Lumbermens September 2020 Magazine

LUMBERMENS BIG INTERNET GIVEAWAY VALUED AT $10,000 - SEE AD ON PG. 3 September 2020 TM

pg.18 >>

FORESTRY EQUIPMENT MANUFACTURER

www.omef-northamerica.com

BOLT ON ADAPTER BLADES TO SUIT YOUR MOUNTING BRACKETS PROTECTED HYDRAULIC PIPES XAR500 STEEL GRAB

POWERFUL HD CYLINDER

8 inch (3.5 to 6 ton) 12 inch (6 to 16 ton) 16 inch (16 to 22 ton) 20 inch (22 to 35 ton)

XAR500 STEEL INTEGRATED BLADE SOLID FULL BODY DESIGN

STRUCTURE COMPLETELY IN XAR400 STEEL

(778) 222-9111 FERNTREE EQUIPMENT & DISTRIBUTION • info@ferntree.ca

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘93 Barko 180B

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

Grapple Assist for crooked logs

2019 Cord King Line-up

Email: info@cordking.ca Web: www.cordking.ca

‘95 John Deere C6 Tree Farmer

Item ID: 13920 TOLL FREE 1-888-219-WOOD Contact: Austin ‘13 KMC 2500 Track (9663)

Ph: (888) 401-6367 x703

Skidder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is a Chomper Model 16 PDA

‘05 Gehl CTL 70Wedge and automatice firewood processor • splitter

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

Item ID: JW-986495 John Deere power unit with design towith suit your Contact: J Williams low hours. Control panel includes needs Ph: (888) 401-6367 x701

tach, oil pressure, water temp and 24 to 72 ton splitting amp gauges.

Cuts logs up to 16”. capability chain conveyer, 8 way Onesplitting owner and comes with all • splitter, The on fastest 20,000lb goose neck trailer.

Item ID manuals and receipts. Purchased cycle time on the 13916. Austin x703 planet. new for $32,500. Item ID 13865.

•

Best Value Portable Log Splitter

Sam x702

Facts to consider:

- Small manufacturer in PA has

made the best valued log splitter.

LOGGING EQUIPMENT BANDIT

quality chips with patented ‘Cone’ Handles logs first up to 32”.

Uses 1999 Bandit 1900 Tracked Disc 1. Pioneered N. America’s commercial firewood processor drum design. Can easily load 42’

13HP Honda motor. Manual start

Chipper - Cat Under Carriage at

day. Item ID 13882. Austin x703

Has Log Lift. Uses 4-way wedge

Diesel. 7500 Hours. One owner.

Brewco Saws - Two Brewco Saws

Value! PA. Item ID 12062. Sam x702

Sam x702

3 Bar models M1820, vans and2. produce 6 - 8saw loads per but available electronic option is available.M2030 50% orand better.M2430 475 hp Cummins

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. in the mid 70’s Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

3. 7 Slasher Model 40, 44, 44HO, 48, 54 with & 60 EDGERS & GANGS Saw Models adjustable Available to single two way.

Great 36, Well maintained.

Item ID 13294. low at hours at 3,500. 5.9

CUMMINS continuous grapple.

4. The Most productive machine on the planet, proven and guaranteed

in excellent condition. Runs great.

Item ID 13644.

Samto x702 5. Go our

Firewood Processor - This is a

2004 Bandit Beast Model 4680 -

Runs Great!. Item ID 13740. Sam

3412 Caterpillar engine homemade processor with a video 10’ x702 web site for live action and detailsDiesel www.cordking.ca FIREWOOD PROCESSORS log deck. Has a hydraulic grapple, with 850 HP. 5300 hrs. Mill in BELL 6.

Available with single joystick control 2010 Shop Built Wood Processor chain and kicker that all runs off good condition. Just finished 10 1990 Bell Super T - This Bell has - It has a 353 Detroit diesel, 40

of a 4 cylinder Mercedes power

Acre clearing job, ready to work!

a brand new Duetz engine. Lever

7. Exclusive lifetime splitter warranty and Remote 1 year bumper to bumper warranty. inch insert tooth circle saw, 30 foot control. Big production control, 33” bar, pump and tranny unit. Has a 4’ chain saw that kicks  Issue 364 391

Lumbermens™  since 1986

❘

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

PUBLISHER

MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR John Williams (888) 401-6367 ext. 701 j@lumbermens.co

EQUIPMENT REPS

MAILING ADDRESS

machine, with air strain conveyers be missed. Enter to win one of the most that go up and down, with airbags, innovative MID-ATLANTIC LOGGING &portable BIOMASS sawmill in the world to it includes two sets of Mcdonough Fri, 15 Sept - Sat, 16 Sept produce beautiful wide live edge slabs for pressure guides. Top Casting wheel Selma, North Carolina tabletops, counters, benches and more. www.midatlantic-logging-biomass­ is supported on both sides. This

expo.com/

is an extremely n GIVEAWAY PRIZE accurate machine in ve1y good condition, Cuts 130 KENTUCKY WOODTotal EXPO value $10,000 USD a minute also has CLT presses.

Fri, 15 HOB-3M Sept - Sat,Hobby 16 Sept Warrior feet Multi-Purpose SwingItem ID 13876. Austin x703 Lexington, Kentucky Blade Sawmill + Planer Blade http://www.kfia.org/ S & W 125 Band Mill with

Caterpillar generator - Low hours n BONUS on the mill, electronic computer Set THE PAULLumbermens BUNYAN SHOW Printed Magazine 1-Year works,1 or 2" band, 22ft. track Fri, 6 Subscription, Oct - Sun, 8 Oct yours free as a1/2" thank you for Cat 3406 140KW Genset, 12,400 Cambridge, Ohio www.ohioforest.org participating.

Donna Heninger

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

10 hours on this machine since it has been rebuilt, it has a 24foot in

KentuckyWoodExpo.aspx

DESIGN DIRECTOR Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Danckaert Band Resaw - Roughly

Escanaba, Michigan

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

BANDMILLS & HEADSAWS

feed(est. deck 201986) foot out has feed deck Lumbermensco.com 72ND ANNUAL GREAT LAKES with 44 inch wheels, and all the LOGGING & HEAVY EQUIPMENT EXPOTurboSawmillUSA.com partnered up with Thurs, 7 Sept Sat, 9 Sept bells and whistles,not its a production for another generous giveaway to

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

hours ready to run. Item ID 13434.

Sam x702 REGISTER

n CARRIAGES & DRIVES Enter Today by Scanning the QR Code with 2010 Cardinal HD Carriage Phone Camera or visit Lumbermensco.com

** INFO LINK**

Carriages (Sawmill) - Cardinal

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

Winner will be announced on

Sept 21, STACKING 2020.

RAC

Empire Hydraulics ................... 8

The prize will be airfreight to the winner.

Collection is at the winner's nearest Sawmill Exchange .................. 11 international airport.

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

Giveaway is ................................ open to all US residents over. By entering this giveaway www.BakerProducts.net WoodMizer l age 18 and you agree for your details/asnwers to be shared with the organiser and its 800.S48.6914 I S73.663.7711

Dyna Products ........................ 35

May 21-22, 2021 • www.exporichmond.com

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

TERMS:

GOOD LUCK EVERYONE!

sponsor - you may unsubscribe anytime. Winners of prizes must complete prize

own taxes. ❘ L!  SELL YOUR EQUIPMENTvalidation TODAY and ❘ are liable 24/7for SUPPORT  (888) 401-MENS 401-MENS l§ TODAY 0 SUPPORT

NO. 3

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID

13238. Chris x700 Field Proven Design for the Independent Hardwood Sawmill ‘05 Gehl CTL 70 a Chomper Model 16 PDA

automatice firewood processor

1995 Barko 775 B Feller Buncher

Item ID: JW-986495 • Corley lnfeed and Edger with Lewis Optimization proven with John Deere power unit with - Two - Pumps recently redone. 400 hrs Contact: J Williams on injection pump. always started low hours. Control panel includes Ph: (888) 401-6367 x701 names with proven results tach, oil pressure, water temp and good. in good working order. 22in ‘83 John Deere kohing head. head works great. amp gauges. Cuts logs up to 16”.

• True Hardwoodchain Optimization 4850 Item ID 13185. Sam x702 conveyer, 8 way splitter, on One owner and comes with all Item ID: 14073 20,000lb goose neck trailer.

Item ID manuals and receipts.

Purchased 1999 Barko 160D - new engine with • Small Contact: Austinfootprint that fits inside most existing mills new for $32,500. Item ID 13865. approximately 1500 hours. Hour 13916. Austin x703 Ph: (888) 401-6367 x703 • Value priced with all of the optimization capability of more Best Value Portable Log Splitter meter dont work. The last 2 owners Sam x702 with 1700 hours, in very good - Small manufacturer in PA has LOGGING EQUIPMENT have only used it to load trucks or elaborate high speed Edger Optimizers BANDIT condition. Easily produces high made the best valued log splitter. as a backup as needed. Has a CTR

For more information on our new "M" Series Edger and other Corley and Lewis products, give us a call.

EDGERS & GANGS LEWIS CONTROLS CORLEY SAWMILL OPTIMIZATION MACHINERY

quality chips with patented ‘Cone’

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

delimber, grapple has been rebuilt.

vans and produce 6 - 8 loads per

but electronic option is available.

50% or better. 475 hp Cummins

Item ID 13694. Sam x702

drum design. Can easily load 42’ day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

Chattanooga, Tennessee FIREWOOD PROCESSORS log deck. Has a hydraulic grapple,

2010 Shop Built Wood Processor

chain and kicker that all runs off Phone 423-698-0284 of a 4 cylinder Mercedes power

- It has a 353 Detroit diesel, 40

unit. Has a 4’ chain saw that kicks www.corleymfg.com

inch insert tooth circle saw, 30 foot  Issue 364 391

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine

Boom cylinders have minor leaks.

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

Cornelius, with 850 HP. 5300 hrs.

Mill in good condition. Just finished 10

Oregon BELL

1990 Bell Super T - This Bell has

Phone 503-648-9119 a brand new Duetz engine. Lever

Acre clearing job, ready to work!

control, 33” bar, pump and tranny www.lewiscontrols.com

Remote control. Big production

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

PleAse PrINt

blades and 1 spare 36" blade),

❑ Please Remove

** CALENDAR**

where to order included. Item ID 12846. Sam x702

Zip

cuts from sawline, log stop and

loader to drop logs onto carriage,

Precision 58 Chip Pac - Single chute

stop and loader to deal with big

Sam x702

loading system,. Item ID 12764.

heavy duty log turner under log logs onto carriage and track and

State

frame. Significant new spare parts

to be negotiated separately. Item ID

Email

TM

FOR CLASSIFIEDS CHIPPERS Call 888.401.MENS LIST SELL EXCHANGE BUY SAVE EST 1986 See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at of Boonville, New York www.LumberMB\ISmagazine.com DealS the Month belted rollcase to clear slabs and

13198. Sam x702

Manual Four Head Block - Manual www.starwebhosting.net/woodsmen/

From TA ApriL BLE

DEPARTMENTS The Tree that Started it All!

Trelan Chipper - This is a remote

chipper that has been totally rebuilt with about 840 hours except for the V-12 Caterpillar power unit. New

OF C O N T E NBANDMILLS T S & HEADSAWS FOREST PRODUCTS EXPO Four Head Block Mounted on

clutches, disc, bearing, liners and

custom chute. 23” in opening and V-12 Cat with 750-800 hp rating.

all steel carriage. Husk. Manual

'12 WoodmIzer LT 40 SOUTHWEST

City

❑ Please Change

Pulleys on Bearing . Parts Book and

short pop-up transfer to edger,

Danckaert Band Resaw - Roughly

Fri, 25 August - Sat, 26 August

EquipmEnt REpREsEntativEs

EST on this 1986 10 hours machine since it Hot Springs, Arkansas cAll uS todAy foR All youR uSed www.arkloggers.com equiPMent hasneedS! been rebuilt, it has a 24foot in

Lumbermens Big Internet

❑ Please add

feed deck 20 foot out feed deck 72ND ANNUAL GREAT LAKES fREE EquipmEnt listings!

Call –E L I S T with S E L44 L inch E X C Hwheels, ANGE B and UY S A Vthe all Since 1986, Lumbermens has LOGGING & HEAVY EQUIPMENT EXPO 401-6367 (888) published a monthly circular ..................................... 3Thurs, 7 Sept - Sat, 9 Sept bells and whistles, its a production wwwGive-A-Way. Individual Name

Company Name*

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

LIST

SELL

EXCHANGE

item id: 14061 contact: Austin x703

EST

Escanaba, BUY SMichigan AVE

Morris Woods

1986

Phone

Address

AD Sales MID-ATLANTIC LOGGING & BIOMASS Deals of the Month.................................

18 2012 JoHn deere

548G3

PUBLISHER

401-6367 Fri, 15 Sept - Sat,(888) 16 Sept

Selma, North CarolinaExt. 704 www.midatlantic-logging-biomass­ morris@lumbermensco.com Ad ADVERTISING Directory...........................................

38 MID-ATLANTIC SALES expo.com/ LOGGING & BIOMASS EXPO

*Company name and address required to process your change.

If you need to Change your Address or Add Your Name to our mailing list, then please complete this form and mail to:

Woods Publishing

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR

P.O. Box 1916 Columbia, TN 38402

Lumbermens Magazine

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Reduced PRice item id: 14021 contact: Sam x702

FAbTeK 344b

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

✁

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

item id: 14061 contact: J Williams x701

chris Woods Phone: (888) 401-6367 ext. 700 chris@lumbermens.co

Will Lexington, Kentucky http://www.kfia.org/ Keene KentuckyWoodExpo.aspx (661) 900-7726

THE PAUL Will@lumbermensco.com BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

sawmilling, palletADDRESS manufacturing, and secondary wood manufacturing MAILING industry, is free within qualifying manufacturers B & to B Mfg . ...............................

18 P.O. Box 1916the United States andColumbia, industry suppliers.

Please limit your subscription to one free copy TN 38402-1916 B. H. Payne .............................. 16 per company mill location.

(888)or401-6367

Baker ......................................

5, 7 CHANGE ADDRESS: Send address changes to Lumbermens™ AD OF SUBMISSIONS Magazine, W. to­ 7th St., Ste. 297, Columbia, TN 38401. When May1116 be sent Bell's Machining ..................... 27 possible, please include an old address label. morris@lumbermens.co Brute Force Mfg. ..................... 31 REPRODUCTION AND RESPONSIBILITY: Advertisers are responsible POSTMASTER for Send the contents claims to: of their advertising.

Lumbermens™ Buck Equipment (AIM)accepts ........ 36 addressand changes no responsibility their claims. No part of this publication may be Lumberman'sforExchange Corley 32 reproduced orBox transmitted in any form or byMfg any.............................. means, electronic P.O. 1916 or mechanical, including photocopying, recording or any information Columbia, TN 38402 CRD Metalworks .................... 25 storage retrieval system, without permission of Lumbermens™.

The Lumberman's Exchange Mill-ArmorHog ..............in 17 Negatives, artwork, and isother itemsCW submitted for publication published monthly Woods Lumbermens™ arebythe property of advertiserQs. Lumbermens ™ owns CW Mill-Hogzilla ................... 15 Publishing, P.O. Box 1916, material typeset and/or designed by Lumbermens ™ and reserves the Columbia, TN 38402. All rights right to its use outside of Lumbermens™.

Lumbermens™ will exercise Dyna Products ........................

35 reserved. All editorial/ advertorial every precaution in at writing, designing, and printing material contained submissions are used the Empire Hydraulics ...................

8 within.

We not be liable for omissions or typographical errors. discretion of shall the publisher and may be edited for purposes of clarity Great Lakes Mfg. .................... 34 and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

Cambridge, Ohio www.ohioforest.org

Austin Woods Phone: (888) 401-6367 ext. 703 austin@lumbermens.co

Walker Woods

** INFO LINK**

Austin Woods  Issue 364 lumbermenS  Since 1986 ❘  liSt  Sell  (888) 401-6367 ext. 703 austin@lumbermens.co SUBSCRIPTION: Lumbermens™, a trade newspaper for the logging,

(888) 401-6367

exchange  buY  Save

❘

Ext. 707

walker@lumbermensco.com

M&F Gauge ............................. 28 Meadows Mill, Inc. ................ 33 Menominee Saw ..................... 29

it(888) includes401-6367 two sets of Mcdonough

pressure guides. Top Casting wheel Ext. 700 ischris@lumbermensco.com supported on both sides. This

is an extremely accurate machine Morris Woods, Ad Sales

Ted Schultz

morris@lumbermens.co feet a minute also has CLT presses.

Austin Woods Item ID 13876.

Austin x703 S (888) & W 125401-6367 Band Mill with

Caterpillar generator - Low hours Ext. 703

on the mill, electronic computer Set austin@lumbermensco.com

works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam Wall

Phone: (888) 401-6367 Sam Joex702 Ferrazzano ext.

702

CARRIAGES & DRIVES (888) 401-6367

sam@lumbermens.co

2010 Cardinal HD Carriage

 lumbermenSmagazine.com

Ext. 709

Carriages (Sawmill) - Cardinal joe@lumbermensco.com

Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, Sam Wall

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Midwest Sharpening.............. 26

carriage knees, husk including

(888) 401-6367 Ext. 701

Morbark ..................................... 9

teds@lumbermensco.com

(888) 401-6367 Ext. 702

48" bottom saw and 36" top saw sam@lumbermensco.com

STACKING The Tree that Started RACit All!

Multitek ................................... 12

Piper's Saw Shop.................... 13

Rotochopper............................ 40

Row Electric ............................ 20

Since 1986, Lumbermens™ has published a monthly Sawmill Exchange ..................

11 circular reaching sawmills, loggers, pallet makers, Select Sawmill .........................

19 industrial woodworking plants recyclers and worldwide.

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

PUBLISHER The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union GroveTed Saw & Knife.. 2, 37 Monnin

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

1116 W. 7th St.,................................

Ste. 297 • Columbia, TN 38401 WoodMizer l

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Chris Woods

that go up and down, with airbags,

Phone: (888) 401-6367 in ve1y good condition, Cuts 130 ext. 704

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

For classifieds Call toDay (888) 401-6367

machine, with air strain conveyers

Woods Publishing

DESIGN DIRECTOR

MAILING ADDRESS

 SELL YOUR EQUIPMENT TODAY TODAY l§

(888) 401-6367

❘

 24/7 SUPPORT 0 SUPPORT

AD SUBMISSIONS May be sent to— morris@lumbermensco.com POSTMASTER Send address changes to: Lumbermens™ Magazine www.BakerProducts.net 1116 W. 7th St., Ste. 297 • Columbia, TN 38401

800.S48.6914 I S73.663.7711

❘ L!  (888) 401-MENS 401-MENS

NO. 5

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

Schutte Hammermill Grinder

‘93 Barko 180B ‘01 ItemBenson ID: 14077 34’ End Contact: Austin Dump Ph: (888) 401-6367 x703 Item ID: 13818 Contact: Sam (888) 401-6367 Ext. 603

Item ID: 13965 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703 2013 Caterpillar

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

535C

Item 13868 This is a very off ontoID: a conveyor.

Contact: Sam Ph: (888) 401-6367 x702

well built processor. Item ID 13820.

If you recognize this…

‘05 Gehl CTL 70

John Deere 640 ‘83 JohnSkidder Deere Grapple

Item# 485013848 Contact: Sam Item ID: 14073 Ph: (888) 401-6367 x702 Contact: Austin Ph: (888) 401-6367 x703 1996 Timbco T425B FB w/2008 with 1700Intermittent hours, in very good Rotosaw Saw Head.

condition.has Easily produces high Machine 540 degree non quality chips with patented ‘Cone’ continuous rotation on upper.

9900 drum design.

Can easily load 42’ hours.

New Undercarriage.

New vans and produce 6 - 8 loads per glass in cab.

Very good running

day. Item ID 13882. Austin condition.

Rotosaw has 360x703 degree

& 6CT8.3 GANGSengine rotation.EDGERS Cummins Brewco Saws Two Brewco Saws with 215 HP. Machine runs great.

in excellent condition.

Runs great.

Working in select hardwood today.

Item ID ID 13548.

13644. Sam Sam x702 x702 Item

PROCESSORS 1997FIREWOOD Timbco 820C Clam Bunk

Item ID: JW-986495 Contact: J Williams ‘15 Cord King M44 Ph: (888) 401-6367 x701 Item ID: 13961 Contact: Austin Ph: (888) 401-6367 x703

you need one of these.

Firewood - This tracks likeProcessor new he will addisfor a Chomper Model 16 PDA additional $20,000. Item ID 13494.

automatice Sam x702 firewood processor with John Deere powerForwarder unit with 1999 Timbco TF-820D

low hrs hours.

Control panel includes 11k on machine, new Cummins tach, oilatpressure, water temphas and engine around 8k hrs and

chain conveyer, 8 way splitter, on

amp gauges.

Cuts & logs uppump. to 16”. fresh drive pump imp.

One26 owner 28L tires and somecomes great,with someall

13916. Austin computer andx703 Scorpion controls, Best Value Portable Splitter added speed control.Log 2 sets of

Samthere. x702 the bucket is sloppy and

20,000lb goose neck trailer. Item ID

- Small, manufacturer PA has in tracks all new Lexan.inLocated made theCanada. best valued log splitter.

Alberta, Customer will

manualsMachine and receipts.

Purchased decent. is ready to work, new for $32,500.

Item ID 13865. but could use a little fixing here

couldLOGGING stand to beEQUIPMENT pinned and BANDIT bushed.

No major Item ID fix it again, issues!. get the

Don’t just 1999 Bandit 1900 Tracked Disc 13212.

Sam x702 permanent solution!

Chipper - Cat415D Under Carriage at 2000 Timbco w/2005 Fabtek

Handles logs up to 32”.US Uses pay shipping to closest entry 13HP Honda motor.

Manual start point. Item ID 13532. Sam x702

but electronic option is available.

1998 Timberline Stroke Delimber Has Log Lift.

Uses 4-way wedge 8400 hours. U/C at 60%. Will crank

adjustable to single two way.

Great and run. Owner retired.

Machine Value!

PA. Item ID 12062.

Sam x702 idle for past year. Item ID 13599.

Firewood Sam x702 Processor - This is a homemade with a 10’ 1999 Timbcoprocessor 820D Clam Bunk

log deck. Has a hydraulic Forwarder - 10,300 hours. grapple, New chain and kicker that all runs off engine less than 500 hours ago.

www.prolenc.com of a 4 cylinder Mercedes power

2010 Shop Built Wood Processor Forwarder - “4000” original hours.

-20.3 It has a 353 Detroit diesel, 40 x 25 rubber at 70%. Hand

Sam x702

50% or better.

475 hp Cummins 4-Roller Processor - 21,000 hours Diesel.

7500 Hours.

One owner. on meter. New JD 6 cylinder Well maintained.

13294. engine in 2011 hasItem 7000ID hours.

Sam x702 U/C at 65%. Extensively rebuilt

2004 Bandit Beastmotor, Modelnew 4680 with new swing charge 3412 Caterpillar pump, new highDiesel speed engine saw motor,

with main 850 HP. 5300 hrs.

Mill in new hydraulic pump, new oil good condition.

Just finished 10 cooler, all main cylinders repacked.

Item ID: 14007 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B swing motor.

Has- Electric new jet fit knuckleboom, 30' boom, 75hp system.

This machine is loaded...

motor, Rotobec continuous has pro-heat system for cold grapple, start.

5,000 Has original hours. weather fire suppression (excellent Item ID system.

Allcondition.). working! Hydraulic 13238.

Chris x700 Oil just totally changed (100 new

1995 Barko 775 B Feller gallons) with new filters.Buncher Item ID -13598.

Pumps recently redone.

400 hrs Sam x702

on injection alwaysBar started 2000 Timbcopump.

425D w/33" Saw good. in working order.540 22in Head.

40good degree tilt on head. kohing rotation head. head works body. great. degree on upper Item year ID 13185.

Sam x7026CT8.3 One old Cummins

1999 Barko 160D pumps.

- new engine with engine.

Resealed Rebuilt approximately hours. Hour valve bank. 90%1500 undercarriage.

meter dont hot work.

The last 2 owners Can accept saw.

Fire have only used it to load trucksoil or suppression system. Auxiliary as a backup needed.machine.

Has a CTR cooler.

Goodas running delimber, grapple has been Item ID 13549. Sam x702 rebuilt.

1500 Model BoomTimbco cylinders have minorengine leaks.

2000 445D - Recent Itempump ID 13694. x702 and last Sam winter.

New

94 Barko 275 Excellent sprockets and- rollers.

22”value quadco with low at hours at 3,500.

5.9 in hot saw. Owner retired. Located

CUMMINS continuous Montana.

Item ID 13790.grapple.

Sam x702 Runs Great!.

Item ID 13740.

Sam 2005 TimberPro 830TF Forwarder

-x702 6580 hours. Very good condition.

BELL 710/45-26 Tracks for all bogies.

1990 at Bell Super T - This Bell has tires 70%.

Includes bolsters

Call 877.563.8899 250.563.8899 inch insert circle saw, new 30 foot Remote control.screen, Big production unit. Has or a 4’ chain extra computer and extra sanded andtooth painted, brand machine.

Owner hassaw twothat setskicks of

a brand engine.

Lever and backnew rest.Duetz Comes with 36” control, 33” pumpsaw andoption. tranny grapple withbar, grapple

 Issue Issue 364 364 391 

 LumbermensCO.com  ❘ Lumbermensmagazine.com

Can accept bunks, but none with

Acre clearing job, extra readyfinal to work!

Package includes drive,

Item ID: 13920 Mag 64-knive Contact: Austin Source Grinder Ph: (888) 401-6367 x703

Lumbermens™since since1986 1986 ❘ ❘    seLL exchange  save ❘ Lumbermens ListList  seLL   exchange  buybuy  save

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 7

40

used

or a

02

00

t

02

r

y

wer

w

ill

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

5 7 0 6 • 5 4 8 • 800

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

Promotional Pricing Offer

Simonds Red Streak Hard BackCTL 70 ‘05 Gehl 1-1/4” x .042 x 3/4” or 7/8” Item ID: JW-986495 L im it e d Length 13’2”Contact: J Williams Ph: (888) 401-6367T x701 im e

each

O n ly

Tell us you saw it here! chain conveyer, 8 way splitter, on

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

22X380, direct drive, EROPS,

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 Issue 364 1986 391 Lumbermens List exchange itbuy  to save arch with winch.

Low hours on ™  since Cat D5B Dozer❘ - Cat D5B s/n seLL  come hook up to and go your this skidder at only 3700. These

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer

PIPER’S Saw Shop

‘83 John Deere $14.27 4850 $14.71

‘93 Barko 180B

job site and put it to work to up

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

UNIVERSAL REFINER NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

C

The Tree that Started it All!

O

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

R

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

P

Hot Springs, Arkansas www.arkloggers.com

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept MID-ATLANTIC

LOGGING & BIOMASS EXPO

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

has been rebuilt, it has a 24foot in

O

N

with 44 inch wheels, and all the

Thurs, 7 Sept - Sat, 9 Sept

MARKETING DIRECTOR

10 hours on this machine since it feed deck 20 foot out feed deck

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

72ND ANNUAL GREAT LAKES O LOGGING R& HEAVY A T I EQUIPMENT EXPO

PUBLISHER

ADVERTISING SALES

BANDMILLS & HEADSAWS

bells and whistles, its a production

machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours

TheDESIGN H.A.W.G. is unbelievably simple, durable The R-MAG is a portable wood wastecomputer grinder on the mill, electronic Set DIRECTOR THE PAUL BUNYAN SHOW Donna Heninger and fast, yet it will grind almost anything and Fri,that can be used in many areas of recycling. works,1 1/2" or 2" band, 22ft. track 6 Oct - Sun, 8 Oct Catgrind 3406 140KW Genset, 12,400 Cambridge, EQUIPMENT REPS product in just one pass... make a finished They canOhio easily and safely lawn clippings, Sam Wall www.ohioforest.org hours ready to run. Item ID 13434. even chips.

Is ideal for grinding: Asphalt, leaves, land clearing, construction/demolition (888) pulp 401-6367 ext. 702 Sam x702 sam@lumbermens.co Shingles, Construction Waste, Green Waste, waste logging slash, stumps, log yard waste, CARRIAGES & DRIVES Austin Woods Stumps, Difficult/Dirty Material, Tropical railroad ties, storm waste, tropical (palm and 2010 Cardinal HD Carriage (888) 401-6367 ext. 703 austin@lumbermens.co Waste (Palm & Palmetto), etc. palmetto) waste etc.

Carriages (Sawmill) - Cardinal

** INFO LINK**

MAILING ADDRESS

Carriage line it includes carriage

800-277-8068 B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

UNIVERSAL REFINER The Paul Bunyan Show ......... 39 Machinery ...................... 3 Grinders/Shredders TheHahn BEST Industrial Hurst Industrial ..... 10 onBoiler the.............................

Planet 14forThomas over 35Controls years.

P . O . B O X 1Lignomat 5 1 .................................

• M O24 NWoodMizer T E S................................

A N O ,l Wwww.BakerProducts.net A 98563 800.S48.6914 I S73.663.7711

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 9

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

30+ Years Strong!

‘16 Halverson H140 Skidsteer (DEMO) From Price To Performance, We’re A Cord Above The Rest!

NEW

Auto Saw Tensioner

Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

Portable • DePenDable • low Maintenance

888-SPLITTER (888-775-4883)

blockbuster-inc.com

100

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

20

Ite Co Ph

 Firewood Processors: 8 Models  Firewood Cleaners  Firewood Conveyors: 12’, 20’ & 30’  Operator’s Cabs  Firewood & Log Grapples  Free DVD

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606 319-986-5525 Local • 2756 Kentucky Ave, Mt Pleasant, IA

‘93 Barko 180B

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703 off onto a conveyor. This is a very

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp

WWW.TREETRADER.COM ~ The World’s Largest For The Tree & Landscape Industry wellWebsite built processor.

Item ID 13820. motor, Rotobec continuous Sam x702

grapple, 5,000 original hours.

a Chomper Model 16 PDA

13238. Chris x700

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 391

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

13HP Honda motor. Manual start but electronic option is available.

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and

2000 W900 KW w/ amp gauges.

Cuts logs up to 16”.

Rotobec One owner and MT27 comes with all manuals and receipts.

Heavy Spec Purchased new for $32,500. Item ID 13865.

Item ID: 13993 Sam x702 Austin Contact: EQUIPMENT Ph: LOGGING (888) 401-6367 x703

BANDIT

hours on this1900 machine, in Disc excellent 1999 Bandit Tracked condition.

ItemUnder ID 13937.

Austin Chipper - Cat Carriage at x703 50% or better. 475 hp Cummins

Value! PA. Item ID 12062. Sam x702

Diesel. 7500 LIEBHERR Hours. One owner.

2007 Liebherr A924C Handler Well maintained.

ItemLog ID 13294.

Rubber Tired Log Loader. 13,000 Sam x702

homemade processor with a 10’

boom.

60” Log Grapple with 3412 Caterpillar Diesel engine

Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great Firewood Processor - This is a

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

hours.

40’ Reach two4680 section 2004 Bandit Beastwith Model continuous Fixed with 850 HP.rotation.

5300 hrs.

Mill Cab in

(excellent condition.). Item ID 1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

‘04 CAT 953C Frontend Loader kohing head. head works great.

2011

Item 13854 Item IDID: 13185.

Sam x702

Contact: Sam 1999 Barko 160D - new engine with Ph: (888) 401-6367 x702

eng

11,2

approximately 1500 hours. Hour

meter dont work. The last 2 owners trailer.

4-Wheel andtrucks steering. have only used itdrive to load or

Top Quality as machine. be as a backup needed.Would Has a CTR great for log yard or work. delimber, grapple hasmill been rebuilt.

Item ID 13476. Sam Boom cylinders havex702 minor leaks.

2011 Liebherr A904 Rubber Tired Item ID 13694. Sam x702 Log Handler. cylinder 94 Barko 275 -Liebherr Excellent4value engine with great fuel economy. with low at hours at 3,500. 5.9

11,230 hours.

Fixed cab grapple. riser. Two CUMMINS continuous section boomItem withID 38’13740. reach.Sam Cab Runs Great!. protection. 4-Wheel drive and x702 steer. Can pull loaded BELL trailer.

Cleaned, serviced 1990 Bell Super T -and Thisinspected.

Bell has

Remote control.

Bigand production Cleaned, Serviced, Checked

control, bar, pumpMD. and Item tranny Located33” in Baltimore, ID

out for service. Can pull loaded  List  seLL  exchange  buy  save  Issue 364

On Ite Co Ph

good. in good working order. 22in

on injection pump. always started

Riser cab guard protection. good with condition.

Just finished 10

Acre clearing job, ready to work!

Front push blade.

Tight and dry.

‘14 Lo

aTight brand new engine. and dryDuetz and ready forLever work.

13477. Sam x702 ❘  LumbermensCO.com

Lumbermens  since 1986

❘

Log

sect

pro

stee

trai

insp for

MD

1997

Pier

on 6

Goo

just

deli

1987

MO

 List  seLL  exch

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 11

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

IntegrIty • PrecIsIon • QualIty • Value “Precision Under Pressure”

FireWOOD/WaSteWOOD

Woodmaster See why we are your BeSt Source for bandsaw blades!

We offer the highest quality welds and our people use the highest level of integrity and precision to give you the best bandsaw blades in the business—we ship all over the US. Satisfaction always guaranteed!

thIn Kerf Band saw Blades Ask About Our Dismanteling Blades 13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

1-888-857-5153 ck Cheut Our O

Shrink Wrap

Quality • Our Service • Our Price

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

Item ID: 14077 Contact: Austin 84/85 Deere Ph: (888)John 401-6367 x703

‘97 T 360

440B/C

Item Cont Ph: (8

Item ID: 13908 Contact: Sam Ph: (888) 401-6367 x702

Sell Your WOOD Wood-Mizer LT40 – $300/cord or More!

Item DoubleID:or13995 triple your profits by shrink wrapping wastewood - foreContact: Austin wood(888) with401-6367 WOOD-PAKer! Ph: x703Attractive various size packages can be

obtained with our high production, easily operated and affordable ‘95ideal John Deere C6 machines. Eight machines available. The equipment for producTree Farmer ing square bundles-palletizable for ease in storage and transporting.

Item ID: 13920 Inquire for free details. Video and Package samples at nominal fee.

Contact: Austin ‘13 KMC 2500 Track Ph: (888) 401-6367 x703 Skidder B & B Manufacturing • 3007 West River Road • Olean, NY 14760 Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

John

‘90 Bell Super T Toll Free 1-800-654-5320 BARKO Item ID: 13896

capacity!. Item ID 13421. Sam x702

E-mail: bbmfg@verizon.net 1994 •Contact: Web:Barko www.bbmfg.org Sam- Electric 160B

off onto a conveyor. This is a very

‘89 Timberjack 380A

well built processor. Item ID 13820.

‘05 Gehl CTL 70

‘93 Barko 180B

Has a 2

mounte

Ph: (888) 401-6367 knuckleboom, 30' boom,x702 75hp

Comes

motor, Rotobec continuous

Item ID: 14039 grapple, 5,000 original hours.

Sam x702 John Deere Dual Arch Grapple, Contact: Austin Firewood Processor - This is (excellent Item4000, ID John Deerecondition.). winch, Model Ph: (888) 401-6367 x703 Innovative a Chomper Model 16 PDA

ID 1386

2015 Joh

still a n

13238. Chris x700

Cummins Engine, Model 6BTA, Clean-Burn Design

1995 775 B Feller Buncher automatice processor ClarkBarko Transmission 28000.

Item ID 13799. Sam firewood x702 Item ID: JW-986495 with John Deere power unit with - Pumps recently redone. 400 hrs 13738. Austin x703 1998 Hydro Ax 611EX Saw Head Contact: J Williams ‘02 Prentice on injection pump. always 490 started low hours. Control panel includes Feller Buncher with about 8800 KOMATSU Ph: (888) 401-6367 x701 tach, oil pressure, water temp and good. in goodItem working 22in ID: 14047order. hours. Bunching Saw Head has 2007 Komatsu PC220LC w/2009 CAT D4H TSK Contact: Austin kohing head. head works great. amp gauges.

Cuts logs up to 16”.

Manufacturing a full line of biomass fired Item ID: 14035 Log Max 7000XT processing head. large pocket for accumulation and Itemofowner ID: 13558and Ph:Sam (888) x702 401-6367 x703 combustion systems backed withonfifty years chain conveyer, 8 way splitter, One comes with all AustinItem ID 13185.

Contact: Item ID: 14073 lifting 9700 hours on carrier. 7200 hours Contact:side Samshield for notching innovative clean-burn design. Diverse in every Ph: (888) 401-6367 x703 20,000lb goose neck trailer. Item ID manuals and receipts. Purchased 1999 Barko 160D - new engine with Contact: Austin way with multi-fuel blending capability. Hurst Ph: (888)trees 401-6367 x702felling. larger before on Log Max. Excavator style. Cab Item ID: 14011 Item ID: 13855 approximately 1500 hours.

13916. stokers Austin utilize x703 hundreds of commonnew Ph: (888) 401-6367 x703 Components to 2017 orHour 3000 hours. andfor $32,500. Item ID 13865.

Contact: Austin Contact: Sam Cummins engine. 28L tires at 60%. guard. Flotation pads. One owner. abundant solid biomass Sam fuels.x702 Best Value Portable Log Splitter meter dont work.

The with lastextras.

2 owners Totally loaded Has Ph: (888) 401-6367 x703 Ph: (888) 401-6367 x702 Decent running condition. Item ID Very good condition. Item ID LargeinorPA small with 1700 hours, in very good - Small manufacturer has scale, project LOGGING EQUIPMENT have only used it to load trucks or Only 4200 hours. Factory warranty manually. Great buy on this Deere. counterweight/running boards. management is eased with the Sam x702 13245.

13464. Sam x702 condition. Easily produces high made the best valued log splitter.

BANDIT as akeep backup as needed.

Has CTR Includes the JD 22” Hot aSaw with 5000 hours. Great running Tinted windows to help the impressively short installationuntil time 2002 Bandit Hydro 1900 Ax 621E - Arouund 2008 Komatsu D61-EX Dozer x702 chips with patented ‘Cone’ HydroAxlogs 611B injectors, quality Handles up- New torequired 32”.

Uses 1999 Tracked Disc delimber, grapple has been rebuilt. with prefabricated 40 degree tilt. 36” wide flotation condition. 35.5 tires at 60%. Tight sun and heat out. Item ID 13856.

12,000 hours on this machine.

- Greatcylinders Condition.

4511 Hours.

2004 Hydro 470easily - Thisload cutter injector pump.

New Manual 5.9modular cummins components.

Chipper Cat Under Carriage at drum design.Ax Can 42’ 13HP Honda motor. start Boom minor leaks. pads. have Simply perfect condition. and Dry. Great value. Item ID Sam x702 Working daily.

Item ID 13884.

Komatsu U/C at 95%.

35% Pads.

6 has around 7000 hours.

It’s a clean engine.

Rebuilt hydraulic pump vans and produce 6 - 8 loads per but electronic option is available.

50% or better.

Item 13694.

NewSam price isx702 $445,000. Save $40,000 13482. Sam x702 475 hp Cummins 2013 John Deere 437D - ThisID loader Austin 7500 x703 Hours. One owner.

Way Blade. Fully Enclosed comfort and tight machine. reason and Log new Lift. teeth.

Item4-way ID 13768.

Sam day.

Item ID 13882. Only Austin x703 Has Uses wedge Diesel.

94 Excellent 380 hoursvalue of use!. Item ID 2012 John Deere 548GIII - Single is still like brand new.

It Barko has been 275for- only 1998 711EX Saw Head Feller cab.

Great price!.

Item ID 13570. selling is due to an upgrade.

Item x702 EDGERS & GANGS adjustable to single two way. Great Well maintained.

Item ID well 13294. with atx702 3,500. 5.9 13574. Sam arch with winch, blade extensions, taken care of with onlylow 2932 at hours Buncher - 30.5-32 tires at 40%; Sam x702 continuous grapple.

ID 13846.

Sam- x702 1999 Hydroax - New Brewco Saws Two Brewco Saws Value!

PA. Item511EX ID 12062.

Sam x702 Sam x702 CUMMINS 1 new 28L and 3 @ 50%. This is hours. CSI delimber, Kodiak, Series 2014 John Deere 160G Excavator Cummins Engine rebuilt 4680 1500 2012 Komatsu D61EX 15 Dozer 2004 Hydrocondition.

Ax 670 - Engine has cummins engine with onlyis1500 in excellent Runs great.

Firewood Processor - This a 2004 Bandit Beast Model Item 13740. hourID excavator withSam only 1500 still a new machine with only 3600 3 hydraulic landing Runs gear. YouGreat!. will Low Rotary Dryers hoursCaterpillar ago; 8750 hours; Quadco with only 750 Hours. Triple aboutID 500 hours, new saw motor hours.

Caterpillar justwith replaced Item 13644.

Sam x702 3412 Diesel engine homemade processor a 10’ x702 Sand Dryers hours. Item ID 13780. Sam x702 not find another loader this clean. hours. Still a new machine. Item ID Grain Dryers log deck.

Has a hydraulic grapple, with 850 HP. Mill in and BELL Enclosed 22” Large tree5300 sawhrs. head.

Heat Rippers; Limb Sweeps; andFIREWOOD disc last year.PROCESSORS Previous owner gear box to hydraulics at the end 13841. Sam x702 2012/13 John Deere 200D Item ID 13822. Sam x702 Lumber Kilns 2010 Shop Built Wood Processor chain and kicker all total runs on off good condition.

Just finished 10 1990 Bell Heat/AC; Super T - This Bell has A/C work. bearings in JD saw. cab with 6 way had the hydrastats redone.

This of summer.

11000that hours 643Kblade; - There’s Excavator - This isNew still a like new 2014 753J Feller Buncher - NEW! 2014 John Deere Cement Kilns -has It has a 353 Detroit diesel, 40 of a 4 cylinder Mercedes power Acre clearing job, ready to work! a brand new Duetz engine.

Lever Cutting trees today.

Item ID 13353.

Undercarriage at 90%; Excellent a 22” high capacity head and is cutter.

BrickTires Kilnsare 28L’s @ 80%, 2 not much to say about this feller excavator with only 3000 hours.

- Treat as NEW! Only 381 hours.

YEARS inch insert circle Mounted saw, 30 foot Remote control. Big production control, 33” Item bar, pump and tranny unit.

Has a 4’ chain thatnew kicks Sam Condition!. a very cleantooth machine. on @ 40% and one slick.saw Brand buncher.ID It’s13459. still brandSam new out Comes x702 with a stationary rockland Standard warranty expired, but x702 34’s with 50% tread. Item ID 13828. center section. 20” single post KMC of the box with only 1452 hours. thumb that can be adjusted has Extended Warranty on Major  Issue 364 ❘ 391 Lumbermens™  since 1986  List  seLL  exchange  buy  save ❘  LumbermensCO.com 2014 Komatsu 450 - Only 1100 Sam x702 head. Heat and air work. Item ID KMC Track Skidder 2500P -

‘83 John Deere ‘06 Western Star 4850 Michigan Special

‘08 John Deere CT332

Corley Complete Sawmill

50

 Issue 364 Lumbermens  since 1986 ❘

 List  seLL  exchange  buy  save

Item Conta Ph: (8

❘

hours. O

compan

Dual ar

turn aro

HD axle

and stil

an exten bought

lot of m

skidder

Item ID

2015 Joh

skidder

only 10 on 30.5

of tire c

joystick

wide bl on this

because

13935. S

84/85 Jo

skidder

Power C

 Lum

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 13

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

BANDSAW

BLADES

“Precision Under Pressure”

All Sizes Available!

TOP PERFORMING, economical blades for all primary & secondary wood processing. Welded to your lengths!

We also offer expert sharpening services, plus...

Gang • Edger • Scragg • Trim • Split • Strob ....and just about any Custom Saws you need to keep you cutting longer... for less. Ask about FREE Shipping!

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

Call Marvin Miller for a quote ©2019 Wood-Mizer LLC

231-924-5953

(fax) 231-924-6166 / 11606 Brickyard Road • Holton, MI 49425

ROW ELECTRICAL EQUIPMENT, ‘95 INC. John Deere C6 YOUR SOURCE FOR USED, RECONDITIONED: Tree Farmer

• • • • •

Squirrel Cage Motors Gear Motors Wound-Rotor Motors Synchronous Motors DC Motors

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606 ax to

F

:

419-244-8887

• • • • •

DC Motors - Crane and Mill • Transformers, Three-Phase Item ID: 13920 Adjustable Speed Drives • Across/Line Magnetic Starters Contact: ‘13 KMC 2500 Track Generators - AC and DC • Reduced VoltageAustin Starters Ph: (888) 401-6367 x703 Engine-Generator Sets • Safety Switches Skidder Transformers, Single Phase • Phase Convertors Item ID: 14078 P.O. Box 2812 • Toledo, OhioAustin 43606 Contact: capacity!. Item ID 13421. Sam x702 Ph: (888) 401-6367 x703 WWW.RoWELECTRiCAL.CoM

800-248-4479 BARKO

419-248-4479 rowelec@glasscity.net sales@rowelectrical.com 1994 Barko 160B - Electric WE ANSWER THE PHONE 24 HOURS • WE BUY USED ELECTRICAL knuckleboom, 30' boom, 75hp off onto a conveyor. This is a very well built processor. Item ID 13820.

motor, Rotobec continuous

Firewood Processor - This is

(excellent condition.). Item ID

Sam x702

a Chomper Model 16 PDA

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams H140 ‘16 Halverson Ph: (888) 401-6367 x701 Skidsteer

Bell Ultra T on ‘83 John Deere Tracks

Item ID: JW-192810 Contact: J Williams Ph: (888) 401-6367 x701

4850

Item ID: 14023 Contact: Sam Ph: (888) 401-6367 x702 Item ID: 14073

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID

Contact: Austin

with drive.x703 Comes Ph:winch, (888) direct 401-6367

with 6000 hour extended warranty.

Has only 2600 hours. Has new

with 1700 hours, in rear veryand good 30.5 X 32 26 ply on 70% condition.

Easily produces on front. Still a new skidderhigh and

priced to sell.with Itempatented ID 13696.‘Cone’ Sam quality chips x702

drum design. Can easily load 42’ 2013 JD 848H Grapple Skidder -

vans and produce - 8 loads per 4200 hours.

Tires at6 50%.

Winch.

day.

13882. Austin x703 VeryItem goodID running condition.

Pins

EDGERS & GANGS

are tight. Machine is dry. Engine runs great. Item ID 13555. Sam

Brewco Saws - Two Brewco Saws x702

in excellent condition.

Runs great.

1991 John Deere 640D Skidder Item 13644.

- 23.1ID x 26 TiresSam 50%,x702 Rebuilt

FIREWOOD PROCESSORS

Trans.,Good Tight Machine. Item ID 13191. Sam x702

2010 Shop Built Wood Processor 1995 JD 290D with Hytec 4700

-Harvester It has a 353 Detroit diesel, 40 Head - 290D in good

inch insert Engine tooth circle saw, 30 foot condition. just overhauled.

Undercarriage at 50%. New water pump.

Runs well.Lumbermens Cab has heat ™  Issue 364 391 and air with stereo and all run

well. Head recently updated and

does great job x703 in hardwood. Priced 13916.

Austin to sell!. Item ID 12206. Sam x702

Best Value Portable Log Splitter

John Deere 20 hole Sweda wheels

-- Small in PA These manufacturer 50’s are mounted onhas hard

automatice firewood processor

with John Deere power unit with

low hours.

Control panel includes ‘05 CAT TK560 Item 14004 tach, oil ID: pressure, water temp and Contact: Sam

amp Cuts logs up to 16”.

Ph:gauges.

(888) 401-6367 x702 One owner and comes with all

manuals receipts.

1977 (est)and FMC 220CAPurchased Tracked Skidder w/ESCO Swing Boom new for $32,500.

Item ID 13865.

Grapple - Good running condition.

Sam x702

Front blade. Detroit 6V53 engine.

LOGGING EQUIPMENT BANDITMilitary style swing boom grapple.

grapple, 5,000 original hours.

13238. Chris x700

1995 Barko 775 B Feller Buncher

-Sanborn Pumps recentlyScragg redone. 400 hrs

Mill

on injection pump. always started Item ID: 14050

good. in good working order. 22in Contact: Austin Woods (888) 401-6367 kohing head. head Ext. works606 great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with 13910.

Austin x703 Franklin 170 Skidder - This Hour would approximately 1500 hours. be a great starter skidder. It is

meter dont work. The last 2 owners a single arch with winch. Runs

No winch....they cannot fit with

have used good. it to load trucks or good only and pulls Detroit 453

rims. Stilllogs 50%up tread left Uses on these Handles to 32”.

tracks at 70%.

Item ID 13227.

1999 Bandit 1900 Tracked DiscSam

transmission.

Good center delimber, grapple has beensection. rebuilt.

Sam x702

2012 Refurbished FMC 210 Tracked

made log splitter. to findthe 20 best hole valued John Deere sweda tires. 4 available. Item ID 13852.

13HP Honda motor. Manual start but electronic FABTEK option is available.

Has Lift.546C UsesForwarder 4-way wedge 2004Log Fabtek -

Good running condition.

30.5Great tires adjustable to single two way. in front at 60%. 650 tires in back at

Value! PA. Item ID 12062. Sam x702 60% and come with tracks. Front

Firewood Processor - This is a blade. JD engine.

One owner.

homemade processor a 10’ Double bunk.

Item IDwith 13363.

Sam

3-5

x702 log deck. Has a hydraulic grapple,

FMC

chain and kicker that all runs off 1977 (est) FMC 220CA Tracked

of a 4 cylinder power Skidder - GoodMercedes running unit.

unit.

Has a 4’ cranks chain saw Detroit 6V53 andthat runskicks well. Military style tracks at 70%.

x702

Chipper - Cat Under Carriage at

50% or better. hp Cummins Skidder - 1976475 Model that has been Diesel.

7500 Hours.in One owner. totally refurbished 2012.

No

hoursmaintained. since updates were done.

Well Item ID 13294.

Includes warranty on machine and

Sam x702

tracks. Detroit 6V53 engine with

2004 Bandit Model 4680 195HP. ClarkBeast 28000 Powershift 3412 Caterpillar Diesel engine transmission.

Clark 40,000 lb

Winch.

Cab.hrs.

Includes with 850ROPS HP. 5300 Mill inbolt

on grapple head with full function.

Sam x702

There are a few leaks, but nothing

Boom cylinders have minor leaks. major. Item ID 13819. Sam x702

Item ID 13694.

Franklin 3000 -Sam 4BT x702 Cummins

94 Barko 275approximately - Excellent value engine with 600

hours.

Needs tires.atGood with low at hours 3,500.machine 5.9 for the money and for a start up

CUMMINS continuous grapple.

company. Item ID 13786. Sam x702

Runs Great!. Item 13740. Skidder Sam 2003 Franklin Q80ID Grapple x702 - 7500 hours, but just 5000 hours

BELL

on reman engine. New Radiator; New Hydraulic Pump; Comfort

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control.

Big production FRANKLiN

control, 33” bar, pump and tranny Sam x702

New Paint. Item ID 12731. Sam

Acre x702 clearing job, ready to work!

1995 Franklin 170 - Enclosed cab,

Fixed 1986 ESCO Grapple and working single arch with a winch,  since ❘  List  seLL  exchange buy new save Winch. Front Blade. Item ID 13226.

as a backup as needed.

Has a CTR turbo and 3 speed power shift

paint, 4 brand new 23.126 firestone tires, around 15000 hours. Item ID

cab with good working heat and

aair; brand Duetz engine.

Lever Tiresnew at 80%.

Item ID 12450.

GMC

2000 1.5 ton Service Truck ❘ GMC  LumbermensCO.com - PTO driven air compressor,

big boxes, covered hose reels,

ngle Joystick Control 0 Ton Splitter • 67 HP CAT Diesel Cylinder Engine

o Choose From!

4000 SERIES

BELL’S FIREWOOD PROCESSORS BELL’S FIREWOOD PROCESSORS ManyPROCESSORS Models & BELL’S FIREWOOD CALENDAR**

**

• 67 HP CAT Diesel • 44” Circular Engine Saw 44” Circular Saw • 20”• Diameter • 20” Diameter Capacity Diesel Capacity • Single Joystick FIREWOOD TUMBLER • Single Joystick Control Saw • Sturdy HSS Steel Welded Control • 30 Ton Splitter er • 30 Ton Splitter • 4’ Diameter Barrel Cylinder Cylinder • 67 HP CAT Diesel ick • Clean Out Chute

4000 SERIES

Options to Choose From!

4000 SERIES

Many Models & FIREWOOD TUMBLER • Sturdy HSS Steel Welded 4000 SERIES Options to Choose From!

• 4’ Diameter Barrel

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York

www.starwebhosting.net/woodsmen/ 67 HP CAT Diesel • 44” Circular Saw •• Removes Debris & Bark as large as• Clean 2 ¼”Out Chute • 67 HP CAT Diesel er Engine • 20” Diameter • Removes Debris & Bark as large as 2 ¼” Engine Capacity •• Works with Lift 44” Circular Saw all of our Double chain•Hydraulic Works with all of our conveyors Double chain Hydraulic Lift conveyors ••Single 44”Joystick Circular Saw 20” Diameter • Optional Honda Power Pack Available TUMBLER Control Honda PowerFIREWOOD •• Optional Pack Available Capacity Diameter ••30 20” Ton Splitter • Sturdy HSS Steel Welded • Single Joystick Cylinder Capacity Hot Springs, Arkansas • 4’ Diameter Barrel Control • Single Joystick • Clean Out Chute www.arkloggers.com • 30 Ton Splitter Control • Removes Debris & Bark as large as 2 ¼” Cylinder Engine

4000 SERIES4000 SERIES SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August The Tree Many Models & Many Models & that Started Options to Choose From!

Options to Choose From! it Models All! • 30 TonMany Splitter Lift conveyors &• Works with all of our Double chain Hydraulic 72ND ANNUAL GREAT LAKES Cylinder • Optional Honda Power Pack Available Options to Choose From!

Since 1986, Lumbermens has LOGGING & HEAVY EQUIPMENT EXPO Many Models & FIREWOOD TUMBLER Made In published a monthly circular Canada Options to Choose From! FIREWOOD • Sturdy HSSTUMBLER Steel Welded Thurs, 7 Sept - Sat, 9 Sept

•• Sturdy HSS Steel 4’ Diameter BarrelWelded reaching sawmills, loggers, Escanaba, Michigan Clean Out Chute •• 4’ Diameter Barrel TUMBLER pallet makers,FIREWOOD recyclers and Many Models & • Clean Removes Debris & Bark as large as 2 ¼” • Sturdy HSS Steel Welded• FIREWOOD TUMBLER Out Chute industrial woodworking plants • Sturdy HSS Steel Welded Works withDebris all of our Double chain Made In • 4’ Diameter Barrel Options to Choose From!

LOGGING & BIOMASS •• Removes & Bark asMID-ATLANTIC largeHydraulic as 2 ¼” Lift conveyors worldwide. • Clean Out • 4’ Diameter Barrel • Optional Honda Power Pack Available Chute

Canada Many Models • Works with all&of our Double chain Hydraulic Lift-conveyors Please Call for Details • Clean Out Chute Fri, 15 Sept Sat, 16 Sept • Removes DebrisDebris & Bark as large as 2 ¼” • Removes & Bark large Made In as 2 ¼” Honda Power Pack Available •as Optional PUBLISHER • Works with all of our Double chain Hydraulic Lift conveyors • Works with all of our Double chain Hydraulic Lift conveyors Selma, North Carolina Options to Choose From!

Canada Woods• Publishing Optional Honda Power Pack Available FIREWOOD TUMBLER Optional• Honda Power Pack Available www.midatlantic-logging-biomass­ • Sturdy HSS online Steel Welded MID-ATLANTIC or visit us ADVERTISING SALES expo.com/ LOGGING & BIOMASS EXPO • 4’ Diameter Barrel

1-888-995-1965

Details

www.bellsmachining.com • Clean Out Chute Morris Woods FIREWOOD TUMBLER • RemovesAvailable Debris & Bark as large as 2 ¼” (888) 401-6367 ext.

704 Financing KENTUCKY WOOD EXPO • Works with all • of Sturdy our Double HSSchain SteelHydraulic Welded Lift conveyors morris@lumbermens.co Made In Please Call for Details • Optional Honda Power Pack Available

MARKETING DIRECTOR 1-888-995-1965 John Williams

-1965or visit us online

Made In Canada

Made In Canada

(888) 401-6367 ext. 701 j@lumbermens.co www.bellsmachining.com

Fri, 15 Sept - Sat, 16 Sept • 4’ Diameter Canada Barrel • Clean Out Chute Lexington, Kentucky MadeDebris In • Removes & Bark as large as 2 ¼” Canada http://www.kfia.org/ • Works with all of our Double chain Hydraulic Lift conveyors KentuckyWoodExpo.aspx • Optional Honda Power Pack Available

nline Please CallPlease for Details Call for Details DESIGN DIRECTOR Financing Available 1-888-995-1965 Donna1-888-995-1965 Heninger ning.com Please Call fororDetails visit us onlineCall for Details Please EQUIPMENT REPS or visit us online www.bellsmachining.com ailable 1-888-995-1965 Sam Wall Financing Available

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

Made In Canada

Cambridge, Ohio www.ohioforest.org

1-888-995-1965

www.bellsmachining.com (888) ext. 702 or visit us 401-6367 onlineFinancing or visit usAvailable online sam@lumbermens.co www.bellsmachining.com Please Call for Details www.bellsmachining.com Austin Woods Financing Available

Made In Canada

** INFO LINK**

1-888-995-1965 (888) 401-6367 ext. 703 Available Financing

or visit us online austin@lumbermens.co www.bellsmachining.com MAILING ADDRESS Financing Available & B Mfg. ............................... 18 M&F Gauge ............................. 28 P.O. Box 1916 Please Call for BDetails

1-888-995-1965

Columbia, TN 38402-1916 (888) 401-6367

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

May be sent to­ Bell's Machining ..................... 27 www.bellsmachining.com morris@lumbermens.co

Metal Detector's Inc. .............. 30

AD SUBMISSIONS or visit

us online

Brute Force Mfg. ..................... 31 Financing Available

POSTMASTER

‘94 Caterpillar 320

Midwest Sharpening Item ID: 13936 .............. 26

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Contact: Austin Mor bark .....................................

9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

4000 hours. Torque convertor 40 Rotochopper ............................

CW Mill-Hogzilla ................... 15 Dyna Products ........................ 35 Empire Hydraulics ................... 8 Great Lakes Mfg. .................... 34 Hahn Machinery ...................... 3 Hurst Boiler ............................. 14 Iron Bull ................................... 21 Kilgore Saw ............................. 22 Lignomat ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Ph: (888) 401-6367 x703

transmission.

14 hole wheels. Tires Row Electric ............................

20 are 30.5’s at 55% and one at 80%.

Sawmill Exchange .................. 11 Center has very little slack. This Select Sawmill ......................... 19 skidder has been a back up skidder Smith Sawmill ........................... 4 for the several years. Skidder has The Paul Bunyan Show .........

39 12000 hours.

Item ID 13805.

Sam Thomas x702 Industrial Controls..... 10

1981 Timberjack Very..hard Union Grove Saw520 & -Knife 2, 37to come by!

653 Detroit.

Runs Great!.

Universal Refiner ................... 23

Item ID 13741. Sam x702 WoodMizer ................................ l 2002 Timberjack 608s with hot saw

- Approx. 6000 hours, Machine is  SELL YOUR EQUIPMENT TODAY TODAY ❘ 0  24/7 SUPPORT l§ SUPPORT  Issue 364

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

19 44

Ite Co Ph

is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage,

sawyers cab, computer ‘88 John Deerecontrols, 440D

cabinet with electronic drives for Skidder

58 Ch

Ite Co Ph

carriage knees, husk including Item ID: 13781

Rem

Ph: (888) 401-6367 x702

Spee

48" bottom saw Contact: Samand 36" top saw

STACKING RAC

in very good shape and has been well maintained. Item ID 12194.

Sam x702

‘98 Timberjack 1270B - 7,300 hrs.

Perkins 6 Cylinder Engine. All

modules and computer are brand new. Tires on average are around 80% Video: http://youtu.be/R_

MQZe5QEFw. Item ID 13572. Chris x700

VALMET

1998 Valmet 603 3-Wheeled www.BakerProducts.net Buncher - 6500 Ihours on total 800.S48.6914 S73.663.7711

machine but no hours on 4BT3.9 ❘ L!  (888) 401-MENS NO. 15 401-MENS

Lumbermens  since 1986

❘

Equ

40%

mac

main

Har

of co

avai

Item

2005

Forw

hyd box

2012

pum

cond

hou

 List  seLL  exch

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

PROTECT Them ALL ® With Pro-Tec-To Wrap

“Precision Under Pressure”

‘16 Halverson H140 Air Lines (DEMO) Skidsteer

Hydraulic Lines – Fuel Hoses – ID: JW-909632 Electric Wire Bundles – ControlItem Cables

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

Contact: J Williams Ph: (888) 401-6367 x701

PRO-TEC-TO® WRAP & PRO-TEC-TO® SLEEVE CUT YOUR DOWNTIME AND YOUR COSTS! Protection Against Pinching, Crushing, Rubbing & Abrasion – EVEN UV RAYS! Both are Impervious to Oils and Solvents.

For The Distributor Nearest You, Call

Provides Maximum Protection for Logging, Construction & Stationary Applications Like: • Debarker Buggies • Pantograph Arms • Forklift Masts • Wheel Loaders • Skidder Grapples • Knuckleboom Loaders • Fellerbuncher Heads • Harvesting Heads • Stroke Delimbers • Dozer Blades

800-355-1250 ‘13 KMC 2500 Track or Visit Skidder www.pro-tec-toproducts.com

13428 Victory Hoses Ln. // & POWires Box 124 Anywhere Are – Pro-Tec-To® Products AdamsMaximum Center, NY 13606 Lower Costs, Reduced Offers Protection,

Downtime and Less Spills!

Item ID: 14078 Contact: Austin OEM’s, Repair Facilities & Ph: (888) 401-6367 x703 Distributor Inquires Welcome off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 391

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

‘95 John Deere C6 Tree Farmer Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

3

. Just

r PT

ling

nch.

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

MID-ATLANTIC Every Reputable Wide Band Morris Woods Supplier Offers (888) 401-6367 ext. 704

ADVERTISING SALES

LOGGING & BIOMASS EXPO

morris@lumbermens.co 3 High Quality Swedish

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

Steel

MARKETING DIRECTOR 3 3” – 8” Band Width

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams 3 401-6367 16 to 20ext.

Gage (888) 701 j@lumbermens.co 3 Double Cut Options

DESIGN DIRECTOR 3 Choice of Swage Donna Heninger

EQUIPMENT REPS

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

or Stellite

WOLVERINE

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

BUTSam ONLY Wall THE (888) 401-6367 ext. 702

BY MENOMINEE SAW GUARANTEES sam@lumbermens.co

Cambridge, Ohio www.ohioforest.org

Saw Capacity ADDRESS from our HUGE Inventory •MAILING Quick Delivery B & B Mfg. ............................... 18 P.O. Box 1916 Columbia, TN 38402-1916 • Fast Sharpening & Exchange Program B. H. Payne .............................. 16 401-6367 to(888) Keep YOU Running Baker ...................................... 5, 7 AD SUBMISSIONS • Competitive May be sent to­Pricing Bell's Machining ..................... 27 morris@lumbermens.co

AndPOSTMASTER ONLY Menominee Buck Equipment (AIM) ........ 36 Send address changes You need in to: a Wide Band Saw – Plus Lumberman's Exchange Corley Mfg ..............................

32 Expert from the Industry’s Most P.O. BoxService 1916 Columbia, TN Knowledgeable 38402 CRDStaff.

Metalworks .................... 25 Brute You Force Everything Mfg. ..................... 31 Gives

BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

Quality Brand Reg. U.S. Pat Off

Circular Saws

in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

2010 Cardinal HD Carriage

Ax

with onboard log turners, carriage

Call 800 752-0627 drive, hyd pac for carriage,

ID: Complete 13948 Saw Catalog ItemSawID: 13916 Make Sure29 To Ask ForItem Our Free, Bits and Shanks.....................

Menominee Saw sawyers cab,Austin computer controls, Contact: Contact: CircularAustin Knives We Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth Tipped Saws cabinet with401-6367 electronic drives Ph: (888) x703for Metal Detector's Inc. ..............

Ph: Carbide (888) 401-6367 x703 30 Carbide Strobe ® Saws Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also carriage knees, husk including Midwest Sharpening 26Bits & Shanks, B.H. Payne & Company ..............

Stock & Sell Carbide Tips, Diamond Wheels, Saw Manufacturers 48" bottom saw and 36" top saw Knife Grinding Wheels, Saw Gumming Wheels & Knives.

Morbark ..................................... 9 Skidder - Very good running

ID 13438. Sam x702

TOLL FREE 1-800-582-0470

WWW.MENOMINEESAW.COM

attach in 15 min. to switch head to

“Since 1890”

Universal Refiner ...................

23 filters; Re-insulated cab; Checked and fixed wiring as needed. Iteml WoodMizer ................................

E-mail: info@paynesaws.com

shift

at 13

main 24”

‘1

year

Ite hyd

Co Roll

Ph

com

retir

for h

P.O. Box 90608 grapple, etc; neededSawmill – fill pump, Smith ........................... 4 East Point, GA 30364 Repacked hydraulic fill pump; The404 Paul Bunyan Show ......... 39 761-8711 Replaced exhaust; Replaced center Fax 404 761-5398 Thomas Industrial Controls..... 10

pins; Straightened and painted Union Sawall &fluids Knife..

2, 37 panels;Grove Changed and

Run

bunk. New swing gear box. Quick

total hours. Runs very well. Has

B.H. Payne & Company, Inc.

Ite Co Ph

STACKING RAC

resealed hydraulic cylinders – Sawmill Exchange ..................

11 grapple arch, steering; Replaced

Select Sawmill 19 hydraulic hoses......................... and lines where

‘99 51

Item

Here’s ...................................

What You Get With Every Payne Saw 810 Combi condition.

Big Capacity Grapple!

2007 TimberPro Multitek 12 B.H. • Saws manufactured from only the Highest Quality Nickel Alloy 9400 hours.

40%.

Totally Machine - Forwarder set Steel. up but Piper's SawTires Shopat....................

13 • Each Saw Milled with State-Of-The-Art Precision CNC Milling Machine. gone through by TP Dealer who comes with rebuilt Log Max 750 The Lumberman's Exchange is ............................

CW Mill-ArmorHog .............. 17 Rotochopper • We Tension Your Saw to Your40RPM Speed BEFORE Leaving Our Factory.

Got a Wide Band Problem? did the following: Repacked and processing head. Less than 5200 published monthly by Woods • Your Satisfaction - Completely Mill-Hogzilla ................... 15 Row Electric ............................

20Guaranteed.

Publishing, P.O. Box 1916, Call Menominee SawCW Today and You’ll Columbia, TN 38402. All rights Dyna Products 35 Why More Mills Trust the ........................

Pro! reserved. AllLearn editorial/ advertorial submissions are used at the Empire Hydraulics ................... 8 discretion of the publisher and may be edited for purposes of clarity Great Lakes Mfg. .................... 34 and space. Although all efforts have Hahn Machinery ...................... 3 been made to ensure accuracy of content submitted by advertisers Hurst Boiler ............................. 14 and writers, the Lumberman's 900 16th Exchange, its principles and St., Menominee, MI 49858 Iron Bull ................................... 21 associates, are not liable for Tel:held 906-863-2609 Fax: 906-863-1147 errors or omissions. Reproduction, Kilgore Saw ............................. 22 info@menomineesaw.com in whole or part,Email: is prohibited with­ Lignomat ................................. 24 out written consent. ©2017 Woods Publishing

Ite Co Ph

is an extremely accurate machine

Traditional Quality Combined Carriages (Sawmill) - Cardinal Carriage line itEx-Hydro includes carriage ‘98 611 Todays Technology ‘10Gauge Shop Built With M&F .............................

28

WoodMill, Processor Meadows Inc. ................ 33

‘05

is supported on both sides. This

Sam x702 From B.H. Payne When You Buy Your Circular Saws CARRIAGES & DRIVES You’ve Bought the best... We Guarantee It!

** INFO LINK**

Austin Woods • Cutting Edge Plasma Welds (888) 401-6367 ext. 703 austin@lumbermens.co • The Industry’s Highest Band

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

blade and plumbed for a clam

grapple. Cummins 6.7 QSB engine.

260HP. Optional Tracks on all

bogies adds $10,000. Item ID 13501.

Sam x702

2010 TimberPro 725B w/Rolly II

Processor - Super Clean Machine. www.BakerProducts.net Web Site: www.paynesaws.com 800.S48.6914 I S73.663.7711

2006

Harv

hour

with and

‘0 bogi Tr from Lo man

Ite Co new Ph

top s

1343

War  Issue 364 Lumbermens  since 1986 ❘  List  seLL  exch Com USED FORESTRY EQUIPMENT ❘ l§ 630C SELLGrapple YOUR EQUIPMENT TODAY TODAY ❘ 0  24/7 SUPPORT  (888) 401-MENS NO. 17 401-MENS SALE SUPPORT ❘ L! Model -roatation on the grapple w/ a FOR SALE 2006 Tigercat 1050 30’ reach on the boom. Joystick Skidder - Very good running and

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer 2005 PRENTICE 210E LOG LOADER Barko 395ML

Item ID: 99946

2005 Prentice 210E with 6,839 hours. Joystick machine. Mounted on a LT9000 truck. Loader is in good condition no leaks, great running 124 unit. Got the Circle slasher to go with it.

Everything work as it should. Call for more info.

Item ID: 99943 13428 Victory Ln. // PO Box Barko 395 ML with 4700 hours on it. 6 cylinder john deere engine.

Adams Center, NY 13606

H O T

B U Y S

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

OR 931-797-3915

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

OR 931-797-3915

Item ID: 99947

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

Timbco T425-C under carriage is at 75%. it has a 8.3 Cummins in it... with a hotsaw head. Buncher is in good shape and working daily until sold. Call capacity!.

Item ID 13421. Sam x702 for video.

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

OR 931-797-3915

1994 Barko 160B - Electric Phone: 888-401-6367 EXT 707

off onto a conveyor. This is a very Sam x702

Firewood Processor - This is

John Deere 648D

Item ID: 99942 ‘83 John Deere 4850

1988 John Deere 648D dual arch Grapple skidder. Skidder has only been logged with the past 2 years. Center section is tight, Grapple works. Skidder starts runs, and operates as it should. Comes with a 648D parts machine that has a good front end, rear end, tranny, and blade. Call for more info.

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

John Deere 440A in excellent condition.

Runs great. cable skidder ItemSam ID: 99941 Item ID 13644. x702

FIREWOOD PROCESSORS

80’s model John Deere 440A cable skidder call for more info.

2010 Shop Built Wood Processor Contact: WALKER

-Email: It hasWalker@lumbermensco.com a 353 Detroit diesel, 40 Phone: 888-401-6367 EXT 707

inch insert circle saw, 30 foot

ORtooth 931-797-3915  Issue 364 391

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

Morbark 23 disc chipper Item ID: 99944

2005 Morbark 23 disc chipper wcl. Whole chain conveyer, 8 way splitter, on machine has 6300 hours.... but engine was just

replaced and has 4300 hours.

20,000lb goose neck trailer. Item ID

Contact: WALKER 13916.

Austin x703

Email: Walker@lumbermensco.com Phone: 888-401-6367 707 Best Value PortableEXT Log Splitter

OR 931-797-3915

- Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours.

Control panel SATCO 318Tincludes

processing head tach, oil pressure, water temp and Item ID: 99945 amp gauges. Cuts logs up to 16”.

Firewood Processor - This is a

Johnprocessor Deere with 437D homemade a 10’

Item ID: 99939 log deck. Has a hydraulic grapple, 2016 John Deere 437D log loader

chain and kicker that all runs off Contact: WALKER

of a 4 Walker@lumbermensco.com cylinder Mercedes power Email: Phone: 888-401-6367 EXT 707

unit.

HasOR a 4’ chain saw that kicks

931-797-3915

Lumbermens™  since 1986

❘

motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

meter dont work. The last 2 owners Email: Sam@lumbermensco.com

LOGGING EQUIPMENT BANDIT

50% or better. 475 hp Cummins

Value! PA. Item ID 12062. Sam x702

OR 931-797-3915

Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 Sam x702

OR 931-797-3915

Contact: WALKER Item ID 13865. new for $32,500.

but electronic option is available.

adjustable to single two way. Great

knuckleboom, 30' boom, 75hp

Timberjack Item ID 13185. Sam430 x702PARTS Item ID: 99931 1999 Barko 160D - new engine with

1999 Bandit 1900 Tracked Disc

Has Log Lift. Uses 4-way wedge

BARKO

Contact: WALKER Email: Walker@lumbermensco.com

manuals and receipts. Purchased

Unit has only 3800 hours on it. It was removed from owner machine because it was bigger One and comes withthan all what was needed. Head functions properly and is very dry. Call for more info.

Handles logs up to 32”. Uses

13HP Honda motor. Manual start

Item ID: 99948

2004 Tigercat 630C in Good condition. center section tight. no leaks. Grapple works, winch works. pulling wood daily. Call for video and more info.

well built processor. Item ID 13820.

‘05 Gehl CTL 70

Item ID: 13920 Contact: Austin Timbco 425C Ph: (888) 401-6367 x703

‘13 KMC 2500 Track Tigercat 630C Skidder

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine

Deere 540D with88’ 850 John HP. 5300 hrs. Mill in Item ID: 99915 good condition. Just finished 10 Contact: AUSTIN

Acre job, ready to work!

Email:clearing Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Remote control.

Big production

OR 931-797-8029

 List  seLL  exchange  buy  save

1993 Timberjack 430 great parts machine! good

approximately 1500 Hour old loader bad motor Callhours. for more picures!

Contact: SAM

Phone: 888-401-6367 EXT 702

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

Serco Grapple Item ID: 99912

BELL

2010 Serco grapple very good condition.

Came Bell off a Super 7500 Serco Loader,Bell 70" has opening.

1990 T - This

Contact: TED

aEmail: brand new Duetz engine. Lever Teds@lumbermensco.com Phone: 888-401-6367 EXT 701

control, 33” and tranny

or bar, (801) pump 319-9351 ❘

 LumbermensCO.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

John Deere 700H Forestry Dozer

Boonville, New York www.starwebhosting.net/woodsmen/

2013 John Deere 753J Item ID: 99902

Item ID: 99930

The Tree Contact: SAM Email: Sam@lumbermensco.com that Started Phone: 888-401-6367 EXT 702 it All!

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

MC Woods 166 Rotochopper Publishing Item ID: 8165

ADVERTISING SALES

Morris Woods Contact: SAM (888) 401-6367 ext. 704 Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 morris@lumbermens.co

Email: Austin@lumbermensco.com Hot Springs, Arkansas Phone: 888-401-6367 EXT 703 www.arkloggers.com

OR 931-797-8029

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Selma, North Carolina John Deere 333G Skid Franklin Mulcher www.midatlantic-logging-biomass­ Steer MID-ATLANTIC Item ID: 99927 Item ID: 31439

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Donna Heninger

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

SendDeere address640D changes to: John Cable Lumberman's Exchange Skidder P.O. ID: Box43930 1916 Item

Columbia, TN 38402

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's John Deere 648H Grapple Exchange, its principles and w/Winch Equipment associates, are not held liable for Item ID: errors or omissions. 99849 Reproduction, in whole or part, is prohibited with­ Contact: SAM Email: Sam@lumbermensco.com out written consent.

Phone: 888-401-6367 EXT 702 ©2017 Woods Publishing

1998 John Deere 548G Grapple skidder

Cambridge, Ohio www.ohioforest.org Valmet 430FXL with

Komatsu 233 barsaw

Item ID: 99921

Item ID: 99908

** INFO LINK**

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

OR 931-797-3915

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Bandit 1850 Track Chipper

BANDMILLS & 99904 HEADSAWS Item ID:

Danckaert Band Resaw - Roughly Contact: AUSTIN Email: Austin@lumbermensco.com 10 hours on this machine since it Phone: 888-401-6367 EXT 703

OR 931-797-8029 has been rebuilt, it has a 24foot in

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

Loader isMichagan supported onWheel both sides.

This Item ID: 99929 is an extremely accurate machine Contact: SAM in ve1y good condition, Cuts 130 Email: Sam@lumbermensco.com feet a minute also has CLT presses.

Phone: 888-401-6367 EXT 702 Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours

on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Timberjack 380 Sam x702 Item ID: 99926

CARRIAGES & DRIVES

Contact: SAM 2010 Cardinal HD Carriage Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 Carriages (Sawmill) - Cardinal

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) ........ 36 2014 Prentice 2210

Morbark 08’.....................................

Valmet 415EX 9 Item ID: 99923 Multitek ................................... 12

“Self Corley Mfg Propelled” .............................. 32 Item ID: 99900 CRD Metalworks .................... 25 Contact: AUSTIN

Email: Austin@lumbermensco.com CW Mill-ArmorHog 17 Phone: 888-401-6367 EXT 703 OR..............

931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Piper's Saw Shop.................... 13 Phone: 888-401-6367 EXT 703

OR 931-797-8029 Rotochopper ............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

John Deere 135D Iron BullExcavator ................................... 21

Item ID: 99850 Kilgore Saw ............................. 22

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Lignomat ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Timberjack 225 Cable Skidder

Union Grove Saw Knife.. 2, 37 Item ID:&99817 Universal Refiner ................... 23 Contact: TED Email: Teds@lumbermensco.com

Phone: 888-401-6367 EXT 701 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY TODAY l§

or (801) 319-9351

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

John Deere 650G Item ID: 99928

STACKING RAC

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Bell Ultra-C Tracked Cutter Item ID: 46567

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

www.BakerProducts.net 800.S48.6914 I S73.663.7711

❘ L!  (888) 401-MENS 401-MENS

NO. 19

L O G G I N G

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR

Contact: AUSTIN Austin Woods Email: Austin@lumbermensco.com (888) 401-6367 Phone: 888-401-6367 EXText.

703 703

OR 931-797-8029 austin@lumbermens.co

Contact: SAM

KENTUCKY WOOD EXPO Email: Sam@lumbermensco.com Phone: EXT 702 Fri, 15 Sept888-401-6367 - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Sam Wall 2004 EXL (888)Timbco 401-6367425 ext. 702 Item ID: 99855 sam@lumbermens.co

expo.com/

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

EQUIPMENT REPS

2011 Volvo Delimber

Item ID: 99919 EXPO SOUTHWEST FOREST PRODUCTS Fri, 25 August - Sat, 26 August Contact: AUSTIN

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

TIMBERJACK 230A

Prentice 2384

Item ID: 9450

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

Kubota SVL-95 2s Item ID: 4861

L O G G I N G

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709

OR 801-362-2170

Item ID: 27398

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

2010 John Deere 648H TC Skidder Item ID: 57023

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Item ID: 13909

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367170 x703 '93 Franklin

PARTS '95 Timberjack 450 Dual Arch Skidder Item ID: 12270

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701

or (801) 319-9351

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID

Email: Teds@lumbermensco.com condition.

Easily produces high Phone: 888-401-6367 EXT 701

or (801) quality chips with319-9351 patented ‘Cone’

‘89Austin Timberjack 230A 13916. x703 Item ID: 13885 Best Value Portable Log Splitter AUSTIN in PA has -Contact: Small manufacturer Email: Austin@lumbermensco.com Phone: 703 made the888-401-6367 best valued logEXT splitter.

OR 931-797-8029 Handles logs up to 32”. Uses

vans and produce 6 - 8 loads per

but electronic option is available.

Item ID: 36406

with 1700 TED hours, in very good Contact:

drum design. Can easily load 42’ day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID Risley 13644. Sam x702 2 Rolly Item ID: 1993 FIREWOOD PROCESSORS

2010 Shop Built Contact: SAM Wood Processor Email: Sam@lumbermensco.com -Phone: It has a 353 Detroit diesel, 888-401-6367 EXT40702 inch insert tooth circle saw, 30 foot  Issue 364 391

Item ID: 60484 ‘16 Halverson H140 Contact: TED Skidsteer (DEMO) Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 Item ID: JW-909632

or (801) 319-9351

Contact: J Williams Ph: (888) 401-6367 x701

Cat 518 Grapple Skidder Item ID: 74169

Contact: SAM Email: Sam@lumbermensco.com ‘13 KMC 2500 Track Phone: 888-401-6367 EXT 702

Skidder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

‘99 Case 850G Long Track Dozer

2008 Cat Skid Steer 289C

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’ Feller Buncher

log deck. Has hydraulic Itema ID: 78672 grapple, chain and kicker that all runs off Contact: AUSTIN Email: Austin@lumbermensco.com of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703

unit.

Has aOR4’931-797-8029 chain saw that kicks

Lumbermens™  since 1986

❘

off onto a conveyor. This is a very

DeereItem 3754D well John built processor.

ID 13820.

Item ID: 45747 Sam x702 Firewood - This is Contact:Processor TED Email: Teds@lumbermensco.com aPhone: Chomper Model 16 PDA 888-401-6367 EXT 701

or (801) 319-9351 automatice firewood processor with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased

Prentice Loader new for $32,500.210E Item ID 13865.

Item ID: 79682

2004 Barko CAT 517 Grapple ‘93 180B Dozer Item ID: 70690

Item ID: 14077 Contact: Contact:SAM Austin Email: Sam@lumbermensco.com Ph: (888) 401-6367 x703 Phone: 888-401-6367 EXT 702

Diamond Z Track ‘95'18John Deere C6 Mounted Horizontal Grinder Item ID: 373 Tree Farmer

Contact: TED 13920 Item ID: Email: Teds@lumbermensco.com Contact: Austin Phone: 888-401-6367 EXT 701

or (801) 319-9351

Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp

motor, Rotobec continuous Cat 322CL Processor

Logmax 7000XT grapple, 5,000 original hours.

Item ID: 78834 (excellent condition.). Item ID Contact: SAM 13238.

Chris x700

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with

Prentice 1500 384 hours.

Knuckle approximately Hour

Contact: TED EQUIPMENT LOGGING Email: Teds@lumbermensco.com BANDIT EXT 701 Phone: 888-401-6367

or1900 (801)Tracked 319-9351 1999 Bandit Disc

Boom & Delimber meter dont work.

The last 2 owners Item ID: 49732 have only used it to load trucks or Contact: SAM as a backup as needed. Has a CTR Email: Sam@lumbermensco.com Phone: 888-401-6367 EXTrebuilt.

702 delimber, grapple has been

50% or better. 475 hp Cummins

Item ID 13694. Sam x702

Sam x702

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 -

PRENTICE 2210 3412 Caterpillar Diesel engine

Item ID: 7060 with 850 HP. 5300 hrs. Mill in Contact: AUSTIN good condition.

Just finished 10 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Acre clearing job, ready to work!

OR 931-797-8029 Remote control. Big production

 List  seLL  exchange  buy  save

Boom cylinders have minor leaks.

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702 Timberjack 360C Item BELL ID: 89706

1990 Bell Super T - This Bell has Contact: AUSTIN Email: Austin@lumbermensco.com aPhone: brand new Duetz engine.

888-401-6367 EXTLever 703

OR 931-797-8029 control, 33” bar, pump and tranny ❘

 LumbermensCO.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

Cat D6T XW Dozer Item ID: 27832

The Tree Contact: SAM Email: Sam@lumbermensco.com that Started Phone: 888-401-6367 EXT 702 it All!

Boonville, New York www.starwebhosting.net/woodsmen/ 08’ John Deere 437C

'09 John Deere 753J Buncher Item ID: 14106

Contact: AUSTIN Contact: AUSTIN Email: Austin@lumbermensco.com Hot Springs, Arkansas Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 www.arkloggers.com

OR 931-797-8029

931-797-8029

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

2012Woods John Deere 648H Publishing Price $45,000

ADVERTISING SALES

Contact: AUSTIN Morris Woods Email:(888) Austin@lumbermensco.com 401-6367 ext. 704 Phone: 888-401-6367 EXT 703 morris@lumbermens.co

931-797-8029

MARKETING DIRECTOR

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Timberjack 240

Item ID: 80318 MID-ATLANTIC

LOGGING & BIOMASS EXPO

Selma, North Carolina 234B 2014 Tigercat www.midatlantic-logging-biomass­ Item ID: 29966 expo.com/

Contact: AUSTIN Contact: AUSTIN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com KENTUCKY WOOD EXPO Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 Sept931-797-8029

931-797-8029 Fri, 15 - Sat, 16 Sept

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Contact: TED Austin Woods Email:(888) Teds@lumbermensco.com 401-6367EXT ext.701 703 Phone: 888-401-6367

or (801) 319-9351 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

JD Send 440B Cable Skidder address changes to:

Item ID: 47188 Lumberman's Exchange P.O. Box 1916 Contact: WES Columbia, TN 38402 Email: Wes@lumbermensco.com Phone: 888-401-6367 EXT 710 The Lumberman's OR 260-452-6055 Exchange is

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers Morbark 20 Lumberman's Chipharvester and writers, the ID: 38035 Exchange,Item its principles and associates, are not held liable for Contact: SAM errors or omissions.

Reproduction, Email: Sam@lumbermensco.com in whole or part, is prohibited with­ Phone: 888-401-6367 EXT 702 out written consent. ©2017 Woods Publishing

CAT 235 BZ Item ID: 1865

Cambridge, Ohio www.ohioforest.org

2009 Valmet 840.4 Item ID: 79249

** INFO LINK**

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701

or (801) 319-9351

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

2015 Cat 545D BANDMILLS & HEADSAWS Item ID: 45196

Danckaert Band Resaw - Roughly Contact: AUSTIN 10 hoursAustin@lumbermensco.com on this machine since it Email: Phone: 888-401-6367 EXT 703 has it has a 24foot in been rebuilt, 931-797-8029 feed deck 20 foot out feed deck

with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

Timberjack 240

is supported on both sides. This Cable Skidder Item accurate ID: 60608 is an extremely machine in ve1y good Contact: SAM condition, Cuts 130 Email: Sam@lumbermensco.com

feet a minute also has Phone: 888-401-6367 EXTCLT 702 presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Cat 518

Sam x702 Item ID: 28404

CARRIAGES & DRIVES

Contact: AUSTIN Email: Austin@lumbermensco.com 2010 Cardinal HD Carriage Phone: 888-401-6367 EXT 703

931-797-8029 Carriages (Sawmill) - Cardinal

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Prentice 384 w/ Bucksaw & Delimber Buck Equipment (AIM) ........ 36

Item ID: 14213 Corley Mfg .............................. 32 Contact: AUSTIN Email: Austin@lumbermensco.com CRD Metalworks .................... 25 Phone: 888-401-6367 EXT 703 CW Mill-ArmorHog OR 931-797-8029 .............. 17

John Deere 648H Morbark ..................................... 9 Grapple Skidder Multitek ...................................

12 Item ID: 96833

Contact: SAM Piper's Saw Shop.................... 13 Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 40 Rotochopper ............................

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler 2015 John.............................

Deere 848L14

Thomas Industrial Mulcher Controls..... 10 Forestry Item ID: Union Grove Saw &47228 Knife.. 2, 37

Item ID: 83128 Iron Bull ...................................

21 Contact: AUSTIN Kilgore Saw ............................. 22 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 ................................. 24 Lignomat 931-797-8029

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

2012 Barko 920

Contact:Refiner AUSTIN................... 23 Universal Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 WoodMizer ................................ l

931-797-8029

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom and 36" top saw Johnsaw Deere 648G3

Item ID: 99831

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

Barko 595Ml Tracked Item ID: 43774

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net 931-797-8029 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 21

L O G G I N G

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Sam Wall Grappleext. 702 (888) 401-6367 Item ID: 35810 sam@lumbermens.co

$46,500

SOUTHWEST FOREST PRODUCTS Item ID: 53095 EXPO Fri, 25 August - Sat, 26 August

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

John Deere 540B Item ID: 0908

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

John Deere 650H LGP Item ID: 84627

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

CatHalverson 939 Crawler Loader ‘16 H140 Item ID: 92188 Skidsteer (DEMO) Contact: SAM Item ID: JW-909632 Email: Sam@lumbermensco.com Phone: 888-401-6367 Contact: J Williams EXT 702

‘93 Barko 180B ‘03 John Deere 748GIII

Item ID:Item 14077 ID: 13851 Contact: Austin Contact: SAM Ph: (888) 401-6367 x703 Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Ph: (888) 401-6367 x701

Cat 535C Grapple Skidder Item ID: 50218

L O G G I N G

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

2007 Cat 517

John Deere 540D

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

Contact: SAM Email: Sam@lumbermensco.com ‘13 KMC 2500 EXT Track Phone: 888-401-6367 702

Item ID: 60554

Item ID: 83019

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 Risley Rolly x703 3 Item ID: 2390

with 1700 hours, in very good Contact: WES

Email: Wes@lumbermensco.com condition.

Easily produces high Phone: 888-401-6367 EXT 710

OR 260-452-6055 quality chips with patented ‘Cone’

drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644.230 SamCable x702 Skidder Timberjack Item ID: 51788 FIREWOOD PROCESSORS Contact: 2010 ShopTED Built Wood Processor Email: Teds@lumbermensco.com

EXT 701 -Phone: It has a888-401-6367 353 Detroit diesel, 40

or (801) 319-9351

inch insert tooth circle saw, 30 foot  Issue 364 391

Skidder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

2009 2384 Prentice Knuckleboom Loader

Item ID: 5613

off onto a conveyor. This is a very

83’ John Deere 740A

well built processor. Item ID 13820.

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 CTL 70 ‘05 Gehl 931-797-8029

Firewood Contact:Processor AUSTIN - This is Austin@lumbermensco.com aEmail: Chomper Model 16 PDA Phone: 888-401-6367 EXT 703

931-797-8029 automatice firewood processor

Item ID: 95074

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

95 Timberjack 450 Best Dual Value Portable Log Splitter Arch Skidder

2017 Tigercat 630E

Sam x702 Item ID: 84473

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased

new for170A $32,500.

ID 13865.

Serco Self Item Propelled Loader Item ID: 57111 Sam x702

Phone: 888-401-6367 or Uses (801) 319-9351 Handles logs upEXT to 701 32”.

LOGGING EQUIPMENT Contact: AUSTIN Email: Austin@lumbermensco.com BANDIT EXT 703 Phone: 888-401-6367

931-797-8029 1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

Item ID: 12270 - Small manufacturer in PA has

made the Contact: TEDbest valued log splitter.

Email: Teds@lumbermensco.com

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’ Cat D5H LGP Itema ID: 64808 grapple, log deck. Has hydraulic

chain and kicker that all runs off Contact: AUSTIN Email: Austin@lumbermensco.com of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703

931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 -

3412 Caterpillar engine 2013 John Diesel Deere 437D Item ID:hrs.

96805 with 850 HP. 5300 Mill in

good condition.

Just finished 10 Contact: AUSTIN Email: Austin@lumbermensco.com Acre clearing job, ready to work!

Phone: 888-401-6367 EXT 703

931-797-8029 Remote control. Big production

 List  seLL  exchange  buy  save

‘95John John Deere C6 Deere 540B Item ID: 6075 Tree Farmer

Contact: JOE13920 Item ID: Email: Joe@lumbermensco.com Contact: Austin EXT 709 Phone: 888-401-6367

OR 801-362-2170

Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

2003 Tigercat 250 Log Loader Item ID: 46268 (excellent condition.). Item ID

Contact: WALKER 13238.

Chris x700 Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 1995 Barko 775 B Feller Buncher - Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with

approximately 1500 hours.

Log Max 7000Hour Item ID: 96628 meter dont work. The last 2 owners have only used it to load trucks or Contact: AUSTIN Email: Austin@lumbermensco.com as a backup as needed. Has CTR Phone: 888-401-6367 EXTa703

931-797-8029 delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

Tigercat 630C Item BELL ID: 83971

1990 Bell Super T - This Bell has Contact: AUSTIN Email: Austin@lumbermensco.com aPhone: brand new Duetz engine.

888-401-6367 EXTLever 703

931-797-8029 control, 33” bar, pump and tranny ❘

 LumbermensCO.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

1997 Timberjack 460 Cable Skidder

Item ID: 91657

Item ID:24393

The Tree

Contact: WALKER Email: Walker@lumbermensco.com that Started Phone: 888-401-6367 EXT 707

it All!

Morris Woods Contact: TED Email:(888) Teds@lumbermensco.com 401-6367 ext. 704 Phone: 888-401-6367 EXT 701 morris@lumbermens.co

or (801) 319-9351

SOUTHWEST FOREST PRODUCTS Item ID: 52045 EXPO Fri, 25 August - Sat, 26 August Contact: AUSTIN

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

Hot Springs, Arkansas Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.arkloggers.com

OR 931-797-8029

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER Woods Publishing Tree Farmer Grapple - Cable Skidder Item ID: 37092 ADVERTISING SALES

Peterson Chipper

Timberjack 460 Dual Arch

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Clark 667

Item ID: 59500 MID-ATLANTIC

LOGGING & BIOMASS EXPO

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

Selma, JD North Carolina 437D loader www.midatlantic-logging-biomass­ Item ID: 35922 expo.com/

MARKETING DIRECTOR

Contact: TED Email: Teds@lumbermensco.com KENTUCKY WOOD EXPO Phone: 888-401-6367 EXT 701

or (801) 319-9351

Fri, 15 Sept - Sat, 16 Sept

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall John Deere 440C (888) 401-6367 ext.Cable 702 Skidder sam@lumbermens.co

Item ID: 30080 Austin Woods

Contact: SAM401-6367 ext. 703 (888) Email: Sam@lumbermensco.com austin@lumbermens.co Phone: 888-401-6367 EXT 702

MAILING ADDRESS

John Deere 437D Log Loader Item ID: 8834

Cambridge, Ohio www.ohioforest.org

‘06 CAT 517

Item ID: 13869

** INFO LINK**

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

2054 John Deere Processor Log Loader

BANDMILLS & HEADSAWS Item ID: 73244

Danckaert Band Resaw - Roughly Contact: AUSTIN

10 hours on this machine since it Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

has been rebuilt, it has a 24foot in

OR 931-797-8029 feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides.

Top Casting Transport Trailers Custom Logwheel Pup is supported on both sides. This Item ID: JW-538174

is an extremely accurate machine Contact: SAM in ve1y Sam@lumbermensco.com good condition, Cuts 130 Email: Phone: 888-401-6367 EXT 7021 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to240B run. Item ID 13434.

Tigercat Knuckle

Sam x702Boom Loader Item ID: 76297

CARRIAGES & DRIVES

Contact: SAM 2010 Cardinal HD Carriage Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 Carriages (Sawmill) - Cardinal

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

May be sent to­ morris@lumbermens.co

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

POSTMASTER

Brute Force Mfg. ..................... 31

John Deere 750J Buck Equipment (AIM) ........ 36 Forestry Dozer

Midwest Sharpening.............. 26

carriage knees, husk including

Corley Mfg 32 Item..............................

ID: 62252

John Deere 640 9 Morbark .....................................

Item ID: 92152 Multitek ................................... 12

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

Send Acculoader address changes to: Item ID: 28991 Lumberman's Exchange P.O. Box 1916 Contact: AUSTIN Columbia, TN 38402 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 The Lumberman's OR 931-797-8029 Exchange is

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers Hood 28000 and writers, the Lumberman's Item ID: 18775 Exchange, its principles and associates, are not held liable for Contact: AUSTIN Reproduction, errors or omissions.

Email: Austin@lumbermensco.com in whole or part, is prohibited with­ Phone: 888-401-6367 EXT 703 consent. out written 931-797-8029 ©2017 Woods Publishing

Contact: JOE

Email: Joe@lumbermensco.com Piper's Saw Shop.................... 13

CRD Metalworks .................... 25 Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 CW Mill-ArmorHog .............. 17

OR ............................

801-362-2170 Rotochopper 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler .............................

John Deere 437D 14 Item ID: 10075 Iron Bull ................................... 21 Contact: AUSTIN Kilgore Saw ............................. 22 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 ................................. 24 Lignomat 931-797-8029

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Phone: 888-401-6367 EXT 709

Barko 180B Thomas‘93 Industrial Controls ..... 10 Item ID: 14077 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Email: Austin@lumbermensco.com Universal Refiner ................... 23 Phone: 888-401-6367 EXT 703

OR 931-797-8029 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" and 36" top saw '13bottom KMC saw 2500 Tack Skidder Item ID: 14078

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

2013 John Deere 748H Item ID: 85729

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net 931-797-8029 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 23

L O G G I N G

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams FEATURED! (888) HOT-BUY! 401-6367 ext. 701 j@lumbermens.co

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Tigercat T240B

John Deere 540G3 Item ID: 92115

Item ID: 4266

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

Cat 573

Item ID: 59580 ‘16 Halverson H140 Contact: AUSTIN Skidsteer (DEMO) Email: Austin@lumbermensco.com Phone: 888-401-6367 Item ID: JW-909632 EXT 703 Contact: ORJ Williams 931-797-8029

1988 John Deere ‘93 Barko 180B540D Item ID: 727

Item ID: 14077 Contact: Contact:AUSTIN Austin Email: Austin@lumbermensco.com Ph: (888) 401-6367 x703 Phone: 888-401-6367 EXT 703

931-797-8029

Ph: (888) 401-6367 x701

Tigercat 630 C Dual Arch

Timbco 425B

Item ID: 10836

L O G G I N G

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701

or (801) 319-9351

Item ID: 74779

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709

OR 801-362-2170

BARKO 495ML Item ID: 33905

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709

OR 801-362-2170

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

1991 Timberjack 450B Item ID: 1826

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) x703 2015401-6367 Cat 563C Item ID: 72531

with 1700 hours, in very good Contact: AUSTIN Email: Austin@lumbermensco.com condition.

Easily produces Phone: 888-401-6367 EXThigh 703

OR with 931-797-8029 quality chips patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

Timberjack 380C FIREWOOD PROCESSORS Item ID: 72259

2010 Shop Built Wood Processor Contact: WALKER -Email: It has Walker@lumbermensco.com a 353 Detroit diesel, 40 Phone: 888-401-6367 EXT30 707 inch insert tooth circle saw, foot  Issue 364 391

John Deere 648l Item ID: 96378

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Excavator 330Lx Link Belt

Best ValueItem Portable Log Splitter ID: 70897 AUSTIN -Contact: Small manufacturer in PA has

Email: Austin@lumbermensco.com Phone:the 888-401-6367 EXTlog 703 splitter. made best valued

OR 931-797-8029

well built processor. Item ID 13820.

Timbco 445 EXL

Sam x702 Item ID: 87930

Firewood Processor - This is Contact: JOE

Firewood Processor - This is a

‘00 Timbco homemade processor 445D with a 10’

Item ID: 14096 log deck. Has a hydraulic grapple, Contact: AUSTIN chain and kicker that all runs off Email: Austin@lumbermensco.com Phone: 888-401-6367 703 of a 4 cylinder MercedesEXT power

OR 931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

2008 Barko 495 ML

grapple, 5,000 hours.

Itemoriginal ID: 7648

on injection pump. always started

tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Timbco Sam x702 425EXL Barsaw Item ID: 74878 LOGGING EQUIPMENT Contact: SAM BANDIT Email: Sam@lumbermensco.com

50% or better. 475 hp Cummins

Value! PA. Item ID 12062. Sam x702

Ph: (888) 401-6367 x703

low hours. Control panel includes

with John Deere power unit with

but electronic option is available.

adjustable to single two way. Great

Contact: AUSTIN Item ID: 13920 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Contact: Austin

OR 931-797-8029

ORfirewood 801-362-2170 automatice processor

1999 Bandit 1900 TrackedEXT Disc Phone: 888-401-6367 702

Has Log Lift. Uses 4-way wedge

ID: 51519 TreeItem Farmer

(excellent Contact:condition.).

AUSTIN Item ID Email:Chris Austin@lumbermensco.com 13238. x700 Phone: 888-401-6367 EXT 703

931-797-8029 1995 Barko 775 B Feller Buncher

Joe@lumbermensco.com aEmail: Chomper Model 16 PDA Phone: 888-401-6367 EXT 709

Handles logs up to 32”. Uses

13HP Honda motor. Manual start

‘95Loader/ JohnExcavator Deere 225 C6LC Log

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 -

3412 Diesel engine '01Caterpillar John Deere 648G3 Item ID:hrs.

90899 with 850 HP. 5300 Mill in good condition.

Contact: SAM Just finished 10 Email: Sam@lumbermensco.com Acre clearing job, ready to work!

Phone: 888-401-6367 EXT 702 Remote control. Big production

 List  seLL  exchange  buy  save

- Pumps recently redone. 400 hrs

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with

540B John DeereHour approximately 1500 hours.

Cable Skidder

meter dont work. The last 2 owners Contact: WALKER have used it to load trucks or Email:only Walker@lumbermensco.com

Phone: 888-401-6367 707 as a backup as needed.EXT Has a CTR or 931-797-3915

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

John Deere 648E ItemBELL ID: 6603

1990 Bell Super T - This Bell has Contact: AUSTIN Austin@lumbermensco.com aEmail: brand new Duetz engine.

Phone: 888-401-6367 EXTLever 703

931-797-8029 control, 33” bar, pump and tranny ❘

 LumbermensCO.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

CAT 518 (’88) Item ID: 90569

Contact: JOE The Tree Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 that Started

OR 801-362-2170

it All!

Boonville, New York www.starwebhosting.net/woodsmen/

2001 John Deere 435 Item ID: 7100

Contact: AUSTIN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Hot Springs, Arkansas Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703

931-797-8029 www.arkloggers.com

OR 931-797-8029

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

JD 640 (’80) Woods Publishing Item ID: 93988

ADVERTISING SALES

Contact: JOE Morris Woods Email: Joe@lumbermensco.com (888) 401-6367EXT ext.709 704 Phone: 888-401-6367 morris@lumbermens.co

OR 801-362-2170

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Selma, Timberpro North Carolina620 Tigercat 845 www.midatlantic-logging-biomass­ Item ID: 79674 Item ID: 8139 MID-ATLANTIC

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

FEATURED!

Donna Heninger

Sam Wall JD401-6367 540A (‘76) (888) ext. 702 Item ID: 3526 sam@lumbermens.co Contact: JOE Austin Woods Email:(888) Joe@lumbermensco.com 401-6367 ext. 703 Phone: 888-401-6367 EXT 709 austin@lumbermens.co

OR 801-362-2170

MAILING ADDRESS

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR EQUIPMENT REPS

expo.com/

LOGGING & BIOMASS EXPO

Contact: AUSTIN Contact: AUSTIN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com WOOD EXPO Phone: 888-401-6367 EXT 703 KENTUCKY Phone: 888-401-6367 EXT 703

931-797-8029 Sept931-797-8029 Fri, 15 - Sat, 16 Sept

Tracked Log Picker/ Skidder Equipment Item ID: 99859

Cambridge, Ohio www.ohioforest.org

VALMET 840.2 FORWARDER Item ID: 9770

** INFO LINK**

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

CAT 525C

Item ID: 4091 BANDMILLS & HEADSAWS

Danckaert Resaw - Roughly Contact: Band AUSTIN Email: Austin@lumbermensco.com 10 hours on this machine since it Phone: 888-401-6367 EXT 703

931-797-8029 has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

Excavator w/Ryan DS 28 Felling Head

is supported on both sides. This Item ID: 76226 isContact: an extremely accurate machine TED Email: in ve1yTeds@lumbermensco.com good condition, Cuts Phone: 888-401-6367 EXT 701 130

a minute or (801) feet also319-9351 has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run.Grapple Item ID 13434.

Cat 525D

w/Winch Sam skidder x702 Item ID: 99857 CARRIAGES & DRIVES Contact: SAM HD Carriage 2010 Cardinal Email: Sam@lumbermensco.com

Phone: 888-401-6367 702 Carriages (Sawmill)EXT - Cardinal

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

May be sent to­ morris@lumbermens.co

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

POSTMASTER

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

BELL TRACKED (1993) Buck Equipment (AIM) ........ 36

P.O. MOST WANTED! Columbia,

Box 1916 TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

Cat 527 Swingboom Send address changes to: Grapple Skidder Dozer Lumberman's Exchange Item P.O. ID: Box99841 1916

TN 38402 Contact:Columbia, SAM Email: Sam@lumbermensco.com Phone: 888-401-6367Exchange EXT 702 is The Lumberman's

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of contentPrentice submitted by 210E advertisers and writers, the ID: Lumberman's Item 8256 Exchange, its principles and Contact: associates,JOE are not held liable for Email: Joe@lumbermensco.com errors or omissions. Reproduction, Phone: EXT 709 in whole888-401-6367 or part, is prohibited with­ out written 801-362-2170 consent. ©2017 Woods Publishing

Item ID: 54265 Corley Mfg .............................. 32 Contact: JOE Email: Joe@lumbermensco.com CRD Metalworks .................... 25 Phone: 888-401-6367 EXT 709 CW Mill-ArmorHog 801-362-2170 .............. 17

Prentice 2190 9 Morbark .....................................

Item ID: 28889 Multitek ................................... 12 Contact: AUSTIN Email: Austin@lumbermensco.com Piper's Saw Shop.................... 13 Phone: 888-401-6367 EXT 703

931-797-8029 Rotochopper ............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

460 (1997) Hurst JD Boiler .............................

14

Item ID: 1095 Iron Bull ................................... 21 Contact: JOE Email: Joe@lumbermensco.com Kilgore Saw ............................. 22 Phone: 888-401-6367 EXT 709 Lignomat 801-362-2170 ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Thomas Industrial ..... 10 Serco 7000Controls Loader

Item ID:&40498 Union Grove Saw Knife.. 2, 37 Contact: AUSTIN Universal Refiner ................... 23 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

WoodMizer l

OR................................

931-797-8029

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw Morbark 30XL Item ID: 13937

STACKING RAC

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Hydro Ax 611E Item ID: 58544

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net 931-797-8029 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 25

L O G G I N G

MARKETING DIRECTOR

98’ Timberjack 240 C

Item ID: 99838 EXPO SOUTHWEST FOREST PRODUCTS Fri, 25 August Sat, Contact: AUSTIN 26 August

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

John Deere 548D

John Deere 640D

Item ID: 64196

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

Item ID: 99845

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

OR 931-797-3915

Franklin 170

L O G G I N G

Item ID: 99839 ‘16 Halverson H140 Contact: AUSTIN (DEMO) Skidsteer Email: Austin@lumbermensco.com Phone: EXT 703 Item 888-401-6367 ID:ORJW-909632

931-797-8029

Contact: J Williams Ph: (888) 401-6367 x701

John Deere 650H

CAT 515

Item ID: 50512

Item ID: 99827

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

OR 931-797-3915

Cat D6K2 XL

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

Item ID: 99856 Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

OR 931-797-3915

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

'93 John Deere 548E

Prentice 180

well built processor. Item ID 13820.

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 CTL 70 ‘05 Gehl 931-797-8029

Firewood Contact:Processor AUSTIN - This is Austin@lumbermensco.com aEmail: Chomper Model 16 PDA Phone: 888-401-6367 EXT 703

931-797-8029 automatice firewood processor

Item ID: 14184

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) x703 John 401-6367 Deere 650G Item ID: 99852

Item ID: 7822

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644.

Sam525 x702 CAT

Item ID: 99853 FIREWOOD PROCESSORS

2010 Shop Built Wood Processor Contact: WALKER Email: Walker@lumbermensco.com

-Phone: It has a888-401-6367 353 DetroitEXT diesel, 707 40

OR 931-797-3915

inch insert tooth circle saw, 30 foot  Issue 364 391

tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased

Chipper - Cat Under Carriage at

but electronic option is available.

day. Item ID 13882. Austin x703

low hours. Control panel includes

13HP Honda motor. Manual start

vans and produce 6 - 8 loads per

drum design. Can easily load 42’

with John Deere power unit with

new for $32,500. Item ID 13865.

TimberPro 735B Item ID: 52609 Sam x702

quality chips with patented ‘Cone’

Email: Walker@lumbermensco.com condition.

Easily produces Phone: 888-401-6367 EXT 707 high

OR 931-797-3915

Sam x702 Item ID: 17058

Boom BestKnuckle Value Portable LogLoader Splitter

13916.

Austin x703 2011 437D John Deere

Item ID: 52342 - Small manufacturer in PA has Contact: WALKER Email:the Walker@lumbermensco.com made best valued log splitter.

Phone: 888-401-6367 EXT 707 Handles logs up to 32”. Uses

with 1700WALKER hours, in very good Contact:

Tigercat 615C

Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Cat 517with a 10’ homemade processor

Item ID: 20725 log deck. Has a hydraulic grapple, Contact: AUSTIN chain kicker that all runs off Email:and Austin@lumbermensco.com Phone: 888-401-6367 703 of a 4 cylinder MercedesEXT power

931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Contact: JOE EQUIPMENT LOGGING Email: Joe@lumbermensco.com BANDIT EXT 709 Phone: 888-401-6367

OR1900 801-362-2170 1999 Bandit Tracked Disc 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine JD 550K (2015) Item ID:hrs.

92495 with 850 HP. 5300 Mill in

Contact: JOE Just finished 10 good condition.

Email: Joe@lumbermensco.com Acre clearing job, ready to work!

Phone: 888-401-6367 EXT 709

OR 801-362-2170 Remote control. Big production

 List  seLL  exchange  buy  save

Prentice 950B ‘9307 Barko 180B Item ID: 5368

Item ID: 14077 Contact: AUSTIN Contact: Austin Email: Austin@lumbermensco.com Ph: (888) 401-6367 x703 Phone: 888-401-6367 EXT 703

931-797-8029

‘95 Deere700J C6 09’John John Deere Item ID: 48601 Tree Farmer

Contact: ItemAustin@lumbermensco.com ID:AUSTIN 13920 Email: Contact: Austin EXT 703 Phone: 888-401-6367 Ph: (888) 931-797-8029 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

96’ Hydro ax 611E

grapple, 5,000 hours.

Itemoriginal ID: 4654

(excellent Contact:condition.).

AUSTIN Item ID Email:Chris Austin@lumbermensco.com 13238. x700 Phone: 888-401-6367 EXT 703

931-797-8029 1995 Barko 775 B Feller Buncher - Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with

approximately 1500 hours.

Franklin Q70 Hour Item ID: 5458 meter dont work. The last 2 owners Contact: AUSTIN have only used it to load trucks or Email: Austin@lumbermensco.com as a backup as needed. Has CTR Phone: 888-401-6367 EXTa703

931-797-8029 delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam

TIMBERJACK 460D / 648G III x702 Item ID: 34900

BELL

Contact: JOE 1990 Bell Super T - This Bell has Email: Joe@lumbermensco.com 888-401-6367 EXT 709 aPhone: brand new Duetz engine.

Lever

OR 801-362-2170

control, 33” bar, pump and tranny ❘

 LumbermensCO.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

Timbco 425 Item ID: 5627

Contact: JOE The Tree Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 that Started

OR 801-362-2170

it All!

Boonville, New York www.starwebhosting.net/woodsmen/ Treefarmer C7T GM JD 648 G3 Grapple Skidder Grapple/Winch Skidder Item ID: 4572

SOUTHWEST FOREST PRODUCTS Item ID: 11726 EXPO Fri, 25 August - Sat, 26 August

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701

or (801) 319-9351

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

2001 Cat 311CU Processor/ Woods Publishing Harvestor Fabtech head ADVERTISING SALES Item ID:Woods 99821 Morris

(888) Contact: TED 401-6367 ext. 704 Email: Teds@lumbermensco.com Phone:morris@lumbermens.co 888-401-6367 EXT 701 or (801) 319-9351

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Prentice 2432 (’09) Item ID: 89885

MID-ATLANTIC

Selma, North155B Carolina Franklin Forwarder www.midatlantic-logging-biomass­ Item ID: 10700 expo.com/

LOGGING & BIOMASS EXPO Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709

801-362-2170

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Contact: AUSTIN Austin Woods Email:(888) Austin@lumbermensco.com 401-6367 ext. 703 Phone: 888-401-6367 EXT 703 austin@lumbermens.co

931-797-8029

MAILING ADDRESS

Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Sam Wall ‘00 Timberjack 1110 (888) 401-6367 ext.

702 Item ID: 14033 sam@lumbermens.co

Contact: TED Email: Teds@lumbermensco.com KENTUCKY WOOD EXT EXPO Phone: 888-401-6367 701

or (801) 319-9351

JD 848H (‘08) Item ID: 8810

Cambridge, Ohio PARTS Timberjack 450 C www.ohioforest.org

Cable Skidder Item ID: 5077

** INFO LINK**

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709

801-362-2170

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701

or (801) 319-9351

96’ John Deere 643D

BANDMILLS & 14207 HEADSAWS Item ID:

Danckaert Resaw - Roughly Contact: Band AUSTIN Email: 10 hoursAustin@lumbermensco.com on this machine since it Phone: 888-401-6367 EXT 703 been rebuilt, 931-797-8029 has it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

Hydro Ax 411

is supported onID: both sides. This Item 98954

is an extremely accurate machine Contact: AUSTIN Email: in ve1y Austin@lumbermensco.com good condition, Cuts 130 Phone: 888-401-6367 EXT 703 feet also has CLT presses. a minute 931-797-8029 Item ID 13876. Austin x703

S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CAT 140G

Item ID: 93592

CARRIAGES & DRIVES

Contact: AUSTIN

Email:Cardinal Austin@lumbermensco.com 2010 HD Carriage Phone: 888-401-6367 EXT 703

OR 931-797-8029 Carriages (Sawmill) - Cardinal

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

May be sent to­ morris@lumbermens.co

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

POSTMASTER

Brute Force Mfg. ..................... 31

carriage knees, husk including

Prentice (AIM) 210 E ........ 36 Buck Equipment Item ID: 98009 Corley Mfg .............................. 32

Midwest Sharpening.............. 26

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

848Send G Grapple Skidder address changes to:

Item ID: 85843 Lumberman's Exchange P.O. Box 1916 Contact: TED Email: Teds@lumbermensco.com Columbia, TN 38402

Phone: 888-401-6367 EXT 701

or (801) 319-9351 The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submittedC5D by advertisers Treefarmer Skidder and writers, the Lumberman's Item ID: 17115 Exchange, its principles and associates,TED are not held liable for Contact: errors or omissions. Reproduction, Email: Teds@lumbermensco.com Phone: EXT 701 in whole888-401-6367 or part, is prohibited with­ out written orconsent.

(801) 319-9351

©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

1994 2409B Mor barkTimberjack .....................................

Item ID:74044 Multitek ................................... 12 Contact: WALKER Piper's Saw Shop.................... 13 Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 Rotochopper ............................

40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Contact: TED Email: CRDTeds@lumbermensco.com Metalworks .................... 25 Phone: 888-401-6367 EXT 701

or (801) 319-9351

Hurst2011 Boiler .............................

14 Cat 525C Item ID: 26688 Iron Bull ................................... 21 Contact: AUSTIN Kilgore Saw ............................. 22 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 ................................. 24 Lignomat 931-797-8029

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

'04 John Deere 700H Thomas Industrial Controls ..... 10 Item ID: 14187 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Email: Austin@lumbermensco.com Universal Refiner ................... 23 Phone: 888-401-6367 EXT 703

931-797-8029 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

John Deere 648G3 Grapple Skidder Item ID: 51014

STACKING RAC

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

2010 Tigercat 724E Item ID: 14247

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net OR 931-797-8029 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 27

L O G G I N G

MARKETING DIRECTOR

EQUIPMENT REPS

Contact: TED

Hot Springs, Arkansas Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 www.arkloggers.com

or (801) 319-9351

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Timbco 425Exl

Hydro AX 721E

Item ID: 84253

Item ID: 99826

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

Item ID: 25974

‘16 Halverson H140 Contact: SAM Skidsteer (DEMO) Email: Sam@lumbermensco.com Item ID: JW-909632 EXT 702 Phone: 888-401-6367 Contact: J Williams Ph: (888) 401-6367 x701

Barko 495B

John Deere 648G3

‘89 Timberjack 380A

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 703 ‘13 KMC 2500 EXT Track

931-797-8029

Item ID: 58995

Item ID: 44764

L O G G I N G

Log Loader

Item ID: 14039

Skidder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

Tigercat 604 Cable Skidder Item ID: 6552

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

1998 Timberjack 360

Item ID: 8121 with 1700 hours, in very good Contact: Easily WALKER condition. produces high Email: Walker@lumbermensco.com Phone:chips 888-401-6367 EXT‘Cone’ 707 quality with patented drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

'97 Hydro AX-411 EXx702 Bar Saw Head Item ID 13644.

Sam Item ID: 98754

FIREWOOD PROCESSORS

Contact: SAM Wood Processor 2010 Shop Built Email: Sam@lumbermensco.com -Phone: It has a 353 Detroit diesel, 888-401-6367 EXT40702 inch insert tooth circle saw, 30 foot  Issue 364 391

CAT 525C

Item ID: 13443 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. x703 ‘98Austin 611 Ex-Hydro Ax Item ID: 13948 Best Value Portable Log Splitter

Timberpro TL735B well built processor.

ItemTracked ID 13820.

Sam x702Feller Buncher

Item ID: 64107 Firewood Processor - This is Contact: SAM

aEmail: Chomper Model 16 PDA Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased

‘85 440D new forJohn $32,500.Deere Item ID 13865.

Item ID: 12453

-Contact: Small manufacturer AUSTIN in PA has Email: Austin@lumbermensco.com made the888-401-6367 best valued logEXT splitter.

Phone: 703

OR up 931-797-8029 Handles logs to 32”. Uses

Sam x702 Contact: AUSTIN LOGGING EQUIPMENT Email: Austin@lumbermensco.com Phone: 888-401-6367 BANDIT EXT 703

OR 931-797-8029 1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

2011 CAT 525C homemade processor with a 10’

Item ID: 14203 log deck. Has a hydraulic grapple, Contact: AUSTIN chain kicker that all runs off Email:and Austin@lumbermensco.com Phone: 888-401-6367 703 of a 4 cylinder MercedesEXT power

931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 -

Tigercat 3412 ‘05 Caterpillar Diesel 230B engine

Item ID: 13911 with 850 HP. 5300 hrs. Mill in Contact: AUSTIN good condition.

Just finished 10 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Acre clearing job, ready to work!

OR 931-797-8029 Remote control. Big production

 List  seLL  exchange  buy  save

725B ‘93TimberPro Barko 180B Item ID: 20976

Item ID: 14077 Contact: JOE Contact: Austin Email: Joe@lumbermensco.com Ph: (888) 401-6367 x703 Phone: 888-401-6367 EXT 709

OR 801-362-2170

‘95 John Cable Deere SkidderC6 Item ID: 5597 Tree Farmer

Contact: AUSTIN Item ID: 13920 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Contact: Austin

OR 931-797-8029

Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous JD 648H (’08)

grapple, 5,000 hours.

Itemoriginal ID: 6051

(excellent condition.). Item ID Contact: JOE Email: Joe@lumbermensco.com 13238.

Chris x700

Phone: 888-401-6367 EXT 709

OR 801-362-2170 1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with

approximately hours. Hour 648 G1500 Skidder Item ID: 76963 meter dont work. The last 2 owners have onlyTED used it to load trucks or Contact: Email: Teds@lumbermensco.com

as a backup as needed.

Has a CTR Phone: 888-401-6367 EXT 701

or (801) 319-9351 delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702 John Deere 640D Item ID:63000

BELL

Contact: WALKER 1990 Bell Super T - This Bell has Email: Walker@lumbermensco.com aPhone: brand new Duetz engine.

888-401-6367 EXTLever 707 control, 33” bar, pump and tranny ❘

 LumbermensCO.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York

2003 CAT 525B Item ID: 3800

The Tree

Contact: WALKER that Started Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

it All!

JD 640D (’95) www.starwebhosting.net/woodsmen/ CAT 525D Item ID: 51746

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709

801-362-2170

‘80Woods John Deere 550 Publishing Item ID: 14037

ADVERTISING SALES

Contact: AUSTIN Morris Woods Email:(888) Austin@lumbermensco.com 401-6367 ext. 704 Phone: 888-401-6367 EXT 703 morris@lumbermens.co

931-797-8029

Email: Joe@lumbermensco.com Hot Springs, Arkansas Phone: 888-401-6367 EXT 709 www.arkloggers.com

OR 801-362-2170

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Item ID: 9555 EXPO SOUTHWEST FOREST PRODUCTS Fri, 25 August Sat, 26 August Contact: JOE

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Tigercat 234B Knuckle Selma, ‘80North JohnCarolina Deere 540B boom loader www.midatlantic-logging-biomass­ Item ID: 11345 MID-ATLANTIC Item ID: 99820

expo.com/ Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 KENTUCKY WOOD EXPO

OR 931-797-8029

LOGGING & BIOMASS EXPO

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Wall437C John Sam Deere

(888)Item 401-6367 ext. 702 ID: 1020 sam@lumbermens.co

Contact: AUSTIN Austin Woods Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (888) 401-6367 ext.

703

OR 931-797-8029 austin@lumbermens.co

MAILING ADDRESS

‘80 John Deere 550 Item ID: 14037

Cambridge, Ohio www.ohioforest.org

648 E Cable Skidder Item ID: 87791

** INFO LINK**

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701

or (801) 319-9351

John Deere 548G3

BANDMILLS & HEADSAWS Item ID: 985

Danckaert Band Resaw - Roughly Contact: AUSTIN Email: Austin@lumbermensco.com 10 hours on this machine since it Phone: 888-401-6367 EXT 703 has it has a 24foot in been rebuilt, OR 931-797-8029 feed deck 20 foot out feed deck

with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

‘05 Timberjack 608B

is supported onID: both sides. This Item 13898 is an extremely accurate machine Contact: SAM in ve1y Sam@lumbermensco.com good condition, Cuts 130 Email: Phone: 888-401-6367 EXT 702 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Timberjack 1270C

Sam x702 Item ID: 8676

CARRIAGES & DRIVES

Contact: JOE

Email: Joe@lumbermensco.com 2010 Cardinal HD Carriage Phone: 888-401-6367 EXT 709

OR 801-362-2170 Carriages (Sawmill) - Cardinal

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

May be sent to­ morris@lumbermens.co

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

POSTMASTER

Cat D4H TSK Grapple w/ Buck Equipment (AIM) ........ 36 Winch Equipment

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

John Deere Logger Send address changes to:

Item ID: 82959 Lumberman's Exchange P.O. Box 1916 Contact: SAM Columbia, TN 38402

Email: Sam@lumbermensco.com Phone: 888-401-6367 EXTis702 The Lumberman's Exchange

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content

by Grapple advertisers Cat submitted D5H TSK and writers, the Lumberman's Winch Dozer Exchange, its principles and Item ID:held 99809 associates, are not liable for errors or omissions. Reproduction, Contact: SAM in whole or part, is prohibited with­ Email: Sam@lumbermensco.com out written consent. EXT 702 Phone: 888-401-6367 ©2017 Woods Publishing

FEATURED HOT-BUY!

CW Mill-ArmorHog .............. 17

425D MorbarkTimbco .....................................

9 Item ID: 98053 Multitek ................................... 12 Contact: AUSTIN Email: Austin@lumbermensco.com Piper's Saw Shop.................... 13 Phone: 888-401-6367 EXT 703

931-797-8029 Rotochopper ............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Item..............................

ID: 99843 Corley Mfg 32

Contact: SAM CRD Metalworks .................... 25 Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

John 85D 14 Hurst BoilerDeere .............................

Item ID: 48169 Iron Bull ................................... 21 Contact: AUSTIN Email: Austin@lumbermensco.com Kilgore Saw ............................. 22 Phone: 888-401-6367 EXT 703 Lignomat 931-797-8029 ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

John Deere 700H Thomas Industrial Controls ..... 10 Item ID: 1324 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Email: Austin@lumbermensco.com Universal Refiner ................... 23 Phone: 888-401-6367 EXT 703

931-797-8029 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw andIII 36"(’03) top saw JD 648G Item ID: 36067

STACKING RAC

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709

OR 801-362-2170

‘08 John Deere 335C Item ID: 14089

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net OR 931-797-8029 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 29

L O G G I N G

MARKETING DIRECTOR

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

07’ Tigercat 724E

John Deere 850K LGP

Item ID: 14218

Item ID: 99814

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

John Deere 540G2 Cable Skidder Item ID: 53891

L O G G I N G

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

‘02 Jackson Shavings Mill Item ID: 13736

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

2011 John Deere 648H Item ID: 14217

‘16 Halverson H140

Contact: AUSTIN Skidsteer (DEMO) Email: Austin@lumbermensco.com Phone: 888-401-6367 JW-909632 EXT 703 Item ID: 931-797-8029

Contact: J Williams Ph: (888) 401-6367 x701

2004 Timbco 445EXL Item ID: 14170

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 703 ‘13 KMC 2500 EXT Track

931-797-8029

Skidder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

2016 Tigercat 604 E Cable Skidder

532 CAT Feller Buncher

well builtTimbco processor.820D Item ID 13820.

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 ‘05 Gehl OR 931-797-8029 CTL 70

Firewood Contact:Processor AUSTIN - This is Email: Austin@lumbermensco.com aPhone: Chomper Model 16 PDA 888-401-6367 EXT 703

931-797-8029 automatice firewood processor

Item ID:55393

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) x703 16’ 401-6367 CAT 545D Item ID: 14211

with 1700 hours, in very good Contact: AUSTIN Email: Austin@lumbermensco.com condition.

Easily produces Phone: 888-401-6367 EXThigh 703

931-797-8029 quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

93’ Prentice Item ID 13644.

Sam x702210 Item ID: 14216 FIREWOOD PROCESSORS

Contact: AUSTIN 2010 Shop Built Wood Processor Email: Austin@lumbermensco.com 888-401-6367 EXT40703 -Phone: It has a 353 Detroit diesel,

931-797-8029 inch insert tooth circle saw, 30 foot  Issue 364 391

Item ID: 14079

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916.

10’Austin Johnx703 Deere 648H ID: 14210 Best ValueItem Portable Log Splitter

-Contact: Small manufacturer AUSTIN in PA has Email: Austin@lumbermensco.com made the888-401-6367 best valued logEXT splitter.

Phone: 703

931-797-8029 Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available.

Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’ 12’ John Deere 437D Itema ID: 14209 grapple, log deck. Has hydraulic

chain and kicker that all runs off Contact: AUSTIN Email: Austin@lumbermensco.com of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703

931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Sam x702 Item ID: 18370

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased

John Deere 437E new for $32,500.

Item ID 13865.

Knuckleboom Loader Sam x702 Item ID: 63181 LOGGING EQUIPMENT Contact: SAM BANDIT Email: Sam@lumbermensco.com

Fabtek 344B ‘93 ‘04 Barko 180B

ID: JW-093430 Item Item ID: 14077 Contact:SAM Austin Contact: Ph: (888) 401-6367 x703 Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

John Deere 700K LGP ‘95 John Deere C6 Dozer Tree Farmer Item ID: 3674

Item ID: 13920 Contact: SAM Email: Sam@lumbermensco.com Contact: Austin Phone: 888-401-6367 EXT 702

Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp

motor, Rotobec continuous 07’ Tigercat 620C Itemoriginal ID: 14248 grapple, 5,000 hours.

(excellent Contact:condition.).

AUSTIN Item ID Email:Chris Austin@lumbermensco.com 13238. x700 Phone: 888-401-6367 EXT 703

931-797-8029 1995 Barko 775 B Feller Buncher - Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with

approximately hours.

Hour 12’ John 1500 Deere 843K Item ID: 14212 meter dont work. The last 2 owners

Phone: 888-401-6367 EXT 702 1999 Bandit 1900 Tracked Disc

have only used it to load trucks or Contact: AUSTIN Email: Austin@lumbermensco.com as a backup as needed. Has CTR Phone: 888-401-6367 EXTa703

931-797-8029 delimber, grapple has been rebuilt.

50% or better. 475 hp Cummins

Item ID 13694. Sam x702

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine JD 643G Item ID:hrs.

80565 with 850 HP. 5300 Mill in

Boom cylinders have minor leaks.

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702John

Deere 650H LGP Forestry BELLDozer Item ID: 99810

good condition.

Just finished 10 Contact: JOE

1990 Bell Super T - This Bell has

OR 801-362-2170 Remote control.

Big production

control, 33” bar, pump and tranny

Email: Joe@lumbermensco.com

Acre clearing job, ready work!

Phone: 888-401-6367 EXTto709

 List  seLL  exchange  buy  save

Contact: SAM

aEmail: brandSam@lumbermensco.com new Duetz engine. Lever Phone: 888-401-6367 EXT 702

❘

 LumbermensCO.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

Timberjack 380C Item ID: 410

Contact: AUSTIN The Tree Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 that Started

OR 931-797-8029

it All!

Boonville, New York www.starwebhosting.net/woodsmen/

90's Model Timberjack 240A Yanmar VIO27-2 mini-x Item ID: 14111 Item ID: 42920 EXPO SOUTHWEST FOREST PRODUCTS Fri, 25 August Sat, 26 August Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

John Deere 200D Woods Publishing Excavator

ADVERTISING SALES Item ID: 2959

Morris Woods Contact: SAM401-6367 ext. 704 (888) Email: Sam@lumbermensco.com morris@lumbermens.co Phone: 888-401-6367 EXT 702

Contact: SAM

Hot Springs, Arkansas Email: Sam@lumbermensco.com www.arkloggers.com Phone: 888-401-6367 EXT 702

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PRENTICE 410EX Item ID: 3280

MID-ATLANTIC

01’ Ponsee Forwarder Selma, North Bison Carolina Item ID: 14109 www.midatlantic-logging-biomass­ expo.com/ Contact: AUSTIN

LOGGING &JOE BIOMASS EXPO Contact: Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709

OR 801-362-2170

Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall Tigercat (888) 401-6367604 ext. 702 Item ID: 7436 sam@lumbermens.co

Contact: AUSTIN Austin Woods Email:(888) Austin@lumbermensco.com 401-6367 ext.

703 Phone: 888-401-6367 EXT 703 austin@lumbermens.co

931-797-8029

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

John Deere 650K LGP Send address changes to: Forestry Dozer Lumberman's Exchange Item P.O. ID: Box85213 1916

TN 38402 Contact:Columbia, SAM Email: Sam@lumbermensco.com Phone: 888-401-6367Exchange EXT 702 is The Lumberman's

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers Tigercat 830C and writers, the Lumberman's Leveling Cutter Exchange, its principles and Item ID:held 94337 associates, are not liable for errors or omissions. Reproduction, Contact: SAM in whole or part, is prohibited with­ Email: Sam@lumbermensco.com out written consent.EXT 702 Phone: 888-401-6367 ©2017 Woods Publishing

‘93 John Deere 548E Item ID: 14083

Cambridge, Ohio 540B John Deere www.ohioforest.org

Cable Skidder

** INFO LINK**

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 or 931-797-3915

Tigercat 234 Knuckle Boom Loader Item ID: BANDMILLS & 68516 HEADSAWS

Danckaert Band Resaw - Roughly Contact: SAM 10 hoursSam@lumbermensco.com on this machine since it Email: Phone: 888-401-6367 702 has been rebuilt, it has a EXT 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

Barko 160B Self-

is supported on bothLoader sides. This Propelled

Item accurate ID: 99812 is an extremely machine

in ve1y good Contact: SAM condition, Cuts 130 Email: Sam@lumbermensco.com

feet a minute also has Phone: 888-401-6367 EXTCLT 702 presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400

2012toCat hours ready run.D6K ItemXL ID 13434.

Item ID: 14169 Sam x702 Contact: AUSTIN& DRIVES CARRIAGES Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 2010 Cardinal HD Carriage

OR 931-797-8029 Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

CAT 559C

Buck Equipment (AIM) ........ 36 Item ID: 269 Corley Mfg .............................. 32

Contact: JOE Email: CRDJoe@lumbermensco.com Metalworks .................... 25 Phone: 888-401-6367 EXT 709 CW Mill-ArmorHog 801-362-2170 .............. 17

06’.....................................

Franklin Q80 9 Morbark Item ID: 14214 Multitek ................................... 12 Contact: AUSTIN Email: Saw Austin@lumbermensco.com Piper's Shop.................... 13 Phone: 888-401-6367 EXT 703

OR............................

931-797-8029 40 Rotochopper

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

‘89 CAT D4H LGP Hurst Boiler ............................. 14

Item ID: 13999 Iron Bull ................................... 21 Contact: AUSTIN Email: Austin@lumbermensco.com Kilgore Saw .............................

Phone: 888-401-6367 EXT 703 22

931-797-8029 Lignomat ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Thomas Industrial Controls ..... 10 Prentice 180E Loader

& CTR Union Grove Saw &saw Knife.. 2, 37 Item ID: 99822 Universal Refiner ................... 23

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" and 36" Skidder top saw JDbottom 648Gsaw Grapple Item ID: 54867

STACKING RAC

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701

or (801) 319-9351

Cat 515 Cable Skidder Item ID: 99873

Contact: SAM Email: Sam@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 702

800.S48.6914 I S73.663.7711

❘ L!  (888) 401-MENS 401-MENS

NO. 31

L O G G I N G

MARKETING DIRECTOR

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 KENTUCKY WOOD EXPO

OR 931-797-8029

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

John Deere 540D Cable Skidder

Komatsu PC270LC Delimber

Item ID: 99277

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

L O G G I N G

Item ID: 43950

CAT D4G Skidder Item ID: 99864

Timbco 445EXL Hotsaw Feller Buncher Item ID: 47200

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701

or (801) 319-9351

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Rayco 160 Forestry Mulcher Item ID: 77447

Item ID: 99846

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

OR 931-797-3915

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

S A W M I L L

‘83 John Deere 4850 HOT BUY! Item ID: 14073 HOT BUY! Contact: HOT BUY! Austin

chain conveyer, 8 way splitter, on

Ph: (888) 401-6367 Cook's AC-36 &x703 AP-4

Sawmill & Edger

with 1700Item hours,ID: in 62024 very good

Contact: SAM condition.

Easily produces high Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 quality chips with patented

‘Cone’

drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

Hurdle 2 Sawmill FIREWOOD PROCESSORS Item ID: 72999

2010 Shop Built Wood Processor Contact: SAM -Email: It has aSam@lumbermensco.com 353 Detroit diesel, 40 Phone: 888-401-6367 EXT30702 inch insert tooth circle saw, foot  Issue 364 391

Item ID: JW-909632 EXT 702 Phone: 888-401-6367 Contact: J Williams Ph: (888) 401-6367 x701

'96 CAT 515 Log Skidder Item ID: 7534

Contact: SAM Email: Sam@lumbermensco.com ‘13 KMC 2500 Track Phone: 888-401-6367 EXT 702

Skidder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Prentice 180E

Caterpillar

Item ID: 2476 ‘16 Halverson H140 Contact: SAM (DEMO) Skidsteer Email: Sam@lumbermensco.com

20,000lb goose neck trailer. Item ID 13916. x703 '02 Austin WoodMizer

LT-40

ID: 11345 Best ValueItem Portable Log Splitter

-Contact: Small manufacturer AUSTIN in PA has Email: Austin@lumbermensco.com made the888-401-6367 best valued logEXT splitter.

Phone: 703

OR up 931-797-8029 Handles logs to 32”. Uses 13HP Honda motor. Manual start but electronic option is available.

Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Edmiston Complete Sawmill homemade processor with a 10’

Item ID: 14084 log deck. Has a hydraulic grapple, Contact: AUSTIN chain kicker that all runs off Email:and Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 of a 4 cylinder Mercedes power

OR 931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

off onto a conveyor. This is a very

well built processor. Item ID 13820.

SamJohn x702

Deere 450H LGP

ID: 99891 FirewoodItem Processor - This is aContact: Chomper SAMModel 16 PDA

Email: Sam@lumbermensco.com automatice firewood Phone: 888-401-6367 EXTprocessor 702

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500.

Item 548G2 ID 13865.

John Deere Sam x702 Grapple Skidder Item ID: 78104 LOGGING EQUIPMENT

BANDIT

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine

Blockbuster 18-20 with 850 HP. 5300 hrs.

Mill inPlus Item ID: 4058 good condition. Just finished 10 Contact: SAM job, ready to work!

Acre Email:clearing Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Remote control. Big production

 List  seLL  exchange  buy  save

‘93 ‘11 Barko 180B Tigercat 620D

Item ID:Item 14077 ID: 13929 Contact: Austin Contact: SAM Ph: (888) 401-6367 x703 Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘95 John Deere ‘14 CAT 535C C6 ID: 13840 Tree Item Farmer

Item ID:SAM 13920 Contact: Email: Sam@lumbermensco.com Contact: Austin Phone: 888-401-6367 EXT 702 Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Cat 559B Knuckle

grapple,Boom 5,000 original hours.

Loader

Item ID: 99872 (excellent condition.).

Item ID 13238.

Chris Contact: SAMx700

Email: Sam@lumbermensco.com

1995 Barko 775 B Feller Buncher Phone: 888-401-6367 EXT 702

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

Tigercat 724E Feller

meter dont work.

The last 2 owners Buncher have onlyItem used ID: it to99815 load trucks or

Contact: SAM as needed. Has a CTR as a backup Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam

Meadows #3 Complete Operation

x702

Item ID: 964

BELL

Contact: AUSTIN 1990 Bell Super T - This Bell has Email: Austin@lumbermensco.com 888-401-6367 EXTLever 703 aPhone: brand new Duetz engine.

OR 931-797-8029 control, 33” bar, pump and tranny ❘

 LumbermensCO.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

Woodmizer Twin Blade Diesel Edger Item ID: 14191

Contact: AUSTIN The Tree Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 that Started

OR 931-797-8029

it All!

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER Precision Scragg Woods Publishing Item ID: 3607

ADVERTISING SALES

Contact: TED Morris Woods Email: Teds@lumbermensco.com (888) 401-6367 ext.

704 Phone: 888-401-6367 EXT 701

or (801) 319-9351 morris@lumbermens.co

Boonville, New York www.starwebhosting.net/woodsmen/ Mobile Dimensions

Danchaert Band Resaw Item ID: 13876

Model 12 Circle Saw SOUTHWEST FOREST PRODUCTS Item ID: 62784 EXPO Fri, 25 August - Sat, 26 August

Contact: AUSTIN Contact: SAM Email: Austin@lumbermensco.com Hot Springs, Arkansas Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 703 www.arkloggers.com Phone: 888-401-6367 EXT 702

OR 931-797-8029

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept ‘14 Hurdle 3-HD Block Sawmill Selma, '94 Barko Knuckleboom North160 Carolina Item ID: 13997

MID-ATLANTIC

Item ID: 14186 www.midatlantic-logging-biomass­ expo.com/ Contact: AUSTIN

LOGGING & AUSTIN BIOMASS EXPO Contact: Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 KENTUCKY WOOD EXPO

OR 931-797-8029

OR 931-797-8029

Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall S&W 125 High Production Mill (888)Item 401-6367 ext. 702 ID: 8019 sam@lumbermens.co

Contact: AUSTIN Austin Woods Email: Austin@lumbermensco.com (888) 401-6367 ext.

703 Phone: 888-401-6367 EXT 703

OR 931-797-8029 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

QualityPOSTMASTER 4 Head Trim Saw

Send Item address to: ID: changes 1559 Lumberman's Exchange Contact: TED P.O. Box 1916 Email: Teds@lumbermensco.com Columbia, TN 38402

Phone: 888-401-6367 EXT 701

or (801) 319-9351

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submittedLumber by advertisers Jackson andHarvester writers, the Lumberman's Circle Mill Exchange, its principles and Item ID: 2346 associates, are not held liable for errors or omissions.

Reproduction, Contact: SAM in whole or part, is prohibited with­ Email: Sam@lumbermensco.com out written consent.

Phone: 888-401-6367 EXT 702 ©2017 Woods Publishing

Woodmizer LT 3000 Operation Item ID: 10761

Cambridge, Ohio www.ohioforest.org

Sanborn Scragg Mill Item ID: 14050

** INFO LINK**

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

Pendu Cut Off Saw

BANDMILLS & 10632 HEADSAWS Item ID:

Danckaert Band Resaw - Roughly Contact: AUSTIN Email: 10 hoursAustin@lumbermensco.com on this machine since it Phone: 888-401-6367 EXT 703 has it has a 24foot in been rebuilt, OR 931-797-8029 feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel ‘13 Woodmizer 4000 Sawmill Item ID: 14000 is supported on both sides. This AUSTIN isContact: an extremely accurate machine Email: Austin@lumbermensco.com in ve1y good condition, Cuts 130 Phone: 888-401-6367 EXT 703

OR 931-797-8029 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Corinth American Sawmill

Sam x702 Item ID: 99844

CARRIAGES & DRIVES

Contact: AUSTIN

Email:Cardinal Austin@lumbermensco.com 2010 HD Carriage Phone: 888-401-6367 EXT 703

OR 931-797-8029 Carriages (Sawmill) - Cardinal

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) ........ 36 Item ID: 33423

Morbark .....................................

9 Item ID: 70976

Cornell Edger

Corley Mfg Contact: TED.............................. 32 Email: Teds@lumbermensco.com CRD Metalworks ....................

Phone: 888-401-6367 EXT 70125

or (801) 319-9351 CW Mill-ArmorHog .............. 17

Holtec Transcut II

Multitek ...................................

12 Contact: AUSTIN Email: Austin@lumbermensco.com Piper's Shop....................

13 Phone:Saw 888-401-6367 EXT 703

OR 931-797-8029 Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

1996 Jackson Shavings Mill Hurst Boiler ............................. 14

Item ID: 1271 Iron Bull ................................... 21 Contact: AUSTIN Email: Austin@lumbermensco.com Kilgore Saw .............................

Phone: 888-401-6367 EXT 70322 Lignomat OR.................................

931-797-8029 24

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Corley Complete Sawmill

Thomas Industrial Controls..... 10 Item ID: 14035 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Email: Austin@lumbermensco.com Universal Refiner ...................

23 Phone: 888-401-6367 EXT 703

OR 931-797-8029 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

'02bottom Woodmizer LT-40 Super 48" saw and 36" top sawHD Item ID: 14118

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

Hurdle Circle Saw Item ID: 42289

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 33

S A W M I L L

MARKETING DIRECTOR

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

“Precision Under Pressure”

Baker Double End Trim Saw Item ID: 49890

Item ID: 49307

Item ID: 14250 ‘16 Halverson H140 Contact: AUSTIN Skidsteer (DEMO) Email: Austin@lumbermensco.com

‘93 Real Barko Tuff180B Bagger

Item ID: 50281 Item ID: 14077 Contact:AUSTIN Austin Contact: Email: Austin@lumbermensco.com Ph: (888) 401-6367 x703

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Hud-Son 360 Portable Sawmill

Woodmizer LT40 Hydraulic

Cornell Double End Trim Saw

‘95Fast John DeereSystem C6 Go Run Around

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701

or (801) 319-9351

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 703 ‘13 KMC 2500 EXT Track

OR 931-797-8029

Item ID:SAM 13920 Contact: Email: Sam@lumbermensco.com Contact: Austin Phone: 888-401-6367 702 Ph: (888) 401-6367 EXT x703

Item ID: 7516

Item ID: 8841

S A W M I L L

Meadows #2 Deluxe

Baker Notcher

03’ Woodmizer LT-300 Operation

Desjardin Shingle Mill

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 ‘05 Gehl CTL 70

or (801) 319-9351

Item ID: 63655

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 Baker Bandmill

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Breezewood Band Mill

Item ID: 96085 with 1700 hours, in very good Contact: SAM condition.

Easily produces high Email: Sam@lumbermensco.com Phone:chips 888-401-6367 EXT‘Cone’ 702 quality with patented

Best Value Portable Log Splitter Item ID: 83736 - Small manufacturer in PA has Contact: SAM made best valued log splitter.

Email:the Sam@lumbermensco.com Phone: logs 888-401-6367 EXT 702 Handles up to 32”. Uses

vans and produce 6 - 8 loads per

but electronic option is available.

drum design. Can easily load 42’ day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

Meadows 2 Deluxe Sawmill FIREWOOD PROCESSORS Package Miner Edger

45399 2010 ShopItem Built ID: Wood Processor - Contact: It has a SAM 353 Detroit diesel, 40 Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 inch insert tooth circle saw,

 Issue 364 391

30 foot

Contact: J Williams Ph: (888) 401-6367 x701

Item ID: 6307

Skidder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Item ID: 14171

Phone: 888-401-6367 Item ID: JW-909632 EXT 703

OR 931-797-8029

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Johnprocessor Deere with 859M homemade a 10’ Tracked Cutter w/ log Quadco deck. Has a3200 hydraulic grapple, Barsaw

off onto a conveyor. This is a very

Fence Post Processing Operation

knuckleboom, 30' boom, 75hp

on injection pump. always started

tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Rogers 4 Headblock Circle Mill

Sam x702 Item ID: 23205

LOGGING EQUIPMENT

- Pumps recently redone. 400 hrs

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

Morbark Stac Trac

meter dont work. last 2 owners Item ID:The 64060

Contact: SAM BANDIT Email: Sam@lumbermensco.com Phone: 888-401-6367 702 1999 Bandit 1900 TrackedEXT Disc

have only used it to load trucks or Contact: AUSTIN Email: Austin@lumbermensco.com as a backup as needed. Has a CTR Phone: 888-401-6367 EXT 703

931-797-8029 delimber, grapple has been rebuilt.

50% or better. 475 hp Cummins

Item ID 13694. Sam x702

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine

Email: Sam@lumbermensco.com Phone: 888-401-6367 702 Remote control. BigEXT production

❘

BARKO

1994 Barko 160B - Electric

low hours. Control panel includes

with John Deere power unit with

Email: Sam@lumbermensco.com Phone: 888-401-6367 702 unit.

Has a 4’ chainEXT saw that

Lumbermens™  since 1986

capacity!. Item ID 13421. Sam x702

Firewood Processor - This is Contact: AUSTIN Austin@lumbermensco.com aEmail: Chomper Model 16 PDA Phone: 888-401-6367 EXT 703 automatice firewood processor

931-797-8029

Sam x702 Item ID: 42175

chain andItem kickerID: that all runs off 31379

kicks

Tree Item Farmer ID: 84282

LT40 motor,Wood-Mizer Rotobec continuous Item ID: 13995 grapple, 5,000 original hours.

Contact:condition.).

AUSTIN Item ID (excellent Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 13238.

Chris x700

OR 931-797-8029 1995 Barko 775 B Feller Buncher

well built processor. Item ID 13820.

with 850King HP. 5300 hrs. Mill in Trail 60 Ton Lowboy Item ID: good condition.

Just56166 finished 10

Contact: SAM Mercedes power of a 4 cylinder

Phone: 888-401-6367 EXT 703

OR 931-797-8029

Acre clearing Contact: SAM job, ready to work!

 List  seLL  exchange  buy  save

Boom cylinders have minor leaks.

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam

x702 Cook 3238 HD Portable Sawmill Item BELL ID: 90653 1990 Bell Super T - This Bell has Contact: TED

aEmail: brandTeds@lumbermensco.com new Duetz engine.

Lever Phone: 888-401-6367 EXT 701

or bar, (801)pump 319-9351 control, 33” and tranny

❘

 LumbermensCO.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

1973 Transcraft Drop Deck Log & Equipment Trailer Item ID: 39382

Contact: TED The Tree Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 that Started

or (801) 319-9351

it All!

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER Precision Chipper Woods Publishing

Item ID: 4524

F800 Boom Bucket Truck Item ID: 35784

CTR Stand Alone

SOUTHWEST FOREST PRODUCTS EXPO Delimber Fri, 25 August -Item Sat,ID: 267735 August

Contact: AUSTIN Email: Austin@lumbermensco.com Hot Springs, Arkansas Contact: SAM Phone: 888-401-6367 EXT 703 Email: Sam@lumbermensco.com www.arkloggers.com

OR 931-797-8029 Phone: 888-401-6367 EXT 702

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 '10 SeptWoodsman - Sat, 16 Sept440 25' LOG PUP 4 BUNKS TRAILER Selma, Whole Chipper NorthTree Carolina Item ID: 8062

MID-ATLANTIC

Item ID: 14105 www.midatlantic-logging-biomass­ expo.com/ Contact: AUSTIN

LOGGING & JOE BIOMASS EXPO Contact: Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709

801-362-2170

MARKETING DIRECTOR

Email: Austin@lumbermensco.com KENTUCKY WOOD EXPO Phone: 888-401-6367 EXT 703 Sept OR 931-797-8029 Fri, 15 - Sat, 16 Sept

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall Viking Trailer (888)Deloupe 401-6367 ext.

702 Item ID: 32415 sam@lumbermens.co

Contact: AUSTIN Austin Woods Email: Austin@lumbermensco.com (888) 401-6367 ext.

703 Phone: 888-401-6367 EXT 703 austin@lumbermens.co

OR 931-797-8029

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER Morbark Chipper

SendItem address changes to: ID: 80356 Lumberman's Exchange P.O. Box 1916 Contact: TED Email: Teds@lumbermensco.com Columbia, TN 38402

Phone: 888-401-6367 EXT 701 The Lumberman's or (801) Exchange 319-9351is

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of 2015 Morbark M20R content submitted by advertisers Forestry Track Chipper and writers, the Lumberman's Exchange,Item its principles and ID: 12383 associates, are not held liable for Contact: errors orTED omissions. Reproduction, Email: Teds@lumbermensco.com in whole or part, is prohibited with­ Phone: 888-401-6367 EXT 701 out written or consent.

(801) 319-9351 ©2017 Woods Publishing

94’ Mack w/ Prentice 120 Item ID: 14215

Cambridge, Ohio www.ohioforest.org

Int'l 4300 Bucket Truck Item ID: 29129

** INFO LINK**

Bandit 1850 Chipper BANDMILLS & HEADSAWS Item ID: 80543

Danckaert Band Resaw - Roughly Contact: 10 hours onSAM this machine since it Email: Sam@lumbermensco.com has been rebuilt, it has a EXT 24foot in Phone: 888-401-6367 702 feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough

pressure guides. Top Casting wheel '99 Peterbilt Road Tractor Item ID: 14188 is supported on both sides. This AUSTIN isContact: an extremely accurate machine Email: Austin@lumbermensco.com in ve1y good condition, Cuts 130 Phone: 888-401-6367 EXT 703

OR 931-797-8029 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to Fruehauf run. Item ID 13434.

1995

Sam x702 Item ID: 69317

CARRIAGES & DRIVES

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Item ID: (AIM) 761 ........ 36 Buck Equipment

Morbark .....................................

9 Item ID: 8256

MACK CHN613

Sun 4 Bolster Log Trailer

CW Mill-ArmorHog .............. 17

Contact: AUSTIN Multitek ...................................

12 Email: Austin@lumbermensco.com Piper's Shop....................

13 Phone:Saw 888-401-6367 EXT 703

931-797-8029 Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Corley Mfg .............................. 32 Contact: AUSTIN Email: Austin@lumbermensco.com CRD Metalworks 25 Phone: 888-401-6367....................

EXT 703

OR 931-797-8029

Kenworth Log Truck Hurst Boiler ............................. 14

Item ID: 4849 Iron Bull ................................... 21 Contact: AUSTIN Email: Austin@lumbermensco.com Kilgore Saw .............................

Phone: 888-401-6367 EXT 70322

931-797-8029 Lignomat ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

3 Strand Log Deck

Thomas Industrial Item ID:Controls 14095 ..... 10 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Email: Austin@lumbermensco.com Universal Refiner ................... 23 Phone: 888-401-6367 EXT 703

OR 931-797-8029 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

Contact: TED

Email: Teds@lumbermensco.com 2010 Cardinal HD Carriage Phone: 888-401-6367 EXT 701

or (801) 319-9351 Carriages (Sawmill) - Cardinal

Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage,

02’bottom Jackson Lumber 48" saw and 36"Harvester top saw Item ID: 1187

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

Morbark 40/36 Item ID: 647

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 www.BakerProducts.net 801-362-2170 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 35

M I S C E L L A N E O U S

ADVERTISING SALES

Contact: TED Morris Woods Email: Teds@lumbermensco.com (888) 401-6367 ext.

704 Phone: 888-401-6367 EXT 701 morris@lumbermens.co

or (801) 319-9351

Boonville, New York www.starwebhosting.net/woodsmen/

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

2009 Bandit 90XP PullBehind Wood Chippers Item ID: 86220

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701

or (801) 319-9351

Tajfun Firewood Processor Item ID: 14249

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

Morbark 6036 Chipper

‘16 Halverson H140 Item ID: 75143 Skidsteer Contact: SAM (DEMO) Email: Sam@lumbermensco.com Item ID: JW-909632 Phone: 888-401-6367 Contact: J Williams EXT 702

‘93 FordBarko Bucket / 180B Boom Truck

Item ID: 14077 Item ID: 80919 Contact: Austin Contact: TED Ph: (888) 401-6367 x703 Email: Teds@lumbermensco.com

Phone: 888-401-6367 EXT 701

or (801) 319-9351

M I S C E L L A N E O U S

Ph: (888) 401-6367 x701

2015 Morbark M20R Forestry Track Chipper

25 Ton Pintle Hitch Trailer Item ID: 99848

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701

or (801) 319-9351

Cat C15 Generator Set

with 1700Item hours,ID: in 99858 very good

Item ID: 347

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 ‘05 Gehl CTL 70EXT 702

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID

Paccair 13916. Austin x703 Winch

ID: 86536 Best ValueItem Portable Log Splitter

Phone: 888-401-6367 EXT 702 ‘Cone’ quality chips with patented

-Contact: Small manufacturer in PA has TED Email: Teds@lumbermensco.com made the888-401-6367 best valued logEXT splitter.

Phone: 701

or (801) Handles logs up to319-9351 32”. Uses

vans and produce 6 - 8 loads per

but electronic option is available.

condition.

Easily produces high Contact: SAM Email: Sam@lumbermensco.com

drum design. Can easily load 42’ day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Pup Sam Trailers Item ID 13644. x702 Item 53363 FIREWOODID: PROCESSORS

2010 Shop Built Wood Processor Contact: TED Email: Teds@lumbermensco.com

-Phone: It has 888-401-6367 a 353 DetroitEXT diesel, 701 40

or (801) 319-9351

inch insert tooth circle saw, 30 foot  Issue 364 391

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

Ford Altec Bucket Truck

Item ID: 16688

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701

or (801) 319-9351

off onto a conveyor. This is a very

2016 Barko Tree Chipper

‘83 John Deere 4850

Item ID: 72593

Item ID: 12383

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701

or (801) 319-9351

Bandit Grinder - Chipper

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

Transcraft Trailer

log deck. Has hydraulic Itema ID: 45261 grapple, chain and kicker that all runs off Contact: TED Email: Teds@lumbermensco.com of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 701

or (801) 319-9351

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

'09 Mack TruckItem & Trailer well built processor.

ID 13820.

Item ID: 74618 Sam x702 Firewood - This is Contact:Processor TED Email: Teds@lumbermensco.com aPhone: Chomper Model 16 PDA 888-401-6367 EXT 701

or (801) 319-9351 automatice firewood processor with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Morbark PS8 Post Peeler Sam x702 Item ID: 63148

LOGGING EQUIPMENT Contact: SAM BANDIT Email: Sam@lumbermensco.com

2014 Morbark M20R ‘95 John Deere C6 Forestry Track Chipper ID: 46375 TreeItem Farmer

Item ID: Contact: TED 13920 Email: Teds@lumbermensco.com Contact: Austin Phone: 888-401-6367 EXT 701 Ph: (888) or (801) 319-9351 x703 401-6367

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp

motor, Rotobec continuous Dymax Skidsteer Tree Cutter Itemoriginal ID: 96694 grapple, 5,000 hours.

(excellent condition.). Item ID Contact: TED

Email: Teds@lumbermensco.com

13238. x700 Phone:Chris 888-401-6367 EXT 701

(801) 319-9351 1995 Barkoor775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with

approximately hours.Truck Hour Ford F650 1500 Service Item ID: 92089 meter dont work. The last 2 owners

Phone: 888-401-6367 702 1999 Bandit 1900 TrackedEXT Disc

Contact: AUSTIN have only used it to load trucks or Email: Austin@lumbermensco.com as a backup as needed. Has CTR Phone: 888-401-6367 EXTa703

OR 931-797-8029 delimber, grapple has been rebuilt.

50% or better. 475 hp Cummins

Item ID 13694. Sam x702

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 -

1999 International 9100 3412 Caterpillar Diesel engine

Item ID: 33563 with 850 HP. 5300 hrs. Mill in Contact: TED good condition.

Just finished 10 Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 Acre clearing job, to work!

or (801)ready 319-9351 Remote control. Big production

 List  seLL  exchange  buy  save

Boom cylinders have minor leaks.

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam

'07 Morbark 3800 Grinder Item BELL ID: 84439

x702Horizontal

1990 Bell Super T - This Bell has Contact: TED

Email: Teds@lumbermensco.com aPhone: brand new Duetz engine. Lever 888-401-6367 EXT 701

or (801) 319-9351 control, 33” bar, pump and tranny

❘

 LumbermensCO.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

'93 KW 425 CAT

Morbark Chipper

The Tree

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701

or (801) 319-9351

Item ID:13342

Contact: WALKER that Started Email: Walker@lumbermensco.com Phone: 888-401-6367 it All! EXT 707

Item ID: 43812

'97 Mack 300 Truck Woods Publishing Item ID: 44852

MARKETING DIRECTOR

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Selma, North Carolina Prentice 410EX truck mounted www.midatlantic-logging-biomass­ knuckle boom loader expo.com/

Shop Built Wood Processor Item ID: 14038 MID-ATLANTIC

LOGGING & BIOMASS EXPO

Item ID: 70691 Contact: AUSTIN Email: Austin@lumbermensco.com KENTUCKY WOOD EXPO Contact: SAM Phone: 888-401-6367 EXT 703 Email: Sam@lumbermensco.com Fri, 15 Sept - Sat, 16EXTSept

OR 931-797-8029 Phone: 888-401-6367 702

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall (888) 401-6367 702 Mack Pickerext.

Truck sam@lumbermens.co Barko 80 Loader

‘15 Cord King M44 Item ID: 13961

Cambridge, Ohio www.ohioforest.org

W6F Allied Systems Winch Item ID: 56032

** INFO LINK**

Case FLX437 Floater BANDMILLS & HEADSAWS Picker Log Truck

DanckaertItem BandID: Resaw - Roughly 18710 10 hours on this machine since it Contact: SAM Email: Sam@lumbermensco.com

has been rebuilt, it has a 24foot in Phone: 888-401-6367 EXT 702 feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

Morbark 58” LIKE NEW

is supported on ID: both6114 sides. This Item

isContact: an extremely accurate machine AUSTIN Email: Austin@lumbermensco.com in ve1y good condition, Cuts 130 Phone: 888-401-6367 EXT 703 feet has CLT presses. a minute OR also 931-797-8029 Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hoursPatriot ready to run.

Item ID 13434.

GBN Nailer

Sam x702 Item ID: 99886

CARRIAGES Contact: SAM & DRIVES Email: Sam@lumbermensco.com 2010 Cardinal HD Carriage Phone: 888-401-6367 EXT 702 Carriages (Sawmill) - Cardinal

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

May be sent to­ morris@lumbermens.co

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

POSTMASTER

AM General M818 Army Truck Buck Equipment (AIM) ........ 36

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Item ID: 14576 Corley Mfg .............................. 32 Contact: WALKER Email: Walker@lumbermensco.com CRD Metalworks ....................

Phone: 888-401-6367 EXT 70725

or 931-797-3915 CW Mill-ArmorHog .............. 17

Morbark .....................................

9 Item ID: 56046

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Item ID:Woods 99847 Austin (888) 401-6367 ext. 703 Contact: SAM Email: Sam@lumbermensco.com austin@lumbermens.co Phone: 888-401-6367 EXT 702

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

Send address changes to: LT50 Wide, EG200 Edger, Lumberman's Exchange Sharpener/Setter P.O. ID: Box60876 1916 Item

Columbia, TN 38402

Contact: SAM Email: Sam@lumbermensco.com The Lumberman's Phone: 888-401-6367Exchange EXT 702 is

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's 4700 International Lube Truck Exchange, its principles and Item ID: 61127 associates, are not held liable for errors or omissions.

Reproduction, Contact: SAM in whole or part, is prohibited with­ Email: Sam@lumbermensco.com out written consent.

Phone: 888-401-6367 EXT 702 ©2017 Woods Publishing

2007 Morbark Chipper Hurst Boiler .............................

14

Item ID: 9658 Iron Bull ................................... 21 Contact: WALKER Email: Walker@lumbermensco.com Kilgore Saw ............................. 22 Phone: 888-401-6367 EXT 707 Lignomat ................................. 24

or 931-797-3915

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

CAT Generators

Multitek ................................... 12 Contact: TED Email: Teds@lumbermensco.com Piper's Saw Shop.................... 13 Phone: 888-401-6367 EXT 701 Rotochopper ............................

or (801) 319-9351 40

Thomas Industrial Controls..... 10

Nova Dry Kiln.. 2, 37 Union Grove Saw & Knife Item ID: 83618 Universal Refiner ................... 23 Contact: SAM

Email: Sam@lumbermensco.com WoodMizer ................................ l Phone: 888-401-6367 EXT 702

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage,

48" and 36" top saw60 ‘06bottom Cordsaw King Model Item ID: 14068

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

1990 Freightliner Item ID: 7422

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 www.BakerProducts.net or (801) 319-9351 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 37

M I S C E L L A N E O U S

ADVERTISING SALES

Morris Woods Contact: TED Email:(888) Teds@lumbermensco.com 401-6367 ext. 704 Phone: 888-401-6367 EXT 701 morris@lumbermens.co

or (801) 319-9351

Hot Springs, Arkansas Contact: TED Email: Teds@lumbermensco.com www.arkloggers.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

09 Rotobec Loader on

'87 Peterbuilt SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August -Item Sat,ID: 261101 August

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

“Precision Under Pressure”

A D D I R EC TO RY

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

,-soo-211-94&8 ‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 391

tach, oil pressure, water temp and PLEASE PRINT

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

amp gauges. Cuts logs up to 16”.

good. in good working order. 22in

SEPTEMBER 2020

kohing head. head works great.

If you need to Change your Address or Item ID 13185. Sam x702 Add Your Name to our mailing list, then manuals and receipts.

Purchased Barkoand 160D -mail new engine please complete this1999 form to: with One owner and comes with all

new for $32,500. Item ID 13865.

approximately 1500 hours. Hour

- Small manufacturer in PA has

Lumbermens™ Magazine meter dont work. The last 2 owners Sam x702 P.O. Box 1916 LOGGING EQUIPMENT have38402 only used it to load trucks or Columbia, TN

Handles logs up to 32”. Uses

❑ Bandit Please ❑ Disc Please Change Please Remove 1999 1900Add Tracked delimber,❑ grapple has been rebuilt.

Best Value Portable Log Splitter made the best valued log splitter.

13HP Honda motor. Manual start

• Through-beam range u1p to 230 feet vans and produce 6 - 8 loads per but electronic option is available.

• Waterproof - IP67 rated day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge • Not affected by vibration EDGERS & GANGS adjustable to single two way. Great • 60k LUX Immunity to sunlight Brewco Saws - Two Brewco Saws Value! PA. Item ID 12062. Sam x702 in excellent condition. Runs great.

Anson..................................................13..............................800-663-7723 B & B Mfg..........................................12..............................800-654-5320 B. H. Payne........................................17..............................404-761-8711 Baker...................................................8, 10.........................800-548-6914 Bell's Machining...............................15..............................888-995-1965 ‘93 Barko 180B Blockbuster Inc.................................10..............................888-775-4883 ‘16 Halverson H140 Item ID: 14077 Buck Equipment (AIM)....................17..............................800-803-3365 Contact: Austin Skidsteer (DEMO) Cord King...........................................2...........................

888-219-WOOD Ph: (888) 401-6367 x703 Item ID: JW-909632 Corley Mfg.........................................4................................423-698-0284 Contact: J Williams CW 8, 11.....................800-743-3491 Ph: Mills............................................5, (888) 401-6367 x701 F&R Mfg.............................................16..............................800-355-1250 Great Lakes Mfg...............................15..............................877-248-5677 GoFast Manufacturing....................6................................800-854-7439 Hurst Boiler.......................................12..............................877-774-8778 JM Wood Auction Company, Inc........7................................800-447-7085 Kilgore Saw........................................12..............................888-857-5153 ‘95 John Deere C6 Klug Korners.....................................17..............................800-471-5060 Tree Farmer Lignomat............................................10..............................800-227-2105 Item ID: 13920 L-M Equipment Co. Ltd...................39..............................800-455-8807 Contact: Austin ‘13 KMC 2500 Track Lumbermens Big Giveaway...........3........... www.Lumbermensco.com Ph: (888) 401-6367 x703 Skidder Menominee Saw...............................17..............................800-582-0470 Item Detectors, ID: 14078 Inc........................6................................541-345-7454 Metal Contact: Austin capacity!. Item ID...231-924-5953 13421. Sam x702 Midwest Sharpening ......................14...........................

Ph: (888) 401-6367 x703 BARKO Multitek North America. LLC........14..............................800-243-5438 1994 Barko 160B - Electric OMEF Forestry Equip Manufacturer....1................................778-222-9111 knuckleboom, 30'...800-211-9468 boom, 75hp off onto aAutomation, conveyor. ThisInc. is a..............38........................... very Pantron well built processor.

Item ID 13820. motor, Rotobec continuous Piper’s Saw Shop..............................8................................800-845-6075 grapple, 5,000 original hours.

Sam x702Manufacturing, Inc............6................................877-563-8899 Prolenc Firewood Processor - This is (excellent condition.).

Item ID Row Electric......................................14........................... ...800-248-4479 13238.

Chris x700 aSelect Chomper Model 16...........................8, PDA Sawmill Co..

15.........................866-724-7600 1995 Barko 775 B Feller Buncher automatice firewood processor Trelan..................................................40. .............................877-487-3526 with John Deere power unit with Pumps recently redone. 400 hrs Universal Refiner Corp....................9................................800-277-8068 on injection pump. always started low hours. Control panel includes Woodlandia.......................................16. .............................877-508-8777

Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

BANDIT

as a backup as needed. Has a CTR

*Company name and address process have your change.

Chipper - Cat Under Carriage at required Boomto cylinders minor leaks.

Company Name*:_ 50% or better.

475________________________________________________________ hp Cummins Item ID 13694. Sam x702

Diesel.

7500 Hours. One owner.

94 Barko 275 - Excellent value Individual Name:__________________________________________________________ Well maintained. Item ID 13294. with low at hours at 3,500. 5.9 Address:_________________________________________________________________ Sam x702

CUMMINS continuous grapple.

_______________________________________________________________________

2004 Bandit Beast Model 4680 -

Runs Great!. Item ID 13740. Sam

City:____________________________________________________________________

3412 Caterpillar Diesel engine

x702

State:___________________________________________________________________ with 850 HP. 5300 hrs. Mill in BELL Zip:__condition. ___________________________________________________________________ good Just finished 10 1990 Bell Super T - This Bell has

Acre clearing job, ready to work! a brand new Duetz engine. Lever Phone:__________________________________________________________________ Remote control. Big production control, 33” bar, pump and tranny Email:___________________________________________________________________

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 39

LUMBERMENSâ„¢ MAGAZINE 1116 West 7th Street, Suite 297 Columbia, Tennessee 38401

PRSRT STD. U.S. Postage PAID Permit No. 212 Pulaski, TN