Lumbermens July 2024 Magazine

F R E E

C L A S S I F I E D

L I S T I N G S

-

P G

6

JULY 2024 TM

pg.26>>

THE HM136MAX™ PORTABLE SAWMILL The HM136MAX™ is the ultimate solution for cutting wide live edge slabs, perfect for tabletops, counters, benches, and more. It features our Fullcut™ sawhead, which matches a 36” diameter log capacity with a 36” cut width, ensuring your logs’ widest assets are left intact.

STARTING AT

7,999

$

USD

Prices subject to change

36” Diameter Log Capacity 36” Max Cut Width 21 HP Honda GX630

Walk around the HM136MAX on your own property!

1-855-476-6455 woodlandmills.com

Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

P

IL L.S H

O

LIVI N

‘93 Barko 180B

Item ID: 14077 E WOO TH D Austin Contact: G Ph: (888) 401-6367 x703 SA

WM

P

TURBOSAWMILLS ARE IN STOCK

WM

FE! LI

‘16 Halverson H140 Skidsteer (DEMO)

SA

E WOO TH D

LIVI N

TURBOSAWMILLS ARE IN STOCK

G

FE! LI

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

IL L.S H

O

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

‘83 John Deere 4850

M10-28A: $29,900

chain conveyer, 8 way splitter, on

M10-28A - 4 In Stock

Item ID: 14073 20,000lb goose neck trailer. Item ID Contact: Austin Austin x703 Ph: 401-6367 x703 • (888) Single-end vertical13916. & horizontal sizing

M10-28A: $29,900 Best Value Portable Log Splitter

• 10” x 10” standard- Small cut manufacturer in PA has • 9”Easily x 20” double condition. produces high cut made the bestM10-28A: valued log $29,900 splitter. quality with patented ‘Cone’ (gross) Handles logs up to 32”. Uses • chips Honda Gas 30hp engine.

10-28A - 4 In Stock with 1700 hours, in very good

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

M12-28A: $35,000 Item ID 13185. Sam x702

M12-28A - 31999InBarko Stock 160D - new engine with

manuals and receipts. Purchased new for $32,500. Item ID 13865.

approximately 1500 hours. Hour

• x702 Single-end vertical &meter horizontal sizing M12-2 Sam dont work. The last 2 owners • 12” x 12” standard cut LOGGING EQUIPMENT have only used it to load trucks or BANDIT as needed.$35,000 Has a CTR M12-28A: • 11” x 24” double cutas a backup 1999 Bandit 1900 Tracked Disc delimber, grapple has been rebuilt.

• Honda Gas 30hp (gross) engine.

M12-28A - 3 In Sto

4 In Stock M12-28A Incylinders Stock drum design. M10-28A Can easily load 42’ - 13HP Honda motor. Manual start Chipper - Cat Under Carriage at - 3Boom have minor leaks.

-end vertical & horizontal sizing vans and produce 6 - 8 loads per but electronic option is available.

50% or better.

475 hp Cummins Item ID 13694. Sam x702 • Single-end vertical & horizonta • Single-end vertical & horizontal sizing •Jay Single-end &94horizontal sizing SAWMILL.SHOP | Call at (800) 598-6344 day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge Diesel.

7500 Hours.

Onevertical owner.

Barko 275 - Excellent value 10” standard cut • EDGERS 10” x &10” standard cut • 12” x 12” standard cut • 12” x 12” standard cut GANGS adjustable to single two way. Great Well maintained. Item ID 13294. with low at hours at 3,500. 5.9 • Saws 9” x- Two 20” double Brewco Brewco Saws cut Value! PA. Item ID 12062. Sam x702 Sam CUMMINS continuous grapple.

0” double cut •• x702 11” x 24” double cut 11” x 24” double cut in excellent condition.

Runs30hp great. (gross) Firewood Processor - This is a 2004 Bandit Beast Model 4680 Runs Great!. Item ID 13740. Sam • Honda Gas engine.

• Honda Gas 30hp (gross) engine. a Gas 30hp engine.

Item ID 13644. Sam (gross) x702 homemade processor with a 10’ 3412 Caterpillar Diesel engine x702 • Honda Gas 30hp (gross) engin FIREWOOD PROCESSORS

log deck. Has a hydraulic grapple,

BELL

with 850 HP. 5300 hrs. Mill in

SAWMILL.SHOP | offCall good Jay at (800) 598-6344 chain and kicker that all runs condition.

Just finished 10 1990 Bell Super T - This Bell has

2010 Shop Built Wood Processor

SAWMILL.SHOP | Call Jay at (800) 598-6344

- It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 437

of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Acre clearing job, ready to work!

Remote control. Big production

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 3

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

Grapple Assist for crooked logs

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

2019 Cord King Line-up

Email: info@cordking.ca Web: www.cordking.ca ‘13 KMC 2500 Track Skidder

‘95 John Deere C6 Tree Farmer Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

TOLL FREE 1-888-219-WOOD (9663) Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’

a Chomper Model 16 PDA

automatice firewood processor

Item ID: JW-986495 withsplitter John Deere power unit with • Wedge and Contact: J Williams design tolow hours.

Control panel includes suit your Ph: (888) 401-6367 x701

needs tach, oil pressure, water temp and • 24 to 72 ton splitting amp gauges.

Cuts logs up to 16”. capability One owner and comes with all chain conveyer, 8 way splitter, on • trailer.

The splitting 20,000lb goose neck Itemfastest ID manuals and receipts. Purchased cycle time on the 13916. Austin x703 new for $32,500. Item ID 13865. planet. Sam x702 Best Value Portable Log Splitter

Facts to consider:

- Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

1. Pioneered N. America’s first commercialChipper firewood processor in the mid 70’s 13HP Honda motor. Manual start - Cat Under Carriage at Boom cylinders have minor leaks.

drum design. Can easily load 42’

vans and produce 6 - 8 saw loads per but electronic optionM1820, is available.M2030 50% orand better.M2430 475 hp Cummins 2. 3 Bar models available day. Item ID 13882. Austin x703

Has Log Lift. Uses 4-way wedge

Diesel. 7500 Hours. One owner.

Brewco Saws - Two Brewco Saws

Value! PA. Item ID 12062. Sam x702

Sam x702

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

3. 7 Slasher Available Model 40, 44, 44HO, 48, 54 & 60 EDGERS & GANGS Saw Models adjustable to single two way.

Great 36, Well maintained.

Item ID 13294. with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

4. The Most productive machine on the planet, proven and guaranteed Firewood Processor - This is a 2004 Bandit Beast Model 4680 Runs Great!. Item ID 13740. Sam

in excellent condition. Runs great.

Item ID 13644. Sam x702

homemade processor with a 10’ 3412 Caterpillar Diesel engine x702 5. Go to our web site for live action video and details www.cordking.ca FIREWOOD PROCESSORS log deck. Has a hydraulic grapple, with 850 HP. 5300 hrs. Mill in BELL 2010 Shop 6.

Built Wood Processor chain andjoystick kicker that all runs off good condition. Just finished 10 1990 Bell Super T - This Bell has Available with single control - It has a 353 Detroit diesel, 40

of a 4 cylinder Mercedes power

Acre clearing job, ready to work!

a brand new Duetz engine. Lever

7. Exclusive lifetime splitter warranty and Remote 1 year bumper to bumper warranty. control. Big production control, 33” bar, pump and tranny unit. Has a 4’ chain saw that kicks

inch insert tooth circle saw, 30 foot  Issue 364 437

Lumbermens™  since 1986

❘

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

PleAse PrINt

Pulleys on Bearing . Parts Book and

belted rollcase to clear slabs and

12846. Sam x702

short pop-up transfer to edger,

where to order included. Item ID

cuts from sawline, log stop and

Zip

❑ Please Remove

loader to drop logs onto carriage,

Precision 58 Chip Pac - Single chute

stop and loader to deal with big

Sam x702

loading system,. Item ID 12764.

heavy duty log turner under log

EST

logs onto carriage and track and

Email

State

www.starwebhosting.net/woodsmen/ frame. Significant new spare parts to be negotiated separately. Item ID

The Tree that Started it All!

Trelan Chipper - This is a remote

chipper that has been totally rebuilt with about 840 hours except for the

BANDMILLS & HEADSAWS DealS Month SOUTHWEST FOREST PRODUCTS EXPO Danckaert Band Resaw - Roughly Fri, 25 August Sat, 26 August From ApriL TA B L E O F C O N T E N T S of the

13198. Sam x702

Manual Four Head Block - Manual Four Head Block Mounted on

all steel carriage. Husk. Manual Hot Springs, Arkansas www.arkloggers.com

'12 WoodmIzer LT 40

City

❑ Please Change

FOR CLASSIFIEDS Call 888.401.MENS TM CHIPPERS See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at L I S T New S York ELL EXCHANGE BUY SAVE 1986 Boonville, www.LumberMB\ISmagazine.com blades and 1 spare 36" blade),

DEPARTMENTS

V-12 Caterpillar power unit. New clutches, disc, bearing, liners and

custom chute. 23” in opening and V-12 Cat with 750-800 hp rating.

10 hours on this machine since it

has been rebuilt, it has a 24foot in

EquipmEnt REpREsEntativEs EST 1986

deck 20 foot out feed deck cAll uS todAy All youR uSed 72ND ANNUAL GREAT LAKES foR feed equiPMent with needS! 44 inch wheels, and all the Since 1986, Lumbermens has FREE CLASSIFIED LISTINGS ....................6 LOGGING & HEAVY EQUIPMENT EXPO published a monthly circular Thurs, 7 Sept Sat, 9 Sept bells and whistles, its a production fREE EquipmEnt listings!

Call –

Individual Name

Company Name*

❑ Please add

reaching sawmills, loggers, LIST SELL EXCHANGE BUY SAVE INDUSTRY NEWS ....................................24-25 Escanaba, Michigan(888) 401-6367 machine, with air strain conveyers pallet makers, recyclers and 'Stacker Dudes' from Automated Industrial Technologies that go up and down, with airbags, industrial woodworking plants & BIOMASS Rebrand Machine Division to Max Board LFeet 24-25 I S T(MAX) S E ................

LL E XMID-ATLANTIC C HANGE B U Y LOGGING SAVE worldwide. item id: 14061 Morris it includes two sets of Mcdonough

Chris

Address

Fri, 15 Sept - Sat, 16 Sept contact: Austin x703 SAFETY ALERT ...............................................25 EST 1986 PUBLISHER AD Sales

pressure guides. Top Casting wheel

JoHn deere Selma, North Carolina Instructor During Chainsaw2012 Safety Training Workshop WoodsInjured Publishing 548G3 (888) 401-6367 www.midatlantic-logging-biomass­ Phone

MID-ATLANTIC

ADVERTISING SALES

(888) 401-6367 ext. 704 morris@lumbermens.co AD DIRECTORY ............................................38

MARKETING DIRECTOR

Lumbermens Magazine

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Reduced PRice item id:14021 contact: Sam x702

FAbTeK 344b

P.O. Box 1916 Columbia, TN 38402

Donna Heninger

EQUIPMENT REPS

✁

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367 May be sent to­ morris@lumbermens.co

is an extremely accurate machine

chris@lumbermensco.com

morris@lumbermensco.com

KENTUCKY WOOD EXPO chris Woods Fri, 15 Sept - (888) Sat, 16401-6367 Sept Phone:

in ve1y good condition, Cuts 130

Morris Woods, Ad Sales Phone: (888) 401-6367 ext. 704 morris@lumbermens.co

feet a minute also has CLT presses.

ext. 700 chris@lumbermens.co

Lexington, Kentucky http://www.kfia.org/ Sam KentuckyWoodExpo.aspx (888) 401-6367

item id: 14061 contact: J Williams x701

For classifieds Call toDay (888) 401-6367

Item ID 13876. Austin x703

Austin S & W 125 Band Mill with

(888) 401-6367 Caterpillar generator - Low hours

❘

Walker

(888) 401-6367 Ext. 707 ❘

walker@lumbermensco.com

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Bell's Machining ..................... 27 Brute Force Mfg. ..................... 31

Buck Equipment (AIM) ........ 36 Send address changes to: SUBSCRIPTION: Lumbermens™, a trade newspaper for the logging, Lumberman's Exchange Mfgwood .............................. sawmilling, manufacturing, andCorley secondary manufacturing32 P.O.pallet Box 1916 industry, is freeTN within the United States to qualifying manufacturers Columbia, 38402 CRD Metalworks ....................

25 and industry suppliers. Please limit your subscription to one free copy per company orExchange mill locatiison.

The Lumberman's CW Mill-ArmorHog .............. 17

published monthly

by Woods Send address changes to Lumbermens™ CHANGE OF ADDRESS: CW Mill-Hogzilla ................... 15 Publishing, Box 1916, Magazine,P.O. 1116 W. 7th St., Ste. 297, Columbia, TN 38401. When Columbia, TN 38402. All rights possible, please include an old addressDyna label. Products ........................ 35 reserved. All editorial/ advertorial REPRODUCTION AND Adverti sers are................... responsible 8 submissions are used at the RESPONSIBILITY: Empire Hydraulics discretion of the publisher and may for the contents and claims of their advertising. Lumbermens™ accepts beno edited for purposes of their clarityclaims. No Great Lakes Mfg. .................... responsibility for part of this publicati on may be34 and space. Although all efforts reproduced or transmitt edhave in any form or by any means, electronic Hahn Machinery ...................... been to ensure accuracy photocopying, of or made mechanical, including recording or any information 3 content submitted by advertisers storage retrieval system, without Hurst permission of Lumbermens™.14 Boiler ............................. and writers, the Lumberman's Negatives, artwork, and other items submitted for publication in Exchange, its principles and Iron Bull Lumbermens™ are the property of adverti sers....................................

Lumbermens ™ owns21 associates, are not held liable for material typeset and/or designed by Lumbermens ™ and reserves the errors or omissions. Reproduction, Kilgore Saw ............................. 22 use outside ofwith­ Lumbermens™. Lumbermens™ will exercise in right wholeto orits part, is prohibited precauti on in writing, designing,Lignomat and printi................................. ng material contained 24 outevery written consent. within. We shallWoods not bePublishing liable for omissions or typographical errors. ©2017

- USED FORESTRY EQUIPMENT FOR SALE

❘

works,1 1/2" or 2" band, 22ft. track austin@lumbermensco.com Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434.

Austin Woods Phone: (888) 401-6367 ext. 703 austin@lumbermens.co

 liSt  Sell  exchange  buY  Save

Baker ...................................... 5, 7

on the703 mill, electronic computer Set Ext.

Cambridge, Ohio www.ohioforest.org

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703  austin@lumbermens.co Issue 364 lumbermenS  Since 1986

MAILING ADDRESS

is supported on both sides. This

Ext. 700

Ext. 704

Ext. 702 THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct sam@lumbermensco.com

DESIGN DIRECTOR

POSTMASTER

expo.com/

LOGGING & BIOMASS EXPO

*Company name and address required to process your change.

If you need to Change your Address or Add Your Name to our mailing list, then please complete this form and mail to:

DEALS OF THE MONTH .............................26 Morris Woods

AD SUBMISSIONS

(888) 401-6367

Sam x702 Joe

Sam Wall Phone: (888) 401-6367 ext. 702 sam@lumbermens.co

CARRIAGES & DRIVES

(888) 401-6367 2010 Cardinal HD Carriage Ext. 709 Carriages lumbermenSmagazine.com (Sawmill) - Cardinal joe@lumbermensco.com

Carriage line it includes carriage

with onboard log turners, carriage

drive, hyd pac for carriage, Julie Menominee Saw .....................

29 sawyers cab, computer controls, 401-6367 cabinet with electronic drives for Metal Detector's Inc(888) . ..............

30

Ext. 701 Midwest Sharpening.............. 26

carriage knees, husk including

julie@lumbermensco.com 48" bottom saw and 36" top saw

Morbark ..................................... 9

STACKING The Tree that RACit All! Started

Multitek ................................... 12

Piper's Saw Shop.................... 13

Rotochopper............................ 40

Row Electric ............................ 20

Sawmill Exchange .................. 11 Since 1986, Lumbermens™ has pub lished a month ly circular Select Sawmill ......................... 19 reaching sawmills, loggers, pallet makers, recyclers and industrial woodSawmill working........................... plants worldwide.

Smith 4 PUBLISHER The Paul Bunyan Show ......... 39

AD SUBMISSIONS May be sent to— morris@lumbermensco.com

Woods Publishing

Thomas Industrial Controls..... 10 DESIGN DIRECTOR

Union Grove Saw & Knife.. 2, 37 Ted Monnin Universal Refiner ................... 23

MAILING ADDRESS 1116 W. 7th St., Ste. 297 • Columbia, TN 38401 WoodMizer ................................ l (888) 401-6367

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

POSTMASTER Send address changes to: Lumbermens™ Magazine 1116 www.BakerProducts.net W. 7th St., Ste. 297 • Columbia, TN 38401

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 5

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO)

machine, and is currently in the LOGGING woods working daily.

INTERNATIONAL CABLE Item ID 5249. Austin x703 SKIDDER It’ll come with brand new tire JOHN DEERE 440C chains on it, Everything still works as it should, Gears shift John Deere 440C for sale, smooth, engine has no blow-by’s, Skidder has a brand new motor No leaks, been well maintained, in it, along with new clutch, Starts right up and goes to work, new pressure plate, and new He’s an old man, but could have radiator, and rebuilt steering videos available for those that box. Winch was recently rebuilt can’t go look at it. One owner as well. Skidder is tight and dry, only, and he’s retiring. A few of and will come with a full set of the good ones left out there, ice chains. Call/email for more Delivery available as well. Buyer information.

Victory Ln. // PO Box 124 Item ID 5242. Austin x703 pays13428 for trucking, About 200mi Adams Center, east of Cincinnati OH NY 13606 90′ TIMBERJACK 240A Item ID 5568. Joe x709 1990 Timberjack 240A cable Skidder that’s working TIMBERJACK 208 208 Timberjack for sale, skidder daily. Has a 5.9 cummins is pretty solid all around, has a engine. Both the engine and couple leaks, but motor fires transmission were rebuilt in right up every time. Has new 2021 with paperwork showing starter, everything else on it the work. Winch transfer case was also rebuilt shortly after. works like it should.

‘05 Gehl CTL 70 Pins and bushings are all tight, Item ID 5320. Austin x703 ItemisID: JW-986495 and woods ready. Call/Email Contact: J Williams for more informati on.

JOHN DEERE 540D Ph: (888) 401-6367 x701 Item ID 5082.

Austi n x703 ‘83 John John DeereDeere 540D cable.

Skidder has new transmission, 4850 new hydraulic pump, and all Item 14073 were recently of theID: cylinders Contact: repacked. Austin Has 23.1 tires all Ph: (888) 401-6367 around and comes x703 with new set of bear claw chains. This Skidder has been a dependable with 1700 hours, in very good condition. Easily produces high

1996 TIMBERJACK 380C 1996 Timberjack 380C 5.9 20,000lb goose 4 neckspeed trailer. Item ID Cummins, Clark 13916.

Austin x7034 forward, 4 Transmission reverse, allLog around, new Best Valuechains Portable Splitter cable, new steering pins, have - Small manufacturer in PA has chain conveyer, 8 way splitter, on

made the best valued log splitter.

Tough Meets QUALITY

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

Handles logs up to 32”. Uses

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off

of a 4 cylinder Mercedes power sales@toughseats.com inch insert tooth circle saw, 30 foot toughseats.com unit. Has a 4’ chain saw that kicks - It has a 353 Detroit diesel, 40

 Issue 364 437

Lumbermens™  since 1986

❘

running machine.

Item ID 4825. Austin x703

02′ JOHN DEERE 640G2 2002 John Deere 640G2 Cable skidder with 14000 frame hours, has new motor in it with less than 200 hours on it, and the transmission was rebuilt around the same time. Has all ‘13bearings KMCin2500 Track new the front end, as well as a new seat, new gauges, Skidder new heater, new glass, and new Item ID: lights.

Has14078 23.1’s on it with Contact: brand new Austin chains on the front.

Ph:a (888) 401-6367 x703 info.

On job now.

Call for more Item ID 4710. Austin x703 off onto a conveyor. This is a very

86′ TIMBERJACK 230A well built processor.

ID 13820.

Motor rebuilt aboutItem 10 hrs ago, Same with brakes and new Sam x702 clutch / pressure Firewood Processor -plate This is(10hrs ago), This is in good conditions, a Chomper Model 16 PDA NOT old junk. It’s good to go automatice firewood processor to work, Owner for 10+yrs, and with John powerand unitthere, with used for Deere jobs here been the family skidder, Can low hours. Control panel includes take videos of it if you can’t go tach, oil pressure, water temp and look at it, Can help trucking it amp gauges. Cuts logs up to 16”. anywhere in the US, About One owner and comes with all 80mi south of Baltimore, MD manuals receipts.

Purchased Itemand ID 3605.

Joe x709 new for $32,500. Item ID 13865.

FRANKLIN 170 SKIDDER Sam x702 Detroit 453 engine, Powershift, LOGGING EQUIPMENT

BANDIT

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703 4 speed, Winch works well, Tires size: 23.1, Center section good, Runs and operates as it should Item ID 3517. Joe x709 98′ JOHN DEERE 640E 1998 John Deere 640E cable skidder with 10000 ‘95 John Deereoriginal C6 hours, this skidder was bought Tree Farmer directly from the original Item ID: 13920 Everything owner/operator.

Contact: works like itAustin should. Call for Ph:info.

(888) 401-6367 x703 more Item ID 2701. Austin x703 98′ JOHN capacity!.

Item DEERE ID 13421.640G Sam x702 98ʹ Model John Deere 640G BARKO with 10000 original hours, 1994 Barko 160B - Electric very straight skidder that was knuckleboom, 30' boom, 75hp bought from the original owner/ motor, Rotobec continuous operator, everything works like itgrapple, should.5,000 Call for morehours. info. original Item ID 2694.

Austi n x703 (excellent condition.). Item ID 13238. Chris x700

JOHN DEERE 440C’S PACKAGE DEAL - Pumps recently redone. hrs Up for sale are two John400 Deere on injection always 440C Cablepump. skidders, onestarted is in great just totally good. shape, in goodwinch working order.

22in rebuilt and and working daily. The kohing head. head works great. other has the transmission out Item ID 13185. Sam x702 of it, the trans has been rebuilt, 1999 Barko newback engine with but has not 160D been -put in the approximately skidder.

Call for1500 morehours. info. Hour Itemdont ID 1966. n x703 meter work.Austi The last 2 owners 1995 Barko 775 B Feller Buncher

have only used it to load trucks or

as a backup as needed. Has a CTR

1999 Bandit 1900 Tracked Discfor Most delimber, grapple has been rebuilt.

Direct Bolt-In Seats Makes/Models

but electronic option is available.

adjustable to single two way. Great

Item ID: JW-909632 Contact: Williams new centerJ pins in box current Ph: are (888) 401-6367 x701good pins fine.

Minor leaks,

‘93 Barko 180B

Chipper - Cat Under Carriage at

Boom cylinders have minor leaks.

Diesel. 7500 Hours. One owner.

94 Barko 275 - Excellent value

50% or better. 475 hp Cummins

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine

Item ID 13694. Sam x702

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

with 850 HP. 5300SEATS hrs. Mill in BELL TO!” “WE KNOW SO YOU DON’T HAVE good condition. Just finished 10

1990 Bell Super T - This Bell has

855-579-0538

Acre clearing job, ready to work!

TOLL Remote control.FREE Big production

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR** EVERYTHING

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at XXXXXX www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

For all your wood processing needs FOREST PRODUCTS EXPO SOUTHWEST Fri, August - Sat, 26 August Buy Direct &25Save

Purveyors of Fine Machinery® Since 1983

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

PUBLISHER

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Escanaba, Michigan • Variable speed, 17–26 FPM machine, with air strain conveyers • 6-Row spiral cutterhead • Handwheel table height with 162 indexable carbide adjustment that go up and down, with airbags, inserts • Segmented chip breaker • Variable-speed, and infeed roller it includes two sets of Mcdonough 20–40 FPM • Heavy-duty cast-iron • Motorized table elevation construction with micro-adjust Selma, North Carolina • Lever-adjustable bed rollers pressure guides. Top Casting wheel handwheel • Footprint: 31" x 211 ⁄2" is supported on both sides. This • 6"-Thick precision-groundwww.midatlantic-logging-biomass­ MID-ATLANTIC • Shipping weight ≈ 1200 lbs. cast-iron table expo.com/ LOGGING & BIOMASS EXPO is an extremely accurate machine • Segmented chip breaker and feed rollers in ve1y good condition, Cuts 130 1 • Footprint: 40 ⁄2" x 30" • Shipping weight ≈ 1980 lbs. feet a minute also has CLT presses.

MADE MARKETING IN AN FACTORY DIRECTOR

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

MADE IN AN FACTORY

369

$

175370

$ John ONLY Williams G0696X 2795

G9961 ONLY $12,995

FREIGHT

(888) 401-6367 ext. 701 j@lumbermens.co

Heavy production shop ready

• Digital height control for REPS EQUIPMENT accurate blade positioning

• 24 ⁄8" Left cut capacity • 16" Resaw capacity • Strong rack-and-pinion table tilt mechanism • Precision-ground cast-iron table and trunnion • Computer-balanced cast-iron wheels • Footprint: 411 ⁄2" x 231 ⁄2" • Shipping weight ≈ 948 lbs.

3

Sam • Variable-speed feedWall and return conveyors (888) 401-6367 ext. 702 • Powered saw elevation sam@lumbermens.co • Hydraulic blade tensioning with gauge Austin Woods • Adjustable ceramic blade (888) 401-6367 ext. 703 guides • Footprint: 451 ⁄4" x 321 ⁄4" austin@lumbermens.co • Shipping weight ≈ 4325 lbs.

AD SUBMISSIONS

May be sent to­ 2 ⁄3 HP V/S 4-Roller Power Feeder morris@lumbermens.co For non-stop workpiece processing

POSTMASTER

• Tough and effective servo motor Send address changes to: • LED feed rate display with imperial and Lumberman's Exchange metric readings • Variable-speed adjustment dial P.O. Box 1916 • Forward/reverse feedTN 38402 Columbia, • Rack-and-pinion horizontal movement • Footprint: 51 ⁄2" x 6" The Lumberman's Exchange is • Shipping weight ≈ 132 lbs.

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretionMADE of the publisher and may AN FACTORY be editedINfor purposes of clarity T33926 ONLY $1225 and space.

Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's #GRIZZLYTOOLS Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, FINANCING AVAILABLE in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing Business to Business Equipment Financing

Item ID 13876. Austin x703 Lexington,$599 Kentucky 449 http://www.kfia.org/ G5851Z ONLY $7350 S & W 125 Band Mill with KentuckyWoodExpo.aspx $

FREIGHT

FREIGHT

Caterpillar generator - Low hours

Donna Heninger Maximize lumber yield

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367 G0504 ONLY $24,995

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

24" 71 ⁄2 HP Industrial-Duty 28" Portable Sawmill on the mill, electronic computer Set Resaw Bandsaw THE PAUL BUNYAN SHOW

16" 30 HP Dual-Conveyor DESIGN Horizontal DIRECTOR Resaw Bandsaw

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

feed deck 20 foot out feed deck 72ND ANNUAL GREAT LAKES with 44 inch wheels, and all the 24" 5 HP Planer LOGGING & HEAVY EQUIPMENT EXPO 24" 10 HP Industrial Planer Power through tough hardwoods Thurs, 7 Sept - Sat, 9 Sept Complete extended production runs bells and whistles, its a production

Since 1986, Lumbermens has 12" 5 HP Table Saw published a monthly For serious woodworkerscircular and cabinetmakers reaching sawmills, loggers, • Lockable magnetic switch for bevel angle • Digital readoutrecyclers pallet makers, and • Footprint: 221 ⁄2" x 24" • 36" Rip capacity industrial woodworking • Shipping weight ≈ 756 lbs.

• Precision-ground cast-iron table plants • Poly-V serpentine belt system worldwide.

Woods Publishing

BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly

Fri, 6 Oct - Sun, 8 Oct

Mill your own lumber

works,1 1/2" or 2" band, 22ft. track

• Modular track system for varying Cat 3406 140KW Genset, 12,400 Cambridge, Ohio lengths in www.ohioforest.org • Locking hand crank with detentshours ready to run. Item ID 13434.

1 ⁄16" increments • Leveling feet for stabilization Sam x702 • Adjustable work stops and clamp • Onboard water reservoir for blade lubrication • Footprint: 144" x 35" 2010 Cardinal HD Carriage • Shipping weight ≈ 993 lbs.

** INFO LINK** B & B Mfg. ............................... 18 SINCE 1906

MADE IN AN FACTORY

CARRIAGES & DRIVES

Carriages (Sawmill) - Cardinal Carriage line it includes carriage

M&F Gauge ............................. 28

with onboard log turners, carriage

B.$2750 H. Payne .............................. 16 SB1123 ONLY $4495 Baker ...................................... 5, 7

$ Meadows Mill, 369 Inc . ................ 33

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Designed for precision drilling Brute Force Mfg . .....................

31

knees, husk including Mobility with power Midwest Sharpening..............

26exceptionalcarriage

FREIGHT

17" Floor V/S Drill Press

FREIGHT

$ 449 drive, hyd pac for carriage,

G0901 ONLY $5795

FREIGHT

5 HP Industrial Dust Collector

• Adjustable Class II laser........ guide 36 Buck Equipment (AIM)

48" bottom saw and 36" top saw • 2.5-Micron upper Morbark .....................................

9 bag filtration

• Rack-and-pinion table elevation 32 Corley Mfg ..............................

impeller 12 Multitek ...................................

• Built-in....................

LED work light CRD Metalworks 25

casters and brakes Piper's Saw Shop....................

13 • Collection capacity: 24 Cubic feet

• Spindle speed digital readout control

• Square chuck guard with micro

switch CW Mill-ArmorHog ..............

17 1 • Footprint: 23" x 16 ⁄2" • Shipping weight ≈ 232 lbs.

• 15" Balanced steel, radial fin

• Heavy-duty steel stand with 3"

• Four-port intake manifold Rotochopper............................

40 • Footprint: 74" x 29"

CW Mill-Hogzilla ................... 15

• Shipping weight ≈ 326 lbs.

Row Electric ............................

20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8 MADE

Select Sawmill .........................

19 MADE

6995 Lakes Mfg. .................... 34 Great

Hahn Machinery ...................... 3

$ 199 ........................... 4 Smith Sawmill G0672 ONLY $1695 The Paul Bunyan Show ......... 39

Hurst .............................

PleaseBoiler visit grizzly.com for up-to-date pricing. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

IN AN FACTORY

$

T33961 ONLY $995

SHIPPING

Due to rapidly changing market conditions, our advertised prices may be changed at any time without prior notice.

WARNING! †1 : Cancer & Reproductive Harm

IN AN FACTORY

FREIGHT

STACKING RAC 249

$

FREIGHT

Some products we sell can expose you to chemicals known to the State of California to cause cancer and/ Kilgore Saw ............................. 22 Universal Refiner ................... 23 or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Lignomat ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE

❘

23209

www.BakerProducts.net 800.S48.6914 I S73.663.7711

WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

❘

 (888) 401-MENS L!

NO. 7

Phone 315.284.4126 1983 JOHN DEERE 640C Faxlogging jobs in the early 90’s 315.849.2045 John Deere 640C grappleWebsite followed by light service in www.empirehyd.com skidder, has rebuilt shot in 2018. Call/Email for transmission than info@empirehyd.com 200Emailmore information.

“Precision Under less Pressure”

hours ago, motor is strong with no blow by. Tight and has been well maintained. Call/Email for more information.

Item ID 5582. Austin x703 FMC 210 FMC 210 CA 5250 track skidder, needs the transmission rebuilt. It has a 653 Detroit motor in it with low hours.

Skidder was refurbished in 1089 used in a handful of

Item ID 5526. Austin x703

CAT 225LC EXCAVATOR Cat 225 machine starts right up, and has no big leaks. Will include a 28” and 48” bucket, also will include set of grapples.

Call for more information.

Item ID 5419. Austin x703 06′ JOHN DEERE 335 LOG LOADER Motor has brand new pump.

Does not smoke at all, New manifold, Brakes and lights all work, A/C – heat work well, Machine is dry, has no leaks, Boom is strong. Fast loader, Turn bearings are good, Owner’s health is causing him ‘16 H140as to sellHalverson it, Delivery available well.

Buyer pays for trucking, Skidsteer (DEMO) About west of Orlando FL Item 70mi ID: JW-909632 Item IDJ 5403.

Joe x709 Contact: Williams

Ph: (888) 401-6367 x701 TAJFUN EQUIPMENT Lumbermens is a proud dealer for Tajfun equipment, from logging winches, to cranes, to firewood processors, Tajfun machinery

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 437

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

makes high quality equipment.

Call us for more information and a competitive quote today!

Item ID 5368. Austin x703 1010 ‘93TIMBERJACK Barko 180B Timberjack 1010 double bunk Item ID: machine 14077 has around forwarder, Contact: Austin 15000 frame hours, and has Ph: (888) 401-6367 x703 had a lot of recent work done to it. That work includes: New Reman Perkins engine, New Radiator, Rebuilt Clark 3 speed tranny, Brand new bushings and pins in center section, rebuilt cylinders in boom and in the steering, New set of sure grip grapples, new seals in driveline. It will come with a ‘95 John Deere C6 set of eco tracks for the back, and set ofFarmer wheel track for the Tree front which are brand new.

Item ID: 13920 This is a straight machine that Contact: Austin is not busted up.

It has Ph: bent (888)or401-6367 x703 had the same owner/operator since it had 6000 original hours on it. Owner is only selling to capacity!. Item ID 13421. Sam x702 retire. Call/Email for more information. BARKO 1994 Barko 160B -Austi Electric Item ID 5358. n x703 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 9

Phone 315.284.4126 Faxevery time. Has new starter, 2022 TIGERCAT 620H 315.849.2045 2022 Model Tigercat 620H everything else on it works Website grapple skidder with www.empirehyd.com 660 like it should. original hours, has bogieEmail Item ID 5320. Austin x703 “Precision Under Pressure” info@empirehyd.com

grapple on it. 35ʺ tires, and Canadian light package, and camera in front on the grill. Skidder is in excellent shape. Call/Email for more information.

Item ID 5334. Austin x703

CAT 538 2020 Cat 538 log loader with 2800 hours on it, still has warranty available. Working daily. Call for more information.

Item ID 5302. Austin x703

TIMBERJACK 208 208 Timberjack for sale, skidder is pretty solid all around, has a couple leaks, but motor fires right up

TIMBCO 445EXL Timbco 445Exl with 8500 original hours, in excellent condition. Machine has been well maintained and serviced.

Needs nothing, working daily. Call/Email for more information.

Item ID 5293. Austin x703 2016 TAJFUN 400 JOY 2016 Tajfun 400 Joy firewood ‘16 Halverson H140 processor, unit includes log lift, and outfeed conveyer.

Machine Skidsteer (DEMO) has been a one owner/one Item ID: JW-909632 operator unit since new and Contact: J Williams isPh: in (888) excellent conditi on. Call/ 401-6367 x701 Email for more information.

Item ID 5227. Austin x703 TIMBERJACK 1270 2003 Timberjack 1270

Processor, machine is working daily and is averaging 300 cords a week currently. Owner is only selling to upgrade to a brand new machine.

Recent work includes a new ‘93new Barko 180B ECU, injectors, new fuel Item ID: 14077 pump, new fuel lines, new Contact: Austin wiring harness, new chip, new Ph: window, (888) 401-6367 x703 rear all new head cylinders, and pins/bushings, new encoders, and new seal kits. Head is super tight and has a new measuring wheel, and new rotator. Everything on the machine works as it should and currently has 24000 hours.

Item ID 5199. Austin x703

‘95 John Deere C6 PRENTICE 210B Tree Farmer

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, Mention this ad and receive chain and kicker that all runs off a FREE GIFT (with purchase)

inch insert tooth circle saw, 30 foot

unit. Has a 4’ chain saw that kicks

 Issue 364 437

automatice firewood processor

Handles logs up to 32”. Uses

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

a Chomper Model 16 PDA

of a 4 cylinder Mercedes power

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

210B ce Knuckleboom, ItemPrenti ID: 13920 comes with reversible csi Contact: Austin bucksaw.

Ph: (888) Works 401-6367everyday, x703 has joystick control, all new hoses on the boom, brand new grapple as well. Pretty tight capacity!.

ID 13421. and good Item loader.

Only Sam thingx702 it BARKO does need is brakes.

Item ID 5085. n x703 1994 Barko 160B -Austi Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

My Machine is Built-Rite... IS YOURS? NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

Escanaba, Michigan

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

it includes two sets of Mcdonough

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

New direct drive feed roll system to POSTMASTER Sendhandle address changes to: the most Lumberman's Exchange crooked logs P.O. Box 1916

that go up and down, with airbags,

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

DESIGN DIRECTOR

AD SUBMISSIONS

bells and whistles, its a production

machine, with air strain conveyers

pressure guides. Top Casting wheel

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

MODEL 40-C

feed deck 20 foot out feed deck

with 44 inch wheels, and all the

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

MARKETING DIRECTOR

MAILING ADDRESS

10 hours on this machine since it

has been rebuilt, it has a 24foot in

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

BUILT-RITE

Danckaert Band Resaw - Roughly

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Dyna Products ........................ 35

Sawmill Exchange .................. 11

STACKING RAC

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

with onboard log turners, carriage drive, hyd pac for carriage,

cabinet with electronic drives for Detector's Inc. .............. 30 New fully greaseable MetalEasy replaceable Brutesplitter Force Mfgslides . .....................

Sharpening on 31 Midwest splitter slides.............. and 26 carriage knees, husk including 48" bottom saw and 36" top saw Buck (AIM) ........ 36 Morbark ..................................... allEquipment high production removable main 9 Corley Mfg .............................. 32 Multitek ...................................

12 machines wedge Hydraulic multi-wedge Columbia, TN 38402 CRD Metalworks .................... 25 Piper's Saw Shop.................... 13 system to maximize The Lumberman's is Rotochopper ............................

Triple multiExchange wedge, 6wayCW onMill-ArmorHog front, 4way.............. & star178way or 10way on back.40 your splitting quality published monthly by Woods CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 May be sent to­ morris@lumbermens.co

Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

Bell's Machining ..................... 27

BUILT-RITE FORESTRY EQUIPMENT LLC

Hurst Boiler ............................. 14 Thomas Industrial Controls..... 10 Matthew Palmer, Owner Iron Bull ................................... 21 Union Grove Saw & Knife.. 2, 37 116 Brook Rd., Cavendish, VT 05142 Kilgore Saw ............................. 22 Universal Refiner ................... 23

www.Built-Rite.com

Lignomat ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE

❘

800-757-2520

WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY l§

❘

www.BakerProducts.net info@built-rite.com 800.S48.6914 I S73.663.7711

 24/7 SUPPORT 0

❘

 (888) 401-MENS L!

NO. 11

Phone 315.284.4126 Faxthe pumps rebuilt. Good, solid LIEBHERR A312 WITH RYANS HEAD 315.849.2045 loader everything on it works Website 1998 Model Liebher A312 mobile as it should. Call/Email for www.empirehyd.com Email wheeled excavator with 9300 more information.

“Precision Under Pressure” info@empirehyd.com

hours, equipped with newer Ryans saw head attachment. Both in good condition, the excavator has all new hoses, good tires, new lights, and back up camera. The Ryans head has low hours as well.

Item ID 4979. Austin x703

13′ BARKO 595ML MAGNUM 2013 Barko 595 Magnum loader has 11000 original hours, equipped with 264 Csi delimber. Recently had two of

Item ID 4974. Austin x703

18′ JOHN DEERE 753J 2018 John Deere 753J with 6000 original hours. Ready to work, only selling to downsize.

Has good undercarriage, and hotsaw head. Call/Email for more information.

Item ID 4968. Austin x703 BELL SUPER T CUTTER Bell Super T 3 wheel machine,

has the deutz air cooled engine, with a 30” dangle head.

Inside the cab it has levers for controls, and does also have air conditioning. Tires are size 28L and will come with chains as well. Overall in good condition, ‘16ready Halverson H140 and to work. Call/Email for more informati on.

Skidsteer (DEMO) ItemID: ID 4952.

Austin x703 Item JW-909632 Contact: J Williams CAT D5H TSK Ph: (888) 401-6367 x701 Cat D5h TSK track Skidder with 3700 original hours, 32” pads, and good undercarriage at around 80%. Ready to work. Call/Email for more

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 437

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

good condition. Just finished 10

Acre clearing job, ready to work!

Remote control. Big production

 List  seLL  exchange  buy  save

information.

Item ID 4939. Austin x703 643J 2007 643J cutter with 12,700 hrs, thinning saw head, 28LX26 ‘93new Barko 180B tires, starter,batt eries, alt, Item ID:rebuilt, 14077 motor runs gear box Contact: great uses Austin no oil, does have (888) 401-6367 x703 a Ph: Hydraulic leak or 2, needs a bushing in one of cylinder arms, also comes with a 843J parts machine, has a tpost saw head,motor and Hydraulics are good 30k for both Item ID 4907. Austin x703 04′ TIGERCAT 620 2004 Tigercat 620 Tigercat ‘95 John Grapple skidderDeere has brandC6 new engine in it, with less than 10 Tree Farmer hours on it, and comes with a Item ID: 13920 year warranty.

Machine itself Contact: Austin is Ph: prett y tight, speed x703 control (888) 401-6367 valve is new, main pumps are fairly new as well. Has heat/Ac, every function on the skidder capacity!.

13421.

Sam x702 works.

CallItem forID more info.

BARKO Item ID 4705 . Austin x703 1994 Barko 160B - Electric

2009 JOHN 30' DEERE knuckleboom, boom,548G3 75hp 2009 John Deere 548G3 with motor, Rotobec continuous 7700 original frame hours, grapple,is5,000 original hours. skidder tight, and has a new (excellent engine in condition.). it with lessItem thanID400 hours on it.x700 New 28L tires, 13238. Chris Everything machine works 1995 Barkoon 775the B Feller Buncher like it should. Call for more info.

- Pumps recently redone. 400 hrs Item ID 4699. Austin x703

on injection pump. always started

good. good working order. 22in 14′inJOHN DEERE 748H 2014 John Deere 748H model with kohing head. head works great.

15000 everything Item IDframe 13185. hours, Sam x702 works like it should. Recently had 1999 Barko 160D - new engine with new pins and bushings, and new approximately 1500 hours. Hour motor installed just over a year meter dont work.

The last 2 axles. owners ago.

Equipped with sweda Call foronly more info. have used it to load trucks or ID 2707.

AustiHas n x703 asItem a backup as needed. a CTR delimber, grapple has been rebuilt.

2016 HYPRO 755HB PROCESSOR Item IDis13694.

SamVersati x702 le 276 Tractor a 1985 94 Barkothat 275 - has Excellent value tractor a flex plate between the engine and pumps, with low at hours at 3,500. 5.9 equipped with skid plate CUMMINS continuous grapple. under the engine, and some Runs Great!. Item ID 13740. Sam new lights. Engine is a 140HP x702 cummins, and has 3200 hours BELLonly has 350 on it. The Hypro hours on itSuper and is great shape.

1990 Bell T -inThis Bell has Call for more informati on a brand new Duetz engine. Lever Item ID 2593. Austin x703

Boom cylinders have minor leaks.

control, 33” bar, pump and tranny ❘

 LumbermensCO.com

TIMBCO 425D Timbco 425D – Year 2001 – Quadco 20 360 degree head – 8.3 Cummins – Hours 7000 / 300 hours on caterpillar undercarriage – new planetary spindle. bearings and one seals in both sides.

Tree Item IDThe 1429.

Austin x703

that Started 725B it TIMBERPRO All!

Well Maintained machine, tight Since 1986, Lumbermens and dry work ready with has a Rolly published a monthly II head. make an offcircular er! Call for reaching sawmills, loggers, more pictures. pallet makers, recyclers and Item ID 1398. Austin x703

industrial woodworking plants worldwide.

PUBLISHER

The

Woods Publishing

ADVERTISING SALES

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS Tires are at 60%, comes with ’92 TIMBERJACK 450C LOG LOADER spare tire. Text FIELD or email for EXCAVATOR LC and 10K frame hours – singleNY archSTATE – a WOODSMEN'S See pictures, 225 prices, DAYS pictures power-shift trans – tire size 28Ls 1986 Caterpillar excavator with aat Fri, 18 more August - Sun, 20 August Location of all equipment Item ID 1124.

3208 engine 5000 hours, total hours – Tire tread: 20% front, 70% back Boonville, New York www.LumberMB\ISmagazine.com – 5.9 cummins – Winch works – is 19000, Grapple, heals, bucket.

Marcus (660) 833-9061

www.starwebhosting.net/woodsmen/ center section is tight – no major slack, dry machine, no leaks TIMBERJACK SOUTHWEST1979 FOREST PRODUCTS230 EXPO Item ID 1369.

CABLE Fri, 25 August - Sat,SKIDDER 26 August Robert (606) 875-4783 1979 Timberjack 230 Cable Hot Springs, Arkansas Skidder. Starts and runs www.arkloggers.com TIGERCAT 822 perfect. Excellet condition, ANNUALtiGREAT LAKES res. Eaton Winch, Item ID 1130. Austin x70372NDExcellent LOGGINGStraight & HEAVY EQUIPMENT Blade.

Call for EXPO more Thurs, 7 Sept - Sat, 9 Sept pictures.

460 TIMBERJACK Michigan Item ID 1072.

New Motor, new center pins, Escanaba, Kyle (807) 631-4081 and Hyd Pump Cummins = MID-ATLANTIC LOGGING & BIOMASS 100hours on the new parts ,

Item ID 1067.

BANDMILLS & HEADSAWS Mose (208) 290-1888

Danckaert Band Resaw - Roughly

PRENTICE 384 since it 10 hours on this machine

KNUCKLEBOOM LOADER has been rebuilt, it has a 24foot in

2002 prentice 384 Knuckleboom. feed deck 20 foot out feed deck Saw not included. Mounted on with inch wheels, the ’89 S 442500 Internatiand onalalltruck. bells and whistles, its a production Knuckleboom carrier/trailer also available. machine, with air strain conveyers Item ID 978. Austin x703 that go up and down, with airbags, it includes two sets of Mcdonough

Fri, 15 Sept - Sat, 16 Sept

WOOD-PAKER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

The Number One Bundling Machine Line for PackagedCARRIAGES Firewood & DRIVES Austin Woods

** INFO LINK**

2010 Cardinal HD Carriage (888) ext. 703 B &401-6367 B Manufacturing is in the foothills of the Allegany Mountain range in Olean, New austin@lumbermens.co (Sawmill) - Cardinal York.

We have been in business since January 1985 producing woodCarriages bundling systems called “THE WOOD-PAKER” for the firewood and waste wood industry.

We line have geared MAILING ADDRESS Carriage it includes carriage B Mfg . ...............................

18 producers.

M&F Gauge .............................

28 Box 1916 our P.O. machinery to meetB & the needs of various We offer several different types of with onboard log turners, carriage Columbia, TN 38402-1916 equipment for packaging wood from shrink wrapping, stretch33wrapping and bagging.

B. H.your Payne ..............................

16 Meadows Mill, Inc. ................ drive, hyd pac for carriage, (888) 401-6367 However you wish to BUNDLE we have a system for you.

AD SUBMISSIONS

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

May be sent All to­ these systems provide convenient packaging of30waste-wood, cabinet with electronic drives for Inc. ..............

Bell's Machining .....................

27 Metal Detector's morris@lumbermens.co slabs, edgings and firewood for the consumer market.

POSTMASTER

Brute Force Mfg. ..................... 31

carriage knees, husk including

Midwest Sharpening.............. 26

48" bottom saw and 36" top saw

Buck Equipment (AIM) ........ 36 Morbark .....................................

9 Send address changes to: THE WOOD-PAKER LINE INCLUDES: YOUR ONE-STOP SHOP FOR Lumberman's Exchange BUNDLING SUPPLIES Corley Mfg 32 Multitek 12 • The WOOD-PAKER: 6 models of.............................. the HEAT SHRINK oven ...................................

P.O. Box 1916 Columbia, system.TN 38402 CRD Metalworks .................... 25 Piper's Saw Shop.................... 13

STACKING RAC

• The WRAPPER: person stretch wrap unit17electric and ............................ 40 The Lumberman's Exchange is Single CW Rotochopper Mill-ArmorHog .............. published monthly by Woods manual available.

CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 Publishing, P.O. Box 1916, • The Columbia, TNBAGGER: 38402. All rightsA conveyor system using horizontal mesh Dyna Products ........................ 35 Sawmill Exchange .................. 11 reserved.bags.

All editorial/ advertorial submissions are used at the Empire Hydraulics 8 Select Sawmill ......................... 19 • The TILT BAGGER: Single person unit................... using mesh bags. discretion of the publisher and may be edited for purposes of clarity Great Lakes Mfg. .................... 34 Smith Sawmill ........................... 4 and space. Although all efforts have Affordable and Easy toMachinery Operate • 3INCREASE YOUR The Paul Bunyan Show ......... 39WOOD PROFITS! Hahn ...................... been made to ensure accuracy of content submitted by advertisers WOOD-PACKAGING has come into its own.

Hurst Boiler ............................. 14 Thomas Industrial Controls..... 10 and writers, the Lumberman's Exchange, its principles and Iron Bull ................................... 21 Union Grove Saw & Knife.. 2, 37 associates, are not held liable for errors or omissions. Reproduction, Kilgore Saw ............................. 22 Universal Refiner ................... 23 in whole or part, is prohibited with­ B & B Manufacturing • 3007 West River Road • Olean, NYwww.BakerProducts.net 14760 Lignomat ................................. 24 WoodMizer ................................ l out written consent.

800.S48.6914 I S73.663.7711 E-mail: bbmfg@verizon.net • www.thewoodpaker.com ©2017 Woods Publishing

716-373-5881

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

❘

 (888) 401-MENS L!

NO. 13

Phone 315.284.4126 Faxas it should, This is his back-up TIMBERJACK 380C dozer, why he’s selling. Doesn’t GRAPPLE SKIDDER 315.849.2045 Website 1994 timberjack 380Cwww.empirehyd.com 5.9 need it much anymore, Delivery Cummins, 12 Pressure” valve, 4 speedEmailavailable as well. Buyer pays for “Precision Under info@empirehyd.com

Clark transmission 4 forward 4 reverse, external tranny cooler, 28L’s, tranny less than 1000 hours, motor redone no blow by, centers redone recent, no leaks, dry very minor seep on valve body and grapple controls.

Rear ends redone a year ago, full time 4 wheel drive, John Deere winch, good winch, strong winch! Call for more pictures!

Item ID 863. Sam x702

trucking, About 50mi south of Cincinnati OH Item ID 5388. Joe x709

JOHN DEERE 648D new main drive shaft, motor rebuilt 200 or so hours ago, rebuilt fuel injector, hydraulic rebuilt, grapple rebuilt, w/winch single arch tight machine 60% rear 40% front 28l’s Item ID 547. Sam x702

16′ JD 700K 6 Way blade, Fully Enclosed cab, Forestry Package with winch, Wide pads, A/C – heat work, Owner has had it sine purchase.

Now done with his project.

Got himself something else, smaller, All controls work as they should, These go for $170$175K anywhere you look (for the year), and without a winch.

This one has everything. Have a reliable trucker available. Buyer pays for trucking, About 150mi south of Louisville, KY Item ID 4343. Joe x709

JOHN DEERE 550G

06′ JD 700J LGP

replaced, U/C tread: Approx. 75%, 20 inch pads, Direct drive, Pedal steer, Winch works well, it’s the JD 4000 series, Everything works

55%, Has no mechanical issues, been taken care of, The owner is done with a project he bought it for, Have a reliable trucker

13428 Victory DOZER Ln. // PO Box 124 CRAWLER Enclosed cab, Winch strong, New Adams Center, New head gasket, Both fiNY nal 13606 drives sprockets go with it, Undercarriage

available. Buyer pays for trucking, About 80mi south of Louisville, KY Item ID 3787. Joe x709 12′ JD 550K LGP Rollers sprockets, chain and pads all re-done about 75hrs ‘16 Just Halverson H140 ago, had a John Deere 4000hrs service, All fluids an Skidsteer (DEMO) upgrades up to date, No Item ID: are JW-909632 issues, very clean, no leaksI’d say Contact: J Williams machine is mint, Tracks are 24 Ph: (888) 401-6367 x701 inches with a 10’2” wide blade, Brand new U/C, 95%, Forestry package with winch, Enclosed cab, A/C and heat works and everything else, Owner is going with a bigger dozer, Ready to go to work, really solid dozer!

Information provided is to the best of our knowledge and what owners tell us Item ID 3753. Joe x709

‘13 KMC 2500 Track Skidder JD 550G LT

Mid model, Original Item 90’s ID: 14078 hours, Forestry package with a Contact: Austin winch.

It pulls good, tread: Ph: (888) 401-6367 UC x703 about 70%, Nothing wrong whatsoever with dozer, Been well kept and usedThis sporadically off onto a conveyor. is a very by him and his son, little jobs

GANG RIP SAW

Firewood Processor - This is a Chomper Model 16 PDA

SF04060

USes 10”, 12“ and 14” Blades toItem ID: JW-986495 MAKE UP TO 8 RIPS AT once, LAserContact: J Williams line projector, 22-125 FPM POWERPh: (888) 401-6367 x701 CONVEYOR, UPPER AND LOWER ‘83 FEED John Deere ANTI-KICKBACK FINGERS, 40HP 4850SPINDLE MOToR, 2 HP CONVEYOR chain conveyer, 8 way splitter, on Item ID: 14073 MOTOR, INFEED TABLE, OUTFEED20,000lb goose neck trailer. Item ID Contact: AustinHEIGHT ADJUSTMENT, TABLE, DIGITAL Ph: (888) 401-6367 x703 6” DUST PORT, BLADE ACCESS DOOR13916. Austin x703

quality chips with patented ‘Cone’ drum design. Can easily load 42’

Handles logs up to 32”. Uses

13HP Honda motor. Manual start

MSRP $26,999

vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 437

but electronic option is available.

$19,995

Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and

O S

Best Value Portable Log Splitter

Not available online- Small manufacturer in PA has call: 360.243.5438 condition. Easily produces high Ships from Bellingham, Wa 98229made the best valued log splitter. with 1700 hours, in very good

automatice firewood processor

homemade processor with a 10’

amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Tree Farmer

CAT D6K2 Item ID: 13920 2015 model in excellent Contact: Austin condition, currently has401-6367 1750 hours, Ph: (888) x703has enclosed cab with heat and air, undercarriage is around 75%, working daily. Call for more info capacity!.

IDAusti 13421.n Sam x702 Item ID Item 1488. x703

BARKO

92′160B CAT- Electric D5H 1994 Barko

Item ID 4678.

Joe x709 knuckleboom, 30' boom, 75hp

D L

well built processor. Item ID 13820.

Sam x702

‘05 Gehl CTL 70

here and there, They’re buying a skidder with the money they get from this, why are they selling it, Have a reliable trucker available. Buyer pays for trucking, In KY, about 90mi.

‘93ofBarko north Nashville180B TN Item ItemID: ID14077 3686. Joe x709 Contact: Austin Ph: (888) 401-6367 x703 14′ JD 650K LGP 29 inch pads, All bushings are tight, Dry, no leaks, Pre def emission delete engine turned up 20hp, Forestry package, Winch on it only been used about 600hrs, 10 foot 4 inch blade, Owner is retiring, Can help trucking it anywhere in the US, In the Fresno, OH area ‘95 Deere C6 ItemJohn ID 3574.

Joe x709

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine

motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

LIMITED EDITION: ONE-OF-A-KIND GRIZZLY MACHINE

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

with 850 HP. 5300 hrs. Mill in

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

CARRIAGES & DRIVES

LINK** Carriages (Sawmill) - Cardinal Field Proven Design forINFO the Independent Hardwood Sawmill MAILING ADDRESS

2010 Cardinal HD Carriage

Carriage line it includes carriage

B & B Mfg . ...............................

18 M&F Gauge ............................. 28- Two proven P.O. Box 1916 • Corley lnfeed and Edger with Lewis Optimization with onboard log turners, carriage Columbia, TN 38402-1916 B. H. Payne .............................. 16 Meadows Mill, Inc. ................ 33 drive, hyd pac for carriage, (888) 401-6367 names with proven results Menominee Saw .....................

29 Baker ......................................

5, 7 sawyers cab, computer controls, AD SUBMISSIONS May be sent to­ cabinet with electronic drives for • True HardwoodBell's Optimization Machining ..................... 27 Metal Detector's Inc. .............. 30 morris@lumbermens.co carriage knees, husk including Brute Force Mfg. ..................... 31 Midwest Sharpening.............. 26 • Small footprint that fits inside most existing mills POSTMASTER 48" bottom saw and 36" top saw Buck Equipment (AIM) ........ 36 Morbark ..................................... 9 Send address changes to: Exchange •Lumberman's Value priced with allMfgof.............................. the optimization capability12 of more Corley 32 Multitek ...................................

P.O. Box 1916 Columbia, TN 38402 CRD Metalworks ....................

25 Piper's Saw Shop.................... 13 elaborate high speed Edger Optimizers

STACKING For more information on our new "M" Series Edger RAC and

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

other Corley and Lewis products, give us a call.

LEWIS CONTROLS CORLEY SAWMILL OPTIMIZATION MACHINERY Chattanooga, Tennessee Iron Bull ................................... 21

Kilgore Saw ............................. 22 Phone 423-698-0284 Lignomat ................................. 24

www.corleymfg.com

- USED FORESTRY EQUIPMENT FOR SALE

❘

Cornelius, Oregon

Union Grove Saw & Knife.. 2, 37

Phone 503-648-9119

Universal Refiner ................... 23

www.BakerProducts.net

WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY l§

www.lewiscontrols.com 800.S48.6914 I S73.663.7711 ❘

 24/7 SUPPORT 0

❘

 (888) 401-MENS L!

NO. 15

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com



“Precision Under Pressure”





No. 1 on the

industry tradeshow charts

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

04′ JD 450H Wide tracks, limb raisers, AC/ Heat, all controls work, Dozer is in really MINT conditions, One original owner, used for local jobs, not a major operation, He’s now 70yrs old and he’s ‘16 Halverson H140 willing to sell. He’s using it for one more week (DEMO) or so to finish Skidsteer aItem little ID: jobJW-909632 he has left, Have a reliable trucker available. Buyer Contact: J Williams pays for trucking, About Ph: (888) 401-6367 x70140mi south of Nashville, TN Item ID 4327. Joe x709 90′ JD 550G He has all of the side cab screens and the rock guards, Winch is strong, New hydraulic pump, New transmission pump, New batteries, U/C is at about 60% tread, New front idler & track adjuster, Runs ‘13 KMC 2500 Track well, no issues, Direct drive, Skidder Been serviced regularly, all the paperwork avail., Owner is Item ID: 14078 done with Austin the project, letting Contact: itPh: go,(888) Have401-6367 a reliable trucker x703 available.

Buyer pays for trucking, Better pictures avail. upon About off ontorequest, a conveyor.

This is 100mi a very south of Columbus, OH well built processor. Item ID 13820.

Item ID 3873. Joe x709 Sam x702



‘05 Gehl CTL 70

NASHVILLE, TN   ‘83 John Deere AUG 6-8, 2025 4850

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703



with 1700 hours, in very good

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID



13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

Exhibit Space Reservations

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per

made the best valued log splitter.

Handles logs up to 32”. Uses

13HP Honda motor. Manual start but electronic option is available.

Now open

day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

SFPAEXPO.com FIREWOOD Visit PROCESSORS log deck. Has a hydraulic grapple, 2010 Shop Built Wood Processor chain and kicker that all runs off to Secure Yourof aSpace Today!

- It has a 353 Detroit diesel, 40 4 cylinder Mercedes power inch insert tooth circle saw, 30 foot  Issue 364 437

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Firewood Processor - This is 02′ CASE 650H 4BT Cummins a Chomper Model engine, 16 PDA Wide tracks, Open ROPS, Underautomatice firewood processor carriage tread: 80%, 2 owners with John Deere power unit with only. Current owner owned it low 2yrs. hours.Owner Controlispanel includes for retiring and tach, oil pressure, wateruse tempofand doesn’t make much it, Every control works.

Alltoworks amp gauges.

Cuts logs up 16”. and operates as itwith should, One owner and comes all Videos available for serious manuals and receipts. Purchased inquiries, Can help trucking new for $32,500.

13865. it anywhere in Item the ID US, About Sam x702 60mi south of Kansas City, MO Item ID 3511.

Joe x709 LOGGING EQUIPMENT

BANDIT

03′ JOHN DEERE 1999 Bandit 1900 Tracked Disc 648G III SKIDDER ChipperMeter - Cat Under Carriage at Hours Reading: 13000, 50% or better.

475 hp Cummins Tires size: 28L 26, Axes 1400, A/C works, heat One good, Winch Diesel.

7500 Hours. owner. works fi ne, Direct Drive Well maintained. Item ID 13294. machine, Transmission was reSam x702 built at 10000 hours by current 2004 Bandit Beast Model 4680 - by owner, Engine re-done 3412 Caterpillar Diesel engine previous owner, about 4yrs ago, Owner smaller, with 850bought HP. 5300ahrs.

Mill ina bit newer skidder, Delivery available good condition.

Just finished 10 as well. Buyer pays for trucking, Acre clearing job, ready to work!

About 90mi west of Birmingham Remote control. production AL, Informati onBigprovided is to

 List  seLL  exchange  buy  save

the best of our knowledge and what owners tell us Item ID 5647. Joe x709 ’95 JOHN DEERE 548G II SKIDDER ‘93 Barko 180B New reman motor put in Item ID:ago 14077(all receipts 4-5mo.

Contact: Austin available).

Work done by Ph: (888)Enterprises 401-6367 x703 Schaefer in Wolf Lake, IL, Skidder will be ready for delivery on/around Nov. 16, because bottom center pins are currently being re-done, Almost all new U-joints thru the drive line, Skidder was at work every day until last week, now at shop for pins, Diff. lock works, Tires size: 28L’s ‘95 John C6all (Primex), Tires Deere tread: 80% around, Turn cylinders are reTree Farmer packed, Everything works as it Item ID: 13920 should, 1yr owner.

Reason for Contact: Austin selling he has another x703 skidder Ph: (888) 401-6367 bought, needs $$$ back in his pocket, Delivery available as well. Buyer pays for trucking, capacity!.city ItemisIDJeff 13421.

SamMO, x702 Closest erson BARKO 80mi south of it Item ID160B 5605.

Joe x709 1994 Barko - Electric knuckleboom, 30' boom, 75hp

TIMBER JACK 450B GRAPPLE SKIDDER grapple, 5,000engine original hours.

Cummins strong, (excellent ID no issues,condition.).

It’s got Item a winch, works well, x700 Tires tread: 60%, 13238. Chris Powershift Everything work 1995 Barko ,775 B Feller Buncher and operates as it should, All - Pumps recently redone. 400 hrs controls work, Owner has had injection started itonfor many pump. years, always he’s old and good. in good 22in reti ring, why working selling, order.

Delivery available as well.

Buyer pays kohing head. head works great. for trucking, 60mi north Item ID 13185.About Sam x702 of Atlanta, GA 1999 Barko 160D - new engine with Item ID 5452. Joe x709 motor, Rotobec continuous

approximately 1500 hours. Hour

meter dont work.

The last 2 owners 12′ JD 648H Engine is used stillit to going strong, have only load trucks or original motor.

Previous as a backup as needed.

Hasowner a CTR re-built it at around 9000hrs, delimber, grapple has been rebuilt.

Tires size: 30.5, Tires tread: Boom cylinders have minor 50-60% all around, A/C leaks. and Item ID 13694.

Sam x702 heat work, Grapple and winch both work well, Centervalue section 94 Barko 275 - Excellent iswith good.

Previous owner low at hours at 3,500. 5.9had center section re-done (5yrs+ CUMMINS continuous grapple. ago), Owner has had it for Runs Great!.

Item Sam 5yrs+, getting ridID of13740. one crew, x702 Delivery available as well.

Buyer pays forBELL trucking, About 90min. north 1990 Belldrive Super T - This west Bell hasof Orlando, FL a brand new Duetz engine. Lever Item ID 5253. Joe x709 control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 17

Phone 315.284.4126 Faxdaily. Call/Email for more info.

TJ 450B 315.849.2045 5.9 Cummins engine, Tires size: Item ID 4944. Austin x703 Website 30.5’s, Tires tread %: about www.empirehyd.com 70% all around, Esco grapple,Email 98′ TJ 460 “Precision Under Pressure” info@empirehyd.com

Winch works, Can have owner do videos for those that can’t go look at it, Delivery available as well.

Buyer pays for trucking, About 60mi. north of Jackson MS Item ID 5098. Joe x709

JD 648L Dual arch, Center section is tight, Tires tread: approx.

40% front, 60% back, A/C – Heat work, Pins are tight, no leaks, Clean woods ready skidder, Owner is changing business, going into trucking, Have a reliable trucker available. Buyer pays for trucking, About it and 70mi north of Jackson, MS Item ID 5073. Joe x709

Cummins motor (put on approx. 2yrs ago), Tires size: 28L’s, Tires tread: approx. 40% all around, New 1” main line on 120” grapple, Charge pump replaced a few years back, New EGS shifter, Winch works fine, Original Cummins motor, Being used as a spare skidder. Owner makes little use of it, why he’s selling, About 150mi. east of St. Louis, MO by Evansville, IN Item ID 4918. Joe x709

98′ CAT 515 Will have more pictures for serious inquiries, Single arch, Transmission has been rebuilt, before owner bought it 4years ago, 50 ton CAT winch, Only thing owner has done to it is he replaced the internal filter up 13428 Victory Ln. 610E // PO Box 124 under belly pan, A/C doesn’t 15′ TIGERCAT NY 13606 2015 Adams model Center, Tigercat 610E work, Heat does, Other than that, grapple and winch, dual arch he’s had no issues. Only reason Skidder. Has 8400 frame hours, for selling is he can’t keep people with brand new hydrostats. at work, so…. he’s selling, Have a Skidder is currently working reliable trucker available. Buyer

99′ FRANKLIN 170 5.9 Cummins engine, Powershift, Tires tread: 70-80% on all of ‘16 Halverson them, Enclosed cab,H140 Single arch, ESCO grapple, Machine Skidsteer (DEMO) needs work, Center Section Item ID: JW-909632 isContact: good, Owner is just getting J Williams rid of his last skidder.

Have a Ph: (888) 401-6367 x701 reliable trucker available. Buyer pays for trucking, About 90min. drive north west of Orlando, FL. Information provided is to the best of our knowledge and what owners tell us. We just broker it Item ID 4586. Joe x709

13′ JD 648H Motor was rebuilt 16 months ago, Tires size: 30.5’s, Tires tread: back 100%, front 3040%, Missing door on engine compartment on the right side, ‘93 Barko 180B Center pins are good, A/C and Item ID:work, 14077 heat both This skidder only Contact: Austin logged 1-3 days a week for the Ph:2(888) x703Dual past years.401-6367 Spare skidder, arch, Winch is missing the cable, owner never used the winch at all, Owner just put $2k worth of new pins and bushings on the boom, Grapple works, no leaks.

Starts right off, Can help trucking it anywhere in the US, About 160mi south of Tallahassee, FL Item ID 3589. Joe x709

02′ TJ 660D 3800hrs on rebuild motor, done 3yrs ago by current owner, Dual ‘13 KMC 2500 Track arch, Cummins engine, Tires size Skidder 30.5×32’s, Tires tread: 30% , He owned it for14078 3yrs and he’s getting Item ID: out of logging now, Have a reliable Contact: Austin trucker available.

Buyer pays for Ph: (888) 401-6367 x703 trucking, About 140mi south of Springville, MO. It’s in Arkansas Itema ID 4088. Joe off onto conveyor.

Thisx709 is a very

2006 ItemTigercat ID: 13920635C Bogie Skidder, hasAustin a 8.3 Cummins Contact: engine, with401-6367 a lot ofx703 recent Ph: (888) work done, including totally new updated bogies, new front tires, rebuilt motor, and other capacity!.

Item IDhas 13421.

Samwell x702 work.

Skidder been BARKO maintained and is ready for the woods.

Call160B for more info.

1994 Barko - Electric Item ID 3322 knuckleboom, 30' boom, 75hp

Sam x702

grapple, 5,000 original hours.

pays for trucking, About 100mi north of Johnstown, PA Item ID 4671. Joe x709

well built processor. Item ID 13820.

Firewood Processor - This is a Chomper Model 16 PDA

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 437

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

3-5

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

‘95 John Deere C6 06′ TIGERCAT Tree Farmer635C

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 19

Phone 315.284.4126 Faxsize: 30.5×32, Clark transmission, TJ 460D Center pins are re-done, ti315.849.2045 ght,Website 3 gears, Clark winch, Owner has no play, Owner redid the top of the doors for it, Owner is in NO www.empirehyd.com the motor, Under because he had to doEmailHURRY to sell, will only sell for “Precision Pressure” info@empirehyd.com

a crank seal, Winch works, but needs a cable (broke last winter), Transmission re-done by private mechanic by previous owner, right before current owner bought it, Inside cab is clean, all controls work, A/C works, heat, too, Center section pins re-done, just like new, Tires size: 30.5’s, Tires tread: 70-80% all around, with chains coming with it, Bushings in the grapple are re-done, Motor re-done at 10000hrs by previous owner, about 4yrs ago. Owned for 3 yrs. He bought it off of a friend that quit logging, About 90mi south of Syracuse, NY Item ID 3286. Joe x709

$44K, nothing less, About 130mi east of Pittsburgh, PA Item ID 3233. Joe x709

02′ CAT 525B Approx. 4000hrs ago transmission, and engine were re-done right before current owner bought it 2yrs ago. No winch, Center pins have a lil’ wear, but can pull just fine as it is. Owner will include brand new center pins and all needed parts he bought to get them changed, but never got around to do it, Tires size: 30.5, Tires tread: 50% all around, always been used with chains, Tire chains don’t come with it. Owner put them on his new skidder, Inside CLARK F666 RANGER cab, all controls, functions work.

This machine is as GOOD and as Seat in great shape still, Heat TIGHT as they come for being works, A/C works but doesn’t 13428 Victory PO Box 124 blow too cold, maybe needs a an old Clark, It’s a Ln. new//Cummins Center, NY 13606 engine, Adams Heater works, A/C re-charge, Owner upgraded to a doesn’t, Torque Converter, no CAT C series, doesn’t need this clutch, New cradle pins/bushings, anymore, He’s had no issues the One is loose one on the main time he’s had it, everything else grapple, Grapple is rebuilt, Tires works as it should, Been parked

since May, Everything else works and operates as it should, About 150mi north of Boston, MA Item ID 3214. Joe x709 00′ JD 748G III Hours Meter Reading: 16000 ‘16New Halverson H140 +/-, bearings, Main boom bushings re-done, It has a Skidsteer (DEMO) brand A/C unit in it, Tires Item new ID: JW-909632 size:35’s, Tires tread: approx.

Contact: J Williams 50-60% all around, Ph: (888) 401-6367Center x701 pins have a lil’ play, but not bad, Motor is strong, no blow-by, Transmission needs clutch packs for 1st and 2nd gear (5-10K fix).

Machine will move, but won’t pull a log in 1st & 2nd gear.

All other gears work smooth.

Owner doesn’t log anymore, and sees no need of fixing it, Owner bought it from a friend who owned it for 5yrs. He has had ‘13 KMC 2500 Track it for 2yrs now, no issues, just Skidderit and put $10,000+ maintained inItem it without much use. About ID: 14078 30-35mi east of Gainsville, FL Contact: Austin ID401-6367 3210. Joex703 x709 Ph:Item (888) 15′ CAT 525D Frame hrs: less thanThis 13000, New off onto a conveyor. is a very motor put in at 10K hrs. Private

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

vans and produce 6 - 8 loads per

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

tach, oil pressure, water temp and

good. in good working order. 22in

low hours. Control panel includes

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 437

but electronic option is available.

50% or better. 475 hp Cummins

adjustable to single two way. Great

Well maintained. Item ID 13294.

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a Rotary Dryers homemade processor with a 10’ Sand Dryers log deck.

Has a hydraulic grapple, Grain Dryers Lumber chain andKilns kicker that all runs off Cement Kilns of a 4 cylinder Mercedes power Brick Kilns unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

(excellent condition.). Item ID

- Pumps recently redone. 400 hrs

Has Log Lift. Uses 4-way wedge

quality chips with patented ‘Cone’

grapple, 5,000 original hours.

with John Deere power unit with

day. Item ID 13882. Austin x703

condition. Easily produces high

motor, Rotobec continuous

automatice firewood processor 1995 Barko 775 B Feller Buncher Clean-Burn Design

drum design. Can easily load 42’

with 1700 hours, in very good

98′ JOHN DEERE 648 ‘95Model JohnJohn Deere 98ʹ Deere C6 648 skidder in good conditi on, has Tree Farmer new transmission in it with less Item ID: 13920 than 500 hours on it, engine Contact: Austin has in the past, Ph:been (888)rebuilt 401-6367 x703 and doesn’t have any blow by or leak any oil. It could use a new rotator for the grapple. capacity!.

Item ID all 13421.

Sampins x702 Other than that, of the BARKO and bushings are tight, and the skidder is ready the woods.

1994 Barko 160B -for Electric Item ID 2798.

Austi x703 knuckleboom, 30' boom,n75hp

Innovative 13238. Chris x700

a Chomper Model 16 PDA

amp gauges. Cuts logs up to 16”.

Manufacturing a full line of biomass fired One chain conveyer, 8 way splitter, on combustion systems backed with fifty years of owner and comes with all 20,000lb goose neck trailer.

Item ID manuals and receipts. Purchased innovative clean-burn design. Diverse in every way with multi-fuel blending capability.

Hurst 13916. Austin x703 new for $32,500. Item ID 13865. stokers utilize hundreds of common and Sam x702 Best Value Portable Log Splitter abundant solid biomass fuels.

- Small manufacturer in PA has Large or small scale, project LOGGING EQUIPMENT management is eased with the made the best valued log splitter.

BANDIT impressively short installation time Handles logs up to 32”. Uses 1999 Bandit 1900 Tracked Disc required with prefabricated 13HP Honda motor. Manual start Chipper - Cat Under Carriage at modular components.

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

mechanic installed it. Can provide invoices of work done, Dual arch, No winch, A/C and heat both work fine, Center section pins done in 2020, Tires tread: 50%, Tire chains come with it, Transmission was re‘93byBarko 180B done CAT, when CAT started Item ID: redoing the14077 D models, couple Contact: Austinis getting out years ago, Owner (888)Owner 401-6367 x703one ofPh: logging, will throw brand new spare tire with sale, Everything works as it should, Owner is selling his logging equipment after being a logger for 40 yrs., About 250mi north of Albany, NY Item ID 3172. Joe x709

Diesel. 7500 Hours. One owner.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

on injection pump. always started kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

50

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

YEARS control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

BANDSAW

BLADES

STATEAvailable!

WOODSMEN'S FIELD DAYS All NY Sizes

Fri,economical 18 August - allSun, TOP PERFORMING, blades for primary20 & August secondary wood processing.

Welded to yourNew lengths!York Boonville, We also offer expert sharpening services, plus...

www.starwebhosting.net/woodsmen/

Gang • Edger • Scragg • Trim • Split • Strob ....and just about any Custom Saws you need to keep you cutting longer... for less. Ask about FREE Shipping!

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

©2019 Wood-Mizer LLC

BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept Call Marvin Miller for a quote

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

Escanaba, Michigan 231-924-5953 (fax) 402-966-2752 / 37590 E. Anderson Bridge Rd • Kilgore, NE 69216

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough

ROW ELECTRICAL EQUIPMENT, INC.

PUBLISHER

Woods Publishing

MID-ATLANTIC

ADVERTISING SALES

LOGGING & BIOMASS EXPO

• Squirrel Cage Motors • Gear Motors • Wound-Rotor Motors • Synchronous Motors • DC Motors

MARKETING DIRECTOR John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Fax to:

419-244-8887

Donna Heninger

pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine

YOUR SOURCE FOR USED, RECONDITIONED:

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

DESIGN DIRECTOR

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

EXPO •KENTUCKY DC Motors -WOOD Crane and Mill •Fri, Adjustable 15 Sept Speed - Sat,Drives 16 Sept • Generators and DC Lexington,- AC Kentucky • Engine-Generator Sets http://www.kfia.org/ •KentuckyWoodExpo.aspx Transformers, Single Phase

in ve1y good condition, Cuts 130 • Transformers, Three-Phase feet a minute alsoStarters has CLT presses.

• Across/Line Magnetic • Reduced Voltage Starters Item ID 13876.

Austin x703 • SafetySSwitches & W 125 Band Mill with • Phase Caterpillar Convertorsgenerator - Low hours

on the mill, electronic computer Set 800-248-4479 works,1 1/2" or 2" band, 22ft. track

P.O. Box 2812 • Toledo, Ohio 43606

THE PAUL BUNYAN SHOW WWW.RoWELECTRiCAL.CoM Fri, 6 Oct - Sun, 8 Oct

419-248-4479 rowelec@glasscity.net sales@rowelectrical.com Cat 3406 140KW Genset, 12,400 Cambridge, Ohio Sam Wall www.ohioforest.org hours ready to run. Item ID 13434.

WE ANSWER THE PHONE 24 HOURS • WE BUY USED ELECTRICAL (888) 401-6367 ext. 702 EQUIPMENT REPS

sam@lumbermens.co

** INFO LINK**

CARRIAGES & DRIVES When You Buy Your Circular2010 Saws From B.H. Payne Cardinal HD Carriage You’ve Bought the best...Carriages We Guarantee It! (Sawmill) - Cardinal

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

BellAD Ultra T on SUBMISSIONS May be sent to­ Tracks

morris@lumbermens.co Item ID: 14023 Contact: Sam POSTMASTER Ph: (888) 401-6367 x702 Send address changes to:

Lumberman's Exchange with winch, P.O.direct Box drive.

1916 Comes with 6000 hour extended warranty.

Columbia, TN 38402 Has only 2600 hours. Has new

The Lumberman's Exchange is 30.5 X 32 26 ply on rear and 70% published monthly by Woods on front. Still new1916, skidder and Publishing, P.O.aBox priced to sell.

Item ID Columbia, TN 38402.

All13696. rights Sam reserved.

All editorial/ advertorial x702 submissions are used at the 2013 JD 848H Grapple Skidder discretion of the publisher and may 4200 hours.

Tires at 50%.

Winch. be edited for purposes of clarity Very goodAlthough runningall condition.

Pins and space. efforts have been madeMachine to ensure is accuracy of are tight. dry. Engine content submitted by advertisers runs great. Item ID 13555. Sam and writers, the Lumberman's x702 Exchange, its principles and 1991 Johnare Deere 640Dliable Skidder associates, not held for errors omissions.

Reproduction, - 23.1or x 26 Tires 50%, Rebuilt in whole or part, is prohibited with­ Trans.,Good Tight Machine. Item out written consent.

ID 13191. Sam x702 ©2017 Woods Publishing

B & B Mfg. ............................... 18 B. H. Payne .............................. 16

‘16 Halverson H140 Skidsteer

Baker ...................................... 5, 7 Bell's ..................... 27 Item Machining ID: JW-192810 Contact: J Williams

Brute Force Mfg. .....................

31 Ph: (888) 401-6367 x701 Buck Equipment (AIM) ........ 36 Corley Mfg 32 does great job.............................. in hardwood. Priced

Carriage line it includes carriage Traditional Quality Combined M&F Gauge .............................

28 with onboard log turners, carriage Sanborn Scragg With Todays Technology Meadows Mill, Inc. ................ 33 drive, hyd pac for carriage, Quality Brand Reg. U.S. Pat Off

Mill Call 800 752-0627

‘05 CATSaw TK560 Menominee ..................... 29

sawyers cab, computer controls, Circular Saws Item ID: 14050 Item ID: 14004 Make Sure To Ask For Our Free, Complete Saw Catalog Saw Bits and Shanks cabinet with electronic drives for Contact: Austin Woods Metal Detector's Inc. .............. 30 Contact: Circular Sam Knives We Manufacture & Sell Inserted Tooth Headsaws, Solid (888) 401-6367 Ext. 606Tooth carriage knees, husk including Carbide Tipped Saws Ph: (888) 401-6367 x702 Midwest SharpeningSaws, ..............

26Tooth Cutoff Saws & Carbide Saws. We also Inserted Carbide Strobe ® Saws 48" bottom saw and 36" top saw B.H. Payne & Company Stock & Sell Morbark .....................................Bits 9 & Shanks, Carbide Tips, Diamond Wheels, 1977 (est) FMC 220CA Tracked 13910. Austin x703 Saw Manufacturers

STACKING RAC

rims. Still 50% tread left on these

Empire Sam x702Hydraulics ................... 8

Select Sawmill .........................

19 2012 Refurbished FMC 210 Tracked

John Deere 20 hole Sweda wheels

CW Mill-ArmorHog .............. 17

- These 50’s are mounted on hard

to find 20 hole John Deere sweda15 CW Mill-Hogzilla ...................

Dyna Products ........................ 35

tires. 4 available. Item ID 13852.

Great LakesFABTEK Mfg. .................... 34

2004 Fabtek 546C Forwarder -

Hahnrunning Machinery ......................

Good condition.

30.5 tires3 in front Boiler at 60%..............................

650 tires in back at Hurst 14 60% and come with tracks. Front

Grapple Saw - Good running condition.

Piper's Shop ....................

13

Sawmill Exchange .................. 11 x702

There are a few leaks, but nothing

Skidder - 1976 Model that has been

Franklin 3000 - 4BT Cummins

B.H. Payne & Company, Inc.

Smith P.O. Sawmill Box 90608........................... 4 totally refurbished in 2012. No

East Point, GA 30364 ......... 39 The Paul Bunyan hours since updatesShow were done.

404 761-8711 Fax 404 761-5398 tracks. Detroit 6V53 engine with

Includes Industrial warranty on machine Thomas Controls .....and 10

Union Grove Saw & Knife.. 2, 37

Double ID 13363. Sam22 Kilgorebunk.

SawItem .............................

“Since 1890” transmission.

Clark ...................

40,000 lb Universal Refiner 23

Lignomat ................................. 24

WoodMizer ................................ l

1995 JD 290D with Hytec 4700

1977 (est) FMC 220CA Tracked

New Paint. Item ID 12731. Sam

condition. Engine just overhauled.

Detroit 6V53 cranks and runs

blade. JD engine. One owner. x702

FMC

195HP. Clark 28000 Powershift

Winch. ROPS Cab. Includes bolt

onE-mail: grappleinfo@paynesaws.com head with full function.

Skidder❘ - Good running unit. x702 Head - 290D in good FOR SALE  SELL YOUR EQUIPMENT -Harvester USED FORESTRY EQUIPMENT l§ TODAY well. Military style tracks at 70%.

Ite Con Ph:

Franklin 170 Skidder - This would

Here’s What You Get With Every B.H. Payne Saw be a great starter skidder. It is • Saws manufactured from only the Highest Quality Alloy Steel.

Front blade.

Detroit 6V53 engine. a single archNickel with winch.

Runs Rotochopper ............................

40 Each Saw Milled withfit State-Of-The-Art Precision CNCgood.

Milling Machine.

No• winch....they cannot with good and pulls Detroit 453 • We Tension Your Saw to Yourstyle RPM Speed Leaving Ourshift Factory. swing boom grapple.

Military turboBEFORE and 3 speed power Row Electric ............................

20 • Your Satisfaction - Completely tracks at 70%.

Item ID 13227. SamGuaranteed. transmission. Good center section.

to sell!.Metalworks Item ID 12206.

Sam x702 25 CRD ....................

‘11

Knife Grinding Wheels, Saw Gumming Wheels & Knives.

Multitek ...................................

Skidder w/ESCO Swing Boom 12

Iron Bull ................................... 21

Undercarriage at 50%. New water

Sam x702

❘

major. Item ID 13819. Sam x702 engine with approximately 600

hours. Needs tires. Good machine for the money and for a start up

company. Item ID 13786. Sam x702

2003 Franklin Q80 Grapple Skidder - 7500 hours, but just 5000 hours

‘05 Tr Lo

Item Con Ph:

on reman engine. New Radiator;

www.BakerProducts.net

New Hydraulic Pump; Comfort Web800.S48.6914 Site: www.paynesaws.com I S73.663.7711 cab with good working heat and

Wara

at 80%.

Item ID 12450.  24/7 SUPPORT air; ❘ Tires  (888) 401-MENS NO. 21 Comp L! 0 Sam x702 10500

FRANKLiN

1995 Franklin 170 - Enclosed cab,

GMC

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

20

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder

LUMBERMEN’S

LUMBERMEN’S Equipment Digest

BARKO www.lumbermenonline.com 1994 Barko 160B - Electric

off onto a conveyor. This is a very

knuckleboom, 30' boom, 75hp

Sam x702

grapple, 5,000 original hours.

well built processor. Item ID 13820.

Firewood Processor - This is

‘05 Gehl CTL 70 PROTECT Them ALL ® Wrap With Pro-Tec-To ‘83 John Deere a Chomper Model 16 PDA

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

4850

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

2000 W900 KW w/ Hydraulic Lines – Fuel Lines One owner and comes with all chain conveyer, 8 way Hoses splitter, on – Air Item ID: 14073 Rotobec MT27 20,000lb goose neck trailer.

Item ID manuals and receipts.

Purchased Contact: AustinElectric Wire Bundles – Control Cables Heavy Spec

13916. Austin x703

Best Value Portable Log Splitter

new for $32,500. Item ID 13865.

Sam x702 Item ID: 13993

® Contact: Austin with 1700 hours, in very good -® Small manufacturer in PA has LOGGING EQUIPMENT PRO-TEC-TO WRAP & PRO-TEC-TO SLEEVE

Ph: (888) 401-6367 BANDIT x703

condition. Easily produces high the best valued log splitter.

CUT YOURmade DOWNTIME AND YOUR COSTS! quality chips with patented ‘Cone’

Handles logs up to 32”. Uses 1999 Bandit 1900 Tracked Disc Protection Against Pinching, Crushing, Rubbinghours & Abrasion on this machine, in excellent drum design. Can easily load 42’ 13HP Honda motor. Manual start Chipper - Cat Under Carriage at – EVEN UV RAYS! Both are Impervious to Oils and Solvents. condition.

Item ID 13937. Austin vans and produce 6 - 8 loads per

but electronic option is available.

day. Item ID 13882. Austin x703Protection Hasfor LogLogging, Lift. Uses 4-way wedge Provides Maximum

EDGERS & GANGS adjustable to single Construction & Stationary Applications Like: two way. Great

Brewco Saws - Two Brewco Value!

ItemMasts ID 12062. Sam x702 • Debarker Buggies Saws • Pantograph Arms PA. • Forklift

50% or better. 475 hp Cummins x703 Diesel. 7500 Hours. One owner.

For The Distributor LIEBHERR WellNearest maintained.

ID 13294.

You,Item Call 2007 Liebherr A924C Log Handler

Sam x702 800-355-1250 Rubber Tired Log Loader. 13,000

• Wheel Loaders • Skidder • Knuckleboom in excellent condition.

Runs great. Grapples Firewood ProcessorLoaders - This is a 2004 Bandit Beast Model 4680 Visit hours. 40’ Reach or with two section • Fellerbuncher Heads • Stroke Item ID 13644.

Sam x702Heads • Harvesting homemade processor with a 10’www.pro-tec-toproducts.com 3412 Caterpillar Diesel engine boom. 60” Log Grapple with Delimbers • Dozer Blades FIREWOOD PROCESSORS log deck. Has a hydraulic grapple, with 850 HP. 5300 hrs. Mill in continuous rotation. Fixed Cab ® Anywhere Hoses & Wires Are – Pro-Tec-To Products 2010 Shop Built Wood Processor chain and kicker that all runs off good condition.

Just finished 10 OEM’s, Repair Facilities & Riser with cab guard protection.

Offers Maximum Protection, Lower Costs, Reduced Distributor Inquires Welcome - It has a 353 Detroit diesel, 40 Acre clearing job, ready to work! of a 4 cylinder Mercedes power Downtime and Less Spills!

Front push blade. Tight and dry. inch insert tooth circle saw, 30 foot Remote control. Big production unit. Has a 4’ chain saw that kicks Cleaned, Serviced, and Checked

 Issue 364 437

Lumbermens™  since 1986

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Item ID: 14078 PO Box 1146 Contact: Austin Columbia,capacity!.

TN 38402-1146 Item ID 13421. Sam x702 Ph: (888) 401-6367 x703 1-800-477-7606 Fax (931) 388-3564

13428 Victory Ln. // PO Box 124 Equipment Adams Center, NY 13606 Digest

Ph: (888) 401-6367 x703

Ite Co Ph

❘

out for service. Can pull loaded  List  seLL  exchange  buy  save  Issue 364

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

‘14 Lo

One Item Con Ph:

on injection pump. always started

good.CAT in good953C workingFrontorder. 22in ‘04 2011 kohing head. head works great. end Loader Log Item ID 13185. Sam x702

engin Item ID: 13854 1999 Barko 160D - new engine with Contact: Sam 11,23 approximately 1500 hours.

Ph: (888) 401-6367 x702Hour secti

meter dont work. The last 2 owners

have only used it to load trucks or trailer. 4-Wheel drive and steering. as a backup as needed. Has a CTR Top Quality machine. Would be delimber, grapple has been rebuilt. great for log yard or mill work.

Boom cylinders have minor leaks.

Item ID 13476. Sam x702 Item ID 13694. Sam x702 2011 Liebherr A904 Rubber Tired 94 Barko 275 - Excellent value Log Handler. Liebherr 4 cylinder with low at hours at 3,500. 5.9 engine with great fuel economy.

CUMMINS continuous grapple.

11,230 hours. Fixed cab riser. Two Runs Great!. Item ID 13740. Sam section boom with 38’ reach. Cab x702 protection. 4-Wheel drive and

BELL

steer. Can pull loaded trailer.

1990 Bell Super T - This Bell has Cleaned, serviced and inspected. a brand new Duetz engine. Lever Tight and dry and ready for work. control, 33” bar, pump and tranny Located in Baltimore, MD. Item ID

prote

steer

traile

inspe

for w

MD.

1997

Pierc

on 60

Good

just s

delim

1987

MOT 13477. Sam x702 ❘  LumbermensCO.com

Lumbermens  since 1986

❘

 List  seLL  exch

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan Schutte Hammermill

Grinder

MID-ATLANTIC LOGGING & BIOMASS Item ID: 13965 Fri, Contact: 15 Sept -Austin Sat, 16 Sept

PUBLISHER

Woods Publishing MID-ATLANTIC

ADVERTISING SALES

LOGGING & BIOMASS EXPO

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Selma, North Carolina Ph: (888) 401-6367 x703 www.midatlantic-logging-biomass­ expo.com/

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW 2013 Fri, 6 OctCaterpillar - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

535C Cambridge, Ohio

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

www.ohioforest.org Item ID: 13868 Contact: Sam Ph: (888) 401-6367 x702

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly

10 hours on this machine since it ‘01 Benson 34’ End has been rebuilt, it has a 24foot in Dump feed deck 20 foot out feed deck

Item ID: 13818 with 44 inch wheels, and all the Contact: Sam bells 401-6367 and whistles, its 603 a production (888) Ext. machine, with air strain conveyers

that go up and down, with airbags, 19 it includes two sets of Mcdonough

44

pressure guides. Top Casting wheel Item is supported on both sides. This is an extremely accurate machine

Con Ph:

in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Mag 64-knive Item ID 13876. Austin x703 Source Grinder

S & WID: 125 Band Mill with Item 14007 CaterpillarAustin generator - Low hours Contact: Ph: (888) 401-6367 on the mill, electronicx703 computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, swing motor.

Has new jet fit 12,400 hours ready to run.

Item ID 13434. system. This machine is loaded...

Sam x702 system for cold has pro-heat

CARRIAGES• & Value DRIVES IntegrIty • PrecIsIon • QualIty FW-16 FIREWOOD WRAPPER INFO LINK**

**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

B & B Mfg. ............................... 18

P.O. & Box 1916TO SHIP! IN-STOCK READY

H. Payne Cord..............................

King M44 16 John Deere 640 WrapperB.‘15 401-6367 The Go(888) Fast Firewood Item......................................

ID: 13961 Baker 5, 7 Grapple Skidder AD SUBMISSIONS produces better firewood Columbia, TN 38402-1916

Contact: Austin Item#May 13848 be sent to­ Bell's Machining .....................

Ph: (888) 401-6367 x703 27 bundles than the rest. morris@lumbermens.co Contact: Sam Ph: 401-6367 x702 The(888) FW-16 Firewood Wrapper Brute Force Mfg. ..................... 31 POSTMASTER

Buck Equipment (AIM) ........ 36 changes to: isSend builtaddress with true gear reduction, computer and Scorpion controls, Lumberman's Exchange Corleyspeed Mfg control. ..............................

2 sets of 32 1996 Timbco FB w/2008 P.O.T425B Box 1916 large bearings, and heavy-dutyadded Columbia, TN 38402 tracks all new Lexan.

Located in25 Rotosaw Intermittent Saw Head.

CRD ,Metalworks ....................

frames, outlasting the Machine has 540Exchange degree non The Lumberman's is competition. published monthly by Woods

continuous rotation on upper. 9900

Alberta, Canada. Customer will 17 CW Mill-ArmorHog .............. pay shipping to closest US entry CW Mill-Hogzilla ................... 15 point. Item ID 13532. Sam x702 Dyna ProductsStroke ........................

1998 Timberline Delimber 35 -

Publishing, P.O. Box 1916, hours. New Undercarriage. New Columbia, TN 38402. All rights reserved. advertorial glass in All cab.editorial/ Very good running submissions are used at the Empire Hydraulics ...................

8400 hours.

U/C at 60%.

Will crank8 condition. Rotosaw has 360 degree discretion of the publisher and may and run.

Owner retired.

Machine rotation.

Cummins engine be edited for purposes6CT8.3 of clarity Great Lakes Mfg. .................... 34 • space.

1/3HPAlthough 120V Motor • Wheel Kits and all efforts have idle for past year. Item ID 13599. with 215 HP. Machine runs great.

Hahn Machinery ...................... 3 been made to ensure accuracy of • Fork Pockets • Automatic Sam x702 Wrap Cycle!

Working in selectbyhardwood content submitted advertiserstoday.

Hurst Boiler ............................. 14 and writers, the Lumberman's 1999 Timbco 820D Clam Bunk Item ID 13548. Sam x702 Production Without Compromise Exchange, its principles and Iron Bull ...................................

Forwarder - 10,300 hours. New 21 1997 Timbco 820C Clam Bunk associates, are not held liable for - THAT’S THE GO FAST WAY errors or omissions.

Reproduction, less than 500 hours ago. 22 Forwarder - “4000” original hours. engine Kilgore Saw ............................. in whole or part, is prohibited with­ Can accept bunks, but none with24 20.3 x 25 rubber at 70%.

Hand Lignomat ................................. out written consent. machine.

Owner has two sets of sanded and painted, brand new ©2017 Woods Publishing

Simple, Safe, and Reliable.

Standard Features:

Options:

1-800-854-7439 WWW.GOFASTMFG.COM

tracks like new he will add for

additional $20,000. Item ID 13494.

Sam x702 M&F Gauge ............................. 28 1999 Timbco TF-820D Forwarder Meadows Mill, Incnew . ................

33 11k hrs on machine, Cummins

weather start. Has fire suppression 2010 Cardinal HD Carriage system.

All working!

Hydraulic

Carriages (Sawmill) Cardinal Oil just totally changed-(100 new

58 withSam onboard 13598. x702 log turners, carriage Ch Carriage line it includes carriage gallons) with new filters. Item ID

Woodmaster

Menominee Saw8k ..................... engine at around hrs and has29

‘94 Caterpillar 320

2000 Timbco w/33" Bar Saw drive, hyd 425D pac for carriage,

Head.

40 degree tilt on head.

540 sawyers cab, computer controls,

‘88 John 440Dfor degree rotation on upper body. fresh drive pump & imp. pump.30 cabinet with Deere electronic drives Metal Detector's Inc . ..............

See why we are your BeSt Source for bandsaw blades!

One year old Cummins 6CT8.3 28L 26 tires some great, some carriage knees, husk including Skidder Midwest Sharpening.............. 26 Item ID: 13781 engine.

Resealed pumps.

Rebuilt decent.

Machine is ready to work, We offer the highest quality welds and our people use thesaw 48" bottom saw and 36" top Item ID: 13936 Mor bark .....................................

9 Contact: Sam valve bank.

90% undercarriage. but could use a little fixing here highest level of integrity and precision to give you the best Contact: Austin Ph: (888)hot 401-6367 x702 Multitek ...................................

12 Can accept saw.

Firethe US. and the401-6367 bucket sloppy Ph:there.

(888) x703 bandsaw bladesis in the business—we ship all over

Union Grove Saw .. 2, 37 1981main Timberjack 520&pump, - Knife Very hard to new hydraulic new oil come by!

Detroit.

Runs Great!. cooler, all 653 main cylinders repacked.

Universal Refiner ...................

23

Rema

Equip

Speed

STACKING W thIn Kerf RAC Band saw Blades

suppression system. Auxiliary oil could stand be pinned and 13 Piper's SawtoShop ....................

Satisfaction always guaranteed! in veryGood goodrunning shape and has been cooler. machine. bushed.

No major issues!.

Item ID Rotochopper............................ 40 well maintained.

Item ID 4000 hours.

Torque convertor Item ID 13549. Sam x702 12194.

13212. Sam x702 Row Electric ............................

20 Sam Timbco x702 445D - Recent engine transmission.

14 hole wheels.

Tires 2000 2000 Timbco 415D w/2005 Fabtek Sawmill Exchange ..................

11 ‘98 Timberjack 1270B -New 7,300 hrs. are 30.5’s at 55% and one at 80%. and pump last winter.

4-Roller Processor - 21,000 hours

Center hasNew veryJD little slack. This19 Select Sawmill ......................... on meter.

6 cylinder skidderinhas been a7000 backhours. up skidder engine 2011 has Smith Sawmill ...........................

4 for the years. Skidder has U/C at several 65%. Extensively rebuilt The Paul Bunyan Show ......... 39 12000new hours.

Item ID 13805. with swing motor, new Sam charge Thomas Industrial Controls..... 10 x702 pump, new high speed saw motor,

Item Con Ph:

Perkins 6 and Cylinder Engine.

All sprockets rollers.

22” quadco modules and computer are brand hot saw. Owner retired. Located in

new. TiresItem on average areSam around Montana.

ID 13790. x702 Ask About Our 80% Video: http://youtu.be/R_ 2005 TimberPro 830TF Forwarder

Dismanteling Blades

Item ID 13572.

Chris -MQZe5QEFw. 6580 hours. Very good condition. x700 Tracks for all bogies. 710/45-26

VALMETbolsters tires at 70%. Includes 1998back Valmet 603 3-Wheeled Item ID 13741.

Sam x702 and rest.

Comes with 36” Package includes extra final drive, www.BakerProducts.net WoodMizer ................................ l ck CheuTimberjack Our Quality • Our Service • Our t 800.S48.6914 I S73.663.7711 Buncher 6500 hours onPrice total 2002 608s with hot saw grapple with grapple saw option. extra computer screen, and extra O

1-888-857-5153

40% c

Ite mach

Co main

Ph

Hard

of con

avail Item 2005

Forw

hydr

box i

2012.

pump

cond

machine but no hours on 4BT3.9 - Approx. 6000 hours, Machine is hour.

‘89 FORESTRY EQUIPMENT FOR SALE ❘  SELL YOUR EQUIPMENT TODAY  ❘ buy  24/7 SUPPORT ❘ L!  (888) 401-MENS NO. 23 - USED 0 Issue 364 Lumbermens  since 1986 l§ ❘  List  seLL  exchange  save ❘  Lumbermensmagazine.com Item  Issue 364 Lumbermens  since 1986 ❘  List  seLL  exch

Con

3

3

e. Just

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

INDUSTRY NEWS

'Stacker Dudes' from Automated Industrial Technologies Rebrand Machine Division to Max Board Feet (MAX) ‘93 Barko 180B “Precision Under Pressure”

Automated Industrial Technologies® (AIT), a recognized leader in process engineering and manufacturing automation, has renamed its wood processing machinery division. The new division name, Max Board Feetrn, (www.MaxBoardFeet.com) aptly describes their automated wood processing equipment, which includes highspeed saws, stackers, notchers, conveying systems, and a variety of custom machines. MAX offers expert engineering services to design and build systems and production lines around customers' unique requirements. They specialize in processing pallet cut stock and boards. Max Board Feet designs and produces its equipment in Forest, Virginia, and sells to

Every Reputable Wide Band Supplier Offers

3 High Quality Swedish Steel 13428 Victory // POWidth Box 124 3 3” – 8”Ln.Band Adams Center, NY 13606 3 16 to 20 Gage 3 Double Cut Options 3 Choice of Swage or Stellite

WOLVERINE

BUT ONLY THE

BY MENOMINEE SAW GUARANTEES • Cutting Edge Plasma Welds ‘05 Gehl CTL 70 • The Industry’s HighestItem Band Capacity ID:Saw JW-986495 Contact: J Williams • Quick Delivery from our HUGE Inventory Ph: (888) 401-6367 x701 ‘83 John Deere & Exchange Program • Fast Sharpening 4850to Keep YOU Running chain conveyer, 8 way splitter, on Item•ID: 14073 Competitive Pricing 20,000lb goose neck trailer. Item ID Contact: Austin 13916. Austin x703 Ph: (888) x703 And401-6367 ONLY Menominee Gives You Everything

Value Portable Log Splitter You need in a WideBest Band Saw – Plus

with 1700 hours, in very good

- Small manufacturer in PA has

quality chips with patented ‘Cone’

Handles logs up to 32”. Uses

Expert Service from the Industry’s Most made the best valued log splitter.

Knowledgeable Staff.

condition. Easily produces high

Got aload Wide Problem? drum design. Can easily 42’ Band 13HP Honda motor. Manual start Call Menominee and You’ll vans and produce 6 - 8 loads per Saw butToday electronic option is available.

Whyx703 More Mills Trust day. Item ID Learn 13882. Austin Has Log Lift.the UsesPro! 4-way wedge EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

adjustable to single two way. Great

TOLL FREE 1-800-582-0470 homemade processor with a 10’

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

FIREWOOD900 PROCESSORS log deck. Has hydraulic grapple, 16th St., Menominee, MIa49858

Wood Processor chain kicker that all runs off 906-863-2609 Fax: and 906-863-1147 r PT 2010 Shop BuiltTel: Email: info@menomineesaw.com diesel, 40 of a 4 cylinder Mercedes power aling - It has a 353 Detroit

WWW.MENOMINEESAW.COM

inch. inch insert tooth circle saw, 30 foot

unit. Has a 4’ chain saw that kicks

customers worldwide H140 in the softwood andID: hardwood ‘16 Halverson Item 14077 industries.

"Customers often refer to us asContact: the ' Stacker Dudes'," said Austin Skidsteer (DEMO) Gary Sill, founder and CEO of AIT.Ph: "But we 401-6367 are more than that.

(888) x703 Item ID: JW-909632 The name Max Board Feet really spells out what our equipment Contact: J Williams does for our customers: it maximizes production in terms of Ph: (888) 401-6367 x701 board feet."

The company suggests the new brand better represents the substantive increase in efficiency that customers gain by deploying its high-speed wood processing equipment, from saws to stackers and more.

Looking to know more about how this equipment can ‘95 Deere C6 improve your bottom line? MAX off ersJohn a free ROI Calculator Worksheet to demonstrate the payback on their machinery.

Tree Farmer "The new division name and brand is meant to help our customers Item ID: 13920 recognize that MAX's machines areContact: worthy ofAustin the investment."

‘13 KMC 2500 Track continued Sill.

Ph: (888) 401-6367 x703

Skidder

ENGINEERING EXPERTISE Item ID: 14078 BEHIND THE WOOD PROCESSING SOLUTIONS Contact: Austin capacity!. Item ID 13421. Sam x702 Max Board Feet (MAX) Ph: (888) 401-6367 x703 core products include stackers, saws, BARKO notchers, chamfering machines, singulators, and conveyors, all off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

30’ reach on the boom. Joystick

Skidder - Very good running

(Continued on page knuckleboom, 30' boom, 75hp25} motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

Ite Con Ph:

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

‘05

with low at hours at 3,500. 5.9

good condition. Just finished 10

 Issue 364 Lumbermens™  since 1986 ❘ 437  List  seLL  exchange  buy  save roatation on the grapple w/ a 2006 Tigercat 630C Grapple Model

s

1994 Barko 160B - Electric

a brand new Duetz engine. Lever

‘99 51

 LumbermensCO.com

Item Con Ph:

❘

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

SAFETY ALERT

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

Instructor Injured During Chainsaw Safety Training Workshop SOUTHWEST FOREST PRODUCTS EXPO BANDMILLS & HEADSAWS Boonville, New York www.starwebhosting.net/woodsmen/

Danckaert Band Resaw - Roughly BACKGROUND Fri, 25 August - Sat, 26 August The Tree On a brisk but sunny January day in the Southeastern US, an was 10 hours on this machine since it Hotinstructor Springs, Arkansas Started hostingthat a chainsaw safety training workshop at a fenced-in workshop and training www.arkloggers.com has been rebuilt, it has a 24foot in compound. itAtAll! the end of the training, in the mid-afternoon, the instructor and feed deck 20 foot out feed deck 72ND ANNUAL one young staff member were setting up two pine logs on support skid using GREAT LAKES with 44 inch wheels, and all the Since Lumbermens has attached to a farm tractor. Both LOGGING & HEAVY EQUIPMENT EXPO a log1986, grapple (lifting tongs} individuals published a monthly circular were wearing personal protective equipment: hard hats, steel-toed Thurs, 7 Sept - Sat, 9 Sept bells and whistles, its a production reaching sawmills, loggers, boots, high-visibility vests, leather gloves, safety glasses and hearingEscanaba, Michigan machine, with air strain conveyers pallet makers, recyclers and protection. that go up and down, with airbags, industrial woodworking plants MID-ATLANTIC LOGGING & BIOMASS worldwide. it includes two sets of Mcdonough UNSAFE ACTS AND CONDITIONS Fri, 15 Sept - Sat, 16 Sept PUBLISHER The staff member was operating the farm tractor, moving logsSelma, North Carolina pressure guides. Top Casting wheel Publishing from aWoods nearby storage area to the training site. Once a log was www.midatlantic-logging-biomass­ is supported on both sides. This MID-ATLANTIC transported to the training staff member would lower the ADVERTISING SALES site, theLOGGING expo.com/ & BIOMASS EXPO is an extremely accurate machine log ontoMorris two support Woods skids. The instructor would then move in to in ve1y good condition, Cuts 130 (888) 401-6367 ext.

704 manually release the log grapple and swing them on top of theKENTUCKY WOOD EXPO feet a minute also has CLT presses. log.morris@lumbermens.co The second log that was placed on the skids initially had Fri, 15 Sept - Sat, 16 Sept tooMARKETING much overhand on one side for training purposes; therefore, the staff member lifted the log again andIDmoved it into x703 the right DIRECTOR Item 13876. Austin Lexington, Kentucky position.John When the log was lowered, one of the four corners of the log grapple became caught on a support skid, allowing the tractor Williams http://www.kfia.org/ S & W 125 Band Mill with (888) 701 boom to 401-6367 be looselyext. supported on the log grapple.

KentuckyWoodExpo.aspx Caterpillar generator - Low hours

j@lumbermens.co

ACCIDENT on the mill, electronic computer Set DESIGN DIRECTOR THE PAUL BUNYAN SHOW Unaware of the dangerous situation, the instructor proceeded to manually release the log grapple.

When getting into position, Donna Heninger works,1 1/2" or 2" band, 22ft.he track Fri, 6 Oct - Sun, 8 Oct noticed the log grapple was caught on one corner and observed that the wood underneath the corner was breaking loose. Before he Cat 3406 140KW Genset, 12,400 Cambridge, Ohio EQUIPMENT REPS could move out of the way, the weight of the boom broke off the wood and suddenly opened the log grapple, swinging wide-open Sam Wall www.ohioforest.org hours ready to run. Item ID 13434. and(888) striking the instructor 401-6367 ext. 702 in the face. sam@lumbermens.co

Sam x702

INJURY CARRIAGES & DRIVES Austin Woods The instructor did not lose consciousness but did stumble backward and the lowered himself to the ground. Injuries included a 2010 Cardinal HD Carriage (888) 401-6367 ext.

703 deep laceration below the lip and extensive dental damage, as several upper front teeth were broken during the accident. austin@lumbermens.co Carriages (Sawmill) - Cardinal The young staffer asked if he should call 911 and offered to drive the injured instructor to a nearby hospital. The instructor refused initialMAILING transportADDRESS for treatment, a brief discussion ensued, and the young staffer eventually called 911.

While on the phone with Carriage line it includes carriage &B Mfgto . ...............................

M&F but Gauge .............................

28 a digital map pin to emergency Boxstaff 1916member was B 911, theP.O. young not able provide an exact18address instead offered to send with onboard log turners, carriage Columbia,Despite TN 38402-1916 personnel. his injuries, theB.instructor able to relay 16 the correct address young staff who, in turn, conveyed H. Paynewas ..............................

Meadows Mill, to Incthe . ................

33 member, drive, hyd pac for carriage, (888) 401-6367 it to the 911 dispatcher. The 911 dispatcher confirmed the city location and informed the staffer that they would transfer the call to a Baker ...................................... 5, 7 Menominee Saw ..................... 29 sawyers cab, computer controls, AD county SUBMISSIONS different dispatcher. The accident location was right on the county border, and the initial 911 call was routed to the improper May be sent to­ cabinetwith withthe electronic drivesand for Incmember . ..............tried 30 to argue county dispatch center. Instead of immediately accepting this transfer, theDetector's young staff dispatcher Bell's Machining .....................

27 Metal morris@lumbermens.co further explain the location of the Brute accident. carriage knees, husk including Force Mfg. ..................... 31 Midwest Sharpening.............. 26 POSTMASTER

Send address changes to: 'Stacker Dudes'....

Lumberman's Exchange (Continued page 24} P.O. from Box 1916 Columbia, TN 38402

** INFO LINK**

Buck Equipment (AIM) ........ 36 Corley Mfg .............................. 32 CRD Metalworks .................... 25

robustly engineered to provide reliable performance, optimize

The Lumberman's Exchange is CW Mill-ArmorHog .............. 17 throughput, andbyminimize manual labor. published monthly Woods Mill-Hogzilla ...................

15 Publishing, P.O. Box the 1916,flag ship M2LCW • AIT designed Board Stacker over 25 years Columbia, TN 38402. All rights ago Dyna Products ........................ 35 reserved. All editorial/ advertorial • AIT hasare designed I 000Hydraulics industrial ................... automation8 submissions used at theand built over Empire discretion of the and are mayboard stackers and high-speed saws solutions, 600publisher of which be edited for purposes of clarity Great Lakes Mfg. .................... 34 • AIT a all variety of patents on machine designs and and space.holds Although efforts have ...................... been made to ensure accuracy of automation processes, includingHahn theirMachinery Board Deduster, and3 content submitted by advertisers the ABSAMS® (Advanced Board Singulation and Metering Hurst Boiler .............................

14 and writers, the Lumberman's System).its principles and Exchange, Iron Bull ................................... 21 associates, are not held liable for errors or omissions. Reproduction, Kilgore Saw .............................

22 FULFILLING BRAND PROMISE AND VALUE in whole or part, is prohibited with­ in May 2024, MAX equipment feature the new Lignomat will .................................

24 out Starting written consent. ©2017 Woods Publishing logo along with a grey and red color scheme. Using the QR code

- USED FORESTRY EQUIPMENT FOR SALE

❘

48" bottom saw and 36" top saw Mor bark .....................................

9 and plant managers can connect on MAX's machines, operators Multitek 12 with the...................................

MAX service department

directly. The company

STACKING RAC

provides parts for MAX and Piper's Saw Shop ....................

13 AIT equipment, as well as onsite

and remote support for MAX, AIT, and other manufacturers' equipment.

Row Electric ............................

20 "Industrial automation improves work conditions, dramatically increases output,.................. and reduces Sawmill Exchange 11 employee turnover," said Sill.

'That's what we do."

Select Sawmill ......................... 19 AIT was founded in 1991 in central Virginia as an engineering Smith Sawmill 4 firm and soon........................... added a machine shop and in-house fabrication The Paul Bunyan 39 service machine design and build services.

Today, Show AIT is......... a full company, designing and developing all types of industrial Thomas Industrial Controls ..... 10 machines, from automated testing and assembly machines to Union Grove Saw & Knife.. 2, 37 food and pharmaceutical processing machines.

Universal Refiner ................... 23 For more information on MAX equipment, visit www.

MaxBoardFeet.com, email lsales@maxboardfeet.com www.BakerProducts.net or call WoodMizer ................................

800.S48.6914 I S73.663.7711 (434) 525-2292.

Rotochopper............................ 40

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

❘

 (888) 401-MENS L!

NO. 25

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer NOTCHER 2016 WOODMIZER LT-40HD (CHALLENGER MACHINE BUILT) 13428 Victory Ln. // PO Box 124 Item ID: 5632 Item ID: 2125 Adams Center, NY 13606

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

‘13 KMC 2500 Track Skidder Item ID:JD 14078 550G LT Contact: Austin Item ID: 3686 Ph: (888) 401-6367 x703

capacity!.Item ItemID: ID5559 13421. Sam x702

well built processor. Item ID 13820.

motor, Rotobec continuous

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 801-362-2170 off onto (C) a conveyor.

This is a very

Sam x702

B U Y S

Firewood Processor - This is

‘05 Gehl CTL 70

H O T

2018 WOODMIZER ‘83 John Deere LT-50 SUPER 4850 Item ID: 5519

Item ID: 14073 Contact: AUSTIN Contact: Austin Email: Austin@lumbermensco.com Ph: (888) 401-6367 x703 Phone: 888-401-6367 EXT 703 (C) 931-797-8029

with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco2020 SawsWOODMIZER - Two Brewco Saws

in excellent condition. Runs great.

LT-40 WIDE

Item ID 13644. x702 ItemSam ID: 5549

FIREWOOD PROCESSORS

Contact: AUSTIN

2010 Shop Built Wood Processor Email: Austin@lumbermensco.com 888-401-6367 EXT 703 - ItPhone: has a 353 Detroit diesel, 40 (C) 931-797-8029

inch insert tooth circle saw, 30 foot  Issue 364 437

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 2019 WOODMIZER LT-70

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes

2022 WOODMIZER LT-40 tach, oil pressure, water temp and

SUPER WIDE Item ID: 5641 chain conveyer, 8 way splitter, on

amp gauges.

Cuts logs up SUPER WIDE HDto 16”.

Item 5612 One owner andID: comes with all

Email: Austin@lumbermensco.com 13916.

Austin x703 Phone: 888-401-6367 EXT 703 Best Value Log Splitter (C)Portable 931-797-8029

Email: Austin@lumbermensco.com new for $32,500. Item ID 13865.

Phone: 888-401-6367 EXT 703 Sam x702(C) 931-797-8029

20,000lb goose neck trailer. Item ID Contact: AUSTIN

- Small manufacturer in PA has

made the best valued log splitter.

manuals receipts. Purchased Contact:and AUSTIN

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

12′ JD 550K LGP

homemadeItem processor with a 10’ ID: 3753 log deck. Has a hydraulic grapple, Contact: JOE

chain and kicker that all runs off Email: Joe@lumbermensco.com 888-401-6367 EXT 709 ofPhone: a 4 cylinder Mercedes power (C) 801-362-2170

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 -

CAT D6K2

3412 Caterpillar Diesel engine Item ID: 1488 with 850 HP. 5300 hrs. Mill in Contact: JOE

good condition.

Just finished 10 Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXTto 709 Acre clearing job, ready work!

(C) 801-362-2170

Remote control. Big production

 List  seLL  exchange  buy  save

TIMBERKING B20 SAWMIL

Contact: AUSTIN BARKO Email: Austin@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 703 (C) 931-797-8029 knuckleboom, 30' boom, 75hp

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing14′ head. works JDhead 650K LGPgreat.

Item ID: 3574 Item ID 13185.

Sam x702

1999 Barko Contact: JOE160D - new engine with Email: Joe@lumbermensco.com approximately 1500 hours. Hour Phone: 888-401-6367 EXT 709

meter dont work. The last 2 owners (C) 801-362-2170 have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuousLT-3000 grapple.

13′ WOODMIZER

Runs Great!. Item ID 13740. Sam x702

OPERATION

Item ID: 5007

BELL

Contact: AUSTIN

1990 Bell Super T - This Bell has Email: Austin@lumbermensco.com

EXT 703 aPhone: brand888-401-6367 new Duetz engine.

Lever (C) 931-797-8029

control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at Boonville, New York www.LumberMB\ISmagazine.com www.starwebhosting.net/woodsmen/

The Tree that Started 1996 TIMBERJACK 380C it All!

Item ID: 4825 Since 1986, Lumbermens has Contact: AUSTIN published a monthly circular Email: Austin@lumbermensco.com reaching sawmills, loggers, Phone: 888-401-6367 EXT 703 pallet makers, recyclers and (C) 931-797-8029 industrial woodworking plants worldwide.

LOGGING & HEAVY EQUIPMENT EXPO Contact: AUSTIN Thurs, 7 Sept - Sat, 9 Sept Email: Austin@lumbermensco.com

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Escanaba, Michigan Phone: 888-401-6367 EXT 703 (C) 931-797-8029

MID-ATLANTIC

LOGGING & BIOMASS EXPO

is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx FMC 210 Item ID: 5526

THE Contact: PAUL BUNYAN SHOW AUSTIN Fri,Email: 6 Oct Sun, 8 Oct Austin@lumbermensco.com Phone: 888-401-6367 Cambridge, Ohio EXT 703 (C) 931-797-8029 www.ohioforest.org

Item ID 13876. Austin x703 S & W 125 Band Mill with

98′ JOHN DEERE- Low 640Ehours Caterpillar generator Item ID: 2701 on the mill, electronic computer Set

Contact: AUSTIN works,1 1/2" or 2" band, 22ft. track Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 (C) 931-797-8029

hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

86′ TIMBERJACK 230A

Bell's Machining ..................... 27 Item ID: 3605 Brute Force Mfg. ..................... 31

1983 JOHN DEERE 640C30 Metal Detector's Inc. ..............

Item ID: 5582 Midwest Sharpening.............. 26

Email:Equipment Joe@lumbermensco.com Buck (AIM) ........ 36

Email: Austin@lumbermensco.com Mor bark ..................................... 9

Corley (C) Mfg .............................. 32 801-362-2170

Multitek(C) ...................................

12 931-797-8029

Columbia, TN 38402

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers TIMBERJACK 208 and writers, the Lumberman's Item ID: 5320 Exchange, its principles and associates, not held liable for Contact: are AUSTIN errors or Austin@lumbermensco.com omissions. Reproduction, Email: inPhone: whole or part, is prohibited with­ 888-401-6367 EXT 703 out written (C)consent.

931-797-8029 ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

JOHN DEERE......................

440C’S Hahn Machinery 3

The Paul Bunyan Show ......... 39

PACKAGE DEAL Hurst Boiler .............................

14 Item ID: 1966 Iron Bull ................................... 21

FRANKLIN 170 SKIDDER Thomas Industrial Controls ..... 10 Item ID: 3517 Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22 Email: Austin@lumbermensco.com

Universal Refiner ................... 23 Email: Joe@lumbermensco.com

Lignomat ................................. 24 (C) 931-797-8029

WoodMizer ................................ l (C) 801-362-2170

Contact:POSTMASTER AUSTIN Email: SendAustin@lumbermensco.com address changes to: Phone: 888-401-6367 EXT 703 Lumberman's Exchange (C) 931-797-8029 P.O. Box 1916

is supported on both sides. This

Contact: JOE

Phone: 888-401-6367 EXT 709

Contact: AUSTIN

Phone: 888-401-6367 EXT 703

- USED FORESTRY EQUIPMENT FOR SALE

❘

Contact: AUSTIN

Phone: 888-401-6367 EXT 703

Contact: JOE

Phone: 888-401-6367 EXT 709

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

L O G G I N G

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

(888) 401-6367 ext. 702 sam@lumbermens.co

it includes two sets of Mcdonough

in ve1y good condition, Cuts 130

Contact: AUSTIN Donna Heninger Email: Austin@lumbermensco.com Phone: 888-401-6367REPS EXT 703 EQUIPMENT (C) 931-797-8029 Sam Wall

AD SUBMISSIONS 98′May JOHN DEERE be sent to­640G Item ID: 2694 morris@lumbermens.co

that go up and down, with airbags,

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept CAT 225LC EXCAVATOR Item ID: 5419

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

Contact: AUSTIN bells and whistles, its a production Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 machine, with air strain conveyers (C) 931-797-8029

pressure guides. Top Casting wheel

John Williams (888) 401-6367 ext. 701 02′ JOHN DEERE 640G2 j@lumbermens.co Item ID: 4710

MAILING ADDRESS

90′ TIMBERJACK 240A

feed deck 20 foot out feed deck Item ID: 5082 with 44 inch wheels, and all the

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

MARKETING DIRECTOR

DESIGN DIRECTOR

10 hours on this machine since it has been rebuilt, it has a 24foot in

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com JOHN DEERE 540D INT'L CABLE SKIDDER 72ND ANNUAL GREAT LAKES Item ID: 5249 Item ID: 5568

PUBLISHER

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

with onboard log turners, carriage drive, hyd pac for carriage,

06′ JOHN DEERE 335

sawyers cab, computer controls,

LOGelectronic LOADERdrives for cabinet with Item ID: 5403 carriage knees, husk including

Contact: JOE 48" bottom saw and 36" top saw Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

STACKING RAC JOHN DEERE 440C Item ID: 5242

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net (C) 931-797-8029

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 27

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM “Precision Under Pressure”

‘16 Halverson H140 Skidsteer (DEMO) TIMBERJACK 208 Item ID: 5320

PRENTICE 210B Item ID: 5085

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘93 Barko 180B

Item ID: JW-909632 2022 TIGERCAT Contact: J Williams620H Item ID: 5334x701 Ph: (888) 401-6367

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703 TAJFUN EQUIPMENT Item ID: 5368

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘95 John Deere C6 Tree Farmer

L O G G I N G

‘13 KMC 2500 Track Skidder 13428 Victory 643JLn. // PO Box 124 BELL SUPER T CUTTER Adams Center, Item ID: 4907NY 13606 Item ID: 4952 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID: 14078 13′ BARKOAustin 595ML MAGNUM Contact: Item ID: 4974x703 Ph: (888) 401-6367

capacity!.Item ItemID: ID5358 13421. Sam x702

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 off onto a conveyor. This is a very (C) 931-797-8029

Contact: AUSTIN 1994 Barko 160B - Electric Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 knuckleboom, 30' boom, 75hp (C) 931-797-8029

Sam x702

grapple, 5,000 original hours.

well built processor. Item ID 13820.

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850 TIMBERJACK 1270

Item ID:Item 14073 ID: 5199 Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

TIGERCAT Item ID 04′ 13644.

Sam x702 620 Item 4705 FIREWOOD ID: PROCESSORS

Contact: AUSTIN 2010 Shop Built Wood Processor

Email: Austin@lumbermensco.com - ItPhone: has a 353 Detroit diesel, 40 888-401-6367 EXT 703 931-797-8029 inch insert(C) tooth circle saw, 30 foot

 Issue 364 437

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 2016 TAJFUN 400 JOY

chain conveyer, 8 way splitter, on Item ID: 5227 20,000lb goose neck trailer. Item ID Contact: AUSTIN

13916. x703 Email:Austin Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Best Value Portable Log Splitter (C) 931-797-8029

- Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and

LIEBHERR A312

amp gauges. Cuts logs up to 16”.

WITH RYANS HEAD

One owner and comes with all Item ID: 4979 manuals and receipts. Purchased Contact: AUSTIN

new forAustin@lumbermensco.com $32,500. Item ID 13865.

Email: Phone: 888-401-6367 EXT 703 Sam x702 (C) 931-797-8029

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

18′ JOHN DEERE 753J homemade processor with a 10’ Item ID: 4968 log deck. Has a hydraulic grapple, Contact: AUSTINthat all runs off chain and kicker

Email: Austin@lumbermensco.com ofPhone: a 4 cylinder Mercedes 888-401-6367 EXTpower 703 931-797-8029 unit. Has(C) a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 -

CAT D5H TSK 3412 Caterpillar Diesel engine Item ID: 4939 with 850 HP. 5300 hrs. Mill in

Contact: AUSTINJust finished 10 good condition.

Email: Austin@lumbermensco.com Acre clearing job, ready work!

Phone: 888-401-6367 EXTto 703 (C) 931-797-8029 Remote control.

Big production

 List  seLL  exchange  buy  save

TIMBERJACK 1010

BARKO

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

CAT 538

Item ID 13185. Sam x702 Item ID: 5302 1999 Barko 160D - new engine with Contact: AUSTIN

approximately 1500 hours. Hour Email: Austin@lumbermensco.com

Phone:dont 888-401-6367 EXT 703 meter work. The last 2 owners (C) 931-797-8029

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702 TIMBCO 445EXL Item ID: 5293 BELL

Contact: 1990 BellAUSTIN Super T - This Bell has

Email: Austin@lumbermensco.com

aPhone: brand888-401-6367 new Duetz engine.

EXT 703Lever

931-797-8029 control,(C) 33” bar, pump and tranny

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at Boonville, New York www.LumberMB\ISmagazine.com www.starwebhosting.net/woodsmen/

The Tree

TIMBERJACK 380C that Started

GRAPPLE SKIDDER it All! Item ID: 863

Since 1986, Lumbermens has Contact: SAM published a monthly circular Email: Sam@lumbermensco.com reaching sawmills, loggers, Phone: 888-401-6367 EXT 702 pallet makers, recyclers and (C) 615-596-4148 industrial woodworking plants worldwide.

LOGGING & HEAVY EQUIPMENT EXPO

it includes two sets of Mcdonough

MID-ATLANTIC

LOGGING & BIOMASS EXPO

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

Contact: MOSE Phone: 208-290-1888

Contact:POSTMASTER JOE Email: SendJoe@lumbermensco.com address changes to: Phone: 888-401-6367 EXT 709 Lumberman's Exchange (C) 801-362-2170 P.O. Box 1916

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

’92 TIMBERJACK 450C THE PAUL BUNYAN SHOW Item ID: 1369 Fri, 6 Oct - Sun, 8 Oct Contact: ROBERT Cambridge, Ohio Phone: 606-875-4783 www.ohioforest.org

Item ID 13876. Austin x703 S & W 125 Band Mill with

TIMBCO 425D Caterpillar generator - Low hours Item ID: 1429 on the mill, electronic computer Set

Contact: AUSTIN works,1 1/2" or 2" band, 22ft. track Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 (C) 931-797-8029

hours ready to run. Item ID 13434.

Sam x702

** INFO LINK** B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

JOHN Saw DEERE 550G 29 Menominee .....................

1979 TIMBERJACK 230

Bell's Machining ..................... 27

CABLE SKIDDER Brute Force Mfg. ..................... 31 Item ID: 1072

Phone: 807-631-4081 Corley Mfg .............................. 32

Contact: KYLE

Columbia, TN 38402

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is JD 700J LGP published06′ monthly

by Woods Publishing, Item P.O. Box ID: 1916, 3787 Columbia, TN 38402. All rights Enclosed cab, Winch strong, reserved.

All editorial/ advertorial New sprockets gothewith it, submissions are used at Undercarriage 55%, and Has may no discretion of the publisher mechanical issues, ofbeen taken be edited for purposes clarity of, Although The owner done have with andcare space. allisefforts a project bought it for, Have been made toheensure accuracy of a reliable truckerby available.

Buyer content submitted advertisers pays for trucking, About 80mi and writers, the Lumberman's south of Louisville, KY Exchange, its principles and associates, are not held liable for Contact: JOE errors or Joe@lumbermensco.com omissions. Reproduction, Email: inPhone: whole or part, is prohibited with­ 888-401-6367 EXT 709 out written (C)consent.

801-362-2170 ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

14′Boiler JOHN.............................

DEERE 748H 14 Hurst Item ID: 2707 Iron Bull ................................... 21

JOHN DEERE 648D..... 10 Thomas Industrial Controls Item ID: 547 Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22 Email: Austin@lumbermensco.com

Universal Refiner ................... 23 Email: Sam@lumbermensco.com

Lignomat ................................. 24 (C) 931-797-8029

WoodMizer ................................ l (C) 615-596-4148

Buck Equipment (AIM) ........ 36

Contact: AUSTIN

Phone: 888-401-6367 EXT 703

- USED FORESTRY EQUIPMENT FOR SALE

❘

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal

Carriage line it includes carriage

with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls,

CRAWLERInc DOZER Metal Detector's . .............. 30 Item ID: 5388 Midwest Sharpening.............. 26 Contact: JOE Email: Joe@lumbermensco.com Mor bark ..................................... 9 Phone: 888-401-6367 EXT 709 Multitek(C) ...................................

12 801-362-2170

cabinet with electronic drives for carriage knees, husk including 460 TIMBERJACK Item ID:and 1124 48" bottom saw 36" top saw Contact: MARCUS Phone: 660-833-9061

STACKING RAC TIGERCAT 822 Item ID: 1130

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net (C) 931-797-8029

Contact: SAM

Phone: 888-401-6367 EXT 702

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

L O G G I N G

EXCAVATOR 225 LC Item ID: 1067

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

AD SUBMISSIONS 16′ 700K May beJD sent to­ Item ID: 4343 morris@lumbermens.co

that go up and down, with airbags,

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

LOG LOADER

(888) 401-6367 ext. 702 sam@lumbermens.co

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

PROCESSOR

feed deck 20 foot out feed deck Item ID: 2593 with 44 inch wheels, and all the

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

(888) 401-6367 ext. 701 KNUCKLEBOOM LOADER j@lumbermens.co Item ID: 978 DESIGN DIRECTOR

MAILING ADDRESS

2016 HYPRO 755HB

Contact: AUSTIN bells and whistles, its a production Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 machine, with air strain conveyers (C) 931-797-8029

MARKETING DIRECTOR PRENTICE 384 John Williams

Contact: AUSTIN Donna Heninger Email: Austin@lumbermensco.com Phone: 888-401-6367REPS EXT 703 EQUIPMENT (C) 931-797-8029 Sam Wall

10 hours on this machine since it has been rebuilt, it has a 24foot in

Contact: AUSTIN Contact: AUSTIN 7 Sept - Sat, 9 Sept Email: Austin@lumbermensco.comThurs, Email: Austin@lumbermensco.com Escanaba, Michigan Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 (C) 931-797-8029 (C) 931-797-8029

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com 2009 JOHN DEERE 548G3 725B TIMBERPRO 72ND ANNUAL GREAT LAKES Item ID: 4699 Item ID: 1398

PUBLISHER

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 29

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM “Precision Under Pressure”

TIMBER JACK 450B 04′ JD 450H Item ID: 4327 Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

GRAPPLE SKIDDER Item ID: 5452 Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

‘16 Halverson H140 Skidsteer (DEMO)

‘93 Barko 180B

Item ID: JW-909632 12′ JD 648H Contact: J Williams Item ID: 5253x701 Ph: (888) 401-6367

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703 02′ CASE 650H Item ID: 3511

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

‘95 John Deere C6 Tree Farmer

L O G G I N G

‘13 KMC 2500 Track Skidder 13428 98′ Victory Ln. // PO Box 124 TJ 460 Adams Center, Item ID: 4918NY 13606 Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

JOHN DEERE 848L Item ID: 1184

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID: 14078 15′ TIGERCAT Contact: Austin 610E Item ID: 4944x703 Ph: (888) 401-6367

capacity!.Item ItemID: ID1531 13421. Sam x702

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 off onto a conveyor. This is a very (C) 931-797-8029

Contact: AUSTIN 1994 160B - Electric Email:Barko Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 knuckleboom, 30' boom, 75hp (C) 931-797-8029

Sam x702

grapple, 5,000 original hours.

well built processor. Item ID 13820.

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 03′ JOHN DEERE 4850648G III SKIDDER

Item ID:Item 14073 ID: 5647 Contact: Austin Contact: JOE Ph: (888) 401-6367 x703 Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

90′Sam JD 550G Item ID 13644. x702 Item ID: 3873 FIREWOOD PROCESSORS

Contact: JOE Wood Processor 2010 Shop Built

Email: Joe@lumbermensco.com - ItPhone: has a 353 Detroit diesel, 40 888-401-6367 EXT 709 801-362-2170 inch insert(C) tooth circle saw, 30 foot

 Issue 364 437

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 TJ 450B

chain conveyer, 8 way splitter, on Item ID: 5098 20,000lb goose neck trailer. Item ID Contact: JOE

13916.

Austin x703 Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 Best Value Portable Log Splitter (C) 801-362-2170

- Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

14′ TIGERCAT 720E

One owner and comes with all Item ID: 1617 manuals and receipts. Purchased Contact: AUSTIN

new forAustin@lumbermensco.com $32,500. Item ID 13865.

Email: Phone: 888-401-6367 EXT 703 Sam x702 (C) 931-797-8029

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

JD 648Lwith a 10’ homemade processor Item ID: 5073 log deck. Has a hydraulic grapple, Contact: JOE chain and kicker that all runs off

Email: Joe@lumbermensco.com ofPhone: a 4 cylinder Mercedes 888-401-6367 EXTpower 709 801-362-2170 unit. Has(C) a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

’95 JOHN DEERE 2004 Bandit Beast Model 4680 548G II SKIDDER 3412 Caterpillar Diesel engine Item ID: 5605 with 850 HP. 5300 hrs.

Mill in

Contact: JOE good condition.

Just finished 10

Email: Joe@lumbermensco.com Acre clearing job, ready work!

Phone: 888-401-6367 EXTto 709 801-362-2170 Remote (C) control.

Big production

 List  seLL  exchange  buy  save

JOHN DEERE 643K

BARKO

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

92′ CAT D5H

Item ID 13185. Sam x702 Item ID: 4678 1999 Barko 160D - new engine with Contact: JOE

approximately 1500 hours. Hour Email: Joe@lumbermensco.com

Phone:dont 888-401-6367 EXT 709 meter work. The last 2 owners (C) 801-362-2170

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702 JOHN DEERE 753J Item ID: 1582 BELL

Contact: 1990 BellAUSTIN Super T - This Bell has Email: Austin@lumbermensco.com a brand new Duetz engine.

Phone: 888-401-6367 EXT 703Lever 931-797-8029 control,(C) 33” bar, pump and tranny

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at Boonville, New York www.LumberMB\ISmagazine.com www.starwebhosting.net/woodsmen/

The Tree that Started 98′itCAT All! 515

Item ID: 4671 Since 1986, Lumbermens has Contact: JOE published a monthly circular Email: Joe@lumbermensco.com reaching sawmills, loggers, Phone: 888-401-6367 EXT 709 pallet makers, recyclers and (C) 801-362-2170 industrial woodworking plants worldwide.

LOGGING & HEAVY EQUIPMENT EXPO

Contact: JOE Contact: AUSTIN Thurs, 7 Sept - Sat, 9 Sept Email: Joe@lumbermensco.com Email: Austin@lumbermensco.com Escanaba, Michigan Phone: 888-401-6367 EXT 709 Phone: 888-401-6367 EXT 703 (C) 801-362-2170 (C) 931-797-8029

MID-ATLANTIC

LOGGING & BIOMASS EXPO

is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx 04′ TIMBERJACK 460D Item ID: 2724

Item ID 13876. Austin x703 S & W 125 Band Mill with

98′ JOHN DEERE 648hours Caterpillar generator - Low Item ID: 2798 on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Contact: AUSTIN Fri,Email: 6 Oct - Sun, 8 Oct Austin@lumbermensco.com

Contact: AUSTIN works,1 1/2" or 2" band, 22ft. track Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 (C) 931-797-8029

Phone: 888-401-6367 Cambridge, Ohio EXT 703 (C) 931-797-8029 www.ohioforest.org

hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

Bell's Machining ..................... 27 Item ID: 2646 Brute Force Mfg. ..................... 31

04′Detector's JOHN DEERE 648G330 Metal Inc. ..............

Item ID: 2791 Midwest Sharpening.............. 26

Email:Equipment Austin@lumbermensco.com Buck (AIM) ........ 36

Email: Austin@lumbermensco.com Mor bark ..................................... 9

Corley (C) Mfg .............................. 32 931-797-8029

Multitek(C) ...................................

12 931-797-8029

Columbia, TN 38402

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers 99′ FRANKLIN 170 and writers, the Lumberman's Item ID: 4586 Exchange, its principles and associates, Contact: are JOEnot held liable for errors or Joe@lumbermensco.com omissions. Reproduction, Email: inPhone: whole or part, is prohibited with­ 888-401-6367 EXT 709 out written (C)consent.

801-362-2170 ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

15′ CAT 525D Hurst Boiler .............................

14 Item ID: 3172 Iron Bull ................................... 21

CLARK F666Controls RANGER Thomas Industrial ..... 10 Item ID: 3233 Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22 Email: Joe@lumbermensco.com

Universal Refiner ................... 23 Email: Joe@lumbermensco.com

Lignomat ................................. 24 (C) 801-362-2170

WoodMizer ................................ l (C) 801-362-2170

Contact:POSTMASTER JOE Email: SendJoe@lumbermensco.com address changes to: Phone: 888-401-6367 EXT 709 Lumberman's Exchange (C) 801-362-2170 P.O. Box 1916

is supported on both sides. This

2013 JOHN DEERE 848H

Contact: AUSTIN

Phone: 888-401-6367 EXT 703

Contact: JOE

Phone: 888-401-6367 EXT 709

- USED FORESTRY EQUIPMENT FOR SALE

❘

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal

Carriage line it includes carriage

with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls,

02′ electronic TJ 660D drives for cabinet with Item ID: 4088 carriage knees, husk including

Contact: AUSTIN

Contact: JOE 48" bottom saw and 36" top saw Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Phone: 888-401-6367 EXT 703

STACKING RAC 12′ TIGERCAT 620D Item ID: 2753

Contact: JOE

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net (C) 931-797-8029

Phone: 888-401-6367 EXT 709

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

L O G G I N G

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

(888) 401-6367 ext. 702 sam@lumbermens.co

it includes two sets of Mcdonough

in ve1y good condition, Cuts 130

Contact: JOE Donna Heninger Email: Joe@lumbermensco.com Phone: 888-401-6367REPS EXT 709 EQUIPMENT (C) 801-362-2170 Sam Wall

AD SUBMISSIONS 02′be CAT 525B May sent to­ Item ID: 3214 morris@lumbermens.co

that go up and down, with airbags,

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept 06′ TIGERCAT 635C Item ID: 3322

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

Contact: JOE bells and whistles, its a production Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 machine, with air strain conveyers (C) 801-362-2170

pressure guides. Top Casting wheel

John Williams (888) 401-6367 ext. 701 TJ 460D j@lumbermens.co Item ID: 3286

MAILING ADDRESS

00′ JD 748G III

feed deck 20 foot out feed deck Item ID: 3210 with 44 inch wheels, and all the

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

MARKETING DIRECTOR

DESIGN DIRECTOR

10 hours on this machine since it has been rebuilt, it has a 24foot in

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com 2004 JOHN DEERE 648G3 13′ JD 648H 72ND ANNUAL GREAT LAKES Item ID: 2628 Item ID: 3589

PUBLISHER

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 31

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM “Precision Under Pressure”

‘16 Halverson H140 Skidsteer (DEMO) 83′ TJ 380A Item ID: 2133 Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

13′ CAT 545C Item ID: 2117 Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

‘93 Barko 180B

Item ID: JW-909632 08′ JDJ 535 SERIES II Contact: Williams Item ID: 4580x701 Ph: (888) 401-6367

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703 10′ JOHN DEERE 648H Item ID: 1847

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘95 John Deere C6 Tree Farmer

L O G G I N G

‘13 KMC 2500 Track Skidder 13428 Victory Ln. // PO Box 124 CAT 515 Adams Center, Item ID: 1739NY 13606 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

04′ JD 435 II Item ID: 4169

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 CAT 515 x703 Item ID: 1509

‘83 John Deere 4850

15′ CAT 559C LOADER Item ID: 14073 Item ID: 5534 Contact: Austin Contact: JOE Ph: (888) 401-6367 x703

Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 801-362-2170 with 1700(C) hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

TIMBERJACK 240A in excellent condition. Runs great.

Item IDGRAPPLE 13644. SamSKIDDER x702 Item ID: 1769 FIREWOOD PROCESSORS

Contact: AUSTIN 2010 Shop Built Wood Processor

Email: Austin@lumbermensco.com - ItPhone: has a 353 Detroit diesel, 40 888-401-6367 EXT 703 931-797-8029 inch insert(C) tooth circle saw, 30 foot

 Issue 364 437

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 17′ JD 437E chain conveyer, 8 way splitter, on Itemneck ID: 4809 20,000lb goose trailer. Item ID Contact: JOE x703 13916.

Austin

Email: Joe@lumbermensco.com Best Value Portable Log Splitter Phone: 888-401-6367 EXT 709 (C) 801-362-2170 - Small manufacturer in PA has

made the best valued log splitter.

Sam x702

grapple, 5,000 original hours.

Contact: ERVIN

well built processor. Item ID 13820.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

TIMBERJACK 460

One owner and comes with all Item ID: 1777 manuals and receipts. Purchased Contact: AUSTIN

new forAustin@lumbermensco.com $32,500. Item ID 13865.

Email: Phone: 888-401-6367 EXT 703 Sam x702 (C) 931-797-8029

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

TIGERCAT homemade processor630E with a 10’ Item ID: 1098 log deck. Has a hydraulic grapple, Contact: AUSTINthat all runs off chain and kicker

Email: Austin@lumbermensco.com ofPhone: a 4 cylinder Mercedes 888-401-6367 EXTpower 703 931-797-8029 unit. Has(C) a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

BARKO

off onto (641) a conveyor.

This is a very Phone: 229-1012

Handles logs up to 32”. Uses

13HP Honda motor. Manual start

04′ TIMBERJACK 460D

capacity!.Item ItemID: ID5445 13421. Sam x702 Contact: JOE 1994 Barko 160B - Electric Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 knuckleboom, 30' boom, 75hp (C) 801-362-2170

Firewood Processor - This is

‘05 Gehl CTL 70

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 -

13′ TIGERCAT 234 3412 Caterpillar Diesel engine Item ID: 4803 with 850 HP. 5300 hrs. Mill in

Contact: JOE good condition.

Just finished 10

Email: Joe@lumbermensco.com Acre clearing job, ready work!

Phone: 888-401-6367 EXTto 709 801-362-2170 Remote (C) control.

Big production

 List  seLL  exchange  buy  save

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

00′ TIGERCAT 245

Item ID 13185. Sam x702 Item ID: 4685 1999 Barko 160D - new engine with Contact: JOE

approximately 1500 hours. Hour Email: Joe@lumbermensco.com

Phone:dont 888-401-6367 EXT 709 meter work. The last 2 owners (C) 801-362-2170

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702 95′ PRENTICE 210E Item ID: 3628 BELL

Contact: 1990 BellJOE Super T - This Bell has Email: Joe@lumbermensco.com

aPhone: brand888-401-6367 new Duetz engine.

EXT 709Lever

801-362-2170 control,(C) 33” bar, pump and tranny

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at Boonville, New York www.LumberMB\ISmagazine.com www.starwebhosting.net/woodsmen/

The Tree that Started 98′ PRENTICE it All! 280

Item ID: 2166 Since 1986, Lumbermens has Contact: JOE published a monthly circular Email: Joe@lumbermensco.com reaching sawmills, loggers, Phone: 888-401-6367 EXT 709 pallet makers, recyclers and (C) 801-362-2170 industrial woodworking plants worldwide.

JOHN DEERE 1010D LOGGING & HEAVY EQUIPMENT EXPO Contact: JOE Item ID: 1715 Thurs, 7 Sept - Sat, 9 Sept

MARKETING DIRECTOR

DESIGN DIRECTOR

Contact: AUSTIN Donna Heninger Email: Austin@lumbermensco.com Phone: 888-401-6367REPS EXT 703 EQUIPMENT (C) 931-797-8029 Sam Wall

MID-ATLANTIC

LOGGING & BIOMASS EXPO

AD SUBMISSIONS 2014 PONSSE SCORPION May be sent to­ KING Item ID: 4914 morris@lumbermens.co

that go up and down, with airbags, it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

S & W 125 Band Mill with

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN works,1 1/2" or 2" band, 22ft. track Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 (C) 931-797-8029

Item ID 13876. Austin x703

08′ TIMBCO 415EX Caterpillar generator - Low hours Item ID: 1661 on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Contact: JOE Fri,Email: 6 Oct - Sun, 8 Oct Joe@lumbermensco.com Phone: 888-401-6367 Cambridge, Ohio EXT 709 (C) 801-362-2170 www.ohioforest.org

hours ready to run. Item ID 13434.

Sam x702

** INFO LINK** B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

Bell's Machining ..................... 27 Item ID: 1480 Brute Force Mfg. ..................... 31

14′Detector's JOHN DEERE 437D 30 Metal Inc. ..............

Item ID: 2740 Midwest Sharpening.............. 26

Email:Equipment Austin@lumbermensco.com Buck (AIM) ........ 36

Email: Austin@lumbermensco.com Mor bark ..................................... 9

Corley (C) Mfg .............................. 32 931-797-8029

Multitek(C) ...................................

12 931-797-8029

Columbia, TN 38402

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers VALMET 840.2 FORWARDER and writers, the Lumberman's ID: 741 Exchange, itsItem principles and associates, are not held liable for Contact: AUSTIN errors or Austin@lumbermensco.com omissions. Reproduction, Email: inPhone: whole or part, is prohibited with­ 888-401-6367 EXT 703 out written (C)consent.

931-797-8029 ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

MORBARK 6036 CHIPPER14 Hurst Boiler .............................

Item ID: 1084 Iron Bull ................................... 21

JOHN DEERE 1270..... 10 Thomas Industrial Controls Item ID: 1350 Union Grove Saw & Knife.. 2, 37

Contact:POSTMASTER AUSTIN Email: SendAustin@lumbermensco.com address changes to: Phone: 888-401-6367 EXT 703 Lumberman's Exchange (C) 931-797-8029 P.O. Box 1916

Contact: AUSTIN bells and whistles, its a production Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 machine, with air strain conveyers (C) 931-797-8029

Lexington, Kentucky 2004 PONSSE ERGO http://www.kfia.org/ KOBELCO 250 LOG LOADER KentuckyWoodExpo.aspx HARVESTER Item ID: 2584 Item ID: 2656

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

2004 PRENTICE 384

feed deck 20 foot out feed deck Item ID: 2637 with 44 inch wheels, and all the

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

(888) 401-6367 ext. 702 sam@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

VALMET 644

Contact: AUSTIN

Phone: 888-401-6367 EXT 703

Contact: SAM Kilgore Saw ............................. 22 Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 Lignomat ................................. 24 (C) 615-596-4148

- USED FORESTRY EQUIPMENT FOR SALE

❘

Contact: AUSTIN

Phone: 888-401-6367 EXT 703

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

with onboard log turners, carriage drive, hyd pac for carriage,

MORBARK MODEL 20

sawyers cab, computer controls,

CHIPHARVESTER cabinet with electronic drives for Item ID: 1246 carriage knees, husk including

Contact: SAM 48" bottom saw and 36" top saw Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 (C) 615-596-4148

STACKING RAC JOHN DEERE 85D Item ID: 1035

Contact: AUSTIN Universal Refiner ................... 23 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 WoodMizer ................................ l (C) 931-797-8029

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

L O G G I N G

John Williams (888) 401-6367 ext. 701 VALMET 840.4 j@lumbermens.co Item ID: 1222

Email: Joe@lumbermensco.com Escanaba, Michigan Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: JAKE Phone: (440) 537-5124

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com 08 ROTTNE H14 72ND ANNUAL GREAT LAKES Item ID: 2062

PUBLISHER

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

Contact: RON www.BakerProducts.net Phone: (606) 595-1734

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 33

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM “Precision Under Pressure”

ROTOSAW CUTTER Item ID: 3144

Item ID: JW-909632 JD 843J Contact:08′ J Williams Item ID: 2109x701 Ph: (888) 401-6367

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

84′ CAT 518

L O G G I N G

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703 05′ HYDRO-AX 721E Item ID: 3644

12′ JD 643K Item ID: 4896 Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

‘16 Halverson H140 Skidsteer (DEMO)

‘95 John Deere C6 Tree Farmer

13428 Victory Ln.724 // PO 15′ TIGERCAT G Box 124 Adams Center, Item ID: 3392NY 13606 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

15′ CAT 553C FELLER BUNCHER Item ID: 5495

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Item ID: 14078 17′ JOHN DEERE 843L Contact: Austin Item ID: 2731x703 Ph: (888) 401-6367

capacity!.Item ItemID: ID2046 13421. Sam x702

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 off onto a conveyor. This is a very (C) 931-797-8029

Contact: JOE 1994 Barko 160B - Electric Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 knuckleboom, 30' boom, 75hp (C) 801-362-2170

Sam x702

grapple, 5,000 original hours.

well built processor. Item ID 13820.

Firewood Processor - This is

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

‘83 John Deere 4850

chain conveyer, 8 way splitter, on

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter

with 1700 hours, in very good

- Small manufacturer in PA has

condition. Easily produces high

made the best valued log splitter.

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

‘13 KMC 2500 Track Skidder

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

07′ TIMBCO 445EXL

BARKO

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dontLIST work.

The last 2 owners SELL EXCHANGE BUY SAVE 1986 have only used EST it to load trucks or

as a backup as needed. Has a CTR

Visit our NEW Merchandise Store

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

but electronic option is available.

50% or better. 475 hp Cummins

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702

in excellent condition. Runs great.

Firewood Processor - This is a

Item ID 13644. Sam x702

homemade processor with a 10’

FIREWOOD PROCESSORS

log deck. Has a hydraulic grapple,

2010 Shop Built Wood Processor

chain and kicker that all runs off

inch insert tooth circle saw, 30 foot  Issue 364 437

1999 Bandit 1900 Tracked Disc

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

Brewco Saws - Two Brewco Saws

- It has a 353 Detroit diesel, 40

Handles logs up to 32”. Uses

of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

a brand new Duetz engine. Lever

www.lumbermenco.com

Lumbermens™  since 1986

❘

BELL

good condition. Just finished 10

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at Boonville, New York www.LumberMB\ISmagazine.com www.starwebhosting.net/woodsmen/

The Tree that Started 09′ WOODMIZER LT 300 it All!

Item ID: 4549 Since 1986, Lumbermens has Contact: JOE published a monthly circular Email: Joe@lumbermensco.com reaching sawmills, loggers, Phone: 888-401-6367 EXT 709 pallet makers, recyclers and (C) 801-362-2170 industrial woodworking plants worldwide.

SAWMILL

feed deck 20 foot out feed deck Item ID: 5559 with 44 inch wheels, and all the

Contact: AUSTIN bells and whistles, its a production Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 machine, with air strain conveyers (C) 931-797-8029

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

it includes two sets of Mcdonough

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

2017 TIMBERKING 2200 Item ID: 5513

Contact: JOE Donna Heninger Email: Joe@lumbermensco.com Phone: 888-401-6367REPS EXT 709 EQUIPMENT (C) 801-362-2170 Sam Wall

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx CORNELL SIZER Item ID: 1322

Item ID 13876. Austin x703 S & W 125 Band Mill with

2007 TIMBERKING B20hours Caterpillar generator - Low Item ID: 5540 on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Contact: SAM Fri,Email: 6 Oct - Sun, 8 Oct Sam@lumbermensco.com

Contact: AUSTIN works,1 1/2" or 2" band, 22ft. track Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 (C) 931-797-8029

Phone: 888-401-6367 Cambridge, Ohio EXT 702 (C) 615-596-4148 www.ohioforest.org

hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls,

Bell's Machining ..................... 27 Item ID: 2419 Brute Force Mfg. ..................... 31

2019 TIMBERKING 200030 Metal Detector's Inc. ..............

Item ID: 5508 Midwest Sharpening.............. 26

Email:Equipment Joe@lumbermensco.com Buck (AIM) ........ 36

Email: Austin@lumbermensco.com Mor bark ..................................... 9

Corley (C) Mfg .............................. 32 801-362-2170

Multitek(C) ...................................

12 931-797-8029

Columbia, TN 38402

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

FAST RUNShow AROUND TheGO Paul Bunyan ......... 39

2006 WOODMIZER LT-40

Hurst Boiler ............................. 14 Iron Bull ................................... 21

SYSTEM Thomas Industrial Controls..... 10 Item ID: 1200 Union Grove Saw & Knife.. 2, 37

SUPER HD PORTABLE SAWMILL Item ID: 5425

Kilgore Saw ............................. 22

Universal Refiner ................... 23 Email: Austin@lumbermensco.com

Contact:POSTMASTER JOE Email: SendJoe@lumbermensco.com address changes to: Phone: 888-401-6367 EXT 709 Lumberman's Exchange (C) 801-362-2170 P.O. Box 1916

LT40 WOODMIZER

Contact: JOE

Phone: 888-401-6367 EXT 709

Buying?

Selling?

lumbermensco.comLignomat • 888.401.6367 ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE

❘

Contact: AUSTIN

Phone: 888-401-6367 EXT 703

HURDLE SAWMILL cabinet with electronic drives for Item ID: 4949 carriage knees, husk including

Contact: AUSTIN 48" bottom saw and 36" top saw Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

STACKING RAC

Contact: AUSTIN

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net (C) 931-797-8029

Phone: 888-401-6367 EXT 703

WoodMizer ................................ l (C) 931-797-8029

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

S A W M I L L

(888) 401-6367 ext. 701 DEBARKER j@lumbermens.co Item ID: 3329

(888) 401-6367 ext. 702 sam@lumbermens.co

that go up and down, with airbags,

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

MARKETING DIRECTOR EARLY 90’S MELLOTT John Williams

19′ MORGAN MILITARY AD SUBMISSIONS NOTCHING BAND May be sent to­SAW Item ID: 3567 morris@lumbermens.co

TIMBERKING B20

LOGGING & HEAVY EQUIPMENT EXPO

ADVERTISING SALES

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

10 hours on this machine since it has been rebuilt, it has a 24foot in

Contact: AUSTIN Contact: AUSTIN 7 Sept - Sat, 9 Sept Email: Austin@lumbermensco.comThurs, Email: Austin@lumbermensco.com Escanaba, Michigan Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 (C) 931-797-8029 (C) 931-797-8029

Woods Publishing

MAILING ADDRESS

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com FENCE POST PROCESSING 2014 BAKER 13′ SAWMILL 72ND ANNUAL GREAT LAKES Item ID: 1231 Item ID: 4910

PUBLISHER

DESIGN DIRECTOR

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 35

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM “Precision Under Pressure”

‘16 Halverson H140 Skidsteer (DEMO)

FULL OPERATION Item ID: 5274

17′ COOKS AC36 SAWMILL Item ID: 5019

Item ID: JW-909632 TAJFUNJ Williams 480 PLUS JOY Contact: Item ID: 568x701 Ph: (888) 401-6367

Item ID: 14077 Contact: Austin 6HEAD Ph:EDMISTON (888) 401-6367 x703 BLOCK SAW Item ID: 5342

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

S A W M I L L S

BAKER DOMINATOR

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder

2019 WOODMIZER LT-70 13428 VictoryWIDE Ln. // PO Box 124 2017 HURDLE SAWMILL SUPER Adams Center, Item ID: 5191NY 13606 Item ID: 5025 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘05 Gehl CTL 70

‘83 John Deere 485001′ MACK RD688

Item ID:Item 14073 ID: 4479 Contact: Austin Contact: JOE Ph: (888) 401-6367 x703 Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

NYLE FIREWOOD Item ID 13644.

Sam x702DRY KILN Item ID: 3588

FIREWOOD PROCESSORS

Contact: AUSTIN 2010 Shop Built Wood Processor

Email: Austin@lumbermensco.com - ItPhone: has a 353 Detroit diesel, 40 888-401-6367 EXT 703 931-797-8029 inch insert(C) tooth circle saw, 30 foot

 Issue 364 437

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 MACK TRUCK WITH HOOD LOADER

chain conveyer, 8 way splitter, on Item ID: 1089 20,000lb goose neck trailer. Item ID Contact: SAM

13916. x703 Email:Austin Sam@lumbermensco.com Phone: 888-401-6367 EXTSplitter 702 Best Value Portable Log (C) 615-596-4148

- Small manufacturer in PA has

made the best valued log splitter.

capacity!.Item ItemID: ID5013 13421. Sam x702

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 off onto a conveyor. This is a very (C) 931-797-8029

Contact: AUSTIN 1994 Barko 160B - Electric Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 knuckleboom, 30' boom, 75hp (C) 931-797-8029

Sam x702

grapple, 5,000 original hours.

well built processor. Item ID 13820.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

WINCH FOR SALE

One owner and comes with all Item ID: 5413 manuals and receipts. Purchased Contact: AUSTIN

new forAustin@lumbermensco.com $32,500. Item ID 13865.

Email: Phone: 888-401-6367 EXT 703 Sam x702 (C) 931-797-8029

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

WARRATAH FS20a 10’ homemade processor with Item ID: 2100 log deck. Has a hydraulic grapple, Contact: JOE chain and kicker that all runs off

Email: Joe@lumbermensco.com ofPhone: a 4 cylinder Mercedes 888-401-6367 EXTpower 709 801-362-2170 unit. Has(C) a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Item ID: 14078 PRECISION 742H DEBARKER Contact: Austin Item ID: 5350x703 Ph: (888) 401-6367

Firewood Processor - This is

M I S C E L L A N E O U S

‘93 Barko 180B

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

INTERNATIONAL 2004 98′ Bandit Beast Model 4680 LOG TRUCK 3412 Caterpillar Diesel engine Item ID: 5057 with 850 HP. 5300 hrs.

Mill in

Contact: AUSTINJust finished 10 good condition.

Email: Austin@lumbermensco.com Acre clearing job, ready work!

Phone: 888-401-6367 EXTto 703 931-797-8029 Remote (C) control.

Big production

 List  seLL  exchange  buy  save

16′ COOKS AE4P EDGER

BARKO

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in

GREAT LAKES LOG TRAILER

kohing head. head works great.

SERCO 7000

Item ID 13185. Sam x702 Item ID: 1946 1999 Barko 160D - new engine with Contact: AUSTIN

approximately 1500 hours. Hour Email: Austin@lumbermensco.com

Phone:dont 888-401-6367 EXT 703 meter work. The last 2 owners (C) 931-797-8029

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

LOG MAX 7000 Item ID: 1051 BELL

Contact: 1990 BellAUSTIN Super T - This Bell has

Email: Austin@lumbermensco.com

aPhone: brand888-401-6367 new Duetz engine.

EXT 703Lever

931-797-8029 control,(C) 33” bar, pump and tranny

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 37

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

AD DIRECTORY

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 437

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

Air Systems Mfg. ...........................21 ............................... 828-757-3500 Anson ...............................................19 ............................... 800-663-7723 B & B Mfg. ......................................13 ............................... 716-373-5881 B. H. Payne .....................................21 ............................... 800-752-0627 ‘93 Barko 180B Boulware Equipment, LLC ...........9 .................................. 704-651-6061 ‘16 Halverson H140 Item ID: 14077 Brute Force Firewood Equip.....10 ...............................

715-678-0037 Contact: Austin Skidsteer Buck Equipment (DEMO) (AIM) .................24 ...............................

800-803-3365 Ph: (888) 401-6367 x703 Item ID:Forestry JW-909632 Built-Rite Equip. LLC ....11 ............................... 800-757-2520 Contact: J Williams Cord King ........................................4 ..............................888-219-WOOD Ph: (888) x701 Corley Mfg401-6367 ......................................15 ............................... 423-698-0284 CW Mill ...........................................8, 10, 39 .................... 800-743-3491 F&R Mfg. .........................................22 ............................... 800-355-1250 SFPA Expo ......................................16 ............................. SFPAEXPO.com GoFast Manufacturing .................23 ............................... 800-854-7439 Great Lakes Mfg. ...........................23 ............................... 877-248-5677 Grizzly Industrial............................7, 14 ........................... 360-243-5438 ‘95 John Deere C6 Holtec ..............................................3 ................................... holtecusa.com Hurdle Machine Works Inc .........40 ...............................

901-877-6251 Tree Farmer Hurst Boiler. ...................................20 ...............................

877-774-8778 Item ID: 13920 Kilgore Saw Company ..................23 ...............................

888-857-5153 Contact: Austin ‘13 KMC 2500 Track Lignomat .........................................22 ...............................

800-227-2105 Ph: (888) 401-6367 x703 Skidder Lumbermens Wanted ...................37 ............................... 931-797-8029 Item ID: 14078 Lumbermens Web Store ..............34 ..............www.lumbermenco.com Contact: Austin Menominee Saw............................24 ............................... capacity!. Item ID800-582-0470 13421. Sam x702 Ph: (888) 401-6367 x703 Metal Detectors, Inc.....................23 ...............................

541-345-7454 BARKO Midwest Sharpening ...................21 ...............................

1994 Barko 160B -231-924-5953 Electric Multi tek North America, LLC .....18 ...............................

800-243-5438 off onto a conveyor. This is a very knuckleboom, 30' boom, 75hp Northeast Implements, Inc..........22 ............................... 607-589-6160 well built processor. Item ID 13820. motor, Rotobec continuous Pantron Automation, Inc. ............38 ............................... 800-211-9468 Sam x702 grapple, 5,000 original hours.

Piper’s Saw Shop..................... ......8 .................................. 800-845-6075 Firewood Processor - This is (excellent condition.).

Item ID Row Electric....................................21 ...............................

800-248-4479 a Chomper Model 16 PDA 13238. Chris x700989-427-2829 Ryan's Equipment ..........................12 ............................... automatice firewood 1995 Barko 775 B 205-620-4455 Feller Buncher Smith Machine Worxprocessor ....................17 ...............................

Smith Sawmill with John DeereService power ..................2 unit with ..................................

- Pumps recently 800-598-6344 redone. 400 hrs Tough Seats ....................................6 ..................................

855-579-0538 low hours. Control panel includes on injection pump. always started Woodland Mills..............................1 855-476-6455 tach, oil pressure, water temp and .................................. good. in good working order. 22in PLEASE PRINT amp gauges.

Cuts logs up to 16”.

JULYgreat.

2024 kohing head. head works

you to Change your Address One If owner andneed comes with all Item ID 13185.

Sam x702 or

Addand Your Name to our1999 mailing list, manuals receipts.

Purchased Barko 160D - newthen engine with please complete this form and mail to:

new for $32,500. Item ID 13865.

Sam x702

approximately 1500 hours. Hour

Lumbermens™meter Magazine dont work. The last 2 owners 1116 W 7th St., Ste. 297 LOGGING EQUIPMENT have only used it to load trucks or Columbia, TN 38402

Handles logs up to 32”. Uses

BANDIT as a backup as needed. Has a CTR ❑ Please Add ❑ Please Change ❑ grapple Pleasehas Remove 1999 Bandit 1900 Tracked Disc delimber, been rebuilt.

but electronic option is available.

50% or better. 475 hp Cummins Item ID 13694. Sam x702 Company Name*: ________________________________________________________

made the best valued log splitter.

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under at required Boom have minor leaks. *Company nameCarriage and address to cylinders process your change.

Diesel. 7500 Hours. One owner.

94 Barko 275 - Excellent value

Individual Name: _________________________________________________________

Well maintained. Item ID 13294.

with low at hours at 3,500. 5.9

Address:________________________________________________________________

Sam x702

CUMMINS continuous grapple.

_______________________________________________________________________

2004 Bandit Beast Model 4680 -

Runs Great!. Item ID 13740. Sam

City: ___________________________________________________________________ 3412 Caterpillar Diesel engine x702 State: __________________________________________________________________ with 850 HP. 5300 hrs. Mill in BELL Zip:____________________________________________________________________ good condition. Just finished 10 1990 Bell Super T - This Bell has

Acre clearing job, ready to work! a brand new Duetz engine. Lever Phone: _________________________________________________________________

Remote control. Big production control, 33” bar, pump and tranny Email:__________________________________________________________________

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

Boonville, New York www.starwebhosting.net/woodsmen/

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com ®

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

Danckaert Band Resaw - Roughly

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

MID-ATLANTIC

LOGGING & BIOMASS EXPO

MARKETING DIRECTOR

it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

John Williams (888) 401-6367 ext. 701 j@lumbermens.co CW has been manufacturing top quality electric

is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours

and diesel powered grinders for OVER 40 YEARS! THE PAUL BUNYAN SHOW DESIGN DIRECTOR

on the mill, electronic computer Set

HogZilla Model Cat 3406 140KW Genset, 12,400 TCII-1564P

Donna Heninger Fri, 6 Oct - Sun, 8 Oct We believe in SERVICE AFTER THE SALE! CW Mill’s CUSTOMER Cambridge, Ohio EQUIPMENT REPS SUPPORT AND PARTS availability is TOP RATED in the industry!

Sam Wall www.ohioforest.org

(888) 401-6367 ext. 702 sam@lumbermens.co

hours ready to run. Item ID 13434.

Sam x702 Connect With Us!

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

works,1 1/2" or 2" band, 22ft. track

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 39

LUMBERMENS™ MAGAZINE 1116 West 7th Street, Suite 297 Columbia, Tennessee 38401