Lumbermens July 2021 Magazine

F R E E

E Q U I P M E N T

L I S T I N G S

P G

JULY 2021 TM

pg.30>>

AUTOMATED OR MANUAL WARRIOR DO YOU NEED A ONE-PERSON PORTABLE SAWMILL? TurboSawmill is the most innovative portable sawmill in the world! Designed with swing-blade technology, unique open side frame, and patented automation.

Smith Sawmill Service is the exclusive USA and Canada distributor. View our inventory.

KEEP YOUR TURBOSAWSAW BLADES SHARP!

SAWMILL.SHOP | 1-800-598-6344

WOO THE D

FE! LI

LIVI N

Place an order for the next shipment.

DEDICATED SLABBER

TurboSawmill produces accurate, dimensional lumber with every cut. Manual or automated models are available.

IL L.S H

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer

well built processor. Item ID 13820. Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 403

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

Includes 2” Pins, Nuts & Locks

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

chain conveyer, 8 way splitter, on

KIT SPECIAL

‘83 John Deere 4850

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

Call 877.563.8899 or 250.563.8899

off onto a conveyor. This is a very

www.prolenc.com

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

Contact your local dealer or

‘13 KMC 2500 Track Skidder

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

it includes two sets of Mcdonough pressure guides. Top Casting wheel

Selma, North Carolina www.midatlantic-logging-biomass expo.com/

is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 3

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

Grapple Assist for crooked logs

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

2019 Cord King Line-up

Email: info@cordking.ca Web: www.cordking.ca ‘13 KMC 2500 Track Skidder

‘95 John Deere C6 Tree Farmer Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

TOLL FREE 1-888-219-WOOD (9663) Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820. Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’

a Chomper Model 16 PDA

automatice firewood processor

Item ID: JW-986495 withsplitter John Deere power unit with • Wedge and Contact: J Williams design tolow hours. Control panel includes suit your Ph: (888) 401-6367 x701

needs tach, oil pressure, water temp and • 24 to 72 ton splitting amp gauges. Cuts logs up to 16”. capability One owner and comes with all chain conveyer, 8 way splitter, on • trailer. The splitting 20,000lb goose neck Itemfastest ID manuals and receipts. Purchased cycle time on the 13916. Austin x703 new for $32,500. Item ID 13865. planet. Sam x702 Best Value Portable Log Splitter

Facts to consider:

- Small manufacturer in PA has

made the best valued log splitter. Handles logs up to 32”. Uses

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

1. Pioneered N. America’s first commercialChipper firewood processor in the mid 70’s 13HP Honda motor. Manual start - Cat Under Carriage at Boom cylinders have minor leaks.

drum design. Can easily load 42’

vans and produce 6 - 8 saw loads per but electronic option is available.M2030 50% orand better.M2430 475 hp Cummins 2. 3 Bar models available M1820, day. Item ID 13882. Austin x703

Has Log Lift. Uses 4-way wedge

Diesel. 7500 Hours. One owner.

Brewco Saws - Two Brewco Saws

Value! PA. Item ID 12062. Sam x702

Sam x702

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

3. 7 Slasher Available Model 44, 44HO, 48, 54 & 60low at hours at 3,500. 5.9 EDGERS & GANGS Saw Models adjustable to single two way. Great 36, Well 40, maintained. Item ID 13294. with

CUMMINS continuous grapple.

4. The Most productive machine on the planet, proven and guaranteed Firewood Processor - This is a 2004 Bandit Beast Model 4680 Runs Great!. Item ID 13740. Sam

in excellent condition. Runs great. Item ID 13644. Sam x702

homemade processor with a 10’ 3412 Caterpillar Diesel engine x702 5. Go to our web site for live action video and details www.cordking.ca FIREWOOD PROCESSORS log deck. Has a hydraulic grapple, with 850 HP. 5300 hrs. Mill in BELL 2010 Shop 6. Built Wood Processor chain andjoystick kicker that all runs off good condition. Just finished 10 1990 Bell Super T - This Bell has Available with single control - It has a 353 Detroit diesel, 40

of a 4 cylinder Mercedes power

Acre clearing job, ready to work!

a brand new Duetz engine. Lever

7. Exclusive lifetime splitter warranty and Remote 1 year bumper to bumper warranty. control. Big production control, 33” bar, pump and tranny unit. Has a 4’ chain saw that kicks

inch insert tooth circle saw, 30 foot  Issue 364 403

Lumbermens™  since 1986

❘

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

PleAse PrINt

Pulleys on Bearing . Parts Book and

belted rollcase to clear slabs and

12846. Sam x702

short pop-up transfer to edger,

where to order included. Item ID

cuts from sawline, log stop and

Zip

❑ Please Remove

loader to drop logs onto carriage,

Precision 58 Chip Pac - Single chute

stop and loader to deal with big

Sam x702

loading system,. Item ID 12764.

heavy duty log turner under log

EST

Trelan Chipper - This is a remote

logs onto carriage and track and

State

www.starwebhosting.net/woodsmen/ frame. Significant new spare parts

chipper that has been totally rebuilt with about 840 hours except for the

to be negotiated separately. Item ID

BANDMILLS & HEADSAWS DealS Month SOUTHWEST FOREST PRODUCTS EXPO Danckaert Band Resaw - Roughly Fri, 25 August Sat, 26 August From ApriL TA B L E O F C O N T E N T S

of the

V-12 Caterpillar power unit. New

13198. Sam x702

clutches, disc, bearing, liners and

Manual Four Head Block - Manual

custom chute. 23” in opening and

Four Head Block Mounted on

The Tree that Started it All!

all steel carriage. Husk. Manual Hot Springs, Arkansas www.arkloggers.com

'12 WoodmIzer LT 40

City

❑ Please Change

FOR CLASSIFIEDS Call 888.401.MENS TM CHIPPERS See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at L I S T New S York ELL EXCHANGE BUY SAVE 1986 Boonville, www.LumberMB\ISmagazine.com blades and 1 spare 36" blade),

DEPARTMENTS

V-12 Cat with 750-800 hp rating.

10 hours on this machine since it

has been rebuilt, it has a 24foot in

EquipmEnt REpREsEntativEs EST 1986

deck 20 foot out feed deck cAll uS todAy All youR uSed 72ND ANNUAL GREAT LAKES foR feed equiPMent with needS! 44 inch wheels, and all the Since 1986, Lumbermens has LOGGING & HEAVY EQUIPMENT EXPO Free Equipment published a monthly circular Listings ........................ 6 Thurs, 7 Sept - Sat, 9 Sept bells and whistles, its a production fREE EquipmEnt listings! Call –

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan(888)

Company Name*

❑ Please add

Safety Alert .......................................24-25 LIST

SELL

Morris Woods

*Company name and address required to process your change.

Deals of theext.Month ................................ 30 (888) 401-6367 704 morris@lumbermens.co

Ad Directory .......................................... 46 MARKETING DIRECTOR Reduced PRice item id:14021 contact: Sam x702

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Lumbermens Magazine

expo.com/

FAbTeK 344b

P.O. Box 1916 Columbia, TN 38402

Donna Heninger

is an extremely accurate machine

morris@lumbermensco.com

chris@lumbermensco.com

in ve1y good condition, Cuts 130

Morris Woods, Ad Sales Phone: (888) 401-6367 ext. 704 morris@lumbermens.co

feet a minute also has CLT presses.

ext. 700 chris@lumbermens.co

Lexington, Kentucky http://www.kfia.org/ Sam Wall KentuckyWoodExpo.aspx (888) 401-6367

Item ID 13876. Austin x703

S & W 125Woods Band Mill with Austin

Caterpillar generator - Low hours (888) 401-6367

on the mill, electronic computer Set

Ext. 703

works,1 1/2" or 2" band, 22ft. track

sam@lumbermensco.com

EQUIPMENT REPS

item id: 14061 contact: J Williams x701

✁

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

MAILING ADDRESS

is supported on both sides. This

Ext. 700

THE PAUL BUNYAN SHOW Ext. 702 Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co Issue 364 lumbermenS

(888) 401-6367

Ext. 704

KENTUCKY WOOD EXPO chris Woods Fri, 15 Sept - (888) Sat, 16401-6367 Sept Phone:

For classifieds Call toDay (888) 401-6367 ❘

austin@lumbermensco.com

Cambridge, Ohio www.ohioforest.org

(888) 401-6367

 liSt  Sell  exchange  buY  Save

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Austin Woods Phone: (888) 401-6367 ext. 703 austin@lumbermens.co

** INFO LINK**

 Since 1986

SAVE

pressure guides. Top Casting wheel

2012 JoHn deere Selma, North Carolina (888) 401-6367 548G3 www.midatlantic-logging-biomass LOGGING & BIOMASS EXPO

BUY

it includes two sets of Mcdonough Chris Woods

AD Sales

Calendar of Events ................................ 29 MID-ATLANTIC ADVERTISING SALES

EXCHANGE

that go up and down, with airbags,

EXCHANGE

item id: 14061 contact: Austin x703

Phone

Address

Individual Name

Woods Publishing

If you need to Change your Address or Add Your Name to our mailing list, then please complete this form and mail to:

LIST

MID-ATLANTIC & BIOMASS B U Y LOGGING SAVE Morris Woods Fri, 15 Sept Sat, 16 Sept News .......................................26-29 EST 1986

In thePUBLISHER



machine, with air strain conveyers 401-6367

❘

Ext. 701

Sam x702

Sam Wall Phone: (888) 401-6367 ext. 702 sam@lumbermens.co

CARRIAGES & Joe Ferrazzano

DRIVES

2010 Cardinal HD Carriage (888) 401-6367

Carriages (Sawmill) - Cardinal

 lumbermenSmagazine.com

Ext. 709

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28 cj@lumbermensco.com

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) ........ 36 Send address changes to: SUBSCRIPTION: Lumbermens™, a trade newspaper for the logging, Lumberman's Exchange Mfgwood .............................. sawmilling, manufacturing, andCorley secondary manufacturing32 P.O.pallet Box 1916 industry, is freeTN within the United States to qualifying manufacturers Columbia, 38402 CRD Metalworks .................... 25 and industry suppliers. Please limit your subscription to one free copy per company orExchange mill locatiison. The Lumberman's CW Mill-ArmorHog .............. 17

Morbark ..................................... 9

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

published monthly by Woods Send address changes to Lumbermens™ CHANGE OF ADDRESS: CW Mill-Hogzilla ................... 15 Publishing, Box 1916, Magazine,P.O. 1116 W. 7th St., Ste. 297, Columbia, TN 38401. When Columbia, TN 38402. All rights possible, please include an old addressDyna label. Products ........................ 35 reserved. All editorial/ advertorial REPRODUCTION AND Adverti sers are................... responsible 8 submissions are used at the RESPONSIBILITY: Empire Hydraulics discretion of the publisher and may for the contents and claims of their advertising. Lumbermens™ accepts beno edited for purposes of their clarityclaims. No Great Lakes Mfg. .................... responsibility for part of this publicati on may be34 and space. Although all efforts reproduced or transmitt edhave in any form or by any means, electronic Hahn Machinery ...................... been to ensure accuracy photocopying, of or made mechanical, including recording or any information 3 content submitted by advertisers storage retrieval system, without Hurst permission of Lumbermens™.14 Boiler ............................. and writers, the Lumberman's Negatives, artwork, and other items submitted for publication in Exchange, its principles and IronserQs. Bull ................................... Lumbermens™ are the property of adverti Lumbermens ™ owns21 associates, are not held liable for material typeset and/or designed by Lumbermens ™ and reserves the errors or omissions. Reproduction, Kilgore Saw ............................. 22 use outside ofwith Lumbermens™. Lumbermens™ will exercise in right wholeto orits part, is prohibited precauti on in writing, designing,Lignomat and printi................................. ng material contained 24 outevery written consent. within. We shallWoods not bePublishing liable for omissions or typographical errors. ©2017

- USED FORESTRY EQUIPMENT FOR SALE

❘

joe@lumbermensco.com

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

The TreeSTACKING that Started RAC it All!

Multitek ................................... 12

Piper's Saw Shop.................... 13

Rotochopper............................ 40

Row Electric ............................ 20

Sawmill Exchange .................. 11 Since 1986, Lumbermens™ has pub lished a month ly circular Select Sawmill ......................... 19 reaching sawmills, loggers, pallet makers, recyclers and industrial woodSawmill working........................... plants worldwide. Smith 4 PUBLISHER The Paul Bunyan Show ......... 39

AD SUBMISSIONS May be sent to— morris@lumbermensco.com

Woods Publishing

Thomas Industrial Controls..... 10 DESIGN DIRECTOR

Union Grove Saw & Knife.. 2, 37 Ted Monnin Universal Refiner ................... 23

MAILING ADDRESS 1116 W. 7th St., Ste. 297 • Columbia, TN 38401 WoodMizer ................................ l (888) 401-6367

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

POSTMASTER Send address changes to: Lumbermens™ Magazine 1116 www.BakerProducts.net W. 7th St., Ste. 297 • Columbia, TN 38401

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 5

Phone 315.284.4126 Fax Phone 315.849.2045 315.284.4126 Website Fax www.empirehyd.com 315.849.2045 Email Website “Precision Under Pressure” info@empirehyd.com www.empirehyd.com Email “Precision Under Pressure” info@empirehyd.com

‘93 Barko 180B

FREE EQUIPMENT

‘16 Halverson H140 ID: 14077 ‘93Item Barko 180B Contact: Austin Skidsteer (DEMO) ‘16 Halverson H140 Item ID: 14077 Ph: (888) 401-6367 x703 Item CALL ID: JW-909632 LISTINGS, (888) 401-MENS Contact: Austin Skidsteer (DEMO) Contact: J Williams

under log Cuts stop130 and loader to condition, feet a minute deal with big logs onto carriage also has CLT presses. DANCKAERT BAND DANCKAERT BANDRESAW RESAW andItem track frame. IDand 13876. Austin x703 Roughly Roughly 1010 hours hours onon this this CARRIAGES & Sam DRIVES Item ID 13198. x702 machine machine since since it it has has been been 2010CHIPPERS CARDINAL HD rebuilt, hasa a2424foot footininfeed feed rebuilt, it ithas CARRIAGE58 CARRIAGES PRECISION CHIP PAC deck foot out feeddeck deckwith with deck 2020 foot out feed Cardinal Carriage linesystem. it includes chute loading inch wheels, andallallthe thebells bells Single 4444 inch wheels, and carriage with onboard Item ID 12764. Sam x702log and whistles, its a production and whistles, its a production turners, carriage drive, hyd COMPLETE SAWMILLS machine, with air strain machine, with air conveyers strain for carriage, sawyers cab, that go that up go and down, with pac conveyers up and down, 2006 WOODMIZER LT300 computer controls, cabinet with airbags, it includes two sets of with airbags, it includes two This mill is currently running, electronic drives for carriage Mcdonough pressure guides. Top and sets of Mcdonough pressure includes the sawmill, and knees, husk including 48” Casting wheel is supported on guides. Top Casting wheel is cab. An incline conveyers, a bottom saw and 36” top saw, both sides. an extremely supported on This bothissides. This is transfer table and two sets of accurate machine in very good short pop-up transfer to edger, an extremely accurate roller tables. This mill saws a 13428 Victory Ln. //machine PO Box 124 in very13428 goodVictory conditi on, Cuts million board feet or more of Adams Center, NY Ln. //13606 PO Box 124 130 feet aAdams minuteCenter, also has CLT walnut every year. Max log NY 13606 presses. diameter 36in, Max Width Item ID 13876. Austin x703 of cut 25in, The width of the CARRIAGES & DRIVES band is 1 1/2 Inches. Video of it operating is available, and can 2010 CARDINAL HD be sent upon request. CARRIAGE CARRIAGES Item ID 13892. Austin x703 Cardinal Carriage line it includes DRY KILNS carriage with onboard log turners, carriage drive, hyd ‘05 Gehl MECCTL 12 X 70 38 ‘05 ID: Gehl CTL 70DRYER pac for carriage, sawyers cab, Item TRIPLE PASS DRUM JW-986495 computer controls, cabinet with Comes Item ID: JW-986495 with trunnions, drum Contact: J Williams electronic drives for carriage drive, Contact: J Williams fan and cyclone. Ph: (888) 401-6367 x701 ‘83 John Ph: 401-6367 x701 knees, huskDeere including 48” Item(888) ID 13925. Austi n x703 ‘83 John Deere bott om saw and 36” top saw, 4850 short pop-up transfer to edger, chain conveyer, 4850 MEC 812 X 42 way splitter, on Item ID: 14073 chain conveyer, 8DRUM way splitter, on belted rollcase to clear slabs 20,000lb TRIPLE PASS DRYER Item ID: 14073 goose neck trailer. Item ID Contact: Austin 20,000lb trailer. ID andContact: cuts fromAustin sawline, log stop 12 x 42 goose Mec neck triple passItem Drum 13916. Austin x703 Ph: (888) 401-6367 x703 andPh: loader drop logs onto Dryer, comesx703 with trunnions. 13916. Austin (888)to401-6367 x703 Value Log Splitter carriage, heavy duty log turner Best Item ID Portable 13924. n x703 Best Value PortableAusti Log Splitter BANDMILLS && HEADSAWS BANDMILLS HEADSAWS

Item ID: JW-909632 belted rollcase to clear slabs Ph: (888) 401-6367 x701 DYNAMIC CHIPPERS Contact: J Williams and cuts from sawline, log stop 2004 JCB 441 WHEEL LOADER Ph: (888) 401-6367 x701 and loader drop onto 3,509 hoursto on thislogs machine, carriage, heavy duty log turner everything works as it should. I under log stop and loader to have many videos available of it deal with big logs onto carriage running, and can be sent upon and track and frame. request. Item ID 13198. Sam x702 Item ID CHIPPERS 13888. Austin x703

Ph: (888) 401-6367 x703 unit. Has athe 4’ chain saw that and includes sawmill, and kicks onto aconveyers, conveyor. This cab. Anoff incline a is a verytable well and built two processor. transfer sets of roller This Sam mill x702 saws Itemtables. ID 13820. a million board feet or more of walnut every year. Max log FIREWOOD PROCESSOR diameter Max Model Width 16 This is a36in, Chomper ofPDA cut 25in, The width the automati ce of ﬁrewood ‘95 John Deere C6 band is 1 1/2 with Inches.John VideoDeere of processor John Deere C6 it‘95 operating is available, and Treeunit Farmer power with low hours. can be sent upon request. Control panel includes tach, Item ID: 13920 Tree Farmer Item ID 13892. Austin x703 and oil pressure, water Contact: Austin temp Item ID:DRY 13920 KILNS amp gauges. Cuts logs up to Ph: (888) 401-6367 x703 Contact: Austin MEC 12 X 38 16”. One owner and comes Ph: (888) 401-6367 x703 TRIPLE DRUM DRYER with allPASS manuals and receipts. Comes with new trunnions, drum Purchased for $32,500. capacity!. Item ID 13421. Sam x702 drive,Item fan and cyclone.Sam x702 ID 13865. capacity!. ID BARKO 13421. Sam x702 ItemLOGGING IDItem 13925. Austin x703 EQUIPMENT

PRECISION 58 585 CHIPCHIPPER PAC 2008 DYNAMIC Single chute loading system. This is a 2008 dynamic cone ItemKMC ID 12764. Sam x702 ‘13 2500 head chipper withTrack 1700 COMPLETE SAWMILLS ‘13 KMC 2500 Track hours, in very good condition. Skidder 2006 WOODMIZER Easily produces highLT300 quality Skidder Item ID:is14078 This mill running, chips withcurrently patented ‘Cone’ Contact: Austin Item ID: 14078 drum design. Can easily load Ph: (888)Austin 401-6367 x703 Contact: 42’ vans and produce 6 - 8 Ph: (888) 401-6367 x703 loads per day. 1994 BarkoBARKO 160B - Electric BANDIT Item ID 13882. Austin x703 1994 BarkoMEC X 42 160B12 - Electric off onto a conveyor. This is a very knuckleboom, 30' boom, 75hp FIREWOOD PROCESSORS 2004 BANDIT BEAST MODEL TRIPLE PASS DRUM DRYER 30' boom, 75hp off onto a conveyor. This is aID very well built processor. Item 13820. knuckleboom, motor, Rotobec continuous 4680 12 x 42 Mec triple pass Drum 2010 SHOP BUILT Rotobec continuous well processor. Item ID 13820. motor, Sambuilt x702 grapple, 5,000 original hours. 3412 Caterpillar Diesel engine Dryer, comes with trunnions. WOOD PROCESSOR grapple, 5,000 original hours. Sam x702 Firewood Processor - This is 40 Item (excellent condition.). Item ID in with 850 HP. 5300 Mill ID 13924. Austinhrs. x703 It has a 353 Detroit diesel, condition.). Item Firewood Processor -16 This is good condition. JustIDfinished DYNAMIC CHIPPERS inch insert tooth circle saw, (excellent a Chomper Model PDA 13238. Chris x700 10 Acre clearing job, ready Chris x700 a30 Chomper Model 16 PDA foot chain conveyer, 8 way 13238. 2004 JCB 441 WHEEL LOADER automatice firewood processor 1995 Barko 775 B Feller Buncher to Barko work! Remote control. Big splitt er, on 20,000lb goose neck 3,509 hours on this machine, 1995 775 B Feller Buncher automatice firewood processor with John Deere power unit with - Pumps recently redone. 400 hrs production capacity! everything works as it should. I have trailer. - Pumps recently redone. 400 hrs with John Deere power unit with low hours. Control panel includes onItem injection pump. always started IDavailable 13421. x702 many videos ofSam it running, Item IDControl 13916.panel Austiincludes n x703 on injection pump. always started low hours. tach, oil pressure, water temp and andgood. good working order. 22in BARKO can beinsent upon request. good. in good working order. 22in tach, oil pressure, water temp and Item ID 13888. Austin x703 amp gauges. CutsPROCESSOR logs up to 16”. kohing head.BARKO head works great. FIREWOOD 1994 160B kohing head. head works great. amp gauges. Cuts logs up to 16”. This is a homemade processor Electric 30’ boom, One owner and comes with all Item ID knuckleboom, 13185. Sam x702 ID 13185. x702 continuous One owner and log comesdeck. with allHas a Item with a and 10’ 75hp motor,Sam Rotobec manuals receipts. Purchased 1999 Barko 160D - new engine with Barko 160D engine with(exmanuals and grapple, receipts. Purchased hydraulic chain and 1999 grapple, 5,000- new original hours. new for $32,500. Item ID 13865. approximately 1500 hours. Hour kicker that all runs off of a approximately cellent condition). 1500 hours. Hour new for $32,500. Item ID 13865. x702 meter dont13238. work. The lastx700 2 owners 4Samcylinder Mercedes power meter Item Chris dont ID work. The last 2 owners Sam x702

If you recognize this…

with 1700 hours, in very good - Small manufacturer in PA has LOGGING EQUIPMENT have only used it to load trucks or have only used it to load trucks or - Small manufacturer in PA has with 1700 hours, in very good LOGGING EQUIPMENT condition. Easily produces high made the best valued log splitter. BANDIT as a backup as needed. Has a CTR as a backup as needed. Has a CTR made the best valued log splitter. condition. Easily produces high BANDIT quality chips with patented ‘Cone’ Handles logs up to 32”. Uses 1999 Bandit 1900 Tracked Disc delimber, grapple has been rebuilt. delimber, grapple has been rebuilt. Handles logs up to 32”. Uses quality chips with patented ‘Cone’ 1999 Bandit 1900 Tracked Disc 1500 ModelCarriage at drum design. Can easily load 42’ 13HP Honda motor. Manual start Chipper - Cat Under Boom cylinders have minor leaks. EQUIPMENT FOR- Cat PALLET BUSINESS Boom cylinders have minor leaks. 13HP Honda motor. Manual start drum design. Can easily load 42’ SECOND-HAND Chipper Under Carriage at vans1.and produce 6 8 loads per but electronic option is available. 50% or better. 475 hp Cummins Item ID 13694. 0Sam LUMBER SORTERS (Huot): withisr available. un around system. Ver475 y GOOD CONDITION! 13694. $105,0 0. x702 Item ID Sam x702 butComplete electronic option vans and produce 6 - 8 loads per 50% or better. hp Cummins STACLER AND TRIM (Home Complete with r un around 0 0. day.2. Item ID 13882. Austin x703 SAWS Has 96" Log Lift. Uses made): 4-way wedge Diesel. 7500 Hours. Onesystem. owner.  $54,0 94 Barko 275 - Excellent value 94 Barko 275 - Excellent value Has Log Lift. Uses 4-way wedge day. Item ID 13882. Austin x703 Diesel. 7500 Hours. One owner. 3. SILO (Little David): New! adjustable 12.5' Dia. 40' High. SprGreat inkler and inter nal unloading system. with  $30,0at0hours 0. at 3,500. 5.9 EDGERS & GANGS to single two way. Well maintained. Item ID 13294. with lowlow at hours at 3,500. 5.9 adjustable to single two way. Great Well maintained. Item ID 13294. EDGERS & GANGS

you need MISS THAT! oneDON'T of these.

Don’t just fix it again, get the permanent solution!

4. BAND SAW (Pendu 5400): Cutting capacit y 8"x12". VERY GOOD CONDITION!  $18,70 0.

Brewco Saws - Two Brewco Saws PA. Item Sam x702 x702 Sam Samx702 x702 CUMMINS continuous grapple. Value! ItemID ID12062. 12062. Brewco Saws - TRIM Two Brewco Saws(BigValue! 5. PALLET SAWS Jake):PA.Available for Sam Blocks and deck board  $17,0 0 0 ea. CUMMINS continuous grapple. in excellent condition. Runs great. Firewood Processor This is a 2004 Bandit Beast Model 4680 Runs Great!. ID 13740. 6. THREEcondition. HEAD Runs PALLET (Pallet System):  Beast $12,50 0. 4680 Runs Great!. ItemItem ID 13740. Sam Sam Firewood Processor - ThisRepair is a 2004 Bandit Model in excellent great. DISMANTLER Item7. IDPLATE 13644. Sam x702 processor with 10’ 3412Caterpillar Caterpillar engine FIXER MACHINE homemade FOR STRINGER Wor kshop):  $5,0Diesel 0Diesel 0. engine homemade processor(Rene with aa 10’ 3412 Item ID 13644. Sam x702 8. SCRAGG MILL (Big Jake): Twin, center, band saw,...  $60,0 0 0. FIREWOOD PROCESSORS log with850 850HP. HP.5300 5300 hrs. Mill logdeck. deck.Has Hasaahydraulic hydraulic grapple, grapple, with hrs. Mill in in FIREWOOD PROCESSORS

9. STUMP MACHINE (Bob Shear M-300): New!  $20,70 0.good condition. Just finished 10 good condition. Just finished 10

20102010 Shop Built Wood Processor chain off chainand andkicker kickerthat that all all runs runs off Shop Built Wood Processor 10. VIKING TURBO 505 COMING SOON! - It has a 353 Detroit diesel, 40 of a 4 cylinder Mercedes power of a 4 cylinder Mercedes power - It has a 353 Detroit diesel, 40

www.prolenc.com

+1 819 388 5499

 Issue 364 ™ ™ since 403364  Issue Lumbermens since1986 1986 384Lumbermens

Acreclearing clearingjob, job, ready work! Acre ready to to work!

Remotecontrol. control.Big Big production Ericfafard@interco.qc.ca Remote production

Call 877.563.8899 250.563.8899 inchinch insert tooth circle saw, 30 30 foot unit. Has kicks unit. Hasaa4’4’chain chainsaw saw that that kicks insert tooth circle saw, foot or ❘❘

 seLL   exchange exchangebuy buy  save  List List  seLL save

x702 x702

BELLBELL

1990 Super T - This Bell has 1990 BellBell Super T - This Bell has a brand new Duetz engine. a brand new Duetz engine. LeverLever

control, pump and tranny control, 33” 33” bar, bar, pump and tranny ❘

❘  LumbermensCO.com  LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 7

140

Phone 315.284.4126 Fax BELL TREE CUTTER BELL 315.849.2045 Around 1000 hours on the Website 1990 BELL SUPER T machine. New air cooled motor www.empirehyd.com This Bell has a brand new DuetzEmail “Precision Under Pressure” engine. Lever control, 33” bar,info@empirehyd.com pump only about 300 hours. Rebuilt

and tranny has been rebuilt not long ago. Hour meter is inop. New paint. Runs perfect. Has heat and air, it just needs to be ﬁxed. Item ID 13896. Sam x702

1993 BELL SUPER T Good running condition. 33” Bar Saw. Tires at 50%. Deutz engine. Hour meter broken. Item ID 13543. Sam x702

000

702

CASE

2006 CASE 440 SKID LOADER With only 871 hours, this machine starts, runs, and operates like new. I have many videos available and can be sent upon request. Item ID 13886. Austin x703

PIPER’S Saw Shop

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

5 7 0 6 • 5 4 8 • 800

off onto a conveyor. This is a very

well built processor. Item ID 13820. Sam x702

Promotional Pricing Offer

Simonds Red Streak Hard Back ‘057/8” Gehl CTL 70 1-1/4” x .042 x 3/4” or L im it e d Length 13’2”Item ID: JW-986495 Contact: J Williams T im e Ph: (888) 401-6367 x701

$14.71 $14.27 each

‘83 John Deere 4850 Tell us you saw it here! Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

O n ly

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

this skidder at only 3700. These

Firewood Processor - This is a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off

ly - It has a 353 Detroit diesel, 40 of a 4 cylinder Mercedes power ower inch insert tooth circle saw, 30 foot unit. Has a 4’ chain saw that kicks ew  Issue 1986 403 arch with364 winch.Lumbermens Low hours on™  since Cat D5B Dozer❘ - Cat  D5BList s/n  seLL

still

stick and bucket cylinder have been repacked. It has a thumb and bucket on it, also has a 230 Waratah processing head that can be sold with it. Hours are around 19k, motor has been ‘93 Barko replaced a couple180B years back. Item ID: 14077 daily. Machine is working Contact: Austin Item ID 13936. Austin x703 Ph: (888) 401-6367 x703 1994 CATERPILLAR D4 HI TRACK WITH GRAPPLE This is an extremely low hour dozer/skidder with only 2800 actual hours. Comes with new 30” pads and chain. Undercarriage is still in excellent shape. Fixed grapple and no winch. ‘95 John Deere C6 Item ID 13932. Sam x702

Tree Farmer

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

used vans and produce 6 - 8 loads per or a day. Item ID 13882. Austin x703

702

dangling head. Several bars and chains. Machine came oﬀ the job in February and is ﬁeld ready. Item ID 13943. Austin x703

99’ CASE 850G LONG TRACK DOZER One owner machine, only 3300 original hours, has never been used in the woods, it has a ripper on the back, original pads, and ‘16 Halverson H140 chains, Under carriage is new along with new(DEMO) rollers on the Skidsteer bottom, new sprockets. Item ID:and JW-909632 Item ID 13909. Austin x703 Contact: J Williams CATERPILLAR Ph: (888) 401-6367 x701 1994 CATERPILLAR 320 Dry machine that is in good condition for the year. The

22X380, direct drive, EROPS,

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

1996ID: CAT 214 MOBILE Item 13920 EXCAVATOR Contact: Austin with magnet 3 tons steel Ph:36’ (888) 401-6367 x703 shear. low hrs! All hard tires, 4 outriggers ideal for scrap business. It also has 48’ swavel capacity!. Item ID 13421. Sam x702 bucket for street ditch clean up. BARKO Item ID 13441. Sam x702 1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 exchange buy save come hook up to  it and go  to your

job site and put it to work to up

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

Selma, North Carolina www.midatlantic-logging-biomass expo.com/

CARRIAGES & DRIVES

LINK** Carriages (Sawmill) - Cardinal Field Proven Design forINFO the Independent Hardwood Sawmill MAILING ADDRESS

2010 Cardinal HD Carriage

Carriage line it includes carriage

B & B Mfg . ............................... 18 M&F Gauge ............................. 28- Two proven P.O. Box 1916 • Corley lnfeed and Edger with Lewis Optimization with onboard log turners, carriage Columbia, TN 38402-1916 B. H. Payne .............................. 16 Meadows Mill, Inc. ................ 33 drive, hyd pac for carriage, (888) 401-6367 names with proven results Menominee Saw ..................... 29 Baker ...................................... 5, 7 sawyers cab, computer controls, AD SUBMISSIONS May be sent to cabinet with electronic drives for • True HardwoodBell's Optimization Machining ..................... 27 Metal Detector's Inc. .............. 30 morris@lumbermens.co carriage knees, husk including Brute Force Mfg. ..................... 31 Midwest Sharpening.............. 26 • Small footprint that fits inside most existing mills POSTMASTER 48" bottom saw and 36" top saw Buck Equipment (AIM) ........ 36 Morbark ..................................... 9 Send address changes to: Exchange •Lumberman's Value priced with allMfgof.............................. the optimization capability12 of more Corley 32 Multitek ................................... P.O. Box 1916 Columbia, TN 38402 CRD Metalworks .................... 25 Piper's Saw Shop.................... 13 elaborate high speed Edger Optimizers

STACKING For more information on our new "M" Series Edger RAC and

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

other Corley and Lewis products, give us a call. LEWIS CONTROLS CORLEY SAWMILL OPTIMIZATION MACHINERY Chattanooga, Tennessee Iron Bull ................................... 21

Kilgore Saw ............................. 22 Phone 423-698-0284 Lignomat ................................. 24

www.corleymfg.com

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Cornelius, Oregon

Union Grove Saw & Knife.. 2, 37

Phone 503-648-9119

Universal Refiner ................... 23 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY TODAY l§

www.BakerProducts.net

www.lewiscontrols.com 800.S48.6914 I S73.663.7711 ❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 9

Phone 315.284.4126 1998 CATERPILLAR 515 Fax70%. This is a really nice 315.849.2045 Grapple with winch, no heat skidder for the price. Website or air. Open cab skidderwww.empirehyd.com with Item ID 13816. Sam x702 9800 hours. are 28L’s,Email “Precision UnderTires Pressure” info@empirehyd.com

rear 90% and fronts are 30% with new bear paws chains. Item ID 13801. Sam x702

2005 CATERPILLAR 525B This is a dual arch skidder with winch. Very low hour skidder with 7900 frame hours and only 63 hours on a new engine. Continuous grapple, tires are 30.5’s @

2007 CATERPILLAR D6N LGP DOZER ENCLOSED CAB Overall: Cab Heat & AC, 150HP Cat C6.6L, 90% Undercarriage, GPS Ready, Sweeps & Rear Screen, 13’6” PAT Blade, 39,500 LBS, Hours: 7,867 Horsepower: 150 S/N: ALY03028. Item ID 13567. Chris x700

2000 CAT 515 GRAPPLE SKIDDER One Owner Runs great! Is it an excellent condition. Rubber is around 75% Has new Hydraulic pump and Charge pump. Item ID 13616. Sam x702

‘16 Halverson H140 CLARK Skidsteer (DEMO) CLARK RANGER 665D

Tight and dry machine, Item ID: JW-909632 rebuilt motor. hour meter Contact: J Williams Ph: (888) broken, It 401-6367 has a 353x701 Detroit, with grapple, and winch, always fires right up, and

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 403

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

‘92Tree JOHN DEERE 590 D CUTTER Farmer Will need pads in the future, Item ID: 13920 sprockets and rails are about Contact: Austin 85%, it has a 4cyl JD motor. It Ph: (888) 401-6367 x703 has a Rotnee dangle hd. w/ a bar saw and a spare idler. Item ID 13612. Chris x700

capacity!. Item ID 13421. Sam x702

amp gauges. Cuts logs up to 16”.

DUEL ARCH kohing head. headSKIDDER works great. Slick Runs good moItem Machine. ID 13185. Sam x702 tor is in top notch condition. 1999 Barko 160D - new engine with Item ID 13610. Sam x702

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702

LOGGING EQUIPMENT BANDIT

50% or better. 475 hp Cummins

Value! PA. Item ID 12062. Sam x702

EXPORT LOG DEBARKING LINE Reconditioned 35 Nicholson A-5 debarker, cab, infeed hour glass rolls, log dischage belt with side log kickers. Call 208451-0365 for details. $279,000 JOHNDeere DEERE C6 ‘95 John

on injection pump. always started

tach, oil pressure, water temp and

but electronic option is available.

adjustable to single two way. Great

JEM

low hours. Control panel includes

1999 Bandit 1900 Tracked Disc

Has Log Lift. Uses 4-way wedge

EARLY 70’S CLARK 664 CABLE SKIDDER some center slack, needs front ‘93comes Barko tires, with180B a spare tire. Item ID: 14077 Gearmati c 19 winch doesn’t hold Contact: Austinpower unit. good. 453 Detroit Ph: (888) 401-6367 Item ID 13629. Samx703 x702

1995 JOHN DEERE BARKO C6 TREE FARMER 1994 Barko 160B - Electric Only 20 hours on a new 5.9 off onto a conveyor. This is a very knuckleboom, 30' boom, 75hp Cummins engine. The whole well built processor. Item ID 13820. motor, Rotobec continuous center has been ﬁxed, and line Sam x702 grapple, 5,000 original hours. is bolt redone, transmission Firewood Processor - This is condition.). Item ID It ti(excellent ght, center pins are good. has a full a Chomper Model 16 PDA 13238. Chrisspeed x700 tranny, with two reverse, winch. automatice firewood processor 1995 Barko 775 Bwith FelleraBuncher Working daily. with John Deere power unit with - Pumps recently redone. 400 hrs Item ID 13920. Austin x703

Handles logs up to 32”. Uses

13HP Honda motor. Manual start

runs with no issues. Item ID 13748. Austin x703

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

good condition. Just finished 10

Acre clearing job, ready to work! Remote control. Big production

 List  seLL  exchange  buy  save

good. good working 22in 2004in648GIII JOHN order. DEERE

approximately 1500 hours. Hour

meter work. The last 2 owners 2004dont JOHN DEERE 648GIII This total havemachine only usedhas it to 13000 load trucks or hours on the body, with as a backup as needed. Has aonly CTR 3000 hours on the new modelimber, grapple has been rebuilt. tor, comes with a set of chains, Boom cylinders have minor leaks. working daily. Item Sam x702n x703 ItemID ID13694. 13878. Austi 94 Barko 275 - Excellent value

with 2006 low at JOHN hours atDEERE 3,500. 5.9

700J DOZER grapple. CUMMINS continuous This work horse comes Runs Great!. Item ID 13740. Sam with a winch, and new x702 undercarriage, it is tight BELL daily with and dry & running 4500 hours. 1990 Bell Super T - This Bell has IDnew 13883. n x703 aItem brand DuetzAusti engine. Lever

control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass expo.com/

** INFO LINK**

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 11

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

2006 JOHN DEERE 748GIII 8700 hours, running daily. Item ID 13881. Austin x703

Connect

13428 Victory Ln. // PO Box 124 Explore Adams Center, NY 13606

Discover

‘05 Gehl CTL 70

Item ID: JW-986495 EXPO 2021 is your chance to gather with Contact: J Williams other hardwood and softwood Ph: (888) sawmillers 401-6367 x701

‘83 John withDeere operations of all sizes, celebrate new 4850 technology, network, and learn about the

chain conveyer, 8 way splitter, on products. Item ID: 14073 industry’s latest 20,000lb goose neck trailer. Item ID Contact: Austin 13916. Austinwill x703 Ph: (888)Over 401-6367 x703 95 exhibiting companies be at

Portable Log Splitter EXPO 2021, along withBest keyValue representatives frominthe largest wood products with 1700 hours, verynation’s good - Small manufacturer in PA has manufacturers. is your tolog splitter. condition. Easily produces high Thismade the chance best valued jumpstart elevate quality chips with patented your ‘Cone’career, Handles logs upyour to 32”. Uses business, and make important drum design. Can easily load 42’ 13HP Honda motor. Manual start connections leaders. vans and produce 6 - 8 loads perwith industry but electronic option is available. It all starts at EXPO 2021! day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702

August Firewood 11 - 13 Processor - This is a

in excellent condition. Runs great.

Georgia Item ID 13644. Sam x702 World

Congress Center homemade processor with a 10’ Atlanta, GA FIREWOOD PROCESSORS log deck. Has a hydraulic grapple,

2010 ShopDon’t Built Wood chain and kicker that all runs off miss Processor this year’s biggest sawmilling event! - It has a 353 Detroit diesel, 40

of a 4 cylinder Mercedes power

inch insert tooth circle saw, 30 foot  Issue 364 403

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

2006 JOHN DEERE FIREWOOD PROCESSOR This is a Chomper super 14, ‘16 Halverson with a 60hp engine.H140 In very nice shape. Only 171 hours, Skidsteer (DEMO) comes green chain Item ID:with JW-909632 conveyer. of the manuals Contact: All J Williams for the 401-6367 engine, and Ph: (888) x701 the chopper itself come with it, as well as all of the electrical schematics. Item ID 13894. Austin x703 2012 JOHN DEERE 548GIII Single arch with winch, blade extensions, 1 new 28L and 3 @ 50%. This is still a new machine with only 3600 hours. ItemKMC ID 13780. SamTrack x702 ‘13 2500

Skidder 2009 JOHN DEERE 648H This a one owner machine, ItemisID: 14078 every switch works, interior Contact: Austin isPh: very clean, radio,x703 heat/ac. (888) 401-6367 Air ride works as it should. Tires are 30.5x32. Extremely off ontomachine a conveyor. Thisno is aleaks. very clean with Cutti ng processor. edge onItemblade is well built ID 13820. excellent, Sam x702 with no cracks or welds anywhere. Firewood Processor - This is Item ID 13747. Austin x703 a ChomperFRANKLIN Model 16 PDA automatice firewood processor

1995 FRANKLIN 170 with John cab, Deeresingle powerarch unitwith witha Enclosed low hours. includes winch, newControl paint, panel 4 brand new 23.126 ﬁrestonewater tires,temp around tach, oil pressure, and 15000 hours.Cuts logs up to 16”. amp gauges. Item ID 13910. Austin x703 One owner and comes with all

manuals and receipts. Purchased 2003 FRANKLIN Q80

new for $32,500. Item ID 13865. GRAPPLE SKIDDER 7500 hours, but just 5000 hours Sam x702 on reman engine. New Radiator; LOGGING EQUIPMENT New Hydraulic Pump; Comfort BANDIT cab with good working heat and 1999Tires Bandit 1900 Tracked Disc air; at 80%. Chipper - Cat UnderSam Carriage Item ID 12450. x702at 50% or better. 475 hp Cummins GRINDMASTER Diesel. 7500 Hours. One owner. SUDDRETH HORIZONTAL

GRINDER Well maintained. Item ID 13294. This a 60 HP low rpm Horizontal Sam is x702 grinder, comes with a blower, and 2004 Bandit Beast Model 4680 the blower connects to the grinder 3412 Caterpillar Diesel engine with a pipe. It has top and bottom with 850 HP.Overall 5300 hrs. Millused, in in infeed rolls. lightly good condition. Just finished 10 really good shape. Width capacity is around 30” job, maybe even Acre clearing ready to wider. work! Item ID 13889. n x703 Remote control. BigAusti production

 List  seLL  exchange  buy  save

HYDRO-AX

1998 HYDRO AX 611EX SAW HEAD FELLER BUNCHER with about 8800 hours. Bunching Saw Head has large pocket for accumulation ‘93 Barko 180B and lift ing side Item ID: 14077 shield for notching Contact:larger Austintrees before felling. Cummins engine. Ph: (888) 401-6367 x70328L tires at 60%. Decent running condition. Item ID 13245. Sam x702 2002 HYDRO AX 621E Arouund 12,000 hours on this machine. Working daily. Item ID 13884. Austin x703

‘95 C6 1998John 711EXDeere SAW HEAD FELLER BUNCHER Tree Farmer 30.5-32 tires at 40%; Cummins

Itemrebuilt ID: 13920 Engine 1500 hours ago; Contact: 8750 hours; Austin Quadco 22” Large Ph:saw (888) 401-6367 x703 tree head. Heat and A/C work. New bearings in saw. Cutting trees today. capacity!. ID 13421. Sam x702 Item IDItem 13353. Sam x702 KMC BARKO 1994 Barko 160B - Electric2500P KMC TRACK SKIDDER John Deere30' boom, Dual 75hp Arch knuckleboom, Grapple, Johncontinuous Deere winch, motor, Rotobec Model 4000, Cummins grapple, 5,000 original hours. Engine, Model 6BTA, Clark (excellent condition.). Item ID Transmission 28000. 13238. Chris x700 Austin x703 Item ID 13738. 1995 Barko KOMATSU 775 B Feller Buncher

- Pumps recently redone. 400 hrs 2007 KOMATSU PC220LC w/2009 Log Max 7000XT on injection pump. always started processing head. 9700 order. hours22in on good. in good working carrier. 7200 hours on Log Max. kohing head. head works great. Excavator style. Cab guard. Item ID SamOne x702 owner. Flotati on13185. pads. 1999 Barko 160D new Very good condition. engine with Item ID 13464. x702 approximately 1500Sam hours. Hour

meter dont work. The last 2 owners

2008 KOMATSU D61-EX DOZER as a backup as needed. Has a CTR Great Condition. 4511 Hours. delimber,U/C grapple has been Komatsu at 95%. 35% rebuilt. Pads. leaks. 6Boom Waycylinders Blade. have Fullyminor Enclosed comfort cab. Great price! Item ID 13694. Sam x702 13570. Sam value x702 94Item BarkoID275 - Excellent have only used it to load trucks or

with low at hours at 3,500. 5.9

2012 KOMATSU D61EX 15

CUMMINS DOZER continuous grapple.

Runs Great!. Item ID 13740.Triple Sam with only 750 Hours. Rippers; Limb Sweeps; Enclosed x702 cab with Heat/AC; BELL6 way blade; Undercarriage at 90%; Excellent 1990 Bell Super T - This Bell has Condition! a brand new Duetz Sam engine. Lever Item ID 13459. x702

control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

it includes two sets of Mcdonough pressure guides. Top Casting wheel

Selma, North Carolina www.midatlantic-logging-biomass expo.com/

is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 13

Phone 315.284.4126 Faxand steer. Can pull loaded 2014 KOMATSU 450 315.849.2045 trailer. Cleaned, serviced and Only 1100 hours on this Website inspected. Tight and dry and machine, in excellent www.empirehyd.com Email ready for work. Located in conditi on.Under Pressure” “Precision info@empirehyd.com

Item ID 13937. Austin x703 LIEBHERR

2007 LIEBHERR A924C LOG HANDLER RUBBER TIRED LOG LOADER 13,000 hours. 40’ Reach with two section boom. 60” Log Grapple with continuous rotation. Fixed Cab Riser with cab guard protection. Front push blade. Tight and dry. Cleaned, Serviced, and Checked out for service. Can pull loaded trailer. 4-Wheel drive and steering. Top Quality machine. Would be great for log yard or mill work. Item ID 13476. Sam x702

Baltimore, MD. Item ID 13477. Sam x702

2011 LIEBHERR A924 RUBBER TIRED LOG HANDLER Liebherr 4 cylinder engine with great fuel economy. 11,230 hours. Fixed cab riser. Two section boom with 38’ reach. Cab protection. 4-Wheel drive and steer. Push blade. Can pull loaded trailer. Cleaned, serviced and inspected. Tight and dry and ready for work. Located in Baltimore, MD. Item ID 13478. Sam x702 LINK-BELT

1997 LINKBELT 3400 REBUILT PIERCE STROKE 2011 LIEBHERR A904 DELIMBER RUBBER TIRED LOG 36” Pads on 60% 13428 HANDLER Victory Ln. // PO Box 124 undercarriage. 5221 hours. Liebherr 4 cylinder engine with Adams Center, NY 13606 running condition. great fuel economy. 11,230 Good hours. Fixed cab riser. Two Owner just spent $30,000 on section boom with 38’ reach. upgrading delimber. Item ID 12992. Sam x702 Cab protection. 4-Wheel drive

MORBARK

1987 MORBARK 27 WCL NEEDS MOTOR Morbark 1000 Knuckle boom loader, 3 knife disc, Newer discharge chute, New banding around disc, Brakes and ‘16 Halverson H140 tires are also OK, Everything Skidsteer (DEMO) works well Newer clutch -Itemoutboard ID: JW-909632 with bearing, Had Contact: J Williams Cummins KTTA 750 HP engine (888) 401-6367 x701 --Ph: needs repower. Item ID 12443. Sam x702

1997 MORBARK MODEL 2400 CHIPPER Has a Cumins diesel engine and runs great. All ﬂuids and ﬁlters have been changed. Item ID 13429. Sam x702 1999 MORBARK 1400

‘13 KMC 2500 Track TUB GRINDER Loader w/Cab; Skidder 4200 hours; Very good condition. Located Item ID: 14078 in PA. Contact: Austin Item ID 13361. Sam x702 Ph: (888) 401-6367 x703 2006 MORBARK 6600 HORIZONTAL GRINDER off onto a conveyor. This is a very Approx. 6000 hours on this

well built processor. Item ID 13820. Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 403

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

well maintained machine. Has New Cat Dealer Rebuild 1000HP Engine at 5000 hours. 42” X 66-5/8” Hammermill; variable speed infeed system; Hammermill drive includes Barko all‘93 belts, sheaves,180B bushings & Item ID: 14077gauge panel shields. Engine Austinshut down &Contact: emergency Ph: (888) 401-6367 x703 system located in an antitheft console. Electronic rpm sensor & auto feed system. 430 Gallon fuel tank. 238 Gallon hydraulic oil tank. IQAN control system. Dust suppression system. Hyd operated debris containment door. 16 Function radio remote. Super package! ‘95 John Deere C6 Optional new knife skin Treewhich Farmer $20,000 is half price of new. Item ID: 13920 Item ID 12692. Contact: AustinSam x702 Ph: (888) 401-6367 x703 MORBARK 1200 TUB GRINDER Powered by a 3412 Cat engine, capacity!. Item ID 13421. Sam x702 600-hp. Tilt tub. Hours are BARKO unknown. Please call Daren at 1994702 Barko - Electric Ext. for160B more details. knuckleboom, 30' boom, Item ID 12919. Sam 75hp x702 motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

it includes two sets of Mcdonough pressure guides. Top Casting wheel

Selma, North Carolina www.midatlantic-logging-biomass expo.com/

is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 15

Phone 315.284.4126 Fax 1997 PRENTICE 210E WOLVERINE 315.849.2045 New 5.9 cummins engine, Website 1995 MORBARK turntable bearing and seal, fuel www.empirehyd.com WOLVERINE 3-WHEELED Email pump and battery. Joystick, “Precision Under Pressure” FELLER BUNCHER info@empirehyd.com

S/N 4073. Only 1000 hours on new JD 4 cylinder engine. Recently replaced turbo. 23.1 tires at 50%. 16” Rapid Buncher shear head. Machine is fast and in very good condition. Item ID 12531. Sam x702 PRENTICE

1988 PRENTICE 210B New battery and starter a year ago, new alternator less than 2 years ago. Continuous rotation grapple, has 3-53 detroit engine, lever controls, plumbed for bucksaw. Mounted on a 1978 GMC Brigadier with 6-71 detroit with a 10 speed. Runs everyday. Item ID 13703. Sam x702

Heat and A/C, boom repinned, cylinders repacked. Total hours at 12000. Bucksaw hookup. This loader is used to feed a chipper. Item ID 13795. Sam x702

1999 PRENTICE 210E Comes with a bucksaw. Levers, 11000 hours. Repacked all cylinders and valve body. This loader has only been used to cut up logs into 9’ lengths. Never used as a delimber loader. Item ID 13784. Sam x702

2014 PRENTICE 2384C LOADER PACKAGE with CSI 264 Ultra Delimber and Rotobec 4048 Grapple. Only 1050 hours! Mounted on trailer with hydraulic 1992 PRENTICE 210D LOADER stands. Excellent condition. 13428 conditi Victoryon, Ln. // Excellent veryPOtiBox ght 124 Contractor shutting down job. Adams Center, NY 13606 loader mounted on a 1989 Mack Item ID 13577. Sam x702 truck with very good tires. Item ID 13654. Sam x702 2432 2010 PRENTICE SKIDDER It has 30.5 tires al the way around

and has 6,000 hours on the machine. Item ID 13382. Sam x702 PRENTICE 310E Good loader for the money. Item ID 13762. Sam x702

‘16 Halverson PRENTICE 120C BOOMH140 TRUCK Great tires, new paint, & lights, with Skidsteer (DEMO) aItem 350 Cummins Engine 3 stage jake. ID: JW-909632 Item ID 13900. Austin x703 Contact: J Williams Ph: (888) 401-6367 x701 1994 PRENTICE 180D LOG LOADER 11,793 hours, Machine is in good condition, it has been sand blasted and painted, low pro tires 17.5. Item ID 12759. Sam x702 210 PRENTICE LOADER MOUNTED ON 2006 TRAILER Excellent condition. ItemKMC ID 13505. SamTrack x702 ‘13 2500

Skidder LATE 80’S PRENTICE 210 LOADER This is aID: late 80’s model, it had a Item 14078 new motor Austin installed 2 years ago Contact: with around 3,000 hours Ph: (888) 401-6367 x703on it, also comes with a circle saw. Item ID 13879. Austin x703 off onto a conveyor. This is a very

well built processor. Item ID 13820. Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

vans and produce 6 - 8 loads per

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

good. in good working order. 22in

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 403

50% or better. 475 hp Cummins

adjustable to single two way. Great

Well maintained. Item ID 13294.

Firewood Processor - This is a Rotary Dryers homemade processor with a 10’ Sand Dryers logGrain deck. Has a hydraulic grapple, Dryers Lumber chain andKilns kicker that all runs off Cement Kilns of a 4 cylinder Mercedes power Brick Kilns unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

(excellent condition.). Item ID

tach, oil pressure, water temp and

low hours. Control panel includes

but electronic option is available.

Value! PA. Item ID 12062. Sam x702

grapple, 5,000 original hours.

- Pumps recently redone. 400 hrs

Has Log Lift. Uses 4-way wedge

quality chips with patented ‘Cone’

motor, Rotobec continuous

with John Deere power unit with

day. Item ID 13882. Austin x703

condition. Easily produces high

knuckleboom, 30' boom, 75hp

automatice firewood processor 1995 Barko 775 B Feller Buncher Clean-Burn Design

drum design. Can easily load 42’

with 1700 hours, in very good

2014 B66TD ROTOCHOPPER ‘95 John Deere C6 This machine is still like new Tree Farmer with only 1300 hours on rotor Item ID:on 13920 and 1600 engine. This is a Contact: Austin track and dolly system, which Ph: (888) 401-6367 makes it easy to move.x703 Has a magnetic head roller, 48” rotor with 28 teeth and a 700hp C-18 Caterpillar power capacity!. Item ID 13421. Samunit. x702 This rotochopper sells for over BARKO $600,000.00 new. 1994 Barko 160B - Electric Item ID 13838. Sam x702

Innovative 13238. Chris x700

a Chomper Model 16 PDA

amp gauges. Cuts logs up to 16”. Manufacturing a full line of biomass ﬁred One chain conveyer, 8 way splitter, on combustion systems backed with ﬁfty years of owner and comes with all 20,000lb goose neck trailer. Item ID manuals and receipts. Purchased innovative clean-burn design. Diverse in every way with multi-fuel blending capability. Hurst 13916. Austin x703 new for $32,500. Item ID 13865. stokers utilize hundreds of common and Sam x702 Best Value Portable Log Splitter abundant solid biomass fuels. - Small manufacturer in PA has Large or small scale, project LOGGING EQUIPMENT management is eased with the made the best valued log splitter. BANDIT impressively short installation time Handles logs up to 32”. Uses 1999 Bandit 1900 Tracked Disc required with prefabricated 13HP Honda motor. Manual start Chipper - Cat Under Carriage at modular components.

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

1998 PRENTICE 210E It has the 600 turbo charged cummins engine, control valves have been redone, ac/ heater work, it also has slasher saw hook ups. Dry machine, ‘93 Barko 180B working daily. ItemID ID: 14077Austin x703 Item 13913. Contact: Austin ROTOCHOPPER Ph: (888) 401-6367 x703 2011 MC266T ROTOCHOPPER This is a great chipper with only 3600 hours. It has a 500hp C15 Caterpillar power unit. Comes with spare bolts, teeth, screens and bearings. Item ID 13837. Sam x702

Diesel. 7500 Hours. One owner. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

on injection pump. always started kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

YEARS control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

UNIVERSAL REFINER Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

REscanaba,AMichigan T

feed deck 20 foot out feed deck with 44 inch wheels, and all the

it includes two sets of Mcdonough pressure guides. Top Casting wheel

Selma, North Carolina www.midatlantic-logging-biomass expo.com/

is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

that go up and down, with airbags,

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

bells and whistles, its a production

machine, with air strain conveyers

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

ADVERTISING SALES

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

10 hours on this machine since it

has been rebuilt, it has a 24foot in

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours

on the mill, electronic computer Set THE PAUL BUNYAN SHOW or 2" band, 22ft. track durable Fri,The R-MAG wood1/2" waste grinder 6 Oct - Sun, 8 is Octa portableworks,1

DESIGN DIRECTOR

Heningeris unbelievably simple, TheDonna H.A.W.G. EQUIPMENT and fast, yetREPS it will grind almost anything and Sam Wall make a ﬁ nished (888) 401-6367 ext. 702 product in just one pass... sam@lumbermens.co even pulp chips. Is ideal for grinding: Asphalt, Austin Shingles, Woods Construction Waste, Green Waste, (888) 401-6367 ext. 703 Stumps, Diﬃcult/Dirty Material, Tropical austin@lumbermens.co Waste (Palm & Palmetto), etc. MAILING ADDRESS

Cambridge, Ohioused that can be www.ohioforest.org

Catareas 3406 140KW Genset, 12,400 in many of recycling. hours ready to run. Item ID 13434. They can easily and safely grind lawn clippings, Sam x702 leaves, land clearing, constructi on/demolition CARRIAGES & DRIVES waste logging slash, stumps, log yard waste, 2010 Cardinal HD Carriage railroad ties, storm waste, tropical (palm and Carriages (Sawmill) - Cardinal palmetto) waste etc. Carriage line it includes carriage

** INFO LINK**

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Kilgore Saw ............................. 22

Universal Refiner ................... 23

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

with onboard log turners, carriage

800-277-8068 AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

Corley Mfg .............................. 32

drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC REFINER

Multitek ................................... 12

UNIVERSAL

Machinery ...................... 3 The Paul Bunyan Show ......... 39 TheHahn BEST Industrial Grinders/Shredders Hurst Boiler ............................. 14 Thomas Industrial Controls..... 10 on the Planet for over 35 years. Iron Bull ................................... 21 Union Grove Saw & Knife.. 2, 37

P . O . B O X 1Lignomat 5 1 ................................. � M O24NWoodMizer T E S................................ A N O , l W www.BakerProducts.net A 9 8I S73.663.7711 563 800.S48.6914

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

❘

 (888) 401-MENS L!

NO. 17

Phone 315.284.4126 Faxmonths ago, has about 13,500 2000 TIGERCAT 845B 315.849.2045 it has 8900 hrs. the Hydraulic hours, needs a couple of Website Pump haIGERCATs 2000 hrs on windows. Tires at 50%. www.empirehyd.com it.“Precision We replaced the saw pumpEmail Item ID 13667. Sam x702 Under Pressure” info@empirehyd.com

last summer. Ready to go! Item ID 13619. Sam x702

2000 TIGERCAT 845B This 845B has 14000 frame hours with 5000 hours on an 8.3 cummins engine. New sprockets, bottom and top rollers, rails, idlers, 36” tracks, seat and all new A/C parts. Track adjusters, and all cylinders on head have been repacked. Comes with a 22” hotsaw with 45 degree rotate. This is a very clean cutter, owner just wants to update. Item ID 13939. Sam x702

2004 TIGERCAT 630C New 35.5’s on rear and 25% on front, comes with 2 spares. Engine has 4500 hours, with 12000 machine hours. Two new wiring harness. Item ID 13749. Sam x702 2004 TIGERCAT 845B with Waratah 622 Processor. New screen, wheels, sprockets and wheel motor. Owner used it for a month before parking it. 5,000 hrs. on 8.1 cummins engine, and 6990 total hrs. Item ID 13625. Sam x702

2004 TIGERCAT 240B 2005 TIGERCAT 230B KNUCKLEBOOM New 5.9 cummins crate engine Tight, and dry machine, with with 2500 hours, turntable good, 16,000 hours on the machine, new 243 CSI delimber, good tires, motor put in around 10,000 hours, 13428 Ln. //hours. PO Box 124 brakes, andVictory lights. 7500 CTR Delimber trailer included, and Adams Center, NY 13606 reversible CSI Bucksaw, will sell Item ID 13666. Sam x702 with, or without Bucksaw. 2004 TIGERCAT 620C Item ID 13911. Austin x703 Single arch, new engine 2

2005 TIGERCAT 822 TRACKED FELLER BUNCHER Good running condition. Tigercat 22” Hot Saw with 40 degree tilt. New center bearing and swing motor. Undercarriage at 50% or ‘16er.Halverson bett Very clean.H140 High hours, but well(DEMO) cared for by Skidsteer single owner of land clearing Item ID: JW-909632 business. en idled for hours. Contact:Oft J Williams Total hours401-6367 19,500. x701 Ph: (888) Item ID 13575. Sam x702 2006 TIGERCAT 630C GRAPPLE SKIDDER Very good running condition. Dual Arch grapple. New 35.5 tires. Only 4500 hours. Winch. Compare to new 630 at $310,000! Item ID 13576. Sam x702

‘13 KMC 2500 Track 2007 TIGERCAT 250B Skidder W/WARATAH PROCESSOR

2007 Item Tigercat ID: 14078250B Crawler with 2005 Waratah 622B Contact: Austin Processing Head. 9500 hours. Ph: (888) 401-6367 x703 The 622B Waratah head is in great shape. 3 new wheel off onto aon conveyor. This is motors the head alla very new

well built processor. Item ID 13820. Sam x702

Firewood Processor - This is a Chomper Model 16 PDA

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 403

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

3-5

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

pins and bushings. Head has been totally rebuilt less than 500 hrs ago. The swing motor on the carrier has just been rebuilt and a new Hydraulic pump. U/C at 50%. Currently ‘93 Barko 180B Runs processing 600 tons/day. ItemOwner ID: 14077 great. shutting down. Contact: AustinSam x702 Item ID 13360. Ph: (888) 401-6367 x703 2009 TIGERCAT 620C This skidder only has 10575 hours with a cummins engine and ﬁre suppression system. Tires are 30.5 X 32 with 20% front, 1 new rear and 1 rear at 50%, 4 tire chains at 40%. Dual arch and no winch, extra fuel tank and tight center pins. ‘95 John Deere C6 Excellent skidder ready to start Treewood. Farmer dragging Item ID Item ID:13928. 13920Sam x702 Contact: Austin 2009 TIGERCAT H250 Ph: (888) 401-6367 x703 TRACKED HARVESTER Tigercat Model 575 processing head. 10,880 hours. U/C at capacity!. Item ID 13421. Sam x702 60%. Everything runs well and has been veryBARKO well maintained. 1994 Barko 160B - Electric Item ID 13592. Sam x702 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass expo.com/

** INFO LINK**

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 19

Phone 315.284.4126 Fax 2010 TIGERCAT 480 2012 TIGERCAT 724E TRACKED MULCHER 315.849.2045 FELLER BUNCHER Website 3410 hours. $32,000 in recent 2950hrs. 30.5 tires. Like new www.empirehyd.com upgrades and Pressure” repairs. FeconEmailmachine. One owner. Very well “Precision Under info@empirehyd.com

BH250 Mulching Head. Item ID 13502. Sam x702

maintained. Item ID 13528. Sam x702

2011 TIGERCAT 620D This is a low hour skidder with only 5500 hours on a cummins engine and a ﬁre suppression system. Comes mounted on 35.5 tires at 50% back and 40% front and good chains on all 4 tires. Has the bigger 630 axles and no winch. Center pins are tight and extra fuel tank. Item ID 13929. Sam x702

2014 630 D TIGERCAT 1300hrs like new inside 35 by 15, CB, light package, large grapple and wench. Item ID 13408. Sam x702 2014 TIGERCAT 630D GRAPPLE SKIDDER Dual Arch Grapple. Just 1990 hours. 3 year/5000 hour PT warranty. 35.5 tires with dualing rings at 60%. Wide blade. Winch. Item ID 13526. Sam x702

2011 TIGERCAT 845C Just over 4000 hours. 5400 head and 340 degree 2015 TIGERCAT 234B LOADER rotation, undercarriage at Model 234B. Only 300 hours 70%. Mercedes engine and on this machine, this machine fire suppression system. is extremely fuel eﬃcient, and 13428 // for PO Box This is a Victory great Ln. buy for 124 very quiet. In the cab, it has Equipment Adams Center, NY 13606 such a super clean track heated and cooled seats. runs Digest cutter. like new. Item ID 13927. Sam x702 Item ID 13880. Austin x703

LUMBERMEN’S

99 TIGERCAT 240B LOADER This loader is a package deal, portable, and mounted on a dump truck from the eighties. Also this loader can be mounted back on its trailer with delimber. It ‘16 4509 Halverson has hrs on aH140 reman Cummins engine. Skidsteer (DEMO) ItemID: ID JW-909632 13455. Sam x702 Item

Contact: J Williams TIGERCAT 230B Ph: (888) 401-6367 x701 This Tigercat has a Cummins 5.9 liter 360 Continuous roatation on the grapple w/ a 30’ reach on the boom. Joystick Controls, triple pump hydraulics, Stick and swing function w/ a fully enclosed Cab. Machine is located in Florida. Item ID 13643. Chris x700

motor, Rotobec continuous

Firewood Processor - This is

(excellent condition.). Item ID

‘05 Gehl CTL 70 PROTECT Them ALL ® Wrap With Pro-Tec-To ‘83 John Deere automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

Hydraulic Lines – Fuel Lines One owner and comes with all chain conveyer, 8 way Hoses splitter, on – Air Item ID: 14073 20,000lb goose neck trailer. Item ID manuals and Contact: AustinElectric Wire Bundles – Control Cablesreceipts. Purchased Ph: (888) 401-6367 x703

13916. Austin x703

Best Value Portable Log Splitter

® with 1700 hours, in very good -® Small manufacturer in PA has PRO-TEC-TO WRAP & PRO-TEC-TO

new for $32,500. Item ID 13865. Sam x702

LOGGING EQUIPMENT SLEEVE condition. Easily produces high made the best valued log splitter. BANDIT CUT YOUR DOWNTIME AND YOUR COSTS! quality chips with patented ‘Cone’

Handles logs up to 32”. Uses Bandit 1900 Tracked Disc Protection Against Pinching, Crushing, Rubbing 1999 & Abrasion 13HP Honda motor. Manual start Chipper - Cat Under Carriage at – EVEN UV RAYS! Both are Impervious to Oils and Solvents.

drum design. Can easily load 42’ vans and produce 6 - 8 loads per

but electronic option is available.

day. Item Provides ID 13882. Maximum Austin x703Protection Hasfor LogLogging, Lift. Uses 4-way wedge

EDGERS & GANGS adjustable to single Construction & Stationary Applications Like: two way. Great

Brewco Saws - Two Brewco Value! ItemMasts ID 12062. Sam x702 • Debarker Buggies •Saws Pantograph Arms PA. • Forklift

50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

For The Distributor WellNearest maintained. You,Item CallID 13294. Sam x702

800-355-1250

• Wheel Loaders • Skidder • Knuckleboom in excellent condition. Runs great. Grapples Firewood ProcessorLoaders - This is a 2004 Bandit Beast orModel Visit 4680 • Fellerbuncher Heads • Stroke Item ID 13644. Sam x702Heads • Harvesting homemade processor with a 10’www.pro-tec-toproducts.com 3412 Caterpillar Diesel engine Delimbers • Dozer Blades FIREWOOD PROCESSORS log deck. Has a hydraulic grapple, with 850 HP. 5300 hrs. Mill in

Anywhere Hoses & Wires Are – Pro-Tec-To® Products chain and kicker that all runs off Offers Maximum Protection, Lower Costs, Reduced - It has a 353 Detroit diesel, 40 Downtime and Less Spills! of a 4 cylinder Mercedes power 2010 Shop Built Wood Processor

inch insert tooth circle saw, 30 foot  Issue 364 403

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Item ID:TIGERCAT 14077 630C 2006 Contact: Austin GRAPPLE SKIDDER Ph: (888) 401-6367 x703 on. Very good running conditi Dual Arch grapple. New 35.5 tires. Only 4500 hours. Winch. Compare to new 630 at $310,000! Item ID 13576. Sam x702

well built processor. Item ID 13820.

a Chomper Model 16 PDA

4850

‘93 Barko 180B

2014 630 D TIGERCAT 1300hrs like new inside 35 by 15, CB, light package, ‘95 John Deere C6 large grapple and wench. Tree Item ID Farmer 13408. Sam x702 Item ID: 13920 2014 TIGERCAT Contact: Austin 630D ‘13 KMC 2500 Track SKIDDER TIGERCAT 250T Ph:GRAPPLE (888) 401-6367 x703 Skidder Dual Arch Grapple. Just 1990 TRACK LOG LOADER LUMBERMEN’S Equipment Digest 3 year/5000 hour PT Cummins 8.3 engine and hours. Item ID: 14078 PO Box 1146 warranty. 35.5 ti res with pumps Contact:have Austinbeen done Columbia,capacity!. TN 38402-1146 Item ID 13421. Sam x702 dualing rings at 60%. Wide probably hours Fax Ph: (888)8,000-9,000 401-6367 x703 1-800-477-7606 (931) 388-3564 www.lumbermenonline.com blade. Winch.BARKO ago. It has 45,000 hours. 1994 Barko 160B - Electric Item ID 13526. Sam x702 This machine has never run off onto conveyor.ItThis is abeen very knuckleboom, 30' boom, 75hp in the awoods. has Sam x702

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

in a yard the whole time. Tracks are around 50% and this machine has been extremely well taken care of! Item ID 13608. Chris x700

good condition. Just finished 10 OEM’s, Repair Facilities & Distributor Inquires Welcome Acre clearing job, ready to work! Remote control. Big production

 List  seLL  exchange  buy  save

grapple, 5,000 original hours. 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

1990 Bell Super T - This Bell has

a brand new Duetz engine. Lever

control, 33” bar, pump and tranny ❘

 LumbermensCO.com

TIMBCO

1996 TIMBCO T425B FB w/2008 Rotosaw Intermittent Saw Head. Machine has 540 degree non continuous rotation on upper. 9900 hours. New Undercarriage. New glass in cab. The Very Tree good running conditithat on. Rotosaw Startedhas 360 degree rotation. Cummins it All! 6CT8.3 engine with 215 HP. Machine great. Working Since 1986,runs Lumbermens has in select hardwood today. published a monthly circular Item ID 13548.loggers, Sam x702 reaching sawmills,

pallet makers, recyclers and industrial woodworking 1997 TIMBCO 820C plants CLAM worldwide. BUNK FORWARDER

PUBLISHER “4000” original hours. 20.3 x 25 rubberWoods at 70%.Publishing Hand sanded and painted, brand new computer ADVERTISING SALES and ScorpionMorris controls, added speed Woods (888)2401-6367 ext. 704 control. sets of tracks , all new morris@lumbermens.co Lexan. Located in Alberta, Canada. Customer will pay shipping to MARKETING DIRECTOR John Williams closest US entry point. (888)ID 401-6367 Item 13532. ext. Sam701 x702 j@lumbermens.co

1998DESIGN TIMBERLINE STROKE DIRECTOR Donna Heninger DELIMBER 8400 EQUIPMENT hours. U/C at 60%. Will REPS crank andSam run.Wall Owner retired. (888) 401-6367 ext. 702 sam@lumbermens.co

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS Machine idle for past year. New JD 6 cylinder engine in running machine. Item ID 13599. Sam x702 has 7000 FIELD hours.DAYS U/C Item 13549. Sam x702 See ID pictures, prices, and NY STATE2011 WOODSMEN'S 65%. -Extensively rebuilt Fri, 18 at August Sun, 20 August Location of all equipment at 1999 TIMBCO 820D CLAM with new New swing motor, new 2000 TIMBCO 445D Boonville, York www.LumberMB\ISmagazine.com BUNK FORWARDER charge pump, new high Recent engine and pump last www.starwebhosting.net/woodsmen/ 10,300 hours. New engine speed saw motor, new main less than 500 hours ago. Can hydraulic newEXPO oil SOUTHWEST FOREST pump, PRODUCTS accept bunks, but none with main cylinders Fri, 25cooler, August all - Sat, 26 August repacked. machine. Owner has two sets Hot Springs, Package Arkansasincludes of tracks like new he will add www.arkloggers.com extra final drive, extra computer screen, and extra for additional $20,000. ANNUAL GREAT LAKES Item ID 13494. Sam x70272NDswing motor. Has new jet LOGGINGfit & HEAVY EXPO system.EQUIPMENT This machine is Thurs, 7 Sept Sat, 9 Sept loaded...has pro-heat system 1999 TIMBCO TF-820D Escanaba, Michiganstart. Has for cold weather FORWARDER 11k hrs on machine, new fire suppression system. All MID-ATLANTIC LOGGING & BIOMASS Cummins engine at around 8k working! Hydraulic Oil just 15 Septchanged - Sat, 16 Sept hrs and has fresh drive pump &Fri, totally (100 new North imp. pump. 28L 26 tires some Selma, gallons) withCarolina new filters. www.midatlantic-logging-biomass great, some decent. Machine is Item ID 13598. Sam x702 MID-ATLANTIC expo.com/ LOGGING BIOMASS EXPO ready to& work, but could use a little ﬁxing here and there. the 2000 TIMBCO 425D W/33” WOOD EXPO bucket is sloppy could standKENTUCKY BAR SAW HEAD Fri, 15 Sept Sat, 16 to be pinned and bushed. No 40 degree tilt on Sept head. 540 Lexington, Kentucky major issues! degree rotati on on upper body. http://www.kfia.org/ Item ID 13212. Sam x702 One year old Cummins 6CT8.3 KentuckyWoodExpo.aspx engine. Resealed pumps. 2000 TIMBCO 415D Rebuilt valve bank. 90% PAUL BUNYAN SHOW w/2005 FABTEK 4-ROLLER THEundercarriage. Can accept hot Fri, 6 Oct Sun, 8 Oct system. PROCESSOR saw. Fire suppression Cambridge, 21,000 hours on meter. Auxiliary oil Ohio cooler. Good www.ohioforest.org

has been rebuilt, it has a 24foot in

05 TIMBERPRO 830TF FORWARDER with 44 inch wheels, and allconthe 6580 hours. Very good bells and whistles, its a production dition. Tracks for all bogies. 710/45-26 tires at 70%. Inmachine, with air strain conveyers cludes bolsters and back rest. that go up and down, with airbags, Comes with 36” grapple with it includes two sets of Mcdonough grapple saw option. Set up pressure guides. hydraulics Top Casting acwheel with harvester is supported on both sides. This cording to owner. ID 13161. Sam x702 isItem an extremely accurate machine feed deck 20 foot out feed deck

in ve1y good condition, Cuts 130

2006 TIMBCO/VALMET 445EXL W/BAR SAW Item IDhours. 13876. Austin 9200 Onex703 owner S & W 12533” BandBar MillSaw with Head machine. with 360 generator degree - Low rotatihours on. Caterpillar Tracks at 60%. Runs goodSet on the mill, electronic computer and machine is tight. Reman works,1 1/2" or 2" band, 22ft. track Cummins 6BT8.3 one year old. Cat 3406 12,400 Item ID140KW 13556.Genset, Sam x702 feet a minute also has CLT presses.

hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

winter. New sprockets and rollBANDMILLS & HEADSAWS ers. 22” quadco hot saw. OwnBand Resaw - Roughly erDanckaert retired. Located in Montana. IDon 13790. Sam x702 10Item hours this machine since it

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 21

Ite Co Ph

‘14 Lo

Phone 315.284.4126 Fax 1979 TIMBERJACK 240 TIMBER KING 315.849.2045 GRAPPLE SKIDDER W/ WINCH 2005 TIMBERKING 560 DS Website Excellent running condition. www.empirehyd.com Same as Prentice 2384, 9500Email New brakes, 23.1x26 tires “Precision Under Pressure” hours on perkins engineinfo@empirehyd.com with

new injector pump and ECM by Cat. CSI delimber, good A/C, tires, and lights. Item ID 13636. Sam x702

2006 711 TIMBERKING With 6,716 hours. with 7,000 logmax processing head& ﬁre suppression system. Under carriage is real good, Runs and works Great! Item ID 13737. Sam x702 TIMBERJACK 1969 TIMBERJACK 225D SKIDDER ring chains front ice chains rear, very good condition! Item ID 13215. Sam x702

Holds air. Best sounding 453 Detroit out there. Starts in Very cold weather on ﬁrst try. Item ID 13560. Sam x702

1982 TIMBERJACK 240A Tight, Clean Skidder! Brand New Crate Motor 453 has roughly 500 hrs on it,winch rebuilt, starter rebuilt, master cylinder rebuilt, new batteries, battery wires 4 brand new ice chains, 6 new slides n tear drops, no leaks n all the pins are super tight. New belts n some new hoses. Item ID 13557. Sam x702

1989 TIMBERJACK 230A It has a 4bt cummins engine, 4 speed manual shift, and only 3,411 original hours, comes 1968 230 TIMBERJACK with 4 new ﬁrestone 23.1SKIDDER 26 tires. The transfer case & 13428 Victory Ln. // POnew Box 124 New 353 Detroit engine, winch have all new clutches, Center,Machine NY 13606 tranny.Adams Runs great! is seals, and bearings. New tight. She’s a workhorse! brakes have been installed as Item ID 13470. Sam x702 well as new master cylinders.

Very clean and tight machine. Item ID 13885. Austin x703 1993 TIMBERJACK 1010 FORWARDER 16,000 hours. Good running condition. 6 wheeled. Tracks for rear ‘16 Halverson bogies and chains for frontH140 tires. Item ID 13446. Sam x702 Skidsteer (DEMO) Item ID: JW-909632 1993 TIMBERJACK Contact: J Williams 380B PG HIGHLIFT TREE TRIMMER Ph: (888) 401-6367 x701 s/n CM4478, 5,152 hours, Delivered New in 1995, Cab with A/C, 5 blades, 75 reach, Branton Winch, Push Blade, 4X4, Firestone 67X34.00/26 tires @ 90%, Counter Weight, 6 cylinder Cummins Diesel Engine. FOB:Okeechobee, FL. Item ID 13090. Sam x702

1994 TIMBERJACK 450C ‘13 KMC 2500 Track Grapple with winch, new transSkidder missiion and hydraulic pumps. ItemID: ID 14078 13826. Sam x702 Item Contact: Austin 1997 TIMBERJACK 240D Ph: (888) 401-6367 x703 This skidder comes with 23.1 X 26 tires at 95% rear and off onto a conveyor. This is a very

well built processor. Item ID 13820. Sam x702

30% front. New brake bands in winch and good cable. Engine was rebuilt 2 years ago. Good strong running machine. Item ID 13917. Sam x702

‘93 Barko 180B360 1998 TIMBERJACK

ItemCABLE ID: 14077 SKIDDER Contact: Austin skidder with This is an excellent Ph: 6650 (888) hours. 401-6367 x703 only New center section. Cummins engine with electronic automatic transmission. Item ID 13777. Sam x702 1998 TIMBERJACK 460 Excellent Condition. Runs great. WOODS READY. Item ID 13545. Sam x702

‘95 John Deere C6 Tree Farmer 460C 2001 TIMBERJACK

This is ID: a 13920 single arch with Item winch with only 6800 original Contact: Austin hours. This is a very low hour Ph: (888) 401-6367 x703 machine. Cummins 5.9 engine has a crack in it. It can be loaded onto a lowboy. This capacity!. Item ID 13421. Sam x702 would be great starter skidder BARKO with a new engine. 1994 160B - Electric ItemBarko ID 13829. Sam x702 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

ROW ELECTRICAL EQUIPMENT, INC. Firewood Processor - This is

(excellent condition.). Item ID

a Chomper Model 16 PDA

‘05 Gehl CTL 70

13238. Chris x700

automatice firewood processor

1995 Barko 775 B Feller Buncher

YOUR SOURCE FOR USED, RECONDITIONED:

Item ID: JW-986495 • Squirrel Cage Motors Contact: J Williams • Gear Motors Ph: (888) 401-6367Motors x701 • Wound-Rotor

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

• Synchronous Motors • DC Motors chain conveyer, 8 way splitter, on

• • • • •

John -Deere unit with - Pumps recently redone. 400 hrs DCwith Motors Cranepower and Mill • Transformers, Three-Phase low hours.Speed Control panel includes on injection pump.Starters always started Adjustable Drives • Across/Line Magnetic Generators - AC and DC temp and • Reduced Voltage Starters tach, oil pressure, water good. in good working order. 22in Engine-Generator Sets • Safety Switches amp gauges. Cuts logs up to 16”. kohing head. head works great. Transformers, Single Phase • Phase Convertors One owner and comes with all Item ID 13185. Sam x702

20,000lb 1999 Barko 160D - new engine with Fax to: goose neck trailer. Item ID manuals and receipts. Purchased 800-248-4479 WWW.RoWELECTRiCAL.CoM P.O. Box 2812 • Toledo, Ohio 43606

13916. Austin x703 new for $32,500. Item ID 13865. 419-244-8887 rowelec@glasscity.net sales@rowelectrical.com Sam x702 Best Value Portable Log Splitter

approximately 1500 hours. Hour 419-248-4479

meter dont work. The last 2 owners

WE ANSWER THE PHONE 24 HOURS •LOGGING WE BUY USED ELECTRICAL - Small manufacturer in PA has EQUIPMENT have only used it to load trucks or condition. Easily produces high made the best valued log splitter. BANDIT as a backup as needed. Has a CTR with 1700 hours, in very good

quality chips with patented ‘Cone’

Handles logs up to 32”. Uses

BANDSAW

drum design. Can easily load 42’

BLADES EDGERS & GANGS

vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

BellSaws Ultra on Saws Brewco - TwoTBrewco

Tracks in excellent condition. Runs great. Item ID: 14023

Item ID 13644.Sam Sam x702 Contact:

Ph: (888) 401-6367 x702 FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

with winch, direct drive. Comes

- It has6000 a 353hour Detroit diesel,warranty. 40 with extended Hasinsert only 2600 inch toothhours. circle Has saw,new 30 foot 30.5 X 32 26 ply on rear and 70%

1999 Bandit 1900 Tracked Disc All Sizes Available!

13HP Honda motor. Manual start

Chipper - Cat Under Carriage at

TOP PERFORMING, economical blades for all primary &

wood processing. Welded to your lengths! but electronic option secondary is available. 50% or better. 475 hp Cummins We also offer expert sharpening services, plus...

Has Log Lift. Uses 4-way Diesel. Gang •wedge Edger • Scragg • Trim •7500 Split Hours. • Strob One owner. about any Custom Saws you need adjustable to single two....and way.justGreat Well maintained. to keep you cutting longer... Value! PA. Item ID 12062. for Sam x702 Sam less. Ask about FREEx702 Shipping!

‘16 Halverson H140 Skidsteer

Firewood Processor - This is a Item ID: JW-192810 Contact: J Williams

homemade processor with a 10’ Ph: (888) 401-6367 x701

log deck. Has a hydraulic grapple, chain and kicker that all runs off

does great job in hardwood. Priced

Item ID 13294.

‘05 CAT TK560 Item ID: 14004

2004 Bandit Sam Beast Model 4680 Contact: Ph: Caterpillar (888) 401-6367 x702 3412 Diesel engine

with 850 HP. 5300 hrs. Mill in

1977 (est) FMC 220CA Tracked

good condition. Just finished 10

Skidder w/ESCO Swing Boom

Acre clearing job, ready condition. to work! Grapple - Good running Call Marvin Miller for a quote JohnHas Deere 20chain hole Sweda wheels Front blade. Detroit 6V53 engine. Remote control. Big production unit. a 4’ saw that kicks 231-924-5953 (fax) 231-924-6166 / 11606 Brickyard Road • Holton, MI 49425 ©2019 Wood-Mizer LLC - These 50’s are mounted on hard No winch....they cannot fit with of 4 cylinder power toasell!. Item IDMercedes 12206. Sam x702

on front. Still a new skidder and to find 20 hole John Deere sweda swing boom grapple. Military style  Issue 364 1986 ❘ 403 Lumbermens™  since  List  seLL  exchange  buy  save priced to sell. Item ID 13696. Sam x702

rims. Still 50% tread left on these tires. 4 available. Item ID 13852.

tracks at 70%. Item ID 13227. Sam x702

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

Sanborn Scragg with low at hours at 3,500. 5.9 Mill

CUMMINS continuous grapple. Item ID: 14050 Contact: Austin Woods Runs Great!. Item ID 13740. Sam (888) 401-6367 Ext. 606 x702

BELL

13910. Austin x703

1990 Bell Super T - This Bell has

Franklin 170 Skidder - This would

a abrand Duetz engine. be great new starter skidder. It is Lever

a control, single arch winch.and Runs 33”with bar, pump tranny good and pulls good. Detroit 453 turbo and 3 speed power shift

❘

 LumbermensCO.com

transmission. Good center section. There are a few leaks, but nothing

2005 TIMBERJACK 460D Same thing as a John Deere 648GIII. Around 12000 Hours with new engine, dual arch, comes with 77 X 44.00 X 32 tires. 3 at 60% and 1 new one. Excellent skidder. Item ID 13709. Sam x702

The Tree 608B 2005 TIMBERJACK that Started This cutter has 10800 frame hours with aitnew All!undercarriage with less than a 1000 hours, Since 36” 1986, pads. Lumbermens It does havehas some published a monthly circular small leaks. Owner is going reaching sawmills, loggers, back to rubber tired cutters pallet makers, recyclers and because woodworking his job has changed. industrial plants Item ID 13898. Sam x702 worldwide. PUBLISHER

TIMBERJACK 240 Woods Publishing

In excellent condition! Well ADVERTISING maintained with 453SALES detroit. Lots Morris Woods of new parts. (888) 401-6367 ext. 704 Item ID 13785. Sam x702 morris@lumbermens.co

MARKETING 380 DIRECTOR TIMBERJACK SKIDDER John Williams Tight (888)machine. 401-6367 Runs ext. 701great. Low Hrs. One owner. j@lumbermens.co Item ID 13468. Sam x702 DESIGN DIRECTOR Donna Heninger

TIMBERJACK 460 EQUIPMENT REPS This machine is an excellent Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS condition. Running daily! 792888. Open cab. Detroit overhauled engine. Machine Item ID 13860. Sam x702 Simple FIELD but DAYS hard close 13,000. Engine Seetopictures, prices,only and NY STATEengine. WOODSMEN'S clean 400 to 500 hours. Fri, 18 working August -machine. Sun, 20 Very August Location of all equipment at ‘69 207 TIMBERJACK CABLE Boonville, for its’ age.New HardYork to ﬁnd. Item ID 13944. Austin x703 www.LumberMB\ISmagazine.com Item ID 13057. Sam x702 SKIDDER www.starwebhosting.net/woodsmen/ This Machine has a Brand new 4 cyl Perkins SOUTHWEST Engine, 1996 TIMBERJACK FOREST PRODUCTS230 EXPO Major Overhaul out of frame. Fri, 25 AugustFORWARDER - Sat, 26 August 15,000 hours. Good running Transmission has been Hot Springs, Arkansas condition. Working today. completely overhauled out www.arkloggers.com of frame. Reverse box also Serco Loader. Dry and still runs ANNUAL GREAT LAKES overhauled out of frame. Has72ND a strong. &Item HEAVY EQUIPMENT EXPO ID 12943. Sam x702 new Injector pump and LOGGING all new Thurs, 7 Sept Sat, 9 Sept injectors. 25% on tires on it. Escanaba, Michigan 240E Item ID 13283. Chris x700 1980 TIMBERJACK CABLE SKIDDER MID-ATLANTIC & tiBIOMASS ‘88 450B TIMBERJACK Has theLOGGING big 23.1x26 res (60%) 15 Sept - Sat, Sept on all Put new centerpins in 8Fri, with brand new16 chains North 4-53, Carolina months ago, it has a new Selma, 4. Detroit Gearmatic www.midatlantic-logging-biomass eslking beams & new radiator. 119 winch with 10 chokers. MID-ATLANTIC expo.com/ LOGGING & BIOMASS Goo winch, 100”EXPO Esco grapple, 4 speed manual transmission. all new drive lines, excellent Professionally made grapple 6 cyl cummins motor, good KENTUCKY on front WOOD blade. EXPO Just put a Fri, 15 Sept Sat, 16 Sept brakes. It’s skidding 25-30 Brand new Hercules Winch on. Lexington, Kentucky loads a week on smaller jobs. This machine starts, runs and http://www.kfia.org/ Item ID 13327. Chris x700 operates like new. You won’t KentuckyWoodExpo.aspx ﬁnd one in better shape. Item ID 13542. Chris x700 1979 TIMBERJACK 230 THE PAUL BUNYAN SHOW FORWARDER 6 Oct - Sun,240A 8 Oct Good running forwarder with Fri, TIMBERJACK SKIDDER Cambridge, Ohio 80% rubber. Serial Number: 1986, 23.1 tires. Recently www.ohioforest.org

TIMBERJACK 380B BANDMILLS & SKIDDER HEADSAWS DOUBLE ARCH Danckaert Band - Roughly 5.9 cummings withResaw 4 speed power shift transmission. New gauges 10 hours on this machine since it onhasthe dash so ithours unsure.in been rebuilt, has a 24foot New LED lights all around. Motor feed deck 20 foot out feed deck has rotary injection pump. Winch with inch wheels, all the is good.44Recently cameand oﬀ the job bells and whistles, its a production and is ﬁeld ready. Item ID 13942. x703 machine, with airAusti strainnconveyers

that go up and down, with airbags,

TIMBERJACK 380B SKIDDER it includes two sets of Mcdonough Single arch skidder with a new pressure guides. Top Casting wheel 5.9 cummings motor, less than is supported on both sides. This 200 hours. Rebuilt 4 speed power shift accurate transmission. is an extremely machine Good center pins. Winch in ve1y good condition, Cutshas 130 new brakes, good grapple. feet a minute also has CLT presses. New inline bosch injection Item ID 13876.the Austin x703come pump, makes motor S & Wrear 125 ti Band with front alive. res Mill 60/70% tiCaterpillar res 20/30% Machine is ﬁhours eld generator - Low ready. set of ice chains for anSet on the1mill, electronic computer additional $1000. works,1 1/2" or 2" band, 22ft. track Item ID 13941. Austin x703 Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434. Sam x702

** INFO LINK**

CARRIAGES & DRIVES

Mark your calendar

2010 Cardinal HD Carriage

for the 2021

Carriages (Sawmill) - Cardinal

MID-SOUTH FORESTRY EQU PBMMfg EN.T............................... SHOW B I& 18 M&F Gauge ............................. 28

Carriage line it includes carriage with onboard log turners, carriage

InB.Starkville, MS H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

•

Baker ...................................... 5, 7 New Layout

Menominee Saw ..................... 29

sawyers cab, computer controls,

•

More Compact Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

•

Big Timber Aplenty

Brute Force Mfg. ..................... 31

Abundant Shade

Midwest Sharpening.............. 26

carriage knees, husk including

• •

Food Trucks

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

•

Corley Mfg .............................. 32 Contests

Multitek ................................... 12

•

Continuing Education CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

Opportunities The Lumberman's Exchange is CW Mill-ArmorHog .............. 17 published monthly by Woods CW Mill-Hogzilla ................... 15 Publishing, P.O. Box 1916, Columbia, TN 38402. All rights Dyna Products ........................ 35 reserved. All editorial/ advertorial submissions are used at the Empire Hydraulics ................... 8 discretion of the publisher and may be edited for purposes of clarity Great Lakes Mfg. .................... 34 For more information about the and space. Although all efforts have Mid-South Forestry Equipment Show Hahn Machinery ...................... 3 been made to ensure accuracy of or if you interested content submitted byare advertisers Hurst Boiler ............................. 14 inthe exhibitor information... and writers, Lumberman's Exchange, its principles and Iron Bull ................................... 21 associates, are notLog held liable On! for errors or omissions. Reproduction, Kilgore Saw ............................. 22 in whole or part, is prohibited with Midsouthforestr y.org Lignomat ................................. 24 out written consent. ©2017 Woods Publishing

Rotochopper............................ 40

- USED FORESTRY EQUIPMENT FOR SALE

❘

drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

Row Electric ............................ 20 Sawmill Exchange .................. 11 Select Sawmill ......................... 19 Smith Sawmill ........................... 4 The Paul Bunyan Show ......... 39 Thomas Industrial Controls..... 10 Union Grove Saw & Knife.. 2, 37 Universal Refiner ................... 23

www.BakerProducts.net 800.S48.6914 I S73.663.7711

WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

❘

 (888) 401-MENS L!

NO. 23

Phone: (888) 237-4195 ► Fax: (515) 598-7293 ► Email: adcopy@treetrader.com Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

SAFETY ALERT

Logger Struck by Jackstand‘93Crank Barko 180B “Precision Under Pressure”

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

BACKGROUND On a summer day in the Southeast, a logging company’s ‘set-out man’ was staging loaded trailers for drivers to pick up and return to the site after delivery. His work included coupling and decoupling log trailers to his assigned process that124 involved raising and lowering 13428 truck, Victory aLn. // PO Box Adams Center, NY 13606 the jackstand (landing gear) via a hand-crank winch.

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6

only been a part of this logging crew for a few Tree Farmer years. The individual consistently wore a hardhat Item ID: 13920 and complied with his company’s safety standards. Contact: Austin ‘13 KMC 2500 Track He was considered a safe, reliable, and hardworking Ph: (888) 401-6367 x703 Skidder employee. Item ID: 14078 Contact: Austin UNSAFE ACT x703 Ph: (888) 401-6367

capacity!. Item ID 13421. Sam x702

BARKOa loaded W hen the set-out man went to drop 1994 Barko 160B - Electric trailer for pickup and lower the jackstand, he had PERSONAL CHARACTERISTICS off onto a conveyor. This is a very knuckleboom, 30' boom, 75hp hand on the crank handle and used the other The set-out man was in his early 20s and had one well built processor. Item ID 13820. motor, Rotobec continuous Sam x702

grapple, 5,000 original hours.

a Chomper Model 16 PDA

13238. Chris x700

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 NEW Auto Saw Tensioner

with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’

Item ID: JW-986495 30+ Years Contact: J Williams Strong! Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin From x703 Price To Performance, Best Value Portable Log Splitter We’re inA PA Cord - Small manufacturer has Above Rest! made the best valuedThe log splitter.

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses  Firewood Processors: 8 Models  Firewood Cleaners 13HP Honda motor. Manual start  Firewood Conveyors: 12’, 20’ & 30’  Operator’s Cabs vans and produce 6 - 8 loads per but electronic option is available.  Firewood & Log Grapples  Free day. Item ID 13882. Austin x703 Has Log Lift. Uses DVD 4-way wedge

1999 Bandit 1900 Tracked Disc

Brewco Saws - Two Brewco Saws

Sam x702

drum design. Can easily load 42’

EDGERS & GANGS

in excellent condition. Runs great. Item ID 13644. Sam x702

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

Portable • DePenDablelog• deck. low Has Maintenance FIREWOOD PROCESSORS a hydraulic grapple, chain and kicker that all runs off 888-SPLITTER (888-775-4883)

2010 Shop Built Wood Processor

- It has a 353 Detroit diesel, 40• 2756 Kentucky of a 4 cylinder 319-986-5525 Local Ave, MtMercedes Pleasant, power IA

blockbuster-inc.com

inch insert tooth circle saw, 30 foot

unit. Has a 4’ chain saw that kicks

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. 2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

(excellent condition.). Item ID 1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

a brand new Duetz engine. Lever

 Lumbermens™  since 1986 ~ ❘The  403WWW.TREETRADER.COM List  Largest seLL  exchange  The buy  save ❘  Industry LumbermensCO.com 100Issue 364 World’s Website For Tree & Landscape

198 440

Item Con Ph: (

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS SAFETY ALERT See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at hand to remove the holding chain that would Boonville, RECOMMENDATIONS FOR CORRECTION: New York www.LumberMB\ISmagazine.com allow the jackstand to be lowered down into place. • Give your full attention to the job at hand and eliminate www.starwebhosting.net/woodsmen/ (When the chain is released from a hook or notch, distractions before starting. BANDMILLS & HEADSAWS SOUTHWEST FOREST PRODUCTS EXPO the weight of the truck on the stand puts the hand • Wear required PPE. Danckaert Band Resaw - Roughly Fri, 25 Augustthe - Sat, 26 August The Tree crank under a lot of tension.) When lowering the Hot • Always and ﬂatit 10 hours on thisraising machineon since Springs,perform Arkansasjackstand lowering that Started jackstand, the set-out man lost his grip on the www.arkloggers.com ground to avoid log trailer rollover. has been rebuilt, it has a 24foot in All!hand crank. handle ofitthe feed deck 20mechanisms foot out feed deck Make sure the LAKES winch and jackstand are 72ND• ANNUAL GREAT properly. EXPO with 44 inch wheels, and all the Since 1986, Lumbermens has LOGGING &working HEAVY EQUIPMENT published a monthly circular Thurs, 7 Sept - Sat, 9 Sept yourselfbells and whistles, its a production ACCIDENT • Always position perpendicular to the reaching sawmills, loggers, Escanaba, Michigan machine, with air strainso conveyers hand crank and away from the jackstand that he handle spun around several times, striking him pallet T makers, recyclers and that go up and down, with airbags, industrial woodworking plants if the crank slips from your grasp, the handle once in the mouth and another time on the head. MID-ATLANTIC LOGGING & BIOMASS worldwide. it includes two sets of Mcdonough Fri, 15will Septspin - Sat,without 16 Sept striking you, and the jackstand PUBLISHER pressure guides. Top Casting wheel Selma, North Carolina will fall freely without striking or crushing any INJURY Woods Publishing www.midatlantic-logging-biomass is supported on both sides. This MID-ATLANTIC part of your body. Do not grab the spinning F ortunately,SALES he was wearing a hard hat and ADVERTISING expo.com/ is an extremely accurate machine Morris Woods handle! received no injury from the second blow that in ve1y good condition, Cuts 130 (888) 401-6367 ext. 704 WOOD EXPO • Be sure your hands are clean and free of dust, struck him on the top of the head. His fellow crew KENTUCKY morris@lumbermens.co feet a minute also has CLT presses. Fri, 15oil, Septor - Sat, 16 Sept other lubricants to ensure the crank member assessed his injury and provided first aid. Lexington, MARKETING DIRECTOR Item ID 13876. Austin x703 Kentucky handle remains securely in your grasp. Wearing John Williams His upper lip had been cut and was bleeding, but http://www.kfia.org/ S & W 125 Band Mill with 401-6367 ext. 701 KentuckyWoodExpo.aspx non-slip gloves will provide additional grip and he (888) did not seek medical attention. He was back Caterpillar generator - Low hours j@lumbermens.co protection. on the job the next day with no loss of ability to on the mill, electronic computer Set DESIGN DIRECTOR THE PAUL BUNYAN SHOW • When in the raised position, always beband, sure22ft.the perform his usual work functions and no further Donna Heninger works,1 1/2" or 2" track Fri, 6 Oct - Sun, 8 Oct jackstand is securely fastened in place. injury issues. REPS Cat 3406 140KW Genset, 12,400 Cambridge, Ohio EQUIPMENT LOGGING & BIOMASS EXPO

www.ohioforest.org

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

hours ready to run. Item ID 13434. Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

CARRIAGES & DRIVES

IntegrIty • PrecIsIon • QualIty • Value MAILING ADDRESS

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27 See why we are your BeSt Source for bandsaw blades! morris@lumbermens.co

Metal Detector's Inc. .............. 30

cabinet with electronic drives for 84/85 John Deere carriage knees, husk including 440B/C 48" bottom saw and 36" top saw

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

Woodmaster AD SUBMISSIONS May be sent to

Brute Force Mfg. ..................... 31

POSTMASTER We offer the highest quality welds and our people use the Buck Equipment (AIM) ........ 36 Send address changes to: highest level integrity and precision to give you the best Lumberman's of Exchange Corleyship Mfg all .............................. P.O. Box 1916in the business—we bandsaw blades over the US. 32 Columbia, TN 38402 CRD Metalworks Satisfaction always guaranteed! .................... 25 The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with out written consent. ck Cheut Our Quality • Our O ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Midwest Sharpening.............. 26 Morbark ..................................... 9 Multitek ................................... 12

Wood-Mizer LT40

Piper's Saw Shop.................... 13

Dyna Products ........................ 35

Band saw Blades

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Ask About Our Hahn Machinery ...................... 3 Dismanteling Blades Hurst Boiler ............................. 14

The Paul Bunyan Show ......... 39

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

Service • Our Price

- USED FORESTRY EQUIPMENT FOR SALE

❘

Item ID: 13908 Contact: Sam Ph: (888) 401-6367 x702

STACKING RAC

Item ID: 13995

Ph:Electric (888) 401-6367 x703 20 Row ............................

1-888-857-5153

drive, hyd pac for carriage,

Rotochopper ............................ 40 Contact: Austin

CW Mill-Hogzilla ................... 15

thIn Kerf

with onboard log turners, carriage

Thomas Industrial Controls..... 10

‘89 Timberjack 380A ❘  24/7 SUPPORT 0

 SELL YOUR EQUIPMENT TODAY l§

Item ID: 14039 Contact: Austin

‘90 Bell Super T

Item ID: 13896 www.BakerProducts.net Contact: Sam 800.S48.6914 I S73.663.7711 Ph: (888) 401-6367 x702 ❘

 (888) 401-MENS L!

NO. 25

John Deere Dual Arch Grapple,

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

IN THE NEWS

Smith Sawmill Service Expands to North ‘93 Barko 180B Carolina, Increases East Coast Coverage ‘16 Halverson H140 “Precision Under Pressure”

mith Sawmill Service, which supplies parts and equipment for sawmills and other wood processing mills, has acquired Precision Saw Works in Polkton, North Carolina, expanding its East Coast coverage of mills in the forest products industry. Smith Sawmill Service is dedicated to meeting the ever-changing needs of the wood industry. It provides services for sawmills, chip mills, pallet mills, paper mills, and plywood/ OSB manufacturers. Precision Saw Works, founded by Frank Curran in 1986, specializes in repair and 13428 Victory Ln. PO Boxand 124 circle saws and has manufacture of//band Adams Center, NY 13606 provided exemplary service to customers. The addition will enhance Smith Sawmill Service’s footprint on the East Coast, and with its

SHRINK‘05WRAP Gehl CTL 70 FIREWOOD/WASTEWOOD Item ID: JW-986495

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter

- Small manufacturer in PA has Sell Your WOOD – $300/cord or More!

with 1700 hours, in very good

condition. Easily produces Double or triplehigh your

madeby theshrink best valued log splitter. profits wrapping

quality chips with patented ‘Cone’ with Handles logs up to 32”. Uses wastewood - firewood WOOD-PAKER! drumAttractive design. Can easily loadsize 42’ various

13HP Honda Manual start packages canmotor. be obtained vans andwith produce 6 8 loads per but electronic option our high production, easily operatedis available. and day. Item ID 13882. x703 Eight Hasmachines Log Lift. Usesavailable. 4-way wedge affordableAustin machines. EDGERS GANGS for producing adjustable tosquare single two way. Great The ideal &equipment bundles Brewco Saws - Two Brewco Sawsin storage Value! PA. Item ID 12062. Sam x702 palletizable for ease and transporting. in excellent condition. Runs great.for free Firewood Processor - This is a Inquire details. Item ID Sam x702 • 3007 West homemade with a 10’ B &13644. B Manufacturing River Road processor • Olean, NY 14760

FIREWOOD PROCESSORS

log deck. Has a hydraulic grapple,

716-373-5881

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

chain and kicker that all runs off of a 4 cylinder Mercedes power

E-mail: bbmfg@verizon.net • Web: www.thewoodpaker.com unit. Has a 4’ chain saw that kicks

inch insert tooth circle saw, 30 foot  Issue 364 403

Lumbermens™  since 1986

❘

Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Smith Sawmill Item ID: 14078 Service, which provides services for sawContact: mills, chipAustin mills, pallet mills, paper mills, and plywood/ capacity!. Item ID 13421. Sam x702 Ph: (888) 401-6367 x703 OSB manufacturers, has added an East BARKO Coast location. From left to right is the company’s management 1994 Barko 160B - Electric team: Dustin Norris, Debra Smith, Paul Smith, Michael off onto a conveyor. This is a very knuckleboom, 30' boom,Smith. 75hp well built processor. Item ID 13820.

motor, Rotobec continuous

Firewood Processor - This is

(excellent condition.). Item ID

Sam x702

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

grapple, 5,000 original hours. 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

‘05

Boom cylinders have minor leaks.

Item Con Ph:

delimber, grapple has been rebuilt. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

‘99 51

Item Con Ph:

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS IN THE NEWS See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment existing infrastructure, will allow the company Boonville, of sawmill technology with multiple industry-at New York www.LumberMB\ISmagazine.com to better serve customers, both current and www.starwebhosting.net/woodsmen/ new, related patents. It is continuously striving to in that region and beyond. increase the efficiency and BANDMILLS productivity of the & HEADSAWS SOUTHWEST FOREST PRODUCTS EXPO Smith Sawmill Service will use the Precision Danckaert Band Resaw - Roughly Fri, 25wood Augustindustry. - Sat, 26 August The Tree hours on this machine since Springs, Saw Works facility and retain current management Hot Paul and Arkansas Debra Smith laid 10the foundation for theit that Started www.arkloggers.com has been rebuilt, it has a 24foot and employees to provide services for repairing family owned, family oriented, Smith Sawmillin it All! deck been 20 foot out feed deck and sharpening as well as the manufacture of 1990, and theyfeed have providing 72NDService ANNUAL in GREAT LAKES with 44 inch wheels, and all the Since 1986, Lumbermens has LOGGING & HEAVY EQUIPMENT EXPO circle saws, bandsaws, and custom sawmill parts. quality products and exemplary customer service published a monthly circular Thurs, 7 Sept - Sat, 9 Sept bells and whistles, its a production Frank sawmills, Curran and for over Michigan 30 years. With SERIES the help of their son, reaching •loggers, 67 HP his CAT son, DieselTravis, will continue Escanaba, 4000 machine, with air strain conveyers pallet makers, recyclers and and help lead this location. Engine to act as managers Michael, and general manager Dustin Norris, the that go up and down, with airbags, industrial woodworking plants • 44” Circular Saw MID-ATLANTIC LOGGING & BIOMASS The goal is to achieve a seamless integration company has continued to itgrow and build on the worldwide. includes two sets of Mcdonough • 20” Diameter Fri, 15 Sept - Sat, 16 Sept of bothPUBLISHER companies with no service interruption. legacy of Paul and Debra Smith. FIREWOOD pressure guides.PROCESSOR Top Casting wheel Capacity Selma, North Carolina Publishing will continue to receive the “OurWoods customers The addition of an East Coast • Single Joystick www.midatlantic-logging-biomass is supported on bothlocation sides. This MID-ATLANTIC ADVERTISING SALES Control expo.com/ same high quality products and service that they was a natural next-step in the evolution the is an extremely accurateof machine Morris Woods • 30 Ton Splitter in ve1y good condition, Cuts 130 have come to ext. expect,” said Paul Smith, president company. Under the stewardship of Michael and (888) 401-6367 704 KENTUCKY WOOD EXPO Cylinder morris@lumbermens.co feet a minute also has CLT presses. of Smith Sawmill Service. Sawmill Service will continue to Fri, Dustin, 15 Sept - Smith Sat, 16 Sept • 67 HP CAT Diesel 4000 SERIES MARKETING DIRECTOR Item forgetting ID 13876. Austin x703 Lexington, Kentucky Precision Saw Works is now a wholly-owned remain cutting-edge — never the past, Engine John Williams • 44” Circular Saw http://www.kfia.org/ S & W 125 Band Mill with subsidiary of ext. Smith but with an eye always on the future. • 20” Diameter (888) 401-6367 701 Sawmill Service and will beKentuckyWoodExpo.aspx • 67 HP CAT Diesel Capacity SERIES Caterpillar4000 generator - Low hours FIREWOOD PROCESSOR j@lumbermens.co named Smith Sawmill Service-North Carolina. For more • Single Joystickinformation about Smith Sawmill Engine Control on the mill, electronic computer Set • 44” Circular Saw BUNYAN SHOW DESIGN DIRECTOR THEService PAUL • 30 Ton Splitter its products and services, visit Smith Sawmill Service, which also and • has 20” Diameter Donna Heninger works,1 1/2" or 2" band, 22ft. track Fri, 6 Oct - Sun, 8 Oct Capacity FIREWOOD PROCESSORS Many Models &Cylinder locations in Texas and Louisiana, is an innovator www.sawmill.shop. • Single Joystick Cat 3406 140KW Genset, 12,400 Cambridge, Ohio EQUIPMENT REPS

BELL’S FIREWOOD PROCESSORS

BELL’S BELL’S FIREWOOD PROCESSORS

LOGGING & BIOMASS EXPO

BELL’S FIREWOOD PROCESSO BELL’S

BELL’S

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402 The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with out written consent. ©2017 Woods Publishing

Control www.ohioforest.org Options• to Choose From! 30 Ton Splitter • 67 HP CAT Diesel Cylinder

hours ready to run. Item ID 13434.

4000 SERIE

BELL’S FIREWOOD PROCESS BELL’S FIREWOOD PROCESSORS CARRIAGES & DRIVES BELL’S FIREWOOD PROCESSORS

Engine Sam x702 • 67 HP CAT Diesel 4000 SERIES • 44” Circular Engine Saw Many Models & 44” Circular Saw • 20”• Diameter • 20” Diameter Capacity Options to Choose From! 2010 Cardinal HD Carriage • 67 HP CAT Diesel 4000 SERIES Capacity • Single Joystick FIREWOOD TUMBLER Engine • Single Joystick Carriages (Sawmill) - Cardinal Control • 44” Circular • Saw Sturdy HSS Steel Welded Control • 30 Ton Splitter • 20” Diameter • 30 Ton Splitter line it includes carriage FIREWOOD TUMBLER 4’ Diameter Barrel Many Models & Carriage Cylinder Capacity •18 B & B Mfg. ............................... M&F Gauge Cylinder ............................. 28

** INFO LINK**

• Sturdy HSS Steel Welded

• 67Out HP CAT Diesel • Single Joystick 4000 SERIES with onboard log turners, carriage Options to Choose From! • Clean Chute • 4’ Diameter Barrel Engine Control B. H. Payne .............................. Meadows Mill, Inc .Bark ................ 33 • Removes 67 HP CAT Diesel 4000 SERIES • Clean Outpac Chute • 44” Circular Saw •16 Debris & as large as 2 ¼” drive, hyd for carriage, • 67 HP CAT Diesel • 30 Ton Splitter 4000 SER Engine • 20” Diameter • Removes Debris & Bark as large as 2 ¼” Cylinder Engine Capacity ••7Works with of ..................... our Double chain Lift 44” Circular Saw all Menominee Saw 29 Baker ...................................... 5, •Hydraulic Works with all of our conveyors Double chain Hydraulic sawyers cab, computer controls, • Single Joystick

‘01 Benson 34’ End 30 HSSDump Bell's Machining ..................... 27 Metal Detector's Inc. .............. • Sturdy Steel Welded • Single Joystick Capacity Many Models & • 44” Circular Saw

20” Diameter • Optional Honda Power Pack Available TUMBLER Control Honda PowerFIREWOOD •• Optional Pack Available Capacity• 20” Diameter cabinet with electronic drives for • 30 Ton Splitter Cylinder

Brute Force

Many Models &

• 4’ Diameter Barrel

Control • Single Joystick carriage knees, husk including Mfg. ..................... 31 Midwest Sharpening.............. 26 Out Item • Clean Chute ID: 13818 • 30 Ton Splitter Control • Removes Debris & Bark as large as36" 2 ¼” 48" bottom saw and top saw Cylinder Contact: Sam

Options to to Choose Choose From! Options From! Buck Equipment (AIM) ........ 36 Mor ..................................... 9 with all of our Double chain Hydraulic Lift conveyo •bark 30 Ton SplitterModels & • Works Many Cylinder (888)Power 401-6367 Ext. 603 • Optional Honda Pack Available Options to Choose From! Corley Mfg .............................. 32 Multitek ................................... Schutte Hammermill Many Models &12 FIREWOOD TUMBLER CRD Metalworks .................... 25 CW Mill-ArmorHog .............. 17 CW Mill-Hogzilla ................... 15 Dyna Products ........................ 35 Empire Hydraulics ................... 8 Great Lakes Mfg. .................... 34

Hahn Machinery ...................... 3

Options to Choose From! Piper's Saw Shop .................... 13 Grinder

Many Models & Options to Choose From! 1-888-995-1965

• Works with allwith of all our Double chain Hydraulic Lift conveyors • Works of our Double chain Hydraulic Lift conveyors Canada Optional Honda Power Pack Available FIREWOOD TUMBLER • Optional• Honda Power Pack Available Select Sawmill ......................... 19 HSS Steel Welded • Sturdy or visit us online • 4’ Diameter Barrel www.bellsmachining.com Smith Sawmill ........................... 4 Out Chute • Clean FIREWOOD TUMBLER • RemovesAvailable Debris & Bark as large as 2 ¼” Financing The Paul Bunyan Show ......... 39 with all •of Sturdy • Works our Double HSSchain SteelHydraulic Welded Lift conveyors Made InAvailable Please Call for Details • Optional Honda Power Pack • 4’ Diameter Canada Barrel

Please Call for Details Thomas Industrial Controls..... 10

Hurst Boiler ............................. 14

Mag 64-knive Source Grinder

ID: 14007 • Clean Out Chute 1-888-995-1965Item • Removes Debris & Bark as large as 2 ¼ Contact: Austin Union Grove Saw & Knife.. 2, 37

1-888-995-1965or visit us online Iron Bull ................................... 21

STACKING RAC Made In

FIREWOOD Canada • Sturdy HSSTUMBLER Steel Welded •• Sturdy HSS Steel 4’ Diameter BarrelWelded Item ID: 13965 Clean Out Chute Diameter Barrel FIREWOOD TUMBLER40 Rotochopper ............................ Many Models &••• 4’ Removes Debris & Bark as large as 2 ¼” • Sturdy HSS SteelTUMBLER Welded• FIREWOOD Clean Out Chute Contact: Austin • Sturdy HSS Steel Welded Works withDebris all of our Double Made............................ In • 4’ Diameter Barrel Options to Choose From! •• Removes & Bark aschain largeHydraulic as 2 ¼” L Row Electric 20 • 4’ Diameter Barrel Ph: (888) 401-6367 x703 Optional Honda Power Pack Available • Clean Out Chute Canada •• Works with all of our Double chain Hydrau Please Call for Details • Clean Out Chute • Removes DebrisDebris & Bark as large as 2 ¼” • Removes large In as 2 ¼” Honda Power Pack Available •as Optional Sawmill Exchange .................. 11 & BarkMade

Made In Canada

• (888) Works 401-6367 with all of our Double chain Hyd Ph: x703 • Optional Honda Power Pack Available

Refiner ................... 23 www.bellsmachining.com 2013 Caterpillar or visit us onlineUniversal Please CallPlease for Details Call for Details Financing Available www.BakerProducts.net Lignomat ................................. 24 WoodMizer ................................ l 535C 1-888-995-1965 swing motor. Has Inew jet fit www.bellsmachining.com 800.S48.6914 S73.663.7711 1-888-995-1965 Please fororDetails ItemCall ID: 13868 visit us onlineCall for Details Please system. This machine is loaded... or visit us online www.bellsmachining.com Contact: Sam  24/7 Financing Available ❘ l§  SELL YOUR EQUIPMENT SUPPORT has ❘ pro-heat  (888)system 401-MENS 1-888-995-1965 - USED FORESTRY EQUIPMENT FOR SALE TODAY ❘ L! 0 for cold NO. 27 Financing Available Kilgore Saw ............................. 22

Made In Canada

1-888-995-1965

www.bellsmachining.com Ph: (888) 401-6367 x702 or visit us onlineFinancing Available weather start. Has fire suppression

or visit us online

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

IN THE NEWS

Wood-Mizer Introduces WB2000 Industrial Sawmill

“Precision Under Pressure”

ood-Mizer introduces the WB2000 high performance industrial sawmill that has been engineered specifically to meet the needs of high-production timber processing markets in North and South America. Successfully installed and operating in six continents since its initial debut, the WB2000 expands the versatility and affordability of a high performance industrial sawmill in addition to providing world-class service and support from Wood-Mizer’s leading distribution network. The WB2000 is capable of sawing with 2-inch or 3-inch wide band blades. It combines the increased yield of thin kerf blade technology with the durability and reliability that high production operations demand. In addition, WB2000 sawmill blades can be sharpened with fast, accurate, and affordable CBN grinding wheel technology rather than relying on the expertise and costly resources of a professional saw doctor. 13428 Ln. //features PO Box 124 The Victory WB2000 a powerful 50 hp electric Adams Center, NY 13606 motor, heavy-duty construction, low maintenance, live feed 2-camera video system, and precision setworks for sawing large diameter softwood, hardwood, and tropical

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

condition. Easily produces madeQuality the best valued logSteel. splitter. • Saws manufactured fromhigh only the Highest Nickel Alloy

logs. The WB2000 can be used as a standalone sawmill to fully process logs or in addition to an existing system to John Deere C6 process irregular logs or produce‘95 custom orders. Electronic setworks and an Tree elevated operator Farmer control station allow a single operator to manage all sawing and Item ID: 13920 Austin ‘13 KMC Track hydraulic log2500 handling functionsContact: while maintaining a clear Ph:setworks (888) 401-6367 x703 view of production. The advanced are displayed Skidder on a HMI touch-screen, which presents board and cant Item ID: 14078 sizes along with current head capacity!. height, Item feedIDposition, and Contact: Austin 13421. Sam x702 Ph: (888) 401-6367 x703 blade power. In addition, deluxe joysticks provide the BARKO operator with precise control of 1994 all sawing and log handling Barko 160B - Electric functions and feature proportional hydraulic speed control. off onto a conveyor. This is a very knuckleboom, 30' boom, 75hp Hydraulic log handling functions include a dual-post well built processor. Item ID 13820. motor, Rotobec continuous log clamp, vertical side supports, bi-directional chain Sam x702 grapple, 5,000 original hours. log turner, and power positioning theItem logIDand Firewood Processor - This is rollers for (excellent condition.). removing cants. a Chomper Model 16 PDA 13238. Chris x700 “Wood-Mizer is committed providing best automatice firewood processor 1995 to Barko 775 B Fellerthe Buncher sawmill equipment production operations with John Deere power unit for with high - Pumps recently redone. 400 hrs throughout the world,” said Luke Murray, Wood-Mizer low hours. Control panel includes on injection pump. always started TITAN productwater manager. WB2000 industrial 14’ Snow Pusher tach, oil pressure, temp and“The good. in good gives working order. 22in Item ID: JW-492406 sawmill businesses a robust, aﬀ ordable, and proven amp gauges. Cuts logs up to 16”. kohing head. head works great. ‘11 Doosan DL200 Contact: J Williams sawmill with the added beneﬁ ts of increased yield, One owner and comes with all Item ID 13185. Sam x702 Item ID: JW-113876 Ph: (888) 401-6367 x701 production, and versatility.” manuals and receipts. Purchased 1999 Barko 160D new engine with Contact: J Williams The Wood-Mizer WB2000 high-performance Ph:for (888) 401-6367 new $32,500. Item IDx701 13865. approximately 1500 hours. Hour industrial Sam x702 sawmill is now available meterworldwide. dont work. The last 2 owners For more EQUIPMENT information, contact localit Wood-Mizer LOGGING haveyour only used to load trucks or representative or visit www.woodmizer.com/titan. BANDIT as a backup as needed. Has a CTR

• We Tension Your Sawload to Your Leaving Our Factory. drum design. Can easily 42’RPM Speed 13HPBEFORE Honda motor. Manual start

Chipper - Cat Under Carriage at

When You Buy Your Circular Saws From B.H. Payne You’ve Bought the best... We Guarantee It!

‘05 Gehl CTL 70

Item ID: JW-986495 Traditional Quality Combined Contact: J Williams With Todays Technology Ph: (888) 401-6367 x701

‘83 John Deere Call 800 752-0627 Circular Saws 4850 Make Sure To Ask For Our Free, Complete Saw Catalog Saw Bits and Shanks Quality Brand Reg. U.S. Pat Off

chain conveyer, 8 way splitter, on Circular Knives We Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth Item ID: 14073 Carbide Tipped Saws 20,000lb goose neck trailer. Item ID Contact: Austin Carbide Strobe ® Saws Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also AustinTips, x703 Payne 401-6367 & Company Stock Ph:B.H. (888) x703 & Sell Bits & 13916. Shanks, Carbide Diamond Wheels, Saw Manufacturers Knife Grinding Wheels, Gumming Wheels & Knives. BestSaw Value Portable Log Splitter

withHere’s 1700 hours, in very - Small in PA has What You Get good With Every B.H. Paynemanufacturer Saw

• Each Sawwith Milled with State-Of-The-Art Precision Milling Machine. quality chips patented ‘Cone’ Handles logsCNC up to 32”. Uses • Your Satisfaction - Completely Guaranteed.

vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

B.H.EDGERS Payne &&Company, GANGS Inc.

P.O. Box 90608 Brewco Saws - Two Brewco Saws East Point, GA 30364 in excellent condition. Runs great. 404 761-8711 Item ID 13644. Sam x702 Fax 404 761-5398

FIREWOOD PROCESSORS

2010“Since Shop Built Wood Processor 1890” - It has a 353 Detroit diesel, 40

inchE-mail: insert tooth circle saw, 30 foot info@paynesaws.com  Issue 364 403

but electronic option is available. Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. 4’ chain saw that kicks WebHas Site:a www.paynesaws.com

Lumbermens™  since 1986

❘

1999 Bandit 1900 Tracked Disc

50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

‘05 Transport Sam x702 Trailers Custom 2004 Bandit Beast Model 4680 Log Pup

Well maintained. Item ID 13294.

3412 Caterpillar Diesel engine

Item ID: JW-538174 with 850 HP. 5300 hrs. Mill in Contact: J Williams good condition. Just finished Ph: (888) 401-6367 x701 10

Acre clearing job, ready to work!

Remote control. Big production Waratah 624 Super - New

Computer for head  List  seLL  exchange  (Logrite). buy  save 10500 hours. New main pump

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

‘04 Fabtek 344Bvalue 94 Barko 275 - Excellent

Item ID: JW-093430 with low at hours at 3,500. 5.9 Contact: J Williams CUMMINS continuous grapple. Ph: (888) 401-6367 x701

Runs Great!. Item ID 13740. Sam

x702 Processor - This is a Chomper

BELL

super 14, with a 60hp engine. In 1990 Bell Super T - This Bell has very nice shape. Only 171 hours, a brand new Duetz engine. Lever comes with green chain conveyer. control, 33” bar, pump and tranny All of the manuals for the engine,

and ❘the chopper itself come with  LumbermensCO.com it, as well as all of the electrical

** CALENDAR**

IN THE NEWS

ASTEC Launches Rebrand In Order to Simplify The Tree Business that Started it All!

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking Tennessee plants CHATTANOOGA, worldwide.

FOR CLASSIFIEDS Call 888.401.MENS CALENDAR OF EVENTS See pictures, prices, and NY STATE WOODSMEN'S FIELD SFPA DAYS EXPO Fri, 18 August - Sun, 20 August Location all equipment at August 11-13, 2021 • Atlanta,ofGA Boonville, New York www.LumberMB\ISmagazine.com www.starwebhosting.net/woodsmen/ GREAT LAKES

EXPO September 9-11, 2021 BANDMILLS & HEADSAWS SOUTHWEST FOREST PRODUCTS EXPO FairgroundsDanckaert • Escanaba, MI - Roughly Band Resaw Fri, 25 August - UP Sat, State 26 August hours on this machine since it Hot Springs, ArkansasKY WOOD10EXPO www.arkloggers.com has been rebuilt, it has a 24foot in

September 17-18, 2021 • Lexington, KY

feed deck 20 foot out feed deck 72ND ANNUAL GREAT FORESTRY LAKES MID-SOUTH EQUIPMENT SHOW with 44 inch wheels, and all the LOGGING & HEAVY EQUIPMENT EXPO September 17-18, 2021 Thurs, 7 Sept - Sat, 9 Sept bells and whistles, its a production

Escanaba, Michigan PAUL BUNYAN SHOW machine, with air strain conveyers

October 1-3,that 2021 go up and down, with airbags, — Astec Industries Inc. has MID-ATLANTIC LOGGING & BIOMASS it includes two sets of Mcdonough launched a new, modern look with a rebranding initiativeFri, 15 Sept 84th OREGON - Sat, 16 Sept LOGGING CONFERENCE PUBLISHER pressure guides. Top Casting wheel to coincide with its business model. The rebrand includes Selma, NorthFebruary Carolina 24-26, 2022 • Eugene, OR Woods Publishing www.midatlantic-logging-biomass is supported on both sides. This a new logo, color palette, and website. MID-ATLANTIC ADVERTISING SALES expo.com/ LOGGING & BIOMASS EXPO is an extremely accurate machine TheMorris launch comes while the organization streamlines Woods in ve1y good condition, Cuts 130 (888) 401-6367 ext. 704 its internal structure and operations to improve efficiency KENTUCKY Every Wide Band WOODReputable EXPO morris@lumbermens.co feet a minute also has CLT presses. and drive growth. Fri, 15 Sept - Sat, 16 Sept Supplier Offers MARKETING DIRECTOR Item ID 13876. Austin x703 Kentucky The organization’s former brands — including Astec Lexington, 3 High Quality Swedish Steel John Williams http://www.kfia.org/ S & W 125 Band Mill with Inc., Astec do Brasil, Astec Australia, BMH Systems, (888) 401-6367 ext. 701 3 3” – 8” Band Width Caterpillar generator - Low hours KentuckyWoodExpo.aspx j@lumbermens.co Breaker Technology, Carlson Paving, Con-E-Co, Heatec, 3 16 to 20 Gage on the mill, electronic computer Set KPI-JCI andDIRECTOR Astec Mobile Screens, Osborn, Peterson,THE PAUL BUNYAN SHOW DESIGN 3 Double Cut Options Donna Heninger works,1 1/2" or 2" band, 22ft. track RexCon, andB1600 Telsmith — will no longer operate Fri, 6 Oct - Sun, 8 Oct ‘06 Roadtec Brewco 3 Choice of Swage or Stellite Cat 3406 140KW Genset, 12,400 Cambridge, Ohio EQUIPMENT REPS as separate subsidiary companies and will all take on the Resaw Sam Wall www.ohioforest.org hours ready to run. Item ID 13434. ASTEC name. ext. 702 (888) 401-6367 Item ID: 13862 BUT ONLY THE Sam x702 The unification is a significant part of the company’s sam@lumbermens.co Contact: Sam CARRIAGES & DRIVES OneASTEC BY MENOMINEE SAW GUARANTEES Woods Ph:Austin (888)business 401-6367model x702 including its ‘Simplify, Focus ‘05 Woodmizer 2010 Cardinal HD Carriage (888) 401-6367 ext. 703 and Grow’ strategy. “We made the decision to unify to • Cutting Edge Plasma Welds austin@lumbermens.co Carriages (Sawmill) - Cardinal LT300 to do business make it easier for our dealers and customers MAILING ADDRESS • The Industry’s Highest Band Saw Capacity Carriage line it includes carriage Item ID: 14031 with us,” said Barry Ruffalo, president CEO of Astec B & B Mfgand . ............................... 18 M&F Gauge ............................. 28 P.O. Box 1916 Contact: Austin with onboard log turners, carriage • Quick Delivery from our HUGE Inventory Industries. “By coming together as one organization, we Columbia, TN 38402-1916 Ph: (888).............................. 401-6367 x703 16 Meadows Mill, Inc. ................ 33 B. H. Payne drive, hyd pac for carriage, (888) 401-6367 can offer greater customer service and drive innovation.” • Fast Sharpening & Exchange Program Menominee Saw ..................... 29 Baker ...................................... 5, 7 sawyers cab, computer controls, AD SUBMISSIONS “The rebrand enables us to build our strength together to Keep YOU Running May be sent to cabinet with electronic drives for 27 Metal Detector's Inc. .............. 30 under one common name Bell's and Machining purpose,”..................... continued morris@lumbermens.co • Competitive Pricing carriage knees, husk including Brute Force . ..................... 31 Midwest Sharpening.............. 26 Ruffalo. “We can better leverage our Mfg growth as one POSTMASTER 48" bottom and 36" top saw And ONLY Menominee Gives You saw Everything ASTEC team rather than individual brands.” The new logo Buck Equipment (AIM) ........ 36 Morbark ..................................... 9 Send address changes to: John Deere 548G2 Lumberman's Exchange You need in a Wide Band Saw – Plus represents the company’s purpose: ‘Built to Connect’ and Corley Mfg .............................. 32 Multitek ................................... 12 Item ID: 14042 P.O. Box 1916 vision to connect people, processes and products. Expert Service from the Industry’s Most Contact: Austin Columbia, TN 38402 CRD Metalworks .................... 25 Piper's Saw Shop.................... 13 The new 401-6367 website can be found‘14 at www.astecindustries. Knowledgeable Staff. Ph: (888) x703 B66TD The Lumberman's Exchange is CW Mill-ArmorHog .............. 17 Rotochopper............................ 40 com and replaces the previous subsidiary websites. published monthly by Woods Rotochopper Got a Wide Mill-Hogzilla ................... 15 Row Electric ............................ 20 Band Problem? - 3410P.O. hours. Publishing, Box$32,000 1916, in recent Dealers, customers, suppliersCW and consumers will be Call Menominee Saw Today and You’ll Columbia, 38402. All rights Item ID: 13838 and repairs. Fecon Dyna Products ........................ 35 Sawmill Exchange .................. 11 ableupgrades toAllTN fieditorial/ nd information company, its product reserved. advertorial about the Contact: Sam Learn Why More Mills Trust the Pro! BH250are Mulching Head. Item ID in one location. submissions usedother at the offerings, and resources Empire (888)Hydraulics 401-6367 ................... Ext. 603 8 Select Sawmill ......................... 19 discretion of the publisher and may 13502. Samis x702 ASTEC a leading of specialized be edited for purposes of clarity global manufacturer Great Lakes Mfg. .................... 34 Smith Sawmill ........................... 4 2011 Tigercat - Thishave is a building, aggregate processing and space. Although all efforts equipment for 620D asphalt road ...................... 3 The Paul Bunyan Show ......... 39 been made to ensure accuracy of 5500 Hahn ItemMachinery ID 13408. Sam x702 hour skidder with only and low concrete production. content submitted by advertisers Hurst Boiler ............................. 14 Tigercat 630D Grapple hours the on aLumberman's cummins engine and and writers, Operations are divided into2014 two primary business Thomas Industrial Controls..... 10 Exchange, its principles and 900&16th Menominee, MI 49858 Skidder - Dual Arch Grapple. Just a fire suppression system. Comes Iron Bull ................................... 21 Union Grove Saw KnifeSt., .. 2, 37 segments. Infrastructure associates, are not held liable for Solutions includes road building, Tel: 906-863-2609 Fax: 906-863-1147 1990 hours. 3 year/5000 hour PT mounted on 35.5 tires at 50% back errors or omissions. Reproduction, asphalt and concrete plants, thermal solutions. Kilgoreand Sawstorage ............................. 22 Universal Refiner ................... 23 Email: info@menomineesaw.com in whole part,front is prohibited warranty. 35.5 tires with dualing andor40% and goodwith chains on Material Solutions includes aggregate other material www.BakerProducts.net Lignomatand ................................. 24 WoodMizer ................................ l out written consent. rings at 60%. Wide blade. Winch. all 4 tires. Has the bigger 630 axles WWW.MENOMINEESAW.COM 800.S48.6914 I S73.663.7711 processing solutions. ©2017 Woods Publishing

** INFO LINK**

WOLVERINE

STACKING RAC

TOLL FREE 1-800-582-0470

and no winch. Center pins are tight Item ID 13526. Sam x702 FORESTRY FOR SALE2015❘ Tigercat  SELL EQUIPMENT ❘ the0 grapple 24/7 SUPPORT - USED EQUIPMENT l§ TODAY on roatation w/ a 234BYOUR Loader - Model and extra fuel tank. Item ID 13929. Sam x702

234B. Only 300 hours on this

30’ reach on the boom. Joystick

❘2006 Tigercat L! (888) 401-MENS 630C Grapple NO. 29 Skidder - Very good running

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer 2004 John Deere 548G III Item ID: 100068

14’ John Deere 750K Item ID: 10053

Contact: AUSTIN Contact: JOE Email: Austin@lumbermensco.com Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 703 13428 Victory Ln. //709 PO Box 124 Phone: 888-401-6367 EXT OR 931-797-8029 OR 801-362-2170 Adams Center, NY 13606

06’ KMC John Deere ‘13 2500548G3 Track Item ID: 100066 Skidder

Contact: AUSTIN Email: Item Austin@lumbermensco.com ID: 14078 Phone: 888-401-6367 EXT 703 Contact: Austin 931-797-8029

Ph: (888) 401-6367 x703

off onto a conveyor. This is a very

well built processor. Item ID 13820.

B U Y S

Sam x702

Tigercat 250 w/Grapple Saw Item ID: 100058

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

H O T

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

Timberjack 460

ID: with 1700Item hours, in100049 very good

Contact:Easily AUSTIN condition. produces high Email: Austin@lumbermensco.com quality chips with patented Phone: 888-401-6367 EXT‘Cone’ 703 OR 931-797-8029 drum design. Can easily load 42’

vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FORD PICKER TRUCK FIREWOOD PROCESSORS Item ID: 100027

2010 Shop Built Wood Processor Contact: AUSTIN - ItEmail: has aAustin@lumbermensco.com 353 Detroit diesel, 40 Phone: 888-401-6367 EXT 703 inch insert931-797-8029 tooth circle saw, 30 foot  Issue 364 403

Firewood Processor - This is

84’ John Deere 540B

‘05 Gehl CTL 70 Contact: AUSTIN

Email:ID: Austin@lumbermensco.com Item JW-986495 Phone: 888-401-6367 EXT 703 Contact: J Williams 931-797-8029 Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter

97’ Timberjack 240C

- Small manufacturer in PA has Item ID: 100076

2006 John Deere 648G III

a Chomper Model 16 PDA Item ID: 100077

automatice firewood processor

Item ID: 13920

Contact: Austin 2005 John Deere 643H Item401-6367 ID: 100072x703 Ph: (888)

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 801-362-2170 capacity!. OR Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID

84’ John Deere 440C

13238. Chris Itemx700 ID: 100074

801-362-2170 low hours. OR Control panel includes

1995 Barko 775 B Feller Buncher Contact: AUSTIN Email: Austin@lumbermensco.com -Phone: Pumps recently redone. 400 hrs 888-401-6367 EXT 703 931-797-8029 on injection pump. always started

amp gauges. Cuts logs up to 16”.

kohing head. head works great.

Contact: JOE

Email:John Joe@lumbermensco.com with Deere power unit with Phone: 888-401-6367 EXT 709

tach, oil pressure, water temp and One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam ‘02 x702 Jackson Shavings Mill Item ID: 13736 LOGGING EQUIPMENT

good. in good working order. 22in Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners

2006 John Deere 848H

have only used to load trucks or Item ID:it 100069

made the best valued log splitter. Contact: AUSTIN Email: Austin@lumbermensco.com Handles logs up to 32”. Uses Phone: 888-401-6367 EXT 703 931-797-8029 13HP Honda motor. Manual start

Contact: AUSTIN BANDIT Email: Austin@lumbermensco.com 1999 Bandit 1900 Tracked Disc Phone: 888-401-6367 EXT 703 OR 931-797-8029 Chipper - Cat Under Carriage at

Contact: JOE Email: Joe@lumbermensco.com delimber, grapple has been rebuilt. Phone: 888-401-6367 EXT 709 OR 801-362-2170 Boom cylinders have minor leaks.

Has Log Lift. Uses 4-way wedge

Diesel. 7500 Hours. One owner.

94 Barko 275 - Excellent value

but electronic option is available.

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

2006 John Deere 437C log deck. Has a hydraulic grapple, Item ID: 100078 chain and kicker that all runs off Contact: JOE

Joe@lumbermensco.com ofEmail: a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 709

unit. Has a OR 4’ chain saw that kicks 801-362-2170

Lumbermens™  since 1986

❘

50% or better. 475 hp Cummins

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar CatDiesel 515 engine Item ID: with 850 HP. 5300 100029 hrs. Mill in

good condition. Just finished 10 Contact: AUSTIN Email: Austin@lumbermensco.com Acre clearing job, ready EXT to work! Phone: 888-401-6367 703 OR 931-797-8029 Remote control. Big production

 List  seLL  exchange  buy  save

as a backup as needed. Has a CTR

Item ID 13694. Sam x702

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702Timberjack 450C Item ID: 100026 BELL

1990 Bell Super T - This Bell has Contact: AUSTIN Email: Austin@lumbermensco.com aPhone: brand new Duetz engine. Lever 888-401-6367 EXT 703 931-797-8029 control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM Call 888.401.MENS NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

John Deere 700H Forestry Dozer TheID: Tree Item 99930 that Started Contact: SAM it All! Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

JD 643GSALES ADVERTISING

Item ID: 80565 Morris Woods (888) 401-6367 ext. 704 Contact: JOE morris@lumbermens.co Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 MARKETING OR 801-362-2170 DIRECTOR

SOUTHWEST 13’ FOREST PRODUCTS EXPO 06’ John Deere 650J Prentice 2384B Fri, 25 AugustItem - Sat, August Item ID: 100025 ID: 26 100023

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Selma, North Carolina www.midatlantic-logging-biomass 16’ John Deere 640L John Deere 650H LGP MID-ATLANTIC Item ID: 10016 expo.com/ LOGGING & BIOMASS EXPO Forestry Dozer Item ID: 99810

Contact: AUSTIN

KENTUCKY WOOD EXPO Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Fri, 15 Sept Sat, 16 Sept 931-797-8029

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

Send address to: PS8 POSTchanges PEELER Lumberman's Exchange Item ID: 100055 P.O. Box 1916 Contact: AUSTIN Columbia, TN 38402 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 The Exchange is Lumberman's 931-797-8029

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content 97’ submitted by advertisers Barko 160C and writers, the Lumberman's Item ID: 100054 Exchange, its principles and Contact:are AUSTIN associates, not held liable for Email: errors or Austin@lumbermensco.com omissions. Reproduction, Phone: 888-401-6367 EXT 703 in whole or931-797-8029 part, is prohibited with out written consent. ©2017 Woods Publishing

BANDMILLS & HEADSAWS 12’ Tigercat 234B

Danckaert Band Item ID: Resaw 100014- Roughly 10 hours on this machine since it Contact: AUSTIN Email: Austin@lumbermensco.com has been rebuilt, it has a 24foot in Phone: 888-401-6367 EXT 703 feed deck 931-797-8029 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. John Deere 750J This Item ID:accurate 100015 machine is an extremely Contact: AUSTIN in ve1y good condition, Cuts 130 Email: Austin@lumbermensco.com feet a minute also has CLT presses. Phone: 888-401-6367 EXT 703 931-797-8029 Item ID 13876. Austin x703

S & W 125 Band Mill with Caterpillar generator - Low hours

L O G G I N G

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR

MAILING ADDRESS

Phone: 888-401-6367 EXT 703

931-797-8029 72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Sam Wall (888) 401-6367 ext. 702 16’ John Deere 648L sam@lumbermens.co Item ID: 100052 Austin Woods Contact: AUSTIN ext. 703 (888) 401-6367 Email: Austin@lumbermensco.com austin@lumbermens.co Phone: 888-401-6367 EXT 703 931-797-8029

Hot Springs, Arkansas Contact: AUSTIN www.arkloggers.com Email: Austin@lumbermensco.com

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

on the mill, electronic computer Set

works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434. Sam x702

92’ Timberjack 240A Grapple

Timbco 425C

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029 B & B Mfg. ............................... 18

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029 M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck (AIM)648H ........ 36 08’ Equipment JOHN DEERE Item ID: 100051 Corley Mfg .............................. 32 Contact: AUSTIN CRD .................... 25 Email:Metalworks Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029.............. 17 CW Mill-ArmorHog

Morbark ..................................... TIGERCAT 610C 9 Item ID: 100046 Multitek ................................... 12 Contact: AUSTIN Piper's Saw Shop.................... 13 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Rotochopper ............................ 40 931-797-8029

2016 Tigercat 604 E Cable Skidder

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

** INFO LINK** Item ID: 100048

John Deere 548G 14 Hurst Boiler ............................. Item ID: 100050 Iron Bull ................................... 21 Contact: AUSTIN Email: Austin@lumbermensco.com Kilgore Saw ............................. Phone: 888-401-6367 EXT 703 22 931-797-8029 Lignomat ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Item ID: 100028

310E ..... 10 ThomasPrentice Industrial Controls Item ID: 100044 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Email: Austin@lumbermensco.com Universal Refiner ................... Phone: 888-401-6367 EXT 70323 931-797-8029 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

Komatsu 931.1

CARRIAGES & DRIVES Item ID: 99949

2010 Cardinal HD Carriage Contact: AUSTIN Email: Austin@lumbermensco.com Carriages (Sawmill) - Cardinal Phone: 888-401-6367 EXT 703 Carriage931-797-8029 line it includes carriage

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw Item ID:55393

STACKING RAC

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

93’ Prentice 210 Item ID: 14216

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029 www.BakerProducts.net 800.S48.6914 I S73.663.7711

❘ L!  (888) 401-MENS 401-MENS

NO. 31

Phone

315.284.4126 PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM TO VIEW DESCRIPTION,

“Precision Under Pressure”

Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

07’ Tigercat 724E

John Deere 850K LGP

Item ID: 14218

Item ID: 99814

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Contact: Item ID:AUSTIN JW-909632 Email: Austin@lumbermensco.com Contact: J Williams EXT 703 Phone: 888-401-6367 931-797-8029 Ph: (888) 401-6367 x701

Husky Brute XL 235

2004 Timbco 445EXL

John Deere 540G2 Cable Skidder

Item ID: 100004

Item ID: 53891

L O G G I N G

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘16 Halverson 2011 John DeereH140 648H Item ID:(DEMO) 14217 Skidsteer

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

Item ID: 14170

‘13 KMC 2500 Track Skidder

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

12’ John Deere 437D

532 CAT Feller Buncher

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Item ID: 14209

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

16’ CAT 545D

Item ID: 14211 with 1700 hours, in very good Contact: AUSTIN Email: Austin@lumbermensco.com condition. Easily produces high Phone: 888-401-6367 EXT 703 931-797-8029 quality chips with patented ‘Cone’

drum design. Can easily load 42’

Item ID: 14079

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

10’ John Deere 648H

Best ValueItem Portable Log Splitter ID: 14210

- Contact: Small manufacturer AUSTIN in PA has Email: Austin@lumbermensco.com made the best valued log splitter. Phone: 888-401-6367 EXT 703 931-797-8029 Handles logs up to 32”. Uses 13HP Honda motor. Manual start

well built processor. Item ID 13820.

‘93 Barko 180B

Item ID: 14077 97’ JohnAustin Deere 548G2 Contact: Item ID: 99972 Ph: (888) 401-6367 x703

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

‘95 John Deere C6 John Deere 700K LGP Tree Farmer Dozer

Item ID: 13920 Item ID: 3674 Contact: Austin Contact: SAM Ph: Sam@lumbermensco.com (888) 401-6367 x703 Email: Phone: 888-401-6367 EXT 702

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Timbco 820D Sam x702 Item ID: 18370 Firewood Processor - This is AUSTIN aContact: Chomper Model 16 PDA Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 automatice firewood processor 931-797-8029 with John Deere power unit with

07’ 5,000 Tigercat grapple, original620C hours. Item ID: 14248 (excellent condition.). Item ID Contact: AUSTIN 13238. Austin@lumbermensco.com Chris x700 Email: Phone: 888-401-6367 703 1995 Barko 775 B FellerEXT Buncher 931-797-8029 - Pumps recently redone. 400 hrs

tach, oil pressure, water temp and

good. in good working order. 22in

low hours. Control panel includes amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865. John Deere 437E

Sam x702 Knuckleboom Loader Item ID: 63181 LOGGING EQUIPMENT Contact: SAMBANDIT Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at

on injection pump. always started kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

12’ John Deere 843K

meter dont work. The last 2 owners Item ID: 14212

have onlyAUSTIN used it to load trucks or Contact: Email: Austin@lumbermensco.com as a backup as needed. Has a CTR Phone: 888-401-6367 EXT 703 931-797-8029 delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

Buying? Selling?

vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

but electronic option is available. Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off

50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

lumbermensco.com l 888.401.6367

- It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 403

of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

Timberjack The Tree380 Item ID: 99926 that Started Contact: SAM it All! Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

Caterpillar ADVERTISING SALES Item ID: 2476

Morris Woods (888) 401-6367 ext. 704 Contact: SAM morris@lumbermens.co Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

MARKETING DIRECTOR

Item ID: 27398

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

Send address changes to: ‘14 CAT 535C Lumberman's Exchange Item ID: 13840 P.O. Box 1916 Contact: SAM TN 38402 Columbia, Email: Sam@lumbermensco.com The Lumberman's Exchange is 702 Phone: 888-401-6367 EXT

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers Risley Rolly 2 and writers, the Lumberman's Item ID: 1993 Exchange, its principles and associates, are not held liable for Contact: SAM errors or omissions. Reproduction, Email: Sam@lumbermensco.com inPhone: whole or part, is prohibited 888-401-6367 EXTwith 702 out written consent. ©2017 Woods Publishing

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

feed deck 20 foot out feed deck

with 44 inch wheels, and all the

LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

it includes two sets of Mcdonough pressure guides. Top Casting wheel

Selma, North Carolina www.midatlantic-logging-biomass MID-ATLANTIC expo.com/ LOGGING & BIOMASS EXPO TC Skidder 2010 John Deere 648H Cat 518 Grapple Skidder Item ID: 57023

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

is supported on both sides. This

Tigercat 724E Feller Buncher

is an extremely accurate machine

Item ID: 74169

KENTUCKY WOOD EXPO Contact: SAM Fri, 15 Sept - Sat, 16 Sept Email: Sam@lumbermensco.com Lexington, Kentucky EXT 702 Phone: 888-401-6367 http://www.kfia.org/ KentuckyWoodExpo.aspx

in ve1y good Itemcondition, ID: 99815 Cuts 130 feet a minute also has CLT presses.

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Item ID 13876. Austin x703

S & W 125 Band Mill with Caterpillar generator - Low hours

on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

Donna Heninger

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

Grapple Skiddersince it 10 hours on this machine Item ID: 78104 has been rebuilt, it has a 24foot in

Contact: SAM Email: Sam@lumbermensco.com 72NDPhone: ANNUAL GREAT LAKES 888-401-6367 EXT 702

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

MAILING ADDRESS

Danckaert Resaw - Roughly John Band Deere 548G2

Hot Springs, ItemArkansas ID: 99931 www.arkloggers.com

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

DESIGN DIRECTOR Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co ‘11 Tigercat 620D Item ID: 13929 Austin Woods (888) ext. 703 Contact:401-6367 SAM austin@lumbermens.co Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 Timberjack 430August PARTS

Timbco 425B

Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434.

Cat 322CL Sam x702

Processor Logmax CARRIAGES7000XT & DRIVES

John Deere 3754D

** INFO LINK** Item ID: 99962

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Item ID: 45747

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

L O G G I N G

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Prentice 2384

Item ID: 78834 2010 Cardinal HD Carriage

Contact: SAM Email: Sam@lumbermensco.com Carriages (Sawmill) - Cardinal Phone: 888-401-6367 EXT 702

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) ........ 36 Bandit 1850 Track Chipper

Mor bark ..................................... Prentice 210E Loader9 Item ID: 79682 Multitek ................................... 12

Boom & Delimber

Contact: AUSTIN CRDAustin@lumbermensco.com Metalworks .................... 25 Email: Phone: 888-401-6367 EXT 703 OR 931-797-8029 CW Mill-ArmorHog .............. 17

Contact: AUSTIN Piper's Saw Shop.................... 13 Email: Austin@lumbermensco.com

Rotochopper 40 OR ............................ 931-797-8029

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler 14 Feller............................. Buncher

Thomas Industrial Controls ..... 10 Timbco 445EXL Hotsaw

Item ID: 99904 Corley Mfg .............................. 32

ID: 78672 Iron BullItem ................................... 21

Contact: KilgoreAUSTIN Saw ............................. 22 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 LignomatOR ................................. 24 931-797-8029

- USED FORESTRY EQUIPMENT FOR SALE

❘

Phone: 888-401-6367 EXT 703

FellerSaw Buncher Union Grove & Knife.. 2, 37 Item ID: 47200 Universal Refiner ................... 23 Contact: SAM Email: Sam@lumbermensco.com WoodMizer ................................ l Phone: 888-401-6367 EXT 702

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" Prentice bottom saw andKnuckle 36" top saw 384

STACKING RAC Item ID: 49732

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

1998 John Deere 548G Grapple skidder Item ID: 99921

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 www.BakerProducts.net OR 931-797-3915

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 33

Phone

315.284.4126 PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM TO VIEW DESCRIPTION,

“Precision Under Pressure”

Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

2012 Tigercat 250C Item ID: 99966

'09 John Deere 753J Buncher Item ID: 14106

‘93 Barko 180B

Item 2015 ID: 14077 Cat 545D Contact: Austin Item ID: 45196 Ph: (888) 401-6367 x703

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Contact: Item ID:AUSTIN JW-909632 Email: Austin@lumbermensco.com Contact: J Williams EXT 703 Phone: 888-401-6367 931-797-8029 Ph: (888) 401-6367 x701

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

2012 John Deere 648H

Timberjack 240

2014 Tigercat 234B

‘95 John Deere C6 Timberjack 240 Tree Farmer Cable Skidder

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Contact: AUSTIN ‘13 KMC 2500 Track Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Skidder 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Price $45,000

L O G G I N G

08’ John Deere 437C

‘16 Halverson $46,500 H140 Item ID:(DEMO) 53095 Skidsteer

Item ID: 80318

Item ID: 29966

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

2017 Eco Log 688D Item ID: 99994

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

2016 Cat 563C

Item ID: 99970 with 1700 hours, in very good

Rhottne F-11 Item ID: 99976

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

2012 Cat D6K XL

Best ValueItem Portable Log Splitter ID: 14169

Phone: 888-401-6367 EXT 703 931-797-8029 quality chips with patented ‘Cone’

- Small manufacturer in PA has Contact: AUSTIN Email: Austin@lumbermensco.com made the best valued log splitter. Phone: 888-401-6367 EXT 703 931-797-8029 Handles logs up to 32”. Uses

vans and produce 6 - 8 loads per

but electronic option is available.

Contact: AUSTIN

condition. Easily produces high Email: Austin@lumbermensco.com

drum design. Can easily load 42’ day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644.20 Sam x702 Morbark Chipharvester Item ID: 38035 FIREWOOD PROCESSORS

Contact: SAMWood Processor 2010 Shop Built Email: Sam@lumbermensco.com - ItPhone: has a 353 Detroit diesel, 888-401-6367 EXT40702 inch insert tooth circle saw, 30 foot

 Issue 364 403

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with 848L a 10’ 2015 John Deere

Itema hydraulic ID: 83128 grapple, log deck. Has

chain and kicker that all runs off Contact: AUSTIN Email: Austin@lumbermensco.com ofPhone: a 4 cylinder Mercedes power 888-401-6367 EXT 703 unit. Has 931-797-8029 a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

well built processor. Item ID 13820. Sam2009 x702 Valmet 840.4 Item ID: 79249 Firewood Processor - This is aContact: ChomperAUSTIN Model 16 PDA Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 automatice firewood processor 931-797-8029 with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

John Deere 648H

Sam x702 Grapple Skidder Item ID: 96833 LOGGING EQUIPMENT

Contact: SAMBANDIT Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 -

3412 Caterpillar180E DieselLoader engine Prentice with 850 HP. 5300 hrs. Mill in & CTR saw Item ID: 99822 good condition. Just finished 10

Contact: AUSTIN Acre clearing job, ready to work! Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Remote control. Big production

 List  seLL  exchange  buy  save

Item ID: 13920 Item ID: 60608 Contact: Austin Contact: SAM Email: Ph:Sam@lumbermensco.com (888) 401-6367 x703 Phone: 888-401-6367 EXT 702

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

MC 166 grapple, 5,000Rotochopper original hours. Item ID: 8165 (excellent condition.). Item ID Contact: SAM 13238. Chris x700

Email: Sam@lumbermensco.com

1995 Barko 775 B FellerEXT Buncher Phone: 888-401-6367 702

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

Tigercat 830C

meterLeveling dont work. The last 2 owners Cutter 94337 have onlyItem usedID: it to load trucks or

as a backup Contact: SAM as needed. Has a CTR Email: Sam@lumbermensco.com

delimber, grapple EXT has702 been rebuilt. Phone: 888-401-6367 Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

Cat 515 Cable BELL Skidder

Item ID: 99873 1990 Bell Super T - This Bell has

SAM aContact: brand new Duetz engine. Lever Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

John Deere 540B Item 0908 The ID: Tree

that Contact: SAMStarted Email: Sam@lumbermensco.com it All! Phone: 888-401-6367 EXT 702 Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

Cat 535C Grapple ADVERTISING SALES Skidder Morris Woods

ID: 50218 (888)Item 401-6367 ext. 704

morris@lumbermens.co Contact: SAM Email: Sam@lumbermensco.com MARKETING DIRECTOR Phone: 888-401-6367 EXT 702

John Deere 650H LGP Item ID: 84627

Contact: SAM Sam@lumbermensco.com 72NDEmail: ANNUAL GREAT LAKES Phone: 888-401-6367 EXT 702

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Selma, North Carolina www.midatlantic-logging-biomass MID-ATLANTIC John Deere 540D 2007 Cat 517 expo.com/ LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Contact: SAM Contact: AUSTIN Email: Austin@lumbermensco.comFri, Email: Sam@lumbermensco.com 15 Sept Sat, 16 Sept Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 702 Lexington, Kentucky 931-797-8029 http://www.kfia.org/ KentuckyWoodExpo.aspx

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

Send address changes to: 2013 John Deere 753J Lumberman's Exchange Item ID: 99902 P.O. Box 1916 Contact: AUSTIN TN 38402 Columbia,

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 The Lumberman's Exchange is OR 931-797-8029

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers Dymax Skidsteer Tree Cutter and writers, the Lumberman's ID: 96694 Exchange, Item its principles and associates, not held liable for Contact:are AUSTIN errors orAustin@lumbermensco.com omissions. Reproduction, Email: 888-401-6367 EXTwith 703 inPhone: whole or part, is prohibited written931-797-8029 out consent. ©2017 Woods Publishing

Item ID: 5613

Item ID: 60554

DESIGN DIRECTOR Sam Wall 2009 2384 Prentice (888) 401-6367 ext. 702 Knuckleboom Loader sam@lumbermens.co Item ID: 83019 Austin Woods Contact: SAM (888) 401-6367 ext. 703 Email: Sam@lumbermensco.com austin@lumbermens.co Phone: 888-401-6367 EXT 702

Hot Springs, ItemArkansas ID: 92188 www.arkloggers.com

2012 Eco Log 590D

John Deere 540G3

** INFO LINK** Item ID: 99996

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Item ID: 99991

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly

‘03 John Deere 748GIII

ID:machine 13851 since it 10 hoursItem on this

has been rebuilt, Contact: SAM it has a 24foot in Email: Sam@lumbermensco.com feed deck 20 foot out feed deck Phone: 888-401-6367 EXT 702 with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This

Mulcher is anFranklin extremely accurate machine Item ID: 99927 in ve1y good condition, Cuts 130 Contact: SAMalso has CLT presses. feet a minute Email: Sam@lumbermensco.com Phone: Item ID888-401-6367 13876. Austin EXT x703702 S & W 125 Band Mill with Caterpillar generator - Low hours

L O G G I N G

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August Sat, 26 August Cat 939- Crawler Loader

See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

on the mill, electronic computer Set

works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434. Sam x702

2003 CARRIAGES Tigercat 250 & Log Loader DRIVES

Item ID: 46268 2010 Cardinal HD Carriage Contact: WALKER Carriages (Sawmill) - Cardinal Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck (AIM)450 ........ 36 95Equipment Timberjack

Morbark ..................................... 9

Log Max 7000

Dual Arch Skidder 32 Corley Mfg ..............................

Item ID: 12270 CRD Metalworks .................... 25

Barko 395ML

Multitek Item ................................... 12 ID: 99943 Contact:Saw WALKER Piper's Shop.................... 13

Contact: AUSTIN Email: Austin@lumbermensco.com CW Mill-ArmorHog 17 Phone: 888-401-6367 EXT 703 OR.............. 931-797-8029

Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 Rotochopper ............................ 40 OR 931-797-3915

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Controls ..... 10 2013 Industrial John Deere 437D Item ID: 96805 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Universal Refiner ................... 23 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 WoodMizer ................................ l 931-797-8029

John Deere 440C

ID: 99999 Iron BullItem ................................... 21 Contact: KilgoreWALKER Saw ............................. 22 Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 ................................. 24 Lignomat OR 931-797-3915

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw Item ID: 96628

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Tigercat 630C Item ID: 83971

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net 931-797-8029 800.S48.6914 I S73.663.7711

❘ L!  (888) 401-MENS 401-MENS

NO. 35

Phone

315.284.4126 PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM TO VIEW DESCRIPTION, Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

“Precision Under Pressure”

1997 Timberjack 460 Cable Skidder

Timberjack 460 Dual Arch Item ID: 91657

Item ID:24393

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Tigercat 234 Knuckle Boom Loader

Clark 667

Item ID: 68516

Item ID: 59500

L O G G I N G

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘16 Peterson Halverson H140 Chipper Item ID:(DEMO) 52045 Skidsteer

Contact: AUSTIN Item ID: JW-909632 Email: Austin@lumbermensco.com Contact: J Williams Phone: 888-401-6367 EXT 703 OR 931-797-8029

Ph: (888) 401-6367 x701

JD 437D loader Item ID: 35922

‘13 KMC 2500 Track Skidder

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

Caterpillar D4H Item ID: 99982

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

‘83 John Deere 4850

Item ID: 14073 Contact: Austin John401-6367 Deere 440A Ph: (888) x703

Cable Skidder

Item ID: 99941 with 1700 hours, in very good Contact: WALKER

condition. Easily produces high Email: Walker@lumbermensco.com

‘Cone’

drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam28000 x702 Hood Item ID: 18775 FIREWOOD PROCESSORS

2010 Shop Built Wood Processor Contact: AUSTIN Email: Austin@lumbermensco.com - ItPhone: has a 353 Detroit diesel, 888-401-6367 EXT40703 931-797-8029 inch insert tooth circle saw, 30 foot  Issue 364 403

Item ID: 8834

Contact: SAM Email: Sam@lumbermensco.com ‘05 Gehl CTL 70EXT 702 Phone: 888-401-6367

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

Phone: 888-401-6367 EXT 707 quality chips with patented OR 931-797-3915

John Deere 437D Log Loader

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

John Deere 750J

Best Value Portable Log Splitter Forestry Dozer - Small manufacturer in PA has Item ID: 62252

well built processor. Item ID 13820. Sam x702 ‘06 CAT 517 ID: 13869 FirewoodItem Processor - This is

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade a 10’ Johnprocessor Deere with 437D Item ID: 10075 log deck. Has a hydraulic grapple,

Contact: AUSTIN chain and kicker that all runs off Email: Austin@lumbermensco.com ofPhone: a 4 cylinder MercedesEXT power 888-401-6367 703 931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Item ID: 13920

Contact: AUSTIN Contact: Austin Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 x703 Ph: (888) 401-6367 OR 931-797-8029

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Tigercat 240B Knuckle Boom Loader

grapple, 5,000 original hours.

good. in good working order. 22in

amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased

PRENTICE new2005 for $32,500. Item ID210E 13865. Sam x702LOG LOADER Item ID: 99946

LOGGING EQUIPMENT BANDIT

50% or better. 475 hp Cummins

adjustable to single two way. Great

‘95 John Deere C6 2004 Timbco 425 EXL Tree Farmer Item ID: 99855

tach, oil pressure, water temp and

low hours. Control panel includes

but electronic option is available. Has Log Lift. Uses 4-way wedge

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

(excellentItem condition.). Item ID ID: 76297 13238. Chris x700 Contact: SAM Email: Sam@lumbermensco.com 1995 Barko 775 B Feller Buncher Phone: 888-401-6367 EXT 702 - Pumps recently redone. 400 hrs

Email: Sam@lumbermensco.com Phone: 888-401-6367 Handles logs up to EXT 32”.702 Uses

13HP Honda motor. Manual start

Item ID: 14077 John Deere 748G3 Contact: Austin Item ID: 99990 Ph: (888) 401-6367 x703

aContact: ChomperSAM Model 16 PDA Email: Sam@lumbermensco.com automatice firewood processor Phone: 888-401-6367 EXT 702 with John Deere power unit with

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 1999 Bandit 1900 Tracked Disc OR 931-797-3915

made theSAM best valued log splitter. Contact:

‘93 Barko 180B

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine

John Deere 648D

with 850 Item HP. 5300 Mill in ID: hrs. 99942

good condition. Just finished 10 Contact: WALKER

Email: Walker@lumbermensco.com Acre clearing job, ready Phone: 888-401-6367 EXT 707to work! OR 931-797-3915

Remote control. Big production

 List  seLL  exchange  buy  save

on injection pump. always started kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

Barko 160B Self-

meterPropelled dont work. The last 2 owners Loader have onlyItem usedID: it to load trucks or 99812

as a backup Contact: SAM as needed. Has a CTR Email: Sam@lumbermensco.com

delimber, grapple EXT has702 been rebuilt. Phone: 888-401-6367 Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702 2013

John Deere 748H Item ID: 85729 BELL

1990 Bell Super T - This Bell has Contact: AUSTIN Email: Austin@lumbermensco.com a brand new Duetz engine. Lever Phone: 888-401-6367 EXT 703 931-797-8029 control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

Item ID: 14109

The Tree

Contact: AUSTIN that Started Email: Austin@lumbermensco.com Phone: 888-401-6367 it All! EXT 703 OR 931-797-8029 Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

ADVERTISING SALESArch Tigercat 630 C Dual

Item ID: 59580 Hot Springs, Arkansas www.arkloggers.com Contact: AUSTIN

Item ID: 99947

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

72ND ANNUAL LAKES ORGREAT 931-797-8029 LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Item ID: 99944

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

May be sent to morris@lumbermens.co

POSTMASTER

Send address changes 2015 Cat 563C to: Lumberman's Exchange Item ID: 72531 P.O. Box 1916 Contact: AUSTIN Columbia, TN 38402 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 The Lumberman's Exchange is OR 931-797-8029

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Timberjack 380C Exchange, its principles and Item ID: 72259 associates, are not held liable for errors or omissions. Reproduction, Contact: WALKER inEmail: wholeWalker@lumbermensco.com or part, is prohibited with out written888-401-6367 consent. Phone: EXT 707 ©2017 Woods Publishing

it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This

Log Excavator 225 LC is anLoader/ extremely accurate machine Item ID: 51519 in ve1y good condition, Cuts 130

Item ID: 99945

KENTUCKY WOOD EXPO Contact: WALKER Walker@lumbermensco.com Fri, Email: 15 Sept - Sat, 16 Sept Phone: 888-401-6367 EXT 707 Lexington, Kentucky OR 931-797-3915

Contact: AUSTIN Email: feet aAustin@lumbermensco.com minute also has CLT Phone: 888-401-6367 EXT 703 OR 931-797-8029

John Deere 648l

S & W 125 Band Mill with Caterpillar generator - Low hours

on the mill, electronic computer Set

works,1 1/2" or 2" band, 22ft. track

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434. Sam x702 Barko 495 ML 2008 Item ID: 7648 CARRIAGES & DRIVES

John Deere 437D

** INFO LINK** Item ID: 96378

Item ID: 99939

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

presses.

Item ID 13876. Austin x703

http://www.kfia.org/ KentuckyWoodExpo.aspx

Cambridge, Ohio www.ohioforest.org

Delimber Austin Woods

AD SUBMISSIONS

that go up and down, with airbags,

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

Sam Wall (888) 401-6367 ext. 702 Komatsu PC270LC sam@lumbermens.co

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

bells and whistles, its a production machine, with air strain conveyers

Selma, North Carolina www.midatlantic-logging-biomass SATCO 318T MID-ATLANTIC expo.com/ LOGGING & BIOMASS EXPO chipper Morbark 23 disc processing head

Donna Heninger

MAILING ADDRESS

with 44 inch wheels, and all the

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

EQUIPMENT REPS

Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

ID:machine 99963 since it 10 hoursItem on this

has beenAUSTIN rebuilt, it has a 24foot in Contact: Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703deck feed deck 20 foot out feed 931-797-8029

Escanaba, Michigan

DESIGN DIRECTOR

Item ID: 43950 (888) 401-6367 ext. 703 Contact: SAM austin@lumbermens.co

Danckaert Band Resaw848H - Roughly 12’ John Deere

L O G G I N G

Morris Woods Item ID: 10836 (888) 401-6367 ext. 704 Contact: AUSTIN morris@lumbermens.co Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 MARKETING DIRECTOR 931-797-8029 John Williams (888) 401-6367 ext. 701 j@lumbermens.co

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Sat, 573 26 August Tigercat 630C Fri, 25 August -Cat

01’ Ponsee Bison Forwarder

Contact: AUSTIN 2010 Cardinal HD Carriage Email: Austin@lumbermensco.com Carriages (Sawmill) - Cardinal Phone: 888-401-6367 EXT 703 931-797-8029 Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) Excavator 330Lx Link........ Belt36 Item ID: 70897 Corley Mfg .............................. 32

Morbark ..................................... 9

CW Mill-Hogzilla ................... 15 Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

CW Mill-ArmorHog .............. 17

Timbco 445D 14 Hurst‘00 Boiler ............................. Item ID: 14096 Iron Bull ................................... 21 Contact: AUSTIN Email: Austin@lumbermensco.com Kilgore Saw ............................. 22 Phone: 888-401-6367 EXT 703 931-797-8029 24 LignomatOR .................................

- USED FORESTRY EQUIPMENT FOR SALE

❘

drive, hyd pac for carriage,

48" bottom and 36" top saw 540Bsaw John Deere

Cable Skidder

Timbco 425EXL Barsaw

Multitek ................................... 12 Item ID: 74878 Piper's Saw Shop.................... 13 Contact: SAM Email: Sam@lumbermensco.com Rotochopper............................ 40 Phone: 888-401-6367 EXT 702 Row Electric ............................ 20

Contact: AUSTIN Email: CRDAustin@lumbermensco.com Metalworks .................... 25 Phone: 888-401-6367 EXT 703 OR 931-797-8029

with onboard log turners, carriage

'01 John Deere 648G3 Thomas Industrial Controls ..... 10 Item ID: 90899 Union Grove Saw & Knife.. 2, 37 Contact: SAM Universal Refiner ................... 23 Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 l WoodMizer ................................

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

STACKING RAC

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 or 931-797-3915

Timbco 425C Item ID: 99948

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 www.BakerProducts.net OR 931-797-3915

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 37

Phone

315.284.4126 PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM TO VIEW DESCRIPTION, MOST WANTED!

“Precision Under Pressure”

Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Cat 527 Swingboom Grapple Skidder Dozer Item ID: 99841

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

John Deere 648G3 Item ID: 99992

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

Timberjack 360C

John Deere 210G

Item ID: 89706

L O G G I N G

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Item ID: 99983

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

FEATURED!

JD 648G Grapple Skidder ‘16 Halverson H140 Item ID: 54867 Skidsteer (DEMO)

Contact: AUSTIN Item ID: JW-909632 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Contact: J Williams 931-797-8029

Ph: (888) 401-6367 x701

Timberpro 620 Item ID: 79674

Contact: AUSTIN ‘13 KMC 2500 Track Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Skidder 931-797-8029

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703 off onto a conveyor. This is a very

Morbark 30XL Item ID: 13937

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

John Deere 650G

Item ID: 99852 with 1700 hours, in very good Contact: WALKER

Email: Walker@lumbermensco.com condition. Easily produces Phone: 888-401-6367 EXT 707 high OR 931-797-3915

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam525 x702 CAT Item ID: 99853 FIREWOOD PROCESSORS

Contact: 2010 ShopWALKER Built Wood Processor Email: Walker@lumbermensco.com

707 40 - ItPhone: has a888-401-6367 353 DetroitEXT diesel, OR 931-797-3915

inch insert tooth circle saw, 30 foot  Issue 364 403

Tracked Log Picker/ Skidder Equipment Item ID: 99859

Contact: SAM

Email: Gehl Sam@lumbermensco.com ‘05 CTL 70 Phone: 888-401-6367 EXT 702

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

1995 Bell ultra T Best Value Portable Log Splitter Item ID: 100003 - Small manufacturer in PA has

well built processor. Item ID 13820.

‘93 Barko 180B

ItemJohn ID: 14077 Deere 648L Contact: Austin Item ID: 99993 Ph: (888) 401-6367 x703 Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

‘95 John Deere C6 Timberpro 745C Tree Farmer Item ID: 99938 Item ID: 13920

Contact: AUSTIN Contact: Austin Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Ph: (888) 401-6367 x703 931-797-8029

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Cat 525D Grapple skidder w/Winch

VALMET Sam x702 840.2 FORWARDER Item ID: 9770 Firewood Processor - This is AUSTIN aContact: Chomper Model 16 PDA Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 automatice firewood processor 931-797-8029 with John Deere power unit with

(excellentItem condition.). Item ID ID: 99857 13238. Chris x700 Contact: SAM

tach, oil pressure, water temp and

good. in good working order. 22in

low hours. Control panel includes amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

‘00 Timberjack 1110

Sam x702Item ID: 14033

LOGGING EQUIPMENT Contact: AUSTIN Email: Austin@lumbermensco.com BANDIT

grapple, 5,000 original hours.

Email: Sam@lumbermensco.com 1995 Barko 775 B Feller Phone: 888-401-6367 EXT 702Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 Q70 hours. Hour Franklin

Item ID:The 5458 meter dont work. last 2 owners

931-797-3915 Handles OR logs up to 32”. Uses

Phone: 888-401-6367 EXT 703 1999 Bandit 1900 Tracked Disc 931-797-8029

have only AUSTIN used it to load trucks or Contact: Email: Austin@lumbermensco.com as a backup as needed. EXT Has703 a CTR Phone: 888-401-6367 931-797-8029 delimber, grapple has been rebuilt.

but electronic option is available.

50% or better. 475 hp Cummins

Item ID 13694. Sam x702

Contact: WALKER

Email: the Walker@lumbermensco.com made best valued log splitter. Phone: 888-401-WT 707

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Valmet 430FXL with Komatsu 233 barsaw

homemade processor with a 10’

log deck. Has hydraulic Itema ID: 99908 grapple, chain and kicker Contact: SAM that all runs off Sam@lumbermensco.com ofEmail: a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 702 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine John Deere 648G3 with 850 HP. 5300 Mill in Item ID: hrs. 99987

good condition. Contact: WALKER Just finished 10 Email: Walker@lumbermensco.com

Acre clearing job, ready Phone: 888-401-6367 EXT 707to work! OR 931-797-3915

Remote control. Big production

 List  seLL  exchange  buy  save

Boom cylinders have minor leaks. 94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

Hydro Ax 611E Item ID: 58544 BELL

1990 Bell Super T - This Bell has Contact: AUSTIN Email: Austin@lumbermensco.com a brand 888-401-6367 new Duetz engine. Lever Phone: EXT 703 931-797-8029 control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

Item 98053 TheID: Tree that Started Contact: AUSTIN Email: Austin@lumbermensco.com it All! EXT 703 Phone: 888-401-6367

931-797-8029 Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

Franklin 170 ADVERTISING SALES

Item ID: 99827 Morris Woods (888) 401-6367 ext. 704 Contact: WALKER Email: Walker@lumbermensco.com morris@lumbermens.co Phone: 888-401-6367 EXT 707 OR 931-797-3915 MARKETING DIRECTOR

John Deere 648G III John Deere 640D Fri, 25 2006 August - Sat, 26 August Item ID: 100008 Hot Springs, Arkansas www.arkloggers.com Contact: JOE

Item ID: 99845

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 72ND ANNUALORGREAT LAKES 801-362-2170

LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

May be sent to morris@lumbermens.co

POSTMASTER

Send changes to: 848 Gaddress Grapple Skidder

Lumberman's Exchange Item ID: 85843 P.O. Box 1916 Contact: AUSTIN Columbia, TN 38402 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 The Lumberman's Exchange is 931-797-8029

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Timbco 425EXL Exchange, Item its principles and ID: 99998 associates, are not held liable for Contact: WALKER Reproduction, errors or omissions. Walker@lumbermensco.com inEmail: whole or part, is prohibited Phone: 888-401-6367 EXT 707 with out written ORconsent. 931-797-3915 ©2017 Woods Publishing

bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

Selma, North Carolina www.midatlantic-logging-biomass MID-ATLANTIC John Deere 650H CAT 515 expo.com/ LOGGING & BIOMASS EXPO Item ID: 50512

is supported on both sides. This

Tigercat 620Emachine is an extremely accurate Item ID: 99984 in ve1y good condition, Cuts 130

Item ID: 99856

KENTUCKY WOOD EXPO Contact: AUSTIN Contact: WALKER Walker@lumbermensco.com Email: Austin@lumbermensco.comFri, Email: 15 Sept Sat, 16 Phone: 888-401-6367 EXT Sept 707 Phone: 888-401-6367 EXT 703 OR 931-797-3915 931-797-8029 Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

Contact: WALKER feet aWalker@lumbermensco.com minute also has CLT presses. Email: Phone: 888-401-6367 EXT 707 Item IDOR13876. Austin x703 931-797-3915

S & W 125 Band Mill with Caterpillar generator - Low hours

on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

Donna Heninger

AD SUBMISSIONS

with 44 inch wheels, and all the

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

Contact: has beenJOE rebuilt, it has a 24foot in Email: Joe@lumbermensco.com Phone: 888-401-6367 709deck feed deck 20 foot outEXT feed OR 801-362-2170

Escanaba, Michigan

DESIGN DIRECTOR Sam Wall (888) 401-6367 ext. 702 '93 John Deere 548E sam@lumbermens.co Item ID: 14184 Austin Woods Contact: AUSTIN ext. 703 (888) 401-6367 Email: Austin@lumbermensco.com austin@lumbermens.co Phone: 888-401-6367 EXT 703 931-797-8029 MAILING ADDRESS

Danckaert Band Resaw - 450C Roughly 1994 Timberjack Item ID: 100009 10 hours on this machine since it

Prentice 180

Tigercat 615C

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

** INFO LINK** Item ID: 7822

L O G G I N G

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO

Timbco 425D

Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434. Sam x702

John Deere 540B

CARRIAGES & DRIVES Item ID: 99986

Item ID: 17058

2010 Cardinal Contact: WALKERHD Carriage Email: Walker@lumbermensco.com Carriages (Sawmill) Cardinal Phone: 888-401-6367 EXT -707 OR 931-797-3915

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment Prentice (AIM) 210 E ........ 36 Item ID: 98009 Corley Mfg .............................. 32

Mor barkTimberjack ..................................... 1994 240 B9 Item ID:74044 Multitek ................................... 12

John Deere 648G3 Grapple Skidder

Contact: AUSTIN .................... 25 CRD Metalworks Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 CW Mill-ArmorHog 931-797-8029 .............. 17

Contact: WALKER Piper's Saw Shop.................... 13 Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 70740 Rotochopper ............................

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

John Deere 648H

Iron Bull ................................... 21 Item ID: 100006 Contact: KilgoreWALKER Saw ............................. 22 Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 Lignomat ................................. 24 OR 931-797-3915

- USED FORESTRY EQUIPMENT FOR SALE

❘

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC Item ID: 51014

'04 John Deere 700H Thomas Industrial Controls ..... 10 Item ID: 14187 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Email: Austin@lumbermensco.com Universal Refiner ................... Phone: 888-401-6367 EXT 70323 931-797-8029 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

2010 Tigercat 724E Item ID: 14247

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029 www.BakerProducts.net 800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 39

Phone

315.284.4126 PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM TO VIEW DESCRIPTION,

“Precision Under Pressure”

Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

John Deere 540D Cable Skidder Item ID: 99277

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

JD 648 G3 Grapple Skidder Item ID: 4572

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Treefarmer C7T GM ‘16 Halverson H140 Grapple/Winch Skidder Item ID: 11726 Skidsteer (DEMO)

‘93 Barko 180B

96’ John Deere 643D Item ID: 14077 Item ID: 14207 Contact: Austin Ph: (888) 401-6367 x703 Contact: AUSTIN

Contact: Item ID:AUSTIN JW-909632 Email: Austin@lumbermensco.com Contact: J Williams EXT 703 Phone: 888-401-6367 931-797-8029 Ph: (888) 401-6367 x701

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

90's Model Timberjack 240A Item ID: 14111

‘95 John Deere C6 Hydro Ax 411 Tree Farmer Item ID: 98954

Contact: WALKER ‘13 KMC 2500 Track Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 Skidder

Contact: AUSTIN Contact: Austin Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Ph: (888) 401-6367 x703 931-797-8029

FEATURED HOT-BUY!

Prentice 2432 (’09)

Cat D4H TSK Grapple w/ Winch Equipment Item ID: 99843

L O G G I N G

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Item ID: 89885

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 801-362-2170

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

Prentice 180E Item ID: 99846

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

John Deere 640D Cable Skidder

with 1700 hours, in very good Item ID: 43930

condition. Easily produces high Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

John Deere 648H Grapple FIREWOOD w/Winch PROCESSORS Equipment

2010 Shop Item Built Wood Processor ID: 99849 - ItContact: has aSAM 353 Detroit diesel, 40 Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

inch insert tooth circle saw, 30 foot  Issue 364 403

Rayco 160 Forestry Mulcher Item ID: 77447

Contact: SAM

Email: Sam@lumbermensco.com ‘05 Gehl CTL 70 Phone: 888-401-6367 EXT 702

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

2014Portable Prentice Best Value Log 2210 Splitter “Self Propelled”

- Small manufacturer in PA has Item ID: 99900

made the best valued log splitter. Contact: AUSTIN

well built processor. Item ID 13820. Sam x702

John Deere 450H LGP Firewood Processor - This is Item ID: 99891 a Chomper Model 16 PDA Contact: SAM

Email: Sam@lumbermensco.com automatice firewood processor Phone: 888-401-6367 EXT 702

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

08’ Valmet 415EX Sam x702 Item ID: 99923

LOGGING EQUIPMENT Contact: AUSTIN Email: Austin@lumbermensco.com BANDIT

Email: Austin@lumbermensco.com Handles logs up to 32”. Uses

Phone: 888-401-6367 EXT 703 931-797-8029 1999 BanditOR1900 Tracked

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Johnprocessor Deere 859M homemade with a 10’

Tracked Cutter w/ log deck. Has a hydraulic grapple, Quadco 3200 Barsaw chain andItem kickerID: that all runs off 31379 ofContact: a 4 cylinder SAM Mercedes power Email: Sam@lumbermensco.com

Phone: 888-401-6367 702 unit. Has a 4’ chainEXT saw that kicks

Lumbermens™  since 1986

❘

Disc

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine

Item ID: 13920

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Cat5,000 559B Knuckle grapple, original hours. Boom Loader

(excellent condition.). Item ID Item ID: 99872 13238. Chris x700 Contact: SAM

Email:Barko Sam@lumbermensco.com 1995 775 B Feller Buncher Phone: 888-401-6367 EXT 702

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500Deere hours. Hour 540B John

Cable Skidder meter dont work. The last 2 owners have onlyWALKER used it to load trucks or Contact: Email: Walker@lumbermensco.com

as a backup as needed. Phone: 888-401-6367 EXTHas 707 a CTR

or 931-797-3915 delimber, grapple has been rebuilt.

Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam

Timberjack 225 Cable Skidder

x702

good condition. Just finished 10 Contact: AUSTIN Email: Austin@lumbermensco.com Acre clearing job, ready to work! Phone: 888-401-6367 EXT 703 Remote control. Big production 931-797-8029

1990 BellItem SuperID: T 46567 - This Bell has

with 850 HP. 5300 Mill in Item ID: hrs. 99817

 List  seLL  exchange  buy  save

Bell Ultra-C Tracked BELL Cutter

aContact: brandSAM new Duetz engine. Lever Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

Timbco 425Exl Fri, 25 August 648 E-Cable Sat, 26Skidder August

Item ID: 1020

The Tree

PUBLISHER

Woods Publishing

Barko 495B ADVERTISING SALES

Item ID: 84253

Contact: AUSTIN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 888-401-6367 EXT 703 72NDPhone: ANNUAL GREAT LAKES 931-797-8029 931-797-8029

May be sent to morris@lumbermens.co

POSTMASTER

Send to: Johnaddress Deerechanges 650K LGP Lumberman's Forestry Exchange Dozer P.O. ItemBox ID: 1916 85213 Columbia, TN 38402

Contact: SAM Email: Sam@lumbermensco.com The Lumberman's Exchange Phone: 888-401-6367 EXT 702 is

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content by advertisers Catsubmitted D5H TSK Grapple and writers, the Lumberman's Dozer Exchange, Winch its principles and 99809 associates, Item are notID: held liable for errors or omissions. Reproduction, Contact: SAM inEmail: wholeSam@lumbermensco.com or part, is prohibited with out written consent. Phone: 888-401-6367 EXT 702 ©2017 Woods Publishing

that go up and down, with airbags, it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass MID-ATLANTIC ‘89expo.com/ Timberjack 380A John Deere 648G3 LOGGING & BIOMASS EXPO Item ID: 14039

pressure guides. Top Casting wheel

Contact: AUSTIN KENTUCKY WOOD EXPO Contact: AUSTIN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Fri, 15 Sept Sat, 16 Sept Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 931-797-8029 931-797-8029 Lexington, Kentucky

Contact: JOE Email: feet a Joe@lumbermensco.com minute also has CLT presses. Phone: 888-401-6367 EXT 709 OR 801-362-2170 Item ID 13876. Austin x703

is supported on both sides. This

Timberjack 1270C

is an extremely accurate Item ID: 8676 machine

Item ID: 58995

in ve1y good condition, Cuts 130

http://www.kfia.org/ KentuckyWoodExpo.aspx

S & W 125 Band Mill with Caterpillar generator - Low hours

on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

‘80 John Deere 550

Tigercat 604 Cable Skidder

AD SUBMISSIONS

bells and whistles, its a production machine, with air strain conveyers

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

with 44 inch wheels, and all the

Escanaba, Michigan

Donna Heninger

MAILING ADDRESS

Contact: AUSTIN Email: feedAustin@lumbermensco.com deck 20 foot out feed deck Phone: 888-401-6367 EXT 703 OR 931-797-8029

LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

EQUIPMENT REPS

Phone: 888-401-6367 EXT 702

- Fabtech 10Harvestor hours on this machinehead since it Item ID: 99821 has been rebuilt, it has a 24foot in

ItemArkansas ID: 87791 Hot Springs, www.arkloggers.com Contact: AUSTIN

DESIGN DIRECTOR

Item ID: 6552 Austin Woods (888) 401-6367 ext. 703 Contact: SAM Email: Sam@lumbermensco.com austin@lumbermens.co

2001 Cat Band 311CU Processor/ Danckaert Resaw - Roughly

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org Timberpro TL735B Tracked Feller Buncher

** INFO LINK** Item ID: 14037

Item ID: 64107

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

L O G G I N G

Item ID: 44764 Morris Woods (888) 401-6367 Contact: AUSTIN ext. 704 morris@lumbermens.co Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 MARKETING DIRECTOR 931-797-8029 John Williams (888) 401-6367 ext. 701 j@lumbermens.co

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO

John Deere 437C

Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434.

JD 648H (’08) Sam x702 Item ID: 6051 CARRIAGES & DRIVES

Contact: JOE HD Carriage 2010 Cardinal Email: Joe@lumbermensco.com Phone: 888-401-6367 709 Carriages (Sawmill)EXT - Cardinal OR 801-362-2170

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck (AIM) ........ ‘98Equipment 611 Ex-Hydro Ax 36 Item ID: 13948 Corley Mfg .............................. 32 Contact: AUSTIN CRD .................... 25 Email:Metalworks Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 CW Mill-ArmorHog .............. 17 OR 931-797-8029

‘85 John Deere 440D 9 Mor bark ..................................... Item ID: 12453 Multitek ................................... 12 Contact: AUSTIN Email: Austin@lumbermensco.com Piper's Shop.................... Phone:Saw 888-401-6367 EXT 70313 OR 931-797-8029 Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

CAT 525C 14 Hurst2011 Boiler ............................. Item ID: 14203 Iron Bull ................................... 21 Contact: AUSTIN Email: Austin@lumbermensco.com Kilgore 888-401-6367 Saw ............................. Phone: EXT 703 22 931-797-8029 Lignomat ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE

❘

‘05Industrial Tigercat 230B Thomas Controls ..... 10 Item ID: 13911 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Email: Austin@lumbermensco.com Universal Refiner ................... Phone: 888-401-6367 EXT 70323 OR 931-797-8029 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

648 G Skidder Item ID: 76963

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

John Deere 640D Item ID:63000

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 www.BakerProducts.net 800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 41

Phone

315.284.4126 PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM TO VIEW DESCRIPTION,

“Precision Under Pressure”

Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

L O G G I N G

JD 640D (’95) 2003 CAT 525B Item ID: 3800

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

Item ID: 51746

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 801-362-2170

Tigercat 234B Knuckle boom loader

‘80 John Deere 540B Item ID: 11345

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Item ID: 99820

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘16‘05Halverson H140 Timberjack 608B Item ID: 13898 Skidsteer (DEMO)

Item ID:SAM JW-909632 Contact: Email: Sam@lumbermensco.com Contact: J Williams Phone: 888-401-6367 702 Ph: (888) 401-6367 EXT x701

2016 John Deere 437E Item ID: 100007

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

Meadows 2 Deluxe Sawmill Package Miner Edger Item ID: 45399

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

S A W M I L L

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 Jackson Lumber

Harvester Circle Mill

03’ Woodmizer LT-300 Operation Item ID: 14171

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 ‘05 Gehl CTL 70EXT 703 OR 931-797-8029

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

drum design. Can easily load 42’

Best Value Portable Log Splitter Hurdle 2 Sawmill Item ID: 72999 - Small manufacturer in PA has Contact: SAM made the best valued log splitter. Email: Sam@lumbermensco.com Handles up to 32”. Uses Phone: logs 888-401-6367 EXT 702 13HP Honda motor. Manual start

day. Item ID 13882. Austin x703

Has Log Lift. Uses 4-way wedge

Item ID: 2346good with 1700 hours, in very Contact:Easily SAM produces high condition. Email: Sam@lumbermensco.com quality chips with patented Phone: 888-401-6367 EXT‘Cone’ 702

vans and produce 6 - 8 loads per

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

Breezewood Band Mill FIREWOOD PROCESSORS Item ID: 83736

2010 Shop Built Wood Processor Contact: SAM - ItEmail: has a Sam@lumbermensco.com 353 Detroit diesel, 40 Phone: EXT30702 inch insert888-401-6367 tooth circle saw, foot  Issue 364 403

but electronic option is available.

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

Baker Double End Trim Saw

log deck. Has hydraulic Itema ID: 49890 grapple, chain and kicker that all runs off Contact: SAM ofEmail: a 4 cylinder Mercedes power Sam@lumbermensco.com Phone: unit. Has 888-401-6367 a 4’ chain saw EXT that 702 kicks

Lumbermens™  since 1986

❘

well built processor. Item ID 13820. Sam x702 Morgan

Band Sawmill

Item ID: 100005 Firewood Processor - This is WALKER aContact: Chomper Model 16 PDA

‘93 Barko 180B

‘08 ID: John Deere 335C Item 14077 Item ID: 14089 Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘95 John Deere C6 Woodmizer LT300 Tree Farmer Item ID: 99975 Item ID: 13920

Contact: AUSTIN Contact: Austin Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Ph: (888) 401-6367 x703 931-797-8029

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours. Timberjack 450C

ID: 99988 (excellentItem condition.). Item ID

Phone: 888-401-6367 EXT processor 707 automatice firewood

Contact: WALKER 13238. Chris x700 Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707Buncher 1995 Barko 775 B Feller OR 931-797-3915

low hours. Control panel includes

on injection pump. always started

Email: Walker@lumbermensco.com OR 931-797-3915

with John Deere power unit with

tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865. Meadows #2 Deluxe Sam x702Item ID: 14250

- Pumps recently redone. 400 hrs

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

Rogers 4 Headblock Circle Mill

LOGGING EQUIPMENT Contact: AUSTIN Email: Austin@lumbermensco.com BANDIT Phone: 888-401-6367 EXT 703 931-797-8029 1999 BanditOR 1900 Tracked Disc

meter dont work. The last 2 owners Item ID: 23205 have only used it to load trucks or Contact: SAM as a backup as needed. Has a CTR Email: Sam@lumbermensco.com delimber, grapple has been rebuilt. Phone: 888-401-6367 EXT 702

50% or better. 475 hp Cummins

Item ID 13694. Sam x702

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 -

CornellDiesel Edger 3412 Caterpillar engine Item ID: 33423 with 850 HP. 5300 hrs. Mill in

Contact: AUSTIN good condition. Just finished 10 Email: Austin@lumbermensco.com Phone: 888-401-6367 703 Acre clearing job, readyEXT to work! 931-797-8029 Remote control. Big production

 List  seLL  exchange  buy  save

Boom cylinders have minor leaks.

Buying?

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

Selling?

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

1990 Bell Super T - This Bell has lumbermensco.com

a brand new Duetz engine. Lever

888.401.6367

control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

Go Fast Run Around System

The Tree Item ID: 84282 that Started Contact: SAM it All! Email: Sam@lumbermensco.com

PUBLISHER

Woods Publishing

Precision Scragg

ADVERTISING SALES Item ID: 3607

Morris Woods Contact: AUSTIN ext. 704 (888) 401-6367 Email: Austin@lumbermensco.com morris@lumbermens.co Phone: 888-401-6367 EXT 703 931-797-8029 MARKETING DIRECTOR

Item ID: 13876

Hot Springs, ItemArkansas ID: 62784 Contact: AUSTIN www.arkloggers.com Contact: SAM Email: Austin@lumbermensco.com Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 703 ANNUAL GREAT LAKES 888-401-6367 EXT 702 OR 931-797-8029 72NDPhone:

LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Caterpillar generator - Low hours on the mill, electronic computer Set

Item ID: 12432

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Desjardin Shingle Mill

Fence Post Processing Sam x702Operation

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

2010 Cardinal HD Carriage Contact: AUSTIN Email: Austin@lumbermensco.com Carriages (Sawmill) - Cardinal Phone: 888-401-6367 EXT 703 931-797-8029 Carriage line it includes carriage

Item ID: 63655

** INFO LINK**

Item ID: 42175 CARRIAGES & DRIVES

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

MACK CHN613 Buck Equipment (AIM) ........ 36 Item ID: 761 Corley Mfg .............................. 32

Contact: AUSTIN Email: Austin@lumbermensco.com CRD Metalworks .................... 25 Phone: 888-401-6367 EXT 703 OR 931-797-8029 CW Mill-ArmorHog .............. 17

Ford Service Truck9 Mor barkF650 ..................................... Item ID: 92089 Multitek ................................... 12 Contact: AUSTIN Email: Austin@lumbermensco.com Piper's Saw Shop.................... 13 Phone: 888-401-6367 EXT 703 OR............................ 931-797-8029 40 Rotochopper

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Patriot GBN Nailer 14 Hurst Boiler ............................. Item ID: 99886 Iron Bull ................................... 21 Contact: SAM Kilgore Saw ............................. 22 Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 Lignomat ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE

❘

with onboard log turners, carriage drive, hyd pac for carriage,

48" Jackson bottom saw and 36" top saw 02’ Lumber Harvester Item ID: 1187

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

3 Strand Deck..... 10 Thomas IndustrialLog Controls Item ID: 14095 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Email: Austin@lumbermensco.com Universal Refiner ................... 23 Phone: 888-401-6367 EXT 703 OR 931-797-8029 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

M I S C E L L A N E O U S

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers Morbark Chipper and writers, the Lumberman's ID: 80356 Exchange, Item its principles and associates, are not held liable for Contact: AUSTINReproduction, errors or omissions. Email: Austin@lumbermensco.com inPhone: whole or part, is prohibited 888-401-6367 EXTwith 703 out written931-797-8029 consent. ©2017 Woods Publishing

Baker Bandmill is an extremely accurate machine Item ID: 96085 in ve1y good condition, Cuts 130 Contact: SAMalso has CLT presses. feet a minute Email: Sam@lumbermensco.com Item ID 888-401-6367 13876. Austin x703 Phone: EXT 702 S & W 125 Band Mill with

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

Austin Woods Contact: AUSTIN (888) 401-6367 ext. 703 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 austin@lumbermens.co OR 931-797-8029

Item ID: 100057 Lumberman's Exchange Box 1916 Contact:P.O. AUSTIN TN 38402 Email:Columbia, Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029 The Lumberman's Exchange is

is supported on both sides. This

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

Cornell Gang Saw

Ford 9000/Serco 8500 Send address changes to:

pressure guides. Top Casting wheel

Contact: AUSTIN WOOD EXPO Contact: AUSTIN Email: Austin@lumbermensco.com KENTUCKY Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Fri, 15 Sept - Sat, 16 Phone: 888-401-6367 EXTSept 703 OR 931-797-8029 OR 931-797-8029

Sam Wall (888) 401-6367 ext. 702 S&W 125 High Production Mill sam@lumbermens.co Item ID: 8019

POSTMASTER

it includes two sets of Mcdonough

Item ID: 99844

Donna Heninger

May be sent to morris@lumbermens.co

that go up and down, with airbags,

Selma, North Carolina www.midatlantic-logging-biomass ‘14 Hurdle 3-HD Block Sawmill MID-ATLANTIC Corinth American Sawmill Item ID: EXPO 13997 expo.com/ LOGGING & BIOMASS

EQUIPMENT REPS

AD SUBMISSIONS

machine, with air strain conveyers

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

DESIGN DIRECTOR

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

bells and whistles, its a production

Escanaba, Michigan

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

MAILING ADDRESS

BANDMILLS & HEADSAWS

PenduBand CutResaw Oﬀ Saw Danckaert - Roughly Item ID: 10632 10 hours on this machine since it Contact: AUSTINit has a 24foot in has been rebuilt, Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT deck 703 feed deck 20 foot out feed OR 931-797-8029 with 44 inch wheels, and all the

S A W M I L L

Phone: 888-401-6367 EXT 702 Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

SOUTHWEST FOREST PRODUCTS EXPO Model 12 Circle Saw

Mobile Dimensions Danchaert Band Resaw Fri, 25 August - Sat, 26 August

Nova Dry Kiln Item ID: 83618

Contact: SAM Email: Sam@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 702

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 43

Phone

315.284.4126 PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM TO VIEW DESCRIPTION,

“Precision Under Pressure”

Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

'07 Morbark 3800 Horizontal Grinder

2016 Barko Tree Chipper Item ID: 16688

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

‘06 Cord King Model 60

M I S C E L L A N E O U S

Item ID: 14068

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Item ID: 84439

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Morbark 23 disc chipper Item ID: 99944

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

'09 Mack Truck & H140 Trailer ‘16 Halverson Item ID: 74618 Skidsteer (DEMO)

Contact: Item ID:AUSTIN JW-909632 Email: Austin@lumbermensco.com Contact: J Williams EXT 703 Phone: 888-401-6367 931-797-8029 Ph: (888) 401-6367 x701

AM General M818 Army Truck Item ID: 14576

Contact: WALKER Email: Walker@lumbermensco.com ‘13 KMC 2500 Track Phone: 888-401-6367 EXT 707 Skidder or 931-797-3915

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

Marmon Picker Truck & Pup Trailer Item ID: 59341

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Peterson 4300 Ph: (888) 401-6367 x703

Drum Chipper

‘15 Cord King M44 Item ID: 13961

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Ford Altec Bucket Truck Best Value Portable Log Splitter

quality chips with patented ‘Cone’ OR 931-797-3915

Item ID: 347 - Small manufacturer in PA has Contact: SAM made the best valued log splitter. Email: Sam@lumbermensco.com Phone:logs 888-401-6367 EXT 702 Handles up to 32”. Uses

vans and produce 6 - 8 loads per

but electronic option is available.

Item ID: 99989 with 1700 hours, in very good Contact: WALKER

condition. Easily produces high Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

drum design. Can easily load 42’ day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

Morbark PS8 Post Peeler FIREWOOD PROCESSORS Item ID: 63148

2010 Shop Built Wood Processor Contact: SAM - ItEmail: has a Sam@lumbermensco.com 353 Detroit diesel, 40 Phone: EXT30702 inch insert888-401-6367 tooth circle saw, foot  Issue 364 403

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

2009 Bandit 90XP Pull-

homemade with a 10’ Behind processor Wood Chippers log deck. Has a hydraulic Item ID: 86220 grapple, chain and kicker that all runs off Contact: AUSTIN Austin@lumbermensco.com ofEmail: a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 unit. Has 931-797-8029 a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

well built processor. Item ID 13820.

2007 Morbark Chipper

Sam x702 Item ID: 9658

Firewood Processor - This is Contact: WALKER aEmail: Chomper Model 16 PDA Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 automatice firewood processor or 931-797-3915 with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased

new for $32,500. Item -ID 13865. Bandit Grinder Chipper Sam x702Item ID: 72593

‘93 Barko 180B

Item ID: 14077 Bandit 1850 Chipper Contact: Austin Item ID: 80543 Ph: (888) 401-6367 x703

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘95 John Deere C6

09 Rotobec Loader on Tree Farmer '87 Peterbuilt

Item ID: 13920 Item ID: 1101 Contact: Austin Contact: AUSTIN 401-6367 x703 Ph: (888) Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703OR 931-797-8029

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, original Prentice5,000 410EX truck hours. mounted

knuckle boom loader (excellent condition.). Item ID Item ID: 70691 13238. Chris x700

Contact: SAM 1995 Barko 775 B Feller Buncher Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with

2014 Morbark M20R approximately 1500 hours. Hour Forestry Track Chipper

LOGGING EQUIPMENT Contact: AUSTIN Email: Austin@lumbermensco.com BANDIT Phone: 888-401-6367 EXT 703 931-797-8029 1999 Bandit 1900 Tracked Disc

meter dont work. The last 2 owners Item ID: 46375 have only used it to load trucks or Contact: AUSTIN as a backup as needed. Has a CTR Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 delimber,931-797-8029 grapple has been rebuilt.

50% or better. 475 hp Cummins

Item ID 13694. Sam x702

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine

Morbark 6036 Chipper

with 850 HP. 5300 Mill in Item ID: hrs. 75143

good condition. Just finished 10 Contact: SAM Acre clearing job, ready to work! Email: Sam@lumbermensco.com Phone:control. 888-401-6367 EXT 702 Remote Big production

 List  seLL  exchange  buy  save

Boom cylinders have minor leaks. 94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam

Tajfun Firewood Processor x702 Item ID: 14249

BELL

Contact: AUSTIN 1990 Bell Super T - This Bell has Email: Austin@lumbermensco.com aPhone: brand new Duetz engine. Lever 888-401-6367 EXT 703 OR 931-797-8029 control, 33” bar, pump and tranny

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass expo.com/

** INFO LINK**

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 45

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

AD DIRECTORY Air System Mfg. ..............................................23 ..................................................828-757-3500 Anson ................................................................13 ..................................................800-663-7723 B & B Mfg. .......................................................26 ..................................................800-654-5320 B. H. Payne ......................................................28 ..................................................404-761-8711

‘93 Barko 180B

Bell's Machining..............................................27 ..................................................888-995-1965

‘16 Halverson H140 Buck Equipment (AIM) ..................................26 ..................................................800-803-3365 Contact: Austin Skidsteer (DEMO) Cord King .........................................................4 ................................................ 888-219-WOOD Blockbuster Inc. ..............................................24 ..................................................888-775-4883 Item ID: 14077

Ph: (888) 401-6367 x703

ItemMfg ID: JW-909632 .......................................................... 423-698-0284 Corley .......................................................9 Contact: J Williams CW Mill ............................................................8, 47 ..............................................800-743-3491

Ph: (888) 401-6367 x701 Ferntree Equipment & Distributi on ...........7 .....................................................778-222-9111 F&R Mfg. ..........................................................20 ..................................................800-355-1250 GoFast Manufacturing ..................................25 ..................................................800-854-7439 Great Lakes Logging & Heavy Equip. Expo ......19 ..................................................715-282-5828 Great Lakes Mfg. ............................................24 ..................................................877-248-5677 Holtec ...............................................................3 ......................................................holtecusa.com Hurdle Machine Works Inc ..........................11 ..................................................901-877-6251

‘95 John Deere C6 Tree Farmer Les Enterprises................................................6 .....................................................819-388-5499

Hurst Boiler. ....................................................16 ..................................................877-774-8778 Kilgore Saw Company ...................................25 ..................................................888-857-5153

Item ID: 13920 Lignomat ..........................................................21 ..................................................800-227-2105

‘13 KMC 2500 Track Skidder Metal Detectors, Inc......................................27 ..................................................541-345-7457

Austin Lumbermens....................................................32, 42,Contact: 45 ....................................888-401-6367 Ph: (888) 401-6367 x703 Menominee Saw.............................................29 ..................................................800-582-0470 Item ID: 14078 Mid-South Forestry Equipment Show .......23 .......................................midsouthforestry.org

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Contact: Austin Midwest Sharpening ................. ...................22 ..................................................231-924-5953 capacity!. Item ID 13421. Sam x702 Ph:tek (888) Multi North401-6367 America LLC x703 .......................18 ..................................................800-243-5438

BARKO

Pantron Automation, Inc. .............................46 ..................................................800-211-9468

1994 Barko 160B - Electric

Piper’s Saw Shop.......................... ..................8 .....................................................800-845-6075

off ontoManufacturing a conveyor.Inc...........................2 This is a very .....................................................877-563-8899 knuckleboom, 30' boom, 75hp Prolenc

Row wellElectric.....................................................22 built processor. Item ID 13820. ..................................................800-248-4479 motor, Rotobec continuous

Ryan's Equipment...........................................10 ..................................................989-427-2829 Sam x702 grapple, 5,000 original hours. Scandinavian Forestry Equipment ..............48 ..................................................717-793-3102

Firewood Processor - This is

(excellent condition.). Item ID

SFPA Expo .......................................................12 ..................................................SFPAexpo.com

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 403

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA 13238. Chris x700 Smith Sawmill Service ...................................1 .....................................................800-598-6344

automatice firewood processor 1995 Barko 775 B Feller Buncher Tajfun USA .......................................................15 ..................................................800-634-5557 The Shop .................................................21 ..................................................603-381-4587 withSaw John Deere power unit with - Pumps recently redone. 400 hrs

Universal ReﬁControl ner ............................................17 low hours. panel includes ..................................................800-277-8068 on injection pump. always started Woodlandia .....................................................14 ..................................................877-508-8777

tach, oil pressure, water temp and PLEASE PRINT amp gauges. Cuts logs up to 16”.

good. in good working order. 22in JULYgreat. 2021 kohing head. head works

you to Change your Address One If owner andneed comes with all Item ID 13185. Sam x702 or

Addand Your Name to our1999 mailing list, manuals receipts. Purchased Barko 160D - newthen engine with please complete this form and mail to:

new for $32,500. Item ID 13865. Sam x702

approximately 1500 hours. Hour

Lumbermens™meter Magazine dont work. The last 2 owners P.O. Box have 1916 EQUIPMENT only used it to load trucks or Columbia, TN 38402

LOGGING BANDIT

Handles logs up to 32”. Uses

as a backup as needed. Has a CTR ❑ Please Add ❑ Please Change ❑ grapple Pleasehas Remove 1999 Bandit 1900 Tracked Disc delimber, been rebuilt.

but electronic option is available.

50% or better. 475 hp Cummins Item ID 13694. Sam x702 Company Name*: ________________________________________________________

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under at required Boom have minor leaks. *Company nameCarriage and address to cylinders process your change. Diesel. 7500 Hours. One owner.

94 Barko 275 - Excellent value

Individual Name: _________________________________________________________

Well maintained. Item ID 13294.

with low at hours at 3,500. 5.9

Address:________________________________________________________________

Sam x702

CUMMINS continuous grapple.

_______________________________________________________________________

2004 Bandit Beast Model 4680 -

Runs Great!. Item ID 13740. Sam

City: ___________________________________________________________________ 3412 Caterpillar Diesel engine x702 State: __________________________________________________________________ with 850 HP. 5300 hrs. Mill in BELL Zip:____________________________________________________________________ good condition. Just finished 10 1990 Bell Super T - This Bell has

Acre clearing job, ready to work! a brand new Duetz engine. Lever Phone: _________________________________________________________________

Remote control. Big production control, 33” bar, pump and tranny Email:__________________________________________________________________

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass expo.com/

** INFO LINK**

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 47

LUMBERMENS™ MAGAZINE 1116 West 7th Street, Suite 297 Columbia, Tennessee 38401

PRSRT STD. U.S. Postage PAID Permit No. 212 Pulaski, TN