Lumbermens September 2021 Magazines

F R E E

E Q U I P M E N T

L I S T I N G S

-

P G

6

SEPTEMBER 2021 TM

pg.30>>

PORTABLE ONE MAN SAWMILL

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

COMPLETE UNITS STARTING AT $11,000 CALL TODAY! ‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

AUTOMATED WARRIOR SWING BLADE Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: $ J Williams Ph: (888) 401-6367 x701

STARTING AT 12,500 ‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

automatice firewood processor

with John Deere power unit with

tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

STARTING AT $11,000

low hours. Control panel includes

Handles logs up to 32”. Uses

MANUAL WARRIOR SWING BLADE Item ID 13644. Sam x702

a Chomper Model 16 PDA

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 -

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam

x702 DEDICATED SLABBER

3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

ORDER NOW FOR THE NEXT DELIVERY

- It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 403

of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Acre clearing job, ready to work!

a brand new Duetz engine. Lever

1-800-598-6433 | SAWMILL.SHOP

Lumbermens™  since 1986

❘

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

it includes two sets of Mcdonough pressure guides. Top Casting wheel

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 3

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

Grapple Assist for crooked logs

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

2019 Cord King Line-up

Email: info@cordking.ca Web: www.cordking.ca ‘13 KMC 2500 Track Skidder

‘95 John Deere C6 Tree Farmer Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

TOLL FREE 1-888-219-WOOD (9663) Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’

a Chomper Model 16 PDA

automatice firewood processor

Item ID: JW-986495 withsplitter John Deere power unit with • Wedge and Contact: J Williams design tolow hours.

Control panel includes suit your Ph: (888) 401-6367 x701

needs tach, oil pressure, water temp and • 24 to 72 ton splitting amp gauges.

Cuts logs up to 16”. capability One owner and comes with all chain conveyer, 8 way splitter, on • trailer.

The splitting 20,000lb goose neck Itemfastest ID manuals and receipts. Purchased cycle time on the 13916. Austin x703 new for $32,500. Item ID 13865. planet. Sam x702 Best Value Portable Log Splitter

Facts to consider:

- Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

1. Pioneered N. America’s first commercialChipper firewood processor in the mid 70’s 13HP Honda motor. Manual start - Cat Under Carriage at Boom cylinders have minor leaks.

drum design. Can easily load 42’

vans and produce 6 - 8 saw loads per but electronic option is available.M2030 50% orand better.M2430 475 hp Cummins 2. 3 Bar models available M1820, day. Item ID 13882. Austin x703

Has Log Lift. Uses 4-way wedge

Diesel. 7500 Hours. One owner.

Brewco Saws - Two Brewco Saws

Value! PA. Item ID 12062. Sam x702

Sam x702

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

3. 7 Slasher Available Model 44, 44HO, 48, 54 & 60low at hours at 3,500. 5.9 EDGERS & GANGS Saw Models adjustable to single two way.

Great 36, Well 40, maintained.

Item ID 13294. with

CUMMINS continuous grapple.

4. The Most productive machine on the planet, proven and guaranteed Firewood Processor - This is a 2004 Bandit Beast Model 4680 Runs Great!. Item ID 13740. Sam

in excellent condition. Runs great.

Item ID 13644. Sam x702

homemade processor with a 10’ 3412 Caterpillar Diesel engine x702 5. Go to our web site for live action video and details www.cordking.ca FIREWOOD PROCESSORS log deck. Has a hydraulic grapple, with 850 HP. 5300 hrs. Mill in BELL 2010 Shop 6.

Built Wood Processor chain andjoystick kicker that all runs off good condition. Just finished 10 1990 Bell Super T - This Bell has Available with single control - It has a 353 Detroit diesel, 40

of a 4 cylinder Mercedes power

Acre clearing job, ready to work!

a brand new Duetz engine. Lever

7. Exclusive lifetime splitter warranty and Remote 1 year bumper to bumper warranty. control. Big production control, 33” bar, pump and tranny unit. Has a 4’ chain saw that kicks

inch insert tooth circle saw, 30 foot  Issue 364 403

Lumbermens™  since 1986

❘

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

PleAse PrINt

Pulleys on Bearing . Parts Book and

belted rollcase to clear slabs and

12846. Sam x702

short pop-up transfer to edger,

where to order included. Item ID

cuts from sawline, log stop and

Zip

❑ Please Remove

loader to drop logs onto carriage,

Precision 58 Chip Pac - Single chute

stop and loader to deal with big

Sam x702

loading system,. Item ID 12764.

heavy duty log turner under log

EST

Trelan Chipper - This is a remote

logs onto carriage and track and

State

www.starwebhosting.net/woodsmen/ frame. Significant new spare parts

chipper that has been totally rebuilt with about 840 hours except for the

to be negotiated separately. Item ID

BANDMILLS & HEADSAWS DealS Month SOUTHWEST FOREST PRODUCTS EXPO Danckaert Band Resaw - Roughly Fri, 25 August Sat, 26 August From ApriL TA B L E O F C O N T E N T S

Email

of the

V-12 Caterpillar power unit. New

13198. Sam x702

clutches, disc, bearing, liners and

Manual Four Head Block - Manual

custom chute. 23” in opening and

Four Head Block Mounted on

The Tree that Started it All!

all steel carriage. Husk. Manual Hot Springs, Arkansas www.arkloggers.com

'12 WoodmIzer LT 40

City

❑ Please Change

FOR CLASSIFIEDS Call 888.401.MENS TM CHIPPERS See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at L I S T New S York ELL EXCHANGE BUY SAVE 1986 Boonville, www.LumberMB\ISmagazine.com blades and 1 spare 36" blade),

DEPARTMENTS

V-12 Cat with 750-800 hp rating.

10 hours on this machine since it

has been rebuilt, it has a 24foot in

EquipmEnt REpREsEntativEs EST 1986

deck 20 foot out feed deck cAll uS todAy All youR uSed 72ND ANNUAL GREAT LAKES foR feed equiPMent with needS! 44 inch wheels, and all the Since 1986, Lumbermens has LOGGING & HEAVY EQUIPMENT EXPO Free Equipment published a monthly circular Listings ........................ 6 Thurs, 7 Sept - Sat, 9 Sept bells and whistles, its a production fREE EquipmEnt listings!

Call –

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan(888)

Company Name*

❑ Please add

Safety Alert .......................................22-23 LIST

SELL

SELL

Morris Woods

*Company name and address required to process your change.

Deals of theext.Month ................................ 30 (888) 401-6367 704 morris@lumbermens.co

Ad Directory .......................................... 46 MARKETING DIRECTOR Reduced PRice item id:14021 contact: Sam x702

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Lumbermens Magazine

expo.com/

FAbTeK 344b

P.O. Box 1916 Columbia, TN 38402

Donna Heninger

is an extremely accurate machine

morris@lumbermensco.com

chris@lumbermensco.com

in ve1y good condition, Cuts 130

Morris Woods, Ad Sales Phone: (888) 401-6367 ext. 704 morris@lumbermens.co

feet a minute also has CLT presses.

ext. 700 chris@lumbermens.co

Lexington, Kentucky http://www.kfia.org/ Sam Wall KentuckyWoodExpo.aspx (888) 401-6367

Item ID 13876. Austin x703

S & W 125Woods Band Mill with Austin

Caterpillar generator - Low hours (888) 401-6367

on the mill, electronic computer Set

Ext. 703

works,1 1/2" or 2" band, 22ft. track

sam@lumbermensco.com

EQUIPMENT REPS

item id: 14061 contact: J Williams x701

✁

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

MAILING ADDRESS

is supported on both sides. This

Ext. 700

THE PAUL BUNYAN SHOW Ext. 702 Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co Issue 364 lumbermenS

(888) 401-6367

Ext. 704

KENTUCKY WOOD EXPO chris Woods Fri, 15 Sept - (888) Sat, 16401-6367 Sept Phone:

For classifieds Call toDay (888) 401-6367 ❘

austin@lumbermensco.com

Cambridge, Ohio www.ohioforest.org

CJ

(888) 401-6367

 liSt  Sell  exchange  buY  Save

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Austin Woods Phone: (888) 401-6367 ext. 703 austin@lumbermens.co

** INFO LINK**

 Since 1986

SAVE

pressure guides. Top Casting wheel

2012 JoHn deere Selma, North Carolina (888) 401-6367 548G3 www.midatlantic-logging-biomass­ LOGGING & BIOMASS EXPO

BUY

it includes two sets of Mcdonough Chris Woods

AD Sales

Calendar of Events ................................

29 MID-ATLANTIC ADVERTISING SALES

EXCHANGE

that go up and down, with airbags,

EXCHANGE

item id: 14061 contact: Austin x703

Phone

Address

Individual Name

Woods Publishing

If you need to Change your Address or Add Your Name to our mailing list, then please complete this form and mail to:

LIST

MID-ATLANTIC & BIOMASS B U Y LOGGING SAVE Morris Woods Fri, 15 Sept Sat, 16 Sept News .................................24,E S26-29 T 1986

In thePUBLISHER



machine, with air strain conveyers 401-6367

❘

Ext. 701

Sam x702

Sam Wall Phone: (888) 401-6367 ext. 702 sam@lumbermens.co

CARRIAGES & Joe Ferrazzano

DRIVES

2010 Cardinal HD Carriage (888) 401-6367

Carriages (Sawmill) - Cardinal

 lumbermenSmagazine.com

Ext. 709

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28 cj@lumbermensco.com

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) ........ 36 Send address changes to: SUBSCRIPTION: Lumbermens™, a trade newspaper for the logging, Lumberman's Exchange Mfgwood .............................. sawmilling, manufacturing, andCorley secondary manufacturing32 P.O.pallet Box 1916 industry, is freeTN within the United States to qualifying manufacturers Columbia, 38402 CRD Metalworks ....................

25 and industry suppliers. Please limit your subscription to one free copy per company orExchange mill locatiison.

The Lumberman's CW Mill-ArmorHog .............. 17

Morbark ..................................... 9

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

published monthly

by Woods Send address changes to Lumbermens™ CHANGE OF ADDRESS: CW Mill-Hogzilla ................... 15 Publishing, Box 1916, Magazine,P.O. 1116 W. 7th St., Ste. 297, Columbia, TN 38401. When Columbia, TN 38402. All rights possible, please include an old addressDyna label. Products ........................ 35 reserved. All editorial/ advertorial REPRODUCTION AND Adverti sers are................... responsible 8 submissions are used at the RESPONSIBILITY: Empire Hydraulics discretion of the publisher and may for the contents and claims of their advertising. Lumbermens™ accepts beno edited for purposes of their clarityclaims. No Great Lakes Mfg. .................... responsibility for part of this publicati on may be34 and space. Although all efforts reproduced or transmitt edhave in any form or by any means, electronic Hahn Machinery ...................... been to ensure accuracy photocopying, of or made mechanical, including recording or any information 3 content submitted by advertisers storage retrieval system, without Hurst permission of Lumbermens™.14 Boiler ............................. and writers, the Lumberman's Negatives, artwork, and other items submitted for publication in Exchange, its principles and IronserQs. Bull ...................................

Lumbermens™ are the property of adverti Lumbermens ™ owns21 associates, are not held liable for material typeset and/or designed by Lumbermens ™ and reserves the errors or omissions. Reproduction, Kilgore Saw ............................. 22 use outside ofwith­ Lumbermens™. Lumbermens™ will exercise in right wholeto orits part, is prohibited precauti on in writing, designing,Lignomat and printi................................. ng material contained 24 outevery written consent. within. We shallWoods not bePublishing liable for omissions or typographical errors. ©2017

- USED FORESTRY EQUIPMENT FOR SALE

❘

joe@lumbermensco.com

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

The TreeSTACKING that Started RAC it All!

Multitek ................................... 12

Piper's Saw Shop.................... 13

Rotochopper............................ 40

Row Electric ............................ 20

Sawmill Exchange .................. 11 Since 1986, Lumbermens™ has pub lished a month ly circular Select Sawmill ......................... 19 reaching sawmills, loggers, pallet makers, recyclers and industrial woodSawmill working........................... plants worldwide.

Smith 4 PUBLISHER The Paul Bunyan Show ......... 39

AD SUBMISSIONS May be sent to— morris@lumbermensco.com

Woods Publishing

Thomas Industrial Controls..... 10 DESIGN DIRECTOR

Union Grove Saw & Knife.. 2, 37 Ted Monnin Universal Refiner ................... 23

MAILING ADDRESS 1116 W. 7th St., Ste. 297 • Columbia, TN 38401 WoodMizer ................................ l (888) 401-6367

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

POSTMASTER Send address changes to: Lumbermens™ Magazine 1116 www.BakerProducts.net W. 7th St., Ste. 297 • Columbia, TN 38401

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 5

Phone 315.284.4126 Fax Phone 315.849.2045 315.284.4126 Website Fax www.empirehyd.com 315.849.2045 Email Website “Precision Under Pressure” info@empirehyd.com www.empirehyd.com Email “Precision Under Pressure” info@empirehyd.com

TM

‘93 Barko 180B

FREE EQUIPMENT

‘16 Halverson H140 ID: 14077 ‘93Item Barko 180B Contact: Austin Skidsteer (DEMO) ‘16 Halverson H140 Item ID: 14077 Ph: (888) 401-6367 x703 Item CALL ID: JW-909632 LISTINGS, (888) 401-MENS Contact: Austin Skidsteer (DEMO) Contact: J Williams

under log Cuts stop130 and loader to condition, feet a minute deal with big logs onto carriage also has CLT presses.

DANCKAERT BAND DANCKAERT BANDRESAW RESAW andItem track frame.

IDand 13876.

Austin x703 Roughly Roughly 1010 hours hours onon this this CARRIAGES & Sam DRIVES Item ID 13198. x702 machine machine since since it it has has been been 2010CHIPPERS CARDINAL HD rebuilt,it it hasa a2424foot footininfeed feed rebuilt, has CARRIAGE58 CARRIAGES PRECISION CHIP PAC deck20 20 foot out deck with deck outfeed feed deck Cardinal Carriage linesystem. it includes chute loading 44 inch wheels, and all and the bells with 44 inch wheels, all Single carriage with onboard Item ID 12764.

Sam x702log and whistles, its a production the bells and whistles, its a turners, carriage drive, hyd COMPLETE SAWMILLS machine, air strainwith conveyers producti onwith machine, air for carriage, sawyers cab, that conveyers go up and with pac strain thatdown, go up and 2006 WOODMIZER LT300 computer controls, cabinet with airbags, it includes two sets of down, with airbags, it includes This mill is currently running, electronic drives for carriage Mcdonough guides. Top and two sets pressure of Mcdonough includes the sawmill, and knees, husk including 48” Casting wheel is supported on pressure guides. Top Casting cab. An incline conveyers, a bottom saw and 36” top saw, both sides.

This is anon extremely wheel is supported both transfer table and two sets of accurate machine in very good short pop-up transfer to edger, sides.

ThisVictory is an extremely roller tables. This mill saws a 13428 Ln. // PO Box 124 accurate machine inLn. very good million board feet or more of Adams Center, NY 13428 Victory //13606 PO Box 124 condition, Adams Cuts Center, 130 NY feet13606 a walnut every year. Max log minute also has CLT presses. diameter 36in, Max Width Item ID 13876. Austin x703 of cut 25in, The width of the CARRIAGES & DRIVES band is 1 1/2 Inches. Video of it operating is available, and 2010 CARDINAL HD can be sent upon request.

CARRIAGE CARRIAGES Item ID 13892. Austin x703 Cardinal Carriage line it includes DRY KILNS carriage with onboard log turners, carriage drive, hyd ‘05 Gehl MECCTL 12 X 70 38 ‘05 ID: Gehl CTL 70DRYER pac for carriage, sawyers cab, Item TRIPLE PASS DRUM JW-986495 computer controls, cabinet with Comes Item ID: with trunnions, drum Contact: JJW-986495 Williams electronic drives for carriage drive, Contact: J Williams fan and cyclone.

Ph: (888) 401-6367 x701 ‘83 John Ph: (888) 401-6367 x701 knees, huskDeere including 48” Item ID 13925.

Austi n x703 ‘83 John Deere bott om saw and 36” top saw, 4850 short pop-up transfer to edger, chain conveyer, 4850 MEC 812 X 42 way splitter, on Item ID: 14073 chain conveyer, 8DRUM way splitter, on belted rollcase to clear slabs 20,000lb TRIPLE PASS DRYER Item ID: 14073 goose neck trailer.

Item ID Contact: Austin 20,000lb trailer.

ID andContact: cuts fromAustin sawline, log stop 12 x 42 goose Mec neck triple passItem Drum 13916. Austin x703 Ph: (888) 401-6367 x703 andPh: loader drop logs onto Dryer, comesx703 with trunnions.

13916. Austin (888)to401-6367 x703 Value Log Splitter carriage, heavy duty log turner Best Item ID Portable 13924. n x703 Best Value PortableAusti Log Splitter BANDMILLS && HEADSAWS BANDMILLS HEADSAWS

Item ID: JW-909632 belted rollcase to clear slabs Ph: (888) 401-6367 x701 DYNAMIC CHIPPERS Contact: J Williams and cuts from sawline, log stop 2004 JCB 441 WHEEL LOADER Ph: (888) 401-6367 x701 and loader to drop logs onto 3,509 hours on this machine, carriage, heavy dutyaslog turner everything works it should. under log stop and loader to I have many videos available deal with big logs onto carriage of it running, and can be sent and track and frame. upon request.

Item ID 13198. Sam x702 Item ID 13888.

Austin x703 CHIPPERS

PRECISION 58 585 CHIP PAC 2008 DYNAMIC CHIPPER Single chute loading system.

This is a 2008 dynamic cone ItemKMC ID 12764.

Sam x702 ‘13 2500 head chipper withTrack 1700 COMPLETE SAWMILLS ‘13 KMC 2500 Track hours, in very good condition.

Skidder 2006 produces WOODMIZER Easily highLT300 quality Skidder Item ID:is14078 This mill currently running, chips with patented ‘Cone’ Contact: Austin Item ID: 14078 drum design.

Can easily load Ph: (888)Austin 401-6367 x703 Contact: 42’ vans and produce 6 - 8 Ph: (888) 401-6367 x703 loads per day.

1994 BarkoBARKO 160B - Electric BANDIT Item ID 13882. Austin x703 1994 BarkoMEC X 42 160B12 - Electric off onto a conveyor. This is a very knuckleboom, 30' boom, 75hp FIREWOOD PROCESSORS 2004 BANDIT BEAST MODEL TRIPLE PASS DRUM DRYER 30' boom, 75hp off onto a conveyor.

This is aID very well built processor.

Item 13820. knuckleboom, motor, Rotobec continuous 4680 12 x 42 Mec triple pass Drum 2010 SHOP BUILT Rotobec continuous well processor. Item ID 13820. motor, Sambuilt x702 grapple, 5,000 original hours.

3412 Caterpillar Diesel engine Dryer, comes with trunnions.

WOOD PROCESSOR grapple, 5,000 original hours.

Sam x702 Firewood Processor - This is 40 Item (excellent condition.).

Item ID in with 850 HP. 5300 Mill ID 13924.

Austinhrs. x703 It has a 353 Detroit diesel, condition.).

Item Firewood Processor -16 This is good condition.

JustIDfinished DYNAMIC CHIPPERS inch insert tooth circle saw, (excellent a Chomper Model PDA 13238.

Chris x700 10 Acre clearing job, ready Chris x700 a30 Chomper Model 16 PDA foot chain conveyer, 8 way 13238.

2004 JCB 441 WHEEL LOADER automatice firewood processor 1995 Barko 775 B Feller Buncher to Barko work!

Remote control.

Big splitt er, on 20,000lb goose neck 3,509 hours on this machine, 1995 775 B Feller Buncher automatice firewood processor with John Deere power unit with - Pumps recently redone. 400 hrs production capacity! everything works as it should.

I have trailer.

- Pumps recently redone. 400 hrs with John Deere power unit with low hours. Control panel includes onItem injection pump. always started IDavailable 13421. x702 many videos ofSam it running, Item IDControl 13916.panel Austiincludes n x703 on injection pump. always started low hours. tach, oil pressure, water temp and andgood. good working order. 22in BARKO can beinsent upon request. good. in good working order. 22in tach, oil pressure, water temp and Item ID 13888.

Austin x703 amp gauges. CutsPROCESSOR logs up to 16”. kohing head.BARKO head works great.

FIREWOOD 1994 160B kohing head. head works great. amp gauges.

Cuts logs up to 16”.

This is a homemade processor Electric 30’ boom, One owner and comes with all Item ID knuckleboom, 13185. Sam x702 ID 13185. x702 continuous One owner and log comesdeck. with allHas a Item with a and 10’ 75hp motor,Sam Rotobec manuals receipts.

Purchased 1999 Barko 160D - new engine with Barko 160D engine with(exmanuals and grapple, receipts. Purchased hydraulic chain and 1999 grapple, 5,000- new original hours. new for $32,500. Item ID 13865. approximately 1500 hours. Hour kicker that all runs off of a approximately cellent condition).

1500 hours. Hour new for $32,500.

Item ID 13865. x702 meter dont13238. work. The lastx700 2 owners 4Samcylinder Mercedes power meter Item Chris dont ID work. The last 2 owners Sam x702

If you recognize this…

with 1700 hours, in very good with 1700 hours, in very good condition. Easily produces high condition. Easily produces high quality chips with patented ‘Cone’ quality chips with patented ‘Cone’ drum design. Can easily load 42’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703 day. Item ID 13882. Austin x703

- Small manufacturer in PA has - Small manufacturer in PA has made the best valued log splitter. made the best valued log splitter.

Handles logs up to 32”. Uses Handles logs up to 32”. Uses 13HP Honda motor. Manual start 13HP Honda motor. Manual start but electronic option is available. but electronic option is available.

Has Log Lift. Uses 4-way wedge Has Log Lift. Uses 4-way wedge adjustable Great adjustabletotosingle singletwo two way. way. Great

you need one of these.

Brewco Saws - Two Brewco Saws Brewco Saws - Two Brewco Saws in excellent condition.

Runs great. in excellent condition. Runs great.

Value! x702 Value!PA. PA.Item ItemID ID12062.

12062. Sam Sam x702 Firewood Processor This is a Firewood Processor - This is a

LOGGING EQUIPMENT LOGGING EQUIPMENT BANDIT BANDIT

1999 Bandit 1900 Tracked Disc 1999 Bandit 1900 Tracked Disc 1500 ModelCarriage at Chipper - Cat Under Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner.

Diesel. 7500 Hours. One owner.

Wellmaintained. maintained.

Item 13294.

Well Item IDID 13294.

Don’t just fix it again, get the permanent solution!

EDGERS & GANGS EDGERS & GANGS

ItemItem ID 13644.

Sam x702 ID 13644.

Sam x702

FIREWOOD PROCESSORS FIREWOOD PROCESSORS

20102010 Shop Built Wood Processor Shop Built Wood Processor - It has a 353 Detroit diesel, 40 40 - It has a 353 Detroit diesel,

homemade 10’ homemadeprocessor processor with with aa 10’ log logdeck. deck.Has Hasaahydraulic hydraulic grapple, grapple, chain off chainand andkicker kickerthat that all all runs runs off ofofa a4 4cylinder Mercedes power cylinder Mercedes power

www.prolenc.com

Call 877.563.8899 250.563.8899 inchinch insert tooth circle saw, 30 30 foot unit.

Has kicks unit.

Hasaa4’4’chain chainsaw saw that that kicks insert tooth circle saw, foot or  Issue 364 ™ ™ since 403364  Issue Lumbermens since1986 1986 384Lumbermens

❘❘

Ph: (888) 401-6367 x703 unit.

Has athe 4’ chain saw that and includes sawmill, and kicks onto aconveyers, conveyor. This cab.

Anoff incline a is a verytable well and built two processor. transfer sets of roller This Sam mill x702 saws Itemtables.

ID 13820. a million board feet or more of walnut every year.

Max log FIREWOOD PROCESSOR diameter Max Model Width 16 This is a36in, Chomper ofPDA cut 25in, The width the automati ce of firewood ‘95 John Deere C6 band is 1 1/2 with Inches.John VideoDeere of processor John Deere C6 it‘95 operating is available, and Treeunit Farmer power with low hours. can be sent upon request.

Control panel includes tach, Item ID: 13920 Tree Farmer Item ID 13892.

Austin x703 and oil pressure, water Contact: Austin temp Item ID:DRY 13920 KILNS amp gauges.

Cuts logs up to Ph: (888) 401-6367 x703 Contact: Austin MEC 12 X 38 16”.

One owner and comes Ph: (888) 401-6367 x703 TRIPLE DRUM DRYER with allPASS manuals and receipts.

Comes with new trunnions, drum Purchased for $32,500. capacity!. Item ID 13421. Sam x702 drive,Item fan and cyclone.Sam x702 ID 13865. capacity!.

ID BARKO 13421.

Sam x702 ItemLOGGING IDItem 13925.

Austin x703 EQUIPMENT

Samx702 x702 Sam 2004 BanditBeast Beast Model 4680 2004 Bandit Model 4680 - 3412Caterpillar CaterpillarDiesel Diesel engine 3412 engine with850 850HP. HP.5300 5300 hrs.

Mill with hrs.

Mill in in

goodcondition. condition.Just Just finished good finished 10 10 Acre clearing job, ready to work!

Acre clearing job, ready to work!

Remotecontrol. control.Big Big production Remote production

 seLL   exchange exchangebuy buy  save  List List  seLL save

have only used it to load trucks or have only used it to load trucks or as a backup as needed. Has a CTR as a backup as needed. Has a CTR delimber, grapple has been rebuilt. delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702 Item ID 13694. Sam x702 94 Barko 275 - Excellent value 94 Barko 275 - Excellent value with at hours at 3,500. with lowlow at hours at 3,500.

5.9 5.9 CUMMINS continuous grapple.

CUMMINS continuous grapple.

Runs Great!.

Item ID 13740.

Runs Great!. Item ID 13740. Sam Sam x702 x702

BELLBELL

1990 Super T - This Bell has 1990 BellBell Super T - This Bell has a brand new Duetz engine. a brand new Duetz engine. LeverLever

control, pump and tranny control, 33” 33” bar, bar, pump and tranny ❘

❘  LumbermensCO.com  LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

**

CARRIAGES & DRIVES

LINK** Carriages (Sawmill) - Cardinal Field Proven Design forINFO the Independent Hardwood Sawmill MAILING ADDRESS

2010 Cardinal HD Carriage

Carriage line it includes carriage

B & B Mfg . ...............................

18 M&F Gauge ............................. 28- Two proven P.O. Box 1916 • Corley lnfeed and Edger with Lewis Optimization with onboard log turners, carriage Columbia, TN 38402-1916 B. H. Payne .............................. 16 Meadows Mill, Inc. ................ 33 drive, hyd pac for carriage, (888) 401-6367 names with proven results Menominee Saw .....................

29 Baker ......................................

5, 7 sawyers cab, computer controls, AD SUBMISSIONS May be sent to­ cabinet with electronic drives for • True HardwoodBell's Optimization Machining ..................... 27 Metal Detector's Inc. .............. 30 morris@lumbermens.co carriage knees, husk including Brute Force Mfg. ..................... 31 Midwest Sharpening.............. 26 • Small footprint that fits inside most existing mills POSTMASTER 48" bottom saw and 36" top saw Buck Equipment (AIM) ........ 36 Morbark ..................................... 9 Send address changes to: Exchange •Lumberman's Value priced with allMfgof.............................. the optimization capability12 of more Corley 32 Multitek ...................................

P.O. Box 1916 Columbia, TN 38402 CRD Metalworks ....................

25 Piper's Saw Shop.................... 13 elaborate high speed Edger Optimizers

STACKING For more information on our new "M" Series Edger RAC and

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

other Corley and Lewis products, give us a call.

LEWIS CONTROLS CORLEY SAWMILL OPTIMIZATION MACHINERY Chattanooga, Tennessee Iron Bull ................................... 21

Kilgore Saw ............................. 22 Phone 423-698-0284 Lignomat ................................. 24

www.corleymfg.com

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Cornelius, Oregon

Union Grove Saw & Knife.. 2, 37

Phone 503-648-9119

Universal Refiner ................... 23 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY TODAY l§

www.BakerProducts.net

www.lewiscontrols.com 800.S48.6914 I S73.663.7711 ❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 7

140

Phone 315.284.4126 Fax BELL TREE CUTTER BELL 315.849.2045 Around 1000 hours on the Website 1990 BELL SUPER T machine.

New air cooled motor www.empirehyd.com This Bell has a brand new DuetzEmail “Precision Under Pressure” engine.

Lever control, 33” bar,info@empirehyd.com pump only about 300 hours. Rebuilt

and tranny has been rebuilt not long ago. Hour meter is inop. New paint.

Runs perfect. Has heat and air, it just needs to be fixed.

Item ID 13896. Sam x702

1993 BELL SUPER T Good running condition. 33” Bar Saw. Tires at 50%. Deutz engine. Hour meter broken.

Item ID 13543. Sam x702

000

It

702

er

CASE

2006 CASE 440 SKID LOADER With only 871 hours, this machine starts, runs, and operates like new. I have many videos available and can be sent upon request.

Item ID 13886. Austin x703

PIPER’S Saw Shop

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

5 7 0 6 • 5 4 8 • 800

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Promotional Pricing Offer

Simonds Red Streak Hard Back ‘057/8” Gehl CTL 70 1-1/4” x .042 x 3/4” or L im it e d Length 13’2”Item ID: JW-986495 Contact: J Williams T im e Ph: (888) 401-6367 x701

$14.71 $14.27 each

‘83 John Deere 4850 Tell us you saw it here!

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

O n ly

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

this skidder at only 3700. These

Firewood Processor - This is a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off

ly - It has a 353 Detroit diesel, 40 of a 4 cylinder Mercedes power ower inch insert tooth circle saw, 30 foot unit. Has a 4’ chain saw that kicks ew  Issue 1986 403 arch with364 winch.Lumbermens Low hours on™  since Cat D5B Dozer❘ - Cat  D5BList s/n  seLL

still

stick and bucket cylinder have been repacked. It has a thumb and bucket on it, also has a 230 Waratah processing head that can be sold with it. Hours are around 19k, motor has been ‘93 Barko replaced a couple180B years back.

Item ID: 14077 daily.

Machine is working Contact: Austin Item ID 13936.

Austin x703 Ph: (888) 401-6367 x703 1994 CATERPILLAR D4 HI TRACK WITH GRAPPLE This is an extremely low hour dozer/skidder with only 2800 actual hours. Comes with new 30” pads and chain. Undercarriage is still in excellent shape. Fixed grapple and no winch.

‘95 John Deere C6 Item ID 13932. Sam x702

Tree Farmer

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

used vans and produce 6 - 8 loads per or a day. Item ID 13882. Austin x703

702

dangling head. Several bars and chains. Machine came off the job in February and is field ready.

Item ID 13943. Austin x703

99’ CASE 850G LONG TRACK DOZER One owner machine, only 3300 original hours, has never been used in the woods, it has a ripper on the back, original pads, and ‘16 Halverson H140 chains, Under carriage is new along with new(DEMO) rollers on the Skidsteer bottom, new sprockets.

Item ID:and JW-909632 Item ID 13909.

Austin x703 Contact: J Williams CATERPILLAR Ph: (888) 401-6367 x701 1994 CATERPILLAR 320 Dry machine that is in good condition for the year. The

22X380, direct drive, EROPS,

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

1996ID: CAT 214 MOBILE Item 13920 EXCAVATOR Contact: Austin with magnet 3 tons steel Ph:36’ (888) 401-6367 x703 shear. low hrs! All hard tires, 4 outriggers ideal for scrap business. It also has 48’ swavel capacity!. Item ID 13421. Sam x702 bucket for street ditch clean up.

BARKO Item ID 13441.

Sam x702 1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 exchange buy save come hook up to  it and go  to your

job site and put it to work to up

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 9

Phone 315.284.4126 1998 CATERPILLAR 515 Fax30.5’s @ 70%. This is a really 315.849.2045 Grapple with winch, no heat nice skidder for the price.

Website Item ID 13816. Sam x702 or air. Open cab skidder www.empirehyd.com with 9800 hours.

Tires areEmail “Precision Under Pressure” info@empirehyd.com

28L’s, rear 90% and fronts are 30% with new bear paws chains.

Item ID 13801. Sam x702 2005 CATERPILLAR 525B This is a dual arch skidder with winch. Very low hour skidder with 7900 frame hours and only 63 hours on a new engine.

Continuous grapple, tires are

2007 CATERPILLAR D6N LGP DOZER ENCLOSED CAB Overall: Cab Heat & AC, 150HP Cat C6.6L, 90% Undercarriage, GPS Ready, Sweeps & Rear Screen, 13’6” PAT Blade, 39,500 LBS, Hours: 7,867 Horsepower: 150 S/N: ALY03028.

Item ID 13567. Chris x700

2000 CAT 515 GRAPPLE SKIDDER One Owner Runs great! Is it an excellent condition.

Rubber is around 75% Has new Hydraulic pump and Charge pump.

‘16 Halverson Item ID 13616. SamH140 x702

fires right up, and runs with no issues.

Item ID 13748. Austin x703 EARLY 70’S CLARK 664 CABLE SKIDDER ‘93center Barko some slack,180B needs front Itemcomes ID: 14077 tires, with a spare tire.

Contact: Gearmati c Austin 19 winch doesn’t Ph: (888) 401-6367 x703 hold good. 453 Detroit power unit.

Item ID 13629. Sam x702

CLARK Skidsteer (DEMO)

CLARK RANGER 665D Item ID: JW-909632 Tight and dry machine, rebuilt Contact: J Williams Ph: (888) 401-6367 motor. hour meterx701 broken, It has a 353 Detroit, with grapple, and winch, always

JEM

EXPORT LOG DEBARKING LINE Reconditioned 35 Nicholson A-5 debarker, cab, infeed hour glass rolls, log dischage belt with side log kickers.C6 Call ‘95 John Deere 208-451-0365 for details.

Tree Farmer $279,000 Item ID: 13920 JOHN DEERE Contact: Austin ‘92 JOHN DEERE 590 D Ph: (888)CUTTER 401-6367 x703 Will need pads in the future, sprockets and rails are about capacity!.

Item ID 13421.

Sam x702 85%, it has a 4cyl JD motor.

It has a RotneeBARKO dangle hd. w/ a bar saw and160B a spare idler.

1994 Barko - Electric Item ID 13612.

Chris x700 knuckleboom, 30' boom, 75hp

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

motor, Rotobec continuous

grapple, 5,000 originalShours.

ALES A R TIDS (excellent condition.). PItem S E RV I C E 13238. Chris x700

RAWLINGS WOOD HOGS RAWLINGS HOGS Custom Wood GrindingWOOD Systems Custom Wood The original rotary hog was invented and Grinding developed by Systems

Firewood Processor - This is

Rawlings Manufacturing Inc. in 1977. Since then our family The original rotary hog was invented and developed by owned and operated company has designed, manufactured Rawlings Manufacturing Inc. in 1977. Since then our family and marketed several product lines. owned and operated company has designed, manufactured Rawlings Wood Hogs are available in stationary, and marketed several product portable lines.

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 403

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

a Chomper Model 16 PDA

R

Rawlings Wood Hogs areand available in stationary, portable delivery from simple stand-alone vertical horizontal hogs to custom wood waste recovery systems. delivery from simple stand-alone vertical and horizontal hogs As a proven leader in size reduction equipment we’re to custom wood waste recovery systems. assisting our customers in utilizing renewable resources while reducing and recycling a wideleader varietyinofsize wood waste into As a proven reduction equipment we’re marketable products. assisting our customers in utilizing renewable resources while reducing and recycling a wide variety of wood waste into marketable products.

R

COMPLETE 1995 BarkoLINE-UP 775 B Feller Buncher OF THE MOST PRODUCTIVE - Pumps redone. 400 hrs AND COSTrecently EFFICIENT WOOD GRINDERS

automatice firewood processor

with John DeereCustomer power unit with Testimonials Customer Testimonials

When the decision was made to upgrade our hog, we considered several options but had heard the decision was made to that the RawlingsWhen hog had upgrade our hog, we considered superior result when compared several options but had heard to other hogs once considered.

Rawlings The decision wasthat easythe as soon as hog had we evaluated oursuperior options. result Since when compared to other hogs once considered. the upgrade, we have realized The was easy as soon as many returns that wedecision had hoped “Compare we evaluated our options.

Since this to other hogs we have had were maintained the upgrade, running a full shift without a we have realized at least weekly and you will see problematic shutmany down.returns That that we had hoped there is no comparison at all. this to other hogs “Compare factor alone has increased our Rawlings PXZ Vertical & HZX This Rawlings machine is easier we have had were maintained uptime. Prior to running the upgrade, a fullthe shift without a Horizontal Super Hi-InertiaPXZ Hogs to work on, get into, Rawlings Vertical & HZX at and leastinspect weekly and you will see barker needed to run on lower problematic shut down.

That are the most productive and than any other hogthere we have Horizontal Super Hi-Inertia pressures Hogs nohad. comparison at all. to reduce factor aloneof has increased our invented and is Thechances original rotary hog was developed by I would have to sayThis thatRawlings overall, are the most productive and machine is easier plugging the hog.uptime.

To summarize, proven track records in some of the Prior to the upgrade, Rawlings Manufacturing Inc.the in 1977.toSince then our family work on, get into, and inspect toughest applications that exist. the return on investment that to run on lower barker needed owned and operated company has designed, manufactured only found one drawback with proven track records in some the than any other hog we have had. we of expected has pressures been greatly to reduce chances of lines. thisproduct machine.

You sometimes toughest applications that exist. and marketed several • Biomass Recovery I would have to say that overall, increased and I would not hesitate plugging the hog. To summarize, • Alternative Fuels forget to check it out regularly to recommend tothe anyone toon invest return investment that • Biomass and Co-Generation Rawlings Wood Hogs are available in have stationary, portable • Biomass Recovery because you never any The original rotary hog was invented and developed by in a Rawlings Hogwe system.

• Sawmill expected has beenproblems greatly with it.” only found one drawback with • Alternative Fuels Rawlings Manufacturing Inc. in 1977.

Since then family this machine.

Youour sometimes • Pulp ,Paper, and Pellet Plants increased and I simple would not hesitate vertical • Biomass and Co-Generation delivery from stand-alone and horizontal hogs owned and operated company has designed, manufactured Western Forest Products, forget to check it out regularly • Compost and Mulch Operations to recommend to anyone toFraser, invest Huttig, • Sawmill West Arkansas wood waste recovery systems.

• Recycling Facilities British Columbia to custom and marketed several product lines. because you never have any in a Rawlings Hog system.

• Pulp ,Paper, and Pellet Plants • Waste To Energy Plants problems with it.”

• Compost and Mulch Operations As a proven leader size are reduction equipment we’re Rawlings WoodinHogs available in stationary, portable • Recycling Facilities Western Products, in utilizing renewable resources while assistingForest our customers Rawlings Manufacturing, Inc. West Fraser, Huttig, Arkansas • Waste To Energy Plants British Columbia

low hours. Control panel includes

on injection pump. always started

tach, oil pressure, water temp and RAWLINGS WOOD HOGS

good. in good working order. 22in

amp gauges. CutsRAWLINGS logs WOOD up to 16”.

HOGS

kohing head. head works great.

Custom Wood Grinding Systems

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

One owner and comes with all

1999 Barko 160D - new engine with R

delivery from simple stand-alone horizontal reducing and recycling a wide variety vertical of woodand waste into hogs 1780 Idaho St. Missoula, Montana 59801

new for $32,500.Customer ItemTestimonials ID 13865. to custom wood waste recovery systems. marketable products.

a proven leader in size reduction equipment we’re Rawlings As Manufacturing, Inc.

Montana 59801 R A W L I N G S W O O D H O G S - 1780 W WIdaho W . WSt. Aassisting SMissoula, T E Wour O Ocustomers D H O G in S .utilizing C O M renewable resources while

- Small manufacturer in PA has

made the best valued log splitter.

reducing and recycling a wide variety of wood waste into

A Proven Leader in Wood Reduction Equipment and Technology marketable products.

Genuine Rawlings Wood Hogs

Sam x702

parts available at Rocwear Solutions, Inc.to When the decision was made

Customer Testimonials

R

several options but had heard that the Rawlings hog had Genuine Rawlings Wood Hogs superior result when compared When the decision at was made to Solutions, Inc. parts Rocwear to other hogsavailable once considered. upgrade our hog, we considered The decision1-866-RocWear was easy as soon(866-762-9327) as several options but had heard we evaluated our options. that the Rawlings hog Since had the upgrade, have realized superiorwe result when compared manyto returns that we had hoped other hogs once considered.

“Compare this to other hogs The decision was easy as soon as we have had were maintained running full shift without a Since we aevaluated our options. at least weekly and you will see problematic shut down.

That the upgrade, we have realized factormany alonereturns has increased our hoped there is no comparison at all. that we had Rawlings PXZ Vertical & HZX This“Compare Rawlings machine is easier this to other hogs uptime. Prior to the upgrade, the Horizontal Super Hi-Inertia Hogs to work on, get inspect we have hadinto, wereand maintained barkerrunning neededa to onwithout lower a fullrun shift are the most productive and thanatany other hogand we you havewill had. least weekly see pressures to reduce chances of problematic shut down. That I would have tocomparison say that overall, there is no at all.

The original rotary hog was invented and developed by factor alone has increased our plugging the hog.

To summarize, proven track records in some of the Rawlings PXZ Vertical & HZX This Rawlings machine is easier uptime.

Prior to the upgrade, the toughest applications that exist. the return on investment that then our family Horizontal Super Hi-Inertia Hogs Rawlings Manufacturing Inc. in 1977. Since to work on, get into, and inspect only found one drawback with barker needed to run on lower we expected has been greatly owned and operated company has designed, manufactured are the most productive and any other hog we have had. this than machine.

You sometimes • Biomass Recovery pressures reduce of increased andseveral I to would notchances hesitate and marketed product lines.

I would haveitto say that overall, • Alternative forget to check out regularly plugging the hog. To summarize, provenFuels track records in some of the to recommend to anyone to invest • Biomass and Co-Generation because you never have any toughest applications that exist. Rawlings the return on investment that The original rotary hog was invented and developed by in a Rawlings system.

WoodHog Hogs are available in stationary, portable • Sawmill only found one drawback with problems withour it.” family we expected has been greatly Rawlings Manufacturing Inc. in 1977.

Since then • Pulp ,Paper, andRecovery Pellet Plants this machine.

You sometimes • Biomass increased and I would not hesitate Western Forest Products, owned and operated company has designed, manufactured • Compost and Mulch Operations delivery from simple stand-alone vertical and horizontal • Alternative Fuels to check out regularly Fraser, Huttig,ithogs Arkansas recommend to anyone to invest Westforget • Recycling Facilities Columbia andtomarketed several product lines.

• Biomass and Co-Generation to British custom waste in awood Rawlings Hog recovery system. systems. because you never have any • Waste• To Energy Plants Sawmill problems with it.”

Woodin Hogs available in stationary, portable • Pulp ,Paper, and Pellet Plants As a Rawlings proven leader sizeare reduction equipment we’re Western Forest Products, • Compost and Mulch Operations Rawlings Manufacturing, Inc. renewable West Fraser, Huttig, Arkansas assisting our customers in utilizing resources while • Recycling Facilities Britishfrom Columbia simple stand-alone and horizontal reducing and recycling a wide varietyvertical of wood waste into hogs 1780 Idaho St.delivery Missoula, Montana 59801 • Waste To Energy Plants

LOGGING EQUIPMENT BANDIT R

RAWLINGS WOOD HOGS Custom Wood Grinding Systems

1999 Bandit 1900RAWLINGS Tracked WOOD Disc HOGS

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Custom Wood Grinding Systems

Chipper - Cat Under Carriage at to custom wood waste recovery systems. marketable products.

As a proven leader in size reduction equipment we’re

Diesel. 7500 Hours.

One owner.

Customer Testimonials A Proven Leader inRawlings Wood Reduction Equipment and Manufacturing, Inc.Technology

assisting our customers in utilizing 1780 Idaho St. Missoula, Montana 59801renewable resources while R A W L I N G S W O O D H O G Sreducing - WW W recycling . W A S Ta E WO ODH G Swaste . C O into M and wide variety of O wood A Proven Leader in Wood Reduction Equipment and Technology marketable products.

Genuine Rawlings Wood Hogs Rocwear the made R A W L I N G S W O O D When H O parts G S decision -available W Wwas Wat .W Ato S T ESolutions, W O O D Inc. HOGS.COM 1-866-RocWear (866-762-9327) upgrade our hog, we considered

Well maintained.Customer ItemTestimonials ID 13294.

R

Sam x702

Genuine Rawlings Wood Hogs several options but had heard parts available that the Rawlings hog had at Rocwear Solutions, Inc. 1-866-RocWear superior result when compared When the decision was made (866-762-9327) to to other hogs our once considered. upgrade hog, we considered The decision was easy soon as several options butashad heard we evaluated our options.

Since that the Rawlings hog had superior we result when compared the upgrade, have realized other hogs considered. manytoreturns that once we had hoped The decision was easy as soon as “Compare this to other hogs we have had were maintained we evaluated options. running a full shiftour without a Since at least weekly and you will see the upgrade, we have realized problematic shut down.

That is no comparison at all. that we had factormany alonereturns has increased our hoped there to other hogs This“Compare Rawlings this machine is easier uptime. Prior to the upgrade, the we have hadinto, wereand maintained to work on, get inspect running a full shifton without barker needed to run lower a atany least weekly will see than other hogand weyou have had. problematic shutchances down. That pressures to reduce of therehave is notocomparison at all.

I would say that overall, factor alone increased our plugging the hog.has To summarize, This Rawlings machine is easier uptime.

Prior to the upgrade, the the return on investment that to work on, get into, and inspect barker needed to run on lower only found one drawback with we expected has been greatly than any other hog we have had. pressures to reduce chances of this machine. You sometimes increased and I would not hesitate I would have to say that overall, plugging the hog. To summarize, forget to check it out regularly to recommend to anyone to invest the return on investment that because you never have any in a Rawlings Hog system. only found one drawback with we expected has been greatly problems with it.”You sometimes this machine. increased and I would not hesitate forget to check it out regularly Western Forest Products, to recommend to anyone to invest West Fraser,you Huttig, Arkansas because never have any British in Columbia a Rawlings Hog system. problems with it.”

R

2004 Bandit Beast Model 4680 Rawlings PXZ Vertical & HZX Horizontal Super Hi-Inertia Hogs are the most productive and

3412 Caterpillar Diesel engine provenRawlings track records in some the PXZ Vertical & of HZX toughest applications exist. Hogs Horizontal Superthat Hi-Inertia are the most productive and • Biomass Recovery provenFuels track records in some of the • Alternative toughest applications that exist.

• Biomass and Co-Generation • Sawmill Biomass • Pulp •,Paper, andRecovery Pellet Plants • Alternative Fuels • Compost and Mulch Operations • Biomass and Co-Generation • Recycling Facilities • Sawmill • Waste To Energy Plants • Pulp ,Paper, and Pellet Plants Western Forest Products, • Compost and Mulch Operations Rawlings Manufacturing, Inc. • Recycling Facilities British Columbia • Waste To Energy Plants 1780 Idaho St. Missoula, Montana 59801

with 850 HP. 5300 hrs. Mill in

good condition. Just finished 10

West Fraser, Huttig, Arkansas

Acre clearing job, ready to work!

A Proven Leader inRawlings Wood Reduction Equipment and Manufacturing, Inc.Technology 1780 Idaho St. Missoula, Montana 59801 RAWLINGS WOOD HOGS - WWW.WASTEWOODHOGS.COM A Proven Leader in Wood Reduction Equipment and Technology

Genuine Rawlings Wood Hogs parts Rocwear Inc. RAWLINGS WOOD HOG S - available W W W at .W A S T E Solutions, WOODH OGS.COM 1-866-RocWear (866-762-9327)

Remote control. Big production R

R

Genuine Rawlings Wood Hogs parts available at Rocwear Solutions, Inc. 1-866-RocWear (866-762-9327)

 List  seLL  exchange  buy  save

approximately 1500 hours. Hour

meter dont work. The last 2 owners

RAWLINGS WOOD HOGS - WWW.WASTEWOODHOGS.COM

our considered R A W L I N G S W O O1-866-RocWear D H Oupgrade G S - (866-762-9327) W hog, W Wwe. W ASTEWOODHOGS.COM

Handles logs up to 32”. Uses

❘

R

manuals and receipts. Purchased A Proven Leader in Wood Reduction Equipment and Technology

Best Value Portable Log Splitter

Lumbermens™  since 1986

Item ID 13185. Sam x702

Custom Wood Grinding Systems

RAWLINGS WOOD HOGS - WWW.WASTEWOODHOGS.COM

VERTICAL & HORIZONTAL have only used it to MODELS AVAILABLE

load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

R

Item ID 13694. Sam x702 R

94 Barko 275 - Excellent value

RAWLINGS WOOD HOGS - WWW.WASTEWOODHOGS.COM

with low at hours at 3,500. 5.9 RAWLINGS WOOD HOGS - WWW.WASTEWOODHOGS.COM

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

1990 Bell Super T - This Bell has

a brand new Duetz engine. Lever WOODWASTEHOGS.COM control, 33” bar, pump and tranny RAWLINGS WOOD HOGS - WWW.WASTEWOODHOGS.COM RAWLINGS WOOD HOGS - WWW.WASTEWOODHOGS.COM

1-866-ROCWEAR (762-9327) ❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 11

Phone 315.284.4126 Fax4500 hours.

1995 JOHN DEERE C6 TREE FARMER 315.849.2045 Item ID 13883. Austin x703 Website Only 20 hours on a new 5.9 www.empirehyd.com Cummins engine.

The wholeEmail 2006 JOHN DEERE 748GIII “Precision Under Pressure” info@empirehyd.com

center has been fixed, and line bolt redone, transmission is tight, center pins are good. It has a full speed tranny, with two reverse, with a winch.

Working daily.

Item ID 13920. Austin x703 2004 648GIII JOHN DEERE DUEL ARCH SKIDDER Slick Machine. Runs good motor is in top notch condition.

Item ID 13610. Sam x702

2004 JOHN DEERE 648GIII This machine has 13000 total hours on the body, with only 3000 hours on the new motor, comes with a set of chains, working daily.

Item ID 13878. Austin x703

8700 hours, running daily.

Item ID 13881. Austin x703

2006 JOHN DEERE FIREWOOD PROCESSOR This is a Chomper super 14, with a 60hp engine. In very nice shape. Only 171 hours, comes with green chain conveyer. All of the manuals for the engine, and the chopper itself come with it, as well as all of the electrical schematics.

Item ID 13894. Austin x703 2012 JOHN DEERE 548GIII Single arch with winch, blade extensions, 1 new 28L and 3 @ 50%. This is still a new machine with only 3600 hours.

Item ID 13780. Sam x702

13428 // PO Box 124 2006Victory JOHNLn. DEERE Adams Center, 700J DOZERNY 13606 2009 JOHN DEERE 648H

This work horse comes with a winch, and new undercarriage, it is tight and dry & running daily with

This is a one owner machine, every switch works, interior is very clean, radio, heat/ac.

Air ride works as it should.

Tires are 30.5x32. Extremely clean machine with no leaks.

Cutting edge on blade is excellent, with no cracks or welds anywhere.

Item ID 13747. Austin x703 FRANKLIN

‘16 Halverson H140 1995 FRANKLIN 170 Skidsteer (DEMO) Enclosed cab, single arch with a

Item ID: winch, newJW-909632 paint, 4 brand new Contact: J Williams 23.126 firestone tires, around Ph: (888) 401-6367 x701 15000 hours.

Item ID 13910. Austin x703

2003 FRANKLIN Q80 GRAPPLE SKIDDER 7500 hours, but just 5000 hours on reman engine. New Radiator; New Hydraulic Pump; Comfort cab with good working heat and air; Tires at 80%.

Item ID 12450. Sam x702 ‘13 KMC 2500 Track GRINDMASTER

Skidder SUDDRETH HORIZONTAL

GRINDER Item ID: 14078 This is a 60 HP low rpm Contact: Austin Horizontal grinder,x703 comes Ph: (888) 401-6367 with a blower, and the blower connects to the grinder with aoffpipe. has top This and isbott om onto aItconveyor. a very infeed rolls. Overall lightly

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is a Chomper Model 16 PDA

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 403

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

3-5

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

used, in really good shape.

Width capacity is around 30” maybe even wider.

Item ID 13889. Austin x703 HYDRO-AX

1998 AX180B 611EX SAW ‘93 HYDRO Barko HEAD FELLER BUNCHER Item ID: 14077 with about 8800 hours.

Contact: Austin Bunching Saw Head has large Ph: (888) 401-6367 x703 pocket for accumulation and lifting side shield for notching larger trees before felling. Cummins engine. 28L tires at 60%. Decent running condition.

Item ID 13245. Sam x702 2002 HYDRO AX 621E Arouund 12,000Deere hours onC6 this ‘95 John machine. Working daily.

Tree Farmer Item ID 13884.

Austin x703 Item ID: 13920 Contact: Austin 1998 711EX SAW HEAD Ph: FELLER (888) 401-6367 x703 BUNCHER 30.5-32 tires at 40%; Cummins Engine rebuilt 1500 hours ago; 8750 hours; Quadco 22” Large capacity!.

Item ID 13421.

Sam x702 tree saw head.

Heat and A/C BARKO work. New bearings in saw.

1994 Barko 160B - Electric Cutting trees today. knuckleboom, 30' boom, 75hp Item ID 13353. Sam x702 motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 13

Phone 315.284.4126 Faxblade; Undercarriage at 90%; KMC 315.849.2045 Excellent Condition!

KMC TRACK SKIDDER 2500P Website Item ID 13459. Sam x702 www.empirehyd.com John Deere Dual Arch Grapple,Email “Precision Under Pressure” info@empirehyd.com John Deere winch, Model 4000,

Cummins Engine, Model 6BTA, Clark Transmission 28000.

Item ID 13738. Austin x703 KOMATSU

2007 KOMATSU PC220LC w/2009 Log Max 7000XT processing head. 9700 hours on carrier. 7200 hours on Log Max. Excavator style. Cab guard. Flotation pads. One owner. Very good condition.

Item ID 13464. Sam x702

2014 KOMATSU 450 Only 1100 hours on this machine, in excellent condition.

Item ID 13937. Austin x703 LIEBHERR

2007 LIEBHERR A924C LOG HANDLER RUBBER TIRED LOG LOADER 13,000 hours. 40’ Reach with two section boom. 60” Log Grapple with continuous rotation. Fixed Cab Riser with cab guard protection.

2008 KOMATSU D61-EX DOZER Front push blade. Tight and Great Condition. 4511 Hours. dry. Cleaned, Serviced, and Komatsu U/C at 95%. 35% Checked out for service. Can Pads. 6 Way Blade. Fully pull loaded trailer. 4-Wheel Enclosed comfort cab. Great drive and steering. Top Quality price! machine. Would be great for Item ID 13570. Sam x702 log yard or mill work.

Item ID 13476. Sam x702 13428 Victory Ln. // PO Box 124 2012 KOMATSU D61EX 15 Adams Center, NY 13606 DOZER 2011 LIEBHERR A904 with only 750 Hours. Triple RUBBER TIRED LOG HANDLER Rippers; Limb Sweeps; Enclosed Liebherr 4 cylinder engine with cab with Heat/AC; 6 way great fuel economy. 11,230

hours. Fixed cab riser. Two section boom with 38’ reach.

Cab protection. 4-Wheel drive and steer. Can pull loaded trailer. Cleaned, serviced and inspected. Tight and dry and ready for work. Located in ‘16more, Halverson H140 Balti MD. Item ID 13477.

Sam x702 Skidsteer (DEMO)

Item ID: JW-909632 2011 LIEBHERR Contact: J Williams A924 RUBBER TIRED x701 LOG Ph: (888) 401-6367 HANDLER Liebherr 4 cylinder engine with great fuel economy. 11,230 hours. Fixed cab riser. Two section boom with 38’ reach.

Cab protection. 4-Wheel drive and steer. Push blade. Can pull loaded trailer. Cleaned, serviced and inspected. Tight and dry and ready for work.

Located in Balti more, MD. ‘13 KMC 2500 Track Item ID 13478. Sam x702 Skidder LINK-BELT Item ID:LINKBELT 14078 1997 3400 Contact: REBUILTAustin PIERCE STROKE Ph: (888)DELIMBER 401-6367 x703

36” Pads on 60% undercarriage. 5221 hours. off onto a conveyor. This is a very Good running condition.

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

vans and produce 6 - 8 loads per

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 403

adjustable to single two way. Great

Well maintained. Item ID 13294.

Lumbermens™  since 1986

❘

grapple, 5,000 original hours.

(excellent condition.). Item ID

good. in good working order. 22in

50% or better. 475 hp Cummins

Firewood Processor - This is a Rotary Dryers homemade processor with a 10’ Sand Dryers logGrain deck.

Has a hydraulic grapple, Dryers Lumber chain andKilns kicker that all runs off Cement Kilns of a 4 cylinder Mercedes power Brick Kilns unit. Has a 4’ chain saw that kicks

motor, Rotobec continuous

tach, oil pressure, water temp and

low hours. Control panel includes

but electronic option is available.

Value! PA. Item ID 12062. Sam x702

knuckleboom, 30' boom, 75hp

- Pumps recently redone. 400 hrs

Has Log Lift. Uses 4-way wedge

quality chips with patented ‘Cone’

1997 MORBARK MODEL 2400 CHIPPER ‘95 John Deere C6 Has a Cumins diesel engine Tree and runs Farmer great. All fluids and Item ID: been 13920 filters have changed.

Contact: AustinSam x702 Item ID 13429.

Ph: (888) 401-6367 x703 1999 MORBARK 1400 TUB GRINDER Loader 4200 Sam hours; capacity!.w/Cab; Item ID 13421. x702 Very good conditi on. Located BARKO in PA. 1994 Barko 160B - Electric Item ID 13361. Sam x702

with John Deere power unit with

day. Item ID 13882. Austin x703

condition. Easily produces high

Morbark 1000 Knuckle boom Item ID: 14077 loader, 3 knife disc, Newer Contact: Austin discharge chute, New banding Ph: (888) 401-6367 x703 around disc, Brakes and tires are also OK, Everything works well Newer clutch -with outboard bearing, Had Cummins KTTA 750 HP engine -- needs repower.

Item ID 12443. Sam x702

automatice firewood processor 1995 Barko 775 B Feller Buncher Clean-Burn Design

drum design. Can easily load 42’

with 1700 hours, in very good

1987 MORBARK 27 WCL

NEEDS MOTOR ‘93 Barko 180B

Innovative 13238. Chris x700

a Chomper Model 16 PDA

amp gauges. Cuts logs up to 16”.

Manufacturing a full line of biomass fired One chain conveyer, 8 way splitter, on combustion systems backed with fifty years of owner and comes with all 20,000lb goose neck trailer.

Item ID manuals and receipts. Purchased innovative clean-burn design. Diverse in every way with multi-fuel blending capability.

Hurst 13916. Austin x703 new for $32,500. Item ID 13865. stokers utilize hundreds of common and Sam x702 Best Value Portable Log Splitter abundant solid biomass fuels.

- Small manufacturer in PA has Large or small scale, project LOGGING EQUIPMENT management is eased with the made the best valued log splitter.

BANDIT impressively short installation time Handles logs up to 32”. Uses 1999 Bandit 1900 Tracked Disc required with prefabricated 13HP Honda motor. Manual start Chipper - Cat Under Carriage at modular components.

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

Owner just spent $30,000 on upgrading delimber.

Item ID 12992. Sam x702 MORBARK

Diesel. 7500 Hours. One owner.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

on injection pump. always started kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

50

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

YEARS control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

it includes two sets of Mcdonough pressure guides. Top Casting wheel

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 15

Phone 315.284.4126 Fax 2006 MORBARK 6600 WOLVERINE HORIZONTAL GRINDER315.849.2045 Website 1995 MORBARK Approx. 6000 hours onwww.empirehyd.com this Email WOLVERINE 3-WHEELED well maintained “Precision Under Pressure”machine. info@empirehyd.comFELLER BUNCHER

Has New Cat Dealer Rebuild 1000HP Engine at 5000 hours.

42” X 66-5/8” Hammermill; variable speed infeed system; Hammermill drive includes all belts, sheaves, bushings & shields. Engine gauge panel & emergency shut down system located in an anti-theft console. Electronic rpm sensor & auto feed system. 430 Gallon fuel tank. 238 Gallon hydraulic oil tank. IQAN control system.

Dust suppression system. Hyd operated debris containment door. 16 Function radio remote.

Super package! Optional new knife skin - $20,000 which is half price of new.

Item ID 12692. Sam x702

S/N 4073. Only 1000 hours on new JD 4 cylinder engine.

Recently replaced turbo. 23.1 tires at 50%. 16” Rapid Buncher shear head. Machine is fast and in very good condition.

Item ID 12531. Sam x702 PRENTICE 1988 PRENTICE 210B New battery and starter a year ago, new alternator less than 2 years ago. Continuous rotation grapple, has 3-53 detroit engine, lever controls, plumbed for bucksaw. Mounted on a 1978 GMC Brigadier with 6-71 detroit with a 10 speed.

Runs everyday.

Item ID 13703. Sam x702

1992 PRENTICE 210D LOADER MORBARK 1200 TUB GRINDER 13428by Victory Ln.Cat // engine, PO Box 124 Excellent condition, very tight Powered a 3412 NY 13606 600-hp.Adams Tilt Center, tub. Hours are loader mounted on a 1989 Mack unknown. Please call Daren at truck with very good tires.

Item ID 13654. Sam x702 Ext. 702 for more details.

Item ID 12919. Sam x702

1997 PRENTICE 210E New 5.9 cummins engine, turntable bearing and seal, fuel pump and battery. Joystick, Heat and A/C, boom repinned, cylinders repacked. Total hours at 12000. Bucksaw hookup.

‘16 loader Halverson This is used toH140 feed a chipper.

Skidsteer (DEMO) ItemID: ID JW-909632 13795. Sam x702 Item

Contact: J Williams 210E Ph:1999 (888)PRENTICE 401-6367 x701 Comes with a bucksaw. Levers, 11000 hours. Repacked all cylinders and valve body. This loader has only been used to cut up logs into 9’ lengths.

Never used as a delimber loader.

Item ID 13784. Sam x702

2014 PRENTICE 2384C PACKAGE ‘13 LOADER KMC 2500 Track with CSI 264 Ultra Delimber Skidder and Rotobec 4048 Grapple.

Only hours! Mounted Item 1050 ID: 14078 on trailerAustin with hydraulic Contact: stands.

Ph: (888)Excellent 401-6367 conditi x703 on.

Contractor shutting down job.

Item ID 13577. Sam x702 off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 403

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

2432 2010 PRENTICE SKIDDER It has 30.5 tires al the way around and has 6,000 hours on the machine.

Item ID 13382. Sam x702

‘93 Barko 180B

ItemPRENTICE ID: 14077 310E Contact: Good loaderAustin for the money.

Ph: (888) 401-6367 Item ID 13762.

Samx703 x702 PRENTICE 120C BOOM TRUCK Great tires, new paint, & lights, with a 350 Cummins Engine 3 stage jake.

Item ID 13900. Austin x703 1994 PRENTICE 180D LOG ‘95 John Deere C6 LOADER Treehours, Farmer 11,793 Machine is in good on, it has been Itemconditi ID: 13920 sand blastedAustin and painted, low Contact: proPh: tires 17.5.

(888) 401-6367 x703 Item ID 12759. Sam x702 210 PRENTICE LOADER MOUNTED ON 2006 TRAILER BARKO Excellent conditi on.

1994 Barko 160B - Electric Item ID 13505.

Sam x702

capacity!. Item ID 13421. Sam x702

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 17

Phone 315.284.4126 LATE 80’S PRENTICE 210 Faxtrack and dolly system, which 315.849.2045 makes it easy to move. Has a LOADER Website This is a late 80’s model, itwww.empirehyd.com had a magnetic head roller, 48” rotor new motorUnder installed 2 years agoEmailwith 28 teeth and a 700hp “Precision Pressure” info@empirehyd.com

with around 3,000 hours on it, also comes with a circle saw.

Item ID 13879. Austin x703

1998 PRENTICE 210E It has the 600 turbo charged cummins engine, control valves have been redone, ac/ heater work, it also has slasher saw hook ups. Dry machine, working daily.

Item ID 13913. Austin x703 ROTOCHOPPER

C-18 Caterpillar power unit.

This rotochopper sells for over $600,000.00 new.

Item ID 13838. Sam x702

2000 TIGERCAT 845B it has 8900 hrs. the Hydraulic Pump haIGERCATs 2000 hrs on it. We replaced the saw pump last summer. Ready to go!

Item ID 13619. Sam x702

2000 TIGERCAT 845B This 845B has 14000 frame hours with 5000 hours on an 8.3 cummins engine.

New sprockets, bottom and top rollers, rails, idlers, 36” tracks, seat and all new A/C parts. Track adjusters, and all cylinders on head have been repacked. Comes with a 22” 13428 Victory Ln. // PO Box 124 hotsaw with 45 degree rotate.

2014 B66TD Adams ROTOCHOPPER Center, NY 13606 This is a very clean cutter, This machine is still like new with only 1300 hours on rotor owner just wants to update.

Item ID 13939. Sam x702 and 1600 on engine. This is a 2011 MC266T ROTOCHOPPER This is a great chipper with only 3600 hours. It has a 500hp C15 Caterpillar power unit. Comes with spare bolts, teeth, screens and bearings.

Item ID 13837. Sam x702

2004 TIGERCAT 240B KNUCKLEBOOM New 5.9 cummins crate engine with 2500 hours, turntable good, 243 CSI delimber, good tires, brakes, and lights. 7500 hours.

Item ID 13666. Sam x702

‘16 Halverson H140 2004 TIGERCAT 620C Skidsteer (DEMO)

Single new engine 2 months Item arch, ID: JW-909632 ago, has about 13,500 hours, needs Contact: J Williams aPh: couple of windows.

Tires at 50%.

(888) 401-6367 x701 Item ID 13667. Sam x702 2004 TIGERCAT 630C New 35.5’s on rear and 25% on front, comes with 2 spares.

Engine has 4500 hours, with 12000 machine hours. Two new wiring harness.

Item ID 13749. Sam x702 TIGERCAT ‘132004 KMC 2500845B Track with Waratah 622 Processor.

Skidder New screen, wheels, sprockets and wheel motor. Owner used Item ID: 14078 itContact: for a month before parking Austin it.Ph: 5,000 on 8.1 x703 cummins (888)hrs.

401-6367 engine, and 6990 total hrs.

Item ID 13625. Sam x702 off onto a conveyor. This is a very

well built processor. Item ID 13820.

When You Buy Your Circular Saws From B.H. Payne You’ve Bought the best... We Guarantee It!

‘05 Gehl CTL 70

Item ID: JW-986495 Traditional Quality Combined Contact: J Williams With Todays Technology Ph: (888) 401-6367 x701

‘83 John Deere Call 800 752-0627 Circular Saws 4850 Make Sure To Ask For Our Free, Complete Saw Catalog Saw Bits and Shanks Quality Brand Reg. U.S. Pat Off

chain conveyer, 8 way splitter, on Circular Knives We Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth Item ID: 14073 Carbide Tipped Saws 20,000lb goose neck trailer.

Item ID Contact: Austin Carbide Strobe ® Saws Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also AustinTips, x703 Payne 401-6367 & Company Stock Ph:B.H. (888) x703 & Sell Bits & 13916.

Shanks, Carbide Diamond Wheels, Saw Manufacturers Knife Grinding Wheels, Gumming Wheels & Knives.

BestSaw Value Portable Log Splitter

withHere’s 1700 hours, in very - Small in PA has What You Get good With Every B.H. Paynemanufacturer Saw

condition.

Easily produces madeQuality the best valued logSteel. splitter.

• Saws manufactured fromhigh only the Highest Nickel Alloy

Sam x702

Firewood Processor - This is a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and

P.O. Box 90608 Brewco Saws - Two Brewco Saws East Point, GA 30364 in excellent condition. Runs great.

404 761-8711 Item ID 13644. Sam x702 Fax 404 761-5398

FIREWOOD PROCESSORS

2010“Since Shop Built Wood Processor 1890” - It has a 353 Detroit diesel, 40

inchE-mail: insert tooth circle saw, 30 foot info@paynesaws.com  Issue 364 403

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit.

4’ chain saw that kicks WebHas Site:a www.paynesaws.com

Lumbermens™  since 1986

❘

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

14’ Pusher good.Snow in good working order. 22in

approximately 1500 hours. Hour

Sam x702

LOGGING EQUIPMENT BANDIT

Diesel. 7500 Hours. One owner.

B.H.EDGERS Payne &&Company, GANGS Inc.

grapple, 5,000 original hours.

Ph:for (888) 401-6367 new $32,500.

Item IDx701 13865.

manuals andJ receipts.

Purchased Williams Contact:

day. Item ID 13882. Austin x703

Has Log Lift. Uses 4-way wedge

motor, Rotobec continuous

One owner and comes with all Item ID: JW-113876

1999 Bandit 1900 Tracked Disc

but electronic option is available.

knuckleboom, 30' boom, 75hp

Item JW-492406 kohingID: head. head works great.

Contact: J Williams Item ID 13185. Sam x702 Ph: (888) 401-6367 x701

‘11 Doosan DL200

amp gauges. Cuts logs up to 16”.

• Each Sawwith Milled with State-Of-The-Art Precision Milling Machine. quality chips patented ‘Cone’ Handles logsCNC up to 32”. Uses • We Tension Your Saw to Your RPM Speed BEFORE Leaving Our Factory. drum design. Can easily load 42’ 13HP Honda motor. Manual start • Your Satisfaction - Completely Guaranteed. vans and produce 6 - 8 loads per

2005 TIGERCAT 230B Tight, and dry machine, with 16,000 hours on the machine, new motor put in around 10,000 hours, CTR Delimber trailer included, and reversible CSI Bucksaw, will sell ‘93orBarko 180B with, without Bucksaw.

ItemID ID: 14077Austin x703 Item 13911.

Contact: Austin Ph:2005 (888)TIGERCAT 401-6367 822 x703 TRACKED FELLER BUNCHER Good running condition.

Tigercat 22” Hot Saw with 40 degree tilt. New center bearing and swing motor. Undercarriage at 50% or better. Very clean.

High hours, but well cared for by single owner of land clearing business. Often idled for hours.

‘95 John Deere C6 Total hours 19,500.

Tree Item ID Farmer 13575. Sam x702 Item ID: 13920 2006 TIGERCAT Contact: Austin 630C SKIDDER Ph:GRAPPLE (888) 401-6367 x703 Very good running condition.

Dual Arch grapple. New 35.5 tires. Only 4500 hours. Winch. capacity!. Item ID 13421. Sam x702 Compare to new 630 at BARKO $310,000!

1994 Barko 160B - Electric Item ID 13576.

Sam x702

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

‘05 Transport Sam x702 Trailers Custom 2004 Bandit Beast Model 4680 Log Pup

Well maintained. Item ID 13294.

3412 Caterpillar Diesel engine

Item ID: JW-538174 with 850 HP. 5300 hrs. Mill in Contact: J Williams good condition.

Just finished Ph: (888) 401-6367 x701 10

Acre clearing job, ready to work!

Remote control. Big production Waratah 624 Super - New

Computer for head  List  seLL  exchange  (Logrite). buy  save 10500 hours. New main pump

1999 Barko 160D - new engine with meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

‘04 Fabtek 344Bvalue 94 Barko 275 - Excellent

Item ID: JW-093430 with low at hours at 3,500. 5.9 Contact: J Williams CUMMINS continuous grapple.

Ph: (888) 401-6367 x701

Runs Great!. Item ID 13740. Sam

x702 Processor - This is a Chomper

BELL

super 14, with a 60hp engine. In 1990 Bell Super T - This Bell has very nice shape. Only 171 hours, a brand new Duetz engine. Lever comes with green chain conveyer. control, 33” bar, pump and tranny All of the manuals for the engine,

and ❘the chopper itself come with  LumbermensCO.com it, as well as all of the electrical

** CALENDAR**

2007 TIGERCAT 250B W/WARATAH PROCESSOR 2007 Tigercat 250B Crawler with 2005 Waratah 622B Processing Head. 9500 hours. The 622B Waratah head is in great shape.

3 new wheel motors on the head all new pins and bushings. Head has been The totallyTree rebuilt less than that Started 500 hrs ago. The swing motor on the carrier has just been rebuilt it All! and a new Hydraulic pump. U/C Since 1986, Currently Lumbermens has at 50%. processing published a monthly circular 600 tons/day. Runs great. reaching sawmills, loggers, Owner shutting down. pallet makers, recyclers and Item ID 13360. Samplants x702 industrial woodworking

fire suppression system. Tires are upgrades and repairs. Fecon Mulching Head.

30.5 X 32 with 20% front,NY 1 new STATEBH250 WOODSMEN'S FIELD DAYS Item ID- 13502. x702 rear and 1 rear at 50%, 4 Fri, tire 18 August Sun, 20Sam August chains at 40%. Dual arch and no Boonville, New York 2011 TIGERCAT 620D winch, extra fuel tank and tight www.starwebhosting.net/woodsmen/ center pins. Excellent skidder This is a low hour skidder with ready to start dragging wood. onlyFOREST 5500 hours on a cummins SOUTHWEST PRODUCTS EXPO Item ID 13928. Sam x702 a fire Fri, 25engine Augustand - Sat, 26 suppression August system.

Comes mounted on Hot Springs, Arkansas 2009 TIGERCAT H250 35.5 tires at 50% back and www.arkloggers.com TRACKED HARVESTER 40% front and good chains on 72NDallANNUAL GREAT Tigercat Model 575 processing 4 tires. Has the LAKES bigger 630 LOGGING & HEAVY EXPO head. 10,880 hours. U/C at axles and EQUIPMENT no winch. Center Thurs, 7 Sept Sat, 9 Sept 60%. Everything runs well and pins are tight and extra fuel Michigan has been very well maintained. Escanaba, tank.

Item ID 13592. Sam x702 Item ID 13929. Sam x702

2009 TIGERCAT 620C PUBLISHER This skidder only has 10575 Woods Publishing hours with a cummins engine and ADVERTISING SALES

Selma, TRACKED MULCHER Just North over Carolina 4000 hours. www.midatlantic-logging-biomass­ 3410 hours. $32,000 in recent 5400 head and 340 degree MID-ATLANTIC expo.com/ LOGGING & BIOMASS EXPO

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept Sat, 16 Sept 2010 TIGERCAT 480 2011-TIGERCAT 845C

worldwide.

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

FELLER BUNCHER 10 hours on this machine since it 2950hrs.

30.5 tiitres. new has been rebuilt, hasLike a 24foot in machine. One owner. Very well feed deck 20 foot out feed deck maintained. with inch wheels, andx702 all the Item44ID 13528.

Sam

bells and whistles, its a production

2014 630 machine, withD airTIGERCAT strain conveyers

1300hrs like new inside by that go up and down, with35 airbags, 15, CB, light package, large it includes two sets of Mcdonough grapple and wench. pressure Casting Item IDguides.

13408.Top Sam x702wheel is supported on both sides. This

is an extremely accurate machine in ve1y good condition, Cuts 130

Proudly feet a minute also hasmade CLT presses. in the USA

Item ID 13876. Austin x703 S & W 125 Band Mill with

Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

AD SUBMISSIONS

BANDMILLS & HEADSAWS

Danckaert Band Resaw724E - Roughly 2012 TIGERCAT

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

Item ID 13927. Sam x702

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

MAILING ADDRESS

FOR CLASSIFIEDS Call 888.401.MENS rotation, undercarriage at 70%.

SeeMercedes pictures, engine prices, and and fire suppression Thisat Location of allsystem. equipment is a great buy for for such a www.LumberMB\ISmagazine.com super clean track cutter.

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

with onboard log turners, carriage drive, hyd pac for carriage,

All Our Able To Be Towed Safely At30 Highway Speeds MayOf be sent to­ Splitters cabinet with electronic drives for Detector's Inc. ..............

Bell's Are Machining .....................

27 Metal

morris@lumbermens.co

POSTMASTER

Buck Equipment (AIM) ........ 36 • Firewood Processors • Wood Splitters Corley Mfg .............................. 32 CRD Metalworks .................... 25 • Bundlers The Lumberman's Exchange is CW Mill-ArmorHog .............. 17 published monthly by Woods • Grapples CW Mill-Hogzilla ................... 15 Publishing, P.O. Box 1916, Columbia, TN 38402. All rights Dyna Products ........................ 35 • Conveyors reserved.

All editorial/ advertorial submissions are used at the Empire Hydraulics ................... 8 discretion of the publisher and may • Skid Steer Splitters be edited for purposes of clarity Great Lakes Mfg. .................... 34 and space. Although all efforts have • Open to customization Hahn Machinery ...................... 3 been made to ensure accuracy of Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

Hurst Boiler ............................. 14

48" bottom saw and 36" top saw

Morbark ..................................... 9

STACKING RAC

Multitek ................................... 12 Piper's Saw Shop.................... 13 Rotochopper............................ 40 Row Electric ............................ 20 Sawmill Exchange .................. 11

Invest Less - Produce More! www.bruteforceusa.com Smith Sawmill ........................... 4 Select Sawmill ......................... 19

The Paul Bunyan Show ......... 39 Thomas Industrial Controls..... 10

CONTACT FOR PRICING Iron Bull ................................... 21 Union Grove Saw & Knife.. 2, 37

Call 715-678-0037

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Email: sales@bruteforceusa.com www.BakerProducts.net Lignomat ................................. 24 WoodMizer ................................ l

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

800.S48.6914 I S73.663.7711

❘

 24/7 SUPPORT 0

❘

 (888) 401-MENS L!

NO. 19

Phone 315.284.4126 Fax5.9 2014 TIGERCAT 630D liter 360 GRAPPLE SKIDDER 315.849.2045 roatati on on the Website Dual Arch Grapple. Just www.empirehyd.com 1990 a 30’ reach on hours.

3 Under year/5000 PTEmailJoystick Controls, “Precision Pressure”hour info@empirehyd.com

Continuous grapple w/ the boom. triple pump hydraulics, Stick and swing function w/ a fully enclosed Cab. Machine is located in Florida.

Item ID 13643. Chris x700

$310,000!

Item ID 13576. Sam x702 2014 630 D TIGERCAT 1300hrs like new inside 35 by 15, CB, light package, large grapple and wench.

‘16 Halverson Item ID 13408. SamH140 x702

1997 TIMBCO 820C CLAM BUNK FORWARDER “4000” original hours. 20.3 x 25 rubber at 70%. Hand sanded and painted, brand new computer and Scorpion ‘93 Barko 180Bspeed controls, added Item ID:214077 control. sets of tracks , AustinLocated in allContact: new Lexan.

Ph: (888)Canada.

401-6367 x703 Alberta, Customer will pay shipping to closest US entry point.

Item ID 13532. Sam x702

BELL’S FIREWOOD PROCESSORS

warranty. 35.5 tires with dualing rings at 60%. Wide blade. Winch.

Item ID 13526. Sam x702

Skidsteer (DEMO)

2015 TIGERCAT 234B 2014 Item ID:TIGERCAT JW-909632630D TIGERCAT 250T LOADER GRAPPLE SKIDDER Contact: J Williams TRACK LOG LOADER Model 234B. Only 300 hours Dual Arch Grapple.

Ph: (888) 401-6367Just x7011990 on this machine, this machine Cummins 8.3 engine and hours. 3 year/5000 hour PT is extremely fuel efficient, and pumps have been done warranty. 35.5 tires with dualing probably 8,000-9,000 hours rings at 60%. Wide blade. Winch. very quiet. In the cab, hasDiesel • 67 HP itCAT heated and cooledEngine seats. runs ago. It has 45,000 hours.

Item ID 13526. Sam x702 This machine has never run like new.

TIMBCO • 44” Circular Saw Item ID 13880.•Austi x703 in the woods. It has been 20” nDiameter 1996 TIMBCO T425B FB in a yard the whole time. w/2008 Rotosaw Intermittent Capacity 99 TIGERCAT 240B LOADER • Single JoystickTracks are around 50% Saw Head. Machine has This loader is Control a package and this machine has been 540 degree non continuous deal, portable, • and mounted 30 Ton Splitter extremely well taken care rotation on upper. 9900 hours. on a dump truckCylinder from the of!

‘13 Undercarriage.

KMC 2500New Track New glass Item ID 13608. Chris x700 eighties. Also this loader can inSkidder cab. Very good running • 67 HP CAT Diesel be mounted back on its trailer condition.Engine Rotosaw has 360 2006 TIGERCAT 630C with delimber. It has 4509 hrs Item ID: 14078 Circular degree •• 44” rotati on.Saw Cummins 13428 Victory Ln. // PO Box 124 20” Diameter GRAPPLE SKIDDER• 67 HP CAT6CT8.3 on a reman Cummins engine.

Contact: Austinwith 215 HP. Diesel engine Capacity Center, NY 13606 Very good running condition.

ItemAdams ID 13455.

Sam x702 Ph: (888) 401-6367 • Single Joystick x703 Engine Machine runs great. Working Control 44” Circular Saw Dual Arch grapple. New• 35.5 • 30 Ton Splitter today. in select hardwood • 20” Diameter Cylinder TIGERCAT 230B tires. Only 4500 hours. Winch.

Capacity Item ID 13548. Sam x702 • Single off onto a conveyor. This is a very This Tigercat has a Cummins Compare to new 630 at Joystick

1998 TIMBERLINE STROKE 4000 SERIES

DELIMBER 8400 hours. U/C at 60%. Will crank and run. Owner retired.

Machine idle for past year.

‘95 John Deere C6 Item ID 13599. Sam x702

BELL’S FIREWOOD PROCESSOR Tree Farmer BELL’S FIREWOOD1999 PROCESSORS TIMBCO 820D CLAM Item ID: 13920 BUNK FORWARDER Contact: Austin 10,300 hours.

New x703 engine Ph: (888) 401-6367 SERIES less than 500 hours 4000 ago. Can accept bunks, but none with machine. Owner has two sets 4000 SERIES capacity!. Item ID 13421.

Sam x702 of tracks like new he will add BARKO for additional $20,000.

1994 Barko 160B - Electric Item ID 13494.

Sam x702

BELL’S FIREWOOD PROCESSO

BELL’S FIREWOOD PROCESSOR

BELL’S PROCESSORS Many ModelsFIREWOOD & knuckleboom, 30' boom, 75hp Control well built processor.

Item ID 13820. motor, Rotobec continuous Options• to Choose From!

30 Ton Splitter • 67 HP CAT Diesel 4000 SERIE

4000 SERIES BELL’S FIREWOOD PROCESS IntegrIty • PrecIsIon • QualIty • Value BELL’S BELL’S FIREWOOD PROCESSORS ManyPROCESSORS Models & FIREWOOD Cylinder

Engine Sam grapple, 5,000 original hours.

•x702 67 HP CAT Diesel • 44” Circular Engine Saw Firewood Processor (excellent condition.). Item ID • Diameter 44” Circular Saw - This is • 20” • 20” Diameter Capacity Options to Choose a Chomper Model 16 PDA 13238.

ChrisFrom! x700 • 67 HP CAT Diesel 4000 SERIES Capacity • Single Joystick FIREWOOD TUMBLER Engine • Single Joystick automatice firewood processor 1995 Barko 775 B Feller Buncher Control • 44” Circular • Saw Sturdy HSS Steel Welded Control • 30 Ton Splitter JW-986495 • 20” Diameter with•John power unitModels with recently redone. 400 hrs 30 TonDeere Splitter Many &- Pumps FIREWOOD TUMBLER • 4’ Diameter Barrel Cylinder Capacity Cylinder

‘05 Gehl CTL 70

Item ID: Contact: J Williams Sturdy HSS Steel Welded • 67hours.

HP CAT Diesel • Single Joystick 4000 SERIES pump. always started low Control panelto includes on• injection Options Choose From!

• Clean Out Chute • 4’ Diameter Barrel Engine Ph: (888) 401-6367Control x701 • 67 HP CAT Diesel 4000 SERIES • Clean Out Chute • 44” Circular Saw • Removes Debris & Bark asand large good. as 2 in ¼”good tach, oilHPpressure, water temp working order.

22in SER • 67 CAT Diesel • 30 Ton Splitter 4000 Engine • 20” Diameter • Removes Debris & Bark as large as 2 ¼” Cylinder Engine Capacity •• Works with all of our Double chain Hydraulic Lift conveyors 44” Circular Saw • Works with all of our Double chain Hydraulic amp gauges.

Cuts logs up to 16”. kohing head. head works great.

••Single 44”Joystick Circular Saw 20” Diameter • Optional Honda Power Pack Available TUMBLER Control Honda PowerFIREWOOD •• Optional Capacity • 20” Diameter One owner and comes withPack all Available Item ID 13185. Sam x702 chain conveyer, 8 way splitter, on

Woodmaster

‘83 John Deere 4850

• 30 Ton Splitter • Sturdy HSS 84/85 Steel Welded John Deere Item ID: 14073 See why we are your BeSt Source for bandsaw blades! • Single Joystick Cylinder Capacity Many1999 Models &&160D - new engine with • 4’ Diameter Barrel Many Models 20,000lb goose neck trailer. Item IDControl manuals receipts. Purchased Barko Contact: Austin • Singleand Joystick • Clean Out Chute 440B/C Ton Splitter Options to Choose From! offer the highest quality welds ourx703 people use the • 30 Options Choose • Removesto Debris & BarkFrom! as large 2 ¼” Hour 13916.and Austin new Control for $32,500. Item ID 13865. approximately 1500as hours.

Ph: We (888) 401-6367 x703 Cylinder ID:Double 13908chain Hydraulic Lift conveyo • 30 TonMany SplitterModels & • Works with Item all of our highest level of integrity and precision to give you the best Sam Cylinder x702 Best Value Portable Log Splitter meter dont work.

The last 2 owners • Optional Honda PowerSam Pack Available Contact: Options to Choose From! bandsaw the business—we ship all overinthe Many Models & FIREWOOD TUMBLER with 1700 hours,blades in veryin good - Small manufacturer PAUS. has LOGGING EQUIPMENT have only used it to load trucks or Made In Ph: (888) 401-6367 x702 Wood-Mizer LT40 FIREWOOD TUMBLER

Satisfaction guaranteed! condition. Easily produces high always made the best valued log splitter. quality chips with patented ‘Cone’

Handles logs up to 32”. Uses

vans and produce 6 - 8 loads per

but electronic option is available.

drum design. Can easily load 42’ day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

13HP Honda motor. Manual start

thIn Kerf

Band saw Blades

Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702

Options to Choose From!

Canada • Sturdy HSS Steel Welded

BANDIT backup as needed.

••as Sturdy HSS Steel WeldedHas a CTR 4’ aDiameter Barrel Item ID: 13995 • 4’ Clean Out Chute • Diameter Barrel FIREWOOD TUMBLER 1999 Bandit 1900 Tracked Disc grapple has been rebuilt.

Many Models &•delimber, Contact: Austin Removes Debris & Bark as large as 2 ¼” • Sturdy HSS SteelTUMBLER Welded• FIREWOOD Clean Out Chute •x703 Sturdy HSSat Steel Welded Works cylinders withDebris all of our Double Hydraulic Made In • 4’ Diameter Options toBarrel Choose From!

Ph: (888) 401-6367 Chipper - Cat Under Carriage have minor leaks.

••Boom Removes & Bark aschain large as 2 ¼” L

Optional Honda Power Pack Available Chute Canada• Clean Out Many Models •• Works with all&of our Double chain Hydrau Please Call for Details • Clean Out Chute 50% or better. 475 hp Cummins Item ID Sam x702 • Removes DebrisDebris & Bark as large as 13694.

2 ¼” • Removes & Bark as large Made In as 2 ¼” • 4’ Diameter Barrel

1-888-995-1965

• Optional Honda Power Pack Available

Options toAvailable Choose Canada Diesel. 7500 Hours.

One• Honda owner.

94 Barko 275 -From!

Excellent value Optional Honda Power Pack FIREWOOD TUMBLER • Optional Power Pack Available • Works with allwith of all our Double chain Hydraulic Lift conveyors • Works of our Double chain Hydraulic Lift conveyors

• Sturdy HSS online Steel Welded visit us Well maintained. Item ID or 13294. with low at hours at 3,500. 5.9 • 4’ Diameter Barrel

www.bellsmachining.com • Clean Out Chute CUMMINS continuous grapple.

Sam x702

Item ID 13644. Sam x702

FIREWOOD TUMBLER • RemovesAvailable Debris & Bark as large as 2 ¼” Financing Ask About Our • Works of Sturdy our Double chain Hydraulic conveyors • HSSItem Steel Welded Firewood Processor - This is a 2004 Bandit Beast Model 4680 - with all Runs Great!.

ID 13740.Lift Sam Made In Please Call for Details • Optional Honda Power Pack Available • 4’ Diameter Please CallBlades for Details Dismanteling Canada Barrel homemade processor with a 10’ 3412 Caterpillar Diesel engineMade In x702

2010 Shop Built Wood Processor

chain and kicker that all runs off

in excellent condition. Runs great.

1-888-995-1965

1-888-995-1965 1-888-857-5153 or visit us online

FIREWOOD PROCESSORS

log deck. Has a hydraulic grapple,

Made with 850 HP. 5300 hrs. Mill inIn Canada

Canada

or visitJust usfinished online good condition.

10

www.bellsmachining.com

• Clean Out Chute MadeDebris In • Removes & Bark as large as 2 ¼ CanadaBELL • Works with all of our Double chain Hyd 1990 Bell Super T - This Bell hasAvailable • Optional Honda Power Pack

‘90 Bell Super T

for Details - It has a 353 Detroit diesel, 40 Acre clearingPlease job,Call ready to work! a brand Duetz engine. Lever of a 4 cylinder Mercedes power Item ID:new 13896 Please Call for Details Financing Available Contact: Sam ck tooth circle saw, 30 foot e 1-888-995-1965 h inch insert Remote control.

Big production control, 33” bar, pump and tranny unit.

Has a 4’ chain saw that kicks Made In C ut Our Quality • Our Service • Our Price O Please Call fororDetails Ph: (888) 401-6367 x702 visit us onlineCall for Canada Please Details or visit us online ‘89 Timberjack 380A www.bellsmachining.com  Issue 364 ❘ 403 Lumbermens™  since 1986  List  seLL  exchange  buy  save ❘  LumbermensCO.com Financing Available www.bellsmachining.com Item ID: 14039 or visit us onlineFinancing Available John Deere Dual Arch Grapple, or visit us online

www.bellsmachining.com 1-888-995-1965 Financing Available 1-888-995-1965

1-888-995-1965

Contact: Austin

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

UNIVERSAL REFINER Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

C

O

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

R

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

P

O

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

feed deck 20 foot out feed deck

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

REscanaba,AMichigan T

I

MID-ATLANTIC

LOGGING & BIOMASS EXPO

that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

The H.A.W.G. unbelievably simple, durable EQUIPMENTis REPS Sam Wall and fast, yet it will grind almost anything and (888) 401-6367 ext. 702 make sam@lumbermens.co a finished product in just one pass...

Austin WoodsIs ideal for grinding: Asphalt, even pulp chips.

(888) 401-6367 ext. 703 Shingles, Construction Waste, Green Waste, austin@lumbermens.co Stumps, Diffi cult/Dirty Material, Tropical MAILING ADDRESS B & B Mfg. ............................... 18 P.O. Box 1916 Waste (Palm & Palmetto), etc.

Columbia, TN 38402-1916

N

bells and whistles, its a production machine, with air strain conveyers

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

O

with 44 inch wheels, and all the

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

ADVERTISING SALES

10 hours on this machine since it has been rebuilt, it has a 24foot in

works,1 1/2" or 2" band, 22ft. track

The R-MAG wood waste grinder Cat 3406 140KW Genset, 12,400 Cambridge, Ohio is a portable www.ohioforest.org hours ready to run.

ID 13434. that can be used in many areas ofItem recycling.

Sam grind x702 They can easily and safely lawn clippings, CARRIAGES & DRIVES on leaves, land clearing, construction/demoliti 2010 Cardinal HD Carriage waste logging slash, stumps, log yard waste, Carriages (Sawmill) - Cardinal railroad ties, storm waste, tropical (palm and Carriage line it includes carriage M&F Gauge ............................. 28 palmetto) waste etc. with onboard log turners, carriage

** INFO LINK**

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

drive, hyd pac for carriage,

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Kilgore Saw ............................. 22

Universal Refiner ................... 23

800-277-8068 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Corley Mfg .............................. 32

48" bottom saw and 36" top saw

STACKING RAC REFINER

Multitek ................................... 12

UNIVERSAL

Hahn Machinery ...................... 3 The Paul Bunyan Show ......... 39 The BEST Industrial Grinders/Shredders Hurst Boiler ............................. 14 Thomas Industrial Controls..... 10 on the Planet for over 35 years.

Iron Bull ................................... 21 Union Grove Saw & Knife.. 2, 37

P . O . B O X 1 Lignomat 5 1 ................................. � M O 24NWoodMizer T E S................................

A N O ,l Wwww.BakerProducts.net A 98563 800.S48.6914 I S73.663.7711 - USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

❘

 (888) 401-MENS L!

NO. 21

Phone: (888) 237-4195 ► Fax: (515) 598-7293 ► Email: adcopy@treetrader.com Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

SAFETY ALERT

Falling Tree Injures Two Loggers “Precision Under Pressure”

BACKGROUND On a partly cloudy fall morning in the south-central U.S., two workers were topping trees on a logging job and had just moved to a new section of the tract. They positioned themselves on the edge of the woods, right off the logging road, to take a short work break while waiting for the feller-buncher to finish and depart the area. Their backs were facing the feller-buncher.

PERSONAL CHARACTERISTICS Both employees had at least six months of industry experience at the time of the accident.

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

UNSAFE ACTS AND CONDITIONS The workers entered an area that was

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703 off onto a conveyor. This is a very Sam x702

Firewood Processor - This is

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 NEW Auto Saw Tensioner

with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’

Item ID: JW-986495 30+ Years Contact: J Williams Strong!

Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin From x703 Price To Performance, Best Value Portable Log Splitter We’re inA PA Cord - Small manufacturer has Above Rest! made the best valuedThe log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses  Firewood Processors: 8 Models  Firewood Cleaners 13HP Honda motor. Manual start  Firewood Conveyors: 12’, 20’ & 30’  Operator’s Cabs vans and produce 6 - 8 loads per but electronic option is available.  Firewood & Log Grapples  Free day. Item ID 13882.

Austin x703 Has Log Lift.

Uses DVD 4-way wedge

1999 Bandit 1900 Tracked Disc

Brewco Saws - Two Brewco Saws

Sam x702

drum design. Can easily load 42’

EDGERS & GANGS

in excellent condition. Runs great.

Item ID 13644. Sam x702

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

Portable • DePenDablelog• deck. low Has Maintenance FIREWOOD PROCESSORS a hydraulic grapple, chain and kicker that all runs off 888-SPLITTER (888-775-4883)

2010 Shop Built Wood Processor

- It has a 353 Detroit diesel, 40• 2756 Kentucky of a 4 cylinder 319-986-5525 Local Ave, MtMercedes Pleasant, power IA

blockbuster-inc.com

inch insert tooth circle saw, 30 foot

unit. Has a 4’ chain saw that kicks

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer

well built processor. Item ID 13820.

‘05 Gehl CTL 70

‘93 Barko 180B

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

a brand new Duetz engine. Lever

 Lumbermens™  since 1986 ~ ❘The  403WWW.TREETRADER.COM List  Largest seLL  exchange  The buy  save ❘  Industry LumbermensCO.com 100Issue 364 World’s Website For Tree & Landscape

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS SAFETY ALERT See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS too close to tree felling activity and wereFri,positioned with20their facing ofanalloperating 18 August - Sun, Augustbacks Location equipment at Boonville, New York www.LumberMB\ISmagazine.com machine. www.starwebhosting.net/woodsmen/

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO ACCIDENT Danckaert Band Resaw - Roughly Fri, 25 August - Sat, 26 August Tree TheThe feller-buncher operator unknowingly backed anArkansas oak tree, causing10ithours to uproot and fall on this machine sincein it Hotover Springs, that Started www.arkloggers.com has been rebuilt, it hasthem a 24footto in the direction of the two workers. The canopy of the falling tree hit both workers, knocking it All! feed deck foot out feed deck the ground. After turning the machine around, the feller-buncher the20workers trying 72ND ANNUAL GREAToperator LAKES noticed with 44 inch wheels, and all the Since 1986, Lumbermens has LOGGING & HEAVY EQUIPMENT EXPO to climb out from under the downed tree. published a monthly circular Thurs, 7 Sept - Sat, 9 Sept

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers

Lexington, Kentucky

Item ID 13876. Austin x703

INJURY that go up and down, with airbags, MID-ATLANTIC LOGGING & BIOMASS The two workers sustained multiple contusions and fractures.

One suff ered a puncture to it includes two setswound of Mcdonough Fri, 15 Sept - Sat, 16 Sept PUBLISHER pressure guides.

Top Casting wheel his abdomen, and the other suffered an injured spleen.

TheNorth crewCarolina foreman called 911, and an ambulance Selma, Woods Publishing www.midatlantic-logging-biomass­ is supported on both sides. This wasADVERTISING able to drive down the MID-ATLANTIC logging road directly to the expo.com/ accident scene. EMS personnel evaluated the SALES is an extremely accurate machine Morris Woods extent of their injuries and decided to airlift both workers to a regional medical center for further in ve1y good condition, Cuts 130 (888) 401-6367 ext. 704 KENTUCKY WOOD EXPO evaluation and treatment. morris@lumbermens.co feet a minute also has CLT presses.

Fri, 15 Sept - Sat, 16 Sept LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

LUMBERMEN’S

Digest John Williams http://www.kfia.org/ LUMBERMEN’S SEquipment & W 125 Band Mill with RECOMMENDATIONS FOR CORRECTION PO Box 1146 (888) 401-6367 ext. 701 KentuckyWoodExpo.aspx generator - Low hours Columbia,Caterpillar TN 38402-1146 j@lumbermens.co • Always maintain a Equipment safe distance from any tree felling activity.

1-800-477-7606 Fax (931) 388-3564 on the mill, electronic computer Set DESIGNposition DIRECTOR yourselfDigest THE PAUL BUNYAN SHOW www.lumbermenonline.com • Always facing operating equipment.

Donna Heninger works,1 1/2" or 2" band, 22ft. track Fri, 6 Oct - Sun, 8 Oct • Crew members should maintain constant communication toOhio ensure they know the140KW location coCat 3406 Genset,of 12,400 Cambridge, EQUIPMENT REPS Sam at Wall www.ohioforest.org workers all times. hours ready to run. Item ID 13434.

(888) 401-6367 ext. 702 sam@lumbermens.co

Sam x702

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

2010 Cardinal HD Carriage

** Them INFO LINK** PROTECT ALL ® With Pro-Tec-To Wrap

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

CARRIAGES & DRIVES

Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls,

Hydraulic Lines – Fuel.....................

Hoses27– Metal Air Lines Detector's Inc. .............. 30 Bell's Machining BruteBundles Force Mfg. .....................

31 Midwest Sharpening.............. 26 Electric Wire – Control Cables POSTMASTER

May be sent to­ morris@lumbermens.co

cabinet with electronic drives for carriage knees, husk including 48" bottom saw and 36" top saw

Buck Equipment (AIM) ........ 36 Morbark ..................................... 9 Send address changes to: Lumberman's Exchange Corley Mfg .............................. 32 Multitek ................................... 12 P.O. Box 1916 PRO-TEC-TO® WRAP & PRO-TEC-TO® SLEEVE Columbia, TN 38402 CRD Metalworks .................... 25 Piper's Saw Shop.................... 13

STACKING RAC

CUT YOUR DOWNTIME AND YOUR COSTS!

The Lumberman's Exchange is CW Mill-ArmorHog .............. 17 Rotochopper............................ 40 Protection published monthly

by Woods Against Pinching, Crushing, Rubbing & Abrasion CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 Publishing, P.O. Box 1916, UV RAYS! Both – EVEN are Impervious to Oils and Solvents.

Columbia, TN 38402. All rights Dyna Products ........................ 35 Sawmill Exchange .................. 11 reserved. All editorial/ advertorial submissions are usedMaximum at the Provides Protection for Logging, For The Distributor Empire Hydraulics ................... 8 Select Sawmill ......................... 19 discretionConstruction of the publisher&and may Stationary Applications Like: Nearest You, Call be edited for purposes of clarity Great Lakes Mfg. .................... 34 Smith Sawmill ........................... 4 Debarker Buggies Pantograph Arms • Forklift Masts and space.• Although all efforts• have Hahn MachineryLoaders ...................... 3 The Paul Bunyan Show ......... 39 been made• Wheel to ensure accuracy of Loaders • Skidder Grapples • Knuckleboom or Visit content submitted by advertisers • Fellerbuncher Heads • Harvesting Heads • Stroke Hurst Boiler .............................

14 Thomas Industrial Controls..... 10 www.pro-tec-toproducts.com and writers, the Lumberman's Delimbers • Dozer Blades Exchange, its principles and Iron Bull ................................... 21 Union Grove Saw & Knife.. 2, 37 associates,Anywhere are not heldHoses liable for & Wires Are – Pro-Tec-To® Products OEM’s, Repair Facilities & errors or omissions.

Reproduction, Saw .............................

22 Distributor Universal Refiner ................... 23 Offers Maximum Protection, Kilgore Lower Costs, Reduced Inquires Welcome in whole or part, is prohibited with­ Downtime and Less Spills!

Lignomat ................................. 24 WoodMizer ................................ l out written consent. ©2017 Woods Publishing

800-355-1250

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 23

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

IN THE NEWS

SFPA Announces 2020 Sawmill Safety Awards Recipients “Precision Under Pressure”

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer Item ID: 13920

Contact: Austin ‘13 KMC 2500 Track Ph: (888) 401-6367 x703 Pictured (from left to right): Chuck Watkins, Vice President Skidder Four Southern Pine sawmills – all members of the of Capital and Technology, West Fraser Inc.; Vince Almond, Southern Forest Products Association (SFPA) – are Item ID: 14078 13428 Victory Ln. // POBrothers Box 124 Lumber Company; Eric President of Almond Contact: Austin of the 2020capacity!. recent recipients Sawmill Safety Award.

Item ID 13421.

Sam x702 Adams Center, NY 13606 Ph: (888) 401-6367 x703 Gee, Executive Director of the Southern Forest Products BARKO SFPA Lumber Manufacturer members are Association Craig Forbes, Director of Lumber Sales Barko 160B Electric considered for the award 1994 based on -information – Weyerhaeuser Company and Board Chairman of the off onto a conveyor.

This is a very knuckleboom, 30' boom, submitted regarding occupational injuries75hpand Southern Forest Products Association. well built processor. Item ID 13820.

Rotobec continuous illnesses.

Safety performancemotor, is judged by how each Sam x702 grapple, 5,000 original hours. mill’s safety record stacks up against facilities with Firewood Processor - This is (excellent condition.). Item ID comparable lumber output throughout the year. The a Chomper Model 16 PDA 13238. Chris x700 results 2020processor included reports from mills that ‘05 Gehl CTL 70 automaticefor firewood 1995 Barko 775 B43 Feller Buncher recorded nearly 14unit million employee hours.

Item ID: JW-986495 with John Deere power with - Pumps recently redone. 400 hrs Contact: J Williams Division I includes sawmills that produce 50 million low hours. Control panel includes on injection pump. always started Ph: (888) 401-6367 x701 tach, oilfeet pressure, water temp andII covers good. in good working 22in board or less; Division facilities that order. produce ‘83 John Deere amptogauges.

Cuts logs up to 16”. kohing head.III head works great.

51 150 million board feet; and Division includes mills 4850 One owner and more comes than with all Item 13185.

Samannually. x702 chain conveyer, 8 way splitter, on ‘14ID Hurdle 3-Hd that produce 150 million board feet Item ID: 14073 20,000lb goose neck trailer.

Item ID manuals and receipts.

Purchased 1999 Barko 160D new engine with Contact: Austin The four sawmills being Block honoredSawmill for outstanding 13916. Austin x703 new for $32,500. Item ID 13865. approximately 1500 hours. Hour Ph: (888) 401-6367 x703 Item ID: 13997 safety records during 2020 are: Sam x702 Best Value Portable Log Splitter meter dont work.

The last 2 owners Contact: Austin 2006 CATI517 Division - Almond Brothers Lumber Company with 1700 hours, in very good - Small manufacturer in PA has LOGGING EQUIPMENT have only used it to load trucks or Ph: (888) 401-6367 x703 Item ID: 13869 condition. Easily produces high made the best valued log splitter.

BANDIT as a backup as needed.

Has a CTR – Coushatta, Louisiana Contact: Sam quality chips with patented ‘Cone’ Handles logs up to 32”. Uses 1999 Bandit 1900 grapple been rebuilt.

Division II Tracked - WestDisc Fraser Inc.delimber, – Mansfi eld,has Arkansas Ph: (888) 401-6367 x702 drum design. Can easily load 42’ 13HP Honda motor. Manual start Chipper Cat Under Carriage at Boom cylinders have minor leaks.

Division III - Weyerhaeuser Company – Millport, vans and produce 6 - 8 loads per but electronic option is available.

50% or better. 475 hp Cummins Item ID 13694. Sam x702 Alabama & West Fraser Inc. – Opelika, Alabama day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge Diesel. 7500 Hours. One owner.

94 Barko 275 - Excellent value “Safety is important in alllowbusiness, and5.9the EDGERS & GANGS adjustable to single two way. Great Well maintained. Item ID 13294. with at hours at 3,500. said SFPA Executive Brewco Saws - Two Brewco Saws Value! PA. Item ID 12062. Sam x702 sawmill Sam x702 business is no different,” CUMMINS continuous grapple. in excellent condition. Runs great.

Firewood Processor - This is a 2004 Bandit Beast Great!.

Itemthese ID 13740.

Sam Director EricModel Gee.4680 “We areRuns proud that SFPA Item ID 13644. Sam x702 homemade processor with a 10’ 3412 Caterpillar Diesel engine x702 member mills and commend them for striving to FIREWOOD PROCESSORS log deck. Has a hydraulic grapple, with 850their HP. 5300 hrs. Mill in a safe environment,” BELL he added. make workplace Firewood Proc.

2010 Shop Built Wood Processor chain and kicker that all runs off good condition. Just finished 10 1990 Bell Super T - This Bell has The awards were presented at the Item ID:in-person 13865 - It has a 353 Detroit diesel, 40 Acre clearing job, ready to work! a brand new Duetz engine. Lever of a 4 cylinder Mercedes power Contact: Sam Forest Products Machinery & Equipment Exposition inch insert tooth circle saw, 30 foot Remote control. Big production control, 33”401-6367 bar, pumpx702 and tranny unit. Has a 4’ chain saw that kicks Ph: (888) on August 12, 2021, in Atlanta, Georgia.

‘14 Komatsu WA200  Issue 364 ❘ 403 Lumbermens™  since 1986  List  seLL  exchange  buy  save ❘  LumbermensCO.com Loader boom loader, 3 knife disc, Newer

** CALENDAR** 2 DAY PUBLIC ONLINE AUCTION

FOR CLASSIFIEDS Call 888.401.MENS DAY 1: See|pictures, prices, NY STATE WOODSMEN'S FIELD DAYS Start Date: 9AM September 15 and Fri, 18 August - Sun, 20 August Location of all equipment at End Date: 9AM | September 22 PRODUCTS Boonville, New York Preview: 8AM to 4PM | September 21 www.LumberMB\ISmagazine.com

RUSHMORE FOREST www.starwebhosting.net/woodsmen/ DAY 2: Complete Sawmill BANDMILLS & HEADSAWS SOUTHWEST FOREST PRODUCTS EXPO Start Date: 9AM | September 16 Danckaert Band Resaw23 - Roughly 23848 Hwy 385, Hill City, SD End Date: 9AM | September Fri, 25 57745 August - Sat, 26 August The Tree

Preview: 8AM to 4PM on | September 22 it 10 hours this machine since Hot Springs, Arkansas FOR MORE INFO GO TO MURPHYAUCTION.COM that Started

www.arkloggers.com

it All!

has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

it includes two sets of Mcdonough

pressure guides. Top Casting wheel Selma, North Carolina www.midatlantic-logging-biomass­ is supported on both sides. This MID-ATLANTIC ADVERTISING SALES LOGGING & BIOMASS EXPO 2017 JOHN DEERE 844K-III 2010 JOHN DEERE expo.com/ 772GP 2004 JOHN DEERE 850C accurate SERIESmachine II is an extremely Woods Publishing

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR

Donna Heninger

EQUIPMENT REPS

Sam Wall 2017 401-6367 ROTOBEC EVOLUTION 960-SMW (888) ext.

702 sam@lumbermens.co

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org LSI PEERLESS

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

May be sent to­ Bell's Machining ..................... 27 Metal Detector's Inc. .............. 30 morris@lumbermens.co 2005 NORTHERN MILL TECH CM&E 36

POSTMASTER

Caterpillar generator - Low hours

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

LINDEN

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

AD SUBMISSIONS

Item ID 13876. Austin x703 S & W 125 Band Mill with

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

MAILING ADDRESS

in ve1y good condition, Cuts 130

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for

ARMSTRONG #5husk including carriage knees,

48" bottom saw and 36" top saw

STACKING RAC

The Lumberman's Exchange is CW Mill-ArmorHog .............. 17 Rotochopper............................ 40 published monthly by Woods CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 Publishing, P.O. Box 1916, Columbia, TN 38402. All rights Dyna Products ........................ 35 Sawmill Exchange .................. 11 reserved. All editorial/ advertorial submissions are used at the Empire Hydraulics ................... 8 Select Sawmill ......................... 19 discretion the publisher MOORE/WELLONS and may (3) of IRVINGTON LARGE ASSORTMENT OF ELECTRICS CHAIN & BELT CONVEYORS be edited for purposes of clarity Great Lakes Mfg. .................... 34 Smith Sawmill ........................... 4 and space. Although all efforts have TRIMMER ...................... 3 •The FILING GRINDING ROOM AUCTION TO INCLUDE: Paul&Bunyan Show ......... 39 • HUGE WIRE & CONDUIT LOT Hahn •Machinery been made to ensure accuracy of • SORTER • CHIP BINS • ROLLING STOCK • PEDESTAL MOUNT LOG LOADER content submitted by advertisers Hurst•Boiler ............................. 14 •Thomas STACKER KILNS Industrial Controls..... 10 • STEPthe FEEDER and writers, Lumberman's James G. Murphy Co • CHIPPERS • BOILER • WHOLE LOG METAL Exchange, its principles and DETECTOR Iron Bull ................................... 21 Union Grove Saw & Knife.. 2, 37 Murphyauction.com • VIBRATORY CONVEYORS • MOTOR INVENTORY • QUAD W/SHARP associates, areBAND not held liable for CHAIN 425.486.1246 errors• EDGERS or omissions. Reproduction, • CHIP MILL STORES Kilgore Saw SCREEN ............................. 22 •Universal Refiner ................... 23 in whole or part, is prohibited with­ www.BakerProducts.net Lignomat ................................. 24 WoodMizer ................................ l out written consent.

800.S48.6914 I S73.663.7711 ©2017 Woods Publishing

No Minimums - No Reserves - Murphyauction.com - 425.486.1246

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

❘

 (888) 401-MENS L!

NO. 25

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email “Precision Under Pressure” info@empirehyd.com Exceptionally hot and dry weather this

Wildfires Ravage Western U.S.

IN THE NEWS

summer has fueled dozens of wildfires across the western U.S., sending smoke across the country and threatening to register yet another record breaking year of forest fires.

‘93them.

Barko Drought and extreme heat are fueling massive forest fires in the West and making it tough to fight As of 180B late July, the ‘16burned Halverson two largest wildfires — one in California, the other in Oregon — have forests theH140 size of NewItem York ID: City, Los Angeles, and 14077 Contact: Austin Chicago combined.

Skidsteer (DEMO) (888) 401-6367 x703than The Dixie Fire in California had scorched 240,795 acres. It threatened more than 10,000 structuresPh: in the region with more Item ID: JW-909632 60 already destroyed. More than 7,800 residents across Butte and Plumas counties were ordered to evacuate.

Contact: J Williams The Bootleg Fire — the nation’s largest wildfire — was still raging in southern Oregon, Ph: (888) 401-6367 x701 burning 413,562 acres since igniting.

The fire has destroyed more than 400 structures and at least 342 vehicles.

The extremely hot weather was only making the fight harder as the region has experienced spells of triple digit heat. Nearly half of California is suffering exceptional drought.

With 83 wildfires burning in the U.S., President Joe Biden and Vice President Ka mala Harris met with a group of Democratic and Republican governors whose states are struggling to fight the raging flames.

“We can’t ignore how the overlapping and intertwined factors— extreme heat, prolonged drought and supercharged wild-fire conditions— Johnmeeting.

Deere C6 are affecting the country. And so this is a challenge that demands our urgent, urgent action,” Biden said during‘95 the virtual “There’s no human intervention that can save these forests if we don’t stop climate change,” said Washington Gov. Jay Inslee.

Tree Farmer “All of us want more aerial assets, more bulldozers, more trained personnel, but it’s kind of like if there’s an arsonist at Item ID: 13920 loose, and we have to corral the arsonist. We have to go on the offense.”

Contact: Austin ‘13 KMC 2500 Track Ph: (888) 401-6367 x703 A team of scientists from leading research universities, conservation organizations and government laboratories across the West Skidder has produced a synthesis of the scientific literature that clearly lays out the established science and strength of evidence on climate change, wildfi re and forest management for seasonally dry forests. Item ID: 14078 13428 Victory Ln. // PO Box 124 Contact: Austin capacity!. Itemthe ID best 13421.

Sam x702 The goal Center, is to give managers and others across the West access to a unified resource that summarizes available Adams NY land 13606 Ph: (888) 401-6367 x703 BARKO science so they can make decisions about how to manage their landscapes.

“Based on our extensive review of the literature and the weight of the evidence, the science of adaptive management is strong 1994 Barko 160B - Electric and justifies a range of time and research tested approaches to adapt forests to climate change and wildfi res,” said co-lead author off onto a conveyor. This is a very knuckleboom, 30' boom, 75hp Susan Prichard, a research scientist in the University of Washington’s School of Environmental and Forest Sciences. well built processor. Item ID 13820. motor, Rotobec continuous Sam x702

grapple, 5,000 original hours.

a Chomper Model 16 PDA

13238. Chris x700

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 403

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

Schutte Hammermill LOGGING EQUIPMENT Grinder BANDIT

13HP Honda motor. Manual start

Item ID: 13965 1999 Bandit 1900 Tracked Disc Contact: Austin Chipper - Cat Under Carriage Ph: (888) 401-6367 x703 at

Has Log Lift. Uses 4-way wedge

Diesel. 7500 Hours. One owner.

Handles logs up to 32”. Uses

but electronic option is available.

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

50% or better. 475 hp Cummins

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

good condition. Just finished 10

2013 Caterpillar Acre clearing job, ready to work!

535Ccontrol. Big production Remote

Item ID: 13868 Contact: Sam buy  save  List  seLL  exchange Ph: (888) 401-6367 x702

(excellent condition.). Item ID 1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in

‘01 Benson kohing head. head 34’ worksEnd great.

Item ID 13185. Sam x702 Dump

1999 Barko 160D - new engine with Item ID: 13818 approximately Contact: Sam1500 hours. Hour (888) meter401-6367 dont work.Ext. The 603 last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Mag 64-knive Runs Great!.

Item ID 13740. Sam Source Grinder x702 ID: 14007 Item Contact: Austin BELL Ph: 401-6367 x703 1990(888) Bell Super T - This Bell has

a brand new Duetz engine. Lever

control, 33”Has bar, new pump swing motor. jetand fit tranny

system. This machine is loaded... ❘  system LumbermensCO.com has pro-heat for cold weather start. Has fire suppression

19 44

Item Con Ph:

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS IN THE NEWS See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS These approaches include some thinning of dense forests in fire-excluded areas, prescribed burning, reducing fuels on the Fri, 18 August - Sun, 20 August Location of all equipment at ground, allowing some wildfires to burn in back country settingsBoonville, under favorable fuel and weather conditions, and revitalizing New York www.LumberMB\ISmagazine.com Indigenous fire stewardship practices. The findings were published Aug. 2 as an invited three-paper feature in the journal Ecological www.starwebhosting.net/woodsmen/

Applications.

BANDMILLS & HEADSAWS PRODUCTS “The substantial changes associated with more than aSOUTHWEST century of fireFOREST exclusion jeopardizeEXPO forest diversity and keystone processes Danckaert Band Resaw Roughly Fri, 25 August Sat, 26 August as well asThe numerous and quality of water, stability of carbon stores, air-quality, Tree other social and ecological values including quantity 10 hours on this machine since it Hot Springs, Arkansas and culturally important resources and food security,” said co-lead author and UW researcher Keala Hagmann. that Started www.arkloggers.com has been rebuilt, it has a 24foot in it All! feed deck 20 foot out feed deck 72ND ANNUAL GREAT LAKES is sharply producers just wood products prices slump and Canadian sawmills expand in theallU.S. with 44 inch wheels, and the Since British 1986, Columbia Lumbermens hasincreasing the cost of trees for lumberLOGGING & as HEAVY EQUIPMENT EXPO published a monthly circular Lumber producers will pay $76.22 per cubic meter of coniferous log -from province’s interior in the third quarter.

That Thurs,saw 7 Sept Sat,the 9 Sept bells and whistles, its a production reaching sawmills, loggers, Escanaba, Michigan is a 74 percent jump from this quarter and more than triple what they paid a year ago. machine, with air strain conveyers pallet makers, recyclers and Higher tree prices reduce the ability of lumber producers to compete against saw-mills in the U.S. Producers further that go up andcould down,be with airbags, industrial woodworking plants MID-ATLANTIC LOGGING & BIOMASS encouraged to shift operations south of the border. worldwide. it includes two sets of Mcdonough Fri, 15 Sept - Sat,shipments 16 Sept to the U.S. Canada is a top exporter of softwood lumber, with British Columbia leading PUBLISHER pressure guides. Top Casting wheel Selma, North Carolina The province’s rates were designed to provide stability against a volatile market, at a lag of two to three months.

Woods Publishing www.midatlantic-logging-biomass­ is supported on both sides. This MID-ATLANTIC The price increase follows a yearlong rally that vaulted U.S. lumber futures to a record high in May – more than quadrupling in ADVERTISING SALES expo.com/ LOGGING & BIOMASS EXPO 12 months – onWoods a home building and renovations boom that gave producers record quarterly revenues.is an extremely accurate machine Morris in ve1y good condition, Cuts 130 (888) 401-6367 ext. 704 “North American production growth is constrained by log availability in WOOD multipleEXPO regions, particularly British Columbia,” West KENTUCKY morris@lumbermens.co feet a minute also has CLT presses.

Fraser Timber Co. said in a statement.

Fri, 15 Sept - Sat, 16 Sept MARKETING DIRECTOR company is the world’s biggest lumber producer Item ID 13876.

AustinAmerican x703 Lexington, The Vancouver-based andKentucky has already shifted 48 percent of its North Williams http://www.kfia.org/ capacityJohn to the U.S. South.

S & W 125 Band Mill with (888) 401-6367 ext. 701 British Columbia-based Interfor Corp. recently said it will buy four U.S.KentuckyWoodExpo.aspx sawmill operations from Georgia-Pacific as part of its U.S.generator focused growth plan.

Caterpillar - Low hours j@lumbermens.co “Right now, log prices in B.C. are about triple what they are in the U.S. South; it’s literally like they’re operating in twoSet on the mill, electronic computer DESIGN DIRECTOR THE PAUL BUNYAN SHOW industries,” said Matt Fine, portfolio manager for Third Avenue Management in New York.

Donna Heninger works,1 1/2" or 2" band, 22ft. track Fri, 6 Oct - Sun, 8 Oct “It’s really tough in B.C. on a relative basis, which is why you’reCambridge, seeing virtually no investment in B.C.” Cat 3406 140KW Genset, 12,400 Ohio EQUIPMENT REPS While Sam muchWall of Canada’s harvestable timberlands are government-owned, south-ern yellow pine plantations in the U.S. are largely private. www.ohioforest.org

British Columbia Tree Costs Surge as Lumber Makers Move South

hours ready to run. Item ID 13434.

(888) 401-6367 ext. 702 sam@lumbermens.co

Sam x702

CARRIAGES & DRIVES ROW ELECTRICAL EQUIPMENT, INC.

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

YOUR SOURCE FOR USED, RECONDITIONED: Carriage line it includes carriage

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

2010 Cardinal HD Carriage

Carriages (Sawmill) - Cardinal

Cage Motors 18• B & •B Squirrel Mfg. ...............................

• Gear Motors • B. H.• Payne ..............................

Wound-Rotor Motors 16• • Synchronous Motors 5, 7• Baker ......................................

• DC Motors • Bell's Machining ..................... 27

DC Motors - Crane and Mill •28Transformers, Three-Phase M&F Gauge ............................. with onboard logStarters turners, carriage Adjustable Speed Drives • Across/Line Magnetic Meadows -Mill, Inc. DC ................•33Reduced Generators AC and Voltage Starters drive, hyd pac for carriage, Engine-Generator Switches Menominee SawSets .....................•29Safetysawyers cab, computer controls, Transformers, Single Phase • Phase Convertors cabinet with electronic drives for Metal Detector's Inc. .............. 30

carriage knees, husk including FaxBrute to:Force Mfg. ..................... 31 Midwest Sharpening..............

26 800-248-4479 WWW.RoWELECTRiCAL.CoM P.O. Box 2812 • Toledo, Ohio 43606

419-244-8887

POSTMASTER

48" bottom saw and 36" top saw

Buck Equipment (AIM) ........ 36 Morbark ..................................... 9 419-248-4479 Send address changes to: rowelec@glasscity.net sales@rowelectrical.com Lumberman's Exchange Corley MfgPHONE ..............................

32 Multitek ...................................

WE ANSWER THE 24 HOURS • WE BUY USED 12ELECTRICAL P.O. Box 1916 Columbia, TN 38402 CRD Metalworks .................... 25 Piper's Saw Shop.................... 13 The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may beBell edited for purposes of clarity Ultra T on and space. Although all efforts have Tracks been made to ensure accuracy of Itemsubmitted ID: 14023 content by advertisers Contact: Sam and writers, the Lumberman's Ph: (888) 401-6367 Exchange, its principles andx702 associates, are not held liable for errors or omissions. with winch, directReproduction, drive. Comes in whole or hour part, is prohibited with­ with 6000 extended warranty. out written consent.

Has only 2600 hours. Has new ©2017 Woods 30.5 X 32 26 ply on rearPublishing and 70%

CW Mill-ArmorHog .............. 17

BANDSAW

x702

secondary wood processing. Welded to your lengths!

Dyna Products ........................

35 sharpening Sawmill Exchange .................. 11 We also offer expert services, plus...

Gang • Edger • Scragg • TrimSawmill • Split • Strob Empire Hydraulics ...................

8 Select ......................... 19 ....and just about any Custom Saws you need

‘16 H140 to keep longer...

GreatHalverson Lakes Mfg. ....................

34you cutting Smith Sawmill ........................... 4 ‘05 CAT TK560 for less. Ask about FREE Shipping!

Skidsteer Item ID: 14004

Hahn Machinery ...................... 3 Item ID: JW-192810

The Paul Bunyan Show ......... 39

Hurst Boiler .............................

14 Ph: (888) 401-6367 x701

Contact: J Williams

Contact: Sam Ph: (888) 401-6367 x702 Thomas Industrial Controls ..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

does greatSaw job in hardwood. Priced Kilgore .............................

22

Skidder w/ESCO Boom 23 Universal RefinerSwing ...................

1977 (est) FMC 220CA Tracked

to sell!. Item ID 12206. Sam x702 Grapple - Good running condition.

Lignomat .................................

24 WoodMizer Call Marvin Miller for a quote ................................ l John Deere 20 hole Sweda wheels Front blade. Detroit 6V53 engine.

231-924-5953 (fax) 231-924-6166 / 11606 Brickyard Road • Holton, MI 49425 ©2019 Wood-Mizer LLC - These 50’s are mounted on hard No winch....they cannot fit with to find 20 hole John Deere sweda

- USED FORESTRY EQUIPMENT FOR SALE priced to sell. Item ID 13696. Sam

All Sizes Available!

CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 TOP PERFORMING, economical blades for all primary &

BLADES

on front. Still a new skidder and

STACKING RAC

Rotochopper............................ 40

❘

swing boom grapple. Military style  SELL YOUR EQUIPMENT  24/7 SUPPORT l§ TODAY ❘ 0

rims. Still 50% tread left on these tires. 4 available. Item ID 13852.

tracks at 70%. Item ID 13227. Sam x702

Sanborn Scragg Mill Item ID: 14050 Contact: Austin Woods (888) 401-6367 Ext. 606 13910. Austin x703

Franklin 170 Skidder - This would be a great starter skidder. It is

www.BakerProducts.net 800.S48.6914 I S73.663.7711

a single arch with winch. Runs

good and pulls good. Detroit 453 turbo and 3 speed power shift

❘

 (888) 401-MENS L!

NO. 27

transmission. Good center section.

There are a few leaks, but nothing

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

IN THE NEWS

Tigercat Introduces New Shovel Logger “Precision Under Pressure”

Tigercat has introduced the LSX870D shovel ‘93 Barko 180B logger. Based on the popular LX870D series track ‘16 Halverson H140 carrier platform, the machine is designed for extreme Item ID: 14077 Contact: Austin duty on steep slopes.

Skidsteer (DEMO) Ph: (888) 401-6367 x703 With the choice of attachments, including the new Item ID: JW-909632 Tigercat BG13 grapple with a live heel boom or the Contact: J Williams SC08 shovel clam grapple, the LSX870D is suited Ph: (888) 401-6367 x701 to pre-bunching and shovel logging in challenging terrain.

The addition of the LSX870D to the Tigercat lineup provides a higher power, closed loop drive alternative to the LS855E. Where the LS855E provides higher swing speed and lower ground pressure, the ‘95 John Deere C6 LSX870D allows for improved multi-functioning ability and quicker, more responsive travel speed.

Tree Farmer The Tigercat FPT C87 engine supplies 330 hp, which Item ID: 13920 — combined with the dedicated attachment pump — Contact: Austin ‘13 KMC 2500 Track Ph: (888) 401-6367 x703 provides plenty of multi-functioning power. Lift and Skidder reach capabilities for the LS855E and the LSX870D are identical.

Itemand ID:systems 14078 optimized for a wide range of steep slope Tigercat’s track use innovative technologies 13428 Victoryleveling Ln. // PO Box machines 124 Contact: Austin capacity!. Item ID 13421. x702 applications, super-duty leveling undercarriage is longer andSam wider, Adams including Center, NYshovel 13606logging, felling, and harvesting. Tigercat’s Ph: (888) 401-6367 x703 BARKO providing exceptional stability on steep slopes. The patented leveling design uses two massive hydraulic cylinders and heavy steel sections for a solution that is simple, robust and reliable. Unlike competing systems, the Tigercat leveling system leans into the hill 1994 Barko 160B - Electric when leveling to the side, which further improves machine stabilityoffand operator comfort. onto a conveyor. This is a very knuckleboom, 30' boom, 75hp For more information, visit www.tigercat.com or contact a Tigercat dealer. well built processor. Item ID 13820. motor, Rotobec continuous

SHRINK‘05WRAP Gehl CTL 70 FIREWOOD/WASTEWOOD Item ID: JW-986495

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter

- Small manufacturer in PA has Sell Your WOOD – $300/cord or More!

with 1700 hours, in very good

condition.

Easily produces Double or triplehigh your

madeby theshrink best valued log splitter. profits wrapping

quality chips with patented ‘Cone’ with Handles logs up to 32”. Uses wastewood - firewood WOOD-PAKER! drumAttractive design. Can easily loadsize 42’ various

13HP Honda Manual start packages canmotor. be obtained vans andwith produce 6 8 loads per but electronic option our high production, easily operatedis available. and day. Item ID 13882. x703 Eight Hasmachines Log Lift. Usesavailable.

4-way wedge affordableAustin machines.

EDGERS GANGS for producing adjustable tosquare single two way. Great The ideal &equipment bundles Brewco Saws - Two Brewco Sawsin storage Value! PA. Item ID 12062. Sam x702 palletizable for ease and transporting.

Inquire details. in excellent condition. Runs great.for free Firewood Processor - This is a Item ID Sam x702 • 3007 West homemade with a 10’ B &13644.

B Manufacturing River Road processor • Olean, NY 14760

FIREWOOD PROCESSORS

log deck. Has a hydraulic grapple,

716-373-5881

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

chain and kicker that all runs off of a 4 cylinder Mercedes power

E-mail: bbmfg@verizon.net • Web: www.thewoodpaker.com unit. Has a 4’ chain saw that kicks

inch insert tooth circle saw, 30 foot  Issue 364 403

Lumbermens™  since 1986

❘

Sam x702

grapple, 5,000 original hours.

a Chomper Model 16 PDA

13238. Chris x700

Firewood Processor - This is automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

(excellent condition.). Item ID 1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

‘05

Boom cylinders have minor leaks.

Item Con Ph:

delimber, grapple has been rebuilt.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

‘99 51

Item Con Ph:

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS IN THE NEWS CALENDAR OF EVENTS See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Pitts Enterprises Founder Passes Away Fri, 18 August - Sun, 20GREAT August LAKES Location EXPOof all equipment at Andrew Pitts Jr., the founder and former CEO of Pitts Boonville, New YorkSeptember 9-11, www.LumberMB\ISmagazine.com 2021

www.starwebhosting.net/woodsmen/ Enterprises in Alabama, died July 16. He was 90.

UP State Fairgrounds • Escanaba, MI Pitts Enterprises will continue as a family business with BANDMILLS & HEADSAWS SOUTHWEST FOREST PRODUCTS EXPO Andrew’s son Jeff Pitts, who has led the company as CEO since KY WOODDanckaert EXPO Band Resaw - Roughly Fri, 25 August - Sat, 26 August The Tree 2002. “My father never forgot his roots,” said Jeff. “He invested Hot Springs, September Lexington, KY since it on this machine Arkansas 17-18, 202110•hours that in people — Started from his family and friends to his employees and www.arkloggers.com has been rebuilt, it has a 24foot in MID-SOUTH FORESTRYfeed EQUIPMENT SHOW customers. He built this business on innovation, quality and value. it All! deck 20 foot out feed deck 72ND ANNUAL GREAT September LAKES He instilled those ideals in Pitts Enterprises, and they will live on.”

17-18, 2021 with 44 inch wheels, and all the Since 1986, Lumbermens has LOGGING & HEAVY EQUIPMENT EXPO “Andrew Pitts was a pioneer who moved the industry published a monthly circular Thurs, 7 Sept - Sat, PAUL 9 Sept BUNYAN bellsSHOW and whistles, its a production forwardsawmills, with hisloggers, innovations,” said J.P. Pierson, president of reaching Escanaba, Michigan machine, October 1-3, 2021 with air strain conveyers pallet and business unit. “He leaves behind a Pitts makers, Trailers,recyclers an affiliated that go up and down, with airbags, industrial woodworking strong legacy of hard plants work and belief in doing the rightMID-ATLANTIC thing LOGGING & BIOMASS worldwide.

84th OREGON LOGGING CONFERENCE it includes two sets of Mcdonough that will impact his family, his hometown, his company and theFri, 15 Sept - Sat, 16 Sept PUBLISHER February 24-26, 2022 • Eugene, OR pressure guides.

Top Casting wheel overall industry for decades to come.”

Selma, North Carolina Woods Publishing Pitts grew up in Pittsview, Alabama, and attended Auburn www.midatlantic-logging-biomass­ is supported on both sides. This MID-ATLANTIC ADVERTISING SALES in his family’s expo.com/ LOGGING businesses & BIOMASS EXPO University.

He worked for several is an extremely accurate machine Morris Woods years before building his first logging trailer in 1976. From in ve1y good condition, Cuts 130 (888) 401-6367 ext. 704 Every Wide Band KENTUCKY WOODReputable EXPO themorris@lumbermens.co success of that first trailer, Pitts went on to build what has feet a minute also has CLT presses.

Fri, 15 Sept - Sat, 16 Sept Supplier Offers become the world’s largest and only complete line forestry Lexington, MARKETING DIRECTOR Item ID 13876. Austin x703 Kentucky 3 High Quality Swedish Steel manufacturing company, headquartered in his hometown.

John Williams http://www.kfia.org/ S & W 125 Band Mill with (888) ext. community 701 Pitts401-6367 served his as a member of the UnitedKentuckyWoodExpo.aspx 3 3” – 8” Band Width Caterpillar generator - Low hours j@lumbermens.co Methodist Church, chairman of the Republican party of Russel County 3 16 to 20 Gage on the mill, electronic computer Set and a DESIGN foundingDIRECTOR member of the Pittsview Civic Society. He enjoyedTHE PAUL BUNYAN SHOW 3 Double Cut Options Donna works,1 1/2" or 2" band, 22ft. track rooting forBrewco theHeninger Auburn Tigers and playing golf in his free time. Fri, 6 Oct - Sun, 8 Oct ‘06 B1600 3 Choice Stellite 3406 140KW Genset, 12,400 Cambridge, Ohio of Swage or Cat EQUIPMENT REPS Pitts is survived by his wife, Jean, his three children and Resaw Sam Wall www.ohioforest.org hours ready to run. Item ID 13434. seven grandchildren.

(888) 401-6367 ext. 702 Item ID: 13862 sam@lumbermens.co

Contact: Sam Ph:Austin (888) Woods 401-6367 x702

(888) 401-6367 ext. 703 austin@lumbermens.co

** INFO LINK**

‘05 Woodmizer LT300

MAILING ADDRESS

Item ID: 14031 Contact: Austin Ph: (888)..............................

401-6367 x703 16 B. H. Payne

AD SUBMISSIONS

Baker ...................................... 5, 7

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367 May be sent to­ morris@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange Item ID: 14042 P.O. Box 1916 Contact: Austin Columbia, TN 38402

John Deere 548G2 Ph: (888) 401-6367 x703

The Lumberman's Exchange is published monthly by Woods - 3410P.O. hours.

Publishing, Box$32,000 1916, in recent Columbia, TN 38402.

All rights upgrades and repairs.

Fecon reserved. All editorial/ advertorial BH250are Mulching Head. Item ID submissions used at the discretion of the 13502.

Sampublisher x702 and may be edited for purposes of clarity 2011Although Tigercat 620D - Thishave is a and space. all efforts been made to ensure accuracy of 5500 low hour skidder with only content submitted by advertisers hours the on aLumberman's cummins engine and and writers, Exchange, principles and a fireitssuppression system. Comes associates, are not held liable for mounted on 35.5 tires at 50% back errors or omissions. Reproduction, in whole part,front is prohibited andor40% and goodwith­ chains on out written consent. all 4 tires. Has the bigger 630 axles ©2017 Woods Publishing

B & B Mfg. ............................... 18

Bell's Machining ..................... 27 Brute Force Mfg. ..................... 31 Buck Equipment (AIM) ........ 36 Corley Mfg .............................. 32 CRD Metalworks .................... 25

‘14 B66TD Rotochopper CW Mill-Hogzilla ................... 15

WOLVERINE

BUT ONLY THE Sam x702 CARRIAGES & DRIVES

BY MENOMINEE SAW GUARANTEES

Midwest Sharpening.............. 26

48" bottom and 36" top saw Gives You saw Everything You need in a Wide Band Saw – Plus Multitek ...................................

12 Expert Service from the Industry’s Most Piper's Saw Shop.................... 13 Knowledgeable Staff.

And ONLY Menominee Morbark .....................................

9

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

Item ID: 13838 Contact: Sam Empire (888)Hydraulics 401-6367 ...................

Ext. 603 8

Select Sawmill ......................... 19

Dyna Products ........................ 35

Problem?

Call Menominee Saw Today and You’ll Sawmill Exchange .................. 11 Learn Why More Mills Trust the Pro!

TOLL FREE 1-800-582-0470 Thomas Industrial Controls..... 10

Smith Sawmill ........................... 4

Hahn ......................

3 ItemMachinery ID 13408. Sam x702

The Paul Bunyan Show ......... 39

900&16th Menominee, MI 49858 Skidder - Dual Arch Grapple. Just Iron Bull ...................................

21 Union Grove Saw KnifeSt., .. 2, 37 Tel: 906-863-2609 Fax: 906-863-1147 1990 hours. 3 year/5000 hour PT Kilgore Saw ............................. 22 Universal Refiner ................... 23 Email: info@menomineesaw.com warranty. 35.5 tires with dualing www.BakerProducts.net Lignomat ................................. 24 WoodMizer ................................ l rings at 60%. Wide blade. Winch.

800.S48.6914 I S73.663.7711

WWW.MENOMINEESAW.COM

and no winch. Center pins are tight Item ID 13526. Sam x702 FORESTRY FOR SALE2015❘ Tigercat  SELL EQUIPMENT ❘ the0 grapple 24/7 SUPPORT - USED EQUIPMENT l§ TODAY on roatation w/ a 234BYOUR Loader - Model and extra fuel tank.

Item ID 13929.

Sam x702

STACKING RAC

Got a Wide Row Electric ............................

20 Band

Great Lakes Mfg. .................... 34 Hurst .............................

2014Boiler Tigercat 630D Grapple 14

2010 Cardinal HD Carriage

• Cutting Edge Plasma Welds Carriages (Sawmill) - Cardinal • The Industry’s Highest Carriage Band Saw line itCapacity includes carriage M&F Gauge ............................. 28 with onboard log turners, carriage • Quick Delivery from our HUGE Inventory Meadows Mill, Inc. ................ 33 drive, hyd pac for carriage, • Fast Sharpening & Exchange Program Menominee Saw ..................... 29 sawyers cab, computer controls, to Keep YOU Running cabinet with electronic drives for Metal Detector's Inc. .............. 30 • Competitive Pricing carriage knees, husk including

234B. Only 300 hours on this

30’ reach on the boom. Joystick

❘2006 Tigercat L! (888) 401-MENS 630C Grapple NO. 29 Skidder - Very good running

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer 96’ Cat 312 Buncher Item ID: 100088

10’ Cord King Firewood Processor Item ID: 100081

Contact: AUSTIN Contact: AUSTIN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXTPO 703 13428 Victory Ln. // Box 124Phone: 888-401-6367 EXT 703 931-797-8029 931-797-8029

Adams Center, NY 13606

Franklin Forwarder ‘13 KMC132 2500 Track Item ID: 100093 Skidder

Contact: AUSTIN Email: Item Austin@lumbermensco.com ID: 14078 Phone: 888-401-6367 EXT 703 Contact: Austin 931-797-8029

Ph: (888) 401-6367 x703

off onto a conveyor. This is a very

well built processor. Item ID 13820.

B U Y S

Sam x702

Tigercat 250 w/Grapple Saw Item ID: 100058

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

H O T

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

Timberjack 460

with 1700 Item hours,ID: in 100049 very good

Contact:Easily AUSTIN condition. produces high Email: Austin@lumbermensco.com quality chips with patented Phone: 888-401-6367 EXT‘Cone’ 703 OR 931-797-8029 drum design. Can easily load 42’

vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FORD PICKER TRUCK FIREWOOD PROCESSORS Item ID: 100027

2010 Shop Built Wood Processor Contact: AUSTIN - ItEmail: has a Austin@lumbermensco.com 353 Detroit diesel, 40 Phone: 888-401-6367 EXT 703 inch insert931-797-8029 tooth circle saw, 30 foot  Issue 364 403

Firewood Processor - This is

84’ John Deere 540B

‘05 Gehl CTL 70 Contact: AUSTIN

Email:ID: Austin@lumbermensco.com Item JW-986495 Phone: 888-401-6367 EXT 703 Contact: J Williams 931-797-8029 Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter

97’ Timberjack 240C

- Small manufacturer in PA has Item ID: 100076

2006 John Deere 648G III

a Chomper Model 16 PDA Item ID: 100077

automatice firewood processor

Item ID: 13920 Contact: Austin 2014 John Deere 640H Item401-6367 ID: 100091x703 Ph: (888)

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029 capacity!.

Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID

84’ John Deere 440C

13238. Chris Itemx700 ID: 100074

801-362-2170 low hours. OR Control panel includes

1995 Barko 775 B Feller Buncher Contact: AUSTIN Email: Austin@lumbermensco.com -Phone: Pumps recently redone. 400 hrs 888-401-6367 EXT 703 931-797-8029 on injection pump. always started

amp gauges. Cuts logs up to 16”.

kohing head. head works great.

Contact: JOE

Email:John Joe@lumbermensco.com with Deere power unit with Phone: 888-401-6367 EXT 709

tach, oil pressure, water temp and One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam ‘02 x702 Jackson Shavings Mill Item ID: 13736 LOGGING EQUIPMENT

good. in good working order. 22in Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners

2006 John Deere 848H

have only used to load trucks or Item ID:it 100069

made the best valued log splitter.

Contact: AUSTIN Email: Austin@lumbermensco.com Handles logs up to 32”. Uses Phone: 888-401-6367 EXT 703 931-797-8029 13HP Honda motor. Manual start

Contact: AUSTIN BANDIT Email: Austin@lumbermensco.com 1999 Bandit 1900 Tracked Disc Phone: 888-401-6367 EXT 703 OR 931-797-8029 Chipper - Cat Under Carriage at

Contact: JOE Email: Joe@lumbermensco.com delimber, grapple has been rebuilt.

Phone: 888-401-6367 EXT 709 OR 801-362-2170 Boom cylinders have minor leaks.

Has Log Lift. Uses 4-way wedge

Diesel. 7500 Hours. One owner.

94 Barko 275 - Excellent value

but electronic option is available.

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

2006 John Deere 437C log deck. Has a hydraulic grapple, Item ID: 100078 chain and kicker that all runs off Contact: JOE

Joe@lumbermensco.com ofEmail: a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 709

unit. Has a OR 4’ chain saw that kicks 801-362-2170

Lumbermens™  since 1986

❘

50% or better. 475 hp Cummins

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar CatDiesel 515 engine Item ID: with 850 HP. 5300 100029 hrs. Mill in

good condition.

Just finished 10 Contact: AUSTIN Email: Austin@lumbermensco.com Acre clearing job, ready EXT to work!

Phone: 888-401-6367 703 OR 931-797-8029 Remote control.

Big production

 List  seLL  exchange  buy  save

as a backup as needed. Has a CTR

Item ID 13694. Sam x702

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702Timberjack 450C Item ID: 100026 BELL

1990 Bell Super T - This Bell has Contact: AUSTIN Email: Austin@lumbermensco.com aPhone: brand new Duetz engine.

Lever 888-401-6367 EXT 703 931-797-8029 control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM Call 888.401.MENS NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

John Deere 700H Forestry Dozer TheID: Tree Item 99930 that Started Contact: SAM it All! Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

JD 643GSALES ADVERTISING

Item ID: 80565 Morris Woods (888) 401-6367 ext. 704 Contact: JOE morris@lumbermens.co Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 MARKETING OR 801-362-2170 DIRECTOR

SOUTHWEST 13’ FOREST PRODUCTS EXPO 06’ John Deere 650J Prentice 2384B Fri, 25 AugustItem - Sat, August Item ID: 100025 ID: 26 100023

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Selma, North Carolina www.midatlantic-logging-biomass­ 16’ John Deere 640L John Deere 650H LGP MID-ATLANTIC Item ID: 10016 expo.com/ LOGGING & BIOMASS EXPO Forestry Dozer Item ID: 99810

Contact: AUSTIN

KENTUCKY WOOD EXPO Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Fri, 15 Sept Sat, 16 Sept

931-797-8029

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Send address to: PS8 POSTchanges PEELER Lumberman's Exchange Item ID: 100055 P.O. Box 1916 Contact: AUSTIN Columbia, TN 38402 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 The Exchange is Lumberman's 931-797-8029

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content 97’ submitted by advertisers Barko 160C and writers, the Lumberman's Item ID: 100054 Exchange, its principles and Contact:are AUSTIN associates, not held liable for Email: errors or Austin@lumbermensco.com omissions. Reproduction, Phone: 888-401-6367 EXT 703 in whole or931-797-8029 part, is prohibited with­ out written consent. ©2017 Woods Publishing

BANDMILLS & HEADSAWS 12’ Tigercat 234B

Danckaert Band Item ID: Resaw 100014- Roughly 10 hours on this machine since it Contact: AUSTIN Email: Austin@lumbermensco.com has been rebuilt, it has a 24foot in Phone: 888-401-6367 EXT 703 feed deck 931-797-8029 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides.

John Deere 750J This Item ID:accurate 100015 machine is an extremely Contact: AUSTIN in ve1y good condition, Cuts 130 Email: Austin@lumbermensco.com feet a minute also has CLT presses.

Phone: 888-401-6367 EXT 703

931-797-8029 Item ID 13876. Austin x703

S & W 125 Band Mill with Caterpillar generator - Low hours

L O G G I N G

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR

MAILING ADDRESS

Phone: 888-401-6367 EXT 703

931-797-8029 72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Sam Wall (888) 401-6367 ext. 702 16’ John Deere 648L sam@lumbermens.co Item ID: 100052 Austin Woods Contact: AUSTIN ext. 703 (888) 401-6367 Email: Austin@lumbermensco.com austin@lumbermens.co Phone: 888-401-6367 EXT 703

931-797-8029

Hot Springs, Arkansas Contact: AUSTIN www.arkloggers.com Email: Austin@lumbermensco.com

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

on the mill, electronic computer Set

works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434.

Sam x702

92’ Timberjack 240A Grapple

Timbco 425C

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029 B & B Mfg. ............................... 18

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029 M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck (AIM)648H ........ 36 08’ Equipment JOHN DEERE Item ID: 100051 Corley Mfg .............................. 32 Contact: AUSTIN CRD .................... 25 Email:Metalworks Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029.............. 17 CW Mill-ArmorHog

Morbark .....................................

TIGERCAT 610C 9 Item ID: 100046 Multitek ................................... 12 Contact: AUSTIN Piper's Saw Shop.................... 13 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Rotochopper ............................ 40

931-797-8029

2016 Tigercat 604 E Cable Skidder

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

** INFO LINK** Item ID: 100048

John Deere 548G 14 Hurst Boiler .............................

Item ID: 100050 Iron Bull ................................... 21 Contact: AUSTIN Email: Austin@lumbermensco.com Kilgore Saw .............................

Phone: 888-401-6367 EXT 703 22

931-797-8029 Lignomat ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Item ID: 100028

310E ..... 10 ThomasPrentice Industrial Controls Item ID: 100044 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Email: Austin@lumbermensco.com Universal Refiner ...................

Phone: 888-401-6367 EXT 70323

931-797-8029 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

Komatsu 931.1

CARRIAGES & DRIVES Item ID: 99949

2010 Cardinal HD Carriage Contact: AUSTIN Email: Austin@lumbermensco.com Carriages (Sawmill) - Cardinal Phone: 888-401-6367 EXT 703 Carriage931-797-8029 line it includes carriage

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw Item ID:55393

STACKING RAC

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

93’ Prentice 210 Item ID: 14216

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029 www.BakerProducts.net 800.S48.6914 I S73.663.7711

❘ L!  (888) 401-MENS 401-MENS

NO. 31

Phone

315.284.4126 PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM TO VIEW DESCRIPTION,

“Precision Under Pressure”

Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

07’ Tigercat 724E

John Deere 850K LGP

Item ID: 14218

Item ID: 99814

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Contact: Item ID:AUSTIN JW-909632 Email: Austin@lumbermensco.com Contact: J Williams EXT 703 Phone: 888-401-6367 931-797-8029 Ph: (888) 401-6367 x701

Husky Brute XL 235

2004 Timbco 445EXL

John Deere 540G2 Cable Skidder

Item ID: 100004

Item ID: 53891

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

L O G G I N G

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘16 Halverson 2011 John DeereH140 648H Item ID:(DEMO) 14217 Skidsteer

Item ID: 14170

‘13 KMC 2500 Track Skidder

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

12’ John Deere 437D

532 CAT Feller Buncher

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Item ID: 14209

‘83 John Deere 4850

Item ID: 14079

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

20,000lb goose neck trailer. Item ID 13916. Austin x703

16’ CAT 545D

10’ John Deere 648H

Item ID: 14211 with 1700 hours, in very good Contact: AUSTIN Email: Austin@lumbermensco.com condition.

Easily produces high Phone: 888-401-6367 EXT 703 931-797-8029 quality chips with patented ‘Cone’

Best ValueItem Portable Log Splitter ID: 14210

vans and produce 6 - 8 loads per

but electronic option is available.

drum design. Can easily load 42’ day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. x702 548G 2004 JohnSam Deere Item ID: 100068 FIREWOOD PROCESSORS

III

2010 Shop Built Contact: JOE Wood Processor Email: Joe@lumbermensco.com

- ItPhone: has a 353 Detroit diesel, 40 888-401-6367 EXT 709 OR 801-362-2170

inch insert tooth circle saw, 30 foot  Issue 364 403

- Contact: Small manufacturer AUSTIN in PA has Email: Austin@lumbermensco.com made the best valued log splitter.

Phone: 888-401-6367 EXT 703 931-797-8029 Handles logs up to 32”. Uses 13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

14’ John Deere 750K homemade processor with a 10’ Item ID: 10053 log deck. Has a hydraulic grapple, Contact: AUSTIN chain and kicker that all runs off Email: Austin@lumbermensco.com 888-401-6367 EXT 703 ofPhone: a 4 cylinder power OR Mercedes 931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

well built processor. Item ID 13820.

‘93 Barko 180B

Item ID: 14077 97’ JohnAustin Deere 548G2 Contact: Item ID: 99972 Ph: (888) 401-6367 x703

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

‘95 John Deere C6 John Deere 700K LGP Tree Farmer Dozer

Item ID: 13920 Item ID: 3674 Contact: Austin Contact: SAM Ph: Sam@lumbermensco.com (888) 401-6367 x703 Email: Phone: 888-401-6367 EXT 702

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Timbco 820D Sam x702 Item ID: 18370 Firewood Processor - This is AUSTIN aContact: Chomper Model 16 PDA Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 automatice firewood processor 931-797-8029 with John Deere power unit with

07’ 5,000 Tigercat grapple, original620C hours.

Item ID: 14248 (excellent condition.). Item ID Contact: AUSTIN 13238. Austin@lumbermensco.com Chris x700 Email: Phone: 888-401-6367 703 1995 Barko 775 B FellerEXT Buncher 931-797-8029 - Pumps recently redone. 400 hrs

tach, oil pressure, water temp and

good. in good working order. 22in

low hours. Control panel includes amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500.

Item ID 13865.

John Deere 437E

Sam x702 Knuckleboom Loader Item ID: 63181 LOGGING EQUIPMENT

on injection pump. always started kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

12’ John Deere 843K

meter dont work.

The last 2 owners Item ID: 14212

Contact: SAMBANDIT Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 1999 Bandit 1900 Tracked Disc

have onlyAUSTIN used it to load trucks or Contact: Email: Austin@lumbermensco.com as a backup as needed. Has a CTR Phone: 888-401-6367 EXT 703 931-797-8029 delimber, grapple has been rebuilt.

50% or better. 475 hp Cummins

Item ID 13694. Sam x702

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 -

3412 Diesel 548G3 engine 06’Caterpillar John Deere Item ID: 100066 with 850 HP. 5300 hrs. Mill in

Contact: AUSTIN good condition.

Just finished 10 Email: Austin@lumbermensco.com Acre clearing job, readyEXT to work!

Phone: 888-401-6367 703 931-797-8029 Remote control. Big production

 List  seLL  exchange  buy  save

Boom cylinders have minor leaks.

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702 2005

John Deere 643H

Item ID: 100072 BELL

1990 BellJOE Super T - This Bell has Contact: Email: Joe@lumbermensco.com a brand888-401-6367 new Duetz engine.

Phone: EXT 709Lever OR 801-362-2170

control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

Timberjack The Tree380 Item ID: 99926 that Started Contact: SAM it All! Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

Caterpillar ADVERTISING SALES Item ID: 2476

Morris Woods (888) 401-6367 ext. 704 Contact: SAM morris@lumbermens.co Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

MARKETING DIRECTOR

Item ID: 27398

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Send address changes to: ‘14 CAT 535C Lumberman's Exchange Item ID: 13840 P.O. Box 1916 Contact: SAM TN 38402 Columbia, Email: Sam@lumbermensco.com The Lumberman's Exchange is 702 Phone: 888-401-6367 EXT

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers Risley Rolly 2 and writers, the Lumberman's Item ID: 1993 Exchange, its principles and associates, are not held liable for Contact: SAM errors or omissions. Reproduction, Email: Sam@lumbermensco.com inPhone: whole or part, is prohibited 888-401-6367 EXTwith­ 702 out written consent. ©2017 Woods Publishing

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

feed deck 20 foot out feed deck

with 44 inch wheels, and all the

LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

it includes two sets of Mcdonough pressure guides. Top Casting wheel

Selma, North Carolina www.midatlantic-logging-biomass­ MID-ATLANTIC expo.com/ LOGGING & BIOMASS EXPO TC Skidder 2010 John Deere 648H Cat 518 Grapple Skidder Item ID: 57023

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

is supported on both sides. This

Tigercat 724E Feller Buncher

is an extremely accurate machine

Item ID: 74169

KENTUCKY WOOD EXPO Contact: SAM Fri, 15 Sept - Sat, 16 Sept Email: Sam@lumbermensco.com Lexington, Kentucky EXT 702 Phone: 888-401-6367 http://www.kfia.org/ KentuckyWoodExpo.aspx

in ve1y good Itemcondition, ID: 99815 Cuts 130 feet a minute also has CLT presses.

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Item ID 13876. Austin x703

S & W 125 Band Mill with Caterpillar generator - Low hours

on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

Donna Heninger

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

Grapple Skiddersince it 10 hours on this machine Item ID: 78104 has been rebuilt, it has a 24foot in

Contact: SAM Email: Sam@lumbermensco.com 72NDPhone: ANNUAL GREAT LAKES 888-401-6367 EXT 702

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

MAILING ADDRESS

Danckaert Resaw - Roughly John Band Deere 548G2

Hot Springs, ItemArkansas ID: 99931 www.arkloggers.com

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

DESIGN DIRECTOR Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co ‘11 Tigercat 620D Item ID: 13929 Austin Woods (888) ext. 703 Contact:401-6367 SAM austin@lumbermens.co Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 Timberjack 430August PARTS

Timbco 425B

Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434.

Cat 322CL Sam x702

Processor Logmax CARRIAGES7000XT & DRIVES

John Deere 3754D

** INFO LINK** Item ID: 99962

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Item ID: 45747

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

L O G G I N G

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Prentice 2384

Item ID: 78834 2010 Cardinal HD Carriage

Contact: SAM Email: Sam@lumbermensco.com Carriages (Sawmill) - Cardinal Phone: 888-401-6367 EXT 702

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) ........ 36 Bandit 1850 Track Chipper

Mor bark .....................................

Prentice 210E Loader9 Item ID: 79682 Multitek ................................... 12

Boom & Delimber

Contact: AUSTIN CRDAustin@lumbermensco.com Metalworks .................... 25 Email: Phone: 888-401-6367 EXT 703 OR 931-797-8029 CW Mill-ArmorHog .............. 17

Contact: AUSTIN Piper's Saw Shop.................... 13 Email: Austin@lumbermensco.com

Rotochopper 40 OR ............................

931-797-8029

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler 14 Feller.............................

Buncher

Thomas Industrial Controls ..... 10 Timbco 445EXL Hotsaw

Item ID: 99904 Corley Mfg ..............................

32

ID: 78672 Iron BullItem ...................................

21

Contact: KilgoreAUSTIN Saw ............................. 22 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 LignomatOR .................................

24 931-797-8029

- USED FORESTRY EQUIPMENT FOR SALE

❘

Phone: 888-401-6367 EXT 703

FellerSaw Buncher Union Grove & Knife.. 2, 37 Item ID: 47200 Universal Refiner ................... 23 Contact: SAM Email: Sam@lumbermensco.com WoodMizer ................................ l Phone: 888-401-6367 EXT 702

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" Prentice bottom saw andKnuckle 36" top saw 384

STACKING RAC Item ID: 49732

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

1998 John Deere 548G Grapple skidder Item ID: 99921

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 www.BakerProducts.net OR 931-797-3915

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 33

Phone

315.284.4126 PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM TO VIEW DESCRIPTION,

“Precision Under Pressure”

Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

2012 Tigercat 250C Item ID: 99966

'09 John Deere 753J Buncher Item ID: 14106

‘93 Barko 180B

Item 2015 ID: 14077 Cat 545D Contact: Austin Item ID: 45196 Ph: (888) 401-6367 x703

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Contact: Item ID:AUSTIN JW-909632 Email: Austin@lumbermensco.com Contact: J Williams EXT 703 Phone: 888-401-6367 931-797-8029 Ph: (888) 401-6367 x701

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

2012 John Deere 648H

Timberjack 240

2014 Tigercat 234B

‘95 John Deere C6 Timberjack 240 Tree Farmer Cable Skidder

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Contact: AUSTIN ‘13 KMC 2500 Track Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Skidder 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Price $45,000

L O G G I N G

08’ John Deere 437C

‘16 Halverson $46,500 H140 Item ID:(DEMO) 53095 Skidsteer

Item ID: 80318

Item ID: 29966

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

2017 Eco Log 688D Item ID: 99994

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

2016 Cat 563C

Item ID: 99970 with 1700 hours, in very good

Rhottne F-11 Item ID: 99976

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

2012 Cat D6K XL

Best ValueItem Portable Log Splitter ID: 14169

Phone: 888-401-6367 EXT 703 931-797-8029 quality chips with patented ‘Cone’

- Small manufacturer in PA has Contact: AUSTIN Email: Austin@lumbermensco.com made the best valued log splitter.

Phone: 888-401-6367 EXT 703 931-797-8029 Handles logs up to 32”. Uses

vans and produce 6 - 8 loads per

but electronic option is available.

Contact: AUSTIN

condition.

Easily produces high Email: Austin@lumbermensco.com

drum design. Can easily load 42’ day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644.20 Sam x702 Morbark Chipharvester Item ID: 38035 FIREWOOD PROCESSORS

Contact: SAMWood Processor 2010 Shop Built Email: Sam@lumbermensco.com - ItPhone: has a 353 Detroit diesel, 888-401-6367 EXT40702 inch insert tooth circle saw, 30 foot

 Issue 364 403

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with 848L a 10’ 2015 John Deere

Itema hydraulic ID: 83128 grapple, log deck. Has

chain and kicker that all runs off Contact: AUSTIN Email: Austin@lumbermensco.com ofPhone: a 4 cylinder Mercedes power 888-401-6367 EXT 703 unit. Has 931-797-8029 a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

well built processor. Item ID 13820.

Sam2009 x702 Valmet 840.4 Item ID: 79249 Firewood Processor - This is aContact: ChomperAUSTIN Model 16 PDA Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 automatice firewood processor 931-797-8029 with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

John Deere 648H

Sam x702 Grapple Skidder Item ID: 96833 LOGGING EQUIPMENT

Contact: SAMBANDIT Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 -

3412 Caterpillar180E DieselLoader engine Prentice with 850 HP. 5300 hrs.

Mill in & CTR saw Item ID: 99822 good condition.

Just finished 10

Contact: AUSTIN Acre clearing job, ready to work!

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Remote control. Big production

 List  seLL  exchange  buy  save

Item ID: 13920 Item ID: 60608 Contact: Austin Contact: SAM Email: Ph:Sam@lumbermensco.com (888) 401-6367 x703 Phone: 888-401-6367 EXT 702

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

MC 166 grapple, 5,000Rotochopper original hours.

Item ID: 8165 (excellent condition.). Item ID Contact: SAM 13238.

Chris x700

Email: Sam@lumbermensco.com

1995 Barko 775 B FellerEXT Buncher Phone: 888-401-6367 702

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

Tigercat 830C

meterLeveling dont work. The last 2 owners Cutter 94337 have onlyItem usedID: it to load trucks or

as a backup Contact: SAM as needed. Has a CTR Email: Sam@lumbermensco.com

delimber, grapple EXT has702 been rebuilt.

Phone: 888-401-6367 Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

Cat 515 Cable BELL Skidder

Item ID: 99873 1990 Bell Super T - This Bell has

SAM aContact: brand new Duetz engine. Lever Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM Call 888.401.MENS NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

John Deere 540B Item 0908 The ID: Tree

that Contact: SAMStarted Email: Sam@lumbermensco.com it All! Phone: 888-401-6367 EXT 702 Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

Cat 535C Grapple ADVERTISING SALES Skidder Morris Woods

ID: 50218 (888)Item 401-6367 ext. 704

morris@lumbermens.co Contact: SAM Email: Sam@lumbermensco.com MARKETING DIRECTOR Phone: 888-401-6367 EXT 702

John Deere 650H LGP Item ID: 84627

Contact: SAM Sam@lumbermensco.com 72NDEmail: ANNUAL GREAT LAKES Phone: 888-401-6367 EXT 702

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Selma, North Carolina www.midatlantic-logging-biomass­ MID-ATLANTIC John Deere 540D 2007 Cat 517 expo.com/ LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Contact: SAM Contact: AUSTIN Email: Austin@lumbermensco.comFri, Email: Sam@lumbermensco.com 15 Sept Sat, 16 Sept Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 702 Lexington, Kentucky

931-797-8029 http://www.kfia.org/ KentuckyWoodExpo.aspx

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Send address changes to: 2013 John Deere 753J Lumberman's Exchange Item ID: 99902 P.O. Box 1916 Contact: AUSTIN TN 38402 Columbia,

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 The Lumberman's Exchange is

OR 931-797-8029

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers Dymax Skidsteer Tree Cutter and writers, the Lumberman's ID: 96694 Exchange, Item its principles and associates, not held liable for Contact:are AUSTIN errors orAustin@lumbermensco.com omissions. Reproduction, Email: 888-401-6367 EXTwith­ 703 inPhone: whole or part, is prohibited written931-797-8029 out consent. ©2017 Woods Publishing

Item ID: 5613

Item ID: 60554

DESIGN DIRECTOR Sam Wall 2009 2384 Prentice (888) 401-6367 ext. 702 Knuckleboom Loader sam@lumbermens.co Item ID: 83019 Austin Woods Contact: SAM (888) 401-6367 ext. 703 Email: Sam@lumbermensco.com austin@lumbermens.co Phone: 888-401-6367 EXT 702

Hot Springs, ItemArkansas ID: 92188 www.arkloggers.com

2012 Eco Log 590D

John Deere 540G3

** INFO LINK** Item ID: 99996

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

Item ID: 99991

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

OR 931-797-3915

BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly

‘03 John Deere 748GIII

ID:machine 13851 since it 10 hoursItem on this

has been rebuilt, Contact: SAM it has a 24foot in Email: Sam@lumbermensco.com feed deck 20 foot out feed deck Phone: 888-401-6367 EXT 702 with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This

Mulcher is anFranklin extremely accurate machine Item ID: 99927 in ve1y good condition, Cuts 130 Contact: SAMalso has CLT presses. feet a minute Email: Sam@lumbermensco.com Phone: Item ID888-401-6367 13876. Austin EXT x703702 S & W 125 Band Mill with Caterpillar generator - Low hours

L O G G I N G

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August Sat, 26 August Cat 939- Crawler Loader

See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

on the mill, electronic computer Set

works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434.

Sam x702

2003 CARRIAGES Tigercat 250 & Log Loader DRIVES

Item ID: 46268 2010 Cardinal HD Carriage Contact: WALKER Carriages (Sawmill) - Cardinal Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck (AIM)450 ........ 36 95Equipment Timberjack

Morbark ..................................... 9

Log Max 7000

Dual Arch Skidder 32 Corley Mfg ..............................

Item ID: 12270 CRD Metalworks .................... 25

Barko 395ML

Multitek Item ...................................

12 ID: 99943 Contact:Saw WALKER Piper's Shop.................... 13

Contact: AUSTIN Email: Austin@lumbermensco.com CW Mill-ArmorHog 17 Phone: 888-401-6367 EXT 703 OR..............

931-797-8029

Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 Rotochopper ............................ 40

OR 931-797-3915

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Controls ..... 10 2013 Industrial John Deere 437D Item ID: 96805 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Universal Refiner ................... 23 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 WoodMizer ................................ l

931-797-8029

John Deere 440C

ID: 99999 Iron BullItem ...................................

21 Contact: KilgoreWALKER Saw ............................. 22 Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 ................................. 24 Lignomat OR 931-797-3915

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw Item ID: 96628

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

Tigercat 630C Item ID: 83971

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net 931-797-8029 800.S48.6914 I S73.663.7711

❘ L!  (888) 401-MENS 401-MENS

NO. 35

Phone

315.284.4126 PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM TO VIEW DESCRIPTION, Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

“Precision Under Pressure”

1997 Timberjack 460 Cable Skidder

Timberjack 460 Dual Arch Item ID: 91657

Item ID:24393

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Tigercat 234 Knuckle Boom Loader

Clark 667

Item ID: 68516

Item ID: 59500

L O G G I N G

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘16 Peterson Halverson H140 Chipper Item ID:(DEMO) 52045 Skidsteer

Contact: AUSTIN Item ID: JW-909632 Email: Austin@lumbermensco.com Contact: J Williams Phone: 888-401-6367 EXT 703 OR 931-797-8029

Ph: (888) 401-6367 x701

JD 437D loader Item ID: 35922

‘13 KMC 2500 Track Skidder

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

Caterpillar D4H Item ID: 99982

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

‘83 John Deere 4850

Item ID: 14073 Contact: Austin John401-6367 Deere 440A Ph: (888) x703

Cable Skidder

Item ID: 99941 with 1700 hours, in very good Contact: WALKER

condition.

Easily produces high Email: Walker@lumbermensco.com

‘Cone’

drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644.

Sam28000 x702 Hood Item ID: 18775 FIREWOOD PROCESSORS

2010 Shop Built Wood Processor Contact: AUSTIN Email: Austin@lumbermensco.com - ItPhone: has a 353 Detroit diesel, 888-401-6367 EXT40703 931-797-8029 inch insert tooth circle saw, 30 foot  Issue 364 403

Item ID: 8834

Contact: SAM Email: Sam@lumbermensco.com ‘05 Gehl CTL 70EXT 702 Phone: 888-401-6367

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

Phone: 888-401-6367 EXT 707 quality chips with patented OR 931-797-3915

John Deere 437D Log Loader

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

John Deere 750J

Best Value Portable Log Splitter Forestry Dozer - Small manufacturer in PA has Item ID: 62252

well built processor. Item ID 13820.

Sam x702 ‘06 CAT 517 ID: 13869 FirewoodItem Processor - This is

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade a 10’ Johnprocessor Deere with 437D Item ID: 10075 log deck. Has a hydraulic grapple,

Contact: AUSTIN chain and kicker that all runs off Email: Austin@lumbermensco.com ofPhone: a 4 cylinder MercedesEXT power 888-401-6367 703 931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Item ID: 13920

Contact: AUSTIN Contact: Austin Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 x703 Ph: (888) 401-6367 OR 931-797-8029

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Tigercat 240B Knuckle Boom Loader

grapple, 5,000 original hours.

good. in good working order. 22in

amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased

PRENTICE new2005 for $32,500.

Item ID210E 13865.

Sam x702LOG LOADER Item ID: 99946

LOGGING EQUIPMENT BANDIT

50% or better. 475 hp Cummins

adjustable to single two way. Great

‘95 John Deere C6 2004 Timbco 425 EXL Tree Farmer Item ID: 99855

tach, oil pressure, water temp and

low hours. Control panel includes

but electronic option is available.

Has Log Lift. Uses 4-way wedge

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

(excellentItem condition.).

Item ID ID: 76297 13238. Chris x700 Contact: SAM Email: Sam@lumbermensco.com 1995 Barko 775 B Feller Buncher Phone: 888-401-6367 EXT 702 - Pumps recently redone. 400 hrs

Email: Sam@lumbermensco.com Phone: 888-401-6367 Handles logs up to EXT 32”.702 Uses

13HP Honda motor. Manual start

Item ID: 14077 John Deere 748G3 Contact: Austin Item ID: 99990 Ph: (888) 401-6367 x703

aContact: ChomperSAM Model 16 PDA Email: Sam@lumbermensco.com automatice firewood processor Phone: 888-401-6367 EXT 702 with John Deere power unit with

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 1999 Bandit 1900 Tracked Disc OR 931-797-3915

made theSAM best valued log splitter.

Contact:

‘93 Barko 180B

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine

John Deere 648D

with 850 Item HP. 5300 Mill in ID: hrs.

99942

good condition. Just finished 10 Contact: WALKER

Email: Walker@lumbermensco.com Acre clearing job, ready Phone: 888-401-6367 EXT 707to work!

OR 931-797-3915

Remote control. Big production

 List  seLL  exchange  buy  save

on injection pump. always started kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

Barko 160B Self-

meterPropelled dont work. The last 2 owners Loader have onlyItem usedID: it to load trucks or 99812

as a backup Contact: SAM as needed. Has a CTR Email: Sam@lumbermensco.com

delimber, grapple EXT has702 been rebuilt.

Phone: 888-401-6367 Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702 2013

John Deere 748H Item ID: 85729 BELL

1990 Bell Super T - This Bell has Contact: AUSTIN Email: Austin@lumbermensco.com a brand new Duetz engine.

Lever Phone: 888-401-6367 EXT 703 931-797-8029 control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

Item ID: 14109

The Tree

Contact: AUSTIN that Started Email: Austin@lumbermensco.com Phone: 888-401-6367 it All! EXT 703 OR 931-797-8029 Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

ADVERTISING SALESArch Tigercat 630 C Dual

Item ID: 59580 Hot Springs, Arkansas www.arkloggers.com Contact: AUSTIN

Item ID: 99947

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

72ND ANNUAL LAKES ORGREAT 931-797-8029 LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Item ID: 99944

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

May be sent to­ morris@lumbermens.co

POSTMASTER

Send address changes 2015 Cat 563C to: Lumberman's Exchange Item ID: 72531 P.O. Box 1916 Contact: AUSTIN Columbia, TN 38402 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 The Lumberman's Exchange is OR 931-797-8029

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Timberjack 380C Exchange, its principles and Item ID: 72259 associates, are not held liable for errors or omissions.

Reproduction, Contact: WALKER inEmail: wholeWalker@lumbermensco.com or part, is prohibited with­ out written888-401-6367 consent.

Phone: EXT 707 ©2017 Woods Publishing

it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This

Log Excavator 225 LC is anLoader/ extremely accurate machine Item ID: 51519 in ve1y good condition, Cuts 130

Item ID: 99945

KENTUCKY WOOD EXPO Contact: WALKER Walker@lumbermensco.com Fri, Email: 15 Sept - Sat, 16 Sept Phone: 888-401-6367 EXT 707 Lexington, Kentucky OR 931-797-3915

Contact: AUSTIN Email: feet aAustin@lumbermensco.com minute also has CLT Phone: 888-401-6367 EXT 703 OR 931-797-8029

John Deere 648l

S & W 125 Band Mill with Caterpillar generator - Low hours

on the mill, electronic computer Set

works,1 1/2" or 2" band, 22ft. track

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434.

Sam x702 Barko 495 ML 2008 Item ID: 7648 CARRIAGES & DRIVES

John Deere 437D

** INFO LINK** Item ID: 96378

Item ID: 99939

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

presses.

Item ID 13876. Austin x703

http://www.kfia.org/ KentuckyWoodExpo.aspx

Cambridge, Ohio www.ohioforest.org

Delimber Austin Woods

AD SUBMISSIONS

that go up and down, with airbags,

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

Sam Wall (888) 401-6367 ext. 702 Komatsu PC270LC sam@lumbermens.co

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

bells and whistles, its a production machine, with air strain conveyers

Selma, North Carolina www.midatlantic-logging-biomass­ SATCO 318T MID-ATLANTIC expo.com/ LOGGING & BIOMASS EXPO chipper Morbark 23 disc processing head

Donna Heninger

MAILING ADDRESS

with 44 inch wheels, and all the

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

EQUIPMENT REPS

Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

ID:machine 99963 since it 10 hoursItem on this

has beenAUSTIN rebuilt, it has a 24foot in Contact: Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703deck feed deck 20 foot out feed 931-797-8029

Escanaba, Michigan

DESIGN DIRECTOR

Item ID: 43950 (888) 401-6367 ext. 703 Contact: SAM austin@lumbermens.co

Danckaert Band Resaw848H - Roughly 12’ John Deere

L O G G I N G

Morris Woods Item ID: 10836 (888) 401-6367 ext. 704 Contact: AUSTIN morris@lumbermens.co Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 MARKETING DIRECTOR 931-797-8029 John Williams (888) 401-6367 ext. 701 j@lumbermens.co

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Sat, 573 26 August Tigercat 630C Fri, 25 August -Cat

01’ Ponsee Bison Forwarder

Contact: AUSTIN 2010 Cardinal HD Carriage Email: Austin@lumbermensco.com Carriages (Sawmill) - Cardinal Phone: 888-401-6367 EXT 703 931-797-8029 Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) Excavator 330Lx Link........

Belt36 Item ID: 70897 Corley Mfg .............................. 32

Morbark ..................................... 9

CW Mill-Hogzilla ................... 15 Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

CW Mill-ArmorHog .............. 17

Timbco 445D 14 Hurst‘00 Boiler .............................

Item ID: 14096 Iron Bull ................................... 21 Contact: AUSTIN Email: Austin@lumbermensco.com Kilgore Saw ............................. 22 Phone: 888-401-6367 EXT 703 931-797-8029 24 LignomatOR .................................

- USED FORESTRY EQUIPMENT FOR SALE

❘

drive, hyd pac for carriage,

48" bottom and 36" top saw 540Bsaw John Deere

Cable Skidder

Timbco 425EXL Barsaw

Multitek ................................... 12 Item ID: 74878 Piper's Saw Shop.................... 13 Contact: SAM Email: Sam@lumbermensco.com Rotochopper............................ 40 Phone: 888-401-6367 EXT 702 Row Electric ............................ 20

Contact: AUSTIN Email: CRDAustin@lumbermensco.com Metalworks .................... 25 Phone: 888-401-6367 EXT 703 OR 931-797-8029

with onboard log turners, carriage

'01 John Deere 648G3 Thomas Industrial Controls ..... 10 Item ID: 90899 Union Grove Saw & Knife.. 2, 37 Contact: SAM Universal Refiner ................... 23 Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 l WoodMizer ................................

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

STACKING RAC

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 or 931-797-3915

Timbco 425C Item ID: 99948

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 www.BakerProducts.net OR 931-797-3915

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 37

Phone

315.284.4126 PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM TO VIEW DESCRIPTION, MOST WANTED!

“Precision Under Pressure”

Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Cat 527 Swingboom Grapple Skidder Dozer Item ID: 99841

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

John Deere 648G3 Item ID: 99992

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

Timberjack 360C

John Deere 210G

Item ID: 89706

L O G G I N G

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Item ID: 99983

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

FEATURED!

JD 648G Grapple Skidder ‘16 Halverson H140 Item ID: 54867 Skidsteer (DEMO)

Contact: AUSTIN Item ID: JW-909632 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Contact: J Williams 931-797-8029

Ph: (888) 401-6367 x701

Timberpro 620 Item ID: 79674

Contact: AUSTIN ‘13 KMC 2500 Track Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Skidder 931-797-8029

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703 off onto a conveyor. This is a very

Morbark 30XL Item ID: 13937

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

John Deere 650G

Item ID: 99852 with 1700 hours, in very good Contact: WALKER

Email: Walker@lumbermensco.com condition.

Easily produces Phone: 888-401-6367 EXT 707 high OR 931-797-3915

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644.

Sam525 x702 CAT Item ID: 99853 FIREWOOD PROCESSORS

Contact: 2010 ShopWALKER Built Wood Processor Email: Walker@lumbermensco.com

707 40 - ItPhone: has a888-401-6367 353 DetroitEXT diesel, OR 931-797-3915

inch insert tooth circle saw, 30 foot  Issue 364 403

Tracked Log Picker/ Skidder Equipment Item ID: 99859

Contact: SAM

Email: Gehl Sam@lumbermensco.com ‘05 CTL 70 Phone: 888-401-6367 EXT 702

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

1995 Bell ultra T Best Value Portable Log Splitter Item ID: 100003 - Small manufacturer in PA has

well built processor. Item ID 13820.

‘93 Barko 180B

ItemJohn ID: 14077 Deere 648L Contact: Austin Item ID: 99993 Ph: (888) 401-6367 x703 Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

‘95 John Deere C6 Timberpro 745C Tree Farmer Item ID: 99938 Item ID: 13920

Contact: AUSTIN Contact: Austin Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Ph: (888) 401-6367 x703 931-797-8029

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Cat 525D Grapple skidder w/Winch

VALMET Sam x702 840.2 FORWARDER Item ID: 9770 Firewood Processor - This is AUSTIN aContact: Chomper Model 16 PDA Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 automatice firewood processor 931-797-8029 with John Deere power unit with

(excellentItem condition.).

Item ID ID: 99857 13238.

Chris x700 Contact: SAM

tach, oil pressure, water temp and

good. in good working order. 22in

low hours. Control panel includes amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

‘00 Timberjack 1110

Sam x702Item ID: 14033

LOGGING EQUIPMENT Contact: AUSTIN Email: Austin@lumbermensco.com BANDIT

grapple, 5,000 original hours.

Email: Sam@lumbermensco.com 1995 Barko 775 B Feller Phone: 888-401-6367 EXT 702Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 Q70 hours. Hour Franklin

Item ID:The 5458 meter dont work. last 2 owners

931-797-3915 Handles OR logs up to 32”. Uses

Phone: 888-401-6367 EXT 703 1999 Bandit 1900 Tracked Disc 931-797-8029

have only AUSTIN used it to load trucks or Contact: Email: Austin@lumbermensco.com as a backup as needed. EXT Has703 a CTR Phone: 888-401-6367 931-797-8029 delimber, grapple has been rebuilt.

but electronic option is available.

50% or better. 475 hp Cummins

Item ID 13694. Sam x702

Contact: WALKER

Email: the Walker@lumbermensco.com made best valued log splitter.

Phone: 888-401-WT 707

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Valmet 430FXL with Komatsu 233 barsaw

homemade processor with a 10’

log deck. Has hydraulic Itema ID: 99908 grapple, chain and kicker Contact: SAM that all runs off Sam@lumbermensco.com ofEmail: a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 702 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine John Deere 648G3 with 850 HP. 5300 Mill in Item ID: hrs.

99987

good condition.

Contact: WALKER Just finished 10 Email: Walker@lumbermensco.com

Acre clearing job, ready Phone: 888-401-6367 EXT 707to work!

OR 931-797-3915

Remote control. Big production

 List  seLL  exchange  buy  save

Boom cylinders have minor leaks.

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

Hydro Ax 611E Item ID: 58544 BELL

1990 Bell Super T - This Bell has Contact: AUSTIN Email: Austin@lumbermensco.com a brand 888-401-6367 new Duetz engine.

Lever Phone: EXT 703 931-797-8029 control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

Item 98053 TheID: Tree that Started Contact: AUSTIN Email: Austin@lumbermensco.com it All! EXT 703 Phone: 888-401-6367

931-797-8029 Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

Franklin 170 ADVERTISING SALES

Item ID: 99827 Morris Woods (888) 401-6367 ext. 704 Contact: WALKER Email: Walker@lumbermensco.com morris@lumbermens.co Phone: 888-401-6367 EXT 707 OR 931-797-3915 MARKETING DIRECTOR

John Deere 648G III John Deere 640D Fri, 25 2006 August - Sat, 26 August Item ID: 100008 Hot Springs, Arkansas www.arkloggers.com Contact: JOE

Item ID: 99845

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 72ND ANNUALORGREAT LAKES 801-362-2170

LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

May be sent to­ morris@lumbermens.co

POSTMASTER

Send changes to: 848 Gaddress Grapple Skidder

Lumberman's Exchange Item ID: 85843 P.O. Box 1916 Contact: AUSTIN Columbia, TN 38402 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 The Lumberman's Exchange is 931-797-8029

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Timbco 425EXL Exchange, Item its principles and ID: 99998 associates, are not held liable for Contact: WALKER Reproduction, errors or omissions.

Walker@lumbermensco.com inEmail: whole or part, is prohibited Phone: 888-401-6367 EXT 707 with­ out written ORconsent.

931-797-3915 ©2017 Woods Publishing

bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

Selma, North Carolina www.midatlantic-logging-biomass­ MID-ATLANTIC John Deere 650H CAT 515 expo.com/ LOGGING & BIOMASS EXPO Item ID: 50512

is supported on both sides. This

Tigercat 620Emachine is an extremely accurate Item ID: 99984 in ve1y good condition, Cuts 130

Item ID: 99856

KENTUCKY WOOD EXPO Contact: AUSTIN Contact: WALKER Walker@lumbermensco.com Email: Austin@lumbermensco.comFri, Email: 15 Sept Sat, 16 Phone: 888-401-6367 EXT Sept 707 Phone: 888-401-6367 EXT 703 OR 931-797-3915 931-797-8029 Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

Contact: WALKER feet aWalker@lumbermensco.com minute also has CLT presses.

Email: Phone: 888-401-6367 EXT 707 Item IDOR13876.

Austin x703 931-797-3915

S & W 125 Band Mill with Caterpillar generator - Low hours

on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

Donna Heninger

AD SUBMISSIONS

with 44 inch wheels, and all the

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

Contact: has beenJOE rebuilt, it has a 24foot in Email: Joe@lumbermensco.com Phone: 888-401-6367 709deck feed deck 20 foot outEXT feed OR 801-362-2170

Escanaba, Michigan

DESIGN DIRECTOR Sam Wall (888) 401-6367 ext. 702 '93 John Deere 548E sam@lumbermens.co Item ID: 14184 Austin Woods Contact: AUSTIN ext. 703 (888) 401-6367 Email: Austin@lumbermensco.com austin@lumbermens.co Phone: 888-401-6367 EXT 703 931-797-8029 MAILING ADDRESS

Danckaert Band Resaw - 450C Roughly 1994 Timberjack Item ID: 100009 10 hours on this machine since it

Prentice 180

Tigercat 615C

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

** INFO LINK** Item ID: 7822

L O G G I N G

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO

Timbco 425D

Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434.

Sam x702

John Deere 540B

CARRIAGES & DRIVES Item ID: 99986

Item ID: 17058

2010 Cardinal Contact: WALKERHD Carriage Email: Walker@lumbermensco.com Carriages (Sawmill) Cardinal Phone: 888-401-6367 EXT -707 OR 931-797-3915

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment Prentice (AIM) 210 E ........ 36 Item ID: 98009 Corley Mfg ..............................

32

Mor barkTimberjack .....................................

1994 240 B9 Item ID:74044 Multitek ................................... 12

John Deere 648G3 Grapple Skidder

Contact: AUSTIN .................... 25 CRD Metalworks Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 CW Mill-ArmorHog 931-797-8029 .............. 17

Contact: WALKER Piper's Saw Shop.................... 13 Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 70740 Rotochopper ............................

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

John Deere 648H

Iron Bull ...................................

21 Item ID: 100006 Contact: KilgoreWALKER Saw ............................. 22 Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 Lignomat ................................. 24 OR 931-797-3915

- USED FORESTRY EQUIPMENT FOR SALE

❘

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC Item ID: 51014

'04 John Deere 700H Thomas Industrial Controls ..... 10 Item ID: 14187 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Email: Austin@lumbermensco.com Universal Refiner ...................

Phone: 888-401-6367 EXT 70323 931-797-8029 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

2010 Tigercat 724E Item ID: 14247

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029 www.BakerProducts.net 800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 39

Phone

315.284.4126 PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM TO VIEW DESCRIPTION,

“Precision Under Pressure”

Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

John Deere 540D Cable Skidder Item ID: 99277

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

JD 648 G3 Grapple Skidder Item ID: 4572

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Treefarmer C7T GM ‘16 Halverson H140 Grapple/Winch Skidder Item ID: 11726 Skidsteer (DEMO)

‘93 Barko 180B

96’ John Deere 643D Item ID: 14077 Item ID: 14207 Contact: Austin Ph: (888) 401-6367 x703 Contact: AUSTIN

Contact: Item ID:AUSTIN JW-909632 Email: Austin@lumbermensco.com Contact: J Williams EXT 703 Phone: 888-401-6367 931-797-8029 Ph: (888) 401-6367 x701

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

90's Model Timberjack 240A Item ID: 14111

‘95 John Deere C6 Hydro Ax 411 Tree Farmer Item ID: 98954

Contact: WALKER ‘13 KMC 2500 Track Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 Skidder

Contact: AUSTIN Contact: Austin Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Ph: (888) 401-6367 x703 931-797-8029

FEATURED HOT-BUY!

Prentice 2432 (’09)

Cat D4H TSK Grapple w/ Winch Equipment Item ID: 99843

L O G G I N G

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Item ID: 89885

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 801-362-2170

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

Prentice 180E Item ID: 99846

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

John Deere 640D Cable Skidder

with 1700 hours, in very good Item ID: 43930

condition.

Easily produces high Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

John Deere 648H Grapple FIREWOOD w/Winch PROCESSORS Equipment

2010 Shop Item Built Wood Processor ID: 99849 - ItContact: has aSAM 353 Detroit diesel, 40 Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

inch insert tooth circle saw, 30 foot  Issue 364 403

Rayco 160 Forestry Mulcher Item ID: 77447

Contact: SAM

Email: Sam@lumbermensco.com ‘05 Gehl CTL 70 Phone: 888-401-6367 EXT 702

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

2014Portable Prentice Best Value Log 2210 Splitter “Self Propelled”

- Small manufacturer in PA has Item ID: 99900

made the best valued log splitter.

Contact: AUSTIN

well built processor. Item ID 13820.

Sam x702

John Deere 450H LGP Firewood Processor - This is Item ID: 99891 a Chomper Model 16 PDA Contact: SAM

Email: Sam@lumbermensco.com automatice firewood processor Phone: 888-401-6367 EXT 702

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

08’ Valmet 415EX Sam x702 Item ID: 99923

LOGGING EQUIPMENT Contact: AUSTIN Email: Austin@lumbermensco.com BANDIT

Email: Austin@lumbermensco.com Handles logs up to 32”. Uses

Phone: 888-401-6367 EXT 703 931-797-8029 1999 BanditOR1900 Tracked

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Johnprocessor Deere 859M homemade with a 10’

Tracked Cutter w/ log deck. Has a hydraulic grapple, Quadco 3200 Barsaw chain andItem kickerID: that all runs off 31379 ofContact: a 4 cylinder SAM Mercedes power Email: Sam@lumbermensco.com

Phone: 888-401-6367 702 unit.

Has a 4’ chainEXT saw that kicks

Lumbermens™  since 1986

❘

Disc

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine

Item ID: 13920

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Cat5,000 559B Knuckle grapple, original hours.

Boom Loader

(excellent condition.). Item ID Item ID: 99872 13238. Chris x700 Contact: SAM

Email:Barko Sam@lumbermensco.com 1995 775 B Feller Buncher Phone: 888-401-6367 EXT 702

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500Deere hours. Hour 540B John

Cable Skidder meter dont work.

The last 2 owners have onlyWALKER used it to load trucks or Contact: Email: Walker@lumbermensco.com

as a backup as needed.

Phone: 888-401-6367 EXTHas 707 a CTR

or 931-797-3915 delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam

Timberjack 225 Cable Skidder

x702

good condition. Just finished 10 Contact: AUSTIN Email: Austin@lumbermensco.com Acre clearing job, ready to work!

Phone: 888-401-6367 EXT 703 Remote control.

Big production 931-797-8029

1990 BellItem SuperID: T 46567 - This Bell has

with 850 HP. 5300 Mill in Item ID: hrs.

99817

 List  seLL  exchange  buy  save

Bell Ultra-C Tracked BELL Cutter

aContact: brandSAM new Duetz engine. Lever Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

Timbco 425Exl Fri, 25 August 648 E-Cable Sat, 26Skidder August

Item ID: 1020

The Tree

Contact: AUSTIN that Started Email: Austin@lumbermensco.com Phone: 888-401-6367 it All! EXT 703 OR 931-797-8029 Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

Barko 495B ADVERTISING SALES

Item ID: 84253

Contact: AUSTIN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 888-401-6367 EXT 703 72NDPhone: ANNUAL GREAT LAKES 931-797-8029 931-797-8029

May be sent to­ morris@lumbermens.co

POSTMASTER

Send to: Johnaddress Deerechanges 650K LGP Lumberman's Forestry Exchange Dozer P.O. ItemBox ID: 1916 85213 Columbia, TN 38402

Contact: SAM Email: Sam@lumbermensco.com The Lumberman's Exchange Phone: 888-401-6367 EXT 702 is

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content by advertisers Catsubmitted D5H TSK Grapple and writers, the Lumberman's Dozer Exchange, Winch its principles and 99809 associates, Item are notID: held liable for errors or omissions. Reproduction, Contact: SAM inEmail: wholeSam@lumbermensco.com or part, is prohibited with­ out written consent.

Phone: 888-401-6367 EXT 702 ©2017 Woods Publishing

that go up and down, with airbags, it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ MID-ATLANTIC ‘89expo.com/ Timberjack 380A John Deere 648G3 LOGGING & BIOMASS EXPO Item ID: 14039

pressure guides. Top Casting wheel

Contact: AUSTIN KENTUCKY WOOD EXPO Contact: AUSTIN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Fri, 15 Sept Sat, 16 Sept Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 931-797-8029 931-797-8029 Lexington, Kentucky

Contact: JOE Email: feet a Joe@lumbermensco.com minute also has CLT presses.

Phone: 888-401-6367 EXT 709 OR 801-362-2170 Item ID 13876.

Austin x703

is supported on both sides. This

Timberjack 1270C

is an extremely accurate Item ID: 8676 machine

Item ID: 58995

in ve1y good condition, Cuts 130

http://www.kfia.org/ KentuckyWoodExpo.aspx

S & W 125 Band Mill with Caterpillar generator - Low hours

on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

‘80 John Deere 550

Tigercat 604 Cable Skidder

AD SUBMISSIONS

bells and whistles, its a production machine, with air strain conveyers

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

with 44 inch wheels, and all the

Escanaba, Michigan

Donna Heninger

MAILING ADDRESS

Contact: AUSTIN Email: feedAustin@lumbermensco.com deck 20 foot out feed deck Phone: 888-401-6367 EXT 703 OR 931-797-8029

LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

EQUIPMENT REPS

Phone: 888-401-6367 EXT 702

- Fabtech 10Harvestor hours on this machinehead since it Item ID: 99821 has been rebuilt, it has a 24foot in

ItemArkansas ID: 87791 Hot Springs, www.arkloggers.com Contact: AUSTIN

DESIGN DIRECTOR

Item ID: 6552 Austin Woods (888) 401-6367 ext. 703 Contact: SAM Email: Sam@lumbermensco.com austin@lumbermens.co

2001 Cat Band 311CU Processor/ Danckaert Resaw - Roughly

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org Timberpro TL735B Tracked Feller Buncher

** INFO LINK** Item ID: 14037

Item ID: 64107

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

L O G G I N G

Item ID: 44764 Morris Woods (888) 401-6367 Contact: AUSTIN ext. 704 morris@lumbermens.co Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 MARKETING DIRECTOR 931-797-8029 John Williams (888) 401-6367 ext. 701 j@lumbermens.co

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO

John Deere 437C

Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434.

JD 648H (’08) Sam x702 Item ID: 6051 CARRIAGES & DRIVES

Contact: JOE HD Carriage 2010 Cardinal Email: Joe@lumbermensco.com Phone: 888-401-6367 709 Carriages (Sawmill)EXT - Cardinal OR 801-362-2170

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck (AIM) ........

‘98Equipment 611 Ex-Hydro Ax 36 Item ID: 13948 Corley Mfg .............................. 32 Contact: AUSTIN CRD .................... 25 Email:Metalworks Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 CW Mill-ArmorHog .............. 17 OR 931-797-8029

‘85 John Deere 440D 9 Mor bark .....................................

Item ID: 12453 Multitek ................................... 12 Contact: AUSTIN Email: Austin@lumbermensco.com Piper's Shop....................

Phone:Saw 888-401-6367 EXT 70313 OR 931-797-8029 Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

CAT 525C 14 Hurst2011 Boiler .............................

Item ID: 14203 Iron Bull ................................... 21 Contact: AUSTIN Email: Austin@lumbermensco.com Kilgore 888-401-6367 Saw .............................

Phone: EXT 703 22 931-797-8029 Lignomat ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE

❘

‘05Industrial Tigercat 230B Thomas Controls ..... 10 Item ID: 13911 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Email: Austin@lumbermensco.com Universal Refiner ...................

Phone: 888-401-6367 EXT 70323 OR 931-797-8029 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

648 G Skidder Item ID: 76963

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

John Deere 640D Item ID:63000

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 www.BakerProducts.net 800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 41

Phone

315.284.4126 PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM TO VIEW DESCRIPTION,

“Precision Under Pressure”

Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

L O G G I N G

JD 640D (’95) 2003 CAT 525B Item ID: 3800

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

Item ID: 51746

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 801-362-2170

Tigercat 234B Knuckle boom loader

‘80 John Deere 540B Item ID: 11345

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Item ID: 99820

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘16‘05Halverson H140 Timberjack 608B Item ID: 13898 Skidsteer (DEMO)

Item ID:SAM JW-909632 Contact: Email: Sam@lumbermensco.com Contact: J Williams Phone: 888-401-6367 702 Ph: (888) 401-6367 EXT x701

2016 John Deere 437E Item ID: 100007

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

Meadows 2 Deluxe Sawmill Package Miner Edger Item ID: 45399

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

S A W M I L L

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 Jackson Lumber

Harvester Circle Mill

03’ Woodmizer LT-300 Operation Item ID: 14171

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 ‘05 Gehl CTL 70EXT 703 OR 931-797-8029

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

drum design. Can easily load 42’

Best Value Portable Log Splitter Hurdle 2 Sawmill Item ID: 72999 - Small manufacturer in PA has Contact: SAM made the best valued log splitter.

Email: Sam@lumbermensco.com Handles up to 32”. Uses Phone: logs 888-401-6367 EXT 702 13HP Honda motor. Manual start

day. Item ID 13882. Austin x703

Has Log Lift. Uses 4-way wedge

Item ID: 2346good with 1700 hours, in very Contact:Easily SAM produces high condition.

Email: Sam@lumbermensco.com quality chips with patented Phone: 888-401-6367 EXT‘Cone’ 702

vans and produce 6 - 8 loads per

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

Breezewood Band Mill FIREWOOD PROCESSORS Item ID: 83736

2010 Shop Built Wood Processor Contact: SAM - ItEmail: has a Sam@lumbermensco.com 353 Detroit diesel, 40 Phone: EXT30702 inch insert888-401-6367 tooth circle saw, foot  Issue 364 403

but electronic option is available.

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

Baker Double End Trim Saw

log deck. Has hydraulic Itema ID: 49890 grapple, chain and kicker that all runs off Contact: SAM ofEmail: a 4 cylinder Mercedes power Sam@lumbermensco.com Phone: unit.

Has 888-401-6367 a 4’ chain saw EXT that 702 kicks

Lumbermens™  since 1986

❘

well built processor. Item ID 13820.

Sam x702 Morgan

Band Sawmill

Item ID: 100005 Firewood Processor - This is WALKER aContact: Chomper Model 16 PDA

‘93 Barko 180B

‘08 ID: John Deere 335C Item 14077 Item ID: 14089 Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘95 John Deere C6 Woodmizer LT300 Tree Farmer Item ID: 99975 Item ID: 13920

Contact: AUSTIN Contact: Austin Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Ph: (888) 401-6367 x703 931-797-8029

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

Timberjack 450C

ID: 99988 (excellentItem condition.).

Item ID

Phone: 888-401-6367 EXT processor 707 automatice firewood

Contact: WALKER 13238. Chris x700 Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707Buncher 1995 Barko 775 B Feller OR 931-797-3915

low hours. Control panel includes

on injection pump. always started

Email: Walker@lumbermensco.com OR 931-797-3915

with John Deere power unit with

tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Meadows #2 Deluxe Sam x702Item ID: 14250

- Pumps recently redone. 400 hrs

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

Rogers 4 Headblock Circle Mill

LOGGING EQUIPMENT Contact: AUSTIN Email: Austin@lumbermensco.com BANDIT Phone: 888-401-6367 EXT 703 931-797-8029 1999 BanditOR 1900 Tracked Disc

meter dont work. The last 2 owners Item ID: 23205 have only used it to load trucks or Contact: SAM as a backup as needed. Has a CTR Email: Sam@lumbermensco.com delimber, grapple has been rebuilt.

Phone: 888-401-6367 EXT 702

50% or better. 475 hp Cummins

Item ID 13694. Sam x702

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 -

CornellDiesel Edger 3412 Caterpillar engine Item ID: 33423 with 850 HP. 5300 hrs. Mill in

Contact: AUSTIN good condition.

Just finished 10 Email: Austin@lumbermensco.com Phone: 888-401-6367 703 Acre clearing job, readyEXT to work!

931-797-8029 Remote control. Big production

 List  seLL  exchange  buy  save

Boom cylinders have minor leaks.

Buying?

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

Selling?

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

1990 Bell Super T - This Bell has lumbermensco.com

a brand new Duetz engine. Lever

888.401.6367

control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

Go Fast Run Around System

The Tree Item ID: 84282 that Started Contact: SAM it All! Email: Sam@lumbermensco.com

PUBLISHER

Woods Publishing

Precision Scragg

ADVERTISING SALES Item ID: 3607

Morris Woods Contact: AUSTIN ext. 704 (888) 401-6367 Email: Austin@lumbermensco.com morris@lumbermens.co Phone: 888-401-6367 EXT 703 931-797-8029 MARKETING DIRECTOR

Item ID: 13876

Hot Springs, ItemArkansas ID: 62784 Contact: AUSTIN www.arkloggers.com Contact: SAM Email: Austin@lumbermensco.com Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 703 ANNUAL GREAT LAKES 888-401-6367 EXT 702 OR 931-797-8029 72NDPhone:

LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Caterpillar generator - Low hours on the mill, electronic computer Set

Item ID: 12432

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Desjardin Shingle Mill

Fence Post Processing Sam x702Operation

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

2010 Cardinal HD Carriage Contact: AUSTIN Email: Austin@lumbermensco.com Carriages (Sawmill) - Cardinal Phone: 888-401-6367 EXT 703 931-797-8029 Carriage line it includes carriage

Item ID: 63655

** INFO LINK**

Item ID: 42175 CARRIAGES & DRIVES

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

MACK CHN613 Buck Equipment (AIM) ........ 36 Item ID: 761 Corley Mfg .............................. 32

Contact: AUSTIN Email: Austin@lumbermensco.com CRD Metalworks .................... 25 Phone: 888-401-6367 EXT 703 OR 931-797-8029 CW Mill-ArmorHog .............. 17

Ford Service Truck9 Mor barkF650 .....................................

Item ID: 92089 Multitek ................................... 12 Contact: AUSTIN Email: Austin@lumbermensco.com Piper's Saw Shop.................... 13 Phone: 888-401-6367 EXT 703 OR............................

931-797-8029 40 Rotochopper

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Patriot GBN Nailer 14 Hurst Boiler .............................

Item ID: 99886 Iron Bull ................................... 21 Contact: SAM Kilgore Saw ............................. 22 Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 Lignomat ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE

❘

with onboard log turners, carriage drive, hyd pac for carriage,

48" Jackson bottom saw and 36" top saw 02’ Lumber Harvester Item ID: 1187

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

3 Strand Deck..... 10 Thomas IndustrialLog Controls Item ID: 14095 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Email: Austin@lumbermensco.com Universal Refiner ................... 23 Phone: 888-401-6367 EXT 703 OR 931-797-8029 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

M I S C E L L A N E O U S

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers Morbark Chipper and writers, the Lumberman's ID: 80356 Exchange, Item its principles and associates, are not held liable for Contact: AUSTINReproduction, errors or omissions.

Email: Austin@lumbermensco.com inPhone: whole or part, is prohibited 888-401-6367 EXTwith­ 703 out written931-797-8029 consent. ©2017 Woods Publishing

Baker Bandmill is an extremely accurate machine Item ID: 96085 in ve1y good condition, Cuts 130 Contact: SAMalso has CLT presses. feet a minute Email: Sam@lumbermensco.com Item ID 888-401-6367 13876. Austin x703 Phone: EXT 702 S & W 125 Band Mill with

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

Austin Woods Contact: AUSTIN (888) 401-6367 ext. 703 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 austin@lumbermens.co OR 931-797-8029

Item ID: 100057 Lumberman's Exchange Box 1916 Contact:P.O. AUSTIN TN 38402 Email:Columbia, Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029 The Lumberman's Exchange is

is supported on both sides. This

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

Cornell Gang Saw

Ford 9000/Serco 8500 Send address changes to:

pressure guides. Top Casting wheel

Contact: AUSTIN WOOD EXPO Contact: AUSTIN Email: Austin@lumbermensco.com KENTUCKY Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Fri, 15 Sept - Sat, 16 Phone: 888-401-6367 EXTSept 703 OR 931-797-8029 OR 931-797-8029

Sam Wall (888) 401-6367 ext. 702 S&W 125 High Production Mill sam@lumbermens.co Item ID: 8019

POSTMASTER

it includes two sets of Mcdonough

Item ID: 99844

Donna Heninger

May be sent to­ morris@lumbermens.co

that go up and down, with airbags,

Selma, North Carolina www.midatlantic-logging-biomass­ ‘14 Hurdle 3-HD Block Sawmill MID-ATLANTIC Corinth American Sawmill Item ID: EXPO 13997 expo.com/ LOGGING & BIOMASS

EQUIPMENT REPS

AD SUBMISSIONS

machine, with air strain conveyers

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

DESIGN DIRECTOR

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

bells and whistles, its a production

Escanaba, Michigan

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

MAILING ADDRESS

BANDMILLS & HEADSAWS

PenduBand CutResaw Off Saw Danckaert - Roughly Item ID: 10632 10 hours on this machine since it Contact: AUSTINit has a 24foot in has been rebuilt, Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT deck 703 feed deck 20 foot out feed OR 931-797-8029 with 44 inch wheels, and all the

S A W M I L L

Phone: 888-401-6367 EXT 702 Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

SOUTHWEST FOREST PRODUCTS EXPO Model 12 Circle Saw

Mobile Dimensions Danchaert Band Resaw Fri, 25 August - Sat, 26 August

Nova Dry Kiln Item ID: 83618

Contact: SAM Email: Sam@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 702

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 43

Phone

315.284.4126 PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM TO VIEW DESCRIPTION,

“Precision Under Pressure”

Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

'07 Morbark 3800 Horizontal Grinder

2016 Barko Tree Chipper Item ID: 16688

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

‘06 Cord King Model 60

M I S C E L L A N E O U S

Item ID: 14068

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Item ID: 84439

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Morbark 23 disc chipper Item ID: 99944

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

'09 Mack Truck & H140 Trailer ‘16 Halverson Item ID: 74618 Skidsteer (DEMO)

Contact: Item ID:AUSTIN JW-909632 Email: Austin@lumbermensco.com Contact: J Williams EXT 703 Phone: 888-401-6367 931-797-8029 Ph: (888) 401-6367 x701

AM General M818 Army Truck Item ID: 14576

Contact: WALKER Email: Walker@lumbermensco.com ‘13 KMC 2500 Track Phone: 888-401-6367 EXT 707 Skidder or 931-797-3915

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

Marmon Picker Truck & Pup Trailer Item ID: 59341

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Peterson 4300 Ph: (888) 401-6367 x703

Drum Chipper

‘15 Cord King M44 Item ID: 13961

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Ford Altec Bucket Truck Best Value Portable Log Splitter

quality chips with patented ‘Cone’ OR 931-797-3915

Item ID: 347 - Small manufacturer in PA has Contact: SAM made the best valued log splitter.

Email: Sam@lumbermensco.com Phone:logs 888-401-6367 EXT 702 Handles up to 32”. Uses

vans and produce 6 - 8 loads per

but electronic option is available.

Item ID: 99989 with 1700 hours, in very good Contact: WALKER

condition.

Easily produces high Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

drum design. Can easily load 42’ day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

Morbark PS8 Post Peeler FIREWOOD PROCESSORS Item ID: 63148

2010 Shop Built Wood Processor Contact: SAM - ItEmail: has a Sam@lumbermensco.com 353 Detroit diesel, 40 Phone: EXT30702 inch insert888-401-6367 tooth circle saw, foot  Issue 364 403

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

2009 Bandit 90XP Pull-

homemade with a 10’ Behind processor Wood Chippers log deck. Has a hydraulic Item ID: 86220 grapple, chain and kicker that all runs off Contact: AUSTIN Austin@lumbermensco.com ofEmail: a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 unit. Has 931-797-8029 a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

well built processor. Item ID 13820.

2007 Morbark Chipper

Sam x702 Item ID: 9658

Firewood Processor - This is Contact: WALKER aEmail: Chomper Model 16 PDA Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 automatice firewood processor or 931-797-3915 with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased

new for $32,500.

Item -ID 13865.

Bandit Grinder Chipper Sam x702Item ID: 72593

‘93 Barko 180B

Item ID: 14077 Bandit 1850 Chipper Contact: Austin Item ID: 80543 Ph: (888) 401-6367 x703

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘95 John Deere C6

09 Rotobec Loader on Tree Farmer '87 Peterbuilt

Item ID: 13920 Item ID: 1101 Contact: Austin Contact: AUSTIN 401-6367 x703 Ph: (888) Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703OR 931-797-8029

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, original Prentice5,000 410EX truck hours. mounted

knuckle boom loader (excellent condition.).

Item ID Item ID: 70691 13238. Chris x700

Contact: SAM 1995 Barko 775 B Feller Buncher Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with

2014 Morbark M20R approximately 1500 hours.

Hour Forestry Track Chipper

LOGGING EQUIPMENT Contact: AUSTIN Email: Austin@lumbermensco.com BANDIT Phone: 888-401-6367 EXT 703 931-797-8029 1999 Bandit 1900 Tracked Disc

meter dont work. The last 2 owners Item ID: 46375 have only used it to load trucks or Contact: AUSTIN as a backup as needed. Has a CTR Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 delimber,931-797-8029 grapple has been rebuilt.

50% or better. 475 hp Cummins

Item ID 13694. Sam x702

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine

Morbark 6036 Chipper

with 850 HP. 5300 Mill in Item ID: hrs.

75143

good condition. Just finished 10 Contact: SAM Acre clearing job, ready to work!

Email: Sam@lumbermensco.com Phone:control.

888-401-6367 EXT 702 Remote Big production

 List  seLL  exchange  buy  save

Boom cylinders have minor leaks.

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam

Tajfun Firewood Processor x702 Item ID: 14249

BELL

Contact: AUSTIN 1990 Bell Super T - This Bell has Email: Austin@lumbermensco.com aPhone: brand new Duetz engine.

Lever 888-401-6367 EXT 703 OR 931-797-8029 control, 33” bar, pump and tranny

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 45

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

AD DIRECTORY Air System Mfg. ..............................................29 ..................................................828-757-3500 Anson ................................................................15 ..................................................800-663-7723 B & B Mfg. .......................................................28 ..................................................800-654-5320 B. H. Payne ......................................................18 ..................................................404-761-8711

‘93 Barko 180B

Bell's Machining..............................................20 ..................................................888-995-1965

‘16 Halverson H140 Item ID: 14077 Boulware Equipment LLC .............................9 .....................................................704-651-6061 Contact: Austin Skidsteer (DEMO) Brute Force ......................................................19 ..................................................715-678-0037 Blockbuster Inc. ..............................................22 ..................................................888-775-4883

Ph: (888) 401-6367 x703

Item ID: JW-909632 Buck Equipment (AIM) ..................................28 ..................................................800-803-3365

Contact: J Williams Cord King .........................................................4 ................................................ 888-219-WOOD

Ph: (888) 401-6367 x701 .......................................................... 423-698-0284 Corley Mfg .......................................................7 CW Mill ............................................................8, 47 ..............................................800-743-3491 Ferntree Equipment & Distribution ...........11 ..................................................778-222-9111 F&R Mfg. ..........................................................23 ..................................................800-355-1250 GoFast Manufacturing ..................................18 ..................................................800-854-7439 Great Lakes Mfg. ............................................26 ..................................................877-248-5677 Holtec ...............................................................3 ......................................................holtecusa.com

‘95 John Deere C6 Tree Farmer James G. Murphy Co. ....................................25 ..................................................425-486-1246 Hurdle Machine Works Inc ..........................48 ..................................................901-877-6251 Hurst Boiler. ....................................................14 ..................................................877-774-8778

Item ID: 13920 Kilgore Saw Company ...................................20 ..................................................888-857-5153

‘13 KMC 2500 Track Skidder Menominee Saw.............................................29 ..................................................800-582-0470 Lignomat ..........................................................24 ..................................................800-227-2105 Contact: Austin

Lumbermens....................................................42, 45 ...........................................888-401-6367 Ph: (888) 401-6367 x703

Item ID: 14078 Metal Detectors, Inc......................................26 ..................................................541-345-7454

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Contact: Austin Midwest Sharpening ................. ...................27 ..................................................231-924-5953

capacity!. Item ID 13421. Sam x702

Ph:tek (888) Multi North401-6367 America LLC x703 .......................12 ..................................................800-243-5438

BARKO

Northeast Implement, Inc. ...........................22 ..................................................607-589-6160

1994 Barko 160B - Electric Pantron Automation, Inc. .............................46 ..................................................800-211-9468 off onto a conveyor.

This is a very ..................................................888-38-TREES knuckleboom, 30' boom, 75hp Paul Bunyan Show, The ................................13

Piper’s Saw Shop.......................... ..................8 well built processor. Item ID 13820. .....................................................800-845-6075 motor, Rotobec continuous

Rawlings Wood Hogs ....................................6, 10 ..............................................866-762-9327

Sam x702

grapple, 5,000 original hours.

Row Electric.....................................................27 ..................................................800-248-4479

Firewood Processor - This is

(excellent condition.). Item ID

Ryan's Equipment...........................................10 ..................................................989-427-2829

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 403

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Forestry Model Equipment 16 PDA ..............17 ..................................................717-793-3102 13238. Chris x700 Scandinavian

Smith Sawmillfirewood Service ...................................2 .....................................................800-598-6344 automatice processor 1995 Barko 775 B Feller Buncher

Tajfun USA .......................................................1 with John Deere power unit with .....................................................800-634-5557 - Pumps recently redone. 400 hrs Universal Refiners ..........................................21 ..................................................800-277-8068

low hours. Control panel includes

on injection pump. always started

PLEASE PRINT amp gauges.

Cuts logs up to 16”.

SEPTEMBER 2021 kohing head. head works great.

Woodlandia .....................................................16 ..................................................877-508-8777

tach, oil pressure, water temp and

good. in good working order. 22in

you to Change your Address One If owner andneed comes with all Item ID 13185.

Sam x702 or

Addand Your Name to our1999 mailing list, manuals receipts.

Purchased Barko 160D - newthen engine with please complete this form and mail to:

new for $32,500. Item ID 13865.

Sam x702

approximately 1500 hours. Hour

Lumbermens™meter Magazine dont work. The last 2 owners 1116 W 7th St., Ste. 297 EQUIPMENT have only used it to load trucks or Columbia, TN 38402

LOGGING BANDIT

Handles logs up to 32”. Uses

as a backup as needed. Has a CTR ❑ Please Add ❑ Please Change ❑ grapple Pleasehas Remove 1999 Bandit 1900 Tracked Disc delimber, been rebuilt.

but electronic option is available.

50% or better. 475 hp Cummins Item ID 13694. Sam x702 Company Name*: ________________________________________________________

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under at required Boom have minor leaks. *Company nameCarriage and address to cylinders process your change.

Diesel. 7500 Hours. One owner.

94 Barko 275 - Excellent value

Individual Name: _________________________________________________________

Well maintained. Item ID 13294.

with low at hours at 3,500. 5.9

Address:________________________________________________________________

Sam x702

CUMMINS continuous grapple.

_______________________________________________________________________

2004 Bandit Beast Model 4680 -

Runs Great!. Item ID 13740. Sam

City: ___________________________________________________________________ 3412 Caterpillar Diesel engine x702 State: __________________________________________________________________ with 850 HP. 5300 hrs. Mill in BELL Zip:____________________________________________________________________ good condition. Just finished 10 1990 Bell Super T - This Bell has

Acre clearing job, ready to work! a brand new Duetz engine. Lever Phone: _________________________________________________________________

Remote control. Big production control, 33” bar, pump and tranny Email:__________________________________________________________________

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 47

LUMBERMENS™ MAGAZINE 1116 West 7th Street, Suite 297 Columbia, Tennessee 38401

PRSRT STD. U.S. Postage PAID Permit No. 212 Pulaski, TN