Lumbermens September 2024 Magazine

F R E E

C L A S S I F I E D

L I S T I N G S

-

P G

6

SEPTEMBER 2024 TM

pg.25>>

Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

P

IL L.S H

O

LIVI N

‘93 Barko 180B

Item ID: 14077 E WOO TH D Austin Contact: G Ph: (888) 401-6367 x703 SA

WM

P

TURBOSAWMILLS ARE IN STOCK

WM

FE! LI

‘16 Halverson H140 Skidsteer (DEMO)

SA

E WOO TH D

LIVI N

TURBOSAWMILLS ARE IN STOCK

G

FE! LI

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

IL L.S H

O

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

‘83 John Deere 4850

M10-28A: $29,900

chain conveyer, 8 way splitter, on

M10-28A - 4 In Stock

Item ID: 14073 20,000lb goose neck trailer. Item ID Contact: Austin Austin x703 Ph: 401-6367 x703 • (888) Single-end vertical13916. & horizontal sizing

M10-28A: $29,900 Best Value Portable Log Splitter

• 10” x 10” standard- Small cut manufacturer in PA has • 9”Easily x 20” double condition. produces high cut made the bestM10-28A: valued log $29,900 splitter. quality with patented ‘Cone’ (gross) Handles logs up to 32”. Uses • chips Honda Gas 30hp engine.

10-28A - 4 In Stock with 1700 hours, in very good

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

M12-28A: $35,000 Item ID 13185. Sam x702

M12-28A - 31999InBarko Stock 160D - new engine with

manuals and receipts. Purchased new for $32,500. Item ID 13865.

approximately 1500 hours. Hour

• x702 Single-end vertical &meter horizontal sizing M12-2 Sam dont work. The last 2 owners • 12” x 12” standard cut LOGGING EQUIPMENT have only used it to load trucks or BANDIT as needed.$35,000 Has a CTR M12-28A: • 11” x 24” double cutas a backup 1999 Bandit 1900 Tracked Disc delimber, grapple has been rebuilt.

• Honda Gas 30hp (gross) engine.

M12-28A - 3 In Sto

4 In Stock M12-28A Incylinders Stock drum design. M10-28A Can easily load 42’ - 13HP Honda motor. Manual start Chipper - Cat Under Carriage at - 3Boom have minor leaks.

-end vertical & horizontal sizing vans and produce 6 - 8 loads per but electronic option is available.

50% or better.

475 hp Cummins Item ID 13694. Sam x702 • Single-end vertical & horizonta • Single-end vertical & horizontal sizing •Jay Single-end &94horizontal sizing SAWMILL.SHOP | Call at (800) 598-6344 day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge Diesel.

7500 Hours.

Onevertical owner.

Barko 275 - Excellent value 10” standard cut • EDGERS 10” x &10” standard cut • 12” x 12” standard cut • 12” x 12” standard cut GANGS adjustable to single two way. Great Well maintained. Item ID 13294. with low at hours at 3,500. 5.9 • Saws 9” x- Two 20” double Brewco Brewco Saws cut Value! PA. Item ID 12062. Sam x702 Sam CUMMINS continuous grapple.

0” double cut •• x702 11” x 24” double cut 11” x 24” double cut in excellent condition.

Runs30hp great. (gross) Firewood Processor - This is a 2004 Bandit Beast Model 4680 Runs Great!. Item ID 13740. Sam • Honda Gas engine.

• Honda Gas 30hp (gross) engine. a Gas 30hp engine.

Item ID 13644. Sam (gross) x702 homemade processor with a 10’ 3412 Caterpillar Diesel engine x702 • Honda Gas 30hp (gross) engin FIREWOOD PROCESSORS

log deck. Has a hydraulic grapple,

BELL

with 850 HP. 5300 hrs. Mill in

SAWMILL.SHOP | offCall good Jay at (800) 598-6344 chain and kicker that all runs condition.

Just finished 10 1990 Bell Super T - This Bell has

2010 Shop Built Wood Processor

SAWMILL.SHOP | Call Jay at (800) 598-6344

- It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 439

of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Acre clearing job, ready to work!

Remote control. Big production

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 3

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

Grapple Assist for crooked logs

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

2019 Cord King Line-up

Email: info@cordking.ca Web: www.cordking.ca ‘13 KMC 2500 Track Skidder

‘95 John Deere C6 Tree Farmer Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

TOLL FREE 1-888-219-WOOD (9663) Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’

a Chomper Model 16 PDA

automatice firewood processor

Item ID: JW-986495 withsplitter John Deere power unit with • Wedge and Contact: J Williams design tolow hours.

Control panel includes suit your Ph: (888) 401-6367 x701

needs tach, oil pressure, water temp and • 24 to 72 ton splitting amp gauges.

Cuts logs up to 16”. capability One owner and comes with all chain conveyer, 8 way splitter, on • trailer.

The splitting 20,000lb goose neck Itemfastest ID manuals and receipts. Purchased cycle time on the 13916. Austin x703 new for $32,500. Item ID 13865. planet. Sam x702 Best Value Portable Log Splitter

Facts to consider:

- Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

1. Pioneered N. America’s first commercialChipper firewood processor in the mid 70’s 13HP Honda motor. Manual start - Cat Under Carriage at Boom cylinders have minor leaks.

drum design. Can easily load 42’

vans and produce 6 - 8 saw loads per but electronic optionM1820, is available.M2030 50% orand better.M2430 475 hp Cummins 2. 3 Bar models available day. Item ID 13882. Austin x703

Has Log Lift. Uses 4-way wedge

Diesel. 7500 Hours. One owner.

Brewco Saws - Two Brewco Saws

Value! PA. Item ID 12062. Sam x702

Sam x702

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

3. 7 Slasher Available Model 40, 44, 44HO, 48, 54 & 60 EDGERS & GANGS Saw Models adjustable to single two way.

Great 36, Well maintained.

Item ID 13294. with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

4. The Most productive machine on the planet, proven and guaranteed Firewood Processor - This is a 2004 Bandit Beast Model 4680 Runs Great!. Item ID 13740. Sam

in excellent condition. Runs great.

Item ID 13644. Sam x702

homemade processor with a 10’ 3412 Caterpillar Diesel engine x702 5. Go to our web site for live action video and details www.cordking.ca FIREWOOD PROCESSORS log deck. Has a hydraulic grapple, with 850 HP. 5300 hrs. Mill in BELL 2010 Shop 6.

Built Wood Processor chain andjoystick kicker that all runs off good condition. Just finished 10 1990 Bell Super T - This Bell has Available with single control - It has a 353 Detroit diesel, 40

of a 4 cylinder Mercedes power

Acre clearing job, ready to work!

a brand new Duetz engine. Lever

7. Exclusive lifetime splitter warranty and Remote 1 year bumper to bumper warranty. control. Big production control, 33” bar, pump and tranny unit. Has a 4’ chain saw that kicks

inch insert tooth circle saw, 30 foot  Issue 364 439

Lumbermens™  since 1986

❘

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

PleAse PrINt

Pulleys on Bearing . Parts Book and

belted rollcase to clear slabs and

12846. Sam x702

short pop-up transfer to edger,

where to order included. Item ID

cuts from sawline, log stop and

Zip

❑ Please Remove

loader to drop logs onto carriage,

Precision 58 Chip Pac - Single chute

stop and loader to deal with big

Sam x702

loading system,. Item ID 12764.

heavy duty log turner under log

EST

logs onto carriage and track and

Email

State

www.starwebhosting.net/woodsmen/ frame. Significant new spare parts to be negotiated separately. Item ID

The Tree that Started it All!

Trelan Chipper - This is a remote

chipper that has been totally rebuilt with about 840 hours except for the

BANDMILLS & HEADSAWS DealS Month SOUTHWEST FOREST PRODUCTS EXPO Danckaert Band Resaw - Roughly Fri, 25 August Sat, 26 August From ApriL TA B L E O F C O N T E N T S of the

13198. Sam x702

Manual Four Head Block - Manual Four Head Block Mounted on

all steel carriage. Husk. Manual Hot Springs, Arkansas www.arkloggers.com

'12 WoodmIzer LT 40

City

❑ Please Change

FOR CLASSIFIEDS Call 888.401.MENS TM CHIPPERS See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at L I S T New S York ELL EXCHANGE BUY SAVE 1986 Boonville, www.LumberMB\ISmagazine.com blades and 1 spare 36" blade),

DEPARTMENTS

V-12 Caterpillar power unit. New clutches, disc, bearing, liners and

custom chute. 23” in opening and V-12 Cat with 750-800 hp rating.

10 hours on this machine since it

has been rebuilt, it has a 24foot in

EquipmEnt REpREsEntativEs EST 1986

deck 20 foot out feed deck cAll uS todAy All youR uSed 72ND ANNUAL GREAT LAKES foR feed equiPMent with needS! 44 inch wheels, and all the Since 1986, Lumbermens has LOGGING & HEAVY EQUIPMENT EXPO published a monthly circular INDUSTRY NEWS......................22 Thurs, 7 Sept Sat, 9 Sept bells and whistles, its a production fREE EquipmEnt listings!

Call –

❑ Please add

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

LIST SELL EXCHANGE BUY SAVE Escanaba, Michigan(888) 401-6367 machine, with air strain conveyers

that go up and down, with airbags,

Individual Name

Company Name*

MID-ATLANTIC LOGGING & BIOMASS SAFETY ALERT...........................24 Morris Fri, 15 Sept - Sat, 16 Sept Phone

Address

PUBLISHER

Woods Publishing

LIST

SELL

EXCHANGE

item id: 14061 contact: Austin x703

BUY

SAVE

it includes two sets of Mcdonough Chris

EST

1986 AD Sales 2012 JoHn deere Selma, North Carolina 548G3 (888) 401-6367 www.midatlantic-logging-biomass­ MID-ATLANTIC expo.com/ Ext. 704 LOGGING & BIOMASS EXPO

pressure guides. Top Casting wheel

(888) 401-6367

DEALS OF THE MONTH..........25 ADVERTISING SALES *Company name and address required to process your change.

If you need to Change your Address or Add Your Name to our mailing list, then please complete this form and mail to:

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Lumbermens Magazine

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Reduced PRice item id: 14021 contact: Sam x702

FAbTeK 344b

P.O. Box 1916 Columbia, TN 38402

Donna Heninger

✁

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

feet a minute also has CLT presses.

ext. 700 chris@lumbermens.co

Lexington, Kentucky http://www.kfia.org/ Sam KentuckyWoodExpo.aspx (888) 401-6367

item id: 14061 contact: J Williams x701

For classifieds Call toDay (888) 401-6367

Item ID 13876. Austin x703

Austin S & W 125 Band Mill with

(888) 401-6367 Caterpillar generator - Low hours

❘

Walker

(888) 401-6367 Ext. 707 ❘

walker@lumbermensco.com

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Bell's Machining ..................... 27 Brute Force Mfg. ..................... 31

Buck Equipment (AIM) ........ 36 Send address changes to: SUBSCRIPTION: Lumbermens™, a trade newspaper for the logging, Lumberman's Exchange Mfgwood .............................. sawmilling, manufacturing, andCorley secondary manufacturing32 P.O.pallet Box 1916 industry, is freeTN within the United States to qualifying manufacturers Columbia, 38402 CRD Metalworks ....................

25 and industry suppliers. Please limit your subscription to one free copy per company orExchange mill location.

The Lumberman's is CW Mill-ArmorHog .............. 17

published monthly

by Woods Send address changes to Lumbermens™ CHANGE OF ADDRESS: CW Mill-Hogzilla ................... 15 Publishing, Box 1916, Magazine,P.O. 1116 W. 7th St., Ste. 297, Columbia, TN 38401. When Columbia, TN 38402. All rights possible, please include an old addressDyna label. Products ........................ 35 reserved. All editorial/ advertorial REPRODUCTION AND Advertisers are................... responsible 8 submissions are used at the RESPONSIBILITY: Empire Hydraulics discretion of the publisher and may for the contents and claims of their advertising. Lumbermens™ accepts beno edited for purposes of their clarityclaims. No Great Lakes Mfg. .................... responsibility for part of this publication may be34 and space. Although all efforts have reproduced or transmitted in any form or by any means, electronic Hahn Machinery ...................... been to ensure accuracy photocopying, of or made mechanical, including recording or any information 3 content submitted by advertisers storage retrieval system, without Hurst permission of Lumbermens™.14 Boiler ............................. and writers, the Lumberman's Negatives, artwork, and other items submitted for publication in Exchange, its principles and Iron Bull ...................................

Lumbermens™ are the property of advertisers.

Lumbermens ™ owns21 associates, are not held liable for material typeset and/or designed by Lumbermens ™ and reserves the errors or omissions. Reproduction, Kilgore Saw ............................. 22 use outside ofwith­ Lumbermens™. Lumbermens™ will exercise in right wholeto orits part, is prohibited precaution and printing material contained .................................

24 outevery written consent. in writing, designing,Lignomat within. We shallWoods not bePublishing liable for omissions or typographical errors. ©2017

- USED FORESTRY EQUIPMENT FOR SALE

❘

works,1 1/2" or 2" band, 22ft. track austin@lumbermensco.com Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434.

Austin Woods Phone: (888) 401-6367 ext. 703 austin@lumbermens.co

 liSt  Sell  exchange  buY  Save

Baker ...................................... 5, 7

on the703 mill, electronic computer Set Ext.

Cambridge, Ohio www.ohioforest.org

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703  austin@lumbermens.co Issue 364 lumbermenS  Since 1986

MAILING ADDRESS

in ve1y good condition, Cuts 130

Morris Woods, Ad Sales Phone: (888) 401-6367 ext. 704 morris@lumbermens.co

Ext. 702 THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct sam@lumbermensco.com

DESIGN DIRECTOR EQUIPMENT REPS

is an extremely accurate machine

chris@lumbermensco.com

morris@lumbermensco.com

KENTUCKY WOOD EXPO chris Woods Fri, Sept - (888) Sat, 16401-6367 Sept AD DIRECTORY.........................38 15Phone: MARKETING DIRECTOR

is supported on both sides. This

Ext. 700

Sam x702 Joe

Sam Wall Phone: (888) 401-6367 ext. 702 sam@lumbermens.co

CARRIAGES & DRIVES

(888) 401-6367 2010 Cardinal HD Carriage Ext. 709 Carriages lumbermenSmagazine.com (Sawmill) - Cardinal joe@lumbermensco.com

Carriage line it includes carriage

with onboard log turners, carriage

drive, hyd pac for carriage, Julie Menominee Saw .....................

29 sawyers cab, computer controls, 401-6367 cabinet with electronic drives for Metal Detector's Inc(888) . ..............

30

Ext. 701 Midwest Sharpening.............. 26

carriage knees, husk including

julie@lumbermensco.com 48" bottom saw and 36" top saw

Morbark ..................................... 9

STACKING The Tree that RACit All! Started

Multitek ................................... 12

Piper's Saw Shop.................... 13

Rotochopper............................ 40

Row Electric ............................ 20

Sawmill Exchange .................. 11 Since 1986, Lumbermens™ has published a monthly circular Select Sawmill ......................... 19 reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Smith Sawmill ...........................

4 PUBLISHER The Paul Bunyan Show ......... 39

AD SUBMISSIONS May be sent to— morris@lumbermensco.com

Woods Publishing

Thomas Industrial Controls..... 10 DESIGN DIRECTOR

Union Grove Saw & Knife.. 2, 37 Ted Monnin Universal Refiner ................... 23

MAILING ADDRESS 1116 W. 7th St., Ste. 297 • Columbia, TN 38401 WoodMizer ................................ l (888) 401-6367

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

POSTMASTER Send address changes to: Lumbermens™ Magazine 1116 www.BakerProducts.net W. 7th St., Ste. 297 • Columbia, TN 38401

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 5

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO)

TIMBERJACK 208 LOGGING 208 Timberjack for sale, skidder INTERNATIONAL CABLE is pretty solid all around, has a SKIDDER It’ll come with brand new couple leaks, but motor fires tire chains on it, Everything right up every time. Has new still works as it should, Gears starter, everything else on it shift smooth, engine has no works like it should.

Item ID 5320. Austin x703 blow-by’s, No leaks, been well maintained, Starts right JOHN DEERE 540D up and goes to work, He’s John Deere 540D cable. Skidder has an old man, but could have videos available for those new transmission, new hydraulic that can’t go look at it. One pump, and all of the cylinders were owner only, and he’s retiring. recently repacked. Has 23.1 tires A few of the good ones left all around and comes with new set of bear claw chains. This Ln. // PO Box 124 out13428 there,Victory Delivery available AdamsBuyer Center, pays NY 13606 as well. for Skidder has been a dependable trucking, About 200mi east machine, and is currently in the woods working daily. of Cincinnati OH Item ID 5249. Austin x703 Item ID 5568. Joe x709

Item ID: JW-909632 Contact: JOHNJ Williams DEERE 440C Ph: (888) 401-6367 John Deere 440C x701 for sale,

Skidder has a brand new motor in it, along with new clutch, new pressure plate, and new radiator, and rebuilt steering box. Winch was recently rebuilt as well.

Skidder is tight and dry, and will come with a full set of ice chains. Call/email for more information.

‘13 2500 ItemKMC ID 5242.

AustinTrack x703

Skidder

90′ TIMBERJACK 240A Item ID:Timberjack 14078 1990 240A Contact: Austin cable Skidder that’s Ph: (888) daily.

401-6367 x703 working Has a 5.9 cummins engine. Both the engine and transmission off ontorebuilt a conveyor. is a with very were in This 2021

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

ItemOptional ID 13644.Integrated Sam x702 Conveyor

FIREWOOD PROCESSORS

Easily transport machine to processing site to be processing wood in minutes!

2010 Shop Built Wood Processor Starting at

- It has a 353 Detroit diesel, 40

$89,995.95

inch insert tooth circle saw, 30 foot  Issue 364 439

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

TImberwolf Pro-HD Series Firewood Processors

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 ew

All N Firewood Processor - This is a for 4!

2 20

homemade processor a 10’ Dual Roller Feedwith System

log deck. Has a hydraulic grapple, Powered rollers assist in feeding the gnarliest logs up to 24” in diameter

chain and kicker that all runs off

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine 8 Foot Live Deck with 850 HP. 5300 hrs. Mill in

8’ long by 12’ wide 3-strand live deck, available in 3 or 5 strand configurations

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703 paperwork showing the work. Winch transfer case was also rebuilt shortly after. Pins and bushings are all tight, and is woods ready. Call/Email for more information.

Item ID 5082. Austin x703

‘95 John Deere C6 1996 TIMBERJACK 380C Tree Farmer 1996 Timberjack 380C 5.9

Item ID: 13920 Cummins, 4 speed Clark Contact: Austin Transmission 4 forward, 4 Ph: (888) 401-6367 x703 reverse, chains all around, new cable, new steering pins, have new center pins in box current fine. capacity!.

Item IDpins 13421.are Sam x702 Minor leaks,BARKO good running machine.

1994 Barko 160B - Electric Item ID 4825. Austin x703 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.).

Item ID 56 or 74 HP

diesel engine options

13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702 16’ Feed Trough

BELL

Process logs in excess of 32’ in length with assist of back roller

good condition. Just finished 10

1990 Bell Super T - This Bell has

Machines In Stock at our Network of Dealers across North America Remote control. Big production unit. Has a 4’ chain saw that kicks

sales@timberwolfequip.com

Financing Available

of a 4 cylinder Mercedes power

Lumbermens™  since 1986

❘

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

(607) 307-4029

a brand new Duetz engine. Lever

control, 33” bar, pump and tranny www.timberwolfequip.com ❘

 LumbermensCO.com

** CALENDAR**

3 Day Public Online Auction C&D Lumber Co.

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

Sawmill, Planer Mill & Rolling Stock Boonville, New York www.starwebhosting.net/woodsmen/ Day 1: 10AM | October 16 - 23 Day 2: 10AM | October 17 - 24 BANDMILLS & HEADSAWS SOUTHWEST FOREST PRODUCTS EXPO Day 3: 10AM | October 18 - 25 Danckaert Band Resaw - Roughly Fri, 25 August - Sat, 26 August The Tree 8AM - 4PM | October 21 & 22 Preview: 10 hours on this machine since it Hot Springs, Arkansas that Started Location: 1182 Pruner Rd., Riddle, OR 97469 www.arkloggers.com has been rebuilt, it has a 24foot in James G.itMurphy Co. - Murphyauction.com - 425.486.1246 All! 2015 PICHE 24’ 110-BIN LUMBER SORTER feed deck 20 foot out feed deck 72ND ANNUAL GREAT LAKES with 44 inch wheels, and all the Since 1986, Lumbermens has LOGGING & HEAVY EQUIPMENT EXPO published a monthly circular Thurs, 7 Sept - Sat, 9 Sept bells and whistles, its a production

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

ADVERTISING SALES 2015 COMACT

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Escanaba, Michigan

2022 HYSTER H110FT

May be sent to­ morris@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

A6 machine is anNICHOLSON extremely accurate in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

works,1 1/2" or 2" band, 22ft. track

2022 HYSTER Cambridge, OhioH210XD www.ohioforest.org

2018140KW CAT 980M Cat 3406 Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

AD SUBMISSIONS

is supported on both sides. This

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

Donna Heninger

P.O. Box 1916 Columbia, TN 38402-1916 (888) 2015401-6367 PICHE/SEC

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

DESIGN DIRECTOR

MAILING ADDRESS

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ MID-ATLANTIC 2015 expo.com/ COMACT GRADE EXPERT LOGGING & BIOMASS EXPO 2015 SAMUEL/PICHE

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

2018 HYSTERREPS H230HD2 EQUIPMENT

machine, with air strain conveyers

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

Bell's Machining ..................... 27 Buck Equipment (AIM) ........ 36

cabinet with electronic drives for Metal Detector's Inc. .............. 30 DAY 1 - SAWMILL carriage knees, husk including Midwest Sharpening..............

2660” DEBARKER SALEM INFEED LOG48" DECKS bottom saw and 36" top saw Morbark .....................................

9 SALEM 20’ 3-KNEE 60” CARRIAGE

Corley Mfg .............................. 32

Multitek ...................................

12ROOM EQUIPMENT GRINDING

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13 ASSORTED TRANSFERS, ROLLCASES & UNSCRAMBLERS

SALEM

Brute Force Mfg. ..................... 31

with onboard log turners, carriage drive, hyd pac for carriage, WELLONS

(2) 2015 GE AMP

sawyers cab, computer controls,

HIGHLIGHTED ITEMS NOT PICTURED

KOCKUMS 8’ HEADRIG BANDMILL

STACKING RAC

FILING ROOM EQUIPMENT

CONVEYORS & DRIVES The Lumberman's Exchange is 40 CW Mill-ArmorHog .............. 17 Rotochopper............................ published2006 monthly

by Woods CAT TH460B 2022 SAMUELS DAY 2 – PLANER MILL & KILNS CW Mill-Hogzilla ................... 15 Row Electric ............................(6) 20CHIP BINS Publishing, P.O. Box 1916, Columbia, TN 38402. All rights PRECISION CHIPPER W/(2) WSM BALANCED Dyna Products ........................ 35 Sawmill Exchange ..................

11 reserved. All editorial/ advertorial VIBRATORY CONVEYORS BLOWERS, FEEDERS, submissions are used at the Empire Hydraulics ................... 8 Select Sawmill ......................... 19 SILENCER & CYCLONES ASSORTED MCC’S discretion of the publisher and may TDS 4 STAIN TUNNEL be edited for purposes of clarity Great Lakes Mfg. .................... 34 Smith Sawmill ........................... and space. Although all efforts have Show 39 STOCK & STORES 3 –.........

ROLLING Hahn Machinery ...................... 3 The Paul BunyanDAY been made to ensure accuracy of (14) HYSTER FORKLIFTS content submitted by advertisers Hurst Boiler .............................

14 Thomas Industrial Controls .....

10 (10) SUPPORT TRUCKS and writers, the Lumberman's 2010 CAT 914G WHEEL LOADER Exchange, its principles and Iron Bull ................................... 21 Union Grove Saw & Knife 2, 37 SKIDSTEERS (2)..BOBCAT associates, are not held liable for AND MUCH MORE! 2021 BOBCAT S450 1994 CAT 330L errors or omissions. Reproduction, Kilgore Saw ............................. 22 Universal Refiner ................... 23 in whole or part, is prohibited with­ www.BakerProducts.net Lignomat ................................. 24 WoodMizer ................................ l out written consent.

James G. Murphy Co. - Murphyauction.com - 425.486.1246 - Visit Murphyauction.com For FullI Preview 800.S48.6914 S73.663.7711 ©2017 Woods Publishing

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

❘

 (888) 401-MENS L!

NO. 7

Phone 315.284.4126 02′ JOHN DEERE 640G2 Faxago, Same with brakes and 315.849.2045 new clutch / pressure plate 2002 John Deere 640G2 CableWebsite skidder with 14000 www.empirehyd.com frame (10hrs ago), This is in good hours, hasUnder new Pressure” motor in itinfo@empirehyd.com withEmailconditions, NOT old junk. It’s “Precision

less than 200 hours on it, and the transmission was rebuilt around the same time. Has all new bearings in the front end, as well as a new seat, new gauges, new heater, new glass, and new lights. Has 23.1’s on it with brand new chains on the front.

On a job now. Call for more info.

Item ID 4710. Austin x703 86′ TIMBERJACK 230A Motor rebuilt about 10 hrs

good to go to work, Owner for 10+yrs, and used for jobs here and there, been the family skidder, Can take videos of it if you can’t go look at it, Can help trucking it anywhere in the US, About 80mi south of Baltimore, MD Item ID 3605. Joe x709 FRANKLIN 170 SKIDDER Detroit 453 engine, Powershift, 4 speed, Winch works well,

Tires size: 23.1, Center section good, Runs and operates as it should Item ID 3517. Joe x709 98′ JOHN DEERE 640E 1998 John Deere 640E cable ‘16 Halverson skidder with 10000 H140 original hours, this skidder was bought Skidsteer (DEMO) directly the original Item ID: from JW-909632 owner/operator.

Contact: J WilliamsEverything works like 401-6367 it should.x701 Call for Ph: (888) more info.

Item ID 2701. Austin x703 98′ JOHN DEERE 640G 98′ Model John Deere 640G

with 10000 original hours, very straight skidder that was bought from the original owner/operator, everything works like it should. Call for more info.

‘93 Barko 180B Item ID 2694. Austin x703 Item ID: 14077 Contact: Austin 440C’S JOHN DEERE Ph: (888) 401-6367 x703 PACKAGE DEAL Up for sale are two John Deere 440C Cable skidders, one is in great shape, winch just totally rebuilt and and working daily.

The other has the transmission out of it, the trans has been rebuilt, but has not been put back in the skidder. Call for more info.

‘95 John Deere C6 Item ID 1966. Austin x703

Tree Farmer

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 439

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

1983 ID: JOHN DEERE 640C Item 13920 John Deere 640C grapple Contact: Austin skidder, has rebuilt Ph: (888) 401-6367 x703 transmission less than 200 hours ago, motor is strong with no blow by. Tight and has been capacity!. Item ID 13421. Sam x702 well maintained. Call/Email for BARKO more information.

1994 Barko 160B -Austin Electricx703 Item ID 5582. knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location allor equipment 22, of 25, 38 HP at engine options www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

MID-ATLANTIC

LOGGING & BIOMASS EXPO

that go up and down, with airbags, it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

OhioProcessors Timberwolf Pro-MP SeriesCambridge, Firewood www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

May be sent to­ Bell's Machining ..................... 27 Ultimate Power for Unrivaled Productivity morris@lumbermens.co 4” or 5” cylinder bore, equipped withForce manual autocycle to 31 Brute Mfg . .....................

POSTMASTERhandle the gnarliest logs Buck Equipment (AIM) ........ 36 Send address changes to: Lumberman's Exchange Corley Mfg .............................. 32 P.O. Box 1916 Columbia, TN 38402 CRD Metalworks .................... 25

Metal Detector's Inc. .............. 30

AD SUBMISSIONS

bells and whistles, its a production machine, with air strain conveyers

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

feed deck 20 foot out feed deck with 44 inch wheels, and all the

Escanaba, Michigan

Woods Publishing

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls,

cabinet with electronic drives for Process Large Logs Quickly

carriage knees, husk including Overbuilt frame, patented top roll clamping system, and Midwest Sharpening ..............driven 26 back roller allows for processing logs 32’ long andand 24”36" wide 48" bottom saw top saw Morbark ..................................... 9

STACKING RAC

Multitek ................................... 12 Piper's Saw Shop.................... 13

The Lumberman's Exchange is CW Mill-ArmorHog .............. 17 Rotochopper............................ 40 published monthly by Woods CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 Publishing, P.O. Box 1916, Columbia, TN 38402. All rights Dyna Products ........................ 35 Sawmill Exchange .................. 11 reserved. All editorial/ advertorial submissions are used at the Empire Hydraulics ................... 8 Select Sawmill ......................... 19 discretion of the publisher and may be edited for purposes of clarity Great Lakes Mfg. .................... 34 Smith Sawmill ........................... 4 and space. Although all efforts have Hahn Machinery ...................... 3 The Paul Bunyan Show ......... 39 been made to ensure accuracy of Split 2+ cords of premium firewood per hour 6’ long by 12’ wide 3-strand live deck, stores Weighing in at just 5500 lbs, Pro-MP processors content submitted by advertisers utilizing standard 4-way optionalIndustrial 6-way wedges vertically can be towed easily by any half-ton truck Boiler Hurst .............................

14 orThomas Controls ..... 10 with stow bar during transportation and writers, the Lumberman's Exchange, its principles and Iron Bull ................................... 21 Union Grove Saw & Knife.. 2, 37 associates, are not held liable for Starting at Financing Available errors or omissions. Reproduction, Kilgore Saw .............................

22 Universal Refiner ................... 23 in whole or part, is prohibited with­ sales@timberwolfequip.com Machines In Stock at our Network of Dealers www.BakerProducts.net Lignomat .................................

24 WoodMizer ................................ l out written consent. across North America www.timberwolfequip.com 800.S48.6914 I S73.663.7711 ©2017 Woods Publishing

2 Full Cords per Hour

Mobile Processing

Hydraulic Live Deck

(607) 307-4029

$39,995.95

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

❘

 (888) 401-MENS L!

NO. 9

Phone 315.284.4126 FaxCall for more information.

FMC 210 315.849.2045 FMC 210 CA 5250 track skidder, Item ID 5419. Austin x703 Website needs the transmission rebuilt. www.empirehyd.com It “Precision has a 653 inEmail 06′ JOHN DEERE 335 UnderDetroit Pressure”motor info@empirehyd.com

it with low hours. Skidder was refurbished in 1089 used in a handful of logging jobs in the early 90’s followed by light service in shot in 2018. Call/ Email for more information.

Item ID 5526. Austin x703 CAT 225LC EXCAVATOR Cat 225 machine starts right up, and has no big leaks. Will include a 28” and 48” bucket, also will include set of grapples.

LOG LOADER Motor has brand new pump. Does not smoke at all, New manifold, Brakes and lights all work, A/C – heat work well, Machine is dry, has no leaks, Boom is strong. Fast loader, Turn bearings are good, Owner’s health is causing him to sell it, Delivery available as well.

Buyer pays for trucking, About 70mi west of Orlando FL Item ID 5403. Joe x709

TAJFUN EQUIPMENT Lumbermens is a proud dealer for Tajfun equipment, from logging winches, to cranes, to firewood processors, Tajfun machinery makes high quality equipment. Call us for more ‘16 Halverson H140 information and a competitive quote today! (DEMO) Skidsteer Item ID: ID 5368.

Austin x703 Item JW-909632 Contact: J Williams TIMBERJACK Ph: (888) 401-63671010 x701 Timberjack 1010 double bunk forwarder, machine has around 15000 frame hours, and has had a lot of recent work done to it. That work includes: New

Reman Perkins engine, New Radiator, Rebuilt Clark 3 speed tranny, Brand new bushings and pins in center section, rebuilt cylinders in boom and in the steering, New set of ‘93grip Barko 180B sure grapples, new seals ID: 14077 inItem driveline.

It will come with a Contact: Austinfor the back, set of eco tracks Ph:set (888) 401-6367 and of wheel trackx703 for the front which are brand new.

This is a straight machine that is not bent or busted up. It has had the same owner/operator since it had 6000 original hours on it. Owner is only selling to retire. Call/Email for more information.

Item ID 5358. Austin x703

‘95 John Deere C6 2022 TIGERCAT Tree Farmer620H

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, Mention this ad and receive chain and kicker that all runs off a FREE GIFT (with purchase)

inch insert tooth circle saw, 30 foot

unit. Has a 4’ chain saw that kicks

 Issue 364 439

automatice firewood processor

Handles logs up to 32”. Uses

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

a Chomper Model 16 PDA

of a 4 cylinder Mercedes power

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

2022 Tigercat 620H ItemModel ID: 13920 grapple skidder Contact: Austin with 660 original hours, has bogiex703 grapple Ph: (888) 401-6367 on it. 35″ tires, and Canadian light package, and camera in front on the grill. Skidder is in capacity!. shape.

Item ID Call/Email 13421. Sam x702 excellent for BARKO more information.

Item ID 5334.

1994 Barko 160B -Austin Electricx703 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 11

Phone 315.284.4126 Fax TIMBERJACK 208 TIMBCO 445EXL 315.849.2045 Timbco 445Exl with 8500 208 Timberjack for sale, Website skidder is pretty solid all original hours, in excellent www.empirehyd.com around, couple leaks,Emailcondition. Machine has been “Precisionhas UnderaPressure” info@empirehyd.com

but motor fires right up every time. Has new starter, everything else on it works like it should.

Item ID 5320. Austin x703

well maintained and serviced.

Needs nothing, working daily. Call/Email for more information.

Item ID 5293. Austin x703

CAT 538 2020 Cat 538 log loader with 2800 hours on it, still has warranty available. Working daily. Call for more information.

Item ID 5302. Austin x703

2016 TAJFUN 400 JOY 2016 Tajfun 400 Joy firewood processor, unit includes log lift, and outfeed conveyer. Machine has been a one owner/one operator unit since new and is in excellent condition. Call/

Email for more information.

Item ID 5227. Austin x703 TIMBERJACK 1270 2003 Timberjack 1270 Processor, machine is working daily and is averaging 300 ‘16 Halverson H140 cords a week currently.

Owner isSkidsteer only selling(DEMO) to upgrade to a ID: brand new machine.

Item JW-909632 Recent work includes Contact: J Williams a new ECU, new 401-6367 injectors, x701 new fuel Ph: (888) pump, new fuel lines, new wiring harness, new chip, new rear window, all new head cylinders, and pins/bushings, new encoders, and new seal

kits. Head is super tight and has a new measuring wheel, and new rotator. Everything on the machine works as it should and currently has 24000 hours.

‘93 180Bx703 Item Barko ID 5199. Austin Item ID: 14077 Contact: Austin210B PRENTICE Ph: (888) 401-6367 x703 210B Prentice Knuckleboom, comes with reversible csi bucksaw. Works everyday, has joystick control, all new hoses on the boom, brand new grapple as well. Pretty tight and good loader. Only thing it does need is brakes.

Item ID 5085. Austin x703

‘95 LIEBHERR John Deere A312 C6 WITH RYANS HEAD Tree Farmer

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 439

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

good condition. Just finished 10

Acre clearing job, ready to work!

Remote control. Big production

 List  seLL  exchange  buy  save

1998 Model Item ID: Liebher 13920 A312 mobile wheeled excavator Contact: Austin with 9300 hours, equipped with x703 newer Ph: (888) 401-6367 Ryans saw head attachment. Both in good condition, the excavator has all new hoses, good tires, new capacity!.

Sam The x702 lights, andItem backIDup13421. camera.

BARKO Ryans head has low hours as well.

Item ID 4979.

1994 Barko 160B -Austin Electricx703 knuckleboom, 30' boom, 75hp

13′ BARKO 595ML MAGNUM motor, Rotobec continuous 2013 Barko 595 Magnum grapple, has 5,000 original loader 11000 hours. original (excellent condition.).

Item ID Csi hours, equipped with 264 delimber.

Recently had two of 13238. Chris x700 the rebuilt.

Good, solid 1995pumps Barko 775 B Feller Buncher loader everything on it works - Pumps recently redone. 400 hrs as it should. Call/Email for on injection pump. always started more information. good. working order.

IteminIDgood 4974.

Austin x70322in kohing head. head works great.

18′ DEERE Item IDJOHN 13185. Sam x702753J 2018 John Deere 753J with 1999 Barko 160D - new engine with 6000 original hours. Ready to approximately 1500 hours. Hour work, only selling to downsize. metergood dont work.

The last 2 owners Has undercarriage, and hotsaw have onlyhead. used itCall/Email to load trucksfor or more information. as a backup as needed. Has a CTR Item ID 4968. Austin x703 delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

BELL SUPER T CUTTER ItemSuper ID 13694. x702machine, Bell T 3Sam wheel 94 Barko - Excellent has the 275deutz air value cooled engine, with a 30” dangle head. with low at hours at 3,500. 5.9 Inside the cab it has levers for CUMMINS continuous grapple. controls, and does also have air Runs Great!. Item ID 13740. Sam conditioning.

Tires are size 28L x702will come with chains as and well. Overall inBELL good condition, and to work.

Call/Email 1990ready Bell Super T - This Bell has for more information. a brand new Duetz engine. Lever Item ID 4952. Austin x703

control, 33” bar, pump and tranny ❘

 LumbermensCO.com

Tough Meets QUALITY The Tree that Started it All!

The

Woods Publishing

ADVERTISING SALES

FOR CLASSIFIEDS Call 888.401.MENS Direct Bolt-In Seats for Most SeeMakes/Models pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at Boonville, New York www.LumberMB\ISmagazine.com www.starwebhosting.net/woodsmen/

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

10 hours on this machine since it has been rebuilt, it has a 24foot in

“WE KNOW SEATS SO YOUfeed DON’T deck 20HAVE foot outTO!” feed deck

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

** CALENDAR**

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO sales@toughseats.com TOLL9 Sept Thurs, 7 Sept - Sat, FREE

toughseats.com

with 44 inch wheels, and all the

855-579-0538

bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers

that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

it includes two sets of Mcdonough

WOOD-PAKER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

The Number One Bundling Machine Line for PackagedCARRIAGES Firewood & DRIVES Austin Woods

** INFO LINK**

2010 Cardinal HD Carriage (888) ext. 703 B &401-6367 B Manufacturing is in the foothills of the Allegany Mountain range in Olean, New austin@lumbermens.co (Sawmill) - Cardinal York.

We have been in business since January 1985 producing woodCarriages bundling systems called “THE WOOD-PAKER” for the firewood and waste wood industry.

We line have geared MAILING ADDRESS Carriage it includes carriage B Mfg . ...............................

18 producers.

M&F Gauge .............................

28 Box 1916 our P.O. machinery to meetB & the needs of various We offer several different types of with onboard log turners, carriage Columbia, TN 38402-1916 equipment for packaging wood from shrink wrapping, stretch33wrapping and bagging.

B. H.your Payne ..............................

16 Meadows Mill, Inc. ................ drive, hyd pac for carriage, (888) 401-6367 However you wish to BUNDLE we have a system for you.

AD SUBMISSIONS

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

May be sent All to­ these systems provide convenient packaging of30waste-wood, cabinet with electronic drives for Inc. ..............

Bell's Machining .....................

27 Metal Detector's morris@lumbermens.co slabs, edgings and firewood for the consumer market.

POSTMASTER

Brute Force Mfg. ..................... 31

carriage knees, husk including

Midwest Sharpening.............. 26

48" bottom saw and 36" top saw

Buck Equipment (AIM) ........ 36 Morbark .....................................

9 Send address changes to: THE WOOD-PAKER LINE INCLUDES: YOUR ONE-STOP SHOP FOR Lumberman's Exchange BUNDLING SUPPLIES Corley Mfg 32 Multitek 12 • The WOOD-PAKER: 6 models of.............................. the HEAT SHRINK oven ...................................

P.O. Box 1916 Columbia, system.TN 38402 CRD Metalworks .................... 25 Piper's Saw Shop.................... 13

STACKING RAC

• The WRAPPER: person stretch wrap unit17electric and ............................ 40 The Lumberman's Exchange is Single CW Rotochopper Mill-ArmorHog .............. published monthly by Woods manual available.

CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 Publishing, P.O. Box 1916, • The Columbia, TNBAGGER: 38402. All rightsA conveyor system using horizontal mesh Dyna Products ........................ 35 Sawmill Exchange .................. 11 reserved.bags.

All editorial/ advertorial submissions are used at the Empire Hydraulics 8 Select Sawmill ......................... 19 • The TILT BAGGER: Single person unit................... using mesh bags. discretion of the publisher and may be edited for purposes of clarity Great Lakes Mfg. .................... 34 Smith Sawmill ........................... 4 and space. Although all efforts have Affordable and Easy toMachinery Operate • 3INCREASE YOUR The Paul Bunyan Show ......... 39WOOD PROFITS! Hahn ...................... been made to ensure accuracy of content submitted by advertisers WOOD-PACKAGING has come into its own.

Hurst Boiler ............................. 14 Thomas Industrial Controls..... 10 and writers, the Lumberman's Exchange, its principles and Iron Bull ................................... 21 Union Grove Saw & Knife.. 2, 37 associates, are not held liable for errors or omissions. Reproduction, Kilgore Saw ............................. 22 Universal Refiner ................... 23 in whole or part, is prohibited with­ B & B Manufacturing • 3007 West River Road • Olean, NYwww.BakerProducts.net 14760 Lignomat ................................. 24 WoodMizer ................................ l out written consent.

800.S48.6914 I S73.663.7711 E-mail: bbmfg@verizon.net • www.thewoodpaker.com ©2017 Woods Publishing

716-373-5881

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

❘

 (888) 401-MENS L!

NO. 13

Phone 315.284.4126 FaxEverything on the machine CAT D5H TSK 315.849.2045 works like it should. Call for Cat D5h TSK track Skidder Website with 3700 original hours, 32” more info. www.empirehyd.com pads, andUnder goodPressure” undercarriageEmail Item ID 4699. Austin x703 “Precision info@empirehyd.com

at around 80%. Ready to work. Call/Email for more information.

Item ID 4939. Austin x703

643J 2007 643J cutter with 12,700 hrs, thinning saw head, 28LX26 tires, new starter,batteries, alt, gear box rebuilt, motor runs great uses no oil, does have a Hydraulic leak or 2, needs a bushing in one of cylinder arms, also comes with a 843J parts machine, has a tpost saw head,motor and Hydraulics are good 30k for both Item ID 4907. Austin x703

14′ JOHN DEERE 748H 2014 John Deere 748H model with 15000 frame hours, everything works like it should.

Recently had new pins and bushings, and new motor installed just over a year ago.

Equipped with sweda axles.

Call for more info.

Item ID 2707. Austin x703

2016 HYPRO 755HB PROCESSOR Tractor is a 1985 Versatile 276 tractor that has a flex plate between the engine and pumps, equipped with skid plate under the engine, 04′ TIGERCAT 620 and some new lights. Engine 2004 Tigercat 620 Tigercat is a 140HP cummins, and has Grapple skidder has brand 3200 hours on it. The Hypro 13428 Victory Ln. // POthan Box 124 new engine in it, with less only has 350 hours on it and Adams NYcomes 13606 is in great shape. Call for more 10 hours onCenter, it, and with a year warranty. Machine information itself is pretty tight, speed Item ID 2593. Austin x703 control valve is new, main pumps are fairly new as well.

TIMBCO 425D Has heat/Ac, every function Timbco 425D – Year 2001 – on the skidder works. Call for Quadco 20 360 degree head more info.

– 8.3 Cummins – Hours 7000 Item ID 4705 . Austin x703 / 300 hours on caterpillar undercarriage – new ‘05 Gehl CTL 70planetary 2009 JOHN DEERE 548G3 spindle. bearings and Item ID: JW-986495 one seals 2009 John Deere 548G3 with in both sides.

Contact: J Williams 7700 original frame hours, Ph: Item ID 401-6367 1429. Austin x703 (888) x701 ‘83 John Deere skidder is tight, and has a new engine in it with less than 400 725B TIMBERPRO 4850 hours on it. New 28L tires, chain Well conveyer, Maintained machine, 8 way splitter,tight on Item ID: 14073 20,000lb goose neck trailer.

Item ID Contact: Austin 13916. Austin x703 Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 439

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

and dry work ready with a Rolly II head. make an offer! Call for more pictures.

Item ID 1398. Austin x703 ’92 TIMBERJACK 450C 10K frame hours – single arch Halverson –‘16 power-shift trans – H140 tire size 28Ls – Tire tread: 20% front, Skidsteer (DEMO) 70% – 5.9 cummins – Itemback ID: JW-909632 Winch works – center section Contact: J Williams isPh: tight – no major slack, (888) 401-6367 x701 dry machine, no leaks Item ID 1369.

Robert (606) 875-4783 TIGERCAT 822 Item ID 1130. Austin x703 460 TIMBERJACK New Motor, new center pins, and Hyd Pump Cummins = 100hours on the new parts , ‘13 KMC 2500 Track Tires are at 60%, comes with aSkidder spare tire. Text or email for more Itempictures ID: 14078 Item ID 1124.

Contact: Austin Marcus (660) 833-9061 Ph: (888) 401-6367 x703 1979 TIMBERJACK 230

SKIDDER off ontoCABLE a conveyor.

This is a very

1979 Timberjack 230 Cable well built processor. Item ID 13820.

Skidder. Starts and runs Sam x702 perfect.

Excellet condition, Firewood Processor - This Winch, is Excellent tires. Eaton Straight Blade. for more a Chomper ModelCall 16 PDA pictures. automatice firewood processor Item ID 1072. with John Deere power unit with Kyle (807) 631-4081 low hours. Control panel includes tach, oil pressure, water temp and LOG LOADER

amp gauges.

Cuts logs upLC to 16”.

EXCAVATOR 225 1986 Caterpillar excavator One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

with a 3208 engine 5000 hours, total hours is 19000, Grapple, heals, bucket.

Item ID 1067.

Mose (208) 290-1888

‘93 Barko PRENTICE180B 384

Item ID: 14077 LOADER KNUCKLEBOOM Contact: Austin 2002 prentice 384 Ph: (888) 401-6367 Knuckleboom.

Sawx703not included. Mounted on ’89 S 2500 International truck.

Knuckleboom carrier/trailer also available.

Item ID 978. Austin x703 TIMBERJACK 380C GRAPPLE SKIDDER 1994 timberjack 380C 5.9 ‘95 John Deere C6 Cummins, 12 valve, 4 speed Clark transmission 4 forward 4 Tree Farmer reverse, external tranny cooler, Item ID: 13920 28L’s, trannyAustin less than 1000 Contact: hours, motor401-6367 redone no blow Ph: (888) x703 by, centers redone recent, no leaks, dry very minor seep on valve body and grapple capacity!. Item 13421. Sam x702 controls.

RearID ends redone BARKO a year ago, full time 4 wheel drive, John 160B Deere winch, good 1994 Barko - Electric winch, strong winch! knuckleboom, 30' boom, Call 75hp for more pictures! motor, Rotobec continuous Item ID 863. Sam x702 grapple, 5,000 original hours.

(excellent condition.).

Item ID JOHN DEERE 648D new 13238.main Chrisdrive x700 shaft, motor rebuilt 200775 orB so hours ago, 1995 Barko Feller Buncher rebuilt fuel injector, hydraulic - Pumps recently redone. 400 hrs rebuilt, grapple rebuilt, w/ on injection always started winch singlepump. arch tight machine good.rear in good order. 22in 60% 40%working front 28l’s Itemhead.

ID 547. x702 kohing headSam works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

Prince George, Canada good condition.

Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

250-563-8899

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 15

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

capacity!. Item ID 13421. Sam x702

BARKO

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

78th Annual Firewood Processor - This is

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

‘83 John Deere 4850

chain conveyer, 8 way splitter, on

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter

with 1700 hours, in very good

- Small manufacturer in PA has

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - TwoSponsored Brewco Saws By:

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID

made the best valued log splitter.

a Chomper Model 16 PDA

with John Deere power unit with

low hours. Control panel includes amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with

new for $32,500. Item ID 13865.

approximately 1500 2024 hours. Hour September 5 -7,

LOGGING EQUIPMENT BANDIT

have only used to load trucks or Green Bay, itWisconsin

Sam x702

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

Has Log Lift. Uses 4-way wedge

1995 Barko 775 B Feller Buncher

EXPO

tach, oil pressure, water temp and

Handles logs up to 32”. Uses

13HP Honda motor. Manual start

13238. Chris x700

automatice firewood processor

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

meter dont work. Complex The last 2 owners Resch Center as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

Well maintained.

ID 13294.Products with lowTrade at hours atShow 3,500. 5.9 Largest Cut-To LengthItem Forest Sam x702 CUMMINS continuous grapple. in the Midwest!

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

2004 Bandit Beast Model 4680 -

homemade processor with a 10’ 3412-Caterpillar Diesel engine $20 Admission Good ALL 3 Days!

Runs Great!. Item ID 13740. Sam

x702 Under 18 Free Kids

with 850 HP. 5300 hrs. Mill in BELL September 5-7, Thurs: Noon - 5pm; Fri: 8am-5pm; Sat: 8am - 1pm

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

good condition. Just finished 10

Acre clearing job, ready to work!

1990 Bell Super T - This Bell has

a brand new Duetz engine. Lever

For More Info Visit: www.gltpa.org • Call: 715-304-2861 Remote control. Big production control, 33” bar, pump and tranny unit. Has a 4’ chain saw that kicks

inch insert tooth circle saw, 30 foot  Issue 364 439

1994 Barko 160B - Electric

Great Lakes Logging & Heavy Equipment

‘05 Gehl CTL 70

- It has a 353 Detroit diesel, 40

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Lumbermens™  since 1986

❘

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 17

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com



“Precision Under Pressure”





No. 1 on the

industry tradeshow charts

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

19 44

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is



‘05 Gehl CTL 70

NASHVILLE, TN   ‘83 John Deere AUG 6-8, 2025 4850

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703



with 1700 hours, in very good

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID



13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

Exhibit Space Reservations

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per

made the best valued log splitter.

Handles logs up to 32”. Uses

13HP Honda motor. Manual start but electronic option is available.

Now open

day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

SFPAEXPO.com FIREWOOD Visit PROCESSORS log deck. Has a hydraulic grapple,

2010 Shop Built Wood Processor

chain and kicker that all runs off

inch insert tooth circle saw, 30 foot

unit. Has a 4’ chain saw that kicks

to Secure Yourof aSpace Today!

4 cylinder Mercedes power

- It has a 353 Detroit diesel, 40

 Issue 364 439

Lumbermens™  since 1986

❘

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

‘94 Caterpillar 320 and receipts. Purchased manuals One owner and comes with all

new forID: $32,500.

Item ID 13865.

Item 13936

Contact: Sam x702 Austin

Ph: LOGGING (888) 401-6367 x703 EQUIPMENT

BANDIT

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

‘88 Item John ID 13185.Deere Sam x702440D Skidder 1999 Barko 160D - new engine with have only used it to load trucks or

1999 Bandit 1900 Tracked Disc 4000 hours. Torque convertor Chipper - Cat Under Carriage at transmission. 14 hole wheels. Tires 50%30.5’s or better.

475 hpone Cummins are at 55% and at 80%.

Samthe x702 for several years. Skidder has 2004 Model 4680 12000Bandit hours. Beast Item ID 13805.

Sam

CUMMINS new.

Tires on continuous average are grapple. around Runs Great!.

Item ID 13740. Sam 80% Video: http://youtu.be/R_

3412 Caterpillar Diesel engine x702 with Timberjack 850 HP. 5300 hrs.

Millhard in to 1981 520 - Very good by! condition.

Just finished 10 come 653 Detroit.

Runs Great!.

Acre clearing job, ready to work!

Item ID 13741. Sam x702

Remote control. 608s Big production 2002 Timberjack with hot saw

- Approx. 6000 hours, Machine is  List  seLL  exchange  buy  save  Issue 364

58 Ch

Item Con Ph:

Rema Item ID: 13781 approximately 1500 hours. Hour Equip Contact: Sam meter dont work. The last 2 owners Speed Ph: (888) 401-6367 x702

as a backup as needed. Has a CTR in very good shape and has been delimber, grapple has been rebuilt. well maintained. Item ID 12194.

Boom cylinders have minor leaks.

Sam x702 Item ID 13694.1270B Sam x702 ‘98 Timberjack - 7,300 hrs.

Diesel. has 7500very Hours. owner.

Center littleOne slack.

This Well maintained.

Item ID 13294. skidder has been a back up skidder

Item Con Ph:

94 Barko 275 - Excellent Perkins 6 Cylinder Engine.value All with low at hours at 3,500.

5.9 modules and computer are brand

x702 MQZe5QEFw. Item ID 13572. Chris

BELL x700 1990 Bell Super T - This Bell has VALMET

a brand new Duetz engine. Lever 1998 Valmet 603 3-Wheeled control, 33” bar, pump Buncher - 6500 hours on and totaltranny

20

40% c

Ite Co main Ph

mach

Hard

of con

avail Item 2005

Forw

hydr

box i

2012.

pump

cond

machine but no hours on 4BT3.9 hour.

‘14 ❘  LumbermensCO.com

Lumbermens  since 1986

❘

Lo

 List  seLL  exch

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

CARRIAGES & DRIVES

LINK** Carriages (Sawmill) - Cardinal Field Proven Design forINFO the Independent Hardwood Sawmill MAILING ADDRESS

2010 Cardinal HD Carriage

Carriage line it includes carriage

B & B Mfg . ...............................

18 M&F Gauge ............................. 28- Two proven P.O. Box 1916 • Corley lnfeed and Edger with Lewis Optimization with onboard log turners, carriage Columbia, TN 38402-1916 B. H. Payne .............................. 16 Meadows Mill, Inc. ................ 33 drive, hyd pac for carriage, (888) 401-6367 names with proven results Menominee Saw .....................

29 Baker ......................................

5, 7 sawyers cab, computer controls, AD SUBMISSIONS May be sent to­ cabinet with electronic drives for • True HardwoodBell's Optimization Machining ..................... 27 Metal Detector's Inc. .............. 30 morris@lumbermens.co carriage knees, husk including Brute Force Mfg. ..................... 31 Midwest Sharpening.............. 26 • Small footprint that fits inside most existing mills POSTMASTER 48" bottom saw and 36" top saw Buck Equipment (AIM) ........ 36 Morbark ..................................... 9 Send address changes to: Exchange •Lumberman's Value priced with allMfgof.............................. the optimization capability12 of more Corley 32 Multitek ...................................

P.O. Box 1916 Columbia, TN 38402 CRD Metalworks ....................

25 Piper's Saw Shop.................... 13 elaborate high speed Edger Optimizers

STACKING For more information on our new "M" Series Edger RAC and

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

other Corley and Lewis products, give us a call.

LEWIS CONTROLS CORLEY SAWMILL OPTIMIZATION MACHINERY Chattanooga, Tennessee Iron Bull ................................... 21

Kilgore Saw ............................. 22 Phone 423-698-0284 Lignomat ................................. 24

www.corleymfg.com

- USED FORESTRY EQUIPMENT FOR SALE

❘

Cornelius, Oregon

Union Grove Saw & Knife.. 2, 37

Phone 503-648-9119

Universal Refiner ................... 23

www.BakerProducts.net

WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY l§

www.lewiscontrols.com 800.S48.6914 I S73.663.7711 ❘

 24/7 SUPPORT 0

❘

 (888) 401-MENS L!

NO. 19

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

All Sizes Available!

BANDSAW

TOP PERFORMING, economical blades for all primary &

BLADES

“Precision Under Pressure”

secondary wood processing. Welded to your lengths!

We also offer expert sharpening services, plus...

Gang • Edger • Scragg • Trim • Split • Strob ....and just about any Custom Saws you need to keep you cutting longer... for less. Ask about FREE Shipping!

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

©2019 Wood-Mizer LLC

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

Call Marvin Miller for a quote 231-924-5953 (fax) 402-966-2752 / 37590 E. Anderson Bridge Rd • Kilgore, NE 69216

ROW ELECTRICAL EQUIPMENT, INC. ‘95 John Deere C6 Tree Farmer

YOUR SOURCE FOR USED, RECONDITIONED:

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Item ID: 13920 • DC Motors - Crane and Mill • Transformers, Three-Phase Contact: Austin ‘13 KMC 2500 Track • Adjustable Speed Drives • Across/Line Magnetic Starters Ph: (888)Starters 401-6367 x703 • Generators AC and DC • Reduced Voltage Skidder • Engine-Generator Sets • Safety Switches Item ID: 14078 • Transformers, Single Phase • Phase Convertors Contact: Austin capacity!. Item ID 13421. Sam x702 Ph: (888) x703 P.O. Box 2812 • Toledo, Ohio 401-6367 43606

• Squirrel Cage Motors • Gear Motors • Wound-Rotor Motors • Synchronous Motors • DC Motors

Fax to:

BARKO 800-248-4479

WWW.RoWELECTRiCAL.CoM 1994 Barko 160B - Electric 419-248-4479 rowelec@glasscity.net sales@rowelectrical.com off onto a conveyor. This is a very knuckleboom, 30' boom, 75hp WE ANSWER THE PHONE 24 HOURS • WE BUYItem USED ELECTRICAL well built processor.

ID 13820. motor, Rotobec continuous

419-244-8887

Sam x702

grapple, 5,000 original hours.

a Chomper Model 16 PDA

13238. Chris x700

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere Bell Ultra T on 4850 Tracks

Item ItemID: ID:14073 14023 Contact: Contact:Austin Sam Ph:(888) (888)401-6367 401-6367x703 x702 Ph: with winch, direct drive. Comes

with 1700 hours, in very good

with 6000 hour extended warranty.

condition. produces high Has only Easily 2600 hours.

Has new

quality patented 30.5 X chips 32 26 with ply on rear and‘Cone’ 70% on front.

StillCan a new skidder drum design. easily loadand 42’

priced sell. Item Sam vans andtoproduce 6 ID - 8 13696. loads per x702

day. Item ID 13882. Austin x703

2013 JD 848H Grapple Skidder -

EDGERS & GANGS

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

Contact: J Williams

Ph: (888) x702 manuals and401-6367 receipts. Purchased

Item ID: JW-192810 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID Ph: (888) 401-6367 x701 13916. Austin x703

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - 23.1 x 26 Tires 50%, Rebuilt

- It has a 353 Detroit diesel, 40Item Trans.,Good Tight Machine.

ID 13191.

Sam x702 inch insert tooth circle saw, 30 foot 1995 JD 290D with Hytec 4700

Item ID: 14004

One owner and comes with all Contact: Sam

new for $32,500. Item ID 13865.

Undercarriage at 50%. New water

on injection pump. always started Sanborn Scragg good. in good working order. 22in Mill kohing head. head works great.

Item ID: 14050 Contact: Austin Item ID 13185.

SamWoods x702 (888) 401-6367 Ext. 606

1999 Barko 160D - new engine with approximately 1500 hours. Hour

Franklin 170 Skidder - This would

made the best log splitter.

John Deere 20 valued hole Sweda wheels

LOGGING EQUIPMENT Grapple - Good running condition.

BANDIT Front blade. Detroit 6V53 engine.

be a great starter skidder. It is

to find 20 hole John Deere sweda 13HP Honda motor.

Manual start

swing boom grapple.

Chipper - Cat Under Military Carriagestyle at

turbo and 3 speedhave power shift leaks.

Boom cylinders minor

does great job in hardwood. Priced

- Small manufacturer in PA has

to sell!. Item ID 12206. Sam x702

Handles logsare upmounted to 32”. Uses - These 50’s on hard rims.

Still 50%option tread left on these but electronic is available. tires. 4 available. Item ID 13852.

Has Log Lift. Uses 4-way wedge Sam x702

Value!

PA. Item IDForwarder 12062. Sam 2004 Fabtek 546C - x702 in front at 60%.

650 tires in back homemade processor with a 10’ at

3-5 60% and come with tracks. Front

log deck. Has a hydraulic grapple, blade. JD engine. One owner.

chain and kicker that all runs off

Double bunk. Item ID 13363. Sam

of a 4 cylinder Mercedes power x702

FMCsaw that kicks unit. Has a 4’ chain 1977 (est) FMC 220CA Tracked

Sam x702

Skidder w/ESCO Swing Boom

1999 Bandit 1900cannot Tracked No winch....they fit Disc with

tracks 70%. Item ID Cummins 13227. Sam 50% oratbetter.

475 hp x702

Diesel. 7500 Hours. One owner.

2012 Refurbished FMC 210 Tracked

Well maintained. Item ID 13294.

Skidder - 1976 Model that has been

Sam x702 totally refurbished in 2012. No

hours since updates were done.

2004 Bandit Beast Model 4680 -

Includes warranty on machine 3412 Caterpillar Diesel engineand tracks. Detroit 6V53 engine with

with 850 HP. 5300 hrs. Mill in

195HP. Clark 28000 Powershift

good condition. Just finished 10

transmission. Clark 40,000 lb

Acre clearing job, ready to work!

Winch.

ROPS Cab. Includes bolt

on grapple head with full function.

Remote control.

Big production New Paint. Item ID 12731. Sam

Skidder - Good❘ running unit.  seLL  x702 Harvester HeadLumbermens - 290D in good™  since  Issue 364 1986 439  List exchange  buy  save condition. Engine just overhauled.

- Pumps recently redone. 400 hrs

13910. Austin x703

Good running condition.

Firewood Processor - This30.5 is atires

1991 John Deere 640D Skidder

‘05 CAT TK560

amp gauges. Cuts logs up to 16”.

1995 Barko 775 B Feller Buncher

1977 (est) FMC 220CA Tracked

Best Value Portable Log Splitter

tight. Machine is dry.

Engine inare excellent condition.

Runs great. x702

low hours. Control panel includes

‘16 Halverson H140 Skidsteer

adjustable to single two way. Great FABTEK

runsID great.

Item IDx702 13555. Sam Item 13644.

Sam

with John Deere power unit with

tach, oil pressure, water temp and

4200 hours. Tires at 50%. Winch.

Brewco Sawsrunning - Two Brewco Saws Very good condition.

Pins

automatice firewood processor

(excellent condition.). Item ID

Detroit 6V53 cranks and runs

well. Military style tracks at 70%.

FRANKLiN

1995 Franklin 170 - Enclosed cab,

meter dont work. The last 2 owners have only used it to load trucks or

a backup as needed. a as single arch with winch. Has Runsa CTR

delimber, grapple has been 453 rebuilt. good and pulls good.

Detroit transmission.

Good Item ID 13694.

Samcenter x702 section.

There are a few leaks, but nothing

94 Barko 275 - Excellent value

major. Item ID 13819. Sam x702

with low at hours at 3,500. 5.9

Franklin 3000 - 4BT Cummins

CUMMINS continuous grapple. engine with approximately 600

hours. machine Runs Needs Great!.tires.

ItemGood ID 13740.

Sam for the money and for a start up x702

company. Item ID 13786. Sam x702

BELL

2003 Franklin Q80 Grapple Skidder

1990 Bell Super T - This Bell has

- 7500 hours, but just 5000 hours

a brand Duetz engine.

Lever on reman new engine.

New Radiator;

New Hydraulic Pump; control, 33” bar, pumpComfort and tranny cab with good working heat and

air; Tires at Item ID 12450. ❘  80%.

LumbermensCO.com Sam x702

GMC

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

IntegrIty • PrecIsIon • QualIty • Value

Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

10 hours on this machine since it

Dump See why we are your BeSt Source for bandsaw blades!

machine, with strain bandsaw blades in the business—we ship all air over theconveyers US. W that go up and down, with airbags, Grinder Satisfaction always guaranteed!

MID-ATLANTIC LOGGING & BIOMASS Ite

Item ID: 13965

Fri, Contact: 15 Sept -Austin Sat, 16 Sept

Woods Publishing MID-ATLANTIC

ADVERTISING SALES

LOGGING & BIOMASS EXPO

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Selma, North Carolina Ph: (888) 401-6367 x703 www.midatlantic-logging-biomass­ expo.com/

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

LUMBERMEN’S Equipment

Donna Heninger

EQUIPMENT REPS

Digest

Band saw Blades

in ve1y good condition, Cuts 130

1-888-857-5153

535C Cat 3406 140KW Genset, Ohio hectk Our Quality motor.

Has new jetPrice fit 12,400 CCambridge, • Our swing Service • Our Ou ID: 13868 www.ohioforest.org Item hours ready to run.

Item ID 13434. system. This machine is loaded...

‘89 Contact: Sam Sam x702 system for cold has pro-heat Ph: (888) 401-6367 x702 Item DRIVES weatherCARRIAGES start. Has fire&suppression Con 2010 Cardinal HD Carriage system.

All working!

Hydraulic tracks like new he will add for Ph: additional $20,000. Item ID 13494.

B & B Mfg. ............................... 18

B. H. Payne .............................. 16

Item......................................

ID: 13961 Baker 5, 7

Sam x702 M&F Gauge ............................. 28 1999 Timbco TF-820D Forwarder Meadows Mill, Incnew . ................

33 11k hrs on machine, Cummins

Menominee Saw8k ..................... engine at around hrs and has29

Contact: Austin ‘06drive Western Star fresh pump & imp. pump.

Bell's Machining .....................

Ph: (888) 401-6367 x703 27 Metal Detector's Inc. .............. 30

Item 14011 Buck Equipment (AIM) ........ 36 Mor barkID: .....................................

9 Send address changes to: but could useAustin a little fixing here computer and Scorpion controls, Contact: Lumberman's Exchange Corleyspeed Mfg control. .............................. ................................... and there. the401-6367 bucket is sloppy 2 sets of 32® Multitek 1996 Timbco FB w/2008 ® P.O.T425B Box 1916 Ph: (888) x703 12 PRO-TEC-TOadded WRAP & PRO-TEC-TO SLEEVE Columbia, TN 38402 Rotosaw Intermittent Saw Head.

is an extremely accurate machine

THE PAUL BUNYAN SHOW www.lumbermenonline.com 2013 works,1 1/2" or 2" band, 22ft. track Fri, 6 OctCaterpillar - Sun, 8 Oct

Hydraulic Lines – Fuel Hoses – Air Lines 28L 26 tires some great, some Michigan Special BruteBundles Force Mfg. .....................

31 Midwest Sharpening .............. 26 Electric Wire – Control Cables decent. Machine is ready to work,

Item#May 13848 be sent to­ morris@lumbermens.co Contact: Sam Ph: (888) 401-6367 x702 POSTMASTER

thIn Kerf

Dismanteling S&W 125 Band Mill Blades with Item ID: 14007 PO Box 1146 Caterpillar generator - Low hours Contact: Austin Columbia, TN 38402-1146 1-800-477-7606 Fax 388-3564 Ph: (888) 401-6367 on(931) the mill, electronicx703 computer Set

** Them INFO LINK** PROTECT ALL ® ‘15 Cord King M44 Wrap With Pro-Tec-To John Deere 640 Grapple Skidder AD SUBMISSIONS

Co

pressure guides. Top Casting wheel Ph is supported on both sides. This

KentuckyWoodExpo.aspx

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

it includes two sets of Mcdonough

feet a minute also has CLT presses.

Mag 64-knive Ask About Item ID 13876. AustinOur x703 Lexington, Kentucky Source Grinder http://www.kfia.org/ LUMBERMEN’S Equipment Digest

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

MAILING ADDRESS

has been rebuilt, it has a 24foot in

Escanaba, Michigan Schutte Hammermill

PUBLISHER

DESIGN DIRECTOR

Danckaert Band Resaw - Roughly

feed deck 20 foot out feed deck 72ND ANNUAL GREAT LAKES Item ID: 13818 withand 44 inch wheels, and the all the We offerEQUIPMENT the highest quality people use LOGGING & HEAVY EXPO welds Contact:our Sam Thurs, highest 7 Sept -level Sat,of9integrity Sept and precision bells and whistles, its a production to give you (888) 401-6367 Ext.the 603best

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

BANDMILLS & HEADSAWS

Woodmaster ‘01 Benson 34’ End

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

could stand be pinned and 13 Piper's SawtoShop ....................

CUT YOUR Alberta, DOWNTIME AND YOUR COSTS! bushed.

No major issues!.

Item ID Canada.

Customer will Machine has 540 degree non The Lumberman's Exchange is ............................

40 CW Mill-ArmorHog .............. 17 Rotochopper x702 Protection Against Pinching, Crushing, Rubbing & Abrasion published monthly by Woods 13212. Sam x702 pay shipping to closest US entry continuous rotation on upper. 9900 CW Mill-Hogzilla ................... 15 Row ............................

2004 Electric Hydro Ax 470 - This cutter20 Publishing, P.O. Box 1916, UV RAYS! Both – EVEN are ID Impervious to Oils and 2000Solvents.

Timbco 415D w/2005 Fabtek point. Item 13532. Sam x702 hours. New Undercarriage.

New Columbia, TN 38402. All rights has around 7000 hours.

It’s a clean Dyna ProductsStroke ........................

Sawmill Exchange .................. reserved. advertorial 4-Roller Processor - 21,000 hours11 1998 Timberline Delimber 35 glass in All cab.editorial/ Very good running and tight machine.

Only reason submissions are usedMaximum at the Provides Protection for Logging, For The Distributor Empire Hydraulics ...................

Sawmill .........................

19 on meter.

New JD 6 cylinder 8400 hours.

U/C at 60%.

Will crank8 Select condition. Rotosaw has 360 degree discretion Construction of the publisher&and may Stationary Applications Like: selling is due to an upgrade.

Nearest You, Callhours.Item engine in 2011 has 7000 and run.

Owner retired.

Machine rotation.

Cummins engine be edited for purposes6CT8.3 of clarity Great Lakes Mfg. .................... 34 Smith Sawmill ........................... 4 ID 13846. Sam x702 Debarker Buggies Pantographidle Arms Forklift Masts and space.

Although all efforts have 800-355-1250 U/C at 65%. Extensively rebuilt for• past year.

Item ID 13599. with 215• HP. Machine runs•great.

Hahn MachineryLoaders ...................... 3 The Paul Bunyan Show ......... 39 been made• Wheel to ensure accuracy of Loaders • Skidder Grapples • Knuckleboom 2004 new Hydro Ax 670 - Engine has or Visit with swing motor, new charge SamHeads x702 • Stroke Working selectbyhardwood content submitted advertisers • in Fellerbuncher Headstoday.

• Harvesting Hurst Boiler .............................

14 Thomas Industrial Controls ..... 10 www.pro-tec-toproducts.com about 500 hours, new saw motor and writers, the Lumberman's pump, new high speed saw motor, 1999 Timbco 820D Clam Bunk Item ID Delimbers 13548. Sam• Dozer x702 Blades Exchange, its principles and and main disc last year.

Iron Bull ...................................

21 Union Grove SawPrevious &pump, Knifenew ..owner 2, 37 new hydraulic oil Forwarder 10,300 hours.

New 1997 Timbco 820C Clam Bunk ® associates,Anywhere are not heldHoses liable for & Wires Are – Pro-Tec-To Products OEM’s, Repair Facilities & had theallhydrastats redone.

This23 errors or omissions.

Reproduction, cooler, main cylinders repacked. than 500 hours ago. 22 Universal Forwarder - “4000” originalProtection, hours. engine Kilgore Saw .............................

Refiner ...................

Offers Maximum Lowerless Costs, Reduced Distributor Inquires Welcome in whole or part, is prohibited with­ has a 22”includes high capacity headdrive, and is andHand Less Spills! Can Package extra final accept bunks, but none with24 WoodMizer 20.3 x 25Downtime rubber at 70%.

Lignomat ................................. ................................ l out written consent. a very clean machine.

Mounted on extra computer screen, and extra machine.

Owner has two sets of sanded and painted, brand new ©2017 Woods Publishing tracks all new Lexan.

Located in25 CRD ,Metalworks ....................

Carriages (Sawmill) Cardinal Oil just totally changed-(100 new

Carriage line it includes carriage gallons) with new filters. Item ID

1379 withSam onboard 13598. x702 log turners, carriage 1998 2000 Timbco w/33" Bar Saw drive, hyd 425D pac for carriage, Felle Head.

40 degree tilt on head.

540 sawyers cab, computer controls,

‘08 John Deere CT332

degree rotation on upper body. cabinet with electronic drives for One year old Cummins 6CT8.3 carriage knees, husk including engine.

Resealed 48" bottom sawpumps. and 36"Rebuilt top saw Item ID: 13855 valve bank. 90% undercarriage.

Contact: Sam Can accept hot401-6367 saw. Fire x702 Ph: (888)

STACKING RAC

suppression system. Auxiliary oil

cooler. Good running machine.

HydroAx 611B - New injectors, Item ID 13549. Sam x702 injector pump. New 5.9 cummins 2000 Timbco 445D - Recent engine engine. Rebuilt hydraulic pump and pump last winter. New and new teeth. Item ID 13768. Sam sprockets and rollers. 22” quadco x702 hot saw. Owner retired. Located in 1999 Hydroax 511EX - New Montana. Item ID 13790. Sam x702 cummins engine830TF with Forwarder only 1500 2005 TimberPro

Caterpillar just replaced -hours.

6580 hours.

Very good condition. gear box to hydraulics at the end Tracks for all bogies. 710/45-26 of summer. hours total on tires at 70%. 11000 Includes bolsters cutter.

Tires are 28L’s with @ 80%, 2 and back rest.

Comes www.BakerProducts.net36” @ 40% and slick.

Brand new 800.S48.6914 I S73.663.7711 grapple withone grapple saw option.

hour

large

liftin

large

Cum

Dece

1324

2002

12,00

Work

Aust

1998

Bunc

Cum

hour

22” L

A/C

Cutti Sam

34’s with 50% tread. Item ID 13828. center section. 20” single post FORESTRY EQUIPMENT FOR SALE ❘  SELL YOUR EQUIPMENT TODAY  ❘ buy  24/7 SUPPORT ❘ Lumbermensmagazine.com  (888) 401-MENS NO. 21 - USED L! 0 Issue 364 Lumbermens  since 1986 l§ ❘  List  seLL  exchange  save ❘ head.

KMC Sam x702 Heat and air work. Item ID

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

INDUSTRY NEWS

OSHA Unveils Draft Indoor/ Outdoor Heat Stress Rule “Precision Under Pressure”

‘93 Barko 180B

After working for a number of years on a national rule to regulate ‘16heat Halverson H140 Item ID: 14077 hazards in the workplace, the Occupational Safety and Health Administration Contact: Austin Skidsteer (DEMO) (OSHA) has just released a proposed heat stress standard to protect workers Ph: (888) 401-6367 x703 Item ID: JW-909632 from indoor and outdoor heat stress. OSHA stated, “Every year, dozens of Contact: J Williams workers die and thousands more suffer illnesses related to hazardous heat Ph: (888) 401-6367 x701 exposure that, sadly, are most often preventable.”

The final rule isn’t expected to be published until sometime in 2025. But its adoption is far from certain. This process could be derailed if there is a change in who has control over the White House. And there will likely be legal challenges to the final rule in the courts.

Lawyers from Fisher Phillips, a law firm specializing in workplace safety law, predicted, “The next year will see OSHA turning up the heat on employers who don’t take heat safety seriously, regardless of what happens with this proposed rule. The agency has already conducted about 5,000 federal heat-related inspections using its National Emphasis Program (NEP) related to heat John Deere C6 illnesses and injuries for both outdoor and indoor workers…The heat NEP is effective until April 2025,‘95 and it will see OSHA target workplaces where heat-related injuries or illnesses are prevalent during high heat conditions.”

Tree Farmer The proposed new rule covers general duty employers including pallet and lumber facilities. It requires employers to develop an injury Item ID: 13920 and illness prevention plan to control heat hazards in workplaces affected by excessive heat. Among other things, the plan would require Contact: Austin ‘13 KMC 2500 Track employers to evaluate heat risks and – when heat increases risks to workers – implement requirements for drinking water, rest breaks and Ph: (888) 401-6367 x703 Skidder control of indoor heat. It would also require a plan to protect new or returning workers unaccustomed to working in high heat conditions.

Itemto ID: 14078 if a worker is experiencing signs and symptoms Employers would also be required to provide training, have procedures respond 13428 Victory Ln. // PO Box 124 Contact: Austinsigns and symptoms of a heat-related illness, and take immediate action to help a worker experiencing of a heat emergency. capacity!.

Item ID 13421. SamThe x702 Adams Center, NY 13606 Ph: (888) 401-6367 x703 unofficial version can be viewed at www.osha.gov/heat-exposure/rulemaking. The official version will be published in the Federal BARKO Register soon, and there will be a public comment period for stakeholders to submit comments to OSHA on the proposed standard.

1994 Barko 160B - Electric Fisher Phillips has developed a guide for employers to comply with existing OSHA best practices for mitigating heat hazards. You off onto a conveyor. This is a very knuckleboom, 30' boom, 75hp can view this resource at https://www.jdsupra.com/legalnews/osha-releases-first-ever-national-heat-2821648/ well built processor. Item ID 13820.

motor, Rotobec continuous

Firewood Processor - This is

(excellent condition.). Item ID

Sam x702

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

Innovative 13238. Chris x700

a Chomper Model 16 PDA

automatice firewood processor 1995 Barko 775 B Feller Buncher Clean-Burn Design with John Deere power unit with

- Pumps recently redone. 400 hrs

tach, oil pressure, water temp and

good. in good working order. 22in

low hours. Control panel includes

drum design. Can easily load 42’

amp gauges. Cuts logs up to 16”.

Manufacturing a full line of biomass fired One chain conveyer, 8 way splitter, on combustion systems backed with fifty years of owner and comes with all 20,000lb goose neck trailer.

Item ID manuals and receipts. Purchased innovative clean-burn design. Diverse in every way with multi-fuel blending capability.

Hurst 13916. Austin x703 new for $32,500. Item ID 13865. stokers utilize hundreds of common and Sam x702 Best Value Portable Log Splitter abundant solid biomass fuels.

- Small manufacturer in PA has Large or small scale, project LOGGING EQUIPMENT management is eased with the made the best valued log splitter.

BANDIT impressively short installation time Handles logs up to 32”. Uses 1999 Bandit 1900 Tracked Disc required with prefabricated 13HP Honda motor. Manual start Chipper - Cat Under Carriage at modular components.

day. Item ID 13882. Austin x703

Has Log Lift. Uses 4-way wedge

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ vans and produce 6 - 8 loads per

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 439

but electronic option is available.

50% or better. 475 hp Cummins

adjustable to single two way. Great

Well maintained. Item ID 13294.

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a Rotary Dryers homemade processor with a 10’ Sand Dryers log deck.

Has a hydraulic grapple, Grain Dryers Lumber chain andKilns kicker that all runs off Cement Kilns of a 4 cylinder Mercedes power Brick Kilns unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

grapple, 5,000 original hours.

Diesel. 7500 Hours. One owner.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

on injection pump. always started kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

50

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

YEARS control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers

MID-ATLANTIC LOGGING 230B & BIOMASS ‘05 Tigercat Fri, 15 Sept - Sat, 16 Sept

‘97 Prentice it includes two sets210E of Mcdonough

Item ID: 13911 Selma, North Carolina Contact: Austin www.midatlantic-logging-biomass­ Ph: expo.com/ (888) 401-6367 x703

that go up and down, with airbags,

Item# 13795 pressure guides. Top Casting wheel Contact: Sam is supported on bothx702 sides. This Ph: (888) 401-6367

is an extremely accurate machine 2006 Logosol Planer - This is a 10” in ve1y good condition, Cuts 130 4 sided removable feet a planer minutethat alsohas has CLT presses.

Every Wide Band KENTUCKY WOODReputable EXPO Fri, 15 Sept Sat, 16 Sept Supplier Offers

side cutters that will take x703 up to Item ID 13876.

Austin Lexington, Kentucky 3 High Quality Swedish Steel http://www.kfia.org/ 12” includes a blower S lumber & W 125and Band Mill with KentuckyWoodExpo.aspx 3 3” – 8” Band Widthsystem. Item ID 13428. Sam x702

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Caterpillar generator - Low hours

3 16 to 20 Gage POLE & POST PEELERS on the mill, electronic computer Set THE PAUL BUNYAN SHOW 3 Double Cut Options PS8 Post Peeler This peeler works,1 1/2" or 2" band, has 22ft. track Fri, 6 Oct - Sun, 8 Oct ‘99 Hydro-Ax to electricity over 3 Choice Stellite Catconverted 3406 140KW Genset, 12,400 Cambridge, Ohio of Swage orbeen

DESIGN DIRECTOR Donna Heninger

‘06 Brewco B1600 EQUIPMENT REPS Resaw Sam Wall

Contact: Sam Ph:Austin (888) 401-6367 When You Woods Buy Yourx702 Circular Saws From B.H. Payne

511EX www.ohioforest.org hydraulic.

Comes withItem a operators hours ready to run.

ID 13434.

Item BUT ID: 13799 cab, electric boxes, conveyor and Sam x702 ONLY THE Contact: Sam kickers and will peel a 3” post to a CARRIAGES & DRIVES BY 401-6367 MENOMINEE SAW GUARANTEES Ph: (888) x702 7” post. Comes with a barko loader

** INFO LINK**

‘05 Woodmizer LT300

(888) 401-6367 ext. 703 You’ve Bought the best... We Guarantee It! austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it

Escanaba, Michigan

MARKETING DIRECTOR

(888) 401-6367 ext. 702 Item ID: 13862 sam@lumbermens.co

BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

Item ID: 14031

Quality Combined 18 B& B Mfg. ...............................

P.O. Box 1916Traditional Contact: Austin Columbia, TN 38402-1916 With Todays Technology B. H. Payne Ph: (888)..............................

401-6367 x703 16 (888) 401-6367 Quality Brand

‘98 611 Ex-Hydro ‘10 Shop Built Baker752-0627 Call 800 AD SUBMISSIONS Circular Saws Ax ......................................5, 7 Wood Processor Make Sure To Ask For Our Free, Complete Saw Catalog SawMay Bits and Shanks be sent to­ Reg. U.S. Pat Off

Bell's Machining ..................... 27

WOLVERINE

2010 Cardinal HD Carriage

• Cutting Edge Plasma mounted Welds on (Sawmill) a truck that- Cardinal has also Carriages been converted to electric Runs great.

Has worked double line itCapacity includespower. carriage • The Industry’s Highest Carriage Band Saw M&F Gauge 28 Item ID 13926.

Sam x702 shifts so it has............................. higher hours with onboard log turners, • Quick Delivery from our HUGE Inventory carriage Meadows Mill, . ................

33 at 13,500, but has Inc been well PORTABLE SAWMILL drive, hyd pacPusher for carriage, 14’ Snow • Fast Sharpening & Exchange Program maintained. New last year. 29 36” Portablecab, Sawmill - Maximum Menominee SawU/C ..................... sawyers computer controls, Item ID: JW-492406 to Keep YOU Running ‘11 Doosan DL200 24” grousers.

All pumps rebuilt last diameter log36” Maximum length Contact: J Williams cabinet with electronic drives for Metal Detector's Inc. .............. 30 Item JW-113876 (888) 401-6367 x701 • ID: Competitive Pricing year.

Gull wing engine cover with ofPh: cut-20’6” Powered by a Koehler carriage knees, husk including

Circular Knives 13948 Item ID: 13916 morris@lumbermens.co We Manufacture & SellItem InsertedID: Tooth Headsaws, Solid Tooth Carbide Tipped Saws Brute Force Mfg. ..................... 31 Midwest Sharpening .............. 26 Contact: Austin Contact: Austin J Williams Contact: CarbidePOSTMASTER Strobe ® Saws Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also hydraulic lift for easy maintenance. Diesel 9.8HP Blade-1-1/4” 48" bottom saw and 36" by top13’2” saw Ph: (888) 401-6367 x703 Ph: (888) 401-6367 x703 Ph: (888) 401-6367 x701 9 Gives B.H. Payne & Company Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels, And ONLY Menominee You Everything Buck Equipment (AIM) ........ 36 Mor bark .....................................

Send address changes to: Rolly II in good condition and long 12 Volt saw-head precision Saw Manufacturers John Deere Lumberman's Exchange Knife548G2 Grinding Wheels, Saw Gumming Wheels & Knives.

You need in a Wideup/down.

Band Saw – Plus Corley Mfg .............................. 32 Multitek computer ................................... measures well. Owner12 Item ID 13897. Austin Item ID: 14042 P.O. Box 1916 Here’s What You Get With Every B.H. Payne Saw Expert Service from the Industry’s Most Columbia, TN running 38402 Contact: Austin retiring. Saw Bought new for $540,000!. x703 Skidder - Very good ID 13438.

Sam x702 .................... 25 Piper's Shop ....................

13 CRD Metalworks • Saws manufactured from only the Highest Quality Nickel Alloy Steel.

Knowledgeable Staff.

Ph: (888) 401-6367 x703 ‘14 B66TD Item ID 13362. Sam x702 36” Portable Sawmill - Maximum condition.

Big Capacity Grapple!

2007 TimberPro 810 Combi The Exchange is CW Mill-ArmorHog • Lumberman's Each Saw Milled with State-Of-The-Art Precision CNC Milling..............

Machine.17 Rotochopper............................ 40 published monthly by Woods 2006 TimberPro 830Got COMBI diameter log-36” Maximum length 9400 hours.

Tires at 40%.

Totally Machine - Forwarder set but Rotochopper • We Tension Your Saw to Your RPM Speed Leaving...................

OurupFactory. a Wide CW BEFORE Mill-Hogzilla 15 Row Electric ............................

20 Band Problem?

Publishing, Box$32,000 1916, in recent - 3410P.O. hours.

Harvester/Forwarder Just 5700 of cut-20’6” Powered by Koehler gone through by TP Dealer who comes with rebuilt Log Max 750 • Your Satisfaction Completely Guaranteed.

Columbia, TN 38402. All rights Call Menominee Saw Today and You’ll Item ID: 13838

upgrades and repairs. Fecon

Dyna Products ........................ 35

reserved.

All editorial/ advertorial did the following: Repacked and processing head.

Less than 5200 Contact: Sam BH250are Mulching Head. Item ID Empire Hydraulics ................... 8 submissions used at the resealed hydraulic cylinders – total hours.

Runs veryExt. well.603 Has (888) 401-6367 discretion of the publisher and may 13502. Sam x702 be edited for purposes of clarity grapple arch, steering; Replaced blade plumbed a clam 34 Greatand Lakes Mfg. for ....................

P.O. Box 90608 2011 Although Tigercat 620D - Thishave is a and space. all efforts hydraulic hoses and lines where bunk.

New swing gear box.

Quick 3 East Point, GA 30364 Machinery ...................... been made to ensure accuracy of 5500 Hahn Item ID 13408. Sam x702 low hour skidder with only 404 761-8711 content submitted by advertisers needed – fill pump, grapple, etc; attach in 15 min. to switch head to .............................

2014Boiler Tigercat 630D Grapple 14 hours on aLumberman's cummins engine and Hurst andFax writers, the 404hydraulic 761-5398 Repacked fill pump; grapple. Cummins 6.7 QSB engine.

Exchange, its principles and Skidder - Dual Arch Grapple. Just a fire suppression system. Comes Iron Bull ...................................

21 associates, not held liable forcenter Replaced are exhaust; Replaced 260HP. Optional Tracks on all 1990 hours.

3 year/5000 hour PT mounted on 35.5 tires at 50% back “Since 1890” Reproduction, errors or omissions.

Kilgore Saw .............................

22 pins; Straightened and painted bogies adds $10,000.

Item ID 13501. in whole part,front is prohibited warranty. 35.5 tires with dualing andor40% and goodwith­ chains on Lignomat panels; Changed Sam x702 ................................. 24 out written consent.all fluids and rings 60%. Wide blade. Winch. all 4 tires.

Has the bigger 630 axles Web E-mail: info@paynesaws.com Site:atwww.paynesaws.com ©2017 Woods filters; Re-insulated cab;Publishing Checked 2010 TimberPro 725B w/Rolly II

B.H. Payne & Company, Inc.

STACKING RAC

Sawmill Exchange .................. 11 hours. Very good condition. Comes gas Blade 1-1/4” by 13’2” ‘0419HP Fabtek 344B Learn Why More Mills Trust the Pro! Select Sawmill 19 with grapple for......................... loading forwarder long 12 Volt saw-head precision

Item ID: JW-093430 ‘05 Transport up/down Electrical Contact:12J Volt Williams TOLL FREE Trailers Custom Ph: (888) 401-6367 x701 for harvesting.

2 sets of tracks for Forward/Reverse Saw Head The Paul Bunyan Show ......... 39 LogSetPup bogies. up for quick change Travel. Item ID 13899. Austin x703 1-800-582-0470

and Log Max 7000 processing head Smith Sawmill ...........................

4

Thomas Industrial Controls..... 10 Item ID: JW-538174 from harvester to grapple. One Dixon Sawmill VERY UNIQUE Processor - This- is a Chomper 900&16th Menominee, MI 49858 Union Grove Saw KnifeSt., .. 2, 37 Contact: J Williams man operation. Log Max head has AND MILL! Dixon super EFFECTIVE with a 60hp engine.

In Tel: ...................

906-863-2609 Fax: 14, 906-863-1147 Ph: (888) 401-6367 x701 Universal top saw andRefiner runs well.

Compare23 to 52 in nice bottom blade and171 38 hours, in top very shape.

Only

Email: info@menomineesaw.com

WoodMizer new machine................................ at $650,000. Item IDl

www.BakerProducts.net blade.

It hasgreen a fourchain bladeconveyer. vertical comes with

800.S48.6914 I S73.663.7711 WWW.MENOMINEESAW.COM edger diesel powered a fuel All of the manuals for with the engine,

13439.

Sam Waratah 624x702 Super - New

and no winch. Center pins are tight Item ID 13526. Sam x702 duezt401-MENS 247hp Item fixed wiring asEQUIPMENT needed. Item FOR SALE Processor Clean Machine.

PLANERS and the(888) chopper itselfmotor. come with Computer FORESTRY ❘ - Super  SELL YOUR EQUIPMENT ❘ head  (Logrite).

24/7 SUPPORT efficient ❘2006  NO. 23 -and USED l§ TODAY for L! roatation on the0grapple w/ a Tigercat 630C Grapple 2015 Tigercat 234B Loader - Model and extra fuel tank.

Item ID 13929. it, as well as all of the electrical 10500 hours. New main pump 30’ reach on the boom. Joystick Skidder - Very good running 234B. Only 300 hours on this Sam x702  Issue 364 Lumbermens  since 1986 ❘  List  seLL  exchange  buy  save ❘  Lumbermensmagazine.com

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

SAFETY ALERT

Trip to the Auto Parts Store Leads to Serious ‘93 Barko 180B Injuries for Loader Operator ‘16 Halverson H140 “Precision Under Pressure”

Skidsteer (DEMO)

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

BACKGROUND Item ID: JW-909632 On a Fall morning in the Southcentral US, a loader operator the logging deck to make an emergency Contact:left J Williams Ph: (888) x701 a ruptured hydraulic hose on trip to the auto parts store to purchase a replacement part after401-6367 experiencing the loader. Conditions were clear and not a contributing factor in the accident.

UNSAFE ACTS AND CONDITIONS The driver was exceeding the posted speed limit which caused him to lose control of the company service truck. Additionally, he was not wearing a seatbelt and was driving on a suspended license.

‘95 John Deere C6

Tree Farmer

ACCIDENT Item ID: 13920 Contact: Austin The driver was traveling on a straight 2-lane roadway‘13 and began to exceed speed limit of 45 KMC 2500 Trackthe posted Ph: (888) 401-6367 mph as he approached an overpass. He continued to accelerate, reaching an estimated speed of 100x703 mph.

Skidder Once he topped the overpass, the driver lost control ofItem his ID: vehicle 14078 and crossed the center line. The truck 13428 Victory Ln. // PO Box 124 Contact: continued and struck the guide wires forAustin a utility pole, causing theItem truck to flip capacity!.

ID 13421.

Samand x702 Adamsdown Center, an NY embankment 13606 Ph: (888) 401-6367 x703 BARKO travel across a street that ran parallel to the road on which he was initially traveling. The truck continued 1994 Barkoof 160B Electric gas to flip numerous times while striking several trees, and eventually struck the backside a - natural off onto a conveyor.

This is a very knuckleboom, 30' boom, 75hp building. well built processor. Item ID 13820.

Sam x702

motor, Rotobec continuous

grapple, 5,000 original hours.

INJURY Firewood Processor - This is (excellent condition.). Item ID The driver was completely ejected from the truck anda seriously injured. lyingx700 unresponsive Chomper Model 16 PDAHe was found 13238. Chris on the ground directly in front of theCTL crashed Local authorities and paramedics onBuncher scene ‘05 Gehl 70 vehicle.automatice firewood processor 1995 Barkoarrived 775 B Feller Item ID: JW-986495 shortly after the accident and stabilized the injured driver transport. initially withfor Johnemergency Deere power unit with - The Pumpsdriver recentlywas redone.

400 hrs Contact: J Williams lowfurther hours. Control panel includes on injectionUpon pump. arrival, always started transported by ground ambulance to a local hospital for evaluation and treatment. he Ph: (888) 401-6367 x701 tach, oil pressure, water temp and good. in good working order.

22in ‘83 John Deere was immediately airlifted to a regional trauma center and admitted to the intensive Care Unit (ICU) with amp gauges. Cuts logs up to 16”. kohing head. head works great.

4850 numerous life-threatening injuries, One owner and comes with all Item ID 13185. Sam x702 chain conveyer, 8 way splitter, on Item ID: 14073 including a traumatic brain injury, 20,000lb goose neck trailer.

Item ID manuals and receipts.

Purchased 1999 Barko 160D - new engine with Contact: Austin numerous spinal fractures (lumbar, 13916. Austin x703 new for $32,500. Item ID 13865. approximately 1500 hours. Hour Ph: (888) 401-6367 x703 thoracic, and cervical),Bestand a Sam x702 Value Portable Log Splitter meter dont work. The last 2 owners collapsed with 1700 hours,lung. in very good - Small manufacturer in PA has LOGGING EQUIPMENT have only used it to load trucks or condition. Easily produces high

made the best valued log splitter.

drum design. Can easily load 42’

13HP Honda motor. Manual start

BANDIT

quality chips with patented ‘Cone’ Handles logs up to 32”. Uses RECOMMENDATIONS

1999 Bandit 1900 Tracked Disc

vans and produce 6 - 8 loads per

50% or better. 475 hp Cummins

FOR CORRECTION but electronic option is available.

• Always wear a seatbelt when day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge traveling in a moving vehicle EDGERS & GANGS adjustable to single two way. Great • Always safe speed when Brewco Saws - maintain Two Brewco a Saws Value! PA. Item ID 12062. Sam x702 driving (abide speed in excellent condition.

Runsby great.posted Firewood Processor - This is a Itemlimits) ID 13644. Sam x702 homemade processor with a 10’ FIREWOOD PROCESSORS deck.have Has a hydraulic grapple, • Ensure that all employeeslog who 2010 Shop Built Wood Processor chain and kicker that all runs off access to drive company vehicles - It has a 353 Detroit diesel, 40 of a 4 cylinder Mercedes power are properly licensed. inch insert tooth circle saw, 30 foot  Issue 364 439

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

MID-ATLANTIC

LOGGING & BIOMASS EXPO

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

MARKETING DIRECTOR 1999 John JOHN DEERE 640G Williams CABLE SKIDDER (888) 401-6367 ext. 701 Item ID: 7314 j@lumbermens.co

Lexington, Kentucky 2009 JOHN DEERE 540G3 2001 CAT 517 SWING http://www.kfia.org/ CABLE SKIDDER BOOM TRACK SKIDDER KentuckyWoodExpo.aspx Item ID: 7299 Item ID: 7286

S&W 125 BandSKIDDER Mill with GRAPPLE

Contact: AUSTIN DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 703 EQUIPMENT REPS (C) 931-797-8029

Contact: AUSTIN AUSTIN SHOW THE Contact: PAUL BUNYAN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Fri, 6 Oct - Sun, 8 Oct Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 Cambridge, Ohio (C) 931-797-8029 (C) 931-797-8029

on the mill, electronic computer Set Contact: AUSTIN Email: Austin@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 703 Cat 3406 Genset, 12,400 (C) 140KW 931-797-8029

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

www.ohioforest.org

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

2015 CATERPILLAR 525D Baker ...................................... 5, 7 Menominee Saw ..................... 29 GRAPPLE SKIDDER 1998 CAT 320B DELIMBER . .............. 30 Item ID: 7054 Item ID:Inc 7337 Bell's Machining ..................... 27 Metal Detector's

Contact: AUSTIN POSTMASTER Email: Austin@lumbermensco.com Send 888-401-6367 address changes to: Phone: EXT 703 (C) 931-797-8029 Lumberman's Exchange

Contact: AUSTIN Brute Force Mfg. ..................... 31

P.O. Box 1916 Columbia, TN 38402

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and2015 space.WOODMIZER Although all efforts have LT-50 been made toSAWMILL ensure accuracy of content submitted by advertisers Item ID: 7016 and writers, the Lumberman's Exchange, its principles and Contact:are AUSTIN associates, not held liable for Email: Austin@lumbermensco.com errors or omissions.

Reproduction, Phone: 888-401-6367 EXT 703 in whole or part, is prohibited with­ (C) 931-797-8029 out written consent. ©2017 Woods Publishing

hours ready to run. Item ID 13434.

Sam x702

Email: Austin@lumbermensco.com Buck Equipment (AIM) ........ 36 Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Corley Mfg .............................. 32

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

- USED FORESTRY EQUIPMENT FOR SALE

❘

drive, hyd pac for carriage,

2019 PRENTICE 2384D

sawyersLOG cab, computer LOADERcontrols,

cabinet with Itemelectronic ID: 7292 drives for carriage AUSTIN knees, husk including Contact: Email: Austin@lumbermensco.com 48" bottom saw and 36" top saw Phone: 888-401-6367 EXT 703 (C) 931-797-8029

STACKING RAC

Multitek ................................... 12

CW Mill-ArmorHog .............. 17

Email: Austin@lumbermensco.com Kilgore Saw ............................. 22 Phone: 888-401-6367 EXT 703 (C) Lignomat 931-797-8029 ................................. 24

Carriage line it includes carriage

with onboard log turners, carriage

Email: Austin@lumbermensco.com Mor bark888-401-6367 .....................................

9 Phone: EXT 703 (C) 931-797-8029

Piper's Saw Shop.................... 13

Iron BullAUSTIN ................................... 21 Contact:

Carriages (Sawmill) - Cardinal

Contact: Sharpening AUSTIN Midwest .............. 26

CRD Metalworks .................... 25

2005 BELL ULTRA C FELLER Hahn Machinery ...................... 3 BUNCHER Item.............................

ID: 7092 Hurst Boiler 14

CARRIAGES & DRIVES

2010 Cardinal HD Carriage

2015 INTERNATIONAL 5100 BOOM PICKER TRUCK Item ID: 7070 Thomas Industrial Controls..... 10

The Paul Bunyan Show ......... 39

QUADCO 24C SAWHEAD Item ID: 7065

Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029 www.BakerProducts.net

Email: Austin@lumbermensco.com

Universal Refiner ................... 23 Phone: 888-401-6367 EXT 703 (C) 931-797-8029 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

B U Y S

B & B Mfg. ............................... 18

2019 JOHN DEERE 648L2 AD SUBMISSIONS GRAPPLE SKIDDER May be ID: sent to­ Item 7308 morris@lumbermens.co

Caterpillar generator - Low hours Item ID: 7080

H O T

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

1997 TIMBERJACK 360C

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Item ID 13876. Austin x703

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 25

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM “Precision Under Pressure”

2021 WOODMIZER LT-70 SUPER WIDE SAWMILL Item ID: 7320

2020 WOODMIZER EG200 TWIN BLADE EDGER Item ID: 7303

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘16 Halverson H140 2010 WOODMIZER LT-300 Skidsteer (DEMO)

‘93 Barko 180B

PORTABLE BAND SAWMILL Item ID: JW-909632 OPERATION Contact: J Williams Item ID: 7272x701 Ph: (888) 401-6367

Item ID: 14077 Contact: Austin3674CD 2021 BAKER Ph: (888) 401-6367 x703 PORTABLE BAND SAWMILL COMPLETE OPERATION Item ID: 7259

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

13428 Victory Ln. // PO Box 124 NISSAN FORKLIFT Adams Center, Item ID: 7406NY 13606 Contact: LYNNE FOR MORE INFORMATION Phone: 314-621-7711

NORTHFIELD NO. 7 SURFACE PLANER Item ID: 7406 Contact: LYNNE FOR MORE INFORMATION Phone: 314-621-7711

‘13 KMC 2500 Track Skidder

DIEHL RIP SAW WITH IDLE CONVEYOR capacity!. Item ID 13421. Sam x702 Item ID: 7406

Contact: LYNNE FOR MORE INFORMATION 314-621-7711 off ontoPhone: a conveyor.

This is a very

Contact: LYNNE 1994FOR Barko 160B - Electric MORE INFORMATION Phone: 314-621-7711 knuckleboom, 30' boom, 75hp

Sam x702

grapple, 5,000 original hours.

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850 HAZEL THORN CHOP SAW Item ID:Item 14073 ID: 7406 Contact: Austin Contact: LYNNE Ph: (888) 401-6367 x703 FOR MORE INFORMATION Phone: 314-621-7711

with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

NOTCHER

in excellent condition. Runs great.

(CHALLENGER MACHINE BUILT)

Item ID 13644. Sam x702 Item ID: 2125

FIREWOOD PROCESSORS

Contact: JOE

2010 Shop Built Wood Processor Email: Joe@lumbermensco.com 888-401-6367 EXT 709 - ItPhone: has a 353 Detroit diesel, 40 (C) 801-362-2170

inch insert tooth circle saw, 30 foot  Issue 364 439

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 30" OLIVER VERTICAL BANDSAW chain conveyer, 8 way splitter, on Item ID: 7406

20,000lb goose neck trailer. Item ID Contact: LYNNE 13916. Austin x703 FOR MORE INFORMATION Phone: 314-621-7711 Best Value Portable Log Splitter

- Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and

TORA amp gauges.

Cuts MAX logs up to 16”.

ELECTRIC WALKIE

One owner and comes with all Item ID: 7406 manuals and receipts. Purchased Contact: LYNNE new for $32,500.

Item ID 13865.

FOR MORE INFORMATION Phone: 314-621-7711 Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

12′ JD 550K LGP

homemadeItem processor with a 10’ ID: 3753 log deck. Has a hydraulic grapple, Contact: JOE

chain and kicker that all runs off Email: Joe@lumbermensco.com 888-401-6367 EXT 709 ofPhone: a 4 cylinder Mercedes power (C) 801-362-2170

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Item ID: 14078 TANNEWITZ 30" BANDSAW Contact: Austin Item ID: 7406x703 Ph: (888) 401-6367

well built processor. Item ID 13820.

H O T

B U Y S

‘95 John Deere C6 Tree Farmer

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 -

CAT D6K2

3412 Caterpillar Diesel engine Item ID: 1488 with 850 HP. 5300 hrs. Mill in Contact: JOE

good condition.

Just finished 10 Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXTto 709 Acre clearing job, ready work!

(C) 801-362-2170

Remote control. Big production

 List  seLL  exchange  buy  save

BARKO

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing14′ head. works JDhead 650K LGPgreat.

Item ID: 3574 Item ID 13185.

Sam x702

1999 Barko Contact: JOE160D - new engine with Email: Joe@lumbermensco.com approximately 1500 hours. Hour Phone: 888-401-6367 EXT 709

meter dont work. The last 2 owners (C) 801-362-2170 have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

JD 550G LT

Item ID: 3686

BELL

Contact: JOE 1990 Bell Super T - This Bell has Email: Joe@lumbermensco.com Phone: EXT 709Lever a brand888-401-6367 new Duetz engine.

(C) 801-362-2170

control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at Boonville, New York www.LumberMB\ISmagazine.com www.starwebhosting.net/woodsmen/

The Tree that Started 1996 TIMBERJACK 380C it All!

Item ID: 4825 Since 1986, Lumbermens has Contact: AUSTIN published a monthly circular Email: Austin@lumbermensco.com reaching sawmills, loggers, Phone: 888-401-6367 EXT 703 pallet makers, recyclers and (C) 931-797-8029 industrial woodworking plants worldwide.

LOGGING & HEAVY EQUIPMENT EXPO Contact: AUSTIN Thurs, 7 Sept - Sat, 9 Sept Email: Austin@lumbermensco.com

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Escanaba, Michigan Phone: 888-401-6367 EXT 703 (C) 931-797-8029

MID-ATLANTIC

LOGGING & BIOMASS EXPO

is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx FMC 210 Item ID: 5526

THE Contact: PAUL BUNYAN SHOW AUSTIN Fri,Email: 6 Oct Sun, 8 Oct Austin@lumbermensco.com Phone: 888-401-6367 Cambridge, Ohio EXT 703 (C) 931-797-8029 www.ohioforest.org

Item ID 13876. Austin x703 S & W 125 Band Mill with

98′ JOHN DEERE- Low 640Ehours Caterpillar generator Item ID: 2701 on the mill, electronic computer Set

Contact: AUSTIN works,1 1/2" or 2" band, 22ft. track Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 (C) 931-797-8029

hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

86′ TIMBERJACK 230A

Bell's Machining ..................... 27 Item ID: 3605 Brute Force Mfg. ..................... 31

1983 JOHN DEERE 640C30 Metal Detector's Inc. ..............

Item ID: 5582 Midwest Sharpening.............. 26

Email:Equipment Joe@lumbermensco.com Buck (AIM) ........ 36

Email: Austin@lumbermensco.com Mor bark ..................................... 9

Corley (C) Mfg .............................. 32 801-362-2170

Multitek(C) ...................................

12 931-797-8029

Columbia, TN 38402

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers TIMBERJACK 208 and writers, the Lumberman's Item ID: 5320 Exchange, its principles and associates, not held liable for Contact: are AUSTIN errors or Austin@lumbermensco.com omissions. Reproduction, Email: inPhone: whole or part, is prohibited with­ 888-401-6367 EXT 703 out written (C)consent.

931-797-8029 ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

JOHN DEERE......................

440C’S Hahn Machinery 3

The Paul Bunyan Show ......... 39

PACKAGE DEAL Hurst Boiler .............................

14 Item ID: 1966 Iron Bull ................................... 21

FRANKLIN 170 SKIDDER Thomas Industrial Controls ..... 10 Item ID: 3517 Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22 Email: Austin@lumbermensco.com

Universal Refiner ................... 23 Email: Joe@lumbermensco.com

Lignomat ................................. 24 (C) 931-797-8029

WoodMizer ................................ l (C) 801-362-2170

Contact:POSTMASTER AUSTIN Email: SendAustin@lumbermensco.com address changes to: Phone: 888-401-6367 EXT 703 Lumberman's Exchange (C) 931-797-8029 P.O. Box 1916

is supported on both sides. This

Contact: JOE

Phone: 888-401-6367 EXT 709

Contact: AUSTIN

Phone: 888-401-6367 EXT 703

- USED FORESTRY EQUIPMENT FOR SALE

❘

Contact: AUSTIN

Phone: 888-401-6367 EXT 703

Contact: JOE

Phone: 888-401-6367 EXT 709

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

L O G G I N G

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

(888) 401-6367 ext. 702 sam@lumbermens.co

it includes two sets of Mcdonough

in ve1y good condition, Cuts 130

Contact: AUSTIN Donna Heninger Email: Austin@lumbermensco.com Phone: 888-401-6367REPS EXT 703 EQUIPMENT (C) 931-797-8029 Sam Wall

AD SUBMISSIONS 98′May JOHN DEERE be sent to­640G Item ID: 2694 morris@lumbermens.co

that go up and down, with airbags,

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept CAT 225LC EXCAVATOR Item ID: 5419

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

Contact: AUSTIN bells and whistles, its a production Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 machine, with air strain conveyers (C) 931-797-8029

pressure guides. Top Casting wheel

John Williams (888) 401-6367 ext. 701 02′ JOHN DEERE 640G2 j@lumbermens.co Item ID: 4710

MAILING ADDRESS

90′ TIMBERJACK 240A

feed deck 20 foot out feed deck Item ID: 5082 with 44 inch wheels, and all the

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

MARKETING DIRECTOR

DESIGN DIRECTOR

10 hours on this machine since it has been rebuilt, it has a 24foot in

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com JOHN DEERE 540D INT'L CABLE SKIDDER 72ND ANNUAL GREAT LAKES Item ID: 5249 Item ID: 5568

PUBLISHER

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

with onboard log turners, carriage drive, hyd pac for carriage,

06′ JOHN DEERE 335

sawyers cab, computer controls,

LOGelectronic LOADERdrives for cabinet with Item ID: 5403 carriage knees, husk including

Contact: JOE 48" bottom saw and 36" top saw Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

STACKING RAC JOHN DEERE 440C Item ID: 5242

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net (C) 931-797-8029

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 27

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM “Precision Under Pressure”

‘16 Halverson H140 Skidsteer (DEMO) TIMBERJACK 208 Item ID: 5320

PRENTICE 210B Item ID: 5085

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘93 Barko 180B

Item ID: JW-909632 2022 TIGERCAT Contact: J Williams620H Item ID: 5334x701 Ph: (888) 401-6367

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703 TAJFUN EQUIPMENT Item ID: 5368

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘95 John Deere C6 Tree Farmer

L O G G I N G

‘13 KMC 2500 Track Skidder 13428 Victory 643JLn. // PO Box 124 BELL SUPER T CUTTER Adams Center, Item ID: 4907NY 13606 Item ID: 4952 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID: 14078 13′ BARKOAustin 595ML MAGNUM Contact: Item ID: 4974x703 Ph: (888) 401-6367

capacity!.Item ItemID: ID5358 13421. Sam x702

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 off onto a conveyor. This is a very (C) 931-797-8029

Contact: AUSTIN 1994 Barko 160B - Electric Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 knuckleboom, 30' boom, 75hp (C) 931-797-8029

Sam x702

grapple, 5,000 original hours.

well built processor. Item ID 13820.

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850 TIMBERJACK 1270

Item ID:Item 14073 ID: 5199 Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

TIGERCAT Item ID 04′ 13644.

Sam x702 620 Item 4705 FIREWOOD ID: PROCESSORS

Contact: AUSTIN 2010 Shop Built Wood Processor

Email: Austin@lumbermensco.com - ItPhone: has a 353 Detroit diesel, 40 888-401-6367 EXT 703 931-797-8029 inch insert(C) tooth circle saw, 30 foot

 Issue 364 439

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 2016 TAJFUN 400 JOY

chain conveyer, 8 way splitter, on Item ID: 5227 20,000lb goose neck trailer. Item ID Contact: AUSTIN

13916. x703 Email:Austin Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Best Value Portable Log Splitter (C) 931-797-8029

- Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and

LIEBHERR A312

amp gauges. Cuts logs up to 16”.

WITH RYANS HEAD

One owner and comes with all Item ID: 4979 manuals and receipts. Purchased Contact: AUSTIN

new forAustin@lumbermensco.com $32,500. Item ID 13865.

Email: Phone: 888-401-6367 EXT 703 Sam x702 (C) 931-797-8029

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

18′ JOHN DEERE 753J homemade processor with a 10’ Item ID: 4968 log deck. Has a hydraulic grapple, Contact: AUSTINthat all runs off chain and kicker

Email: Austin@lumbermensco.com ofPhone: a 4 cylinder Mercedes 888-401-6367 EXTpower 703 931-797-8029 unit. Has(C) a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 -

CAT D5H TSK 3412 Caterpillar Diesel engine Item ID: 4939 with 850 HP. 5300 hrs. Mill in

Contact: AUSTINJust finished 10 good condition.

Email: Austin@lumbermensco.com Acre clearing job, ready work!

Phone: 888-401-6367 EXTto 703 (C) 931-797-8029 Remote control.

Big production

 List  seLL  exchange  buy  save

TIMBERJACK 1010

BARKO

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

CAT 538

Item ID 13185. Sam x702 Item ID: 5302 1999 Barko 160D - new engine with Contact: AUSTIN

approximately 1500 hours. Hour Email: Austin@lumbermensco.com

Phone:dont 888-401-6367 EXT 703 meter work. The last 2 owners (C) 931-797-8029

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702 TIMBCO 445EXL Item ID: 5293 BELL

Contact: 1990 BellAUSTIN Super T - This Bell has

Email: Austin@lumbermensco.com

aPhone: brand888-401-6367 new Duetz engine.

EXT 703Lever

931-797-8029 control,(C) 33” bar, pump and tranny

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at Boonville, New York www.LumberMB\ISmagazine.com www.starwebhosting.net/woodsmen/

The Tree

TIMBERJACK 380C that Started

GRAPPLE SKIDDER it All! Item ID: 863

Since 1986, Lumbermens has Contact: SAM published a monthly circular Email: Sam@lumbermensco.com reaching sawmills, loggers, Phone: 888-401-6367 EXT 702 pallet makers, recyclers and (C) 615-596-4148 industrial woodworking plants worldwide.

LOGGING & HEAVY EQUIPMENT EXPO

it includes two sets of Mcdonough

MID-ATLANTIC

LOGGING & BIOMASS EXPO

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

Contact: MOSE Phone: 208-290-1888

Contact:POSTMASTER JOE Email: SendJoe@lumbermensco.com address changes to: Phone: 888-401-6367 EXT 709 Lumberman's Exchange (C) 801-362-2170 P.O. Box 1916

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

’92 TIMBERJACK 450C THE PAUL BUNYAN SHOW Item ID: 1369 Fri, 6 Oct - Sun, 8 Oct Contact: ROBERT Cambridge, Ohio Phone: 606-875-4783 www.ohioforest.org

Item ID 13876. Austin x703 S & W 125 Band Mill with

TIMBCO 425D Caterpillar generator - Low hours Item ID: 1429 on the mill, electronic computer Set

Contact: AUSTIN works,1 1/2" or 2" band, 22ft. track Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 (C) 931-797-8029

hours ready to run. Item ID 13434.

Sam x702

** INFO LINK** B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

JOHN Saw DEERE 550G 29 Menominee .....................

1979 TIMBERJACK 230

Bell's Machining ..................... 27

CABLE SKIDDER Brute Force Mfg. ..................... 31 Item ID: 1072

Phone: 807-631-4081 Corley Mfg .............................. 32

Contact: KYLE

Columbia, TN 38402

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is JD 700J LGP published06′ monthly

by Woods Publishing, Item P.O. Box ID: 1916, 3787 Columbia, TN 38402. All rights Enclosed cab, Winch strong, reserved.

All editorial/ advertorial New sprockets gothewith it, submissions are used at Undercarriage 55%, and Has may no discretion of the publisher mechanical issues, ofbeen taken be edited for purposes clarity of, Although The owner done have with andcare space. allisefforts a project bought it for, Have been made toheensure accuracy of a reliable truckerby available.

Buyer content submitted advertisers pays for trucking, About 80mi and writers, the Lumberman's south of Louisville, KY Exchange, its principles and associates, are not held liable for Contact: JOE errors or Joe@lumbermensco.com omissions. Reproduction, Email: inPhone: whole or part, is prohibited with­ 888-401-6367 EXT 709 out written (C)consent.

801-362-2170 ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

14′Boiler JOHN.............................

DEERE 748H 14 Hurst Item ID: 2707 Iron Bull ................................... 21

JOHN DEERE 648D..... 10 Thomas Industrial Controls Item ID: 547 Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22 Email: Austin@lumbermensco.com

Universal Refiner ................... 23 Email: Sam@lumbermensco.com

Lignomat ................................. 24 (C) 931-797-8029

WoodMizer ................................ l (C) 615-596-4148

Buck Equipment (AIM) ........ 36

Contact: AUSTIN

Phone: 888-401-6367 EXT 703

- USED FORESTRY EQUIPMENT FOR SALE

❘

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal

Carriage line it includes carriage

with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls,

CRAWLERInc DOZER Metal Detector's . .............. 30 Item ID: 5388 Midwest Sharpening.............. 26 Contact: JOE Email: Joe@lumbermensco.com Mor bark ..................................... 9 Phone: 888-401-6367 EXT 709 Multitek(C) ...................................

12 801-362-2170

cabinet with electronic drives for carriage knees, husk including 460 TIMBERJACK Item ID:and 1124 48" bottom saw 36" top saw Contact: MARCUS Phone: 660-833-9061

STACKING RAC TIGERCAT 822 Item ID: 1130

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net (C) 931-797-8029

Contact: SAM

Phone: 888-401-6367 EXT 702

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

L O G G I N G

EXCAVATOR 225 LC Item ID: 1067

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

AD SUBMISSIONS 16′ 700K May beJD sent to­ Item ID: 4343 morris@lumbermens.co

that go up and down, with airbags,

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

LOG LOADER

(888) 401-6367 ext. 702 sam@lumbermens.co

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

PROCESSOR

feed deck 20 foot out feed deck Item ID: 2593 with 44 inch wheels, and all the

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

(888) 401-6367 ext. 701 KNUCKLEBOOM LOADER j@lumbermens.co Item ID: 978 DESIGN DIRECTOR

MAILING ADDRESS

2016 HYPRO 755HB

Contact: AUSTIN bells and whistles, its a production Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 machine, with air strain conveyers (C) 931-797-8029

MARKETING DIRECTOR PRENTICE 384 John Williams

Contact: AUSTIN Donna Heninger Email: Austin@lumbermensco.com Phone: 888-401-6367REPS EXT 703 EQUIPMENT (C) 931-797-8029 Sam Wall

10 hours on this machine since it has been rebuilt, it has a 24foot in

Contact: AUSTIN Contact: AUSTIN 7 Sept - Sat, 9 Sept Email: Austin@lumbermensco.comThurs, Email: Austin@lumbermensco.com Escanaba, Michigan Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 (C) 931-797-8029 (C) 931-797-8029

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com 2009 JOHN DEERE 548G3 725B TIMBERPRO 72ND ANNUAL GREAT LAKES Item ID: 4699 Item ID: 1398

PUBLISHER

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 29

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM “Precision Under Pressure”

TIMBER JACK 450B 04′ JD 450H Item ID: 4327 Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

GRAPPLE SKIDDER Item ID: 5452 Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

‘16 Halverson H140 Skidsteer (DEMO)

‘93 Barko 180B

Item ID: JW-909632 12′ JD 648H Contact: J Williams Item ID: 5253x701 Ph: (888) 401-6367

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703 02′ CASE 650H Item ID: 3511

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

‘95 John Deere C6 Tree Farmer

L O G G I N G

‘13 KMC 2500 Track Skidder 13428 98′ Victory Ln. // PO Box 124 TJ 460 Adams Center, Item ID: 4918NY 13606 Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

JOHN DEERE 848L Item ID: 1184

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID: 14078 15′ TIGERCAT Contact: Austin 610E Item ID: 4944x703 Ph: (888) 401-6367

capacity!.Item ItemID: ID1531 13421. Sam x702

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 off onto a conveyor. This is a very (C) 931-797-8029

Contact: AUSTIN 1994 160B - Electric Email:Barko Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 knuckleboom, 30' boom, 75hp (C) 931-797-8029

Sam x702

grapple, 5,000 original hours.

well built processor. Item ID 13820.

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 03′ JOHN DEERE 4850648G III SKIDDER

Item ID:Item 14073 ID: 5647 Contact: Austin Contact: JOE Ph: (888) 401-6367 x703 Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

90′Sam JD 550G Item ID 13644. x702 Item ID: 3873 FIREWOOD PROCESSORS

Contact: JOE Wood Processor 2010 Shop Built

Email: Joe@lumbermensco.com - ItPhone: has a 353 Detroit diesel, 40 888-401-6367 EXT 709 801-362-2170 inch insert(C) tooth circle saw, 30 foot

 Issue 364 439

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 TJ 450B

chain conveyer, 8 way splitter, on Item ID: 5098 20,000lb goose neck trailer. Item ID Contact: JOE

13916.

Austin x703 Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 Best Value Portable Log Splitter (C) 801-362-2170

- Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

14′ TIGERCAT 720E

One owner and comes with all Item ID: 1617 manuals and receipts. Purchased Contact: AUSTIN

new forAustin@lumbermensco.com $32,500. Item ID 13865.

Email: Phone: 888-401-6367 EXT 703 Sam x702 (C) 931-797-8029

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

JD 648Lwith a 10’ homemade processor Item ID: 5073 log deck. Has a hydraulic grapple, Contact: JOE chain and kicker that all runs off

Email: Joe@lumbermensco.com ofPhone: a 4 cylinder Mercedes 888-401-6367 EXTpower 709 801-362-2170 unit. Has(C) a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

’95 JOHN DEERE 2004 Bandit Beast Model 4680 548G II SKIDDER 3412 Caterpillar Diesel engine Item ID: 5605 with 850 HP. 5300 hrs.

Mill in

Contact: JOE good condition.

Just finished 10

Email: Joe@lumbermensco.com Acre clearing job, ready work!

Phone: 888-401-6367 EXTto 709 801-362-2170 Remote (C) control.

Big production

 List  seLL  exchange  buy  save

JOHN DEERE 643K

BARKO

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

92′ CAT D5H

Item ID 13185. Sam x702 Item ID: 4678 1999 Barko 160D - new engine with Contact: JOE

approximately 1500 hours. Hour Email: Joe@lumbermensco.com

Phone:dont 888-401-6367 EXT 709 meter work. The last 2 owners (C) 801-362-2170

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702 JOHN DEERE 753J Item ID: 1582 BELL

Contact: 1990 BellAUSTIN Super T - This Bell has Email: Austin@lumbermensco.com a brand new Duetz engine.

Phone: 888-401-6367 EXT 703Lever 931-797-8029 control,(C) 33” bar, pump and tranny

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at Boonville, New York www.LumberMB\ISmagazine.com www.starwebhosting.net/woodsmen/

The Tree that Started 98′itCAT All! 515

Item ID: 4671 Since 1986, Lumbermens has Contact: JOE published a monthly circular Email: Joe@lumbermensco.com reaching sawmills, loggers, Phone: 888-401-6367 EXT 709 pallet makers, recyclers and (C) 801-362-2170 industrial woodworking plants worldwide.

LOGGING & HEAVY EQUIPMENT EXPO

Contact: JOE Contact: AUSTIN Thurs, 7 Sept - Sat, 9 Sept Email: Joe@lumbermensco.com Email: Austin@lumbermensco.com Escanaba, Michigan Phone: 888-401-6367 EXT 709 Phone: 888-401-6367 EXT 703 (C) 801-362-2170 (C) 931-797-8029

MID-ATLANTIC

LOGGING & BIOMASS EXPO

is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx 04′ TIMBERJACK 460D Item ID: 2724

Item ID 13876. Austin x703 S & W 125 Band Mill with

98′ JOHN DEERE 648hours Caterpillar generator - Low Item ID: 2798 on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Contact: AUSTIN Fri,Email: 6 Oct - Sun, 8 Oct Austin@lumbermensco.com

Contact: AUSTIN works,1 1/2" or 2" band, 22ft. track Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 (C) 931-797-8029

Phone: 888-401-6367 Cambridge, Ohio EXT 703 (C) 931-797-8029 www.ohioforest.org

hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

Bell's Machining ..................... 27 Item ID: 2646 Brute Force Mfg. ..................... 31

04′Detector's JOHN DEERE 648G330 Metal Inc. ..............

Item ID: 2791 Midwest Sharpening.............. 26

Email:Equipment Austin@lumbermensco.com Buck (AIM) ........ 36

Email: Austin@lumbermensco.com Mor bark ..................................... 9

Corley (C) Mfg .............................. 32 931-797-8029

Multitek(C) ...................................

12 931-797-8029

Columbia, TN 38402

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers 99′ FRANKLIN 170 and writers, the Lumberman's Item ID: 4586 Exchange, its principles and associates, Contact: are JOEnot held liable for errors or Joe@lumbermensco.com omissions. Reproduction, Email: inPhone: whole or part, is prohibited with­ 888-401-6367 EXT 709 out written (C)consent.

801-362-2170 ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

15′ CAT 525D Hurst Boiler .............................

14 Item ID: 3172 Iron Bull ................................... 21

CLARK F666Controls RANGER Thomas Industrial ..... 10 Item ID: 3233 Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22 Email: Joe@lumbermensco.com

Universal Refiner ................... 23 Email: Joe@lumbermensco.com

Lignomat ................................. 24 (C) 801-362-2170

WoodMizer ................................ l (C) 801-362-2170

Contact:POSTMASTER JOE Email: SendJoe@lumbermensco.com address changes to: Phone: 888-401-6367 EXT 709 Lumberman's Exchange (C) 801-362-2170 P.O. Box 1916

is supported on both sides. This

2013 JOHN DEERE 848H

Contact: AUSTIN

Phone: 888-401-6367 EXT 703

Contact: JOE

Phone: 888-401-6367 EXT 709

- USED FORESTRY EQUIPMENT FOR SALE

❘

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal

Carriage line it includes carriage

with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls,

02′ electronic TJ 660D drives for cabinet with Item ID: 4088 carriage knees, husk including

Contact: AUSTIN

Contact: JOE 48" bottom saw and 36" top saw Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Phone: 888-401-6367 EXT 703

STACKING RAC 12′ TIGERCAT 620D Item ID: 2753

Contact: JOE

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net (C) 931-797-8029

Phone: 888-401-6367 EXT 709

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

L O G G I N G

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

(888) 401-6367 ext. 702 sam@lumbermens.co

it includes two sets of Mcdonough

in ve1y good condition, Cuts 130

Contact: JOE Donna Heninger Email: Joe@lumbermensco.com Phone: 888-401-6367REPS EXT 709 EQUIPMENT (C) 801-362-2170 Sam Wall

AD SUBMISSIONS 02′be CAT 525B May sent to­ Item ID: 3214 morris@lumbermens.co

that go up and down, with airbags,

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept 06′ TIGERCAT 635C Item ID: 3322

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

Contact: JOE bells and whistles, its a production Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 machine, with air strain conveyers (C) 801-362-2170

pressure guides. Top Casting wheel

John Williams (888) 401-6367 ext. 701 TJ 460D j@lumbermens.co Item ID: 3286

MAILING ADDRESS

00′ JD 748G III

feed deck 20 foot out feed deck Item ID: 3210 with 44 inch wheels, and all the

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

MARKETING DIRECTOR

DESIGN DIRECTOR

10 hours on this machine since it has been rebuilt, it has a 24foot in

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com 2004 JOHN DEERE 648G3 13′ JD 648H 72ND ANNUAL GREAT LAKES Item ID: 2628 Item ID: 3589

PUBLISHER

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 31

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM “Precision Under Pressure”

‘16 Halverson H140 Skidsteer (DEMO) 83′ TJ 380A Item ID: 2133 Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

13′ CAT 545C Item ID: 2117 Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

‘93 Barko 180B

Item ID: JW-909632 08′ JDJ 535 SERIES II Contact: Williams Item ID: 4580x701 Ph: (888) 401-6367

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703 10′ JOHN DEERE 648H Item ID: 1847

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘95 John Deere C6 Tree Farmer

L O G G I N G

‘13 KMC 2500 Track Skidder 13428 Victory Ln. // PO Box 124 CAT 515 Adams Center, Item ID: 1739NY 13606 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

04′ JD 435 II Item ID: 4169

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 CAT 515 x703 Item ID: 1509

‘83 John Deere 4850

15′ CAT 559C LOADER Item ID: 14073 Item ID: 5534 Contact: Austin Contact: JOE Ph: (888) 401-6367 x703

Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 801-362-2170 with 1700(C) hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

TIMBERJACK 240A in excellent condition. Runs great.

Item IDGRAPPLE 13644. SamSKIDDER x702 Item ID: 1769 FIREWOOD PROCESSORS

Contact: AUSTIN 2010 Shop Built Wood Processor

Email: Austin@lumbermensco.com - ItPhone: has a 353 Detroit diesel, 40 888-401-6367 EXT 703 931-797-8029 inch insert(C) tooth circle saw, 30 foot

 Issue 364 439

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 17′ JD 437E chain conveyer, 8 way splitter, on Itemneck ID: 4809 20,000lb goose trailer. Item ID Contact: JOE x703 13916.

Austin

Email: Joe@lumbermensco.com Best Value Portable Log Splitter Phone: 888-401-6367 EXT 709 (C) 801-362-2170 - Small manufacturer in PA has

made the best valued log splitter.

Sam x702

grapple, 5,000 original hours.

Contact: ERVIN

well built processor. Item ID 13820.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

TIMBERJACK 460

One owner and comes with all Item ID: 1777 manuals and receipts. Purchased Contact: AUSTIN

new forAustin@lumbermensco.com $32,500. Item ID 13865.

Email: Phone: 888-401-6367 EXT 703 Sam x702 (C) 931-797-8029

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

TIGERCAT homemade processor630E with a 10’ Item ID: 1098 log deck. Has a hydraulic grapple, Contact: AUSTINthat all runs off chain and kicker

Email: Austin@lumbermensco.com ofPhone: a 4 cylinder Mercedes 888-401-6367 EXTpower 703 931-797-8029 unit. Has(C) a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

BARKO

off onto (641) a conveyor.

This is a very Phone: 229-1012

Handles logs up to 32”. Uses

13HP Honda motor. Manual start

04′ TIMBERJACK 460D

capacity!.Item ItemID: ID5445 13421. Sam x702 Contact: JOE 1994 Barko 160B - Electric Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 knuckleboom, 30' boom, 75hp (C) 801-362-2170

Firewood Processor - This is

‘05 Gehl CTL 70

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 -

13′ TIGERCAT 234 3412 Caterpillar Diesel engine Item ID: 4803 with 850 HP. 5300 hrs. Mill in

Contact: JOE good condition.

Just finished 10

Email: Joe@lumbermensco.com Acre clearing job, ready work!

Phone: 888-401-6367 EXTto 709 801-362-2170 Remote (C) control.

Big production

 List  seLL  exchange  buy  save

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

00′ TIGERCAT 245

Item ID 13185. Sam x702 Item ID: 4685 1999 Barko 160D - new engine with Contact: JOE

approximately 1500 hours. Hour Email: Joe@lumbermensco.com

Phone:dont 888-401-6367 EXT 709 meter work. The last 2 owners (C) 801-362-2170

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702 95′ PRENTICE 210E Item ID: 3628 BELL

Contact: 1990 BellJOE Super T - This Bell has Email: Joe@lumbermensco.com

aPhone: brand888-401-6367 new Duetz engine.

EXT 709Lever

801-362-2170 control,(C) 33” bar, pump and tranny

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at Boonville, New York www.LumberMB\ISmagazine.com www.starwebhosting.net/woodsmen/

The Tree that Started 98′ PRENTICE it All! 280

Item ID: 2166 Since 1986, Lumbermens has Contact: JOE published a monthly circular Email: Joe@lumbermensco.com reaching sawmills, loggers, Phone: 888-401-6367 EXT 709 pallet makers, recyclers and (C) 801-362-2170 industrial woodworking plants worldwide.

JOHN DEERE 1010D LOGGING & HEAVY EQUIPMENT EXPO Contact: JOE Item ID: 1715 Thurs, 7 Sept - Sat, 9 Sept

MARKETING DIRECTOR

DESIGN DIRECTOR

Contact: AUSTIN Donna Heninger Email: Austin@lumbermensco.com Phone: 888-401-6367REPS EXT 703 EQUIPMENT (C) 931-797-8029 Sam Wall

MID-ATLANTIC

LOGGING & BIOMASS EXPO

AD SUBMISSIONS 2014 PONSSE SCORPION May be sent to­ KING Item ID: 4914 morris@lumbermens.co

that go up and down, with airbags, it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

S & W 125 Band Mill with

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN works,1 1/2" or 2" band, 22ft. track Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 (C) 931-797-8029

Item ID 13876. Austin x703

08′ TIMBCO 415EX Caterpillar generator - Low hours Item ID: 1661 on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Contact: JOE Fri,Email: 6 Oct - Sun, 8 Oct Joe@lumbermensco.com Phone: 888-401-6367 Cambridge, Ohio EXT 709 (C) 801-362-2170 www.ohioforest.org

hours ready to run. Item ID 13434.

Sam x702

** INFO LINK** B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

Bell's Machining ..................... 27 Item ID: 1480 Brute Force Mfg. ..................... 31

14′Detector's JOHN DEERE 437D 30 Metal Inc. ..............

Item ID: 2740 Midwest Sharpening.............. 26

Email:Equipment Austin@lumbermensco.com Buck (AIM) ........ 36

Email: Austin@lumbermensco.com Mor bark ..................................... 9

Corley (C) Mfg .............................. 32 931-797-8029

Multitek(C) ...................................

12 931-797-8029

Columbia, TN 38402

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers VALMET 840.2 FORWARDER and writers, the Lumberman's ID: 741 Exchange, itsItem principles and associates, are not held liable for Contact: AUSTIN errors or Austin@lumbermensco.com omissions. Reproduction, Email: inPhone: whole or part, is prohibited with­ 888-401-6367 EXT 703 out written (C)consent.

931-797-8029 ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

MORBARK 6036 CHIPPER14 Hurst Boiler .............................

Item ID: 1084 Iron Bull ................................... 21

JOHN DEERE 1270..... 10 Thomas Industrial Controls Item ID: 1350 Union Grove Saw & Knife.. 2, 37

Contact:POSTMASTER AUSTIN Email: SendAustin@lumbermensco.com address changes to: Phone: 888-401-6367 EXT 703 Lumberman's Exchange (C) 931-797-8029 P.O. Box 1916

Contact: AUSTIN bells and whistles, its a production Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 machine, with air strain conveyers (C) 931-797-8029

Lexington, Kentucky 2004 PONSSE ERGO http://www.kfia.org/ KOBELCO 250 LOG LOADER KentuckyWoodExpo.aspx HARVESTER Item ID: 2584 Item ID: 2656

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

2004 PRENTICE 384

feed deck 20 foot out feed deck Item ID: 2637 with 44 inch wheels, and all the

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

(888) 401-6367 ext. 702 sam@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

VALMET 644

Contact: AUSTIN

Phone: 888-401-6367 EXT 703

Contact: SAM Kilgore Saw ............................. 22 Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 Lignomat ................................. 24 (C) 615-596-4148

- USED FORESTRY EQUIPMENT FOR SALE

❘

Contact: AUSTIN

Phone: 888-401-6367 EXT 703

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

with onboard log turners, carriage drive, hyd pac for carriage,

MORBARK MODEL 20

sawyers cab, computer controls,

CHIPHARVESTER cabinet with electronic drives for Item ID: 1246 carriage knees, husk including

Contact: SAM 48" bottom saw and 36" top saw Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 (C) 615-596-4148

STACKING RAC JOHN DEERE 85D Item ID: 1035

Contact: AUSTIN Universal Refiner ................... 23 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 WoodMizer ................................ l (C) 931-797-8029

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

L O G G I N G

John Williams (888) 401-6367 ext. 701 VALMET 840.4 j@lumbermens.co Item ID: 1222

Email: Joe@lumbermensco.com Escanaba, Michigan Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: JAKE Phone: (440) 537-5124

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com 08 ROTTNE H14 72ND ANNUAL GREAT LAKES Item ID: 2062

PUBLISHER

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

Contact: RON www.BakerProducts.net Phone: (606) 595-1734

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 33

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM “Precision Under Pressure”

ROTOSAW CUTTER Item ID: 3144

Item ID: JW-909632 JD 843J Contact:08′ J Williams Item ID: 2109x701 Ph: (888) 401-6367

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

L O G G I N G

84′ CAT 518

‘95 John Deere C6 Tree Farmer

13428 Victory Ln.724 // PO 15′ TIGERCAT G Box 124 Adams Center, Item ID: 3392NY 13606 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

15′ CAT 553C FELLER BUNCHER Item ID: 5495

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

‘13 KMC 2500 Track Skidder

‘05 Gehl CTL 70

‘83 John Deere 2018 WOODMIZER 4850 LT-50 SUPER

Item ID:Item 14073 ID: 5519 Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

2020condition.

WOODMIZER in excellent Runs great.

LT-40 Item ID 13644.

SamWIDE x702 Item ID: 5549 FIREWOOD PROCESSORS

Contact: AUSTIN 2010 Shop Built Wood Processor

Email: Austin@lumbermensco.com - ItPhone: has a 353 Detroit diesel, 40 888-401-6367 EXT 703 931-797-8029 inch insert(C)tooth circle saw, 30 foot

 Issue 364 439

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 2019 WOODMIZER LT-70 SUPER WIDE

chain conveyer, 8 way splitter, on Item ID: 5641 20,000lb goose neck trailer. Item ID Contact: AUSTIN

13916.

Austin x703 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Best Value Portable Log Splitter (C) 931-797-8029

- Small manufacturer in PA has

made the best valued log splitter.

capacity!.Item ItemID: ID2046 13421. Sam x702

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 off onto a conveyor. This is a very (C) 931-797-8029

Contact: JOE 1994 Barko 160B - Electric Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 knuckleboom, 30' boom, 75hp (C) 801-362-2170

Sam x702

grapple, 5,000 original hours.

well built processor. Item ID 13820.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and

2022 WOODMIZER LT-40

amp gauges. Cuts logs up to 16”.

SUPER WIDE HD

One owner and comes with all Item ID: 5612 manuals and receipts. Purchased Contact: AUSTIN

new forAustin@lumbermensco.com $32,500. Item ID 13865.

Email: Phone: 888-401-6367 EXT 703 Sam x702 (C) 931-797-8029

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

2016 WOODMIZER LT-40HD homemade processor with a 10’ Item ID: 5632 log deck. Has a hydraulic grapple, Contact: AUSTINthat all runs off chain and kicker

Email: Austin@lumbermensco.com ofPhone: a 4 cylinder Mercedes 888-401-6367 EXTpower 703 931-797-8029 unit. Has(C) a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Item ID: 14078 17′ JOHN DEERE 843L Contact: Austin Item ID: 2731x703 Ph: (888) 401-6367

Firewood Processor - This is

S A W M I L L

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703 05′ HYDRO-AX 721E Item ID: 3644

12′ JD 643K Item ID: 4896 Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

‘16 Halverson H140 Skidsteer (DEMO)

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

GO FASTBeast RUN AROUND 2004 Bandit Model 4680 SYSTEM 3412 Caterpillar Diesel engine Item ID: 1200 with 850 HP. 5300 hrs.

Mill in

Contact: AUSTINJust finished 10 good condition.

Email: Austin@lumbermensco.com Acre clearing job, ready work!

Phone: 888-401-6367 EXTto 703 (C) 931-797-8029 Remote control.

Big production

 List  seLL  exchange  buy  save

07′ TIMBCO 445EXL

BARKO

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

TIMBERKING B20 SAWMILL

Item ID 13185. Sam x702 Item ID: 5559 1999 Barko 160D - new engine with Contact: AUSTIN

approximately 1500 hours. Hour Email: Austin@lumbermensco.com

Phone:dont 888-401-6367 EXT 703 meter work. The last 2 owners (C) 931-797-8029

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

13′ WOODMIZER LT-3000 Runs Great!. Item ID 13740.

Sam x702

OPERATION

Item ID: 5007 BELL

Contact: 1990 BellAUSTIN Super T - This Bell has

Email: Austin@lumbermensco.com

aPhone: brand888-401-6367 new Duetz engine.

EXT 703Lever

931-797-8029 control,(C) 33” bar, pump and tranny

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at Boonville, New York www.LumberMB\ISmagazine.com www.starwebhosting.net/woodsmen/

The Tree that Started 09′ WOODMIZER LT 300 it All!

Item ID: 4549 Since 1986, Lumbermens has Contact: JOE published a monthly circular Email: Joe@lumbermensco.com reaching sawmills, loggers, Phone: 888-401-6367 EXT 709 pallet makers, recyclers and (C) 801-362-2170 industrial woodworking plants worldwide.

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

it includes two sets of Mcdonough

MID-ATLANTIC

LOGGING & BIOMASS EXPO

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact:POSTMASTER JOE Email: SendJoe@lumbermensco.com address changes to: Phone: 888-401-6367 EXT 709 Lumberman's Exchange (C) 801-362-2170 P.O. Box 1916

Columbia, TN 38402

feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx CORNELL SIZER Item ID: 1322

Item ID 13876. Austin x703 S & W 125 Band Mill with

2007 TIMBERKING B20hours Caterpillar generator - Low Item ID: 5540 on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Contact: SAM Fri,Email: 6 Oct - Sun, 8 Oct Sam@lumbermensco.com

Contact: AUSTIN works,1 1/2" or 2" band, 22ft. track Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 (C) 931-797-8029

Phone: 888-401-6367 Cambridge, Ohio EXT 702 (C) 615-596-4148 www.ohioforest.org

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

Bell's Machining ..................... 27 Item ID: 2419 Brute Force Mfg. ..................... 31

LT40 WOODMIZER

2019 TIMBERKING 200030 Metal Detector's Inc. ..............

Item ID: 5508 Midwest Sharpening.............. 26

Email:Equipment Joe@lumbermensco.com Buck (AIM) ........ 36

Email: Austin@lumbermensco.com Mor bark ..................................... 9

Corley (C) Mfg .............................. 32 801-362-2170

Multitek(C) ...................................

12 931-797-8029

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

Contact: JOE

Phone: 888-401-6367 EXT 709

Buying?

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

is an extremely accurate machine

hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

19′ MORGAN MILITARY AD SUBMISSIONS NOTCHING BAND May be sent to­SAW Item ID: 3567 morris@lumbermens.co

is supported on both sides. This

Contact: AUSTIN

Phone: 888-401-6367 EXT 703

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls,

HURDLE SAWMILL cabinet with electronic drives for Item ID: 4949 carriage knees, husk including

Contact: AUSTIN 48" bottom saw and 36" top saw Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

STACKING RAC

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

2006 WOODMIZER LT-40

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

SUPER HD PORTABLE SAWMILL Item ID: 5425

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

Selling?

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net (C) 931-797-8029

lumbermensco.com • 888.401.6367

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

S A W M I L L

Contact: JOE Donna Heninger Email: Joe@lumbermensco.com Phone: 888-401-6367REPS EXT 709 EQUIPMENT (C) 801-362-2170 Sam Wall

(888) 401-6367 ext. 702 sam@lumbermens.co

that go up and down, with airbags,

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

2017 TIMBERKING 2200 Item ID: 5513

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

SAWMILL

feed deck 20 foot out feed deck Item ID: 5559 with 44 inch wheels, and all the

Contact: AUSTIN bells and whistles, its a production Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 machine, with air strain conveyers (C) 931-797-8029

(888) 401-6367 ext. 701 DEBARKER j@lumbermens.co Item ID: 3329

MAILING ADDRESS

TIMBERKING B20

LOGGING & HEAVY EQUIPMENT EXPO

MARKETING DIRECTOR EARLY 90’S MELLOTT John Williams DESIGN DIRECTOR

10 hours on this machine since it has been rebuilt, it has a 24foot in

Contact: AUSTIN Contact: AUSTIN 7 Sept - Sat, 9 Sept Email: Austin@lumbermensco.comThurs, Email: Austin@lumbermensco.com Escanaba, Michigan Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 (C) 931-797-8029 (C) 931-797-8029

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com FENCE POST PROCESSING 2014 BAKER 13′ SAWMILL 72ND ANNUAL GREAT LAKES Item ID: 1231 Item ID: 4910

PUBLISHER

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 35

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM “Precision Under Pressure”

‘16 Halverson H140 Skidsteer (DEMO)

FULL OPERATION Item ID: 5274

17′ COOKS AC36 SAWMILL Item ID: 5019

Item ID: JW-909632 TAJFUNJ Williams 480 PLUS JOY Contact: Item ID: 568x701 Ph: (888) 401-6367

Item ID: 14077 Contact: Austin 6HEAD Ph:EDMISTON (888) 401-6367 x703 BLOCK SAW Item ID: 5342

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

S A W M I L L S

BAKER DOMINATOR

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder

2019 WOODMIZER LT-70 13428 VictoryWIDE Ln. // PO Box 124 2017 HURDLE SAWMILL SUPER Adams Center, Item ID: 5191NY 13606 Item ID: 5025 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘05 Gehl CTL 70

‘83 John Deere 485001′ MACK RD688

Item ID:Item 14073 ID: 4479 Contact: Austin Contact: JOE Ph: (888) 401-6367 x703 Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

NYLE FIREWOOD Item ID 13644.

Sam x702DRY KILN Item ID: 3588

FIREWOOD PROCESSORS

Contact: AUSTIN 2010 Shop Built Wood Processor

Email: Austin@lumbermensco.com - ItPhone: has a 353 Detroit diesel, 40 888-401-6367 EXT 703 931-797-8029 inch insert(C) tooth circle saw, 30 foot

 Issue 364 439

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 MACK TRUCK WITH HOOD LOADER

chain conveyer, 8 way splitter, on Item ID: 1089 20,000lb goose neck trailer. Item ID Contact: SAM

13916. x703 Email:Austin Sam@lumbermensco.com Phone: 888-401-6367 EXTSplitter 702 Best Value Portable Log (C) 615-596-4148

- Small manufacturer in PA has

made the best valued log splitter.

capacity!.Item ItemID: ID5013 13421. Sam x702

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 off onto a conveyor. This is a very (C) 931-797-8029

Contact: AUSTIN 1994 Barko 160B - Electric Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 knuckleboom, 30' boom, 75hp (C) 931-797-8029

Sam x702

grapple, 5,000 original hours.

well built processor. Item ID 13820.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

WINCH FOR SALE

One owner and comes with all Item ID: 5413 manuals and receipts. Purchased Contact: AUSTIN

new forAustin@lumbermensco.com $32,500. Item ID 13865.

Email: Phone: 888-401-6367 EXT 703 Sam x702 (C) 931-797-8029

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

WARRATAH FS20a 10’ homemade processor with Item ID: 2100 log deck. Has a hydraulic grapple, Contact: JOE chain and kicker that all runs off

Email: Joe@lumbermensco.com ofPhone: a 4 cylinder Mercedes 888-401-6367 EXTpower 709 801-362-2170 unit. Has(C) a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Item ID: 14078 PRECISION 742H DEBARKER Contact: Austin Item ID: 5350x703 Ph: (888) 401-6367

Firewood Processor - This is

M I S C E L L A N E O U S

‘93 Barko 180B

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

INTERNATIONAL 2004 98′ Bandit Beast Model 4680 LOG TRUCK 3412 Caterpillar Diesel engine Item ID: 5057 with 850 HP. 5300 hrs.

Mill in

Contact: AUSTINJust finished 10 good condition.

Email: Austin@lumbermensco.com Acre clearing job, ready work!

Phone: 888-401-6367 EXTto 703 931-797-8029 Remote (C) control.

Big production

 List  seLL  exchange  buy  save

16′ COOKS AE4P EDGER

BARKO

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in

GREAT LAKES LOG TRAILER

kohing head. head works great.

SERCO 7000

Item ID 13185. Sam x702 Item ID: 1946 1999 Barko 160D - new engine with Contact: AUSTIN

approximately 1500 hours. Hour Email: Austin@lumbermensco.com

Phone:dont 888-401-6367 EXT 703 meter work. The last 2 owners (C) 931-797-8029

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

LOG MAX 7000 Item ID: 1051 BELL

Contact: 1990 BellAUSTIN Super T - This Bell has

Email: Austin@lumbermensco.com

aPhone: brand888-401-6367 new Duetz engine.

EXT 703Lever

931-797-8029 control,(C) 33” bar, pump and tranny

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 37

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

AD DIRECTORY

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 439

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

Air Systems Mfg.............................16................................ 828-757-3500 Anson................................................17................................ 800-663-7723 B & B Mfg........................................13................................ 716-373-5881 B. H. Payne......................................23................................ 800-752-0627 ‘93 Barko 180B Brute Force Firewood Equip......10................................ 715-678-0037 ‘16 Halverson H140 Item ID: 14077 Buck Equipment (AIM)..................23................................

800-803-3365 Contact: Austin Skidsteer (DEMO) Cord King.........................................4. ..............................888-219-WOOD Ph: (888) 401-6367 x703 Item ID: Corley Mfg.JW-909632 ......................................19................................ 423-698-0284 Contact: J Williams CW Mill............................................8, 10, 39..................... 800-743-3491 Ph: Mfg..

(888).........................................21................................

401-6367 x701 F&R 800-355-1250 Great Lakes Logging Expo............16................................ 715-304-2861 Great Lakes Mfg.............................18................................ 877-248-5677 Holtec...............................................3.................................... holtecusa.com Hud-Son Forest Equipment.........1................................. 800-765-SAWS Hurdle Machine Works Inc..........40................................ 901-877-6251 Hurst Boiler.....................................22................................ 877-774-8778 ‘95 John Deere C6 Industrial Seating ..........................23................................

503-266-6885 James G. Murphy Auction............7..........................murphyauction.com Tree Farmer Kilgore Saw Company...................21................................ 888-857-5153 Item ID: 13920 Lignomat..........................................18................................

800-227-2105 Contact: Austin ‘13 KMC 2500 Track Lumbermens Wanted....................37................................

931-797-8029 Ph: (888) 401-6367 x703 SkidderSaw.............................23................................

Menominee 800-582-0470 Metal ItemDetectors, ID: 14078Inc......................21................................ 541-345-7454 Contact: Austin ....................20................................

Midwest Sharpening capacity!. Item ID231-924-5953 13421. Sam x702 Ph: (888) 401-6367 x703 Multitek North America, LLC......20................................ 800-243-5438 BARKO Northeast Implements, Inc..........16................................ 607-589-6160 1994 Barko 160B -800-211-9468 Electric Pantron Automation, Inc..............38................................ off onto a conveyor.

This is a very knuckleboom, 30'888-38-TREES boom, 75hp Paul Bunyan Show.........................11................................ well built processor.

Item ID 13820. .................................. motor, Rotobec continuous Piper’s Saw Shop............................8.

800-845-6075 Prolenc 877-563-8899 Sam x702Manufacturing Inc..........14................................ grapple, 5,000 original hours.

Row Electric....................................20................................

800-248-4479 Firewood Processor - This is (excellent condition.). Item ID Ryan's Equipment...........................12................................ 989-427-2829 a Chomper Model 16 PDA 13238. Chris x700 SFPA Expo.......................................18.............................. SFPAEXPO.com automatice firewood processor 1995 Barko 775 B Feller Buncher Smith Machine Worx.....................15................................ 205-620-4455 with John Deere power unit with - Pumps recently redone. 400 hrs Smith Sawmill Service...................2...................................

800-598-6344 low hours. Control panelEquip.......6, includes 9.............................. on injection pump. always started TimberWolf Firewood 607-307-4029 tach, oilSeats.....................................13................................ pressure, water temp and good. in good working order. 22in Tough 855-579-0538 PLEASE PRINT amp gauges.

Cuts logs up to 16”.

SEPTEMBER 2024 kohing head. head works great.

you to Change your Address One If owner andneed comes with all Item ID 13185.

Sam x702 or

Addand Your Name to our1999 mailing list, manuals receipts.

Purchased Barko 160D - newthen engine with please complete this form and mail to:

new for $32,500. Item ID 13865.

Sam x702

approximately 1500 hours. Hour

Lumbermens™meter Magazine dont work. The last 2 owners 1116 W 7th St., Ste. 297 LOGGING EQUIPMENT have only used it to load trucks or Columbia, TN 38402

Handles logs up to 32”. Uses

BANDIT as a backup as needed. Has a CTR ❑ Please Add ❑ Please Change ❑ grapple Pleasehas Remove 1999 Bandit 1900 Tracked Disc delimber, been rebuilt.

but electronic option is available.

50% or better. 475 hp Cummins Item ID 13694. Sam x702 Company Name*:_________________________________________________________

made the best valued log splitter.

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under at required Boom have minor leaks. *Company nameCarriage and address to cylinders process your change.

Diesel. 7500 Hours. One owner.

94 Barko 275 - Excellent value

Individual Name:__________________________________________________________

Well maintained. Item ID 13294.

with low at hours at 3,500. 5.9

Address:_________________________________________________________________

Sam x702

CUMMINS continuous grapple.

_______________________________________________________________________

2004 Bandit Beast Model 4680 -

Runs Great!. Item ID 13740. Sam

City:____________________________________________________________________ 3412 Caterpillar Diesel engine x702 State:___________________________________________________________________ with 850 HP. 5300 hrs. Mill in BELL Zip:_____________________________________________________________________ good condition. Just finished 10 1990 Bell Super T - This Bell has

Acre clearing job, ready to work! a brand new Duetz engine. Lever Phone:__________________________________________________________________

Remote control. Big production control, 33” bar, pump and tranny Email:___________________________________________________________________

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

Boonville, New York www.starwebhosting.net/woodsmen/

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com ®

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

Danckaert Band Resaw - Roughly

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

John Williams (888) 401-6367 ext. 701 j@lumbermens.co CW has been manufacturing top quality electric

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours

and diesel powered grinders for OVER 40 YEARS! THE PAUL BUNYAN SHOW DESIGN DIRECTOR

on the mill, electronic computer Set

HogZilla Model Cat 3406 140KW Genset, 12,400 TCII-1564P

Donna Heninger Fri, 6 Oct - Sun, 8 Oct We believe in SERVICE AFTER THE SALE! CW Mill’s CUSTOMER Cambridge, Ohio EQUIPMENT REPS SUPPORT AND PARTS availability is TOP RATED in the industry!

Sam Wall www.ohioforest.org

(888) 401-6367 ext. 702 sam@lumbermens.co

hours ready to run. Item ID 13434.

Sam x702 Connect With Us!

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

works,1 1/2" or 2" band, 22ft. track

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 39

LUMBERMENS™ MAGAZINE 1116 West 7th Street, Suite 297 Columbia, Tennessee 38401