: Austin@lumbermensco.com

aPhone: brand888-401-6367 new Duetz engine.

EXT 703Lever

931-797-8029 control,(C) 33” bar, pump and tranny

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at Boonville, New York www.LumberMB\ISmagazine.com www.starwebhosting.net/woodsmen/

The Tree that Started 98′ PRENTICE it All! 280

Item ID: 2166 Since 1986, Lumbermens has Contact: JOE published a monthly circular Email: Joe@lumbermensco.com reaching sawmills, loggers, Phone: 888-401-6367 EXT 709 pallet makers, recyclers and (C) 801-362-2170 industrial woodworking plants worldwide.

ROTOSAW CUTTER Item ID: 3144

LOGGING & HEAVY EQUIPMENT EXPO Contact: JOE Thurs, 7 Sept - Sat, 9 Sept Email: Joe@lumbermensco.com

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

MARKETING DIRECTOR

DESIGN DIRECTOR

Contact: AUSTIN Donna Heninger Email: Austin@lumbermensco.com Phone: 888-401-6367REPS EXT 703 EQUIPMENT (C) 931-797-8029 Sam Wall

MID-ATLANTIC

LOGGING & BIOMASS EXPO

AD SUBMISSIONS 2014 PONSSE SCORPION May be sent to­ KING Item ID: 4914 morris@lumbermens.co

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN works,1 1/2" or 2" band, 22ft. track Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 (C) 931-797-8029

Item ID 13876. Austin x703

08′ TIMBCO 415EX Caterpillar generator - Low hours Item ID: 1661 on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Contact: JOE Fri,Email: 6 Oct - Sun, 8 Oct Joe@lumbermensco.com Phone: 888-401-6367 Cambridge, Ohio EXT 709 (C) 801-362-2170 www.ohioforest.org

hours ready to run. Item ID 13434.

Sam x702

** INFO LINK** B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

Bell's Machining ..................... 27 Item ID: 1480 Brute Force Mfg. ..................... 31

14′Detector's JOHN DEERE 437D 30 Metal Inc. ..............

Item ID: 2740 Midwest Sharpening.............. 26

Email:Equipment Austin@lumbermensco.com Buck (AIM) ........ 36

Email: Austin@lumbermensco.com Mor bark ..................................... 9

Corley (C) Mfg .............................. 32 931-797-8029

Multitek(C) ...................................

12 931-797-8029

Columbia, TN 38402

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers VALMET 840.2 FORWARDER and writers, the Lumberman's ID: 741 Exchange, itsItem principles and associates, are not held liable for Contact: AUSTIN errors or Austin@lumbermensco.com omissions. Reproduction, Email: inPhone: whole or part, is prohibited with­ 888-401-6367 EXT 703 out written (C)consent.

931-797-8029 ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

MORBARK 6036 CHIPPER14 Hurst Boiler .............................

Item ID: 1084 Iron Bull ................................... 21

JOHN DEERE 1270..... 10 Thomas Industrial Controls Item ID: 1350 Union Grove Saw & Knife.. 2, 37

Contact:POSTMASTER AUSTIN Email: SendAustin@lumbermensco.com address changes to: Phone: 888-401-6367 EXT 703 Lumberman's Exchange (C) 931-797-8029 P.O. Box 1916

that go up and down, with airbags,

S & W 125 Band Mill with

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

Contact: AUSTIN bells and whistles, its a production Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 machine, with air strain conveyers (C) 931-797-8029

Lexington, Kentucky 2004 PONSSE ERGO http://www.kfia.org/ KOBELCO 250 LOG LOADER KentuckyWoodExpo.aspx HARVESTER Item ID: 2584 Item ID: 2656

(888) 401-6367 ext. 702 sam@lumbermens.co

MAILING ADDRESS

(C) 801-362-2170

2004 PRENTICE 384

feed deck 20 foot out feed deck Item ID: 2637 with 44 inch wheels, and all the

VALMET 644

Contact: AUSTIN

Phone: 888-401-6367 EXT 703

Contact: SAM Kilgore Saw ............................. 22 Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 Lignomat ................................. 24 (C) 615-596-4148

- USED FORESTRY EQUIPMENT FOR SALE

❘

Contact: AUSTIN

Phone: 888-401-6367 EXT 703

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

with onboard log turners, carriage drive, hyd pac for carriage,

MORBARK MODEL 20

sawyers cab, computer controls,

CHIPHARVESTER cabinet with electronic drives for Item ID: 1246 carriage knees, husk including

Contact: SAM 48" bottom saw and 36" top saw Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 (C) 615-596-4148

STACKING RAC JOHN DEERE 85D Item ID: 1035

Contact: AUSTIN Universal Refiner ................... 23 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 WoodMizer ................................ l (C) 931-797-8029

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

L O G G I N G

John Williams (888) 401-6367 ext. 701 VALMET 840.4 j@lumbermens.co Item ID: 1222

Escanaba, Michigan Phone: 888-401-6367 EXT 709

10 hours on this machine since it has been rebuilt, it has a 24foot in

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com 08 ROTTNE H14 72ND ANNUAL GREAT LAKES Item ID: 2062

84' CAT 518

PUBLISHER

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

Contact: RON www.BakerProducts.net Phone: (606) 595-1734

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 33

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703 LIST

SELL

EXCHANGE

EST

BUY

SAVE

1986

‘95 John Deere C6 Tree Farmer

Visit our NEW Merchandise Store ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

‘83 John Deere 4850

chain conveyer, 8 way splitter, on

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter

with 1700 hours, in very good

- Small manufacturer in PA has

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

 Issue 364 441

tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

50% or better. 475 hp Cummins

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

chain and kicker that all runs off

inch insert tooth circle saw, 30 foot

low hours. Control panel includes

but electronic option is available.

log deck. Has a hydraulic grapple,

2010 Shop Built Wood Processor

with John Deere power unit with

1999 Bandit 1900 Tracked Disc

13HP Honda motor. Manual start

adjustable to single two way. Great

in excellent condition. Runs great.

automatice firewood processor

Handles logs up to 32”. Uses

Has Log Lift. Uses 4-way wedge

Brewco Saws - Two Brewco Saws

- It has a 353 Detroit diesel, 40

made the best valued log splitter.

a Chomper Model 16 PDA

of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

a brand new Duetz engine. Lever

www.lumbermenco.com

Lumbermens™  since 1986

❘

BELL

good condition. Just finished 10

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at Boonville, New York www.LumberMB\ISmagazine.com www.starwebhosting.net/woodsmen/

The Tree

Started 2000 2009that TIMBERKING it All! SAWMILL Item ID: 7001

Since 1986, Lumbermens has Contact: AUSTIN published a monthly circular Email: Austin@lumbermensco.com reaching sawmills, loggers, Phone: 888-401-6367 EXT 703 pallet makers, recyclers and (C) 931-797-8029 industrial woodworking plants worldwide.

LOGGING & HEAVY EQUIPMENT EXPO

MARKETING DIRECTOR Williams 2024 John HUDSON SAWYER DESIGN DIRECTOR

Contact: AUSTIN Donna Heninger Email: Austin@lumbermensco.com Phone: 888-401-6367REPS EXT 703 EQUIPMENT (C) 931-797-8029 Sam Wall

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

it includes two sets of Mcdonough

MID-ATLANTIC

LOGGING & BIOMASS EXPO

19′ MORGAN MILITARY AD SUBMISSIONS NOTCHING BAND May be sent to­SAW Item ID: 3567 morris@lumbermens.co

Contact:POSTMASTER JOE Email: SendJoe@lumbermensco.com address changes to: Phone: 888-401-6367 EXT 709 Lumberman's Exchange (C) 801-362-2170 P.O. Box 1916

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

S & W 125 Band Mill with

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN works,1 1/2" or 2" band, 22ft. track Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 (C) 931-797-8029

Item ID 13876. Austin x703

TAJFUNgenerator 480 PLUS JOYhours Caterpillar - Low Item ID: 568 on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Contact: SAM Fri,Email: 6 Oct - Sun, 8 Oct Sam@lumbermensco.com Phone: 888-401-6367 Cambridge, Ohio EXT 702 (C) 615-596-4148 www.ohioforest.org

hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

that go up and down, with airbags,

Lexington, Kentucky http://www.kfia.org/ 17′ COOKS AC36 SAWMILL KentuckyWoodExpo.aspx CORNELL SIZER Item ID: 5019 Item ID: 1322

(888) 401-6367 ext. 702 sam@lumbermens.co

MAILING ADDRESS

with 44 inch wheels, and all the

Contact: AUSTIN bells and whistles, its a production Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 machine, with air strain conveyers (C) 931-797-8029

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

with onboard log turners, carriage drive, hyd pac for carriage,

2021 BAKER 3674CD 2020 WOODMIZER EG200 Saw .....................

29 Baker ......................................

5, 7 Menominee PORTABLE BAND SAWMILL TWIN BLADE EDGER COMPLETE OPERAION Bell's Machining ..................... 27 Metal Detector's Inc. .............. 30 Item ID: 7303 Item ID: 7259 Brute Force Mfg. ..................... 31

Contact: AUSTIN Email:Equipment Austin@lumbermensco.com Buck (AIM) ........ 36 Phone: 888-401-6367 EXT 703 Corley (C) Mfg .............................. 32 931-797-8029

Midwest Sharpening.............. 26 Contact: AUSTIN

Email: Austin@lumbermensco.com Mor bark ..................................... 9 Phone: 888-401-6367 EXT 703

931-797-8029 Multitek(C) ...................................

12

Columbia, TN 38402

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have 2021 been madeWOODMIZER to ensure accuracyLT-70 of content submitted by advertisers SUPER WIDE SAWMILL and writers, the Lumberman's Item ID: 7320 Exchange, its principles and associates, not held liable for Contact: are AUSTIN errors or Austin@lumbermensco.com omissions. Reproduction, Email: inPhone: whole or part, is prohibited with­ 888-401-6367 EXT 703 out written (C)consent.

931-797-8029 ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

2016 WOODMIZER LT-40HD Hurst Boiler .............................

14 Item ID: 5632 Iron Bull ................................... 21

2017Industrial HURDLEControls SAWMILL Thomas ..... 10 Item ID: 5025 Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22 Email: Austin@lumbermensco.com

Universal Refiner ................... 23 Email: Austin@lumbermensco.com

Lignomat ................................. 24 (C) 931-797-8029

WoodMizer ................................ l (C) 931-797-8029

Contact: AUSTIN

Phone: 888-401-6367 EXT 703

- USED FORESTRY EQUIPMENT FOR SALE

❘

Contact: AUSTIN

Phone: 888-401-6367 EXT 703

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

S A W M I L L

(888) 401-6367 ext. 701 SAWMILL j@lumbermens.co Item ID: 6881

10 hours on this machine since it 2010 WOODMIZER LT-300 PORTABLE has been rebuilt, it BAND has a 24foot in SAWMILL OPERATION feed deck 20 foot out feed deck Item ID: 7272

Contact: AUSTIN Contact: AUSTIN 7 Sept - Sat, 9 Sept Email: Austin@lumbermensco.comThurs, Email: Austin@lumbermensco.com Escanaba, Michigan Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 (C) 931-797-8029 (C) 931-797-8029

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com FENCE POST PROCESSING 2014 BAKER 13′ SAWMILL 72ND ANNUAL GREAT LAKES Item ID: 1231 Item ID: 4910

PUBLISHER

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

sawyers cab, computer controls,

HURDLE SAWMILL cabinet with electronic drives for Item ID: 4949 carriage knees, husk including

Contact: AUSTIN 48" bottom saw and 36" top saw Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

STACKING RAC

PRECISION 742H DEBARKER Item ID: 5350 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net (C) 931-797-8029

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 35

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

S A W M I L L S

“Precision Under Pressure”

2021 WOODMIZER LT-70

2008 TIMBERKING 2200

SUPER WIDE Item ID: 7938

BAND SAWMILL Item ID: 7710

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘16 Halverson H140 Skidsteer (DEMO) 2019 WOODMIZER LX450 Item ID: JW-909632 BAND SAWMILL Contact: J Williams Item ID: 7621 Ph: (888) 401-6367 x701

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID: 14077 Contact: Austin HURDLE 2HB SAWMILL Ph: (888) 401-6367 x703 OPERATION Item ID: 7553 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘95 John Deere C6 Tree Farmer

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 off onto (C) a conveyor.

This is a very 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 703 knuckleboom, 30' boom, 75hp (C) 931-797-8029

Sam x702

grapple, 5,000 original hours.

well built processor. Item ID 13820.

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850 CSI 4400 SLASHER

Item ID:Item 14073 ID: 6786 Contact: Austin Contact: SAM Ph: (888) 401-6367 x703 Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 (C) 615-596-4148

with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

NYLE FIREWOOD Item ID 13644.

Sam x702DRY KILN Item ID: 3588

FIREWOOD PROCESSORS

Contact: AUSTIN 2010 Shop Built Wood Processor

Email: Austin@lumbermensco.com - ItPhone: has a 353 Detroit diesel, 40 888-401-6367 EXT 703 931-797-8029 inch insert(C) tooth circle saw, 30 foot

 Issue 364 441

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703 13′ WOODMIZER LT-3000

SUPER HD SAWMILL Item ID: 7010

2015 WOODMIZER LT-70

13428 Victory Ln. // PO Box 124 BAND SAWMILL Adams Center, Item ID: 7545NY 13606 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘13 KMC 2500 Track Skidder GO FAST RUN AROUND Item ID: 14078 SYSTEM Contact: Austin Item ID: 1200 Ph: (888) 401-6367 x703

2005 WOODMIZER LT-40 HD

M I S C E L L A N E O U S

‘93 Barko 180B

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 MACK TRUCK WITH HOOD LOADER

chain conveyer, 8 way splitter, on Item ID: 1089 20,000lb goose neck trailer. Item ID Contact: SAM

13916. x703 Email:Austin Sam@lumbermensco.com Phone: 888-401-6367 EXTSplitter 702 Best Value Portable Log (C) 615-596-4148

- Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

WINCH FOR SALE

One owner and comes with all Item ID: 5413 manuals and receipts. Purchased Contact: AUSTIN

new forAustin@lumbermensco.com $32,500. Item ID 13865.

Email: Phone: 888-401-6367 EXT 703 Sam x702 (C) 931-797-8029

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

WARRATAH FS20a 10’ homemade processor with Item ID: 2100 log deck. Has a hydraulic grapple, Contact: JOE chain and kicker that all runs off

Email: Joe@lumbermensco.com ofPhone: a 4 cylinder Mercedes 888-401-6367 EXTpower 709 801-362-2170 unit. Has(C) a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

INTERNATIONAL 2004 98′ Bandit Beast Model 4680 LOG TRUCK 3412 Caterpillar Diesel engine Item ID: 5057 with 850 HP. 5300 hrs.

Mill in

Contact: AUSTINJust finished 10 good condition.

Email: Austin@lumbermensco.com Acre clearing job, ready work!

Phone: 888-401-6367 EXTto 703 931-797-8029 Remote (C) control.

Big production

 List  seLL  exchange  buy  save

OPERATION

capacity!.Item ItemID: ID5007 13421. Sam x702

BARKO

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in

EDMISTON 6HEAD

kohing head. head works great.

BLOCK SAW

Item ID 13185. Sam x702 Item ID: 5342 1999 Barko 160D - new engine with

Contact: AUSTIN approximately 1500 hours. Hour Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 meter dont work. The last 2 owners (C) 931-797-8029

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

LOG MAX 7000 Item ID: 1051 BELL

Contact: 1990 BellAUSTIN Super T - This Bell has

Email: Austin@lumbermensco.com

aPhone: brand888-401-6367 new Duetz engine.

EXT 703Lever

931-797-8029 control,(C) 33” bar, pump and tranny

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 37

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

AD DIRECTORY

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 441

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

Air Systems Mfg. ...........................16 ............................... 828-757-3500 Anson ...............................................13 ............................... 800-663-7723 B & B Mfg. ......................................17 ............................... 716-373-5881 B. H. Payne .....................................18 ............................... 800-752-0627 ‘93 Barko 180B Buck (AIM) .................18 800-803-3365 ‘16 Equipment Halverson H140 ...............................

Item ID: 14077 Cord King ........................................4 ..............................888-219-WOOD Contact: Austin Skidsteer (DEMO) Corley Mfg ......................................15 ...............................

423-698-0284 Ph: (888) 401-6367 x703 Item ID: JW-909632 CW Mill ...........................................8, 10, 39 .................... 800-743-3491 Contact: J Williams DYNA Products .............................7 .................................. 989-823-6200 Ph: (888) 401-6367 x701 F&R Mfg. .........................................16 ............................... 800-355-1250 Go-Fast Manufacturing................19 ............................... 800-854-7439 Great Lakes Mfg. ...........................18 ............................... 877-248-5677 Holtec ..............................................3 ................................... holtecusa.com Hurdle Machine Works Inc .........40 ............................... 901-877-6251 Hurst Boiler. ...................................14 ............................... 877-774-8778 ‘95 John Deere C6 Kilgore Saw Company ..................16 ...............................

888-857-5153 Lignomat .........................................18 ...............................

800-227-2105 Tree Farmer L-M Equipment Company Ltd, ...1 ..................................

800-455-8807 Item ID: 13920 Contact: Austin Lumbermens Sell ..................23 888-401-6367 ‘13 KMCBuy, 2500 Track ...............................

Ph: (888) 401-6367 x703 Lumbermens Wanted ...................37 ...............................

931-797-8029 Skidder Lumbermens Web Store ..............34 ........................ lumbermenco.com Item ID: 14078 Metal Detectors, Inc.....................19 ............................... 541-345-7454 Contact: Austin capacity!. Item ID 13421. Sam x702 Menominee Saw......................

Ph: (888) 401-6367 x703 ......20 ............................... 800-582-0470 BARKO Midwest Sharpening ...................19 ...............................

231-924-5953 1994 Barko 160B -800-243-5438 Electric Multitek North America, LLC .....12 ............................... off onto a conveyor.

This Inc..........14 is a very knuckleboom, 30'607-589-6160 boom, 75hp Northeast Implements, ............................... well builtAutomati processor.on, Item 13820. ............................... motor, Rotobec continuous Pantron Inc.ID............38 800-211-9468 Sam x702 grapple, 5,000 original hours.

Piper’s Saw Shop..................... ......8 ..................................

800-845-6075 Row Electric....................................19 ...............................

800-248-4479 Firewood Processor - This is (excellent condition.). Item ID Ryan's Equipment ..........................10 ............................... a Chomper Model 16 PDA 13238. Chris x700989-427-2829 Smith Machine Worxprocessor ....................11 ............................... automatice firewood 1995 Barko 775 B 205-620-4455 Feller Buncher Smith Sawmill with John DeereService power ..................2 unit with ..................................

- Pumps recently 800-598-6344 redone. 400 hrs TimberWolf Firewood Equip. .....6, 9 .............................

607-307-4029 low hours. Control panel includes on injection pump. always started Tough ....................................17 ...............................

855-579-0538 tach, oilSeats pressure, water temp and good. in good working order. 22in PLEASE PRINT amp gauges.

Cuts logs up to 16”.

2024 kohing head.NOVEMBER head works great.

you to Change your Address One If owner andneed comes with all Item ID 13185.

Sam x702 or

Addand Your Name to our1999 mailing list, manuals receipts.

Purchased Barko 160D - newthen engine with please complete this form and mail to:

new for $32,500. Item ID 13865.

Sam x702

approximately 1500 hours. Hour

Lumbermens™meter Magazine dont work. The last 2 owners 1116 W 7th St., Ste. 297 LOGGING EQUIPMENT have only used it to load trucks or Columbia, TN 38402

Handles logs up to 32”. Uses

BANDIT as a backup as needed. Has a CTR ❑ Please Add ❑ Please Change ❑ grapple Pleasehas Remove 1999 Bandit 1900 Tracked Disc delimber, been rebuilt.

but electronic option is available.

50% or better. 475 hp Cummins Item ID 13694. Sam x702 Company Name*: ________________________________________________________

made the best valued log splitter.

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under at required Boom have minor leaks. *Company nameCarriage and address to cylinders process your change.

Diesel. 7500 Hours. One owner.

94 Barko 275 - Excellent value

Individual Name: _________________________________________________________

Well maintained. Item ID 13294.

with low at hours at 3,500. 5.9

Address:________________________________________________________________

Sam x702

CUMMINS continuous grapple.

_______________________________________________________________________

2004 Bandit Beast Model 4680 -

Runs Great!. Item ID 13740. Sam

City: ___________________________________________________________________ 3412 Caterpillar Diesel engine x702 State: __________________________________________________________________ with 850 HP. 5300 hrs. Mill in BELL Zip:____________________________________________________________________ good condition. Just finished 10 1990 Bell Super T - This Bell has

Acre clearing job, ready to work! a brand new Duetz engine. Lever Phone: _________________________________________________________________

Remote control. Big production control, 33” bar, pump and tranny Email:__________________________________________________________________

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

Boonville, New York www.starwebhosting.net/woodsmen/

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com ®

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

Danckaert Band Resaw - Roughly

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

John Williams (888) 401-6367 ext. 701 j@lumbermens.co CW has been manufacturing top quality electric

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours

and diesel powered grinders for OVER 40 YEARS! THE PAUL BUNYAN SHOW DESIGN DIRECTOR

on the mill, electronic computer Set

HogZilla Model Cat 3406 140KW Genset, 12,400 TCII-1564P

Donna Heninger Fri, 6 Oct - Sun, 8 Oct We believe in SERVICE AFTER THE SALE! CW Mill’s CUSTOMER Cambridge, Ohio EQUIPMENT REPS SUPPORT AND PARTS availability is TOP RATED in the industry!

Sam Wall www.ohioforest.org

(888) 401-6367 ext. 702 sam@lumbermens.co

hours ready to run. Item ID 13434.

Sam x702 Connect With Us!

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

works,1 1/2" or 2" band, 22ft. track

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 39

LUMBERMENS™ MAGAZINE 1116 West 7th Street, Suite 297 Columbia, Tennessee 38401