Lumbermens November 2023 Magazine

F R E E

E Q U I P M E N T

L I S T I N G S

-

P G

6

NOVEMBER 2023 TM

pg.26>>

PRECISION CUT STOCK

FULL PRODUCT LINES FOR PALLET, STAVE, GRADE AND RAIL TIE INDUSTRIES.

GOLDEN EAGLE GANG SAW SYSTEM • • •

Dust Free Lumber Single, Double, or Twin Double Arbors Built-In Planer Sizer

• • •

8” to 25” Bay Widths As Thin as .125 Kerf in Double Arbors Variable Feed Rates

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

BEAT BANDSAW WORK EVERY TIME WITH THE ULTIMATE PORTABLE ‘93 Barko 180B

“Precision Under Pressure”

‘16 Halverson H140 Skidsteer (DEMO)

BLADES LAST FOR YEARS

Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

REDUCES HANDLING LUMBER SIMPLE TO LEARN & OPERATE

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

TAKES ON ANY DIAMETER LOG CUTS LOGS INTO LUMBER FASTER CUTS STRAIGHT LUMBER RELIABLY

‘95 John Deere C6 Tree Farmer

FAST, SAFE, EFFICIENT & ACCURATE PRODUCES VALUABLE BY-PRODUCT CHIPS

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

capacity!. Item ID 13421. Sam x702

BARKO

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

but electronic option is available.

50% or better. 475 hp Cummins

Value! PA. Item ID 12062. Sam x702

MILLING MADE EASY

in excellent condition. Runs great.

Firewood Processor - This is a

Turbosawmill make the world’s premier automated sawmill, Item ID 13644. Sam x702 homemade processor with a 10’ available right across the US.

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

log deck. Has a hydraulic grapple, chain and kicker that all runs off

We utilize proven swing-blade technology to help every of a 4 cylinder Mercedes power customer save time and money, and to always get the best inch insert tooth circle saw, 30 foot unit. Has a 4’ chain saw that kicks cut lumber.

- It has a 353 Detroit diesel, 40

 Issue 364 429

Lumbermens™  since 1986

❘

motor, Rotobec continuous

grapple, 5,000 original hours.

13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners as a backup as needed. Has a CTR

1999 Bandit 1900 Tracked Disc

adjustable to single two way. Great

knuckleboom, 30' boom, 75hp

have only used it to load trucks or

Chipper - Cat Under Carriage at

Has Log Lift. Uses 4-way wedge Diesel. 7500 Hours.

One owner.

MANUAL MILLS AUTOMATED MILLS

day. Item ID 13882. Austin x703

1994 Barko 160B - Electric

(excellent condition.). Item ID

a Chomper Model 16 PDA

Handles logs up to 32”. Uses

13HP Honda motor. Manual start

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

SLABBERS

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

US Dealer – Smith Sawmill Service

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny www.turbosawmill.com

1-800-598-6344 a brand new Duetz engine. Lever

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 3

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

Grapple Assist for crooked logs

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

2019 Cord King Line-up

Email: info@cordking.ca Web: www.cordking.ca ‘13 KMC 2500 Track Skidder

‘95 John Deere C6 Tree Farmer Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

TOLL FREE 1-888-219-WOOD (9663) Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’

a Chomper Model 16 PDA

automatice firewood processor

Item ID: JW-986495 withsplitter John Deere power unit with • Wedge and Contact: J Williams design tolow hours.

Control panel includes suit your Ph: (888) 401-6367 x701

needs tach, oil pressure, water temp and • 24 to 72 ton splitting amp gauges.

Cuts logs up to 16”. capability One owner and comes with all chain conveyer, 8 way splitter, on • trailer.

The splitting 20,000lb goose neck Itemfastest ID manuals and receipts. Purchased cycle time on the 13916. Austin x703 new for $32,500. Item ID 13865. planet. Sam x702 Best Value Portable Log Splitter

Facts to consider:

- Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

1. Pioneered N. America’s first commercialChipper firewood processor in the mid 70’s 13HP Honda motor. Manual start - Cat Under Carriage at Boom cylinders have minor leaks.

drum design. Can easily load 42’

vans and produce 6 - 8 saw loads per but electronic option is available.M2030 50% orand better.M2430 475 hp Cummins 2. 3 Bar models available M1820, day. Item ID 13882. Austin x703

Has Log Lift. Uses 4-way wedge

Diesel. 7500 Hours. One owner.

Brewco Saws - Two Brewco Saws

Value! PA. Item ID 12062. Sam x702

Sam x702

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

3. 7 Slasher Available Model 44, 44HO, 48, 54 & 60low at hours at 3,500. 5.9 EDGERS & GANGS Saw Models adjustable to single two way.

Great 36, Well 40, maintained.

Item ID 13294. with

CUMMINS continuous grapple.

4. The Most productive machine on the planet, proven and guaranteed Firewood Processor - This is a 2004 Bandit Beast Model 4680 Runs Great!. Item ID 13740. Sam

in excellent condition. Runs great.

Item ID 13644. Sam x702

homemade processor with a 10’ 3412 Caterpillar Diesel engine x702 5. Go to our web site for live action video and details www.cordking.ca FIREWOOD PROCESSORS log deck. Has a hydraulic grapple, with 850 HP. 5300 hrs. Mill in BELL 2010 Shop 6.

Built Wood Processor chain andjoystick kicker that all runs off good condition. Just finished 10 1990 Bell Super T - This Bell has Available with single control - It has a 353 Detroit diesel, 40

of a 4 cylinder Mercedes power

Acre clearing job, ready to work!

a brand new Duetz engine. Lever

7. Exclusive lifetime splitter warranty and Remote 1 year bumper to bumper warranty. control. Big production control, 33” bar, pump and tranny unit. Has a 4’ chain saw that kicks

inch insert tooth circle saw, 30 foot  Issue 364 429

Lumbermens™  since 1986

❘

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

PleAse PrINt

Pulleys on Bearing . Parts Book and

belted rollcase to clear slabs and

12846. Sam x702

short pop-up transfer to edger,

where to order included. Item ID

cuts from sawline, log stop and

Zip

❑ Please Remove

loader to drop logs onto carriage,

Precision 58 Chip Pac - Single chute

stop and loader to deal with big

Sam x702

loading system,. Item ID 12764.

heavy duty log turner under log

EST

Trelan Chipper - This is a remote

logs onto carriage and track and

Email

State

www.starwebhosting.net/woodsmen/ frame. Significant new spare parts

chipper that has been totally rebuilt with about 840 hours except for the

to be negotiated separately. Item ID

BANDMILLS & HEADSAWS DealS Month SOUTHWEST FOREST PRODUCTS EXPO Danckaert Band Resaw - Roughly Fri, 25 August Sat, 26 August From ApriL TA B L E O F C O N T E N T S of the

V-12 Caterpillar power unit. New

13198. Sam x702

clutches, disc, bearing, liners and

Manual Four Head Block - Manual

custom chute. 23” in opening and

Four Head Block Mounted on

The Tree that Started it All!

all steel carriage. Husk. Manual Hot Springs, Arkansas www.arkloggers.com

'12 WoodmIzer LT 40

City

❑ Please Change

FOR CLASSIFIEDS Call 888.401.MENS TM CHIPPERS See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at L I S T New S York ELL EXCHANGE BUY SAVE 1986 Boonville, www.LumberMB\ISmagazine.com blades and 1 spare 36" blade),

DEPARTMENTS

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

V-12 Cat with 750-800 hp rating.

10 hours on this machine since it

has been rebuilt, it has a 24foot in

EquipmEnt REpREsEntativEs EST 1986

deck 20 foot out feed deck cAll uS todAy All youR uSed 72ND ANNUAL GREAT LAKES foR feed equiPMent with needS! 44 inch wheels, and all the LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept Sat, 9 Sept bells and whistles, its a production fREE EquipmEnt listings!

Call –

Phone

Address

Individual Name

Company Name*

❑ Please add

Free Equipment Listings ... 6 Escanaba, Michigan machine, with air strain conveyers (888) 401-6367 that go up and down, with airbags, Industry News.............. 22-23 MID-ATLANTIC LOGGING & BIOMASS Morris it includes two sets of Mcdonough Chris Fri, 15 Sept - Sat, 16 Sept EST 1986 PUBLISHER pressure guides. Top Casting wheel Selma, North Carolina (888) 401-6367 Safety Alert ....................... 24 www.midatlantic-logging-biomass­ is supported on both sides. This Ext. 700 ADVERTISING SALES expo.com/ Ext. 704 is an extremely accurate machine Deals of the Month ........... 26 KENTUCKY WOOD EXPO in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

15 Sept - Sat, 16 Sept Ad Directory ..................... 38 Fri,Lexington, MARKETING DIRECTOR Item ID 13876. Austin x703 Kentucky Woods Publishing

LIST

LIST

SELL

EXCHANGE

item id: 14061 contact: Austin x703

BUY

*Company name and address required to process your change.

If you need to Change your Address or Add Your Name to our mailing list, then please complete this form and mail to:

Lumbermens Magazine

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

(888) 401-6367

P.O. Box 1916 Columbia, TN 38402

✁

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

chris@lumbermensco.com

morris@lumbermensco.com

Reduced PRice item id:14021 contact: Sam x702

FAbTeK 344b

chris Woods Phone: (888) 401-6367 ext. 700 chris@lumbermens.co

http://www.kfia.org/ Sam KentuckyWoodExpo.aspx (888) 401-6367

Morris Woods, Ad Sales Phone: (888) 401-6367 ext. 704 morris@lumbermens.co

Austin S & W 125 Band Mill with

(888) 401-6367 Caterpillar generator - Low hours

Ext. 702 THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct sam@lumbermensco.com item id: 14061 contact: J Williams x701

For classifieds Call toDay (888) 401-6367 ❘

Walker

(888) 401-6367 Ext. 707 ❘

walker@lumbermensco.com

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Bell's Machining ..................... 27 Brute Force Mfg. ..................... 31

Buck Equipment (AIM) ........ 36 Send address changes to: SUBSCRIPTION: Lumbermens™, a trade newspaper for the logging, Lumberman's Exchange Mfgwood .............................. sawmilling, manufacturing, andCorley secondary manufacturing32 P.O.pallet Box 1916 industry, is freeTN within the United States to qualifying manufacturers Columbia, 38402 CRD Metalworks ....................

25 and industry suppliers. Please limit your subscription to one free copy per company orExchange mill locatiison.

The Lumberman's CW Mill-ArmorHog .............. 17

published monthly

by Woods Send address changes to Lumbermens™ CHANGE OF ADDRESS: CW Mill-Hogzilla ................... 15 Publishing, Box 1916, Magazine,P.O. 1116 W. 7th St., Ste. 297, Columbia, TN 38401. When Columbia, TN 38402. All rights possible, please include an old addressDyna label. Products ........................ 35 reserved. All editorial/ advertorial REPRODUCTION AND Adverti sers are................... responsible 8 submissions are used at the RESPONSIBILITY: Empire Hydraulics discretion of the publisher and may for the contents and claims of their advertising. Lumbermens™ accepts beno edited for purposes of their clarityclaims. No Great Lakes Mfg. .................... responsibility for part of this publicati on may be34 and space. Although all efforts reproduced or transmitt edhave in any form or by any means, electronic Hahn Machinery ...................... been to ensure accuracy photocopying, of or made mechanical, including recording or any information 3 content submitted by advertisers storage retrieval system, without Hurst permission of Lumbermens™.14 Boiler ............................. and writers, the Lumberman's Negatives, artwork, and other items submitted for publication in Exchange, its principles and IronserQs. Bull ...................................

Lumbermens™ are the property of adverti Lumbermens ™ owns21 associates, are not held liable for material typeset and/or designed by Lumbermens ™ and reserves the errors or omissions. Reproduction, Kilgore Saw ............................. 22 use outside ofwith­ Lumbermens™. Lumbermens™ will exercise in right wholeto orits part, is prohibited precauti on in writing, designing,Lignomat and printi................................. ng material contained 24 outevery written consent. within. We shallWoods not bePublishing liable for omissions or typographical errors. ©2017

- USED FORESTRY EQUIPMENT FOR SALE

❘

works,1 1/2" or 2" band, 22ft. track austin@lumbermensco.com Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434.

Austin Woods Phone: (888) 401-6367 ext. 703 austin@lumbermens.co

 liSt  Sell  exchange  buY  Save

Baker ...................................... 5, 7

on the703 mill, electronic computer Set Ext.

Cambridge, Ohio www.ohioforest.org

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703  austin@lumbermens.co Issue 364 lumbermenS  Since 1986

MAILING ADDRESS

SAVE

LOGGING & BIOMASS EXPO

Donna Heninger

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

BUY

AD Sales

2012 JoHn deere 548G3

DESIGN DIRECTOR EQUIPMENT REPS

EXCHANGE

SAVE

MID-ATLANTIC

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

SELL

Sam x702 Joe

Sam Wall Phone: (888) 401-6367 ext. 702 sam@lumbermens.co

CARRIAGES & DRIVES

(888) 401-6367 2010 Cardinal HD Carriage Ext. 709 Carriages lumbermenSmagazine.com (Sawmill) - Cardinal joe@lumbermensco.com

Carriage line it includes carriage

with onboard log turners, carriage

drive, hyd pac for carriage, Julie Menominee Saw .....................

29 sawyers cab, computer controls, 401-6367 cabinet with electronic drives for Metal Detector's Inc(888) . ..............

30

Ext. 701 Midwest Sharpening.............. 26

carriage knees, husk including

julie@lumbermensco.com 48" bottom saw and 36" top saw

Morbark ..................................... 9

STACKING The Tree that RACit All! Started

Multitek ................................... 12

Piper's Saw Shop.................... 13

Rotochopper............................ 40

Row Electric ............................ 20

Sawmill Exchange .................. 11 Since 1986, Lumbermens™ has pub lished a month ly circular Select Sawmill ......................... 19 reaching sawmills, loggers, pallet makers, recyclers and industrial woodSawmill working........................... plants worldwide.

Smith 4 PUBLISHER The Paul Bunyan Show ......... 39

AD SUBMISSIONS May be sent to— morris@lumbermensco.com

Woods Publishing

Thomas Industrial Controls..... 10 DESIGN DIRECTOR

Union Grove Saw & Knife.. 2, 37 Ted Monnin Universal Refiner ................... 23

MAILING ADDRESS 1116 W. 7th St., Ste. 297 • Columbia, TN 38401 WoodMizer ................................ l (888) 401-6367

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

POSTMASTER Send address changes to: Lumbermens™ Magazine 1116 www.BakerProducts.net W. 7th St., Ste. 297 • Columbia, TN 38401

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 5

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO)

CABLE SKIDDERS

1997 TIMBERJACK 240C 1997 Timberjack 240C with powershift transmission, hard to find skidder that still has low hours on it, only around 6500 original hours. Has gearmatic winch, good pins and bushings, and no bad leaks anywhere.

Call for more info.

Item ID 100096. Austin x703

79' TIMBERJACK 225D 79’ Timberjack 225d Has new 4BT Cummins engine with 1000 hours on it. New brakes New tires on back New parking brake Tight center section Really tight skidder for the age.

Also Comes with another set of 23.1 tires and a brand new set of chains.

Item ID 100087. Austin x703

97' TIMBERJACK 240C JOHN DEERE 440C'S 1997 Timberjack 240C has PACKAGE DEAL freshly rebuilt 4BT cummins Up 13428 for saleVictory are two John Deere Ln. // PO Box 124 440C Cable one13606 is in engine with 50 hours on it, Adamsskidders, Center, NY great shape, winch just totally as well as rebuilt 4 speed rebuilt and and working daily. new process transmission.

The other has the transmission Comes with 23.1 tires at out of it, the trans has been around 50%. Call for more rebuilt, but has not been put info.

Item ID 100076. Austin x703 back in the skidder. Call for more info.

84' JOHN DEERE 440C Item ID 100094. Austin x703 1984 John Deere 440C has ‘05 Gehl CTLengine, 70 tight freshly rebuilt 2014 JOHN DEERE 640H pins and bushings, as well as Item ID: JW-986495 2014 Model John Deere all new hoses.

No leaks, woods Contact: J Williams 640H cable skidder with ready skidder.

Call for more Ph: (888) 401-6367 x701 1300John original hours, skidder ‘83 Deere info. is in mint condition, its a one Item ID 100075. Austin x703 4850 owner machine, excellent

rubber, tight, and clean Item ID: 14073 as a whistle.

Call for more Contact: Austin information.

Ph: (888) 401-6367 x703 Item ID 100091. Austin x703

chain conveyer, 8 way splitter, on

with 1700 hours, in very good

- Small manufacturer in PA has

condition. Easily produces high

84' goose JOHNneck DEERE 540B 20,000lb trailer.

Item ID

1984 Austin John x703 Deere 540B just 13916.

had the winch completely rebuilt, no motor or trans work

Best Value Portable Log Splitter

made the best valued log splitter.

Tough Meets QUALITY

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 429

Handles logs up to 32”. Uses

13HP Honda motor. Manual start but electronic option is available.

Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off

sales@toughseats.com of a 4 cylinder Mercedes power toughseats.com

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Item ID: JW-909632 Contact: J Williams recently, both are strong Ph: (888)but 401-6367 x701 and don't bur any oil. Call for more info.

Item ID 100074. Austin x703 97' JOHN DEERE 640G 1997 model John Deere 640G, pulling wood daily, has new rearend, new center section, and new hydraulic pump in it. Motors been done couple years call 2500 for moreTrack info.

‘13 ago, KMC Item ID 100070. Austin x703

Skidder

Item ID: CAT14078 518 CABLE Contact: Early 90'sAustin Cat 518 cable Ph: (888)has 401-6367 x703 and skidder, cat winch, cat motor in it in good shape.

Tight center section, no leaks off onto a conveyor.

Thisdecals is a veryif on it. Comes with interested.

Serial Item number is well built processor.

ID 13820.

94U model. Tires are size 34.5.

Sam x702 Woods ready.

Firewood Processor - This is Item ID 33681. Austin x703 a Chomper Model 16 PDA DOZERS WITH WINCHES automatice firewood processor

JOHN DEERE 750K with John Deere power unit with 2014 model John Deere 750K low hours.has Control panel includes currently 3700 hours on it, tach, oil pressure, water temp and equipped with winch, screens, limb risers. Cuts Undercarriage amp gauges. logs up to 16”.is 60%, welland maintained, clean One owner comes with all cab, good heat/ac. Call for manuals and receipts. Purchased more info. new Item ID 13865.

Itemfor ID$32,500.

100053.

Austi n x703 Sam x702

LOGGING EQUIPMENT BANDIT

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703 JOHN DEERE 750J 2011 John Deere 750J has 4200 original hours, enclosed cab with heat/air, strong winch.

Undercarriage is around 80%.

Working until sold.

Item ID 100015. Austin x703

‘95JOHN John Deere C6 DEERE 650H Tree Farmer 2003 John Deere 650H has

around 8000 frame hours, Item ID: 13920 Undercarriage is around 60%, Contact: Austin has full forestry package with Ph: (888) 401-6367 x703 winch. Dozer was never logged with until this past year.

Item ID 99876. Austin x703 capacity!. Item ID 13421. Sam x702

BARKO650G JOHN DEERE 1994 model Barko 160B - Electric 90's John Deere 650G knuckleboom, 30'forestry boom, 75hp Long Track Full Dozer with is motor,winch.

Rotobecundercarriage continuous at about 80%. Call for more grapple, 5,000 original hours. information (excellent condition.). Item ID Item ID 99852. Austin x703 13238. Chris x700 DYNAMIC CHIPPERS 1995 Barko 775 B Feller Buncher

PRECISION HUSKY CHIPPER - Pumps recently redone. 400 hrs They put it to work, bought on injection pump. started brand new in 2013always -66 inch -8 good.-Bott in good order.

22in knife omworking discharge -Extra parts withworks it great. (worth kohingcome head. head about $5,000) -Owner Item ID 13185. Sam x702 is done with project and so selling it 1999 Barko 160D - new engine with -Machine is as good as new, approximately 1500on hours. everything works it. Hour meter work. TheJoe lastx709 2 owners Itemdont ID 100116. have only used it to load trucks or

as a backup as needed. Has a CTR

Direct Bolt-In Seats Makes/Models 1999 Bandit 1900 Tracked Discfor Most delimber, grapple has been rebuilt.

Chipper - Cat Under Carriage at

Boom cylinders have minor leaks.

Diesel. 7500 Hours. One owner.

94 Barko 275 - Excellent value

50% or better. 475 hp Cummins

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine

Item ID 13694. Sam x702

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

“WE KNOW SO YOU DON’T HAVE with 850 HP. 5300SEATS hrs. Mill in BELL TO!” good condition. Just finished 10 TOLL Acre clearing job, ready to work!

FREE Remote control. Big production

1990 Bell Super T - This Bell has

855-579-0538

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 7

Phone 315.284.4126 BANDIT GRINDER - CHIPPER Faxit is ready to work! If sold they 315.849.2045 can transport anywhere in PRICE REDUCED $165,000 Website This is a 2017 Bandit www.empirehyd.com 3680 Florida or to the FL state line 875 hp CAT bought it newEmailto reduce transportation cost “Precision Under Pressure” info@empirehyd.com

10-17 it has 1000hrs+\- Still running it some. It has the new design 30 tooth mill and also had a new tail shaft and new anvil and gate. Also has a set of 3” baffled screens for it that only have about 30hrs on them. This is a strong tier 2 machine owner operated they are selling because they upgraded to a 1200hp machine, there is nothing wrong with this machine and

for the buyer. You won’t find a grinder in this good of shape anywhere.

Item ID 72593. Austin x703 FELLER BUNCHERS

08' JD 843J ($49.5K) 4 Brand new tires, 28L’s -Enclosed CAB -Center section is tight, too -A/C - Heat works no problem -2yrs owner, getting out of logging, going a different route -Cutter is ready

to go to work, tight machine -Everything works as it should, really, really good cutter Item ID 100122. Joe x709 13' JOHN DEERE 643K 2013 John Deere 643K with ‘16 Halverson 6300 original hours, H140 joystick control.

Cab has(DEMO) heat/air, tires Skidsteer have tread at 30.5 size.

Itemgood ID: JW-909632 Cutt er is in excellent Contact: J Williamsshape, well maintained.

Call for more info.

Ph: (888) 401-6367 x701 Item ID 100115. Austin x703 07' TIMBCO 445EXL 2007 Timbco 445 Exl with 8000 original hours, cutter

off onto a conveyor. This is a very

96' CAT 312 TRACK BUNCHER 1996’ Cat 312 Feller Buncher ‘95 John Deere C6 with Timbco head.

Buncher has 8000 original hours with no oil Tree Farmer leaks.

Tracks are good, head Item ID: 13920 was re-bearinged, Contact: Austin with new bushings.

95% on one Ph: (888)Rails 401-6367 x703 side, 40% on the other. Brand new AC unit and has good heat. Complete service was just capacity!. Item 13421.

SamAlso x702 completed 20 ID hours ago.

BARKO Comes with 24” bucket. Call for more info. 160B - Electric 1994 Barko Item ID 100088.

Austin75hp x703 knuckleboom, 30' boom,

Sam x702

grapple, 5,000 original hours.

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

well built processor. Item ID 13820.

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 429

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

has new chains, and sprockets.

UC is around 80%. Barsaw Head will rotate 45 degrees, but is plumbed for 360 degree rotation. Cutter is in great shape and is woods ready. Call Barko 180B for‘93 more info Item 14077Austin x703 Item IDID: 100104.

Contact: Austin Ph:15' (888) 401-6367 x703 TIGERCAT 724G 2015 Tigercat 724G has 8500 original hours, has the big hardwood head on it, cutter has been well maintained and is turn key ready. Call for more info.

Item ID 100101. Austin x703

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

BUY NOW &

10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

it includes two sets of Mcdonough

SAVE BIG PUBLISHER

Woods Publishing

MID-ATLANTIC

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

LOGGING & BIOMASS EXPO

ON TAXES.

MARKETING DIRECTOR John Williams (888) 401-6367 ext. 701 j@lumbermens.co

DESIGN DIRECTOR Donna Heninger

New trailers

Used trailers

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

LOWBOYS

POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

works,1 1/2" or 2" band, 22ft. track

Rental trailers

In-house financing Cat 3406 140KW Genset, 12,400

Cambridge, Ohio www.ohioforest.org

hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

LIVE FLOORS Brute Force Mfg . ..................... 31

LOG TRAILERS Midwest Sharpening .............. 26

carriage knees, husk including CHIP TRAILERS

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

DOUBLE DROPS

FLATBEDS

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

OPEN TOP CHIP

The Lumberman's Exchange is CW Mill-ArmorHog .............. 17 Rotochopper............................ 40 published monthly by Woods CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 Publishing, P.O. Box 1916, Columbia, TN 38402. All rights Products ........................

35 when Sawmill ..................

11 before the end of the year.

TakeAlladvantage of the hugeDyna tax savings you could get youExchange purchase a trailer reserved. editorial/ advertorial submissions are used at the Empire Hydraulics ................... 8 Select Sawmill ......................... 19 discretion of the publisher and may be edited for purposes of clarity Great Lakes Mfg. .................... 34 Smith Sawmill ........................... 4 and space. Although all efforts have Hahn Machinery ...................... 3 The Paul Bunyan Show ......... 39 been made to ensure accuracy of content submitted by advertisers Hurst Boiler ............................. 14 Thomas Industrial Controls..... 10 and writers, the Lumberman's Exchange, its principles and Iron Bull ................................... 21 Union Grove Saw & Knife.. 2, 37 associates, are not held liable for errors or omissions. Reproduction, Kilgore Saw ............................. 22 Universal Refiner ................... 23 in whole or part, is prohibited with­ LYNCHBURG, VA SPARTANBURG, SC WILMINGTON, NC CHARLESTON, SC www.BakerProducts.net Lignomat ................................. 24 WoodMizer ................................ l out written consent.

800.S48.6914 I S73.663.7711 ©2017 Woods Publishing

Call Today, Pick Up Tomorrow (800) 513-9373 | PinnacleTrailers.com

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

❘

 (888) 401-MENS L!

NO. 9

Phone 315.284.4126 Faxreplaced, the other side one '05 JD 643H ($29.5K) 315.849.2045 Hours Meter Reading: 8324 final drive is a little weak, Website -John Deere bunching www.empirehyd.com head still running fine but starting -Tires size:Under 28L-26 Tires -A/CEmailto show some wear. Overall “Precision Pressure” info@empirehyd.com

- heat both work good -Center section is tight -Pins & bushings are good -It has a new saw disk -Kept really, really well. Good cutter.

Item ID 100072. Joe x709 TIMBCO 425C 2003 Timbco 425C has around 10900 frame hours, new teeth for the head, 8.3 cummins motor, one side final drive has been

buncher is in good shape.

Call for more info.

Item ID 100028. Austin x703

CAT 563C 2016 Cat 563C Has right around 6400 frame hours Joystick control New style bunching head In great shape everything works like it should.

Item ID 99970. Austin x703

445B 98’ Timbco 445B auto leveling, new undercarriage, has hot saw head, and new 8.3 cummins engine in it. Head is in good shape, no cracks in the disc, and new teeth.

‘16 ItemHalverson ID 99934. AustiH140 n x703

Skidsteer (DEMO)

DEERE 753J ItemJOHN ID: JW-909632 2014 John Deere 753j Contact: J Williams buncher well maintained.

Ph: (888) 401-6367 x701 10,826hrs great shape undercarriage at 50% Main boom and stick boom have been updated with strengthening plates 1,000hrs

off onto a conveyor. This is a very Sam x702

grapple, 5,000 original hours.

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

well built processor. Item ID 13820.

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 429

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

14' TIGERCAT 720E ‘93Tigercat Barko 180B 2014 720E has 10000 Itemhours, ID: 14077 frame and new reman Contact: motor with Austin 150 hours on it, Ph: receipts.

(888) 401-6367 with Cutter x703 is tight, dry, and a clean machine inside and out. Also has new style joysticks and new saw pump.

Needs nothing to get in the woods.

Item ID 99916. Austin x703 JOHN DEERE 643K 2012 John Deere 643K with ‘95 John Deere 6500 hours just had C6 new cutti ng edge installed.

Tree Farmer This cutt er has been garage kept Item ID: 13920 half of its life and is very clean Contact: Austin inside and 401-6367 out, meticulously Ph: (888) x703 maintained with absolutely no issues. Comes with brand new 43" wide tires for front axle, capacity!.

ID 28L 13421.

Samwith x702 along withItem good tires BARKO original rims. Call for more pics and 1994info.

Barko 160B - Electric Item ID 99905.

Austin75hp x703 knuckleboom, 30' boom,

‘13 KMC 2500 Track Skidder 13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

ago. New Stickboom cylinder.

Heads is in good shape.

Everything is tight and dry.

Item ID 99917. Austin x703

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Public Online Auction Fri, 18 August - Sun, 20 August Edman Company Boonville, New York

www.starwebhosting.net/woodsmen/ Whole Log Chipping Facility & Rolling Stock BANDMILLS & HEADSAWS SOUTHWEST FOREST PRODUCTS EXPO Start Date: 10AM | November 8 End Date: 10AM | November 15 Danckaert Band Resaw - Roughly Fri, 25 August - Sat, 26 August The Tree 10 hours on this machine since it Hot Springs, Arkansas 14 Preview: 8AM to 4PM | November that Started www.arkloggers.com has been rebuilt, it has a 24foot in it All! Location: 2502 Marine View Drive, Tacoma, WA 98422

PUBLISHER

Woods Publishing

2000 JOHN DEERE ADVERTISING SALES744H

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

2008 LINK-BELT 240LX

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

6,749 MILES

works,1 1/2" or 2" band, 22ft. track

2019 JOHN DEERE 844L Cat 3406 140KW Genset, 12,400

Cambridge, Ohio www.ohioforest.org

hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

POSTMASTER

pressure guides. Top Casting wheel

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

Donna Heninger

May be sent to­ morris@lumbermens.co

it includes two sets of Mcdonough

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

2007 LINK-BELT 240LX EQUIPMENT REPS

AD SUBMISSIONS

that go up and down, with airbags,

Selma, North Carolina www.midatlantic-logging-biomass­ 1996 WAGNER LUMBER MID-ATLANTIC expo.com/ LOGGING & BIOMASS EXPO JACK LOG STACKER L80F

DESIGN DIRECTOR

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367 2016 GENIE GTH5519

bells and whistles, its a production machine, with air strain conveyers

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

MAILING ADDRESS

with 44 inch wheels, and all the

Escanaba, Michigan

MARKETING DIRECTOR

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

feed deck 20 foot out feed deck

72ND ANNUAL GREAT LAKES LOGGING4,005 & HEAVY EQUIPMENT EXPO HRS Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. 2010 Payne .............................. 16 INTERNATIONAL DURA STAR Baker ...................................... 5, 7

Meadows Mill, Inc. ................ 33 200-TON LOG SPLITTER Menominee Saw ..................... 29

with onboard log turners, carriage 2023 INC drive,MOTORTRONICS hyd pac for carriage, MVC4-41200-ESWG 4 SERIES sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is CW Mill-ArmorHog .............. 17 published monthly by Woods CW Mill-Hogzilla ................... 15 Publishing, P.O. Box 1916, Columbia, TN 38402. All rights Dyna Products ........................ 35 reserved. All editorial/ advertorial submissions are used at the Empire Hydraulics ................... 8 discretion of the publisher and may be edited for purposes of clarity Great Lakes Mfg. .................... 34 and space. Although all efforts have Hahn Machinery ...................... 3 been made to ensure accuracy of content submitted by advertisers Hurst Boiler ............................. 14 and writers, the Lumberman's Exchange, its principles and Iron Bull ................................... 21 associates, are not held liable for RH 6-ARM DEBARKER errors or omissions. Reproduction, Kilgore Saw ............................. 22 in whole or part, is prohibited with­ Lignomat ................................. 24 out written consent. ©2017 Woods Publishing

Rotochopper............................ 40

NICHOLSON #27 A5A

48" bottom saw and 36" top saw

STACKING RAC

2009 CATERPILLAR 519

KIMWOOD

Row Electric ............................ 20 Sawmill Exchange .................. 11 Select Sawmill ......................... 19 Smith Sawmill ........................... 4 The Paul Bunyan Show ......... 39 Thomas Industrial Controls..... 10 Union Grove Saw & Knife.. 2, 37

2008 MORBARK

PEERLESS

Universal Refiner ................... 23

www.BakerProducts.net WoodMizer ................................ l James G. Murphy Co. - Murphyauction.com For More Info - 425.486.1246 800.S48.6914 I S73.663.7711

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

❘

 (888) 401-MENS L!

NO. 11

Phone 315.284.4126 Fax JOHN DEEERE 643G JOHN DEERE 753J 315.849.2045 1996 model John Deere 643G 2013 John Deere 753J Feller Website feller buncher its a one owner Buncher with a FR21B Felling www.empirehyd.com Head.

It has 8500 hours, runsEmailmachine, has good hydraulics, “Precision Under Pressure” info@empirehyd.com

and starts good, resealed gear box, strong hydraulics and drive, new saw pump. Boom has tight pins and bushings, Bigfoot undercarriage will need to be replaced soon, and will also need a new saw disc soon.

It has 24" single grouser pads. grab arms are in good working order. Heat, air conditioning, & lights all work.

Item ID 99902. Austin x703

it starts, runs, and cuts as it should. Call for more info.

Item ID 99897. Austin x703

JOHN DEERE 643K 2013 model John Deere 643K currently has 8600 hours on it, buncher is tight and dry, with no leaks or blow by. Averaging 30-40 loads a week. Call for more info.

Item ID 99866. Austin x703

JOHN DEERE 843J 2008 model John Deere 843J machine is tight, dry, and works perfect, running everyday, size 28L tires. Cab has heat/ ac. Frame hours are right at 10,000.

Item ID 99879. Austin x703

1997 T has new Deutz ItemBell ID:Ultra JW-909632 engine in it with 15 hours on it.

Contact: J Williams Tracks and undercarriage are in Ph: (888) 401-6367 x701 excellent condition. Cab has AC and joystick control. Woods ready.

Video available if interested Item ID 99865. Austin x703

‘16 Halverson H140 BELL ULTRA T Skidsteer (DEMO)

Trusted National Leader

Biomass Boiler System

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

OUR PRODUCTS • Combustion Systems - Dry Fuel System - Green Fuel System

‘83• John Deere Material Handling • Controls 4850

Item ID: 14073 Equipment • Emissions Contact: Austin • Repalcement Parts Ph: (888) 401-6367 x703 • Wood Fired Forced Air Systems with 1700 hours, in very good • Automated Outdoor condition.

Easily produces high

Wood Boiler quality chips with patented ‘Cone’ Custom drum •design.

CanFabrication easily load 42’ vans and produce 6 - 8 loads per

OUR SERVICES

day. Item ID 13882. Austin x703

EDGERS & GANGS • Engineering Design

Brewco Saws - Two Brewco Saws

• Fabrication

in excellent condition. Runs great.

• Installation

Item ID 13644. Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with Design, Fabrication low hours. Control panel includes tach, oil pressure, water temp and & Installation

chain conveyer, 8 way splitter, on

amp gauges. Cuts logs up to 16”.

One owner and comes with all

national inreceipts. the Purchased 20,000lb gooseAs neckatrailer.

Item ID leader manuals and 13916. Austin x703

new for $32,500. Item ID 13865. biomass boiler system industry,

Best Value Portable Log Splitter

Sam x702

Messersmith Manufacturing, Inc. LOGGING EQUIPMENT

- Small manufacturer in PA has

made the best provided valued log splitter.

BANDIT has cost saving solutions Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

Has Log Lift. Uses 4-way wedge

Diesel. 7500 Hours. One owner.

Value! PA. Item ID 12062. Sam x702

Sam x702

to customers in all industrial sectors Chipper - Cat Under Carriage at for isover thirty50% five years. but electronic option available. or better.

475 hp Cummins 13HP Honda motor. Manual start

adjustable to single two way. Great Firewood Processor - This is a

homemade processor with a 10’

• Start Up/Commissioning FIREWOOD PROCESSORS log deck. Has a hydraulic grapple,

Well maintained. Item ID 13294.

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

2010 Shop Built Wood Processor • Operator Training

chain and 2 6 1kicker 2 F that R oallaruns d •offB a r kgood R i condition. v e r , M Just I 4finished 9 8 0 7 10

inch insert tooth circle saw, 30 foot & Services

unit. Has a 4’ chain saw that kicks

- It has• aOngoing 353 Detroit diesel, 40 Parts

 Issue 364 429

906-466-9010

of a 4 cylinder Mercedes power

Lumbermens™  since 1986

❘

Acre clearing job, ready to work!

Remote control. Big production

 List  seLL  exchange  buy  save

HYDRO AX 721E 2004 Hydro ax 721 E is in excellent condition, it has only had two owner/operators its entire life. It has a 8.3 cummins engine, and the machine itself ‘93 Barko 180Bframe has around 6000 original ItemNew ID: 14077 hours. upgrades include a Contact: Austin new windshield, new batteries, Ph:new (888)blades 401-6367 x703 on and and teeth the mowing deck. There are no leaks, and all of the pins and bushings are very tight. Unit Includes a bunching head and mower deck. The tires are size 28L and are basically new. And it includes a set of chains for the front tires. Machine is really in excellent shape all around and ‘95 John C6 is 100% ready toDeere go to work.

Item ID 99826.

Austi n x703 Tree Farmer

Item ID: 13920 573 Contact:CAT Austin 2006 which is the first Ph: model (888) 401-6367 x703 year Hydro ax bought Cat so technically it is a Hydro ax cutter with Cat decals, but it capacity!.

IDon 13421.

Samisx702 has 8700 Item hours it, and in BARKO real good shape. Woods ready.

ItemBarko ID 59580.

Austin x703 1994 160B - Electric knuckleboom, 30' boom, 75hp

JOHN DEERE 848L motor, Rotobec continuous 2015 model with 3600 grapple, originalconditi hours. on. hours in5,000 excellent (excellent Item IDand Call for condition.). more pictures informati on.x700 13238. Chris ItemBarko ID 83128.

AustiBuncher n x703 1995 775 B Feller - Pumps recently redone. 400 hrs

HYDRO AX 411 on injection always started 411 Hydro pump. ax comes with log good. ainmorbark good working forks, sheer,order. and a22in 8 foot mower deck.

Allworks is workgreat. ready. kohing head. head ItemIDID13185.

98954.

Item SamAusti x702n x703

1999 Barko 160D - new engine with

TIMBCO 425D approximately 1500 hours. Hour 1995 Timbco 425D has meter dont work. frame The last hours.

2 owners around 10000 Head is used a it quadco 22" have only to load trucks or hotsaw, 40as degree lt, UC % as a backup needed.tiHas a CTR isdelimber, aroundgrapple 80. has new rails, has been rebuilt. rollers, and sprockets, Hardly Boom cylinders have minor leaks. any leaks around pump Item ID 13694.

Sam x702 system, ac just recharged. working daily.

Call for more 94 Barko 275 - Excellent value pics and info. with low at hours at 3,500. 5.9 Item ID 98053. Austin x703 CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam

CAT 563C x702 2016 Cat 563C wheeled buncher withBELL 2010 original hours, 28L res,hasin 1990 Bellsize Super T - ThistiBell excellent conditi on inside and a brand new Duetz engine. Lever out. control, 33” bar, pump and tranny Item ID 2594. Austin x703 ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 13

Phone 315.284.4126 Faxbunk. Heat/air, and good FORWARDERS 315.849.2045 23.1 tires on it. Call for more Website TIMBERJACK 610 info. www.empirehyd.com 2000 model 610 Timberjack EmailItem ID 100093. Austin x703 “Precision Under forwarder with Pressure” joystick control, info@empirehyd.com

13000 frame hours. Cummins engine, brand new rubber. Has good AC/Heat. Loading logs daily.

Item ID 100095. Austin x703

FRANKLIN 132 1994 model Franklin 132 forwarder with 6500 original hours on it, has cummins engine, clean cab with new glass all around. 12' 8'' log

JOHN DEERE 1010D 2005 John Deere 1010/D Has 14000 frame hours Dry machine, with good pumps.

In the woods working now. It comes with two sets of tires (23inch & 43s) Injector pump (Brand New) Turbo Injectors (Brand New) Ready for the Woods!

Item ID 100022. Austin x703

VALMET 644 2002 Valmet 644 forwarder in excellent condition it has a cummins engine with a powershift transmission, joystick controls, and extenda boom. Recent work includes: ‘16 Halverson new center bearing H140 redone, brand new rack, new main Skidsteer (DEMO) pump, new valve bank, new Item ID: JW-909632 brake pump up by the motor, Contact: J Williams and new clam cylinder.

Has new Ph: (888) 401-6367 x701 23.1 tires on the back. Overall very clean and in great shape.

Item ID 99837. Austin x703

VALMET 840.4 2009 Valmet 840.4 6 wheel forwarder. Sisu 6 cylinder diesel motor. 28L size front tires at 75%, 710/45X26.5 rear tires at 60%. fuel fired diesel heater. CRF8.1 ‘93 Barko 180B Cranab loader, G36 Grapple Item ID: 14077 with protec system. Recent work Contact: Austin includes brand new hydro stats, Ph: (888) 401-6367 x703and along with new drive motor new injection pump. Running gears have been gone through from one end to the other. Not a leak on this machine. Also had new fuel pump installed.

Item ID 79249. Austin x703

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 429

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 15

Phone 315.284.4126 Faxcomes with 1 set of ice chains, TIMBERKING 458 315.849.2045 2005 Timberking 458 and 1 set of bear paws, and 1 Website forwarder with 17,750 www.empirehyd.com frame set of tracks. Tires are 600's hours, hadUnder newPressure” engine installedEmailrears are 80% fronts are 40% “Precision info@empirehyd.com

1000 hours ago, new super grip grapple 1000 hours ago as well. Very well maintained and straight machine, working daily.

Item ID 171. Austin x703

VALMET 840.2 FORWARDER 2005 Valmet 8 wheel double bunk forwarder, around 18000 frame hours, has new trunnion, has new rear bogie brakes that were installed last spring. New loader mast put on a year ago,

The

comes with extra hoses, and extra lights.

Item ID 9770. Austin x703 GRAPPLE SKIDDERS

07' JD 748G III ($49.5K) Have videos available -Meter reads 1hr, because it was just replaced, but it showed those hours before install -Tires size: 30.5’s -Tires tread: 80% -Gears shift smoothly -Dual arch -A/C and heat both work -Winch

and grapple work -Engine & transmission rebuilt by John Deere 1yr prior to owner buying it about a year ago.

-Reason for selling: he mostly cuts small tracts and mostly by himself. Too big for what he ‘16 Halverson H140 does -Everything works as it should.

Skidsteer (DEMO) ItemID: ID JW-909632 100127. Joe x709 Item

Contact: J Williams TJ 401-6367 380A ($29.5K) Ph: 83' (888) x701 New winch drive shaft -New injection pump -Bushings replaced in spring 2020 -Tiny slop in the center section -New glass in the cab -Motor

is from a 93’ dodge pick-up truck with low hours installed in summer 2019 -Owner ran it two seasons, then bought a bigger skidder in 2020 -New cylinders for the grapple, -4 ‘93 Barko 180B-Tires speed clark powershift Item ID:x 14077 size: 24.5 32, -Owner will put a Contact: brand newAustin tire on before sale (888) 401-6367 x703 -4Ph: chains come with sale -2yrs owner -Owner went pretty much thru everything, machine is at work everyday right now.

It's ready to go make $$$$ elsewhere.

Item ID 100126. Joe x709

WOOD-PAKER

‘95 John Deere C6 Tree Farmer

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

The Number One Bundling Machine Line for Packaged Firewood Firewood Processor - This is (excellent condition.). Item ID

B & B Manufacturing is in the foothills of athe Allegany range in Olean, New Chomper Model 16Mountain PDA 13238. Chris x700 York. We have been in 1985firewood producing bundling systems ‘05business Gehl CTLsince 70 January automatice processor wood 1995 Barko 775 B Feller Buncher called “THE WOOD-PAKER” for the firewoodwith and waste wood industry.

We have geared Item ID: JW-986495 John Deere power unit with - Pumps recently redone. 400 hrs our machinery to meetContact: the needs of various producers. We offer several different types of J Williams low hours. Control panel includes on injection pump. always started equipment for packaging your401-6367 wood x701 from shrink wrapping, stretch wrapping and bagging.

Ph: (888) tach, oil pressure, water temp and good. in good working order. 22in ‘83However John Deere you wish to BUNDLE we have a system for you.

4850

amp gauges. Cuts logs up to 16”.

kohing head. head works great.

new for $32,500. Item ID 13865.

approximately 1500 hours. Hour

• The WOOD-PAKER: 6- Small models of the HEAT SHRINK oven with 1700 hours, in very good manufacturer in PA has LOGGING EQUIPMENT

have only used it to load trucks or

All these systems provide convenient packaging of waste-wood, One owner and comes with all Item ID 13185. Sam x702 chain conveyer, 8 way splitter, on Item ID: 14073 slabs, 20,000lb edgings and fi rewood for the consumer market. goose neck trailer. Item ID manuals and receipts. Purchased 1999 Barko 160D - new engine with Contact: Austin Ph: (888) 401-6367 x703

13916. Austin x703

THE WOOD-PAKER LINE INCLUDES: Best Value Portable Log Splitter

Sam x702

YOUR ONE-STOP SHOP FOR meter dont work. The last 2 owners BUNDLING SUPPLIES

system. made the best valued log splitter.

BANDIT • The WRAPPER: Single person stretch wrap unit electric and quality chips with patented ‘Cone’ Handles logs up to 32”. Uses 1999 Bandit 1900 Tracked Disc manual available. drum design. Can easily load 42’ 13HP Honda motor. Manual start Chipper - Cat Under Carriage at • The BAGGER: A conveyor system using horizontal mesh vans and produce 6 - 8 loads per but electronic option is available.

50% or better. 475 hp Cummins bags. day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge Diesel. 7500 Hours. One owner.

• The TILT BAGGER: Single person unit using mesh bags.

EDGERS & GANGS adjustable to single two way. Great Well maintained. Item ID 13294. condition. Easily produces high

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

Brewco Saws - Two Brewco Saws

Value! PA. Item ID 12062. Sam x702

Sam x702

Item ID 13644. Sam x702

homemade processor with a 10’

3412 Caterpillar Diesel engine

x702

chain and kicker that all runs off

good condition. Just finished 10

1990 Bell Super T - This Bell has

CUMMINS continuous grapple.

Affordable and Easy to Operate • INCREASE YOUR WOOD PROFITS! Firewood Processor - This is a 2004 Bandit Beast Model 4680 Runs Great!. Item ID 13740. Sam WOOD-PACKAGING has come into its own.

in excellent condition. Runs great.

716-373-5881

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

log deck. Has a hydraulic grapple,

with 850 HP. 5300 hrs. Mill in

BELL

- It has a 353 Detroit B diesel, Acre River clearing job, ready •toOlean, work! a brand new Duetz engine. Lever of a 4 cylinder Mercedes• power &40B Manufacturing 3007 West Road NY 14760

inch insert tooth circle saw, 30 foot Remote control. Big production control, 33” bar, pump and tranny unit.

Has a 4’ chain saw that kicks• www.thewoodpaker.com E-mail: bbmfg@verizon.net  Issue 364 429

Lumbermens™  since 1986

❘

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

CARRIAGES & DRIVES

LINK** Carriages (Sawmill) - Cardinal Field Proven Design forINFO the Independent Hardwood Sawmill MAILING ADDRESS

2010 Cardinal HD Carriage

Carriage line it includes carriage

B & B Mfg . ...............................

18 M&F Gauge ............................. 28- Two proven P.O. Box 1916 • Corley lnfeed and Edger with Lewis Optimization with onboard log turners, carriage Columbia, TN 38402-1916 B. H. Payne .............................. 16 Meadows Mill, Inc. ................ 33 drive, hyd pac for carriage, (888) 401-6367 names with proven results Menominee Saw .....................

29 Baker ......................................

5, 7 sawyers cab, computer controls, AD SUBMISSIONS May be sent to­ cabinet with electronic drives for • True HardwoodBell's Optimization Machining ..................... 27 Metal Detector's Inc. .............. 30 morris@lumbermens.co carriage knees, husk including Brute Force Mfg. ..................... 31 Midwest Sharpening.............. 26 • Small footprint that fits inside most existing mills POSTMASTER 48" bottom saw and 36" top saw Buck Equipment (AIM) ........ 36 Morbark ..................................... 9 Send address changes to: Exchange •Lumberman's Value priced with allMfgof.............................. the optimization capability12 of more Corley 32 Multitek ...................................

P.O. Box 1916 Columbia, TN 38402 CRD Metalworks ....................

25 Piper's Saw Shop.................... 13 elaborate high speed Edger Optimizers

STACKING For more information on our new "M" Series Edger RAC and

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

other Corley and Lewis products, give us a call.

LEWIS CONTROLS CORLEY SAWMILL OPTIMIZATION MACHINERY Chattanooga, Tennessee Iron Bull ................................... 21

Kilgore Saw ............................. 22 Phone 423-698-0284 Lignomat ................................. 24

www.corleymfg.com

- USED FORESTRY EQUIPMENT FOR SALE

❘

Cornelius, Oregon

Union Grove Saw & Knife.. 2, 37

Phone 503-648-9119

Universal Refiner ................... 23

www.BakerProducts.net

WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY l§

www.lewiscontrols.com 800.S48.6914 I S73.663.7711 ❘

 24/7 SUPPORT 0

❘

 (888) 401-MENS L!

NO. 17

Phone 315.284.4126 Fax-Everything works as it 13' CAT 545C ($64.5K) 315.849.2045 should -Owner is not into Tires size: 35.5’s -A/C works Website -It’s got new injectors,www.empirehyd.com too logging anymore -Center SectiPressure” on is goodEmail Item ID 100109. Joe x709 “Precision Under info@empirehyd.com

-Blade is fine -Enclosed cab -Tight machine. Everything works as it should -Reason for selling: owner is a Tigercat fellow. Wanted to try CAT and compare. He’s sticking with Tigercat, this can go.

Item ID 100123. Joe x709

TJ 450 (FOR PARTS OR FIXING) Engine is in good working conditions. Machine cranks up but doesn't move, it just idles.

Grapple works, no winch, good tires tread still. Can be a fixer upper or used for parts Item ID 100112. Joe x709

98' TIMBERJACK 460C 1998 Timberjack 460C grapple and winch skidder, has under 500 hours on a new crate engine, machine starts, runs, and shifts great. Has new lexan glass, all cylinders have been recently repacked, tight center section, the oil cooler leaks a bit, and could be replaced but that is the only repair that it could use. Other than that it is woods ready. Call for more information.

Item ID 100106. Austin x703

14' JOHN DEERE 748H 2014 model John Deere 748H with 13000 original hours, has the sweda axles, with 44'' tires.

2009 CAT 545C ($48K) Meter reads: 12000 +/- One owner/operator skidder, -Center section has no slack that has been well maintained.

13428 new Victory transmission Ln. // PO Box 124 -Brand Call for more info.

Adams Center, NY in 13606 in 2019.

HOLT CAT TX Item ID 100099. Austin x703 installed it -All bearings and selas replaced -All braces 15' CAT 545D and supports replaced 2015 Cat 545D grapple skidder -Machine is good to go. with winch, and 44'' flotation

tires, skidder has 4000 original hours, and all of the components work like they should, good center pins, no bad leaks, heat/ ac works. Working daily. Call for more info.

Item ID 100098. Austin x703

‘16 Halverson H140 CTR 950 Skidsteer (DEMO)

CTR Grapple and winch Item950 ID: JW-909632 skidder has 5.9 cummins Contact: J Williams engine, john deere Ph: (888) 401-6367winch, x701 two sets of diamond double chains.

Rebuilt the grapple controls recently as well as new fuel pump. Skidder has been well kept and is ready for work.

Item ID 100097. Austin x703 06' JD 648G III ($37.5K) Single arch -Winch doesn't have cable from lever to the winch -A/C works, heat good -Center pins have ‘13 KMC 2500 Track a little slack, not horrible -Tires Skidder size: 30.5 -Direct Drive machine -Owner is downgrading, down to Item ID: 14078 1Contact: crew -3yrsAustin owner -Good skidder, will right 401-6367 to work x703 Ph:go(888) Item ID 100077. Joe x709 460 off ontoTIMBERJACK a conveyor. This is a very Timberjack 460 has 5,9 cummins,

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

vans and produce 6 - 8 loads per

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 429

adjustable to single two way. Great

Well maintained. Item ID 13294.

Lumbermens™  since 1986

❘

(excellent condition.). Item ID

good. in good working order. 22in

50% or better. 475 hp Cummins

Firewood Processor - This is a Rotary Dryers homemade processor with a 10’ Sand Dryers log deck.

Has a hydraulic grapple, Grain Dryers Lumber chain andKilns kicker that all runs off Cement Kilns of a 4 cylinder Mercedes power Brick Kilns unit. Has a 4’ chain saw that kicks

grapple, 5,000 original hours.

tach, oil pressure, water temp and

low hours. Control panel includes

but electronic option is available.

Value! PA. Item ID 12062. Sam x702

motor, Rotobec continuous

- Pumps recently redone. 400 hrs

Has Log Lift. Uses 4-way wedge

quality chips with patented ‘Cone’

JOHN DEERE 648H ‘95 John C6 2008 Model Deere John Deere 648H it has the heavy axles, Tree Farmer and around 100 hours on a Item ID: 13920 complete powertrain Contact: Austin warranty, the motor, fuse Ph: (888) transmission, 401-6367 x703 panel, center section, glass, and all of the pins and bushings have either been replaced, or capacity!.

13421. x702 rebuilt.

It Item is asIDclose toSam a new BARKO skidder on the used market as you get.160B Call- for more info.

1994can Barko Electric Item ID 100051.

Austi x703 knuckleboom, 30' boom, n 75hp

with John Deere power unit with

day. Item ID 13882. Austin x703

condition. Easily produces high

Itemmodel ID: 14077 2010 John Deere 648H Contact: Austin -Torque Converter machine Ph: 7500 (888) 401-6367 x703 -Has frame hours -New 210 HP engine installed at 5000 hours -Good Rubber -New windows -Cold AC -Owner operator machine -Working daily Call for more info.

Item ID 100064. Austin x703

automatice firewood processor 1995 Barko 775 B Feller Buncher Clean-Burn Design

drum design. Can easily load 42’

with 1700 hours, in very good

‘93 180B 10' Barko JOHN DEERE 648H

Innovative 13238. Chris x700

a Chomper Model 16 PDA

amp gauges. Cuts logs up to 16”.

Manufacturing a full line of biomass fired One chain conveyer, 8 way splitter, on combustion systems backed with fifty years of owner and comes with all 20,000lb goose neck trailer.

Item ID manuals and receipts. Purchased innovative clean-burn design. Diverse in every way with multi-fuel blending capability.

Hurst 13916. Austin x703 new for $32,500. Item ID 13865. stokers utilize hundreds of common and Sam x702 Best Value Portable Log Splitter abundant solid biomass fuels.

- Small manufacturer in PA has Large or small scale, project LOGGING EQUIPMENT management is eased with the made the best valued log splitter.

BANDIT impressively short installation time Handles logs up to 32”. Uses 1999 Bandit 1900 Tracked Disc required with prefabricated 13HP Honda motor. Manual start Chipper - Cat Under Carriage at modular components.

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

3 speed trans, esco grapple, strong winch, dry skidder doesn't burn oil. Working daily, video available if interested.

Item ID 100049. Austin x703

Diesel. 7500 Hours. One owner.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

on injection pump. always started kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

50

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

YEARS control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

TIMBERJACK 240A GRAPPLE 1992 model Timberjack 240A all original factory made grapple skidder, hour meter shows 2800 hours, but has rolled over, so around 12800 original frame hours. runs great, tight pins and bushings, Thestrong Tree gearmatic no leaks, thathas Started winch that been all rebuilt.

Working daily. it All! Item ID 100048. Austin x703

Since 1986, Lumbermens has published a monthly610C circular TIGERCAT reaching Tigercat sawmills, 610C niceloggers, tight machine pallet makers, recyclers and with 7800 hours currently, has industrial woodworking plants good center pins, and doesn't worldwide.

burn any oil. Working daily. Call PUBLISHER for more info.

Woods Publishing Item ID 100046. Austin x703 ADVERTISING SALES Morris Woods JOHN DEERE 548G2 (888) 401-6367 ext. 704 1997 John Deere 548G2 in morris@lumbermens.co mint condition, skidder has MARKETING 8800 original DIRECTOR frame hours.

John Williamsare tight, Pins and bushings (888) 401-6367 ext. 701 with new center pins put in j@lumbermens.co 1000 hours ago. Also has DESIGN DIRECTOR all new hydraulic lines and Heninger hoses. Donna Skidder has always REPS been EQUIPMENT greased and serviced Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

** CALENDAR**

regularly. glass. This skidder has been culously maintained, and Item ID 99972. AustinNY x703 STATEmeti WOODSMEN'S FIELD DAYS component like it Fri, 18 every August - Sun, 20works August should. CallNew for more CLARK 666C Boonville, York info.

Item ID 100029.

Austin x703 Clark 666C grapple andwww.starwebhosting.net/woodsmen/ winch

skidder, just had the 453 JOHN DEERE 748G3EXPO SOUTHWEST FOREST PRODUCTS Detroit engine overhauled 05’ JD 748G3 Currently working Fri, 25 August Sat, 26 August a few hundred hours ago, daily SkidderArkansas has 6600 original Springs, center section is tight, has Hot frame hours Used a backup new center pins in the front www.arkloggers.com end, along with new pivot pins, skidder most it’s life. John Deere 72NDrebuilt ANNUAL frontGREAT cradle LAKES roughly 10 also replaced all the cylinders LOGGING & HEAVY ago, EQUIPMENT it also had aEXPO new in the continuous grapple. has hours Thurs, 7 Sept - Sat, Sept wiring harness, and9 2 new shift new 23.1 firestone tires on the Michigan solenoids put on 2 months ago. back. Everything else works Escanaba, as it should, no bad leaks, it is Transmission was rebuilt 2 years MID-ATLANTIC BIOMASS ago. AcLOGGING and heat &works.

One woods ready. back ti re is 100% other back is Fri, 15 Sept Sat, 16 Sept Item ID 99903. Austin x703 60% front twoCarolina are 30% Skidder Selma, North has always been Kept serviced www.midatlantic-logging-biomass­ CAT 515 MID-ATLANTIC Runs good, shifts expo.com/ LOGGING & BIOMASS EXPO 2000 model Cat 515 skidder and greased. good..

Operates good VIDEOS with winch It will include a KENTUCKY WOOD EXPO professionally made arch, so AVAILABLE. Sept Sat, 16 Sept Item ID -99967.

Austi n x703 that one could use it as a cableFri, 15 Lexington, Kentucky machine if wanted. It currently TIMBERJACK 450C sits right at 5900 original frame http://www.kfia.org/ 95 Timberjack 450C Grapple / hours. Tire size 28L and theKentuckyWoodExpo.aspx front two tires are going to be Winch Skidder. Has a Prolenc PAUL BUNYAN SHOW that was installed replaced with brand new onesTHEsnubber Fri, 6 Oct Sun, 8 Oct Installed in October 2014. before purchase. Inside the cab Ohio reman Cummins engine has good heat/ac and all good a Cambridge, www.ohioforest.org

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

FOR CLASSIFIEDS Call 888.401.MENS (purchased from Cummins) that nowSee haspictures, only 1,800prices, hours onand it.

New “Heavyof Duty” radiator wasat Location all equipment installed at the same time as www.LumberMB\ISmagazine.com the engine. Both rear-ends have

been re-built. Transmission has & HEADSAWS beenBANDMILLS rebuilt about 4,000 hour Danckaert Band Resaw - Roughly ago.

Center pins have been replaced andthisare tight.since New 10 hours on machine it suspension seat. it Has leaks in / has been rebuilt, hasno a 24foot machine is dry all over. The hour feed deck 20 foot out feed deck meter reads 3,900 hours but with 44 inch wheels, and all the previous owner said he replaced the at around 4,000 bellsmeter and whistles, its a production hours so with machine is conveyers around machine, air strain 8000 frame hours. Has heat but that go up and down, with airbags, no air conditioning. Winch was it includes two sets of Mcdonough rebuilt

by Holt Equipment.

28L pressure guides.

Top Casting wheel X 26 tires at 90%. This machine isisinsupported excellenton shape.

Everything both sides. This operates as it should. was is an extremely accurateThis machine the main machine until they in ve1y good condition, Cuts 130 updated to a feller buncher feet bogie a minute also hasWhenever CLT presses. and skidder.

ID 13876.

Austin itItem needed anything it x703 was fixed back to 125 newBand conditi This will S&W Millon. with make someone an - Low excellent Caterpillar generator hours machine that will provide them on the mill, electronic computer Set years of service. works,1 1/2" or 2"Austi band,n 22ft. track Item ID 100026. x703 Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Item ID: 13997 Contact: Austin Ph: (888) 401-6367 x703

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Contact: Sam Rotochopper ............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

2006 CAT 517

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw13869 Shop.................... 13 Item ID:

- USED FORESTRY EQUIPMENT FOR SALE

❘

Ph: (888) 401-6367 x702

‘14 Komatsu WA200 ❘  24/7 SUPPORT 0 Loader

 SELL YOUR EQUIPMENT TODAY l§

One Owner, low hours!

with onboard log turners, carriage drive, hyd pac for carriage,

‘14 Hurdle 3-Hd Block Sawmill 48" bottom saw and 36" top saw

STACKING ‘05 RAC

Item Con Ph:

Firewood Proc.

Item ID: 13865 Contact: Sam www.BakerProducts.net Ph:800.S48.6914 (888) 401-6367 x702 I S73.663.7711

‘99 51

❘ L!  (888) 401-MENS NO. 19 Item Con boom loader, 3 knife disc, Newer

Ph:

Phone 315.284.4126 Faxmotor in it, doesn't burn or use JOHN DEERE 848H 315.849.2045 any oil, motor rebuilt a few 2012 John Deere 848H Has Website 12,000 frame hours Motor and thousand hours ago, cab has www.empirehyd.com transmission rebuilt 2Emailnew glass. Only thing it doesn't “Precision Underwere Pressure” info@empirehyd.com

years ago. Everything works as it should, skidding wood daily.

Item ID 99963. Austin x703

have is a winch.

Item ID 99894. Austin x703

TIMBERJACK 450C 1996 model Timberjack 450C it has brand new 23.1 primex tires on it, with a set of ice chains. New motor installed two years ago but still has low hours on it, transmission was gone through at that time, as well as the radiator. Has enclosed cab with heat and air.

This skidder has been used as a backup most of the time and is JOHN DEERE 748H 2010 John Deere 748H in really good shape. The only 12000 frame hours, motor flaw is that the owner used it just rebuilt with low hours on as a cable machine and actually it, center section is tight, has sold the grapple, if someone new windshield. All the other was interested, we could help components works like they locate a grapple for you. Call for more info. should. Call for more info.

13428 Victory Austi Ln. //n PO Box 124Item ID 99889. Austin x703 Item ID 99920. x703

TIGERCAT 610E Tigercat 610E dual arch and grapple skidder. Everything works and is woods ready.

Has new 30.5 tires on front, and rears are at 40%, 5900 total frame hours, always greased, and well maintained.

Item ID 99935. Austin x703

LUMBERMEN’S

Equipment Adams Center, NY 13606 Digest TIMBERJACK 240C JOHN DEERE 648E

John Deere 648E dual arch grapple skidder, has the 6068T

GRAPPLE WITH WINCH 1997 Timberjack 240C

Grapple with winch, approx 9,500 hours, recently had $20,000 of work (New torque converter and anything else it needed, hoses, fitting, etc.) excellent 4BT Cummins motor, good 23.1 tires, power ‘16 Halverson H140 shift machine, meti culous maintenance, and upkeep.

Skidsteer (DEMO) Super Rare Skidder! Call for Item ID: JW-909632 more pictures!

Contact: J Williams Item(888) ID 99861.

Austi n x703 Ph: 401-6367 x701

a job until sold. Also note that the grapple is not on in the pictures but does come with the skidder.

Item ID 79616. Austin x703

well built processor. Item ID 13820.

motor, Rotobec continuous

Firewood Processor - This is

(excellent condition.). Item ID

Item Cat ID: 14077 2011 525C dual arch Contact: Austin grapple skidder it has 13000 Ph: (888) 401-6367 x703 frame hours on it but has a new reman engine installed from caterpillar that is still under warranty along with CAT 515 a rebuilt transmission. All 1998 CAT 515 single arch pins and bushings have been Grapple Skidder. New center redone, front axle center pins last year, had a new AC bearing has been changed pump put in not too long ago... also. All pins in grapple, arch, Grapple works good with no and center section have been ‘95 John DeereitC6 issues, cable works good too. redone.

Just calibrated and Ready to hit the woods! call for it Tree shifts and pulls fl awlessly.

Farmer more info.

Just new injectors Itemhad ID: 13920 installed as well. Brand Item ID 99856. Austin x703 Contact: Austin ‘13 KMC 2500 Track new res on the back, Ph:30.5 (888)ti401-6367 x703 Skidder everything works, heat, air, TIMBERJACK 380A Equipment etc.Digest This skidder has Timberjack 380A hasLUMBERMEN’S brand radio, Item ID: 14078 PO Box 1146 been totally gone through new 5.9 cummins motor with a Contact: Austin Columbia,capacity!.

TN 38402-1146 Item IDis13421.

Sam x702 end to end and in excellent 4Ph: speed clark transmission, and (888) 401-6367 x703 1-800-477-7606 Fax (931) 388-3564 BARKO a John Deere winch. Cab www.lumbermenonline.com has shape. Call for more info.

ItemBarko ID 99835.

Austin x703 Heat, windows, and full doors.

1994 160B - Electric Machine will conti nue working off onto a conveyor. This is a very knuckleboom, 30' boom, 75hp Sam x702

‘05 Gehl CTL 70 PROTECT Them ALL ® Wrap With Pro-Tec-To ‘83 John Deere a Chomper Model 16 PDA

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

4850

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

Hydraulic Lines – Fuel Lines One owner and comes with all chain conveyer, 8 way Hoses splitter, on – Air Item ID: 14073 20,000lb goose neck trailer.

Item ID manuals and Contact: AustinElectric Wire Bundles – Control Cablesreceipts. Purchased Ph: (888) 401-6367 x703

13916. Austin x703

Best Value Portable Log Splitter

new for $32,500. Item ID 13865.

Sam x702

® with 1700 hours, in very good -® Small manufacturer in PA has LOGGING EQUIPMENT PRO-TEC-TO WRAP & PRO-TEC-TO SLEEVE

condition. Easily produces high the best valued log splitter.

CUT YOURmade DOWNTIME AND YOUR COSTS!

BANDIT

quality chips with patented ‘Cone’

Handles logs up to 32”. Uses Bandit 1900 Tracked Disc Protection Against Pinching, Crushing, Rubbing1999 & Abrasion 13HP Honda motor. Manual start Chipper - Cat Under Carriage at – EVEN UV RAYS! Both are Impervious to Oils and Solvents.

drum design. Can easily load 42’ vans and produce 6 - 8 loads per

but electronic option is available.

day. Item ID 13882. Austin x703Protection Hasfor LogLogging, Lift. Uses 4-way wedge Provides Maximum

EDGERS & GANGS adjustable to single Construction & Stationary Applications Like: two way. Great

Brewco Saws - Two Brewco Value!

ItemMasts ID 12062. Sam x702 • Debarker Buggies Saws • Pantograph Arms PA. • Forklift

50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

For The Distributor WellNearest maintained.

You,Item CallID 13294.

Sam x702

800-355-1250

• Wheel Loaders • Skidder • Knuckleboom in excellent condition.

Runs great. Grapples Firewood ProcessorLoaders - This is a 2004 Bandit Beast orModel Visit 4680 • Fellerbuncher Heads • Stroke Item ID 13644.

Sam x702Heads • Harvesting homemade processor with a 10’www.pro-tec-toproducts.com 3412 Caterpillar Diesel engine Delimbers • Dozer Blades FIREWOOD PROCESSORS log deck. Has a hydraulic grapple, with 850 HP. 5300 hrs. Mill in

Anywhere Hoses & Wires Are – Pro-Tec-To® Products chain and kicker that all runs off Offers Maximum Protection, Lower Costs, Reduced - It has a 353 Detroit diesel, 40 Downtime and Less Spills! of a 4 cylinder Mercedes power 2010 Shop Built Wood Processor

inch insert tooth circle saw, 30 foot  Issue 364 429

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

‘93 Barko 2011 CAT180B 525C

good condition.

Just finished 10 OEM’s, Repair Facilities & Distributor Inquires Welcome Acre clearing job, ready to work!

Remote control. Big production

 List  seLL  exchange  buy  save

grapple, 5,000 original hours.

13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

1990 Bell Super T - This Bell has

a brand new Duetz engine. Lever

control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR** IntegrIty • PrecIsIon • QualIty • Value

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

Woodmaster The Tree

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

that Started it All! See why we are your BeSt Source for bandsaw blades!

Hot Springs, Arkansas www.arkloggers.com

reaching sawmills, loggers, Escanaba, Michigan blades inand the business—we ship all over the US. palletbandsaw makers, recyclers industrial woodworking plants always guaranteed!

Satisfaction MID-ATLANTIC Item LOGGING ID: 13995 & BIOMASS worldwide.

Wood-Mizer LT40

Fri, 15 Sept - Sat, 16 Sept Contact: Austin

Woods Publishing

thIn Kerf

MID-ATLANTIC

ADVERTISING SALES

LOGGING & BIOMASS EXPO

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

84/85 John Deere feed deck 20 foot out feed deck 440B/C with 44 inch wheels, and all the

Item bells ID: and13908 whistles, its a production Contact: Sam machine, with air strain conveyers Sch Ph: (888) 401-6367 x702

that go up and down, with airbags, Gri

it includes two sets of Mcdonough Item pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

Ask About Our Dismanteling Blades

MARKETING DIRECTOR

10 hours on this machine since it

Selma, North Carolinax703 Ph: (888) 401-6367 www.midatlantic-logging-biomass­ expo.com/

Band saw Blades

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES offer the highest has quality welds and our people useLOGGING the SinceWe 1986, Lumbermens & HEAVY EQUIPMENT EXPO published a monthly circular and precision to give you the best Thurs, 7 Sept - Sat, 9 Sept highest level of integrity

PUBLISHER

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

DESIGN DIRECTOR Donna Heninger

1-888-857-5153

ck REPS • Our Service • Our Price Cheut EQUIPMENT Quality O Our Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org

‘89 Timberjack 380A Item ID: 14039 Contact: Austin Ph: (888) 401-6367 x703

** INFO LINK**

is supported on both sides. This

Con Ph:

is an extremely accurate machine feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set ‘90 Bell Super T

works,1 or 2" band, 22ft. track 201 Item ID:1/2" 13896 Cat 3406 140KW Contact: Sam Genset, 12,400 535 Ph: (888) 401-6367 x702 hours ready to run. Item ID 13434. Item Con Sam x702 Ph:

CARRIAGES DRIVES John Deere Dual Arch&Grapple, 2010 Cardinal HD Carriage John Deere winch, Model 4000,

ROW ELECTRICAL EQUIPMENT, INC.

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

track Carriages (Sawmill) - Cardinal addit Cummins Engine, Model 6BTA, YOUR SOURCE FOR RECONDITIONED: MAILING ADDRESS Carriage line it includes carriage Sam x 13799.

Sam USED, x702 Clark Transmission 28000. Item ID B&• B Squirrel Mfg. ...............................

M&F Gauge .............................

P.O. Box 1916 Cage Motors 18• DC Motors - Crane and Mill •28Transformers, Three-Phase with Austin onboard log turners, carriage 1999 1998 Hydro Ax 611EX Saw Head 13738. x703 Columbia, TN 38402-1916 • Gear Motors • Adjustable Speed Drives • Across/Line Magnetic Starters B. H. Payne .............................. 16 Meadows Mill, Inc.640 ................ 33 John Deere drive, hydKOMATSU pac for carriage, 11k h (888) 401-6367 Feller Buncher about 8800• Reduced • Wound-Rotor Motors • Generators - AC- with and DC Voltage Starters Item ID: 13961 Menominee Saw .....................

29 Baker ......................................

5, 7 • Synchronous Motors • Engine-Generator Sets • Safety Switches engin sawyers cab, computer controls, Grapple AD SUBMISSIONS 2007 Komatsu PC220LC w/2009 hours.

BunchingSkidder Saw Head has Contact: Austin • DC Motors • Transformers, Single Phase • Phase cabinet Convertors ‘06 Western Star Item# 13848 May be sent to­ with electronic drives for fresh Detector's Inc. ..............

30 Bell's Machining ..................... 27 Metal Log Max 7000XT processing head. large pocket for accumulation and Ph: (888) 401-6367 x703 morris@lumbermens.co Contact: P.O. Box 2812 • Toledo, OhioSam 43606 28L 2 carriage knees, husk including Michigan Special 9700 hours on carrier. 7200 hours lifting sideSharpening for notching Brute .............. ax to Force Mfg. ..................... 31 Midwest Ph: (888)shield 401-6367 x702 26 POSTMASTER decen WWW.RoWELECTRiCAL.CoM 48" bottom saw and 36" top saw on Log Max. Excavator style. Cab larger trees before felling.

Item 14011changes to: ItemEquipment ID: 13855 (AIM) ........ 36 Mor Buck bark .....................................

9 419-248-4479 SendID: address rowelec@glasscity.net sales@rowelectrical.com but co computer and Scorpion controls, Contact: Austin Contact: Sam guard. Flotation pads. One owner.

Cummins engine. 28L tires at 60%.

Lumberman's Exchange Corley MfgPHONE ..............................

32 Multitek ...................................

12 and t added speed control.

2 sets of 1996 Timbco T425B FB w/2008 Ph: (888) x703 WE ANSWER THE 24 HOURS • WE BUY USED ELECTRICAL P.O.401-6367 Box 1916 Ph: (888) 401-6367 x702 Very good condition. Item ID Decent running condition. Item ID Columbia, TN 38402 could tracks , all new Lexan. Located in RotosawSaw Intermittent Saw Head.13 Shop....................

CRD Metalworks .................... 25 Piper's 13464. Sam x702 13245. Sam x702 bushe Alberta, Canada. Customer will Machine has 540 degree non 40 The Lumberman's Exchange is CW Mill-ArmorHog .............. 17 Rotochopper x702 HydroAx 611B - New injectors, 2008 Komatsu D61-EX Dozer 2002 Hydro Ax............................

621E - Arouund published monthly by Woods 13212 pay shipping to closest US entry continuous rotation on upper. 9900 CW Mill-Hogzilla ................... ............................

2004 Hydro AxBox 4701916, - This cutter injector pump. New 5.9 cummins15 Row - Great Condition. 4511 Hours.

12,000Electric hours on this machine. 20 Publishing, P.O. TOP PERFORMING, economical blades for all primary & 2000 point.

Item ID 13532.

Sam x702 hours.

New Undercarriage.

New Columbia, TN7000 38402.

All rights secondary wood processing.

Welded todaily. your lengths! has around hours.

It’s a clean engine.

Rebuilt hydraulic pump Komatsu U/C at 95%. 35% Pads. 6 Working Item ..................

ID 13884. 11 Dyna Products ........................

35 Sawmill Exchange reserved. All editorial/ advertorial 4-Rol 1998 Timberline Stroke Delimber glass in cab. Very We also offer expert sharpening services, plus... good running and tight machine. and new teeth. Item Gang ID 13768.

Sam Way Blade. Fully Enclosed comfort Austin x703 submissions are used Only at the reason • Edger • Scragg • TrimSawmill • Split • Strob Empire Hydraulics ...................

8 Select .........................

19 8400 hours. U/CScragg at 60%. Will crank on m condition.

Rotosaw has 360 degree Sanborn discretion thetopublisher and may ....and just about any Custom Saws youSaw need Head Feller selling is of due an upgrade.

Item x702 cab. Great price!. Item ID 13570.

1998 711EX Mill engin and run. Owner retired. Machine rotation.

Cummins 6CT8.3 engine4 be edited for purposes of clarity ‘16 Halverson H140 to keep longer...

Great Lakes Mfg. ....................

34you cutting Smith Sawmill ...........................

Bell Ultra T on ‘05 CAT TK560 ID 13846.

Sam x702 1999 Hydroax 511EX New Sam x702 Buncher 30.5-32 tires at 40%; for less. Ask about FREE Shipping! and space. Although all efforts have Item ID: 14050 U/C idle for past year. Item ID 13599. with 215ID: HP. Machine runs great.

Skidsteer Item 14004 Paul Bunyan Show .........

39 Hahn Machinery ...................... been made to Ax ensure Tracks Contact: Austin 2004 Hydro 670accuracy - Engineofhas cummins engine with only 1500 3 The 2012 Komatsu D61EXWoods 15 Dozer Cummins Engine rebuilt 1500 Item ID: JW-192810 Contact: Samhardwood today. with Sam x702 Working in select content submitted by advertisers Item ID: 14023 (888) 401-6367 Ext. 606 Contact: J Williams Hurst Boiler .............................

Industrial Controls ..... 10 Ph: (888) 401-6367 x702 about 500 hours, new saw motor hours.

Caterpillar just replaced 14 Thomas with only 750 Hours. Triple hours ago; 8750 hours; Quadco and writers, theSam Lumberman's Contact: Ph: (888) 401-6367 x701 pump 1999 Timbco 820D Clam Bunk Item ID 13548. Sam x702 Exchange, its principles andx702 Ph: (888) 401-6367 and disc last year. Previous owner gear to................................... hydraulics at the end 21 Union Rippers; Limb Sweeps; Enclosed 22” tree820C saw Clam head.

Heat Ironbox Bull Grove Saw & Knife .. 2,and 37 new m Forwarder - 10,300 hours.

New 1997Large Timbco Bunk

‘15 Cord King M44

‘08 John Deere F CT332 :

800-248-4479

419-244-8887

BANDSAW

All Sizes Available!

BLADES

associates, are not held liable for had the hydrastatsReproduction, redone. This errors or omissions. with winch, direct drive. Comes in whole or part, is prohibited with­ has 22” high head and is witha 6000 hourcapacity extended warranty. out written consent. only 2600 hours. Has new on aHas very clean machine.

Mounted ©2017 Woods Publishing

STACKING RAC

1977 (est) FMC 220CA Tracked

13910. Austin x703

x702

There are a few leaks, but nothing

of summer.

11000 hours total on 22 Universal cab withless Heat/AC; way blade; A/C work.Refiner bearings in saw.

Kilgore Saw ...................

23 coole engine than 5006hours Forwarder -New “4000” original hours. does great job ............................. in hardwood. Priced Skidder w/ESCO Swing Boom Franklin 170 Skidder - Thisago. would cutter.

80%,x702 2 Undercarriage at skidder.

90%; Excellent Cutting trees today.

ItemHand ID 13353. to sell!.Tires Itemare ID 28L’s 12206.@Sam Grapple -rubber Good running condition. be a great starter It is Packa Can accept bunks, but none with 20.3 x 25 at 70%. www.BakerProducts.net Lignomat .................................

24 WoodMizer Call Marvin Miller for a quote ................................ l John 20 hole Sweda Front blade.

Detroit 6V53 engine. a single archItem withID winch.

Runs @ 40%Deere and one slick.

Brandwheels new Condition!.

13459.

Sam 800.S48.6914 I S73.663.7711 231-924-5953 (fax) 231-924-6166 Sam /sanded 11606 x702 Brickyard Road • Holton, MI 49425 extra machine. Owner has two sets of and painted, brand new ©2019 Wood-Mizer LLC 30.5 X 32 26 ply on rear and 70% - These 50’s are mounted on hard No winch....they cannot fit with good and pulls good. Detroit 453 KMC 34’s with 50% tread. Item ID 13828. center section. 20” single post x702 front.

Still a newEQUIPMENT skidder and FOR SALE to find 20 John Deere swing boom ❘grapple.

Military style turbo 3 speed power shiftNO. 21 FORESTRY ❘ hole  SELL YOURsweda EQUIPMENT  24/7 SUPPORT ❘ L!  and 401-MENS -on USED l§ TODAY (888) 0  Issue 364 Lumbermens 1986 ❘ Good List section. seLL  exch KMC Skidder 2500P - Sam since Sam x702 head.

Heat50% andtread air work.

Item ID 2014 Komatsu 450- Only priced to sell. Item ID 13696. Sam rims. Still left on these tracksTrack at 70%.

Item ID 13227. transmission. center1100 x702

tires. 4 available. Item ID 13852.

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

INDUSTRY NEWS

CW Mill Equipment Reaches Milestone, Celebrates ‘93 Barko 180B 50th Anniversary ‘16 Halverson H140 Item ID: 14077 “Precision Under Pressure”

Contact: Austin (DEMO) innovative ` Since its inception, CW Mill Equipment Co., Inc. has Skidsteer sought to manufacture grinding mill Ph: (888) 401-6367and x703 Item ID: JW-909632 equipment. This year, the company is celebrating its 50thContact: anniversary since its founding by Clyde Wenger in J Williams 1973. CW Mill Equipment serves a wide variety of industries, from forest products to vehicles to agriculture Ph: (888) 401-6367 x701 and much more.

The CW brand familiar to pallets and sawmills is the HogZilla® line of industrial grinders and related equipment. HogZilla offers grinding machines, high-performance hammer mill cutting and grinding tools for rigid and swing hammer style grinding machines, and automotive installation kits for crankshaft-driven aftermarket accessories.

‘95 John Deere C6 The grinding machine and parts division also serves many industries, including the commercial, municipal, Tree agricultural, and industrial material processing industries, by providing whole machines andFarmer sub-components Item ID: 13920 to process most organic and some non-organic materials. Special uses within these industries include animal Contact: Austin ‘13 KMC 2500 Track food processing, disaster recovery, waste volume reduction, recycled material processing, Ph: (888)forestry 401-6367product x703 Skidder grinding, forestry-derived fuel production, land clearing, utility right-of-way maintenance, organic compostItem ID: 14078 ing, scrap tire Ln. grinding, and 13428 Victory // PO Box 124tire-derived fuel production.Contact: Austin capacity!. Item ID 13421. Sam x702 Adams Center, NY 13606 Some major brands owned by CW Mill Equipment include for industrial tub & horiPh: (888)www.hogzilla.com 401-6367 x703 BARKO zontal end feed style grinding machines, www.armorhog.com for extreme-duty parts for rigid hammer style 1994 Barko 160B - Electric grinding machines, and www.dynahog.com for heavy-duty parts for swing hammer knuckleboom, style grinding machines. off onto a conveyor. This is a very 30' boom, 75hp

FW-16 FIREWOOD WRAPPER ‘05 Gehl CTL 70 IN-STOCK & READY TO SHIP!

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

TheJohn Go FastDeere Firewood Wrapper ‘83 produces better firewood 4850

chain conveyer, 8 way splitter, on

bundles than the rest.

Item ID: 14073 20,000lb goose neck trailer. Item ID Contact: Austin The FW-16 Firewood Wrapper 13916. Austin x703 Ph: (888) 401-6367 x703

is built with true gear reduction, Best Value Portable Log Splitter large bearings, and heavy-duty with 1700 hours, in very good - Small manufacturer in PA has frames, outlasting condition.

Easily producesthe high made the best valued log splitter. quality chips with patented ‘Cone’ Handles logs up to 32”. Uses competition. drum design. Can easily load 42’

13HP Honda motor. Manual start

day. Item ID 13882. Austin x703

Has Log Lift. Uses 4-way wedge

Simple, Safe, and Reliable. but electronic option is available.

vans and produce 6 - 8 loads per

Standard EDGERSFeatures: & GANGS

• 1/3HP Brewco Saws120V - Two Motor Brewco Saws

in excellent condition. Runs great.

• Fork Pockets Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 429

Options: adjustable to single two way. Great

•Value!

WheelPA.Kits Item ID 12062. Sam x702 Processor - This is a •Firewood Automatic Wrap Cycle!

homemade processor with a 10’

Production Without Compromise log deck. Has a hydraulic grapple, THAT’S THE GO FAST WAY chain and kicker that all runs off

1-800-854-7439 WWW.GOFASTMFG.COM of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

well built processor. Item ID 13820.

motor, Rotobec continuous

Firewood Processor - This is

(excellent condition.). Item ID

Sam x702

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

grapple, 5,000 original hours.

13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

19 delimber, grapple has been rebuilt. 44 as a backup as needed. Has a CTR Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

Item Con Ph:

** CALENDAR** INDUSTRY NEWS

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

OSHA Fines Arkansas Sawmill

Boonville, New York www.starwebhosting.net/woodsmen/

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

“This is not the first time an employee Anthony A federal workplace safety investigation determined BANDMILLS &ofHEADSAWS SOUTHWEST FOREST PRODUCTS EXPO has died due Danckaert the company’s that a 39-year-old employee of a south Arkansas Band Resaw -failure Roughly Fri, 25Timberlands August - Sat, 26 August 10 hoursrequirements on this machine since sawmillThe suffTree ered fatal injuries from a lumber stacking Hot to Springs, followArkansas established safety forit that Started www.arkloggers.com has been rebuilt, it has a 24foot working near automated machinery,” said OSHAin machine at its Bearden location. it All! feed deck“This 20 foot out feed deck director McCullough. company’s OSHA inspectors found the employee of Anthony 72NDarea ANNUAL GREATKia LAKES with 44 inch wheels, and all the Since 1986, Lumbermens has LOGGING & HEAVY EQUIPMENT EXPO Timberlands Inc. was cleaning around and beneath continued disregard for the safety and well-being of published a monthly circular 7 Sept - Sat, 9 Sept whistles, its a production the machine February when its hoist table fell.Thurs, its employees is inexcusable bells andand must stop. Ensuring reaching sawmills, in loggers, Escanaba, Michigan machine, with air strain conveyers pallet and system was installed in 2022 workers’ safety is not optional, it’s the law.”

The makers, lumberrecyclers stacking that go up and down, with airbags, industrial woodworking plants MID-ATLANTIC LOGGING & BIOMASSInc. has approximately 800 without any barrier devices to prevent employees Anthony Timberlands worldwide. it includes two sets of Mcdonough Fri, 15 Sept - Sat, 16 Sept employees at seven Arkansas locations. from entering the area beneath the stacker hoist.

PUBLISHER pressure guides. Top Casting wheel Selma, North Carolina Woods Publishing OSHA cited the company for four serious violations, www.midatlantic-logging-biomass­ is supported on both sides. This MID-ATLANTIC ADVERTISING SALESto provide expo.com/ including failing lockout and tagout is an extremely accurate machine Morris Woods in ve1y good condition, Cuts 130 procedures to ext. prevent (888) 401-6367 704 a machine from starting and KENTUCKY Every Wide Band WOODReputable EXPO morris@lumbermens.co feet a minute also has CLT presses. moving during maintenance, not ensuring that guardsFri, 15 Sept - Sat, 16 Sept Supplier Offers MARKETING DIRECTOR Item ID 13876. Austin x703 Kentucky were inJohn place beneath the stacking system, failing to Lexington, 3 High Quality Swedish Steel Williams http://www.kfia.org/ S & W 125 Band Mill with provide barriersext.to701 stop employees from entering theKentuckyWoodExpo.aspx (888) 401-6367 3 3” – 8” Band Width Caterpillar generator - Low hours j@lumbermens.co danger zone, and not making sure to have signage in 3 16 to 20 Gage on the mill, electronic computer Set DIRECTOR THE PAUL BUNYAN SHOW placeDESIGN to warn employees about crushing hazards.

3 Double Cut Options Donna Heninger works,1 1/2" or 2" band, 22ft. track Fri, 6 Oct - Sun, 8 Oct ‘06 Brewco B1600 TheEQUIPMENT agency proposed $218,759 in penalties for the 3 Choice Stellite 3406 140KW Genset, 12,400 Cambridge, Ohio of Swage or Cat REPS Resaw violations.

Sam Wall www.ohioforest.org hours ready to run. Item ID 13434.

LOGGING & BIOMASS EXPO

(888) 401-6367 ext. 702 Item ID: 13862 sam@lumbermens.co

Contact: Sam Austin When You Woods Buy Yourx702 Circular Saws From B.H. Payne Ph: (888) 401-6367

** INFO LINK**

‘05 Woodmizer LT300

(888) 401-6367 ext. 703 You’ve Bought the best... We Guarantee It! austin@lumbermens.co

MAILING ADDRESS Item ID: Combined 14031 TraditionalB & Quality B Mfg. ............................... 18 P.O. Box 1916 Contact: Austin With Todays Technology Columbia, TN 38402-1916 Ph: (888) 401-6367 x70316 B. H. Payne ..............................

Quality Brand (888) 401-6367

Reg. U.S. Pat Off

Call 800 752-0627

Baker ...................................... 5, 7 Circular Saws AD SUBMISSIONS Make Sure To Ask For Our Free, Complete Saw Catalog SawMay Bits andbe Shanks sent to­ Bell's Machining ..................... 27 Circular Knives We Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth morris@lumbermens.co Carbide Tipped Saws Brute Force Mfg. ..................... 31 CarbidePOSTMASTER Strobe ® Saws Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also B.H. Payne & Company Stock & Sell Bits & Shanks, Tips, Diamond Wheels, BuckCarbide Equipment (AIM) ........ 36 Send address changes to: Saw Manufacturers Knife Grinding Wheels, Saw Gumming Wheels & Knives.

John Deere 548G2 Lumberman's Exchange

Corley Mfg .............................. 32 Item ID: 14042 Here’s P.O. WhatBox You1916 Get With Every B.H. Payne Saw Contact: TN Austin Columbia, 38402 CRD Metalworks .................... 25 • Saws from only the Highest Quality Nickel Alloy Steel.

Ph:manufactured (888) 401-6367 x703 ‘14 B66TD The• Lumberman's Exchange is CW Mill-ArmorHog Each Saw Milled with State-Of-The-Art Precision CNC Milling..............

Machine.17 published monthly

by Saw Woods Rotochopper • We Tension Your to Your RPM Speed BEFORE Leaving Our Factory.15 CW Mill-Hogzilla ...................

- 3410P.O. hours.

Publishing, Box $32,000 1916, in recent • Your Satisfaction Completely Guaranteed.

Columbia, TN 38402. All rights Item ID: 13838 upgrades and repairs. Fecon

Dyna Products ........................ 35

WOLVERINE

Sam x702 BUT ONLY THE CARRIAGES & DRIVES

BY MENOMINEE SAW GUARANTEES 2010 Cardinal HD Carriage

• Cutting Edge Plasma Welds Carriages (Sawmill) - Cardinal • The Industry’s HighestCarriage Band Saw line it Capacity includes carriage M&F Gauge ............................. 28 with onboard log turners, carriage • Quick Delivery from our HUGE Inventory Meadows Mill, Inc. ................ 33 drive, hyd pacPusher for carriage, 14’ Snow • Fast Sharpening & Exchange Program Menominee Saw ..................... 29 Item ID:cab, JW-492406 sawyers computer controls, to Keep YOU Running Contact: ‘11 Doosan DL200 J Williams cabinet with electronic drives for Metal Detector's Inc. .............. 30 Item•ID: JW-113876 Pricing Ph: (888) 401-6367 x701 Competitive carriage knees, husk including Midwest Sharpening .............. 26 J Williams Contact:

48" bottom saw and 36" top saw Ph: (888) 401-6367 x701 9 And ONLY Menominee Gives You Everything Morbark .....................................

You need in a 12 Wide Band Saw – Plus Multitek ...................................

STACKING RAC

Expert Service from the Industry’s Most Knowledgeable Staff.

Piper's Saw Shop.................... 13

Rotochopper............................ 40

Got a Wide Row Electric ............................

20 Band Problem?

Call Menominee Saw Today and You’ll

Sawmill Exchange .................. 11

‘04 Fabtek 344B

reserved. All editorial/ advertorial Contact: Sam Learn Why More Mills Trust the Pro! BH250are Mulching Head. Item ID submissions used at the Empire (888)Hydraulics 401-6367 ...................

Ext. 603 8 Select Sawmill ......................... 19 Item ID: JW-093430 discretion of the publisher and may 13502. Sam x702 be edited for 90608 purposes of clarity Contact: J Williams Great Lakes Mfg. .................... 34 Smith Sawmill ........................... 4 P.O. Box 2011Although Tigercat 620D - This is a and space. all efforts have Ph: (888) 401-6367 x701 East Point, GA 30364 ......................

3 The Paul Bunyan Show ......... 39 been made to ensure accuracy ItemMachinery ID 13408. Sam x702 low hour skidder with of only 5500 Hahn 404 submitted 761-8711by advertisers content .............................

2014Boiler Tigercat 630D Grapple 14 Thomas Industrial Controls..... 10 hoursthe a cummins engine and Hurst andFax writers, Lumberman's 404 on 761-5398 Item ID: JW-538174 Processor - This is a Chomper Exchange, its principles and 900&16th Menominee, MI 49858 - Dual Arch Grapple. 21 Just Union Grove Saw a fire suppression system. Comes IronSkidder Bull ...................................

KnifeSt., .. 2, 37 Contact: J Williams associates, are not held liable for super 14, with a 60hp engine. In Tel: 906-863-2609 Fax: 906-863-1147 1990 hours.

3 year/5000 hour PT mounted on 35.5 tires at 50% back Ph: (888)Refiner 401-6367 x701 23 “Since 1890” Reproduction, errors or omissions.

Kilgore Saw ............................. 22 Universal ................... very nice shape. Only 171 hours, Email: info@menomineesaw.com in whole or40% part,front is prohibited warranty. 35.5 tires with dualing and and goodwith­ chains on www.BakerProducts.net Lignomat ................................. 24 WoodMizer ................................ l out written consent. comes with green chain conveyer.

60%. Wide blade. Winch. all 4 info@paynesaws.com tires. Has the bigger 630 axles Webrings 800.S48.6914 I S73.663.7711 E-mail: Site:atwww.paynesaws.com ©2017 Woods Publishing All of the manuals for the engine, Waratah 624 Super - New

B.H. Payne & Company, Inc.

‘05 Transport Trailers Custom Log Pup

TOLL FREE 1-800-582-0470

WWW.MENOMINEESAW.COM

and no winch. Center pins are tight Item ID 13526. Sam x702 and the(888) chopper itself come with Computer for❘ head (Logrite).

FORESTRY FOR SALE2015❘ Tigercat  SELL YOUR EQUIPMENT grapple 24/7 SUPPORT ❘ 2006  - USED l§ TODAY L! roatation on the0 w/ a Tigercat401-MENS 630C Grapple NO. 23 234B Loader - Model and extra fuel EQUIPMENT tank. Item ID 13929. it, as well as all of the electrical 10500 hours. New main pump 30’ reach on the boom. Joystick Skidder - Very good running 234B. Only 300 hours on this Sam x702

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

SAFETY ALERT

Driver Injured by Side Mirror Impact with Oncoming Truck “Precision Under Pressure”

BACKGROUND It was a clear winter morning in the Southeastern US. A logging company pickup truck was traveling to the job site around dawn.

PERSONAL CHARACTERISTICS The logging company pickup truck’s side mirror was struck by the extended mirror of an oncoming dual rear-wheel truck that crossed the center line of the road.

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

ACCIDENT ‘95 John Deere C6 The pickup truck was traveling westbound on a state highway when it encountered heavy oncoming traffic.

Tree Farmer The driver was traveling at the posted speed limit of 55 mph and was wearing his seatbelt. A dark-colored “dually” truck Item ID: 13920 Contact: Austin crossed the center line, and the extended side mirror of the truck ‘13 struck the side mirror of the logging company pickup truck.

KMC 2500 Track

Skidder

Ph: (888) 401-6367 x703

Item ID 13694. Sam x702

INJURY Item ID: 14078 13428 Victorybroke Ln. // the PO Box 124 side mirror on the pickup truck.

The collision driver’s Flying Austin debris from the damaged mirror also shattered the Contact: capacity!. Item ID 13421. Sam x702 Center, NY 13606 Ph: (888) x703 driver’sAdams side window.

The pickup driver was showered with broken glass,401-6367 and a piece of the broken mirror entered the cab, BARKO striking the driver in the head. The driver activated his emergency flashers and called his boss1994 to report the accident. The Barko 160B - Electric boss was traveling approximately 300 feet in front of the pickupoff and instructed the driver to safely pull off the road and meet onto a conveyor. This is a very knuckleboom, 30' boom, 75hp him to assess the damage and injuries. They stopped approximately one-half mile from the accident scene. The boss brushed well built processor. Item ID 13820. motor, Rotobec continuous the broken glass off the driver and did not notice any visible Sam x702 grapple, 5,000 original hours. cuts, bruises, bumps, etc.

The driver was Item emotionFirewood Processor - Thisbleeding, is (excellent condition.).

ID ally shaken from the incident and claimed that his neck and a Chomper Model 16 PDA 13238. Chris x700 left hip were sore.

The driver informed his boss that he was ‘05 Gehl CTL 70 automatice firewood processor 1995 Barko 775 B Feller Buncher fi ne John and Deere declined further medical- Pumps evaluation. worked his Item ID: JW-986495 with power unit with recentlyHe redone.

400 hrs Contact: J Williams entire shiftControl the day of includes the accident informed bossstarted that low hours. panel onand injection pump.his always Ph: (888) 401-6367 x701 he would see him the next morning. tach, oil pressure, water temp and good. in good working order. 22in ‘83 John Deere Instead reporting work thekohing following day, works the employamp gauges.ofCuts logs up to to 16”. head. head great.

4850 ee himself Room, citing pain Onetransported owner and comes with to all the Emergency Item ID 13185.

Sam x702 chain conveyer, 8 way splitter, on Item ID: 14073 in his head and hip.Purchased The employee provided anengine “Out with of 20,000lb goose neck trailer. Item ID manuals and receipts.

1999was Barko 160D - new Contact: Austin Work” note for two days and prescribed pain medication and 13916. Austin x703 new for $32,500. Item ID 13865. approximately 1500 hours. Hour Ph: (888) 401-6367 x703 aSam muscle possible concusx702 relaxer. He was diagnosed Best Value Portable Log Splitter meterwith dont a work.

The last 2 owners sion LOGGING and was EQUIPMENT encouraged to seek additional fromor with 1700 hours, in very good - Small manufacturer in PA has have only used treatment it to load trucks his PrimaryBANDIT Care Physician. Two later, the driver recondition. Easily produces high made the best valued log splitter. as adays backup as needed.

Has a CTR turned to the Emergency Room complaining of a closed head quality chips with patented ‘Cone’ Handles logs up to 32”. Uses 1999 Bandit 1900 Tracked Disc delimber, grapple has been rebuilt. injury, pain, and left drum design. Can easily load 42’ 13HP Honda motor. Manual start Chipperleft - Catear Under Carriage at hip pain.

Boom cylinders have minor leaks. vans and produce 6 - 8 loads per

but electronic option is available.

50% or better. 475 hp Cummins

EDGERS & GANGS

adjustable to single two way. Great

maintained.

Item ID 13294. and safe with low at hours at 3,500.

5.9 •Well Always maintain a proper distance from the center Sam x702 CUMMINS continuous grapple. line on divided highways.

Bandit Beast Model 4680 - cameras Runs in Great!.

Item ID 13740. Sam •2004 Consider installing dash company-owned ve3412 Caterpillar Diesel engine x702 hicles to protect employees and other business assets.

850 HP. 5300 hrs. Mill in to seek medical attention BELL after acci•with Encourage employees good condition. finished 1990 Bellseeking Super T -legal This Bell has dents even ifJust they resist10and consider counsel Acre ready to work! andayour brandcompany new Duetzfrom engine.

Lever onclearing ways tojob, protect yourself injured Remote control.who Big production 33” bar, pump and tranny employees refuse medicalcontrol, treatment after an accident.

day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 429

Has Log Lift. Uses 4-way wedge

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

RECOMMENDATIONS Diesel.

7500 Hours. One owner. FOR94CORRECTION Barko 275 - Excellent value

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck LIST SELL EXCHANGE BUY SAVE

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

with 44 inch wheels, and all the EST

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

1986

bells and whistles, its a production

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This

Visit our NEW Merchandise Store MID-ATLANTIC

ADVERTISING SALES

LOGGING & BIOMASS EXPO

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR

is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.lumbermenco.com

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

❘

www.BakerProducts.net 800.S48.6914 I S73.663.7711  (888) 401-MENS L!

NO. 25

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer Notcher

(Challenger machine built) Item ID: 100125

Log Max 7000 Item ID: 96628

Contact: JOE Contact: AUSTIN Email: Joe@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 13428 Victory Ln. //709 PO Box 124Phone: 888-401-6367 EXT 703 (C) 801-362-2170 (C) 931-797-8029 Adams Center, NY 13606

Scragg ‘13Precision KMC 2500 Track Item ID: 3607 Skidder Contact: AUSTIN Email: Item Austin@lumbermensco.com ID: 14078 Phone: 888-401-6367 EXT 703 Contact: Austin (C) 931-797-8029

Ph: (888) 401-6367 x703

off onto a conveyor. This is a very

B U Y S

well built processor. Item ID 13820.

Ford Picker Truck Item ID: 100027

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

H O T

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

75” Fulgham Chipper

with 1700 hours, in very good Item ID: 41386 condition.

Contact:Easily SAM produces high

Email:chips Sam@lumbermensco.com quality with patented ‘Cone’ Phone: 888-401-6367 EXT 702 drum design.

Can easily load 42’ (C) 615-596-4148

vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

Ford 9000/Serco 8500 FIREWOOD PROCESSORS

Item ID: 100057 2010 Shop Built Wood Processor Contact: AUSTIN

- ItEmail: has a Austin@lumbermensco.com 353 Detroit diesel, 40 Phone: 888-401-6367 EXT 703

inch insert(C)tooth circle saw, 30 foot 931-797-8029  Issue 364 429

Case FLX437 Floater Picker Log Truck Item ID: 18710

‘05 Gehl Contact: SAM CTL 70

Email:ID: Sam@lumbermensco.com Item JW-986495 Phone: 888-401-6367 EXT 702 Contact: J Williams (C) 615-596-4148 Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

TimberPro TF830D Best Value Portable Log Splitter Combo Machine

- Small manufacturer in PA has Item ID: 1360 made the best Contact: SAMvalued log splitter.

Sam x702

Timbco 445EXL- This Hotsaw Firewood Processor is Feller Buncher a Chomper Model 16 PDA Item ID: 47200

automatice firewood processor Contact: SAM

Firewood Processor - This is a

homemade processor with a 10’

Tigercat 822

log deck. Has a hydraulic grapple, Item ID: 85680 chain and kicker that all runs off Contact: AUSTIN Austin@lumbermensco.com ofEmail: a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703

unit. Has(C) a 4’ chain saw that kicks 931-797-8029

Lumbermens™  since 1986

❘

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID

Warratah FS20

13238. Chris Itemx700 ID: 100118

kohing head. head works great.

tach, oil pressure, water temp and One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

‘92LOGGING Timberjack 450C EQUIPMENT Item ID: 81886 BANDIT Contact: AUSTIN

50% or better. 475 hp Cummins

Value! PA. Item ID 12062. Sam x702

1994 Barko 160B - Electric

amp gauges. Cuts logs up to 16”.

Phone: 888-401-6367 EXT 702

but electronic option is available.

adjustable to single two way. Great

BARKO

low hours.

Control panel includes (C) 615-596-4148

Email: Austin@lumbermensco.com 1999 Bandit 1900 Tracked Disc

Has Log Lift. Uses 4-way wedge

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) Item 931-797-8029 capacity!.

ID 13421. Sam x702

1995 Barko 775 B Feller Buncher Contact: AUSTIN Email: Austin@lumbermensco.com - Pumps recently redone. 400 hrs Phone: 888-401-6367 EXT 703 on injection pump. always started (C) 931-797-8029

Email: Sam@lumbermensco.com with John Deere power unit with

Email: Sam@lumbermensco.com Handles logs up to 32”. Uses

Phone: 888-401-6367 EXT 702 13HP Honda motor. Manual start (C) 615-596-4148

Great Lakes Log Item ID: 13920 Trailer/Serco Contact: Austin 7000 Item 401-6367 ID: 100092 x703 Ph: (888)

good. in good working order. 22in Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meterTimberjack dont work. The230E last 2 owners

Cable Skidder

have only used it to load trucks or Item ID: 70028 as a backup Contact: SAMas needed. Has a CTR

Phone: 888-401-6367 EXT 703 Chipper(C) - Cat Under Carriage at 931-797-8029

Email: Sam@lumbermensco.com delimber, grapple has been rebuilt.

Phone: 888-401-6367 EXT 702 Boom cylinders have minor leaks.

(C) 615-596-4148

Diesel. 7500 Hours. One owner.

94 Barko 275 - Excellent value

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine withJohn 850 HP.Deere 5300 hrs. 648G Mill in

Item ID 13694. Sam x702

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

99’ Woodmizer BELL LT 70

Item ID: 68404 good condition. Just finished 10 Contact: AUSTIN

Item ID: 100129 1990 Bell Super T - This Bell has Contact: JOE

Phone: 888-401-6367 EXT 703

control, (C) 33”801-362-2170 bar, pump and tranny

Email: Austin@lumbermensco.com Acre clearing job, ready to work!

Remote (C) control.

Big production 931-797-8029

 List  seLL  exchange  buy  save

aEmail: brandJoe@lumbermensco.com new Duetz engine. Lever Phone: 888-401-6367 EXT 709

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

Ryans Saw Head Fri, 25 August CAT 517 Grapple Dozer - Sat, 26 August

TheID: Tree Item 99823

that Started Contact: AUSTIN Email: Austin@lumbermensco.com it All! Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Item ID: 4987

ItemArkansas ID: 48152 Hot Springs,

Contact: AUSTIN Contact: SAM www.arkloggers.com Email: Austin@lumbermensco.com Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 702 72ND ANNUAL GREAT LAKES (C) 931-797-8029 (C) 615-596-4148

LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Phone: 888-401-6367 EXT 703 MARKETING DIRECTOR (C) 931-797-8029

Contact: AUSTIN Contact: AUSTIN KENTUCKY WOOD EXPO Email: Austin@lumbermensco.com Fri, 15 Email: Austin@lumbermensco.com Sept - Sat, 16 Sept Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 Lexington, Kentucky (C) 931-797-8029 (C) 931-797-8029

Item ID: 16326

Donna Heninger

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Send address changes to: RISLEY ROLLY 3 Lumberman's Exchange ItemBox ID:1916 2390 P.O.

Contact: SAM TN 38402 Columbia, Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 The Lumberman's Exchange is 615-596-4148 published(C) monthly

by Woods

Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's FR21B Hotsaw Exchange, its principles and Item ID: 99906 associates, are not held liable for Contact: AUSTIN Reproduction, errors or omissions. inEmail: whole Austin@lumbermensco.com or part, is prohibited with­ Phone: 888-401-6367 EXT 703 out written consent.

(C) 931-797-8029 ©2017 Woods Publishing

bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

John Deere is supported on both640D sides. This

Cable Skidder is an extremely accurate machine Item ID: 74703 in ve1y good condition, Cuts 130 Contact: SAM

Email: Sam@lumbermensco.com feet a minute also has CLT presses.

Phone: 888-401-6367 EXT 702 Item ID(C)13876.

Austin x703 615-596-4148

S & W 125 Band Mill with

Caterpillar generator - Low hours

on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

Cat 3406 140KW Genset, 12,400

CAT 518 Grapple Skidder

PT20H Danzco Delimber

Sam x702 Prentice 210E Loader

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Contact: AUSTIN 2010 Cardinal HD Carriage Email: Austin@lumbermensco.com Carriages (Sawmill) - Cardinal Phone: 888-401-6367 EXT 703 (C) 931-797-8029 Carriage line it includes carriage

EQUIPMENT REPS

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 MAILING ADDRESS

Item ID: 6478

http://www.kfia.org/ KentuckyWoodExpo.aspx

DESIGN DIRECTOR Sam Wall (888) 401-6367 ext. 702 FAEsam@lumbermens.co Forestry Mulch Head Item ID: 3005 Austin Woods Contact: (888) AUSTIN 401-6367 ext. 703 Email: Austin@lumbermensco.com austin@lumbermens.co

with 44 inch wheels, and all the

** INFO LINK** Item ID: 74169

L O G G I N G

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Contact: AUSTIN has been rebuilt, it has a 24foot in Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703deck feed deck 20 foot out feed (C) 931-797-8029

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

ADVERTISING SALES Tigercat

Morris Item ID:Woods 53616 (888) AUSTIN 401-6367 ext. 704 Contact: morris@lumbermens.co Email: Austin@lumbermensco.com

Danckaert Resaw - Roughly 725BBand TimberPro ID: machine 11870 since it 10 hoursItem on this

Escanaba, Michigan

Selma, North Carolina www.midatlantic-logging-biomass­ MID-ATLANTIC John Deere Dymax Tree Shear expo.com/ LOGGING & BIOMASS EXPO 350

Woods Publishing

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO

Timbco 425D

hours ready to run. Item ID 13434.

CARRIAGES & DRIVES Item ID: 79682

Item ID: 14134

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Grapple Skidder

Cable Skidder

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 440B 36" top saw John Deere

Buck Equipment (AIM) ........ 36

Timberjack 360C 9 Morbark .....................................

Corley Mfg 32 Item..............................

ID: 70897

Multitek ...................................

12 Item ID: 63219

Contact: AUSTIN CRD Metalworks .................... 25

Contact: SAM Piper's Saw Shop.................... 13

Phone: 888-401-6367 EXT 703 CW Mill-ArmorHog ..............

17

Phone: 888-401-6367 EXT 702 40 Rotochopper ............................

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

ID: 20661 Iron BullItem ...................................

21

Union Grove & Knife.. 2, 37 ItemSaw ID: 92662

John Deere 548E

Feller Buncher

Contact: AUSTIN Kilgore Saw ............................. 22 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Lignomat .................................

24 (C) 931-797-8029

Contact: JOE Universal Refiner ................... 23 Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 WoodMizer ................................ l (C) 801-362-2170

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net (C) 931-797-8029 800.S48.6914 I S73.663.7711

Excavator 330LX Link Belt Email: Austin@lumbermensco.com (C) 931-797-8029

460 Timberjack

- USED FORESTRY EQUIPMENT FOR SALE

❘

Email: Sam@lumbermensco.com (C) 615-596-4148

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

STACKING RAC Item ID: 47188

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Item ID: 78672

❘

 (888) 401-MENS L!

NO. 27

Phone

315.284.4126 PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM TO VIEW DESCRIPTION,

“Precision Under Pressure”

Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘93 Barko 180B Mack Truck

Item ID:Hood 14077Loader with Contact: Austin Item ID: 76831 Ph: (888) Contact: SAM401-6367 x703

Timberjack 460D

CAT D5H LGP

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: SAM Item ID: JW-909632 Email: Sam@lumbermensco.com Contact: J Williams Phone: 888-401-6367 EXT 702 (C) 615-596-4148 Ph: (888) 401-6367 x701

1979 Timberjack 230 Cable Skidder

Log Loader/ Excavator 225 LC Cable Skidder Item ID: 51519

CAT 140G

Item ID: 93592

CAT D4C LGP Forestry Dozer Tree Farmer

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: SAM Contact: Austin Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 Ph: (888) 401-6367 x703 (C) 615-596-4148

Item ID: 91657

Item ID: 51788

L O G G I N G

2009 2384 Prentice ‘16 HalversonLoader H140 Knuckleboom Item ID:(DEMO) 83019 Skidsteer

Item ID: 64808

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

Franklin Q80 Grapple Skidder

John Deere 1710D Forwarder

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Item ID: 55955

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

Prentice 210 E

Item ID: 94242

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

well built processor.

Item ID 13820.

2005 John Deere Sam2054 x702 Track Loader ID: 82959 FirewoodItem Processor - This is Contact: SAM

amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased

John Deere 2054 new for $32,500.

Item ID 13865.

Phone: 888-401-6367 EXT 703 Handles (C) logs up to 32”. Uses 931-797-8029

but electronic option is available.

50% or better. 475 hp Cummins

vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

John Deere 648 G Grapple Skidder w/Winch

Item ID 13644. Sam x702

FIREWOOD PROCESSORS Item ID: 54867 2010 Shop Built Wood Processor Contact: AUSTIN

- ItEmail: has a Austin@lumbermensco.com 353 Detroit diesel, 40 Phone: 888-401-6367 EXT 703 931-797-8029 inch insert(C)tooth circle saw, 30 foot

 Issue 364 429

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

648 E Cable Skidder

log deck. Has hydraulic Itema ID: 87791 grapple, chain and AUSTIN kicker that all runs off Contact:

Austin@lumbermensco.com ofEmail: a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 931-797-8029 unit. Has(C) a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

CAT5,000 D6M Dozer grapple, original hours.

Item ID: 71062 (excellent condition.). Item ID

on injection pump. always started

tach, oil pressure, water temp and

Phone: 888-401-6367 EXT 703 quality chips with patented ‘Cone’ (C) 931-797-8029

drum design. Can easily load 42’

capacity!. Item ID 13421. Sam x702

low hours. Control panel includes

with John Deere power unit with

Contact: AUSTIN Email: Austin@lumbermensco.com BANDIT Phone: 888-401-6367 EXT 703 1999 Bandit 1900 Tracked Disc (C) 931-797-8029

Email: Austin@lumbermensco.com made the best valued log splitter.

Item ID: 99373

Item ID: 13920

(C) 615-596-4148

Phone: 888-401-6367 702 automatice firewood EXT processor

Item ID: 98009 with 1700 hours, in very good Contact: AUSTIN

‘95 John Deere C6

Contact: SAM 13238. Sam@lumbermensco.com Chris x700 Email: Phone: 888-401-6367 EXTBuncher 702 1995 Barko 775 B Feller (C) 615-596-4148

aEmail: Chomper Model 16 PDA Sam@lumbermensco.com

Franklin 155B Log Forwarder Best Value Portable Splitter Item ID: 10700 - Small manufacturer in PA has Contact: AUSTIN

Email: Austin@lumbermensco.com condition.

Easily produces high

Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Shovel Loader Sam x702 Item ID: 47131

LOGGING EQUIPMENT

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine

- Pumps recently redone. 400 hrs

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with

Prentice approximately 1500 384 hours. Hour

Knuckleboom meter dont work. TheLoader last 2 owners Item ID: 36889 have only used it to load trucks or Contact: AUSTIN Email: Austin@lumbermensco.com as a backup as needed. Has a CTR Phone: 888-401-6367 EXT 703 delimber, has been rebuilt.

(C) grapple 931-797-8029

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam

Feller Buncher w/DS Ryan 28 Felling Head

848 G Grapple Skidder

x702

good condition.

Contact: AUSTINJust finished 10

1990 BellAUSTIN Super T - This Bell has Contact: Email: Austin@lumbermensco.com a brand new Duetz engine. Lever Phone: 888-401-6367 EXT 703 931-797-8029 control,(C) 33” bar, pump and tranny

with 850 HP. hrs. Mill in Item5300 ID: 85843

Email: Austin@lumbermensco.com Acre clearing job, ready to work!

Phone: 888-401-6367 EXT 703

931-797-8029 Remote (C) control.

Big production

 List  seLL  exchange  buy  save

❘

BELL Item ID: 76226

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS Timberjack 380CEXPO

CAT 527 Grapple Dozer

John Deere 540 G3Fri, 25 August Grapple - Sat, Skidder 26 August

Danckaert Band Resaw - Roughly CAT 518 Grapple Skidder

that Contact: SAM Started Email: Sam@lumbermensco.com it All! Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Contact: AUSTIN Contact: SAM www.arkloggers.com Email: Austin@lumbermensco.com Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 702 72ND ANNUAL GREAT LAKES (C) 931-797-8029 (C) 615-596-4148

Contact: SAM has been rebuilt, it has a 24foot in Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702deck feed deck 20 foot out feed (C) 615-596-4148

TheID: Tree Item 69600

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Item ID: 67273

ItemArkansas ID: 69901 Hot Springs,

LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

TF 830C

Selma, North Carolina www.midatlantic-logging-biomass­ 2001 Ponsse Ergo expo.com/

153ADVERTISING Fabtek Processor SALES

LOGGING & BIOMASS EXPO

Phone: 888-401-6367 EXT 702 MARKETING DIRECTOR (C) 615-596-4148

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 (C) 615-596-4148

MID-ATLANTIC

Item ID: 8077

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Send address changes to:

515 GrappleExchange Skidder Lumberman's

ItemBox ID:1916 8999 P.O. Contact: SAM TN 38402 Columbia,

Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 The Lumberman's Exchange is 615-596-4148 published(C) monthly

by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Hydro Ax 611E Exchange, its principles and Item 4654 associates, are notID: held liable for Contact: AUSTIN Reproduction, errors or omissions. inEmail: whole Austin@lumbermensco.com or part, is prohibited with­ Phone: 888-401-6367 EXT 703 out written consent.

(C) 931-797-8029 ©2017 Woods Publishing

Item ID: 7720

Contact: SAM KENTUCKY WOOD EXPO Email: Sam@lumbermensco.com Fri, 15 Sept Sat, 16 Sept Phone: 888-401-6367 EXT 702

Lexington, Kentucky (C) 615-596-4148 http://www.kfia.org/ KentuckyWoodExpo.aspx

it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This

Prentice 2210

is an extremely accurate machine Item ID: 7060 in ve1y good condition, Cuts 130 Contact: AUSTIN

Email: Austin@lumbermensco.com feet a minute also has CLT presses.

Phone: 888-401-6367 EXT 703 Item ID(C)13876.

Austin x703 931-797-8029

S & W 125 Band Mill with Caterpillar generator - Low hours

L O G G I N G

Donna Heninger

on the mill, electronic computer Set

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Phone: 888-401-6367 EXT 702 (C) 615-596-4148 MAILING ADDRESS

that go up and down, with airbags,

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Sam Wall Tigercat 604 (888) 401-6367 ext.

702 Cable Skidder sam@lumbermens.co Item ID: 6552 Austin Woods Contact: (888) SAM 401-6367 ext. 703 Email: Sam@lumbermensco.com austin@lumbermens.co

bells and whistles, its a production machine, with air strain conveyers

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

with 44 inch wheels, and all the

Escanaba, Michigan

PUBLISHER

Item ID: 8763 Morris Woods (888) SAM 401-6367 ext. 704 Contact: morris@lumbermens.co Email: Sam@lumbermensco.com

ID:machine 3577 since it 10 hoursItem on this

Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434.

John Deere 540B

Prentice 1190T Tracked Feller Buncher

Sam x702 Tigercat 604

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Contact: AUSTIN 2010 Cardinal HD Carriage Email: Austin@lumbermensco.com Carriages (Sawmill) - Cardinal Phone: 888-401-6367 EXT 703 (C) 931-797-8029

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) ........ 36

John Deere 753J 9 Morbark .....................................

Corley Mfg ..............................

32 Item ID: 6603

Tracked Cutter

Multitek ...................................

12 Item ID: 7407

John Deere 648D

Contact: AUSTIN

Piper's Saw Shop.................... 13 Email: Sam@lumbermensco.com

** INFO LINK** Item ID: 6089

John Deere 648E

CRD Metalworks .................... 25 Email: Austin@lumbermensco.com

Item ID: 7436 CARRIAGES & DRIVES

Item ID: 4677

Contact: SAM

Carriage line it includes carriage

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC Item ID: 16

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Phone: 888-401-6367 EXT 703 CW Mill-ArmorHog ..............

17

Phone: 888-401-6367 EXT 702 40 Rotochopper ............................

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron BullItem ...................................

21 ID: 1826

Union Grove Saw Knife.. 2, 37 Item ID: & 4894

John Deere 648G

1997 Timberjack 240C

Contact: Saw AUSTIN Kilgore ............................. 22

Contact: AUSTIN Universal Refiner ................... 23

Phone: 888-401-6367 EXT 703 Lignomat .................................

24

Phone: 888-401-6367 EXT 703 WoodMizer ................................ l

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net (C) 931-797-8029 800.S48.6914 I S73.663.7711

(C) 931-797-8029

Timberjack 450B

Email: Austin@lumbermensco.com

- USED FORESTRY EQUIPMENT FOR SALE

(C) 931-797-8029

❘

(C) 615-596-4148

Email: Austin@lumbermensco.com (C) 931-797-8029

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

Item ID: 100096

❘

 (888) 401-MENS L!

NO. 29

Phone

315.284.4126 PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM TO VIEW DESCRIPTION,

“Precision Under Pressure”

Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

2014 John Deere 640H

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Item ID: JW-909632 Email: Austin@lumbermensco.com Contact: J Williams Phone: 888-401-6367 EXT 703 Ph: (888) 401-6367 x701 (C) 931-797-8029

84’ John Deere 440C

84’ John Deere 540B

97’ John Deere 640G

‘95 John Deere C6 CATFarmer 518 Cable Tree

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Contact: Austin Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Ph: (888) 401-6367 x703 (C) 931-797-8029

Item ID: 100094

Item ID: 100091

Item ID: 100075

L O G G I N G

‘93 Barko 180B

John Deere 440C’s Package Deal

Item ID: 100074

‘16 79’ Halverson Timberjack H140 225D Item ID: 100087 Skidsteer (DEMO)

Item ID: 100070

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

John Deere 750K

John Deere 750J

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID: 100053

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

08’ JD 843J

Item ID: 100015

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

13’ John Deere 643K

well built processor. Item ID 13820.

SamJohn x702 Deere 650H ID: 99876 FirewoodItem Processor - This is Contact: AUSTIN

amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

07’ Timbco 445EXL

Sam x702 Item ID: 100104

Phone: 888-401-6367 EXT 703 Handles (C) logs up to 32”. Uses 931-797-8029

but electronic option is available.

50% or better. 475 hp Cummins

day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

96’ Cat 312 Track Buncher

FIREWOOD PROCESSORS Item ID: 100088

Contact: AUSTIN 2010 Shop Built Wood Processor

Email: Austin@lumbermensco.com

- ItPhone: has a 353 Detroit diesel, 40 888-401-6367 EXT 703

931-797-8029 inch insert(C)tooth circle saw, 30 foot

 Issue 364 429

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

‘05 JD 643H

log deck. Item Has aID: hydraulic 100072grapple, Contact: chain and JOE kicker that all runs off Email: Joe@lumbermensco.com

ofPhone: a 4 cylinder Mercedes 888-401-6367 EXTpower 709

801-362-2170 unit. Has(C) a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

John Deere grapple, 5,000 original650G hours.

Item ID: 99852 (excellent condition.). Item ID

on injection pump. always started

tach, oil pressure, water temp and

Phone: 888-401-6367 EXT 709 quality chips with patented ‘Cone’ (C) 801-362-2170

vans and produce 6 - 8 loads per

capacity!. Item ID 13421. Sam x702

low hours. Control panel includes

with John Deere power unit with

Contact: AUSTIN Email: Austin@lumbermensco.com BANDIT Phone: 888-401-6367 EXT 703 1999 Bandit 1900 Tracked Disc (C) 931-797-8029

drum design. Can easily load 42’

Item ID: 33681

Item ID: 13920

(C) 931-797-8029

Phone: 888-401-6367 703 automatice firewood EXT processor

Item ID: 100122 with 1700 hours, in very good Contact: JOE

Email: Austin@lumbermensco.com made the best valued log splitter.

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN 13238. Austin@lumbermensco.com Chris x700 Email: Phone: 888-401-6367 EXTBuncher 703 1995 Barko 775 B Feller (C) 931-797-8029

aEmail: Chomper Model 16 PDA Austin@lumbermensco.com

Best Value Portable Log Splitter Item ID: 100115 - Small manufacturer in PA has Contact: AUSTIN

Email: Joe@lumbermensco.com condition.

Easily produces high

Item ID: 14077 97’ Timberjack 240C Contact: ItemAustin ID: 100076 Ph: (888) 401-6367 x703 Contact: AUSTIN

LOGGING EQUIPMENT

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine

Timbco 425C

with 850 Item HP. 5300 hrs. Mill in ID: 100028

Contact: AUSTINJust finished 10 good condition.

Email: Austin@lumbermensco.com

Acre clearing job, ready work!

Phone: 888-401-6367 EXTto 703 931-797-8029 Remote (C) control.

Big production

 List  seLL  exchange  buy  save

- Pumps recently redone. 400 hrs

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

15’ Tigercat 724G

meter dont work. The last 2 owners Item ID: 100101 have only used it to load trucks or Contact: AUSTIN Email: Austin@lumbermensco.com as a backup as needed. Has a CTR Phone: 888-401-6367 EXT 703 delimber, has been rebuilt.

(C) grapple 931-797-8029

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

CAT 563C

BELL Item ID: 99970 Contact: 1990 BellAUSTIN Super T - This Bell has

Email: Austin@lumbermensco.com a brand888-401-6367 new Duetz engine.

Phone: EXT 703Lever 931-797-8029 control,(C) 33” bar, pump and tranny

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

John Deere 753J Fri, 25 August 14’ Tigercat 720E - Sat, 26 August

that Started Contact: AUSTIN Email: Austin@lumbermensco.com it All! Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Contact: AUSTIN www.arkloggers.com Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 72ND ANNUAL GREAT LAKES (C) 931-797-8029 (C) 931-797-8029

TheID: Tree Item 99934

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Item ID: 99917

ItemArkansas ID: 99916 Hot Springs,

LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Phone: 888-401-6367 EXT 703 MARKETING DIRECTOR (C) 931-797-8029

Contact: AUSTIN Contact: AUSTIN KENTUCKY WOOD EXPO Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Fri, 15 Sept Sat, 16 Sept Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 Lexington, Kentucky (C) 931-797-8029 (C) 931-797-8029

Item ID: 99897

Donna Heninger

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Send address changes to: Hydro AX 411 Lumberman's Exchange Item ID: 98954 P.O. Box 1916 Contact: AUSTINTN 38402 Columbia,

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 The Lumberman's Exchange is (C) 931-797-8029 published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Franklin 132 Exchange, Item its principles and ID: 100093 associates, are not held liable for Contact: AUSTIN Reproduction, errors or omissions. inEmail: whole Austin@lumbermensco.com or part, is prohibited with­ Phone: 888-401-6367 EXT 703 out written consent.

(C) 931-797-8029 ©2017 Woods Publishing

bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This

John Deere 643K

is an extremely accurate machine Item ID: 99866 in ve1y good condition, Cuts 130 Contact: AUSTIN

Email: Austin@lumbermensco.com feet a minute also has CLT presses.

Phone: 888-401-6367 EXT 703 Item ID(C)13876.

Austin x703 931-797-8029

S & W 125 Band Mill with Caterpillar generator - Low hours

on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

EQUIPMENT REPS

(C) 931-797-8029 MAILING ADDRESS

Item ID: 99879

http://www.kfia.org/ KentuckyWoodExpo.aspx

DESIGN DIRECTOR Sam Wall (888) 401-6367 ext. 702 Bell Ultra T sam@lumbermens.co Item ID: 99865 Austin Woods Contact: AUSTIN (888) 401-6367 ext. 703 Email: Austin@lumbermensco.com austin@lumbermens.co Phone: 888-401-6367 EXT 703

with 44 inch wheels, and all the

Hydro AX 721E

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

Cat 3406 140KW Genset, 12,400

CAT 573

SamJohn x702 Deere 848L Item ID: 83128 CARRIAGES & DRIVES

** INFO LINK**

L O G G I N G

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Contact: AUSTIN has been rebuilt, it has a 24foot in Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703deck feed deck 20 foot out feed (C) 931-797-8029

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

John DeereSALES 753J ADVERTISING

Item ID: 99902 Morris Woods (888) AUSTIN 401-6367 ext. 704 Contact: morris@lumbermens.co Email: Austin@lumbermensco.com

Danckaert Band Resaw - Roughly John Deere 643K ID: machine 99905 since it 10 hoursItem on this

Escanaba, Michigan

Selma, North Carolina www.midatlantic-logging-biomass­ MID-ATLANTIC John Deeere John Deere 843J expo.com/ LOGGING & BIOMASS EXPO 643G

Woods Publishing

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO

98’ Timbco 445B

hours ready to run. Item ID 13434.

Item ID: 99826

Item ID: 59580

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) ........ 36

Timbco 425D

Morbark ..................................... 9

Item..............................

ID: 98053 Corley Mfg 32

Item ID: 2594 Multitek ...................................

12

Timberjack 610

Contact: AUSTIN CRD .................... 25 Email:Metalworks Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 CW Mill-ArmorHog .............. 17 (C) 931-797-8029

Contact: AUSTIN Piper's Saw Shop.................... 13 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Rotochopper............................ 40 (C) 931-797-8029

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Item ID: 100022 Iron Bull ...................................

21

ItemSaw ID: 99837 Union Grove & Knife.. 2, 37

Valmet 644

Valmet 840.4

Contact: AUSTIN Kilgore Saw ............................. 22 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Lignomat ................................. 24 (C) 931-797-8029

Contact: AUSTIN Universal Refiner ................... 23 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 WoodMizer ................................ l (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net (C) 931-797-8029 800.S48.6914 I S73.663.7711

John Deere 1010D

- USED FORESTRY EQUIPMENT FOR SALE

❘

Contact: AUSTIN 2010 Cardinal HD Carriage Email: Austin@lumbermensco.com Carriages (Sawmill)EXT - Cardinal Phone: 888-401-6367 703 (C) 931-797-8029

Carriage line it includes carriage

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

CAT 563C

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

Item ID: 100095

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID: 79249

❘

 (888) 401-MENS L!

NO. 31

Phone

315.284.4126 PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM TO VIEW DESCRIPTION,

“Precision Under Pressure”

Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Timberking 458

Valmet 840.2 Forwarder

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

13’ CAT 545C

(for parts or fixing) Item ID: 100112

Item ID: 171

Item ID: 9770

TJ 450

Item ID: 100123

L O G G I N G

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

‘16 Halverson H140 07’ JD 748G III Item ID: 100127 Skidsteer (DEMO)

Contact: JOE Item ID: JW-909632 Email: Joe@lumbermensco.com Contact: J Williams Phone: 888-401-6367 EXT 709 (C) 801-362-2170 Ph: (888) 401-6367 x701

2009 CAT 545C Item ID: 100109

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

14’ John Deere 748H

15’ Cat 545D

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) JW-986495 931-797-8029 Item ID:

Item ID: 100099

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

10’ John Deere 648H

Item ID: 100098

‘05 Gehl CTL 70

Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Item ID: 100064 with 1700 hours, in very good

JohnPortable Deere Best Value Log648H Splitter Item ID: 100051 - Small manufacturer in PA has

drum design. Can easily load 42’

13HP Honda motor. Manual start

Contact: AUSTIN Email: Austin@lumbermensco.com condition.

Easily produces high Phone: 888-401-6367 EXT 703 quality chips with patented ‘Cone’ (C) 931-797-8029

vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

Tigercat 610C FIREWOOD PROCESSORS Item ID: 100046

2010 Shop Built Wood Processor Contact: AUSTIN

- ItEmail: has a Austin@lumbermensco.com 353 Detroit diesel, 40 Phone: 888-401-6367 EXT 703

inch insert(C)tooth circle saw, 30 foot 931-797-8029  Issue 364 429

well built processor. Item ID 13820.

Sam x702 CTR 950 ID: 100097 FirewoodItem Processor - This is Contact: AUSTIN

‘93 Barko 180B

Item ID: 83’14077 TJ 380A Contact: ItemAustin ID: 100126 Ph: (888) Contact: JOE401-6367 x703 Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

‘95 John Deere C6

98’ Timberjack Tree Farmer 460C Item ID: 100106

Item ID: 13920

Contact: AUSTIN Contact: Austin Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Ph: (888) 401-6367 x703 (C) 931-797-8029

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 06’5,000 JD original 648G hours.

III Item ID: 100077 (excellent condition.).

Item ID

(C) 931-797-8029

Contact: JOE 13238. Chris x700 Email: Joe@lumbermensco.com Phone: 888-401-6367 EXTBuncher 709 1995 Barko 775 B Feller (C) 801-362-2170

low hours. Control panel includes

on injection pump. always started

aEmail: Chomper Model 16 PDA Austin@lumbermensco.com Phone: 888-401-6367 703 automatice firewood EXT processor

with John Deere power unit with

tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

- Pumps recently redone. 400 hrs

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

Timberjack 460 Sam x702 Item ID: 100049

Timberjack 240A meter dont work.

The Grapple last 2 owners

Contact: AUSTIN Email: Austin@lumbermensco.com made the best valued log splitter.

Phone: 888-401-6367 EXT 703 Handles (C) logs up to 32”. Uses 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com BANDIT Phone: 888-401-6367 EXT 703 1999 Bandit 1900 Tracked Disc (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com as a backup as needed. Has a CTR Phone: 888-401-6367 EXT 703 delimber, grapple has been rebuilt.

(C) 931-797-8029

but electronic option is available.

50% or better. 475 hp Cummins

Item ID 13694. Sam x702

Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

CAT 515

log deck. Has hydraulic grapple, ItemaID:100029 chain and AUSTIN kicker that all runs off Contact:

Austin@lumbermensco.com ofEmail: a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703

unit. Has(C) a 4’ chain saw that kicks 931-797-8029

Lumbermens™  since 1986

❘

LOGGING EQUIPMENT

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine

Timberjack 450C

with 850 Item HP. 5300 hrs. Mill in ID: 100026

good condition.

Contact: AUSTINJust finished 10

Email: Austin@lumbermensco.com Acre clearing job, ready to work!

Phone: 888-401-6367 EXT 703

Remote (C) control.

Big production 931-797-8029

 List  seLL  exchange  buy  save

Item ID: 100048 have only used it to load trucks or

Boom cylinders have minor leaks.

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

John Deere 548G2 BELL Item ID: 99972

1990 BellAUSTIN Super T - This Bell has Contact: Email: Austin@lumbermensco.com a brand new Duetz engine. Lever Phone: 888-401-6367 EXT 703 control,(C) 33” bar, pump and tranny 931-797-8029 ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

John Deere 848H Fri, 25 August Tigercat - Sat, 26610E August

that Started Contact: AUSTIN Email: Austin@lumbermensco.com it All! Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Contact: AUSTIN www.arkloggers.com Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 72ND ANNUAL GREAT LAKES (C) 931-797-8029 (C) 931-797-8029

TheID: Tree Item 99967

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Item ID: 99963

ItemArkansas ID: 99935 Hot Springs,

LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Phone: 888-401-6367 EXT 703 MARKETING DIRECTOR (C) 931-797-8029

Contact: AUSTIN Contact: AUSTIN KENTUCKY WOOD EXPO Email: Austin@lumbermensco.com Fri, 15 Email: Austin@lumbermensco.com Sept - Sat, 16 Sept Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 Lexington, Kentucky (C) 931-797-8029 (C) 931-797-8029

Item ID: 99894

Donna Heninger

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Send address changes to:

11’ John Deere 648H Lumberman's Exchange

ItemBox ID: 74017 P.O. 1916 Contact: AUSTINTN 38402 Columbia,

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 The Lumberman's Exchange is 931-797-8029 published(C) monthly

by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Komatsu Exchange, its principles931.1 and Item 99949 associates, are notID: held liable for Contact: AUSTIN Reproduction, errors or omissions. inEmail: whole Austin@lumbermensco.com or part, is prohibited with­ Phone: 888-401-6367 EXT 703 out written consent.

(C)©2017 931-797-8029 Woods Publishing

bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

Timberjack is supported on both 240C sides. This

Grapple is an extremely w/Winch accurate machine Item ID: 99861 in ve1y good condition, Cuts 130 Contact: AUSTIN

Email: Austin@lumbermensco.com feet a minute also has CLT presses.

Phone: 888-401-6367 EXT 703 Item ID(C)13876.

Austin x703 931-797-8029

S & W 125 Band Mill with

Caterpillar generator - Low hours

on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 MAILING ADDRESS

Item ID: 99889

http://www.kfia.org/ KentuckyWoodExpo.aspx

DESIGN DIRECTOR Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co CAT 515 Item ID: 99856 Austin Woods Contact: (888) AUSTIN 401-6367 ext. 703 Email: Austin@lumbermensco.com austin@lumbermens.co

with 44 inch wheels, and all the

2011 CAT 525C

Timberjack 240

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

** INFO LINK** Item ID: 99835

L O G G I N G

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Contact: AUSTIN has been rebuilt, it has a 24foot in Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703deck feed deck 20 foot out feed (C) 931-797-8029

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

ADVERTISING SALES Clark 666C

Morris Woods Item ID: 99903 (888) AUSTIN 401-6367 ext. 704 Contact: morris@lumbermens.co Email: Austin@lumbermensco.com

Danckaert Band Resaw - Roughly John Deere 748H ID: machine 99920 since it 10 hoursItem on this

Escanaba, Michigan

Selma, North Carolina www.midatlantic-logging-biomass­ MID-ATLANTIC John Deere Timberjack 450C expo.com/ LOGGING & BIOMASS EXPO 648E

Woods Publishing

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO

John Deere 748G3

Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434.

Sam x702 Timberjack 380A

CARRIAGES & DRIVES Item ID: 79616

Item ID: 99828

Contact: AUSTIN 2010 Cardinal HD Carriage Email: Austin@lumbermensco.com Carriages (Sawmill) - Cardinal Phone: 888-401-6367 EXT 703 (C) 931-797-8029 Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg 32 Item..............................

ID: 84473

MultitekItem ...................................

12 ID: 100108

08 Rottne H14

Contact: AUSTIN .................... 25 CRD Metalworks

Contact: AUSTIN Piper's Saw Shop.................... 13

Phone: 888-401-6367 EXT 703 CW Mill-ArmorHog ..............

17

Phone: 888-401-6367 EXT 703 40 Rotochopper ............................

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron BullItem ...................................

21 ID: 99923

Union Grove & Knife.. 2, 37 ItemSaw ID: 99919

Volvo Delimber

Timbco 425 EXL

Contact: Saw AUSTIN Kilgore ............................. 22

Contact: AUSTIN Universal Refiner ................... 23

Phone: 888-401-6367 EXT 703 Lignomat .................................

24

Phone: 888-401-6367 EXT 703 WoodMizer ................................ l

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net (C) 931-797-8029 800.S48.6914 I S73.663.7711

Tigercat 630E

Email: Austin@lumbermensco.com (C) 931-797-8029

08’ Timbco 415EX

Email: Austin@lumbermensco.com

- USED FORESTRY EQUIPMENT FOR SALE

(C) 931-797-8029

❘

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

2004 Timbco 425EXL

Email: Austin@lumbermensco.com (C) 931-797-8029

Email: Austin@lumbermensco.com (C) 931-797-8029

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

STACKING RAC Item ID: 100107

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID: 99855

❘

 (888) 401-MENS L!

NO. 33

Phone

315.284.4126 PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM TO VIEW DESCRIPTION,

“Precision Under Pressure”

Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Timbco 420

John Deere 1270

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Item ID: JW-909632 Email: Austin@lumbermensco.com Contact: J Williams Phone: 888-401-6367 EXT 703 (C) 931-797-8029 Ph: (888) 401-6367 x701

13’ Tigrcat 234B

06’ JD 437C

Barko 595ML & CSI 4400 Saw

Item ID: 99833

Item ID: 34512

Item ID: 100100

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

L O G G I N G

‘16 Halverson H140 Prentice 2190 Item ID: 28889 Skidsteer (DEMO)

Item ID:100078

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Item ID: 100060

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

Prentice 310E

Tigercat 234

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID: 100044

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

Prentice 210C

Item ID: 100014

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Prentice 180D

well built processor. Item ID 13820.

Hood 24000 Sam x702 Item ID: 100013 Firewood Processor - This is Contact: CJ

amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

CAT D6k2

Sam x702 Item ID: 99839

Phone: 888-401-6367 EXT 703 Handles (C) logs up to 32”. Uses 931-797-8029

but electronic option is available.

50% or better. 475 hp Cummins

day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

JD Dozer 550J FIREWOOD PROCESSORS Item ID: 67779

2010 Shop Built Wood Processor Contact: AUSTIN

- ItEmail: has a Austin@lumbermensco.com 353 Detroit diesel, 40 Phone: 888-401-6367 EXT 703

inch insert(C)tooth circle saw, 30 foot 931-797-8029  Issue 364 429

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Morbark Model homemade processor with a 20 10’ Chipharvester

log deck. Has hydraulic Itema ID: 38035 grapple, chain and SAM kicker that all runs off Contact: Sam@lumbermensco.com ofEmail: a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 702

unit. Has(C) a 4’ chain saw that kicks 615-596-4148

Lumbermens™  since 1986

❘

Item ID: 13920 Contact: AUSTIN Contact: Austin Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Ph: (888) 401-6367 x703 (C) 931-797-8029 capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Prentice grapple, 5,000180E originalLoader hours.

Item ID: 99822 (excellent condition.). Item ID

on injection pump. always started

tach, oil pressure, water temp and

Phone: 888-401-6367 EXT 703 quality chips with patented ‘Cone’ (C) 931-797-8029

vans and produce 6 - 8 loads per

‘95 John Deere C6 Tigercat 250 Tree Farmer Item ID: 100058

low hours. Control panel includes

with John Deere power unit with

Contact: AUSTIN Email: Austin@lumbermensco.com BANDIT Phone: 888-401-6367 EXT 703 1999 Bandit 1900 Tracked Disc (C) 931-797-8029

drum design. Can easily load 42’

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

(C) 888-401-6367

Phone: 888-401-6367 701 automatice firewood EXT processor

Item ID: 81471 with 1700 hours, in very good Contact: AUSTIN

Email: Austin@lumbermensco.com made the best valued log splitter.

Item Ecolog ID: 14077590D Contact: Austin Item ID: 874 Ph: (888) 401-6367 x703 Contact: AUSTIN

Contact: AUSTIN 13238. Austin@lumbermensco.com Chris x700 Email: Phone: 888-401-6367 EXTBuncher 703 1995 Barko 775 B Feller (C) 931-797-8029

aEmail: Chomper Model 16 PDA CJ@lumbermensco.com

Best Value Portable Log Splitter Item ID: 7822 - Small manufacturer in PA has Contact: AUSTIN

Email: Austin@lumbermensco.com condition.

Easily produces high

‘93 Barko 180B

LOGGING EQUIPMENT

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine

Morbark 30XL

with 850 HP. hrs. Mill in Item5300 ID: 13937

good condition.

Contact: SAM Just finished 10

Email: Sam@lumbermensco.com Acre clearing job, ready to work!

Phone: 888-401-6367 EXT 702

Remote (C) control.

Big production 615-596-4148

 List  seLL  exchange  buy  save

- Pumps recently redone. 400 hrs

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

Komatsu D39PX-22

meter dont work. The last 2 owners Item ID: 99830 have only used it to load trucks or Contact: AUSTIN Email: Austin@lumbermensco.com as a backup as needed. Has a CTR Phone: 888-401-6367 EXT 703 delimber, has been rebuilt.

(C) grapple 931-797-8029

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

CAT 517 Grapple Dozer BELL Item ID: 70690

1990 BellSAM Super T - This Bell has Contact: Email: Sam@lumbermensco.com a brand new Duetz engine. Lever Phone: 888-401-6367 EXT 702 control,(C) 33” bar, pump and tranny 615-596-4148 ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

S&W 125 High Production

SOUTHWEST FOREST PRODUCTS EXPO 15’ Salsco Slab Chipper SC-6 Cooper Scragg Mill Fri, 25 August - Sat, 26 August

that Started Contact: AUSTIN Email: Austin@lumbermensco.com it All! Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: JOE Contact: JOE www.arkloggers.com Email: Joe@lumbermensco.com Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 Phone: 888-401-6367 EXT 709 72ND ANNUAL GREAT LAKES (C) 801-362-2170 (C) 801-362-2170

The Tree Item ID: 8019

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Item ID: 100128

ItemArkansas ID: 100113 Hot Springs,

LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Phone: 888-401-6367 EXT 703 MARKETING DIRECTOR (C) 931-797-8029

Contact: AUSTIN Contact: SAM KENTUCKY WOOD EXPO Email: Austin@lumbermensco.com Fri, 15 Email: Sam@lumbermensco.com Sept - Sat, 16 Sept Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 702 Lexington, Kentucky (C) 931-797-8029 (C) 615-596-4148

Item ID: 99883

Donna Heninger

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Go Fast Send address changes to: Run AroundExchange System Lumberman's ItemBox ID: 84282 P.O. 1916 Contact: AUSTINTN 38402 Columbia,

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 The Lumberman's Exchange is 931-797-8029 published(C) monthly

by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's 4 Head Trim Saw Exchange, its principles and Item 1559 associates, are notID: held liable for errors or omissions.

Contact: AUSTIN Reproduction, inEmail: whole Austin@lumbermensco.com or part, is prohibited with­ out written consent.

Phone: 888-401-6367 EXT 703 (C)©2017 931-797-8029 Woods Publishing

that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This

Cornellaccurate Sizermachine is an extremely Item ID: 48105 in ve1y good condition, Cuts 130 Contact: SAM

Email: Sam@lumbermensco.com feet a minute also has CLT presses.

Phone: 888-401-6367 EXT 702 Item ID(C)13876.

Austin x703 615-596-4148

S & W 125 Band Mill with

Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 MAILING ADDRESS

Item ID: 38894

http://www.kfia.org/ KentuckyWoodExpo.aspx

DESIGN DIRECTOR Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Pendu Cut Off Saw Item ID: 10632 Austin Woods Contact: (888) AUSTIN 401-6367 ext. 703 Email: Austin@lumbermensco.com austin@lumbermens.co

bells and whistles, its a production machine, with air strain conveyers

Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434.

Fence Post Processing

Baker Notcher

Sam x702 Morbark Stac Trac

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Contact: AUSTIN 2010 Cardinal HD Carriage Email: Austin@lumbermensco.com Carriages (Sawmill) - Cardinal Phone: 888-401-6367 EXT 703 (C) 931-797-8029 Carriage line it includes carriage

** INFO LINK** Item ID: 42175

S A W M I L L

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

with 44 inch wheels, and all the

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

ADVERTISING SALES Morbark PS8 Post Peeler Morris Item ID:Woods 100055 (888) AUSTIN 401-6367 ext. 704 Contact: morris@lumbermens.co Email: Austin@lumbermensco.com

Contact: AUSTIN has been rebuilt, it has a 24foot in Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703deck feed deck 20 foot out feed (C) 931-797-8029

Escanaba, Michigan

Selma, North Carolina www.midatlantic-logging-biomass­ MID-ATLANTIC Edmiston Bush Chip Pak expo.com/ LOGGING & BIOMASSComplete EXPO

Woods Publishing

BANDMILLS & HEADSAWS Woodmizer Smart

Danckaert Band Resaw - Roughly Log Processing Item ID: 100089 10 hours on this machine since it

CARRIAGES & DRIVES Item ID: 64060

Item ID: 49307

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg 32 Item..............................

ID: 41602

Multitek ...................................

12 Item ID: 45665

Contact: AUSTIN .................... 25 CRD Metalworks

Contact: AUSTIN Piper's Saw Shop.................... 13

Phone: 888-401-6367 EXT 703 CW Mill-ArmorHog ..............

17

Phone: 888-401-6367 EXT 703 40 Rotochopper ............................

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Whole Tree Chipper

Email: Austin@lumbermensco.com (C) 931-797-8029

66” .............................

ReBuilt Hurst Boiler 14 Precision Chipper

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

Portable Sawmill

Email: Austin@lumbermensco.com (C) 931-797-8029

Baker 2 Head Resaw

STACKING RAC Item ID: 6828

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Thomas Industrial Controls..... 10

Iron BullItem ...................................

21 ID: 4524

Union Grove Saw Knife.. 2, 37 Item ID: & 4849

4” Morgan Resaw

Meadows #2

Contact: Saw AUSTIN Kilgore ............................. 22

Contact: AUSTIN Universal Refiner ................... 23

Lignomat .................................

24 Phone: 888-401-6367 EXT 703

WoodMizer ................................ l Phone: 888-401-6367 EXT 703

Contact: AUSTIN Email: Austin@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 703 800.S48.6914 I S73.663.7711 (C) 931-797-8029

Email: Austin@lumbermensco.com

- USED FORESTRY EQUIPMENT FOR SALE

(C) 931-797-8029

❘

Email: Austin@lumbermensco.com (C) 931-797-8029

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

Item ID: 9960

❘

 (888) 401-MENS L!

NO. 35

Phone

315.284.4126 PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM TO VIEW DESCRIPTION,

“Precision Under Pressure”

Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Precision Husky Chipper

Bandit Grinder - Chipper

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Item ID: JW-909632 Email: Austin@lumbermensco.com Contact: J Williams Phone: 888-401-6367 EXT 703 (C) 931-797-8029 Ph: (888) 401-6367 x701

Tajfun 480 Plus Joy

2014 Morbark M20R Forestry Track Chipper

2018 Diamond Z Track Mounted Horizontal Grinder

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID: 100115

Item ID: 7120

M I S C E L L A N E O U S

‘16 Halverson H140 Dynamic Horizontal Grinder Item ID:(DEMO) 5011 Skidsteer

Item ID: 72593

Item ID: 46375

Item ID: 373

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

2008 Cat Skid Steer 289C

CAT 527 Grapple Dozer

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Item ID: 60484

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

Morbark 30/60 Chipper

Item ID: 39840

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Morbark 6036 Chipper

well built processor. Item ID 13820.

H240 John Deere Tractor Sam x702 ID: 4808 Firewood Item Processor - This is

amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

CAT 232D Skid Loader

Sam x702 Item ID: 39708

Phone: 888-401-6367 EXT 702 Handles (C) logs up to 32”. Uses 615-596-4148

but electronic option is available.

50% or better. 475 hp Cummins

day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item IDVermeer 13644. Sam HG6000 x702

Horizontal Grinder

FIREWOOD PROCESSORS Item ID: 96128

2010 Shop Built Contact: SAM Wood Processor

- ItEmail: has a Sam@lumbermensco.com 353 Detroit diesel, 40 Phone: 888-401-6367 EXT 702

inch insert(C)tooth circle saw, 30 foot 615-596-4148  Issue 364 429

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

John Deere 700J Dozer

log deck. Has hydraulic Itema ID: 54715 grapple, chain and SAM kicker that all runs off Contact: Sam@lumbermensco.com ofEmail: a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 702

unit. Has(C) a 4’ chain saw that kicks 615-596-4148

Lumbermens™  since 1986

❘

Item ID: 73486

Item ID: 13920

Contact: AUSTIN Contact: Austin Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Ph: (888) 401-6367 x703 (C) 931-797-8029

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Ford Bucket / Boom Truck grapple, 5,000 original hours.

ID: 80919 (excellentItem condition.).

Item ID

on injection pump. always started

tach, oil pressure, water temp and

Phone: 888-401-6367 EXT 703 quality chips with patented ‘Cone’ (C) 931-797-8029

vans and produce 6 - 8 loads per

‘95 John Deere C6

2008 CatFarmer Skid Steer 289C Tree

low hours. Control panel includes

with John Deere power unit with

LOGGING Contact: SAM EQUIPMENT Email: Sam@lumbermensco.com BANDIT Phone: 888-401-6367 EXT 702 1999 Bandit 1900 Tracked Disc (C) 615-596-4148

drum design. Can easily load 42’

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN 13238. Austin@lumbermensco.com Chris x700 Email: Phone: 888-401-6367 EXTBuncher 703 1995 Barko 775 B Feller (C) 931-797-8029

Item ID: 16264 with 1700 hours, in very good Contact: AUSTIN

Email: Sam@lumbermensco.com made the best valued log splitter.

Item ID: 14077 Tajfun 400 Joy Contact: Austin Item ID: 99312 Ph: (888) 401-6367 x703 Contact: AUSTIN

Contact: AUSTIN aEmail: Chomper Model 16 PDA Austin@lumbermensco.com Phone: 888-401-6367 703 automatice firewood EXT processor (C) 931-797-8029

Best Value Portable Log Splitter Item ID: 75143 - Small manufacturer in PA has Contact: SAM

Email: Austin@lumbermensco.com condition.

Easily produces high

‘93 Barko 180B

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine

CAT 318CL

with 850 HP. hrs. Mill in Item5300 ID: 97884

good condition.

Contact: AUSTINJust finished 10

Email: Austin@lumbermensco.com Acre clearing job, ready to work!

Phone: 888-401-6367 EXT 703

Remote (C) control.

Big production 931-797-8029

 List  seLL  exchange  buy  save

- Pumps recently redone. 400 hrs

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

John Deere 85D

meter dont work. The last 2 owners Item ID: 48169 have onlyAUSTIN used it to load trucks or Contact: Email: Austin@lumbermensco.com as a backup as needed. Has a CTR Phone: 888-401-6367 EXT 703 delimber, has been rebuilt.

(C) grapple 931-797-8029

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

John Deere 700J LGP BELL Item ID: 4747

1990 BellAUSTIN Super T - This Bell has Contact: Email: Austin@lumbermensco.com a brand new Duetz engine. Lever Phone: 888-401-6367 EXT 703 control,(C) 33” bar, pump and tranny 931-797-8029 ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 37

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

AD DIRECTORY

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 429

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

Air Systems Mfg. ...........................7 .................................. 828-757-3500 Anson ...............................................15 ............................... 800-663-7723 B & B Mfg. ......................................16 ............................... 716-373-5881 B. H. Payne .....................................23 ............................... 800-752-0627 ‘93 Barko 180B Brewer Machine & Parts .............1 .................................. 800-345-6516 ‘16 Halverson H140 Item ID: 14077 Buck Equipment (AIM) .................19 ...............................

800-803-3365 Contact: Austin Skidsteer (DEMO) Cord King ........................................4 ..............................888-219-WOOD Ph: (888) 401-6367 x703 Item ID: JW-909632 Corley Mfg ......................................17 ............................... 423-698-0284 Contact: J Williams CW ...........................................8, 10, 39 .................... 800-743-3491 Ph:Mill (888) 401-6367 x701 F&R Mfg. .........................................20 ............................... 800-355-1250 GoFast Manufacturing .................22 ............................... 800-854-7439 Great Lakes Mfg. ...........................22 ............................... 877-248-5677 Holtec ..............................................3 ................................... holtecusa.com Hurdle Machine Works Inc .........40 ............................... 901-877-6251 Hurst Boiler. ...................................18 ............................... 877-774-8778 ‘95 John Deere C6 James G. Murphy Auction Co.....11 ...............................

425-486-1246 Kilgore Saw Company ..................21 ...............................

888-857-5153 Tree Farmer Lignomat .........................................19 ...............................

800-227-2105 Item ID: 13920 Contact: Austin Lumbermens 931-797-8029 ‘13 KMCWanted 2500...................37 Track ...............................

Ph: (888) 401-6367 x703 Lumbermens Web Store ..............25 ..............www.lumbermenco.com Skidder Menominee Saw............................23 ............................... 800-582-0470 Item ID: 14078 Messersmith Manufacturing, Inc. ..12 ............................... 906-466-9010 Contact: Austin capacity!. Item ID541-345-7454 13421. Sam x702 Metal Detectors, Inc.....................21 ...............................

Ph: (888) 401-6367 x703 BARKO Midwest Sharpening ...................21 ............................... 231-924-5953 1994 Barko 160B -607-589-6160 Electric Northeast Implements, Inc..........24 ............................... off onto aAutomati conveyor.on, This is ............38 a very knuckleboom, 30'800-211-9468 boom, 75hp Pantron Inc. ............................... well builtTrailers processor.

Item ID 13820. .................................. motor, Rotobec continuous Pinnacle Sales ..................9 800-513-9373 Sam x702 grapple, 5,000 original hours.

Piper’s Saw Shop..................... ......8 ..................................

800-845-6075 Row Electric....................................21 ...............................

800-248-4479 Firewood Processor - This is (excellent condition.). Item ID Ryan's Equipment ..........................10 ............................... a Chomper Model 16 PDA 13238. Chris x700989-427-2829 Smith Machine Worxprocessor ....................13 ............................... automatice firewood 1995 Barko 775 B 205-620-4455 Feller Buncher Smith Sawmill with John DeereService power ..................2 unit with ..................................

- Pumps recently 800-598-6344 redone. 400 hrs Tough Seats ....................................6 ..................................

855-579-0538 low hours. Control panel includes on injection pump. always started Woodlandia ....................................14 ...............................

877-508-8777 tach, oil pressure, water temp and good. in good working order. 22in PLEASE PRINT amp gauges.

Cuts logs up to 16”.

2023 kohing head.NOVEMBER head works great.

you to Change your Address One If owner andneed comes with all Item ID 13185.

Sam x702 or

Addand Your Name to our1999 mailing list, manuals receipts.

Purchased Barko 160D - newthen engine with please complete this form and mail to:

new for $32,500. Item ID 13865.

Sam x702

approximately 1500 hours. Hour

Lumbermens™meter Magazine dont work. The last 2 owners 1116 W 7th St., Ste. 297 LOGGING EQUIPMENT have only used it to load trucks or Columbia, TN 38402

Handles logs up to 32”. Uses

BANDIT as a backup as needed. Has a CTR ❑ Please Add ❑ Please Change ❑ grapple Pleasehas Remove 1999 Bandit 1900 Tracked Disc delimber, been rebuilt.

but electronic option is available.

50% or better. 475 hp Cummins Item ID 13694. Sam x702 Company Name*: ________________________________________________________

made the best valued log splitter.

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under at required Boom have minor leaks. *Company nameCarriage and address to cylinders process your change.

Diesel. 7500 Hours. One owner.

94 Barko 275 - Excellent value

Individual Name: _________________________________________________________

Well maintained. Item ID 13294.

with low at hours at 3,500. 5.9

Address:________________________________________________________________

Sam x702

CUMMINS continuous grapple.

_______________________________________________________________________

2004 Bandit Beast Model 4680 -

Runs Great!. Item ID 13740. Sam

City: ___________________________________________________________________ 3412 Caterpillar Diesel engine x702 State: __________________________________________________________________ with 850 HP. 5300 hrs. Mill in BELL Zip:____________________________________________________________________ good condition. Just finished 10 1990 Bell Super T - This Bell has

Acre clearing job, ready to work! a brand new Duetz engine. Lever Phone: _________________________________________________________________

Remote control. Big production control, 33” bar, pump and tranny Email:__________________________________________________________________

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 39

LUMBERMENS™ MAGAZINE 1116 West 7th Street, Suite 297 Columbia, Tennessee 38401